New Upstream Release - supercat
Ready changes
Summary
Merged new upstream version: 0.5.8 (was: 0.5.7).
Resulting package
Built on 2022-10-21T06:21 (took 4m3s)
The resulting binary packages can be installed (if you have the apt repository enabled) by running one of:
apt install -t fresh-releases supercat-dbgsymapt install -t fresh-releases supercat
Lintian Result
Diff
diff --git a/ChangeLog b/ChangeLog
index 581875d..e790fbf 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,7 +1,3 @@
-2015-10-31 Thomas Anderson <tanderson@caltech.edu>
-
- * Add support for case-insensitive regexp matches
-
2008-02-16 Thomas Anderson <gentoofan23@gmail.com>
* Add spc config files for Apache error and
diff --git a/Makefile.in b/Makefile.in
index 1ed28e3..69cd1e4 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -134,7 +134,7 @@ am__recursive_targets = \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
- cscope distdir distdir-am dist dist-all distcheck
+ cscope distdir dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)config.h.in
# Read a list of newline-separated strings from the standard input,
@@ -325,8 +325,8 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -459,10 +459,7 @@ distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
-distdir: $(BUILT_SOURCES)
- $(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
+distdir: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
@@ -527,7 +524,7 @@ distdir-am: $(DISTFILES)
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
@@ -553,7 +550,7 @@ dist-shar: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
- shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
@@ -571,7 +568,7 @@ dist dist-all:
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
- eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
@@ -581,7 +578,7 @@ distcheck: dist
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
- eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
diff --git a/aclocal.m4 b/aclocal.m4
index 8c6b78f..f3018f6 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -1,6 +1,6 @@
-# generated automatically by aclocal 1.16.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.15 -*- Autoconf -*-
-# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -20,7 +20,7 @@ You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-# Copyright (C) 2002-2018 Free Software Foundation, Inc.
+# Copyright (C) 2002-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -32,10 +32,10 @@ To do so, use the procedure documented by the package, typically 'autoreconf'.])
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.16'
+[am__api_version='1.15'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.16.1], [],
+m4_if([$1], [1.15], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -51,14 +51,14 @@ m4_define([_AM_AUTOCONF_VERSION], [])
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.16.1])dnl
+[AM_AUTOMAKE_VERSION([1.15])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -110,7 +110,7 @@ am_aux_dir=`cd "$ac_aux_dir" && pwd`
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997-2018 Free Software Foundation, Inc.
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -141,7 +141,7 @@ AC_CONFIG_COMMANDS_PRE(
Usually this means the macro was only invoked conditionally.]])
fi])])
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -332,12 +332,13 @@ _AM_SUBST_NOTMAKE([am__nodep])dnl
# Generate code to set up dependency tracking. -*- Autoconf -*-
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
+
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
@@ -345,41 +346,49 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
# Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
- # TODO: see whether this extra hack can be removed once we start
- # requiring Autoconf 2.70 or later.
- AS_CASE([$CONFIG_FILES],
- [*\'*], [eval set x "$CONFIG_FILES"],
- [*], [set x $CONFIG_FILES])
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
shift
- # Used to flag and report bootstrapping failures.
- am_rc=0
- for am_mf
+ for mf
do
# Strip MF so we end up with the name of the file.
- am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile which includes
- # dependency-tracking related rules and includes.
- # Grep'ing the whole file directly is not great: AIX grep has a line
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
- sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
- || continue
- am_dirpart=`AS_DIRNAME(["$am_mf"])`
- am_filepart=`AS_BASENAME(["$am_mf"])`
- AM_RUN_LOG([cd "$am_dirpart" \
- && sed -e '/# am--include-marker/d' "$am_filepart" \
- | $MAKE -f - am--depfiles]) || am_rc=$?
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "$am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
done
- if test $am_rc -ne 0; then
- AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments
- for automatic dependency tracking. Try re-running configure with the
- '--disable-dependency-tracking' option to at least be able to build
- the package (albeit without support for automatic dependency tracking).])
- fi
- AS_UNSET([am_dirpart])
- AS_UNSET([am_filepart])
- AS_UNSET([am_mf])
- AS_UNSET([am_rc])
- rm -f conftest-deps.mk
}
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
@@ -388,17 +397,18 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
-# This code is only required when automatic dependency tracking is enabled.
-# This creates each '.Po' and '.Plo' makefile fragment that we'll need in
-# order to bootstrap the dependency handling code.
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each '.P' file that we will
+# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])])
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -485,8 +495,8 @@ AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
AC_REQUIRE([AC_PROG_MKDIR_P])dnl
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
-# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
# We need awk for the "check" target (and possibly the TAP driver). The
# system "awk" is bad on some platforms.
@@ -553,7 +563,7 @@ END
Aborting the configuration process, to ensure you take notice of the issue.
You can download and install GNU coreutils to get an 'rm' implementation
-that behaves properly: <https://www.gnu.org/software/coreutils/>.
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
@@ -595,7 +605,7 @@ for _am_header in $config_headers :; do
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -616,7 +626,7 @@ if test x"${install_sh+set}" != xset; then
fi
AC_SUBST([install_sh])])
-# Copyright (C) 2003-2018 Free Software Foundation, Inc.
