New Upstream Snapshot - gnome-screensaver
Ready changes
Summary
Merged new upstream version: 3.6.1+git20161121.1.688572a (was: 3.6.1).
Resulting package
Built on 2023-02-08T15:47 (took 10m0s)
The resulting binary packages can be installed (if you have the apt repository enabled) by running one of:
apt install -t fresh-snapshots gnome-screensaver-dbgsymapt install -t fresh-snapshots gnome-screensaver
Lintian Result
- gnome-screensaver-dbgsym_3.6.1+git20161121.1.688572a-1~jan+nus1_amd64.deb
- gnome-screensaver_3.6.1+git20161121.1.688572a-1~jan+nus1.dsc
- gnome-screensaver_3.6.1+git20161121.1.688572a-1~jan+nus1_amd64.buildinfo
- gnome-screensaver_3.6.1+git20161121.1.688572a-1~jan+nus1_amd64.deb
- gnome-screensaver_3.6.1+git20161121.1.688572a-1~jan+nus1_amd64.changes
Diff
diff --git a/INSTALL b/INSTALL
index a1e89e1..e82fd21 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,8 +1,8 @@
Installation Instructions
*************************
-Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
-Inc.
+ Copyright (C) 1994-1996, 1999-2002, 2004-2017, 2020-2021 Free
+Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
@@ -12,97 +12,96 @@ without warranty of any kind.
Basic Installation
==================
- Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package. The following
-more-detailed instructions are generic; see the `README' file for
+ Briefly, the shell command './configure && make && make install'
+should configure, build, and install this package. The following
+more-detailed instructions are generic; see the 'README' file for
instructions specific to this package. Some packages provide this
-`INSTALL' file but do not implement all of the features documented
+'INSTALL' file but do not implement all of the features documented
below. The lack of an optional feature in a given package is not
necessarily a bug. More recommendations for GNU packages can be found
in *note Makefile Conventions: (standards)Makefile Conventions.
- The `configure' shell script attempts to guess correct values for
+ The 'configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
+those values to create a 'Makefile' in each directory of the package.
+It may also create one or more '.h' files containing system-dependent
+definitions. Finally, it creates a shell script 'config.status' that
you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
+file 'config.log' containing compiler output (useful mainly for
+debugging 'configure').
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
+ It can also use an optional file (typically called 'config.cache' and
+enabled with '--cache-file=config.cache' or simply '-C') that saves the
+results of its tests to speed up reconfiguring. Caching is disabled by
+default to prevent problems with accidental use of stale cache files.
If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
+to figure out how 'configure' could check whether to do them, and mail
+diffs or instructions to the address given in the 'README' so they can
be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
+some point 'config.cache' contains results you don't want to keep, you
may remove or edit it.
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
+ The file 'configure.ac' (or 'configure.in') is used to create
+'configure' by a program called 'autoconf'. You need 'configure.ac' if
+you want to change it or regenerate 'configure' using a newer version of
+'autoconf'.
The simplest way to compile this package is:
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system.
+ 1. 'cd' to the directory containing the package's source code and type
+ './configure' to configure the package for your system.
- Running `configure' might take a while. While running, it prints
+ Running 'configure' might take a while. While running, it prints
some messages telling which features it is checking for.
- 2. Type `make' to compile the package.
+ 2. Type 'make' to compile the package.
- 3. Optionally, type `make check' to run any self-tests that come with
+ 3. Optionally, type 'make check' to run any self-tests that come with
the package, generally using the just-built uninstalled binaries.
- 4. Type `make install' to install the programs and any data files and
+ 4. Type 'make install' to install the programs and any data files and
documentation. When installing into a prefix owned by root, it is
recommended that the package be configured and built as a regular
- user, and only the `make install' phase executed with root
+ user, and only the 'make install' phase executed with root
privileges.
- 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ 5. Optionally, type 'make installcheck' to repeat any self-tests, but
this time using the binaries in their final installed location.
This target does not install anything. Running this target as a
- regular user, particularly if the prior `make install' required
+ regular user, particularly if the prior 'make install' required
root privileges, verifies that the installation completed
correctly.
6. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
+ source code directory by typing 'make clean'. To also remove the
+ files that 'configure' created (so you can compile the package for
+ a different kind of computer), type 'make distclean'. There is
+ also a 'make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
- 7. Often, you can also type `make uninstall' to remove the installed
+ 7. Often, you can also type 'make uninstall' to remove the installed
files again. In practice, not all packages have tested that
uninstallation works correctly, even though it is required by the
GNU Coding Standards.
- 8. Some packages, particularly those that use Automake, provide `make
+ 8. Some packages, particularly those that use Automake, provide 'make
distcheck', which can by used by developers to test that all other
- targets like `make install' and `make uninstall' work correctly.
+ targets like 'make install' and 'make uninstall' work correctly.
This target is generally not run by end users.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
+the 'configure' script does not know about. Run './configure --help'
for details on some of the pertinent environment variables.
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
+ You can give 'configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here is
+an example:
./configure CC=c99 CFLAGS=-g LIBS=-lposix
@@ -113,21 +112,21 @@ Compiling For Multiple Architectures
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
-own directory. To do this, you can use GNU `make'. `cd' to the
+own directory. To do this, you can use GNU 'make'. 'cd' to the
directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'. This
-is known as a "VPATH" build.
+the 'configure' script. 'configure' automatically checks for the source
+code in the directory that 'configure' is in and in '..'. This is known
+as a "VPATH" build.
- With a non-GNU `make', it is safer to compile the package for one
+ With a non-GNU 'make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
-installed the package for one architecture, use `make distclean' before
+installed the package for one architecture, use 'make distclean' before
reconfiguring for another architecture.
On MacOS X 10.5 and later systems, you can create libraries and
executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor. Like
+"universal" binaries--by specifying multiple '-arch' options to the
+compiler but only a single '-arch' option to the preprocessor. Like
this:
./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
@@ -136,105 +135,104 @@ this:
This is not guaranteed to produce working output in all cases, you
may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
+using the 'lipo' tool if you have problems.
Installation Names
==================
- By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc. You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
+ By default, 'make install' installs the package's commands under
+'/usr/local/bin', include files under '/usr/local/include', etc. You
+can specify an installation prefix other than '/usr/local' by giving
+'configure' the option '--prefix=PREFIX', where PREFIX must be an
absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+pass the option '--exec-prefix=PREFIX' to 'configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them. In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
+options like '--bindir=DIR' to specify different values for particular
+kinds of files. Run 'configure --help' for a list of the directories
+you can set and what kinds of files go in them. In general, the default
+for these options is expressed in terms of '${prefix}', so that
+specifying just '--prefix' will affect all of the other directory
specifications that were not explicitly provided.
The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
+correct locations to 'configure'; however, many packages provide one or
both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
+'make install' command line to change installation locations without
having to reconfigure or recompile.
The first method involves providing an override variable for each
-affected directory. For example, `make install
+affected directory. For example, 'make install
prefix=/alternate/directory' will choose an alternate location for all
directory configuration variables that were expressed in terms of
-`${prefix}'. Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated. The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
- The second method involves providing the `DESTDIR' variable. For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names. The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
+'${prefix}'. Any directories that were specified during 'configure',
+but not in terms of '${prefix}', must each be overridden at install time
+for the entire installation to be relocated. The approach of makefile
+variable overrides for each directory variable is required by the GNU
+Coding Standards, and ideally causes no recompilation. However, some
+platforms have known limitations with the semantics of shared libraries
+that end up requiring recompilation when using this method, particularly
+noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the 'DESTDIR' variable. For
+example, 'make install DESTDIR=/alternate/directory' will prepend
+'/alternate/directory' before all installation names. The approach of
+'DESTDIR' overrides is not required by the GNU Coding Standards, and
does not work on platforms that have drive letters. On the other hand,
it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
+when some directory options were not specified in terms of '${prefix}'
+at 'configure' time.
Optional Features
=================
If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
+with an extra prefix or suffix on their names by giving 'configure' the
+option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'.
+
+ Some packages pay attention to '--enable-FEATURE' options to
+'configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to '--with-PACKAGE' options, where PACKAGE
+is something like 'gnu-as' or 'x' (for the X Window System). The
+'README' should mention any '--enable-' and '--with-' options that the
package recognizes.
- For packages that use the X Window System, `configure' can usually
+ For packages that use the X Window System, 'configure' can usually
find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
+you can use the 'configure' options '--x-includes=DIR' and
+'--x-libraries=DIR' to specify their locations.
Some packages offer the ability to configure how verbose the
-execution of `make' will be. For these packages, running `./configure
+execution of 'make' will be. For these packages, running './configure
--enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
+overridden with 'make V=1'; while running './configure
--disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
+overridden with 'make V=0'.
Particular systems
==================
- On HP-UX, the default C compiler is not ANSI C compatible. If GNU
-CC is not installed, it is recommended to use the following options in
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC
+is not installed, it is recommended to use the following options in
order to use an ANSI C compiler:
./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
- HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved. Use GNU `make'
-instead.
+ HP-UX 'make' updates targets which have the same timestamps as their
+prerequisites, which makes it generally unusable when shipped generated
+files such as 'configure' are involved. Use GNU 'make' instead.
On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file. The option `-nodtk' can be used as
-a workaround. If GNU CC is not installed, it is therefore recommended
-to try
+parse its '<wchar.h>' header file. The option '-nodtk' can be used as a
+workaround. If GNU CC is not installed, it is therefore recommended to
+try
./configure CC="cc"
@@ -242,26 +240,26 @@ and if that doesn't work, try
./configure CC="cc -nodtk"
- On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+ On Solaris, don't put '/usr/ucb' early in your 'PATH'. This
directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
+these programs are available in '/usr/bin'. So, if you need '/usr/ucb'
+in your 'PATH', put it _after_ '/usr/bin'.
- On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'. It is recommended to use the following options:
+ On Haiku, software installed for all users goes in '/boot/common',
+not '/usr/local'. It is recommended to use the following options:
./configure --prefix=/boot/common
Specifying the System Type
==========================
- There may be some features `configure' cannot figure out
+ There may be some features 'configure' cannot figure out
automatically, but needs to determine by the type of machine the package
will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
+_same_ architectures, 'configure' can figure that out, but if it prints
a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
+'--build=TYPE' option. TYPE can either be a short name for the system
+type, such as 'sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
@@ -270,101 +268,101 @@ where SYSTEM can have one of these forms:
OS
KERNEL-OS
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
+ See the file 'config.sub' for the possible values of each field. If
+'config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
+use the option '--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
+eventually be run) with '--host=TYPE'.
Sharing Defaults
================
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
+ If you want to set default values for 'configure' scripts to share,
+you can create a site shell script called 'config.site' that gives
+default values for variables like 'CC', 'cache_file', and 'prefix'.
+'configure' looks for 'PREFIX/share/config.site' if it exists, then
+'PREFIX/etc/config.site' if it exists. Or, you can set the
+'CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all 'configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
+environment passed to 'configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
+them in the 'configure' command line, using 'VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
-causes the specified `gcc' to be used as the C compiler (unless it is
+causes the specified 'gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug. Until the bug is fixed you can use this workaround:
+Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an
+Autoconf limitation. Until the limitation is lifted, you can use this
+workaround:
- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+ CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
-`configure' Invocation
+'configure' Invocation
======================
- `configure' recognizes the following options to control how it
+ 'configure' recognizes the following options to control how it
operates.
-`--help'
-`-h'
- Print a summary of all of the options to `configure', and exit.
+'--help'
+'-h'
+ Print a summary of all of the options to 'configure', and exit.
-`--help=short'
-`--help=recursive'
+'--help=short'
+'--help=recursive'
Print a summary of the options unique to this package's
- `configure', and exit. The `short' variant lists options used
- only in the top level, while the `recursive' variant lists options
- also present in any nested packages.
+ 'configure', and exit. The 'short' variant lists options used only
+ in the top level, while the 'recursive' variant lists options also
+ present in any nested packages.
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
+'--version'
+'-V'
+ Print the version of Autoconf used to generate the 'configure'
script, and exit.
-`--cache-file=FILE'
+'--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
+ traditionally 'config.cache'. FILE defaults to '/dev/null' to
disable caching.
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
+'--config-cache'
+'-C'
+ Alias for '--cache-file=config.cache'.
-`--quiet'
-`--silent'
-`-q'
+'--quiet'
+'--silent'
+'-q'
Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
+ suppress all normal output, redirect it to '/dev/null' (any error
messages will still be shown).
-`--srcdir=DIR'
+'--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
+ 'configure' can determine that directory automatically.
-`--prefix=DIR'
- Use DIR as the installation prefix. *note Installation Names::
- for more details, including other options available for fine-tuning
- the installation locations.
+'--prefix=DIR'
+ Use DIR as the installation prefix. *note Installation Names:: for
+ more details, including other options available for fine-tuning the
+ installation locations.
-`--no-create'
-`-n'
+'--no-create'
+'-n'
Run the configure checks, but stop before creating any output
files.
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
-
+'configure' also accepts some other, not widely useful, options. Run
+'configure --help' for more details.
diff --git a/Makefile.in b/Makefile.in
index d8bdc80..4d5d161 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# Makefile.in generated by automake 1.16.4 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -16,23 +16,61 @@
# This file will be processed with automake-1.7 to create Makefile.in
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
esac; \
- test $$am__dry = yes; \
- }
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
@@ -52,18 +90,15 @@ POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(srcdir)/config.h.in \
- $(top_srcdir)/configure AUTHORS COPYING COPYING.LIB ChangeLog \
- INSTALL NEWS compile config.guess config.sub depcomp \
- install-sh ltmain.sh missing mkinstalldirs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
@@ -81,13 +116,14 @@ am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
@@ -95,13 +131,34 @@ am__can_run_installinfo = \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- cscope distdir dist dist-all distcheck
-ETAGS = etags
-CTAGS = ctags
-CSCOPE = cscope
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+ cscope distdir distdir-am dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
+ config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in AUTHORS \
+ COPYING COPYING.LIB ChangeLog INSTALL NEWS README compile \
+ config.guess config.sub install-sh ltmain.sh missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
@@ -140,6 +197,8 @@ am__relativize = \
GZIP_ENV = --best
DIST_ARCHIVES = $(distdir).tar.xz
DIST_TARGETS = dist-xz
+# Exists only to be overridden by the user if desired.
+AM_DISTCHECK_DVI_TARGET = dvi
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
@@ -162,6 +221,8 @@ CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DBUS_CFLAGS = @DBUS_CFLAGS@
@@ -176,6 +237,7 @@ ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
+ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
EXPANDED_BINDIR = @EXPANDED_BINDIR@
EXPANDED_DATADIR = @EXPANDED_DATADIR@
@@ -216,6 +278,7 @@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBGNOMEKBDUI_CFLAGS = @LIBGNOMEKBDUI_CFLAGS@
@@ -226,6 +289,7 @@ LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -323,6 +387,7 @@ pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
@@ -399,15 +464,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -420,8 +484,8 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__aclocal_m4_deps):
config.h: stamp-h1
- @if test ! -f $@; then rm -f stamp-h1; else :; fi
- @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+ @test -f $@ || rm -f stamp-h1
+ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
@@ -449,14 +513,13 @@ distclean-libtool:
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
+$(am__recursive_targets):
+ @fail=; \
+ if $(am__make_keepgoing); then \
+ failcom='fail=yes'; \
+ else \
+ failcom='exit 1'; \
+ fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
@@ -477,31 +540,13 @@ $(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-cscopelist-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
- done
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -517,12 +562,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
@@ -534,15 +574,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$$unique; \
fi; \
fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
@@ -551,18 +587,16 @@ GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
-
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-
clean-cscope:
-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
-cscope.files: clean-cscope cscopelist-recursive cscopelist
-
-cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
@@ -578,8 +612,10 @@ cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+distdir: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) distdir-am
-distdir: $(DISTFILES)
+distdir-am: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
@@ -644,7 +680,7 @@ distdir: $(DISTFILES)
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
@@ -658,12 +694,22 @@ dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
+dist-zstd: distdir
+ tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
+ $(am__post_remove_distdir)
+
dist-tarZ: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
@@ -681,7 +727,7 @@ dist dist-all:
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
@@ -691,24 +737,27 @@ distcheck: dist
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
+ *.tar.zst*) \
+ zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
esac
- chmod -R a-w $(distdir); chmod u+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
+ chmod -R a-w $(distdir)
+ chmod u+w $(distdir)
+ mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ && $(am__cd) $(distdir)/_build/sub \
+ && ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
@@ -866,26 +915,26 @@ ps-am:
uninstall-am:
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
- cscopelist-recursive ctags-recursive install-am install-strip \
- tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am am--refresh check check-am clean clean-cscope \
- clean-generic clean-libtool cscope cscopelist \
- cscopelist-recursive ctags ctags-recursive dist dist-all \
- dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ dist-xz \
- dist-zip distcheck distclean distclean-generic distclean-hdr \
- distclean-libtool distclean-tags distcleancheck distdir \
- distuninstallcheck dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
- ps ps-am tags tags-recursive uninstall uninstall-am
+.MAKE: $(am__recursive_targets) all install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+ am--refresh check check-am clean clean-cscope clean-generic \
+ clean-libtool cscope cscopelist-am ctags ctags-am dist \
+ dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
+ dist-xz dist-zip dist-zstd distcheck distclean \
+ distclean-generic distclean-hdr distclean-libtool \
+ distclean-tags distcleancheck distdir distuninstallcheck dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs installdirs-am \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
-include $(top_srcdir)/git.mk
diff --git a/NEWS b/NEWS
index b80ff90..6ab10e1 100644
--- a/NEWS
+++ b/NEWS
@@ -1,9 +1,3 @@
-==============
-Version 3.6.1
-==============
-
-- Translation updates
-
==============
Version 3.6.0
==============
diff --git a/aclocal.m4 b/aclocal.m4
index 1f28585..858a849 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -1,6 +1,6 @@
-# generated automatically by aclocal 1.12.2 -*- Autoconf -*-
+# generated automatically by aclocal 1.16.4 -*- Autoconf -*-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Copyright (C) 1996-2021 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -11,6 +11,7 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
@@ -46,7 +47,10 @@ To do so, use the procedure documented by the package, typically 'autoreconf'.])
#
# Modified to require ngettext
# Matthias Clasen <mclasen@redhat.com> 08/06/2004
-#
+
+# Increment this whenever this file is changed.
+#serial 1
+
# We need this here as well, since someone might use autoconf-2.5x
# to configure GLib then an older version to configure a package
# using AM_GLIB_GNU_GETTEXT
@@ -118,6 +122,51 @@ fi
AC_SUBST($1)dnl
])
+dnl Checks for special options needed on Mac OS X.
+dnl Defines INTL_MACOSX_LIBS.
+dnl
+dnl Copied from intlmacosx.m4 in gettext, GPL.
+dnl Copyright (C) 2004-2013 Free Software Foundation, Inc.
+glib_DEFUN([glib_gt_INTL_MACOSX],
+[
+ dnl Check for API introduced in Mac OS X 10.2.
+ AC_CACHE_CHECK([for CFPreferencesCopyAppValue],
+ [gt_cv_func_CFPreferencesCopyAppValue],
+ [gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ AC_LINK_IFELSE(
+ [AC_LANG_PROGRAM(
+ [[#include <CoreFoundation/CFPreferences.h>]],
+ [[CFPreferencesCopyAppValue(NULL, NULL)]])],
+ [gt_cv_func_CFPreferencesCopyAppValue=yes],
+ [gt_cv_func_CFPreferencesCopyAppValue=no])
+ LIBS="$gt_save_LIBS"])
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+ AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1],
+ [Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in the CoreFoundation framework.])
+ fi
+ dnl Check for API introduced in Mac OS X 10.3.
+ AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent],
+ [gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ AC_LINK_IFELSE(
+ [AC_LANG_PROGRAM(
+ [[#include <CoreFoundation/CFLocale.h>]],
+ [[CFLocaleCopyCurrent();]])],
+ [gt_cv_func_CFLocaleCopyCurrent=yes],
+ [gt_cv_func_CFLocaleCopyCurrent=no])
+ LIBS="$gt_save_LIBS"])
+ if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+ AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1],
+ [Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the CoreFoundation framework.])
+ fi
+ INTL_MACOSX_LIBS=
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+ INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+ fi
+ AC_SUBST([INTL_MACOSX_LIBS])
+])
+
# GLIB_WITH_NLS
#-----------------
glib_DEFUN([GLIB_WITH_NLS],
@@ -131,6 +180,8 @@ glib_DEFUN([GLIB_WITH_NLS],
XGETTEXT=:
INTLLIBS=
+ glib_gt_INTL_MACOSX
+
AC_CHECK_HEADER(libintl.h,
[gt_cv_func_dgettext_libintl="no"
libintl_extra_libs=""
@@ -214,7 +265,7 @@ glib_DEFUN([GLIB_WITH_NLS],
fi
if test "$gt_cv_func_dgettext_libintl" = "yes"; then
- INTLLIBS="-lintl $libintl_extra_libs"
+ INTLLIBS="-lintl $libintl_extra_libs $INTL_MACOSX_LIBS"
fi
if test "$gt_cv_have_gettext" = "yes"; then
@@ -334,9 +385,8 @@ msgstr ""
# on various variables needed by the Makefile.in.in installed by
# glib-gettextize.
dnl
-glib_DEFUN([GLIB_GNU_GETTEXT],
+AU_DEFUN([GLIB_GNU_GETTEXT],
[AC_REQUIRE([AC_PROG_CC])dnl
- AC_REQUIRE([AC_HEADER_STDC])dnl
GLIB_LC_MESSAGES
GLIB_WITH_NLS
@@ -405,7 +455,8 @@ glib_DEFUN([GLIB_GNU_GETTEXT],
rm -f po/POTFILES
sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
< $srcdir/po/POTFILES.in > po/POTFILES
- ])
+ ],
+ [[$0: This macro is deprecated. You should use upstream gettext instead.]])
# AM_GLIB_DEFINE_LOCALEDIR(VARIABLE)
# -------------------------------
@@ -456,20 +507,30 @@ sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD
fi])
+# gnome-compiler-flags.m4
+#
+# serial 4
+#
+
dnl GNOME_COMPILE_WARNINGS
-dnl Turn on many useful compiler warnings
+dnl Turn on many useful compiler warnings and substitute the result into
+dnl WARN_CFLAGS
dnl For now, only works on GCC
-AC_DEFUN([GNOME_COMPILE_WARNINGS],[
+dnl Pass the default value of the --enable-compile-warnings configure option as
+dnl the first argument to the macro, defaulting to 'yes'.
+dnl Additional warning/error flags can be passed as an optional second argument.
+dnl
+dnl For example: GNOME_COMPILE_WARNINGS([maximum],[-Werror=some-flag -Wfoobar])
+AU_DEFUN([GNOME_COMPILE_WARNINGS],[
dnl ******************************
dnl More compiler warnings
dnl ******************************
AC_ARG_ENABLE(compile-warnings,
- AC_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@],
+ AS_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@],
[Turn on compiler warnings]),,
[enable_compile_warnings="m4_default([$1],[yes])"])
- warnCFLAGS=
if test "x$GCC" != xyes; then
enable_compile_warnings=no
fi
@@ -477,49 +538,76 @@ AC_DEFUN([GNOME_COMPILE_WARNINGS],[
warning_flags=
realsave_CFLAGS="$CFLAGS"
+ dnl These are warning flags that aren't marked as fatal. Can be
+ dnl overridden on a per-project basis with -Wno-foo.
+ base_warn_flags=" \
+ -Wall \
+ -Wstrict-prototypes \
+ -Wnested-externs \
+ "
+
+ dnl These compiler flags typically indicate very broken or suspicious
+ dnl code. Some of them such as implicit-function-declaration are
+ dnl just not default because gcc compiles a lot of legacy code.
+ dnl We choose to make this set into explicit errors.
+ base_error_flags=" \
+ -Werror=missing-prototypes \
+ -Werror=implicit-function-declaration \
+ -Werror=pointer-arith \
+ -Werror=init-self \
+ -Werror=format-security \
+ -Werror=format=2 \
+ -Werror=missing-include-dirs \
+ -Werror=return-type \
+ "
+
+ dnl Additional warning or error flags provided by the module author to
+ dnl allow stricter standards to be imposed on a per-module basis.
+ dnl The author can pass -W or -Werror flags here as they see fit.
+ additional_flags="m4_default([$2],[])"
+
case "$enable_compile_warnings" in
no)
- warning_flags=
- ;;
+ warning_flags="-w"
+ ;;
minimum)
- warning_flags="-Wall"
- ;;
- yes)
- warning_flags="-Wall -Wmissing-prototypes"
- ;;
- maximum|error)
- warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith"
- CFLAGS="$warning_flags $CFLAGS"
- for option in -Wno-sign-compare; do
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $option"
- AC_MSG_CHECKING([whether gcc understands $option])
- AC_TRY_COMPILE([], [],
- has_option=yes,
- has_option=no,)
- CFLAGS="$SAVE_CFLAGS"
- AC_MSG_RESULT($has_option)
- if test $has_option = yes; then
- warning_flags="$warning_flags $option"
- fi
- unset has_option
- unset SAVE_CFLAGS
- done
- unset option
- if test "$enable_compile_warnings" = "error" ; then
- warning_flags="$warning_flags -Werror"
- fi
- ;;
+ warning_flags="-Wall"
+ ;;
+ yes|maximum|error)
+ warning_flags="$base_warn_flags $base_error_flags $additional_flags"
+ ;;
*)
- AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings)
- ;;
+ AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings)
+ ;;
esac
+
+ if test "$enable_compile_warnings" = "error" ; then
+ warning_flags="$warning_flags -Werror"
+ fi
+
+ dnl Check whether GCC supports the warning options
+ for option in $warning_flags; do
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $option"
+ AC_MSG_CHECKING([whether gcc understands $option])
+ AC_TRY_COMPILE([], [],
+ has_option=yes,
+ has_option=no,)
+ CFLAGS="$save_CFLAGS"
+ AC_MSG_RESULT([$has_option])
+ if test $has_option = yes; then
+ tested_warning_flags="$tested_warning_flags $option"
+ fi
+ unset has_option
+ unset save_CFLAGS
+ done
+ unset option
CFLAGS="$realsave_CFLAGS"
AC_MSG_CHECKING(what warning flags to pass to the C compiler)
- AC_MSG_RESULT($warning_flags)
+ AC_MSG_RESULT($tested_warning_flags)
AC_ARG_ENABLE(iso-c,
- AC_HELP_STRING([--enable-iso-c],
+ AS_HELP_STRING([--enable-iso-c],
[Try to warn if code is not ISO C ]),,
[enable_iso_c=no])
@@ -539,15 +627,18 @@ AC_DEFUN([GNOME_COMPILE_WARNINGS],[
fi
AC_MSG_RESULT($complCFLAGS)
- WARN_CFLAGS="$warning_flags $complCFLAGS"
+ WARN_CFLAGS="$tested_warning_flags $complCFLAGS"
AC_SUBST(WARN_CFLAGS)
-])
+],
+[[$0: This macro is deprecated. You should use AX_COMPILER_FLAGS instead and
+eliminate use of --enable-iso-c.
+See: http://www.gnu.org/software/autoconf-archive/ax_compiler_flags.html#ax_compiler_flags]])
dnl For C++, do basically the same thing.
-AC_DEFUN([GNOME_CXX_WARNINGS],[
+AU_DEFUN([GNOME_CXX_WARNINGS],[
AC_ARG_ENABLE(cxx-warnings,
- AC_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@]
+ AS_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@]
[Turn on compiler warnings.]),,
[enable_cxx_warnings="m4_default([$1],[minimum])"])
@@ -573,7 +664,7 @@ AC_DEFUN([GNOME_CXX_WARNINGS],[
AC_MSG_RESULT($warnCXXFLAGS)
AC_ARG_ENABLE(iso-cxx,
- AC_HELP_STRING([--enable-iso-cxx],
+ AS_HELP_STRING([--enable-iso-cxx],
[Try to warn if code is not ISO C++ ]),,
[enable_iso_cxx=no])
@@ -596,7 +687,13 @@ AC_DEFUN([GNOME_CXX_WARNINGS],[
WARN_CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS"
AC_SUBST(WARN_CXXFLAGS)
-])
+],
+[[$0: This macro is deprecated. You should use AX_COMPILER_FLAGS instead and
+eliminate use of --enable-iso-cxx.
+See: http://www.gnu.org/software/autoconf-archive/ax_compiler_flags.html#ax_compiler_flags]])
+
+# Increment this whenever this file is changed.
+#serial 2
dnl GLIB_GSETTINGS
dnl Defines GSETTINGS_SCHEMAS_INSTALL which controls whether
@@ -605,6 +702,10 @@ dnl
AC_DEFUN([GLIB_GSETTINGS],
[
+ dnl We can't use PKG_PREREQ because that needs 0.29.
+ m4_ifndef([PKG_PROG_PKG_CONFIG],
+ [pkg.m4 version 0.28 or later is required])
+
m4_pattern_allow([AM_V_GEN])
AC_ARG_ENABLE(schemas-compile,
AS_HELP_STRING([--disable-schemas-compile],
@@ -617,11 +718,9 @@ AC_DEFUN([GLIB_GSETTINGS],
AC_SUBST([GSETTINGS_DISABLE_SCHEMAS_COMPILE])
PKG_PROG_PKG_CONFIG([0.16])
AC_SUBST(gsettingsschemadir, [${datadir}/glib-2.0/schemas])
- if test x$cross_compiling != xyes; then
- GLIB_COMPILE_SCHEMAS=`$PKG_CONFIG --variable glib_compile_schemas gio-2.0`
- else
- AC_PATH_PROG(GLIB_COMPILE_SCHEMAS, glib-compile-schemas)
- fi
+ AS_IF([test x$cross_compiling != xyes],
+ [PKG_CHECK_VAR([GLIB_COMPILE_SCHEMAS], [gio-2.0], [glib_compile_schemas])],
+ [AC_PATH_PROG([GLIB_COMPILE_SCHEMAS], [glib-compile-schemas])])
AC_SUBST(GLIB_COMPILE_SCHEMAS)
if test "x$GLIB_COMPILE_SCHEMAS" = "x"; then
ifelse([$2],,[AC_MSG_ERROR([glib-compile-schemas not found.])],[$2])
@@ -637,7 +736,7 @@ mostlyclean-am: clean-gsettings-schemas
gsettings__enum_file = $(addsuffix .enums.xml,$(gsettings_ENUM_NAMESPACE))
%.gschema.valid: %.gschema.xml $(gsettings__enum_file)
- $(AM_V_GEN) if test -f "$<"; then d=; else d="$(srcdir)/"; fi; $(GLIB_COMPILE_SCHEMAS) --strict --dry-run $(addprefix --schema-file=,$(gsettings__enum_file)) --schema-file=$${d}$< && touch [$]@
+ $(AM_V_GEN) $(GLIB_COMPILE_SCHEMAS) --strict --dry-run $(addprefix --schema-file=,$(gsettings__enum_file)) --schema-file=$< && mkdir -p [$](@D) && touch [$]@
all-am: $(gsettings_SCHEMAS:.xml=.valid)
uninstall-am: uninstall-gsettings-schemas
@@ -816,31 +915,6 @@ fi
# Substitute ALL_LINGUAS so we can use it in po/Makefile
AC_SUBST(ALL_LINGUAS)
-# Set DATADIRNAME correctly if it is not set yet
-# (copied from glib-gettext.m4)
-if test -z "$DATADIRNAME"; then
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM([[]],
- [[extern int _nl_msg_cat_cntr;
- return _nl_msg_cat_cntr]])],
- [DATADIRNAME=share],
- [case $host in
- *-*-solaris*)
- dnl On Solaris, if bind_textdomain_codeset is in libc,
- dnl GNU format message catalog is always supported,
- dnl since both are added to the libc all together.
- dnl Hence, we'd like to go with DATADIRNAME=share
- dnl in this case.
- AC_CHECK_FUNC(bind_textdomain_codeset,
- [DATADIRNAME=share], [DATADIRNAME=lib])
- ;;
- *)
- [DATADIRNAME=lib]
- ;;
- esac])
-fi
-AC_SUBST(DATADIRNAME)
-
IT_PO_SUBDIR([po])
])
@@ -899,9 +973,7 @@ AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL])
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is free software; the Free Software Foundation gives
@@ -909,36 +981,30 @@ AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL])
# modifications, as long as this notice is preserved.
m4_define([_LT_COPYING], [dnl
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
-#
-# This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
])
-# serial 57 LT_INIT
+# serial 58 LT_INIT
# LT_PREREQ(VERSION)
@@ -966,7 +1032,7 @@ esac
# LT_INIT([OPTIONS])
# ------------------
AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK
AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
AC_BEFORE([$0], [LT_LANG])dnl
AC_BEFORE([$0], [LT_OUTPUT])dnl
@@ -990,7 +1056,7 @@ dnl Parse OPTIONS
_LT_SET_OPTIONS([$0], [$1])
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -1010,26 +1076,43 @@ dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+# _LT_PREPARE_CC_BASENAME
+# -----------------------
+m4_defun([_LT_PREPARE_CC_BASENAME], [
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in @S|@*""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+])# _LT_PREPARE_CC_BASENAME
+
+
# _LT_CC_BASENAME(CC)
# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
+# but that macro is also expanded into generated libtool script, which
+# arranges for $SED and $ECHO to be set by different means.
m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
- case $cc_temp in
- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+[m4_require([_LT_PREPARE_CC_BASENAME])dnl
+AC_REQUIRE([_LT_DECL_SED])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+func_cc_basename $1
+cc_basename=$func_cc_basename_result
])
# _LT_FILEUTILS_DEFAULTS
# ----------------------
# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.
m4_defun([_LT_FILEUTILS_DEFAULTS],
[: ${CP="cp -f"}
: ${MV="mv -f"}
@@ -1076,15 +1159,16 @@ m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
m4_require([_LT_CMD_OLD_ARCHIVE])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
m4_require([_LT_WITH_SYSROOT])dnl
+m4_require([_LT_CMD_TRUNCATE])dnl
_LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
])
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
@@ -1097,7 +1181,7 @@ aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
+ if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -1108,14 +1192,14 @@ esac
ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
# Set sane defaults for various variables
test -z "$CC" && CC=cc
@@ -1168,21 +1252,21 @@ no_glob_subst='s/\*/\\\*/g'
# _LT_PROG_LTMAIN
# ---------------
-# Note that this code is called both from `configure', and `config.status'
+# Note that this code is called both from 'configure', and 'config.status'
# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# 'config.status' has no value for ac_aux_dir unless we are using Automake,
# so we pass a copy along to make sure it has a sensible value anyway.
m4_defun([_LT_PROG_LTMAIN],
[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
])# _LT_PROG_LTMAIN
# So that we can recreate a full libtool script including additional
# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
+# in macros and then make a single call at the end using the 'libtool'
# label.
@@ -1314,8 +1398,8 @@ m4_define([_lt_decl_all_varnames],
# _LT_CONFIG_STATUS_DECLARE([VARNAME])
# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'. VARNAME
+# Quote a variable value, and forward it to 'config.status' so that its
+# declaration there will have the same value as in 'configure'. VARNAME
# must have a single quote delimited value for this to work.
m4_define([_LT_CONFIG_STATUS_DECLARE],
[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
@@ -1339,7 +1423,7 @@ m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
# Output comment and list of tags supported by the script
m4_defun([_LT_LIBTOOL_TAGS],
[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
+available_tags='_LT_TAGS'dnl
])
@@ -1367,7 +1451,7 @@ m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
# _LT_LIBTOOL_CONFIG_VARS
# -----------------------
# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
# section) are produced by _LT_LIBTOOL_TAG_VARS.
m4_defun([_LT_LIBTOOL_CONFIG_VARS],
@@ -1393,8 +1477,8 @@ m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
# variables for single and double quote escaping we saved from calls
# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'. Finally, any additional code accumulated
+# into 'config.status', and then the shell code to quote escape them in
+# for loops in 'config.status'. Finally, any additional code accumulated
# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
m4_defun([_LT_CONFIG_COMMANDS],
[AC_PROVIDE_IFELSE([LT_OUTPUT],
@@ -1440,7 +1524,7 @@ for var in lt_decl_all_varnames([[ \
]], lt_decl_quote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -1453,7 +1537,7 @@ for var in lt_decl_all_varnames([[ \
]], lt_decl_dquote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -1469,7 +1553,7 @@ _LT_OUTPUT_LIBTOOL_INIT
# Generate a child script FILE with all initialization necessary to
# reuse the environment learned by the parent script, and make the
# file executable. If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins. After this
+# '#!' sequence but before initialization text begins. After this
# macro, additional text can be appended to FILE to form the body of
# the child script. The macro ends with non-zero status if the
# file could not be fully written (such as if the disk is full).
@@ -1491,7 +1575,7 @@ AS_SHELL_SANITIZE
_AS_PREPARE
exec AS_MESSAGE_FD>&1
_ASEOF
-test $lt_write_fail = 0 && chmod +x $1[]dnl
+test 0 = "$lt_write_fail" && chmod +x $1[]dnl
m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
# LT_OUTPUT
@@ -1514,7 +1598,7 @@ exec AS_MESSAGE_LOG_FD>>config.log
} >&AS_MESSAGE_LOG_FD
lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
+'$as_me' creates a local libtool stub from the current configuration,
for use in further configure time tests before the real libtool is
generated.
@@ -1536,7 +1620,7 @@ Copyright (C) 2011 Free Software Foundation, Inc.
This config.lt script is free software; the Free Software Foundation
gives unlimited permision to copy, distribute and modify it."
-while test $[#] != 0
+while test 0 != $[#]
do
case $[1] in
--version | --v* | -V )
@@ -1549,10 +1633,10 @@ do
lt_cl_silent=: ;;
-*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
+Try '$[0] --help' for more information.]) ;;
*) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
+Try '$[0] --help' for more information.]) ;;
esac
shift
done
@@ -1578,7 +1662,7 @@ chmod +x "$CONFIG_LT"
# open by configure. Here we exec the FD to /dev/null, effectively closing
# config.log, so it can be properly (re)opened and appended to by config.lt.
lt_cl_success=:
-test "$silent" = yes &&
+test yes = "$silent" &&
lt_config_lt_args="$lt_config_lt_args --quiet"
exec AS_MESSAGE_LOG_FD>/dev/null
$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
@@ -1598,32 +1682,46 @@ m4_defun([_LT_CONFIG],
_LT_CONFIG_SAVE_COMMANDS([
m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
m4_if(_LT_TAG, [C], [
- # See if we are running on zsh, and set the options which allow our
+ # See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
+ if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
- cfgfile="${ofile}T"
+ cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# Generated automatically by $as_me ($PACKAGE) $VERSION
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
_LT_COPYING
_LT_LIBTOOL_TAGS
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
# ### BEGIN LIBTOOL CONFIG
_LT_LIBTOOL_CONFIG_VARS
_LT_LIBTOOL_TAG_VARS
# ### END LIBTOOL CONFIG
+_LT_EOF
+
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_PREPARE_MUNGE_PATH_LIST
+_LT_PREPARE_CC_BASENAME
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
_LT_EOF
case $host_os in
@@ -1632,7 +1730,7 @@ _LT_EOF
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -1649,8 +1747,6 @@ _LT_EOF
sed '$q' "$ltmain" >> "$cfgfile" \
|| (rm -f "$cfgfile"; exit 1)
- _LT_PROG_REPLACE_SHELLFNS
-
mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
@@ -1668,7 +1764,6 @@ _LT_EOF
[m4_if([$1], [], [
PACKAGE='$PACKAGE'
VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
RM='$RM'
ofile='$ofile'], [])
])dnl /_LT_CONFIG_SAVE_COMMANDS
@@ -1865,7 +1960,7 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
[lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
+ if test -z "$LT_MULTI_MODULE"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
@@ -1883,7 +1978,7 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
cat conftest.err >&AS_MESSAGE_LOG_FD
# Otherwise, if the output was created with a 0 exit code from
# the compiler, it worked.
- elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
@@ -1901,7 +1996,7 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
[lt_cv_ld_exported_symbols_list=yes],
[lt_cv_ld_exported_symbols_list=no])
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
])
AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
@@ -1911,8 +2006,8 @@ int forced_loaded() { return 2;}
_LT_EOF
echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
$LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
- echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
- $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+ echo "$AR cr libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+ $AR cr libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
$RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
cat > conftest.c << _LT_EOF
@@ -1923,7 +2018,7 @@ _LT_EOF
_lt_result=$?
if test -s conftest.err && $GREP force_load conftest.err; then
cat conftest.err >&AS_MESSAGE_LOG_FD
- elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
lt_cv_ld_force_load=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
@@ -1933,32 +2028,32 @@ _LT_EOF
])
case $host_os in
rhapsody* | darwin1.[[012]])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
- 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[[012]]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- 10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.0,*86*-darwin8*|10.0,*-darwin[[912]]*)
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]][[,.]]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+ 10.*|11.*)
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
_lt_dar_single_mod='$single_module'
fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
fi
- if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
@@ -1978,29 +2073,29 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- if test "$lt_cv_ld_force_load" = "yes"; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ if test yes = "$lt_cv_ld_force_load"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
[FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=''
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
- if test "$_lt_dar_can_shared" = "yes"; then
+ if test yes = "$_lt_dar_can_shared"; then
output_verbose_link_cmd=func_echo_all
- _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
m4_if([$1], [CXX],
-[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
- _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+[ if test yes != "$lt_cv_apple_cc_single_mod"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
fi
],[])
else
@@ -2020,7 +2115,7 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
# Allow to override them for all tags through lt_cv_aix_libpath.
m4_defun([_LT_SYS_MODULE_PATH_AIX],
[m4_require([_LT_DECL_SED])dnl
-if test "${lt_cv_aix_libpath+set}" = set; then
+if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
@@ -2038,7 +2133,7 @@ else
_LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi],[])
if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
- _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib
fi
])
aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
@@ -2058,8 +2153,8 @@ m4_define([_LT_SHELL_INIT],
# -----------------------
# Find how we can fake an echo command that does not interpret backslash.
# In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
+# of the generated configure script that will find a shell with a builtin
+# printf (that we can use as an echo command).
m4_defun([_LT_PROG_ECHO_BACKSLASH],
[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
@@ -2087,10 +2182,10 @@ fi
# Invoke $ECHO with all args, space-separated.
func_echo_all ()
{
- $ECHO "$*"
+ $ECHO "$*"
}
-case "$ECHO" in
+case $ECHO in
printf*) AC_MSG_RESULT([printf]) ;;
print*) AC_MSG_RESULT([print -r]) ;;
*) AC_MSG_RESULT([cat]) ;;
@@ -2116,16 +2211,17 @@ _LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
AC_DEFUN([_LT_WITH_SYSROOT],
[AC_MSG_CHECKING([for sysroot])
AC_ARG_WITH([sysroot],
-[ --with-sysroot[=DIR] Search for dependent libraries within DIR
- (or the compiler's sysroot if not specified).],
+[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
+ [Search for dependent libraries within DIR (or the compiler's sysroot
+ if not specified).])],
[], [with_sysroot=no])
dnl lt_sysroot will always be passed unquoted. We quote it here
dnl in case the user passed a directory name.
lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
yes)
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_sysroot=`$CC --print-sysroot 2>/dev/null`
fi
;; #(
@@ -2135,14 +2231,14 @@ case ${with_sysroot} in #(
no|'')
;; #(
*)
- AC_MSG_RESULT([${with_sysroot}])
+ AC_MSG_RESULT([$with_sysroot])
AC_MSG_ERROR([The sysroot must be an absolute path.])
;;
esac
AC_MSG_RESULT([${lt_sysroot:-no}])
_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
-[dependent libraries, and in which our libraries should be installed.])])
+[dependent libraries, and where our libraries should be installed.])])
# _LT_ENABLE_LOCK
# ---------------
@@ -2150,31 +2246,33 @@ m4_defun([_LT_ENABLE_LOCK],
[AC_ARG_ENABLE([libtool-lock],
[AS_HELP_STRING([--disable-libtool-lock],
[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
- HPUX_IA64_MODE="32"
+ HPUX_IA64_MODE=32
;;
*ELF-64*)
- HPUX_IA64_MODE="64"
+ HPUX_IA64_MODE=64
;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
@@ -2203,9 +2301,46 @@ ia64-*-hpux*)
rm -rf conftest*
;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
@@ -2215,9 +2350,19 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
LD="${LD-ld} -m elf_i386_fbsd"
;;
x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
+ ;;
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
;;
- ppc64-*linux*|powerpc64-*linux*)
+ powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
@@ -2236,7 +2381,10 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
- ppc*-*linux*|powerpc*-*linux*)
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
@@ -2254,19 +2402,20 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
+ SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_LANG_PUSH(C)
AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
AC_LANG_POP])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ if test yes != "$lt_cv_cc_needs_belf"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+ CFLAGS=$SAVE_CFLAGS
fi
;;
*-*solaris*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
@@ -2274,7 +2423,7 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
case $lt_cv_prog_gnu_ld in
yes*)
case $host in
- i?86-*-solaris*)
+ i?86-*-solaris*|x86_64-*-solaris*)
LD="${LD-ld} -m elf_x86_64"
;;
sparc*-*-solaris*)
@@ -2283,7 +2432,7 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
esac
# GNU ld 2.21 introduced _sol2 emulations. Use them if available.
if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
- LD="${LD-ld}_sol2"
+ LD=${LD-ld}_sol2
fi
;;
*)
@@ -2299,7 +2448,7 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
;;
esac
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
])# _LT_ENABLE_LOCK
@@ -2308,7 +2457,7 @@ need_locks="$enable_libtool_lock"
m4_defun([_LT_PROG_AR],
[AC_CHECK_TOOLS(AR, [ar], false)
: ${AR=ar}
-: ${AR_FLAGS=cru}
+: ${AR_FLAGS=cr}
_LT_DECL([], [AR], [1], [The archiver])
_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
@@ -2318,11 +2467,11 @@ AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
[echo conftest.$ac_objext > conftest.lst
lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
AC_TRY_EVAL([lt_ar_try])
- if test "$ac_status" -eq 0; then
+ if test 0 -eq "$ac_status"; then
# Ensure the archiver fails upon bogus file names.
rm -f conftest.$ac_objext libconftest.a
AC_TRY_EVAL([lt_ar_try])
- if test "$ac_status" -ne 0; then
+ if test 0 -ne "$ac_status"; then
lt_cv_ar_at_file=@
fi
fi
@@ -2330,7 +2479,7 @@ AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
])
])
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
archiver_list_spec=
else
archiver_list_spec=$lt_cv_ar_at_file
@@ -2361,7 +2510,7 @@ old_postuninstall_cmds=
if test -n "$RANLIB"; then
case $host_os in
- openbsd*)
+ bitrig* | openbsd*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
@@ -2397,7 +2546,7 @@ AC_CACHE_CHECK([$1], [$2],
[$2=no
m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$3"
+ lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
@@ -2424,7 +2573,7 @@ AC_CACHE_CHECK([$1], [$2],
$RM conftest*
])
-if test x"[$]$2" = xyes; then
+if test yes = "[$]$2"; then
m4_if([$5], , :, [$5])
else
m4_if([$6], , :, [$6])
@@ -2446,7 +2595,7 @@ AC_DEFUN([_LT_LINKER_OPTION],
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $3"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -2465,10 +2614,10 @@ AC_CACHE_CHECK([$1], [$2],
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
])
-if test x"[$]$2" = xyes; then
+if test yes = "[$]$2"; then
m4_if([$4], , :, [$4])
else
m4_if([$5], , :, [$5])
@@ -2489,7 +2638,7 @@ AC_DEFUN([LT_CMD_MAX_LEN],
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
- teststring="ABCD"
+ teststring=ABCD
case $build_os in
msdosdjgpp*)
@@ -2529,7 +2678,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
lt_cv_sys_max_cmd_len=8192;
;;
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -2579,22 +2728,23 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
;;
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
+ if test -n "$lt_cv_sys_max_cmd_len" && \
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
+ for i in 1 2 3 4 5 6 7 8; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
= "X$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
+ test 17 != "$i" # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
@@ -2610,7 +2760,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
;;
esac
])
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
else
AC_MSG_RESULT(none)
@@ -2638,7 +2788,7 @@ m4_defun([_LT_HEADER_DLFCN],
# ----------------------------------------------------------------
m4_defun([_LT_TRY_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
+if test yes = "$cross_compiling"; then :
[$4]
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -2685,9 +2835,9 @@ else
# endif
#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
@@ -2713,7 +2863,7 @@ int main ()
return status;
}]
_LT_EOF
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+ if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
lt_status=$?
case x$lt_status in
@@ -2734,7 +2884,7 @@ rm -fr conftest*
# ------------------
AC_DEFUN([LT_SYS_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
+if test yes != "$enable_dlopen"; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
@@ -2744,44 +2894,52 @@ else
case $host_os in
beos*)
- lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen=load_add_on
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen=LoadLibrary
lt_cv_dlopen_libs=
;;
cygwin*)
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
;;
darwin*)
- # if libdl is installed we need to link against it
+ # if libdl is installed we need to link against it
AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
- lt_cv_dlopen="dyld"
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[
+ lt_cv_dlopen=dyld
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
])
;;
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
*)
AC_CHECK_FUNC([shl_load],
- [lt_cv_dlopen="shl_load"],
+ [lt_cv_dlopen=shl_load],
[AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+ [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld],
[AC_CHECK_FUNC([dlopen],
- [lt_cv_dlopen="dlopen"],
+ [lt_cv_dlopen=dlopen],
[AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],
[AC_CHECK_LIB([svld], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld],
[AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+ [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld])
])
])
])
@@ -2790,21 +2948,21 @@ else
;;
esac
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
+ if test no = "$lt_cv_dlopen"; then
enable_dlopen=no
+ else
+ enable_dlopen=yes
fi
case $lt_cv_dlopen in
dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- save_LIBS="$LIBS"
+ save_LIBS=$LIBS
LIBS="$lt_cv_dlopen_libs $LIBS"
AC_CACHE_CHECK([whether a program can dlopen itself],
@@ -2814,7 +2972,7 @@ else
lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
])
- if test "x$lt_cv_dlopen_self" = xyes; then
+ if test yes = "$lt_cv_dlopen_self"; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
lt_cv_dlopen_self_static, [dnl
@@ -2824,9 +2982,9 @@ else
])
fi
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
;;
esac
@@ -2918,8 +3076,8 @@ m4_defun([_LT_COMPILER_FILE_LOCKS],
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_COMPILER_C_O([$1])
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
AC_MSG_CHECKING([if we can lock with hard links])
hard_links=yes
@@ -2929,8 +3087,8 @@ if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" !=
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
AC_MSG_RESULT([$hard_links])
- if test "$hard_links" = no; then
- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+ if test no = "$hard_links"; then
+ AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe])
need_locks=warn
fi
else
@@ -2957,8 +3115,8 @@ objdir=$lt_cv_objdir
_LT_DECL([], [objdir], [0],
[The name of the directory that contains temporary libtool files])dnl
m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
- [Define to the sub-directory in which libtool stores uninstalled libraries.])
+AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/",
+ [Define to the sub-directory where libtool stores uninstalled libraries.])
])# _LT_CHECK_OBJDIR
@@ -2970,15 +3128,15 @@ m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
_LT_TAGVAR(hardcode_action, $1)=
if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
test -n "$_LT_TAGVAR(runpath_var, $1)" ||
- test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+ test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then
# We can hardcode non-existent directories.
- if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+ if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
+ test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
# Linking always hardcodes the temporary library directory.
_LT_TAGVAR(hardcode_action, $1)=relink
else
@@ -2992,12 +3150,12 @@ else
fi
AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
- test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
+ test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
# Fast installation is not supported
enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
@@ -3021,7 +3179,7 @@ else
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
- if test -n "$STRIP" ; then
+ if test -n "$STRIP"; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
AC_MSG_RESULT([yes])
@@ -3039,6 +3197,47 @@ _LT_DECL([], [striplib], [1])
])# _LT_CMD_STRIPLIB
+# _LT_PREPARE_MUNGE_PATH_LIST
+# ---------------------------
+# Make sure func_munge_path_list() is defined correctly.
+m4_defun([_LT_PREPARE_MUNGE_PATH_LIST],
+[[# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x@S|@2 in
+ x)
+ ;;
+ *:)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
+ ;;
+ x:*)
+ eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
+ ;;
+ *)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+]])# _LT_PREPARE_PATH_LIST
+
+
# _LT_SYS_DYNAMIC_LINKER([TAG])
# -----------------------------
# PORTME Fill in your ld.so characteristics
@@ -3049,17 +3248,18 @@ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_OBJDUMP])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl
AC_MSG_CHECKING([dynamic linker characteristics])
m4_if([$1],
[], [
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
esac
case $host_os in
- mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
- *) lt_sed_strip_eq="s,=/,/,g" ;;
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
esac
lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
case $lt_search_path_spec in
@@ -3075,28 +3275,35 @@ if test "$GCC" = yes; then
;;
esac
# Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
+ # and add multilib dir if necessary...
lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
lt_count++;
} else {
if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
+ lt_foo = "/" $lt_i lt_foo;
} else {
lt_count--;
}
@@ -3110,7 +3317,7 @@ BEGIN {RS=" "; FS="/|\n";} {
# for these hosts.
case $host_os in
mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
- $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+ $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;;
esac
sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
@@ -3119,7 +3326,7 @@ fi])
library_names_spec=
libname_spec='lib$name'
soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
@@ -3136,14 +3343,17 @@ hardcode_into_libs=no
# flags to be left without arguments
need_version=unknown
+AC_ARG_VAR([LT_SYS_LIBRARY_PATH],
+[User-defined run-time library search path.])
+
case $host_os in
aix3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
+ soname_spec='$libname$release$shared_ext$major'
;;
aix[[4-9]]*)
@@ -3151,41 +3361,91 @@ aix[[4-9]]*)
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[[01]] | aix4.[[01]].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a[(]lib.so.V[)]'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
shlibpath_var=LIBPATH
fi
;;
@@ -3195,18 +3455,18 @@ amigaos*)
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
- library_names_spec='${libname}${shared_ext}'
+ library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
@@ -3214,8 +3474,8 @@ beos*)
bsdi[[45]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -3227,7 +3487,7 @@ bsdi[[45]]*)
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
- shrext_cmds=".dll"
+ shrext_cmds=.dll
need_version=no
need_lib_prefix=no
@@ -3236,8 +3496,8 @@ cygwin* | mingw* | pw32* | cegcc*)
# gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
@@ -3253,17 +3513,17 @@ cygwin* | mingw* | pw32* | cegcc*)
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
m4_if([$1], [],[
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
esac
dynamic_linker='Win32 ld.exe'
@@ -3272,8 +3532,8 @@ m4_if([$1], [],[
*,cl*)
# Native MSVC
libname_spec='$name'
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- library_names_spec='${libname}.dll.lib'
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
case $build_os in
mingw*)
@@ -3300,7 +3560,7 @@ m4_if([$1], [],[
sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
;;
*)
- sys_lib_search_path_spec="$LIB"
+ sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
# It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -3313,8 +3573,8 @@ m4_if([$1], [],[
esac
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
@@ -3327,7 +3587,7 @@ m4_if([$1], [],[
*)
# Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
dynamic_linker='Win32 ld.exe'
;;
esac
@@ -3340,8 +3600,8 @@ darwin* | rhapsody*)
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -3354,8 +3614,8 @@ dgux*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -3373,12 +3633,13 @@ freebsd* | dragonfly*)
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
@@ -3403,26 +3664,15 @@ freebsd* | dragonfly*)
esac
;;
-gnu*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
@@ -3440,14 +3690,15 @@ hpux9* | hpux10* | hpux11*)
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
@@ -3455,8 +3706,8 @@ hpux9* | hpux10* | hpux11*)
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
@@ -3465,8 +3716,8 @@ hpux9* | hpux10* | hpux11*)
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -3479,8 +3730,8 @@ interix[[3-9]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -3491,7 +3742,7 @@ irix5* | irix6* | nonstopux*)
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
@@ -3499,8 +3750,8 @@ irix5* | irix6* | nonstopux*)
esac
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
@@ -3519,8 +3770,8 @@ irix5* | irix6* | nonstopux*)
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
@@ -3529,13 +3780,33 @@ linux*oldld* | linux*aout* | linux*coff*)
dynamic_linker=no
;;
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ ;;
+
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -3560,14 +3831,15 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
# before this can be enabled.
hardcode_into_libs=yes
- # Add ABI-specific directories to the system library path.
- sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
-
- # Append ld.so.conf contents to the search path
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -3579,17 +3851,29 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
dynamic_linker='GNU/Linux ld.so'
;;
+netbsdelf*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
+
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
@@ -3599,7 +3883,7 @@ netbsd*)
newsos6)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
@@ -3608,58 +3892,68 @@ newsos6)
version_type=qnx
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='ldqnx.so'
;;
-openbsd*)
+openbsd* | bitrig*)
version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[[89]] | openbsd2.[[89]].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
else
- shlibpath_overrides_runpath=yes
+ need_version=yes
fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
- shrext_cmds=".dll"
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
@@ -3670,8 +3964,8 @@ solaris*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
@@ -3681,11 +3975,11 @@ solaris*)
sunos4*)
version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
@@ -3693,8 +3987,8 @@ sunos4*)
sysv4 | sysv4.3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
@@ -3715,24 +4009,24 @@ sysv4 | sysv4.3*)
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
+ version_type=sco
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -3750,7 +4044,7 @@ tpf*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
@@ -3758,8 +4052,8 @@ tpf*)
uts4*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -3768,20 +4062,30 @@ uts4*)
;;
esac
AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
_LT_DECL([], [variables_saved_for_relink], [1],
[Variables whose values should be saved in libtool wrapper scripts and
restored at link time])
@@ -3814,39 +4118,41 @@ _LT_DECL([], [hardcode_into_libs], [0],
[Whether we should hardcode library paths into libraries])
_LT_DECL([], [sys_lib_search_path_spec], [2],
[Compile-time system search path for libraries])
-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
- [Run-time system search path for libraries])
+_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2],
+ [Detected run-time system search path for libraries])
+_LT_DECL([], [configure_time_lt_sys_library_path], [2],
+ [Explicit LT_SYS_LIBRARY_PATH set during ./configure time])
])# _LT_SYS_DYNAMIC_LINKER
# _LT_PATH_TOOL_PREFIX(TOOL)
# --------------------------
-# find a file program which can recognize shared library
+# find a file program that can recognize shared library
AC_DEFUN([_LT_PATH_TOOL_PREFIX],
[m4_require([_LT_DECL_EGREP])dnl
AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
[[\\/*] | ?:[\\/]*])
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word. This closes a longstanding sh security hole.
ac_dummy="m4_if([$2], , $PATH, [$2])"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -f "$ac_dir/$1"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
@@ -3869,11 +4175,11 @@ _LT_EOF
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
AC_MSG_RESULT($MAGIC_CMD)
else
@@ -3891,7 +4197,7 @@ dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
# _LT_PATH_MAGIC
# --------------
-# find a file program which can recognize a shared library
+# find a file program that can recognize a shared library
m4_defun([_LT_PATH_MAGIC],
[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
@@ -3918,16 +4224,16 @@ m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
AC_ARG_WITH([gnu-ld],
[AS_HELP_STRING([--with-gnu-ld],
[assume the C compiler uses GNU ld @<:@default=no@:>@])],
- [test "$withval" = no || with_gnu_ld=yes],
+ [test no = "$withval" || with_gnu_ld=yes],
[with_gnu_ld=no])dnl
ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by $CC])
case $host in
*-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
+ # gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -3941,7 +4247,7 @@ if test "$GCC" = yes; then
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
- test -z "$LD" && LD="$ac_prog"
+ test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
@@ -3952,37 +4258,37 @@ if test "$GCC" = yes; then
with_gnu_ld=unknown
;;
esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(lt_cv_path_LD,
[if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
+ test no != "$with_gnu_ld" && break
;;
*)
- test "$with_gnu_ld" != yes && break
+ test yes != "$with_gnu_ld" && break
;;
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
fi])
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
@@ -4036,13 +4342,13 @@ esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
reload_cmds=false
fi
;;
darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ if test yes = "$GCC"; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
@@ -4053,6 +4359,43 @@ _LT_TAGDECL([], [reload_cmds], [2])dnl
])# _LT_CMD_RELOAD
+# _LT_PATH_DD
+# -----------
+# find a working dd
+m4_defun([_LT_PATH_DD],
+[AC_CACHE_CHECK([for a working dd], [ac_cv_path_lt_DD],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd],
+[if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi])
+rm -f conftest.i conftest2.i conftest.out])
+])# _LT_PATH_DD
+
+
+# _LT_CMD_TRUNCATE
+# ----------------
+# find command to truncate a binary pipe
+m4_defun([_LT_CMD_TRUNCATE],
+[m4_require([_LT_PATH_DD])
+AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"])
+_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1],
+ [Command to truncate a binary pipe])
+])# _LT_CMD_TRUNCATE
+
+
# _LT_CHECK_MAGIC_METHOD
# ----------------------
# how to check for library dependencies
@@ -4068,13 +4411,13 @@ lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
case $host_os in
aix[[4-9]]*)
@@ -4101,8 +4444,7 @@ mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
- if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ if ( file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
@@ -4138,10 +4480,6 @@ freebsd* | dragonfly*)
fi
;;
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
haiku*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -4180,11 +4518,11 @@ irix5* | irix6* | nonstopux*)
;;
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
lt_cv_deplibs_check_method=pass_all
;;
-netbsd*)
+netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
@@ -4202,8 +4540,8 @@ newos6*)
lt_cv_deplibs_check_method=pass_all
;;
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
@@ -4256,6 +4594,9 @@ sysv4 | sysv4.3*)
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
])
@@ -4296,33 +4637,38 @@ AC_DEFUN([LT_PATH_NM],
AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
- lt_cv_path_NM="$NM"
+ lt_cv_path_NM=$NM
else
- lt_nm_to_check="${ac_tool_prefix}nm"
+ lt_nm_to_check=${ac_tool_prefix}nm
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
# Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
- break
+ break 2
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
- break
+ break 2
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
@@ -4333,21 +4679,21 @@ else
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
done
: ${lt_cv_path_NM=no}
fi])
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
else
# Didn't find any BSD compatible name lister, look for dumpbin.
if test -n "$DUMPBIN"; then :
# Let the user override the test.
else
AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
- case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
*COFF*)
- DUMPBIN="$DUMPBIN -symbols"
+ DUMPBIN="$DUMPBIN -symbols -headers"
;;
*)
DUMPBIN=:
@@ -4355,8 +4701,8 @@ else
esac
fi
AC_SUBST([DUMPBIN])
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
fi
fi
test -z "$NM" && NM=nm
@@ -4402,8 +4748,8 @@ lt_cv_sharedlib_from_linklib_cmd,
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- # two different shell functions defined in ltmain.sh
- # decide which to use based on capabilities of $DLLTOOL
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
case `$DLLTOOL --help 2>&1` in
*--identify-strict*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
@@ -4415,7 +4761,7 @@ cygwin* | mingw* | pw32* | cegcc*)
;;
*)
# fallback: assume linklib IS sharedlib
- lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
;;
esac
])
@@ -4442,13 +4788,28 @@ AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool
lt_cv_path_mainfest_tool=yes
fi
rm -f conftest*])
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
MANIFEST_TOOL=:
fi
_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
])# _LT_PATH_MANIFEST_TOOL
+# _LT_DLL_DEF_P([FILE])
+# ---------------------
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with func_dll_def_p in the libtool script
+AC_DEFUN([_LT_DLL_DEF_P],
+[dnl
+ test DEF = "`$SED -n dnl
+ -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace
+ -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments
+ -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl
+ -e q dnl Only consider the first "real" line
+ $1`" dnl
+])# _LT_DLL_DEF_P
+
+
# LT_LIB_M
# --------
# check for math library
@@ -4460,11 +4821,11 @@ case $host in
# These system don't have libm, or don't need it
;;
*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
;;
*)
- AC_CHECK_LIB(m, cos, LIBM="-lm")
+ AC_CHECK_LIB(m, cos, LIBM=-lm)
;;
esac
AC_SUBST([LIBM])
@@ -4483,7 +4844,7 @@ m4_defun([_LT_COMPILER_NO_RTTI],
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $cc_basename in
nvcc*)
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
@@ -4535,7 +4896,7 @@ cygwin* | mingw* | pw32* | cegcc*)
symcode='[[ABCDGISTW]]'
;;
hpux*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
symcode='[[ABCDEGRST]]'
fi
;;
@@ -4568,14 +4929,44 @@ case `$NM -V 2>&1` in
symcode='[[ABCDGIRSTW]]' ;;
esac
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
@@ -4593,21 +4984,24 @@ for ac_symprfx in "" "_"; do
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
# Also find C++ and __fastcall symbols from MSVC++,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK ['"\
" {last_section=section; section=\$ 3};"\
" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx]"
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
@@ -4634,7 +5028,8 @@ _LT_EOF
if AC_TRY_EVAL(ac_compile); then
# Now try to grab the symbols.
nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+ $ECHO "$as_me:$LINENO: $NM conftest.$ac_objext | $lt_cv_sys_global_symbol_pipe > $nlist" >&AS_MESSAGE_LOG_FD
+ if eval "$NM" conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist 2>&AS_MESSAGE_LOG_FD && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
mv -f "$nlist"T "$nlist"
@@ -4647,11 +5042,11 @@ _LT_EOF
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT@&t@_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT@&t@_DLSYM_CONST
#else
@@ -4677,7 +5072,7 @@ lt__PROGRAM__LTX_preloaded_symbols[[]] =
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
@@ -4697,9 +5092,9 @@ _LT_EOF
mv conftest.$ac_objext conftstm.$ac_objext
lt_globsym_save_LIBS=$LIBS
lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
+ LIBS=conftstm.$ac_objext
CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
pipe_works=yes
fi
LIBS=$lt_globsym_save_LIBS
@@ -4720,7 +5115,7 @@ _LT_EOF
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
+ if test yes = "$pipe_works"; then
break
else
lt_cv_sys_global_symbol_pipe=
@@ -4747,12 +5142,16 @@ _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
[Take the output of nm and produce a listing of raw symbols and C names])
_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
[Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1],
+ [Transform the output of nm into a list of symbols to manually relocate])
_LT_DECL([global_symbol_to_c_name_address],
[lt_cv_sys_global_symbol_to_c_name_address], [1],
[Transform the output of nm in a C name address pair])
_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
[lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
[Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([nm_interface], [lt_cv_nm_interface], [1],
+ [The name lister interface])
_LT_DECL([], [nm_file_list_spec], [1],
[Specify filename containing input files for $NM])
]) # _LT_CMD_GLOBAL_SYMBOLS
@@ -4768,17 +5167,18 @@ _LT_TAGVAR(lt_prog_compiler_static, $1)=
m4_if([$1], [CXX], [
# C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
@@ -4789,8 +5189,8 @@ m4_if([$1], [CXX], [
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
@@ -4806,6 +5206,11 @@ m4_if([$1], [CXX], [
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
# PIC is the default on this platform
@@ -4855,7 +5260,7 @@ m4_if([$1], [CXX], [
case $host_os in
aix[[4-9]]*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
@@ -4896,14 +5301,14 @@ m4_if([$1], [CXX], [
case $cc_basename in
CC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+ if test ia64 != "$host_cpu"; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
fi
;;
aCC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
@@ -4932,7 +5337,7 @@ m4_if([$1], [CXX], [
;;
esac
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# KAI C++ Compiler
@@ -4940,7 +5345,7 @@ m4_if([$1], [CXX], [
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
ecpc* )
- # old Intel C++ for x86_64 which still supported -KPIC.
+ # old Intel C++ for x86_64, which still supported -KPIC.
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
@@ -4996,7 +5401,7 @@ m4_if([$1], [CXX], [
;;
esac
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
;;
*qnx* | *nto*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
@@ -5085,17 +5490,18 @@ m4_if([$1], [CXX], [
fi
],
[
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
@@ -5106,8 +5512,8 @@ m4_if([$1], [CXX], [
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
@@ -5124,6 +5530,11 @@ m4_if([$1], [CXX], [
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
@@ -5194,7 +5605,7 @@ m4_if([$1], [CXX], [
case $host_os in
aix*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
@@ -5202,11 +5613,30 @@ m4_if([$1], [CXX], [
fi
;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
hpux9* | hpux10* | hpux11*)
@@ -5222,7 +5652,7 @@ m4_if([$1], [CXX], [
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
@@ -5231,16 +5661,22 @@ m4_if([$1], [CXX], [
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
+ # old Intel for x86_64, which still supported -KPIC.
ecc*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
- # icc used to be incompatible with GCC.
- # ICC 10 doesn't accept -KPIC any more.
+ # flang / f18. f95 an alias for gfortran or flang on Debian
+ flang* | f18* | f95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
icc* | ifort*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
@@ -5258,6 +5694,12 @@ m4_if([$1], [CXX], [
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
@@ -5355,7 +5797,7 @@ m4_if([$1], [CXX], [
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
@@ -5384,7 +5826,7 @@ m4_if([$1], [CXX], [
fi
])
case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
+ # For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
@@ -5450,17 +5892,21 @@ m4_if([$1], [CXX], [
case $host_os in
aix[[4-9]]*)
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global defined
- # symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
- _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+ _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
;;
cygwin* | mingw* | cegcc*)
case $cc_basename in
@@ -5473,6 +5919,9 @@ m4_if([$1], [CXX], [
;;
esac
;;
+ linux* | k*bsd*-gnu | gnu*)
+ _LT_TAGVAR(link_all_deplibs, $1)=no
+ ;;
*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
@@ -5506,9 +5955,9 @@ m4_if([$1], [CXX], [
# included in the symbol list
_LT_TAGVAR(include_expsyms, $1)=
# exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
_LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
@@ -5524,7 +5973,7 @@ dnl Note also adjust exclude_expsyms for C++ above.
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
with_gnu_ld=no
fi
;;
@@ -5532,9 +5981,12 @@ dnl Note also adjust exclude_expsyms for C++ above.
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
- openbsd*)
+ openbsd* | bitrig*)
with_gnu_ld=no
;;
+ linux* | k*bsd*-gnu | gnu*)
+ _LT_TAGVAR(link_all_deplibs, $1)=no
+ ;;
esac
_LT_TAGVAR(ld_shlibs, $1)=yes
@@ -5542,7 +5994,7 @@ dnl Note also adjust exclude_expsyms for C++ above.
# On some targets, GNU ld is compatible enough with the native linker
# that we're better off using the native interface for both.
lt_use_gnu_ld_interface=no
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
case $host_os in
aix*)
# The AIX port of GNU ld has always aspired to compatibility
@@ -5564,24 +6016,24 @@ dnl Note also adjust exclude_expsyms for C++ above.
esac
fi
- if test "$lt_use_gnu_ld_interface" = yes; then
+ if test yes = "$lt_use_gnu_ld_interface"; then
# If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
+ wlarc='$wl'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
supports_anon_versioning=no
- case `$LD -v 2>&1` in
+ case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
*GNU\ gold*) supports_anon_versioning=yes ;;
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -5594,7 +6046,7 @@ dnl Note also adjust exclude_expsyms for C++ above.
case $host_os in
aix[[3-9]]*)
# On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
+ if test ia64 != "$host_cpu"; then
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
@@ -5613,7 +6065,7 @@ _LT_EOF
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
@@ -5629,7 +6081,7 @@ _LT_EOF
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -5639,7 +6091,7 @@ _LT_EOF
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
@@ -5647,61 +6099,89 @@ _LT_EOF
_LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
haiku*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
+ if test linux-dietlibc = "$host_os"; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
+ && test no = "$tmp_diet"
then
tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group f77 and f90 compilers
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
@@ -5712,42 +6192,47 @@ _LT_EOF
lf95*) # Lahey Fortran 8.1
_LT_TAGVAR(whole_archive_flag_spec, $1)=
tmp_sharedflag='--shared' ;;
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
nvcc*) # Cuda Compiler Driver 2.2
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
- _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
+ tcc*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
+ ;;
xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
_LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
@@ -5756,13 +6241,13 @@ _LT_EOF
fi
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
@@ -5780,8 +6265,8 @@ _LT_EOF
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -5793,7 +6278,7 @@ _LT_EOF
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
@@ -5808,9 +6293,9 @@ _LT_EOF
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -5827,15 +6312,15 @@ _LT_EOF
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
- if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+ if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
runpath_var=
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
@@ -5851,7 +6336,7 @@ _LT_EOF
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
_LT_TAGVAR(hardcode_direct, $1)=unsupported
@@ -5859,34 +6344,57 @@ _LT_EOF
;;
aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global
- # defined symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
aix_use_runtimelinking=yes
break
fi
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
@@ -5905,13 +6413,21 @@ _LT_EOF
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
@@ -5930,61 +6446,80 @@ _LT_EOF
;;
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
_LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
@@ -5993,7 +6528,7 @@ _LT_EOF
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
@@ -6023,16 +6558,17 @@ _LT_EOF
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
@@ -6041,18 +6577,18 @@ _LT_EOF
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# Assume MSVC wrapper
@@ -6061,7 +6597,7 @@ _LT_EOF
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
@@ -6111,33 +6647,33 @@ _LT_EOF
;;
hpux9*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
@@ -6145,25 +6681,25 @@ _LT_EOF
;;
hpux11*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ if test yes,no = "$GCC,$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
m4_if($1, [], [
@@ -6171,14 +6707,14 @@ _LT_EOF
# (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
_LT_LINKER_OPTION([if $CC understands -b],
_LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
- [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
[_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
- [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
;;
esac
fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
@@ -6189,7 +6725,7 @@ _LT_EOF
*)
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
@@ -6200,16 +6736,16 @@ _LT_EOF
;;
irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
# This should be the same for all languages, so no per-tag cache variable.
AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
[lt_cv_irix_exported_symbol],
- [save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ [save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
AC_LINK_IFELSE(
[AC_LANG_SOURCE(
[AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
@@ -6222,22 +6758,33 @@ _LT_EOF
end]])])],
[lt_cv_irix_exported_symbol=yes],
[lt_cv_irix_exported_symbol=no])
- LDFLAGS="$save_LDFLAGS"])
- if test "$lt_cv_irix_exported_symbol" = yes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ LDFLAGS=$save_LDFLAGS])
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
fi
+ _LT_TAGVAR(link_all_deplibs, $1)=no
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
- netbsd*)
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
@@ -6251,7 +6798,7 @@ _LT_EOF
newsos6)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
@@ -6259,27 +6806,19 @@ _LT_EOF
*nto* | *qnx*)
;;
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
fi
else
_LT_TAGVAR(ld_shlibs, $1)=no
@@ -6290,33 +6829,53 @@ _LT_EOF
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
osf3*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -6327,24 +6886,24 @@ _LT_EOF
solaris*)
_LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
- _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
@@ -6354,11 +6913,11 @@ _LT_EOF
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
fi
@@ -6368,10 +6927,10 @@ _LT_EOF
;;
sunos4*)
- if test "x$host_vendor" = xsequent; then
+ if test sequent = "$host_vendor"; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
@@ -6420,43 +6979,43 @@ _LT_EOF
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
@@ -6471,17 +7030,17 @@ _LT_EOF
;;
esac
- if test x$host_vendor = xsni; then
+ if test sni = "$host_vendor"; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
;;
esac
fi
fi
])
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
@@ -6498,7 +7057,7 @@ x|xyes)
# Assume -lc should be added
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- if test "$enable_shared" = yes && test "$GCC" = yes; then
+ if test yes,yes = "$GCC,$enable_shared"; then
case $_LT_TAGVAR(archive_cmds, $1) in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
@@ -6578,12 +7137,12 @@ _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
_LT_TAGDECL([], [hardcode_libdir_separator], [1],
[Whether we need a single "-rpath" flag with a separated argument])
_LT_TAGDECL([], [hardcode_direct], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary])
_LT_TAGDECL([], [hardcode_direct_absolute], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary and the resulting library dependency is
- "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ "absolute", i.e impossible to change by setting $shlibpath_var if the
library is relocated])
_LT_TAGDECL([], [hardcode_minus_L], [0],
[Set to "yes" if using the -LDIR flag during linking hardcodes DIR
@@ -6624,10 +7183,10 @@ dnl [Compiler flag to generate thread safe objects])
# ------------------------
# Ensure that the configuration variables for a C compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_C_CONFIG],
[m4_require([_LT_DECL_EGREP])dnl
-lt_save_CC="$CC"
+lt_save_CC=$CC
AC_LANG_PUSH(C)
# Source file extension for C test sources.
@@ -6663,18 +7222,18 @@ if test -n "$compiler"; then
LT_SYS_DLOPEN_SELF
_LT_CMD_STRIPLIB
- # Report which library types will actually be built
+ # Report what library types will actually be built
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
@@ -6682,8 +7241,12 @@ if test -n "$compiler"; then
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -6691,13 +7254,13 @@ if test -n "$compiler"; then
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_CONFIG($1)
fi
AC_LANG_POP
-CC="$lt_save_CC"
+CC=$lt_save_CC
])# _LT_LANG_C_CONFIG
@@ -6705,14 +7268,14 @@ CC="$lt_save_CC"
# --------------------------
# Ensure that the configuration variables for a C++ compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_CXX_CONFIG],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_PATH_MANIFEST_TOOL])dnl
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
+if test -n "$CXX" && ( test no != "$CXX" &&
+ ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+ (test g++ != "$CXX"))); then
AC_PROG_CXXCPP
else
_lt_caught_CXX_error=yes
@@ -6754,7 +7317,7 @@ _LT_TAGVAR(objext, $1)=$objext
# the CXX compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
+if test yes != "$_lt_caught_CXX_error"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
@@ -6796,35 +7359,35 @@ if test "$_lt_caught_CXX_error" != yes; then
if test -n "$compiler"; then
# We don't want -fno-exception when compiling C++ code, so set the
# no_builtin_flag separately
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
else
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
fi
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
# Set up default GNU C++ configuration
LT_PATH_LD
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ if test yes = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# If archive_cmds runs LD, not CC, wlarc should be empty
# XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
# investigate it a little bit more. (MM)
- wlarc='${wl}'
+ wlarc='$wl'
# ancient GNU ld didn't support --whole-archive et. al.
if eval "`$CC -print-prog-name=ld` --help 2>&1" |
$GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
@@ -6843,7 +7406,7 @@ if test "$_lt_caught_CXX_error" != yes; then
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
else
GXX=no
@@ -6860,18 +7423,30 @@ if test "$_lt_caught_CXX_error" != yes; then
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
case $ld_flag in
@@ -6881,6 +7456,13 @@ if test "$_lt_caught_CXX_error" != yes; then
;;
esac
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
@@ -6899,13 +7481,21 @@ if test "$_lt_caught_CXX_error" != yes; then
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
@@ -6923,64 +7513,84 @@ if test "$_lt_caught_CXX_error" != yes; then
fi
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag=$shared_flag' $wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to
# export.
_LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # The "-G" linker flag allows undefined symbols.
+ _LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
# Determine the default libpath from the value encoded in an empty
# executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared
- # libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared
+ # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
@@ -6990,7 +7600,7 @@ if test "$_lt_caught_CXX_error" != yes; then
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -7018,57 +7628,58 @@ if test "$_lt_caught_CXX_error" != yes; then
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- func_to_tool_file "$lt_outputfile"~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# g++
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -7079,6 +7690,34 @@ if test "$_lt_caught_CXX_error" != yes; then
_LT_DARWIN_LINKER_FEATURES($1)
;;
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
dgux*)
case $cc_basename in
ec++*)
@@ -7113,18 +7752,15 @@ if test "$_lt_caught_CXX_error" != yes; then
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
- gnu*)
- ;;
-
haiku*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
hpux9*)
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
# but as the default
@@ -7136,7 +7772,7 @@ if test "$_lt_caught_CXX_error" != yes; then
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
@@ -7145,11 +7781,11 @@ if test "$_lt_caught_CXX_error" != yes; then
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP " \-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GXX"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
@@ -7159,15 +7795,15 @@ if test "$_lt_caught_CXX_error" != yes; then
;;
hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
hppa*64*|ia64*)
;;
*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
esac
fi
@@ -7193,13 +7829,13 @@ if test "$_lt_caught_CXX_error" != yes; then
aCC*)
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
# Commands to make compiler produce verbose output that lists
@@ -7210,20 +7846,20 @@ if test "$_lt_caught_CXX_error" != yes; then
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP " \-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
fi
@@ -7238,22 +7874,22 @@ if test "$_lt_caught_CXX_error" != yes; then
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
irix5* | irix6*)
case $cc_basename in
CC*)
# SGI C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
@@ -7262,22 +7898,22 @@ if test "$_lt_caught_CXX_error" != yes; then
_LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
;;
*)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
fi
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -7285,8 +7921,8 @@ if test "$_lt_caught_CXX_error" != yes; then
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
@@ -7295,10 +7931,10 @@ if test "$_lt_caught_CXX_error" != yes; then
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# Archives containing C++ object files must be created using
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
@@ -7312,59 +7948,59 @@ if test "$_lt_caught_CXX_error" != yes; then
# earlier do not add the objects themselves.
case `$CC -V 2>&1` in
*"Version 7."*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 8.0 or newer
tmp_idyn=
case $host_cpu in
ia64*) tmp_idyn=' -i_dynamic';;
esac
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
;;
pgCC* | pgcpp*)
# Portland Group C++ compiler
case `$CC -V` in
*pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
_LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
- compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
_LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
- $RANLIB $oldlib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
_LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 6 and above use weak symbols
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
;;
cxx*)
# Compaq C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols'
runpath_var=LD_RUN_PATH
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -7378,18 +8014,18 @@ if test "$_lt_caught_CXX_error" != yes; then
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
;;
xl* | mpixl* | bgxl*)
# IBM XL 8.0 on PPC, with GNU ld
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
;;
*)
@@ -7397,10 +8033,10 @@ if test "$_lt_caught_CXX_error" != yes; then
*Sun\ C*)
# Sun C++ 5.9
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
# Not sure whether something based on
@@ -7458,22 +8094,17 @@ if test "$_lt_caught_CXX_error" != yes; then
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
fi
output_verbose_link_cmd=func_echo_all
else
@@ -7489,9 +8120,9 @@ if test "$_lt_caught_CXX_error" != yes; then
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Archives containing C++ object files must be created using
@@ -7509,17 +8140,17 @@ if test "$_lt_caught_CXX_error" != yes; then
cxx*)
case $host in
osf3*)
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
;;
*)
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
- $RM $lib.exp'
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+ $RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
;;
esac
@@ -7534,27 +8165,27 @@ if test "$_lt_caught_CXX_error" != yes; then
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
case $host in
osf3*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
else
# FIXME: insert proper C++ library support
@@ -7594,9 +8225,9 @@ if test "$_lt_caught_CXX_error" != yes; then
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(archive_cmds_need_lc,$1)=yes
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -7604,7 +8235,7 @@ if test "$_lt_caught_CXX_error" != yes; then
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
+ # but understands '-z linker_flag'.
# Supported since Solaris 2.6 (maybe 2.5.1?)
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
;;
@@ -7621,42 +8252,42 @@ if test "$_lt_caught_CXX_error" != yes; then
;;
gcx*)
# Green Hills C++ Compiler
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
# The C++ compiler must be used to create the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
;;
*)
# GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
if $CC --version | $GREP -v '^2\.7' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # g++ 2.7 appears to require '-G' NOT '-shared' on this
# platform.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
;;
esac
fi
@@ -7665,52 +8296,52 @@ if test "$_lt_caught_CXX_error" != yes; then
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
- '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
_LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
- '"$_LT_TAGVAR(reload_cmds, $1)"
+ '"$_LT_TAGVAR(reload_cmds, $1)"
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
@@ -7741,10 +8372,10 @@ if test "$_lt_caught_CXX_error" != yes; then
esac
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
- test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+ test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
- _LT_TAGVAR(GCC, $1)="$GXX"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$GXX
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -7771,7 +8402,7 @@ if test "$_lt_caught_CXX_error" != yes; then
lt_cv_path_LD=$lt_save_path_LD
lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
+fi # test yes != "$_lt_caught_CXX_error"
AC_LANG_POP
])# _LT_LANG_CXX_CONFIG
@@ -7793,13 +8424,14 @@ AC_REQUIRE([_LT_DECL_SED])
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
func_stripname_cnf ()
{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ case @S|@2 in
+ .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
+ *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
esac
} # func_stripname_cnf
])# _LT_FUNC_STRIPNAME_CNF
+
# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
# Figure out "hidden" library dependencies from verbose
@@ -7883,13 +8515,13 @@ if AC_TRY_EVAL(ac_compile); then
pre_test_object_deps_done=no
for p in `eval "$output_verbose_link_cmd"`; do
- case ${prev}${p} in
+ case $prev$p in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
# Remove the space.
- if test $p = "-L" ||
- test $p = "-R"; then
+ if test x-L = "$p" ||
+ test x-R = "$p"; then
prev=$p
continue
fi
@@ -7905,16 +8537,16 @@ if AC_TRY_EVAL(ac_compile); then
case $p in
=*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
esac
- if test "$pre_test_object_deps_done" = no; then
- case ${prev} in
+ if test no = "$pre_test_object_deps_done"; then
+ case $prev in
-L | -R)
# Internal compiler library paths should come after those
# provided the user. The postdeps already come after the
# user supplied libs so there is no need to process them.
if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
else
- _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
fi
;;
# The "-l" case would never come before the object being
@@ -7922,9 +8554,9 @@ if AC_TRY_EVAL(ac_compile); then
esac
else
if test -z "$_LT_TAGVAR(postdeps, $1)"; then
- _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ _LT_TAGVAR(postdeps, $1)=$prev$p
else
- _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
fi
fi
prev=
@@ -7939,15 +8571,15 @@ if AC_TRY_EVAL(ac_compile); then
continue
fi
- if test "$pre_test_object_deps_done" = no; then
+ if test no = "$pre_test_object_deps_done"; then
if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
- _LT_TAGVAR(predep_objects, $1)="$p"
+ _LT_TAGVAR(predep_objects, $1)=$p
else
_LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
fi
else
if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
- _LT_TAGVAR(postdep_objects, $1)="$p"
+ _LT_TAGVAR(postdep_objects, $1)=$p
else
_LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
fi
@@ -7978,51 +8610,6 @@ interix[[3-9]]*)
_LT_TAGVAR(postdep_objects,$1)=
_LT_TAGVAR(postdeps,$1)=
;;
-
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
-
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-
-solaris*)
- case $cc_basename in
- CC* | sunCC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
esac
])
@@ -8031,7 +8618,7 @@ case " $_LT_TAGVAR(postdeps, $1) " in
esac
_LT_TAGVAR(compiler_lib_search_dirs, $1)=
if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
fi
_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
[The directories searched by this compiler when creating a shared library])
@@ -8051,10 +8638,10 @@ _LT_TAGDECL([], [compiler_lib_search_path], [1],
# --------------------------
# Ensure that the configuration variables for a Fortran 77 compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_F77_CONFIG],
[AC_LANG_PUSH(Fortran 77)
-if test -z "$F77" || test "X$F77" = "Xno"; then
+if test -z "$F77" || test no = "$F77"; then
_lt_disable_F77=yes
fi
@@ -8091,7 +8678,7 @@ _LT_TAGVAR(objext, $1)=$objext
# the F77 compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
+if test yes != "$_lt_disable_F77"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
@@ -8113,7 +8700,7 @@ if test "$_lt_disable_F77" != yes; then
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
+ lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${F77-"f77"}
@@ -8127,21 +8714,25 @@ if test "$_lt_disable_F77" != yes; then
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -8149,11 +8740,11 @@ if test "$_lt_disable_F77" != yes; then
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
- _LT_TAGVAR(GCC, $1)="$G77"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$G77
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -8170,9 +8761,9 @@ if test "$_lt_disable_F77" != yes; then
fi # test -n "$compiler"
GCC=$lt_save_GCC
- CC="$lt_save_CC"
- CFLAGS="$lt_save_CFLAGS"
-fi # test "$_lt_disable_F77" != yes
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_F77"
AC_LANG_POP
])# _LT_LANG_F77_CONFIG
@@ -8182,11 +8773,11 @@ AC_LANG_POP
# -------------------------
# Ensure that the configuration variables for a Fortran compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_FC_CONFIG],
[AC_LANG_PUSH(Fortran)
-if test -z "$FC" || test "X$FC" = "Xno"; then
+if test -z "$FC" || test no = "$FC"; then
_lt_disable_FC=yes
fi
@@ -8223,7 +8814,7 @@ _LT_TAGVAR(objext, $1)=$objext
# the FC compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
+if test yes != "$_lt_disable_FC"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
@@ -8245,7 +8836,7 @@ if test "$_lt_disable_FC" != yes; then
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
+ lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${FC-"f95"}
@@ -8261,21 +8852,25 @@ if test "$_lt_disable_FC" != yes; then
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -8283,11 +8878,11 @@ if test "$_lt_disable_FC" != yes; then
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
- _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -8307,7 +8902,7 @@ if test "$_lt_disable_FC" != yes; then
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
-fi # test "$_lt_disable_FC" != yes
+fi # test yes != "$_lt_disable_FC"
AC_LANG_POP
])# _LT_LANG_FC_CONFIG
@@ -8317,7 +8912,7 @@ AC_LANG_POP
# --------------------------
# Ensure that the configuration variables for the GNU Java Compiler compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GCJ_CONFIG],
[AC_REQUIRE([LT_PROG_GCJ])dnl
AC_LANG_SAVE
@@ -8351,7 +8946,7 @@ CC=${GCJ-"gcj"}
CFLAGS=$GCJFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
+_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# GCJ did not exist at the time GCC didn't implicitly link libc in.
@@ -8384,7 +8979,7 @@ CFLAGS=$lt_save_CFLAGS
# --------------------------
# Ensure that the configuration variables for the GNU Go compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GO_CONFIG],
[AC_REQUIRE([LT_PROG_GO])dnl
AC_LANG_SAVE
@@ -8418,7 +9013,7 @@ CC=${GOC-"gccgo"}
CFLAGS=$GOFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
+_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# Go did not exist at the time GCC didn't implicitly link libc in.
@@ -8451,7 +9046,7 @@ CFLAGS=$lt_save_CFLAGS
# -------------------------
# Ensure that the configuration variables for the Windows resource compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_RC_CONFIG],
[AC_REQUIRE([LT_PROG_RC])dnl
AC_LANG_SAVE
@@ -8467,7 +9062,7 @@ _LT_TAGVAR(objext, $1)=$objext
lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
+lt_simple_link_test_code=$lt_simple_compile_test_code
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
@@ -8477,7 +9072,7 @@ _LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
+lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=
@@ -8506,7 +9101,7 @@ AC_DEFUN([LT_PROG_GCJ],
[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
[m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
[AC_CHECK_TOOL(GCJ, gcj,)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
AC_SUBST(GCJFLAGS)])])[]dnl
])
@@ -8615,7 +9210,7 @@ lt_ac_count=0
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
+ test ! -f "$lt_ac_sed" && continue
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
@@ -8632,9 +9227,9 @@ for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
$lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
cmp -s conftest.out conftest.nl || break
# 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
+ test 10 -lt "$lt_ac_count" && break
lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
+ if test "$lt_ac_count" -gt "$lt_ac_max"; then
lt_ac_max=$lt_ac_count
lt_cv_path_SED=$lt_ac_sed
fi
@@ -8658,27 +9253,7 @@ dnl AC_DEFUN([LT_AC_PROG_SED], [])
# Find out whether the shell is Bourne or XSI compatible,
# or has some other useful features.
m4_defun([_LT_CHECK_SHELL_FEATURES],
-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-AC_MSG_RESULT([$xsi_shell])
-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
-
-AC_MSG_CHECKING([whether the shell understands "+="])
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-AC_MSG_RESULT([$lt_shell_append])
-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
lt_unset=false
@@ -8702,102 +9277,9 @@ _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
])# _LT_CHECK_SHELL_FEATURES
-# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
-# ------------------------------------------------------
-# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
-# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
-m4_defun([_LT_PROG_FUNCTION_REPLACE],
-[dnl {
-sed -e '/^$1 ()$/,/^} # $1 /c\
-$1 ()\
-{\
-m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
-} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-])
-
-
-# _LT_PROG_REPLACE_SHELLFNS
-# -------------------------
-# Replace existing portable implementations of several shell functions with
-# equivalent extended shell implementations where those features are available..