+# Copyright (C) 2003-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -637,7 +647,7 @@ AC_SUBST([am__leading_dot])])
# Check to see how 'make' treats includes. -*- Autoconf -*-
-# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -645,42 +655,49 @@ AC_SUBST([am__leading_dot])])
# AM_MAKE_INCLUDE()
# -----------------
-# Check whether make has an 'include' directive that can support all
-# the idioms we need for our automatic dependency tracking code.
+# Check to see how make treats includes.
AC_DEFUN([AM_MAKE_INCLUDE],
-[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive])
-cat > confinc.mk << 'END'
+[am_make=${MAKE-make}
+cat > confinc << 'END'
am__doit:
- @echo this is the am__doit target >confinc.out
+ @echo this is the am__doit target
.PHONY: am__doit
END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
am__include="#"
am__quote=
-# BSD make does it like this.
-echo '.include "confinc.mk" # ignored' > confmf.BSD
-# Other make implementations (GNU, Solaris 10, AIX) do it like this.
-echo 'include confinc.mk # ignored' > confmf.GNU
-_am_result=no
-for s in GNU BSD; do
- AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out])
- AS_CASE([$?:`cat confinc.out 2>/dev/null`],
- ['0:this is the am__doit target'],
- [AS_CASE([$s],
- [BSD], [am__include='.include' am__quote='"'],
- [am__include='include' am__quote=''])])
- if test "$am__include" != "#"; then
- _am_result="yes ($s style)"
- break
- fi
-done
-rm -f confinc.* confmf.*
-AC_MSG_RESULT([${_am_result}])
-AC_SUBST([am__include])])
-AC_SUBST([am__quote])])
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997-2018 Free Software Foundation, Inc.
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -719,7 +736,7 @@ fi
# Helper functions for option handling. -*- Autoconf -*-
-# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -748,7 +765,7 @@ AC_DEFUN([_AM_SET_OPTIONS],
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -795,7 +812,7 @@ AC_LANG_POP([C])])
# For backward compatibility.
AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
-# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -814,7 +831,7 @@ AC_DEFUN([AM_RUN_LOG],
# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -895,7 +912,7 @@ AC_CONFIG_COMMANDS_PRE(
rm -f conftest.file
])
-# Copyright (C) 2009-2018 Free Software Foundation, Inc.
+# Copyright (C) 2009-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -955,7 +972,7 @@ AC_SUBST([AM_BACKSLASH])dnl
_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
])
-# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -983,7 +1000,7 @@ fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
-# Copyright (C) 2006-2018 Free Software Foundation, Inc.
+# Copyright (C) 2006-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -1002,7 +1019,7 @@ AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
# Check how to create a tarball. -*- Autoconf -*-
-# Copyright (C) 2004-2018 Free Software Foundation, Inc.
+# Copyright (C) 2004-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
diff --git a/compile b/compile
index 99e5052..718dc6d 100755
--- a/compile
+++ b/compile
@@ -1,9 +1,9 @@
#! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
-scriptversion=2018-03-07.03; # UTC
+scriptversion=2012-10-14.11; # UTC
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Copyright (C) 1999-2012 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
@@ -17,7 +17,7 @@ scriptversion=2018-03-07.03; # UTC
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <https://www.gnu.org/licenses/>.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -255,8 +255,7 @@ EOF
echo "compile $scriptversion"
exit $?
;;
- cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
- icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
+ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
func_cl_wrapper "$@" # Doesn't return...
;;
esac
@@ -340,9 +339,9 @@ exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
-# eval: (add-hook 'before-save-hook 'time-stamp)
+# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
+# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
diff --git a/config.guess b/config.guess
index bbd48b6..1f5c50c 100755
--- a/config.guess
+++ b/config.guess
@@ -1,8 +1,8 @@
#! /bin/sh
# Attempt to guess a canonical system name.
-# Copyright 1992-2017 Free Software Foundation, Inc.
+# Copyright 1992-2014 Free Software Foundation, Inc.
-timestamp='2017-01-01'
+timestamp='2014-03-23'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -24,12 +24,12 @@ timestamp='2017-01-01'
# program. This Exception is an additional permission under section 7
# of the GNU General Public License, version 3 ("GPLv3").
#
-# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
+# Originally written by Per Bothner.
#
# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
#
-# Please send patches to <config-patches@gnu.org>.
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
me=`echo "$0" | sed -e 's,.*/,,'`
@@ -50,7 +50,7 @@ version="\
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright 1992-2017 Free Software Foundation, Inc.
+Copyright 1992-2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -168,29 +168,19 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
# Note: NetBSD doesn't particularly care about the vendor
# portion of the name. We always set it to "unknown".
sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
- /sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || \
- echo unknown)`
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
case "${UNAME_MACHINE_ARCH}" in
armeb) machine=armeb-unknown ;;
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
sh5el) machine=sh5le-unknown ;;
- earmv*)
- arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
- endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'`
- machine=${arch}${endian}-unknown
- ;;
*) machine=${UNAME_MACHINE_ARCH}-unknown ;;
esac
# The Operating System including object format, if it has switched
- # to ELF recently (or will in the future) and ABI.