-m4_defun([_LT_PROG_REPLACE_SHELLFNS],
-[if test x"$xsi_shell" = xyes; then
- _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac])
-
- _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
- func_basename_result="${1##*/}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
- func_basename_result="${1##*/}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
- # positional parameters, so assign one to ordinary parameter first.
- func_stripname_result=${3}
- func_stripname_result=${func_stripname_result#"${1}"}
- func_stripname_result=${func_stripname_result%"${2}"}])
-
- _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
- func_split_long_opt_name=${1%%=*}
- func_split_long_opt_arg=${1#*=}])
-
- _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
- func_split_short_opt_arg=${1#??}
- func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
-
- _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
- case ${1} in
- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
- *) func_lo2o_result=${1} ;;
- esac])
-
- _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
-
- _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
-
- _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
-fi
-
-if test x"$lt_shell_append" = xyes; then
- _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
- func_quote_for_eval "${2}"
-dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
- eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
-
- # Save a `func_append' function call where possible by direct use of '+='
- sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-else
- # Save a `func_append' function call even when '+=' is not available
- sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
- AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
-fi
-])
-
# _LT_PATH_CONVERSION_FUNCTIONS
# -----------------------------
-# Determine which file name conversion functions should be used by
+# Determine what file name conversion functions should be used by
# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
# for certain cross-compile configurations and native mingw.
m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
@@ -8864,15 +9346,15 @@ _LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
# Helper functions for option handling. -*- Autoconf -*-
#
-# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# serial 7 ltoptions.m4
+# serial 8 ltoptions.m4
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
@@ -8893,7 +9375,7 @@ m4_define([_LT_SET_OPTION],
[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
_LT_MANGLE_DEFUN([$1], [$2]),
- [m4_warning([Unknown $1 option `$2'])])[]dnl
+ [m4_warning([Unknown $1 option '$2'])])[]dnl
])
@@ -8939,13 +9421,15 @@ m4_if([$1],[LT_INIT],[
dnl
dnl If no reference was made to various pairs of opposing options, then
dnl we run the default mode handler for the pair. For example, if neither
- dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl 'shared' nor 'disable-shared' was passed, we enable building of shared
dnl archives by default:
_LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
_LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
_LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
_LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
- [_LT_ENABLE_FAST_INSTALL])
+ [_LT_ENABLE_FAST_INSTALL])
+ _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4],
+ [_LT_WITH_AIX_SONAME([aix])])
])
])# _LT_SET_OPTIONS
@@ -8973,7 +9457,7 @@ AU_DEFUN([AC_LIBTOOL_DLOPEN],
[_LT_SET_OPTION([LT_INIT], [dlopen])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `dlopen' option into LT_INIT's first parameter.])
+put the 'dlopen' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
@@ -9009,7 +9493,7 @@ AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
_LT_SET_OPTION([LT_INIT], [win32-dll])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `win32-dll' option into LT_INIT's first parameter.])
+put the 'win32-dll' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
@@ -9018,9 +9502,9 @@ dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
# _LT_ENABLE_SHARED([DEFAULT])
# ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-shared flag, and supports the 'shared' and
+# 'disable-shared' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_SHARED],
[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([shared],
@@ -9033,14 +9517,14 @@ AC_ARG_ENABLE([shared],
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
@@ -9072,9 +9556,9 @@ dnl AC_DEFUN([AM_DISABLE_SHARED], [])
# _LT_ENABLE_STATIC([DEFAULT])
# ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-static flag, and support the 'static' and
+# 'disable-static' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_STATIC],
[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([static],
@@ -9087,14 +9571,14 @@ AC_ARG_ENABLE([static],
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_static=]_LT_ENABLE_STATIC_DEFAULT)
@@ -9126,9 +9610,9 @@ dnl AC_DEFUN([AM_DISABLE_STATIC], [])
# _LT_ENABLE_FAST_INSTALL([DEFAULT])
# ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-fast-install flag, and support the 'fast-install'
+# and 'disable-fast-install' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_FAST_INSTALL],
[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([fast-install],
@@ -9141,14 +9625,14 @@ AC_ARG_ENABLE([fast-install],
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
@@ -9165,14 +9649,14 @@ AU_DEFUN([AC_ENABLE_FAST_INSTALL],
[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `fast-install' option into LT_INIT's first parameter.])
+the 'fast-install' option into LT_INIT's first parameter.])
])
AU_DEFUN([AC_DISABLE_FAST_INSTALL],
[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `disable-fast-install' option into LT_INIT's first parameter.])
+the 'disable-fast-install' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
@@ -9180,11 +9664,64 @@ dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+# _LT_WITH_AIX_SONAME([DEFAULT])
+# ----------------------------------
+# implement the --with-aix-soname flag, and support the `aix-soname=aix'
+# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT
+# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'.
+m4_define([_LT_WITH_AIX_SONAME],
+[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl
+shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[[5-9]]*,yes)
+ AC_MSG_CHECKING([which variant of shared library versioning to provide])
+ AC_ARG_WITH([aix-soname],
+ [AS_HELP_STRING([--with-aix-soname=aix|svr4|both],
+ [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])],
+ [case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ AC_MSG_ERROR([Unknown argument to --with-aix-soname])
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname],
+ [AC_CACHE_VAL([lt_cv_with_aix_soname],
+ [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT)
+ with_aix_soname=$lt_cv_with_aix_soname])
+ AC_MSG_RESULT([$with_aix_soname])
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+_LT_DECL([], [shared_archive_member_spec], [0],
+ [Shared archive member basename, for filename based shared library versioning on AIX])dnl
+])# _LT_WITH_AIX_SONAME
+
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])])
+
+
# _LT_WITH_PIC([MODE])
# --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# implement the --with-pic flag, and support the 'pic-only' and 'no-pic'
# LT_INIT options.
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'.
m4_define([_LT_WITH_PIC],
[AC_ARG_WITH([pic],
[AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
@@ -9195,19 +9732,17 @@ m4_define([_LT_WITH_PIC],
*)
pic_mode=default
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for lt_pkg in $withval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$lt_pkg" = "X$lt_p"; then
pic_mode=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
- [pic_mode=default])
-
-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+ [pic_mode=m4_default([$1], [default])])
_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
])# _LT_WITH_PIC
@@ -9220,7 +9755,7 @@ AU_DEFUN([AC_LIBTOOL_PICMODE],
[_LT_SET_OPTION([LT_INIT], [pic-only])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `pic-only' option into LT_INIT's first parameter.])
+put the 'pic-only' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
@@ -9243,7 +9778,8 @@ LT_OPTION_DEFINE([LTDL_INIT], [convenience],
# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
@@ -9276,7 +9812,7 @@ m4_define([_lt_join],
# ------------
# Manipulate m4 lists.
# These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
+# Autoconf-2.59, which quotes differently.
m4_define([lt_car], [[$1]])
m4_define([lt_cdr],
[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
@@ -9287,7 +9823,7 @@ m4_define([lt_unquote], $1)
# lt_append(MACRO-NAME, STRING, [SEPARATOR])
# ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'.
# Note that neither SEPARATOR nor STRING are expanded; they are appended
# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
# No SEPARATOR is output if MACRO-NAME was previously undefined (different
@@ -9367,7 +9903,7 @@ m4_define([lt_dict_filter],
# ltversion.m4 -- version numbers -*- Autoconf -*-
#
-# Copyright (C) 2004 Free Software Foundation, Inc.
+# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc.
# Written by Scott James Remnant, 2004
#
# This file is free software; the Free Software Foundation gives
@@ -9376,22 +9912,23 @@ m4_define([lt_dict_filter],
# @configure_input@
-# serial 3337 ltversion.m4
+# serial 4179 ltversion.m4
# This file is part of GNU Libtool
-m4_define([LT_PACKAGE_VERSION], [2.4.2])
-m4_define([LT_PACKAGE_REVISION], [1.3337])
+m4_define([LT_PACKAGE_VERSION], [2.4.6])
+m4_define([LT_PACKAGE_REVISION], [2.4.6])
AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.4.2'
-macro_revision='1.3337'
+[macro_version='2.4.6'
+macro_revision='2.4.6'
_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
_LT_DECL(, macro_revision, 0)
])
# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Scott James Remnant, 2004.
#
# This file is free software; the Free Software Foundation gives
@@ -9402,7 +9939,7 @@ _LT_DECL(, macro_revision, 0)
# These exist entirely to fool aclocal when bootstrapping libtool.
#
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN),
# which have later been changed to m4_define as they aren't part of the
# exported API, or moved to Autoconf or Automake where they belong.
#
@@ -9416,7 +9953,7 @@ _LT_DECL(, macro_revision, 0)
# included after everything else. This provides aclocal with the
# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
# because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
#
# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
# Yes, that means every name once taken will need to remain here until
@@ -9488,20 +10025,20 @@ m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
-# nls.m4 serial 5 (gettext-0.18)
-dnl Copyright (C) 1995-2003, 2005-2006, 2008-2010 Free Software Foundation,
-dnl Inc.
+# nls.m4 serial 6 (gettext-0.20.2)
+dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014, 2016, 2019-2020 Free
+dnl Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
+dnl This file can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Lesser General Public
dnl License but which still want to provide support for the GNU gettext
dnl functionality.
dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
+dnl by the GNU Lesser General Public License, and the rest of the GNU
+dnl gettext package is covered by the GNU General Public License.
dnl They are *not* in the public domain.
dnl Authors:
@@ -9521,32 +10058,63 @@ AC_DEFUN([AM_NLS],
AC_SUBST([USE_NLS])
])
-# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
-# serial 1 (pkg-config-0.24)
-#
-# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
+# serial 12 (pkg-config-0.29.2)
-# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-# ----------------------------------
+dnl Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+dnl Copyright © 2012-2015 Dan Nicholson <dbn.lists@gmail.com>
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 2 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful, but
+dnl WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+dnl General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program; if not, write to the Free Software
+dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+dnl 02111-1307, USA.
+dnl
+dnl As a special exception to the GNU General Public License, if you
+dnl distribute this file as part of a program that contains a
+dnl configuration script generated by Autoconf, you may include it under
+dnl the same distribution terms that you use for the rest of that
+dnl program.
+
+dnl PKG_PREREQ(MIN-VERSION)
+dnl -----------------------
+dnl Since: 0.29
+dnl
+dnl Verify that the version of the pkg-config macros are at least
+dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's
+dnl installed version of pkg-config, this checks the developer's version
+dnl of pkg.m4 when generating configure.
+dnl
+dnl To ensure that this macro is defined, also add:
+dnl m4_ifndef([PKG_PREREQ],
+dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])])
+dnl
+dnl See the "Since" comment for each macro you use to see what version
+dnl of the macros you require.
+m4_defun([PKG_PREREQ],
+[m4_define([PKG_MACROS_VERSION], [0.29.2])
+m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1,
+ [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])])
+])dnl PKG_PREREQ
+
+dnl PKG_PROG_PKG_CONFIG([MIN-VERSION])
+dnl ----------------------------------
+dnl Since: 0.16
+dnl
+dnl Search for the pkg-config tool and set the PKG_CONFIG variable to
+dnl first found in the path. Checks that the version of pkg-config found
+dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is
+dnl used since that's the first version where most current features of
+dnl pkg-config existed.
AC_DEFUN([PKG_PROG_PKG_CONFIG],
[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
@@ -9568,18 +10136,19 @@ if test -n "$PKG_CONFIG"; then
PKG_CONFIG=""
fi
fi[]dnl
-])# PKG_PROG_PKG_CONFIG
+])dnl PKG_PROG_PKG_CONFIG
-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-#
-# Check to see whether a particular set of modules exists. Similar
-# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-#
-# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-# only at the first occurence in configure.ac, so if the first place
-# it's called might be skipped (such as if it is within an "if", you
-# have to call PKG_CHECK_EXISTS manually
-# --------------------------------------------------------------
+dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------------------------------
+dnl Since: 0.18
+dnl
+dnl Check to see whether a particular set of modules exists. Similar to
+dnl PKG_CHECK_MODULES(), but does not set variables or print errors.
+dnl
+dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+dnl only at the first occurence in configure.ac, so if the first place
+dnl it's called might be skipped (such as if it is within an "if", you
+dnl have to call PKG_CHECK_EXISTS manually
AC_DEFUN([PKG_CHECK_EXISTS],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
if test -n "$PKG_CONFIG" && \
@@ -9589,8 +10158,10 @@ m4_ifvaln([$3], [else
$3])dnl
fi])
-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-# ---------------------------------------------
+dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+dnl ---------------------------------------------
+dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting
+dnl pkg_failed based on the result.
m4_define([_PKG_CONFIG],
[if test -n "$$1"; then
pkg_cv_[]$1="$$1"
@@ -9602,10 +10173,11 @@ m4_define([_PKG_CONFIG],
else
pkg_failed=untried
fi[]dnl
-])# _PKG_CONFIG
+])dnl _PKG_CONFIG
-# _PKG_SHORT_ERRORS_SUPPORTED
-# -----------------------------
+dnl _PKG_SHORT_ERRORS_SUPPORTED
+dnl ---------------------------
+dnl Internal check to see if pkg-config supports short errors.
AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
@@ -9613,26 +10185,24 @@ if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
else
_pkg_short_errors_supported=no
fi[]dnl
-])# _PKG_SHORT_ERRORS_SUPPORTED
+])dnl _PKG_SHORT_ERRORS_SUPPORTED
-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-# [ACTION-IF-NOT-FOUND])
-#
-#
-# Note that if there is a possibility the first call to
-# PKG_CHECK_MODULES might not happen, you should be sure to include an
-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-#
-#
-# --------------------------------------------------------------
+dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl [ACTION-IF-NOT-FOUND])
+dnl --------------------------------------------------------------
+dnl Since: 0.4.0
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES might not happen, you should be sure to include an
+dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
AC_DEFUN([PKG_CHECK_MODULES],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
pkg_failed=no
-AC_MSG_CHECKING([for $1])
+AC_MSG_CHECKING([for $2])
_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
_PKG_CONFIG([$1][_LIBS], [libs], [$2])
@@ -9642,11 +10212,11 @@ and $1[]_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.])
if test $pkg_failed = yes; then
- AC_MSG_RESULT([no])
+ AC_MSG_RESULT([no])
_PKG_SHORT_ERRORS_SUPPORTED
if test $_pkg_short_errors_supported = yes; then
$1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
- else
+ else
$1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
@@ -9663,7 +10233,7 @@ installed software in a non-standard prefix.
_PKG_TEXT])[]dnl
])
elif test $pkg_failed = untried; then
- AC_MSG_RESULT([no])
+ AC_MSG_RESULT([no])
m4_default([$4], [AC_MSG_FAILURE(
[The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
@@ -9679,16 +10249,40 @@ else
AC_MSG_RESULT([yes])
$3
fi[]dnl
-])# PKG_CHECK_MODULES
+])dnl PKG_CHECK_MODULES
-# PKG_INSTALLDIR(DIRECTORY)
-# -------------------------
-# Substitutes the variable pkgconfigdir as the location where a module
-# should install pkg-config .pc files. By default the directory is
-# $libdir/pkgconfig, but the default can be changed by passing
-# DIRECTORY. The user can override through the --with-pkgconfigdir
-# parameter.
+dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl [ACTION-IF-NOT-FOUND])
+dnl ---------------------------------------------------------------------
+dnl Since: 0.29
+dnl
+dnl Checks for existence of MODULES and gathers its build flags with
+dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags
+dnl and VARIABLE-PREFIX_LIBS from --libs.
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to
+dnl include an explicit call to PKG_PROG_PKG_CONFIG in your
+dnl configure.ac.
+AC_DEFUN([PKG_CHECK_MODULES_STATIC],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+_save_PKG_CONFIG=$PKG_CONFIG
+PKG_CONFIG="$PKG_CONFIG --static"
+PKG_CHECK_MODULES($@)
+PKG_CONFIG=$_save_PKG_CONFIG[]dnl
+])dnl PKG_CHECK_MODULES_STATIC
+
+
+dnl PKG_INSTALLDIR([DIRECTORY])
+dnl -------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable pkgconfigdir as the location where a module
+dnl should install pkg-config .pc files. By default the directory is
+dnl $libdir/pkgconfig, but the default can be changed by passing
+dnl DIRECTORY. The user can override through the --with-pkgconfigdir
+dnl parameter.
AC_DEFUN([PKG_INSTALLDIR],
[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
m4_pushdef([pkg_description],
@@ -9699,16 +10293,18 @@ AC_ARG_WITH([pkgconfigdir],
AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
m4_popdef([pkg_default])
m4_popdef([pkg_description])
-]) dnl PKG_INSTALLDIR
+])dnl PKG_INSTALLDIR
-# PKG_NOARCH_INSTALLDIR(DIRECTORY)
-# -------------------------
-# Substitutes the variable noarch_pkgconfigdir as the location where a
-# module should install arch-independent pkg-config .pc files. By
-# default the directory is $datadir/pkgconfig, but the default can be
-# changed by passing DIRECTORY. The user can override through the
-# --with-noarch-pkgconfigdir parameter.
+dnl PKG_NOARCH_INSTALLDIR([DIRECTORY])
+dnl --------------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable noarch_pkgconfigdir as the location where a
+dnl module should install arch-independent pkg-config .pc files. By
+dnl default the directory is $datadir/pkgconfig, but the default can be
+dnl changed by passing DIRECTORY. The user can override through the
+dnl --with-noarch-pkgconfigdir parameter.
AC_DEFUN([PKG_NOARCH_INSTALLDIR],
[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
m4_pushdef([pkg_description],
@@ -9719,26 +10315,41 @@ AC_ARG_WITH([noarch-pkgconfigdir],
AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
m4_popdef([pkg_default])
m4_popdef([pkg_description])
-]) dnl PKG_NOARCH_INSTALLDIR
+])dnl PKG_NOARCH_INSTALLDIR
+
-# Copyright (C) 2002-2012 Free Software Foundation, Inc.
+dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
+dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------
+dnl Since: 0.28
+dnl
+dnl Retrieves the value of the pkg-config variable for the given module.
+AC_DEFUN([PKG_CHECK_VAR],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
+
+_PKG_CONFIG([$1], [variable="][$3]["], [$2])
+AS_VAR_COPY([$1], [pkg_cv_][$1])
+
+AS_VAR_IF([$1], [""], [$5], [$4])dnl
+])dnl PKG_CHECK_VAR
+
+# Copyright (C) 2002-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 8
-
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.12'
+[am__api_version='1.16'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.12.2], [],
+m4_if([$1], [1.16.4], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -9754,21 +10365,19 @@ m4_define([_AM_AUTOCONF_VERSION], [])
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.12.2])dnl
+[AM_AUTOMAKE_VERSION([1.16.4])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 2
-
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
@@ -9808,22 +10417,19 @@ _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# configured tree to be moved without reconfiguration.
AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
])
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997-2012 Free Software Foundation, Inc.
+# Copyright (C) 1997-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 10
-
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
@@ -9849,13 +10455,12 @@ AC_CONFIG_COMMANDS_PRE(
Usually this means the macro was only invoked conditionally.]])
fi])])
-# Copyright (C) 1999-2012 Free Software Foundation, Inc.
+# Copyright (C) 1999-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 17
# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
@@ -10041,64 +10646,56 @@ _AM_SUBST_NOTMAKE([am__nodep])dnl
# Generate code to set up dependency tracking. -*- Autoconf -*-
-# Copyright (C) 1999-2012 Free Software Foundation, Inc.
+# Copyright (C) 1999-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 6
-
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[{
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
+ # TODO: see whether this extra hack can be removed once we start
+ # requiring Autoconf 2.70 or later.
+ AS_CASE([$CONFIG_FILES],
+ [*\'*], [eval set x "$CONFIG_FILES"],
+ [*], [set x $CONFIG_FILES])
shift
- for mf
+ # Used to flag and report bootstrapping failures.
+ am_rc=0
+ for am_mf
do
# Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named 'Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
+ am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile which includes
+ # dependency-tracking related rules and includes.
+ # Grep'ing the whole file directly is not great: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running 'make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
+ sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
+ || continue
+ am_dirpart=`AS_DIRNAME(["$am_mf"])`
+ am_filepart=`AS_BASENAME(["$am_mf"])`
+ AM_RUN_LOG([cd "$am_dirpart" \
+ && sed -e '/# am--include-marker/d' "$am_filepart" \
+ | $MAKE -f - am--depfiles]) || am_rc=$?
done
+ if test $am_rc -ne 0; then
+ AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments
+ for automatic dependency tracking. If GNU make was not used, consider
+ re-running the configure script with MAKE="gmake" (or whatever is
+ necessary). You can also try re-running configure with the
+ '--disable-dependency-tracking' option to at least be able to build
+ the package (albeit without support for automatic dependency tracking).])
+ fi
+ AS_UNSET([am_dirpart])
+ AS_UNSET([am_filepart])
+ AS_UNSET([am_mf])
+ AS_UNSET([am_rc])
+ rm -f conftest-deps.mk
}
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
@@ -10107,39 +10704,31 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each '.P' file that we will
-# need in order to bootstrap the dependency handling code.
+# This code is only required when automatic dependency tracking is enabled.
+# This creates each '.Po' and '.Plo' makefile fragment that we'll need in
+# order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
-AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
+ [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])])
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Copyright (C) 1996-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 19
-
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
@@ -10152,7 +10741,7 @@ AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
+[AC_PREREQ([2.65])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
@@ -10182,15 +10771,14 @@ AC_SUBST([CYGPATH_W])
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[AC_DIAGNOSE([obsolete],
-[$0: two- and three-arguments forms are deprecated. For more info, see:
-http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation])
+ [$0: two- and three-arguments forms are deprecated.])
m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
m4_if(
- m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+ m4_ifset([AC_PACKAGE_NAME], [ok]):m4_ifset([AC_PACKAGE_VERSION], [ok]),
[ok:ok],,
[m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
@@ -10213,11 +10801,11 @@ AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
AC_REQUIRE([AC_PROG_MKDIR_P])dnl
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
@@ -10237,21 +10825,77 @@ AC_PROVIDE_IFELSE([AC_PROG_OBJC],
[_AM_DEPENDENCIES([OBJC])],
[m4_define([AC_PROG_OBJC],
m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
-dnl Support for Objective C++ was only introduced in Autoconf 2.65,
-dnl but we still cater to Autoconf 2.62.
-m4_ifdef([AC_PROG_OBJCXX],
-[AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
[_AM_DEPENDENCIES([OBJCXX])],
[m4_define([AC_PROG_OBJCXX],
- m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])])dnl
+ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The 'parallel-tests' driver may need to know about EXEEXT, so add the
-dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+# Variables for tags utilities; see am/tags.am
+if test -z "$CTAGS"; then
+ CTAGS=ctags
+fi
+AC_SUBST([CTAGS])
+if test -z "$ETAGS"; then
+ ETAGS=etags
+fi
+AC_SUBST([ETAGS])
+if test -z "$CSCOPE"; then
+ CSCOPE=cscope
+fi
+AC_SUBST([CSCOPE])
+
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
[AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <https://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+ fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
])
dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
@@ -10260,7 +10904,6 @@ dnl mangled by Autoconf and run in a shell conditional statement.
m4_define([_AC_COMPILER_EXEEXT],
m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
@@ -10282,20 +10925,18 @@ for _am_header in $config_headers :; do
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 8
-
# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -10305,14 +10946,12 @@ if test x"${install_sh}" != xset; then
fi
AC_SUBST([install_sh])])
-# Copyright (C) 2003-2012 Free Software Foundation, Inc.
+# Copyright (C) 2003-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 2
-
# Check whether the underlying file-system supports filenames
# with a leading dot. For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
@@ -10329,14 +10968,12 @@ AC_SUBST([am__leading_dot])])
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
# From Jim Meyering
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Copyright (C) 1996-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 7
-
# AM_MAINTAINER_MODE([DEFAULT-MODE])
# ----------------------------------
# Control maintainer-specific portions of Makefiles.
@@ -10364,104 +11001,57 @@ AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
]
)
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-
# Check to see how 'make' treats includes. -*- Autoconf -*-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 5
-
# AM_MAKE_INCLUDE()
# -----------------
-# Check to see how make treats includes.
+# Check whether make has an 'include' directive that can support all
+# the idioms we need for our automatic dependency tracking code.
AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
+[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive])
+cat > confinc.mk << 'END'
am__doit:
- @echo this is the am__doit target
+ @echo this is the am__doit target >confinc.out
.PHONY: am__doit
END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
am__include="#"
am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Copyright (C) 1999-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# AM_PROG_CC_C_O
-# --------------
-# Like AC_PROG_CC_C_O, but changed for automake.
-AC_DEFUN([AM_PROG_CC_C_O],
-[AC_REQUIRE([AC_PROG_CC_C_O])dnl
-AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([compile])dnl
-# FIXME: we rely on the cache variable name because
-# there is no other way.
-set dummy $CC
-am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']`
-eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
-if test "$am_t" != yes; then
- # Losing compiler, so override with the script.
- # FIXME: It is wrong to rewrite CC.
- # But if we don't then we get into trouble of one sort or another.
- # A longer-term fix would be to have automake use am__CC in this case,
- # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
- CC="$am_aux_dir/compile $CC"
-fi
-dnl Make sure AC_PROG_CC is never called again, or it will override our
-dnl setting of CC.
-m4_define([AC_PROG_CC],
- [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])])
-])
+# BSD make does it like this.
+echo '.include "confinc.mk" # ignored' > confmf.BSD
+# Other make implementations (GNU, Solaris 10, AIX) do it like this.
+echo 'include confinc.mk # ignored' > confmf.GNU
+_am_result=no
+for s in GNU BSD; do
+ AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out])
+ AS_CASE([$?:`cat confinc.out 2>/dev/null`],
+ ['0:this is the am__doit target'],
+ [AS_CASE([$s],
+ [BSD], [am__include='.include' am__quote='"'],
+ [am__include='include' am__quote=''])])
+ if test "$am__include" != "#"; then
+ _am_result="yes ($s style)"
+ break
+ fi
+done
+rm -f confinc.* confmf.*
+AC_MSG_RESULT([${_am_result}])
+AC_SUBST([am__include])])
+AC_SUBST([am__quote])])
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997-2012 Free Software Foundation, Inc.
+# Copyright (C) 1997-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 7
-
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
@@ -10469,41 +11059,62 @@ AC_DEFUN([AM_MISSING_PROG],
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])
-
# AM_MISSING_HAS_RUN
# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([missing])dnl
if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
+ MISSING="\${SHELL} '$am_aux_dir/missing'"
fi
# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
else
am_missing_run=
AC_MSG_WARN(['missing' script is too old or missing])
fi
])
+# -*- Autoconf -*-
+# Obsolete and "removed" macros, that must however still report explicit
+# error messages when used, to smooth transition.
+#
+# Copyright (C) 1996-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([AM_CONFIG_HEADER],
+[AC_DIAGNOSE([obsolete],
+['$0': this macro is obsolete.
+You should use the 'AC][_CONFIG_HEADERS' macro instead.])dnl
+AC_CONFIG_HEADERS($@)])
+
+AC_DEFUN([AM_PROG_CC_STDC],
+[AC_PROG_CC
+am_cv_prog_cc_stdc=$ac_cv_prog_cc_stdc
+AC_DIAGNOSE([obsolete],
+['$0': this macro is obsolete.
+You should simply use the 'AC][_PROG_CC' macro instead.
+Also, your code should no longer depend upon 'am_cv_prog_cc_stdc',
+but upon 'ac_cv_prog_cc_stdc'.])])
+
+AC_DEFUN([AM_C_PROTOTYPES],
+ [AC_FATAL([automatic de-ANSI-fication support has been removed])])
+AU_DEFUN([fp_C_PROTOTYPES], [AM_C_PROTOTYPES])
+
# Helper functions for option handling. -*- Autoconf -*-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 6
-
# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
@@ -10527,13 +11138,58 @@ AC_DEFUN([_AM_SET_OPTIONS],
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+# Copyright (C) 1999-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 1
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+ [whether $CC understands -c and -o together],
+ [am_cv_prog_cc_c_o],
+ [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
# AM_RUN_LOG(COMMAND)
# -------------------
@@ -10548,14 +11204,12 @@ AC_DEFUN([AM_RUN_LOG],
# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Copyright (C) 1996-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 9
-
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
@@ -10631,14 +11285,12 @@ AC_CONFIG_COMMANDS_PRE(
rm -f conftest.file
])
-# Copyright (C) 2009-2012 Free Software Foundation, Inc.
+# Copyright (C) 2009-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 3
-
# AM_SILENT_RULES([DEFAULT])
# --------------------------
# Enable less verbose build rules; with the default set to DEFAULT
@@ -10693,14 +11345,12 @@ AC_SUBST([AM_BACKSLASH])dnl
_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
])
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+# Copyright (C) 2001-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 2
-
# AM_PROG_INSTALL_STRIP
# ---------------------
# One issue with vendor 'install' (even GNU) is that you can't
@@ -10723,14 +11373,12 @@ fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
-# Copyright (C) 2006-2012 Free Software Foundation, Inc.
+# Copyright (C) 2006-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 3
-
# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
@@ -10744,14 +11392,12 @@ AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
# Check how to create a tarball. -*- Autoconf -*-
-# Copyright (C) 2004-2012 Free Software Foundation, Inc.
+# Copyright (C) 2004-2021 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 3
-
# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
@@ -10765,76 +11411,114 @@ AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
+#
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
+
+# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of '-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
diff --git a/compile b/compile
index 862a14e..df363c8 100755
--- a/compile
+++ b/compile
@@ -1,10 +1,9 @@
#! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
-scriptversion=2012-03-05.13; # UTC
+scriptversion=2018-03-07.03; # UTC
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010, 2012 Free
-# Software Foundation, Inc.
+# Copyright (C) 1999-2021 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
@@ -18,7 +17,7 @@ scriptversion=2012-03-05.13; # UTC
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# along with this program. If not, see <https://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -54,7 +53,7 @@ func_file_conv ()
MINGW*)
file_conv=mingw
;;
- CYGWIN*)
+ CYGWIN* | MSYS*)
file_conv=cygwin
;;
*)
@@ -68,7 +67,7 @@ func_file_conv ()
mingw/*)
file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
;;
- cygwin/*)
+ cygwin/* | msys/*)
file=`cygpath -m "$file" || echo "$file"`
;;
wine/*)
@@ -113,6 +112,11 @@ func_cl_dashl ()
lib=$dir/$lib.lib
break
fi
+ if test -f "$dir/lib$lib.a"; then
+ found=yes
+ lib=$dir/lib$lib.a
+ break
+ fi
done
IFS=$save_IFS
@@ -251,7 +255,8 @@ EOF
echo "compile $scriptversion"
exit $?
;;
- cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
+ icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
func_cl_wrapper "$@" # Doesn't return...
;;
esac
@@ -335,9 +340,9 @@ exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
diff --git a/config.guess b/config.guess
index d622a44..f50dcdb 100755
--- a/config.guess
+++ b/config.guess
@@ -1,14 +1,12 @@
#! /bin/sh
# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
+# Copyright 1992-2018 Free Software Foundation, Inc.
-timestamp='2012-02-10'
+timestamp='2018-02-24'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
@@ -17,24 +15,22 @@ timestamp='2012-02-10'
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, see <https://www.gnu.org/licenses/>.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner. Please send patches (context
-# diff format) to <config-patches@gnu.org> and include a ChangeLog
-# entry.
+# the same distribution terms that you use for the rest of that
+# program. This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
#
# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+#
+# Please send patches to <config-patches@gnu.org>.
+
me=`echo "$0" | sed -e 's,.*/,,'`
@@ -43,7 +39,7 @@ Usage: $0 [OPTION]
Output the configuration name of the system \`$me' is run on.
-Operation modes:
+Options:
-h, --help print this help, then exit
-t, --time-stamp print date of last modification, then exit
-v, --version print version number, then exit
@@ -54,9 +50,7 @@ version="\
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
+Copyright 1992-2018 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -113,9 +107,9 @@ trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
dummy=$tmp/dummy ;
tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int x;" > $dummy.c ;
+ ,,) echo "int x;" > "$dummy.c" ;
for c in cc gcc c89 c99 ; do
- if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ if ($c -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
CC_FOR_BUILD="$c"; break ;
fi ;
done ;
@@ -138,9 +132,37 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+case "$UNAME_SYSTEM" in
+Linux|GNU|GNU/*)
+ # If the system lacks a compiler, then just pick glibc.
+ # We could probably try harder.
+ LIBC=gnu
+
+ eval "$set_cc_for_build"
+ cat <<-EOF > "$dummy.c"
+ #include <features.h>
+ #if defined(__UCLIBC__)
+ LIBC=uclibc
+ #elif defined(__dietlibc__)
+ LIBC=dietlibc
+ #else
+ LIBC=gnu
+ #endif
+ EOF
+ eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`"
+
+ # If ldd exists, use it to detect musl libc.
+ if command -v ldd >/dev/null && \
+ ldd --version 2>&1 | grep -q ^musl
+ then
+ LIBC=musl
+ fi
+ ;;
+esac
+
# Note: order is significant - the case branches are not exclusive.
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in
*:NetBSD:*:*)
# NetBSD (nbsd) targets should (where applicable) match one or
# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
@@ -153,21 +175,31 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
# Note: NetBSD doesn't particularly care about the vendor
# portion of the name. We always set it to "unknown".
sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
- case "${UNAME_MACHINE_ARCH}" in
+ UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
+ "/sbin/$sysctl" 2>/dev/null || \
+ "/usr/sbin/$sysctl" 2>/dev/null || \
+ echo unknown)`
+ case "$UNAME_MACHINE_ARCH" in
armeb) machine=armeb-unknown ;;
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
sh5el) machine=sh5le-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ earmv*)
+ arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
+ endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'`
+ machine="${arch}${endian}"-unknown
+ ;;
+ *) machine="$UNAME_MACHINE_ARCH"-unknown ;;
esac
# The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
+ # to ELF recently (or will in the future) and ABI.
+ case "$UNAME_MACHINE_ARCH" in
+ earm*)
+ os=netbsdelf
+ ;;
arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
+ eval "$set_cc_for_build"
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ELF__
then
@@ -182,40 +214,67 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
os=netbsd
;;
esac
+ # Determine ABI tags.
+ case "$UNAME_MACHINE_ARCH" in
+ earm*)
+ expr='s/^earmv[0-9]/-eabi/;s/eb$//'
+ abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"`
+ ;;
+ esac
# The OS release
# Debian GNU/NetBSD machines have a different userland, and
# thus, need a distinct triplet. However, they do not need
# kernel version information, so it can be replaced with a
# suitable tag, in the style of linux-gnu.
- case "${UNAME_VERSION}" in
+ case "$UNAME_VERSION" in
Debian*)
release='-gnu'
;;
*)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2`
;;
esac
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
+ echo "$machine-${os}${release}${abi}"
+ exit ;;
+ *:Bitrig:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+ echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE"
exit ;;
*:OpenBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
- echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE"
+ exit ;;
+ *:LibertyBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
+ echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE"
+ exit ;;
+ *:MidnightBSD:*:*)
+ echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE"
exit ;;
*:ekkoBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE"
exit ;;
*:SolidBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+ echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE"
exit ;;
macppc:MirBSD:*:*)
- echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+ echo powerpc-unknown-mirbsd"$UNAME_RELEASE"
exit ;;
*:MirBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE"
+ exit ;;
+ *:Sortix:*:*)
+ echo "$UNAME_MACHINE"-unknown-sortix
exit ;;
+ *:Redox:*:*)
+ echo "$UNAME_MACHINE"-unknown-redox
+ exit ;;
+ mips:OSF1:*.*)
+ echo mips-dec-osf1
+ exit ;;
alpha:OSF1:*:*)
case $UNAME_RELEASE in
*4.0)
@@ -232,63 +291,54 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
case "$ALPHA_CPU_TYPE" in
"EV4 (21064)")
- UNAME_MACHINE="alpha" ;;
+ UNAME_MACHINE=alpha ;;
"EV4.5 (21064)")
- UNAME_MACHINE="alpha" ;;
+ UNAME_MACHINE=alpha ;;
"LCA4 (21066/21068)")
- UNAME_MACHINE="alpha" ;;
+ UNAME_MACHINE=alpha ;;
"EV5 (21164)")
- UNAME_MACHINE="alphaev5" ;;
+ UNAME_MACHINE=alphaev5 ;;
"EV5.6 (21164A)")
- UNAME_MACHINE="alphaev56" ;;
+ UNAME_MACHINE=alphaev56 ;;
"EV5.6 (21164PC)")
- UNAME_MACHINE="alphapca56" ;;
+ UNAME_MACHINE=alphapca56 ;;
"EV5.7 (21164PC)")
- UNAME_MACHINE="alphapca57" ;;
+ UNAME_MACHINE=alphapca57 ;;
"EV6 (21264)")
- UNAME_MACHINE="alphaev6" ;;
+ UNAME_MACHINE=alphaev6 ;;
"EV6.7 (21264A)")
- UNAME_MACHINE="alphaev67" ;;
+ UNAME_MACHINE=alphaev67 ;;
"EV6.8CB (21264C)")
- UNAME_MACHINE="alphaev68" ;;
+ UNAME_MACHINE=alphaev68 ;;
"EV6.8AL (21264B)")
- UNAME_MACHINE="alphaev68" ;;
+ UNAME_MACHINE=alphaev68 ;;
"EV6.8CX (21264D)")
- UNAME_MACHINE="alphaev68" ;;
+ UNAME_MACHINE=alphaev68 ;;
"EV6.9A (21264/EV69A)")
- UNAME_MACHINE="alphaev69" ;;
+ UNAME_MACHINE=alphaev69 ;;
"EV7 (21364)")
- UNAME_MACHINE="alphaev7" ;;
+ UNAME_MACHINE=alphaev7 ;;
"EV7.9 (21364A)")
- UNAME_MACHINE="alphaev79" ;;
+ UNAME_MACHINE=alphaev79 ;;
esac
# A Pn.n version is a patched version.
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`"
# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
exitcode=$?
trap '' 0
exit $exitcode ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit ;;
Amiga*:UNIX_System_V:4.0:*)
echo m68k-unknown-sysv4
exit ;;
*:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
+ echo "$UNAME_MACHINE"-unknown-amigaos
exit ;;
*:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
+ echo "$UNAME_MACHINE"-unknown-morphos
exit ;;
*:OS/390:*:*)
echo i370-ibm-openedition
@@ -300,9 +350,9 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
echo powerpc-ibm-os400
exit ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
+ echo arm-acorn-riscix"$UNAME_RELEASE"
exit ;;
- arm:riscos:*:*|arm:RISCOS:*:*)
+ arm*:riscos:*:*|arm*:RISCOS:*:*)
echo arm-unknown-riscos
exit ;;
SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
@@ -327,38 +377,38 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
sparc) echo sparc-icl-nx7; exit ;;
esac ;;
s390x:SunOS:*:*)
- echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
exit ;;
sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
exit ;;
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
exit ;;
i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
- echo i386-pc-auroraux${UNAME_RELEASE}
+ echo i386-pc-auroraux"$UNAME_RELEASE"
exit ;;
i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
- eval $set_cc_for_build
- SUN_ARCH="i386"
+ eval "$set_cc_for_build"
+ SUN_ARCH=i386
# If there is a compiler, see if it is configured for 64-bit objects.
# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
# This test works for both compilers.
- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_64BIT_ARCH >/dev/null
then
- SUN_ARCH="x86_64"
+ SUN_ARCH=x86_64
fi
fi
- echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
exit ;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
# SunOS6. Hard to guess exactly what SunOS6 will be like, but
# it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
exit ;;
sun4*:SunOS:*:*)
case "`/usr/bin/arch -k`" in
@@ -367,25 +417,25 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
;;
esac
# Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`"
exit ;;
sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
+ echo m68k-sun-sunos"$UNAME_RELEASE"
exit ;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3
case "`/bin/arch`" in
sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
+ echo m68k-sun-sunos"$UNAME_RELEASE"
;;
sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
+ echo sparc-sun-sunos"$UNAME_RELEASE"
;;
esac
exit ;;
aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
+ echo sparc-auspex-sunos"$UNAME_RELEASE"
exit ;;
# The situation for MiNT is a little confusing. The machine name
# can be virtually everything (everything which is not
@@ -396,44 +446,44 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
# MiNT. But MiNT is downward compatible to TOS, so this should
# be no problem.
atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
+ echo m68k-atari-mint"$UNAME_RELEASE"
exit ;;
atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
+ echo m68k-atari-mint"$UNAME_RELEASE"
exit ;;
*falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
+ echo m68k-atari-mint"$UNAME_RELEASE"
exit ;;
milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
+ echo m68k-milan-mint"$UNAME_RELEASE"
exit ;;
hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
+ echo m68k-hades-mint"$UNAME_RELEASE"
exit ;;
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
+ echo m68k-unknown-mint"$UNAME_RELEASE"
exit ;;
m68k:machten:*:*)
- echo m68k-apple-machten${UNAME_RELEASE}
+ echo m68k-apple-machten"$UNAME_RELEASE"
exit ;;
powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
+ echo powerpc-apple-machten"$UNAME_RELEASE"
exit ;;
RISC*:Mach:*:*)
echo mips-dec-mach_bsd4.3
exit ;;
RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
+ echo mips-dec-ultrix"$UNAME_RELEASE"
exit ;;
VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
+ echo vax-dec-ultrix"$UNAME_RELEASE"
exit ;;
2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
+ echo clipper-intergraph-clix"$UNAME_RELEASE"
exit ;;
mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
+ eval "$set_cc_for_build"
+ sed 's/^ //' << EOF > "$dummy.c"
#ifdef __cplusplus
#include <stdio.h> /* for printf() prototype */
int main (int argc, char *argv[]) {
@@ -442,23 +492,23 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
#endif
#if defined (host_mips) && defined (MIPSEB)
#if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0);
#endif
#endif
exit (-1);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c &&
- dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
- SYSTEM_NAME=`$dummy $dummyarg` &&
+ $CC_FOR_BUILD -o "$dummy" "$dummy.c" &&
+ dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`"$dummy" "$dummyarg"` &&
{ echo "$SYSTEM_NAME"; exit; }
- echo mips-mips-riscos${UNAME_RELEASE}
+ echo mips-mips-riscos"$UNAME_RELEASE"
exit ;;
Motorola:PowerMAX_OS:*:*)
echo powerpc-motorola-powermax
@@ -484,17 +534,17 @@ EOF
AViiON:dgux:*:*)
# DG/UX returns AViiON for all architectures
UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ]
then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
+ if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \
+ [ "$TARGET_BINARY_INTERFACE"x = x ]
then
- echo m88k-dg-dgux${UNAME_RELEASE}
+ echo m88k-dg-dgux"$UNAME_RELEASE"
else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ echo m88k-dg-dguxbcs"$UNAME_RELEASE"
fi
else
- echo i586-dg-dgux${UNAME_RELEASE}
+ echo i586-dg-dgux"$UNAME_RELEASE"
fi
exit ;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
@@ -511,7 +561,7 @@ EOF
echo m68k-tektronix-bsd
exit ;;
*:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`"
exit ;;
????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
@@ -523,14 +573,14 @@ EOF
if [ -x /usr/bin/oslevel ] ; then
IBM_REV=`/usr/bin/oslevel`
else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV"
exit ;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
+ eval "$set_cc_for_build"
+ sed 's/^ //' << EOF > "$dummy.c"
#include <sys/systemcfg.h>
main()
@@ -541,7 +591,7 @@ EOF
exit(0);
}
EOF
- if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"`
then
echo "$SYSTEM_NAME"
else
@@ -555,26 +605,27 @@ EOF
exit ;;
*:AIX:*:[4567])
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then
IBM_ARCH=rs6000
else
IBM_ARCH=powerpc
fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
+ if [ -x /usr/bin/lslpp ] ; then
+ IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+ awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ echo "$IBM_ARCH"-ibm-aix"$IBM_REV"
exit ;;
*:AIX:*:*)
echo rs6000-ibm-aix
exit ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*)
echo romp-ibm-bsd4.4
exit ;;
ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ echo romp-ibm-bsd"$UNAME_RELEASE" # 4.3 with uname added to
exit ;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
echo rs6000-bull-bosx
@@ -589,28 +640,28 @@ EOF
echo m68k-hp-bsd4.4
exit ;;
9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
+ HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
+ case "$UNAME_MACHINE" in
+ 9000/31?) HP_ARCH=m68000 ;;
+ 9000/[34]??) HP_ARCH=m68k ;;
9000/[678][0-9][0-9])
if [ -x /usr/bin/getconf ]; then
sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ case "$sc_cpu_version" in
+ 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ case "$sc_kernel_bits" in
+ 32) HP_ARCH=hppa2.0n ;;
+ 64) HP_ARCH=hppa2.0w ;;
+ '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20
esac ;;
esac
fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
+ if [ "$HP_ARCH" = "" ]; then
+ eval "$set_cc_for_build"
+ sed 's/^ //' << EOF > "$dummy.c"
#define _HPUX_SOURCE
#include <stdlib.h>
@@ -643,13 +694,13 @@ EOF
exit (0);
}
EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"`
test -z "$HP_ARCH" && HP_ARCH=hppa
fi ;;
esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
+ if [ "$HP_ARCH" = hppa2.0w ]
then
- eval $set_cc_for_build
+ eval "$set_cc_for_build"
# hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
# 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
@@ -660,23 +711,23 @@ EOF
# $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
# => hppa64-hp-hpux11.23
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
grep -q __LP64__
then
- HP_ARCH="hppa2.0w"
+ HP_ARCH=hppa2.0w
else
- HP_ARCH="hppa64"
+ HP_ARCH=hppa64
fi
fi
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ echo "$HP_ARCH"-hp-hpux"$HPUX_REV"
exit ;;
ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
+ HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux"$HPUX_REV"
exit ;;
3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
+ eval "$set_cc_for_build"
+ sed 's/^ //' << EOF > "$dummy.c"
#include <unistd.h>
int
main ()
@@ -701,11 +752,11 @@ EOF
exit (0);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` &&
{ echo "$SYSTEM_NAME"; exit; }
echo unknown-hitachi-hiuxwe2
exit ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*)
echo hppa1.1-hp-bsd
exit ;;
9000/8??:4.3bsd:*:*)
@@ -714,7 +765,7 @@ EOF
*9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
echo hppa1.0-hp-mpeix
exit ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*)
echo hppa1.1-hp-osf
exit ;;
hp8??:OSF1:*:*)
@@ -722,9 +773,9 @@ EOF
exit ;;
i*86:OSF1:*:*)
if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
+ echo "$UNAME_MACHINE"-unknown-osf1mk
else
- echo ${UNAME_MACHINE}-unknown-osf1
+ echo "$UNAME_MACHINE"-unknown-osf1
fi
exit ;;
parisc*:Lites*:*:*)
@@ -749,124 +800,109 @@ EOF
echo c4-convex-bsd
exit ;;
CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
exit ;;
CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \
| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-e 's/\.[^.]*$/.X/'
exit ;;
CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
exit ;;
CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
exit ;;
CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
exit ;;
*:UNICOS/mp:*:*)
- echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
exit ;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
+ FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+ FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'`
echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit ;;
5000:UNIX_System_V:4.*:*)
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+ FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit ;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE"
exit ;;
sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
+ echo sparc-unknown-bsdi"$UNAME_RELEASE"
exit ;;
*:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE"
exit ;;
*:FreeBSD:*:*)
UNAME_PROCESSOR=`/usr/bin/uname -p`
- case ${UNAME_PROCESSOR} in
+ case "$UNAME_PROCESSOR" in
amd64)
- echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- *)
- echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ UNAME_PROCESSOR=x86_64 ;;
+ i386)
+ UNAME_PROCESSOR=i586 ;;
esac
+ echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
exit ;;
i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
+ echo "$UNAME_MACHINE"-pc-cygwin
exit ;;
- *:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
+ *:MINGW64*:*)
+ echo "$UNAME_MACHINE"-pc-mingw64
exit ;;
- i*:MSYS*:*)
- echo ${UNAME_MACHINE}-pc-msys
+ *:MINGW*:*)
+ echo "$UNAME_MACHINE"-pc-mingw32
exit ;;
- i*:windows32*:*)
- # uname -m includes "-pc" on this system.
- echo ${UNAME_MACHINE}-mingw32
+ *:MSYS*:*)
+ echo "$UNAME_MACHINE"-pc-msys
exit ;;
i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
+ echo "$UNAME_MACHINE"-pc-pw32
exit ;;
*:Interix*:*)
- case ${UNAME_MACHINE} in
+ case "$UNAME_MACHINE" in
x86)
- echo i586-pc-interix${UNAME_RELEASE}
+ echo i586-pc-interix"$UNAME_RELEASE"
exit ;;
authenticamd | genuineintel | EM64T)
- echo x86_64-unknown-interix${UNAME_RELEASE}
+ echo x86_64-unknown-interix"$UNAME_RELEASE"
exit ;;
IA64)
- echo ia64-unknown-interix${UNAME_RELEASE}
+ echo ia64-unknown-interix"$UNAME_RELEASE"
exit ;;
esac ;;
- [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
- echo i${UNAME_MACHINE}-pc-mks
- exit ;;
- 8664:Windows_NT:*)
- echo x86_64-pc-mks
- exit ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i586-pc-interix
- exit ;;
i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
+ echo "$UNAME_MACHINE"-pc-uwin
exit ;;
amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
echo x86_64-unknown-cygwin
exit ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit ;;
prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
exit ;;
*:GNU:*:*)
# the GNU system
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`"
exit ;;
*:GNU/*:*:*)
# other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC"
exit ;;
i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
+ echo "$UNAME_MACHINE"-pc-minix
exit ;;
aarch64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
aarch64_be:Linux:*:*)
UNAME_MACHINE=aarch64_be
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
alpha:Linux:*:*)
case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
@@ -879,63 +915,64 @@ EOF
EV68*) UNAME_MACHINE=alphaev68 ;;
esac
objdump --private-headers /bin/sh | grep -q ld.so.1
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ arc:Linux:*:* | arceb:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
arm*:Linux:*:*)
- eval $set_cc_for_build
+ eval "$set_cc_for_build"
if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_EABI__
then
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
else
if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_PCS_VFP
then
- echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi
else
- echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf
fi
fi
exit ;;
avr32*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
cris:Linux:*:*)
- echo ${UNAME_MACHINE}-axis-linux-gnu
+ echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
exit ;;
crisv32:Linux:*:*)
- echo ${UNAME_MACHINE}-axis-linux-gnu
+ echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
+ exit ;;
+ e2k:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
frv:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
hexagon:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
i*86:Linux:*:*)
- LIBC=gnu
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #ifdef __dietlibc__
- LIBC=dietlibc
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
- echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
exit ;;
ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ k1om:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
m32r*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
mips:Linux:*:* | mips64:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
+ eval "$set_cc_for_build"
+ sed 's/^ //' << EOF > "$dummy.c"
#undef CPU
#undef ${UNAME_MACHINE}
#undef ${UNAME_MACHINE}el
@@ -949,55 +986,74 @@ EOF
#endif
#endif
EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU'`"
+ test "x$CPU" != x && { echo "$CPU-unknown-linux-$LIBC"; exit; }
;;
- or32:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ mips64el:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ openrisc*:Linux:*:*)
+ echo or1k-unknown-linux-"$LIBC"
+ exit ;;
+ or32:Linux:*:* | or1k*:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
padre:Linux:*:*)
- echo sparc-unknown-linux-gnu
+ echo sparc-unknown-linux-"$LIBC"
exit ;;
parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
+ echo hppa64-unknown-linux-"$LIBC"
exit ;;
parisc:Linux:*:* | hppa:Linux:*:*)
# Look for CPU level
case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
+ PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;;
+ PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;;
+ *) echo hppa-unknown-linux-"$LIBC" ;;
esac
exit ;;
ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
+ echo powerpc64-unknown-linux-"$LIBC"
exit ;;
ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
+ echo powerpc-unknown-linux-"$LIBC"
+ exit ;;
+ ppc64le:Linux:*:*)
+ echo powerpc64le-unknown-linux-"$LIBC"
+ exit ;;
+ ppcle:Linux:*:*)
+ echo powerpcle-unknown-linux-"$LIBC"
+ exit ;;
+ riscv32:Linux:*:* | riscv64:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
+ echo "$UNAME_MACHINE"-ibm-linux-"$LIBC"
exit ;;
sh64*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
tile*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
vax:Linux:*:*)
- echo ${UNAME_MACHINE}-dec-linux-gnu
+ echo "$UNAME_MACHINE"-dec-linux-"$LIBC"
exit ;;
x86_64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ if objdump -f /bin/sh | grep -q elf32-x86-64; then
+ echo "$UNAME_MACHINE"-pc-linux-"$LIBC"x32
+ else
+ echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
+ fi
exit ;;
xtensa*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
i*86:DYNIX/ptx:4*:*)
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
@@ -1011,34 +1067,34 @@ EOF
# I am not positive that other SVR4 systems won't match this,
# I just have to hope. -- rms.
# Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION"
exit ;;
i*86:OS/2:*:*)
# If we were able to find `uname', then EMX Unix compatibility
# is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
+ echo "$UNAME_MACHINE"-pc-os2-emx
exit ;;
i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
+ echo "$UNAME_MACHINE"-unknown-stop
exit ;;
i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
+ echo "$UNAME_MACHINE"-unknown-atheos
exit ;;
i*86:syllable:*:*)
- echo ${UNAME_MACHINE}-pc-syllable
+ echo "$UNAME_MACHINE"-pc-syllable
exit ;;
i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
+ echo i386-unknown-lynxos"$UNAME_RELEASE"
exit ;;
i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ echo "$UNAME_MACHINE"-pc-msdosdjgpp
exit ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ i*86:*:4.*:*)
+ UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'`
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL"
else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL"
fi
exit ;;
i*86:*:5:[678]*)
@@ -1048,12 +1104,12 @@ EOF
*Pentium) UNAME_MACHINE=i586 ;;
*Pent*|*Celeron) UNAME_MACHINE=i686 ;;
esac
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}{$UNAME_VERSION}"
exit ;;
i*86:*:3.2:*)
if test -f /usr/options/cb.name; then
UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ echo "$UNAME_MACHINE"-pc-isc"$UNAME_REL"
elif /bin/uname -X 2>/dev/null >/dev/null ; then
UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
@@ -1063,9 +1119,9 @@ EOF
&& UNAME_MACHINE=i686
(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
&& UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL"
else
- echo ${UNAME_MACHINE}-pc-sysv32
+ echo "$UNAME_MACHINE"-pc-sysv32
fi
exit ;;
pc:*:*:*)
@@ -1073,7 +1129,7 @@ EOF
# uname -m prints for DJGPP always 'pc', but it prints nothing about
# the processor, so we play safe by assuming i586.
# Note: whatever this is, it MUST be the same as what config.sub
- # prints for the "djgpp" host, or else GDB configury will decide that
+ # prints for the "djgpp" host, or else GDB configure will decide that
# this is a cross-build.
echo i586-pc-msdosdjgpp
exit ;;
@@ -1085,9 +1141,9 @@ EOF
exit ;;
i860:*:4.*:*) # i860-SVR4
if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4
else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ echo i860-unknown-sysv"$UNAME_RELEASE" # Unknown i860-SVR4
fi
exit ;;
mini*:CTIX:SYS*5:*)
@@ -1107,9 +1163,9 @@ EOF
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& { echo i486-ncr-sysv4; exit; } ;;
@@ -1118,28 +1174,28 @@ EOF
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
+ echo m68k-unknown-lynxos"$UNAME_RELEASE"
exit ;;
mc68030:UNIX_System_V:4.*:*)
echo m68k-atari-sysv4
exit ;;
TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
+ echo sparc-unknown-lynxos"$UNAME_RELEASE"
exit ;;
rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ echo rs6000-unknown-lynxos"$UNAME_RELEASE"
exit ;;
PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
+ echo powerpc-unknown-lynxos"$UNAME_RELEASE"
exit ;;
SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
+ echo mips-dde-sysv"$UNAME_RELEASE"
exit ;;
RM*:ReliantUNIX-*:*:*)
echo mips-sni-sysv4
@@ -1150,7 +1206,7 @@ EOF
*:SINIX-*:*:*)
if uname -p 2>/dev/null >/dev/null ; then
UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
+ echo "$UNAME_MACHINE"-sni-sysv4
else
echo ns32k-sni-sysv
fi
@@ -1170,23 +1226,23 @@ EOF
exit ;;
i*86:VOS:*:*)
# From Paul.Green@stratus.com.
- echo ${UNAME_MACHINE}-stratus-vos
+ echo "$UNAME_MACHINE"-stratus-vos
exit ;;
*:VOS:*:*)
# From Paul.Green@stratus.com.
echo hppa1.1-stratus-vos
exit ;;
mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
+ echo m68k-apple-aux"$UNAME_RELEASE"
exit ;;
news*:NEWS-OS:6*:*)
echo mips-sony-newsos6
exit ;;
R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
+ echo mips-nec-sysv"$UNAME_RELEASE"
else
- echo mips-unknown-sysv${UNAME_RELEASE}
+ echo mips-unknown-sysv"$UNAME_RELEASE"
fi
exit ;;
BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
@@ -1201,66 +1257,97 @@ EOF
BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
echo i586-pc-haiku
exit ;;
+ x86_64:Haiku:*:*)
+ echo x86_64-unknown-haiku
+ exit ;;
SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
+ echo sx4-nec-superux"$UNAME_RELEASE"
exit ;;
SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
+ echo sx5-nec-superux"$UNAME_RELEASE"
exit ;;
SX-6:SUPER-UX:*:*)
- echo sx6-nec-superux${UNAME_RELEASE}
+ echo sx6-nec-superux"$UNAME_RELEASE"
exit ;;
SX-7:SUPER-UX:*:*)
- echo sx7-nec-superux${UNAME_RELEASE}
+ echo sx7-nec-superux"$UNAME_RELEASE"
exit ;;
SX-8:SUPER-UX:*:*)
- echo sx8-nec-superux${UNAME_RELEASE}
+ echo sx8-nec-superux"$UNAME_RELEASE"
exit ;;
SX-8R:SUPER-UX:*:*)
- echo sx8r-nec-superux${UNAME_RELEASE}
+ echo sx8r-nec-superux"$UNAME_RELEASE"
+ exit ;;
+ SX-ACE:SUPER-UX:*:*)
+ echo sxace-nec-superux"$UNAME_RELEASE"
exit ;;
Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ echo powerpc-apple-rhapsody"$UNAME_RELEASE"
exit ;;
*:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE"
exit ;;
*:Darwin:*:*)
UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
- case $UNAME_PROCESSOR in
- i386)
- eval $set_cc_for_build
- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
- if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
- grep IS_64BIT_ARCH >/dev/null
- then
- UNAME_PROCESSOR="x86_64"
- fi
- fi ;;
- unknown) UNAME_PROCESSOR=powerpc ;;
- esac
- echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ eval "$set_cc_for_build"
+ if test "$UNAME_PROCESSOR" = unknown ; then
+ UNAME_PROCESSOR=powerpc
+ fi
+ if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then
+ if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ case $UNAME_PROCESSOR in
+ i386) UNAME_PROCESSOR=x86_64 ;;
+ powerpc) UNAME_PROCESSOR=powerpc64 ;;
+ esac
+ fi
+ # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
+ if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
+ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_PPC >/dev/null
+ then
+ UNAME_PROCESSOR=powerpc
+ fi
+ fi
+ elif test "$UNAME_PROCESSOR" = i386 ; then
+ # Avoid executing cc on OS X 10.9, as it ships with a stub
+ # that puts up a graphical alert prompting to install
+ # developer tools. Any system running Mac OS X 10.7 or
+ # later (Darwin 11 and later) is required to have a 64-bit
+ # processor. This is not true of the ARM version of Darwin
+ # that Apple uses in portable devices.
+ UNAME_PROCESSOR=x86_64
+ fi
+ echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE"
exit ;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
+ if test "$UNAME_PROCESSOR" = x86; then
UNAME_PROCESSOR=i386
UNAME_MACHINE=pc
fi
- echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE"
exit ;;
*:QNX:*:4*)
echo i386-pc-qnx
exit ;;
- NEO-?:NONSTOP_KERNEL:*:*)
- echo neo-tandem-nsk${UNAME_RELEASE}
+ NEO-*:NONSTOP_KERNEL:*:*)
+ echo neo-tandem-nsk"$UNAME_RELEASE"
+ exit ;;
+ NSE-*:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk"$UNAME_RELEASE"
exit ;;
- NSE-?:NONSTOP_KERNEL:*:*)
- echo nse-tandem-nsk${UNAME_RELEASE}
+ NSR-*:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk"$UNAME_RELEASE"
exit ;;
- NSR-?:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
+ NSV-*:NONSTOP_KERNEL:*:*)
+ echo nsv-tandem-nsk"$UNAME_RELEASE"
+ exit ;;
+ NSX-*:NONSTOP_KERNEL:*:*)
+ echo nsx-tandem-nsk"$UNAME_RELEASE"
exit ;;
*:NonStop-UX:*:*)
echo mips-compaq-nonstopux
@@ -1269,18 +1356,18 @@ EOF
echo bs2000-siemens-sysv
exit ;;
DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE"
exit ;;
*:Plan9:*:*)
# "uname -m" is not consistent, so use $cputype instead. 386
# is converted to i386 for consistency with other x86
# operating systems.
- if test "$cputype" = "386"; then
+ if test "$cputype" = 386; then
UNAME_MACHINE=i386
else
UNAME_MACHINE="$cputype"
fi
- echo ${UNAME_MACHINE}-unknown-plan9
+ echo "$UNAME_MACHINE"-unknown-plan9
exit ;;
*:TOPS-10:*:*)
echo pdp10-unknown-tops10
@@ -1301,14 +1388,14 @@ EOF
echo pdp10-unknown-its
exit ;;
SEI:*:*:SEIUX)
- echo mips-sei-seiux${UNAME_RELEASE}
+ echo mips-sei-seiux"$UNAME_RELEASE"
exit ;;
*:DragonFly:*:*)
- echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
exit ;;
*:*VMS:*:*)
UNAME_MACHINE=`(uname -p) 2>/dev/null`
- case "${UNAME_MACHINE}" in
+ case "$UNAME_MACHINE" in
A*) echo alpha-dec-vms ; exit ;;
I*) echo ia64-dec-vms ; exit ;;
V*) echo vax-dec-vms ; exit ;;
@@ -1317,185 +1404,48 @@ EOF
echo i386-pc-xenix
exit ;;
i*86:skyos:*:*)
- echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`"
exit ;;
i*86:rdos:*:*)
- echo ${UNAME_MACHINE}-pc-rdos
+ echo "$UNAME_MACHINE"-pc-rdos
exit ;;
i*86:AROS:*:*)
- echo ${UNAME_MACHINE}-pc-aros
+ echo "$UNAME_MACHINE"-pc-aros
exit ;;
x86_64:VMkernel:*:*)
- echo ${UNAME_MACHINE}-unknown-esx
+ echo "$UNAME_MACHINE"-unknown-esx
+ exit ;;
+ amd64:Isilon\ OneFS:*:*)
+ echo x86_64-unknown-onefs
exit ;;
esac
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix\n"); exit (0);
-#endif
+echo "$0: unable to guess system type" >&2
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
+case "$UNAME_MACHINE:$UNAME_SYSTEM" in
+ mips:Linux | mips64:Linux)
+ # If we got here on MIPS GNU/Linux, output extra information.
+ cat >&2 <<EOF
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
+NOTE: MIPS GNU/Linux systems require a C compiler to fully recognize
+the system type. Please install a C compiler and try again.
EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- c34*)
- echo c34-convex-bsd
- exit ;;
- c38*)
- echo c38-convex-bsd
- exit ;;
- c4*)
- echo c4-convex-bsd
- exit ;;
- esac
-fi
+ ;;
+esac
cat >&2 <<EOF
-$0: unable to guess system type
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
+This script (version $timestamp), has failed to recognize the
+operating system you are using. If your script is old, overwrite *all*
+copies of config.guess and config.sub with the latest versions from:
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+ https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
and
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+ https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
+If $0 has already been updated, send the following data and any
+information you think might be pertinent to config-patches@gnu.org to
+provide the necessary information to handle your system.
config.guess timestamp = $timestamp
@@ -1514,16 +1464,16 @@ hostinfo = `(hostinfo) 2>/dev/null`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
+UNAME_MACHINE = "$UNAME_MACHINE"
+UNAME_RELEASE = "$UNAME_RELEASE"
+UNAME_SYSTEM = "$UNAME_SYSTEM"
+UNAME_VERSION = "$UNAME_VERSION"
EOF
exit 1
# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'write-file-functions 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
diff --git a/config.h.in b/config.h.in
index 53377c3..07b9873 100644
--- a/config.h.in
+++ b/config.h.in
@@ -12,6 +12,14 @@
/* Define to 1 if using bsd_auth(3) authentication */
#undef HAVE_BSDAUTH
+/* Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the
+ CoreFoundation framework. */
+#undef HAVE_CFLOCALECOPYCURRENT
+
+/* Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in
+ the CoreFoundation framework. */
+#undef HAVE_CFPREFERENCESCOPYAPPVALUE
+
/* Define to 1 if you have the `clearenv' function. */
#undef HAVE_CLEARENV
@@ -138,16 +146,12 @@
/* Define if XF86VMODE Gamma Ramp is available */
#undef HAVE_XF86VMODE_GAMMA_RAMP
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
- */
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
#undef LT_OBJDIR
/* Define if screen locking support is disabled */
#undef NO_LOCKING
-/* Define to 1 if your C compiler doesn't accept -c and -o together. */
-#undef NO_MINUS_C_MINUS_O
-
/* Name of package */
#undef PACKAGE
diff --git a/config.sub b/config.sub
index c894da4..1d8e98b 100755
--- a/config.sub
+++ b/config.sub
@@ -1,36 +1,31 @@
#! /bin/sh
# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
+# Copyright 1992-2018 Free Software Foundation, Inc.
-timestamp='2012-02-10'
+timestamp='2018-02-22'
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, see <https://www.gnu.org/licenses/>.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# the same distribution terms that you use for the rest of that
+# program. This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted GNU ChangeLog entry.
+# Please send patches to <config-patches@gnu.org>.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
@@ -38,7 +33,7 @@ timestamp='2012-02-10'
# Otherwise, we print the canonical config type on stdout and succeed.
# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
@@ -58,12 +53,11 @@ timestamp='2012-02-10'
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
+Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
Canonicalize a configuration name.
-Operation modes:
+Options:
-h, --help print this help, then exit
-t, --time-stamp print date of last modification, then exit
-v, --version print version number, then exit
@@ -73,9 +67,7 @@ Report bugs and patches to <config-patches@gnu.org>."
version="\
GNU config.sub ($timestamp)
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
+Copyright 1992-2018 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -102,7 +94,7 @@ while test $# -gt 0 ; do
*local*)
# First pass through any local machine types.
- echo $1
+ echo "$1"
exit ;;
* )
@@ -120,24 +112,24 @@ esac
# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+maybe_os=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
- linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
- knetbsd*-gnu* | netbsd*-gnu* | \
- kopensolaris*-gnu* | \
+ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \
+ kopensolaris*-gnu* | cloudabi*-eabi* | \
storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
android-linux)
os=-linux-android
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+ basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
;;
*)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
+ basic_machine=`echo "$1" | sed 's/-[^-]*$//'`
+ if [ "$basic_machine" != "$1" ]
+ then os=`echo "$1" | sed 's/.*-/-/'`
else os=; fi
;;
esac
@@ -156,7 +148,7 @@ case $os in
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis | -knuth | -cray | -microblaze)
+ -apple | -axis | -knuth | -cray | -microblaze*)
os=
basic_machine=$1
;;
@@ -186,53 +178,56 @@ case $os in
;;
-sco6)
os=-sco5v6
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-sco5)
os=-sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-sco4)
os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2.[4-9]*)
os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2v[4-9]*)
# Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-sco5v6*)
# Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-sco*)
os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-udk*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-isc)
os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-clix*)
basic_machine=clipper-intergraph
;;
-isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*178)
+ os=-lynxos178
+ ;;
+ -lynx*5)
+ os=-lynxos5
;;
-lynx*)
os=-lynxos
;;
-ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-sequent/'`
;;
-psos*)
os=-psos
@@ -253,21 +248,25 @@ case $basic_machine in
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| am33_2.0 \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
- | be32 | be64 \
+ | arc | arceb \
+ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+ | avr | avr32 \
+ | ba \
+ | be32 | be64 \
| bfin \
- | c4x | clipper \
+ | c4x | c8051 | clipper \
| d10v | d30v | dlx | dsp16xx \
- | epiphany \
- | fido | fr30 | frv \
+ | e2k | epiphany \
+ | fido | fr30 | frv | ft32 \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| hexagon \
- | i370 | i860 | i960 | ia64 \
+ | i370 | i860 | i960 | ia16 | ia64 \
| ip2k | iq2000 \
+ | k1om \
| le32 | le64 \
| lm32 \
| m32c | m32r | m32rle | m68000 | m68k | m88k \
- | maxq | mb | microblaze | mcore | mep | metag \
+ | maxq | mb | microblaze | microblazeel | mcore | mep | metag \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
@@ -281,26 +280,30 @@ case $basic_machine in
| mips64vr5900 | mips64vr5900el \
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
+ | mipsisa32r6 | mipsisa32r6el \
| mipsisa64 | mipsisa64el \
| mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64r6 | mipsisa64r6el \
| mipsisa64sb1 | mipsisa64sb1el \
| mipsisa64sr71k | mipsisa64sr71kel \
+ | mipsr5900 | mipsr5900el \
| mipstx39 | mipstx39el \
| mn10200 | mn10300 \
| moxie \
| mt \
| msp430 \
| nds32 | nds32le | nds32be \
- | nios | nios2 \
+ | nios | nios2 | nios2eb | nios2el \
| ns16k | ns32k \
- | open8 \
- | or32 \
- | pdp10 | pdp11 | pj | pjl \
+ | open8 | or1k | or1knd | or32 \
+ | pdp10 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle \
+ | pru \
| pyramid \
+ | riscv32 | riscv64 \
| rl78 | rx \
| score \
- | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
@@ -308,7 +311,8 @@ case $basic_machine in
| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
| ubicom32 \
| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
- | we32k \
+ | visium \
+ | wasm32 \
| x86 | xc16x | xstormy16 | xtensa \
| z8k | z80)
basic_machine=$basic_machine-unknown
@@ -322,11 +326,14 @@ case $basic_machine in
c6x)
basic_machine=tic6x-unknown
;;
- m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
+ leon|leon[3-9])
+ basic_machine=sparc-$basic_machine
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
basic_machine=$basic_machine-unknown
os=-none
;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65)
;;
ms1)
basic_machine=mt-unknown
@@ -355,7 +362,7 @@ case $basic_machine in
;;
# Object if more than one company name word.
*-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2
exit 1
;;
# Recognize the basic CPU types with company name.
@@ -364,26 +371,29 @@ case $basic_machine in
| aarch64-* | aarch64_be-* \
| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
- | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* | avr32-* \
+ | ba-* \
| be32-* | be64-* \
| bfin-* | bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c4x-* \
- | clipper-* | craynv-* | cydra-* \
+ | c8051-* | clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
- | elxsi-* \
+ | e2k-* | elxsi-* \
| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
| hexagon-* \
- | i*86-* | i860-* | i960-* | ia64-* \
+ | i*86-* | i860-* | i960-* | ia16-* | ia64-* \
| ip2k-* | iq2000-* \
+ | k1om-* \
| le32-* | le64-* \
| lm32-* \
| m32c-* | m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+ | microblaze-* | microblazeel-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| mips16-* \
| mips64-* | mips64el-* \
@@ -397,28 +407,34 @@ case $basic_machine in
| mips64vr5900-* | mips64vr5900el-* \
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa32r6-* | mipsisa32r6el-* \
| mipsisa64-* | mipsisa64el-* \
| mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64r6-* | mipsisa64r6el-* \
| mipsisa64sb1-* | mipsisa64sb1el-* \
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipsr5900-* | mipsr5900el-* \
| mipstx39-* | mipstx39el-* \
| mmix-* \
| mt-* \
| msp430-* \
| nds32-* | nds32le-* | nds32be-* \
- | nios-* | nios2-* \
+ | nios-* | nios2-* | nios2eb-* | nios2el-* \
| none-* | np1-* | ns16k-* | ns32k-* \
| open8-* \
+ | or1k*-* \
| orion-* \
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+ | pru-* \
| pyramid-* \
+ | riscv32-* | riscv64-* \
| rl78-* | romp-* | rs6000-* | rx-* \
| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
| sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \
| tahoe-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
| tile*-* \
@@ -426,6 +442,8 @@ case $basic_machine in
| ubicom32-* \
| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
| vax-* \
+ | visium-* \
+ | wasm32-* \
| we32k-* \
| x86-* | x86_64-* | xc16x-* | xps100-* \
| xstormy16-* | xtensa*-* \
@@ -439,7 +457,7 @@ case $basic_machine in
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
386bsd)
- basic_machine=i386-unknown
+ basic_machine=i386-pc
os=-bsd
;;
3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
@@ -473,7 +491,7 @@ case $basic_machine in
basic_machine=x86_64-pc
;;
amd64-*)
- basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=x86_64-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
amdahl)
basic_machine=580-amdahl
@@ -502,6 +520,9 @@ case $basic_machine in
basic_machine=i386-pc
os=-aros
;;
+ asmjs)
+ basic_machine=asmjs-unknown
+ ;;
aux)
basic_machine=m68k-apple
os=-aux
@@ -515,7 +536,7 @@ case $basic_machine in
os=-linux
;;
blackfin-*)
- basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=bfin-`echo "$basic_machine" | sed 's/^[^-]*-//'`
os=-linux
;;
bluegene*)
@@ -523,13 +544,13 @@ case $basic_machine in
os=-cnk
;;
c54x-*)
- basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=tic54x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
c55x-*)
- basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=tic55x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
c6x-*)
- basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=tic6x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
c90)
basic_machine=c90-cray
@@ -618,10 +639,18 @@ case $basic_machine in
basic_machine=rs6000-bull
os=-bosx
;;
- dpx2* | dpx2*-bull)
+ dpx2*)
basic_machine=m68k-bull
os=-sysv3
;;
+ e500v[12])
+ basic_machine=powerpc-unknown
+ os=$os"spe"
+ ;;
+ e500v[12]-*)
+ basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ os=$os"spe"
+ ;;
ebmon29k)
basic_machine=a29k-amd
os=-ebmon
@@ -711,9 +740,6 @@ case $basic_machine in
hp9k8[0-9][0-9] | hp8[0-9][0-9])
basic_machine=hppa1.0-hp
;;
- hppa-next)
- os=-nextstep3
- ;;
hppaosf)
basic_machine=hppa1.1-hp
os=-osf
@@ -726,26 +752,26 @@ case $basic_machine in
basic_machine=i370-ibm
;;
i*86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
os=-sysv32
;;
i*86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
os=-sysv4
;;
i*86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
os=-sysv
;;
i*86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
os=-solaris2
;;
i386mach)
basic_machine=i386-mach
os=-mach
;;
- i386-vsta | vsta)
+ vsta)
basic_machine=i386-unknown
os=-vsta
;;
@@ -763,17 +789,17 @@ case $basic_machine in
basic_machine=m68k-isi
os=-sysv
;;
+ leon-*|leon[3-9]-*)
+ basic_machine=sparc-`echo "$basic_machine" | sed 's/-.*//'`
+ ;;
m68knommu)
basic_machine=m68k-unknown
os=-linux
;;
m68knommu-*)
- basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=m68k-`echo "$basic_machine" | sed 's/^[^-]*-//'`
os=-linux
;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
magnum | m3230)
basic_machine=mips-mips
os=-sysv
@@ -782,11 +808,15 @@ case $basic_machine in
basic_machine=ns32k-utek
os=-sysv
;;
- microblaze)
+ microblaze*)
basic_machine=microblaze-xilinx
;;
+ mingw64)
+ basic_machine=x86_64-pc
+ os=-mingw64
+ ;;
mingw32)
- basic_machine=i386-pc
+ basic_machine=i686-pc
os=-mingw32
;;
mingw32ce)
@@ -801,10 +831,10 @@ case $basic_machine in
os=-mint
;;
mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`
;;
mips3*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`-unknown
;;
monitor)
basic_machine=m68k-rom68k
@@ -814,15 +844,19 @@ case $basic_machine in
basic_machine=powerpc-unknown
os=-morphos
;;
+ moxiebox)
+ basic_machine=moxie-unknown
+ os=-moxiebox
+ ;;
msdos)
basic_machine=i386-pc
os=-msdos
;;
ms1-*)
- basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ basic_machine=`echo "$basic_machine" | sed -e 's/ms1-/mt-/'`
;;
msys)
- basic_machine=i386-pc
+ basic_machine=i686-pc
os=-msys
;;
mvs)
@@ -861,7 +895,7 @@ case $basic_machine in
basic_machine=v70-nec
os=-sysv
;;
- next | m*-next )
+ next | m*-next)
basic_machine=m68k-next
case $os in
-nextstep* )
@@ -906,6 +940,12 @@ case $basic_machine in
nsr-tandem)
basic_machine=nsr-tandem
;;
+ nsv-tandem)
+ basic_machine=nsv-tandem
+ ;;
+ nsx-tandem)
+ basic_machine=nsx-tandem
+ ;;
op50n-* | op60c-*)
basic_machine=hppa1.1-oki
os=-proelf
@@ -938,7 +978,7 @@ case $basic_machine in
os=-linux
;;
parisc-*)
- basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=hppa-`echo "$basic_machine" | sed 's/^[^-]*-//'`
os=-linux
;;
pbd)
@@ -954,7 +994,7 @@ case $basic_machine in
basic_machine=i386-pc
;;
pc98-*)
- basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=i386-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
pentium | p5 | k5 | k6 | nexgen | viac3)
basic_machine=i586-pc
@@ -969,16 +1009,16 @@ case $basic_machine in
basic_machine=i786-pc
;;
pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=i586-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
pentiumpro-* | p6-* | 6x86-* | athlon-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
pentium4-*)
- basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=i786-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
pn)
basic_machine=pn-gould
@@ -988,23 +1028,23 @@ case $basic_machine in
ppc | ppcbe) basic_machine=powerpc-unknown
;;
ppc-* | ppcbe-*)
- basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
+ ppcle | powerpclittle)
basic_machine=powerpcle-unknown
;;
ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=powerpcle-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
ppc64) basic_machine=powerpc64-unknown
;;
- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ppc64-*) basic_machine=powerpc64-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ ppc64le | powerpc64little)
basic_machine=powerpc64le-unknown
;;
ppc64le-* | powerpc64little-*)
- basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=powerpc64le-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
ps2)
basic_machine=i386-ibm
@@ -1013,7 +1053,11 @@ case $basic_machine in
basic_machine=i586-unknown
os=-pw32
;;
- rdos)
+ rdos | rdos64)
+ basic_machine=x86_64-pc
+ os=-rdos
+ ;;
+ rdos32)
basic_machine=i386-pc
os=-rdos
;;
@@ -1054,17 +1098,10 @@ case $basic_machine in
sequent)
basic_machine=i386-sequent
;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
sh5el)
basic_machine=sh5le-unknown
;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparclite-wrs | simso-wrs)
+ simso-wrs)
basic_machine=sparclite-wrs
os=-vxworks
;;
@@ -1083,7 +1120,7 @@ case $basic_machine in
os=-sysv4
;;
strongarm-* | thumb-*)
- basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=arm-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
sun2)
basic_machine=m68000-sun
@@ -1205,6 +1242,9 @@ case $basic_machine in
basic_machine=hppa1.1-winbond
os=-proelf
;;
+ x64)
+ basic_machine=x86_64-pc
+ ;;
xbox)
basic_machine=i686-pc
os=-mingw32
@@ -1213,20 +1253,12 @@ case $basic_machine in
basic_machine=xps100-honeywell
;;
xscale-* | xscalee[bl]-*)
- basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+ basic_machine=`echo "$basic_machine" | sed 's/^xscale/arm/'`
;;
ymp)
basic_machine=ymp-cray
os=-unicos
;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
- ;;
- z80-*-coff)
- basic_machine=z80-unknown
- os=-sim
- ;;
none)
basic_machine=none-none
os=-none
@@ -1255,10 +1287,6 @@ case $basic_machine in
vax)
basic_machine=vax-dec
;;
- pdp10)
- # there are many clones, so DEC is not a safe bet
- basic_machine=pdp10-unknown
- ;;
pdp11)
basic_machine=pdp11-dec
;;
@@ -1268,9 +1296,6 @@ case $basic_machine in
sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
basic_machine=sh-unknown
;;
- sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
- basic_machine=sparc-sun
- ;;
cydra)
basic_machine=cydra-cydrome
;;
@@ -1290,7 +1315,7 @@ case $basic_machine in
# Make sure to match an already-canonicalized machine name.
;;
*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2
exit 1
;;
esac
@@ -1298,10 +1323,10 @@ esac
# Here we canonicalize certain aliases for manufacturers.
case $basic_machine in
*-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ basic_machine=`echo "$basic_machine" | sed 's/digital.*/dec/'`
;;
*-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ basic_machine=`echo "$basic_machine" | sed 's/commodore.*/cbm/'`
;;
*)
;;
@@ -1312,8 +1337,8 @@ esac
if [ x"$os" != x"" ]
then
case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
+ # First match some system type aliases that might get confused
+ # with valid system types.
# -solaris* is a basic system type, with this one exception.
-auroraux)
os=-auroraux
@@ -1324,45 +1349,48 @@ case $os in
-solaris)
os=-solaris2
;;
- -svr4*)
- os=-sysv4
- ;;
-unixware*)
os=-sysv4.2uw
;;
-gnu/linux*)
os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
;;
- # First accept the basic system types.
+ # es1800 is here to avoid being matched by es* (a different OS)
+ -es1800*)
+ os=-ose
+ ;;
+ # Now accept the basic system types.
# The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
+ # Each alternative MUST end in a * to match a version number.
# -sysv* is not here because it comes later, after sysvr4.
-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
| -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
| -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
- | -sym* | -kopensolaris* \
+ | -sym* | -kopensolaris* | -plan9* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* | -aros* \
+ | -aos* | -aros* | -cloudabi* | -sortix* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
- | -openbsd* | -solidbsd* \
+ | -hiux* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \
| -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
| -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* | -cegcc* \
+ | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \
| -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -linux-android* \
- | -linux-newlib* | -linux-uclibc* \
- | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+ | -linux-newlib* | -linux-musl* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -morphos* | -superux* | -rtmk* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \
+ | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox* | -bme* \
+ | -midnightbsd*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@@ -1379,12 +1407,12 @@ case $os in
-nto*)
os=`echo $os | sed -e 's|nto|nto-qnx|'`
;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+ -sim | -xray | -os68k* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* \
| -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
;;
-mac*)
- os=`echo $os | sed -e 's|mac|macos|'`
+ os=`echo "$os" | sed -e 's|mac|macos|'`
;;
-linux-dietlibc)
os=-linux-dietlibc
@@ -1393,10 +1421,10 @@ case $os in
os=`echo $os | sed -e 's|linux|linux-gnu|'`
;;
-sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ os=`echo "$os" | sed -e 's|sunos5|solaris2|'`
;;
-sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ os=`echo "$os" | sed -e 's|sunos6|solaris3|'`
;;
-opened*)
os=-openedition
@@ -1407,12 +1435,6 @@ case $os in
-wince*)
os=-wince
;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
-utek*)
os=-bsd
;;
@@ -1437,7 +1459,7 @@ case $os in
-nova*)
os=-rtmk-nova
;;
- -ns2 )
+ -ns2)
os=-nextstep2
;;
-nsk*)
@@ -1459,7 +1481,7 @@ case $os in
-oss*)
os=-sysv3
;;
- -svr4)
+ -svr4*)
os=-sysv4
;;
-svr3)
@@ -1474,35 +1496,38 @@ case $os in
-ose*)
os=-ose
;;
- -es1800*)
- os=-ose
- ;;
- -xenix)
- os=-xenix
- ;;
-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
os=-mint
;;
- -aros*)
- os=-aros
- ;;
- -kaos*)
- os=-kaos
- ;;
-zvmoe)
os=-zvmoe
;;
-dicos*)
os=-dicos
;;
+ -pikeos*)
+ # Until real need of OS specific support for
+ # particular features comes up, bare metal
+ # configurations are quite functional.
+ case $basic_machine in
+ arm*)
+ os=-eabi
+ ;;
+ *)
+ os=-elf
+ ;;
+ esac
+ ;;
-nacl*)
;;
+ -ios)
+ ;;
-none)
;;
*)
# Get rid of the `-' at the beginning of $os.
os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2
exit 1
;;
esac
@@ -1537,6 +1562,12 @@ case $basic_machine in
c4x-* | tic4x-*)
os=-coff
;;
+ c8051-*)
+ os=-elf
+ ;;
+ hexagon-*)
+ os=-elf
+ ;;
tic54x-*)
os=-coff
;;
@@ -1586,12 +1617,12 @@ case $basic_machine in
sparc-* | *-sun)
os=-sunos4.1.1
;;
+ pru-*)
+ os=-elf
+ ;;
*-be)
os=-beos
;;
- *-haiku)
- os=-haiku
- ;;
*-ibm)
os=-aix
;;
@@ -1631,7 +1662,7 @@ case $basic_machine in
m88k-omron*)
os=-luna
;;
- *-next )
+ *-next)
os=-nextstep
;;
*-sequent)
@@ -1646,9 +1677,6 @@ case $basic_machine in
i370-*)
os=-mvs
;;
- *-next)
- os=-nextstep3
- ;;
*-gould)
os=-sysv
;;
@@ -1758,15 +1786,15 @@ case $basic_machine in
vendor=stratus
;;
esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ basic_machine=`echo "$basic_machine" | sed "s/unknown/$vendor/"`
;;
esac
-echo $basic_machine$os
+echo "$basic_machine$os"
exit
# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'write-file-functions 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
diff --git a/configure b/configure
index 22b32c2..a000d7b 100755
--- a/configure
+++ b/configure
@@ -693,10 +693,13 @@ PO_IN_DATADIR_TRUE
INTLLIBS
INSTOBJEXT
GMOFILES
+DATADIRNAME
CATOBJEXT
CATALOGS
MSGFMT_OPTS
+INTL_MACOSX_LIBS
GETTEXT_PACKAGE
+LT_SYS_LIBRARY_PATH
OTOOL64
OTOOL
LIPO
@@ -727,7 +730,6 @@ LIBTOOL
EGREP
GREP
CPP
-DATADIRNAME
am__fastdepCC_FALSE
am__fastdepCC_TRUE
CCDEPMODE
@@ -735,7 +737,6 @@ am__nodep
AMDEPBACKSLASH
AMDEP_FALSE
AMDEP_TRUE
-am__quote
am__include
DEPDIR
OBJEXT
@@ -787,6 +788,9 @@ AM_BACKSLASH
AM_DEFAULT_VERBOSITY
AM_DEFAULT_V
AM_V
+CSCOPE
+ETAGS
+CTAGS
am__untar
am__tar
AMTAR
@@ -829,6 +833,7 @@ infodir
docdir
oldincludedir
includedir
+runstatedir
localstatedir
sharedstatedir
sysconfdir
@@ -847,7 +852,8 @@ PACKAGE_VERSION
PACKAGE_TARNAME
PACKAGE_NAME
PATH_SEPARATOR
-SHELL'
+SHELL
+am__quote'
ac_subst_files=''
ac_user_opts='
enable_option_checking
@@ -859,6 +865,7 @@ enable_shared
enable_static
with_pic
enable_fast_install
+with_aix_soname
with_gnu_ld
with_sysroot
enable_libtool_lock
@@ -887,9 +894,11 @@ LDFLAGS
LIBS
CPPFLAGS
CPP
+LT_SYS_LIBRARY_PATH
PKG_CONFIG
PKG_CONFIG_PATH
PKG_CONFIG_LIBDIR
+GLIB_COMPILE_SCHEMAS
GNOME_SCREENSAVER_CFLAGS
GNOME_SCREENSAVER_LIBS
GNOME_SCREENSAVER_DIALOG_CFLAGS
@@ -943,6 +952,7 @@ datadir='${datarootdir}'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
+runstatedir='${localstatedir}/run'
includedir='${prefix}/include'
oldincludedir='/usr/include'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
@@ -1195,6 +1205,15 @@ do
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
+ -runstatedir | --runstatedir | --runstatedi | --runstated \
+ | --runstate | --runstat | --runsta | --runst | --runs \
+ | --run | --ru | --r)
+ ac_prev=runstatedir ;;
+ -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
+ | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
+ | --run=* | --ru=* | --r=*)
+ runstatedir=$ac_optarg ;;
+
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
@@ -1332,7 +1351,7 @@ fi
for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
datadir sysconfdir sharedstatedir localstatedir includedir \
oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
+ libdir localedir mandir runstatedir
do
eval ac_val=\$$ac_var
# Remove trailing slashes.
@@ -1485,6 +1504,7 @@ Fine tuning of the installation directories:
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
@@ -1562,9 +1582,12 @@ Optional Packages:
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
both]
+ --with-aix-soname=aix|svr4|both
+ shared library versioning (aka "SONAME") variant to
+ provide on AIX, [default=aix].
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
- --with-sysroot=DIR Search for dependent libraries within DIR
- (or the compiler's sysroot if not specified).
+ --with-sysroot[=DIR] Search for dependent libraries within DIR (or the
+ compiler's sysroot if not specified).
--with-x use the X Window System
--with-doc-dir=<dir> directory to install documentation
--with-mit-ext Include support for the MIT-SCREEN-SAVER extension.
@@ -1584,11 +1607,15 @@ Some influential environment variables:
CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CPP C preprocessor
+ LT_SYS_LIBRARY_PATH
+ User-defined run-time library search path.
PKG_CONFIG path to pkg-config utility
PKG_CONFIG_PATH
directories to add to pkg-config's search path
PKG_CONFIG_LIBDIR
path overriding pkg-config's built-in search path
+ GLIB_COMPILE_SCHEMAS
+ value of glib_compile_schemas for gio-2.0, overriding pkg-config
GNOME_SCREENSAVER_CFLAGS
C compiler flags for GNOME_SCREENSAVER, overriding pkg-config
GNOME_SCREENSAVER_LIBS
@@ -1789,73 +1816,6 @@ fi
} # ac_fn_c_try_link
-# ac_fn_c_check_func LINENO FUNC VAR
-# ----------------------------------
-# Tests whether FUNC exists, setting the cache variable VAR accordingly
-ac_fn_c_check_func ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $2 innocuous_$2
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $2 (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $2
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $2 ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$2 || defined __stub___$2
-choke me
-#endif
-
-int
-main ()
-{
-return $2 ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$3=yes"
-else
- eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_func
-
# ac_fn_c_try_cpp LINENO
# ----------------------
# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
@@ -1966,6 +1926,73 @@ $as_echo "$ac_res" >&6; }
} # ac_fn_c_check_header_compile
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
# -------------------------------------------------------
# Tests whether HEADER exists, giving a warning if it cannot be compiled using
@@ -2411,7 +2438,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
-am__api_version='1.12'
+am__api_version='1.16'
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
@@ -2612,27 +2639,22 @@ test "$program_suffix" != NONE &&
ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
+ MISSING="\${SHELL} '$am_aux_dir/missing'"
fi
# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
else
am_missing_run=
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
fi
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -2865,6 +2887,45 @@ else
fi
rmdir .tst 2>/dev/null
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
if test "`cd $srcdir && pwd`" != "`pwd`"; then
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output
# is not polluted with repeated "-I."
@@ -2917,103 +2978,199 @@ MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
mkdir_p='$(MKDIR_P)'
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a ustar tar archive" >&5
-$as_echo_n "checking how to create a ustar tar archive... " >&6; }
-# Loop over all known methods to create a tar archive until one works.
+# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar plaintar pax cpio none'
-_am_tools=${am_cv_prog_tar_ustar-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of '-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- { echo "$as_me:$LINENO: $_am_tar --version" >&5
+
+# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether UID '$am_uid' is supported by ustar format" >&5
+$as_echo_n "checking whether UID '$am_uid' is supported by ustar format... " >&6; }
+ if test $am_uid -le $am_max_uid; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ _am_tools=none
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether GID '$am_gid' is supported by ustar format" >&5
+$as_echo_n "checking whether GID '$am_gid' is supported by ustar format... " >&6; }
+ if test $am_gid -le $am_max_gid; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ _am_tools=none
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a ustar tar archive" >&5
+$as_echo_n "checking how to create a ustar tar archive... " >&6; }
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_ustar-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ { echo "$as_me:$LINENO: $_am_tar --version" >&5
($_am_tar --version) >&5 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && break
- done
- am__tar="$_am_tar --format=ustar -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=ustar -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x ustar -w "$$tardir"'
- am__tar_='pax -L -x ustar -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H ustar -L'
- am__tar_='find "$tardir" -print | cpio -o -H ustar -L'
- am__untar='cpio -i -H ustar -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
+ done
+ am__tar="$_am_tar --format=ustar -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=ustar -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x ustar -w "$$tardir"'
+ am__tar_='pax -L -x ustar -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H ustar -L'
+ am__tar_='find "$tardir" -print | cpio -o -H ustar -L'
+ am__untar='cpio -i -H ustar -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_ustar}" && break
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_ustar}" && break
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- { echo "$as_me:$LINENO: tardir=conftest.dir && eval $am__tar_ >conftest.tar" >&5
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ { echo "$as_me:$LINENO: tardir=conftest.dir && eval $am__tar_ >conftest.tar" >&5
(tardir=conftest.dir && eval $am__tar_ >conftest.tar) >&5 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
- rm -rf conftest.dir
- if test -s conftest.tar; then
- { echo "$as_me:$LINENO: $am__untar <conftest.tar" >&5
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ { echo "$as_me:$LINENO: $am__untar <conftest.tar" >&5
($am__untar <conftest.tar) >&5 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
+ { echo "$as_me:$LINENO: cat conftest.dir/file" >&5
+ (cat conftest.dir/file) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
+ rm -rf conftest.dir
-if ${am_cv_prog_tar_ustar+:} false; then :
+ if ${am_cv_prog_tar_ustar+:} false; then :
$as_echo_n "(cached) " >&6
else
am_cv_prog_tar_ustar=$_am_tool
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_ustar" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_ustar" >&5
$as_echo "$am_cv_prog_tar_ustar" >&6; }
+# Variables for tags utilities; see am/tags.am
+if test -z "$CTAGS"; then
+ CTAGS=ctags
+fi
+
+if test -z "$ETAGS"; then
+ ETAGS=etags
+fi
+
+if test -z "$CSCOPE"; then
+ CSCOPE=cscope
+fi
+
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <https://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
+
# Check whether --enable-silent-rules was given.
if test "${enable_silent_rules+set}" = set; then :
enableval=$enable_silent_rules;
@@ -3095,93 +3252,48 @@ fi
$as_echo "$USE_NLS" >&6; }
-DEPDIR="${am__leading_dot}deps"
-ac_config_commands="$ac_config_commands depfiles"
+case "$am__api_version" in
+ 1.01234)
+ as_fn_error $? "Automake 1.5 or newer is required to use intltool" "$LINENO" 5
+ ;;
+ *)
+ ;;
+esac
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
-$as_echo_n "checking for style of include used by $am_make... " >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
-$as_echo "$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then :
- enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
- am__nodep='_no'
-fi
- if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
+INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.35.0 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`
+INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3`
+INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`
+if test -n "0.35.0"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intltool >= 0.35.0" >&5
+$as_echo_n "checking for intltool >= 0.35.0... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_APPLIED_VERSION found" >&5
+$as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; }
+ test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" ||
+ as_fn_error $? "Your intltool is too old. You need intltool 0.35.0 or later." "$LINENO" 5
fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
+# Extract the first word of "intltool-update", so it can be a program name with args.
+set dummy intltool-update; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
+if ${ac_cv_path_INTLTOOL_UPDATE+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ case $INTLTOOL_UPDATE in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -3189,39 +3301,39 @@ done
done
IFS=$as_save_IFS
+ ;;
+esac
fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
+INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE
+if test -n "$INTLTOOL_UPDATE"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_UPDATE" >&5
+$as_echo "$INTLTOOL_UPDATE" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
+# Extract the first word of "intltool-merge", so it can be a program name with args.
+set dummy intltool-merge; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
+if ${ac_cv_path_INTLTOOL_MERGE+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ case $INTLTOOL_MERGE in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="gcc"
+ ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -3229,52 +3341,39 @@ done
done
IFS=$as_save_IFS
+ ;;
+esac
fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
+INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE
+if test -n "$INTLTOOL_MERGE"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_MERGE" >&5
+$as_echo "$INTLTOOL_MERGE" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
+# Extract the first word of "intltool-extract", so it can be a program name with args.
+set dummy intltool-extract; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
+if ${ac_cv_path_INTLTOOL_EXTRACT+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ case $INTLTOOL_EXTRACT in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
+ ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -3282,142 +3381,183 @@ done
done
IFS=$as_save_IFS
+ ;;
+esac
fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
+INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT
+if test -n "$INTLTOOL_EXTRACT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_EXTRACT" >&5
+$as_echo "$INTLTOOL_EXTRACT" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- fi
+if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then
+ as_fn_error $? "The intltool scripts were not found. Please install intltool." "$LINENO" 5
fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+if test -z "$AM_DEFAULT_VERBOSITY"; then
+ AM_DEFAULT_VERBOSITY=1
fi
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
+INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))'
+INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))'
+INTLTOOL__v_MERGE_0='@echo " ITMRG " $@;'
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+
+INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))'
+intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))'
+intltool__v_merge_options_0='-q'
+
+
+
+
+ INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+ INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+ INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+ INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< $@'
+ INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+ INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+ INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+ INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+ INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then
+ INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< $@'
+else
+ INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.$$RANDOM && mkdir $$_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u $$_it_tmp_dir $< $@ && rmdir $$_it_tmp_dir'
+fi
+ INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+ INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+ INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+ INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+ INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+ INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+ INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check the gettext tools to make sure they are GNU
+# Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
+if ${ac_cv_path_XGETTEXT+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ case $XGETTEXT in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
+ ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -3425,699 +3565,347 @@ done
done
IFS=$as_save_IFS
+ ;;
+esac
fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
+XGETTEXT=$ac_cv_path_XGETTEXT
+if test -n "$XGETTEXT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
+$as_echo "$XGETTEXT" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- test -n "$ac_ct_CC" && break
+# Extract the first word of "msgmerge", so it can be a program name with args.
+set dummy msgmerge; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_MSGMERGE+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MSGMERGE in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
done
+ done
+IFS=$as_save_IFS
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
+ ;;
esac
- CC=$ac_ct_CC
- fi
fi
-
+MSGMERGE=$ac_cv_path_MSGMERGE
+if test -n "$MSGMERGE"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5
+$as_echo "$MSGMERGE" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
- { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compiler $ac_option >&5") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- sed '10a\
-... rest of stderr output deleted ...
- 10q' conftest.err >conftest.er1
- cat conftest.er1 >&5
+# Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_MSGFMT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MSGFMT in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
- rm -f conftest.er1 conftest.err
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
done
+ done
+IFS=$as_save_IFS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+ ;;
+esac
+fi
+MSGFMT=$ac_cv_path_MSGFMT
+if test -n "$MSGFMT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
+$as_echo "$MSGFMT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-ac_rmfiles=
-for ac_file in $ac_files
+# Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_GMSGFMT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $GMSGFMT in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
done
-rm -f $ac_rmfiles
+ done
+IFS=$as_save_IFS
-if { { ac_try="$ac_link_default"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ ;;
esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link_default") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile. We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
+fi
+GMSGFMT=$ac_cv_path_GMSGFMT
+if test -n "$GMSGFMT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
+$as_echo "$GMSGFMT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then
+ as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5
+fi
+xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`"
+mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`"
+mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`"
+if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then
+ as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5
+fi
+
+# Extract the first word of "perl", so it can be a program name with args.
+set dummy perl; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_INTLTOOL_PERL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $INTLTOOL_PERL in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
- * )
- break;;
- esac
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
+ done
+IFS=$as_save_IFS
-else
- ac_file=''
+ ;;
+esac
fi
-if test -z "$ac_file"; then :
+INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL
+if test -n "$INTLTOOL_PERL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_PERL" >&5
+$as_echo "$INTLTOOL_PERL" >&6; }
+else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+fi
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
+
+if test -z "$INTLTOOL_PERL"; then
+ as_fn_error $? "perl not found" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.8.1" >&5
+$as_echo_n "checking for perl >= 5.8.1... " >&6; }
+$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1
+if test $? -ne 0; then
+ as_fn_error $? "perl 5.8.1 is required for intltool" "$LINENO" 5
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
+ IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5
+$as_echo "$IT_PERL_VERSION" >&6; }
+fi
+if test "x" != "xno-xml"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML::Parser" >&5
+$as_echo_n "checking for XML::Parser... " >&6; }
+ if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+ else
+ as_fn_error $? "XML::Parser perl module is required for intltool" "$LINENO" 5
+ fi
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-ac_exeext=$ac_cv_exeext
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
+# Substitute ALL_LINGUAS so we can use it in po/Makefile
+
+
+
+
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5
+$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; }
+cat > confinc.mk << 'END'
+am__doit:
+ @echo this is the am__doit target >confinc.out
+.PHONY: am__doit
+END
+am__include="#"
+am__quote=
+# BSD make does it like this.
+echo '.include "confinc.mk" # ignored' > confmf.BSD
+# Other make implementations (GNU, Solaris 10, AIX) do it like this.
+echo 'include confinc.mk # ignored' > confmf.GNU
+_am_result=no
+for s in GNU BSD; do
+ { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5
+ (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ case $?:`cat confinc.out 2>/dev/null` in #(
+ '0:this is the am__doit target') :
+ case $s in #(
+ BSD) :
+ am__include='.include' am__quote='"' ;; #(
+ *) :
+ am__include='include' am__quote='' ;;
+esac ;; #(
+ *) :
+ ;;
esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- break;;
- * ) break;;
- esac
+ if test "$am__include" != "#"; then
+ _am_result="yes ($s style)"
+ break
+ fi
done
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
+rm -f confinc.* confmf.*
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5
+$as_echo "${_am_result}" >&6; }
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
fi
-rm -f conftest conftest$ac_cv_exeext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdio.h>
-int
-main ()
-{
-FILE *f = fopen ("conftest.out", "w");
- return ferror (f) || fclose (f) != 0;
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files="$ac_clean_files conftest.out"
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
- { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
- if { ac_try='./conftest$ac_cv_exeext'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
- fi
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if ${ac_cv_objext+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_compiler_gnu=yes
-else
- ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
- GCC=yes
-else
- GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-else
- CFLAGS=""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
- $as_echo_n "(cached) " >&6
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
- xno)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC" am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named 'D' -- because '-MD' means "put the output
- # in D".
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
- am__universal=false
- case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
- # Solaris 10 /bin/sh.
- echo '/* dummy */' > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with '-c' and '-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle '-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs.
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # After this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested.
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok '-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
+done
done
+IFS=$as_save_IFS
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
fi
-
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
-
-
-
-case "$am__api_version" in
- 1.01234)
- as_fn_error $? "Automake 1.5 or newer is required to use intltool" "$LINENO" 5
- ;;
- *)
- ;;
-esac
-
-INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.35.0 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`
-INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3`
-INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`
-if test -n "0.35.0"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intltool >= 0.35.0" >&5
-$as_echo_n "checking for intltool >= 0.35.0... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_APPLIED_VERSION found" >&5
-$as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; }
- test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" ||
- as_fn_error $? "Your intltool is too old. You need intltool 0.35.0 or later." "$LINENO" 5
-fi
-
-# Extract the first word of "intltool-update", so it can be a program name with args.
-set dummy intltool-update; ac_word=$2
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_INTLTOOL_UPDATE+:} false; then :
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
- case $INTLTOOL_UPDATE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext"
+ ac_cv_prog_ac_ct_CC="gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -4125,39 +3913,52 @@ done
done
IFS=$as_save_IFS
- ;;
-esac
fi
-INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE
-if test -n "$INTLTOOL_UPDATE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_UPDATE" >&5
-$as_echo "$INTLTOOL_UPDATE" >&6; }
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
-# Extract the first word of "intltool-merge", so it can be a program name with args.
-set dummy intltool-merge; ac_word=$2
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_INTLTOOL_MERGE+:} false; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
- case $INTLTOOL_MERGE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext"
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -4165,39 +3966,44 @@ done
done
IFS=$as_save_IFS
- ;;
-esac
fi
-INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE
-if test -n "$INTLTOOL_MERGE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_MERGE" >&5
-$as_echo "$INTLTOOL_MERGE" >&6; }
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
-# Extract the first word of "intltool-extract", so it can be a program name with args.
-set dummy intltool-extract; ac_word=$2
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_INTLTOOL_EXTRACT+:} false; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
- case $INTLTOOL_EXTRACT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext"
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -4205,439 +4011,811 @@ done
done
IFS=$as_save_IFS
- ;;
-esac
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
fi
-INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT
-if test -n "$INTLTOOL_EXTRACT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_EXTRACT" >&5
-$as_echo "$INTLTOOL_EXTRACT" >&6; }
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
-if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then
- as_fn_error $? "The intltool scripts were not found. Please install intltool." "$LINENO" 5
-fi
-
-if test -z "$AM_DEFAULT_VERBOSITY"; then
- AM_DEFAULT_VERBOSITY=1
fi
-
-
-INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))'
-INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))'
-INTLTOOL__v_MERGE_0='@echo " ITMRG " $@;'
-
-
-
-
-INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))'
-intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))'
-intltool__v_merge_options_0='-q'
-
-
-
-
- INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
- INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
- INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
- INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< $@'
- INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
- INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
- INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
- INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
- INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then
- INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< $@'
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.$$RANDOM && mkdir $$_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u $$_it_tmp_dir $< $@ && rmdir $$_it_tmp_dir'
-fi
- INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
- INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
- INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
- INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
- INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
- INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
- INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@'
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+ test -n "$ac_ct_CC" && break
+done
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+fi
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int
+main ()
+{
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+else
+ ac_file=''
+fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int
+main ()
+{
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
-# Check the gettext tools to make sure they are GNU
-# Extract the first word of "xgettext", so it can be a program name with args.
-set dummy xgettext; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_XGETTEXT+:} false; then :
- $as_echo_n "(cached) " >&6
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
else
- case $XGETTEXT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
- ;;
-esac
fi
-XGETTEXT=$ac_cv_path_XGETTEXT
-if test -n "$XGETTEXT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
-$as_echo "$XGETTEXT" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+ GCC=
fi
-
-
-# Extract the first word of "msgmerge", so it can be a program name with args.
-set dummy msgmerge; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MSGMERGE+:} false; then :
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
$as_echo_n "(cached) " >&6
else
- case $MSGMERGE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
- ;;
-esac
-fi
-MSGMERGE=$ac_cv_path_MSGMERGE
-if test -n "$MSGMERGE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5
-$as_echo "$MSGMERGE" >&6; }
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
-# Extract the first word of "msgfmt", so it can be a program name with args.
-set dummy msgfmt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MSGFMT+:} false; then :
- $as_echo_n "(cached) " >&6
else
- case $MSGFMT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
- ;;
-esac
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
fi
-MSGFMT=$ac_cv_path_MSGFMT
-if test -n "$MSGFMT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
-$as_echo "$MSGFMT" >&6; }
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
fi
-
-
-# Extract the first word of "gmsgfmt", so it can be a program name with args.
-set dummy gmsgfmt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GMSGFMT+:} false; then :
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
$as_echo_n "(cached) " >&6
else
- case $GMSGFMT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
done
- done
-IFS=$as_save_IFS
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
- ;;
-esac
-fi
-GMSGFMT=$ac_cv_path_GMSGFMT
-if test -n "$GMSGFMT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
-$as_echo "$GMSGFMT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then
- as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5
-fi
-xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`"
-mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`"
-mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`"
-if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then
- as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5
fi
-# Extract the first word of "perl", so it can be a program name with args.
-set dummy perl; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_INTLTOOL_PERL+:} false; then :
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
$as_echo_n "(cached) " >&6
else
- case $INTLTOOL_PERL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
- ;;
-esac
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
fi
-INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL
-if test -n "$INTLTOOL_PERL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_PERL" >&5
-$as_echo "$INTLTOOL_PERL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -z "$INTLTOOL_PERL"; then
- as_fn_error $? "perl not found" "$LINENO" 5
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.8.1" >&5
-$as_echo_n "checking for perl >= 5.8.1... " >&6; }
-$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1
-if test $? -ne 0; then
- as_fn_error $? "perl 5.8.1 is required for intltool" "$LINENO" 5
+depcc="$CC" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5
-$as_echo "$IT_PERL_VERSION" >&6; }
-fi
-if test "x" != "xno-xml"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML::Parser" >&5
-$as_echo_n "checking for XML::Parser... " >&6; }
- if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- else
- as_fn_error $? "XML::Parser perl module is required for intltool" "$LINENO" 5
- fi
-fi
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
-# Substitute ALL_LINGUAS so we can use it in po/Makefile
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-# Set DATADIRNAME correctly if it is not set yet
-# (copied from glib-gettext.m4)
-if test -z "$DATADIRNAME"; then
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
-int
-main ()
-{
-extern int _nl_msg_cat_cntr;
- return _nl_msg_cat_cntr
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- DATADIRNAME=share
-else
- case $host in
- *-*-solaris*)
- ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset"
-if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then :
- DATADIRNAME=share
+ cd ..
+ rm -rf conftest.dir
else
- DATADIRNAME=lib
+ am_cv_CC_dependencies_compiler_type=none
fi
- ;;
- *)
- DATADIRNAME=lib
- ;;
- esac
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
@@ -5236,6 +5414,65 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
depcc="$CC" am_compiler_list=
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
@@ -5337,157 +5574,32 @@ else
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-if test "x$CC" != xcc; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5
-$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5
-$as_echo_n "checking whether cc understands -c and -o together... " >&6; }
-fi
-set dummy $CC; ac_cc=`$as_echo "$2" |
- sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-# Make sure it works both with $CC and with simple cc.
-# We do the test twice because some compilers refuse to overwrite an
-# existing .o file with -o, though they will create one.
-ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
-rm -f conftest2.*
-if { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } &&
- test -f conftest2.$ac_objext && { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; };
-then
- eval ac_cv_prog_cc_${ac_cc}_c_o=yes
- if test "x$CC" != xcc; then
- # Test first that cc exists at all.
- if { ac_try='cc -c conftest.$ac_ext >&5'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then
- ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
- rm -f conftest2.*
- if { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } &&
- test -f conftest2.$ac_objext && { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; };
- then
- # cc works too.
- :
- else
- # cc exists but doesn't like -o.
- eval ac_cv_prog_cc_${ac_cc}_c_o=no
+ break
fi
fi
- fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
else
- eval ac_cv_prog_cc_${ac_cc}_c_o=no
+ am_cv_CC_dependencies_compiler_type=none
fi
-rm -f core conftest*
fi
-if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
fi
-# FIXME: we rely on the cache variable name because
-# there is no other way.
-set dummy $CC
-am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
-if test "$am_t" != yes; then
- # Losing compiler, so override with the script.
- # FIXME: It is wrong to rewrite CC.
- # But if we don't then we get into trouble of one sort or another.
- # A longer-term fix would be to have automake use am__CC in this case,
- # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
- CC="$am_aux_dir/compile $CC"
-fi
ac_ext=c
@@ -5878,8 +5990,8 @@ esac
-macro_version='2.4.2'
-macro_revision='1.3337'
+macro_version='2.4.6'
+macro_revision='2.4.6'
@@ -5893,7 +6005,7 @@ macro_revision='1.3337'
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
@@ -6013,7 +6125,7 @@ func_echo_all ()
$ECHO ""
}
-case "$ECHO" in
+case $ECHO in
printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
$as_echo "printf" >&6; } ;;
print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
@@ -6206,19 +6318,19 @@ test -z "$GREP" && GREP=grep
# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+ withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
else
with_gnu_ld=no
fi
ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
$as_echo_n "checking for ld used by $CC... " >&6; }
case $host in
*-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
+ # gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -6232,7 +6344,7 @@ $as_echo_n "checking for ld used by $CC... " >&6; }
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
- test -z "$LD" && LD="$ac_prog"
+ test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
@@ -6243,7 +6355,7 @@ $as_echo_n "checking for ld used by $CC... " >&6; }
with_gnu_ld=unknown
;;
esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
$as_echo_n "checking for GNU ld... " >&6; }
else
@@ -6254,32 +6366,32 @@ if ${lt_cv_path_LD+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
+ test no != "$with_gnu_ld" && break
;;
*)
- test "$with_gnu_ld" != yes && break
+ test yes != "$with_gnu_ld" && break
;;
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
fi
fi
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
if test -n "$LD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
$as_echo "$LD" >&6; }
@@ -6322,33 +6434,38 @@ if ${lt_cv_path_NM+:} false; then :
else
if test -n "$NM"; then
# Let the user override the test.
- lt_cv_path_NM="$NM"
+ lt_cv_path_NM=$NM
else
- lt_nm_to_check="${ac_tool_prefix}nm"
+ lt_nm_to_check=${ac_tool_prefix}nm
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
# Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
- break
+ break 2
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
- break
+ break 2
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
@@ -6359,15 +6476,15 @@ else
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
done
: ${lt_cv_path_NM=no}
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
$as_echo "$lt_cv_path_NM" >&6; }
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
else
# Didn't find any BSD compatible name lister, look for dumpbin.
if test -n "$DUMPBIN"; then :
@@ -6473,9 +6590,9 @@ esac
fi
fi
- case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
*COFF*)
- DUMPBIN="$DUMPBIN -symbols"
+ DUMPBIN="$DUMPBIN -symbols -headers"
;;
*)
DUMPBIN=:
@@ -6483,8 +6600,8 @@ fi
esac
fi
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
fi
fi
test -z "$NM" && NM=nm
@@ -6535,7 +6652,7 @@ if ${lt_cv_sys_max_cmd_len+:} false; then :
$as_echo_n "(cached) " >&6
else
i=0
- teststring="ABCD"
+ teststring=ABCD
case $build_os in
msdosdjgpp*)
@@ -6575,7 +6692,7 @@ else
lt_cv_sys_max_cmd_len=8192;
;;
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -6625,22 +6742,23 @@ else
;;
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
+ if test -n "$lt_cv_sys_max_cmd_len" && \
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
+ for i in 1 2 3 4 5 6 7 8; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
= "X$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
+ test 17 != "$i" # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
@@ -6658,7 +6776,7 @@ else
fi
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
else
@@ -6676,30 +6794,6 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
: ${MV="mv -f"}
: ${RM="rm -f"}
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
-$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
-$as_echo "$xsi_shell" >&6; }
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
-$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
-$as_echo "$lt_shell_append" >&6; }
-
-
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
@@ -6822,13 +6916,13 @@ esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
reload_cmds=false
fi
;;
darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ if test yes = "$GCC"; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
@@ -6956,13 +7050,13 @@ lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
case $host_os in
aix[4-9]*)
@@ -6989,8 +7083,7 @@ mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
- if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ if ( file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
@@ -7026,10 +7119,6 @@ freebsd* | dragonfly*)
fi
;;
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
haiku*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -7068,11 +7157,11 @@ irix5* | irix6* | nonstopux*)
;;
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
lt_cv_deplibs_check_method=pass_all
;;
-netbsd*)
+netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
else
@@ -7090,8 +7179,8 @@ newos6*)
lt_cv_deplibs_check_method=pass_all
;;
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
@@ -7144,6 +7233,9 @@ sysv4 | sysv4.3*)
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
fi
@@ -7301,8 +7393,8 @@ else
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- # two different shell functions defined in ltmain.sh
- # decide which to use based on capabilities of $DLLTOOL
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
case `$DLLTOOL --help 2>&1` in
*--identify-strict*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
@@ -7314,7 +7406,7 @@ cygwin* | mingw* | pw32* | cegcc*)
;;
*)
# fallback: assume linklib IS sharedlib
- lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
;;
esac
@@ -7431,7 +7523,7 @@ esac
fi
: ${AR=ar}
-: ${AR_FLAGS=cru}
+: ${AR_FLAGS=cr}
@@ -7468,7 +7560,7 @@ if ac_fn_c_try_compile "$LINENO"; then :
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
- if test "$ac_status" -eq 0; then
+ if test 0 -eq "$ac_status"; then
# Ensure the archiver fails upon bogus file names.
rm -f conftest.$ac_objext libconftest.a
{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
@@ -7476,7 +7568,7 @@ if ac_fn_c_try_compile "$LINENO"; then :
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
- if test "$ac_status" -ne 0; then
+ if test 0 -ne "$ac_status"; then
lt_cv_ar_at_file=@
fi
fi
@@ -7489,7 +7581,7 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
$as_echo "$lt_cv_ar_at_file" >&6; }
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
archiver_list_spec=
else
archiver_list_spec=$lt_cv_ar_at_file
@@ -7706,7 +7798,7 @@ old_postuninstall_cmds=
if test -n "$RANLIB"; then
case $host_os in
- openbsd*)
+ bitrig* | openbsd*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
@@ -7796,7 +7888,7 @@ cygwin* | mingw* | pw32* | cegcc*)
symcode='[ABCDGISTW]'
;;
hpux*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
symcode='[ABCDEGRST]'
fi
;;
@@ -7829,14 +7921,44 @@ case `$NM -V 2>&1` in
symcode='[ABCDGIRSTW]' ;;
esac
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
@@ -7854,21 +7976,24 @@ for ac_symprfx in "" "_"; do
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
# Also find C++ and __fastcall symbols from MSVC++,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK '"\
" {last_section=section; section=\$ 3};"\
" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx"
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
@@ -7899,11 +8024,8 @@ _LT_EOF
test $ac_status = 0; }; then
# Now try to grab the symbols.
nlist=conftest.nm
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
- (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s "$nlist"; then
+ $ECHO "$as_me:$LINENO: $NM conftest.$ac_objext | $lt_cv_sys_global_symbol_pipe > $nlist" >&5
+ if eval "$NM" conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist 2>&5 && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
mv -f "$nlist"T "$nlist"
@@ -7916,11 +8038,11 @@ _LT_EOF
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT_DLSYM_CONST
#else
@@ -7946,7 +8068,7 @@ lt__PROGRAM__LTX_preloaded_symbols[] =
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
@@ -7966,13 +8088,13 @@ _LT_EOF
mv conftest.$ac_objext conftstm.$ac_objext
lt_globsym_save_LIBS=$LIBS
lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
+ LIBS=conftstm.$ac_objext
CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ test $ac_status = 0; } && test -s conftest$ac_exeext; then
pipe_works=yes
fi
LIBS=$lt_globsym_save_LIBS
@@ -7993,7 +8115,7 @@ _LT_EOF
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
+ if test yes = "$pipe_works"; then
break
else
lt_cv_sys_global_symbol_pipe=
@@ -8035,6 +8157,16 @@ fi
+
+
+
+
+
+
+
+
+
+
@@ -8058,9 +8190,9 @@ fi
lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
yes)
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_sysroot=`$CC --print-sysroot 2>/dev/null`
fi
;; #(
@@ -8070,8 +8202,8 @@ case ${with_sysroot} in #(
no|'')
;; #(
*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
-$as_echo "${with_sysroot}" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5
+$as_echo "$with_sysroot" >&6; }
as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
;;
esac
@@ -8083,18 +8215,99 @@ $as_echo "${lt_sysroot:-no}" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5
+$as_echo_n "checking for a working dd... " >&6; }
+if ${ac_cv_path_lt_DD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+if test -z "$lt_DD"; then
+ ac_path_lt_DD_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in dd; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_lt_DD" || continue
+if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi
+ $ac_path_lt_DD_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_lt_DD"; then
+ :
+ fi
+else
+ ac_cv_path_lt_DD=$lt_DD
+fi
+
+rm -f conftest.i conftest2.i conftest.out
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5
+$as_echo "$ac_cv_path_lt_DD" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5
+$as_echo_n "checking how to truncate binary pipes... " >&6; }
+if ${lt_cv_truncate_bin+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5
+$as_echo "$lt_cv_truncate_bin" >&6; }
+
+
+
+
+
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
# Check whether --enable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then :
enableval=$enable_libtool_lock;
fi
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
@@ -8103,24 +8316,25 @@ ia64-*-hpux*)
test $ac_status = 0; }; then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
- HPUX_IA64_MODE="32"
+ HPUX_IA64_MODE=32
;;
*ELF-64*)
- HPUX_IA64_MODE="64"
+ HPUX_IA64_MODE=64
;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo '#line '$LINENO' "configure"' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
@@ -8149,9 +8363,50 @@ ia64-*-hpux*)
rm -rf conftest*
;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
@@ -8165,9 +8420,19 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
LD="${LD-ld} -m elf_i386_fbsd"
;;
x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
;;
- ppc64-*linux*|powerpc64-*linux*)
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
@@ -8186,7 +8451,10 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
- ppc*-*linux*|powerpc*-*linux*)
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
@@ -8204,7 +8472,7 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
+ SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -belf"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
@@ -8244,13 +8512,14 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
$as_echo "$lt_cv_cc_needs_belf" >&6; }
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ if test yes != "$lt_cv_cc_needs_belf"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+ CFLAGS=$SAVE_CFLAGS
fi
;;
*-*solaris*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
@@ -8262,7 +8531,7 @@ $as_echo "$lt_cv_cc_needs_belf" >&6; }
case $lt_cv_prog_gnu_ld in
yes*)
case $host in
- i?86-*-solaris*)
+ i?86-*-solaris*|x86_64-*-solaris*)
LD="${LD-ld} -m elf_x86_64"
;;
sparc*-*-solaris*)
@@ -8271,7 +8540,7 @@ $as_echo "$lt_cv_cc_needs_belf" >&6; }
esac
# GNU ld 2.21 introduced _sol2 emulations. Use them if available.
if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
- LD="${LD-ld}_sol2"
+ LD=${LD-ld}_sol2
fi
;;
*)
@@ -8287,7 +8556,7 @@ $as_echo "$lt_cv_cc_needs_belf" >&6; }
;;
esac
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
@@ -8398,7 +8667,7 @@ else
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
$as_echo "$lt_cv_path_mainfest_tool" >&6; }
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
MANIFEST_TOOL=:
fi
@@ -8901,7 +9170,7 @@ if ${lt_cv_apple_cc_single_mod+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
+ if test -z "$LT_MULTI_MODULE"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
@@ -8919,7 +9188,7 @@ else
cat conftest.err >&5
# Otherwise, if the output was created with a 0 exit code from
# the compiler, it worked.
- elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&5
@@ -8958,7 +9227,7 @@ else
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
@@ -8975,8 +9244,8 @@ int forced_loaded() { return 2;}
_LT_EOF
echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
$LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
- echo "$AR cru libconftest.a conftest.o" >&5
- $AR cru libconftest.a conftest.o 2>&5
+ echo "$AR cr libconftest.a conftest.o" >&5
+ $AR cr libconftest.a conftest.o 2>&5
echo "$RANLIB libconftest.a" >&5
$RANLIB libconftest.a 2>&5
cat > conftest.c << _LT_EOF
@@ -8987,7 +9256,7 @@ _LT_EOF
_lt_result=$?
if test -s conftest.err && $GREP force_load conftest.err; then
cat conftest.err >&5
- elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
lt_cv_ld_force_load=yes
else
cat conftest.err >&5
@@ -9000,32 +9269,32 @@ fi
$as_echo "$lt_cv_ld_force_load" >&6; }
case $host_os in
rhapsody* | darwin1.[012])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
- 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[012]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- 10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.0,*86*-darwin8*|10.0,*-darwin[912]*)
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[012][,.]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+ 10.*|11.*)
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
_lt_dar_single_mod='$single_module'
fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
fi
- if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
@@ -9033,6 +9302,41 @@ $as_echo "$lt_cv_ld_force_load" >&6; }
;;
esac
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
# On IRIX 5.3, sys/types and inttypes.h are conflicting.
for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
inttypes.h stdint.h unistd.h
@@ -9086,14 +9390,14 @@ if test "${enable_shared+set}" = set; then :
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
@@ -9117,14 +9421,14 @@ if test "${enable_static+set}" = set; then :
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
@@ -9148,14 +9452,14 @@ if test "${with_pic+set}" = set; then :
*)
pic_mode=default
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for lt_pkg in $withval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$lt_pkg" = "X$lt_p"; then
pic_mode=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
@@ -9163,8 +9467,6 @@ else
fi
-test -z "$pic_mode" && pic_mode=default
-
@@ -9180,14 +9482,14 @@ if test "${enable_fast_install+set}" = set; then :
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
@@ -9201,11 +9503,63 @@ fi
+ shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[5-9]*,yes)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5
+$as_echo_n "checking which variant of shared library versioning to provide... " >&6; }
+
+# Check whether --with-aix-soname was given.
+if test "${with_aix_soname+set}" = set; then :
+ withval=$with_aix_soname; case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname
+else
+ if ${lt_cv_with_aix_soname+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_with_aix_soname=aix
+fi
+
+ with_aix_soname=$lt_cv_with_aix_soname
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5
+$as_echo "$with_aix_soname" >&6; }
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+
+
+
+
+
+
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -9254,7 +9608,7 @@ test -z "$LN_S" && LN_S="ln -s"
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
@@ -9293,7 +9647,7 @@ aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
+ if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -9304,14 +9658,14 @@ esac
ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
# Set sane defaults for various variables
test -z "$CC" && CC=cc
@@ -9320,15 +9674,8 @@ test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
test -z "$LD" && LD=ld
test -z "$ac_objext" && ac_objext=o
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
# Only perform the check for file, if the check method requires it
@@ -9343,22 +9690,22 @@ if ${lt_cv_path_MAGIC_CMD+:} false; then :
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/${ac_tool_prefix}file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -f "$ac_dir/${ac_tool_prefix}file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
@@ -9381,13 +9728,13 @@ _LT_EOF
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac
fi
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
@@ -9409,22 +9756,22 @@ if ${lt_cv_path_MAGIC_CMD+:} false; then :
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -f "$ac_dir/file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
@@ -9447,13 +9794,13 @@ _LT_EOF
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac
fi
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
@@ -9474,7 +9821,7 @@ esac
# Use C for the default configuration in the libtool script
-lt_save_CC="$CC"
+lt_save_CC=$CC
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -9532,7 +9879,7 @@ if test -n "$compiler"; then
lt_prog_compiler_no_builtin_flag=
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $cc_basename in
nvcc*)
lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
@@ -9548,7 +9895,7 @@ else
lt_cv_prog_compiler_rtti_exceptions=no
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-fno-rtti -fno-exceptions"
+ lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
@@ -9578,7 +9925,7 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then
lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
else
:
@@ -9596,17 +9943,18 @@ lt_prog_compiler_pic=
lt_prog_compiler_static=
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_static='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
fi
+ lt_prog_compiler_pic='-fPIC'
;;
amigaos*)
@@ -9617,8 +9965,8 @@ lt_prog_compiler_static=
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
;;
esac
@@ -9634,6 +9982,11 @@ lt_prog_compiler_static=
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
@@ -9704,7 +10057,7 @@ lt_prog_compiler_static=
case $host_os in
aix*)
lt_prog_compiler_wl='-Wl,'
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
else
@@ -9712,10 +10065,29 @@ lt_prog_compiler_static=
fi
;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ esac
+ ;;
+
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
;;
hpux9* | hpux10* | hpux11*)
@@ -9731,7 +10103,7 @@ lt_prog_compiler_static=
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static='${wl}-a ${wl}archive'
+ lt_prog_compiler_static='$wl-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
@@ -9740,14 +10112,20 @@ lt_prog_compiler_static=
lt_prog_compiler_static='-non_shared'
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
+ # old Intel for x86_64, which still supported -KPIC.
ecc*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-static'
;;
+ # flang / f18. f95 an alias for gfortran or flang on Debian
+ flang* | f18* | f95*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
# icc used to be incompatible with GCC.
# ICC 10 doesn't accept -KPIC any more.
icc* | ifort*)
@@ -9767,6 +10145,12 @@ lt_prog_compiler_static=
lt_prog_compiler_pic='-PIC'
lt_prog_compiler_static='-Bstatic'
;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
@@ -9864,7 +10248,7 @@ lt_prog_compiler_static=
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
lt_prog_compiler_pic='-Kconform_pic'
lt_prog_compiler_static='-Bstatic'
fi
@@ -9893,7 +10277,7 @@ lt_prog_compiler_static=
fi
case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
+ # For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic=
;;
@@ -9925,7 +10309,7 @@ else
lt_cv_prog_compiler_pic_works=no
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
@@ -9955,7 +10339,7 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_pic_works"; then
case $lt_prog_compiler_pic in
"" | " "*) ;;
*) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
@@ -9987,7 +10371,7 @@ if ${lt_cv_prog_compiler_static_works+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_static_works=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -10006,13 +10390,13 @@ else
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_static_works"; then
:
else
lt_prog_compiler_static=
@@ -10132,8 +10516,8 @@ $as_echo "$lt_cv_prog_compiler_c_o" >&6; }
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
$as_echo_n "checking if we can lock with hard links... " >&6; }
@@ -10145,9 +10529,9 @@ $as_echo_n "checking if we can lock with hard links... " >&6; }
ln conftest.a conftest.b 2>/dev/null && hard_links=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
$as_echo "$hard_links" >&6; }
- if test "$hard_links" = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ if test no = "$hard_links"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
need_locks=warn
fi
else
@@ -10190,9 +10574,9 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
@@ -10207,7 +10591,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
with_gnu_ld=no
fi
;;
@@ -10215,9 +10599,12 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
- openbsd*)
+ openbsd* | bitrig*)
with_gnu_ld=no
;;
+ linux* | k*bsd*-gnu | gnu*)
+ link_all_deplibs=no
+ ;;
esac
ld_shlibs=yes
@@ -10225,7 +10612,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
# On some targets, GNU ld is compatible enough with the native linker
# that we're better off using the native interface for both.
lt_use_gnu_ld_interface=no
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
case $host_os in
aix*)
# The AIX port of GNU ld has always aspired to compatibility
@@ -10247,24 +10634,24 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
esac
fi
- if test "$lt_use_gnu_ld_interface" = yes; then
+ if test yes = "$lt_use_gnu_ld_interface"; then
# If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
+ wlarc='$wl'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ export_dynamic_flag_spec='$wl--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
whole_archive_flag_spec=
fi
supports_anon_versioning=no
- case `$LD -v 2>&1` in
+ case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
*GNU\ gold*) supports_anon_versioning=yes ;;
*\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -10277,7 +10664,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
case $host_os in
aix[3-9]*)
# On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
+ if test ia64 != "$host_cpu"; then
ld_shlibs=no
cat <<_LT_EOF 1>&2
@@ -10296,7 +10683,7 @@ _LT_EOF
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
archive_expsym_cmds=''
;;
m68k)
@@ -10312,7 +10699,7 @@ _LT_EOF
allow_undefined_flag=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
ld_shlibs=no
fi
@@ -10322,7 +10709,7 @@ _LT_EOF
# _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
- export_dynamic_flag_spec='${wl}--export-all-symbols'
+ export_dynamic_flag_spec='$wl--export-all-symbols'
allow_undefined_flag=unsupported
always_export_symbols=no
enable_shared_with_static_runtimes=yes
@@ -10330,61 +10717,89 @@ _LT_EOF
exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
ld_shlibs=no
fi
;;
haiku*)
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
link_all_deplibs=yes
;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
interix[3-9]*)
hardcode_direct=no
hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
+ if test linux-dietlibc = "$host_os"; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
+ && test no = "$tmp_diet"
then
tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group f77 and f90 compilers
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
@@ -10395,42 +10810,47 @@ _LT_EOF
lf95*) # Lahey Fortran 8.1
whole_archive_flag_spec=
tmp_sharedflag='--shared' ;;
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
nvcc*) # Cuda Compiler Driver 2.2
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
compiler_needs_object=yes
;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
compiler_needs_object=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
- archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
+ tcc*)
+ export_dynamic_flag_spec='-rdynamic'
+ ;;
xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
@@ -10439,13 +10859,13 @@ _LT_EOF
fi
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
@@ -10463,8 +10883,8 @@ _LT_EOF
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
@@ -10476,7 +10896,7 @@ _LT_EOF
ld_shlibs=no
cat <<_LT_EOF 1>&2
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
@@ -10491,9 +10911,9 @@ _LT_EOF
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
@@ -10510,15 +10930,15 @@ _LT_EOF
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
esac
- if test "$ld_shlibs" = no; then
+ if test no = "$ld_shlibs"; then
runpath_var=
hardcode_libdir_flag_spec=
export_dynamic_flag_spec=
@@ -10534,7 +10954,7 @@ _LT_EOF
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
hardcode_minus_L=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
hardcode_direct=unsupported
@@ -10542,34 +10962,57 @@ _LT_EOF
;;
aix[4-9]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global
- # defined symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
aix_use_runtimelinking=yes
break
fi
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
@@ -10588,13 +11031,21 @@ _LT_EOF
hardcode_direct_absolute=yes
hardcode_libdir_separator=':'
link_all_deplibs=yes
- file_list_spec='${wl}-f,'
+ file_list_spec='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ ;;
+ esac
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
case $host_os in aix4.[012]|aix4.[012].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
@@ -10613,35 +11064,42 @@ _LT_EOF
;;
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- export_dynamic_flag_spec='${wl}-bexpall'
+ export_dynamic_flag_spec='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
always_export_symbols=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
allow_undefined_flag='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
- if test "${lt_cv_aix_libpath+set}" = set; then
+ if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
if ${lt_cv_aix_libpath_+:} false; then :
@@ -10676,7 +11134,7 @@ fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
if test -z "$lt_cv_aix_libpath_"; then
- lt_cv_aix_libpath_="/usr/lib:/lib"
+ lt_cv_aix_libpath_=/usr/lib:/lib
fi
fi
@@ -10684,17 +11142,17 @@ fi
aix_libpath=$lt_cv_aix_libpath_
fi
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib'
allow_undefined_flag="-z nodefs"
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
- if test "${lt_cv_aix_libpath+set}" = set; then
+ if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
if ${lt_cv_aix_libpath_+:} false; then :
@@ -10729,7 +11187,7 @@ fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
if test -z "$lt_cv_aix_libpath_"; then
- lt_cv_aix_libpath_="/usr/lib:/lib"
+ lt_cv_aix_libpath_=/usr/lib:/lib
fi
fi
@@ -10737,21 +11195,33 @@ fi
aix_libpath=$lt_cv_aix_libpath_
fi
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- no_undefined_flag=' ${wl}-bernotok'
- allow_undefined_flag=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ no_undefined_flag=' $wl-bernotok'
+ allow_undefined_flag=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec='$convenience'
fi
archive_cmds_need_lc=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
@@ -10760,7 +11230,7 @@ fi
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
archive_expsym_cmds=''
;;
m68k)
@@ -10790,16 +11260,17 @@ fi
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
enable_shared_with_static_runtimes=yes
@@ -10808,18 +11279,18 @@ fi
# Don't use ranlib
old_postinstall_cmds='chmod 644 $oldlib'
postlink_cmds='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# Assume MSVC wrapper
@@ -10828,7 +11299,7 @@ fi
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
@@ -10847,24 +11318,24 @@ fi
hardcode_direct=no
hardcode_automatic=yes
hardcode_shlibpath_var=unsupported
- if test "$lt_cv_ld_force_load" = "yes"; then
- whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ if test yes = "$lt_cv_ld_force_load"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
else
whole_archive_flag_spec=''
fi
link_all_deplibs=yes
- allow_undefined_flag="$_lt_dar_allow_undefined"
+ allow_undefined_flag=$_lt_dar_allow_undefined
case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
- if test "$_lt_dar_can_shared" = "yes"; then
+ if test yes = "$_lt_dar_can_shared"; then
output_verbose_link_cmd=func_echo_all
- archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
else
ld_shlibs=no
@@ -10906,33 +11377,33 @@ fi
;;
hpux9*)
- if test "$GCC" = yes; then
- archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GCC"; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
- archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
fi
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
;;
hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
@@ -10940,25 +11411,25 @@ fi
;;
hpux11*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ if test yes,no = "$GCC,$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
@@ -10970,7 +11441,7 @@ if ${lt_cv_prog_compiler__b+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler__b=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS -b"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -10989,14 +11460,14 @@ else
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
$as_echo "$lt_cv_prog_compiler__b" >&6; }
-if test x"$lt_cv_prog_compiler__b" = xyes; then
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+if test yes = "$lt_cv_prog_compiler__b"; then
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
@@ -11004,8 +11475,8 @@ fi
;;
esac
fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
case $host_cpu in
@@ -11016,7 +11487,7 @@ fi
*)
hardcode_direct=yes
hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
@@ -11027,8 +11498,8 @@ fi
;;
irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
@@ -11038,8 +11509,8 @@ $as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >
if ${lt_cv_irix_exported_symbol+:} false; then :
$as_echo_n "(cached) " >&6
else
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int foo (void) { return 0; }
@@ -11051,25 +11522,36 @@ else
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
$as_echo "$lt_cv_irix_exported_symbol" >&6; }
- if test "$lt_cv_irix_exported_symbol" = yes; then
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
fi
+ link_all_deplibs=no
else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
fi
archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
inherit_rpath=yes
link_all_deplibs=yes
;;
- netbsd*)
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ ld_shlibs=yes
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
@@ -11083,7 +11565,7 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
newsos6)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
hardcode_shlibpath_var=no
;;
@@ -11091,27 +11573,19 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
*nto* | *qnx*)
;;
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
hardcode_direct=yes
hardcode_shlibpath_var=no
hardcode_direct_absolute=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
fi
else
ld_shlibs=no
@@ -11122,33 +11596,53 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
- archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
;;
osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
fi
archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
@@ -11159,24 +11653,24 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
solaris*)
no_undefined_flag=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
- wlarc='${wl}'
- archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ wlarc='$wl'
+ archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
@@ -11186,11 +11680,11 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ if test yes = "$GCC"; then
+ whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
else
whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
fi
@@ -11200,10 +11694,10 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
;;
sunos4*)
- if test "x$host_vendor" = xsequent; then
+ if test sequent = "$host_vendor"; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
@@ -11252,43 +11746,43 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag='${wl}-z,text'
+ no_undefined_flag='$wl-z,text'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- no_undefined_flag='${wl}-z,text'
- allow_undefined_flag='${wl}-z,nodefs'
+ no_undefined_flag='$wl-z,text'
+ allow_undefined_flag='$wl-z,nodefs'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_flag_spec='$wl-R,$libdir'
hardcode_libdir_separator=':'
link_all_deplibs=yes
- export_dynamic_flag_spec='${wl}-Bexport'
+ export_dynamic_flag_spec='$wl-Bexport'
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
@@ -11303,10 +11797,10 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
;;
esac
- if test x$host_vendor = xsni; then
+ if test sni = "$host_vendor"; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- export_dynamic_flag_spec='${wl}-Blargedynsym'
+ export_dynamic_flag_spec='$wl-Blargedynsym'
;;
esac
fi
@@ -11314,7 +11808,7 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
$as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
+test no = "$ld_shlibs" && can_build_shared=no
with_gnu_ld=$with_gnu_ld
@@ -11340,7 +11834,7 @@ x|xyes)
# Assume -lc should be added
archive_cmds_need_lc=yes
- if test "$enable_shared" = yes && test "$GCC" = yes; then
+ if test yes,yes = "$GCC,$enable_shared"; then
case $archive_cmds in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
@@ -11555,14 +12049,14 @@ esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
$as_echo_n "checking dynamic linker characteristics... " >&6; }
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
esac
case $host_os in
- mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
- *) lt_sed_strip_eq="s,=/,/,g" ;;
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
esac
lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
case $lt_search_path_spec in
@@ -11578,28 +12072,35 @@ if test "$GCC" = yes; then
;;
esac
# Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
+ # and add multilib dir if necessary...
lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
lt_count++;
} else {
if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
+ lt_foo = "/" $lt_i lt_foo;
} else {
lt_count--;
}
@@ -11613,7 +12114,7 @@ BEGIN {RS=" "; FS="/|\n";} {
# for these hosts.
case $host_os in
mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
- $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+ $SED 's|/\([A-Za-z]:\)|\1|g'` ;;
esac
sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
@@ -11622,7 +12123,7 @@ fi
library_names_spec=
libname_spec='lib$name'
soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
@@ -11639,14 +12140,16 @@ hardcode_into_libs=no
# flags to be left without arguments
need_version=unknown
+
+
case $host_os in
aix3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
+ soname_spec='$libname$release$shared_ext$major'
;;
aix[4-9]*)
@@ -11654,41 +12157,91 @@ aix[4-9]*)
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a(lib.so.V)'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
shlibpath_var=LIBPATH
fi
;;
@@ -11698,18 +12251,18 @@ amigaos*)
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
- library_names_spec='${libname}${shared_ext}'
+ library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
@@ -11717,8 +12270,8 @@ beos*)
bsdi[45]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -11730,7 +12283,7 @@ bsdi[45]*)
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
- shrext_cmds=".dll"
+ shrext_cmds=.dll
need_version=no
need_lib_prefix=no
@@ -11739,8 +12292,8 @@ cygwin* | mingw* | pw32* | cegcc*)
# gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
@@ -11756,17 +12309,17 @@ cygwin* | mingw* | pw32* | cegcc*)
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
;;
esac
dynamic_linker='Win32 ld.exe'
@@ -11775,8 +12328,8 @@ cygwin* | mingw* | pw32* | cegcc*)
*,cl*)
# Native MSVC
libname_spec='$name'
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- library_names_spec='${libname}.dll.lib'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
case $build_os in
mingw*)
@@ -11803,7 +12356,7 @@ cygwin* | mingw* | pw32* | cegcc*)
sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
;;
*)
- sys_lib_search_path_spec="$LIB"
+ sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
# It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -11816,8 +12369,8 @@ cygwin* | mingw* | pw32* | cegcc*)
esac
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
@@ -11830,7 +12383,7 @@ cygwin* | mingw* | pw32* | cegcc*)
*)
# Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
dynamic_linker='Win32 ld.exe'
;;
esac
@@ -11843,8 +12396,8 @@ darwin* | rhapsody*)
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -11857,8 +12410,8 @@ dgux*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -11876,12 +12429,13 @@ freebsd* | dragonfly*)
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
@@ -11899,22 +12453,11 @@ freebsd* | dragonfly*)
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
;;
haiku*)
@@ -11922,10 +12465,10 @@ haiku*)
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
@@ -11943,14 +12486,15 @@ hpux9* | hpux10* | hpux11*)
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
@@ -11958,8 +12502,8 @@ hpux9* | hpux10* | hpux11*)
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
@@ -11968,8 +12512,8 @@ hpux9* | hpux10* | hpux11*)
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -11982,8 +12526,8 @@ interix[3-9]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -11994,7 +12538,7 @@ irix5* | irix6* | nonstopux*)
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
@@ -12002,8 +12546,8 @@ irix5* | irix6* | nonstopux*)
esac
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
@@ -12022,8 +12566,8 @@ irix5* | irix6* | nonstopux*)
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
@@ -12032,13 +12576,33 @@ linux*oldld* | linux*aout* | linux*coff*)
dynamic_linker=no
;;
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -12082,14 +12646,15 @@ fi
# before this can be enabled.
hardcode_into_libs=yes
- # Add ABI-specific directories to the system library path.
- sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
-
- # Append ld.so.conf contents to the search path
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -12101,17 +12666,29 @@ fi
dynamic_linker='GNU/Linux ld.so'
;;
+netbsdelf*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
+
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
@@ -12121,7 +12698,7 @@ netbsd*)
newsos6)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
@@ -12130,58 +12707,68 @@ newsos6)
version_type=qnx
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='ldqnx.so'
;;
-openbsd*)
+openbsd* | bitrig*)
version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
else
- shlibpath_overrides_runpath=yes
+ need_version=yes
fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
- shrext_cmds=".dll"
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
@@ -12192,8 +12779,8 @@ solaris*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
@@ -12203,11 +12790,11 @@ solaris*)
sunos4*)
version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
@@ -12215,8 +12802,8 @@ sunos4*)
sysv4 | sysv4.3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
@@ -12237,24 +12824,24 @@ sysv4 | sysv4.3*)
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
+ version_type=sco
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -12272,7 +12859,7 @@ tpf*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
@@ -12280,8 +12867,8 @@ tpf*)
uts4*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -12291,20 +12878,35 @@ uts4*)
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
@@ -12401,15 +13003,15 @@ $as_echo_n "checking how to hardcode library paths into programs... " >&6; }
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" ||
test -n "$runpath_var" ||
- test "X$hardcode_automatic" = "Xyes" ; then
+ test yes = "$hardcode_automatic"; then
# We can hardcode non-existent directories.
- if test "$hardcode_direct" != no &&
+ if test no != "$hardcode_direct" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
- test "$hardcode_minus_L" != no; then
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" &&
+ test no != "$hardcode_minus_L"; then
# Linking always hardcodes the temporary library directory.
hardcode_action=relink
else
@@ -12424,12 +13026,12 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
$as_echo "$hardcode_action" >&6; }
-if test "$hardcode_action" = relink ||
- test "$inherit_rpath" = yes; then
+if test relink = "$hardcode_action" ||
+ test yes = "$inherit_rpath"; then
# Fast installation is not supported
enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
@@ -12439,7 +13041,7 @@ fi
- if test "x$enable_dlopen" != xyes; then
+ if test yes != "$enable_dlopen"; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
@@ -12449,23 +13051,23 @@ else
case $host_os in
beos*)
- lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen=load_add_on
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen=LoadLibrary
lt_cv_dlopen_libs=
;;
cygwin*)
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
;;
darwin*)
- # if libdl is installed we need to link against it
+ # if libdl is installed we need to link against it
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
if ${ac_cv_lib_dl_dlopen+:} false; then :
@@ -12503,10 +13105,10 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
else
- lt_cv_dlopen="dyld"
+ lt_cv_dlopen=dyld
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
@@ -12514,10 +13116,18 @@ fi
;;
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
*)
ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
if test "x$ac_cv_func_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load"
+ lt_cv_dlopen=shl_load
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
$as_echo_n "checking for shl_load in -ldld... " >&6; }
@@ -12556,11 +13166,11 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+ lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld
else
ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
if test "x$ac_cv_func_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
@@ -12599,7 +13209,7 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
$as_echo_n "checking for dlopen in -lsvld... " >&6; }
@@ -12638,7 +13248,7 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
$as_echo_n "checking for dld_link in -ldld... " >&6; }
@@ -12677,7 +13287,7 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+ lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld
fi
@@ -12698,21 +13308,21 @@ fi
;;
esac
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
+ if test no = "$lt_cv_dlopen"; then
enable_dlopen=no
+ else
+ enable_dlopen=yes
fi
case $lt_cv_dlopen in
dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- save_LIBS="$LIBS"
+ save_LIBS=$LIBS
LIBS="$lt_cv_dlopen_libs $LIBS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
@@ -12720,7 +13330,7 @@ $as_echo_n "checking whether a program can dlopen itself... " >&6; }
if ${lt_cv_dlopen_self+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test "$cross_compiling" = yes; then :
+ if test yes = "$cross_compiling"; then :
lt_cv_dlopen_self=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -12767,9 +13377,9 @@ else
# endif
#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
@@ -12799,7 +13409,7 @@ _LT_EOF
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
@@ -12819,14 +13429,14 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
$as_echo "$lt_cv_dlopen_self" >&6; }
- if test "x$lt_cv_dlopen_self" = xyes; then
+ if test yes = "$lt_cv_dlopen_self"; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
if ${lt_cv_dlopen_self_static+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test "$cross_compiling" = yes; then :
+ if test yes = "$cross_compiling"; then :
lt_cv_dlopen_self_static=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -12873,9 +13483,9 @@ else
# endif
#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
@@ -12905,7 +13515,7 @@ _LT_EOF
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
@@ -12926,9 +13536,9 @@ fi
$as_echo "$lt_cv_dlopen_self_static" >&6; }
fi
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
;;
esac
@@ -12972,7 +13582,7 @@ else
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
- if test -n "$STRIP" ; then
+ if test -n "$STRIP"; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
@@ -13000,7 +13610,7 @@ fi
- # Report which library types will actually be built
+ # Report what library types will actually be built
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
$as_echo_n "checking if libtool supports shared libraries... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
@@ -13008,13 +13618,13 @@ $as_echo "$can_build_shared" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
$as_echo_n "checking whether to build shared libraries... " >&6; }
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
@@ -13022,8 +13632,12 @@ $as_echo_n "checking whether to build shared libraries... " >&6; }
;;
aix[4-9]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -13033,7 +13647,7 @@ $as_echo "$enable_shared" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
$as_echo_n "checking whether to build static libraries... " >&6; }
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
$as_echo "$enable_static" >&6; }
@@ -13047,7 +13661,7 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-CC="$lt_save_CC"
+CC=$lt_save_CC
@@ -13254,6 +13868,82 @@ $as_echo "#define HAVE_LC_MESSAGES 1" >>confdefs.h
XGETTEXT=:
INTLLIBS=
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5
+$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
+if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <CoreFoundation/CFPreferences.h>
+int
+main ()
+{
+CFPreferencesCopyAppValue(NULL, NULL)
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ gt_cv_func_CFPreferencesCopyAppValue=yes
+else
+ gt_cv_func_CFPreferencesCopyAppValue=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
+$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; }
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+
+$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h
+
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5
+$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; }
+if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <CoreFoundation/CFLocale.h>
+int
+main ()
+{
+CFLocaleCopyCurrent();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ gt_cv_func_CFLocaleCopyCurrent=yes
+else
+ gt_cv_func_CFLocaleCopyCurrent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
+$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; }
+ if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+
+$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h
+
+ fi
+ INTL_MACOSX_LIBS=
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+ INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+ fi
+
+
+
ac_fn_c_check_header_mongrel "$LINENO" "libintl.h" "ac_cv_header_libintl_h" "$ac_includes_default"
if test "x$ac_cv_header_libintl_h" = xyes; then :
gt_cv_func_dgettext_libintl="no"
@@ -13594,7 +14284,7 @@ done
fi
if test "$gt_cv_func_dgettext_libintl" = "yes"; then
- INTLLIBS="-lintl $libintl_extra_libs"
+ INTLLIBS="-lintl $libintl_extra_libs $INTL_MACOSX_LIBS"
fi
if test "$gt_cv_have_gettext" = "yes"; then
@@ -13909,6 +14599,8 @@ $as_echo "$LINGUAS" >&6; }
+
+
# Check whether --enable-schemas-compile was given.
if test "${enable_schemas_compile+set}" = set; then :
enableval=$enable_schemas_compile; case ${enableval} in
@@ -14041,10 +14733,32 @@ $as_echo "no" >&6; }
fi
gsettingsschemadir=${datadir}/glib-2.0/schemas
- if test x$cross_compiling != xyes; then
- GLIB_COMPILE_SCHEMAS=`$PKG_CONFIG --variable glib_compile_schemas gio-2.0`
- else
- # Extract the first word of "glib-compile-schemas", so it can be a program name with args.
+ if test x$cross_compiling != xyes; then :
+
+if test -n "$GLIB_COMPILE_SCHEMAS"; then
+ pkg_cv_GLIB_COMPILE_SCHEMAS="$GLIB_COMPILE_SCHEMAS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gio-2.0\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "gio-2.0") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_GLIB_COMPILE_SCHEMAS=`$PKG_CONFIG --variable="glib_compile_schemas" "gio-2.0" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+GLIB_COMPILE_SCHEMAS=$pkg_cv_GLIB_COMPILE_SCHEMAS
+
+if test "x$GLIB_COMPILE_SCHEMAS" = x""; then :
+
+fi
+else
+ # Extract the first word of "glib-compile-schemas", so it can be a program name with args.
set dummy glib-compile-schemas; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -14084,7 +14798,7 @@ $as_echo "no" >&6; }
fi
- fi
+fi
if test "x$GLIB_COMPILE_SCHEMAS" = "x"; then
as_fn_error $? "glib-compile-schemas not found." "$LINENO" 5
@@ -14100,7 +14814,7 @@ mostlyclean-am: clean-gsettings-schemas
gsettings__enum_file = $(addsuffix .enums.xml,$(gsettings_ENUM_NAMESPACE))
%.gschema.valid: %.gschema.xml $(gsettings__enum_file)
- $(AM_V_GEN) if test -f "$<"; then d=; else d="$(srcdir)/"; fi; $(GLIB_COMPILE_SCHEMAS) --strict --dry-run $(addprefix --schema-file=,$(gsettings__enum_file)) --schema-file=$${d}$< && touch $@
+ $(AM_V_GEN) $(GLIB_COMPILE_SCHEMAS) --strict --dry-run $(addprefix --schema-file=,$(gsettings__enum_file)) --schema-file=$< && mkdir -p $(@D) && touch $@
all-am: $(gsettings_SCHEMAS:.xml=.valid)
uninstall-am: uninstall-gsettings-schemas
@@ -14256,8 +14970,16 @@ done
pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNOME_SCREENSAVER" >&5
-$as_echo_n "checking for GNOME_SCREENSAVER... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for x11 >= $X11_REQUIRED_VERSION
+ gtk+-3.0 >= $GTK_REQUIRED_VERSION
+ dbus-glib-1 >= $DBUS_REQUIRED_VERSION
+ gnome-desktop-3.0 >= $GNOME_DESKTOP_REQUIRED_VERSION
+ gsettings-desktop-schemas >= $GSETTINGS_DESKTOP_SCHEMAS_REQUIRED_VERSION" >&5
+$as_echo_n "checking for x11 >= $X11_REQUIRED_VERSION
+ gtk+-3.0 >= $GTK_REQUIRED_VERSION
+ dbus-glib-1 >= $DBUS_REQUIRED_VERSION
+ gnome-desktop-3.0 >= $GNOME_DESKTOP_REQUIRED_VERSION
+ gsettings-desktop-schemas >= $GSETTINGS_DESKTOP_SCHEMAS_REQUIRED_VERSION... " >&6; }
if test -n "$GNOME_SCREENSAVER_CFLAGS"; then
pkg_cv_GNOME_SCREENSAVER_CFLAGS="$GNOME_SCREENSAVER_CFLAGS"
@@ -14321,7 +15043,7 @@ fi
if test $pkg_failed = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
@@ -14360,7 +15082,7 @@ Alternatively, you may set the environment variables GNOME_SCREENSAVER_CFLAGS
and GNOME_SCREENSAVER_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
elif test $pkg_failed = untried; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
@@ -14386,8 +15108,10 @@ fi
pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNOME_SCREENSAVER_DIALOG" >&5
-$as_echo_n "checking for GNOME_SCREENSAVER_DIALOG... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gthread-2.0
+ gtk+-3.0 >= $GTK_REQUIRED_VERSION" >&5
+$as_echo_n "checking for gthread-2.0
+ gtk+-3.0 >= $GTK_REQUIRED_VERSION... " >&6; }
if test -n "$GNOME_SCREENSAVER_DIALOG_CFLAGS"; then
pkg_cv_GNOME_SCREENSAVER_DIALOG_CFLAGS="$GNOME_SCREENSAVER_DIALOG_CFLAGS"
@@ -14433,7 +15157,7 @@ fi
if test $pkg_failed = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
@@ -14463,7 +15187,7 @@ Alternatively, you may set the environment variables GNOME_SCREENSAVER_DIALOG_CF
and GNOME_SCREENSAVER_DIALOG_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
elif test $pkg_failed = untried; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
@@ -14489,8 +15213,12 @@ fi
pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNOME_SCREENSAVER_CAPPLET" >&5
-$as_echo_n "checking for GNOME_SCREENSAVER_CAPPLET... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gio-2.0 >= $GLIB_REQUIRED_VERSION
+ gtk+-3.0 >= $GTK_REQUIRED_VERSION
+ gsettings-desktop-schemas >= $GSETTINGS_DESKTOP_SCHEMAS_REQUIRED_VERSION" >&5
+$as_echo_n "checking for gio-2.0 >= $GLIB_REQUIRED_VERSION
+ gtk+-3.0 >= $GTK_REQUIRED_VERSION
+ gsettings-desktop-schemas >= $GSETTINGS_DESKTOP_SCHEMAS_REQUIRED_VERSION... " >&6; }
if test -n "$GNOME_SCREENSAVER_CAPPLET_CFLAGS"; then
pkg_cv_GNOME_SCREENSAVER_CAPPLET_CFLAGS="$GNOME_SCREENSAVER_CAPPLET_CFLAGS"
@@ -14542,7 +15270,7 @@ fi
if test $pkg_failed = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
@@ -14575,7 +15303,7 @@ Alternatively, you may set the environment variables GNOME_SCREENSAVER_CAPPLET_C
and GNOME_SCREENSAVER_CAPPLET_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
elif test $pkg_failed = untried; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
@@ -14601,8 +15329,10 @@ fi
pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNOME_SCREENSAVER_COMMAND" >&5
-$as_echo_n "checking for GNOME_SCREENSAVER_COMMAND... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gio-2.0 >= $GLIB_REQUIRED_VERSION
+ gobject-2.0 >= $GLIB_REQUIRED_VERSION" >&5
+$as_echo_n "checking for gio-2.0 >= $GLIB_REQUIRED_VERSION
+ gobject-2.0 >= $GLIB_REQUIRED_VERSION... " >&6; }
if test -n "$GNOME_SCREENSAVER_COMMAND_CFLAGS"; then
pkg_cv_GNOME_SCREENSAVER_COMMAND_CFLAGS="$GNOME_SCREENSAVER_COMMAND_CFLAGS"
@@ -14648,7 +15378,7 @@ fi
if test $pkg_failed = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
@@ -14678,7 +15408,7 @@ Alternatively, you may set the environment variables GNOME_SCREENSAVER_COMMAND_C
and GNOME_SCREENSAVER_COMMAND_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
elif test $pkg_failed = untried; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
@@ -15440,7 +16170,6 @@ else
fi
- warnCFLAGS=
if test "x$GCC" != xyes; then
enable_compile_warnings=no
fi
@@ -15448,25 +16177,50 @@ fi
warning_flags=
realsave_CFLAGS="$CFLAGS"
+ base_warn_flags=" \
+ -Wall \
+ -Wstrict-prototypes \
+ -Wnested-externs \
+ "
+
+ base_error_flags=" \
+ -Werror=missing-prototypes \
+ -Werror=implicit-function-declaration \
+ -Werror=pointer-arith \
+ -Werror=init-self \
+ -Werror=format-security \
+ -Werror=format=2 \
+ -Werror=missing-include-dirs \
+ -Werror=return-type \
+ "
+
+ additional_flags=""
+
case "$enable_compile_warnings" in
no)
- warning_flags=
- ;;
+ warning_flags="-w"
+ ;;
minimum)
- warning_flags="-Wall"
- ;;
- yes)
- warning_flags="-Wall -Wmissing-prototypes"
- ;;
- maximum|error)
- warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith"
- CFLAGS="$warning_flags $CFLAGS"
- for option in -Wno-sign-compare; do
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $option"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether gcc understands $option" >&5
+ warning_flags="-Wall"
+ ;;
+ yes|maximum|error)
+ warning_flags="$base_warn_flags $base_error_flags $additional_flags"
+ ;;
+ *)
+ as_fn_error $? "Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" "$LINENO" 5
+ ;;
+ esac
+
+ if test "$enable_compile_warnings" = "error" ; then
+ warning_flags="$warning_flags -Werror"
+ fi
+
+ for option in $warning_flags; do
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $option"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether gcc understands $option" >&5
$as_echo_n "checking whether gcc understands $option... " >&6; }
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -15483,29 +16237,21 @@ else
has_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CFLAGS="$SAVE_CFLAGS"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $has_option" >&5
+ CFLAGS="$save_CFLAGS"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $has_option" >&5
$as_echo "$has_option" >&6; }
- if test $has_option = yes; then
- warning_flags="$warning_flags $option"
- fi
- unset has_option
- unset SAVE_CFLAGS
- done
- unset option
- if test "$enable_compile_warnings" = "error" ; then
- warning_flags="$warning_flags -Werror"
+ if test $has_option = yes; then
+ tested_warning_flags="$tested_warning_flags $option"
fi
- ;;
- *)
- as_fn_error $? "Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" "$LINENO" 5
- ;;
- esac
+ unset has_option
+ unset save_CFLAGS
+ done
+ unset option
CFLAGS="$realsave_CFLAGS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking what warning flags to pass to the C compiler" >&5
$as_echo_n "checking what warning flags to pass to the C compiler... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $warning_flags" >&5
-$as_echo "$warning_flags" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tested_warning_flags" >&5
+$as_echo "$tested_warning_flags" >&6; }
# Check whether --enable-iso-c was given.
if test "${enable_iso_c+set}" = set; then :
@@ -15533,7 +16279,7 @@ $as_echo_n "checking what language compliance flags to pass to the C compiler...
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $complCFLAGS" >&5
$as_echo "$complCFLAGS" >&6; }
- WARN_CFLAGS="$warning_flags $complCFLAGS"
+ WARN_CFLAGS="$tested_warning_flags $complCFLAGS"
@@ -15543,8 +16289,8 @@ SAVER_MODULES="gthread-2.0 gtk+-3.0 >= $GTK_REQUIRED_VERSION"
pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNOME_SCREENSAVER_SAVER" >&5
-$as_echo_n "checking for GNOME_SCREENSAVER_SAVER... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $SAVER_MODULES" >&5
+$as_echo_n "checking for $SAVER_MODULES... " >&6; }
if test -n "$GNOME_SCREENSAVER_SAVER_CFLAGS"; then
pkg_cv_GNOME_SCREENSAVER_SAVER_CFLAGS="$GNOME_SCREENSAVER_SAVER_CFLAGS"
@@ -15584,7 +16330,7 @@ fi
if test $pkg_failed = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
@@ -15611,7 +16357,7 @@ Alternatively, you may set the environment variables GNOME_SCREENSAVER_SAVER_CFL
and GNOME_SCREENSAVER_SAVER_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
elif test $pkg_failed = untried; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
@@ -16873,19 +17619,19 @@ fi
pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for SYSTEMD" >&5
-$as_echo_n "checking for SYSTEMD... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libsystemd-login" >&5
+$as_echo_n "checking for libsystemd-login... " >&6; }
if test -n "$SYSTEMD_CFLAGS"; then
pkg_cv_SYSTEMD_CFLAGS="$SYSTEMD_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libsystemd-login libsystemd-daemon\""; } >&5
- ($PKG_CONFIG --exists --print-errors "libsystemd-login libsystemd-daemon") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libsystemd-login\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "libsystemd-login") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_SYSTEMD_CFLAGS=`$PKG_CONFIG --cflags "libsystemd-login libsystemd-daemon" 2>/dev/null`
+ pkg_cv_SYSTEMD_CFLAGS=`$PKG_CONFIG --cflags "libsystemd-login" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
@@ -16897,12 +17643,12 @@ if test -n "$SYSTEMD_LIBS"; then
pkg_cv_SYSTEMD_LIBS="$SYSTEMD_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libsystemd-login libsystemd-daemon\""; } >&5
- ($PKG_CONFIG --exists --print-errors "libsystemd-login libsystemd-daemon") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libsystemd-login\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "libsystemd-login") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_SYSTEMD_LIBS=`$PKG_CONFIG --libs "libsystemd-login libsystemd-daemon" 2>/dev/null`
+ pkg_cv_SYSTEMD_LIBS=`$PKG_CONFIG --libs "libsystemd-login" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
@@ -16914,7 +17660,7 @@ fi
if test $pkg_failed = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
@@ -16923,16 +17669,16 @@ else
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- SYSTEMD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libsystemd-login libsystemd-daemon" 2>&1`
+ SYSTEMD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libsystemd-login" 2>&1`
else
- SYSTEMD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libsystemd-login libsystemd-daemon" 2>&1`
+ SYSTEMD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libsystemd-login" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$SYSTEMD_PKG_ERRORS" >&5
have_systemd=no
elif test $pkg_failed = untried; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
have_systemd=no
else
@@ -16978,8 +17724,8 @@ fi
if test x$with_kbd_layout_indicator != xno; then
pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBGNOMEKBDUI" >&5
-$as_echo_n "checking for LIBGNOMEKBDUI... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libgnomekbdui >= $LIBGNOMEKBDUI_REQUIRED_VERSION libxklavier" >&5
+$as_echo_n "checking for libgnomekbdui >= $LIBGNOMEKBDUI_REQUIRED_VERSION libxklavier... " >&6; }
if test -n "$LIBGNOMEKBDUI_CFLAGS"; then
pkg_cv_LIBGNOMEKBDUI_CFLAGS="$LIBGNOMEKBDUI_CFLAGS"
@@ -17019,7 +17765,7 @@ fi
if test $pkg_failed = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
@@ -17037,7 +17783,7 @@ fi
have_libgnomekbdui=no
elif test $pkg_failed = untried; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
have_libgnomekbdui=no
else
@@ -17294,7 +18040,6 @@ DEFS=-DHAVE_CONFIG_H
ac_libobjs=
ac_ltlibobjs=
-U=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
@@ -17329,6 +18074,10 @@ if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
+
+ ac_config_commands="$ac_config_commands po/stamp-it"
+
+
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
as_fn_error $? "conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
@@ -17337,10 +18086,6 @@ if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
-
- ac_config_commands="$ac_config_commands po/stamp-it"
-
-
if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
@@ -17935,7 +18680,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
#
# INIT-COMMANDS
#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"
# The HP-UX ksh and POSIX shell print the target directory to stdout
@@ -17951,6 +18696,7 @@ enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
@@ -18000,10 +18746,13 @@ compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
@@ -18068,7 +18817,8 @@ finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
@@ -18119,9 +18869,12 @@ CFLAGS \
compiler \
lt_cv_sys_global_symbol_pipe \
lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
lt_cv_sys_global_symbol_to_c_name_address \
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+lt_cv_nm_interface \
nm_file_list_spec \
+lt_cv_truncate_bin \
lt_prog_compiler_no_builtin_flag \
lt_prog_compiler_pic \
lt_prog_compiler_wl \
@@ -18156,7 +18909,7 @@ old_striplib \
striplib; do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -18183,10 +18936,11 @@ postinstall_cmds \
postuninstall_cmds \
finish_cmds \
sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec; do
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path; do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -18195,19 +18949,16 @@ sys_lib_dlsearch_path_spec; do
done
ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
PACKAGE='$PACKAGE'
VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
RM='$RM'
ofile='$ofile'
@@ -18831,32 +19582,38 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
case $ac_file$ac_mode in
"depfiles":C) test x"$AMDEP_TRUE" != x"" || {
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
+ # TODO: see whether this extra hack can be removed once we start
+ # requiring Autoconf 2.70 or later.
+ case $CONFIG_FILES in #(
+ *\'*) :
+ eval set x "$CONFIG_FILES" ;; #(
+ *) :
+ set x $CONFIG_FILES ;; #(
+ *) :
+ ;;
+esac
shift
- for mf
+ # Used to flag and report bootstrapping failures.
+ am_rc=0
+ for am_mf
do
# Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named 'Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
+ am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile which includes
+ # dependency-tracking related rules and includes.
+ # Grep'ing the whole file directly is not great: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$mf" |
+ sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
+ || continue
+ am_dirpart=`$as_dirname -- "$am_mf" ||
+$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$am_mf" : 'X\(//\)[^/]' \| \
+ X"$am_mf" : 'X\(//\)$' \| \
+ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$am_mf" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
@@ -18874,106 +19631,100 @@ $as_echo X"$mf" |
q
}
s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running 'make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
+ am_filepart=`$as_basename -- "$am_mf" ||
+$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$am_mf" : 'X\(//\)$' \| \
+ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$am_mf" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
- /^X\(\/\/\)$/{
+ /^X\/\(\/\/\)$/{
s//\1/
q
}
- /^X\(\/\).*/{
+ /^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
- as_dir=$dirpart/$fdir; as_fn_mkdir_p
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
+ { echo "$as_me:$LINENO: cd "$am_dirpart" \
+ && sed -e '/# am--include-marker/d' "$am_filepart" \
+ | $MAKE -f - am--depfiles" >&5
+ (cd "$am_dirpart" \
+ && sed -e '/# am--include-marker/d' "$am_filepart" \
+ | $MAKE -f - am--depfiles) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } || am_rc=$?
done
+ if test $am_rc -ne 0; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "Something went wrong bootstrapping makefile fragments
+ for automatic dependency tracking. If GNU make was not used, consider
+ re-running the configure script with MAKE=\"gmake\" (or whatever is
+ necessary). You can also try re-running configure with the
+ '--disable-dependency-tracking' option to at least be able to build
+ the package (albeit without support for automatic dependency tracking).
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ { am_dirpart=; unset am_dirpart;}
+ { am_filepart=; unset am_filepart;}
+ { am_mf=; unset am_mf;}
+ { am_rc=; unset am_rc;}
+ rm -f conftest-deps.mk
}
;;
"libtool":C)
- # See if we are running on zsh, and set the options which allow our
+ # See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
+ if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
- cfgfile="${ofile}T"
+ cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# Generated automatically by $as_me ($PACKAGE) $VERSION
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
-#
-# This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# The names of the tagged configurations supported by this script.
-available_tags=""
+available_tags=''
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
# ### BEGIN LIBTOOL CONFIG
@@ -18993,6 +19744,9 @@ pic_mode=$pic_mode
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL
@@ -19110,18 +19864,27 @@ global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
# Transform the output of nm in a proper C declaration.
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
# Transform the output of nm in a C name address pair.
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
# Specify filename containing input files for \$NM.
nm_file_list_spec=$lt_nm_file_list_spec
-# The root where to search for dependent libraries,and in which our libraries should be installed.
+# The root where to search for dependent libraries,and where our libraries should be installed.
lt_sysroot=$lt_sysroot
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
# The name of the directory that contains temporary libtool files.
objdir=$objdir
@@ -19212,8 +19975,11 @@ hardcode_into_libs=$hardcode_into_libs
# Compile-time system search path for libraries.
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
# Whether dlopen is supported.
dlopen_support=$enable_dlopen
@@ -19306,13 +20072,13 @@ hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute
@@ -19362,6 +20128,65 @@ hardcode_action=$hardcode_action
# ### END LIBTOOL CONFIG
+_LT_EOF
+
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
_LT_EOF
case $host_os in
@@ -19370,7 +20195,7 @@ _LT_EOF
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -19379,7 +20204,7 @@ _LT_EOF
esac
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
# We use sed instead of cat because bash on DJGPP gets confused if
@@ -19389,165 +20214,6 @@ ltmain="$ac_aux_dir/ltmain.sh"
sed '$q' "$ltmain" >> "$cfgfile" \
|| (rm -f "$cfgfile"; exit 1)
- if test x"$xsi_shell" = xyes; then
- sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-func_dirname ()\
-{\
-\ case ${1} in\
-\ */*) func_dirname_result="${1%/*}${2}" ;;\
-\ * ) func_dirname_result="${3}" ;;\
-\ esac\
-} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_basename ()$/,/^} # func_basename /c\
-func_basename ()\
-{\
-\ func_basename_result="${1##*/}"\
-} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-func_dirname_and_basename ()\
-{\
-\ case ${1} in\
-\ */*) func_dirname_result="${1%/*}${2}" ;;\
-\ * ) func_dirname_result="${3}" ;;\
-\ esac\
-\ func_basename_result="${1##*/}"\
-} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-func_stripname ()\
-{\
-\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-\ # positional parameters, so assign one to ordinary parameter first.\
-\ func_stripname_result=${3}\
-\ func_stripname_result=${func_stripname_result#"${1}"}\
-\ func_stripname_result=${func_stripname_result%"${2}"}\
-} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-func_split_long_opt ()\
-{\
-\ func_split_long_opt_name=${1%%=*}\
-\ func_split_long_opt_arg=${1#*=}\
-} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-func_split_short_opt ()\
-{\
-\ func_split_short_opt_arg=${1#??}\
-\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-func_lo2o ()\
-{\
-\ case ${1} in\
-\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-\ *) func_lo2o_result=${1} ;;\
-\ esac\
-} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_xform ()$/,/^} # func_xform /c\
-func_xform ()\
-{\
- func_xform_result=${1%.*}.lo\
-} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_arith ()$/,/^} # func_arith /c\
-func_arith ()\
-{\
- func_arith_result=$(( $* ))\
-} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_len ()$/,/^} # func_len /c\
-func_len ()\
-{\
- func_len_result=${#1}\
-} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-fi
-
-if test x"$lt_shell_append" = xyes; then
- sed -e '/^func_append ()$/,/^} # func_append /c\
-func_append ()\
-{\
- eval "${1}+=\\${2}"\
-} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-func_append_quoted ()\
-{\
-\ func_quote_for_eval "${2}"\
-\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- # Save a `func_append' function call where possible by direct use of '+='
- sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-else
- # Save a `func_append' function call even when '+=' is not available
- sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-fi
-
-
mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
diff --git a/configure.ac b/configure.ac
index 0e8f339..3451989 100644
--- a/configure.ac
+++ b/configure.ac
@@ -601,7 +601,7 @@ AC_ARG_WITH(systemd,
[with_systemd=$withval], [with_systemd=auto])
PKG_CHECK_MODULES(SYSTEMD,
- [libsystemd-login libsystemd-daemon],
+ [libsystemd-login],
[have_systemd=yes], [have_systemd=no])
if test "x$with_systemd" = "xauto" ; then
diff --git a/data/Makefile.in b/data/Makefile.in
index 93ff655..6d028a0 100644
--- a/data/Makefile.in
+++ b/data/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# Makefile.in generated by automake 1.16.4 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -14,23 +14,61 @@
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
- test $$am__dry = yes; \
- }
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
@@ -50,13 +88,12 @@ POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = data
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(top_srcdir)/mkinstalldirs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
@@ -110,6 +147,8 @@ man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)"
NROFF = nroff
MANS = $(man_MANS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ALL_LINGUAS = @ALL_LINGUAS@
@@ -129,6 +168,8 @@ CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DBUS_CFLAGS = @DBUS_CFLAGS@
@@ -143,6 +184,7 @@ ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
+ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
EXPANDED_BINDIR = @EXPANDED_BINDIR@
EXPANDED_DATADIR = @EXPANDED_DATADIR@
@@ -183,6 +225,7 @@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBGNOMEKBDUI_CFLAGS = @LIBGNOMEKBDUI_CFLAGS@
@@ -193,6 +236,7 @@ LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -290,6 +334,7 @@ pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
@@ -332,14 +377,13 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu data/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu data/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -399,29 +443,16 @@ uninstall-man1:
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
+tags TAGS:
-ctags: CTAGS
-CTAGS:
+ctags CTAGS:
cscope cscopelist:
+distdir: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) distdir-am
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically 'make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
+distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -562,16 +593,19 @@ uninstall-man: uninstall-man1
.MAKE: install-am install-data-am install-strip
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- distclean distclean-generic distclean-libtool distdir dvi \
- dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-data-hook install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man1 install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
- ps ps-am uninstall uninstall-am uninstall-man uninstall-man1
+ cscopelist-am ctags-am distclean distclean-generic \
+ distclean-libtool distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am \
+ install-data-hook install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-man1 install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
+ uninstall-am uninstall-man uninstall-man1
+
+.PRECIOUS: Makefile
@INTLTOOL_XML_NOMERGE_RULE@
diff --git a/debian/changelog b/debian/changelog
index c267ec6..10bee6a 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,13 @@
+gnome-screensaver (3.6.1+git20161121.1.688572a-1) UNRELEASED; urgency=low
+
+ * New upstream snapshot.
+ * Drop patch 00git_logind_check.patch, present upstream.
+ * Drop patch 01_no_autostart.patch, present upstream.
+ * Drop patch 0001-gs-lock-plug-Disconnect-signal-handler-from-right-ob.patch,
+ present upstream.
+
+ -- Debian Janitor <janitor@jelmer.uk> Wed, 08 Feb 2023 15:43:57 -0000
+
gnome-screensaver (3.6.1-13) unstable; urgency=medium
* Build-Depend on debhelper-compat 12
diff --git a/debian/patches/0001-gs-lock-plug-Disconnect-signal-handler-from-right-ob.patch b/debian/patches/0001-gs-lock-plug-Disconnect-signal-handler-from-right-ob.patch
deleted file mode 100644
index 90636eb..0000000
--- a/debian/patches/0001-gs-lock-plug-Disconnect-signal-handler-from-right-ob.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Iain Lane <iain@orangesquash.org.uk>
-Date: Thu, 16 Jul 2015 16:09:19 +0200
-Subject: [PATCH] gs-lock-plug: Disconnect signal handler from right object
-
-It's connected to a GdkKeymap, not a GSLockPlug.
-
-https://bugzilla.gnome.org/show_bug.cgi?id=752202
----
- src/gs-lock-plug.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/src/gs-lock-plug.c b/src/gs-lock-plug.c
-index 4552646..9cadedb 100644
---- a/src/gs-lock-plug.c
-+++ b/src/gs-lock-plug.c
-@@ -483,7 +483,7 @@ gs_lock_plug_run (GSLockPlug *plug)
- g_signal_handler_disconnect (plug, unmap_handler);
- g_signal_handler_disconnect (plug, delete_handler);
- g_signal_handler_disconnect (plug, destroy_handler);
-- g_signal_handler_disconnect (plug, keymap_handler);
-+ g_signal_handler_disconnect (keymap, keymap_handler);
- }
-
- g_object_unref (plug);
diff --git a/debian/patches/00git_logind_check.patch b/debian/patches/00git_logind_check.patch
deleted file mode 100644
index 9a6e577..0000000
--- a/debian/patches/00git_logind_check.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From: Martin Pitt <martinpitt@gnome.org>
-Date: Thu, 21 Mar 2013 10:24:20 +0000
-Subject: Check for logind, not for systemd
-
-It is possible to build systemd without logind, in which case
-/sys/fs/cgroup/systemd would still exist. Check for /run/systemd/seats instead,
-as recommended by systemd upstream.
-
-For details, see:
-<https://mail.gnome.org/archives/desktop-devel-list/2013-March/msg00092.html>
-
-Drop the now unnecessary linking against libsystemd-daemon.
-
-https://bugzilla.gnome.org/show_bug.cgi?id=696264
----
- configure.ac | 2 +-
- src/gs-listener-dbus.c | 5 +++--
- 2 files changed, 4 insertions(+), 3 deletions(-)
-
-diff --git a/configure.ac b/configure.ac
-index 0e8f339..3451989 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -601,7 +601,7 @@ AC_ARG_WITH(systemd,
- [with_systemd=$withval], [with_systemd=auto])
-
- PKG_CHECK_MODULES(SYSTEMD,
-- [libsystemd-login libsystemd-daemon],
-+ [libsystemd-login],
- [have_systemd=yes], [have_systemd=no])
-
- if test "x$with_systemd" = "xauto" ; then
-diff --git a/src/gs-listener-dbus.c b/src/gs-listener-dbus.c
-index 56afdc0..b8f3376 100644
---- a/src/gs-listener-dbus.c
-+++ b/src/gs-listener-dbus.c
-@@ -25,6 +25,7 @@
- #include <stdio.h>
- #include <time.h>
- #include <string.h>
-+#include <unistd.h>
-
- #include <glib/gi18n.h>
-
-@@ -33,7 +34,6 @@
- #include <dbus/dbus-glib-lowlevel.h>
-
- #ifdef WITH_SYSTEMD
--#include <systemd/sd-daemon.h>
- #include <systemd/sd-login.h>
- #endif
-
-@@ -1479,7 +1479,8 @@ gs_listener_init (GSListener *listener)
- listener->priv = GS_LISTENER_GET_PRIVATE (listener);
-
- #ifdef WITH_SYSTEMD
-- listener->priv->have_systemd = sd_booted () > 0;
-+ /* check if logind is running */
-+ listener->priv->have_systemd = (access("/run/systemd/seats/", F_OK) >= 0);
- #endif
-
- gs_listener_dbus_init (listener);
diff --git a/debian/patches/01_no_autostart.patch b/debian/patches/01_no_autostart.patch
deleted file mode 100644
index 68f2e08..0000000
--- a/debian/patches/01_no_autostart.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From: Tim Lunn <tim@feathertop.org>
-Date: Fri, 19 Oct 2012 10:08:56 +1100
-Subject: move gnome-screensaver desktop file out of autostart
-
-https://bugzilla.gnome.org/show_bug.cgi?id=683060
-(cherry picked from commit 1940dc6bc8ad5ee2c029714efb1276c05ca80bd4)
----
- src/Makefile.am | 2 +-
- src/gnome-screensaver.desktop.in.in | 1 -
- 2 files changed, 1 insertion(+), 2 deletions(-)
-
-diff --git a/src/Makefile.am b/src/Makefile.am
-index 1dd5d46..97ffa07 100644
---- a/src/Makefile.am
-+++ b/src/Makefile.am
-@@ -47,7 +47,7 @@ noinst_PROGRAMS = \
- test-window \
- $(NULL)
-
--desktopdir = $(sysconfdir)/xdg/autostart
-+desktopdir = $(datadir)/applications
- desktop_in_files = gnome-screensaver.desktop.in
- desktop_DATA = $(desktop_in_files:.desktop.in=.desktop)
- @INTLTOOL_DESKTOP_RULE@
-diff --git a/src/gnome-screensaver.desktop.in.in b/src/gnome-screensaver.desktop.in.in
-index fae80c4..82d6d6f 100644
---- a/src/gnome-screensaver.desktop.in.in
-+++ b/src/gnome-screensaver.desktop.in.in
-@@ -5,7 +5,6 @@ _Comment=Launch screensaver and locker program
- Icon=preferences-desktop-screensaver
- Exec=gnome-screensaver
- OnlyShowIn=GNOME;
--AutostartCondition=GNOME3 if-session gnome-fallback
- NoDisplay=true
- X-GNOME-Autostart-Phase=Application
- X-GNOME-Autostart-Notify=true
diff --git a/debian/patches/14_no_fade_on_user_switch.patch b/debian/patches/14_no_fade_on_user_switch.patch
index d42d7da..de7d90e 100644
--- a/debian/patches/14_no_fade_on_user_switch.patch
+++ b/debian/patches/14_no_fade_on_user_switch.patch
@@ -9,10 +9,10 @@ Forwarded: not-needed
src/gs-manager.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/src/gs-manager.c b/src/gs-manager.c
-index ed3c1b9..32c2305 100644
---- a/src/gs-manager.c
-+++ b/src/gs-manager.c
+Index: gnome-screensaver.git/src/gs-manager.c
+===================================================================
+--- gnome-screensaver.git.orig/src/gs-manager.c
++++ gnome-screensaver.git/src/gs-manager.c
@@ -1268,7 +1268,7 @@ gs_manager_activate (GSManager *manager)
manager->priv->active = TRUE;
diff --git a/debian/patches/31_lock_screen_on_suspend.patch b/debian/patches/31_lock_screen_on_suspend.patch
index 2bd2603..61c075e 100644
--- a/debian/patches/31_lock_screen_on_suspend.patch
+++ b/debian/patches/31_lock_screen_on_suspend.patch
@@ -10,11 +10,11 @@ to do so). This mirrors what gnome-shell's screensaver does.
src/gs-monitor.c | 16 ++++++++++++++++
3 files changed, 45 insertions(+)
-diff --git a/src/gs-listener-dbus.c b/src/gs-listener-dbus.c
-index b8f3376..7c20513 100644
---- a/src/gs-listener-dbus.c
-+++ b/src/gs-listener-dbus.c
-@@ -83,6 +83,7 @@ struct GSListenerPrivate
+Index: gnome-screensaver.git/src/gs-listener-dbus.c
+===================================================================
+--- gnome-screensaver.git.orig/src/gs-listener-dbus.c
++++ gnome-screensaver.git/src/gs-listener-dbus.c
+@@ -82,6 +82,7 @@ struct GSListenerPrivate
enum {
LOCK,
@@ -22,11 +22,10 @@ index b8f3376..7c20513 100644
QUIT,
SIMULATE_USER_ACTIVITY,
ACTIVE_CHANGED,
-@@ -871,6 +872,17 @@ listener_dbus_handle_system_message (DBusConnection *connection,
- g_signal_emit (listener, signals [LOCK], 0);
+@@ -871,6 +872,17 @@ listener_dbus_handle_system_message (DBu
}
-+ return DBUS_HANDLER_RESULT_HANDLED;
+ return DBUS_HANDLER_RESULT_HANDLED;
+ } else if (dbus_message_is_signal (message, SYSTEMD_LOGIND_INTERFACE, "PrepareForSleep")) {
+ gboolean active;
+ if (dbus_message_get_args (message, NULL,
@@ -37,10 +36,11 @@ index b8f3376..7c20513 100644
+ } else {
+ gs_debug ("cannot parse PrepareForSleep");
+ }
- return DBUS_HANDLER_RESULT_HANDLED;
++ return DBUS_HANDLER_RESULT_HANDLED;
} else if (dbus_message_is_signal (message, DBUS_INTERFACE_PROPERTIES, "PropertiesChanged")) {
-@@ -1186,6 +1198,16 @@ gs_listener_class_init (GSListenerClass *klass)
+ if (_listener_message_path_is_our_session (listener, message)) {
+@@ -1185,6 +1197,16 @@ gs_listener_class_init (GSListenerClass
g_cclosure_marshal_VOID__VOID,
G_TYPE_NONE,
0);
@@ -57,7 +57,7 @@ index b8f3376..7c20513 100644
signals [QUIT] =
g_signal_new ("quit",
G_TYPE_FROM_CLASS (object_class),
-@@ -1371,6 +1393,12 @@ gs_listener_acquire (GSListener *listener,
+@@ -1370,6 +1392,12 @@ gs_listener_acquire (GSListener *listene
",interface='"DBUS_INTERFACE_PROPERTIES"'"
",member='PropertiesChanged'",
NULL);
@@ -70,10 +70,10 @@ index b8f3376..7c20513 100644
return (res != -1);
}
-diff --git a/src/gs-listener-dbus.h b/src/gs-listener-dbus.h
-index 1cb92bc..57ae928 100644
---- a/src/gs-listener-dbus.h
-+++ b/src/gs-listener-dbus.h
+Index: gnome-screensaver.git/src/gs-listener-dbus.h
+===================================================================
+--- gnome-screensaver.git.orig/src/gs-listener-dbus.h
++++ gnome-screensaver.git/src/gs-listener-dbus.h
@@ -45,6 +45,7 @@ typedef struct
GObjectClass parent_class;
@@ -82,15 +82,14 @@ index 1cb92bc..57ae928 100644
void (* quit) (GSListener *listener);
void (* simulate_user_activity) (GSListener *listener);
gboolean (* active_changed) (GSListener *listener,
-diff --git a/src/gs-monitor.c b/src/gs-monitor.c
-index 6e43a2b..7bc872c 100644
---- a/src/gs-monitor.c
-+++ b/src/gs-monitor.c
-@@ -209,6 +209,19 @@ listener_lock_cb (GSListener *listener,
-
+Index: gnome-screensaver.git/src/gs-monitor.c
+===================================================================
+--- gnome-screensaver.git.orig/src/gs-monitor.c
++++ gnome-screensaver.git/src/gs-monitor.c
+@@ -210,6 +210,19 @@ listener_lock_cb (GSListener *listener,
}
-+static void
+ static void
+listener_config_lock_cb (GSListener *listener,
+ GSMonitor *monitor)
+{
@@ -103,9 +102,10 @@ index 6e43a2b..7bc872c 100644
+
+}
+
- static void
++static void
listener_quit_cb (GSListener *listener,
GSMonitor *monitor)
+ {
@@ -328,6 +341,7 @@ static void
disconnect_listener_signals (GSMonitor *monitor)
{
@@ -114,7 +114,7 @@ index 6e43a2b..7bc872c 100644
g_signal_handlers_disconnect_by_func (monitor->priv->listener, listener_quit_cb, monitor);
g_signal_handlers_disconnect_by_func (monitor->priv->listener, listener_active_changed_cb, monitor);
g_signal_handlers_disconnect_by_func (monitor->priv->listener, listener_simulate_user_activity_cb, monitor);
-@@ -339,6 +353,8 @@ connect_listener_signals (GSMonitor *monitor)
+@@ -339,6 +353,8 @@ connect_listener_signals (GSMonitor *mon
{
g_signal_connect (monitor->priv->listener, "lock",
G_CALLBACK (listener_lock_cb), monitor);
diff --git a/debian/patches/cross.patch b/debian/patches/cross.patch
index 14a790c..cd52c64 100644
--- a/debian/patches/cross.patch
+++ b/debian/patches/cross.patch
@@ -6,10 +6,10 @@ Subject: Use triplet-prefixed pkg-config
configure.ac | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/configure.ac b/configure.ac
-index 93e31e0..6742dff 100644
---- a/configure.ac
-+++ b/configure.ac
+Index: gnome-screensaver.git/configure.ac
+===================================================================
+--- gnome-screensaver.git.orig/configure.ac
++++ gnome-screensaver.git/configure.ac
@@ -102,7 +102,7 @@ AC_SUBST(GNOME_SCREENSAVER_SAVER_LIBS)
# Find out the version of DBUS we're using
diff --git a/debian/patches/libsystemd.patch b/debian/patches/libsystemd.patch
index f5861ab..ec31345 100644
--- a/debian/patches/libsystemd.patch
+++ b/debian/patches/libsystemd.patch
@@ -8,10 +8,10 @@ Last-Update: 2015-07-06
configure.ac | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/configure.ac b/configure.ac
-index 3451989..93e31e0 100644
---- a/configure.ac
-+++ b/configure.ac
+Index: gnome-screensaver.git/configure.ac
+===================================================================
+--- gnome-screensaver.git.orig/configure.ac
++++ gnome-screensaver.git/configure.ac
@@ -601,7 +601,7 @@ AC_ARG_WITH(systemd,
[with_systemd=$withval], [with_systemd=auto])
diff --git a/debian/patches/manager-adapt-to-gnome-desktop-API-changes.patch b/debian/patches/manager-adapt-to-gnome-desktop-API-changes.patch
index 7e0afb0..c243711 100644
--- a/debian/patches/manager-adapt-to-gnome-desktop-API-changes.patch
+++ b/debian/patches/manager-adapt-to-gnome-desktop-API-changes.patch
@@ -8,11 +8,11 @@ Origin: https://gitlab.gnome.org/Archive/gnome-screensaver/-/merge_requests/1
src/gs-manager.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
-diff --git a/src/gs-manager.c b/src/gs-manager.c
-index 32c2305..b24d628 100644
---- a/src/gs-manager.c
-+++ b/src/gs-manager.c
-@@ -820,8 +820,7 @@ apply_background_to_window (GSManager *manager,
+Index: gnome-screensaver.git/src/gs-manager.c
+===================================================================
+--- gnome-screensaver.git.orig/src/gs-manager.c
++++ gnome-screensaver.git/src/gs-manager.c
+@@ -820,8 +820,7 @@ apply_background_to_window (GSManager *m
surface = gnome_bg_create_surface (manager->priv->bg,
gdk_window,
width,
diff --git a/debian/patches/series b/debian/patches/series
index 263d9eb..3b308b1 100644
--- a/debian/patches/series
+++ b/debian/patches/series
@@ -1,8 +1,5 @@
-00git_logind_check.patch
-01_no_autostart.patch
14_no_fade_on_user_switch.patch
31_lock_screen_on_suspend.patch
libsystemd.patch
-0001-gs-lock-plug-Disconnect-signal-handler-from-right-ob.patch
cross.patch
manager-adapt-to-gnome-desktop-API-changes.patch
diff --git a/depcomp b/depcomp
index 25a39e6..715e343 100755
--- a/depcomp
+++ b/depcomp
@@ -1,10 +1,9 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2012-03-27.16; # UTC
+scriptversion=2018-03-07.03; # UTC
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
+# Copyright (C) 1999-2021 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -17,7 +16,7 @@ scriptversion=2012-03-27.16; # UTC
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# along with this program. If not, see <https://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -28,9 +27,9 @@ scriptversion=2012-03-27.16; # UTC
case $1 in
'')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
- exit 1;
- ;;
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
@@ -57,11 +56,65 @@ EOF
;;
esac
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'. Note that this directory component will
+# be either empty or ending with a '/' character. This is deliberate.
+set_dir_from ()
+{
+ case $1 in
+ */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+ *) dir=;;
+ esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+ base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+ echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+ # If the compiler actually managed to produce a dependency file,
+ # post-process it.
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form 'foo.o: dependency.h'.
+ # Do two passes, one to just change these to
+ # $object: dependency.h
+ # and one to simply output
+ # dependency.h:
+ # which is needed to avoid the deleted-header problem.
+ { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+ sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+ } > "$depfile"
+ rm -f "$tmpdepfile"
+ else
+ make_dummy_depfile
+ fi
+}
+
# A tabulation character.
tab=' '
# A newline character.
nl='
'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
@@ -75,6 +128,9 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
@@ -86,32 +142,32 @@ if test "$depmode" = hp; then
fi
if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvisualcpp
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
fi
if test "$depmode" = msvc7msys; then
- # This is just like msvc7 but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvc7
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
fi
if test "$depmode" = xlc; then
- # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
- gccflag=-qmakedep=gcc,-MF
- depmode=gcc
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
fi
case "$depmode" in
@@ -134,8 +190,7 @@ gcc3)
done
"$@"
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -143,13 +198,17 @@ gcc3)
;;
gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
+## -MM, not -M (despite what the docs say). Also, it might not be
+## supported by the other compilers which use the 'gcc' depmode.
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
@@ -157,15 +216,14 @@ gcc)
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
+ # The second -e expression handles DOS-style file names with drive
+ # letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the "deleted header file" problem.
@@ -174,15 +232,15 @@ gcc)
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
- tr ' ' "$nl" < "$tmpdepfile" |
## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -200,8 +258,7 @@ sgi)
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -209,7 +266,6 @@ sgi)
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
-
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
@@ -217,19 +273,15 @@ sgi)
# the IRIX cc adds comments like '#:fec' to the end of the
# dependency line.
tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr "$nl" ' ' >> "$depfile"
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+ | tr "$nl" ' ' >> "$depfile"
echo >> "$depfile"
-
# The second pass generates a dummy entry for each header file.
tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
+ make_dummy_depfile
fi
rm -f "$tmpdepfile"
;;
@@ -247,9 +299,8 @@ aix)
# current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ set_dir_from "$object"
+ set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
@@ -262,9 +313,7 @@ aix)
"$@" -M
fi
stat=$?
-
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
@@ -273,65 +322,113 @@ aix)
do
test -f "$tmpdepfile" && break
done
- if test -f "$tmpdepfile"; then
- # Each line is of the form 'foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
+ aix_post_process_depfile
+ ;;
+
+tcc)
+ # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+ # FIXME: That version still under development at the moment of writing.
+ # Make that this statement remains true also for stable, released
+ # versions.
+ # It will wrap lines (doesn't matter whether long or short) with a
+ # trailing '\', as in:
+ #
+ # foo.o : \
+ # foo.c \
+ # foo.h \
+ #
+ # It will put a trailing '\' even on the last line, and will use leading
+ # spaces rather than leading tabs (at least since its commit 0394caf7
+ # "Emit spaces for -MD").
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
fi
+ rm -f "$depfile"
+ # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+ # We have to change lines of the first kind to '$object: \'.
+ sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+ # And for each line of the second kind, we have to emit a 'dep.h:'
+ # dummy dependency, to avoid the deleted-header problem.
+ sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
-icc)
- # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
- # However on
- # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file. A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+ # Portland's C compiler understands '-MD'.
+ # Will always output deps to 'file.d' where file is the root name of the
+ # source file under compilation, even if file resides in a subdirectory.
+ # The object file name does not affect the name of the '.d' file.
+ # pgcc 10.2 will output
# foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using '\':
+ # and will wrap long lines using '\' :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
- # tcc 0.9.26 (FIXME still under development at the moment of writing)
- # will emit a similar output, but also prepend the continuation lines
- # with horizontal tabulation characters.
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
+ set_dir_from "$object"
+ # Use the source, not the object, to determine the base name, since
+ # that's sadly what pgcc will do too.
+ set_base_from "$source"
+ tmpdepfile=$base.d
+
+ # For projects that build the same source file twice into different object
+ # files, the pgcc approach of using the *source* file root name can cause
+ # problems in parallel builds. Use a locking strategy to avoid stomping on
+ # the same $tmpdepfile.
+ lockdir=$base.d-lock
+ trap "
+ echo '$0: caught signal, cleaning up...' >&2
+ rmdir '$lockdir'
+ exit 1
+ " 1 2 13 15
+ numtries=100
+ i=$numtries
+ while test $i -gt 0; do
+ # mkdir is a portable test-and-set.
+ if mkdir "$lockdir" 2>/dev/null; then
+ # This process acquired the lock.
+ "$@" -MD
+ stat=$?
+ # Release the lock.
+ rmdir "$lockdir"
+ break
+ else
+ # If the lock is being held by a different process, wait
+ # until the winning process is done or we timeout.
+ while test -d "$lockdir" && test $i -gt 0; do
+ sleep 1
+ i=`expr $i - 1`
+ done
+ fi
+ i=`expr $i - 1`
+ done
+ trap - 1 2 13 15
+ if test $i -le 0; then
+ echo "$0: failed to acquire lock after $numtries attempts" >&2
+ echo "$0: check lockdir '$lockdir'" >&2
+ exit 1
+ fi
+
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
- # Each line is of the form 'foo.o: dependent.h',
- # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
- < "$tmpdepfile" > "$depfile"
- sed '
- s/[ '"$tab"'][ '"$tab"']*/ /g
- s/^ *//
- s/ *\\*$//
- s/^[^:]*: *//
- /^$/d
- /:$/d
- s/$/ :/
- ' < "$tmpdepfile" >> "$depfile"
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -342,9 +439,8 @@ hp2)
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ set_dir_from "$object"
+ set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
@@ -355,8 +451,7 @@ hp2)
"$@" +Maked
fi
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
@@ -366,76 +461,61 @@ hp2)
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
# Add 'dependent.h:' lines.
sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
else
- echo "#dummy" > "$depfile"
+ make_dummy_depfile
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in 'foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- # With Tru64 cc, shared objects can also be used to make a
- # static library. This mechanism is used in libtool 1.4 series to
- # handle both shared and static libraries in a single compilation.
- # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
- #
- # With libtool 1.5 this exception was removed, and libtool now
- # generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
- tmpdepfile2=$dir$base.o.d # libtool 1.5
- tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
- tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.o.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- tmpdepfile4=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in 'foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ set_dir_from "$object"
+ set_base_from "$object"
+
+ if test "$libtool" = yes; then
+ # Libtool generates 2 separate objects for the 2 libraries. These
+ # two compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir$base.o.d # libtool 1.5
+ tmpdepfile2=$dir.libs/$base.o.d # Likewise.
+ tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ # Same post-processing that is required for AIX mode.
+ aix_post_process_depfile
+ ;;
msvc7)
if test "$libtool" = yes; then
@@ -446,8 +526,7 @@ msvc7)
"$@" $showIncludes > "$tmpdepfile"
stat=$?
grep -v '^Note: including file: ' "$tmpdepfile"
- if test "$stat" = 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -473,6 +552,7 @@ $ {
G
p
}' >> "$depfile"
+ echo >> "$depfile" # make sure the fragment doesn't end with a backslash
rm -f "$tmpdepfile"
;;
@@ -524,13 +604,14 @@ dashmstdout)
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
- sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+ sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
- tr ' ' "$nl" < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this sed invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -583,10 +664,12 @@ makedepend)
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process the last invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed '1,2d' "$tmpdepfile" \
+ | tr ' ' "$nl" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
@@ -622,10 +705,10 @@ cpp)
esac
done
- "$@" -E |
- sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
+ "$@" -E \
+ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ | sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
@@ -657,15 +740,15 @@ msvisualcpp)
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
+ set fnord "$@"
+ shift
+ shift
+ ;;
*)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
esac
done
"$@" -E 2>/dev/null |
@@ -700,9 +783,9 @@ exit 0
# Local Variables:
# mode: shell-script
# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
diff --git a/doc/Makefile.in b/doc/Makefile.in
index ffd46a4..4d759c1 100644
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# Makefile.in generated by automake 1.16.4 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -15,23 +15,61 @@
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
- test $$am__dry = yes; \
- }
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
@@ -51,13 +89,12 @@ POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = doc
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/gnome-screensaver.xml.in $(top_srcdir)/mkinstalldirs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = gnome-screensaver.xml
CONFIG_CLEAN_VPATH_FILES =
@@ -109,6 +146,9 @@ am__uninstall_files_from_dir = { \
}
am__installdirs = "$(DESTDIR)$(htmldocdir)"
DATA = $(htmldoc_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(srcdir)/gnome-screensaver.xml.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ALL_LINGUAS = @ALL_LINGUAS@
@@ -128,6 +168,8 @@ CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DBUS_CFLAGS = @DBUS_CFLAGS@
@@ -142,6 +184,7 @@ ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
+ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
EXPANDED_BINDIR = @EXPANDED_BINDIR@
EXPANDED_DATADIR = @EXPANDED_DATADIR@
@@ -182,6 +225,7 @@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBGNOMEKBDUI_CFLAGS = @LIBGNOMEKBDUI_CFLAGS@
@@ -192,6 +236,7 @@ LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -289,6 +334,7 @@ pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
@@ -326,14 +372,13 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu doc/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -373,16 +418,16 @@ uninstall-htmldocDATA:
@list='$(htmldoc_DATA)'; test -n "$(htmldocdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(htmldocdir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
+tags TAGS:
-ctags: CTAGS
-CTAGS:
+ctags CTAGS:
cscope cscopelist:
+distdir: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) distdir-am
-distdir: $(DISTFILES)
+distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -518,17 +563,19 @@ uninstall-am: uninstall-htmldocDATA
.MAKE: install-am install-strip
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local distclean distclean-generic distclean-libtool \
- distdir dvi dvi-am html html-am info info-am install \
- install-am install-data install-data-am install-dvi \
+ clean-local cscopelist-am ctags-am distclean distclean-generic \
+ distclean-libtool distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-htmldocDATA install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
- uninstall-htmldocDATA
+ mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
+ uninstall-am uninstall-htmldocDATA
+
+.PRECIOUS: Makefile
@DOCBOOK_DOCS_ENABLED_TRUE@gnome-screensaver.html : dbus-interface.xml
diff --git a/install-sh b/install-sh
index a9244eb..ec298b5 100755
--- a/install-sh
+++ b/install-sh
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2011-01-19.21; # UTC
+scriptversion=2020-11-14.01; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,25 +35,21 @@ scriptversion=2011-01-19.21; # UTC
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
+tab=' '
nl='
'
-IFS=" "" $nl"
+IFS=" $tab$nl"
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
-# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
+doit_exec=${doit:-exec}
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
@@ -68,22 +64,16 @@ mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
-
posix_mkdir=
# Desired mode of installed file.
mode=0755
+# Create dirs (including intermediate dirs) using mode 755.
+# This is like GNU 'install' as of coreutils 8.32 (2020).
+mkdir_umask=22
+
+backupsuffix=
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
@@ -97,7 +87,7 @@ dir_arg=
dst_arg=
copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
@@ -114,18 +104,28 @@ Options:
--version display version info and exit.
-c (ignored)
- -C install only if different (preserve the last data modification time)
+ -C install only if different (preserve data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
+ -p pass -p to $cpprog.
-s $stripprog installed files.
+ -S SUFFIX attempt to back up existing files, with suffix SUFFIX.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
RMPROG STRIPPROG
+
+By default, rm is invoked with -f; when overridden with RMPROG,
+it's up to you to specify -f if you want it.
+
+If -S is not specified, no backups are attempted.
+
+Email bug reports to bug-automake@gnu.org.
+Automake home page: https://www.gnu.org/software/automake/
"
while test $# -ne 0; do
@@ -137,46 +137,62 @@ while test $# -ne 0; do
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
- shift;;
+ shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
+ case $mode in
+ *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
-o) chowncmd="$chownprog $2"
- shift;;
+ shift;;
+
+ -p) cpprog="$cpprog -p";;
-s) stripcmd=$stripprog;;
- -t) dst_arg=$2
- # Protect names problematic for `test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
- shift;;
+ -S) backupsuffix="$2"
+ shift;;
- -T) no_target_directory=true;;
+ -t)
+ is_target_a_directory=always
+ dst_arg=$2
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
+
+ -T) is_target_a_directory=never;;
--version) echo "$0 $scriptversion"; exit $?;;
- --) shift
- break;;
+ --) shift
+ break;;
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
*) break;;
esac
shift
done
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+ if test -n "$dst_arg"; then
+ echo "$0: target directory not allowed when installing a directory." >&2
+ exit 1
+ fi
+fi
+
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
@@ -190,7 +206,7 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
fi
shift # arg
dst_arg=$arg
- # Protect names problematic for `test' and other utilities.
+ # Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
@@ -202,11 +218,20 @@ if test $# -eq 0; then
echo "$0: no input file specified." >&2
exit 1
fi
- # It's OK to call `install-sh -d' without argument.
+ # It's OK to call 'install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
+if test -z "$dir_arg"; then
+ if test $# -gt 1 || test "$is_target_a_directory" = always; then
+ if test ! -d "$dst_arg"; then
+ echo "$0: $dst_arg: Is not a directory." >&2
+ exit 1
+ fi
+ fi
+fi
+
if test -z "$dir_arg"; then
do_exit='(exit $ret); exit $ret'
trap "ret=129; $do_exit" 1
@@ -223,16 +248,16 @@ if test -z "$dir_arg"; then
*[0-7])
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw='% 200'
+ u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw=,u+rw
+ u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
@@ -240,7 +265,7 @@ fi
for src
do
- # Protect names problematic for `test' and other utilities.
+ # Protect names problematic for 'test' and other utilities.
case $src in
-* | [=\(\)!]) src=./$src;;
esac
@@ -250,6 +275,10 @@ do
dstdir=$dst
test -d "$dstdir"
dstdir_status=$?
+ # Don't chown directories that already exist.
+ if test $dstdir_status = 0; then
+ chowncmd=""
+ fi
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
@@ -266,178 +295,148 @@ do
fi
dst=$dst_arg
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
+ # If destination is a directory, append the input filename.
if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
+ if test "$is_target_a_directory" = never; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
fi
dstdir=$dst
- dst=$dstdir/`basename "$src"`
+ dstbase=`basename "$src"`
+ case $dst in
+ */) dst=$dst$dstbase;;
+ *) dst=$dst/$dstbase;;
+ esac
dstdir_status=0
else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
+ dstdir=`dirname "$dst"`
test -d "$dstdir"
dstdir_status=$?
fi
fi
+ case $dstdir in
+ */) dstdirslash=$dstdir;;
+ *) dstdirslash=$dstdir/;;
+ esac
+
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ # The $RANDOM variable is not portable (e.g., dash). Use it
+ # here however when possible just to lower collision chance.
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+
+ trap '
+ ret=$?
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
+ exit $ret
+ ' 0
+
+ # Because "mkdir -p" follows existing symlinks and we likely work
+ # directly in world-writeable /tmp, make sure that the '$tmpdir'
+ # directory is successfully created first before we actually test
+ # 'mkdir -p'.
+ if (umask $mkdir_umask &&
+ $mkdirprog $mkdir_mode "$tmpdir" &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ test_tmpdir="$tmpdir/a"
+ ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
else
- mkdir_mode=
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writeable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
+ trap '' 0;;
esac
if
$posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
- # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) prefix='/';;
- [-=\(\)!]*) prefix='./';;
- *) prefix='';;
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
esac
- eval "$initialize_posix_glob"
-
oIFS=$IFS
IFS=/
- $posix_glob set -f
+ set -f
set fnord $dstdir
shift
- $posix_glob set +f
+ set +f
IFS=$oIFS
prefixes=
for d
do
- test X"$d" = X && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
+ test X"$d" = X && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
done
if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
fi
fi
fi
@@ -450,14 +449,25 @@ do
else
# Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
+ dsttmp=${dstdirslash}_inst.$$_
+ rmtmp=${dstdirslash}_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+ (umask $cp_umask &&
+ { test -z "$stripcmd" || {
+ # Create $dsttmp read-write so that cp doesn't create it read-only,
+ # which would cause strip to fail.
+ if test -z "$doit"; then
+ : >"$dsttmp" # No need to fork-exec 'touch'.
+ else
+ $doit touch "$dsttmp"
+ fi
+ }
+ } &&
+ $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
@@ -472,20 +482,24 @@ do
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+ set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
+ set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
rm -f "$dsttmp"
else
+ # If $backupsuffix is set, and the file being installed
+ # already exists, attempt a backup. Don't worry if it fails,
+ # e.g., if mv doesn't support -f.
+ if test -n "$backupsuffix" && test -f "$dst"; then
+ $doit $mvcmd -f "$dst" "$dst$backupsuffix" 2>/dev/null
+ fi
+
# Rename the file to the real destination.
$doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
@@ -493,24 +507,24 @@ do
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
@@ -519,9 +533,9 @@ do
done
# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
diff --git a/ltmain.sh b/ltmain.sh
old mode 100644
new mode 100755
index 63ae69d..21e5e07
--- a/ltmain.sh
+++ b/ltmain.sh
@@ -1,9 +1,12 @@
+#! /bin/sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+## by inline-source v2014-01-03.01
-# libtool (GNU libtool) 2.4.2
+# libtool (GNU libtool) 2.4.6
+# Provide generalized library-building support services.
# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 1996-2015 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
@@ -23,881 +26,2185 @@
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-# --config show all configuration variables
-# --debug enable verbose shell tracing
-# -n, --dry-run display commands without modifying any files
-# --features display basic configuration information and exit
-# --mode=MODE use operation mode MODE
-# --preserve-dup-deps don't remove duplicate dependency libraries
-# --quiet, --silent don't print informational messages
-# --no-quiet, --no-silent
-# print informational messages (default)
-# --no-warn don't display warning messages
-# --tag=TAG use configuration variables from tag TAG
-# -v, --verbose print more informational messages than default
-# --no-verbose don't print the extra informational messages
-# --version print version information
-# -h, --help, --help-all print short, long, or detailed help message
-#
-# MODE must be one of the following:
-#
-# clean remove files from the build directory
-# compile compile a source file into a libtool object
-# execute automatically set library path, then run a program
-# finish complete the installation of libtool libraries
-# install install libraries or executables
-# link create a library or an executable
-# uninstall remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE. When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-# host-triplet: $host
-# shell: $SHELL
-# compiler: $LTCC
-# compiler flags: $LTCFLAGS
-# linker: $LD (gnu? $with_gnu_ld)
-# $progname: (GNU libtool) 2.4.2
-# automake: $automake_version
-# autoconf: $autoconf_version
-#
-# Report bugs to <bug-libtool@gnu.org>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
PROGRAM=libtool
PACKAGE=libtool
-VERSION=2.4.2
-TIMESTAMP=""
-package_revision=1.3337
+VERSION="2.4.6 Debian-2.4.6-15"
+package_revision=2.4.6
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2015-01-20.17; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# Copyright (C) 2004-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# As a special exception to the GNU General Public License, if you distribute
+# this file as part of a program or library that is built using GNU Libtool,
+# you may include this file under the same distribution terms that you use
+# for the rest of that program.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
- eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-# NLS nuisances: We save the old values to restore during execute mode.
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
- eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- $lt_var=C
- export $lt_var
- lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
- lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ eval "if test set = \"\${$_G_var+set}\"; then
+ save_$_G_var=\$$_G_var
+ $_G_var=C
+ export $_G_var
+ _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+ _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
fi"
done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
-$lt_unset CDPATH
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp $nl"
+
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
+
+
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+}
+
+
+# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+ _G_progs_list=$1
+ _G_check_func=$2
+ _G_PATH=${3-"$PATH"}
+
+ _G_path_prog_max=0
+ _G_path_prog_found=false
+ _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+ for _G_dir in $_G_PATH; do
+ IFS=$_G_save_IFS
+ test -z "$_G_dir" && _G_dir=.
+ for _G_prog_name in $_G_progs_list; do
+ for _exeext in '' .EXE; do
+ _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+ func_executable_p "$_G_path_prog" || continue
+ case `"$_G_path_prog" --version 2>&1` in
+ *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+ *) $_G_check_func $_G_path_prog
+ func_path_progs_result=$func_check_prog_result
+ ;;
+ esac
+ $_G_path_prog_found && break 3
+ done
+ done
+ done
+ IFS=$_G_save_IFS
+ test -z "$func_path_progs_result" && {
+ echo "no acceptable sed could be found in \$PATH" >&2
+ exit 1
+ }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+ _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for _G_i in 1 2 3 4 5 6 7; do
+ _G_sed_script=$_G_sed_script$nl$_G_sed_script
+ done
+ echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+ _G_sed_script=
+
+ func_check_prog_sed ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo '' >> conftest.nl
+ "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
+ rm -f conftest.sed
+ SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+ func_check_prog_grep ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ _G_path_prog_max=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo 'GREP' >> conftest.nl
+ "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
+ GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables. These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
: ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
: ${MAKE="make"}
: ${MKDIR="mkdir"}
: ${MV="mv -f"}
: ${RM="rm -f"}
: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
-
-exit_status=$EXIT_SUCCESS
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" $lt_nl"
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-} # func_dirname may be replaced by extended shell implementation
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
+sed_dirname='s|/[^/]*$||'
+sed_basename='s|^.*/||'
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-# dirname: Compute the dirname of FILE. If nonempty,
-# add APPEND to the result, otherwise set result
-# to NONDIR_REPLACEMENT.
-# value returned in "$func_dirname_result"
-# basename: Compute filename of FILE.
-# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
- func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same. If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion. Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+ s/$_G_bs4/&\\
+/g
+ s/^$_G_bs2$_G_dollar/$_G_bs&/
+ s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+ s/\n//g"
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
- esac
-} # func_stripname may be replaced by extended shell implementation
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
- s@/\./@/@g
- t dotsl
- s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-# value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
- # Start from root dir and reassemble the path.
- func_normal_abspath_result=
- func_normal_abspath_tpath=$1
- func_normal_abspath_altnamespace=
- case $func_normal_abspath_tpath in
- "")
- # Empty path, that just means $cwd.
- func_stripname '' '/' "`pwd`"
- func_normal_abspath_result=$func_stripname_result
- return
- ;;
- # The next three entries are used to spot a run of precisely
- # two leading slashes without using negated character classes;
- # we take advantage of case's first-match behaviour.
- ///*)
- # Unusual form of absolute path, do nothing.
- ;;
- //*)
- # Not necessarily an ordinary path; POSIX reserves leading '//'
- # and for example Cygwin uses it to access remote file shares
- # over CIFS/SMB, so we conserve a leading double slash if found.
- func_normal_abspath_altnamespace=/
- ;;
- /*)
- # Absolute path, do nothing.
- ;;
- *)
- # Relative path, prepend $cwd.
- func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
- ;;
- esac
- # Cancel out all the simple stuff to save iterations. We also want
- # the path to end with a slash for ease of parsing, so make sure
- # there is one (and only one) here.
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
- while :; do
- # Processed it all yet?
- if test "$func_normal_abspath_tpath" = / ; then
- # If we ascended to the root using ".." the result may be empty now.
- if test -z "$func_normal_abspath_result" ; then
- func_normal_abspath_result=/
- fi
- break
- fi
- func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcar"`
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcdr"`
- # Figure out what to do with it
- case $func_normal_abspath_tcomponent in
- "")
- # Trailing empty path component, ignore it.
- ;;
- ..)
- # Parent dir; strip last assembled component from result.
- func_dirname "$func_normal_abspath_result"
- func_normal_abspath_result=$func_dirname_result
- ;;
- *)
- # Actual path component, append it.
- func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
- ;;
- esac
- done
- # Restore leading double-slash if one was found on entry.
- func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-# value returned in "$func_relative_path_result"
-func_relative_path ()
-{
- func_relative_path_result=
- func_normal_abspath "$1"
- func_relative_path_tlibdir=$func_normal_abspath_result
- func_normal_abspath "$2"
- func_relative_path_tbindir=$func_normal_abspath_result
-
- # Ascend the tree starting from libdir
- while :; do
- # check if we have found a prefix of bindir
- case $func_relative_path_tbindir in
- $func_relative_path_tlibdir)
- # found an exact match
- func_relative_path_tcancelled=
- break
- ;;
- $func_relative_path_tlibdir*)
- # found a matching prefix
- func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
- func_relative_path_tcancelled=$func_stripname_result
- if test -z "$func_relative_path_result"; then
- func_relative_path_result=.
- fi
- break
- ;;
- *)
- func_dirname $func_relative_path_tlibdir
- func_relative_path_tlibdir=${func_dirname_result}
- if test "x$func_relative_path_tlibdir" = x ; then
- # Have to descend all the way to the root!
- func_relative_path_result=../$func_relative_path_result
- func_relative_path_tcancelled=$func_relative_path_tbindir
- break
- fi
- func_relative_path_result=../$func_relative_path_result
- ;;
- esac
- done
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+# debug_cmd='echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
- # Now calculate path; take care to avoid doubling-up slashes.
- func_stripname '' '/' "$func_relative_path_result"
- func_relative_path_result=$func_stripname_result
- func_stripname '/' '/' "$func_relative_path_tcancelled"
- if test "x$func_stripname_result" != x ; then
- func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
- fi
+# By convention, finish your script with:
+#
+# exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
- # Normalisation. If bindir is libdir, return empty string,
- # else relative path ending with a slash; either way, target
- # file name can be directly appended.
- if test ! -z "$func_relative_path_result"; then
- func_stripname './' '' "$func_relative_path_result/"
- func_relative_path_result=$func_stripname_result
- fi
-}
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath=$0
-# The name of this program:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
-# Make sure we have an absolute path for reexecution:
+# Make sure we have an absolute progpath for reexecution:
case $progpath in
[\\/]*|[A-Za-z]:\\*) ;;
*[\\/]*)
- progdir=$func_dirname_result
+ progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
progdir=`cd "$progdir" && pwd`
- progpath="$progdir/$progname"
+ progpath=$progdir/$progname
;;
*)
- save_IFS="$IFS"
+ _G_IFS=$IFS
IFS=${PATH_SEPARATOR-:}
for progdir in $PATH; do
- IFS="$save_IFS"
+ IFS=$_G_IFS
test -x "$progdir/$progname" && break
done
- IFS="$save_IFS"
+ IFS=$_G_IFS
test -n "$progdir" || progdir=`pwd`
- progpath="$progdir/$progname"
+ progpath=$progdir/$progname
;;
esac
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes. A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
- s/$bs4/&\\
-/g
- s/^$bs2$dollar/$bs&/
- s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
- s/\n//g"
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
-# Standard options:
opt_dry_run=false
-opt_help=false
opt_quiet=false
opt_verbose=false
-opt_warning=:
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
-{
- $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
-}
+# Categories 'all' and 'none' are always available. Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
- $opt_verbose && func_echo ${1+"$@"}
+# By default, display warnings according to 'opt_warning_types'. Set
+# 'warning_func' to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
- # A bug in bash halts the script if the last line of a function
- # fails when set -e is in force, so we need another command to
- # work around that:
- :
-}
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
- $ECHO "$*"
-}
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
-{
- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
-}
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
- # bash bug again:
- :
-}
-# func_fatal_error arg...
-# Echo program name prefixed message to standard error, and exit.
-func_fatal_error ()
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
{
- func_error ${1+"$@"}
- exit $EXIT_FAILURE
-}
+ $debug_cmd
+
+ test -t 1 && {
+ # COLORTERM and USE_ANSI_COLORS environment variables take
+ # precedence, because most terminfo databases neglect to describe
+ # whether color sequences are supported.
+ test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+ if test 1 = "$USE_ANSI_COLORS"; then
+ # Standard ANSI escape sequences
+ tc_reset='[0m'
+ tc_bold='[1m'; tc_standout='[7m'
+ tc_red='[31m'; tc_green='[32m'
+ tc_blue='[34m'; tc_cyan='[36m'
+ else
+ # Otherwise trust the terminfo database after all.
+ test -n "`tput sgr0 2>/dev/null`" && {
+ tc_reset=`tput sgr0`
+ test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+ tc_standout=$tc_bold
+ test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+ test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+ test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+ test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+ test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+ }
+ fi
+ }
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
- func_error ${1+"$@"}
- func_fatal_error "$help"
+ require_term_colors=:
}
-help="Try \`$progname --help' for more information." ## default
-# func_grep expression filename
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
+
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
+
+
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
+
+ # We should try to minimise forks, especially on Windows where they are
+ # unreasonably slow, so skip the feature probes when bash or zsh are
+ # being used:
+ if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+ : ${_G_HAVE_ARITH_OP="yes"}
+ : ${_G_HAVE_XSI_OPS="yes"}
+ # The += operator was introduced in bash 3.1
+ case $BASH_VERSION in
+ [12].* | 3.0 | 3.0*) ;;
+ *)
+ : ${_G_HAVE_PLUSEQ_OP="yes"}
+ ;;
+ esac
+ fi
+
+ # _G_HAVE_PLUSEQ_OP
+ # Can be empty, in which case the shell is probed, "yes" if += is
+ # useable or anything else if it does not work.
+ test -z "$_G_HAVE_PLUSEQ_OP" \
+ && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+ && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_append ()
+ {
+ $debug_cmd
+
+ eval "$1+=\$2"
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_append ()
+ {
+ $debug_cmd
+
+ eval "$1=\$$1\$2"
+ }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+ eval 'func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_for_eval "$2"
+ eval "$1+=\\ \$func_quote_for_eval_result"
+ }'
+else
+ func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_for_eval "$2"
+ eval "$1=\$$1\\ \$func_quote_for_eval_result"
+ }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE. For example:
+#
+# func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
+{
+ $debug_cmd
+
+ eval _G_current_value='`$ECHO $'$1'`'
+ _G_delim=`expr "$2" : '\(.\)'`
+
+ case $_G_delim$_G_current_value$_G_delim in
+ *"$2$_G_delim"*) ;;
+ *) func_append "$@" ;;
+ esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+ test -z "$_G_HAVE_ARITH_OP" \
+ && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+ && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+ eval 'func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=$(( $* ))
+ }'
+else
+ func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=`expr "$@"`
+ }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ # If this shell supports suffix pattern removal, then use it to avoid
+ # forking. Hide the definitions single quotes in case the shell chokes
+ # on unsupported syntax...
+ _b='func_basename_result=${1##*/}'
+ _d='case $1 in
+ */*) func_dirname_result=${1%/*}$2 ;;
+ * ) func_dirname_result=$3 ;;
+ esac'
+
+else
+ # ...otherwise fall back to using sed.
+ _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+ _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"`
+ if test "X$func_dirname_result" = "X$1"; then
+ func_dirname_result=$3
+ else
+ func_append func_dirname_result "$2"
+ fi'
+fi
+
+eval 'func_basename ()
+{
+ $debug_cmd
+
+ '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+eval 'func_dirname ()
+{
+ $debug_cmd
+
+ '"$_d"'
+}'
+
+
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
+{
+ $debug_cmd
+
+ '"$_b"'
+ '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+ $debug_cmd
+
+ _G_message=$*
+
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
+
+
+# func_echo_all ARG...
+# --------------------
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ _G_infix=$1; shift
+ _G_indent=$_G_infix
+ _G_prefix="$progname: $_G_infix: "
+ _G_message=$*
+
+ # Strip color escape sequences before counting printable length
+ for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
+ do
+ test -n "$_G_tc" && {
+ _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+ _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+ }
+ done
+ _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes
+
+ func_echo_infix_1_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_infix_1_IFS
+ $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+ _G_prefix=$_G_indent
+ done
+ IFS=$func_echo_infix_1_IFS
+}
+
+
+# func_error ARG...
+# -----------------
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2
+}
+
+
+# func_fatal_error ARG...
+# -----------------------
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ $debug_cmd
+
+ func_error "$*"
+ exit $EXIT_FAILURE
+}
+
+
+# func_grep EXPRESSION FILENAME
+# -----------------------------
# Check whether EXPRESSION matches any line of FILENAME, without output.
func_grep ()
{
+ $debug_cmd
+
$GREP "$1" "$2" >/dev/null 2>&1
}
-# func_mkdir_p directory-path
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+ test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=${#1}
+ }'
+else
+ func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+ }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
# Make sure the entire path to DIRECTORY-PATH is available.
func_mkdir_p ()
{
- my_directory_path="$1"
- my_dir_list=
+ $debug_cmd
- if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+ _G_directory_path=$1
+ _G_dir_list=
- # Protect directory names starting with `-'
- case $my_directory_path in
- -*) my_directory_path="./$my_directory_path" ;;
+ if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
+
+ # Protect directory names starting with '-'
+ case $_G_directory_path in
+ -*) _G_directory_path=./$_G_directory_path ;;
esac
# While some portion of DIR does not yet exist...
- while test ! -d "$my_directory_path"; do
+ while test ! -d "$_G_directory_path"; do
# ...make a list in topmost first order. Use a colon delimited
# list incase some portion of path contains whitespace.
- my_dir_list="$my_directory_path:$my_dir_list"
+ _G_dir_list=$_G_directory_path:$_G_dir_list
# If the last portion added has no slash in it, the list is done
- case $my_directory_path in */*) ;; *) break ;; esac
+ case $_G_directory_path in */*) ;; *) break ;; esac
# ...otherwise throw away the child directory and loop
- my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+ _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
done
- my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+ _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
- save_mkdir_p_IFS="$IFS"; IFS=':'
- for my_dir in $my_dir_list; do
- IFS="$save_mkdir_p_IFS"
- # mkdir can fail with a `File exist' error if two processes
+ func_mkdir_p_IFS=$IFS; IFS=:
+ for _G_dir in $_G_dir_list; do
+ IFS=$func_mkdir_p_IFS
+ # mkdir can fail with a 'File exist' error if two processes
# try to create one of the directories concurrently. Don't
# stop in that case!
- $MKDIR "$my_dir" 2>/dev/null || :
+ $MKDIR "$_G_dir" 2>/dev/null || :
done
- IFS="$save_mkdir_p_IFS"
+ IFS=$func_mkdir_p_IFS
# Bail out if we (or some other process) failed to create a directory.
- test -d "$my_directory_path" || \
- func_fatal_error "Failed to create \`$1'"
+ test -d "$_G_directory_path" || \
+ func_fatal_error "Failed to create '$1'"
fi
}
-# func_mktempdir [string]
+# func_mktempdir [BASENAME]
+# -------------------------
# Make a temporary directory that won't clash with other running
# libtool processes, and avoids race conditions if possible. If
-# given, STRING is the basename for that directory.
+# given, BASENAME is the basename for that directory.
func_mktempdir ()
{
- my_template="${TMPDIR-/tmp}/${1-$progname}"
+ $debug_cmd
+
+ _G_template=${TMPDIR-/tmp}/${1-$progname}
- if test "$opt_dry_run" = ":"; then
+ if test : = "$opt_dry_run"; then
# Return a directory name, but don't create it in dry-run mode
- my_tmpdir="${my_template}-$$"
+ _G_tmpdir=$_G_template-$$
else
# If mktemp works, use that first and foremost
- my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+ _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
- if test ! -d "$my_tmpdir"; then
+ if test ! -d "$_G_tmpdir"; then
# Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
+ _G_tmpdir=$_G_template-${RANDOM-0}$$
- save_mktempdir_umask=`umask`
+ func_mktempdir_umask=`umask`
umask 0077
- $MKDIR "$my_tmpdir"
- umask $save_mktempdir_umask
+ $MKDIR "$_G_tmpdir"
+ umask $func_mktempdir_umask
fi
# If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || \
- func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+ test -d "$_G_tmpdir" || \
+ func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
fi
- $ECHO "$my_tmpdir"
+ $ECHO "$_G_tmpdir"
}
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
-func_quote_for_eval ()
+# func_normal_abspath PATH
+# ------------------------
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+func_normal_abspath ()
{
- case $1 in
- *[\\\`\"\$]*)
- func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
- *)
- func_quote_for_eval_unquoted_result="$1" ;;
- esac
+ $debug_cmd
- case $func_quote_for_eval_unquoted_result in
- # Double-quote args containing shell metacharacters to delay
- # word splitting, command substitution and and variable
- # expansion for a subsequent eval.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+ # These SED scripts presuppose an absolute path with a trailing slash.
+ _G_pathcar='s|^/\([^/]*\).*$|\1|'
+ _G_pathcdr='s|^/[^/]*||'
+ _G_removedotparts=':dotsl
+ s|/\./|/|g
+ t dotsl
+ s|/\.$|/|'
+ _G_collapseslashes='s|/\{1,\}|/|g'
+ _G_finalslash='s|/*$|/|'
+
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
;;
*)
- func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
esac
+
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test / = "$func_normal_abspath_tpath"; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result"; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
}
-# func_quote_for_expand arg
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
+{
+ $debug_cmd
+
+ $opt_quiet || func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
+{
+ $debug_cmd
+
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
+
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=$func_dirname_result
+ if test -z "$func_relative_path_tlibdir"; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test -n "$func_stripname_result"; then
+ func_append func_relative_path_result "/$func_stripname_result"
+ fi
+
+ # Normalisation. If bindir is libdir, return '.' else relative path.
+ if test -n "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ fi
+
+ test -n "$func_relative_path_result" || func_relative_path_result=.
+
+ :
+}
+
+
+# func_quote_for_eval ARG...
+# --------------------------
+# Aesthetically quote ARGs to be evaled later.
+# This function returns two values:
+# i) func_quote_for_eval_result
+# double-quoted, suitable for a subsequent eval
+# ii) func_quote_for_eval_unquoted_result
+# has all characters that are still active within double
+# quotes backslashified.
+func_quote_for_eval ()
+{
+ $debug_cmd
+
+ func_quote_for_eval_unquoted_result=
+ func_quote_for_eval_result=
+ while test 0 -lt $#; do
+ case $1 in
+ *[\\\`\"\$]*)
+ _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
+ *)
+ _G_unquoted_arg=$1 ;;
+ esac
+ if test -n "$func_quote_for_eval_unquoted_result"; then
+ func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
+ else
+ func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
+ fi
+
+ case $_G_unquoted_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and variable expansion
+ # for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ _G_quoted_arg=\"$_G_unquoted_arg\"
+ ;;
+ *)
+ _G_quoted_arg=$_G_unquoted_arg
+ ;;
+ esac
+
+ if test -n "$func_quote_for_eval_result"; then
+ func_append func_quote_for_eval_result " $_G_quoted_arg"
+ else
+ func_append func_quote_for_eval_result "$_G_quoted_arg"
+ fi
+ shift
+ done
+}
+
+
+# func_quote_for_expand ARG
+# -------------------------
# Aesthetically quote ARG to be evaled later; same as above,
# but do not quote variable references.
func_quote_for_expand ()
{
+ $debug_cmd
+
case $1 in
*[\\\`\"]*)
- my_arg=`$ECHO "$1" | $SED \
- -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+ _G_arg=`$ECHO "$1" | $SED \
+ -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
*)
- my_arg="$1" ;;
+ _G_arg=$1 ;;
esac
- case $my_arg in
+ case $_G_arg in
# Double-quote args containing shell metacharacters to delay
# word splitting and command substitution for a subsequent eval.
# Many Bourne shells cannot handle close brackets correctly
# in scan sets, so we specify it separately.
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- my_arg="\"$my_arg\""
+ _G_arg=\"$_G_arg\"
;;
esac
- func_quote_for_expand_result="$my_arg"
+ func_quote_for_expand_result=$_G_arg
+}
+
+
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_stripname ()
+ {
+ $debug_cmd
+
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary variable first.
+ func_stripname_result=$3
+ func_stripname_result=${func_stripname_result#"$1"}
+ func_stripname_result=${func_stripname_result%"$2"}
+ }'
+else
+ func_stripname ()
+ {
+ $debug_cmd
+
+ case $2 in
+ .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
+ *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
+ esac
+ }
+fi
+
+
+# func_show_eval CMD [FAIL_EXP]
+# -----------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ $debug_cmd
+
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
+
+ func_quote_for_expand "$_G_cmd"
+ eval "func_notquiet $func_quote_for_expand_result"
+
+ $opt_dry_run || {
+ eval "$_G_cmd"
+ _G_status=$?
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
+ fi
+ }
+}
+
+
+# func_show_eval_locale CMD [FAIL_EXP]
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ $debug_cmd
+
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
+
+ $opt_quiet || {
+ func_quote_for_expand "$_G_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ $opt_dry_run || {
+ eval "$_G_user_locale
+ $_G_cmd"
+ _G_status=$?
+ eval "$_G_safe_locale"
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
+ fi
+ }
+}
+
+
+# func_tr_sh
+# ----------
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ $debug_cmd
+
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
+}
+
+
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $debug_cmd
+
+ $opt_verbose && func_echo "$*"
+
+ :
+}
+
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
+}
+
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+ $debug_cmd
+
+ # CATEGORY must be in the warning_categories list!
+ case " $warning_categories " in
+ *" $1 "*) ;;
+ *) func_internal_error "invalid warning category '$1'" ;;
+ esac
+
+ _G_category=$1
+ shift
+
+ case " $opt_warning_types " in
+ *" $_G_category "*) $warning_func ${1+"$@"} ;;
+ esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+ $debug_cmd
+
+ printf '%s\n%s\n' "$1" "$2" \
+ | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false. Use it like this:
+#
+# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+ $debug_cmd
+
+ test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# Set a version string for this script.
+scriptversion=2015-10-07.11; # UTC
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# Copyright (C) 2010-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+# #!/bin/sh
+# . relative/path/to/funclib.sh
+# . relative/path/to/options-parser
+# scriptversion=1.0
+# func_options ${1+"$@"}
+# eval set dummy "$func_options_result"; shift
+# ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# warranty; '.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath [OPTION]...'
+
+# Short help message in response to '-h' and '--help'. Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+ --debug enable verbose shell tracing
+ -W, --warnings=CATEGORY
+ report the warnings falling in CATEGORY [all]
+ -v, --verbose verbosely report processing
+ --version print version information and exit
+ -h, --help print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+ 'all' show all warnings
+ 'none' turn off all the warnings
+ 'error' warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# to the main code. A hook is just a named list of of function, that can
+# be run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+ $debug_cmd
+
+ func_append hookable_fns " $1"
+}
+
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+ $debug_cmd
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not accept hook functions." ;;
+ esac
+
+ eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
+func_remove_hook ()
+{
+ $debug_cmd
+
+ eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_run_hooks FUNC_NAME [ARG]...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It is assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+ $debug_cmd
+
+ _G_rc_run_hooks=false
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not support hook funcions.n" ;;
+ esac
+
+ eval _G_hook_fns=\$$1_hooks; shift
+
+ for _G_hook in $_G_hook_fns; do
+ if eval $_G_hook '"$@"'; then
+ # store returned options list back into positional
+ # parameters for next 'cmd' execution.
+ eval _G_hook_result=\$${_G_hook}_result
+ eval set dummy "$_G_hook_result"; shift
+ _G_rc_run_hooks=:
+ fi
+ done
+
+ $_G_rc_run_hooks && func_run_hooks_result=$_G_hook_result
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list in your hook function, you may remove/edit
+# any options that you action, and then pass back the remaining unprocessed
+# options in '<hooked_function_name>_result', escaped suitably for
+# 'eval'. In this case you also must return $EXIT_SUCCESS to let the
+# hook's caller know that it should pay attention to
+# '<hooked_function_name>_result'. Returning $EXIT_FAILURE signalizes that
+# arguments are left untouched by the hook and therefore caller will ignore the
+# result variable.
+#
+# Like this:
+#
+# my_options_prep ()
+# {
+# $debug_cmd
+#
+# # Extend the existing usage message.
+# usage_message=$usage_message'
+# -s, --silent don'\''t print informational messages
+# '
+# # No change in '$@' (ignored completely by this hook). There is
+# # no need to do the equivalent (but slower) action:
+# # func_quote_for_eval ${1+"$@"}
+# # my_options_prep_result=$func_quote_for_eval_result
+# false
+# }
+# func_add_hook func_options_prep my_options_prep
+#
+#
+# my_silent_option ()
+# {
+# $debug_cmd
+#
+# args_changed=false
+#
+# # Note that for efficiency, we parse as many options as we can
+# # recognise in a loop before passing the remainder back to the
+# # caller on the first unrecognised argument we encounter.
+# while test $# -gt 0; do
+# opt=$1; shift
+# case $opt in
+# --silent|-s) opt_silent=:
+# args_changed=:
+# ;;
+# # Separate non-argument short options:
+# -s*) func_split_short_opt "$_G_opt"
+# set dummy "$func_split_short_opt_name" \
+# "-$func_split_short_opt_arg" ${1+"$@"}
+# shift
+# args_changed=:
+# ;;
+# *) # Make sure the first unrecognised option "$_G_opt"
+# # is added back to "$@", we could need that later
+# # if $args_changed is true.
+# set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+# esac
+# done
+#
+# if $args_changed; then
+# func_quote_for_eval ${1+"$@"}
+# my_silent_option_result=$func_quote_for_eval_result
+# fi
+#
+# $args_changed
+# }
+# func_add_hook func_parse_options my_silent_option
+#
+#
+# my_option_validation ()
+# {
+# $debug_cmd
+#
+# $opt_silent && $opt_verbose && func_fatal_help "\
+# '--silent' and '--verbose' options are mutually exclusive."
+#
+# false
+# }
+# func_add_hook func_validate_options my_option_validation
+#
+# You'll also need to manually amend $usage_message to reflect the extra
+# options you parse. It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options_finish [ARG]...
+# ----------------------------
+# Finishing the option parse loop (call 'func_options' hooks ATM).
+func_options_finish ()
+{
+ $debug_cmd
+
+ _G_func_options_finish_exit=false
+ if func_run_hooks func_options ${1+"$@"}; then
+ func_options_finish_result=$func_run_hooks_result
+ _G_func_options_finish_exit=:
+ fi
+
+ $_G_func_options_finish_exit
+}
+
+
+# func_options [ARG]...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+ $debug_cmd
+
+ _G_rc_options=false
+
+ for my_func in options_prep parse_options validate_options options_finish
+ do
+ if eval func_$my_func '${1+"$@"}'; then
+ eval _G_res_var='$'"func_${my_func}_result"
+ eval set dummy "$_G_res_var" ; shift
+ _G_rc_options=:
+ fi
+ done
+
+ # Save modified positional parameters for caller. As a top-level
+ # options-parser function we always need to set the 'func_options_result'
+ # variable (regardless the $_G_rc_options value).
+ if $_G_rc_options; then
+ func_options_result=$_G_res_var
+ else
+ func_quote_for_eval ${1+"$@"}
+ func_options_result=$func_quote_for_eval_result
+ fi
+
+ $_G_rc_options
+}
+
+
+# func_options_prep [ARG]...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters. If a hook function modifies that list, and
+# needs to propagate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before
+# returning $EXIT_SUCCESS (otherwise $EXIT_FAILURE is returned).
+func_hookable func_options_prep
+func_options_prep ()
+{
+ $debug_cmd
+
+ # Option defaults:
+ opt_verbose=false
+ opt_warning_types=
+
+ _G_rc_options_prep=false
+ if func_run_hooks func_options_prep ${1+"$@"}; then
+ _G_rc_options_prep=:
+ # save modified positional parameters for caller
+ func_options_prep_result=$func_run_hooks_result
+ fi
+
+ $_G_rc_options_prep
}
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.
-func_show_eval ()
+# func_parse_options [ARG]...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
{
- my_cmd="$1"
- my_fail_exp="${2-:}"
+ $debug_cmd
+
+ func_parse_options_result=
+
+ _G_rc_parse_options=false
+ # this just eases exit handling
+ while test $# -gt 0; do
+ # Defer to hook functions for initial option parsing, so they
+ # get priority in the event of reusing an option name.
+ if func_run_hooks func_parse_options ${1+"$@"}; then
+ eval set dummy "$func_run_hooks_result"; shift
+ _G_rc_parse_options=:
+ fi
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
+ # Break out of the loop if we already parsed every option.
+ test $# -gt 0 || break
- if ${opt_dry_run-false}; then :; else
- eval "$my_cmd"
- my_status=$?
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
- fi
+ _G_match_parse_options=:
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --debug|-x) debug_cmd='set -x'
+ func_echo "enabling shell trace mode"
+ $debug_cmd
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ set dummy --warnings none ${1+"$@"}
+ shift
+ ;;
+
+ --warnings|--warning|-W)
+ if test $# = 0 && func_missing_arg $_G_opt; then
+ _G_rc_parse_options=:
+ break
+ fi
+ case " $warning_categories $1" in
+ *" $1 "*)
+ # trailing space prevents matching last $1 above
+ func_append_uniq opt_warning_types " $1"
+ ;;
+ *all)
+ opt_warning_types=$warning_categories
+ ;;
+ *none)
+ opt_warning_types=none
+ warning_func=:
+ ;;
+ *error)
+ opt_warning_types=$warning_categories
+ warning_func=func_fatal_error
+ ;;
+ *)
+ func_fatal_error \
+ "unsupported warning category: '$1'"
+ ;;
+ esac
+ shift
+ ;;
+
+ --verbose|-v) opt_verbose=: ;;
+ --version) func_version ;;
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+
+ # Separate optargs to long options (plugins may need this):
+ --*=*) func_split_equals "$_G_opt"
+ set dummy "$func_split_equals_lhs" \
+ "$func_split_equals_rhs" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate optargs to short options:
+ -W*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-v*|-x*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) _G_rc_parse_options=: ; break ;;
+ -*) func_fatal_help "unrecognised option: '$_G_opt'" ;;
+ *) set dummy "$_G_opt" ${1+"$@"}; shift
+ _G_match_parse_options=false
+ break
+ ;;
+ esac
+
+ $_G_match_parse_options && _G_rc_parse_options=:
+ done
+
+
+ if $_G_rc_parse_options; then
+ # save modified positional parameters for caller
+ func_quote_for_eval ${1+"$@"}
+ func_parse_options_result=$func_quote_for_eval_result
fi
+
+ $_G_rc_parse_options
}
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it. Use the saved locale for evaluation.
-func_show_eval_locale ()
+# func_validate_options [ARG]...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
{
- my_cmd="$1"
- my_fail_exp="${2-:}"
+ $debug_cmd
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
+ _G_rc_validate_options=false
- if ${opt_dry_run-false}; then :; else
- eval "$lt_user_locale
- $my_cmd"
- my_status=$?
- eval "$lt_safe_locale"
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
- fi
+ # Display all warnings if -W was not given.
+ test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
+
+ if func_run_hooks func_validate_options ${1+"$@"}; then
+ # save modified positional parameters for caller
+ func_validate_options_result=$func_run_hooks_result
+ _G_rc_validate_options=:
fi
-}
-# func_tr_sh
-# Turn $1 into a string suitable for a shell variable name.
-# Result is stored in $func_tr_sh_result. All characters
-# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
-# if $1 begins with a digit, a '_' is prepended as well.
-func_tr_sh ()
-{
- case $1 in
- [0-9]* | *[!a-zA-Z0-9_]*)
- func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
- ;;
- * )
- func_tr_sh_result=$1
- ;;
- esac
+ # Bail if the options were screwed!
+ $exit_cmd $EXIT_FAILURE
+
+ $_G_rc_validate_options
}
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
-{
- $opt_debug
- $SED -n '/(C)/!b go
- :more
- /\./!{
- N
- s/\n# / /
- b more
- }
- :go
- /^# '$PROGRAM' (GNU /,/# warranty; / {
- s/^# //
- s/^# *$//
- s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
- p
- }' < "$progpath"
- exit $?
-}
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
{
- $opt_debug
+ $debug_cmd
- $SED -n '/^# Usage:/,/^# *.*--help/ {
- s/^# //
- s/^# *$//
- s/\$progname/'$progname'/
- p
- }' < "$progpath"
- echo
- $ECHO "run \`$progname --help | more' for full usage"
- exit $?
+ eval \$ECHO \""Usage: $usage"\"
+ eval \$ECHO \""$fatal_help"\"
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
}
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
func_help ()
{
- $opt_debug
-
- $SED -n '/^# Usage:/,/# Report bugs to/ {
- :print
- s/^# //
- s/^# *$//
- s*\$progname*'$progname'*
- s*\$host*'"$host"'*
- s*\$SHELL*'"$SHELL"'*
- s*\$LTCC*'"$LTCC"'*
- s*\$LTCFLAGS*'"$LTCFLAGS"'*
- s*\$LD*'"$LD"'*
- s/\$with_gnu_ld/'"$with_gnu_ld"'/
- s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
- s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
- p
- d
- }
- /^# .* home page:/b print
- /^# General help using/b print
- ' < "$progpath"
- ret=$?
- if test -z "$1"; then
- exit $ret
- fi
+ $debug_cmd
+
+ func_usage_message
+ $ECHO "$long_help_message"
+ exit 0
}
-# func_missing_arg argname
+
+# func_missing_arg ARGNAME
+# ------------------------
# Echo program name prefixed message to standard error and set global
# exit_cmd.
func_missing_arg ()
{
- $opt_debug
+ $debug_cmd
- func_error "missing argument for $1."
+ func_error "Missing argument for '$1'."
exit_cmd=exit
}
-# func_split_short_opt shortopt
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
+# splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=${1%%=*}
+ func_split_equals_rhs=${1#*=}
+ test "x$func_split_equals_lhs" = "x$1" \
+ && func_split_equals_rhs=
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
+ func_split_equals_rhs=
+ test "x$func_split_equals_lhs" = "x$1" \
+ || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
+ }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
# Set func_split_short_opt_name and func_split_short_opt_arg shell
# variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
+ func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
+ }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
{
- my_sed_short_opt='1s/^\(..\).*$/\1/;q'
- my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+ $debug_cmd
- func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
- func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
+ func_usage_message
+ $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+ exit 0
+}
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
{
- my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
- my_sed_long_arg='1s/^--[^=]*=//'
+ $debug_cmd
- func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
- func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
+ eval \$ECHO \""Usage: $usage"\"
+ echo
+ $SED -n 's|^# ||
+ /^Written by/{
+ x;p;x
+ }
+ h
+ /^Written by/q' < "$progpath"
+ echo
+ eval \$ECHO \""$usage_message"\"
+}
-exit_cmd=:
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $debug_cmd
+ printf '%s\n' "$progname $scriptversion"
+ $SED -n '
+ /(C)/!b go
+ :more
+ /\./!{
+ N
+ s|\n# | |
+ b more
+ }
+ :go
+ /^# Written by /,/# warranty; / {
+ s|^# ||
+ s|^# *$||
+ s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
+ p
+ }
+ /^# Written by / {
+ s|^# ||
+ p
+ }
+ /^warranty; /q' < "$progpath"
+ exit $?
+}
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
-# Global variables.
-nonopt=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.6'
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
{
- eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
+ $debug_cmd
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
-{
- func_quote_for_eval "${2}"
- eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
+ _G_message=$*
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
-# func_arith arithmetic-term...
-func_arith ()
+
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
{
- func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
+ $debug_cmd
+ $warning_func ${1+"$@"}
+}
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath [OPTION]... [MODE-ARG]...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+ --config show all configuration variables
+ --debug enable verbose shell tracing
+ -n, --dry-run display commands without modifying any files
+ --features display basic configuration information and exit
+ --mode=MODE use operation mode MODE
+ --no-warnings equivalent to '-Wnone'
+ --preserve-dup-deps don't remove duplicate dependency libraries
+ --quiet, --silent don't print informational messages
+ --tag=TAG use configuration variables from tag TAG
+ -v, --verbose print more informational messages than default
+ --version print version information
+ -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all]
+ -h, --help, --help-all print short, long, or detailed help message
+"
-# func_lo2o object
-func_lo2o ()
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
{
- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
+ $debug_cmd
+
+ func_usage_message
+ $ECHO "$long_help_message
+
+MODE must be one of the following:
+
+ clean remove files from the build directory
+ compile compile a source file into a libtool object
+ execute automatically set library path, then run a program
+ finish complete the installation of libtool libraries
+ install install libraries or executables
+ link create a library or an executable
+ uninstall remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE. When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+ host-triplet: $host
+ shell: $SHELL
+ compiler: $LTCC
+ compiler flags: $LTCFLAGS
+ linker: $LD (gnu? $with_gnu_ld)
+ version: $progname $scriptversion Debian-2.4.6-15
+ automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+ autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU libtool home page: <http://www.gnu.org/s/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+ exit 0
+}
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_lo2o ()
+ {
+ case $1 in
+ *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+ * ) func_lo2o_result=$1 ;;
+ esac
+ }'
+
+ # func_xform LIBOBJ-OR-SOURCE
+ # ---------------------------
+ # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+ # suffix to a '.lo' libtool-object suffix.
+ eval 'func_xform ()
+ {
+ func_xform_result=${1%.*}.lo
+ }'
+else
+ # ...otherwise fall back to using sed.
+ func_lo2o ()
+ {
+ func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+ }
+
+ func_xform ()
+ {
+ func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
+ }
+fi
-# func_fatal_configuration arg...
+# func_fatal_configuration ARG...
+# -------------------------------
# Echo program name prefixed message to standard error, followed by
# a configuration failure hint, and exit.
func_fatal_configuration ()
{
- func_error ${1+"$@"}
- func_error "See the $PACKAGE documentation for more information."
- func_fatal_error "Fatal configuration error."
+ func__fatal_error ${1+"$@"} \
+ "See the $PACKAGE documentation for more information." \
+ "Fatal configuration error."
}
# func_config
+# -----------
# Display the configuration for all the tags in this script.
func_config ()
{
@@ -915,17 +2222,19 @@ func_config ()
exit $?
}
+
# func_features
+# -------------
# Display the features supported by this script.
func_features ()
{
echo "host: $host"
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
echo "enable shared libraries"
else
echo "disable shared libraries"
fi
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
echo "enable static libraries"
else
echo "disable static libraries"
@@ -934,289 +2243,316 @@ func_features ()
exit $?
}
-# func_enable_tag tagname
+
+# func_enable_tag TAGNAME
+# -----------------------
# Verify that TAGNAME is valid, and either flag an error and exit, or
# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
# variable here.
func_enable_tag ()
{
- # Global variable:
- tagname="$1"
+ # Global variable:
+ tagname=$1
- re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
- re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
- sed_extractcf="/$re_begincf/,/$re_endcf/p"
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf=/$re_begincf/,/$re_endcf/p
- # Validate tagname.
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- func_fatal_error "invalid tag name: $tagname"
- ;;
- esac
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
- # Don't test for the "default" C tag, as we know it's
- # there but not specially marked.
- case $tagname in
- CC) ;;
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
*)
- if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
- taglist="$taglist $tagname"
-
- # Evaluate the configuration. Be careful to quote the path
- # and the sed script, to avoid splitting on whitespace, but
- # also don't use non-portable quotes within backquotes within
- # quotes we have to do it in 2 steps:
- extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
- eval "$extractedcf"
- else
- func_error "ignoring unknown tag $tagname"
- fi
- ;;
- esac
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
}
+
# func_check_version_match
+# ------------------------
# Ensure that we are using m4 macros, and libtool script from the same
# release of libtool.
func_check_version_match ()
{
- if test "$package_revision" != "$macro_revision"; then
- if test "$VERSION" != "$macro_version"; then
- if test -z "$macro_version"; then
- cat >&2 <<_LT_EOF
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from an older release.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
- else
- cat >&2 <<_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
- fi
- else
- cat >&2 <<_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
$progname: but the definition of this LT_INIT comes from revision $macro_revision.
$progname: You should recreate aclocal.m4 with macros from revision $package_revision
$progname: of $PACKAGE $VERSION and run autoconf again.
_LT_EOF
- fi
+ fi
- exit $EXIT_MISMATCH
- fi
+ exit $EXIT_MISMATCH
+ fi
}
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
- shift; set dummy --mode clean ${1+"$@"}; shift
- ;;
-compile|compil|compi|comp|com|co|c)
- shift; set dummy --mode compile ${1+"$@"}; shift
- ;;
-execute|execut|execu|exec|exe|ex|e)
- shift; set dummy --mode execute ${1+"$@"}; shift
- ;;
-finish|finis|fini|fin|fi|f)
- shift; set dummy --mode finish ${1+"$@"}; shift
- ;;
-install|instal|insta|inst|ins|in|i)
- shift; set dummy --mode install ${1+"$@"}; shift
- ;;
-link|lin|li|l)
- shift; set dummy --mode link ${1+"$@"}; shift
- ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
- shift; set dummy --mode uninstall ${1+"$@"}; shift
- ;;
-esac
-
+# libtool_options_prep [ARG]...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
+{
+ $debug_mode
+ # Option defaults:
+ opt_config=false
+ opt_dlopen=
+ opt_dry_run=false
+ opt_help=false
+ opt_mode=
+ opt_preserve_dup_deps=false
+ opt_quiet=false
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_warning=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
+ nonopt=
+ preserve_args=
+ _G_rc_lt_options_prep=:
-# Parse options once, thoroughly. This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
-{
- # this just eases exit handling
- while test $# -gt 0; do
- opt="$1"
- shift
- case $opt in
- --debug|-x) opt_debug='set -x'
- func_echo "enabling shell trace mode"
- $opt_debug
- ;;
- --dry-run|--dryrun|-n)
- opt_dry_run=:
- ;;
- --config)
- opt_config=:
-func_config
- ;;
- --dlopen|-dlopen)
- optarg="$1"
- opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
- shift
- ;;
- --preserve-dup-deps)
- opt_preserve_dup_deps=:
- ;;
- --features)
- opt_features=:
-func_features
- ;;
- --finish)
- opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
- ;;
- --help)
- opt_help=:
- ;;
- --help-all)
- opt_help_all=:
-opt_help=': help-all'
- ;;
- --mode)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_mode="$optarg"
-case $optarg in
- # Valid mode arguments:
- clean|compile|execute|finish|install|link|relink|uninstall) ;;
-
- # Catch anything else as an error
- *) func_error "invalid argument for $opt"
- exit_cmd=exit
- break
- ;;
-esac
- shift
- ;;
- --no-silent|--no-quiet)
- opt_silent=false
-func_append preserve_args " $opt"
- ;;
- --no-warning|--no-warn)
- opt_warning=false
-func_append preserve_args " $opt"
- ;;
- --no-verbose)
- opt_verbose=false
-func_append preserve_args " $opt"
- ;;
- --silent|--quiet)
- opt_silent=:
-func_append preserve_args " $opt"
- opt_verbose=false
- ;;
- --verbose|-v)
- opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
- ;;
- --tag)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
- shift
- ;;
-
- -\?|-h) func_usage ;;
- --help) func_help ;;
- --version) func_version ;;
-
- # Separate optargs to long options:
- --*=*)
- func_split_long_opt "$opt"
- set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
- shift
- ;;
-
- # Separate non-argument short options:
- -\?*|-h*|-n*|-v*)
- func_split_short_opt "$opt"
- set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
- shift
- ;;
-
- --) break ;;
- -*) func_fatal_help "unrecognized option \`$opt'" ;;
- *) set dummy "$opt" ${1+"$@"}; shift; break ;;
+ # Shorthand for --mode=foo, only valid as the first argument
+ case $1 in
+ clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+ compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+ execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+ finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+ link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+ *)
+ _G_rc_lt_options_prep=false
+ ;;
esac
- done
- # Validate options:
+ if $_G_rc_lt_options_prep; then
+ # Pass back the list of options.
+ func_quote_for_eval ${1+"$@"}
+ libtool_options_prep_result=$func_quote_for_eval_result
+ fi
- # save first non-option argument
- if test "$#" -gt 0; then
- nonopt="$opt"
- shift
- fi
+ $_G_rc_lt_options_prep
+}
+func_add_hook func_options_prep libtool_options_prep
- # preserve --debug
- test "$opt_debug" = : || func_append preserve_args " --debug"
- case $host in
- *cygwin* | *mingw* | *pw32* | *cegcc*)
- # don't eliminate duplications in $postdeps and $predeps
- opt_duplicate_compiler_generated_deps=:
- ;;
- *)
- opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
- ;;
- esac
+# libtool_parse_options [ARG]...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
+{
+ $debug_cmd
+
+ _G_rc_lt_parse_options=false
- $opt_help || {
- # Sanity checks first:
- func_check_version_match
+ # Perform our own loop to consume as many options as possible in
+ # each iteration.
+ while test $# -gt 0; do
+ _G_match_lt_parse_options=:
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+
+ --config) func_config ;;
+
+ --dlopen|-dlopen)
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+ shift
+ ;;
+
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=: ;;
+
+ --features) func_features ;;
+
+ --finish) set dummy --mode finish ${1+"$@"}; shift ;;
+
+ --help) opt_help=: ;;
+
+ --help-all) opt_help=': help-all' ;;
+
+ --mode) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_mode=$1
+ case $1 in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $_G_opt"
+ exit_cmd=exit
+ break
+ ;;
+ esac
+ shift
+ ;;
+
+ --no-silent|--no-quiet)
+ opt_quiet=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ opt_warning=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-verbose)
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --silent|--quiet)
+ opt_quiet=:
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --tag) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_tag=$1
+ func_append preserve_args " $_G_opt $1"
+ func_enable_tag "$1"
+ shift
+ ;;
+
+ --verbose|-v) opt_quiet=false
+ opt_verbose=:
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ # An option not handled by this hook function:
+ *) set dummy "$_G_opt" ${1+"$@"} ; shift
+ _G_match_lt_parse_options=false
+ break
+ ;;
+ esac
+ $_G_match_lt_parse_options && _G_rc_lt_parse_options=:
+ done
- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- func_fatal_configuration "not configured to build any kind of library"
+ if $_G_rc_lt_parse_options; then
+ # save modified positional parameters for caller
+ func_quote_for_eval ${1+"$@"}
+ libtool_parse_options_result=$func_quote_for_eval_result
fi
- # Darwin sucks
- eval std_shrext=\"$shrext_cmds\"
+ $_G_rc_lt_parse_options
+}
+func_add_hook func_parse_options libtool_parse_options
+
+
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
- func_error "unrecognized option \`-dlopen'"
- $ECHO "$help" 1>&2
- exit $EXIT_FAILURE
+# libtool_validate_options [ARG]...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+ # save first non-option argument
+ if test 0 -lt $#; then
+ nonopt=$1
+ shift
fi
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$progname --help --mode=$opt_mode' for more information."
- }
+ # preserve --debug
+ test : = "$debug_cmd" || func_append preserve_args " --debug"
+
+ case $host in
+ # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+ # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+ *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
+
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+ test yes != "$build_libtool_libs" \
+ && test yes != "$build_old_libs" \
+ && func_fatal_configuration "not configured to build any kind of library"
- # Bail if the options were screwed
- $exit_cmd $EXIT_FAILURE
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+ func_error "unrecognized option '-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help=$help
+ help="Try '$progname --help --mode=$opt_mode' for more information."
+ }
+
+ # Pass back the unparsed argument list
+ func_quote_for_eval ${1+"$@"}
+ libtool_validate_options_result=$func_quote_for_eval_result
}
+func_add_hook func_validate_options libtool_validate_options
+
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
@@ -1224,24 +2560,52 @@ func_enable_tag "$optarg"
## Main. ##
## ----------- ##
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+ $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
# func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_lalib_p ()
{
test -f "$1" &&
- $SED -e 4q "$1" 2>/dev/null \
- | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+ $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
}
# func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function implements the same check as func_lalib_p without
# resorting to external programs. To this end, it redirects stdin and
# closes it afterwards, without saving the original file descriptor.
# As a safety measure, use it only where a negative result would be
-# fatal anyway. Works if `file' does not exist.
+# fatal anyway. Works if 'file' does not exist.
func_lalib_unsafe_p ()
{
lalib_p=no
@@ -1249,13 +2613,13 @@ func_lalib_unsafe_p ()
for lalib_p_l in 1 2 3 4
do
read lalib_p_line
- case "$lalib_p_line" in
+ case $lalib_p_line in
\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
esac
done
exec 0<&5 5<&-
fi
- test "$lalib_p" = yes
+ test yes = "$lalib_p"
}
# func_ltwrapper_script_p file
@@ -1264,7 +2628,8 @@ func_lalib_unsafe_p ()
# determined imposters.
func_ltwrapper_script_p ()
{
- func_lalib_p "$1"
+ test -f "$1" &&
+ $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
}
# func_ltwrapper_executable_p file
@@ -1289,7 +2654,7 @@ func_ltwrapper_scriptname ()
{
func_dirname_and_basename "$1" "" "."
func_stripname '' '.exe' "$func_basename_result"
- func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
}
# func_ltwrapper_p file
@@ -1308,11 +2673,13 @@ func_ltwrapper_p ()
# FAIL_CMD may read-access the current command in variable CMD!
func_execute_cmds ()
{
- $opt_debug
+ $debug_cmd
+
save_ifs=$IFS; IFS='~'
for cmd in $1; do
- IFS=$save_ifs
+ IFS=$sp$nl
eval cmd=\"$cmd\"
+ IFS=$save_ifs
func_show_eval "$cmd" "${2-:}"
done
IFS=$save_ifs
@@ -1324,10 +2691,11 @@ func_execute_cmds ()
# Note that it is not necessary on cygwin/mingw to append a dot to
# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
# behavior happens only for exec(3), not for open(2)! Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
+# 'FILE.' does not work on cygwin managed mounts.
func_source ()
{
- $opt_debug
+ $debug_cmd
+
case $1 in
*/* | *\\*) . "$1" ;;
*) . "./$1" ;;
@@ -1354,10 +2722,10 @@ func_resolve_sysroot ()
# store the result into func_replace_sysroot_result.
func_replace_sysroot ()
{
- case "$lt_sysroot:$1" in
+ case $lt_sysroot:$1 in
?*:"$lt_sysroot"*)
func_stripname "$lt_sysroot" '' "$1"
- func_replace_sysroot_result="=$func_stripname_result"
+ func_replace_sysroot_result='='$func_stripname_result
;;
*)
# Including no sysroot.
@@ -1374,7 +2742,8 @@ func_replace_sysroot ()
# arg is usually of the form 'gcc ...'
func_infer_tag ()
{
- $opt_debug
+ $debug_cmd
+
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
@@ -1393,7 +2762,7 @@ func_infer_tag ()
for z in $available_tags; do
if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
# Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
CC_quoted=
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
@@ -1418,7 +2787,7 @@ func_infer_tag ()
# line option must be used.
if test -z "$tagname"; then
func_echo "unable to infer tagged configuration"
- func_fatal_error "specify a tag with \`--tag'"
+ func_fatal_error "specify a tag with '--tag'"
# else
# func_verbose "using $tagname tagged configuration"
fi
@@ -1434,15 +2803,15 @@ func_infer_tag ()
# but don't create it if we're doing a dry run.
func_write_libtool_object ()
{
- write_libobj=${1}
- if test "$build_libtool_libs" = yes; then
- write_lobj=\'${2}\'
+ write_libobj=$1
+ if test yes = "$build_libtool_libs"; then
+ write_lobj=\'$2\'
else
write_lobj=none
fi
- if test "$build_old_libs" = yes; then
- write_oldobj=\'${3}\'
+ if test yes = "$build_old_libs"; then
+ write_oldobj=\'$3\'
else
write_oldobj=none
fi
@@ -1450,7 +2819,7 @@ func_write_libtool_object ()
$opt_dry_run || {
cat >${write_libobj}T <<EOF
# $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
@@ -1462,7 +2831,7 @@ pic_object=$write_lobj
non_pic_object=$write_oldobj
EOF
- $MV "${write_libobj}T" "${write_libobj}"
+ $MV "${write_libobj}T" "$write_libobj"
}
}
@@ -1482,8 +2851,9 @@ EOF
# be empty on error (or when ARG is empty)
func_convert_core_file_wine_to_w32 ()
{
- $opt_debug
- func_convert_core_file_wine_to_w32_result="$1"
+ $debug_cmd
+
+ func_convert_core_file_wine_to_w32_result=$1
if test -n "$1"; then
# Unfortunately, winepath does not exit with a non-zero error code, so we
# are forced to check the contents of stdout. On the other hand, if the
@@ -1491,9 +2861,9 @@ func_convert_core_file_wine_to_w32 ()
# *an error message* to stdout. So we must check for both error code of
# zero AND non-empty stdout, which explains the odd construction:
func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
- if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
- $SED -e "$lt_sed_naive_backslashify"`
+ $SED -e "$sed_naive_backslashify"`
else
func_convert_core_file_wine_to_w32_result=
fi
@@ -1514,18 +2884,19 @@ func_convert_core_file_wine_to_w32 ()
# are convertible, then the result may be empty.
func_convert_core_path_wine_to_w32 ()
{
- $opt_debug
+ $debug_cmd
+
# unfortunately, winepath doesn't convert paths, only file names
- func_convert_core_path_wine_to_w32_result=""
+ func_convert_core_path_wine_to_w32_result=
if test -n "$1"; then
oldIFS=$IFS
IFS=:
for func_convert_core_path_wine_to_w32_f in $1; do
IFS=$oldIFS
func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
- if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -n "$func_convert_core_file_wine_to_w32_result"; then
if test -z "$func_convert_core_path_wine_to_w32_result"; then
- func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
else
func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
fi
@@ -1554,7 +2925,8 @@ func_convert_core_path_wine_to_w32 ()
# environment variable; do not put it in $PATH.
func_cygpath ()
{
- $opt_debug
+ $debug_cmd
+
if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
if test "$?" -ne 0; then
@@ -1563,7 +2935,7 @@ func_cygpath ()
fi
else
func_cygpath_result=
- func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
fi
}
#end: func_cygpath
@@ -1574,10 +2946,11 @@ func_cygpath ()
# result in func_convert_core_msys_to_w32_result.
func_convert_core_msys_to_w32 ()
{
- $opt_debug
+ $debug_cmd
+
# awkward: cmd appends spaces to result
func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
- $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+ $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
}
#end: func_convert_core_msys_to_w32
@@ -1588,13 +2961,14 @@ func_convert_core_msys_to_w32 ()
# func_to_host_file_result to ARG1).
func_convert_file_check ()
{
- $opt_debug
- if test -z "$2" && test -n "$1" ; then
+ $debug_cmd
+
+ if test -z "$2" && test -n "$1"; then
func_error "Could not determine host file name corresponding to"
- func_error " \`$1'"
+ func_error " '$1'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback:
- func_to_host_file_result="$1"
+ func_to_host_file_result=$1
fi
}
# end func_convert_file_check
@@ -1606,10 +2980,11 @@ func_convert_file_check ()
# func_to_host_file_result to a simplistic fallback value (see below).
func_convert_path_check ()
{
- $opt_debug
+ $debug_cmd
+
if test -z "$4" && test -n "$3"; then
func_error "Could not determine the host path corresponding to"
- func_error " \`$3'"
+ func_error " '$3'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback. This is a deliberately simplistic "conversion" and
# should not be "improved". See libtool.info.
@@ -1618,7 +2993,7 @@ func_convert_path_check ()
func_to_host_path_result=`echo "$3" |
$SED -e "$lt_replace_pathsep_chars"`
else
- func_to_host_path_result="$3"
+ func_to_host_path_result=$3
fi
fi
}
@@ -1630,9 +3005,10 @@ func_convert_path_check ()
# and appending REPL if ORIG matches BACKPAT.
func_convert_path_front_back_pathsep ()
{
- $opt_debug
+ $debug_cmd
+
case $4 in
- $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ $1 ) func_to_host_path_result=$3$func_to_host_path_result
;;
esac
case $4 in
@@ -1646,7 +3022,7 @@ func_convert_path_front_back_pathsep ()
##################################################
# $build to $host FILE NAME CONVERSION FUNCTIONS #
##################################################
-# invoked via `$to_host_file_cmd ARG'
+# invoked via '$to_host_file_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# Result will be available in $func_to_host_file_result.
@@ -1657,7 +3033,8 @@ func_convert_path_front_back_pathsep ()
# in func_to_host_file_result.
func_to_host_file ()
{
- $opt_debug
+ $debug_cmd
+
$to_host_file_cmd "$1"
}
# end func_to_host_file
@@ -1669,7 +3046,8 @@ func_to_host_file ()
# in (the comma separated) LAZY, no conversion takes place.
func_to_tool_file ()
{
- $opt_debug
+ $debug_cmd
+
case ,$2, in
*,"$to_tool_file_cmd",*)
func_to_tool_file_result=$1
@@ -1687,7 +3065,7 @@ func_to_tool_file ()
# Copy ARG to func_to_host_file_result.
func_convert_file_noop ()
{
- func_to_host_file_result="$1"
+ func_to_host_file_result=$1
}
# end func_convert_file_noop
@@ -1698,11 +3076,12 @@ func_convert_file_noop ()
# func_to_host_file_result.
func_convert_file_msys_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result=$func_convert_core_msys_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
@@ -1714,8 +3093,9 @@ func_convert_file_msys_to_w32 ()
# func_to_host_file_result.
func_convert_file_cygwin_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
# because $build is cygwin, we call "the" cygpath in $PATH; no need to use
# LT_CYGPATH in this case.
@@ -1731,11 +3111,12 @@ func_convert_file_cygwin_to_w32 ()
# and a working winepath. Returns result in func_to_host_file_result.
func_convert_file_nix_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_file_wine_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
@@ -1747,12 +3128,13 @@ func_convert_file_nix_to_w32 ()
# Returns result in func_to_host_file_result.
func_convert_file_msys_to_cygwin ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
func_cygpath -u "$func_convert_core_msys_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
+ func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
@@ -1765,13 +3147,14 @@ func_convert_file_msys_to_cygwin ()
# in func_to_host_file_result.
func_convert_file_nix_to_cygwin ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
# convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
func_convert_core_file_wine_to_w32 "$1"
func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
+ func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
@@ -1781,7 +3164,7 @@ func_convert_file_nix_to_cygwin ()
#############################################
# $build to $host PATH CONVERSION FUNCTIONS #
#############################################
-# invoked via `$to_host_path_cmd ARG'
+# invoked via '$to_host_path_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# The result will be available in $func_to_host_path_result.
@@ -1805,10 +3188,11 @@ func_convert_file_nix_to_cygwin ()
to_host_path_cmd=
func_init_to_host_path_cmd ()
{
- $opt_debug
+ $debug_cmd
+
if test -z "$to_host_path_cmd"; then
func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
- to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ to_host_path_cmd=func_convert_path_$func_stripname_result
fi
}
@@ -1818,7 +3202,8 @@ func_init_to_host_path_cmd ()
# in func_to_host_path_result.
func_to_host_path ()
{
- $opt_debug
+ $debug_cmd
+
func_init_to_host_path_cmd
$to_host_path_cmd "$1"
}
@@ -1829,7 +3214,7 @@ func_to_host_path ()
# Copy ARG to func_to_host_path_result.
func_convert_path_noop ()
{
- func_to_host_path_result="$1"
+ func_to_host_path_result=$1
}
# end func_convert_path_noop
@@ -1840,8 +3225,9 @@ func_convert_path_noop ()
# func_to_host_path_result.
func_convert_path_msys_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from ARG. MSYS
# behavior is inconsistent here; cygpath turns them into '.;' and ';.';
@@ -1849,7 +3235,7 @@ func_convert_path_msys_to_w32 ()
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result=$func_convert_core_msys_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
@@ -1863,8 +3249,9 @@ func_convert_path_msys_to_w32 ()
# func_to_host_file_result.
func_convert_path_cygwin_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
@@ -1883,14 +3270,15 @@ func_convert_path_cygwin_to_w32 ()
# a working winepath. Returns result in func_to_host_file_result.
func_convert_path_nix_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
@@ -1904,15 +3292,16 @@ func_convert_path_nix_to_w32 ()
# Returns result in func_to_host_file_result.
func_convert_path_msys_to_cygwin ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
+ func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
@@ -1927,8 +3316,9 @@ func_convert_path_msys_to_cygwin ()
# func_to_host_file_result.
func_convert_path_nix_to_cygwin ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from
# ARG. msys behavior is inconsistent here, cygpath turns them
@@ -1937,7 +3327,7 @@ func_convert_path_nix_to_cygwin ()
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
+ func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
@@ -1946,13 +3336,31 @@ func_convert_path_nix_to_cygwin ()
# end func_convert_path_nix_to_cygwin
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+ $debug_cmd
+
+ func_dll_def_p_tmp=`$SED -n \
+ -e 's/^[ ]*//' \
+ -e '/^\(;.*\)*$/d' \
+ -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \
+ -e q \
+ "$1"`
+ test DEF = "$func_dll_def_p_tmp"
+}
+
+
# func_mode_compile arg...
func_mode_compile ()
{
- $opt_debug
+ $debug_cmd
+
# Get the compilation command and the source file.
base_compile=
- srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ srcfile=$nonopt # always keep a non-empty value in "srcfile"
suppress_opt=yes
suppress_output=
arg_mode=normal
@@ -1965,12 +3373,12 @@ func_mode_compile ()
case $arg_mode in
arg )
# do not "continue". Instead, add this to base_compile
- lastarg="$arg"
+ lastarg=$arg
arg_mode=normal
;;
target )
- libobj="$arg"
+ libobj=$arg
arg_mode=normal
continue
;;
@@ -1980,7 +3388,7 @@ func_mode_compile ()
case $arg in
-o)
test -n "$libobj" && \
- func_fatal_error "you cannot specify \`-o' more than once"
+ func_fatal_error "you cannot specify '-o' more than once"
arg_mode=target
continue
;;
@@ -2009,12 +3417,12 @@ func_mode_compile ()
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
lastarg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for arg in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_append_quoted lastarg "$arg"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$lastarg"
lastarg=$func_stripname_result
@@ -2027,8 +3435,8 @@ func_mode_compile ()
# Accept the current argument as the source file.
# The previous "srcfile" becomes the current argument.
#
- lastarg="$srcfile"
- srcfile="$arg"
+ lastarg=$srcfile
+ srcfile=$arg
;;
esac # case $arg
;;
@@ -2043,13 +3451,13 @@ func_mode_compile ()
func_fatal_error "you must specify an argument for -Xcompile"
;;
target)
- func_fatal_error "you must specify a target with \`-o'"
+ func_fatal_error "you must specify a target with '-o'"
;;
*)
# Get the name of the library object.
test -z "$libobj" && {
func_basename "$srcfile"
- libobj="$func_basename_result"
+ libobj=$func_basename_result
}
;;
esac
@@ -2069,7 +3477,7 @@ func_mode_compile ()
case $libobj in
*.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
*)
- func_fatal_error "cannot determine name of library object from \`$libobj'"
+ func_fatal_error "cannot determine name of library object from '$libobj'"
;;
esac
@@ -2078,8 +3486,8 @@ func_mode_compile ()
for arg in $later; do
case $arg in
-shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
+ test yes = "$build_libtool_libs" \
+ || func_fatal_configuration "cannot build a shared library"
build_old_libs=no
continue
;;
@@ -2105,17 +3513,17 @@ func_mode_compile ()
func_quote_for_eval "$libobj"
test "X$libobj" != "X$func_quote_for_eval_result" \
&& $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
- && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ && func_warning "libobj name '$libobj' may not contain shell special characters."
func_dirname_and_basename "$obj" "/" ""
- objname="$func_basename_result"
- xdir="$func_dirname_result"
- lobj=${xdir}$objdir/$objname
+ objname=$func_basename_result
+ xdir=$func_dirname_result
+ lobj=$xdir$objdir/$objname
test -z "$base_compile" && \
func_fatal_help "you must specify a compilation command"
# Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
removelist="$obj $lobj $libobj ${libobj}T"
else
removelist="$lobj $libobj ${libobj}T"
@@ -2127,16 +3535,16 @@ func_mode_compile ()
pic_mode=default
;;
esac
- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
# non-PIC code in shared libraries is not supported
pic_mode=default
fi
# Calculate the filename of the output object if compiler does
# not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
+ if test no = "$compiler_c_o"; then
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
+ lockfile=$output_obj.lock
else
output_obj=
need_locks=no
@@ -2145,12 +3553,12 @@ func_mode_compile ()
# Lock this critical section if it is needed
# We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
+ if test yes = "$need_locks"; then
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
sleep 2
done
- elif test "$need_locks" = warn; then
+ elif test warn = "$need_locks"; then
if test -f "$lockfile"; then
$ECHO "\
*** ERROR, $lockfile exists and contains:
@@ -2158,7 +3566,7 @@ func_mode_compile ()
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
@@ -2180,11 +3588,11 @@ compiler."
qsrcfile=$func_quote_for_eval_result
# Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
# Without this assignment, base_compile gets emptied.
fbsd_hideous_sh_bug=$base_compile
- if test "$pic_mode" != no; then
+ if test no != "$pic_mode"; then
command="$base_compile $qsrcfile $pic_flag"
else
# Don't build PIC code
@@ -2201,7 +3609,7 @@ compiler."
func_show_eval_locale "$command" \
'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
- if test "$need_locks" = warn &&
+ if test warn = "$need_locks" &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
@@ -2212,7 +3620,7 @@ $srcfile
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
@@ -2228,20 +3636,20 @@ compiler."
fi
# Allow error messages only from the first compilation.
- if test "$suppress_opt" = yes; then
+ if test yes = "$suppress_opt"; then
suppress_output=' >/dev/null 2>&1'
fi
fi
# Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- if test "$pic_mode" != yes; then
+ if test yes = "$build_old_libs"; then
+ if test yes != "$pic_mode"; then
# Don't build PIC code
command="$base_compile $qsrcfile$pie_flag"
else
command="$base_compile $qsrcfile $pic_flag"
fi
- if test "$compiler_c_o" = yes; then
+ if test yes = "$compiler_c_o"; then
func_append command " -o $obj"
fi
@@ -2250,7 +3658,7 @@ compiler."
func_show_eval_locale "$command" \
'$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
- if test "$need_locks" = warn &&
+ if test warn = "$need_locks" &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
@@ -2261,7 +3669,7 @@ $srcfile
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
@@ -2281,7 +3689,7 @@ compiler."
func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
# Unlock the critical section if it was locked
- if test "$need_locks" != no; then
+ if test no != "$need_locks"; then
removelist=$lockfile
$RM "$lockfile"
fi
@@ -2291,7 +3699,7 @@ compiler."
}
$opt_help || {
- test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+ test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
}
func_mode_help ()
@@ -2311,7 +3719,7 @@ func_mode_help ()
Remove files from the build directory.
RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
to RM.
If FILE is a libtool library, object or program, all the files associated
@@ -2330,16 +3738,16 @@ This mode accepts the following additional options:
-no-suppress do not suppress compiler output for multiple passes
-prefer-pic try to build PIC objects only
-prefer-non-pic try to build non-PIC objects only
- -shared do not build a \`.o' file suitable for static linking
- -static only build a \`.o' file suitable for static linking
+ -shared do not build a '.o' file suitable for static linking
+ -static only build a '.o' file suitable for static linking
-Wc,FLAG pass FLAG directly to the compiler
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
from the given SOURCEFILE.
The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
;;
execute)
@@ -2352,7 +3760,7 @@ This mode accepts the following additional options:
-dlopen FILE add the directory containing FILE to the library path
-This mode sets the library path environment variable according to \`-dlopen'
+This mode sets the library path environment variable according to '-dlopen'
flags.
If any of the ARGS are libtool executable wrappers, then they are translated
@@ -2371,7 +3779,7 @@ Complete the installation of libtool libraries.
Each LIBDIR is a directory that contains libtool libraries.
The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
+the '--dry-run' option if you just want to see what would be executed."
;;
install)
@@ -2381,7 +3789,7 @@ the \`--dry-run' option if you just want to see what would be executed."
Install executables or libraries.
INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
+either the 'install' or 'cp' program.
The following components of INSTALL-COMMAND are treated specially:
@@ -2407,7 +3815,7 @@ The following components of LINK-COMMAND are treated specially:
-avoid-version do not add a version suffix if possible
-bindir BINDIR specify path to binaries directory (for systems where
libraries must be found in the PATH setting at runtime)
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
@@ -2421,7 +3829,8 @@ The following components of LINK-COMMAND are treated specially:
-no-install link a not-installable executable
-no-undefined declare that a library does not refer to external symbols
-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
+ -objectlist FILE use a list of object files found in FILE to specify objects
+ -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes)
-precious-files-regex REGEX
don't remove output files matching REGEX
-release RELEASE specify package release information
@@ -2441,20 +3850,20 @@ The following components of LINK-COMMAND are treated specially:
-Xlinker FLAG pass linker-specific FLAG directly to the linker
-XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
-All other options (arguments beginning with \`-') are ignored.
+All other options (arguments beginning with '-') are ignored.
-Every other argument is treated as a filename. Files ending in \`.la' are
+Every other argument is treated as a filename. Files ending in '.la' are
treated as uninstalled libtool libraries, other files are standard or library
object files.
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
required, except when creating a convenience library.
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
is created, otherwise an executable program is created."
;;
@@ -2465,7 +3874,7 @@ is created, otherwise an executable program is created."
Remove libraries from an installation directory.
RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
to RM.
If FILE is a libtool library, all the files associated with it are deleted.
@@ -2473,17 +3882,17 @@ Otherwise, only FILE itself is deleted using RM."
;;
*)
- func_fatal_help "invalid operation mode \`$opt_mode'"
+ func_fatal_help "invalid operation mode '$opt_mode'"
;;
esac
echo
- $ECHO "Try \`$progname --help' for more information about other modes."
+ $ECHO "Try '$progname --help' for more information about other modes."
}
# Now that we've collected a possible --mode arg, show help if necessary
if $opt_help; then
- if test "$opt_help" = :; then
+ if test : = "$opt_help"; then
func_mode_help
else
{
@@ -2491,7 +3900,7 @@ if $opt_help; then
for opt_mode in compile link execute install finish uninstall clean; do
func_mode_help
done
- } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ } | $SED -n '1p; 2,$s/^Usage:/ or: /p'
{
func_help noexit
for opt_mode in compile link execute install finish uninstall clean; do
@@ -2499,7 +3908,7 @@ if $opt_help; then
func_mode_help
done
} |
- sed '1d
+ $SED '1d
/^When reporting/,/^Report/{
H
d
@@ -2516,16 +3925,17 @@ fi
# func_mode_execute arg...
func_mode_execute ()
{
- $opt_debug
+ $debug_cmd
+
# The first argument is the command name.
- cmd="$nonopt"
+ cmd=$nonopt
test -z "$cmd" && \
func_fatal_help "you must specify a COMMAND"
# Handle -dlopen flags immediately.
for file in $opt_dlopen; do
test -f "$file" \
- || func_fatal_help "\`$file' is not a file"
+ || func_fatal_help "'$file' is not a file"
dir=
case $file in
@@ -2535,7 +3945,7 @@ func_mode_execute ()
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$lib' is not a valid libtool archive"
+ || func_fatal_help "'$lib' is not a valid libtool archive"
# Read the libtool library.
dlname=
@@ -2546,18 +3956,18 @@ func_mode_execute ()
if test -z "$dlname"; then
# Warn if it was a shared library.
test -n "$library_names" && \
- func_warning "\`$file' was not linked with \`-export-dynamic'"
+ func_warning "'$file' was not linked with '-export-dynamic'"
continue
fi
func_dirname "$file" "" "."
- dir="$func_dirname_result"
+ dir=$func_dirname_result
if test -f "$dir/$objdir/$dlname"; then
func_append dir "/$objdir"
else
if test ! -f "$dir/$dlname"; then
- func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
fi
fi
;;
@@ -2565,18 +3975,18 @@ func_mode_execute ()
*.lo)
# Just add the directory containing the .lo file.
func_dirname "$file" "" "."
- dir="$func_dirname_result"
+ dir=$func_dirname_result
;;
*)
- func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
continue
;;
esac
# Get the absolute pathname.
absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
+ test -n "$absdir" && dir=$absdir
# Now add the directory to shlibpath_var.
if eval "test -z \"\$$shlibpath_var\""; then
@@ -2588,7 +3998,7 @@ func_mode_execute ()
# This variable tells wrapper scripts just to set shlibpath_var
# rather than running their programs.
- libtool_execute_magic="$magic"
+ libtool_execute_magic=$magic
# Check if any of the arguments is a wrapper script.
args=
@@ -2601,12 +4011,12 @@ func_mode_execute ()
if func_ltwrapper_script_p "$file"; then
func_source "$file"
# Transform arg to wrapped name.
- file="$progdir/$program"
+ file=$progdir/$program
elif func_ltwrapper_executable_p "$file"; then
func_ltwrapper_scriptname "$file"
func_source "$func_ltwrapper_scriptname_result"
# Transform arg to wrapped name.
- file="$progdir/$program"
+ file=$progdir/$program
fi
;;
esac
@@ -2614,7 +4024,15 @@ func_mode_execute ()
func_append_quoted args "$file"
done
- if test "X$opt_dry_run" = Xfalse; then
+ if $opt_dry_run; then
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ else
if test -n "$shlibpath_var"; then
# Export the shlibpath_var.
eval "export $shlibpath_var"
@@ -2631,25 +4049,18 @@ func_mode_execute ()
done
# Now prepare to actually exec the command.
- exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
- echo "export $shlibpath_var"
- fi
- $ECHO "$cmd$args"
- exit $EXIT_SUCCESS
+ exec_cmd=\$cmd$args
fi
}
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
# func_mode_finish arg...
func_mode_finish ()
{
- $opt_debug
+ $debug_cmd
+
libs=
libdirs=
admincmds=
@@ -2663,11 +4074,11 @@ func_mode_finish ()
if func_lalib_unsafe_p "$opt"; then
func_append libs " $opt"
else
- func_warning "\`$opt' is not a valid libtool archive"
+ func_warning "'$opt' is not a valid libtool archive"
fi
else
- func_fatal_error "invalid argument \`$opt'"
+ func_fatal_error "invalid argument '$opt'"
fi
done
@@ -2682,12 +4093,12 @@ func_mode_finish ()
# Remove sysroot references
if $opt_dry_run; then
for lib in $libs; do
- echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ echo "removing references to $lt_sysroot and '=' prefixes from $lib"
done
else
tmpdir=`func_mktempdir`
for lib in $libs; do
- sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
> $tmpdir/tmp-la
mv -f $tmpdir/tmp-la $lib
done
@@ -2712,7 +4123,7 @@ func_mode_finish ()
fi
# Exit here if they wanted silent mode.
- $opt_silent && exit $EXIT_SUCCESS
+ $opt_quiet && exit $EXIT_SUCCESS
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
echo "----------------------------------------------------------------------"
@@ -2723,27 +4134,27 @@ func_mode_finish ()
echo
echo "If you ever happen to want to link against installed libraries"
echo "in a given directory, LIBDIR, you must either use libtool, and"
- echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "specify the full pathname of the library, or use the '-LLIBDIR'"
echo "flag during linking and do at least one of the following:"
if test -n "$shlibpath_var"; then
- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " - add LIBDIR to the '$shlibpath_var' environment variable"
echo " during execution"
fi
if test -n "$runpath_var"; then
- echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " - add LIBDIR to the '$runpath_var' environment variable"
echo " during linking"
fi
if test -n "$hardcode_libdir_flag_spec"; then
libdir=LIBDIR
eval flag=\"$hardcode_libdir_flag_spec\"
- $ECHO " - use the \`$flag' linker flag"
+ $ECHO " - use the '$flag' linker flag"
fi
if test -n "$admincmds"; then
$ECHO " - have your system administrator run these commands:$admincmds"
fi
if test -f /etc/ld.so.conf; then
- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
fi
echo
@@ -2762,18 +4173,20 @@ func_mode_finish ()
exit $EXIT_SUCCESS
}
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
# func_mode_install arg...
func_mode_install ()
{
- $opt_debug
+ $debug_cmd
+
# There may be an optional sh(1) argument at the beginning of
# install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
# Allow the use of GNU shtool's install command.
- case $nonopt in *shtool*) :;; *) false;; esac; then
+ case $nonopt in *shtool*) :;; *) false;; esac
+ then
# Aesthetically quote it.
func_quote_for_eval "$nonopt"
install_prog="$func_quote_for_eval_result "
@@ -2800,7 +4213,7 @@ func_mode_install ()
opts=
prev=
install_type=
- isdir=no
+ isdir=false
stripme=
no_mode=:
for arg
@@ -2813,7 +4226,7 @@ func_mode_install ()
fi
case $arg in
- -d) isdir=yes ;;
+ -d) isdir=: ;;
-f)
if $install_cp; then :; else
prev=$arg
@@ -2831,7 +4244,7 @@ func_mode_install ()
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
- if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ if test X-m = "X$prev" && test -n "$install_override_mode"; then
arg2=$install_override_mode
no_mode=false
fi
@@ -2856,7 +4269,7 @@ func_mode_install ()
func_fatal_help "you must specify an install program"
test -n "$prev" && \
- func_fatal_help "the \`$prev' option requires an argument"
+ func_fatal_help "the '$prev' option requires an argument"
if test -n "$install_override_mode" && $no_mode; then
if $install_cp; then :; else
@@ -2878,19 +4291,19 @@ func_mode_install ()
dest=$func_stripname_result
# Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
+ test -d "$dest" && isdir=:
+ if $isdir; then
+ destdir=$dest
destname=
else
func_dirname_and_basename "$dest" "" "."
- destdir="$func_dirname_result"
- destname="$func_basename_result"
+ destdir=$func_dirname_result
+ destname=$func_basename_result
# Not a directory, so check to see that there is only one file specified.
set dummy $files; shift
test "$#" -gt 1 && \
- func_fatal_help "\`$dest' is not a directory"
+ func_fatal_help "'$dest' is not a directory"
fi
case $destdir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
@@ -2899,7 +4312,7 @@ func_mode_install ()
case $file in
*.lo) ;;
*)
- func_fatal_help "\`$destdir' must be an absolute directory name"
+ func_fatal_help "'$destdir' must be an absolute directory name"
;;
esac
done
@@ -2908,7 +4321,7 @@ func_mode_install ()
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
- libtool_install_magic="$magic"
+ libtool_install_magic=$magic
staticlibs=
future_libdirs=
@@ -2928,7 +4341,7 @@ func_mode_install ()
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$file' is not a valid libtool archive"
+ || func_fatal_help "'$file' is not a valid libtool archive"
library_names=
old_library=
@@ -2950,7 +4363,7 @@ func_mode_install ()
fi
func_dirname "$file" "/" ""
- dir="$func_dirname_result"
+ dir=$func_dirname_result
func_append dir "$objdir"
if test -n "$relink_command"; then
@@ -2964,7 +4377,7 @@ func_mode_install ()
# are installed into $libdir/../bin (currently, that works fine)
# but it's something to keep an eye on.
test "$inst_prefix_dir" = "$destdir" && \
- func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+ func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
@@ -2973,29 +4386,36 @@ func_mode_install ()
relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
fi
- func_warning "relinking \`$file'"
+ func_warning "relinking '$file'"
func_show_eval "$relink_command" \
- 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
fi
# See the names of the shared library.
set dummy $library_names; shift
if test -n "$1"; then
- realname="$1"
+ realname=$1
shift
- srcname="$realname"
- test -n "$relink_command" && srcname="$realname"T
+ srcname=$realname
+ test -n "$relink_command" && srcname=${realname}T
# Install the shared library and build the symlinks.
func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
'exit $?'
- tstripme="$stripme"
+ tstripme=$stripme
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
case $realname in
*.dll.a)
- tstripme=""
+ tstripme=
+ ;;
+ esac
+ ;;
+ os2*)
+ case $realname in
+ *_dll.a)
+ tstripme=
;;
esac
;;
@@ -3006,7 +4426,7 @@ func_mode_install ()
if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
- # Try `ln -sf' first, because the `ln' binary might depend on
+ # Try 'ln -sf' first, because the 'ln' binary might depend on
# the symlink we replace! Solaris /bin/ln does not understand -f,
# so we also need to try rm && ln -s.
for linkname
@@ -3017,14 +4437,14 @@ func_mode_install ()
fi
# Do each command in the postinstall commands.
- lib="$destdir/$realname"
+ lib=$destdir/$realname
func_execute_cmds "$postinstall_cmds" 'exit $?'
fi
# Install the pseudo-library for information purposes.
func_basename "$file"
- name="$func_basename_result"
- instname="$dir/$name"i
+ name=$func_basename_result
+ instname=$dir/${name}i
func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
# Maybe install the static library, too.
@@ -3036,11 +4456,11 @@ func_mode_install ()
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
- destfile="$destdir/$destname"
+ destfile=$destdir/$destname
else
func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
fi
# Deduce the name of the destination old-style object file.
@@ -3050,11 +4470,11 @@ func_mode_install ()
staticdest=$func_lo2o_result
;;
*.$objext)
- staticdest="$destfile"
+ staticdest=$destfile
destfile=
;;
*)
- func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ func_fatal_help "cannot copy a libtool object to '$destfile'"
;;
esac
@@ -3063,7 +4483,7 @@ func_mode_install ()
func_show_eval "$install_prog $file $destfile" 'exit $?'
# Install the old object if enabled.
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
# Deduce the name of the old-style object file.
func_lo2o "$file"
staticobj=$func_lo2o_result
@@ -3075,23 +4495,23 @@ func_mode_install ()
*)
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
- destfile="$destdir/$destname"
+ destfile=$destdir/$destname
else
func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
fi
# If the file is missing, and there is a .exe on the end, strip it
# because it is most likely a libtool script we actually want to
# install
- stripped_ext=""
+ stripped_ext=
case $file in
*.exe)
if test ! -f "$file"; then
func_stripname '' '.exe' "$file"
file=$func_stripname_result
- stripped_ext=".exe"
+ stripped_ext=.exe
fi
;;
esac
@@ -3119,19 +4539,19 @@ func_mode_install ()
# Check the variables that should have been set.
test -z "$generated_by_libtool_version" && \
- func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+ func_fatal_error "invalid libtool wrapper script '$wrapper'"
- finalize=yes
+ finalize=:
for lib in $notinst_deplibs; do
# Check to see that each library is installed.
libdir=
if test -f "$lib"; then
func_source "$lib"
fi
- libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
if test -n "$libdir" && test ! -f "$libfile"; then
- func_warning "\`$lib' has not been installed in \`$libdir'"
- finalize=no
+ func_warning "'$lib' has not been installed in '$libdir'"
+ finalize=false
fi
done
@@ -3139,29 +4559,29 @@ func_mode_install ()
func_source "$wrapper"
outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
+ if test no = "$fast_install" && test -n "$relink_command"; then
$opt_dry_run || {
- if test "$finalize" = yes; then
+ if $finalize; then
tmpdir=`func_mktempdir`
func_basename "$file$stripped_ext"
- file="$func_basename_result"
- outputname="$tmpdir/$file"
+ file=$func_basename_result
+ outputname=$tmpdir/$file
# Replace the output file specification.
relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
- $opt_silent || {
+ $opt_quiet || {
func_quote_for_expand "$relink_command"
eval "func_echo $func_quote_for_expand_result"
}
if eval "$relink_command"; then :
else
- func_error "error: relink \`$file' with the above command before installing it"
+ func_error "error: relink '$file' with the above command before installing it"
$opt_dry_run || ${RM}r "$tmpdir"
continue
fi
- file="$outputname"
+ file=$outputname
else
- func_warning "cannot relink \`$file'"
+ func_warning "cannot relink '$file'"
fi
}
else
@@ -3198,10 +4618,10 @@ func_mode_install ()
for file in $staticlibs; do
func_basename "$file"
- name="$func_basename_result"
+ name=$func_basename_result
# Set up the ranlib parameters.
- oldlib="$destdir/$name"
+ oldlib=$destdir/$name
func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
tool_oldlib=$func_to_tool_file_result
@@ -3216,18 +4636,18 @@ func_mode_install ()
done
test -n "$future_libdirs" && \
- func_warning "remember to run \`$progname --finish$future_libdirs'"
+ func_warning "remember to run '$progname --finish$future_libdirs'"
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
$opt_dry_run && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
else
exit $EXIT_SUCCESS
fi
}
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
# func_generate_dlsyms outputname originator pic_p
@@ -3235,16 +4655,17 @@ test "$opt_mode" = install && func_mode_install ${1+"$@"}
# a dlpreopen symbol table.
func_generate_dlsyms ()
{
- $opt_debug
- my_outputname="$1"
- my_originator="$2"
- my_pic_p="${3-no}"
- my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ $debug_cmd
+
+ my_outputname=$1
+ my_originator=$2
+ my_pic_p=${3-false}
+ my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
my_dlsyms=
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
if test -n "$NM" && test -n "$global_symbol_pipe"; then
- my_dlsyms="${my_outputname}S.c"
+ my_dlsyms=${my_outputname}S.c
else
func_error "not configured to extract global symbols from dlpreopened files"
fi
@@ -3255,7 +4676,7 @@ func_generate_dlsyms ()
"") ;;
*.c)
# Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${my_outputname}.nm"
+ nlist=$output_objdir/$my_outputname.nm
func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
@@ -3263,34 +4684,36 @@ func_generate_dlsyms ()
func_verbose "creating $output_objdir/$my_dlsyms"
$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
#ifdef __cplusplus
extern \"C\" {
#endif
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
#endif
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT_DLSYM_CONST
#else
# define LT_DLSYM_CONST const
#endif
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
/* External symbol declarations for the compiler. */\
"
- if test "$dlself" = yes; then
- func_verbose "generating symbol list for \`$output'"
+ if test yes = "$dlself"; then
+ func_verbose "generating symbol list for '$output'"
$opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
@@ -3298,7 +4721,7 @@ extern \"C\" {
progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
for progfile in $progfiles; do
func_to_tool_file "$progfile" func_convert_file_msys_to_w32
- func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
$opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
done
@@ -3318,10 +4741,10 @@ extern \"C\" {
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
+ export_symbols=$output_objdir/$outputname.exp
$opt_dry_run || {
$RM $export_symbols
- eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
case $host in
*cygwin* | *mingw* | *cegcc* )
eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
@@ -3331,7 +4754,7 @@ extern \"C\" {
}
else
$opt_dry_run || {
- eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
case $host in
@@ -3345,22 +4768,22 @@ extern \"C\" {
fi
for dlprefile in $dlprefiles; do
- func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_verbose "extracting global C symbols from '$dlprefile'"
func_basename "$dlprefile"
- name="$func_basename_result"
+ name=$func_basename_result
case $host in
*cygwin* | *mingw* | *cegcc* )
# if an import library, we need to obtain dlname
if func_win32_import_lib_p "$dlprefile"; then
func_tr_sh "$dlprefile"
eval "curr_lafile=\$libfile_$func_tr_sh_result"
- dlprefile_dlbasename=""
+ dlprefile_dlbasename=
if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
# Use subshell, to avoid clobbering current variable values
dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
- if test -n "$dlprefile_dlname" ; then
+ if test -n "$dlprefile_dlname"; then
func_basename "$dlprefile_dlname"
- dlprefile_dlbasename="$func_basename_result"
+ dlprefile_dlbasename=$func_basename_result
else
# no lafile. user explicitly requested -dlpreopen <import library>.
$sharedlib_from_linklib_cmd "$dlprefile"
@@ -3368,7 +4791,7 @@ extern \"C\" {
fi
fi
$opt_dry_run || {
- if test -n "$dlprefile_dlbasename" ; then
+ if test -n "$dlprefile_dlbasename"; then
eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
else
func_warning "Could not compute DLL name from $name"
@@ -3424,6 +4847,11 @@ extern \"C\" {
echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
fi
+ func_show_eval '$RM "${nlist}I"'
+ if test -n "$global_symbol_to_import"; then
+ eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+ fi
+
echo >> "$output_objdir/$my_dlsyms" "\
/* The mapping between symbol names and symbols. */
@@ -3432,11 +4860,30 @@ typedef struct {
void *address;
} lt_dlsymlist;
extern LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
+lt_${my_prefix}_LTX_preloaded_symbols[];\
+"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+ LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+ for (; symbol->name; ++symbol)
+ {"
+ $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+ echo >> "$output_objdir/$my_dlsyms" "\
+ }
+}"
+ fi
+ echo >> "$output_objdir/$my_dlsyms" "\
LT_DLSYM_CONST lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
- { \"$my_originator\", (void *) 0 },"
+{ {\"$my_originator\", (void *) 0},"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {\"@INIT@\", (void *) <_syminit},"
+ fi
case $need_lib_prefix in
no)
@@ -3478,9 +4925,7 @@ static const void *lt_preloaded_setup() {
*-*-hpux*)
pic_flag_for_symtable=" $pic_flag" ;;
*)
- if test "X$my_pic_p" != Xno; then
- pic_flag_for_symtable=" $pic_flag"
- fi
+ $my_pic_p && pic_flag_for_symtable=" $pic_flag"
;;
esac
;;
@@ -3497,10 +4942,10 @@ static const void *lt_preloaded_setup() {
func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
# Clean up the generated files.
- func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
# Transform the symbol file into the correct name.
- symfileobj="$output_objdir/${my_outputname}S.$objext"
+ symfileobj=$output_objdir/${my_outputname}S.$objext
case $host in
*cygwin* | *mingw* | *cegcc* )
if test -f "$output_objdir/$my_outputname.def"; then
@@ -3518,7 +4963,7 @@ static const void *lt_preloaded_setup() {
esac
;;
*)
- func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ func_fatal_error "unknown suffix for '$my_dlsyms'"
;;
esac
else
@@ -3532,6 +4977,32 @@ static const void *lt_preloaded_setup() {
fi
}
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
# func_win32_libid arg
# return the library type of file 'arg'
#
@@ -3541,8 +5012,9 @@ static const void *lt_preloaded_setup() {
# Despite the name, also deal with 64 bit binaries.
func_win32_libid ()
{
- $opt_debug
- win32_libid_type="unknown"
+ $debug_cmd
+
+ win32_libid_type=unknown
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
*ar\ archive\ import\ library*) # definitely import
@@ -3552,16 +5024,29 @@ func_win32_libid ()
# Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
$EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
- $SED -n -e '
+ case $nm_interface in
+ "MS dumpbin")
+ if func_cygming_ms_implib_p "$1" ||
+ func_cygming_gnu_implib_p "$1"
+ then
+ win32_nmres=import
+ else
+ win32_nmres=
+ fi
+ ;;
+ *)
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
1,100{
/ I /{
- s,.*,import,
+ s|.*|import|
p
q
}
}'`
+ ;;
+ esac
case $win32_nmres in
import*) win32_libid_type="x86 archive import";;
*) win32_libid_type="x86 archive static";;
@@ -3593,7 +5078,8 @@ func_win32_libid ()
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib ()
{
- $opt_debug
+ $debug_cmd
+
sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
}
@@ -3610,7 +5096,8 @@ func_cygming_dll_for_implib ()
# specified import library.
func_cygming_dll_for_implib_fallback_core ()
{
- $opt_debug
+ $debug_cmd
+
match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
$OBJDUMP -s --section "$1" "$2" 2>/dev/null |
$SED '/^Contents of section '"$match_literal"':/{
@@ -3646,8 +5133,8 @@ func_cygming_dll_for_implib_fallback_core ()
/./p' |
# we now have a list, one entry per line, of the stringified
# contents of the appropriate section of all members of the
- # archive which possess that section. Heuristic: eliminate
- # all those which have a first or second character that is
+ # archive that possess that section. Heuristic: eliminate
+ # all those that have a first or second character that is
# a '.' (that is, objdump's representation of an unprintable
# character.) This should work for all archives with less than
# 0x302f exports -- but will fail for DLLs whose name actually
@@ -3658,30 +5145,6 @@ func_cygming_dll_for_implib_fallback_core ()
$SED -e '/^\./d;/^.\./d;q'
}
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
- test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
- test -n "$func_cygming_ms_implib_tmp"
-}
-
# func_cygming_dll_for_implib_fallback ARG
# Platform-specific function to extract the
# name of the DLL associated with the specified
@@ -3695,16 +5158,17 @@ func_cygming_ms_implib_p ()
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib_fallback ()
{
- $opt_debug
- if func_cygming_gnu_implib_p "$1" ; then
+ $debug_cmd
+
+ if func_cygming_gnu_implib_p "$1"; then
# binutils import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
- elif func_cygming_ms_implib_p "$1" ; then
+ elif func_cygming_ms_implib_p "$1"; then
# ms-generated import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
else
# unknown
- sharedlib_from_linklib_result=""
+ sharedlib_from_linklib_result=
fi
}
@@ -3712,10 +5176,11 @@ func_cygming_dll_for_implib_fallback ()
# func_extract_an_archive dir oldlib
func_extract_an_archive ()
{
- $opt_debug
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
- if test "$lock_old_archive_extraction" = yes; then
+ $debug_cmd
+
+ f_ex_an_ar_dir=$1; shift
+ f_ex_an_ar_oldlib=$1
+ if test yes = "$lock_old_archive_extraction"; then
lockfile=$f_ex_an_ar_oldlib.lock
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
@@ -3724,7 +5189,7 @@ func_extract_an_archive ()
fi
func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
'stat=$?; rm -f "$lockfile"; exit $stat'
- if test "$lock_old_archive_extraction" = yes; then
+ if test yes = "$lock_old_archive_extraction"; then
$opt_dry_run || rm -f "$lockfile"
fi
if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
@@ -3738,22 +5203,23 @@ func_extract_an_archive ()
# func_extract_archives gentop oldlib ...
func_extract_archives ()
{
- $opt_debug
- my_gentop="$1"; shift
+ $debug_cmd
+
+ my_gentop=$1; shift
my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
+ my_oldobjs=
+ my_xlib=
+ my_xabs=
+ my_xdir=
for my_xlib in $my_oldlibs; do
# Extract the objects.
case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
*) my_xabs=`pwd`"/$my_xlib" ;;
esac
func_basename "$my_xlib"
- my_xlib="$func_basename_result"
+ my_xlib=$func_basename_result
my_xlib_u=$my_xlib
while :; do
case " $extracted_archives " in
@@ -3765,7 +5231,7 @@ func_extract_archives ()
esac
done
extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
+ my_xdir=$my_gentop/$my_xlib_u
func_mkdir_p "$my_xdir"
@@ -3778,22 +5244,23 @@ func_extract_archives ()
cd $my_xdir || exit $?
darwin_archive=$my_xabs
darwin_curdir=`pwd`
- darwin_base_archive=`basename "$darwin_archive"`
+ func_basename "$darwin_archive"
+ darwin_base_archive=$func_basename_result
darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
if test -n "$darwin_arches"; then
darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
darwin_arch=
func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ for darwin_arch in $darwin_arches; do
+ func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+ $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
+ cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+ func_extract_an_archive "`pwd`" "$darwin_base_archive"
cd "$darwin_curdir"
- $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
done # $darwin_arches
## Okay now we've a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
darwin_file=
darwin_files=
for darwin_file in $darwin_filelist; do
@@ -3815,7 +5282,7 @@ func_extract_archives ()
my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
done
- func_extract_archives_result="$my_oldobjs"
+ func_extract_archives_result=$my_oldobjs
}
@@ -3830,7 +5297,7 @@ func_extract_archives ()
#
# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
# variable will take. If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
+# will assume that the directory where it is stored is
# the $objdir directory. This is a cygwin/mingw-specific
# behavior.
func_emit_wrapper ()
@@ -3841,7 +5308,7 @@ func_emit_wrapper ()
#! $SHELL
# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
@@ -3898,9 +5365,9 @@ _LTECHO_EOF'
# Very basic option parsing. These options are (a) specific to
# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
+# /script/ and the wrapper /executable/ that is used only on
# windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
+# (application programs are unlikely to have options that match
# this pattern).
#
# There are only two supported options: --lt-debug and
@@ -3933,7 +5400,7 @@ func_parse_lt_options ()
# Print the debug banner immediately:
if test -n \"\$lt_option_debug\"; then
- echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
fi
}
@@ -3944,7 +5411,7 @@ func_lt_dump_args ()
lt_dump_args_N=1;
for lt_arg
do
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
done
}
@@ -3958,7 +5425,7 @@ func_exec_program_core ()
*-*-mingw | *-*-os2* | *-cegcc*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
@@ -3968,7 +5435,7 @@ func_exec_program_core ()
*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir/\$program\" \${1+\"\$@\"}
@@ -4043,13 +5510,13 @@ func_exec_program ()
test -n \"\$absdir\" && thisdir=\"\$absdir\"
"
- if test "$fast_install" = yes; then
+ if test yes = "$fast_install"; then
$ECHO "\
program=lt-'$outputname'$exeext
progdir=\"\$thisdir/$objdir\"
if test ! -f \"\$progdir/\$program\" ||
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
test \"X\$file\" != \"X\$progdir/\$program\"; }; then
file=\"\$\$-\$program\"
@@ -4066,7 +5533,7 @@ func_exec_program ()
if test -n \"\$relink_command\"; then
if relink_command_output=\`eval \$relink_command 2>&1\`; then :
else
- $ECHO \"\$relink_command_output\" >&2
+ \$ECHO \"\$relink_command_output\" >&2
$RM \"\$progdir/\$file\"
exit 1
fi
@@ -4101,7 +5568,7 @@ func_exec_program ()
fi
# Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
$ECHO "\
# Add our own library path to $shlibpath_var
$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
@@ -4121,7 +5588,7 @@ func_exec_program ()
fi
else
# The program doesn't exist.
- \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
\$ECHO \"This script is just a wrapper for \$program.\" 1>&2
\$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
exit 1
@@ -4140,7 +5607,7 @@ func_emit_cwrapperexe_src ()
cat <<EOF
/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+ Generated by $PROGRAM (GNU $PACKAGE) $VERSION
The $output program cannot be directly executed until all the libtool
libraries that it depends on are installed.
@@ -4175,47 +5642,45 @@ EOF
#include <fcntl.h>
#include <sys/stat.h>
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
/* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
+#if defined __MINGW32__
# ifdef __STRICT_ANSI__
int _putenv (const char *);
# endif
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
# ifdef __STRICT_ANSI__
char *realpath (const char *, char *);
int putenv (char *);
int setenv (const char *, const char *, int);
# endif
-/* #elif defined (other platforms) ... */
+/* #elif defined other_platform || defined ... */
#endif
/* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
+#if defined _MSC_VER
# define setmode _setmode
# define stat _stat
# define chmod _chmod
# define getcwd _getcwd
# define putenv _putenv
# define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-# define _INTPTR_T_DEFINED
-# define intptr_t int
-# endif
-#elif defined(__MINGW32__)
+#elif defined __MINGW32__
# define setmode _setmode
# define stat _stat
# define chmod _chmod
# define getcwd _getcwd
# define putenv _putenv
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
# define HAVE_SETENV
# define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
+/* #elif defined other platforms ... */
#endif
-#if defined(PATH_MAX)
+#if defined PATH_MAX
# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
+#elif defined MAXPATHLEN
# define LT_PATHMAX MAXPATHLEN
#else
# define LT_PATHMAX 1024
@@ -4234,8 +5699,8 @@ int setenv (const char *, const char *, int);
# define PATH_SEPARATOR ':'
#endif
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+ defined __OS2__
# define HAVE_DOS_BASED_FILE_SYSTEM
# define FOPEN_WB "wb"
# ifndef DIR_SEPARATOR_2
@@ -4268,10 +5733,10 @@ int setenv (const char *, const char *, int);
#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
+ if (stale) { free (stale); stale = 0; } \
} while (0)
-#if defined(LT_DEBUGWRAPPER)
+#if defined LT_DEBUGWRAPPER
static int lt_debug = 1;
#else
static int lt_debug = 0;
@@ -4300,11 +5765,16 @@ void lt_dump_script (FILE *f);
EOF
cat <<EOF
-volatile const char * MAGIC_EXE = "$magic_exe";
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+# define externally_visible volatile
+#else
+# define externally_visible __attribute__((externally_visible)) volatile
+#endif
+externally_visible const char * MAGIC_EXE = "$magic_exe";
const char * LIB_PATH_VARNAME = "$shlibpath_var";
EOF
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
func_to_host_path "$temp_rpath"
cat <<EOF
const char * LIB_PATH_VALUE = "$func_to_host_path_result";
@@ -4328,7 +5798,7 @@ const char * EXE_PATH_VALUE = "";
EOF
fi
- if test "$fast_install" = yes; then
+ if test yes = "$fast_install"; then
cat <<EOF
const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
EOF
@@ -4357,12 +5827,12 @@ main (int argc, char *argv[])
char *actual_cwrapper_name;
char *target_name;
char *lt_argv_zero;
- intptr_t rval = 127;
+ int rval = 127;
int i;
program_name = (char *) xstrdup (base_name (argv[0]));
- newargz = XMALLOC (char *, argc + 1);
+ newargz = XMALLOC (char *, (size_t) argc + 1);
/* very simple arg parsing; don't want to rely on getopt
* also, copy all non cwrapper options to newargz, except
@@ -4371,10 +5841,10 @@ main (int argc, char *argv[])
newargc=0;
for (i = 1; i < argc; i++)
{
- if (strcmp (argv[i], dumpscript_opt) == 0)
+ if (STREQ (argv[i], dumpscript_opt))
{
EOF
- case "$host" in
+ case $host in
*mingw* | *cygwin* )
# make stdout use "unix" line endings
echo " setmode(1,_O_BINARY);"
@@ -4385,12 +5855,12 @@ EOF
lt_dump_script (stdout);
return 0;
}
- if (strcmp (argv[i], debug_opt) == 0)
+ if (STREQ (argv[i], debug_opt))
{
lt_debug = 1;
continue;
}
- if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+ if (STREQ (argv[i], ltwrapper_option_prefix))
{
/* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
namespace, but it is not one of the ones we know about and
@@ -4413,7 +5883,7 @@ EOF
EOF
cat <<EOF
/* The GNU banner must be the first non-error debug message */
- lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
EOF
cat <<"EOF"
lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
@@ -4524,7 +5994,7 @@ EOF
cat <<"EOF"
/* execv doesn't actually work on mingw as expected on unix */
newargz = prepare_spawn (newargz);
- rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
if (rval == -1)
{
/* failed to start process */
@@ -4569,7 +6039,7 @@ base_name (const char *name)
{
const char *base;
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
/* Skip over the disk name in MSDOS pathnames. */
if (isalpha ((unsigned char) name[0]) && name[1] == ':')
name += 2;
@@ -4628,7 +6098,7 @@ find_executable (const char *wrapper)
const char *p_next;
/* static buffer for getcwd */
char tmp[LT_PATHMAX + 1];
- int tmp_len;
+ size_t tmp_len;
char *concat_name;
lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
@@ -4638,7 +6108,7 @@ find_executable (const char *wrapper)
return NULL;
/* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
{
concat_name = xstrdup (wrapper);
@@ -4656,7 +6126,7 @@ find_executable (const char *wrapper)
return concat_name;
XFREE (concat_name);
}
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
}
#endif
@@ -4679,7 +6149,7 @@ find_executable (const char *wrapper)
for (q = p; *q; q++)
if (IS_PATH_SEPARATOR (*q))
break;
- p_len = q - p;
+ p_len = (size_t) (q - p);
p_next = (*q == '\0' ? q : q + 1);
if (p_len == 0)
{
@@ -4798,7 +6268,7 @@ strendzap (char *str, const char *pat)
if (patlen <= len)
{
str += len - patlen;
- if (strcmp (str, pat) == 0)
+ if (STREQ (str, pat))
*str = '\0';
}
return str;
@@ -4863,7 +6333,7 @@ lt_setenv (const char *name, const char *value)
char *str = xstrdup (value);
setenv (name, str, 1);
#else
- int len = strlen (name) + 1 + strlen (value) + 1;
+ size_t len = strlen (name) + 1 + strlen (value) + 1;
char *str = XMALLOC (char, len);
sprintf (str, "%s=%s", name, value);
if (putenv (str) != EXIT_SUCCESS)
@@ -4880,8 +6350,8 @@ lt_extend_str (const char *orig_value, const char *add, int to_end)
char *new_value;
if (orig_value && *orig_value)
{
- int orig_value_len = strlen (orig_value);
- int add_len = strlen (add);
+ size_t orig_value_len = strlen (orig_value);
+ size_t add_len = strlen (add);
new_value = XMALLOC (char, add_len + orig_value_len + 1);
if (to_end)
{
@@ -4912,10 +6382,10 @@ lt_update_exe_path (const char *name, const char *value)
{
char *new_value = lt_extend_str (getenv (name), value, 0);
/* some systems can't cope with a ':'-terminated path #' */
- int len = strlen (new_value);
- while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ size_t len = strlen (new_value);
+ while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
{
- new_value[len-1] = '\0';
+ new_value[--len] = '\0';
}
lt_setenv (name, new_value);
XFREE (new_value);
@@ -5082,27 +6552,47 @@ EOF
# True if ARG is an import lib, as indicated by $file_magic_cmd
func_win32_import_lib_p ()
{
- $opt_debug
+ $debug_cmd
+
case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
*import*) : ;;
*) false ;;
esac
}
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+ $debug_cmd
+
+ case " $compile_command " in
+ *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
+ suncc_use_cstd_abi=no
+ ;;
+ *)
+ suncc_use_cstd_abi=yes
+ ;;
+ esac
+}
+
# func_mode_link arg...
func_mode_link ()
{
- $opt_debug
+ $debug_cmd
+
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
# It is impossible to link a dll without this setting, and
# we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
+ # what system we are compiling for in order to pass an extra
# flag for every libtool invocation.
# allow_undefined=no
# FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
+ # to make a dll that has undefined symbols, in which case not
# even a static library is built. For now, we need to specify
# -no-undefined on the libtool link line when we can be certain
# that all symbols are satisfied, otherwise we get a static library.
@@ -5146,10 +6636,11 @@ func_mode_link ()
module=no
no_install=no
objs=
+ os2dllname=
non_pic_objects=
precious_files_regex=
prefer_static_libs=no
- preload=no
+ preload=false
prev=
prevarg=
release=
@@ -5161,7 +6652,7 @@ func_mode_link ()
vinfo=
vinfo_number=no
weak_libs=
- single_module="${wl}-single_module"
+ single_module=$wl-single_module
func_infer_tag $base_compile
# We need to know -static, to get the right output filenames.
@@ -5169,15 +6660,15 @@ func_mode_link ()
do
case $arg in
-shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
+ test yes != "$build_libtool_libs" \
+ && func_fatal_configuration "cannot build a shared library"
build_old_libs=no
break
;;
-all-static | -static | -static-libtool-libs)
case $arg in
-all-static)
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
func_warning "complete static linking is impossible in this configuration"
fi
if test -n "$link_static_flag"; then
@@ -5210,7 +6701,7 @@ func_mode_link ()
# Go through the arguments, transforming them on the way.
while test "$#" -gt 0; do
- arg="$1"
+ arg=$1
shift
func_quote_for_eval "$arg"
qarg=$func_quote_for_eval_unquoted_result
@@ -5227,21 +6718,21 @@ func_mode_link ()
case $prev in
bindir)
- bindir="$arg"
+ bindir=$arg
prev=
continue
;;
dlfiles|dlprefiles)
- if test "$preload" = no; then
+ $preload || {
# Add the symbol object into the linking commands.
func_append compile_command " @SYMFILE@"
func_append finalize_command " @SYMFILE@"
- preload=yes
- fi
+ preload=:
+ }
case $arg in
*.la | *.lo) ;; # We handle these cases below.
force)
- if test "$dlself" = no; then
+ if test no = "$dlself"; then
dlself=needless
export_dynamic=yes
fi
@@ -5249,9 +6740,9 @@ func_mode_link ()
continue
;;
self)
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
dlself=yes
else
dlself=needless
@@ -5261,7 +6752,7 @@ func_mode_link ()
continue
;;
*)
- if test "$prev" = dlfiles; then
+ if test dlfiles = "$prev"; then
func_append dlfiles " $arg"
else
func_append dlprefiles " $arg"
@@ -5272,14 +6763,14 @@ func_mode_link ()
esac
;;
expsyms)
- export_symbols="$arg"
+ export_symbols=$arg
test -f "$arg" \
- || func_fatal_error "symbol file \`$arg' does not exist"
+ || func_fatal_error "symbol file '$arg' does not exist"
prev=
continue
;;
expsyms_regex)
- export_symbols_regex="$arg"
+ export_symbols_regex=$arg
prev=
continue
;;
@@ -5297,7 +6788,13 @@ func_mode_link ()
continue
;;
inst_prefix)
- inst_prefix_dir="$arg"
+ inst_prefix_dir=$arg
+ prev=
+ continue
+ ;;
+ mllvm)
+ # Clang does not use LLVM to link, so we can simply discard any
+ # '-mllvm $arg' options when doing the link step.
prev=
continue
;;
@@ -5321,21 +6818,21 @@ func_mode_link ()
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
- if test "$pic_object" != none; then
+ if test none != "$pic_object"; then
# Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
+ pic_object=$xdir$pic_object
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
func_append dlfiles " $pic_object"
prev=
continue
@@ -5346,7 +6843,7 @@ func_mode_link ()
fi
# CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
# Preload the old-style object.
func_append dlprefiles " $pic_object"
prev=
@@ -5354,23 +6851,23 @@ func_mode_link ()
# A PIC object.
func_append libobjs " $pic_object"
- arg="$pic_object"
+ arg=$pic_object
fi
# Non-PIC object.
- if test "$non_pic_object" != none; then
+ if test none != "$non_pic_object"; then
# Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
+ non_pic_object=$xdir$non_pic_object
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
+ non_pic_object=$pic_object
func_append non_pic_objects " $non_pic_object"
fi
else
@@ -5378,7 +6875,7 @@ func_mode_link ()
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
@@ -5386,24 +6883,29 @@ func_mode_link ()
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
- func_fatal_error "\`$arg' is not a valid libtool object"
+ func_fatal_error "'$arg' is not a valid libtool object"
fi
fi
done
else
- func_fatal_error "link input file \`$arg' does not exist"
+ func_fatal_error "link input file '$arg' does not exist"
fi
arg=$save_arg
prev=
continue
;;
+ os2dllname)
+ os2dllname=$arg
+ prev=
+ continue
+ ;;
precious_regex)
- precious_files_regex="$arg"
+ precious_files_regex=$arg
prev=
continue
;;
release)
- release="-$arg"
+ release=-$arg
prev=
continue
;;
@@ -5415,7 +6917,7 @@ func_mode_link ()
func_fatal_error "only absolute run-paths are allowed"
;;
esac
- if test "$prev" = rpath; then
+ if test rpath = "$prev"; then
case "$rpath " in
*" $arg "*) ;;
*) func_append rpath " $arg" ;;
@@ -5430,7 +6932,7 @@ func_mode_link ()
continue
;;
shrext)
- shrext_cmds="$arg"
+ shrext_cmds=$arg
prev=
continue
;;
@@ -5470,7 +6972,7 @@ func_mode_link ()
esac
fi # test -n "$prev"
- prevarg="$arg"
+ prevarg=$arg
case $arg in
-all-static)
@@ -5484,7 +6986,7 @@ func_mode_link ()
-allow-undefined)
# FIXME: remove this flag sometime in the future.
- func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+ func_fatal_error "'-allow-undefined' must not be used because it is the default"
;;
-avoid-version)
@@ -5516,7 +7018,7 @@ func_mode_link ()
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
func_fatal_error "more than one -exported-symbols argument is not allowed"
fi
- if test "X$arg" = "X-export-symbols"; then
+ if test X-export-symbols = "X$arg"; then
prev=expsyms
else
prev=expsyms_regex
@@ -5550,9 +7052,9 @@ func_mode_link ()
func_stripname "-L" '' "$arg"
if test -z "$func_stripname_result"; then
if test "$#" -gt 0; then
- func_fatal_error "require no space between \`-L' and \`$1'"
+ func_fatal_error "require no space between '-L' and '$1'"
else
- func_fatal_error "need path for \`-L' option"
+ func_fatal_error "need path for '-L' option"
fi
fi
func_resolve_sysroot "$func_stripname_result"
@@ -5563,8 +7065,8 @@ func_mode_link ()
*)
absdir=`cd "$dir" && pwd`
test -z "$absdir" && \
- func_fatal_error "cannot determine absolute directory name of \`$dir'"
- dir="$absdir"
+ func_fatal_error "cannot determine absolute directory name of '$dir'"
+ dir=$absdir
;;
esac
case "$deplibs " in
@@ -5599,7 +7101,7 @@ func_mode_link ()
;;
-l*)
- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ if test X-lc = "X$arg" || test X-lm = "X$arg"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
# These systems don't actually have a C or math library (as such)
@@ -5607,11 +7109,11 @@ func_mode_link ()
;;
*-*-os2*)
# These systems don't actually have a C library (as such)
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
# Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C and math libraries are in the System framework
@@ -5620,16 +7122,16 @@ func_mode_link ()
;;
*-*-sco3.2v5* | *-*-sco5v6*)
# Causes problems with __ctype
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
*-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
# Compiler inserts libc in the correct place for threads to work
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
esac
- elif test "X$arg" = "X-lc_r"; then
+ elif test X-lc_r = "X$arg"; then
case $host in
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
@@ -5639,6 +7141,11 @@ func_mode_link ()
continue
;;
+ -mllvm)
+ prev=mllvm
+ continue
+ ;;
+
-module)
module=yes
continue
@@ -5668,7 +7175,7 @@ func_mode_link ()
;;
-multi_module)
- single_module="${wl}-multi_module"
+ single_module=$wl-multi_module
continue
;;
@@ -5682,8 +7189,8 @@ func_mode_link ()
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
# The PATH hackery in wrapper scripts is required on Windows
# and Darwin in order for the loader to find any dlls it needs.
- func_warning "\`-no-install' is ignored for $host"
- func_warning "assuming \`-no-fast-install' instead"
+ func_warning "'-no-install' is ignored for $host"
+ func_warning "assuming '-no-fast-install' instead"
fast_install=no
;;
*) no_install=yes ;;
@@ -5701,6 +7208,11 @@ func_mode_link ()
continue
;;
+ -os2dllname)
+ prev=os2dllname
+ continue
+ ;;
+
-o) prev=output ;;
-precious-files-regex)
@@ -5788,14 +7300,14 @@ func_mode_link ()
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
arg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for flag in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_quote_for_eval "$flag"
func_append arg " $func_quote_for_eval_result"
func_append compiler_flags " $func_quote_for_eval_result"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
@@ -5804,15 +7316,15 @@ func_mode_link ()
func_stripname '-Wl,' '' "$arg"
args=$func_stripname_result
arg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for flag in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_quote_for_eval "$flag"
func_append arg " $wl$func_quote_for_eval_result"
func_append compiler_flags " $wl$func_quote_for_eval_result"
func_append linker_flags " $func_quote_for_eval_result"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
@@ -5835,7 +7347,7 @@ func_mode_link ()
# -msg_* for osf cc
-msg_*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
# Flags to be passed through unchanged, with rationale:
@@ -5847,25 +7359,52 @@ func_mode_link ()
# -m*, -t[45]*, -txscale* architecture-specific flags for GCC
# -F/path path to uninstalled frameworks, gcc on darwin
# -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # -fstack-protector* stack protector flags for GCC
# @file GCC response files
# -tp=* Portland pgcc target processor selection
# --sysroot=* for sysroot support
- # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ # -specs=* GCC specs files
+ # -stdlib=* select c++ std lib with clang
+ # -fsanitize=* Clang/GCC memory and address sanitizer
+ # -fuse-ld=* Linker select flags for GCC
+ # -static-* direct GCC to link specific libraries statically
+ # -fcilkplus Cilk Plus language extension features for C/C++
-64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
- -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+ -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*| \
+ -specs=*|-fsanitize=*|-fuse-ld=*|-static-*|-fcilkplus)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
func_append compile_command " $arg"
func_append finalize_command " $arg"
func_append compiler_flags " $arg"
continue
;;
+ -Z*)
+ if test os2 = "`expr $host : '.*\(os2\)'`"; then
+ # OS/2 uses -Zxxx to specify OS/2-specific options
+ compiler_flags="$compiler_flags $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case $arg in
+ -Zlinker | -Zstack)
+ prev=xcompiler
+ ;;
+ esac
+ continue
+ else
+ # Otherwise treat like 'Some other compiler flag' below
+ func_quote_for_eval "$arg"
+ arg=$func_quote_for_eval_result
+ fi
+ ;;
+
# Some other compiler flag.
-* | +*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
*.$objext)
@@ -5886,21 +7425,21 @@ func_mode_link ()
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
- if test "$pic_object" != none; then
+ test none = "$pic_object" || {
# Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
+ pic_object=$xdir$pic_object
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
func_append dlfiles " $pic_object"
prev=
continue
@@ -5911,7 +7450,7 @@ func_mode_link ()
fi
# CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
# Preload the old-style object.
func_append dlprefiles " $pic_object"
prev=
@@ -5919,23 +7458,23 @@ func_mode_link ()
# A PIC object.
func_append libobjs " $pic_object"
- arg="$pic_object"
- fi
+ arg=$pic_object
+ }
# Non-PIC object.
- if test "$non_pic_object" != none; then
+ if test none != "$non_pic_object"; then
# Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
+ non_pic_object=$xdir$non_pic_object
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
+ non_pic_object=$pic_object
func_append non_pic_objects " $non_pic_object"
fi
else
@@ -5943,7 +7482,7 @@ func_mode_link ()
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
@@ -5951,7 +7490,7 @@ func_mode_link ()
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
- func_fatal_error "\`$arg' is not a valid libtool object"
+ func_fatal_error "'$arg' is not a valid libtool object"
fi
fi
;;
@@ -5967,11 +7506,11 @@ func_mode_link ()
# A libtool-controlled library.
func_resolve_sysroot "$arg"
- if test "$prev" = dlfiles; then
+ if test dlfiles = "$prev"; then
# This library was specified with -dlopen.
func_append dlfiles " $func_resolve_sysroot_result"
prev=
- elif test "$prev" = dlprefiles; then
+ elif test dlprefiles = "$prev"; then
# The library was specified with -dlpreopen.
func_append dlprefiles " $func_resolve_sysroot_result"
prev=
@@ -5986,7 +7525,7 @@ func_mode_link ()
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
esac # arg
@@ -5998,9 +7537,9 @@ func_mode_link ()
done # argument parsing loop
test -n "$prev" && \
- func_fatal_help "the \`$prevarg' option requires an argument"
+ func_fatal_help "the '$prevarg' option requires an argument"
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
eval arg=\"$export_dynamic_flag_spec\"
func_append compile_command " $arg"
func_append finalize_command " $arg"
@@ -6009,20 +7548,23 @@ func_mode_link ()
oldlibs=
# calculate the name of the file, without its directory
func_basename "$output"
- outputname="$func_basename_result"
- libobjs_save="$libobjs"
+ outputname=$func_basename_result
+ libobjs_save=$libobjs
if test -n "$shlibpath_var"; then
# get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+ eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
else
shlib_search_path=
fi
eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+ # Definition is injected by LT_CONFIG during libtool generation.
+ func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
func_dirname "$output" "/" ""
- output_objdir="$func_dirname_result$objdir"
+ output_objdir=$func_dirname_result$objdir
func_to_tool_file "$output_objdir/"
tool_output_objdir=$func_to_tool_file_result
# Create the object directory.
@@ -6045,7 +7587,7 @@ func_mode_link ()
# Find all interdependent deplibs by searching for libraries
# that are linked more than once (e.g. -la -lb -la)
for deplib in $deplibs; do
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
@@ -6053,7 +7595,7 @@ func_mode_link ()
func_append libs " $deplib"
done
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
libs="$predeps $libs $compiler_lib_search_path $postdeps"
# Compute libraries that are listed more than once in $predeps
@@ -6085,7 +7627,7 @@ func_mode_link ()
case $file in
*.la) ;;
*)
- func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+ func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
;;
esac
done
@@ -6093,7 +7635,7 @@ func_mode_link ()
prog)
compile_deplibs=
finalize_deplibs=
- alldeplibs=no
+ alldeplibs=false
newdlfiles=
newdlprefiles=
passes="conv scan dlopen dlpreopen link"
@@ -6105,29 +7647,32 @@ func_mode_link ()
for pass in $passes; do
# The preopen pass in lib mode reverses $deplibs; put it back here
# so that -L comes before libs that need it for instance...
- if test "$linkmode,$pass" = "lib,link"; then
+ if test lib,link = "$linkmode,$pass"; then
## FIXME: Find the place where the list is rebuilt in the wrong
## order, and fix it there properly
tmp_deplibs=
for deplib in $deplibs; do
tmp_deplibs="$deplib $tmp_deplibs"
done
- deplibs="$tmp_deplibs"
+ deplibs=$tmp_deplibs
fi
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan"; then
- libs="$deplibs"
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass"; then
+ libs=$deplibs
deplibs=
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
case $pass in
- dlopen) libs="$dlfiles" ;;
- dlpreopen) libs="$dlprefiles" ;;
- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+ dlopen) libs=$dlfiles ;;
+ dlpreopen) libs=$dlprefiles ;;
+ link)
+ libs="$deplibs %DEPLIBS%"
+ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+ ;;
esac
fi
- if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ if test lib,dlpreopen = "$linkmode,$pass"; then
# Collect and forward deplibs of preopened libtool libs
for lib in $dlprefiles; do
# Ignore non-libtool-libs
@@ -6148,26 +7693,26 @@ func_mode_link ()
esac
done
done
- libs="$dlprefiles"
+ libs=$dlprefiles
fi
- if test "$pass" = dlopen; then
+ if test dlopen = "$pass"; then
# Collect dlpreopened libraries
- save_deplibs="$deplibs"
+ save_deplibs=$deplibs
deplibs=
fi
for deplib in $libs; do
lib=
- found=no
+ found=false
case $deplib in
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
|-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
func_append compiler_flags " $deplib"
- if test "$linkmode" = lib ; then
+ if test lib = "$linkmode"; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) func_append new_inherited_linker_flags " $deplib" ;;
@@ -6177,13 +7722,13 @@ func_mode_link ()
continue
;;
-l*)
- if test "$linkmode" != lib && test "$linkmode" != prog; then
- func_warning "\`-l' is ignored for archives/objects"
+ if test lib != "$linkmode" && test prog != "$linkmode"; then
+ func_warning "'-l' is ignored for archives/objects"
continue
fi
func_stripname '-l' '' "$deplib"
name=$func_stripname_result
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
else
searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
@@ -6191,31 +7736,22 @@ func_mode_link ()
for searchdir in $searchdirs; do
for search_ext in .la $std_shrext .so .a; do
# Search the libtool library
- lib="$searchdir/lib${name}${search_ext}"
+ lib=$searchdir/lib$name$search_ext
if test -f "$lib"; then
- if test "$search_ext" = ".la"; then
- found=yes
+ if test .la = "$search_ext"; then
+ found=:
else
- found=no
+ found=false
fi
break 2
fi
done
done
- if test "$found" != yes; then
- # deplib doesn't seem to be a libtool library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- else # deplib is a libtool library
+ if $found; then
+ # deplib is a libtool library
# If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
# We need to do some special things here, and not later.
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $deplib "*)
if func_lalib_p "$lib"; then
@@ -6223,19 +7759,19 @@ func_mode_link ()
old_library=
func_source "$lib"
for l in $old_library $library_names; do
- ll="$l"
+ ll=$l
done
- if test "X$ll" = "X$old_library" ; then # only static version available
- found=no
+ if test "X$ll" = "X$old_library"; then # only static version available
+ found=false
func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
+ ladir=$func_dirname_result
lib=$ladir/$old_library
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
fi
continue
fi
@@ -6244,15 +7780,25 @@ func_mode_link ()
*) ;;
esac
fi
+ else
+ # deplib doesn't seem to be a libtool library
+ if test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
fi
;; # -l
*.ltframework)
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
- if test "$linkmode" = lib ; then
+ if test lib = "$linkmode"; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) func_append new_inherited_linker_flags " $deplib" ;;
@@ -6265,18 +7811,18 @@ func_mode_link ()
case $linkmode in
lib)
deplibs="$deplib $deplibs"
- test "$pass" = conv && continue
+ test conv = "$pass" && continue
newdependency_libs="$deplib $newdependency_libs"
func_stripname '-L' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
prog)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
continue
fi
- if test "$pass" = scan; then
+ if test scan = "$pass"; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
@@ -6287,13 +7833,13 @@ func_mode_link ()
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
*)
- func_warning "\`-L' is ignored for archives/objects"
+ func_warning "'-L' is ignored for archives/objects"
;;
esac # linkmode
continue
;; # -L
-R*)
- if test "$pass" = link; then
+ if test link = "$pass"; then
func_stripname '-R' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
dir=$func_resolve_sysroot_result
@@ -6311,7 +7857,7 @@ func_mode_link ()
lib=$func_resolve_sysroot_result
;;
*.$libext)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
continue
fi
@@ -6322,21 +7868,26 @@ func_mode_link ()
case " $dlpreconveniencelibs " in
*" $deplib "*) ;;
*)
- valid_a_lib=no
+ valid_a_lib=false
case $deplibs_check_method in
match_pattern*)
set dummy $deplibs_check_method; shift
match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
| $EGREP "$match_pattern_regex" > /dev/null; then
- valid_a_lib=yes
+ valid_a_lib=:
fi
;;
pass_all)
- valid_a_lib=yes
+ valid_a_lib=:
;;
esac
- if test "$valid_a_lib" != yes; then
+ if $valid_a_lib; then
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ else
echo
$ECHO "*** Warning: Trying to link with static lib archive $deplib."
echo "*** I have the capability to make that library automatically link in when"
@@ -6344,18 +7895,13 @@ func_mode_link ()
echo "*** shared version of the library, which you do not appear to have"
echo "*** because the file extensions .$libext of this argument makes me believe"
echo "*** that it is just a static archive that I should not use here."
- else
- echo
- $ECHO "*** Warning: Linking the shared library $output against the"
- $ECHO "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
fi
;;
esac
continue
;;
prog)
- if test "$pass" != link; then
+ if test link != "$pass"; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
@@ -6366,10 +7912,10 @@ func_mode_link ()
esac # linkmode
;; # *.$libext
*.lo | *.$objext)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
- elif test "$linkmode" = prog; then
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ elif test prog = "$linkmode"; then
+ if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
func_append newdlprefiles " $deplib"
@@ -6382,22 +7928,20 @@ func_mode_link ()
continue
;;
%DEPLIBS%)
- alldeplibs=yes
+ alldeplibs=:
continue
;;
esac # case $deplib
- if test "$found" = yes || test -f "$lib"; then :
- else
- func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
- fi
+ $found || test -f "$lib" \
+ || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$lib" \
- || func_fatal_error "\`$lib' is not a valid libtool archive"
+ || func_fatal_error "'$lib' is not a valid libtool archive"
func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
+ ladir=$func_dirname_result
dlname=
dlopen=
@@ -6427,36 +7971,36 @@ func_mode_link ()
done
fi
dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass" ||
+ { test prog != "$linkmode" && test lib != "$linkmode"; }; then
test -n "$dlopen" && func_append dlfiles " $dlopen"
test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
fi
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
# Only check for convenience libraries
deplibs="$lib $deplibs"
if test -z "$libdir"; then
if test -z "$old_library"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
+ func_fatal_error "cannot find name of link library for '$lib'"
fi
# It is a libtool convenience library, so add in its objects.
func_append convenience " $ladir/$objdir/$old_library"
func_append old_convenience " $ladir/$objdir/$old_library"
- elif test "$linkmode" != prog && test "$linkmode" != lib; then
- func_fatal_error "\`$lib' is not a convenience library"
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ if $opt_preserve_dup_deps; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done
+ elif test prog != "$linkmode" && test lib != "$linkmode"; then
+ func_fatal_error "'$lib' is not a convenience library"
fi
- tmp_libs=
- for deplib in $dependency_libs; do
- deplibs="$deplib $deplibs"
- if $opt_preserve_dup_deps ; then
- case "$tmp_libs " in
- *" $deplib "*) func_append specialdeplibs " $deplib" ;;
- esac
- fi
- func_append tmp_libs " $deplib"
- done
continue
fi # $pass = conv
@@ -6464,26 +8008,26 @@ func_mode_link ()
# Get the name of the library we link against.
linklib=
if test -n "$old_library" &&
- { test "$prefer_static_libs" = yes ||
- test "$prefer_static_libs,$installed" = "built,no"; }; then
+ { test yes = "$prefer_static_libs" ||
+ test built,no = "$prefer_static_libs,$installed"; }; then
linklib=$old_library
else
for l in $old_library $library_names; do
- linklib="$l"
+ linklib=$l
done
fi
if test -z "$linklib"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
+ func_fatal_error "cannot find name of link library for '$lib'"
fi
# This library was specified with -dlopen.
- if test "$pass" = dlopen; then
- if test -z "$libdir"; then
- func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
- fi
+ if test dlopen = "$pass"; then
+ test -z "$libdir" \
+ && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
if test -z "$dlname" ||
- test "$dlopen_support" != yes ||
- test "$build_libtool_libs" = no; then
+ test yes != "$dlopen_support" ||
+ test no = "$build_libtool_libs"
+ then
# If there is no dlname, no dlopen support or we're linking
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
@@ -6497,40 +8041,40 @@ func_mode_link ()
# We need an absolute path.
case $ladir in
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
*)
abs_ladir=`cd "$ladir" && pwd`
if test -z "$abs_ladir"; then
- func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "cannot determine absolute directory name of '$ladir'"
func_warning "passing it literally to the linker, although it might fail"
- abs_ladir="$ladir"
+ abs_ladir=$ladir
fi
;;
esac
func_basename "$lib"
- laname="$func_basename_result"
+ laname=$func_basename_result
# Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
+ if test yes = "$installed"; then
if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- func_warning "library \`$lib' was moved."
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
+ func_warning "library '$lib' was moved."
+ dir=$ladir
+ absdir=$abs_ladir
+ libdir=$abs_ladir
else
- dir="$lt_sysroot$libdir"
- absdir="$lt_sysroot$libdir"
+ dir=$lt_sysroot$libdir
+ absdir=$lt_sysroot$libdir
fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ test yes = "$hardcode_automatic" && avoidtemprpath=yes
else
if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- dir="$ladir"
- absdir="$abs_ladir"
+ dir=$ladir
+ absdir=$abs_ladir
# Remove this search path later
func_append notinst_path " $abs_ladir"
else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
+ dir=$ladir/$objdir
+ absdir=$abs_ladir/$objdir
# Remove this search path later
func_append notinst_path " $abs_ladir"
fi
@@ -6539,11 +8083,11 @@ func_mode_link ()
name=$func_stripname_result
# This library was specified with -dlpreopen.
- if test "$pass" = dlpreopen; then
- if test -z "$libdir" && test "$linkmode" = prog; then
- func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ if test dlpreopen = "$pass"; then
+ if test -z "$libdir" && test prog = "$linkmode"; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
fi
- case "$host" in
+ case $host in
# special handling for platforms with PE-DLLs.
*cygwin* | *mingw* | *cegcc* )
# Linker will automatically link against shared library if both
@@ -6587,9 +8131,9 @@ func_mode_link ()
if test -z "$libdir"; then
# Link the convenience library
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
+ elif test prog,link = "$linkmode,$pass"; then
compile_deplibs="$dir/$old_library $compile_deplibs"
finalize_deplibs="$dir/$old_library $finalize_deplibs"
else
@@ -6599,14 +8143,14 @@ func_mode_link ()
fi
- if test "$linkmode" = prog && test "$pass" != link; then
+ if test prog = "$linkmode" && test link != "$pass"; then
func_append newlib_search_path " $ladir"
deplibs="$lib $deplibs"
- linkalldeplibs=no
- if test "$link_all_deplibs" != no || test -z "$library_names" ||
- test "$build_libtool_libs" = no; then
- linkalldeplibs=yes
+ linkalldeplibs=false
+ if test no != "$link_all_deplibs" || test -z "$library_names" ||
+ test no = "$build_libtool_libs"; then
+ linkalldeplibs=:
fi
tmp_libs=
@@ -6618,14 +8162,14 @@ func_mode_link ()
;;
esac
# Need to link against all dependency_libs?
- if test "$linkalldeplibs" = yes; then
+ if $linkalldeplibs; then
deplibs="$deplib $deplibs"
else
# Need to hardcode shared library paths
# or/and link against static libraries
newdependency_libs="$deplib $newdependency_libs"
fi
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
@@ -6635,15 +8179,15 @@ func_mode_link ()
continue
fi # $linkmode = prog...
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
if test -n "$library_names" &&
- { { test "$prefer_static_libs" = no ||
- test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ { { test no = "$prefer_static_libs" ||
+ test built,yes = "$prefer_static_libs,$installed"; } ||
test -z "$old_library"; }; then
# We need to hardcode the library path
- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
# Make sure the rpath contains only unique directories.
- case "$temp_rpath:" in
+ case $temp_rpath: in
*"$absdir:"*) ;;
*) func_append temp_rpath "$absdir:" ;;
esac
@@ -6672,9 +8216,9 @@ func_mode_link ()
esac
fi # $linkmode,$pass = prog,link...
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
+ if $alldeplibs &&
+ { test pass_all = "$deplibs_check_method" ||
+ { test yes = "$build_libtool_libs" &&
test -n "$library_names"; }; }; then
# We only need to search for static libraries
continue
@@ -6683,19 +8227,19 @@ func_mode_link ()
link_static=no # Whether the deplib will be linked statically
use_static_libs=$prefer_static_libs
- if test "$use_static_libs" = built && test "$installed" = yes; then
+ if test built = "$use_static_libs" && test yes = "$installed"; then
use_static_libs=no
fi
if test -n "$library_names" &&
- { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ { test no = "$use_static_libs" || test -z "$old_library"; }; then
case $host in
- *cygwin* | *mingw* | *cegcc*)
+ *cygwin* | *mingw* | *cegcc* | *os2*)
# No point in relinking DLLs because paths are not encoded
func_append notinst_deplibs " $lib"
need_relink=no
;;
*)
- if test "$installed" = no; then
+ if test no = "$installed"; then
func_append notinst_deplibs " $lib"
need_relink=yes
fi
@@ -6705,24 +8249,24 @@ func_mode_link ()
# Warn about portability, can't link against -module's on some
# systems (darwin). Don't bleat about dlopened modules though!
- dlopenmodule=""
+ dlopenmodule=
for dlpremoduletest in $dlprefiles; do
if test "X$dlpremoduletest" = "X$lib"; then
- dlopenmodule="$dlpremoduletest"
+ dlopenmodule=$dlpremoduletest
break
fi
done
- if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
echo
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
$ECHO "*** Warning: Linking the executable $output against the loadable module"
else
$ECHO "*** Warning: Linking the shared library $output against the loadable module"
fi
$ECHO "*** $linklib is not portable!"
fi
- if test "$linkmode" = lib &&
- test "$hardcode_into_libs" = yes; then
+ if test lib = "$linkmode" &&
+ test yes = "$hardcode_into_libs"; then
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
@@ -6750,43 +8294,43 @@ func_mode_link ()
# figure out the soname
set dummy $library_names
shift
- realname="$1"
+ realname=$1
shift
libname=`eval "\\$ECHO \"$libname_spec\""`
# use dlname if we got it. it's perfectly good, no?
if test -n "$dlname"; then
- soname="$dlname"
+ soname=$dlname
elif test -n "$soname_spec"; then
# bleh windows
case $host in
- *cygwin* | mingw* | *cegcc*)
+ *cygwin* | mingw* | *cegcc* | *os2*)
func_arith $current - $age
major=$func_arith_result
- versuffix="-$major"
+ versuffix=-$major
;;
esac
eval soname=\"$soname_spec\"
else
- soname="$realname"
+ soname=$realname
fi
# Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
+ soroot=$soname
func_basename "$soroot"
- soname="$func_basename_result"
+ soname=$func_basename_result
func_stripname 'lib' '.dll' "$soname"
newlib=libimp-$func_stripname_result.a
# If the library has no export list, then create one now
if test -f "$output_objdir/$soname-def"; then :
else
- func_verbose "extracting exported symbol list from \`$soname'"
+ func_verbose "extracting exported symbol list from '$soname'"
func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
fi
# Create $newlib
if test -f "$output_objdir/$newlib"; then :; else
- func_verbose "generating import library for \`$soname'"
+ func_verbose "generating import library for '$soname'"
func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
fi
# make sure the library variables are pointing to the new library
@@ -6794,58 +8338,58 @@ func_mode_link ()
linklib=$newlib
fi # test -n "$old_archive_from_expsyms_cmds"
- if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ if test prog = "$linkmode" || test relink != "$opt_mode"; then
add_shlibpath=
add_dir=
add=
lib_linked=yes
case $hardcode_action in
immediate | unsupported)
- if test "$hardcode_direct" = no; then
- add="$dir/$linklib"
+ if test no = "$hardcode_direct"; then
+ add=$dir/$linklib
case $host in
- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
- *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
+ *-*-sysv4*uw2*) add_dir=-L$dir ;;
*-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
- *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-unixware7*) add_dir=-L$dir ;;
*-*-darwin* )
- # if the lib is a (non-dlopened) module then we can not
+ # if the lib is a (non-dlopened) module then we cannot
# link against it, someone is ignoring the earlier warnings
if /usr/bin/file -L $add 2> /dev/null |
- $GREP ": [^:]* bundle" >/dev/null ; then
+ $GREP ": [^:]* bundle" >/dev/null; then
if test "X$dlopenmodule" != "X$lib"; then
$ECHO "*** Warning: lib $linklib is a module, not a shared library"
- if test -z "$old_library" ; then
+ if test -z "$old_library"; then
echo
echo "*** And there doesn't seem to be a static archive available"
echo "*** The link will probably fail, sorry"
else
- add="$dir/$old_library"
+ add=$dir/$old_library
fi
elif test -n "$old_library"; then
- add="$dir/$old_library"
+ add=$dir/$old_library
fi
fi
esac
- elif test "$hardcode_minus_L" = no; then
+ elif test no = "$hardcode_minus_L"; then
case $host in
- *-*-sunos*) add_shlibpath="$dir" ;;
+ *-*-sunos*) add_shlibpath=$dir ;;
esac
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- add_shlibpath="$dir"
- add="-l$name"
+ add_dir=-L$dir
+ add=-l$name
+ elif test no = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
else
lib_linked=no
fi
;;
relink)
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$absdir"
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$dir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$absdir
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
@@ -6854,10 +8398,10 @@ func_mode_link ()
;;
esac
fi
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
- add="-l$name"
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
else
lib_linked=no
fi
@@ -6865,7 +8409,7 @@ func_mode_link ()
*) lib_linked=no ;;
esac
- if test "$lib_linked" != yes; then
+ if test yes != "$lib_linked"; then
func_fatal_configuration "unsupported hardcode properties"
fi
@@ -6875,15 +8419,15 @@ func_mode_link ()
*) func_append compile_shlibpath "$add_shlibpath:" ;;
esac
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
test -n "$add" && compile_deplibs="$add $compile_deplibs"
else
test -n "$add_dir" && deplibs="$add_dir $deplibs"
test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes &&
- test "$hardcode_minus_L" != yes &&
- test "$hardcode_shlibpath_var" = yes; then
+ if test yes != "$hardcode_direct" &&
+ test yes != "$hardcode_minus_L" &&
+ test yes = "$hardcode_shlibpath_var"; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) func_append finalize_shlibpath "$libdir:" ;;
@@ -6892,33 +8436,33 @@ func_mode_link ()
fi
fi
- if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ if test prog = "$linkmode" || test relink = "$opt_mode"; then
add_shlibpath=
add_dir=
add=
# Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$libdir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$libdir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$libdir
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) func_append finalize_shlibpath "$libdir:" ;;
esac
- add="-l$name"
- elif test "$hardcode_automatic" = yes; then
+ add=-l$name
+ elif test yes = "$hardcode_automatic"; then
if test -n "$inst_prefix_dir" &&
- test -f "$inst_prefix_dir$libdir/$linklib" ; then
- add="$inst_prefix_dir$libdir/$linklib"
+ test -f "$inst_prefix_dir$libdir/$linklib"; then
+ add=$inst_prefix_dir$libdir/$linklib
else
- add="$libdir/$linklib"
+ add=$libdir/$linklib
fi
else
# We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
+ add_dir=-L$libdir
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
@@ -6927,10 +8471,10 @@ func_mode_link ()
;;
esac
fi
- add="-l$name"
+ add=-l$name
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
else
@@ -6938,43 +8482,43 @@ func_mode_link ()
test -n "$add" && deplibs="$add $deplibs"
fi
fi
- elif test "$linkmode" = prog; then
+ elif test prog = "$linkmode"; then
# Here we assume that one of hardcode_direct or hardcode_minus_L
# is not unsupported. This is valid on all known static and
# shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
+ if test unsupported != "$hardcode_direct"; then
+ test -n "$old_library" && linklib=$old_library
compile_deplibs="$dir/$linklib $compile_deplibs"
finalize_deplibs="$dir/$linklib $finalize_deplibs"
else
compile_deplibs="-l$name -L$dir $compile_deplibs"
finalize_deplibs="-l$name -L$dir $finalize_deplibs"
fi
- elif test "$build_libtool_libs" = yes; then
+ elif test yes = "$build_libtool_libs"; then
# Not a shared library
- if test "$deplibs_check_method" != pass_all; then
+ if test pass_all != "$deplibs_check_method"; then
# We're trying link a shared library against a static one
# but the system doesn't support it.
# Just print a warning and add the library to dependency_libs so
# that the program can be linked against the static library.
echo
- $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ $ECHO "*** Warning: This system cannot link to static lib archive $lib."
echo "*** I have the capability to make that library automatically link in when"
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have."
- if test "$module" = yes; then
+ if test yes = "$module"; then
echo "*** But as you try to build a module library, libtool will still create "
echo "*** a static module, that should work as long as the dlopening application"
echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
if test -z "$global_symbol_pipe"; then
echo
echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
fi
- if test "$build_old_libs" = no; then
+ if test no = "$build_old_libs"; then
build_libtool_libs=module
build_old_libs=yes
else
@@ -6987,11 +8531,11 @@ func_mode_link ()
fi
fi # link shared/static library?
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes ||
- test "$build_old_libs" = yes ||
- test "$link_static" = yes; }; then
+ { test yes != "$hardcode_into_libs" ||
+ test yes = "$build_old_libs" ||
+ test yes = "$link_static"; }; then
# Extract -R from dependency_libs
temp_deplibs=
for libdir in $dependency_libs; do
@@ -7005,12 +8549,12 @@ func_mode_link ()
*) func_append temp_deplibs " $libdir";;
esac
done
- dependency_libs="$temp_deplibs"
+ dependency_libs=$temp_deplibs
fi
func_append newlib_search_path " $absdir"
# Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
# ... and its dependency_libs
tmp_libs=
for deplib in $dependency_libs; do
@@ -7020,7 +8564,7 @@ func_mode_link ()
func_resolve_sysroot "$func_stripname_result";;
*) func_resolve_sysroot "$deplib" ;;
esac
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $func_resolve_sysroot_result "*)
func_append specialdeplibs " $func_resolve_sysroot_result" ;;
@@ -7029,12 +8573,12 @@ func_mode_link ()
func_append tmp_libs " $func_resolve_sysroot_result"
done
- if test "$link_all_deplibs" != no; then
+ if test no != "$link_all_deplibs"; then
# Add the search paths of all dependency libraries
for deplib in $dependency_libs; do
path=
case $deplib in
- -L*) path="$deplib" ;;
+ -L*) path=$deplib ;;
*.la)
func_resolve_sysroot "$deplib"
deplib=$func_resolve_sysroot_result
@@ -7042,12 +8586,12 @@ func_mode_link ()
dir=$func_dirname_result
# We need an absolute path.
case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
*)
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
- func_warning "cannot determine absolute directory name of \`$dir'"
- absdir="$dir"
+ func_warning "cannot determine absolute directory name of '$dir'"
+ absdir=$dir
fi
;;
esac
@@ -7055,35 +8599,35 @@ func_mode_link ()
case $host in
*-*-darwin*)
depdepl=
- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
- if test -n "$deplibrary_names" ; then
- for tmp in $deplibrary_names ; do
+ eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names"; then
+ for tmp in $deplibrary_names; do
depdepl=$tmp
done
- if test -f "$absdir/$objdir/$depdepl" ; then
- depdepl="$absdir/$objdir/$depdepl"
- darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -f "$absdir/$objdir/$depdepl"; then
+ depdepl=$absdir/$objdir/$depdepl
+ darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
if test -z "$darwin_install_name"; then
- darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
fi
- func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
- func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
+ func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
path=
fi
fi
;;
*)
- path="-L$absdir/$objdir"
+ path=-L$absdir/$objdir
;;
esac
else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_fatal_error "'$deplib' is not a valid libtool archive"
test "$absdir" != "$libdir" && \
- func_warning "\`$deplib' seems to be moved"
+ func_warning "'$deplib' seems to be moved"
- path="-L$absdir"
+ path=-L$absdir
fi
;;
esac
@@ -7095,23 +8639,23 @@ func_mode_link ()
fi # link_all_deplibs != no
fi # linkmode = lib
done # for deplib in $libs
- if test "$pass" = link; then
- if test "$linkmode" = "prog"; then
+ if test link = "$pass"; then
+ if test prog = "$linkmode"; then
compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
else
compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
fi
fi
- dependency_libs="$newdependency_libs"
- if test "$pass" = dlpreopen; then
+ dependency_libs=$newdependency_libs
+ if test dlpreopen = "$pass"; then
# Link the dlpreopened libraries before other libraries
for deplib in $save_deplibs; do
deplibs="$deplib $deplibs"
done
fi
- if test "$pass" != dlopen; then
- if test "$pass" != conv; then
+ if test dlopen != "$pass"; then
+ test conv = "$pass" || {
# Make sure lib_search_path contains only unique directories.
lib_search_path=
for dir in $newlib_search_path; do
@@ -7121,12 +8665,12 @@ func_mode_link ()
esac
done
newlib_search_path=
- fi
+ }
- if test "$linkmode,$pass" != "prog,link"; then
- vars="deplibs"
- else
+ if test prog,link = "$linkmode,$pass"; then
vars="compile_deplibs finalize_deplibs"
+ else
+ vars=deplibs
fi
for var in $vars dependency_libs; do
# Add libraries to $var in reverse order
@@ -7184,62 +8728,93 @@ func_mode_link ()
eval $var=\"$tmp_libs\"
done # for var
fi
+
+ # Add Sun CC postdeps if required:
+ test CXX = "$tagname" && {
+ case $host_os in
+ linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C++ 5.9
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ func_cc_basename "$CC"
+ case $func_cc_basename_result in
+ CC* | sunCC*)
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ }
+
# Last step: remove runtime libs from dependency_libs
# (they stay in deplibs)
tmp_libs=
- for i in $dependency_libs ; do
+ for i in $dependency_libs; do
case " $predeps $postdeps $compiler_lib_search_path " in
*" $i "*)
- i=""
+ i=
;;
esac
- if test -n "$i" ; then
+ if test -n "$i"; then
func_append tmp_libs " $i"
fi
done
dependency_libs=$tmp_libs
done # for pass
- if test "$linkmode" = prog; then
- dlfiles="$newdlfiles"
+ if test prog = "$linkmode"; then
+ dlfiles=$newdlfiles
fi
- if test "$linkmode" = prog || test "$linkmode" = lib; then
- dlprefiles="$newdlprefiles"
+ if test prog = "$linkmode" || test lib = "$linkmode"; then
+ dlprefiles=$newdlprefiles
fi
case $linkmode in
oldlib)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for archives"
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for archives"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ func_warning "'-l' and '-L' are ignored for archives" ;;
esac
test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for archives"
+ func_warning "'-rpath' is ignored for archives"
test -n "$xrpath" && \
- func_warning "\`-R' is ignored for archives"
+ func_warning "'-R' is ignored for archives"
test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for archives"
+ func_warning "'-version-info/-version-number' is ignored for archives"
test -n "$release" && \
- func_warning "\`-release' is ignored for archives"
+ func_warning "'-release' is ignored for archives"
test -n "$export_symbols$export_symbols_regex" && \
- func_warning "\`-export-symbols' is ignored for archives"
+ func_warning "'-export-symbols' is ignored for archives"
# Now set the variables for building old libraries.
build_libtool_libs=no
- oldlibs="$output"
+ oldlibs=$output
func_append objs "$old_deplibs"
;;
lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
+ # Make sure we only generate libraries of the form 'libNAME.la'.
case $outputname in
lib*)
func_stripname 'lib' '.la' "$outputname"
@@ -7248,10 +8823,10 @@ func_mode_link ()
eval libname=\"$libname_spec\"
;;
*)
- test "$module" = no && \
- func_fatal_help "libtool library \`$output' must begin with \`lib'"
+ test no = "$module" \
+ && func_fatal_help "libtool library '$output' must begin with 'lib'"
- if test "$need_lib_prefix" != no; then
+ if test no != "$need_lib_prefix"; then
# Add the "lib" prefix for modules if required
func_stripname '' '.la' "$outputname"
name=$func_stripname_result
@@ -7265,8 +8840,8 @@ func_mode_link ()
esac
if test -n "$objs"; then
- if test "$deplibs_check_method" != pass_all; then
- func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ if test pass_all != "$deplibs_check_method"; then
+ func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
else
echo
$ECHO "*** Warning: Linking the shared library $output against the non-libtool"
@@ -7275,21 +8850,21 @@ func_mode_link ()
fi
fi
- test "$dlself" != no && \
- func_warning "\`-dlopen self' is ignored for libtool libraries"
+ test no = "$dlself" \
+ || func_warning "'-dlopen self' is ignored for libtool libraries"
set dummy $rpath
shift
- test "$#" -gt 1 && \
- func_warning "ignoring multiple \`-rpath's for a libtool library"
+ test 1 -lt "$#" \
+ && func_warning "ignoring multiple '-rpath's for a libtool library"
- install_libdir="$1"
+ install_libdir=$1
oldlibs=
if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
# Building a libtool convenience library.
- # Some compilers have problems with a `.al' extension so
+ # Some compilers have problems with a '.al' extension so
# convenience libraries should have the same extension an
# archive normally would.
oldlibs="$output_objdir/$libname.$libext $oldlibs"
@@ -7298,20 +8873,20 @@ func_mode_link ()
fi
test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+ func_warning "'-version-info/-version-number' is ignored for convenience libraries"
test -n "$release" && \
- func_warning "\`-release' is ignored for convenience libraries"
+ func_warning "'-release' is ignored for convenience libraries"
else
# Parse the version information argument.
- save_ifs="$IFS"; IFS=':'
+ save_ifs=$IFS; IFS=:
set dummy $vinfo 0 0 0
shift
- IFS="$save_ifs"
+ IFS=$save_ifs
test -n "$7" && \
- func_fatal_help "too many parameters to \`-version-info'"
+ func_fatal_help "too many parameters to '-version-info'"
# convert absolute version numbers to libtool ages
# this retains compatibility with .la files and attempts
@@ -7319,42 +8894,45 @@ func_mode_link ()
case $vinfo_number in
yes)
- number_major="$1"
- number_minor="$2"
- number_revision="$3"
+ number_major=$1
+ number_minor=$2
+ number_revision=$3
#
# There are really only two kinds -- those that
# use the current revision as the major version
# and those that subtract age and use age as
# a minor version. But, then there is irix
- # which has an extra 1 added just for fun
+ # that has an extra 1 added just for fun
#
case $version_type in
# correct linux to gnu/linux during the next big refactor
- darwin|linux|osf|windows|none)
+ darwin|freebsd-elf|linux|osf|windows|none)
func_arith $number_major + $number_minor
current=$func_arith_result
- age="$number_minor"
- revision="$number_revision"
+ age=$number_minor
+ revision=$number_revision
;;
- freebsd-aout|freebsd-elf|qnx|sunos)
- current="$number_major"
- revision="$number_minor"
- age="0"
+ freebsd-aout|qnx|sunos)
+ current=$number_major
+ revision=$number_minor
+ age=0
;;
irix|nonstopux)
func_arith $number_major + $number_minor
current=$func_arith_result
- age="$number_minor"
- revision="$number_minor"
+ age=$number_minor
+ revision=$number_minor
lt_irix_increment=no
;;
+ *)
+ func_fatal_configuration "$modename: unknown library version type '$version_type'"
+ ;;
esac
;;
no)
- current="$1"
- revision="$2"
- age="$3"
+ current=$1
+ revision=$2
+ age=$3
;;
esac
@@ -7362,30 +8940,30 @@ func_mode_link ()
case $current in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "CURRENT \`$current' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "CURRENT '$current' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
case $revision in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "REVISION \`$revision' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "REVISION '$revision' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
case $age in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "AGE \`$age' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "AGE '$age' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
if test "$age" -gt "$current"; then
- func_error "AGE \`$age' is greater than the current interface number \`$current'"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "AGE '$age' is greater than the current interface number '$current'"
+ func_fatal_error "'$vinfo' is not valid version information"
fi
# Calculate the version variables.
@@ -7400,26 +8978,36 @@ func_mode_link ()
# verstring for coding it into the library header
func_arith $current - $age
major=.$func_arith_result
- versuffix="$major.$age.$revision"
+ versuffix=$major.$age.$revision
# Darwin ld doesn't like 0 for these options...
func_arith $current + 1
minor_current=$func_arith_result
- xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ # On Darwin other compilers
+ case $CC in
+ nagfor*)
+ verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+ ;;
+ *)
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+ esac
;;
freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
+ major=.$current
+ versuffix=.$current.$revision
;;
freebsd-elf)
- major=".$current"
- versuffix=".$current"
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=$major.$age.$revision
;;
irix | nonstopux)
- if test "X$lt_irix_increment" = "Xno"; then
+ if test no = "$lt_irix_increment"; then
func_arith $current - $age
else
func_arith $current - $age + 1
@@ -7430,69 +9018,74 @@ func_mode_link ()
nonstopux) verstring_prefix=nonstopux ;;
*) verstring_prefix=sgi ;;
esac
- verstring="$verstring_prefix$major.$revision"
+ verstring=$verstring_prefix$major.$revision
# Add in all the interfaces that we are compatible with.
loop=$revision
- while test "$loop" -ne 0; do
+ while test 0 -ne "$loop"; do
func_arith $revision - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
- verstring="$verstring_prefix$major.$iface:$verstring"
+ verstring=$verstring_prefix$major.$iface:$verstring
done
- # Before this point, $major must not contain `.'.
+ # Before this point, $major must not contain '.'.
major=.$major
- versuffix="$major.$revision"
+ versuffix=$major.$revision
;;
linux) # correct to gnu/linux during the next big refactor
func_arith $current - $age
major=.$func_arith_result
- versuffix="$major.$age.$revision"
+ versuffix=$major.$age.$revision
;;
osf)
func_arith $current - $age
major=.$func_arith_result
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
+ versuffix=.$current.$age.$revision
+ verstring=$current.$age.$revision
# Add in all the interfaces that we are compatible with.
loop=$age
- while test "$loop" -ne 0; do
+ while test 0 -ne "$loop"; do
func_arith $current - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
- verstring="$verstring:${iface}.0"
+ verstring=$verstring:$iface.0
done
# Make executables depend on our current version.
- func_append verstring ":${current}.0"
+ func_append verstring ":$current.0"
;;
qnx)
- major=".$current"
- versuffix=".$current"
+ major=.$current
+ versuffix=.$current
+ ;;
+
+ sco)
+ major=.$current
+ versuffix=.$current
;;
sunos)
- major=".$current"
- versuffix=".$current.$revision"
+ major=.$current
+ versuffix=.$current.$revision
;;
windows)
# Use '-' rather than '.', since we only want one
- # extension on DOS 8.3 filesystems.
+ # extension on DOS 8.3 file systems.
func_arith $current - $age
major=$func_arith_result
- versuffix="-$major"
+ versuffix=-$major
;;
*)
- func_fatal_configuration "unknown library version type \`$version_type'"
+ func_fatal_configuration "unknown library version type '$version_type'"
;;
esac
@@ -7506,42 +9099,45 @@ func_mode_link ()
verstring=
;;
*)
- verstring="0.0"
+ verstring=0.0
;;
esac
- if test "$need_version" = no; then
+ if test no = "$need_version"; then
versuffix=
else
- versuffix=".0.0"
+ versuffix=.0.0
fi
fi
# Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
+ if test yes,no = "$avoid_version,$need_version"; then
major=
versuffix=
- verstring=""
+ verstring=
fi
# Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- func_warning "undefined symbols not allowed in $host shared libraries"
- build_libtool_libs=no
- build_old_libs=yes
+ if test yes = "$allow_undefined"; then
+ if test unsupported = "$allow_undefined_flag"; then
+ if test yes = "$build_old_libs"; then
+ func_warning "undefined symbols not allowed in $host shared libraries; building static only"
+ build_libtool_libs=no
+ else
+ func_fatal_error "can't build $host shared library unless -no-undefined is specified"
+ fi
fi
else
# Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
+ allow_undefined_flag=$no_undefined_flag
fi
fi
- func_generate_dlsyms "$libname" "$libname" "yes"
+ func_generate_dlsyms "$libname" "$libname" :
func_append libobjs " $symfileobj"
- test "X$libobjs" = "X " && libobjs=
+ test " " = "$libobjs" && libobjs=
- if test "$opt_mode" != relink; then
+ if test relink != "$opt_mode"; then
# Remove our outputs, but don't remove object files since they
# may have been created when compiling PIC objects.
removelist=
@@ -7550,8 +9146,8 @@ func_mode_link ()
case $p in
*.$objext | *.gcno)
;;
- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
- if test "X$precious_files_regex" != "X"; then
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
+ if test -n "$precious_files_regex"; then
if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
then
continue
@@ -7567,11 +9163,11 @@ func_mode_link ()
fi
# Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
func_append oldlibs " $output_objdir/$libname.$libext"
# Transform .lo files to .o files.
- oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
fi
# Eliminate all temporary directories.
@@ -7592,13 +9188,13 @@ func_mode_link ()
*) func_append finalize_rpath " $libdir" ;;
esac
done
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
dependency_libs="$temp_xrpath $dependency_libs"
fi
fi
# Make sure dlfiles contains only unique files that won't be dlpreopened
- old_dlfiles="$dlfiles"
+ old_dlfiles=$dlfiles
dlfiles=
for lib in $old_dlfiles; do
case " $dlprefiles $dlfiles " in
@@ -7608,7 +9204,7 @@ func_mode_link ()
done
# Make sure dlprefiles contains only unique files
- old_dlprefiles="$dlprefiles"
+ old_dlprefiles=$dlprefiles
dlprefiles=
for lib in $old_dlprefiles; do
case "$dlprefiles " in
@@ -7617,7 +9213,7 @@ func_mode_link ()
esac
done
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
if test -n "$rpath"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
@@ -7641,7 +9237,7 @@ func_mode_link ()
;;
*)
# Add libc to deplibs on all other systems if necessary.
- if test "$build_libtool_need_lc" = "yes"; then
+ if test yes = "$build_libtool_need_lc"; then
func_append deplibs " -lc"
fi
;;
@@ -7657,9 +9253,9 @@ func_mode_link ()
# I'm not sure if I'm treating the release correctly. I think
# release should show up in the -l (ie -lgmp5) so we don't want to
# add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
+ release=
+ versuffix=
+ major=
newdeplibs=
droppeddeps=no
case $deplibs_check_method in
@@ -7688,20 +9284,20 @@ EOF
-l*)
func_stripname -l '' "$i"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $i "*)
func_append newdeplibs " $i"
- i=""
+ i=
;;
esac
fi
- if test -n "$i" ; then
+ if test -n "$i"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
set dummy $deplib_matches; shift
deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
func_append newdeplibs " $i"
else
droppeddeps=yes
@@ -7731,20 +9327,20 @@ EOF
$opt_dry_run || $RM conftest
if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
ldd_output=`ldd conftest`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $i "*)
func_append newdeplibs " $i"
- i=""
+ i=
;;
esac
fi
- if test -n "$i" ; then
+ if test -n "$i"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
set dummy $deplib_matches; shift
deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
func_append newdeplibs " $i"
else
droppeddeps=yes
@@ -7781,24 +9377,24 @@ EOF
-l*)
func_stripname -l '' "$a_deplib"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $a_deplib "*)
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
;;
esac
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
if test -n "$file_magic_glob"; then
libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
else
libnameglob=$libname
fi
- test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+ test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- if test "$want_nocaseglob" = yes; then
+ if test yes = "$want_nocaseglob"; then
shopt -s nocaseglob
potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
$nocaseglob
@@ -7816,25 +9412,25 @@ EOF
# We might still enter an endless loop, since a link
# loop can be closed while we follow links,
# but so what?
- potlib="$potent_lib"
+ potlib=$potent_lib
while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
+ *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
esac
done
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
$SED -e 10q |
$EGREP "$file_magic_regex" > /dev/null; then
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
break 2
fi
done
done
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
droppeddeps=yes
echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
@@ -7842,7 +9438,7 @@ EOF
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
+ if test -z "$potlib"; then
$ECHO "*** with $libname but no candidates were found. (...for file magic test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
@@ -7865,30 +9461,30 @@ EOF
-l*)
func_stripname -l '' "$a_deplib"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $a_deplib "*)
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
;;
esac
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
- potlib="$potent_lib" # see symlink-check above in file_magic test
+ potlib=$potent_lib # see symlink-check above in file_magic test
if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
$EGREP "$match_pattern_regex" > /dev/null; then
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
break 2
fi
done
done
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
droppeddeps=yes
echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
@@ -7896,7 +9492,7 @@ EOF
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
+ if test -z "$potlib"; then
$ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
@@ -7912,18 +9508,18 @@ EOF
done # Gone through all deplibs.
;;
none | unknown | *)
- newdeplibs=""
+ newdeplibs=
tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- for i in $predeps $postdeps ; do
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ for i in $predeps $postdeps; do
# can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
done
fi
case $tmp_deplibs in
*[!\ \ ]*)
echo
- if test "X$deplibs_check_method" = "Xnone"; then
+ if test none = "$deplibs_check_method"; then
echo "*** Warning: inter-library dependencies are not supported in this platform."
else
echo "*** Warning: inter-library dependencies are not known to be supported."
@@ -7947,8 +9543,8 @@ EOF
;;
esac
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
+ if test yes = "$droppeddeps"; then
+ if test yes = "$module"; then
echo
echo "*** Warning: libtool could not satisfy all declared inter-library"
$ECHO "*** dependencies of module $libname. Therefore, libtool will create"
@@ -7957,12 +9553,12 @@ EOF
if test -z "$global_symbol_pipe"; then
echo
echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
build_libtool_libs=module
build_old_libs=yes
else
@@ -7973,14 +9569,14 @@ EOF
echo "*** automatically added whenever a program is linked with this library"
echo "*** or is declared to -dlopen it."
- if test "$allow_undefined" = no; then
+ if test no = "$allow_undefined"; then
echo
echo "*** Since this library must not contain undefined symbols,"
echo "*** because either the platform does not support them or"
echo "*** it was explicitly requested with -no-undefined,"
echo "*** libtool will only create a static version of it."
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
build_libtool_libs=module
build_old_libs=yes
else
@@ -8026,7 +9622,7 @@ EOF
*) func_append new_libs " $deplib" ;;
esac
done
- deplibs="$new_libs"
+ deplibs=$new_libs
# All the library-specific variables (install_libdir is set above).
library_names=
@@ -8034,25 +9630,25 @@ EOF
dlname=
# Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- # Remove ${wl} instances when linking with ld.
+ if test yes = "$build_libtool_libs"; then
+ # Remove $wl instances when linking with ld.
# FIXME: should test the right _cmds variable.
case $archive_cmds in
*\$LD\ *) wl= ;;
esac
- if test "$hardcode_into_libs" = yes; then
+ if test yes = "$hardcode_into_libs"; then
# Hardcode the library paths
hardcode_libdirs=
dep_rpath=
- rpath="$finalize_rpath"
- test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ rpath=$finalize_rpath
+ test relink = "$opt_mode" || rpath=$compile_rpath$rpath
for libdir in $rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
func_replace_sysroot "$libdir"
libdir=$func_replace_sysroot_result
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8077,7 +9673,7 @@ EOF
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
fi
if test -n "$runpath_var" && test -n "$perm_rpath"; then
@@ -8091,8 +9687,8 @@ EOF
test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
fi
- shlibpath="$finalize_shlibpath"
- test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ shlibpath=$finalize_shlibpath
+ test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
if test -n "$shlibpath"; then
eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
fi
@@ -8102,19 +9698,19 @@ EOF
eval library_names=\"$library_names_spec\"
set dummy $library_names
shift
- realname="$1"
+ realname=$1
shift
if test -n "$soname_spec"; then
eval soname=\"$soname_spec\"
else
- soname="$realname"
+ soname=$realname
fi
if test -z "$dlname"; then
dlname=$soname
fi
- lib="$output_objdir/$realname"
+ lib=$output_objdir/$realname
linknames=
for link
do
@@ -8128,7 +9724,7 @@ EOF
delfiles=
if test -n "$export_symbols" && test -n "$include_expsyms"; then
$opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
- export_symbols="$output_objdir/$libname.uexp"
+ export_symbols=$output_objdir/$libname.uexp
func_append delfiles " $export_symbols"
fi
@@ -8137,31 +9733,31 @@ EOF
cygwin* | mingw* | cegcc*)
if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
# exporting using user supplied symfile
- if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ func_dll_def_p "$export_symbols" || {
# and it's NOT already a .def file. Must figure out
# which of the given symbols are data symbols and tag
# them as such. So, trigger use of export_symbols_cmds.
# export_symbols gets reassigned inside the "prepare
# the list of exported symbols" if statement, so the
# include_expsyms logic still works.
- orig_export_symbols="$export_symbols"
+ orig_export_symbols=$export_symbols
export_symbols=
always_export_symbols=yes
- fi
+ }
fi
;;
esac
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
+ if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
$opt_dry_run || $RM $export_symbols
cmds=$export_symbols_cmds
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd1 in $cmds; do
- IFS="$save_ifs"
+ IFS=$save_ifs
# Take the normal branch if the nm_file_list_spec branch
# doesn't work or if tool conversion is not needed.
case $nm_file_list_spec~$to_tool_file_cmd in
@@ -8175,7 +9771,7 @@ EOF
try_normal_branch=no
;;
esac
- if test "$try_normal_branch" = yes \
+ if test yes = "$try_normal_branch" \
&& { test "$len" -lt "$max_cmd_len" \
|| test "$max_cmd_len" -le -1; }
then
@@ -8186,7 +9782,7 @@ EOF
output_la=$func_basename_result
save_libobjs=$libobjs
save_output=$output
- output=${output_objdir}/${output_la}.nm
+ output=$output_objdir/$output_la.nm
func_to_tool_file "$output"
libobjs=$nm_file_list_spec$func_to_tool_file_result
func_append delfiles " $output"
@@ -8209,8 +9805,8 @@ EOF
break
fi
done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ IFS=$save_ifs
+ if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
fi
@@ -8218,16 +9814,16 @@ EOF
fi
if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
$opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
- if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
+ # 's' commands, which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
@@ -8246,11 +9842,11 @@ EOF
;;
esac
done
- deplibs="$tmp_deplibs"
+ deplibs=$tmp_deplibs
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec" &&
- test "$compiler_needs_object" = yes &&
+ test yes = "$compiler_needs_object" &&
test -z "$libobjs"; then
# extract the archives, so we have objects to list.
# TODO: could optimize this to just extract one archive.
@@ -8261,7 +9857,7 @@ EOF
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
test "X$libobjs" = "X " && libobjs=
else
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $convenience
@@ -8270,18 +9866,18 @@ EOF
fi
fi
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
func_append linker_flags " $flag"
fi
# Make a backup of the uninstalled library when relinking
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
fi
# Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
+ if test yes = "$module" && test -n "$module_cmds"; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
eval test_cmds=\"$module_expsym_cmds\"
cmds=$module_expsym_cmds
@@ -8299,7 +9895,7 @@ EOF
fi
fi
- if test "X$skipped_export" != "X:" &&
+ if test : != "$skipped_export" &&
func_len " $test_cmds" &&
len=$func_len_result &&
test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
@@ -8332,8 +9928,8 @@ EOF
last_robj=
k=1
- if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
- output=${output_objdir}/${output_la}.lnkscript
+ if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
+ output=$output_objdir/$output_la.lnkscript
func_verbose "creating GNU ld script: $output"
echo 'INPUT (' > $output
for obj in $save_libobjs
@@ -8345,14 +9941,14 @@ EOF
func_append delfiles " $output"
func_to_tool_file "$output"
output=$func_to_tool_file_result
- elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
- output=${output_objdir}/${output_la}.lnk
+ elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
+ output=$output_objdir/$output_la.lnk
func_verbose "creating linker input file list: $output"
: > $output
set x $save_libobjs
shift
firstobj=
- if test "$compiler_needs_object" = yes; then
+ if test yes = "$compiler_needs_object"; then
firstobj="$1 "
shift
fi
@@ -8367,7 +9963,7 @@ EOF
else
if test -n "$save_libobjs"; then
func_verbose "creating reloadable object files..."
- output=$output_objdir/$output_la-${k}.$objext
+ output=$output_objdir/$output_la-$k.$objext
eval test_cmds=\"$reload_cmds\"
func_len " $test_cmds"
len0=$func_len_result
@@ -8379,13 +9975,13 @@ EOF
func_len " $obj"
func_arith $len + $func_len_result
len=$func_arith_result
- if test "X$objlist" = X ||
+ if test -z "$objlist" ||
test "$len" -lt "$max_cmd_len"; then
func_append objlist " $obj"
else
# The command $test_cmds is almost too long, add a
# command to the queue.
- if test "$k" -eq 1 ; then
+ if test 1 -eq "$k"; then
# The first file doesn't have a previous command to add.
reload_objs=$objlist
eval concat_cmds=\"$reload_cmds\"
@@ -8395,10 +9991,10 @@ EOF
reload_objs="$objlist $last_robj"
eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
fi
- last_robj=$output_objdir/$output_la-${k}.$objext
+ last_robj=$output_objdir/$output_la-$k.$objext
func_arith $k + 1
k=$func_arith_result
- output=$output_objdir/$output_la-${k}.$objext
+ output=$output_objdir/$output_la-$k.$objext
objlist=" $obj"
func_len " $last_robj"
func_arith $len0 + $func_len_result
@@ -8410,9 +10006,9 @@ EOF
# files will link in the last one created.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
reload_objs="$objlist $last_robj"
- eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ eval concat_cmds=\"\$concat_cmds$reload_cmds\"
if test -n "$last_robj"; then
- eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
func_append delfiles " $output"
@@ -8420,9 +10016,9 @@ EOF
output=
fi
- if ${skipped_export-false}; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
+ ${skipped_export-false} && {
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
$opt_dry_run || $RM $export_symbols
libobjs=$output
# Append the command to create the export file.
@@ -8431,16 +10027,16 @@ EOF
if test -n "$last_robj"; then
eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
- fi
+ }
test -n "$save_libobjs" &&
func_verbose "creating a temporary reloadable object file: $output"
# Loop through the commands generated above and execute them.
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd in $concat_cmds; do
- IFS="$save_ifs"
- $opt_silent || {
+ IFS=$save_ifs
+ $opt_quiet || {
func_quote_for_expand "$cmd"
eval "func_echo $func_quote_for_expand_result"
}
@@ -8448,7 +10044,7 @@ EOF
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
@@ -8457,7 +10053,7 @@ EOF
exit $lt_exit
}
done
- IFS="$save_ifs"
+ IFS=$save_ifs
if test -n "$export_symbols_regex" && ${skipped_export-false}; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
@@ -8465,18 +10061,18 @@ EOF
fi
fi
- if ${skipped_export-false}; then
+ ${skipped_export-false} && {
if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
$opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
if test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
+ # 's' commands, which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
@@ -8485,7 +10081,7 @@ EOF
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
- fi
+ }
libobjs=$output
# Restore the value of output.
@@ -8499,7 +10095,7 @@ EOF
# value of $libobjs for piecewise linking.
# Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
+ if test yes = "$module" && test -n "$module_cmds"; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
cmds=$module_expsym_cmds
else
@@ -8521,7 +10117,7 @@ EOF
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
@@ -8529,11 +10125,12 @@ EOF
test "X$libobjs" = "X " && libobjs=
fi
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd in $cmds; do
- IFS="$save_ifs"
+ IFS=$sp$nl
eval cmd=\"$cmd\"
- $opt_silent || {
+ IFS=$save_ifs
+ $opt_quiet || {
func_quote_for_expand "$cmd"
eval "func_echo $func_quote_for_expand_result"
}
@@ -8541,7 +10138,7 @@ EOF
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
@@ -8550,10 +10147,10 @@ EOF
exit $lt_exit
}
done
- IFS="$save_ifs"
+ IFS=$save_ifs
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
if test -n "$convenience"; then
@@ -8573,39 +10170,39 @@ EOF
done
# If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
+ if test yes = "$module" || test yes = "$export_dynamic"; then
# On all known operating systems, these are identical.
- dlname="$soname"
+ dlname=$soname
fi
fi
;;
obj)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for objects"
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for objects"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ func_warning "'-l' and '-L' are ignored for objects" ;;
esac
test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for objects"
+ func_warning "'-rpath' is ignored for objects"
test -n "$xrpath" && \
- func_warning "\`-R' is ignored for objects"
+ func_warning "'-R' is ignored for objects"
test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for objects"
+ func_warning "'-version-info' is ignored for objects"
test -n "$release" && \
- func_warning "\`-release' is ignored for objects"
+ func_warning "'-release' is ignored for objects"
case $output in
*.lo)
test -n "$objs$old_deplibs" && \
- func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+ func_fatal_error "cannot build library object '$output' from non-libtool objects"
libobj=$output
func_lo2o "$libobj"
@@ -8613,7 +10210,7 @@ EOF
;;
*)
libobj=
- obj="$output"
+ obj=$output
;;
esac
@@ -8626,17 +10223,19 @@ EOF
# the extraction.
reload_conv_objs=
gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec and hope we can get by with
- # turning comma into space..
- wl=
-
+ # if reload_cmds runs $LD directly, get rid of -Wl from
+ # whole_archive_flag_spec and hope we can get by with turning comma
+ # into space.
+ case $reload_cmds in
+ *\$LD[\ \$]*) wl= ;;
+ esac
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
else
- gentop="$output_objdir/${obj}x"
+ gentop=$output_objdir/${obj}x
func_append generated " $gentop"
func_extract_archives $gentop $convenience
@@ -8645,12 +10244,12 @@ EOF
fi
# If we're not building shared, we need to use non_pic_objs
- test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+ test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
# Create the old-style object.
- reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+ reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
- output="$obj"
+ output=$obj
func_execute_cmds "$reload_cmds" 'exit $?'
# Exit if we aren't doing a library object file.
@@ -8662,7 +10261,7 @@ EOF
exit $EXIT_SUCCESS
fi
- if test "$build_libtool_libs" != yes; then
+ test yes = "$build_libtool_libs" || {
if test -n "$gentop"; then
func_show_eval '${RM}r "$gentop"'
fi
@@ -8672,12 +10271,12 @@ EOF
# $show "echo timestamp > $libobj"
# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
exit $EXIT_SUCCESS
- fi
+ }
- if test -n "$pic_flag" || test "$pic_mode" != default; then
+ if test -n "$pic_flag" || test default != "$pic_mode"; then
# Only do commands if we really have different PIC objects.
reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
+ output=$libobj
func_execute_cmds "$reload_cmds" 'exit $?'
fi
@@ -8694,16 +10293,14 @@ EOF
output=$func_stripname_result.exe;;
esac
test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for programs"
+ func_warning "'-version-info' is ignored for programs"
test -n "$release" && \
- func_warning "\`-release' is ignored for programs"
+ func_warning "'-release' is ignored for programs"
- test "$preload" = yes \
- && test "$dlopen_support" = unknown \
- && test "$dlopen_self" = unknown \
- && test "$dlopen_self_static" = unknown && \
- func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+ $preload \
+ && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
+ && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
@@ -8717,11 +10314,11 @@ EOF
*-*-darwin*)
# Don't allow lazy linking, it breaks C++ global constructors
# But is supposedly fixed on 10.4 or later (yay!).
- if test "$tagname" = CXX ; then
+ if test CXX = "$tagname"; then
case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
10.[0123])
- func_append compile_command " ${wl}-bind_at_load"
- func_append finalize_command " ${wl}-bind_at_load"
+ func_append compile_command " $wl-bind_at_load"
+ func_append finalize_command " $wl-bind_at_load"
;;
esac
fi
@@ -8757,7 +10354,7 @@ EOF
*) func_append new_libs " $deplib" ;;
esac
done
- compile_deplibs="$new_libs"
+ compile_deplibs=$new_libs
func_append compile_command " $compile_deplibs"
@@ -8781,7 +10378,7 @@ EOF
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8804,7 +10401,7 @@ EOF
fi
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
- testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+ testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$libdir:"*) ;;
::) dllsearchpath=$libdir;;
@@ -8821,10 +10418,10 @@ EOF
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
- compile_rpath="$rpath"
+ compile_rpath=$rpath
rpath=
hardcode_libdirs=
@@ -8832,7 +10429,7 @@ EOF
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8857,45 +10454,43 @@ EOF
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
- finalize_rpath="$rpath"
+ finalize_rpath=$rpath
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ if test -n "$libobjs" && test yes = "$build_old_libs"; then
# Transform all the library objects into standard objects.
compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
fi
- func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+ func_generate_dlsyms "$outputname" "@PROGRAM@" false
# template prelinking step
if test -n "$prelink_cmds"; then
func_execute_cmds "$prelink_cmds" 'exit $?'
fi
- wrappers_required=yes
+ wrappers_required=:
case $host in
*cegcc* | *mingw32ce*)
# Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
- wrappers_required=no
+ wrappers_required=false
;;
*cygwin* | *mingw* )
- if test "$build_libtool_libs" != yes; then
- wrappers_required=no
- fi
+ test yes = "$build_libtool_libs" || wrappers_required=false
;;
*)
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
- wrappers_required=no
+ if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+ wrappers_required=false
fi
;;
esac
- if test "$wrappers_required" = no; then
+ $wrappers_required || {
# Replace the output file specification.
compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
- link_command="$compile_command$compile_rpath"
+ link_command=$compile_command$compile_rpath
# We have no uninstalled library dependencies, so finalize right now.
exit_status=0
@@ -8908,12 +10503,12 @@ EOF
fi
# Delete the generated files.
- if test -f "$output_objdir/${outputname}S.${objext}"; then
- func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ if test -f "$output_objdir/${outputname}S.$objext"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
fi
exit $exit_status
- fi
+ }
if test -n "$compile_shlibpath$finalize_shlibpath"; then
compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
@@ -8943,9 +10538,9 @@ EOF
fi
fi
- if test "$no_install" = yes; then
+ if test yes = "$no_install"; then
# We don't need to create a wrapper script.
- link_command="$compile_var$compile_command$compile_rpath"
+ link_command=$compile_var$compile_command$compile_rpath
# Replace the output file specification.
link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
# Delete the old output file.
@@ -8962,27 +10557,28 @@ EOF
exit $EXIT_SUCCESS
fi
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
+ case $hardcode_action,$fast_install in
+ relink,*)
+ # Fast installation is not supported
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
- func_warning "this platform does not like uninstalled shared libraries"
- func_warning "\`$output' will be relinked during installation"
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "'$output' will be relinked during installation"
+ ;;
+ *,yes)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ ;;
+ *,no)
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
+ ;;
+ *,needless)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=
+ ;;
+ esac
# Replace the output file specification.
link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
@@ -9039,8 +10635,8 @@ EOF
func_dirname_and_basename "$output" "" "."
output_name=$func_basename_result
output_path=$func_dirname_result
- cwrappersource="$output_path/$objdir/lt-$output_name.c"
- cwrapper="$output_path/$output_name.exe"
+ cwrappersource=$output_path/$objdir/lt-$output_name.c
+ cwrapper=$output_path/$output_name.exe
$RM $cwrappersource $cwrapper
trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
@@ -9061,7 +10657,7 @@ EOF
trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
$opt_dry_run || {
# note: this script will not be executed, so do not chmod.
- if test "x$build" = "x$host" ; then
+ if test "x$build" = "x$host"; then
$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
else
func_emit_wrapper no > $func_ltwrapper_scriptname_result
@@ -9084,25 +10680,27 @@ EOF
# See if we need to build an old-fashioned archive.
for oldlib in $oldlibs; do
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save $symfileobj"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
+ case $build_libtool_libs in
+ convenience)
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs=$convenience
build_libtool_libs=no
- else
+ ;;
+ module)
+ oldobjs=$libobjs_save
+ addlibs=$old_convenience
+ build_libtool_libs=no
+ ;;
+ *)
oldobjs="$old_deplibs $non_pic_objects"
- if test "$preload" = yes && test -f "$symfileobj"; then
- func_append oldobjs " $symfileobj"
- fi
- fi
- addlibs="$old_convenience"
- fi
+ $preload && test -f "$symfileobj" \
+ && func_append oldobjs " $symfileobj"
+ addlibs=$old_convenience
+ ;;
+ esac
if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $addlibs
@@ -9110,13 +10708,13 @@ EOF
fi
# Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
cmds=$old_archive_from_new_cmds
else
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
@@ -9137,7 +10735,7 @@ EOF
:
else
echo "copying selected object files to avoid basename conflicts..."
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_mkdir_p "$gentop"
save_oldobjs=$oldobjs
@@ -9146,7 +10744,7 @@ EOF
for obj in $save_oldobjs
do
func_basename "$obj"
- objbase="$func_basename_result"
+ objbase=$func_basename_result
case " $oldobjs " in
" ") oldobjs=$obj ;;
*[\ /]"$objbase "*)
@@ -9215,18 +10813,18 @@ EOF
else
# the above command should be used before it gets too long
oldobjs=$objlist
- if test "$obj" = "$last_oldobj" ; then
+ if test "$obj" = "$last_oldobj"; then
RANLIB=$save_RANLIB
fi
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
objlist=
len=$len0
fi
done
RANLIB=$save_RANLIB
oldobjs=$objlist
- if test "X$oldobjs" = "X" ; then
+ if test -z "$oldobjs"; then
eval cmds=\"\$concat_cmds\"
else
eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
@@ -9243,7 +10841,7 @@ EOF
case $output in
*.la)
old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
+ test yes = "$build_old_libs" && old_library=$libname.$libext
func_verbose "creating $output"
# Preserve any variables that may affect compiler behavior
@@ -9258,31 +10856,31 @@ EOF
fi
done
# Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
- if test "$hardcode_automatic" = yes ; then
+ if test yes = "$hardcode_automatic"; then
relink_command=
fi
# Only create the output if not a dry run.
$opt_dry_run || {
for installed in no yes; do
- if test "$installed" = yes; then
+ if test yes = "$installed"; then
if test -z "$install_libdir"; then
break
fi
- output="$output_objdir/$outputname"i
+ output=$output_objdir/${outputname}i
# Replace all uninstalled libtool libraries with the installed ones
newdependency_libs=
for deplib in $dependency_libs; do
case $deplib in
*.la)
func_basename "$deplib"
- name="$func_basename_result"
+ name=$func_basename_result
func_resolve_sysroot "$deplib"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_fatal_error "'$deplib' is not a valid libtool archive"
func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
;;
-L*)
@@ -9298,23 +10896,23 @@ EOF
*) func_append newdependency_libs " $deplib" ;;
esac
done
- dependency_libs="$newdependency_libs"
+ dependency_libs=$newdependency_libs
newdlfiles=
for lib in $dlfiles; do
case $lib in
*.la)
func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_fatal_error "'$lib' is not a valid libtool archive"
func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
;;
*) func_append newdlfiles " $lib" ;;
esac
done
- dlfiles="$newdlfiles"
+ dlfiles=$newdlfiles
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
@@ -9324,34 +10922,34 @@ EOF
# didn't already link the preopened objects directly into
# the library:
func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_fatal_error "'$lib' is not a valid libtool archive"
func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
;;
esac
done
- dlprefiles="$newdlprefiles"
+ dlprefiles=$newdlprefiles
else
newdlfiles=
for lib in $dlfiles; do
case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
*) abs=`pwd`"/$lib" ;;
esac
func_append newdlfiles " $abs"
done
- dlfiles="$newdlfiles"
+ dlfiles=$newdlfiles
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
*) abs=`pwd`"/$lib" ;;
esac
func_append newdlprefiles " $abs"
done
- dlprefiles="$newdlprefiles"
+ dlprefiles=$newdlprefiles
fi
$RM $output
# place dlname in correct position for cygwin
@@ -9367,10 +10965,9 @@ EOF
case $host,$output,$installed,$module,$dlname in
*cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
# If a -bindir argument was supplied, place the dll there.
- if test "x$bindir" != x ;
- then
+ if test -n "$bindir"; then
func_relative_path "$install_libdir" "$bindir"
- tdlname=$func_relative_path_result$dlname
+ tdlname=$func_relative_path_result/$dlname
else
# Otherwise fall back on heuristic.
tdlname=../bin/$dlname
@@ -9379,7 +10976,7 @@ EOF
esac
$ECHO > $output "\
# $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
@@ -9393,7 +10990,7 @@ library_names='$library_names'
# The name of the static archive.
old_library='$old_library'
-# Linker flags that can not go in dependency_libs.
+# Linker flags that cannot go in dependency_libs.
inherited_linker_flags='$new_inherited_linker_flags'
# Libraries that this one depends upon.
@@ -9419,7 +11016,7 @@ dlpreopen='$dlprefiles'
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
- if test "$installed" = no && test "$need_relink" = yes; then
+ if test no,yes = "$installed,$need_relink"; then
$ECHO >> $output "\
relink_command=\"$relink_command\""
fi
@@ -9434,27 +11031,29 @@ relink_command=\"$relink_command\""
exit $EXIT_SUCCESS
}
-{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
- func_mode_link ${1+"$@"}
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+ func_mode_link ${1+"$@"}
+fi
# func_mode_uninstall arg...
func_mode_uninstall ()
{
- $opt_debug
- RM="$nonopt"
+ $debug_cmd
+
+ RM=$nonopt
files=
- rmforce=
+ rmforce=false
exit_status=0
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
- libtool_install_magic="$magic"
+ libtool_install_magic=$magic
for arg
do
case $arg in
- -f) func_append RM " $arg"; rmforce=yes ;;
+ -f) func_append RM " $arg"; rmforce=: ;;
-*) func_append RM " $arg" ;;
*) func_append files " $arg" ;;
esac
@@ -9467,18 +11066,18 @@ func_mode_uninstall ()
for file in $files; do
func_dirname "$file" "" "."
- dir="$func_dirname_result"
- if test "X$dir" = X.; then
- odir="$objdir"
+ dir=$func_dirname_result
+ if test . = "$dir"; then
+ odir=$objdir
else
- odir="$dir/$objdir"
+ odir=$dir/$objdir
fi
func_basename "$file"
- name="$func_basename_result"
- test "$opt_mode" = uninstall && odir="$dir"
+ name=$func_basename_result
+ test uninstall = "$opt_mode" && odir=$dir
# Remember odir for removal later, being careful to avoid duplicates
- if test "$opt_mode" = clean; then
+ if test clean = "$opt_mode"; then
case " $rmdirs " in
*" $odir "*) ;;
*) func_append rmdirs " $odir" ;;
@@ -9493,11 +11092,11 @@ func_mode_uninstall ()
elif test -d "$file"; then
exit_status=1
continue
- elif test "$rmforce" = yes; then
+ elif $rmforce; then
continue
fi
- rmfiles="$file"
+ rmfiles=$file
case $name in
*.la)
@@ -9511,7 +11110,7 @@ func_mode_uninstall ()
done
test -n "$old_library" && func_append rmfiles " $odir/$old_library"
- case "$opt_mode" in
+ case $opt_mode in
clean)
case " $library_names " in
*" $dlname "*) ;;
@@ -9522,12 +11121,12 @@ func_mode_uninstall ()
uninstall)
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
- func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
fi
if test -n "$old_library"; then
# Do each command in the old_postuninstall commands.
- func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
fi
# FIXME: should reinstall the best remaining shared library.
;;
@@ -9543,21 +11142,19 @@ func_mode_uninstall ()
func_source $dir/$name
# Add PIC object to the list of files to remove.
- if test -n "$pic_object" &&
- test "$pic_object" != none; then
+ if test -n "$pic_object" && test none != "$pic_object"; then
func_append rmfiles " $dir/$pic_object"
fi
# Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" &&
- test "$non_pic_object" != none; then
+ if test -n "$non_pic_object" && test none != "$non_pic_object"; then
func_append rmfiles " $dir/$non_pic_object"
fi
fi
;;
*)
- if test "$opt_mode" = clean ; then
+ if test clean = "$opt_mode"; then
noexename=$name
case $file in
*.exe)
@@ -9584,12 +11181,12 @@ func_mode_uninstall ()
# note $name still contains .exe if it was in $file originally
# as does the version of $file that was added into $rmfiles
- func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
+ func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+ if test yes = "$fast_install" && test -n "$relink_command"; then
func_append rmfiles " $odir/lt-$name"
fi
- if test "X$noexename" != "X$name" ; then
- func_append rmfiles " $odir/lt-${noexename}.c"
+ if test "X$noexename" != "X$name"; then
+ func_append rmfiles " $odir/lt-$noexename.c"
fi
fi
fi
@@ -9598,7 +11195,7 @@ func_mode_uninstall ()
func_show_eval "$RM $rmfiles" 'exit_status=1'
done
- # Try to remove the ${objdir}s in the directories where we deleted files
+ # Try to remove the $objdir's in the directories where we deleted files
for dir in $rmdirs; do
if test -d "$dir"; then
func_show_eval "rmdir $dir >/dev/null 2>&1"
@@ -9608,16 +11205,17 @@ func_mode_uninstall ()
exit $exit_status
}
-{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
- func_mode_uninstall ${1+"$@"}
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+ func_mode_uninstall ${1+"$@"}
+fi
test -z "$opt_mode" && {
- help="$generic_help"
+ help=$generic_help
func_fatal_help "you must specify a MODE"
}
test -z "$exec_cmd" && \
- func_fatal_help "invalid operation mode \`$opt_mode'"
+ func_fatal_help "invalid operation mode '$opt_mode'"
if test -n "$exec_cmd"; then
eval exec "$exec_cmd"
@@ -9628,7 +11226,7 @@ exit $exit_status
# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries. Given conflicting
+# where we disable both kinds of libraries. Given conflicting
# choices, we go for a static library, that is the most portable,
# since we can't tell whether shared libraries were disabled because
# the user asked for that or because the platform doesn't support
@@ -9651,5 +11249,3 @@ build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
# mode:shell-script
# sh-indentation:2
# End:
-# vi:sw=2
-
diff --git a/missing b/missing
index 86a8fc3..1fe1611 100755
--- a/missing
+++ b/missing
@@ -1,11 +1,10 @@
#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
+# Common wrapper for a few potentially missing GNU programs.
-scriptversion=2012-01-06.13; # UTC
+scriptversion=2018-03-07.03; # UTC
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+# Copyright (C) 1996-2021 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -18,7 +17,7 @@ scriptversion=2012-01-06.13; # UTC
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# along with this program. If not, see <https://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -26,68 +25,40 @@ scriptversion=2012-01-06.13; # UTC
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
+ echo 1>&2 "Try '$0 --help' for more information"
exit 1
fi
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
+case $1 in
-msg="missing on your system"
+ --is-lightweight)
+ # Used by our autoconf macros to check whether the available missing
+ # script is modern enough.
+ exit 0
+ ;;
-case $1 in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
+ --run)
+ # Back-compat with the calling convention used by older automake.
+ shift
+ ;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+ aclocal autoconf autoheader autom4te automake makeinfo
+ bison yacc flex lex help2man
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
Send bug reports to <bug-automake@gnu.org>."
exit $?
@@ -99,233 +70,146 @@ Send bug reports to <bug-automake@gnu.org>."
;;
-*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
+ echo 1>&2 "$0: unknown '$1' option"
+ echo 1>&2 "Try '$0 --help' for more information"
exit 1
;;
esac
-# normalize program name to check for.
-program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program). This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
- lex*|yacc*)
- # Not GNU programs, they don't have --version.
- ;;
-
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running `$TOOL --version' or `$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
- aclocal*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case $f in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te*)
- echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison*|yacc*)
- echo 1>&2 "\
-WARNING: \`$1' $msg. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if test ! -f y.tab.h; then
- echo >y.tab.h
- fi
- if test ! -f y.tab.c; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex*|flex*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if test ! -f lex.yy.c; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit $?
- fi
- ;;
-
- makeinfo*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
- fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
- touch $file
- ;;
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch. This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+ msg="probably too old"
+elif test $st -eq 127; then
+ # Program was missing.
+ msg="missing on your system"
+else
+ # Program was found and executed, but failed. Give up.
+ exit $st
+fi
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
+perl_URL=https://www.perl.org/
+flex_URL=https://github.com/westes/flex
+gnu_software_URL=https://www.gnu.org/software
+
+program_details ()
+{
+ case $1 in
+ aclocal|automake)
+ echo "The '$1' program is part of the GNU Automake package:"
+ echo "<$gnu_software_URL/automake>"
+ echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/autoconf>"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ autoconf|autom4te|autoheader)
+ echo "The '$1' program is part of the GNU Autoconf package:"
+ echo "<$gnu_software_URL/autoconf/>"
+ echo "It also requires GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ esac
+}
+
+give_advice ()
+{
+ # Normalize program name to check for.
+ normalized_program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+ printf '%s\n' "'$1' is $msg."
+
+ configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+ case $normalized_program in
+ autoconf*)
+ echo "You should only need it if you modified 'configure.ac',"
+ echo "or m4 files included by it."
+ program_details 'autoconf'
+ ;;
+ autoheader*)
+ echo "You should only need it if you modified 'acconfig.h' or"
+ echo "$configure_deps."
+ program_details 'autoheader'
+ ;;
+ automake*)
+ echo "You should only need it if you modified 'Makefile.am' or"
+ echo "$configure_deps."
+ program_details 'automake'
+ ;;
+ aclocal*)
+ echo "You should only need it if you modified 'acinclude.m4' or"
+ echo "$configure_deps."
+ program_details 'aclocal'
+ ;;
+ autom4te*)
+ echo "You might have modified some maintainer files that require"
+ echo "the 'autom4te' program to be rebuilt."
+ program_details 'autom4te'
+ ;;
+ bison*|yacc*)
+ echo "You should only need it if you modified a '.y' file."
+ echo "You may want to install the GNU Bison package:"
+ echo "<$gnu_software_URL/bison/>"
+ ;;
+ lex*|flex*)
+ echo "You should only need it if you modified a '.l' file."
+ echo "You may want to install the Fast Lexical Analyzer package:"
+ echo "<$flex_URL>"
+ ;;
+ help2man*)
+ echo "You should only need it if you modified a dependency" \
+ "of a man page."
+ echo "You may want to install the GNU Help2man package:"
+ echo "<$gnu_software_URL/help2man/>"
;;
-esac
-
-exit 0
+ makeinfo*)
+ echo "You should only need it if you modified a '.texi' file, or"
+ echo "any other file indirectly affecting the aspect of the manual."
+ echo "You might want to install the Texinfo package:"
+ echo "<$gnu_software_URL/texinfo/>"
+ echo "The spurious makeinfo call might also be the consequence of"
+ echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+ echo "want to install GNU make:"
+ echo "<$gnu_software_URL/make/>"
+ ;;
+ *)
+ echo "You might have modified some files without having the proper"
+ echo "tools for further handling them. Check the 'README' file, it"
+ echo "often tells you about the needed prerequisites for installing"
+ echo "this package. You may also peek at any GNU archive site, in"
+ echo "case some other package contains this missing '$1' program."
+ ;;
+ esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+ -e '2,$s/^/ /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
diff --git a/mkinstalldirs b/mkinstalldirs
deleted file mode 100755
index 55d537f..0000000
--- a/mkinstalldirs
+++ /dev/null
@@ -1,162 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-
-scriptversion=2009-04-28.21; # UTC
-
-# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain.
-#
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-nl='
-'
-IFS=" "" $nl"
-errstatus=0
-dirmode=
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
-
-Create each directory DIR (with mode MODE, if specified), including all
-leading file name components.
-
-Report bugs to <bug-automake@gnu.org>."
-
-# process command line arguments
-while test $# -gt 0 ; do
- case $1 in
- -h | --help | --h*) # -h for help
- echo "$usage"
- exit $?
- ;;
- -m) # -m PERM arg
- shift
- test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
- dirmode=$1
- shift
- ;;
- --version)
- echo "$0 $scriptversion"
- exit $?
- ;;
- --) # stop option processing
- shift
- break
- ;;
- -*) # unknown option
- echo "$usage" 1>&2
- exit 1
- ;;
- *) # first non-opt arg
- break
- ;;
- esac
-done
-
-for file
-do
- if test -d "$file"; then
- shift
- else
- break
- fi
-done
-
-case $# in
- 0) exit 0 ;;
-esac
-
-# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
-# mkdir -p a/c at the same time, both will detect that a is missing,
-# one will create a, then the other will try to create a and die with
-# a "File exists" error. This is a problem when calling mkinstalldirs
-# from a parallel make. We use --version in the probe to restrict
-# ourselves to GNU mkdir, which is thread-safe.
-case $dirmode in
- '')
- if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- echo "mkdir -p -- $*"
- exec mkdir -p -- "$@"
- else
- # On NextStep and OpenStep, the 'mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because '.' already
- # exists.
- test -d ./-p && rmdir ./-p
- test -d ./--version && rmdir ./--version
- fi
- ;;
- *)
- if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
- test ! -d ./--version; then
- echo "mkdir -m $dirmode -p -- $*"
- exec mkdir -m "$dirmode" -p -- "$@"
- else
- # Clean up after NextStep and OpenStep mkdir.
- for d in ./-m ./-p ./--version "./$dirmode";
- do
- test -d $d && rmdir $d
- done
- fi
- ;;
-esac
-
-for file
-do
- case $file in
- /*) pathcomp=/ ;;
- *) pathcomp= ;;
- esac
- oIFS=$IFS
- IFS=/
- set fnord $file
- shift
- IFS=$oIFS
-
- for d
- do
- test "x$d" = x && continue
-
- pathcomp=$pathcomp$d
- case $pathcomp in
- -*) pathcomp=./$pathcomp ;;
- esac
-
- if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp"
-
- mkdir "$pathcomp" || lasterr=$?
-
- if test ! -d "$pathcomp"; then
- errstatus=$lasterr
- else
- if test ! -z "$dirmode"; then
- echo "chmod $dirmode $pathcomp"
- lasterr=
- chmod "$dirmode" "$pathcomp" || lasterr=$?
-
- if test ! -z "$lasterr"; then
- errstatus=$lasterr
- fi
- fi
- fi
- fi
-
- pathcomp=$pathcomp/
- done
-done
-
-exit $errstatus
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/po/LINGUAS b/po/LINGUAS
index 107b4dc..04a6202 100644
--- a/po/LINGUAS
+++ b/po/LINGUAS
@@ -11,6 +11,7 @@ bg
bn
bn_IN
br
+bs
ca
ca@valencia
crh
@@ -30,7 +31,9 @@ eu
fa
fi
fr
+fur
ga
+gd
gl
gu
he
diff --git a/po/Makefile.in.in b/po/Makefile.in.in
index 06a8cfe..fcd2c3b 100644
--- a/po/Makefile.in.in
+++ b/po/Makefile.in.in
@@ -33,8 +33,7 @@ exec_prefix = @exec_prefix@
datadir = @datadir@
datarootdir = @datarootdir@
libdir = @libdir@
-DATADIRNAME = @DATADIRNAME@
-itlocaledir = $(prefix)/$(DATADIRNAME)/locale
+localedir = @localedir@
subdir = po
install_sh = @install_sh@
# Automake >= 1.8 provides @mkdir_p@.
@@ -80,7 +79,7 @@ INTLTOOL__v_MSGFMT_0 = @echo " MSGFMT" $@;
.po.pox:
$(MAKE) $(GETTEXT_PACKAGE).pot
- $(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox
+ $(MSGMERGE) $* $(GETTEXT_PACKAGE).pot -o $*.pox
.po.mo:
$(INTLTOOL_V_MSGFMT)$(MSGFMT) -o $@ $<
@@ -108,7 +107,7 @@ install-data-no: all
install-data-yes: all
linguas="$(USE_LINGUAS)"; \
for lang in $$linguas; do \
- dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \
+ dir=$(DESTDIR)$(localedir)/$$lang/LC_MESSAGES; \
$(mkdir_p) $$dir; \
if test -r $$lang.gmo; then \
$(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \
@@ -142,8 +141,8 @@ install-exec installcheck:
uninstall:
linguas="$(USE_LINGUAS)"; \
for lang in $$linguas; do \
- rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \
- rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \
+ rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \
+ rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \
done
check: all $(GETTEXT_PACKAGE).pot
diff --git a/po/bs.po b/po/bs.po
new file mode 100644
index 0000000..a80ae52
--- /dev/null
+++ b/po/bs.po
@@ -0,0 +1,249 @@
+msgid ""
+msgstr ""
+"Project-Id-Version: gnome-screensaver\n"
+"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-"
+"screensaver&keywords=I18N+L10N&component=general\n"
+"POT-Creation-Date: 2015-02-26 20:30+0000\n"
+"PO-Revision-Date: 2015-02-04 15:52+0000\n"
+"Last-Translator: Samir Ribić <Unknown>\n"
+"Language-Team: Bosnian <bs@li.org>\n"
+"Language: bs\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
+"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
+"X-Launchpad-Export-Date: 2015-02-05 07:04+0000\n"
+"X-Generator: Launchpad (build 17331)\n"
+
+#: ../src/gnome-screensaver-command.c:46
+msgid "Causes the screensaver to exit gracefully"
+msgstr "Čini da čuvar ekrana bude zaustavljen prirodno"
+
+#: ../src/gnome-screensaver-command.c:48
+msgid "Query the state of the screensaver"
+msgstr "Ispitaj stanje čuvara ekrana"
+
+#: ../src/gnome-screensaver-command.c:50
+msgid "Query the length of time the screensaver has been active"
+msgstr "Ispituj vrijeme za koje je čuvar ekrana bio aktivan"
+
+#: ../src/gnome-screensaver-command.c:52
+msgid "Tells the running screensaver process to lock the screen immediately"
+msgstr "Govori pokrenutom procesu čuvara ekrana da odmah zaključa ekran"
+
+#: ../src/gnome-screensaver-command.c:54
+msgid "Turn the screensaver on (blank the screen)"
+msgstr "Uključi čuvara ekrana (očisti ekran)"
+
+#: ../src/gnome-screensaver-command.c:56
+msgid "If the screensaver is active then deactivate it (un-blank the screen)"
+msgstr ""
+"Ako je čuvar ekrana prisutan, prekini ga (vrati pređašnju sliku na ekranu)"
+
+#: ../src/gnome-screensaver-command.c:58 ../src/gnome-screensaver-dialog.c:59
+#: ../src/gnome-screensaver.c:56
+msgid "Version of this application"
+msgstr "Verzija ovog programa"
+
+#: ../src/gnome-screensaver-command.c:224
+#, c-format
+msgid "The screensaver is active\n"
+msgstr "Čuvar ekrana je pokrenut\n"
+
+#: ../src/gnome-screensaver-command.c:226
+#, c-format
+msgid "The screensaver is inactive\n"
+msgstr "Čuvar ekrana je isključen\n"
+
+#: ../src/gnome-screensaver-command.c:256
+#, c-format
+msgid "The screensaver has been active for %d second.\n"
+msgid_plural "The screensaver has been active for %d seconds.\n"
+msgstr[0] "Čuvar ekrana je aktivan %d sekundu.\n"
+msgstr[1] "Čuvar ekrana je aktivan %d sekunde.\n"
+msgstr[2] "Čuvar ekrana je aktivan %d sekundi.\n"
+
+#: ../src/gnome-screensaver-command.c:258
+#, c-format
+msgid "The screensaver is not currently active.\n"
+msgstr "Čuvar ekrana je trenutno zaustavljen.\n"
+
+#: ../src/gnome-screensaver-dialog.c:57
+msgid "Show debugging output"
+msgstr "Prikaži ispis za traženje grešaka"
+
+#: ../src/gnome-screensaver-dialog.c:61
+msgid "Show the logout button"
+msgstr "Prikaži dugme za odjavu"
+
+#: ../src/gnome-screensaver-dialog.c:63
+msgid "Command to invoke from the logout button"
+msgstr "Naredba koja se poziva pritiskom na dugme za odjavu"
+
+#: ../src/gnome-screensaver-dialog.c:65
+msgid "Show the switch user button"
+msgstr "Prikaži dugme za promjenu korisnika"
+
+#: ../src/gnome-screensaver-dialog.c:67
+msgid "Message to show in the dialog"
+msgstr "Poruka za prikaz u prozorčetu"
+
+#. Translators: This is the example input for the --status-message command linije option.
+#. Translators: This is the example input for the --away-message command linije option.
+#: ../src/gnome-screensaver-dialog.c:69 ../src/gnome-screensaver-dialog.c:73
+msgid "MESSAGE"
+msgstr "PORUKA"
+
+#: ../src/gnome-screensaver-dialog.c:71
+msgid "Not used"
+msgstr "Nije u upotrebi"
+
+#. login: is whacked always translate to Username:
+#: ../src/gnome-screensaver-dialog.c:183 ../src/gnome-screensaver-dialog.c:184
+#: ../src/gnome-screensaver-dialog.c:185 ../src/gs-auth-pam.c:698
+msgid "Username:"
+msgstr "Korisničko ime:"
+
+#: ../src/gnome-screensaver-dialog.c:186 ../src/gnome-screensaver-dialog.c:187
+#: ../src/gs-auth-pam.c:166
+msgid "Password:"
+msgstr "Šifra:"
+
+#: ../src/gnome-screensaver-dialog.c:188
+msgid "You are required to change your password immediately (password aged)"
+msgstr "Morate odmah promijeniti Vašu lozinku (zastarjela lozinka)"
+
+#: ../src/gnome-screensaver-dialog.c:189
+msgid "You are required to change your password immediately (root enforced)"
+msgstr "Morate odmah promijeniti Vašu lozinku (administrator je naredio)"
+
+#: ../src/gnome-screensaver-dialog.c:190
+msgid "Your account has expired; please contact your system administrator"
+msgstr "Vaš nalog je istekao; molim kontaktirajte administratora sistema"
+
+#: ../src/gnome-screensaver-dialog.c:191
+msgid "No password supplied"
+msgstr "Lozinka nije unijeta"
+
+#: ../src/gnome-screensaver-dialog.c:192
+msgid "Password unchanged"
+msgstr "Lozinka nije izmijenjena"
+
+#: ../src/gnome-screensaver-dialog.c:193
+msgid "Cannot get username"
+msgstr "Ne mogu da dobijem korisničko ime"
+
+#: ../src/gnome-screensaver-dialog.c:194
+msgid "Retype new Unix password:"
+msgstr "Ponovite Unixovu lozinku:"
+
+#: ../src/gnome-screensaver-dialog.c:195
+msgid "Enter new Unix password:"
+msgstr "Unesite novu Unixovu lozinku:"
+
+#: ../src/gnome-screensaver-dialog.c:196
+msgid "(current) Unix password:"
+msgstr "(trenutna) Unixova lozinka:"
+
+#: ../src/gnome-screensaver-dialog.c:197
+msgid "Error while changing NIS password."
+msgstr "Greška pri izmjeni NIS lozinke."
+
+#: ../src/gnome-screensaver-dialog.c:198
+msgid "You must choose a longer password"
+msgstr "Morate sa odaberete dužu lozinku"
+
+#: ../src/gnome-screensaver-dialog.c:199
+msgid "Password has been already used. Choose another."
+msgstr "Lozinka je već u upotrebi. Izaberite drugu."
+
+#: ../src/gnome-screensaver-dialog.c:200
+msgid "You must wait longer to change your password"
+msgstr "Morate da čekate duže za promjenu Vaše šifre"
+
+#: ../src/gnome-screensaver-dialog.c:201
+msgid "Sorry, passwords do not match"
+msgstr "Lozinke se ne poklapaju"
+
+#: ../src/gnome-screensaver-dialog.c:267
+msgid "Checking…"
+msgstr "Provjeravam…"
+
+#: ../src/gnome-screensaver-dialog.c:309 ../src/gs-auth-pam.c:457
+msgid "Authentication failed."
+msgstr "Identifikacija neuspjela."
+
+#: ../src/gnome-screensaver.c:57
+msgid "Don't become a daemon"
+msgstr "Nemoj biti pozadinski proces"
+
+#: ../src/gnome-screensaver.c:58
+msgid "Enable debugging code"
+msgstr "Omogući ispis za traženje grešaka"
+
+#: ../src/gnome-screensaver.desktop.in.in.h:1
+msgid "Screensaver"
+msgstr "Čuvar ekrana"
+
+#: ../src/gnome-screensaver.desktop.in.in.h:2
+msgid "Launch screensaver and locker program"
+msgstr "Pokreće čuvara ekrana i program za zaključavanje ekrana"
+
+#: ../src/gs-auth-pam.c:397
+#, c-format
+msgid "Unable to establish service %s: %s\n"
+msgstr "Ne mogu da postavim uslužni program %s: %s\n"
+
+#: ../src/gs-auth-pam.c:423
+#, c-format
+msgid "Can't set PAM_TTY=%s"
+msgstr "Ne mogu da postavim PAM_TTY=%s"
+
+#: ../src/gs-auth-pam.c:455
+msgid "Incorrect password."
+msgstr "Neisipravna lozinka."
+
+#: ../src/gs-auth-pam.c:471
+msgid "Not permitted to gain access at this time."
+msgstr "Pristup u ovo vrijeme nije dozvoljen."
+
+#: ../src/gs-auth-pam.c:477
+msgid "No longer permitted to access the system."
+msgstr "Više nemate dozvolu za pristup sistemu."
+
+#: ../src/gs-listener-dbus.c:1284
+msgid "failed to register with the message bus"
+msgstr "neuspjela prijava na magistralu poruka"
+
+#: ../src/gs-listener-dbus.c:1294
+msgid "not connected to the message bus"
+msgstr "nije povezan na magistralu poruka"
+
+#: ../src/gs-listener-dbus.c:1303 ../src/gs-listener-dbus.c:1333
+msgid "screensaver already running in this session"
+msgstr "čuvar ekrana je već pokrenut u ovoj sesiji"
+
+#: ../src/gs-lock-plug.c:255
+msgid "Time has expired."
+msgstr "Vrijeme je isteklo."
+
+#: ../src/gs-lock-plug.c:286
+msgid "You have the Caps Lock key on."
+msgstr "Pritisnuli ste taster za sva velika slova."
+
+#: ../src/gs-lock-plug.c:1350
+msgid "S_witch User…"
+msgstr "Promijeni _korisnika…"
+
+#: ../src/gs-lock-plug.c:1359
+msgid "Log _Out"
+msgstr "Odja_va"
+
+#: ../src/gs-lock-plug.c:1366
+msgid "_Unlock"
+msgstr "Ot_ključaj"
+
+#: ../src/gs-lock-plug.c:1405
+msgid "_Password:"
+msgstr "_Lozinka:"
diff --git a/po/fur.po b/po/fur.po
new file mode 100644
index 0000000..94bc5aa
--- /dev/null
+++ b/po/fur.po
@@ -0,0 +1,250 @@
+# Friulian translation for gnome-screensaver.
+# Copyright (C) 2012 gnome-screensaver's COPYRIGHT HOLDER
+# This file is distributed under the same license as the gnome-screensaver package.
+# TmTFx <f.t.public@gmail.com>, 2012.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: gnome-screensaver gnome-3-6\n"
+"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-"
+"screensaver&keywords=I18N+L10N&component=general\n"
+"POT-Creation-Date: 2012-11-30 10:04+0000\n"
+"PO-Revision-Date: 2012-12-28 09:35+0100\n"
+"Last-Translator: TmTFx <f.t.public@gmail.com>\n"
+"Language-Team: Friulian <fur@li.org>\n"
+"Language: fur\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../src/gnome-screensaver-command.c:46
+msgid "Causes the screensaver to exit gracefully"
+msgstr "Al fas jessi dolcementri il salvevisôr"
+
+#: ../src/gnome-screensaver-command.c:48
+msgid "Query the state of the screensaver"
+msgstr "Interroghe il stât dal salvevisôr"
+
+#: ../src/gnome-screensaver-command.c:50
+msgid "Query the length of time the screensaver has been active"
+msgstr "Interroghe trop timp il salvevisôr al è stât atîf"
+
+#: ../src/gnome-screensaver-command.c:52
+msgid "Tells the running screensaver process to lock the screen immediately"
+msgstr "Dîs al process in vore dal salvevisôr che al blochi il visôr subite"
+
+#: ../src/gnome-screensaver-command.c:54
+msgid "Turn the screensaver on (blank the screen)"
+msgstr "Pìe il salvevisôr (visôr vueit)"
+
+#: ../src/gnome-screensaver-command.c:56
+msgid "If the screensaver is active then deactivate it (un-blank the screen)"
+msgstr "Se il salvevisôr al è atîf alore disativilu (jemple il visôr)"
+
+#: ../src/gnome-screensaver-command.c:58 ../src/gnome-screensaver-dialog.c:59
+#: ../src/gnome-screensaver.c:56
+msgid "Version of this application"
+msgstr "Version de aplicazion"
+
+#: ../src/gnome-screensaver-command.c:224
+#, c-format
+msgid "The screensaver is active\n"
+msgstr "Il salvevisôr al è atîf\n"
+
+#: ../src/gnome-screensaver-command.c:226
+#, c-format
+msgid "The screensaver is inactive\n"
+msgstr "Il salvevisôr no'l è atîf\n"
+
+#: ../src/gnome-screensaver-command.c:256
+#, c-format
+msgid "The screensaver has been active for %d second.\n"
+msgid_plural "The screensaver has been active for %d seconds.\n"
+msgstr[0] "Il salvevisôr al è stât atîf par %d secont.\n"
+msgstr[1] "Il salvevisôr al è stât atîf par %d seconts.\n"
+
+#: ../src/gnome-screensaver-command.c:258
+#, c-format
+msgid "The screensaver is not currently active.\n"
+msgstr "Il salvevisôr a no'l è atîf in chest moment.\n"
+
+#: ../src/gnome-screensaver-dialog.c:57
+msgid "Show debugging output"
+msgstr "Mostre la jessude di debug"
+
+#: ../src/gnome-screensaver-dialog.c:61
+msgid "Show the logout button"
+msgstr "Mostre il pipul di logout"
+
+#: ../src/gnome-screensaver-dialog.c:63
+msgid "Command to invoke from the logout button"
+msgstr "Comant da invocâ dal pipul di logout"
+
+#: ../src/gnome-screensaver-dialog.c:65
+msgid "Show the switch user button"
+msgstr "Mostre il pipul par cambiâ utent"
+
+#: ../src/gnome-screensaver-dialog.c:67
+msgid "Message to show in the dialog"
+msgstr "Mesaç di viodi in tal discôrs"
+
+#. Translators: This is the example input for the --status-message command line option.
+#. Translators: This is the example input for the --away-message command line option.
+#: ../src/gnome-screensaver-dialog.c:69 ../src/gnome-screensaver-dialog.c:73
+msgid "MESSAGE"
+msgstr "MESSAÇ"
+
+#: ../src/gnome-screensaver-dialog.c:71
+msgid "Not used"
+msgstr "No doprât"
+
+#. login: is whacked always translate to Username:
+#: ../src/gnome-screensaver-dialog.c:183 ../src/gnome-screensaver-dialog.c:184
+#: ../src/gnome-screensaver-dialog.c:185 ../src/gs-auth-pam.c:698
+msgid "Username:"
+msgstr "Username:"
+
+#: ../src/gnome-screensaver-dialog.c:186 ../src/gnome-screensaver-dialog.c:187
+#: ../src/gs-auth-pam.c:166
+msgid "Password:"
+msgstr "Password:"
+
+#: ../src/gnome-screensaver-dialog.c:188
+msgid "You are required to change your password immediately (password aged)"
+msgstr "Tu scugnis cambiâ la tô password subite (la password a je vecje)"
+
+#: ../src/gnome-screensaver-dialog.c:189
+msgid "You are required to change your password immediately (root enforced)"
+msgstr "Tu scugnis cambiâ la tô password subite (a ti oblee root)"
+
+#: ../src/gnome-screensaver-dialog.c:190
+msgid "Your account has expired; please contact your system administrator"
+msgstr ""
+"Il to account al è scjadût; par plasê contate il to amministratôr di sisteme"
+
+#: ../src/gnome-screensaver-dialog.c:191
+msgid "No password supplied"
+msgstr "No tu as dât une password"
+
+#: ../src/gnome-screensaver-dialog.c:192
+msgid "Password unchanged"
+msgstr "La password no je stade cambiade"
+
+#: ../src/gnome-screensaver-dialog.c:193
+msgid "Cannot get username"
+msgstr "No rivi a vê il non utent"
+
+#: ../src/gnome-screensaver-dialog.c:194
+msgid "Retype new Unix password:"
+msgstr "Riscrîf une gnove password Unix:"
+
+#: ../src/gnome-screensaver-dialog.c:195
+msgid "Enter new Unix password:"
+msgstr "Met une gnove password Unix:"
+
+#: ../src/gnome-screensaver-dialog.c:196
+msgid "(current) Unix password:"
+msgstr "(atuâl) Unix password:"
+
+#: ../src/gnome-screensaver-dialog.c:197
+msgid "Error while changing NIS password."
+msgstr "Erôr intant che a si cambiave le password NIS."
+
+#: ../src/gnome-screensaver-dialog.c:198
+msgid "You must choose a longer password"
+msgstr "Tu as di decidi par une password plui lungje"
+
+#: ../src/gnome-screensaver-dialog.c:199
+msgid "Password has been already used. Choose another."
+msgstr "La password a je giaromai doprade. Decît par un altre."
+
+#: ../src/gnome-screensaver-dialog.c:200
+msgid "You must wait longer to change your password"
+msgstr "Tu as di spietà di plui par podè cambiâ la password"
+
+#: ../src/gnome-screensaver-dialog.c:201
+msgid "Sorry, passwords do not match"
+msgstr "Scuse, la password no je compagne"
+
+#: ../src/gnome-screensaver-dialog.c:267
+msgid "Checking…"
+msgstr "O stoi controlant..."
+
+#: ../src/gnome-screensaver-dialog.c:309 ../src/gs-auth-pam.c:457
+msgid "Authentication failed."
+msgstr "Autenticazion falide."
+
+#: ../src/gnome-screensaver.c:57
+msgid "Don't become a daemon"
+msgstr "No sta diventâ un demoni"
+
+#: ../src/gnome-screensaver.c:58
+msgid "Enable debugging code"
+msgstr "Abilite il codiç di debug"
+
+#: ../src/gnome-screensaver.desktop.in.in.h:1
+msgid "Screensaver"
+msgstr "Salvevisôr"
+
+#: ../src/gnome-screensaver.desktop.in.in.h:2
+msgid "Launch screensaver and locker program"
+msgstr "Fâs partì il program di blocaç e il salvevisôr"
+
+#: ../src/gs-auth-pam.c:397
+#, c-format
+msgid "Unable to establish service %s: %s\n"
+msgstr "Impussibil stabilì il servizi %s: %s\n"
+
+#: ../src/gs-auth-pam.c:423
+#, c-format
+msgid "Can't set PAM_TTY=%s"
+msgstr "No puès impostà PAM_TTY=%s"
+
+#: ../src/gs-auth-pam.c:455
+msgid "Incorrect password."
+msgstr "Password sbagliade."
+
+#: ../src/gs-auth-pam.c:471
+msgid "Not permitted to gain access at this time."
+msgstr "In chest moment no'l è plui permetût di otignî l'access ."
+
+#: ../src/gs-auth-pam.c:477
+msgid "No longer permitted to access the system."
+msgstr "No'l è plui permetût di vê l'access al sisteme."
+
+#: ../src/gs-listener-dbus.c:1285
+msgid "failed to register with the message bus"
+msgstr "falît a regjistrasi cun il bus dai messaçs"
+
+#: ../src/gs-listener-dbus.c:1295
+msgid "not connected to the message bus"
+msgstr "no connetût al bus dai messaçs"
+
+#: ../src/gs-listener-dbus.c:1304 ../src/gs-listener-dbus.c:1334
+msgid "screensaver already running in this session"
+msgstr "il salvevisôr al è bielza in esecuzion in cheste session"
+
+#: ../src/gs-lock-plug.c:255
+msgid "Time has expired."
+msgstr "Il timp al è scjadût."
+
+#: ../src/gs-lock-plug.c:286
+msgid "You have the Caps Lock key on."
+msgstr "Tu as il tast Caps Lock tacât."
+
+#: ../src/gs-lock-plug.c:1350
+msgid "S_witch User…"
+msgstr "C_ambie Utent..."
+
+#: ../src/gs-lock-plug.c:1359
+msgid "Log _Out"
+msgstr "Termine Sessi_On"
+
+#: ../src/gs-lock-plug.c:1366
+msgid "_Unlock"
+msgstr "_Sbloche"
+
+#: ../src/gs-lock-plug.c:1405
+msgid "_Password:"
+msgstr "_Password:"
diff --git a/po/gd.po b/po/gd.po
new file mode 100644
index 0000000..718eb64
--- /dev/null
+++ b/po/gd.po
@@ -0,0 +1,263 @@
+# Gaelic; Scottish translation for gnome-screensaver
+# Copyright (c) 2012 Rosetta Contributors and Canonical Ltd 2012
+# This file is distributed under the same license as the gnome-screensaver package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, 2012.
+# GunChleoc <fios@foramnagaidhlig.net>, 2015.
+msgid ""
+msgstr ""
+"Project-Id-Version: gnome-screensaver\n"
+"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-"
+"screensaver&keywords=I18N+L10N&component=general\n"
+"POT-Creation-Date: 2015-06-25 19:52+0000\n"
+"PO-Revision-Date: 2015-06-25 22:04+0200\n"
+"Last-Translator: GunChleoc <fios@foramnagaidhlig.net>\n"
+"Language-Team: Fòram na Gàidhlig\n"
+"Language: gd\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=4; plural=(n==1 || n==11) ? 0 : (n==2 || n==12) ? 1 : "
+"(n > 2 && n < 20) ? 2 : 3;\n"
+"X-Generator: Virtaal 0.7.1\n"
+"X-Launchpad-Export-Date: 2013-09-15 06:24+0000\n"
+"X-Project-Style: gnome\n"
+
+#: ../src/gnome-screensaver-command.c:46
+msgid "Causes the screensaver to exit gracefully"
+msgstr "Bheir seo air an t-sàbhalaiche-sgrìn gum fàg e gu dòigheil"
+
+#: ../src/gnome-screensaver-command.c:48
+msgid "Query the state of the screensaver"
+msgstr "Faighnich airson staid an t-sàbhalaiche-segrìn"
+
+#: ../src/gnome-screensaver-command.c:50
+msgid "Query the length of time the screensaver has been active"
+msgstr "Faighnich dè cho fad 's a tha an sàbhalaiche-sgrìn gnìomhach"
+
+#: ../src/gnome-screensaver-command.c:52
+msgid "Tells the running screensaver process to lock the screen immediately"
+msgstr ""
+"Innsidh seo do phròiseas an t-sàbhalaiche-sgrìn gun glais e an sgrìn sa bhad"
+
+#: ../src/gnome-screensaver-command.c:54
+msgid "Turn the screensaver on (blank the screen)"
+msgstr "Cuir an sàbhalaiche-sgrìn air (duibhrich an sgrìn)"
+
+#: ../src/gnome-screensaver-command.c:56
+msgid "If the screensaver is active then deactivate it (un-blank the screen)"
+msgstr ""
+"Cuir an sàbhalaiche-sgrìn à gnìomh ma tha e gnìomhach (neo-dhuibhrich an "
+"sgrìn)"
+
+#: ../src/gnome-screensaver-command.c:58 ../src/gnome-screensaver-dialog.c:59
+#: ../src/gnome-screensaver.c:56
+msgid "Version of this application"
+msgstr "Tionndadh a' phrògraim seo"
+
+#: ../src/gnome-screensaver-command.c:224
+#, c-format
+msgid "The screensaver is active\n"
+msgstr "Tha an sàbhalaiche-sgrìn gnìomhach\n"
+
+#: ../src/gnome-screensaver-command.c:226
+#, c-format
+msgid "The screensaver is inactive\n"
+msgstr "Chan eil an sàbhalaiche-sgrìn gnìomhach\n"
+
+#: ../src/gnome-screensaver-command.c:256
+#, c-format
+msgid "The screensaver has been active for %d second.\n"
+msgid_plural "The screensaver has been active for %d seconds.\n"
+msgstr[0] "Tha an sàbhalaiche-sgrìn gnìomhach fad %d diog.\n"
+msgstr[1] "Tha an sàbhalaiche-sgrìn gnìomhach fad %d dhiog.\n"
+msgstr[2] "Tha an sàbhalaiche-sgrìn gnìomhach fad %d diogan.\n"
+msgstr[3] "Tha an sàbhalaiche-sgrìn gnìomhach fad %d diog.\n"
+
+#: ../src/gnome-screensaver-command.c:258
+#, c-format
+msgid "The screensaver is not currently active.\n"
+msgstr "Chan eil an sàbhalaiche-sgrìn gnìomhach an-dràsta.\n"
+
+#: ../src/gnome-screensaver-dialog.c:57
+msgid "Show debugging output"
+msgstr "Seall às-chur an dì-bhugachaidh"
+
+#: ../src/gnome-screensaver-dialog.c:61
+msgid "Show the logout button"
+msgstr "Seall am putan logaidh a-mach"
+
+#: ../src/gnome-screensaver-dialog.c:63
+msgid "Command to invoke from the logout button"
+msgstr "An àithne a thèid a ghairm on phutan logaidh a-mach"
+
+#: ../src/gnome-screensaver-dialog.c:65
+msgid "Show the switch user button"
+msgstr "Seal putan suidsidh eadar cleachdaichean"
+
+#: ../src/gnome-screensaver-dialog.c:67
+msgid "Message to show in the dialog"
+msgstr "An teachdaireachd a thèid a shealltainn sa bhogsa-còmhraidh"
+
+#. Translators: This is the example input for the --status-message command line option.
+#. Translators: This is the example input for the --away-message command line option.
+#: ../src/gnome-screensaver-dialog.c:69 ../src/gnome-screensaver-dialog.c:73
+msgid "MESSAGE"
+msgstr "TEACHDAIREACHD"
+
+#: ../src/gnome-screensaver-dialog.c:71
+msgid "Not used"
+msgstr "Gun chleachdadh"
+
+#. login: is whacked always translate to Username:
+#: ../src/gnome-screensaver-dialog.c:183 ../src/gnome-screensaver-dialog.c:184
+#: ../src/gnome-screensaver-dialog.c:185 ../src/gs-auth-pam.c:698
+msgid "Username:"
+msgstr "Ainm-cleachdaiche:"
+
+#: ../src/gnome-screensaver-dialog.c:186 ../src/gnome-screensaver-dialog.c:187
+#: ../src/gs-auth-pam.c:166
+msgid "Password:"
+msgstr "Facal-faire:"
+
+#: ../src/gnome-screensaver-dialog.c:188
+msgid "You are required to change your password immediately (password aged)"
+msgstr ""
+"Feumaidh tu am facal-faire agad atharrachadh sa bhad (facal-faire ro aosta)"
+
+#: ../src/gnome-screensaver-dialog.c:189
+msgid "You are required to change your password immediately (root enforced)"
+msgstr ""
+"Feumaidh tu am facal-faire agad atharrachadh sa bhad (air èigneachadh le "
+"root)"
+
+#: ../src/gnome-screensaver-dialog.c:190
+msgid "Your account has expired; please contact your system administrator"
+msgstr ""
+"Dh'fhalbh an ùine air a' chunntas agad; feuch an cuir thu fios gu rianaire "
+"an t-siostaim agad"
+
+#: ../src/gnome-screensaver-dialog.c:191
+msgid "No password supplied"
+msgstr "Cha deach facal-faire a' solar"
+
+#: ../src/gnome-screensaver-dialog.c:192
+msgid "Password unchanged"
+msgstr "Tha am facal-faire gun atharrachadh"
+
+#: ../src/gnome-screensaver-dialog.c:193
+msgid "Cannot get username"
+msgstr "Chan urrainn dhuinn an t-ainm-cleachdaiche fhaighinn"
+
+#: ../src/gnome-screensaver-dialog.c:194
+msgid "Retype new Unix password:"
+msgstr "Cuir am facal-faire Unix ùr a-steach a-rithist:"
+
+#: ../src/gnome-screensaver-dialog.c:195
+msgid "Enter new Unix password:"
+msgstr "Cuir facal-faire Unix ùr a-steach:"
+
+#: ../src/gnome-screensaver-dialog.c:196
+msgid "(current) Unix password:"
+msgstr "Am facal-faire Unix (làithreach):"
+
+#: ../src/gnome-screensaver-dialog.c:197
+msgid "Error while changing NIS password."
+msgstr "Mearachd le atharrachadh an fhacail-fhaire NIS."
+
+#: ../src/gnome-screensaver-dialog.c:198
+msgid "You must choose a longer password"
+msgstr "Feumaidh tu facal-faire nas fhaide a thaghadh"
+
+#: ../src/gnome-screensaver-dialog.c:199
+msgid "Password has been already used. Choose another."
+msgstr "Chaidh am facal-faire seo a chleachdadh roimhe. Tagh fear eile."
+
+#: ../src/gnome-screensaver-dialog.c:200
+msgid "You must wait longer to change your password"
+msgstr "Feumaidh tu feitheamh nas fhaide gus am facal-faire agad atharrachadh"
+
+#: ../src/gnome-screensaver-dialog.c:201
+msgid "Sorry, passwords do not match"
+msgstr "Duilich, ach chan eil an dà fhacal-faire co-ionnann"
+
+#: ../src/gnome-screensaver-dialog.c:267
+msgid "Checking…"
+msgstr "'Ga dhearbhadh..."
+
+#: ../src/gnome-screensaver-dialog.c:309 ../src/gs-auth-pam.c:457
+msgid "Authentication failed."
+msgstr "Dh'fhàillig leis an dearbhadh."
+
+#: ../src/gnome-screensaver.c:57
+msgid "Don't become a daemon"
+msgstr "Na rach nad daemon"
+
+#: ../src/gnome-screensaver.c:58
+msgid "Enable debugging code"
+msgstr "Cuir an comas còd dì-bhugachaidh"
+
+#: ../src/gnome-screensaver.desktop.in.in.h:1
+msgid "Screensaver"
+msgstr "Sàbhalaiche-sgrìn"
+
+#: ../src/gnome-screensaver.desktop.in.in.h:2
+msgid "Launch screensaver and locker program"
+msgstr "Tòisich air an t-sàbhalaiche-sgrìn is a' phògram glasaidh"
+
+#: ../src/gs-auth-pam.c:397
+#, c-format
+msgid "Unable to establish service %s: %s\n"
+msgstr "Cha b' urrainn dhuinn an t-seirbheis %s a stèidheachadh: %s\n"
+
+#: ../src/gs-auth-pam.c:423
+#, c-format
+msgid "Can't set PAM_TTY=%s"
+msgstr "Chan urrainn dhuinn PAM_TTY=%s a shuidheachadh"
+
+#: ../src/gs-auth-pam.c:455
+msgid "Incorrect password."
+msgstr "Chan eil am facal-faire mar bu chòir."
+
+#: ../src/gs-auth-pam.c:471
+msgid "Not permitted to gain access at this time."
+msgstr "Chan eil cead inntrigidh agad aig an àm seo."
+
+#: ../src/gs-auth-pam.c:477
+msgid "No longer permitted to access the system."
+msgstr "Chan fhaod thu an siostam inntrigeadh tuilleadh."
+
+#: ../src/gs-listener-dbus.c:1284
+msgid "failed to register with the message bus"
+msgstr "dh'fhàillig le clàradh leis a' bhus theachdaireachdan"
+
+#: ../src/gs-listener-dbus.c:1294
+msgid "not connected to the message bus"
+msgstr "gun cheangal ris a' bhus theachdaireachdan"
+
+#: ../src/gs-listener-dbus.c:1303 ../src/gs-listener-dbus.c:1333
+msgid "screensaver already running in this session"
+msgstr "tha sàbhalaiche-sgrìn 'ga ruith san t-seisean seo mar-thà"
+
+#: ../src/gs-lock-plug.c:255
+msgid "Time has expired."
+msgstr "Dh'fhalbh an ùine air."
+
+#: ../src/gs-lock-plug.c:286
+msgid "You have the Caps Lock key on."
+msgstr "Tha an iuchair Caps Lock agad air."
+
+#: ../src/gs-lock-plug.c:1350
+msgid "S_witch User…"
+msgstr "Gearr _leum gu cleachdaiche eile..."
+
+#: ../src/gs-lock-plug.c:1359
+msgid "Log _Out"
+msgstr "Log _a-mach"
+
+#: ../src/gs-lock-plug.c:1366
+msgid "_Unlock"
+msgstr "_Thoir a' ghlas dheth"
+
+#: ../src/gs-lock-plug.c:1405
+msgid "_Password:"
+msgstr "_Facal-faire:"
diff --git a/po/hr.po b/po/hr.po
index cc2a9c5..9ece3ba 100644
--- a/po/hr.po
+++ b/po/hr.po
@@ -7,675 +7,177 @@ msgid ""
msgstr ""
"Project-Id-Version: gnome-screensaver\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2008-09-09 12:29+0200\n"
-"PO-Revision-Date: 2008-03-22 14:34+0000\n"
-"Last-Translator: Ante Karamatić <ivoks@grad.hr>\n"
+"POT-Creation-Date: 2016-01-04 14:27+0000\n"
+"PO-Revision-Date: 2016-01-05 00:35+0000\n"
+"Last-Translator: Launchpad Translations Administrators <Unknown>\n"
"Language-Team: Croatian <hr@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
-"X-Launchpad-Export-Date: 2008-05-28 00:36+0000\n"
-"X-Generator: Launchpad (build Unknown)\n"
+"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
+"n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
+"X-Launchpad-Export-Date: 2016-09-22 19:52+0000\n"
+"X-Generator: Launchpad (build 18204)\n"
-#: ../data/gnome-screensaver-preferences.desktop.in.h:1
-msgid "Screensaver"
-msgstr "Čuvar zaslona"
-
-#: ../data/gnome-screensaver-preferences.desktop.in.h:2
-msgid "Set your screensaver preferences"
-msgstr "Podesite postavke čuvara zaslona"
-
-#: ../data/gnome-screensaver-preferences.glade.h:1
-msgid "<b>Screensaver preview</b>"
-msgstr "<b>Pregled čuvara zaslona</b>"
-
-#: ../data/gnome-screensaver-preferences.glade.h:2
-msgid "<b>Warning: the screen will not be locked for the root user.</b>"
-msgstr "<b>Upozorenje: zaslon neće biti zaključan za root korisnika.<b>"
-
-#: ../data/gnome-screensaver-preferences.glade.h:3
-msgid "Power _Management"
-msgstr "Upravljanje _energijom"
-
-#: ../data/gnome-screensaver-preferences.glade.h:4
-msgid "Regard the computer as _idle after:"
-msgstr "Smatraj računalo _neaktivnim nakon:"
-
-#: ../data/gnome-screensaver-preferences.glade.h:5
-msgid "Screensaver Preferences"
-msgstr "Postavke čuvara zaslona"
-
-#: ../data/gnome-screensaver-preferences.glade.h:6
-msgid "Screensaver Preview"
-msgstr "Pregled čuvara zaslona"
-
-#: ../data/gnome-screensaver-preferences.glade.h:7
-msgid "_Activate screensaver when computer is idle"
-msgstr "_Pokreni čuvara zaslona kada je računalo neaktivno"
-
-#: ../data/gnome-screensaver-preferences.glade.h:8
-msgid "_Lock screen when screensaver is active"
-msgstr "_Zaključaj zaslon kada je čuvar zaslona aktivan"
-
-#: ../data/gnome-screensaver-preferences.glade.h:9
-msgid "_Preview"
-msgstr "_Pregled"
-
-#: ../data/gnome-screensaver-preferences.glade.h:10
-msgid "_Screensaver theme:"
-msgstr "_Tema čuvara:"
-
-#: ../data/gnome-screensaver.directory.in.h:1
-#: ../data/gnome-screensaver.schemas.in.h:10
-msgid "Screensaver themes"
-msgstr "Teme čuvara zaslona"
-
-#: ../data/gnome-screensaver.directory.in.h:2
-msgid "Screensavers"
-msgstr "Čuvari zaslona"
-
-#: ../data/gnome-screensaver.schemas.in.h:1
-msgid "Activate when idle"
-msgstr "Pokreni dok je je korisnik neaktivan"
-
-#: ../data/gnome-screensaver.schemas.in.h:2
-msgid "Allow embedding a keyboard into the window"
-msgstr "Dozvoli tipkovnicu u prozoru"
-
-#: ../data/gnome-screensaver.schemas.in.h:3
-msgid "Allow logout"
-msgstr "Dozvoli odjavu"
-
-#: ../data/gnome-screensaver.schemas.in.h:4
-msgid "Allow user switching"
-msgstr "Dozvoli prebacivanje korisnika"
-
-#: ../data/gnome-screensaver.schemas.in.h:5
-msgid "Embedded keyboard command"
-msgstr "Naredba tipkovnice"
-
-#: ../data/gnome-screensaver.schemas.in.h:6
-msgid "Lock on activation"
-msgstr "Zaključaj prilikom pokretanja"
-
-#: ../data/gnome-screensaver.schemas.in.h:7
-msgid "Logout command"
-msgstr "Odjavna naredba"
-
-#: ../data/gnome-screensaver.schemas.in.h:8
-msgid "Reason for being away"
-msgstr "Razlog odsutnosti"
-
-#: ../data/gnome-screensaver.schemas.in.h:9
-msgid "Screensaver theme selection mode"
-msgstr "Stanje odabira teme čuvara ekrana"
-
-#: ../data/gnome-screensaver.schemas.in.h:11
-msgid "Set this to TRUE to activate the screensaver when the session is idle."
-msgstr "Postaviti za pokretanje čuvara zaslona prilikom neaktivne prijave."
-
-#: ../data/gnome-screensaver.schemas.in.h:12
-msgid ""
-"Set this to TRUE to allow embedding a keyboard into the window when trying "
-"to unlock. The \"keyboard_command\" key must be set with the appropriate "
-"command."
-msgstr ""
-"Postavite na ISTINITO da bi dozvolili umetanje tipkovnice u prozor pri "
-"pokušaju otključavanja. Tipka \"keyboard_command\" mora biti namještena "
-"odgovarajućom naredbom."
-
-#: ../data/gnome-screensaver.schemas.in.h:13
-msgid "Set this to TRUE to lock the screen when the screensaver goes active."
-msgstr ""
-"Postaviti za zaključavanje zaslona prilikom aktiviranja čuvara zaslona."
-
-#: ../data/gnome-screensaver.schemas.in.h:14
-msgid ""
-"Set this to TRUE to offer an option in the unlock dialog to switch to a "
-"different user account."
-msgstr ""
-"Postaviti za ponudu opcije u dijalogu otključavanja za prebacivanje na drugi "
-"korisnički račun."
-
-#: ../data/gnome-screensaver.schemas.in.h:15
-msgid ""
-"Set this to TRUE to offer an option in unlock dialog to logging out after a "
-"delay. The Delay is specified in the \"logout_delay\" key."
-msgstr ""
-"Postaviti za ponudi opcije u dijalogu otključavanja za odjavljivanje nakon "
-"odgode. Vrijeme odgode je određeno u \"odjava_odgoda\" tipki."
-
-#: ../data/gnome-screensaver.schemas.in.h:16
-msgid ""
-"The command that will be run, if the \"embedded_keyboard_enabled\" key is "
-"set to TRUE, to embed a keyboard widget into the window. This command should "
-"implement an XEMBED plug interface and output a window XID on the standard "
-"output."
-msgstr ""
-"Naredba koja će se pokrenuti za umetanje virtualne tipkovnice u prozor, ako "
-"je \"embedded_keyboard_enabled\" namješten na ISTINITO. Ova naredba bi "
-"trebala implementirati XEMBED utično sučelje i davati XID prozora na izlazu."
-
-#: ../data/gnome-screensaver.schemas.in.h:17
-msgid ""
-"The command to invoke when the logout button is clicked. This command should "
-"simply log the user out without any interaction. This key has effect only if "
-"the \"logout_enable\" key is set to TRUE."
-msgstr ""
-"Naredba koja će se pozvati prilikom klika na odjavnu tipku. Ova naredba "
-"jednostavno treba odjaviti korisnika bez ikakve interakcije. Ova tipka ima "
-"utjecaja samo ako je postavljena tipka \"odjava_omogućeno\"."
-
-#: ../data/gnome-screensaver.schemas.in.h:18
-msgid ""
-"The number of minutes after screensaver activation before locking the screen."
-msgstr ""
-"Broj minuta potreban da se zaslon zaključa nakon pokretanja čuvara zaslona."
-
-#: ../data/gnome-screensaver.schemas.in.h:19
-msgid ""
-"The number of minutes after the screensaver activation before a logout "
-"option will appear in unlock dialog. This key has effect only if the "
-"\"logout_enable\" key is set to TRUE."
-msgstr ""
-"Broj minuta nakon pokretanja čuvara zaslona prije nego što će se pojaviti "
-"opcija za odjavu korisnika. Ovaj ključ se koristi samo ako je ključ "
-"\"logout_enable\" postavljen na istinito."
-
-#: ../data/gnome-screensaver.schemas.in.h:20
-msgid ""
-"The number of minutes of inactivity before the session is considered idle."
-msgstr ""
-"Broj minuta neaktivnosti potrebnih prije nego se prijava proglasi neaktivnom."
-
-#: ../data/gnome-screensaver.schemas.in.h:21
-msgid "The number of minutes to run before changing the screensaver theme."
-msgstr ""
-"Broj minuta rada čuvara zaslona potrebnih prije mjenjanja njegove teme."
-
-#: ../data/gnome-screensaver.schemas.in.h:22
-msgid ""
-"The number of seconds of inactivity before signalling to power-management. "
-"This key is set and maintained by the session power-management agent."
-msgstr ""
-"Broj sekundi neaktivnosti prije nego što se obavijesti upravljača energijom. "
-"Ovu postavku namješta i održava agent upravljanja energijom."
-
-#: ../data/gnome-screensaver.schemas.in.h:23
-msgid "The reason for being away from the computer."
-msgstr "Razlog odsutnosti od računala."
-
-#: ../data/gnome-screensaver.schemas.in.h:24
-msgid ""
-"The selection mode used by screensaver. May be \"blank-only\" to enable the "
-"screensaver without using any theme on activation, \"single\" to enable "
-"screensaver using only one theme on activation (specified in \"themes\" "
-"key), and \"random\" to enable the screensaver using a random theme on "
-"activation."
-msgstr ""
-"Odabir stanja čuvara zaslona. Može biti \"zatamnjeno\", time čuvar zaslona "
-"radi bez tema, \"jedan\" radi samo sa jednom temom (odabranom \"tema\" "
-"tipkom), i \"nasumičan\" radi sa nasumičnim odabirom tema."
-
-#: ../data/gnome-screensaver.schemas.in.h:25
-msgid "Theme for lock dialog"
-msgstr "Tema za dijalog zaključavanja"
-
-#: ../data/gnome-screensaver.schemas.in.h:26
-msgid "Theme to use for the lock dialog."
-msgstr "Tema koja će se koristiti za dijalog zaključavanja"
-
-#: ../data/gnome-screensaver.schemas.in.h:27
-msgid ""
-"This key specifies the list of themes to be used by the screensaver. It's "
-"ignored when \"mode\" key is \"blank-only\", should provide the theme name "
-"when \"mode\" is \"single\", and should provide a list of themes when \"mode"
-"\" is \"random\"."
-msgstr ""
-"Ovaj ključ precizira listu tema čuvara zaslona. Zanemaren je kada je ključ "
-"\"mode\" \"blank-only\", no kada je \"mode\" \"single\" prikazat će ime "
-"teme, te listu tema kada je \"mode\" \"random\"."
-
-#: ../data/gnome-screensaver.schemas.in.h:28
-msgid "Time before locking"
-msgstr "Vrijeme potrebno prije zaključavanja"
-
-#: ../data/gnome-screensaver.schemas.in.h:29
-msgid "Time before logout option"
-msgstr "Vrijeme potrebno prije odjavne opcije"
-
-#: ../data/gnome-screensaver.schemas.in.h:30
-msgid "Time before power-management baseline"
-msgstr "Vrijeme potrebno prije nulte linije upravljanja energijom"
-
-#: ../data/gnome-screensaver.schemas.in.h:31
-msgid "Time before session is considered idle"
-msgstr "Vrijeme potrebno da se utvrdi mirovanje prijave"
-
-#: ../data/gnome-screensaver.schemas.in.h:32
-msgid "Time before theme change"
-msgstr "Vrijeme potrebno prije promjene teme"
-
-#: ../data/lock-dialog-default.glade.h:2
-#, no-c-format
-msgid "<b>Leave a message for %R:</b>"
-msgstr "<b>Ostaviti poruku za %R:</b>"
-
-#: ../data/lock-dialog-default.glade.h:4
-#, no-c-format
-msgid "<span size=\"small\">%U on %h</span>"
-msgstr "<span size=\"small\">%U na %h</span>"
-
-#: ../data/lock-dialog-default.glade.h:6
-#, no-c-format
-msgid "<span size=\"x-large\">%R</span>"
-msgstr "<span size=\"x-large\">%R</span>"
-
-#: ../data/lock-dialog-default.glade.h:7
-msgid "_Cancel"
-msgstr "_Odustani"
-
-#: ../data/lock-dialog-default.glade.h:8
-msgid "_Leave Message"
-msgstr "_Ostavi poruku"
-
-#: ../data/lock-dialog-default.glade.h:9
-msgid "_Log Out"
-msgstr "_Odjava"
-
-#: ../data/lock-dialog-default.glade.h:10
-msgid "_Switch User"
-msgstr "_Zamijeni korisnika"
-
-#: ../data/lock-dialog-default.glade.h:11 ../src/gs-lock-plug.c:1366
-msgid "_Unlock"
-msgstr "_Otključaj"
-
-#: ../savers/cosmos-slideshow.desktop.in.in.h:1
-msgid "Cosmos"
-msgstr "Svemir"
-
-#: ../savers/cosmos-slideshow.desktop.in.in.h:2
-msgid "Display a slideshow of pictures of the cosmos"
-msgstr "Prikaži niz slika svemira"
-
-#: ../savers/footlogo-floaters.desktop.in.in.h:1
-msgid "Bubbles the GNOME foot logo around the screen"
-msgstr "Prikazuje GNOME logo u mjehurićima preko zaslona"
-
-#: ../savers/footlogo-floaters.desktop.in.in.h:2
-msgid "Floating Feet"
-msgstr "Lebdeće noge"
-
-#: ../savers/personal-slideshow.desktop.in.h:1
-msgid "Display a slideshow from your Pictures folder"
-msgstr "Prikaži niz slika iz mape Slike"
-
-#: ../savers/personal-slideshow.desktop.in.h:2
-msgid "Pictures folder"
-msgstr "mapa Slike"
-
-#: ../savers/popsquares.desktop.in.h:1
-msgid "A pop-art-ish grid of pulsing colors."
-msgstr "Pop umjetnička mreža pulsirajućih boja."
-
-#: ../savers/popsquares.desktop.in.h:2
-msgid "Pop art squares"
-msgstr "Pop umjetnički kvadrati"
-
-#: ../savers/floaters.c:84
-msgid "Show paths that images follow"
-msgstr ""
-
-#: ../savers/floaters.c:87
-msgid "Occasionally rotate images as they move"
-msgstr "Povremeno rotiranje slika dok se pomiču"
-
-#: ../savers/floaters.c:90
-msgid "Print out frame rate and other statistics"
-msgstr "Ispis broja slika u sekundi i drugih statistika"
-
-#: ../savers/floaters.c:93
-msgid "The maximum number of images to keep on screen"
-msgstr "Najveći broj slika koje će se zadržatii na ekranu"
-
-#: ../savers/floaters.c:93
-msgid "MAX_IMAGES"
-msgstr "MAX_SLIKE"
-
-#: ../savers/floaters.c:96
-msgid "The initial size and position of window"
-msgstr "Početna veličina i položaj prozora"
-
-#: ../savers/floaters.c:96
-msgid "WIDTHxHEIGHT+X+Y"
-msgstr "ŠIRINAxVISINA+X+Y"
-
-#: ../savers/floaters.c:99
-msgid "The source image to use"
-msgstr "Izvorna slika"
-
-#. translators: the word "image" here
-#. * represents a command line argument
-#.
-#: ../savers/floaters.c:1194
-msgid "image - floats images around the screen"
-msgstr "image - lebdeće slike oko zaslona"
-
-#: ../savers/floaters.c:1200
-#, c-format
-msgid "%s. See --help for usage information.\n"
-msgstr "%s. Vidi --help za informacije o korištenju.\n"
-
-#: ../savers/floaters.c:1209
-msgid "You must specify one image. See --help for usage information.\n"
-msgstr "Morate navesti jednu sliku. Vidi --help za informacije o korištenju.\n"
-
-#: ../savers/slideshow.c:53
-msgid "Location to get images from"
-msgstr "Mjesto s kojeg želite slike"
-
-#: ../savers/slideshow.c:53
-msgid "PATH"
-msgstr "PATH"
-
-#: ../savers/slideshow.c:55
-msgid "Color to use for images background"
-msgstr "Boja pozadine za slike"
-
-#: ../savers/slideshow.c:55
-msgid "\"#rrggbb\""
-msgstr "\"#rrggbb\""
-
-#: ../savers/slideshow.c:57
-msgid "Do not randomize pictures from location"
-msgstr ""
-
-#: ../savers/slideshow.c:59
-msgid "Do not try to stretch images on screen"
-msgstr "Ne pokušavaj rastegnuti slike na ekranu"
-
-#: ../src/copy-theme-dialog.c:212
-msgid "Copying files"
-msgstr "Kopiram datoteke"
-
-#: ../src/copy-theme-dialog.c:230
-msgid "From:"
-msgstr "Od:"
-
-#: ../src/copy-theme-dialog.c:234
-msgid "To:"
-msgstr "Za:"
-
-#: ../src/copy-theme-dialog.c:254
-msgid "Copying themes"
-msgstr ""
-
-#: ../src/copy-theme-dialog.c:298
-msgid "Invalid screensaver theme"
-msgstr "Neispravna tema čuvara zaslona"
-
-#: ../src/copy-theme-dialog.c:301
-#, c-format
-msgid "%s does not appear to be a valid screensaver theme."
-msgstr ""
-
-#: ../src/copy-theme-dialog.c:481
-#, c-format
-msgid "Copying file: %u of %u"
-msgstr "Kopiram datoteku: %u od %u"
-
-#: ../src/gnome-screensaver-command.c:62
+#: ../src/gnome-screensaver-command.c:46
msgid "Causes the screensaver to exit gracefully"
msgstr "Uzrokuje pravilan izlazak iz čuvara zaslona"
-#: ../src/gnome-screensaver-command.c:64
+#: ../src/gnome-screensaver-command.c:48
msgid "Query the state of the screensaver"
msgstr "Ispitaj stanje čuvara zaslona"
-#: ../src/gnome-screensaver-command.c:66
+#: ../src/gnome-screensaver-command.c:50
msgid "Query the length of time the screensaver has been active"
msgstr "Određivanje duljine trajanja čuvara zaslona"
-#: ../src/gnome-screensaver-command.c:68
+#: ../src/gnome-screensaver-command.c:52
msgid "Tells the running screensaver process to lock the screen immediately"
msgstr "Govori pokrenutom procesu čuvara zaslona da odmah zaključa zaslon"
-#: ../src/gnome-screensaver-command.c:70
-msgid "If the screensaver is active then switch to another graphics demo"
-msgstr "Ako je čuvar zaslona aktivan prebaci na drugu animaciju"
-
-#: ../src/gnome-screensaver-command.c:72
+#: ../src/gnome-screensaver-command.c:54
msgid "Turn the screensaver on (blank the screen)"
-msgstr "Pokreni čuvar zaslona (zatamni zaslon)"
+msgstr "Pokreni čuvara zaslona (zatamni zaslon)"
-#: ../src/gnome-screensaver-command.c:74
+#: ../src/gnome-screensaver-command.c:56
msgid "If the screensaver is active then deactivate it (un-blank the screen)"
-msgstr "Ako je čuvar zaslona aktivan, deaktiviraj ga (obnovi sliku na zaslonu)"
-
-#: ../src/gnome-screensaver-command.c:76
-msgid "Poke the running screensaver to simulate user activity"
-msgstr "Navedi čuvara zaslona da misli da je korisnik aktivan"
-
-#: ../src/gnome-screensaver-command.c:78
-msgid ""
-"Inhibit the screensaver from activating. Command blocks while inhibit is "
-"active."
msgstr ""
-"Spriječavanje aktiviranja čuvara zaslona. Naredba blokira dok je zabrana "
-"aktivna."
-
-#: ../src/gnome-screensaver-command.c:80
-msgid "The calling application that is inhibiting the screensaver"
-msgstr "Pozivni program koji spriječava čuvara zaslona"
-
-#: ../src/gnome-screensaver-command.c:82
-msgid "The reason for inhibiting the screensaver"
-msgstr "Razlog spriječavanja čuvara zaslona"
+"Ako je čuvar zaslona aktivan, deaktiviraj ga (obnovi sliku na zaslonu)"
-#: ../src/gnome-screensaver-command.c:84 ../src/gnome-screensaver-dialog.c:57
+#: ../src/gnome-screensaver-command.c:58 ../src/gnome-screensaver-dialog.c:59
#: ../src/gnome-screensaver.c:56
msgid "Version of this application"
-msgstr "Verzija ovog programa"
+msgstr "Inačica ovog programa"
-#: ../src/gnome-screensaver-command.c:307
+#: ../src/gnome-screensaver-command.c:224
#, c-format
-msgid "The screensaver is %s\n"
-msgstr "Čuvar zaslona je %s\n"
+msgid "The screensaver is active\n"
+msgstr "Čuvar zaslona je aktivan\n"
-#: ../src/gnome-screensaver-command.c:307
-msgid "active"
-msgstr "aktivan"
-
-#: ../src/gnome-screensaver-command.c:307
-msgid "inactive"
-msgstr "neaktivan"
-
-#: ../src/gnome-screensaver-command.c:321
-#, fuzzy
-msgid "The screensaver is not inhibited\n"
-msgstr "Čuvar zaslona je %s\n"
+#: ../src/gnome-screensaver-command.c:226
+#, c-format
+msgid "The screensaver is inactive\n"
+msgstr "Čuvar zaslona je neaktivan\n"
-#: ../src/gnome-screensaver-command.c:327
-#, fuzzy
-msgid "The screensaver is being inhibited by:\n"
-msgstr "Čuvar zaslona je %s\n"
+#: ../src/gnome-screensaver-command.c:256
+#, c-format
+msgid "The screensaver has been active for %d second.\n"
+msgid_plural "The screensaver has been active for %d seconds.\n"
+msgstr[0] "Čuvar zaslona je bio aktivan %d sekundu.\n"
+msgstr[1] "Čuvar zaslona je bio aktivan %d sekunde.\n"
+msgstr[2] "Čuvar zaslona je bio aktivan %d sekundi.\n"
-#: ../src/gnome-screensaver-command.c:358
+#: ../src/gnome-screensaver-command.c:258
#, c-format
-msgid "The screensaver has been active for %d seconds.\n"
-msgstr "Čuvar zaslona je aktivan %d sekundi.\n"
+msgid "The screensaver is not currently active.\n"
+msgstr "Čuvar zaslona trenutno nije aktivan.\n"
-#: ../src/gnome-screensaver-dialog.c:55
+#: ../src/gnome-screensaver-dialog.c:57
msgid "Show debugging output"
msgstr "Prikaži detaljni ispis rada"
-#: ../src/gnome-screensaver-dialog.c:59
+#: ../src/gnome-screensaver-dialog.c:61
msgid "Show the logout button"
msgstr "Prikaži odjavnu tipku"
-#: ../src/gnome-screensaver-dialog.c:61
+#: ../src/gnome-screensaver-dialog.c:63
msgid "Command to invoke from the logout button"
msgstr "Naredba za pozivanje pritiskom na odjavnu tipku"
-#: ../src/gnome-screensaver-dialog.c:63
+#: ../src/gnome-screensaver-dialog.c:65
msgid "Show the switch user button"
msgstr "Prikaži tipku za promjenu korisnika"
-#: ../src/gnome-screensaver-dialog.c:65
+#: ../src/gnome-screensaver-dialog.c:67
msgid "Message to show in the dialog"
msgstr "Poruka koju treba prikazati u dialogu"
-#: ../src/gnome-screensaver-dialog.c:65
+#. Translators: This is the example input for the --status-message command line option.
+#. Translators: This is the example input for the --away-message command line option.
+#: ../src/gnome-screensaver-dialog.c:69 ../src/gnome-screensaver-dialog.c:73
msgid "MESSAGE"
msgstr "PORUKA"
+#: ../src/gnome-screensaver-dialog.c:71
+msgid "Not used"
+msgstr "Nije korišten"
+
#. login: is whacked always translate to Username:
-#: ../src/gnome-screensaver-dialog.c:175 ../src/gnome-screensaver-dialog.c:176
-#: ../src/gnome-screensaver-dialog.c:177 ../src/gs-auth-pam.c:698
+#: ../src/gnome-screensaver-dialog.c:183 ../src/gnome-screensaver-dialog.c:184
+#: ../src/gnome-screensaver-dialog.c:185 ../src/gs-auth-pam.c:706
msgid "Username:"
msgstr "Korisničko ime:"
-#: ../src/gnome-screensaver-dialog.c:178 ../src/gnome-screensaver-dialog.c:179
+#: ../src/gnome-screensaver-dialog.c:186 ../src/gnome-screensaver-dialog.c:187
#: ../src/gs-auth-pam.c:166
msgid "Password:"
msgstr "Lozinka:"
-#: ../src/gnome-screensaver-dialog.c:180
+#: ../src/gnome-screensaver-dialog.c:188
msgid "You are required to change your password immediately (password aged)"
msgstr "Morate odmah promijeniti lozinku (zastarjela lozinka)"
-#: ../src/gnome-screensaver-dialog.c:181
+#: ../src/gnome-screensaver-dialog.c:189
msgid "You are required to change your password immediately (root enforced)"
msgstr "Morate odmah promijeniti lozinku (administrator je naredio)"
-#: ../src/gnome-screensaver-dialog.c:182
+#: ../src/gnome-screensaver-dialog.c:190
msgid "Your account has expired; please contact your system administrator"
msgstr ""
"Vaš korisnički račun je istekao; molim kontaktirajte administratora sustava"
-#: ../src/gnome-screensaver-dialog.c:183
+#: ../src/gnome-screensaver-dialog.c:191
msgid "No password supplied"
msgstr "Lozinka nije unešena"
-#: ../src/gnome-screensaver-dialog.c:184
+#: ../src/gnome-screensaver-dialog.c:192
msgid "Password unchanged"
msgstr "Lozinka nepromijenjena"
-#: ../src/gnome-screensaver-dialog.c:185
-msgid "Can not get username"
-msgstr "Ne mogu saznati korisničko ime"
+#: ../src/gnome-screensaver-dialog.c:193
+msgid "Cannot get username"
+msgstr "Nije moguće dobiti korisničko ime"
-#: ../src/gnome-screensaver-dialog.c:186
-msgid "Retype new UNIX password:"
-msgstr "Ponovno upišite UNIX lozinku:"
+#: ../src/gnome-screensaver-dialog.c:194
+msgid "Retype new Unix password:"
+msgstr "Ponovno upišite Unix lozinku:"
-#: ../src/gnome-screensaver-dialog.c:187
-msgid "Enter new UNIX password:"
-msgstr "Upišite novu UNIX lozinku:"
+#: ../src/gnome-screensaver-dialog.c:195
+msgid "Enter new Unix password:"
+msgstr "Upišite novu Unix lozinku:"
-#: ../src/gnome-screensaver-dialog.c:188
-msgid "(current) UNIX password:"
-msgstr "(trenutna) UNIX lozinka:"
+#: ../src/gnome-screensaver-dialog.c:196
+msgid "(current) Unix password:"
+msgstr "(trenutna) Unix lozinka:"
-#: ../src/gnome-screensaver-dialog.c:189
+#: ../src/gnome-screensaver-dialog.c:197
msgid "Error while changing NIS password."
msgstr "Greška pri promjeni NIS lozinke."
-#: ../src/gnome-screensaver-dialog.c:190
+#: ../src/gnome-screensaver-dialog.c:198
msgid "You must choose a longer password"
msgstr "Morate odabrati dužu lozinku"
-#: ../src/gnome-screensaver-dialog.c:191
+#: ../src/gnome-screensaver-dialog.c:199
msgid "Password has been already used. Choose another."
msgstr "Lozinka je već korištena. Odaberite neku drugu."
-#: ../src/gnome-screensaver-dialog.c:192
+#: ../src/gnome-screensaver-dialog.c:200
msgid "You must wait longer to change your password"
msgstr "Morate pričekati nešto duže za promijenu lozinke"
-#: ../src/gnome-screensaver-dialog.c:193
+#: ../src/gnome-screensaver-dialog.c:201
msgid "Sorry, passwords do not match"
msgstr "Na žalost, lozinke se ne podudaraju"
-#: ../src/gnome-screensaver-dialog.c:259
-msgid "Checking..."
-msgstr "Provjeravanje..."
+#: ../src/gnome-screensaver-dialog.c:267
+msgid "Checking…"
+msgstr "Provjera..."
-#: ../src/gnome-screensaver-dialog.c:301 ../src/gs-auth-pam.c:457
+#: ../src/gnome-screensaver-dialog.c:309 ../src/gs-auth-pam.c:457
msgid "Authentication failed."
msgstr "Autentikacija nije uspjela."
-#: ../src/gnome-screensaver-preferences.c:515
-msgid "Blank screen"
-msgstr "Zatamni zaslon"
-
-#: ../src/gnome-screensaver-preferences.c:521
-msgid "Random"
-msgstr "Nasumično"
-
-#: ../src/gnome-screensaver-preferences.c:971
-#, c-format
-msgid "%d hour"
-msgid_plural "%d hours"
-msgstr[0] "%d sat"
-msgstr[1] "%d sata"
-msgstr[2] "%d sati"
-
-#: ../src/gnome-screensaver-preferences.c:974
-#, c-format
-msgid "%d minute"
-msgid_plural "%d minutes"
-msgstr[0] "%d minute"
-msgstr[1] "%d minute"
-msgstr[2] "%d minuta"
-
-#: ../src/gnome-screensaver-preferences.c:977
-#, c-format
-msgid "%d second"
-msgid_plural "%d seconds"
-msgstr[0] "%d sekunda"
-msgstr[1] "%d sekunde"
-msgstr[2] "%d sekundi"
-
-#. hour:minutes:seconds
-#: ../src/gnome-screensaver-preferences.c:983
-#, c-format
-msgid "%s %s %s"
-msgstr "%s %s %s"
-
-#. hour:minutes
-#. minutes:seconds
-#: ../src/gnome-screensaver-preferences.c:986
-#: ../src/gnome-screensaver-preferences.c:994
-#, c-format
-msgid "%s %s"
-msgstr "%s %s"
-
-#. hour
-#. minutes
-#. seconds
-#: ../src/gnome-screensaver-preferences.c:989
-#: ../src/gnome-screensaver-preferences.c:997
-#: ../src/gnome-screensaver-preferences.c:1001
-#, c-format
-msgid "%s"
-msgstr "%s"
-
-#: ../src/gnome-screensaver-preferences.c:1016
-msgid "Never"
-msgstr "Nikad"
-
-#: ../src/gnome-screensaver-preferences.c:1443
-msgid "Could not load the main interface"
-msgstr "Ne mogu učitati glavno sučelje"
-
-#: ../src/gnome-screensaver-preferences.c:1445
-msgid "Please make sure that the screensaver is properly installed"
-msgstr "Provjerite je li čuvar zaslona pravilno instaliran"
-
#: ../src/gnome-screensaver.c:57
msgid "Don't become a daemon"
msgstr "Nemoj radit u pozadini"
@@ -684,6 +186,14 @@ msgstr "Nemoj radit u pozadini"
msgid "Enable debugging code"
msgstr "Omogući pronalaženje grešaka u programu"
+#: ../src/gnome-screensaver.desktop.in.in.h:1
+msgid "Screensaver"
+msgstr "Čuvar zaslona"
+
+#: ../src/gnome-screensaver.desktop.in.in.h:2
+msgid "Launch screensaver and locker program"
+msgstr "Pokreni čuvara zaslona i program zaključavanja"
+
#: ../src/gs-auth-pam.c:397
#, c-format
msgid "Unable to establish service %s: %s\n"
@@ -706,39 +216,38 @@ msgstr "Trenutno nemate dopuštenje ulaza."
msgid "No longer permitted to access the system."
msgstr "Nemate dopuštenje ulaza u sustav."
-#: ../src/gs-listener-dbus.c:1921
+#: ../src/gs-listener-dbus.c:1325
msgid "failed to register with the message bus"
msgstr "ne mogu se registrirati na sabirnicu poruka"
-#: ../src/gs-listener-dbus.c:1931
+#: ../src/gs-listener-dbus.c:1335
msgid "not connected to the message bus"
msgstr "nisam spojen sa sabirnicom poruka"
-#: ../src/gs-listener-dbus.c:1940
+#: ../src/gs-listener-dbus.c:1343 ../src/gs-listener-dbus.c:1373
msgid "screensaver already running in this session"
msgstr "čuvar zaslona već pokrenut u ovoj prijavi"
-#: ../src/gs-lock-plug.c:271
+#: ../src/gs-lock-plug.c:294
msgid "Time has expired."
msgstr "Vrijeme je isteklo."
-#: ../src/gs-lock-plug.c:299
+#: ../src/gs-lock-plug.c:325
msgid "You have the Caps Lock key on."
msgstr "Uključena vam je Caps Lock tipka."
-#: ../src/gs-lock-plug.c:1346
-msgid "S_witch User..."
-msgstr "Pro_mjena korisnika..."
+#: ../src/gs-lock-plug.c:1398
+msgid "S_witch User…"
+msgstr "_Zamjena korisnika…"
-#: ../src/gs-lock-plug.c:1355
+#: ../src/gs-lock-plug.c:1407
msgid "Log _Out"
msgstr "_Odjava"
-#. To translators: This expands to USERNAME on HOSTNAME
-#: ../src/gs-lock-plug.c:1532
-msgid "%U on %h"
-msgstr "%U na %h"
+#: ../src/gs-lock-plug.c:1414
+msgid "_Unlock"
+msgstr "_Otključaj"
-#: ../src/gs-lock-plug.c:1546
+#: ../src/gs-lock-plug.c:1622 ../src/gs-lock-plug.c:1672
msgid "_Password:"
msgstr "_Lozinka:"
diff --git a/po/kn.po b/po/kn.po
index 4e8935d..5eb9ba7 100644
--- a/po/kn.po
+++ b/po/kn.po
@@ -8,44 +8,43 @@ msgstr ""
"Project-Id-Version: gnome-screensaver.master.kn\n"
"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-"
"screensaver&keywords=I18N+L10N&component=general\n"
-"POT-Creation-Date: 2012-03-30 22:23+0000\n"
-"PO-Revision-Date: 2012-09-26 15:54+0530\n"
+"POT-Creation-Date: 2012-11-28 14:33+0000\n"
+"PO-Revision-Date: 2012-11-30 15:33+0530\n"
"Last-Translator: Shankar Prasad <svenkate@redhat.com>\n"
"Language-Team: Kannada <en@li.org>\n"
+"Language: kn\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Lokalize 1.2\n"
-"Language: kn\n"
+"X-Generator: Lokalize 1.5\n"
#: ../src/gnome-screensaver-command.c:46
msgid "Causes the screensaver to exit gracefully"
-msgstr "ಸ್ಕ್ರೀನ್ಸೇವರ್ ಅನ್ನು ಆಕರ್ಷಕವಾಗಿ ನಿರ್ಗಮಿಸುವಂತೆ ಮಾಡುತ್ತದೆ"
+msgstr "ರಕ್ಷಣಾತೆರೆಯನ್ನು ಆಕರ್ಷಕವಾಗಿ ನಿರ್ಗಮಿಸುವಂತೆ ಮಾಡುತ್ತದೆ"
#: ../src/gnome-screensaver-command.c:48
msgid "Query the state of the screensaver"
-msgstr "ಸ್ಕ್ರೀನ್ಸೇವರಿನ ಸ್ಥಿತಿಗಾಗಿ ಮನವಿ ಸಲ್ಲಿಸಿ"
+msgstr "ರಕ್ಷಣಾತೆರೆ (ಸ್ಕ್ರೀನ್ಸೇವರ್) ಸ್ಥಿತಿಗಾಗಿ ಮನವಿ ಸಲ್ಲಿಸಿ"
#: ../src/gnome-screensaver-command.c:50
msgid "Query the length of time the screensaver has been active"
-msgstr "ಸ್ಕ್ರೀನ್ಸೇವರ್ ಸಕ್ರಿಯವಾಗಿರಬೇಕಿರುವ ಸಮಯಕ್ಕಾಗಿ ಮನವಿಸಲ್ಲಿಸಿ"
+msgstr "ರಕ್ಷಣಾತೆರೆ ಸಕ್ರಿಯವಾಗಿರಬೇಕಿರುವ ಸಮಯಕ್ಕಾಗಿ ಮನವಿಸಲ್ಲಿಸಿ"
#: ../src/gnome-screensaver-command.c:52
msgid "Tells the running screensaver process to lock the screen immediately"
msgstr ""
-"ಚಾಲನೆಯಲ್ಲಿರುವ ಸ್ಕ್ರೀನ್ಸೇವರ್ ಪ್ರಕ್ರಿಯೆಗೆ ತಕ್ಷಣವೆ ತೆರೆಯನ್ನು ಲಾಕ್ ಮಾಡುವಂತೆ "
+"ಚಾಲನೆಯಲ್ಲಿರುವ ರಕ್ಷಣಾತೆರೆ ಪ್ರಕ್ರಿಯೆಗೆ ತಕ್ಷಣವೆ ತೆರೆಯನ್ನು ಲಾಕ್ ಮಾಡುವಂತೆ "
"ತಿಳಿಸುತ್ತದೆ"
#: ../src/gnome-screensaver-command.c:54
msgid "Turn the screensaver on (blank the screen)"
-msgstr "ಸ್ಕ್ರೀನ್ಸೇವರ್ ಅನ್ನು ಆನ್ ಮಾಡು (ತೆರೆಯನ್ನು ಖಾಲಿಯಾಗಿ ಇರಿಸು)"
+msgstr "ರಕ್ಷಣಾತೆರೆಯನ್ನು ಆನ್ ಮಾಡು (ತೆರೆಯನ್ನು ಖಾಲಿಯಾಗಿ ಇರಿಸು)"
#: ../src/gnome-screensaver-command.c:56
msgid "If the screensaver is active then deactivate it (un-blank the screen)"
msgstr ""
-"ಸ್ಕ್ರೀನ್ಸೇವರ್ ಸಕ್ರಿಯವಾಗಿದ್ದರೆ ಅದನ್ನು ನಿಷ್ಕ್ರಿಯಗೊಳಿಸು (ತೆರೆಯನ್ನು ಖಾಲಿಯಾಗಿ "
-"ಇರಿಸಬೇಡ)"
+"ರಕ್ಷಣಾತೆರೆ ಸಕ್ರಿಯವಾಗಿದ್ದರೆ ಅದನ್ನು ನಿಷ್ಕ್ರಿಯಗೊಳಿಸು (ತೆರೆಯನ್ನು ಖಾಲಿಯಾಗಿ ಇರಿಸಬೇಡ)"
#: ../src/gnome-screensaver-command.c:58 ../src/gnome-screensaver-dialog.c:59
#: ../src/gnome-screensaver.c:56
@@ -53,29 +52,29 @@ msgid "Version of this application"
msgstr "ಈ ಅನ್ವಯದ ಆವೃತ್ತಿ"
#: ../src/gnome-screensaver-command.c:224
-#, fuzzy, c-format
+#, c-format
#| msgid "The screensaver is %s\n"
msgid "The screensaver is active\n"
-msgstr "ಸ್ಕ್ರೀನ್ಸೇವರ್ %s ಆಗಿದೆ\n"
+msgstr "ರಕ್ಷಣಾತೆರೆಯು ಸಕ್ರಿಯವಾಗಿದೆ\n"
#: ../src/gnome-screensaver-command.c:226
-#, fuzzy, c-format
+#, c-format
#| msgid "The screensaver is %s\n"
msgid "The screensaver is inactive\n"
-msgstr "ಸ್ಕ್ರೀನ್ಸೇವರ್ %s ಆಗಿದೆ\n"
+msgstr "ರಕ್ಷಣಾತೆರೆಯು ನಿಷ್ಕ್ರಿಯವಾಗಿದೆ\n"
#: ../src/gnome-screensaver-command.c:256
-#, fuzzy, c-format
+#, c-format
#| msgid "The screensaver has been active for %d seconds.\n"
msgid "The screensaver has been active for %d second.\n"
msgid_plural "The screensaver has been active for %d seconds.\n"
-msgstr[0] "ಸ್ಕ್ರೀನ್ಸೇವರ್ %d ಸೆಕೆಂಡುಗಳ ಕಾಲ ಸಕ್ರಿಯವಾಗಿತ್ತು.\n"
-msgstr[1] "ಸ್ಕ್ರೀನ್ಸೇವರ್ %d ಸೆಕೆಂಡುಗಳ ಕಾಲ ಸಕ್ರಿಯವಾಗಿತ್ತು.\n"
+msgstr[0] "ರಕ್ಷಣಾತೆರೆ %d ಸೆಕೆಂಡಿನ ಕಾಲ ಸಕ್ರಿಯವಾಗಿದೆ.\n"
+msgstr[1] "ರಕ್ಷಣಾತೆರೆ %d ಸೆಕೆಂಡುಗಳ ಕಾಲ ಸಕ್ರಿಯವಾಗಿದೆ.\n"
#: ../src/gnome-screensaver-command.c:258
#, c-format
msgid "The screensaver is not currently active.\n"
-msgstr "ಸ್ಕ್ರೀನ್ಸೇವರ್ ಪ್ರಸಕ್ತ ಸಕ್ರಿಯವಾಗಿಲ್ಲ.\n"
+msgstr "ರಕ್ಷಣಾತೆರೆ ಪ್ರಸಕ್ತ ಸಕ್ರಿಯವಾಗಿಲ್ಲ.\n"
#: ../src/gnome-screensaver-dialog.c:57
msgid "Show debugging output"
@@ -141,25 +140,21 @@ msgid "Password unchanged"
msgstr "ಗುಪ್ತಪದವನ್ನು ಬದಲಾಯಿಸಲಾಗಿಲ್ಲ"
#: ../src/gnome-screensaver-dialog.c:193
-#, fuzzy
#| msgid "Can not get username"
msgid "Cannot get username"
msgstr "ಬಳಕೆದಾರ ಹೆಸರನ್ನು ಪಡೆಯಲಾಗಿಲ್ಲ"
#: ../src/gnome-screensaver-dialog.c:194
-#, fuzzy
#| msgid "Retype new UNIX password:"
msgid "Retype new Unix password:"
msgstr "ಹೊಸ UNIX ಗುಪ್ತಪದವನ್ನು ಇನ್ನೊಮ್ಮೆ ನಮೂದಿಸಿ:"
#: ../src/gnome-screensaver-dialog.c:195
-#, fuzzy
#| msgid "Enter new UNIX password:"
msgid "Enter new Unix password:"
msgstr "ಹೊಸ UNIX ಗುಪ್ತಪದವನ್ನು ನಮೂದಿಸಿ:"
#: ../src/gnome-screensaver-dialog.c:196
-#, fuzzy
#| msgid "(current) UNIX password:"
msgid "(current) Unix password:"
msgstr "(ಪ್ರಸಕ್ತ) UNIX ಗುಪ್ತಪದ:"
@@ -185,7 +180,6 @@ msgid "Sorry, passwords do not match"
msgstr "ಕ್ಷಮಿಸಿ, ಗುಪ್ತಪದಗಳು ತಾಳೆಯಾಗುವುದಿಲ್ಲ"
#: ../src/gnome-screensaver-dialog.c:267
-#| msgid "Checking..."
msgid "Checking…"
msgstr "ಪರಿಶೀಲಿಸಲಾಗುತ್ತಿದೆ..."
@@ -203,13 +197,12 @@ msgstr "ದೋಷನಿವಾರಣಾ ಸಂಜ್ಞೆಯನ್ನು ಶಕ
#: ../src/gnome-screensaver.desktop.in.in.h:1
msgid "Screensaver"
-msgstr "ಸ್ಕ್ರೀನ್ಸೇವರ್"
+msgstr "ರಕ್ಷಣಾತೆರೆ (ಸ್ಕ್ರೀನ್ಸೇವರ್)"
#: ../src/gnome-screensaver.desktop.in.in.h:2
-#, fuzzy
#| msgid "Launch screen saver and locker program"
msgid "Launch screensaver and locker program"
-msgstr "ಸ್ಕ್ರೀನ್ ಸೇವರ್ ಹಾಗು ಲಾಕ್ ಮಾಡುವ ಪ್ರೊಗ್ರಾಮ್ ಅನ್ನು ಆರಂಭಿಸಿ"
+msgstr "ರಕ್ಷಣಾತೆರೆ ಹಾಗು ಲಾಕ್ ಮಾಡುವ ಪ್ರೊಗ್ರಾಮ್ ಅನ್ನು ಆರಂಭಿಸಿ"
#: ../src/gs-auth-pam.c:397
#, c-format
@@ -243,7 +236,7 @@ msgstr "ಸಂದೇಶ ಬಸ್ಗೆ ಸಂಪರ್ಕಿತಗೊಂಡ
#: ../src/gs-listener-dbus.c:1304 ../src/gs-listener-dbus.c:1334
msgid "screensaver already running in this session"
-msgstr "ಸ್ಕ್ರೀನ್ಸೇವರ್ ಈಗಾಗಲೆ ಈ ಅಧಿವೇಶನದಲ್ಲಿ ಚಾಲನೆಯಲ್ಲಿದೆ"
+msgstr "ರಕ್ಷಣಾತೆರೆ ಈಗಾಗಲೆ ಈ ಅಧಿವೇಶನದಲ್ಲಿ ಚಾಲನೆಯಲ್ಲಿದೆ"
#: ../src/gs-lock-plug.c:255
msgid "Time has expired."
@@ -253,21 +246,20 @@ msgstr "ಕಾಲಾವಧಿ ಮುಗಿದಿದೆ."
msgid "You have the Caps Lock key on."
msgstr "ನಿಮ್ಮ Caps Lock ಕೀಲಿಯು ಆನ್ ಆಗಿದೆ."
-#: ../src/gs-lock-plug.c:1353
-#, fuzzy
+#: ../src/gs-lock-plug.c:1350
#| msgid "_Switch User"
msgid "S_witch User…"
-msgstr "ಬಳಕೆದಾರನನ್ನು ಬದಲಾಯಿಸು(_S)"
+msgstr "ಬಳಕೆದಾರನನ್ನು ಬದಲಾಯಿಸು (_S)..."
-#: ../src/gs-lock-plug.c:1362
+#: ../src/gs-lock-plug.c:1359
msgid "Log _Out"
msgstr "ಹೊರ ನಡೆ(_O)"
-#: ../src/gs-lock-plug.c:1369
+#: ../src/gs-lock-plug.c:1366
msgid "_Unlock"
msgstr "ಅನ್ಲಾಕ್ ಮಾಡು(_U)"
-#: ../src/gs-lock-plug.c:1408
+#: ../src/gs-lock-plug.c:1405
msgid "_Password:"
msgstr "ಗುಪ್ತಪದ(_P):"
diff --git a/po/ko.po b/po/ko.po
index ff2c7b9..596d321 100644
--- a/po/ko.po
+++ b/po/ko.po
@@ -1,7 +1,7 @@
# gnome-screensaver Korean message translation.
# This file is distributed under the same license as the gnome-screensaver package.
# Young-Ho Cha <ganadist@gmail.com>, 2006.
-# Changwoo Ryu <cwryu@debian.org>, 2006, 2007, 2008, 2009, 2010, 2011.
+# Changwoo Ryu <cwryu@debian.org>, 2006-2011, 2014.
#
msgid ""
msgstr ""
@@ -9,7 +9,7 @@ msgstr ""
"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-"
"screensaver&keywords=I18N+L10N&component=general\n"
"POT-Creation-Date: 2011-03-15 12:22+0000\n"
-"PO-Revision-Date: 2011-03-19 23:08+0900\n"
+"PO-Revision-Date: 2014-03-12 00:40+0900\n"
"Last-Translator: Changwoo Ryu <cwryu@debian.org>\n"
"Language-Team: GNOME Korea <gnome-kr@googlegroups.com>\n"
"MIME-Version: 1.0\n"
@@ -173,13 +173,15 @@ msgstr "확인하는 중…"
msgid "Authentication failed."
msgstr "인증이 실패했습니다."
+# 옵션 설명, 문장으로 번역
#: ../src/gnome-screensaver.c:57
msgid "Don't become a daemon"
-msgstr "데몬이 되지 않았습니다"
+msgstr "데몬이 되지 않습니다"
+# 옵션 설명, 문장으로 번역
#: ../src/gnome-screensaver.c:58
msgid "Enable debugging code"
-msgstr "디버깅 코드 사용"
+msgstr "디버깅 코드를 사용합니다"
#: ../src/gnome-screensaver.desktop.in.in.h:1
msgid "Launch screensaver and locker program"
diff --git a/po/nb.po b/po/nb.po
index 4ca4e57..fa6ab52 100644
--- a/po/nb.po
+++ b/po/nb.po
@@ -1,14 +1,14 @@
# Norwegian bokmål translation of gnome-screensaver.
# Copyright (C) 1998-2004 Free Software Foundation, Inc.
-# Kjartan Maraas <kmaraas@gnome.org>, 1998-2012.
+# Kjartan Maraas <kmaraas@gnome.org>, 1998-2016.
# Torstein Adolf Winterseth <kvikende@fsfe.org>, 2010.
#
msgid ""
msgstr ""
-"Project-Id-Version: gnome-screensaver 3.3.x\n"
+"Project-Id-Version: gnome-screensaver 3.23.x\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-01-25 20:13+0100\n"
-"PO-Revision-Date: 2012-01-25 20:14+0100\n"
+"POT-Creation-Date: 2016-11-21 08:33+0100\n"
+"PO-Revision-Date: 2016-11-21 08:33+0100\n"
"Last-Translator: Kjartan Maraas <kmaraas@gnome.org>\n"
"Language-Team: Norwegian bokmål <i18n-nb@lister.ping.uio.no>\n"
"Language: no\n"
@@ -211,34 +211,26 @@ msgstr "Ingen rettigheter til å få tilgang nå."
msgid "No longer permitted to access the system."
msgstr "Har ikke rettigheter til å aksessere systemet lenger."
-#: ../src/gs-listener-dbus.c:1148
+#: ../src/gs-listener-dbus.c:1284
msgid "failed to register with the message bus"
msgstr "klarte ikke å registrere på meldingsbussen"
-#: ../src/gs-listener-dbus.c:1158
+#: ../src/gs-listener-dbus.c:1294
msgid "not connected to the message bus"
msgstr "ikke koblet til meldingsbussen"
-#: ../src/gs-listener-dbus.c:1167 ../src/gs-listener-dbus.c:1197
+#: ../src/gs-listener-dbus.c:1303 ../src/gs-listener-dbus.c:1333
msgid "screensaver already running in this session"
msgstr "skjermsparer kjører allerede i denne sesjonen"
-#: ../src/gs-lock-plug.c:256
+#: ../src/gs-lock-plug.c:255
msgid "Time has expired."
msgstr "Tiden har løpt ut."
-#: ../src/gs-lock-plug.c:287
-msgid "You have the Caps & Num Lock keys on."
-msgstr "Du har Caps Lock- og Num Lock-tastene på."
-
-#: ../src/gs-lock-plug.c:290
+#: ../src/gs-lock-plug.c:286
msgid "You have the Caps Lock key on."
msgstr "Du har Caps Lock-tasten på."
-#: ../src/gs-lock-plug.c:293
-msgid "You have the Num Lock key on."
-msgstr "Du har Num Lock-tasten på."
-
#: ../src/gs-lock-plug.c:1350
msgid "S_witch User…"
msgstr "_Bytt bruker …"
diff --git a/po/oc.po b/po/oc.po
index 28420ee..8c30f33 100644
--- a/po/oc.po
+++ b/po/oc.po
@@ -2,709 +2,256 @@
# Occitan translation of gnome-screensaver.
# Copyright (C) 2005-2006, 2007 The Free Software Foundation, Inc.
# This file is distributed under the same license as the gnome-screensaver package.
-#
# Yannig Marchegay (Kokoyaya) <yannig@marchegay.org>, 2006-2008
+# Cédric Valmary (Tot en òc) <cvalmary@yahoo.fr>, 2015.
msgid ""
msgstr ""
"Project-Id-Version: oc\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2008-07-02 08:59+0200\n"
-"PO-Revision-Date: 2008-02-26 23:09+0100\n"
-"Last-Translator: Yannig Marchegay (Kokoyaya) <yannig@marchegay.org>\n"
-"Language-Team: Occitan <ubuntu-l10n-oci@lists.ubuntu.com>\n"
+"POT-Creation-Date: 2015-01-26 19:37+0000\n"
+"PO-Revision-Date: 2015-05-20 20:00+0200\n"
+"Last-Translator: Cédric Valmary (Tot en òc) <cvalmary@yahoo.fr>\n"
+"Language-Team: Tot en òc (totenoc.eu)\n"
+"Language: oci\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
+"X-Generator: Virtaal 0.7.1\n"
+"X-Launchpad-Export-Date: 2015-05-20 16:48+0000\n"
-#: ../data/gnome-screensaver-preferences.desktop.in.h:1
-msgid "Screensaver"
-msgstr "Estalviaire d'ecran"
-
-#: ../data/gnome-screensaver-preferences.desktop.in.h:2
-msgid "Set your screensaver preferences"
-msgstr "Definir vòstras preferéncias per l'estalviaire d'ecran"
-
-#: ../data/gnome-screensaver-preferences.glade.h:1
-msgid "<b>Screensaver preview</b>"
-msgstr ""
-
-#: ../data/gnome-screensaver-preferences.glade.h:2
-msgid "<b>Warning: the screen will not be locked for the root user.</b>"
-msgstr ""
-
-#: ../data/gnome-screensaver-preferences.glade.h:3
-msgid "Power _Management"
-msgstr ""
-
-#: ../data/gnome-screensaver-preferences.glade.h:4
-msgid "Regard the computer as _idle after:"
-msgstr ""
-
-#: ../data/gnome-screensaver-preferences.glade.h:5
-msgid "Screensaver Preferences"
-msgstr "Preferéncias del estalviaire d'ecran"
-
-#: ../data/gnome-screensaver-preferences.glade.h:6
-msgid "Screensaver Preview"
-msgstr ""
-
-#: ../data/gnome-screensaver-preferences.glade.h:7
-msgid "_Activate screensaver when computer is idle"
-msgstr ""
-
-#: ../data/gnome-screensaver-preferences.glade.h:8
-msgid "_Lock screen when screensaver is active"
-msgstr ""
-
-#: ../data/gnome-screensaver-preferences.glade.h:9
-msgid "_Preview"
-msgstr "_Previsualizacion"
-
-#: ../data/gnome-screensaver-preferences.glade.h:10
-msgid "_Screensaver theme:"
-msgstr "Tèma del estalviaire d'_ecran :"
-
-#: ../data/gnome-screensaver.directory.in.h:1
-#: ../data/gnome-screensaver.schemas.in.h:10
-msgid "Screensaver themes"
-msgstr "Tèmas d'estalviaire d'ecran"
-
-#: ../data/gnome-screensaver.directory.in.h:2
-msgid "Screensavers"
-msgstr "Estalviaires d'ecran"
-
-#: ../data/gnome-screensaver.schemas.in.h:1
-msgid "Activate when idle"
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:2
-msgid "Allow embedding a keyboard into the window"
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:3
-msgid "Allow logout"
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:4
-msgid "Allow user switching"
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:5
-msgid "Embedded keyboard command"
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:6
-msgid "Lock on activation"
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:7
-msgid "Logout command"
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:8
-msgid "Reason for being away"
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:9
-msgid "Screensaver theme selection mode"
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:11
-msgid "Set this to TRUE to activate the screensaver when the session is idle."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:12
-msgid ""
-"Set this to TRUE to allow embedding a keyboard into the window when trying "
-"to unlock. The \"keyboard_command\" key must be set with the appropriate "
-"command."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:13
-msgid "Set this to TRUE to lock the screen when the screensaver goes active."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:14
-msgid ""
-"Set this to TRUE to offer an option in the unlock dialog to switch to a "
-"different user account."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:15
-msgid ""
-"Set this to TRUE to offer an option in unlock dialog to logging out after a "
-"delay. The Delay is specified in the \"logout_delay\" key."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:16
-msgid ""
-"The command that will be run, if the \"embedded_keyboard_enabled\" key is "
-"set to TRUE, to embed a keyboard widget into the window. This command should "
-"implement an XEMBED plug interface and output a window XID on the standard "
-"output."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:17
-msgid ""
-"The command to invoke when the logout button is clicked. This command should "
-"simply log the user out without any interaction. This key has effect only if "
-"the \"logout_enable\" key is set to TRUE."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:18
-msgid ""
-"The number of minutes after screensaver activation before locking the screen."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:19
-msgid ""
-"The number of minutes after the screensaver activation before a logout "
-"option will appear in unlock dialog. This key has effect only if the "
-"\"logout_enable\" key is set to TRUE."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:20
-msgid ""
-"The number of minutes of inactivity before the session is considered idle."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:21
-msgid "The number of minutes to run before changing the screensaver theme."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:22
-msgid ""
-"The number of seconds of inactivity before signalling to power-management. "
-"This key is set and maintained by the session power-management agent."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:23
-msgid "The reason for being away from the computer."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:24
-msgid ""
-"The selection mode used by screensaver. May be \"blank-only\" to enable the "
-"screensaver without using any theme on activation, \"single\" to enable "
-"screensaver using only one theme on activation (specified in \"themes\" "
-"key), and \"random\" to enable the screensaver using a random theme on "
-"activation."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:25
-msgid "Theme for lock dialog"
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:26
-msgid "Theme to use for the lock dialog."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:27
-msgid ""
-"This key specifies the list of themes to be used by the screensaver. It's "
-"ignored when \"mode\" key is \"blank-only\", should provide the theme name "
-"when \"mode\" is \"single\", and should provide a list of themes when \"mode"
-"\" is \"random\"."
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:28
-msgid "Time before locking"
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:29
-msgid "Time before logout option"
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:30
-msgid "Time before power-management baseline"
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:31
-msgid "Time before session is considered idle"
-msgstr ""
-
-#: ../data/gnome-screensaver.schemas.in.h:32
-msgid "Time before theme change"
-msgstr "Temps abans cambi de tèma"
-
-#: ../data/lock-dialog-default.glade.h:2
-#, no-c-format
-msgid "<b>Leave a message for %R:</b>"
-msgstr ""
-
-#: ../data/lock-dialog-default.glade.h:4
-#, no-c-format
-msgid "<span size=\"small\">%U on %h</span>"
-msgstr ""
-
-#: ../data/lock-dialog-default.glade.h:6
-#, no-c-format
-msgid "<span size=\"x-large\">%R</span>"
-msgstr "<span size=\"x-large\">%R</span>"
-
-#: ../data/lock-dialog-default.glade.h:7
-msgid "_Cancel"
-msgstr "_Anullar"
-
-#: ../data/lock-dialog-default.glade.h:8
-msgid "_Leave Message"
-msgstr ""
-
-#: ../data/lock-dialog-default.glade.h:9
-msgid "_Log Out"
-msgstr "_Terminar la session"
-
-#: ../data/lock-dialog-default.glade.h:10
-msgid "_Switch User"
-msgstr "_Cambiar d'utilizaire"
-
-#: ../data/lock-dialog-default.glade.h:11 ../src/gs-lock-plug.c:1356
-msgid "_Unlock"
-msgstr "_Desvarrolhar"
-
-#: ../savers/cosmos-slideshow.desktop.in.in.h:1
-msgid "Cosmos"
-msgstr ""
-
-#: ../savers/cosmos-slideshow.desktop.in.in.h:2
-msgid "Display a slideshow of pictures of the cosmos"
-msgstr ""
-
-#: ../savers/footlogo-floaters.desktop.in.in.h:1
-msgid "Bubbles the GNOME foot logo around the screen"
-msgstr ""
-
-#: ../savers/footlogo-floaters.desktop.in.in.h:2
-msgid "Floating Feet"
-msgstr ""
-
-#: ../savers/personal-slideshow.desktop.in.h:1
-msgid "Display a slideshow from your Pictures folder"
-msgstr ""
-
-#: ../savers/personal-slideshow.desktop.in.h:2
-msgid "Pictures folder"
-msgstr "Repertòri d'imatges"
-
-#: ../savers/popsquares.desktop.in.h:1
-msgid "A pop-art-ish grid of pulsing colors."
-msgstr ""
-
-#: ../savers/popsquares.desktop.in.h:2
-msgid "Pop art squares"
-msgstr ""
-
-#: ../savers/floaters.c:84
-msgid "Show paths that images follow"
-msgstr ""
-
-#: ../savers/floaters.c:87
-msgid "Occasionally rotate images as they move"
-msgstr ""
-
-#: ../savers/floaters.c:90
-msgid "Print out frame rate and other statistics"
-msgstr ""
-
-#: ../savers/floaters.c:93
-msgid "The maximum number of images to keep on screen"
-msgstr ""
-
-#: ../savers/floaters.c:93
-msgid "MAX_IMAGES"
-msgstr ""
-
-#: ../savers/floaters.c:96
-msgid "The initial size and position of window"
-msgstr ""
-
-#: ../savers/floaters.c:96
-msgid "WIDTHxHEIGHT+X+Y"
-msgstr "LARGORxNAUTOR+X+Y"
-
-#: ../savers/floaters.c:99
-msgid "The source image to use"
-msgstr ""
-
-#. translators: the word "image" here
-#. * represents a command line argument
-#.
-#: ../savers/floaters.c:1194
-msgid "image - floats images around the screen"
-msgstr ""
-
-#: ../savers/floaters.c:1200
-#, c-format
-msgid "%s. See --help for usage information.\n"
-msgstr ""
-
-#: ../savers/floaters.c:1209
-#, c-format
-msgid "You must specify one image. See --help for usage information.\n"
-msgstr ""
-
-#: ../savers/slideshow.c:53
-msgid "Location to get images from"
-msgstr "Emplaçament del repertòri d'imatges"
-
-#: ../savers/slideshow.c:53
-msgid "PATH"
-msgstr "CAMIN"
-
-#: ../savers/slideshow.c:55
-msgid "Color to use for images background"
-msgstr ""
-
-#: ../savers/slideshow.c:55
-msgid "\"#rrggbb\""
-msgstr ""
-
-#: ../savers/slideshow.c:57
-msgid "Do not randomize pictures from location"
-msgstr ""
-
-#: ../savers/slideshow.c:59
-msgid "Do not try to stretch images on screen"
-msgstr ""
-
-#: ../src/copy-theme-dialog.c:211
-msgid "Copying files"
-msgstr "Còpia de fichièrs"
-
-#: ../src/copy-theme-dialog.c:229
-msgid "From:"
-msgstr "Expedidor :"
-
-#: ../src/copy-theme-dialog.c:233
-msgid "To:"
-msgstr "Destinatari :"
-
-#: ../src/copy-theme-dialog.c:253
-msgid "Copying themes"
-msgstr "Còpia de tèmas"
-
-#: ../src/copy-theme-dialog.c:297
-msgid "Invalid screensaver theme"
-msgstr ""
-
-#: ../src/copy-theme-dialog.c:300
-#, c-format
-msgid "%s does not appear to be a valid screensaver theme."
-msgstr ""
-
-#: ../src/copy-theme-dialog.c:480
-#, c-format
-msgid "Copying file: %u of %u"
-msgstr "Còpia del fichièr : %u sus %u"
-
-#: ../src/gnome-screensaver-command.c:62
+#: ../src/gnome-screensaver-command.c:46
msgid "Causes the screensaver to exit gracefully"
-msgstr ""
+msgstr "Demanda a l'estalviador d'ecran de quitar corrèctament"
-#: ../src/gnome-screensaver-command.c:64
+#: ../src/gnome-screensaver-command.c:48
msgid "Query the state of the screensaver"
-msgstr ""
+msgstr "Indica l'estat de l'estalviador d'ecran"
-#: ../src/gnome-screensaver-command.c:66
+#: ../src/gnome-screensaver-command.c:50
msgid "Query the length of time the screensaver has been active"
msgstr ""
+"Indica la durada pendent la quala l'estalviador d'ecran es estat actiu"
-#: ../src/gnome-screensaver-command.c:68
+#: ../src/gnome-screensaver-command.c:52
msgid "Tells the running screensaver process to lock the screen immediately"
msgstr ""
+"Demanda a l'estalviador d'ecran en cors de foncionament de varrolhar l'ecran "
+"immediatament"
-#: ../src/gnome-screensaver-command.c:70
-msgid "If the screensaver is active then switch to another graphics demo"
-msgstr ""
-
-#: ../src/gnome-screensaver-command.c:72
+#: ../src/gnome-screensaver-command.c:54
msgid "Turn the screensaver on (blank the screen)"
-msgstr ""
+msgstr "Avia l'estalviador d'ecran (escafa l'ecran)"
-#: ../src/gnome-screensaver-command.c:74
+#: ../src/gnome-screensaver-command.c:56
msgid "If the screensaver is active then deactivate it (un-blank the screen)"
-msgstr ""
-
-#: ../src/gnome-screensaver-command.c:76
-msgid "Poke the running screensaver to simulate user activity"
-msgstr ""
-
-#: ../src/gnome-screensaver-command.c:78
-msgid ""
-"Inhibit the screensaver from activating. Command blocks while inhibit is "
-"active."
-msgstr ""
-
-#: ../src/gnome-screensaver-command.c:80
-msgid "The calling application that is inhibiting the screensaver"
-msgstr ""
-
-#: ../src/gnome-screensaver-command.c:82
-msgid "The reason for inhibiting the screensaver"
-msgstr ""
+msgstr "Desactiva l'estalviador d'ecran s'es actiu (reaficha l'ecran)"
-#: ../src/gnome-screensaver-command.c:84 ../src/gnome-screensaver-dialog.c:57
+#: ../src/gnome-screensaver-command.c:58 ../src/gnome-screensaver-dialog.c:59
#: ../src/gnome-screensaver.c:56
msgid "Version of this application"
-msgstr "Version de l'aplicacion"
+msgstr "Version d'aquesta aplicacion"
-#: ../src/gnome-screensaver-command.c:307
+#: ../src/gnome-screensaver-command.c:224
#, c-format
-msgid "The screensaver is %s\n"
-msgstr ""
-
-#: ../src/gnome-screensaver-command.c:307
-msgid "active"
-msgstr "actiu"
+msgid "The screensaver is active\n"
+msgstr "L'estalviador d'ecran es actiu\n"
-#: ../src/gnome-screensaver-command.c:307
-msgid "inactive"
-msgstr "inactiu"
-
-#: ../src/gnome-screensaver-command.c:321
+#: ../src/gnome-screensaver-command.c:226
#, c-format
-msgid "The screensaver is not inhibited\n"
-msgstr ""
+msgid "The screensaver is inactive\n"
+msgstr "L'estalviador d'ecran es inactiu\n"
-#: ../src/gnome-screensaver-command.c:327
+#: ../src/gnome-screensaver-command.c:256
#, c-format
-msgid "The screensaver is being inhibited by:\n"
-msgstr ""
+msgid "The screensaver has been active for %d second.\n"
+msgid_plural "The screensaver has been active for %d seconds.\n"
+msgstr[0] "L'estalviador d'ecran es estat actiu pendent %d segonda.\n"
+msgstr[1] "L'estalviador d'ecran es estat actiu pendent %d segondas.\n"
-#: ../src/gnome-screensaver-command.c:358
+#: ../src/gnome-screensaver-command.c:258
#, c-format
-msgid "The screensaver has been active for %d seconds.\n"
-msgstr ""
+msgid "The screensaver is not currently active.\n"
+msgstr "Actualament, l'estalviador d'ecran es pas actiu.\n"
-#: ../src/gnome-screensaver-dialog.c:55
+#: ../src/gnome-screensaver-dialog.c:57
msgid "Show debugging output"
-msgstr ""
+msgstr "Aficha la sortida de debogatge"
-#: ../src/gnome-screensaver-dialog.c:59
+#: ../src/gnome-screensaver-dialog.c:61
msgid "Show the logout button"
-msgstr ""
+msgstr "Aficha lo boton de desconnexion"
-#: ../src/gnome-screensaver-dialog.c:61
+#: ../src/gnome-screensaver-dialog.c:63
msgid "Command to invoke from the logout button"
-msgstr ""
+msgstr "Comanda d'invocar dempuèi lo boton de desconnexion"
-#: ../src/gnome-screensaver-dialog.c:63
+#: ../src/gnome-screensaver-dialog.c:65
msgid "Show the switch user button"
-msgstr ""
+msgstr "Aficha lo boton de cambiament d'utilizaire"
-#: ../src/gnome-screensaver-dialog.c:65
+#: ../src/gnome-screensaver-dialog.c:67
msgid "Message to show in the dialog"
-msgstr ""
+msgstr "Messatge d'afichar dins la bóstia de dialòg"
-#: ../src/gnome-screensaver-dialog.c:65
+#. Translators: This is the example input for the --status-message command line option.
+#. Translators: This is the example input for the --away-message command line option.
+#: ../src/gnome-screensaver-dialog.c:69 ../src/gnome-screensaver-dialog.c:73
msgid "MESSAGE"
msgstr "MESSATGE"
+#: ../src/gnome-screensaver-dialog.c:71
+msgid "Not used"
+msgstr "Pas utilizat"
+
#. login: is whacked always translate to Username:
-#: ../src/gnome-screensaver-dialog.c:175 ../src/gnome-screensaver-dialog.c:176
-#: ../src/gnome-screensaver-dialog.c:177 ../src/gs-auth-pam.c:698
+#: ../src/gnome-screensaver-dialog.c:183 ../src/gnome-screensaver-dialog.c:184
+#: ../src/gnome-screensaver-dialog.c:185 ../src/gs-auth-pam.c:706
msgid "Username:"
-msgstr "Nom d'utilizaire :"
+msgstr "Nom d'utilizaire :"
-#: ../src/gnome-screensaver-dialog.c:178 ../src/gnome-screensaver-dialog.c:179
+#: ../src/gnome-screensaver-dialog.c:186 ../src/gnome-screensaver-dialog.c:187
#: ../src/gs-auth-pam.c:166
msgid "Password:"
-msgstr "Mot de pas :"
+msgstr "Senhal :"
-#: ../src/gnome-screensaver-dialog.c:180
+#: ../src/gnome-screensaver-dialog.c:188
msgid "You are required to change your password immediately (password aged)"
-msgstr ""
+msgstr "Vos cal cambiar vòstre senhal immediatament (senhal perimit)"
-#: ../src/gnome-screensaver-dialog.c:181
+#: ../src/gnome-screensaver-dialog.c:189
msgid "You are required to change your password immediately (root enforced)"
msgstr ""
+"Vos cal cambiar vòstre senhal immediatament (impausat per l'administrator)"
-#: ../src/gnome-screensaver-dialog.c:182
+#: ../src/gnome-screensaver-dialog.c:190
msgid "Your account has expired; please contact your system administrator"
msgstr ""
+"Vòstre compte a expirat ; contactatz vòstre administrator del sistèma"
-#: ../src/gnome-screensaver-dialog.c:183
+#: ../src/gnome-screensaver-dialog.c:191
msgid "No password supplied"
-msgstr ""
+msgstr "Pas cap de senhal provesit"
-#: ../src/gnome-screensaver-dialog.c:184
+#: ../src/gnome-screensaver-dialog.c:192
msgid "Password unchanged"
-msgstr ""
+msgstr "Senhal pas cambiat"
-#: ../src/gnome-screensaver-dialog.c:185
-msgid "Can not get username"
+#: ../src/gnome-screensaver-dialog.c:193
+msgid "Cannot get username"
msgstr "Impossible d'obténer un nom d'utilizaire"
-#: ../src/gnome-screensaver-dialog.c:186
-msgid "Retype new UNIX password:"
-msgstr ""
+#: ../src/gnome-screensaver-dialog.c:194
+msgid "Retype new Unix password:"
+msgstr "Repicatz un senhal Unix novèl :"
-#: ../src/gnome-screensaver-dialog.c:187
-msgid "Enter new UNIX password:"
-msgstr ""
+#: ../src/gnome-screensaver-dialog.c:195
+msgid "Enter new Unix password:"
+msgstr "Picatz un senhal Unix novèl :"
-#: ../src/gnome-screensaver-dialog.c:188
-msgid "(current) UNIX password:"
-msgstr ""
+#: ../src/gnome-screensaver-dialog.c:196
+msgid "(current) Unix password:"
+msgstr "Senhal Unix (actual) :"
-#: ../src/gnome-screensaver-dialog.c:189
+#: ../src/gnome-screensaver-dialog.c:197
msgid "Error while changing NIS password."
-msgstr ""
+msgstr "Error al moment de la modificacion del senhal NIS."
-#: ../src/gnome-screensaver-dialog.c:190
+#: ../src/gnome-screensaver-dialog.c:198
msgid "You must choose a longer password"
-msgstr ""
+msgstr "Vos cal causir un senhal mai long"
-#: ../src/gnome-screensaver-dialog.c:191
+#: ../src/gnome-screensaver-dialog.c:199
msgid "Password has been already used. Choose another."
-msgstr ""
+msgstr "Aqueste senhal es ja utilizat. Causissètz-ne un autre."
-#: ../src/gnome-screensaver-dialog.c:192
+#: ../src/gnome-screensaver-dialog.c:200
msgid "You must wait longer to change your password"
-msgstr ""
+msgstr "Vos cal esperar mai longtemps per modificar vòstre senhal"
-#: ../src/gnome-screensaver-dialog.c:193
+#: ../src/gnome-screensaver-dialog.c:201
msgid "Sorry, passwords do not match"
-msgstr ""
+msgstr "O planhèm, los senhals correspondon pas"
-#: ../src/gnome-screensaver-dialog.c:259
-msgid "Checking..."
-msgstr ""
+#: ../src/gnome-screensaver-dialog.c:267
+msgid "Checking…"
+msgstr "Verificacion en cors…"
-#: ../src/gnome-screensaver-dialog.c:301 ../src/gs-auth-pam.c:457
+#: ../src/gnome-screensaver-dialog.c:309 ../src/gs-auth-pam.c:457
msgid "Authentication failed."
-msgstr ""
-
-#: ../src/gnome-screensaver-preferences.c:498
-msgid "Blank screen"
-msgstr ""
-
-#: ../src/gnome-screensaver-preferences.c:504
-msgid "Random"
-msgstr "Aleatòri"
-
-#: ../src/gnome-screensaver-preferences.c:954
-#, c-format
-msgid "%d hour"
-msgid_plural "%d hours"
-msgstr[0] "%d ora"
-msgstr[1] "%d oras"
-
-#: ../src/gnome-screensaver-preferences.c:957
-#, c-format
-msgid "%d minute"
-msgid_plural "%d minutes"
-msgstr[0] "%d minuta"
-msgstr[1] "%d minutas"
-
-#: ../src/gnome-screensaver-preferences.c:960
-#, c-format
-msgid "%d second"
-msgid_plural "%d seconds"
-msgstr[0] "%d segonda"
-msgstr[1] "%d segonda"
-
-#. hour:minutes:seconds
-#: ../src/gnome-screensaver-preferences.c:966
-#, c-format
-msgid "%s %s %s"
-msgstr "%s %s %s"
-
-#. hour:minutes
-#. minutes:seconds
-#: ../src/gnome-screensaver-preferences.c:969
-#: ../src/gnome-screensaver-preferences.c:977
-#, c-format
-msgid "%s %s"
-msgstr "%s %s"
-
-#. hour
-#. minutes
-#. seconds
-#: ../src/gnome-screensaver-preferences.c:972
-#: ../src/gnome-screensaver-preferences.c:980
-#: ../src/gnome-screensaver-preferences.c:984
-#, c-format
-msgid "%s"
-msgstr "%s"
-
-#: ../src/gnome-screensaver-preferences.c:999
-#, c-format
-msgid "Never"
-msgstr "Jamai"
-
-#: ../src/gnome-screensaver-preferences.c:1398
-msgid "Could not load the main interface"
-msgstr "Impossible de cargar l'interfaç principala"
-
-#: ../src/gnome-screensaver-preferences.c:1400
-msgid "Please make sure that the screensaver is properly installed"
-msgstr ""
+msgstr "L'autentificacion a fracassat."
#: ../src/gnome-screensaver.c:57
msgid "Don't become a daemon"
-msgstr ""
+msgstr "Impossible de venir un « daemon » (demòni)"
#: ../src/gnome-screensaver.c:58
msgid "Enable debugging code"
-msgstr ""
+msgstr "Activa lo còde de desbogatge"
+
+#: ../src/gnome-screensaver.desktop.in.in.h:1
+msgid "Screensaver"
+msgstr "Estalviador d'ecran"
+
+#: ../src/gnome-screensaver.desktop.in.in.h:2
+msgid "Launch screensaver and locker program"
+msgstr "Aviar l'estalviador d'ecran e lo programa de varrolhatge"
#: ../src/gs-auth-pam.c:397
#, c-format
msgid "Unable to establish service %s: %s\n"
-msgstr ""
+msgstr "Impossible d'establir lo servici %s : %s\n"
#: ../src/gs-auth-pam.c:423
#, c-format
msgid "Can't set PAM_TTY=%s"
-msgstr ""
+msgstr "Impossible de definir PAM_TTY=%s"
#: ../src/gs-auth-pam.c:455
msgid "Incorrect password."
-msgstr ""
+msgstr "Senhal incorrècte."
#: ../src/gs-auth-pam.c:471
msgid "Not permitted to gain access at this time."
-msgstr ""
+msgstr "Sètz pas autorizat a accedir al sistèma a aquesta ora."
#: ../src/gs-auth-pam.c:477
msgid "No longer permitted to access the system."
-msgstr ""
+msgstr "Sètz pas pus autorizat a accedir al sistèma."
-#: ../src/gs-listener-dbus.c:1921
+#: ../src/gs-listener-dbus.c:1325
msgid "failed to register with the message bus"
-msgstr ""
+msgstr "l'enregistrament sul bus de messatge a fracassat"
-#: ../src/gs-listener-dbus.c:1931
+#: ../src/gs-listener-dbus.c:1335
msgid "not connected to the message bus"
-msgstr ""
+msgstr "pas connectat al bus de messatge"
-#: ../src/gs-listener-dbus.c:1940
+#: ../src/gs-listener-dbus.c:1343 ../src/gs-listener-dbus.c:1373
msgid "screensaver already running in this session"
msgstr ""
+"l'estalviador d'ecran es ja en cors de foncionament per aquesta sesilha"
-#: ../src/gs-lock-plug.c:271
+#: ../src/gs-lock-plug.c:294
msgid "Time has expired."
-msgstr ""
+msgstr "Relambi expirat."
-#: ../src/gs-lock-plug.c:299
+#: ../src/gs-lock-plug.c:325
msgid "You have the Caps Lock key on."
-msgstr ""
+msgstr "La tòca Varr. Maj. es quichada."
-#: ../src/gs-lock-plug.c:1336
-msgid "S_witch User..."
-msgstr ""
+#: ../src/gs-lock-plug.c:1398
+msgid "S_witch User…"
+msgstr "Cambiar d'_utilizaire…"
-#: ../src/gs-lock-plug.c:1345
+#: ../src/gs-lock-plug.c:1407
msgid "Log _Out"
-msgstr ""
+msgstr "Se _desconnectar"
-#. To translators: This expands to USERNAME on HOSTNAME
-#: ../src/gs-lock-plug.c:1522
-msgid "%U on %h"
-msgstr "%U sus %h"
+#: ../src/gs-lock-plug.c:1414
+msgid "_Unlock"
+msgstr "_Desvarrolhar"
-#: ../src/gs-lock-plug.c:1536
+#: ../src/gs-lock-plug.c:1622 ../src/gs-lock-plug.c:1672
msgid "_Password:"
-msgstr "Mot de _pas :"
+msgstr "Sen_hal :"
diff --git a/po/or.po b/po/or.po
index c1a3ead..3ee12d4 100644
--- a/po/or.po
+++ b/po/or.po
@@ -4,16 +4,17 @@
#
# Subhransu Behera <arya_subhransu@yahoo.co.in>, 2006.
# Subhransu Behera <sbehera@redhat.com>, 2006.
-# Manoj Kumar Giri <mgiri@redhat.com>, 2009, 2010, 2011.
+# Manoj Kumar Giri <mgiri@redhat.com>, 2009, 2010, 2011, 2012.
msgid ""
msgstr ""
"Project-Id-Version: or\n"
-"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug."
-"cgi?product=gnome-screensaver&component=general\n"
-"POT-Creation-Date: 2011-02-08 00:55+0000\n"
-"PO-Revision-Date: 2011-03-04 15:16+0530\n"
+"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-"
+"screensaver&keywords=I18N+L10N&component=general\n"
+"POT-Creation-Date: 2012-10-16 21:29+0000\n"
+"PO-Revision-Date: 2012-11-28 19:54+0530\n"
"Last-Translator: Manoj Kumar Giri <mgiri@redhat.com>\n"
-"Language-Team: Oriya <Translation-team-or@lists.sourceforge.net>\n"
+"Language-Team: Oriya <oriya-it@googlegroups.com>\n"
+"Language: or\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
@@ -24,206 +25,57 @@ msgstr ""
"\n"
"\n"
"\n"
-"X-Generator: Lokalize 1.1\n"
+"X-Generator: Lokalize 1.5\n"
-#: ../data/gnome-screensaver.directory.in.h:1
-msgid "Screensaver themes"
-msgstr "ପରଦା ସଂରକ୍ଷକ ପ୍ରସଙ୍ଗ"
-
-#: ../data/gnome-screensaver.directory.in.h:2
-msgid "Screensavers"
-msgstr "ପରଦା ସଂରକ୍ଷକ"
-
-#. Translators: This is the name of a desktop background image that shows outer space images.
-#. You might want to translate it into the equivalent words of your language
-#: ../data/images/cosmos/cosmos.xml.in.in.h:3
-#: ../savers/cosmos-slideshow.desktop.in.in.h:1
-msgid "Cosmos"
-msgstr "ବିଶ୍ବବ୍ରହ୍ମାଣ୍ଡ"
-
-#: ../savers/cosmos-slideshow.desktop.in.in.h:2
-msgid "Display a slideshow of pictures of the cosmos"
-msgstr "ବିଶ୍ବବ୍ରହ୍ମାଣ୍ଡର ଛବିଗୁଡିକର ଗୋଟିଏ ସ୍ଲାଇଡପ୍ରଦର୍ଶନୀ ପ୍ରଦର୍ଶନ କରନ୍ତୁ"
-
-#: ../savers/footlogo-floaters.desktop.in.in.h:1
-msgid "Bubbles the GNOME foot logo around the screen"
-msgstr " ସ୍କ୍ରିନ ଚାରିପଟେ GNOME ପାଦଲୋଗୋ ବୁଦବୁଦ କରେ"
-
-#: ../savers/footlogo-floaters.desktop.in.in.h:2
-msgid "Floating Feet"
-msgstr "ଭାସୁଥିବା ପାଦ"
-
-#: ../savers/personal-slideshow.desktop.in.in.h:1
-msgid "Display a slideshow from your Pictures folder"
-msgstr "ଆପଣଙ୍କର ଛବି ଫୋଲ୍ଡରରୁ ଗୋଟିଏ ସ୍ଲାଇଡସୋ ପ୍ରଦର୍ଶନ କର"
-
-#: ../savers/personal-slideshow.desktop.in.in.h:2
-msgid "Pictures folder"
-msgstr "ଛବି ଫୋଲ୍ଡର"
-
-#: ../savers/popsquares.desktop.in.in.h:1
-msgid "A pop-art-ish grid of pulsing colors."
-msgstr "ଗୋଟିଏ ପପ-କଳା-ୟୁକ୍ତ ପଲ୍ସିଙ୍ଗ ରଙ୍ଗଗୁଡିକର ଗ୍ରୀଡ"
-
-#: ../savers/popsquares.desktop.in.in.h:2
-msgid "Pop art squares"
-msgstr "ପପ କଳା ବର୍ଗକ୍ଷେତ୍ରଗୁଡିକ"
-
-#: ../savers/popsquares.c:50 ../savers/floaters.c:1184
-#, c-format
-msgid "%s. See --help for usage information.\n"
-msgstr "%s. ଦେଖନ୍ତୁ --ସୂଚନା ଉପୟୋଗ କରିବା ନିମନ୍ତେ ସାହାୟ୍ଯ।\n"
-
-#: ../savers/floaters.c:88
-msgid "Show paths that images follow"
-msgstr "ପ୍ରତିଛବିଗୁଡ଼ିକ ଅନୁସରଣ କରୁଥିବା ପଥକୁ ଦର୍ଶାନ୍ତୁ"
-
-#: ../savers/floaters.c:91
-msgid "Occasionally rotate images as they move"
-msgstr "ସାମୟିକ ଭାବରେ ପ୍ରତିଛବିଗୁଡ଼ିକୁ ସେମାନେ ଗତି କରିବା ସମୟରେ ଘୁରାନ୍ତୁ"
-
-#: ../savers/floaters.c:94
-msgid "Print out frame rate and other statistics"
-msgstr "ଫ୍ରେମ ହାର ଏବଂ ଅନ୍ୟାନ୍ୟ ପରିସଂଖ୍ୟାନଗୁଡ଼ିକୁ ମୁଦ୍ରଣ କରନ୍ତୁ"
-
-#: ../savers/floaters.c:97
-msgid "The maximum number of images to keep on screen"
-msgstr "ପରଦା ଉପରେ ରଖିବା ପାଇଁ ସର୍ବାଧିକ ସଂଖ୍ୟକ ପ୍ରତିଛବି"
-
-#: ../savers/floaters.c:97
-msgid "MAX_IMAGES"
-msgstr "MAX_IMAGES"
-
-#: ../savers/floaters.c:100
-msgid "The initial size and position of window"
-msgstr "ୱିଣ୍ଡୋର ପ୍ରାରମ୍ଭିକ ଆକାର ଏବଂ ସ୍ଥାନ"
-
-#: ../savers/floaters.c:100
-msgid "WIDTHxHEIGHT+X+Y"
-msgstr "WIDTHxHEIGHT+X+Y"
-
-#: ../savers/floaters.c:103
-msgid "The source image to use"
-msgstr "ବ୍ଯବହାର କରିବାକୁ ଥିବା ଉତ୍ସର ପ୍ରତିଛବି"
-
-#. translators: the word "image" here
-#. * represents a command line argument
-#.
-#: ../savers/floaters.c:1178
-#| msgid "image - floats images around the screen"
-msgid "image — floats images around the screen"
-msgstr "ଚିତ୍ର - ପରଦାର ଚାରିପଟେ ଚିତ୍ରଗୁଡିକୁ ଭସାଇ ଥାଏ"
-
-#: ../savers/floaters.c:1193
-#, c-format
-msgid "You must specify one image. See --help for usage information.\n"
-msgstr ""
-"ଆପଣଙ୍କୁ ଗୋଟିଏ ଚିତ୍ର ନିଦ୍ଦିଷ୍ଟ କରିବା ଆବଶ୍ଯକ। ଦେଖନ୍ତୁ --ସୂଚନା ଉପୟୋଗ କରିବା ନିମନ୍ତେ ସାହାୟ୍ଯ।\n"
-
-#: ../savers/slideshow.c:53
-msgid "Location to get images from"
-msgstr "ଠାରୁ ଚିତ୍ରଗୁଡିକୁ ପ୍ରାପ୍ତ କରିବା ପାଇଁ ଅବସ୍ଥାନ"
-
-#: ../savers/slideshow.c:53
-msgid "PATH"
-msgstr "ପଥ"
-
-#: ../savers/slideshow.c:55
-#| msgid "Color to use for images background"
-msgid "Color to use for image background"
-msgstr "ପ୍ରତିଛବିଗୁଡ଼ିକର ପୃଷ୍ଠଭୂମୀ ପାଇଁ ବ୍ୟବହାର କରିବାକୁ ଥିବା ରଙ୍ଗ"
-
-#: ../savers/slideshow.c:55
-msgid "\"#rrggbb\""
-msgstr "\"#rrggbb\""
-
-#: ../savers/slideshow.c:57
-msgid "Do not randomize pictures from location"
-msgstr "ସଠିକ ସ୍ଥାନରୁ ପ୍ରତିଛବିଗୁଡ଼ିକୁ କ୍ରମମୁକ୍ତ କରନ୍ତୁ ନାହିଁ"
-
-#: ../savers/slideshow.c:59
-msgid "Do not try to stretch images on screen"
-msgstr "ପରଦାରେ ପ୍ରତିଛବିଗୁଡ଼ିକୁ ଟାଣିବାକୁ ଚେଷ୍ଟାକରନ୍ତୁ ନାହିଁ"
-
-#: ../src/gnome-screensaver-command.c:62
+#: ../src/gnome-screensaver-command.c:46
msgid "Causes the screensaver to exit gracefully"
msgstr "ମର୍ୟ୍ଯାଦାର ସହିତ ପରଦା ସଂରକ୍ଷକକୁ ପ୍ରାସ୍ଥାନ କରିବାର କାରଣଉତ୍ପନ୍ନ କରେ।"
-#: ../src/gnome-screensaver-command.c:64
+#: ../src/gnome-screensaver-command.c:48
msgid "Query the state of the screensaver"
msgstr "ପରଦା ସଂରକ୍ଷକର ସ୍ଥିତିର ପ୍ରଶ୍ନ କରେ"
-#: ../src/gnome-screensaver-command.c:66
+#: ../src/gnome-screensaver-command.c:50
msgid "Query the length of time the screensaver has been active"
msgstr "ପରଦା ସଂରକ୍ଷକ ସକ୍ରିଯ ରହିଥିବା ସମଯର ଦୀର୍ଘତା ପ୍ରଶ୍ନ କର"
-#: ../src/gnome-screensaver-command.c:68
+#: ../src/gnome-screensaver-command.c:52
msgid "Tells the running screensaver process to lock the screen immediately"
-msgstr "ଚାଲୁଥିବା ପରଦା ସଂରକ୍ଷକ ପ୍ରକ୍ରିଯାକୁ ଅତିଶୀଘ୍ର ସ୍କ୍ରିନକୁ ତାଲାବନ୍ଦ କରିବା ପାଇଁ କହେ"
-
-#: ../src/gnome-screensaver-command.c:70
-msgid "If the screensaver is active then switch to another graphics demo"
-msgstr "ୟଦି ପରଦା ସଂରକ୍ଷକ ସକ୍ରିଯ ଅଟେ, ତେବେ ଅନ୍ଯ ଗୋଟିଏ ଗ୍ରାଫିକ୍ସ ଡେମୋକୁ ବଦଳାଅ"
+msgstr ""
+"ଚାଲୁଥିବା ପରଦା ସଂରକ୍ଷକ ପ୍ରକ୍ରିଯାକୁ ଅତିଶୀଘ୍ର ସ୍କ୍ରିନକୁ ତାଲାବନ୍ଦ କରିବା ପାଇଁ କହେ"
-#: ../src/gnome-screensaver-command.c:72
+#: ../src/gnome-screensaver-command.c:54
msgid "Turn the screensaver on (blank the screen)"
msgstr "ପରଦା ସଂରକ୍ଷକକୁ ଆରମ୍ଭ କର(ଖାଲି ସ୍କ୍ରିନ)"
-#: ../src/gnome-screensaver-command.c:74
+#: ../src/gnome-screensaver-command.c:56
msgid "If the screensaver is active then deactivate it (un-blank the screen)"
msgstr "ୟଦି ପରଦା ସଂରକ୍ଷକ ସକ୍ରିଯ ଅଟେ ଏହାକୁ ନିଷ୍କ୍ରିଯ କର( ସ୍କ୍ରିନକୁ ପୁରଣ କର)"
-#: ../src/gnome-screensaver-command.c:76
-msgid "Poke the running screensaver to simulate user activity"
-msgstr "ଚାଲୁଥିବା ସ୍କ୍ରିନସ୍ଭରକୁ ଉପୟୋଗକର୍ତ୍ତା କାର୍ୟ୍ଯକଳାପକୁ ବାହାନା କରିବା ପାଇଁ ଆଲୋଡିତ କର"
-
-#: ../src/gnome-screensaver-command.c:78
-msgid ""
-"Inhibit the screensaver from activating. Command blocks while inhibit is "
-"active."
-msgstr "ସକ୍ରିଯ ହେବାରୁ ସ୍କ୍ରିନ ସେଭରକୁ ନିଷେଧ କର। ନିଷେଧ ସକ୍ରିଯ ଥିବା ବେଳେ ଆଦେଶ ଅବରୋଧିତ ହୁଏ"
-
-#: ../src/gnome-screensaver-command.c:80
-msgid "The calling application that is inhibiting the screensaver"
-msgstr "ଡାକୁଥିବା ପ୍ରଯୋଗ ୟାହାକି ପରଦା ସଂରକ୍ଷକକୁ ନିଷେଧ କରୁଛି"
-
-#: ../src/gnome-screensaver-command.c:82
-msgid "The reason for inhibiting the screensaver"
-msgstr "ପରଦା ସଂରକ୍ଷକକୁ ନିଷେଧ କରିବା ନିମନ୍ତେ କାରଣ"
-
-#: ../src/gnome-screensaver-command.c:84 ../src/gnome-screensaver-dialog.c:59
+#: ../src/gnome-screensaver-command.c:58 ../src/gnome-screensaver-dialog.c:59
#: ../src/gnome-screensaver.c:56
msgid "Version of this application"
msgstr "ଏହି ପ୍ରୟୋଗର ସଂସ୍କରଣ"
-#: ../src/gnome-screensaver-command.c:316
+#: ../src/gnome-screensaver-command.c:224
#, c-format
-#| msgid "The screensaver is %s\n"
msgid "The screensaver is active\n"
msgstr "ପରଦା ସଂରକ୍ଷକଟି ସକ୍ରିୟ ଅଛି\n"
-#: ../src/gnome-screensaver-command.c:316
+#: ../src/gnome-screensaver-command.c:226
#, c-format
-#| msgid "The screensaver is %s\n"
msgid "The screensaver is inactive\n"
msgstr "ପରଦା ସଂରକ୍ଷକ ନିଷ୍କ୍ରିୟ ଅଛି\n"
-#: ../src/gnome-screensaver-command.c:330
-#, c-format
-msgid "The screensaver is not inhibited\n"
-msgstr "ପରଦା ସଂରକ୍ଷକକୁ ବାରଣ କରାଯାଇନାହିଁ\n"
-
-#: ../src/gnome-screensaver-command.c:336
+#: ../src/gnome-screensaver-command.c:256
#, c-format
-msgid "The screensaver is being inhibited by:\n"
-msgstr "ଦ୍ୱାରା ପରଦା ସଂରକ୍ଷକଟି ବାରଣ କରାଯାଇଥାଏ:\n"
+#| msgid "The screensaver has been active for %d seconds.\n"
+msgid "The screensaver has been active for %d second.\n"
+msgid_plural "The screensaver has been active for %d seconds.\n"
+msgstr[0] "ପରଦା ସଂରକ୍ଷକ %d ସେକେଣ୍ଡ ପାଇଁ ସକ୍ରିୟ ହୋଇଛି।\n"
+msgstr[1] "ପରଦା ସଂରକ୍ଷକ %d ସେକେଣ୍ଡ ପାଇଁ ସକ୍ରିୟ ହୋଇଛି।\n"
-#: ../src/gnome-screensaver-command.c:367
-#, c-format
-msgid "The screensaver has been active for %d seconds.\n"
-msgstr "ପରଦା ସଂରକ୍ଷକ %d ସେକେଣ୍ଡ ପାଇଁ ସକ୍ରିଯ ହୋଇଛି।\n"
-
-#: ../src/gnome-screensaver-command.c:371
+#: ../src/gnome-screensaver-command.c:258
#, c-format
msgid "The screensaver is not currently active.\n"
msgstr "ପରଦା ସଂରକ୍ଷକଟି ବର୍ତ୍ତମାନ ସକ୍ରିୟ ନାହିଁ।\n"
@@ -272,7 +124,8 @@ msgstr "ପ୍ରବେଶ ସଙ୍କେତ:"
#: ../src/gnome-screensaver-dialog.c:188
msgid "You are required to change your password immediately (password aged)"
msgstr ""
-"ଆପଣ ଆପଣଙ୍କର ପ୍ରବେଶ ସଙ୍କେତକୁ ଯଥାଶୀଘ୍ର ବଦଳାଇବା ଆବଶ୍ଯକ (ପ୍ରବେଶ ସଙ୍କେତ କାଲବାଧିତ ହୋଇସାରିଛି)"
+"ଆପଣ ଆପଣଙ୍କର ପ୍ରବେଶ ସଙ୍କେତକୁ ଯଥାଶୀଘ୍ର ବଦଳାଇବା ଆବଶ୍ଯକ (ପ୍ରବେଶ ସଙ୍କେତ କାଲବାଧିତ "
+"ହୋଇସାରିଛି)"
#: ../src/gnome-screensaver-dialog.c:189
msgid "You are required to change your password immediately (root enforced)"
@@ -281,7 +134,8 @@ msgstr "ଆପଣ ଆପଣଙ୍କର ପ୍ରବେଶ ସଙ୍କେତକ
#: ../src/gnome-screensaver-dialog.c:190
msgid "Your account has expired; please contact your system administrator"
msgstr ""
-"ଆପଣଙ୍କର ଖାତାଟି ଅଚଳ ବନ୍ଦ ହୋଇଯାଇଛି; ଦୟାକରି ଆପଣଙ୍କ ତନ୍ତ୍ର ପ୍ରଶାସକଙ୍କ ସହିତ ଯୋଗାଯୋଗ କରନ୍ତୁ"
+"ଆପଣଙ୍କର ଖାତାଟି ଅଚଳ ବନ୍ଦ ହୋଇଯାଇଛି; ଦୟାକରି ଆପଣଙ୍କ ତନ୍ତ୍ର ପ୍ରଶାସକଙ୍କ ସହିତ "
+"ଯୋଗାଯୋଗ କରନ୍ତୁ"
#: ../src/gnome-screensaver-dialog.c:191
msgid "No password supplied"
@@ -292,22 +146,18 @@ msgid "Password unchanged"
msgstr "ପ୍ରବେଶ ସଙ୍କେତ ଟି ଅପରିବର୍ତ୍ତିତ ଅଛି"
#: ../src/gnome-screensaver-dialog.c:193
-#| msgid "Can not get username"
msgid "Cannot get username"
msgstr "ଚାଳକ ନାମକୁ ପାଇ ପାରିବେ ନାହିଁ"
#: ../src/gnome-screensaver-dialog.c:194
-#| msgid "Retype new UNIX password:"
msgid "Retype new Unix password:"
msgstr "ନୂତନ Unix ପ୍ରବେଶ ସଙ୍କେତକୁ ପୁନର୍ବାର ଟାଇପ କରନ୍ତୁ:"
#: ../src/gnome-screensaver-dialog.c:195
-#| msgid "Enter new UNIX password:"
msgid "Enter new Unix password:"
msgstr "ନୂତନ Unix ପ୍ରବେଶ ସଙ୍କେତକୁ ଭରଣ କରନ୍ତୁ:"
#: ../src/gnome-screensaver-dialog.c:196
-#| msgid "(current) UNIX password:"
msgid "(current) Unix password:"
msgstr "(ପ୍ରଚଳିତ) Unix ପ୍ରବେଶ ସଙ୍କେତ:"
@@ -332,7 +182,6 @@ msgid "Sorry, passwords do not match"
msgstr "କ୍ଷମା କରିବେ, ପ୍ରବେଶ ସଙ୍କେତଟି ମିଶୁ ହେଉନାହିଁ"
#: ../src/gnome-screensaver-dialog.c:267
-#| msgid "Checking..."
msgid "Checking…"
msgstr "ଯାଞ୍ଚ କରୁଅଛି..."
@@ -349,14 +198,13 @@ msgid "Enable debugging code"
msgstr "ତ୍ରୁଟି ନିବାରଣ ସଂକେତକୁ ସକ୍ରିୟ କରନ୍ତୁ"
#: ../src/gnome-screensaver.desktop.in.in.h:1
-#| msgid "Launch screen saver and locker program"
-msgid "Launch screensaver and locker program"
-msgstr "ପରଦା ସଂରକ୍ଷକ ଏବଂ ଅପରିବର୍ତ୍ତନୀୟ ପ୍ରଗ୍ରାମକୁ ଆରମ୍ଭ କରନ୍ତୁ"
-
-#: ../src/gnome-screensaver.desktop.in.in.h:2
msgid "Screensaver"
msgstr "ପରଦା ସଂରକ୍ଷକ"
+#: ../src/gnome-screensaver.desktop.in.in.h:2
+msgid "Launch screensaver and locker program"
+msgstr "ପରଦା ସଂରକ୍ଷକ ଏବଂ ଅପରିବର୍ତ୍ତନୀୟ ପ୍ରଗ୍ରାମକୁ ଆରମ୍ଭ କରନ୍ତୁ"
+
#: ../src/gs-auth-pam.c:397
#, c-format
msgid "Unable to establish service %s: %s\n"
@@ -379,61 +227,163 @@ msgstr "ଏହି ସମଯରେ ପ୍ରବେଶ ଲାଭ କରିବା
msgid "No longer permitted to access the system."
msgstr "ସିଷ୍ଟମକୁ ପ୍ରବେଶ କରିବା ପାଇଁ ଆଉ ଅନୁମତି ଦିଆୟିବନାହିଁ"
-#: ../src/gs-listener-dbus.c:1912
+#: ../src/gs-listener-dbus.c:1285
msgid "failed to register with the message bus"
msgstr "ସଂଦେଶ ବସ ସହିତ ପଞ୍ଜିକରଣ କରିବାକୁ ବିଫଳ ହେଲା"
-#: ../src/gs-listener-dbus.c:1922
+#: ../src/gs-listener-dbus.c:1295
msgid "not connected to the message bus"
msgstr "ସଂଦେଶ ବସ୍ ସହିତ ସଂୟୋଗ ହୋଇ ନାହିଁ"
-#: ../src/gs-listener-dbus.c:1931
+#: ../src/gs-listener-dbus.c:1304 ../src/gs-listener-dbus.c:1334
msgid "screensaver already running in this session"
msgstr "ଏହି ଅଧିବେଶନରେ ପରଦା ସଂରକ୍ଷକ ପୂର୍ବରୁ ଚାଲୁଛି"
-#: ../src/gs-lock-plug.c:256
+#: ../src/gs-lock-plug.c:255
msgid "Time has expired."
msgstr "ସମଯ ସମାପ୍ତ ହୋଇୟାଇଛି"
-#: ../src/gs-lock-plug.c:287
-#| msgid "You have the Caps Lock key on."
-msgid "You have the Caps & Num Lock keys on."
-msgstr "ଆପଣଙ୍କର Caps & Num ଲକ କି ଅନ ଅଛି।"
-
-#: ../src/gs-lock-plug.c:290
+#: ../src/gs-lock-plug.c:286
msgid "You have the Caps Lock key on."
msgstr "ଆପଣଙ୍କର କ୍ଯାପସ୍ ଲକ କି ଅନ୍ ଅଛି।"
-#: ../src/gs-lock-plug.c:293
-#| msgid "You have the Caps Lock key on."
-msgid "You have the Num Lock key on."
-msgstr "ଆପଣଙ୍କର Num ଲକ କି ଅନ ଅଛି।"
-
-#: ../src/gs-lock-plug.c:1320
-#| msgid "_Switch User"
+#: ../src/gs-lock-plug.c:1350
msgid "S_witch User…"
msgstr "ବ୍ଯବହାରକାରୀ ବଦଳାନ୍ତୁ (_w)..."
-#: ../src/gs-lock-plug.c:1329
+#: ../src/gs-lock-plug.c:1359
msgid "Log _Out"
msgstr "ଲଗଆଉଟ କରନ୍ତୁ (_O)"
-#: ../src/gs-lock-plug.c:1336
+#: ../src/gs-lock-plug.c:1366
msgid "_Unlock"
msgstr "ତାଲାଖୋଲନ୍ତୁ (_U)"
-#: ../src/gs-lock-plug.c:1371
+#: ../src/gs-lock-plug.c:1405
msgid "_Password:"
msgstr "ପ୍ରବେଶ ସଂଙ୍କେତ (_P):"
-#: ../src/gs-window-x11.c:2294
-#| msgid "%s %s"
-msgid "%a %R"
-msgstr "%a %R"
+#~ msgid "Screensaver themes"
+#~ msgstr "ପରଦା ସଂରକ୍ଷକ ପ୍ରସଙ୍ଗ"
+
+#~ msgid "Screensavers"
+#~ msgstr "ପରଦା ସଂରକ୍ଷକ"
+
+#~ msgid "Cosmos"
+#~ msgstr "ବିଶ୍ବବ୍ରହ୍ମାଣ୍ଡ"
+
+#~ msgid "Display a slideshow of pictures of the cosmos"
+#~ msgstr "ବିଶ୍ବବ୍ରହ୍ମାଣ୍ଡର ଛବିଗୁଡିକର ଗୋଟିଏ ସ୍ଲାଇଡପ୍ରଦର୍ଶନୀ ପ୍ରଦର୍ଶନ କରନ୍ତୁ"
+
+#~ msgid "Bubbles the GNOME foot logo around the screen"
+#~ msgstr " ସ୍କ୍ରିନ ଚାରିପଟେ GNOME ପାଦଲୋଗୋ ବୁଦବୁଦ କରେ"
+
+#~ msgid "Floating Feet"
+#~ msgstr "ଭାସୁଥିବା ପାଦ"
+
+#~ msgid "Display a slideshow from your Pictures folder"
+#~ msgstr "ଆପଣଙ୍କର ଛବି ଫୋଲ୍ଡରରୁ ଗୋଟିଏ ସ୍ଲାଇଡସୋ ପ୍ରଦର୍ଶନ କର"
+
+#~ msgid "Pictures folder"
+#~ msgstr "ଛବି ଫୋଲ୍ଡର"
+
+#~ msgid "A pop-art-ish grid of pulsing colors."
+#~ msgstr "ଗୋଟିଏ ପପ-କଳା-ୟୁକ୍ତ ପଲ୍ସିଙ୍ଗ ରଙ୍ଗଗୁଡିକର ଗ୍ରୀଡ"
+
+#~ msgid "Pop art squares"
+#~ msgstr "ପପ କଳା ବର୍ଗକ୍ଷେତ୍ରଗୁଡିକ"
+
+#~ msgid "%s. See --help for usage information.\n"
+#~ msgstr "%s. ଦେଖନ୍ତୁ --ସୂଚନା ଉପୟୋଗ କରିବା ନିମନ୍ତେ ସାହାୟ୍ଯ।\n"
+
+#~ msgid "Show paths that images follow"
+#~ msgstr "ପ୍ରତିଛବିଗୁଡ଼ିକ ଅନୁସରଣ କରୁଥିବା ପଥକୁ ଦର୍ଶାନ୍ତୁ"
+
+#~ msgid "Occasionally rotate images as they move"
+#~ msgstr "ସାମୟିକ ଭାବରେ ପ୍ରତିଛବିଗୁଡ଼ିକୁ ସେମାନେ ଗତି କରିବା ସମୟରେ ଘୁରାନ୍ତୁ"
+
+#~ msgid "Print out frame rate and other statistics"
+#~ msgstr "ଫ୍ରେମ ହାର ଏବଂ ଅନ୍ୟାନ୍ୟ ପରିସଂଖ୍ୟାନଗୁଡ଼ିକୁ ମୁଦ୍ରଣ କରନ୍ତୁ"
+
+#~ msgid "The maximum number of images to keep on screen"
+#~ msgstr "ପରଦା ଉପରେ ରଖିବା ପାଇଁ ସର୍ବାଧିକ ସଂଖ୍ୟକ ପ୍ରତିଛବି"
+
+#~ msgid "MAX_IMAGES"
+#~ msgstr "MAX_IMAGES"
+
+#~ msgid "The initial size and position of window"
+#~ msgstr "ୱିଣ୍ଡୋର ପ୍ରାରମ୍ଭିକ ଆକାର ଏବଂ ସ୍ଥାନ"
+
+#~ msgid "WIDTHxHEIGHT+X+Y"
+#~ msgstr "WIDTHxHEIGHT+X+Y"
+
+#~ msgid "The source image to use"
+#~ msgstr "ବ୍ଯବହାର କରିବାକୁ ଥିବା ଉତ୍ସର ପ୍ରତିଛବି"
+
+#~| msgid "image - floats images around the screen"
+#~ msgid "image — floats images around the screen"
+#~ msgstr "ଚିତ୍ର - ପରଦାର ଚାରିପଟେ ଚିତ୍ରଗୁଡିକୁ ଭସାଇ ଥାଏ"
+
+#~ msgid "You must specify one image. See --help for usage information.\n"
+#~ msgstr ""
+#~ "ଆପଣଙ୍କୁ ଗୋଟିଏ ଚିତ୍ର ନିଦ୍ଦିଷ୍ଟ କରିବା ଆବଶ୍ଯକ। ଦେଖନ୍ତୁ --ସୂଚନା ଉପୟୋଗ କରିବା ନିମନ୍ତେ ସାହାୟ୍ଯ।\n"
+
+#~ msgid "Location to get images from"
+#~ msgstr "ଠାରୁ ଚିତ୍ରଗୁଡିକୁ ପ୍ରାପ୍ତ କରିବା ପାଇଁ ଅବସ୍ଥାନ"
+
+#~ msgid "PATH"
+#~ msgstr "ପଥ"
+
+#~| msgid "Color to use for images background"
+#~ msgid "Color to use for image background"
+#~ msgstr "ପ୍ରତିଛବିଗୁଡ଼ିକର ପୃଷ୍ଠଭୂମୀ ପାଇଁ ବ୍ୟବହାର କରିବାକୁ ଥିବା ରଙ୍ଗ"
+
+#~ msgid "\"#rrggbb\""
+#~ msgstr "\"#rrggbb\""
+
+#~ msgid "Do not randomize pictures from location"
+#~ msgstr "ସଠିକ ସ୍ଥାନରୁ ପ୍ରତିଛବିଗୁଡ଼ିକୁ କ୍ରମମୁକ୍ତ କରନ୍ତୁ ନାହିଁ"
+
+#~ msgid "Do not try to stretch images on screen"
+#~ msgstr "ପରଦାରେ ପ୍ରତିଛବିଗୁଡ଼ିକୁ ଟାଣିବାକୁ ଚେଷ୍ଟାକରନ୍ତୁ ନାହିଁ"
+
+#~ msgid "If the screensaver is active then switch to another graphics demo"
+#~ msgstr "ୟଦି ପରଦା ସଂରକ୍ଷକ ସକ୍ରିଯ ଅଟେ, ତେବେ ଅନ୍ଯ ଗୋଟିଏ ଗ୍ରାଫିକ୍ସ ଡେମୋକୁ ବଦଳାଅ"
+
+#~ msgid "Poke the running screensaver to simulate user activity"
+#~ msgstr "ଚାଲୁଥିବା ସ୍କ୍ରିନସ୍ଭରକୁ ଉପୟୋଗକର୍ତ୍ତା କାର୍ୟ୍ଯକଳାପକୁ ବାହାନା କରିବା ପାଇଁ ଆଲୋଡିତ କର"
+
+#~ msgid ""
+#~ "Inhibit the screensaver from activating. Command blocks while inhibit is "
+#~ "active."
+#~ msgstr "ସକ୍ରିଯ ହେବାରୁ ସ୍କ୍ରିନ ସେଭରକୁ ନିଷେଧ କର। ନିଷେଧ ସକ୍ରିଯ ଥିବା ବେଳେ ଆଦେଶ ଅବରୋଧିତ ହୁଏ"
+
+#~ msgid "The calling application that is inhibiting the screensaver"
+#~ msgstr "ଡାକୁଥିବା ପ୍ରଯୋଗ ୟାହାକି ପରଦା ସଂରକ୍ଷକକୁ ନିଷେଧ କରୁଛି"
+
+#~ msgid "The reason for inhibiting the screensaver"
+#~ msgstr "ପରଦା ସଂରକ୍ଷକକୁ ନିଷେଧ କରିବା ନିମନ୍ତେ କାରଣ"
+
+#~ msgid "The screensaver is not inhibited\n"
+#~ msgstr "ପରଦା ସଂରକ୍ଷକକୁ ବାରଣ କରାଯାଇନାହିଁ\n"
+
+#~ msgid "The screensaver is being inhibited by:\n"
+#~ msgstr "ଦ୍ୱାରା ପରଦା ସଂରକ୍ଷକଟି ବାରଣ କରାଯାଇଥାଏ:\n"
+
+#~| msgid "You have the Caps Lock key on."
+#~ msgid "You have the Caps & Num Lock keys on."
+#~ msgstr "ଆପଣଙ୍କର Caps & Num ଲକ କି ଅନ ଅଛି।"
+
+#~| msgid "You have the Caps Lock key on."
+#~ msgid "You have the Num Lock key on."
+#~ msgstr "ଆପଣଙ୍କର Num ଲକ କି ଅନ ଅଛି।"
+
+#~| msgid "%s %s"
+#~ msgid "%a %R"
+#~ msgstr "%a %R"
-#: ../src/gs-window-x11.c:2296
-msgid "%a %l:%M %p"
-msgstr "%a %l:%M %p"
+#~ msgid "%a %l:%M %p"
+#~ msgstr "%a %l:%M %p"
#~ msgid "Set your screensaver preferences"
#~ msgstr "ଆପଣଙ୍କର ପରଦା ସଂରକ୍ଷକ ପସନ୍ଦଗୁଡିକୁ ସ୍ଥିର କରନ୍ତୁ"
diff --git a/po/pt.po b/po/pt.po
index 55c8512..27d092f 100644
--- a/po/pt.po
+++ b/po/pt.po
@@ -2,48 +2,50 @@
# Copyright © 2006, 2007, 2008, 2009, 2010, 2011 gnome-screensaver
# This file is distributed under the same license as the gnome-screensaver package.
# Duarte Loreto <happyguy_pt@hotmail.com>, 2006, 2007, 2008, 2009, 2010, 2011.
-#
+# Pedro Albuquerque <palbuquerque73@gmail.com>, 2015.
msgid ""
msgstr ""
"Project-Id-Version: 3.0\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-03-16 00:17+0000\n"
-"PO-Revision-Date: 2011-03-16 00:25+0000\n"
-"Last-Translator: Duarte Loreto <happyguy_pt@hotmail.com>\n"
-"Language-Team: Portuguese <gnome_pt@yahoogroups.com>\n"
+"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-"
+"screensaver&keywords=I18N+L10N&component=general\n"
+"POT-Creation-Date: 2015-11-17 21:58+0000\n"
+"PO-Revision-Date: 2015-11-18 07:11+0100\n"
+"Last-Translator: Pedro Albuquerque <palbuquerque73@gmail.com>\n"
+"Language-Team: Pedro Albuquerque\n"
"Language: pt\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"X-Generator: Virtaal 0.7.1\n"
+"X-Project-Style: gnome\n"
#: ../src/gnome-screensaver-command.c:46
msgid "Causes the screensaver to exit gracefully"
-msgstr "Força o protector de ecrã a terminar graciosamente"
+msgstr "Força o protetor de ecrã a terminar graciosamente"
#: ../src/gnome-screensaver-command.c:48
msgid "Query the state of the screensaver"
-msgstr "Consulta o estado o protector de ecrã"
+msgstr "Consulta o estado o protetor de ecrã"
#: ../src/gnome-screensaver-command.c:50
msgid "Query the length of time the screensaver has been active"
-msgstr "Consultar à quanto tempo o protector de ecrã está activo"
+msgstr "Consultar à quanto tempo o protetor de ecrã está ativo"
#: ../src/gnome-screensaver-command.c:52
msgid "Tells the running screensaver process to lock the screen immediately"
msgstr ""
-"Indica ao processo de protecção de ecrã em execução para trancar o ecrã "
+"Indica ao processo de proteção de ecrã em execução para trancar o ecrã "
"imediatamente"
#: ../src/gnome-screensaver-command.c:54
msgid "Turn the screensaver on (blank the screen)"
-msgstr "Activar a protecção de ecrã (ecrã preto)"
+msgstr "Ativar a proteção de ecrã (ecrã preto)"
#: ../src/gnome-screensaver-command.c:56
msgid "If the screensaver is active then deactivate it (un-blank the screen)"
msgstr ""
-"Se a protecção de ecrã estiver activa, desactivá-la (ecrã deixa de estar "
-"preto)"
+"Se a proteção de ecrã estiver ativa, desativá-la (ecrã deixa de estar preto)"
#: ../src/gnome-screensaver-command.c:58 ../src/gnome-screensaver-dialog.c:59
#: ../src/gnome-screensaver.c:56
@@ -53,44 +55,44 @@ msgstr "Versão desta aplicação"
#: ../src/gnome-screensaver-command.c:224
#, c-format
msgid "The screensaver is active\n"
-msgstr "O protector de ecrã está activado\n"
+msgstr "O protetor de ecrã está ativado\n"
#: ../src/gnome-screensaver-command.c:226
#, c-format
msgid "The screensaver is inactive\n"
-msgstr "O protector de ecrã está desactivado\n"
+msgstr "O protetor de ecrã está desativado\n"
#: ../src/gnome-screensaver-command.c:256
#, c-format
msgid "The screensaver has been active for %d second.\n"
msgid_plural "The screensaver has been active for %d seconds.\n"
-msgstr[0] "O protector de ecrã está activo há %d segundo.\n"
-msgstr[1] "O protector de ecrã está activo há %d segundos.\n"
+msgstr[0] "O protetor de ecrã está ativo há %d segundo.\n"
+msgstr[1] "O protetor de ecrã está ativo há %d segundos.\n"
#: ../src/gnome-screensaver-command.c:258
#, c-format
msgid "The screensaver is not currently active.\n"
-msgstr "O protector de ecrã actualmente não está activo.\n"
+msgstr "O protetor de ecrã atualmente não está ativo.\n"
#: ../src/gnome-screensaver-dialog.c:57
msgid "Show debugging output"
-msgstr "Apresentar resultados da depuração"
+msgstr "Mostrar resultados da depuração"
#: ../src/gnome-screensaver-dialog.c:61
msgid "Show the logout button"
-msgstr "Apresentar o botão de terminar sessão"
+msgstr "Mostrar o botão de fim de sessão"
#: ../src/gnome-screensaver-dialog.c:63
msgid "Command to invoke from the logout button"
-msgstr "Comando a invocar pelo botão de terminar sessão"
+msgstr "Comando a invocar pelo botão de fim de sessão"
#: ../src/gnome-screensaver-dialog.c:65
msgid "Show the switch user button"
-msgstr "Apresentar o botão de alternar utilizador"
+msgstr "Mostrar o botão de alternar utilizador"
#: ../src/gnome-screensaver-dialog.c:67
msgid "Message to show in the dialog"
-msgstr "Mensagem a apresentar no diálogo"
+msgstr "Mensagem a mostrar no diálogo"
#. Translators: This is the example input for the --status-message command line option.
#. Translators: This is the example input for the --away-message command line option.
@@ -100,7 +102,7 @@ msgstr "MENSAGEM"
#: ../src/gnome-screensaver-dialog.c:71
msgid "Not used"
-msgstr "Não está em utilização"
+msgstr "Não usado"
#. login: is whacked always translate to Username:
#: ../src/gnome-screensaver-dialog.c:183 ../src/gnome-screensaver-dialog.c:184
@@ -135,19 +137,19 @@ msgstr "Senha inalterada"
#: ../src/gnome-screensaver-dialog.c:193
msgid "Cannot get username"
-msgstr "Incapaz de obter o nome de utilizador"
+msgstr "Impossível obter o nome de utilizador"
#: ../src/gnome-screensaver-dialog.c:194
msgid "Retype new Unix password:"
-msgstr "Reintroduza a nova senha Unix:"
+msgstr "Reinsira a nova senha Unix:"
#: ../src/gnome-screensaver-dialog.c:195
msgid "Enter new Unix password:"
-msgstr "Introduza a nova senha Unix:"
+msgstr "Insira a nova senha Unix:"
#: ../src/gnome-screensaver-dialog.c:196
msgid "(current) Unix password:"
-msgstr "Senha Unix (actual):"
+msgstr "Senha Unix (atual):"
#: ../src/gnome-screensaver-dialog.c:197
msgid "Error while changing NIS password."
@@ -159,7 +161,7 @@ msgstr "Tem de escolher uma senha maior"
#: ../src/gnome-screensaver-dialog.c:199
msgid "Password has been already used. Choose another."
-msgstr "A senha já foi utilizada anteriormente. Seleccione outra."
+msgstr "A senha já foi utilizada anteriormente. Selecione outra."
#: ../src/gnome-screensaver-dialog.c:200
msgid "You must wait longer to change your password"
@@ -167,11 +169,11 @@ msgstr "Tem de aguardar mais tempo antes de poder alterar a sua senha"
#: ../src/gnome-screensaver-dialog.c:201
msgid "Sorry, passwords do not match"
-msgstr "As senhas não coincidem"
+msgstr "Desculpe, as senhas não coincidem"
#: ../src/gnome-screensaver-dialog.c:267
msgid "Checking…"
-msgstr "A Verificar…"
+msgstr "A verificar…"
#: ../src/gnome-screensaver-dialog.c:309 ../src/gs-auth-pam.c:457
msgid "Authentication failed."
@@ -183,29 +185,29 @@ msgstr "Não executar como daemon"
#: ../src/gnome-screensaver.c:58
msgid "Enable debugging code"
-msgstr "Activar a depuração de código"
+msgstr "Ativar a depuração de código"
#: ../src/gnome-screensaver.desktop.in.in.h:1
-msgid "Launch screensaver and locker program"
-msgstr "Iniciar o protector de ecrã e a aplicação de trancar"
+msgid "Screensaver"
+msgstr "Proteção de ecrã"
#: ../src/gnome-screensaver.desktop.in.in.h:2
-msgid "Screensaver"
-msgstr "Protecção de Ecrã"
+msgid "Launch screensaver and locker program"
+msgstr "Iniciar o protetor de ecrã e a aplicação de trancar"
#: ../src/gs-auth-pam.c:397
#, c-format
msgid "Unable to establish service %s: %s\n"
-msgstr "Incapaz de estabelecer o serviço %s: %s\n"
+msgstr "Impossível estabelecer o serviço %s: %s\n"
#: ../src/gs-auth-pam.c:423
#, c-format
msgid "Can't set PAM_TTY=%s"
-msgstr "Incapaz de definir PAM_TTY=%s"
+msgstr "Impossível definir PAM_TTY=%s"
#: ../src/gs-auth-pam.c:455
msgid "Incorrect password."
-msgstr "Senha incorrecta."
+msgstr "Senha incorreta."
#: ../src/gs-auth-pam.c:471
msgid "Not permitted to gain access at this time."
@@ -215,59 +217,53 @@ msgstr "Não lhe é permitido obter acesso neste momento."
msgid "No longer permitted to access the system."
msgstr "Já não lhe é mais permitido aceder ao sistema."
-#: ../src/gs-listener-dbus.c:1148
+#: ../src/gs-listener-dbus.c:1284
msgid "failed to register with the message bus"
-msgstr "falha ao se registar no bus de mensagens"
+msgstr "falha ao registar no bus de mensagens"
-#: ../src/gs-listener-dbus.c:1158
+#: ../src/gs-listener-dbus.c:1294
msgid "not connected to the message bus"
-msgstr "não se encontra ligado ao bus de mensagens"
+msgstr "não ligado ao bus de mensagens"
-#: ../src/gs-listener-dbus.c:1167 ../src/gs-listener-dbus.c:1197
+#: ../src/gs-listener-dbus.c:1303 ../src/gs-listener-dbus.c:1333
msgid "screensaver already running in this session"
-msgstr "protecção de ecrã já se encontra em execução nesta sessão"
+msgstr "proteção de ecrã já se encontra em execução nesta sessão"
-#: ../src/gs-lock-plug.c:256
+#: ../src/gs-lock-plug.c:255
msgid "Time has expired."
-msgstr "Tempo expirou."
+msgstr "O tempo expirou."
-#: ../src/gs-lock-plug.c:287
-msgid "You have the Caps & Num Lock keys on."
-msgstr "Tem as teclas Caps & Num Lock activas."
-
-#: ../src/gs-lock-plug.c:290
+#: ../src/gs-lock-plug.c:286
msgid "You have the Caps Lock key on."
-msgstr "Tem a tecla Caps Lock activa."
-
-#: ../src/gs-lock-plug.c:293
-msgid "You have the Num Lock key on."
-msgstr "Tem a tecla Num Lock activa."
+msgstr "Tem a tecla Caps Lock ativa."
#: ../src/gs-lock-plug.c:1350
msgid "S_witch User…"
-msgstr "_Alternar Utilizador…"
+msgstr "_Alternar utilizador…"
#: ../src/gs-lock-plug.c:1359
msgid "Log _Out"
-msgstr "_Terminar a Sessão"
+msgstr "_Terminar a sessão"
#: ../src/gs-lock-plug.c:1366
msgid "_Unlock"
msgstr "_Destrancar"
-#: ../src/gs-lock-plug.c:1401
+#: ../src/gs-lock-plug.c:1405
msgid "_Password:"
msgstr "_Senha:"
-#. Translators, this is the 24h date format used in the panel clock
-#: ../src/gs-window-x11.c:2199
-msgid "%a %R"
-msgstr "%a %R"
+#~ msgid "You have the Caps & Num Lock keys on."
+#~ msgstr "Tem as teclas Caps & Num Lock activas."
+
+#~ msgid "You have the Num Lock key on."
+#~ msgstr "Tem a tecla Num Lock activa."
+
+#~ msgid "%a %R"
+#~ msgstr "%a %R"
-#. Translators, this is the 12h date format used in the panel clock
-#: ../src/gs-window-x11.c:2202
-msgid "%a %l:%M %p"
-msgstr "%a %l:%M %p"
+#~ msgid "%a %l:%M %p"
+#~ msgstr "%a %l:%M %p"
#~ msgid "Set your screensaver preferences"
#~ msgstr "Defina as suas preferências de protecção de ecrã"
diff --git a/po/pt_BR.po b/po/pt_BR.po
index c223ff7..d8976a4 100644
--- a/po/pt_BR.po
+++ b/po/pt_BR.po
@@ -8,22 +8,23 @@
# Vladimir Melo <vladimirmelo@foresightlinux.org>, 2008.
# André Gondim <andregondim@ubuntu.com>, 2009.
# Krix Apolinário <krixapolinario@gmail.com>, 2009.
-# Antonio Fernandes C. Neto <fernandes@pelivre.org>, 2010.
+# Antonio Fernandes C. Neto <fernandesn@gnome.org>, 2010, 2013.
#
msgid ""
msgstr ""
"Project-Id-Version: gnome-screensaver\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-03-27 17:40-0400\n"
-"PO-Revision-Date: 2011-03-25 21:40-0300\n"
-"Last-Translator: Rodrigo Padula de Oliveira <contato@rodrigopadula.com>\n"
+"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-"
+"screensaver&keywords=I18N+L10N&component=general\n"
+"POT-Creation-Date: 2013-03-21 15:51+0000\n"
+"PO-Revision-Date: 2013-09-18 15:55-0300\n"
+"Last-Translator: Antonio Fernandes C. Neto <fernandesn@gnome.org>\n"
"Language-Team: Brazilian Portuguese <gnome-pt_br-list@gnome.org>\n"
+"Language: pt_BR\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Poedit-Language: Portuguese\n"
-"X-Poedit-Country: Brazil\n"
+"X-Generator: Poedit 1.5.7\n"
#: ../src/gnome-screensaver-command.c:46
msgid "Causes the screensaver to exit gracefully"
@@ -123,7 +124,8 @@ msgstr "Você precisa alterar sua senha imediatamente (a senha expirou)"
#: ../src/gnome-screensaver-dialog.c:189
msgid "You are required to change your password immediately (root enforced)"
-msgstr "Você precisa alterar sua senha imediatamente (determinação do root)"
+msgstr ""
+"Você precisa alterar sua senha imediatamente (determinação do administrador)"
#: ../src/gnome-screensaver-dialog.c:190
msgid "Your account has expired; please contact your system administrator"
@@ -190,13 +192,13 @@ msgid "Enable debugging code"
msgstr "Habilitar depuração de código"
#: ../src/gnome-screensaver.desktop.in.in.h:1
-msgid "Launch screensaver and locker program"
-msgstr "Executa o protetor de tela e bloqueia programa"
-
-#: ../src/gnome-screensaver.desktop.in.in.h:2
msgid "Screensaver"
msgstr "Proteção de tela"
+#: ../src/gnome-screensaver.desktop.in.in.h:2
+msgid "Launch screensaver and locker program"
+msgstr "Executa o protetor de tela e bloqueia programa"
+
#: ../src/gs-auth-pam.c:397
#, c-format
msgid "Unable to establish service %s: %s\n"
@@ -219,34 +221,26 @@ msgstr "Dessa vez o acesso não é permitido."
msgid "No longer permitted to access the system."
msgstr "Não é mais permitido ter acesso ao sistema."
-#: ../src/gs-listener-dbus.c:1148
+#: ../src/gs-listener-dbus.c:1284
msgid "failed to register with the message bus"
msgstr "falha ao registrar no barramento de mensagens"
-#: ../src/gs-listener-dbus.c:1158
+#: ../src/gs-listener-dbus.c:1294
msgid "not connected to the message bus"
msgstr "não conectado ao barramento de mensagens"
-#: ../src/gs-listener-dbus.c:1167 ../src/gs-listener-dbus.c:1197
+#: ../src/gs-listener-dbus.c:1303 ../src/gs-listener-dbus.c:1333
msgid "screensaver already running in this session"
msgstr "proteção de tela já ativa nesta sessão"
-#: ../src/gs-lock-plug.c:256
+#: ../src/gs-lock-plug.c:255
msgid "Time has expired."
msgstr "Tempo expirado."
-#: ../src/gs-lock-plug.c:287
-msgid "You have the Caps & Num Lock keys on."
-msgstr "As teclas Caps e Num Lock estão ativadas."
-
-#: ../src/gs-lock-plug.c:290
+#: ../src/gs-lock-plug.c:286
msgid "You have the Caps Lock key on."
msgstr "A tecla Caps Lock está ativada."
-#: ../src/gs-lock-plug.c:293
-msgid "You have the Num Lock key on."
-msgstr "A tecla Num Lock está ativada."
-
#: ../src/gs-lock-plug.c:1350
msgid "S_witch User…"
msgstr "_Trocar de usuário…"
@@ -259,19 +253,21 @@ msgstr "_Encerrar sessão"
msgid "_Unlock"
msgstr "_Desbloquear"
-#: ../src/gs-lock-plug.c:1401
+#: ../src/gs-lock-plug.c:1405
msgid "_Password:"
msgstr "_Senha:"
-#. Translators, this is the 24h date format used in the panel clock
-#: ../src/gs-window-x11.c:2199
-msgid "%a %R"
-msgstr "%a %R"
+#~ msgid "You have the Caps & Num Lock keys on."
+#~ msgstr "As teclas Caps e Num Lock estão ativadas."
+
+#~ msgid "You have the Num Lock key on."
+#~ msgstr "A tecla Num Lock está ativada."
+
+#~ msgid "%a %R"
+#~ msgstr "%a %R"
-#. Translators, this is the 12h date format used in the panel clock
-#: ../src/gs-window-x11.c:2202
-msgid "%a %l:%M %p"
-msgstr "%a %l:%M %p"
+#~ msgid "%a %l:%M %p"
+#~ msgstr "%a %l:%M %p"
#~ msgid "Set your screensaver preferences"
#~ msgstr "Defina suas preferências de proteção de tela"
diff --git a/po/sk.po b/po/sk.po
index a7b5b5c..9fa311a 100644
--- a/po/sk.po
+++ b/po/sk.po
@@ -1,719 +1,222 @@
# Slovak translation for gnome-screensaver.
-# Copyright (C) 2005, 2007, 2008, 2010 Free Software Foundation, Inc.
+# Copyright (C) 2005, 2007, 2008, 2010, 2012 Free Software Foundation, Inc.
# This file is distributed under the same license as the gnome-screensaver package.
# Peter Tuharsky <tuharsky@misbb.sk>, 2007.
# Marcel Telka <marcel@telka.sk>, 2005, 2008, 2010.
+# Dušan Kazik <prescott66@gmail.com>, 2012
#
msgid ""
msgstr ""
"Project-Id-Version: gnome-screensaver\n"
"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-"
-"screensaver&component=general\n"
-"POT-Creation-Date: 2010-02-26 10:06+0000\n"
-"PO-Revision-Date: 2010-02-26 14:28+0100\n"
-"Last-Translator: Marcel Telka <marcel@telka.sk>\n"
+"screensaver&keywords=I18N+L10N&component=general\n"
+"POT-Creation-Date: 2012-10-22 15:20+0000\n"
+"PO-Revision-Date: 2012-11-16 18:26+0000\n"
+"Last-Translator: Dušan Kazik <prescott66@gmail.com>\n"
"Language-Team: Slovak <gnome-sk-list@gnome.org>\n"
+"Language: sk\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 1 : (n>=2 && n<=4) ? 2 : 0;\n"
+"X-Generator: Poedit 1.5.4\n"
-#: ../data/gnome-screensaver-preferences.desktop.in.h:1
-#: ../src/gnome-screensaver.desktop.in.in.h:2
-msgid "Screensaver"
-msgstr "Šetrič obrazovky"
-
-#: ../data/gnome-screensaver-preferences.desktop.in.h:2
-msgid "Set your screensaver preferences"
-msgstr "Nastaviť predvoľby vášho šetriča obrazovky"
-
-#: ../data/gnome-screensaver-preferences.ui.h:1
-msgid "<b>Screensaver preview</b>"
-msgstr "<b>Ukážka šetriča obrazovky</b>"
-
-#: ../data/gnome-screensaver-preferences.ui.h:2
-msgid "<b>Warning: the screen will not be locked for the root user.</b>"
-msgstr "<b>Upozornenie: obrazovka sa nezamkne pre používateľa root.</b>"
-
-#: ../data/gnome-screensaver-preferences.ui.h:3
-msgid "Power _Management"
-msgstr "Správa _napájania"
-
-#: ../data/gnome-screensaver-preferences.ui.h:4
-msgid "Regard the computer as _idle after:"
-msgstr "Považovať počítač za neč_inný po:"
-
-#: ../data/gnome-screensaver-preferences.ui.h:5
-msgid "Screensaver Preferences"
-msgstr "Predvoľby šetriča obrazovky"
-
-#: ../data/gnome-screensaver-preferences.ui.h:6
-msgid "Screensaver Preview"
-msgstr "Ukážka šetriča obrazovky"
-
-#: ../data/gnome-screensaver-preferences.ui.h:7
-msgid "_Activate screensaver when computer is idle"
-msgstr "_Aktivovať šetrič obrazovky keď je počítač nečinný"
-
-#: ../data/gnome-screensaver-preferences.ui.h:8
-msgid "_Lock screen when screensaver is active"
-msgstr "_Uzamknúť obrazovku keď je aktívny šetrič obrazovky"
-
-#: ../data/gnome-screensaver-preferences.ui.h:9
-msgid "_Preview"
-msgstr "_Ukážka"
-
-#: ../data/gnome-screensaver-preferences.ui.h:10
-msgid "_Screensaver theme:"
-msgstr "_Téma šetriča obrazovky:"
-
-#: ../data/gnome-screensaver.directory.in.h:1
-#: ../data/gnome-screensaver.schemas.in.h:11
-msgid "Screensaver themes"
-msgstr "Témy šetriča obrazovky"
-
-#: ../data/gnome-screensaver.directory.in.h:2
-msgid "Screensavers"
-msgstr "Šetriče obrazovky"
-
-#: ../data/gnome-screensaver.schemas.in.h:1
-msgid "Activate when idle"
-msgstr "Aktivovať pri nečinnosti"
-
-#: ../data/gnome-screensaver.schemas.in.h:2
-msgid "Allow embedding a keyboard into the window"
-msgstr "Povoliť zabudovanie klávesnice do okna"
-
-#: ../data/gnome-screensaver.schemas.in.h:3
-msgid "Allow logout"
-msgstr "Povoliť odhlásenie"
-
-#: ../data/gnome-screensaver.schemas.in.h:4
-msgid "Allow the session status message to be displayed"
-msgstr "Povoliť zobrazenie správy o stave relácie"
-
-#: ../data/gnome-screensaver.schemas.in.h:5
-msgid ""
-"Allow the session status message to be displayed when the screen is locked."
-msgstr "Povoliť zobrazenie správy o stave relácie, keď je obrazovka uzamknutá."
-
-#: ../data/gnome-screensaver.schemas.in.h:6
-msgid "Allow user switching"
-msgstr "Povoliť prepnutie používateľa"
-
-#: ../data/gnome-screensaver.schemas.in.h:7
-msgid "Embedded keyboard command"
-msgstr "Príkaz zabudovanej klávesnice"
-
-#: ../data/gnome-screensaver.schemas.in.h:8
-msgid "Lock on activation"
-msgstr "Uzamknúť pri aktivácii"
-
-#: ../data/gnome-screensaver.schemas.in.h:9
-msgid "Logout command"
-msgstr "Príkaz pre odhlásenie"
-
-#: ../data/gnome-screensaver.schemas.in.h:10
-msgid "Screensaver theme selection mode"
-msgstr "Režim výberu šetriča obrazovky"
-
-#: ../data/gnome-screensaver.schemas.in.h:12
-msgid "Set this to TRUE to activate the screensaver when the session is idle."
-msgstr ""
-"Nastavte toto na TRUE, ak sa má pri nečinnosti relácie aktivovať šetrič "
-"obrazovky."
-
-#: ../data/gnome-screensaver.schemas.in.h:13
-msgid ""
-"Set this to TRUE to allow embedding a keyboard into the window when trying "
-"to unlock. The \"keyboard_command\" key must be set with the appropriate "
-"command."
-msgstr ""
-"Nastavte toto na TRUE, ak chcete umožniť zabudovanie klávesnice do okna pri "
-"pokuse o odomknutie. Kľúč \"keyboard_command\" musí byť obsahovať príslušný "
-"príkaz."
-
-#: ../data/gnome-screensaver.schemas.in.h:14
-msgid "Set this to TRUE to lock the screen when the screensaver goes active."
-msgstr ""
-"Nastavte toto na TRUE, ak sa má pri aktivovaní šetriča obrazovky uzamknúť "
-"obrazovka."
-
-#: ../data/gnome-screensaver.schemas.in.h:15
-msgid ""
-"Set this to TRUE to offer an option in the unlock dialog to switch to a "
-"different user account."
-msgstr ""
-"Nastavte toto na TRUE, aby sa ponúkala možnosť prepnutia na iný "
-"používateľský účet v odomykacom dialógovom okne."
-
-#: ../data/gnome-screensaver.schemas.in.h:16
-msgid ""
-"Set this to TRUE to offer an option in unlock dialog to logging out after a "
-"delay. The Delay is specified in the \"logout_delay\" key."
-msgstr ""
-"Nastavte toto na TRUE, aby sa ponúkala možnosť odhlásenia po vypršaní lehoty "
-"v odomykacom dialógovom okne. Dĺžka trvania lehoty sa nastavuje v kľúči "
-"\"logout_delay\"."
-
-#: ../data/gnome-screensaver.schemas.in.h:17
-msgid ""
-"The command that will be run, if the \"embedded_keyboard_enabled\" key is "
-"set to TRUE, to embed a keyboard widget into the window. This command should "
-"implement an XEMBED plug interface and output a window XID on the standard "
-"output."
-msgstr ""
-"Príkaz, ktorý sa spustí, ak je kľúč \"embedded_keyboard_enabled\" nastavený "
-"na TRUE, na zabudovanie prvku klávesnice do okna. Tento príkaz musí "
-"implementovať XEMBED zásuvné rozhranie a poslať XID okna na štandardný "
-"výstup."
-
-#: ../data/gnome-screensaver.schemas.in.h:18
-msgid ""
-"The command to invoke when the logout button is clicked. This command should "
-"simply log the user out without any interaction. This key has effect only if "
-"the \"logout_enable\" key is set to TRUE."
-msgstr ""
-"Príkaz, ktorý sa vyvolá po kliknutí na tlačidlo odhlásenia. Tento príkaz "
-"musí jednoducho odhlásiť používateľa bez akýchkoľvek otázok. Tento kľúč je "
-"účinný iba ak je kľúč \"logout_enable\" nastavený na TRUE."
-
-#: ../data/gnome-screensaver.schemas.in.h:19
-msgid ""
-"The number of minutes after screensaver activation before locking the screen."
-msgstr "Počet minút od aktivácie šetriča obrazovky po zamknutie obrazovky."
-
-#: ../data/gnome-screensaver.schemas.in.h:20
-msgid ""
-"The number of minutes after the screensaver activation before a logout "
-"option will appear in unlock dialog. This key has effect only if the "
-"\"logout_enable\" key is set to TRUE."
-msgstr ""
-"Počet minút od aktivácii šetriča obrazovky po zobrazenie možnosti odhlásenia "
-"v odomykacom dialógovom okne. Tento kľúč je účinný iba ak je kľúč "
-"\"logout_enable\" nastavený na TRUE."
-
-#: ../data/gnome-screensaver.schemas.in.h:21
-msgid ""
-"The number of minutes of inactivity before the session is considered idle."
-msgstr "Počet minút nečinnosti kým sa relácia začne považovať za nečinnú."
-
-#: ../data/gnome-screensaver.schemas.in.h:22
-msgid "The number of minutes to run before changing the screensaver theme."
-msgstr "Počet minút behu, kým sa zmení téma šetriča obrazovky."
-
-#: ../data/gnome-screensaver.schemas.in.h:23
-msgid ""
-"The number of seconds of inactivity before signalling to power-management. "
-"This key is set and maintained by the session power-management agent."
-msgstr ""
-"Počet sekúnd nečinnosti, kým sa odošle signál správe napájania. Tento kľúč "
-"nastavuje agent správy napájania relácie."
-
-#: ../data/gnome-screensaver.schemas.in.h:24
-msgid ""
-"The selection mode used by screensaver. May be \"blank-only\" to enable the "
-"screensaver without using any theme on activation, \"single\" to enable "
-"screensaver using only one theme on activation (specified in \"themes\" "
-"key), and \"random\" to enable the screensaver using a random theme on "
-"activation."
-msgstr ""
-"Výberový režim šetriča obrazovky. \"blank-only\" povolí spustenie šetriča "
-"bez akejkoľvek témy, \"single\" povolí šetrič s jedinou témou (označenou v "
-"kľúči \"themes\"), a \"random\" povolí šetrič s náhodným výberom témy."
-
-#: ../data/gnome-screensaver.schemas.in.h:25
-msgid "Theme for lock dialog"
-msgstr "Téma pre dialógové okno uzamknutia"
-
-#: ../data/gnome-screensaver.schemas.in.h:26
-msgid "Theme to use for the lock dialog."
-msgstr "Téma pre dialógové okno uzamknutia."
-
-#: ../data/gnome-screensaver.schemas.in.h:27
-msgid ""
-"This key specifies the list of themes to be used by the screensaver. It's "
-"ignored when \"mode\" key is \"blank-only\", should provide the theme name "
-"when \"mode\" is \"single\", and should provide a list of themes when \"mode"
-"\" is \"random\"."
-msgstr ""
-"Tento kľúč určuje zoznam tém, ktoré má šetrič orazovky používať. Ignoruje "
-"sa, ak je kľúč \"mode\" nastavený na \"blank-only\", ináč by mal uvádzať "
-"meno témy ak \"mode\" je \"single\", alebo zoznam tém keď \"mode\" je "
-"\"random\"."
-
-#: ../data/gnome-screensaver.schemas.in.h:28
-msgid "Time before locking"
-msgstr "Čas pred uzamknutím"
-
-#: ../data/gnome-screensaver.schemas.in.h:29
-msgid "Time before logout option"
-msgstr "Čas pred možnosťou odhlásenia"
-
-#: ../data/gnome-screensaver.schemas.in.h:30
-msgid "Time before power-management baseline"
-msgstr "Čas pred základom správy napájania"
-
-#: ../data/gnome-screensaver.schemas.in.h:31
-msgid "Time before session is considered idle"
-msgstr "Čas pred tým, než je relácia považovaná za nečinnú"
-
-#: ../data/gnome-screensaver.schemas.in.h:32
-msgid "Time before theme change"
-msgstr "Čas pred zmenou témy"
-
-#: ../data/lock-dialog-default.ui.h:2
-#, no-c-format
-msgid "<b>Leave a message for %R:</b>"
-msgstr "<b>Zanechať správu pre %R:</b>"
-
-#: ../data/lock-dialog-default.ui.h:4
-#, no-c-format
-msgid "<span size=\"small\">%U on %h</span>"
-msgstr "<span size=\"small\">%U na %h</span>"
-
-#: ../data/lock-dialog-default.ui.h:6
-#, no-c-format
-msgid "<span size=\"x-large\">%R</span>"
-msgstr "<span size=\"x-large\">%R</span>"
-
-#: ../data/lock-dialog-default.ui.h:7
-msgid "_Cancel"
-msgstr "_Zrušiť"
-
-#: ../data/lock-dialog-default.ui.h:8
-msgid "_Leave Message"
-msgstr "_Zanechať správu"
-
-#: ../data/lock-dialog-default.ui.h:9
-msgid "_Log Out"
-msgstr "_Odhlásiť"
-
-#: ../data/lock-dialog-default.ui.h:10
-msgid "_Switch User"
-msgstr "_Prepnúť používateľa"
-
-#: ../data/lock-dialog-default.ui.h:11 ../src/gs-lock-plug.c:1372
-msgid "_Unlock"
-msgstr "_Odomknúť"
-
-#. Translators: This is the name of a desktop background image that shows outer space images.
-#. You might want to translate it into the equivalent words of your language
-#: ../data/images/cosmos/cosmos.xml.in.in.h:3
-#: ../savers/cosmos-slideshow.desktop.in.in.h:1
-msgid "Cosmos"
-msgstr "Vesmír"
-
-#: ../savers/cosmos-slideshow.desktop.in.in.h:2
-msgid "Display a slideshow of pictures of the cosmos"
-msgstr "Zobraziť prezentáciu z obrázkov vesmíru"
-
-#: ../savers/footlogo-floaters.desktop.in.in.h:1
-msgid "Bubbles the GNOME foot logo around the screen"
-msgstr "Vybublinkuje logo nohy GNOME okolo obrazovky"
-
-#: ../savers/footlogo-floaters.desktop.in.in.h:2
-msgid "Floating Feet"
-msgstr "Plávajúce nohy"
-
-#: ../savers/personal-slideshow.desktop.in.in.h:1
-msgid "Display a slideshow from your Pictures folder"
-msgstr "Zobraziť prezentáciu z vášho priečinka obrázkov"
-
-#: ../savers/personal-slideshow.desktop.in.in.h:2
-msgid "Pictures folder"
-msgstr "Priečinok s obrázkami"
-
-#: ../savers/popsquares.desktop.in.in.h:1
-msgid "A pop-art-ish grid of pulsing colors."
-msgstr "Pop-artistická matica pulzujúcich farieb"
-
-#: ../savers/popsquares.desktop.in.in.h:2
-msgid "Pop art squares"
-msgstr "Pop-artistické štvorce"
-
-#: ../savers/popsquares.c:49 ../savers/floaters.c:1204
-#, c-format
-msgid "%s. See --help for usage information.\n"
-msgstr "%s. Ak chcete informácie o používaní, pozrite --help.\n"
-
-#: ../savers/floaters.c:88
-msgid "Show paths that images follow"
-msgstr "Zobraziť cesty ktoré sledujú obrázky"
-
-#: ../savers/floaters.c:91
-msgid "Occasionally rotate images as they move"
-msgstr "Občas otočiť obrázky počas pohybu"
-
-#: ../savers/floaters.c:94
-msgid "Print out frame rate and other statistics"
-msgstr "Zobraziť počet snímok za sekundu a iné štatistiky"
-
-#: ../savers/floaters.c:97
-msgid "The maximum number of images to keep on screen"
-msgstr "Maximálny počet obrázkov, ktoré ponechať na obrazovke"
-
-#: ../savers/floaters.c:97
-msgid "MAX_IMAGES"
-msgstr "MAX_OBRÁZKOV"
-
-#: ../savers/floaters.c:100
-msgid "The initial size and position of window"
-msgstr "Úvodná veľkosť a umiestnenie okna"
-
-#: ../savers/floaters.c:100
-msgid "WIDTHxHEIGHT+X+Y"
-msgstr "WIDTHxHEIGHT+X+Y"
-
-#: ../savers/floaters.c:103
-msgid "The source image to use"
-msgstr "Zdrojový obrázok, ktorý použiť"
-
-#. translators: the word "image" here
-#. * represents a command line argument
-#.
-#: ../savers/floaters.c:1198
-msgid "image - floats images around the screen"
-msgstr "image - obrázky plávajú po obrazovke"
-
-#: ../savers/floaters.c:1213
-#, c-format
-msgid "You must specify one image. See --help for usage information.\n"
-msgstr ""
-"Musíte zadať jeden obrázok. Informácie o používaní nájdete pomocou --help.\n"
-
-#: ../savers/slideshow.c:53
-msgid "Location to get images from"
-msgstr "Umiestnenie, odkiaľ získať obrázky"
-
-#: ../savers/slideshow.c:53
-msgid "PATH"
-msgstr "CESTA"
-
-#: ../savers/slideshow.c:55
-msgid "Color to use for images background"
-msgstr "Farba pozadia obrázkov"
-
-#: ../savers/slideshow.c:55
-msgid "\"#rrggbb\""
-msgstr "\"#rrggbb\""
-
-#: ../savers/slideshow.c:57
-msgid "Do not randomize pictures from location"
-msgstr "Obrázky z miesta nepúšťať náhodne"
-
-#: ../savers/slideshow.c:59
-msgid "Do not try to stretch images on screen"
-msgstr "Nepokúšať sa natiahnuť obrázky na obrazovke"
-
-#: ../src/copy-theme-dialog.c:212
-msgid "Copying files"
-msgstr "Kopírujú sa súbory"
-
-#: ../src/copy-theme-dialog.c:230
-msgid "From:"
-msgstr "Odkiaľ:"
-
-#: ../src/copy-theme-dialog.c:234
-msgid "To:"
-msgstr "Kam:"
-
-#: ../src/copy-theme-dialog.c:254
-msgid "Copying themes"
-msgstr "Kopírujú sa témy"
-
-#: ../src/copy-theme-dialog.c:298
-msgid "Invalid screensaver theme"
-msgstr "Neplatná téma šetriča obrazovky"
-
-#: ../src/copy-theme-dialog.c:301
-#, c-format
-msgid "%s does not appear to be a valid screensaver theme."
-msgstr "%s nevyzerá ako platná téma šetriča obrazovky."
-
-#: ../src/copy-theme-dialog.c:481
-#, c-format
-msgid "Copying file: %u of %u"
-msgstr "Kopíruje sa súbor: %u z %u"
-
-#: ../src/gnome-screensaver-command.c:62
+# cmd desc
+#: ../src/gnome-screensaver-command.c:46
msgid "Causes the screensaver to exit gracefully"
msgstr "Spôsobí korektné ukončenie šetriča obrazovky"
-#: ../src/gnome-screensaver-command.c:64
+# cmd desc
+#: ../src/gnome-screensaver-command.c:48
msgid "Query the state of the screensaver"
-msgstr "Zistiť stav šetriča obrazovky"
+msgstr "Zistí stav šetriča obrazovky"
-#: ../src/gnome-screensaver-command.c:66
+# cmd desc
+#: ../src/gnome-screensaver-command.c:50
msgid "Query the length of time the screensaver has been active"
-msgstr "Zistiť dobu aktivity šetriča obrazovky"
+msgstr "Zistí dobu aktivity šetriča obrazovky"
-#: ../src/gnome-screensaver-command.c:68
+# cmd desc
+#: ../src/gnome-screensaver-command.c:52
msgid "Tells the running screensaver process to lock the screen immediately"
msgstr "Požiada bežiaci šetrič obrazovky, aby okamžite uzamkol obrazovku"
-#: ../src/gnome-screensaver-command.c:70
-msgid "If the screensaver is active then switch to another graphics demo"
-msgstr "Ak je šetrič obrazovky aktívny, tak prepnúť na iné grafickú ukážku"
-
-#: ../src/gnome-screensaver-command.c:72
+# cmd desc
+#: ../src/gnome-screensaver-command.c:54
msgid "Turn the screensaver on (blank the screen)"
-msgstr "Zapnúť šetrič obrazovky (vyprázdniť obrazovku)"
+msgstr "Zapne šetrič obrazovky (vyprázdni sa obrazovka)"
-#: ../src/gnome-screensaver-command.c:74
+# cmd desc
+#: ../src/gnome-screensaver-command.c:56
msgid "If the screensaver is active then deactivate it (un-blank the screen)"
msgstr ""
-"Ak je šetrič obrazovky aktívny, tak ho deaktivovať (opustiť režim prázdnej "
+"Deaktivuje šetrič obrazovky, ak je aktívny (opustí sa režim prázdnej "
"obrazovky)"
-#: ../src/gnome-screensaver-command.c:76
-msgid "Poke the running screensaver to simulate user activity"
-msgstr ""
-"Šťuchnúť do bežiaceho šetriča obrazovky tak, aby sa napodobnila aktivita "
-"používateľa"
-
-#: ../src/gnome-screensaver-command.c:78
-msgid ""
-"Inhibit the screensaver from activating. Command blocks while inhibit is "
-"active."
-msgstr ""
-"Potlačiť aktiváciu šetriča obrazovky. Príkaz blokuje, kým je aktívne "
-"potlačenie."
-
-#: ../src/gnome-screensaver-command.c:80
-msgid "The calling application that is inhibiting the screensaver"
-msgstr "Volajúca aplikácia, ktorá potláča šetrič obrazovky"
-
-#: ../src/gnome-screensaver-command.c:82
-msgid "The reason for inhibiting the screensaver"
-msgstr "Dôvod potlačenia šetriča obrazovky"
-
-#: ../src/gnome-screensaver-command.c:84 ../src/gnome-screensaver-dialog.c:59
+# cmd desc
+#: ../src/gnome-screensaver-command.c:58 ../src/gnome-screensaver-dialog.c:59
#: ../src/gnome-screensaver.c:56
msgid "Version of this application"
-msgstr "Verzia tejto aplikácie"
-
-#: ../src/gnome-screensaver-command.c:311
-#, c-format
-msgid "The screensaver is %s\n"
-msgstr "Šetrič obrazovky je %s\n"
+msgstr "Vypíše verziu tejto aplikácie"
-#: ../src/gnome-screensaver-command.c:311
-msgid "active"
-msgstr "aktívny"
-
-#: ../src/gnome-screensaver-command.c:311
-msgid "inactive"
-msgstr "neaktívny"
-
-#: ../src/gnome-screensaver-command.c:325
+#: ../src/gnome-screensaver-command.c:224
#, c-format
-msgid "The screensaver is not inhibited\n"
-msgstr "Šetrič obrazovky nie je potlačený\n"
+msgid "The screensaver is active\n"
+msgstr "Šetrič obrazovky je aktívny\n"
-#: ../src/gnome-screensaver-command.c:331
+#: ../src/gnome-screensaver-command.c:226
#, c-format
-msgid "The screensaver is being inhibited by:\n"
-msgstr "Šetrič obrazovky potlačuje:\n"
+msgid "The screensaver is inactive\n"
+msgstr "Šetrič obrazovky nie je aktívny\n"
-#: ../src/gnome-screensaver-command.c:362
+#: ../src/gnome-screensaver-command.c:256
#, c-format
-msgid "The screensaver has been active for %d seconds.\n"
-msgstr "Doterajšia aktivita šetriča obrazovky trvala %d sekúnd.\n"
+msgid "The screensaver has been active for %d second.\n"
+msgid_plural "The screensaver has been active for %d seconds.\n"
+msgstr[0] "Doterajšia aktivita šetriča obrazovky trvala %d sekúnd.\n"
+msgstr[1] "Doterajšia aktivita šetriča obrazovky trvala %d sekundu.\n"
+msgstr[2] "Doterajšia aktivita šetriča obrazovky trvala %d sekundy.\n"
-#: ../src/gnome-screensaver-command.c:366
+#: ../src/gnome-screensaver-command.c:258
#, c-format
msgid "The screensaver is not currently active.\n"
msgstr "Šetrič obrazovky teraz nie je aktívny.\n"
+# cmd desc
#: ../src/gnome-screensaver-dialog.c:57
msgid "Show debugging output"
-msgstr "Zobraziť ladiaci výstup"
+msgstr "Zobrazí výstup pre ladenie"
+# cmd desc
#: ../src/gnome-screensaver-dialog.c:61
msgid "Show the logout button"
-msgstr "Zobraziť tlačidlo odhlásenia"
+msgstr "Zobrazí tlačidlo odhlásenia"
+# cmd desc
#: ../src/gnome-screensaver-dialog.c:63
msgid "Command to invoke from the logout button"
-msgstr "Príkaz, ktorý sa má spustiť tlačidlom pre odhlásenie"
+msgstr "Príkaz, ktorý sa spustí tlačidlom pre odhlásenie"
+# cmd desc
#: ../src/gnome-screensaver-dialog.c:65
msgid "Show the switch user button"
-msgstr "Zobraziť tlačidlo prepnutia používateľa"
+msgstr "Zobrazí tlačidlo prepnutia používateľa"
+# cmd desc
#: ../src/gnome-screensaver-dialog.c:67
msgid "Message to show in the dialog"
-msgstr "Správa, ktorá sa má zobraziť v dialógovom okne"
+msgstr "Správa, ktorá sa zobrazí v dialógovom okne"
-#: ../src/gnome-screensaver-dialog.c:67 ../src/gnome-screensaver-dialog.c:69
+#. Translators: This is the example input for the --status-message command line option.
+#. Translators: This is the example input for the --away-message command line option.
+#: ../src/gnome-screensaver-dialog.c:69 ../src/gnome-screensaver-dialog.c:73
msgid "MESSAGE"
msgstr "SPRÁVA"
-#: ../src/gnome-screensaver-dialog.c:69
+#: ../src/gnome-screensaver-dialog.c:71
msgid "Not used"
msgstr "Nepoužité"
#. login: is whacked always translate to Username:
-#: ../src/gnome-screensaver-dialog.c:179 ../src/gnome-screensaver-dialog.c:180
-#: ../src/gnome-screensaver-dialog.c:181 ../src/gs-auth-pam.c:698
+#: ../src/gnome-screensaver-dialog.c:183 ../src/gnome-screensaver-dialog.c:184
+#: ../src/gnome-screensaver-dialog.c:185 ../src/gs-auth-pam.c:698
msgid "Username:"
msgstr "Používateľské meno:"
-#: ../src/gnome-screensaver-dialog.c:182 ../src/gnome-screensaver-dialog.c:183
+#: ../src/gnome-screensaver-dialog.c:186 ../src/gnome-screensaver-dialog.c:187
#: ../src/gs-auth-pam.c:166
msgid "Password:"
msgstr "Heslo:"
-#: ../src/gnome-screensaver-dialog.c:184
+#: ../src/gnome-screensaver-dialog.c:188
msgid "You are required to change your password immediately (password aged)"
msgstr "Musíte si ihneď zmeniť heslo (je príliš staré)"
-#: ../src/gnome-screensaver-dialog.c:185
+#: ../src/gnome-screensaver-dialog.c:189
msgid "You are required to change your password immediately (root enforced)"
msgstr "Musíte si ihneď zmeniť heslo (zmenu vyžiadal správca)"
-#: ../src/gnome-screensaver-dialog.c:186
+#: ../src/gnome-screensaver-dialog.c:190
msgid "Your account has expired; please contact your system administrator"
msgstr "Platnosť vášho účtu vypršala; prosím, kontaktujte správcu systému"
-#: ../src/gnome-screensaver-dialog.c:187
+#: ../src/gnome-screensaver-dialog.c:191
msgid "No password supplied"
msgstr "Nebolo zadané heslo"
-#: ../src/gnome-screensaver-dialog.c:188
+#: ../src/gnome-screensaver-dialog.c:192
msgid "Password unchanged"
msgstr "Heslo nezmenené"
-#: ../src/gnome-screensaver-dialog.c:189
-msgid "Can not get username"
-msgstr "Nie je možné zistiť používateľské meno"
+#: ../src/gnome-screensaver-dialog.c:193
+msgid "Cannot get username"
+msgstr "Nedá sa získať používateľské meno"
-#: ../src/gnome-screensaver-dialog.c:190
-msgid "Retype new UNIX password:"
-msgstr "Znovu zadajte UNIXové heslo:"
+#: ../src/gnome-screensaver-dialog.c:194
+msgid "Retype new Unix password:"
+msgstr "Znovu zadajte unixové heslo:"
-#: ../src/gnome-screensaver-dialog.c:191
-msgid "Enter new UNIX password:"
-msgstr "Zadajte nové UNIXové heslo:"
+#: ../src/gnome-screensaver-dialog.c:195
+msgid "Enter new Unix password:"
+msgstr "Zadajte nové unixové heslo:"
-#: ../src/gnome-screensaver-dialog.c:192
-msgid "(current) UNIX password:"
-msgstr "(aktuálne) UNIXové heslo:"
+#: ../src/gnome-screensaver-dialog.c:196
+msgid "(current) Unix password:"
+msgstr "(aktuálne) unixové heslo:"
-#: ../src/gnome-screensaver-dialog.c:193
+#: ../src/gnome-screensaver-dialog.c:197
msgid "Error while changing NIS password."
msgstr "Chyba pri zmene hesla NIS."
-#: ../src/gnome-screensaver-dialog.c:194
+#: ../src/gnome-screensaver-dialog.c:198
msgid "You must choose a longer password"
-msgstr "Musíte vybrať dlhšie heslo"
+msgstr "Musíte zvoliť dlhšie heslo"
-#: ../src/gnome-screensaver-dialog.c:195
+#: ../src/gnome-screensaver-dialog.c:199
msgid "Password has been already used. Choose another."
-msgstr "Toto heslo ste už použili. Vyberte iné."
+msgstr "Toto heslo ste už použili. Zvoľte iné."
-#: ../src/gnome-screensaver-dialog.c:196
+#: ../src/gnome-screensaver-dialog.c:200
msgid "You must wait longer to change your password"
msgstr "Pred zmenou hesla musíte počkať dlhšie"
-#: ../src/gnome-screensaver-dialog.c:197
+#: ../src/gnome-screensaver-dialog.c:201
msgid "Sorry, passwords do not match"
-msgstr "Ľutujem, heslá sa nezhodujú"
+msgstr "Prepáčte, heslá sa nezhodujú"
-#: ../src/gnome-screensaver-dialog.c:263
-msgid "Checking..."
-msgstr "Kontrola..."
+# heslo
+#: ../src/gnome-screensaver-dialog.c:267
+msgid "Checking…"
+msgstr "Kontroluje sa…"
-#: ../src/gnome-screensaver-dialog.c:305 ../src/gs-auth-pam.c:457
+#: ../src/gnome-screensaver-dialog.c:309 ../src/gs-auth-pam.c:457
msgid "Authentication failed."
msgstr "Overenie totožnosti zlyhalo."
-#: ../src/gnome-screensaver-preferences.c:524
-msgid "Blank screen"
-msgstr "Prázdna obrazovka"
-
-#: ../src/gnome-screensaver-preferences.c:530
-msgid "Random"
-msgstr "Náhodné"
-
-#: ../src/gnome-screensaver-preferences.c:980
-#, c-format
-msgid "%d hour"
-msgid_plural "%d hours"
-msgstr[0] "%d hodín"
-msgstr[1] "%d hodina"
-msgstr[2] "%d hodiny"
-
-#: ../src/gnome-screensaver-preferences.c:983
-#, c-format
-msgid "%d minute"
-msgid_plural "%d minutes"
-msgstr[0] "%d minút"
-msgstr[1] "%d minúta"
-msgstr[2] "%d minúty"
-
-#: ../src/gnome-screensaver-preferences.c:986
-#, c-format
-msgid "%d second"
-msgid_plural "%d seconds"
-msgstr[0] "%d sekúnd"
-msgstr[1] "%d sekunda"
-msgstr[2] "%d sekundy"
-
-#. hour:minutes:seconds
-#: ../src/gnome-screensaver-preferences.c:992
-#, c-format
-msgid "%s %s %s"
-msgstr "%s %s %s"
-
-#. hour:minutes
-#. minutes:seconds
-#: ../src/gnome-screensaver-preferences.c:995
-#: ../src/gnome-screensaver-preferences.c:1003
-#, c-format
-msgid "%s %s"
-msgstr "%s %s"
-
-#. hour
-#. minutes
-#. seconds
-#: ../src/gnome-screensaver-preferences.c:998
-#: ../src/gnome-screensaver-preferences.c:1006
-#: ../src/gnome-screensaver-preferences.c:1010
-#, c-format
-msgid "%s"
-msgstr "%s"
-
-#: ../src/gnome-screensaver-preferences.c:1025
-#, c-format
-msgid "Never"
-msgstr "Nikdy"
-
-#: ../src/gnome-screensaver-preferences.c:1467
-msgid "Could not load the main interface"
-msgstr "Nepodarilo sa načítať hlavné rozhranie"
-
-#: ../src/gnome-screensaver-preferences.c:1469
-msgid "Please make sure that the screensaver is properly installed"
-msgstr "Prosím, uistite sa, či je šetrič obrazovky správne nainštalovaný"
-
+# cmd desc
#: ../src/gnome-screensaver.c:57
msgid "Don't become a daemon"
-msgstr "Nestať sa démonom"
+msgstr "Zakáže spustenie formou démona"
+# cmd desc
#: ../src/gnome-screensaver.c:58
msgid "Enable debugging code"
-msgstr "Povoliť ladiaci kód"
+msgstr "Povolí ladiaci kód"
+# desktop entry name
#: ../src/gnome-screensaver.desktop.in.in.h:1
-msgid "Launch screen saver and locker program"
-msgstr "Spustiť šetrič obrazovky a uzamykací program"
+msgid "Screensaver"
+msgstr "Šetrič obrazovky"
+
+# desktop entry comment
+#: ../src/gnome-screensaver.desktop.in.in.h:2
+msgid "Launch screensaver and locker program"
+msgstr "Spúšťa šetrič obrazovky a uzamykací program"
#: ../src/gs-auth-pam.c:397
#, c-format
msgid "Unable to establish service %s: %s\n"
-msgstr "Nepodarilo sa ustanoviť službu %s: %s\n"
+msgstr "Nepodarilo sa zaviesť službu %s: %s\n"
#: ../src/gs-auth-pam.c:423
#, c-format
@@ -732,45 +235,42 @@ msgstr "V tomto čase nemáte povolený prístup."
msgid "No longer permitted to access the system."
msgstr "Už viac nemáte prístup do systému."
-#: ../src/gs-listener-dbus.c:1912
+#: ../src/gs-listener-dbus.c:1285
msgid "failed to register with the message bus"
msgstr "nepodarilo sa zaregistrovať u zbernice správ"
-#: ../src/gs-listener-dbus.c:1922
+#: ../src/gs-listener-dbus.c:1295
msgid "not connected to the message bus"
msgstr "bez pripojenia ku zbernici správ"
-#: ../src/gs-listener-dbus.c:1931
+#: ../src/gs-listener-dbus.c:1304 ../src/gs-listener-dbus.c:1334
msgid "screensaver already running in this session"
msgstr "šetrič obrazovky už v tejto relácii beží"
-#: ../src/gs-lock-plug.c:270
+#: ../src/gs-lock-plug.c:255
msgid "Time has expired."
msgstr "Čas vypršal."
-#: ../src/gs-lock-plug.c:298
+#: ../src/gs-lock-plug.c:286
msgid "You have the Caps Lock key on."
msgstr "Máte zapnutý Caps Lock."
-#: ../src/gs-lock-plug.c:1352
-msgid "S_witch User..."
-msgstr "_Prepnúť používateľa..."
+# button
+#: ../src/gs-lock-plug.c:1350
+msgid "S_witch User…"
+msgstr "_Prepnúť používateľa…"
-#: ../src/gs-lock-plug.c:1361
+# button
+#: ../src/gs-lock-plug.c:1359
msgid "Log _Out"
msgstr "_Odhlásiť"
-#. To translators: This expands to USERNAME on HOSTNAME
-#: ../src/gs-lock-plug.c:1537
-msgid "%U on %h"
-msgstr "%U na %h"
+# button
+#: ../src/gs-lock-plug.c:1366
+msgid "_Unlock"
+msgstr "_Odomknúť"
-#: ../src/gs-lock-plug.c:1551
+# label
+#: ../src/gs-lock-plug.c:1405
msgid "_Password:"
msgstr "_Heslo:"
-
-#~ msgid "Reason for being away"
-#~ msgstr "Dôvod neprítomnosti"
-
-#~ msgid "The reason for being away from the computer."
-#~ msgstr "Dôvod vzdialenia sa od počítača."
diff --git a/src/Makefile.am b/src/Makefile.am
index 1dd5d46..5a4937c 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -47,14 +47,14 @@ noinst_PROGRAMS = \
test-window \
$(NULL)
-desktopdir = $(sysconfdir)/xdg/autostart
+desktopdir = $(datadir)/applications
desktop_in_files = gnome-screensaver.desktop.in
desktop_DATA = $(desktop_in_files:.desktop.in=.desktop)
@INTLTOOL_DESKTOP_RULE@
gnome_screensaver_command_SOURCES = \
- bus.h \
gnome-screensaver-command.c \
+ gs-bus.h \
$(NULL)
gnome_screensaver_command_LDADD = \
@@ -94,8 +94,8 @@ test_passwd_LDADD = \
$(NULL)
test_watcher_SOURCES = \
- bus.h \
test-watcher.c \
+ gs-bus.h \
gs-watcher.h \
gs-watcher-x11.c \
gs-marshal.c \
@@ -163,9 +163,9 @@ gs-marshal.h: gs-marshal.list
@GLIB_GENMARSHAL@ $< --prefix=gs_marshal --header > $@
gnome_screensaver_SOURCES = \
- bus.h \
gnome-screensaver.c \
gnome-screensaver.h \
+ gs-bus.h \
gs-monitor.c \
gs-monitor.h \
gs-watcher-x11.c \
diff --git a/src/Makefile.in b/src/Makefile.in
index dff12a8..8fa9de3 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# Makefile.in generated by automake 1.16.4 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -16,23 +16,61 @@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
- test $$am__dry = yes; \
- }
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
@@ -57,14 +95,12 @@ libexec_PROGRAMS = gnome-screensaver-dialog$(EXEEXT) $(am__EXEEXT_1)
noinst_PROGRAMS = test-fade$(EXEEXT) test-passwd$(EXEEXT) \
test-watcher$(EXEEXT) test-window$(EXEEXT) $(am__EXEEXT_1)
subdir = src
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/gnome-screensaver.desktop.in.in \
- $(top_srcdir)/depcomp $(top_srcdir)/mkinstalldirs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = gnome-screensaver.desktop.in
CONFIG_CLEAN_VPATH_FILES =
@@ -145,7 +181,19 @@ am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/gnome-screensaver-command.Po \
+ ./$(DEPDIR)/gnome-screensaver-dialog.Po \
+ ./$(DEPDIR)/gnome-screensaver.Po \
+ ./$(DEPDIR)/gs-auth-@AUTH_SCHEME@.Po ./$(DEPDIR)/gs-debug.Po \
+ ./$(DEPDIR)/gs-fade.Po ./$(DEPDIR)/gs-grab-x11.Po \
+ ./$(DEPDIR)/gs-listener-dbus.Po ./$(DEPDIR)/gs-lock-plug.Po \
+ ./$(DEPDIR)/gs-manager.Po ./$(DEPDIR)/gs-marshal.Po \
+ ./$(DEPDIR)/gs-monitor.Po ./$(DEPDIR)/gs-prefs.Po \
+ ./$(DEPDIR)/gs-watcher-x11.Po ./$(DEPDIR)/gs-window-x11.Po \
+ ./$(DEPDIR)/setuid.Po ./$(DEPDIR)/subprocs.Po \
+ ./$(DEPDIR)/test-fade.Po ./$(DEPDIR)/test-passwd.Po \
+ ./$(DEPDIR)/test-watcher.Po ./$(DEPDIR)/test-window.Po
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@@ -208,8 +256,26 @@ am__uninstall_files_from_dir = { \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
DATA = $(desktop_DATA)
-ETAGS = etags
-CTAGS = ctags
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(srcdir)/gnome-screensaver.desktop.in.in \
+ $(top_srcdir)/depcomp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ALL_LINGUAS = @ALL_LINGUAS@
@@ -229,6 +295,8 @@ CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DBUS_CFLAGS = @DBUS_CFLAGS@
@@ -243,6 +311,7 @@ ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
+ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
EXPANDED_BINDIR = @EXPANDED_BINDIR@
EXPANDED_DATADIR = @EXPANDED_DATADIR@
@@ -283,6 +352,7 @@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBGNOMEKBDUI_CFLAGS = @LIBGNOMEKBDUI_CFLAGS@
@@ -293,6 +363,7 @@ LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -390,6 +461,7 @@ pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
@@ -427,12 +499,12 @@ INCLUDES = \
$(SYSTEMD_CFLAGS) \
$(NULL)
-desktopdir = $(sysconfdir)/xdg/autostart
+desktopdir = $(datadir)/applications
desktop_in_files = gnome-screensaver.desktop.in
desktop_DATA = $(desktop_in_files:.desktop.in=.desktop)
gnome_screensaver_command_SOURCES = \
- bus.h \
gnome-screensaver-command.c \
+ gs-bus.h \
$(NULL)
gnome_screensaver_command_LDADD = \
@@ -472,8 +544,8 @@ test_passwd_LDADD = \
$(NULL)
test_watcher_SOURCES = \
- bus.h \
test-watcher.c \
+ gs-bus.h \
gs-watcher.h \
gs-watcher-x11.c \
gs-marshal.c \
@@ -534,9 +606,9 @@ BUILT_SOURCES = \
$(NULL)
gnome_screensaver_SOURCES = \
- bus.h \
gnome-screensaver.c \
gnome-screensaver.h \
+ gs-bus.h \
gs-monitor.c \
gs-monitor.h \
gs-watcher-x11.c \
@@ -599,14 +671,13 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu src/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -628,10 +699,12 @@ install-binPROGRAMS: $(bin_PROGRAMS)
fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p || test -f $$p1; \
- then echo "$$p"; echo "$$p"; else :; fi; \
+ while read p p1; do if test -f $$p \
+ || test -f $$p1 \
+ ; then echo "$$p"; echo "$$p"; else :; fi; \
done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ sed -e 'p;s,.*/,,;n;h' \
+ -e 's|.*|.|' \
-e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
@@ -652,7 +725,8 @@ uninstall-binPROGRAMS:
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
+ -e 's/$$/$(EXEEXT)/' \
+ `; \
test -n "$$list" || exit 0; \
echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(bindir)" && rm -f $$files
@@ -674,10 +748,12 @@ install-libexecPROGRAMS: $(libexec_PROGRAMS)
fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p || test -f $$p1; \
- then echo "$$p"; echo "$$p"; else :; fi; \
+ while read p p1; do if test -f $$p \
+ || test -f $$p1 \
+ ; then echo "$$p"; echo "$$p"; else :; fi; \
done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ sed -e 'p;s,.*/,,;n;h' \
+ -e 's|.*|.|' \
-e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
@@ -698,7 +774,8 @@ uninstall-libexecPROGRAMS:
@list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
+ -e 's/$$/$(EXEEXT)/' \
+ `; \
test -n "$$list" || exit 0; \
echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(libexecdir)" && rm -f $$files
@@ -720,24 +797,31 @@ clean-noinstPROGRAMS:
list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
echo " rm -f" $$list; \
rm -f $$list
+
gnome-screensaver$(EXEEXT): $(gnome_screensaver_OBJECTS) $(gnome_screensaver_DEPENDENCIES) $(EXTRA_gnome_screensaver_DEPENDENCIES)
@rm -f gnome-screensaver$(EXEEXT)
$(AM_V_CCLD)$(gnome_screensaver_LINK) $(gnome_screensaver_OBJECTS) $(gnome_screensaver_LDADD) $(LIBS)
+
gnome-screensaver-command$(EXEEXT): $(gnome_screensaver_command_OBJECTS) $(gnome_screensaver_command_DEPENDENCIES) $(EXTRA_gnome_screensaver_command_DEPENDENCIES)
@rm -f gnome-screensaver-command$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gnome_screensaver_command_OBJECTS) $(gnome_screensaver_command_LDADD) $(LIBS)
+
gnome-screensaver-dialog$(EXEEXT): $(gnome_screensaver_dialog_OBJECTS) $(gnome_screensaver_dialog_DEPENDENCIES) $(EXTRA_gnome_screensaver_dialog_DEPENDENCIES)
@rm -f gnome-screensaver-dialog$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gnome_screensaver_dialog_OBJECTS) $(gnome_screensaver_dialog_LDADD) $(LIBS)
+
test-fade$(EXEEXT): $(test_fade_OBJECTS) $(test_fade_DEPENDENCIES) $(EXTRA_test_fade_DEPENDENCIES)
@rm -f test-fade$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(test_fade_OBJECTS) $(test_fade_LDADD) $(LIBS)
+
test-passwd$(EXEEXT): $(test_passwd_OBJECTS) $(test_passwd_DEPENDENCIES) $(EXTRA_test_passwd_DEPENDENCIES)
@rm -f test-passwd$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(test_passwd_OBJECTS) $(test_passwd_LDADD) $(LIBS)
+
test-watcher$(EXEEXT): $(test_watcher_OBJECTS) $(test_watcher_DEPENDENCIES) $(EXTRA_test_watcher_DEPENDENCIES)
@rm -f test-watcher$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(test_watcher_OBJECTS) $(test_watcher_LDADD) $(LIBS)
+
test-window$(EXEEXT): $(test_window_OBJECTS) $(test_window_DEPENDENCIES) $(EXTRA_test_window_DEPENDENCIES)
@rm -f test-window$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(test_window_OBJECTS) $(test_window_LDADD) $(LIBS)
@@ -748,41 +832,47 @@ mostlyclean-compile:
distclean-compile:
-rm -f *.tab.c
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gnome-screensaver-command.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gnome-screensaver-dialog.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gnome-screensaver.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-auth-@AUTH_SCHEME@.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-debug.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-fade.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-grab-x11.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-listener-dbus.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-lock-plug.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-manager.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-marshal.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-monitor.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-prefs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-watcher-x11.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-window-x11.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/setuid.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/subprocs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-fade.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-passwd.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-watcher.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-window.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gnome-screensaver-command.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gnome-screensaver-dialog.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gnome-screensaver.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-auth-@AUTH_SCHEME@.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-debug.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-fade.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-grab-x11.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-listener-dbus.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-lock-plug.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-manager.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-marshal.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-monitor.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-prefs.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-watcher-x11.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gs-window-x11.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/setuid.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/subprocs.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-fade.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-passwd.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-watcher.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-window.Po@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+ @$(MKDIR_P) $(@D)
+ @echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $<
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -818,26 +908,15 @@ uninstall-desktopDATA:
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(desktopdir)'; $(am__uninstall_files_from_dir)
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
@@ -849,15 +928,11 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$$unique; \
fi; \
fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
@@ -866,9 +941,10 @@ GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
-cscopelist: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
@@ -883,8 +959,10 @@ cscopelist: $(HEADERS) $(SOURCES) $(LISP)
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+distdir: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) distdir-am
-distdir: $(DISTFILES)
+distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -924,7 +1002,8 @@ installdirs:
done
install: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) install-am
-install-exec: install-exec-am
+install-exec: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) install-exec-am
install-data: install-data-am
uninstall: uninstall-am
@@ -962,7 +1041,27 @@ clean-am: clean-binPROGRAMS clean-generic clean-libexecPROGRAMS \
clean-libtool clean-noinstPROGRAMS mostlyclean-am
distclean: distclean-am
- -rm -rf ./$(DEPDIR)
+ -rm -f ./$(DEPDIR)/gnome-screensaver-command.Po
+ -rm -f ./$(DEPDIR)/gnome-screensaver-dialog.Po
+ -rm -f ./$(DEPDIR)/gnome-screensaver.Po
+ -rm -f ./$(DEPDIR)/gs-auth-@AUTH_SCHEME@.Po
+ -rm -f ./$(DEPDIR)/gs-debug.Po
+ -rm -f ./$(DEPDIR)/gs-fade.Po
+ -rm -f ./$(DEPDIR)/gs-grab-x11.Po
+ -rm -f ./$(DEPDIR)/gs-listener-dbus.Po
+ -rm -f ./$(DEPDIR)/gs-lock-plug.Po
+ -rm -f ./$(DEPDIR)/gs-manager.Po
+ -rm -f ./$(DEPDIR)/gs-marshal.Po
+ -rm -f ./$(DEPDIR)/gs-monitor.Po
+ -rm -f ./$(DEPDIR)/gs-prefs.Po
+ -rm -f ./$(DEPDIR)/gs-watcher-x11.Po
+ -rm -f ./$(DEPDIR)/gs-window-x11.Po
+ -rm -f ./$(DEPDIR)/setuid.Po
+ -rm -f ./$(DEPDIR)/subprocs.Po
+ -rm -f ./$(DEPDIR)/test-fade.Po
+ -rm -f ./$(DEPDIR)/test-passwd.Po
+ -rm -f ./$(DEPDIR)/test-watcher.Po
+ -rm -f ./$(DEPDIR)/test-window.Po
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
@@ -1009,7 +1108,27 @@ install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
+ -rm -f ./$(DEPDIR)/gnome-screensaver-command.Po
+ -rm -f ./$(DEPDIR)/gnome-screensaver-dialog.Po
+ -rm -f ./$(DEPDIR)/gnome-screensaver.Po
+ -rm -f ./$(DEPDIR)/gs-auth-@AUTH_SCHEME@.Po
+ -rm -f ./$(DEPDIR)/gs-debug.Po
+ -rm -f ./$(DEPDIR)/gs-fade.Po
+ -rm -f ./$(DEPDIR)/gs-grab-x11.Po
+ -rm -f ./$(DEPDIR)/gs-listener-dbus.Po
+ -rm -f ./$(DEPDIR)/gs-lock-plug.Po
+ -rm -f ./$(DEPDIR)/gs-manager.Po
+ -rm -f ./$(DEPDIR)/gs-marshal.Po
+ -rm -f ./$(DEPDIR)/gs-monitor.Po
+ -rm -f ./$(DEPDIR)/gs-prefs.Po
+ -rm -f ./$(DEPDIR)/gs-watcher-x11.Po
+ -rm -f ./$(DEPDIR)/gs-window-x11.Po
+ -rm -f ./$(DEPDIR)/setuid.Po
+ -rm -f ./$(DEPDIR)/subprocs.Po
+ -rm -f ./$(DEPDIR)/test-fade.Po
+ -rm -f ./$(DEPDIR)/test-passwd.Po
+ -rm -f ./$(DEPDIR)/test-watcher.Po
+ -rm -f ./$(DEPDIR)/test-window.Po
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
@@ -1029,25 +1148,28 @@ ps-am:
uninstall-am: uninstall-binPROGRAMS uninstall-desktopDATA \
uninstall-libexecPROGRAMS
-.MAKE: all check install install-am install-exec-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic clean-libexecPROGRAMS clean-libtool \
- clean-noinstPROGRAMS cscopelist ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-binPROGRAMS install-data \
- install-data-am install-desktopDATA install-dvi install-dvi-am \
- install-exec install-exec-am install-exec-hook install-html \
- install-html-am install-info install-info-am \
+.MAKE: all check install install-am install-exec install-exec-am \
+ install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
+ clean-binPROGRAMS clean-generic clean-libexecPROGRAMS \
+ clean-libtool clean-noinstPROGRAMS cscopelist-am ctags \
+ ctags-am distclean distclean-compile distclean-generic \
+ distclean-libtool distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-binPROGRAMS \
+ install-data install-data-am install-desktopDATA install-dvi \
+ install-dvi-am install-exec install-exec-am install-exec-hook \
+ install-html install-html-am install-info install-info-am \
install-libexecPROGRAMS install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-binPROGRAMS \
+ tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \
uninstall-desktopDATA uninstall-libexecPROGRAMS
+.PRECIOUS: Makefile
+
@INTLTOOL_DESKTOP_RULE@
gs-marshal.c: gs-marshal.list
diff --git a/src/gnome-screensaver-command.c b/src/gnome-screensaver-command.c
index f8db912..4379a38 100644
--- a/src/gnome-screensaver-command.c
+++ b/src/gnome-screensaver-command.c
@@ -30,7 +30,7 @@
#include <gio/gio.h>
#include <glib/gi18n.h>
-#include "bus.h"
+#include "gs-bus.h"
static gboolean do_quit = FALSE;
static gboolean do_lock = FALSE;
diff --git a/src/gnome-screensaver-dialog.c b/src/gnome-screensaver-dialog.c
index 134d7a3..1ea7db7 100644
--- a/src/gnome-screensaver-dialog.c
+++ b/src/gnome-screensaver-dialog.c
@@ -363,7 +363,7 @@ auth_check_idle (GSLockPlug *plug)
if (loop_counter < MAX_FAILURES) {
gs_debug ("Authentication failed, retrying (%u)", loop_counter);
- g_timeout_add (3000, (GSourceFunc)reset_idle_cb, plug);
+ g_timeout_add_seconds (3, (GSourceFunc)reset_idle_cb, plug);
} else {
gs_debug ("Authentication failed, quitting (max failures)");
again = FALSE;
@@ -371,7 +371,7 @@ auth_check_idle (GSLockPlug *plug)
* terminates us after it has finished the dialog shake. Time out
* after 5 seconds and quit anyway if this doesn't happen though */
g_idle_add ((GSourceFunc)response_request_quit, NULL);
- g_timeout_add (5000, (GSourceFunc)quit_timeout_cb, NULL);
+ g_timeout_add_seconds (5, (GSourceFunc)quit_timeout_cb, NULL);
}
}
diff --git a/src/gnome-screensaver.desktop.in b/src/gnome-screensaver.desktop.in
index ca2c569..2d07749 100644
--- a/src/gnome-screensaver.desktop.in
+++ b/src/gnome-screensaver.desktop.in
@@ -5,7 +5,6 @@ _Comment=Launch screensaver and locker program
Icon=preferences-desktop-screensaver
Exec=gnome-screensaver
OnlyShowIn=GNOME;
-AutostartCondition=GNOME3 if-session gnome-fallback
NoDisplay=true
X-GNOME-Autostart-Phase=Application
X-GNOME-Autostart-Notify=true
diff --git a/src/gnome-screensaver.desktop.in.in b/src/gnome-screensaver.desktop.in.in
index fae80c4..82d6d6f 100644
--- a/src/gnome-screensaver.desktop.in.in
+++ b/src/gnome-screensaver.desktop.in.in
@@ -5,7 +5,6 @@ _Comment=Launch screensaver and locker program
Icon=preferences-desktop-screensaver
Exec=gnome-screensaver
OnlyShowIn=GNOME;
-AutostartCondition=GNOME3 if-session gnome-fallback
NoDisplay=true
X-GNOME-Autostart-Phase=Application
X-GNOME-Autostart-Notify=true
diff --git a/src/bus.h b/src/gs-bus.h
similarity index 98%
rename from src/bus.h
rename to src/gs-bus.h
index 412d1ef..fea13d3 100644
--- a/src/bus.h
+++ b/src/gs-bus.h
@@ -19,8 +19,8 @@
*
*/
-#ifndef bus_h
-#define bus_h
+#ifndef __GS_BUS_H
+#define __GS_BUS_H
/* systemd logind */
#define SYSTEMD_LOGIND_SERVICE "org.freedesktop.login1"
diff --git a/src/gs-listener-dbus.c b/src/gs-listener-dbus.c
index 56afdc0..7f718fa 100644
--- a/src/gs-listener-dbus.c
+++ b/src/gs-listener-dbus.c
@@ -25,6 +25,7 @@
#include <stdio.h>
#include <time.h>
#include <string.h>
+#include <unistd.h>
#include <glib/gi18n.h>
@@ -33,15 +34,13 @@
#include <dbus/dbus-glib-lowlevel.h>
#ifdef WITH_SYSTEMD
-#include <systemd/sd-daemon.h>
#include <systemd/sd-login.h>
#endif
#include "gs-listener-dbus.h"
#include "gs-marshal.h"
#include "gs-debug.h"
-
-#include "bus.h"
+#include "gs-bus.h"
/* this is for dbus < 0.3 */
#if ((DBUS_VERSION_MAJOR == 0) && (DBUS_VERSION_MINOR < 30))
@@ -726,7 +725,7 @@ listener_dbus_handle_session_message (DBusConnection *connection,
}
if (dbus_message_is_method_call (message, GS_SERVICE, "SimulateUserActivity")) {
g_signal_emit (listener, signals [SIMULATE_USER_ACTIVITY], 0);
- return DBUS_HANDLER_RESULT_HANDLED;
+ return send_success_reply (connection, message);
}
if (dbus_message_is_method_call (message, "org.freedesktop.DBus.Introspectable", "Introspect")) {
return do_introspect (connection, message, local_interface);
@@ -1479,7 +1478,8 @@ gs_listener_init (GSListener *listener)
listener->priv = GS_LISTENER_GET_PRIVATE (listener);
#ifdef WITH_SYSTEMD
- listener->priv->have_systemd = sd_booted () > 0;
+ /* check if logind is running */
+ listener->priv->have_systemd = (access("/run/systemd/seats/", F_OK) >= 0);
#endif
gs_listener_dbus_init (listener);
diff --git a/src/gs-lock-plug.c b/src/gs-lock-plug.c
index 4552646..ee4c0f3 100644
--- a/src/gs-lock-plug.c
+++ b/src/gs-lock-plug.c
@@ -260,9 +260,9 @@ dialog_timed_out (GSLockPlug *plug)
remove_response_idle (plug);
- plug->priv->response_idle_id = g_timeout_add (2000,
- (GSourceFunc)response_cancel_idle_cb,
- plug);
+ plug->priv->response_idle_id = g_timeout_add_seconds (2,
+ (GSourceFunc)response_cancel_idle_cb,
+ plug);
return FALSE;
}
@@ -483,7 +483,7 @@ gs_lock_plug_run (GSLockPlug *plug)
g_signal_handler_disconnect (plug, unmap_handler);
g_signal_handler_disconnect (plug, delete_handler);
g_signal_handler_disconnect (plug, destroy_handler);
- g_signal_handler_disconnect (plug, keymap_handler);
+ g_signal_handler_disconnect (keymap, keymap_handler);
}
g_object_unref (plug);
@@ -1452,9 +1452,9 @@ switch_user_button_clicked (GtkButton *button,
gs_lock_plug_set_sensitive (plug, FALSE);
- plug->priv->response_idle_id = g_timeout_add (2000,
- (GSourceFunc)response_cancel_idle_cb,
- plug);
+ plug->priv->response_idle_id = g_timeout_add_seconds (2,
+ (GSourceFunc)response_cancel_idle_cb,
+ plug);
gs_lock_plug_set_busy (plug);
do_user_switch (plug);
diff --git a/src/gs-marshal.c b/src/gs-marshal.c
index ef809bb..8b1d098 100644
--- a/src/gs-marshal.c
+++ b/src/gs-marshal.c
@@ -1,7 +1,6 @@
#include "gs-marshal.h"
-
-#include <glib-object.h>
-
+/* This file is generated by glib-genmarshal, do not modify it. This code is licensed under the same license as the containing project. Note that it links to GLib, so must comply with the LGPL linking clauses. */
+#include <glib-object.h>
#ifdef G_ENABLE_DEBUG
#define g_marshal_value_peek_boolean(v) g_value_get_boolean (v)
@@ -49,21 +48,20 @@
#define g_marshal_value_peek_variant(v) (v)->data[0].v_pointer
#endif /* !G_ENABLE_DEBUG */
-
/* BOOLEAN:VOID (gs-marshal.list:1) */
void
gs_marshal_BOOLEAN__VOID (GClosure *closure,
- GValue *return_value G_GNUC_UNUSED,
+ GValue *return_value,
guint n_param_values,
const GValue *param_values,
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef gboolean (*GMarshalFunc_BOOLEAN__VOID) (gpointer data1,
- gpointer data2);
- register GMarshalFunc_BOOLEAN__VOID callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef gboolean (*GMarshalFunc_BOOLEAN__VOID) (gpointer data1,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_BOOLEAN__VOID callback;
gboolean v_return;
g_return_if_fail (return_value != NULL);
@@ -90,18 +88,18 @@ gs_marshal_BOOLEAN__VOID (GClosure *closure,
/* BOOLEAN:INT (gs-marshal.list:2) */
void
gs_marshal_BOOLEAN__INT (GClosure *closure,
- GValue *return_value G_GNUC_UNUSED,
+ GValue *return_value,
guint n_param_values,
const GValue *param_values,
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef gboolean (*GMarshalFunc_BOOLEAN__INT) (gpointer data1,
- gint arg_1,
- gpointer data2);
- register GMarshalFunc_BOOLEAN__INT callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef gboolean (*GMarshalFunc_BOOLEAN__INT) (gpointer data1,
+ gint arg1,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_BOOLEAN__INT callback;
gboolean v_return;
g_return_if_fail (return_value != NULL);
@@ -129,18 +127,18 @@ gs_marshal_BOOLEAN__INT (GClosure *closure,
/* BOOLEAN:BOOLEAN (gs-marshal.list:3) */
void
gs_marshal_BOOLEAN__BOOLEAN (GClosure *closure,
- GValue *return_value G_GNUC_UNUSED,
+ GValue *return_value,
guint n_param_values,
const GValue *param_values,
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef gboolean (*GMarshalFunc_BOOLEAN__BOOLEAN) (gpointer data1,
- gboolean arg_1,
- gpointer data2);
- register GMarshalFunc_BOOLEAN__BOOLEAN callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef gboolean (*GMarshalFunc_BOOLEAN__BOOLEAN) (gpointer data1,
+ gboolean arg1,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_BOOLEAN__BOOLEAN callback;
gboolean v_return;
g_return_if_fail (return_value != NULL);
@@ -174,14 +172,14 @@ gs_marshal_VOID__STRING_STRING_STRING (GClosure *closure,
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef void (*GMarshalFunc_VOID__STRING_STRING_STRING) (gpointer data1,
- gpointer arg_1,
- gpointer arg_2,
- gpointer arg_3,
- gpointer data2);
- register GMarshalFunc_VOID__STRING_STRING_STRING callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef void (*GMarshalFunc_VOID__STRING_STRING_STRING) (gpointer data1,
+ gpointer arg1,
+ gpointer arg2,
+ gpointer arg3,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__STRING_STRING_STRING callback;
g_return_if_fail (n_param_values == 4);
diff --git a/src/gs-marshal.h b/src/gs-marshal.h
index ff96201..921f1b7 100644
--- a/src/gs-marshal.h
+++ b/src/gs-marshal.h
@@ -1,44 +1,48 @@
+/* This file is generated by glib-genmarshal, do not modify it. This code is licensed under the same license as the containing project. Note that it links to GLib, so must comply with the LGPL linking clauses. */
+#ifndef __GS_MARSHAL_MARSHAL_H__
+#define __GS_MARSHAL_MARSHAL_H__
-#ifndef __gs_marshal_MARSHAL_H__
-#define __gs_marshal_MARSHAL_H__
-
-#include <glib-object.h>
+#include <glib-object.h>
G_BEGIN_DECLS
/* BOOLEAN:VOID (gs-marshal.list:1) */
-extern void gs_marshal_BOOLEAN__VOID (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
+extern
+void gs_marshal_BOOLEAN__VOID (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
/* BOOLEAN:INT (gs-marshal.list:2) */
-extern void gs_marshal_BOOLEAN__INT (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
+extern
+void gs_marshal_BOOLEAN__INT (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
/* BOOLEAN:BOOLEAN (gs-marshal.list:3) */
-extern void gs_marshal_BOOLEAN__BOOLEAN (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
+extern
+void gs_marshal_BOOLEAN__BOOLEAN (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
/* VOID:STRING,STRING,STRING (gs-marshal.list:4) */
-extern void gs_marshal_VOID__STRING_STRING_STRING (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
+extern
+void gs_marshal_VOID__STRING_STRING_STRING (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
-G_END_DECLS
-#endif /* __gs_marshal_MARSHAL_H__ */
+G_END_DECLS
+#endif /* __GS_MARSHAL_MARSHAL_H__ */
diff --git a/src/gs-monitor.c b/src/gs-monitor.c
index 6e43a2b..f038bab 100644
--- a/src/gs-monitor.c
+++ b/src/gs-monitor.c
@@ -151,7 +151,7 @@ watcher_idle_notice_cb (GSWatcher *watcher,
if (monitor->priv->release_grab_id != 0) {
g_source_remove (monitor->priv->release_grab_id);
}
- monitor->priv->release_grab_id = g_timeout_add (1000, (GSourceFunc)release_grab_timeout, monitor);
+ monitor->priv->release_grab_id = g_timeout_add_seconds (1, (GSourceFunc)release_grab_timeout, monitor);
} else {
gs_debug ("manager active, skipping fade cancellation");
}
diff --git a/src/gs-watcher-x11.c b/src/gs-watcher-x11.c
index f0b0d83..f06e697 100644
--- a/src/gs-watcher-x11.c
+++ b/src/gs-watcher-x11.c
@@ -36,8 +36,7 @@
#include "gs-watcher.h"
#include "gs-marshal.h"
#include "gs-debug.h"
-
-#include "bus.h"
+#include "gs-bus.h"
static void gs_watcher_class_init (GSWatcherClass *klass);
static void gs_watcher_init (GSWatcher *watcher);
@@ -93,9 +92,9 @@ static void
add_watchdog_timer (GSWatcher *watcher,
glong timeout)
{
- watcher->priv->watchdog_timer_id = g_timeout_add (timeout,
- (GSourceFunc)watchdog_timer,
- watcher);
+ watcher->priv->watchdog_timer_id = g_timeout_add_seconds (timeout,
+ (GSourceFunc)watchdog_timer,
+ watcher);
}
static void
@@ -360,9 +359,9 @@ set_status (GSWatcher *watcher,
if (watcher->priv->idle_id > 0) {
g_source_remove (watcher->priv->idle_id);
}
- watcher->priv->idle_id = g_timeout_add (watcher->priv->delta_notice_timeout,
- (GSourceFunc)on_idle_timeout,
- watcher);
+ watcher->priv->idle_id = g_timeout_add_seconds (watcher->priv->delta_notice_timeout,
+ (GSourceFunc)on_idle_timeout,
+ watcher);
} else {
/* cancel notice too */
if (watcher->priv->idle_id > 0) {
@@ -490,9 +489,9 @@ gs_watcher_init (GSWatcher *watcher)
connect_presence_watcher (watcher);
/* time before idle signal to send notice signal */
- watcher->priv->delta_notice_timeout = 10000;
+ watcher->priv->delta_notice_timeout = 10;
- add_watchdog_timer (watcher, 600000);
+ add_watchdog_timer (watcher, 600);
}
static void
diff --git a/src/test-window.c b/src/test-window.c
index 6f07b3b..a82e160 100644
--- a/src/test-window.c
+++ b/src/test-window.c
@@ -158,7 +158,7 @@ main (int argc,
test_window ();
/* safety valve in case we can't authenticate */
- g_timeout_add (30000, (GSourceFunc)gtk_main_quit, NULL);
+ g_timeout_add_seconds (30, (GSourceFunc)gtk_main_quit, NULL);
gtk_main ();
Debdiff
[The following lists of changes regard files as different if they have different names, permissions or owners.]
Files in second set of .debs but not in first
-rw-r--r-- root/root /usr/lib/debug/.build-id/83/611b39b83b8b4a70621856c29351ed8eeae4bf.debug -rw-r--r-- root/root /usr/lib/debug/.build-id/c9/c3846df14982d8c9be23b622dcdfda292653b7.debug -rw-r--r-- root/root /usr/share/locale/bs/LC_MESSAGES/gnome-screensaver.mo -rw-r--r-- root/root /usr/share/locale/fur/LC_MESSAGES/gnome-screensaver.mo -rw-r--r-- root/root /usr/share/locale/gd/LC_MESSAGES/gnome-screensaver.mo
Files in first set of .debs but not in second
-rw-r--r-- root/root /usr/lib/debug/.build-id/13/574837d4418410b6973e3421303638e4f23eae.debug -rw-r--r-- root/root /usr/lib/debug/.build-id/17/f7234df4f58f2176d047b33bff635f1bf452ed.debug
No differences were encountered between the control files of package gnome-screensaver
Control files of package gnome-screensaver-dbgsym: lines which differ (wdiff format)
Build-Ids: 13574837d4418410b6973e3421303638e4f23eae 17f7234df4f58f2176d047b33bff635f1bf452ed 33353ad2546f9384c1b21b6c9d6655d9b6e88634 83611b39b83b8b4a70621856c29351ed8eeae4bf c9c3846df14982d8c9be23b622dcdfda292653b7