+ # to ELF recently, or will in the future.
case "${UNAME_MACHINE_ARCH}" in
- earm*)
- os=netbsdelf
- ;;
arm*|i386|m68k|ns32k|sh3*|sparc|vax)
eval $set_cc_for_build
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
@@ -207,13 +197,6 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
os=netbsd
;;
esac
- # Determine ABI tags.
- case "${UNAME_MACHINE_ARCH}" in
- earm*)
- expr='s/^earmv[0-9]/-eabi/;s/eb$//'
- abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"`
- ;;
- esac
# The OS release
# Debian GNU/NetBSD machines have a different userland, and
# thus, need a distinct triplet. However, they do not need
@@ -224,13 +207,13 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
release='-gnu'
;;
*)
- release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2`
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
;;
esac
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}${abi}"
+ echo "${machine}-${os}${release}"
exit ;;
*:Bitrig:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
@@ -240,10 +223,6 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
exit ;;
- *:LibertyBSD:*:*)
- UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
- echo ${UNAME_MACHINE_ARCH}-unknown-libertybsd${UNAME_RELEASE}
- exit ;;
*:ekkoBSD:*:*)
echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
exit ;;
@@ -256,9 +235,6 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
*:MirBSD:*:*)
echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
exit ;;
- *:Sortix:*:*)
- echo ${UNAME_MACHINE}-unknown-sortix
- exit ;;
alpha:OSF1:*:*)
case $UNAME_RELEASE in
*4.0)
@@ -275,42 +251,42 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
case "$ALPHA_CPU_TYPE" in
"EV4 (21064)")
- UNAME_MACHINE=alpha ;;
+ UNAME_MACHINE="alpha" ;;
"EV4.5 (21064)")
- UNAME_MACHINE=alpha ;;
+ UNAME_MACHINE="alpha" ;;
"LCA4 (21066/21068)")
- UNAME_MACHINE=alpha ;;
+ UNAME_MACHINE="alpha" ;;
"EV5 (21164)")
- UNAME_MACHINE=alphaev5 ;;
+ UNAME_MACHINE="alphaev5" ;;
"EV5.6 (21164A)")
- UNAME_MACHINE=alphaev56 ;;
+ UNAME_MACHINE="alphaev56" ;;
"EV5.6 (21164PC)")
- UNAME_MACHINE=alphapca56 ;;
+ UNAME_MACHINE="alphapca56" ;;
"EV5.7 (21164PC)")
- UNAME_MACHINE=alphapca57 ;;
+ UNAME_MACHINE="alphapca57" ;;
"EV6 (21264)")
- UNAME_MACHINE=alphaev6 ;;
+ UNAME_MACHINE="alphaev6" ;;
"EV6.7 (21264A)")
- UNAME_MACHINE=alphaev67 ;;
+ UNAME_MACHINE="alphaev67" ;;
"EV6.8CB (21264C)")
- UNAME_MACHINE=alphaev68 ;;
+ UNAME_MACHINE="alphaev68" ;;
"EV6.8AL (21264B)")
- UNAME_MACHINE=alphaev68 ;;
+ UNAME_MACHINE="alphaev68" ;;
"EV6.8CX (21264D)")
- UNAME_MACHINE=alphaev68 ;;
+ UNAME_MACHINE="alphaev68" ;;
"EV6.9A (21264/EV69A)")
- UNAME_MACHINE=alphaev69 ;;
+ UNAME_MACHINE="alphaev69" ;;
"EV7 (21364)")
- UNAME_MACHINE=alphaev7 ;;
+ UNAME_MACHINE="alphaev7" ;;
"EV7.9 (21364A)")
- UNAME_MACHINE=alphaev79 ;;
+ UNAME_MACHINE="alphaev79" ;;
esac
# A Pn.n version is a patched version.
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
exitcode=$?
trap '' 0
@@ -383,16 +359,16 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
exit ;;
i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
eval $set_cc_for_build
- SUN_ARCH=i386
+ SUN_ARCH="i386"
# If there is a compiler, see if it is configured for 64-bit objects.
# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
# This test works for both compilers.
- if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_64BIT_ARCH >/dev/null
then
- SUN_ARCH=x86_64
+ SUN_ARCH="x86_64"
fi
fi
echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
@@ -417,7 +393,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
exit ;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
case "`/bin/arch`" in
sun3)
echo m68k-sun-sunos${UNAME_RELEASE}
@@ -603,9 +579,8 @@ EOF
else
IBM_ARCH=powerpc
fi
- if [ -x /usr/bin/lslpp ] ; then
- IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
- awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
else
IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
@@ -642,13 +617,13 @@ EOF
sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
case "${sc_cpu_version}" in
- 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
- 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
532) # CPU_PA_RISC2_0
case "${sc_kernel_bits}" in
- 32) HP_ARCH=hppa2.0n ;;
- 64) HP_ARCH=hppa2.0w ;;
- '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
esac ;;
esac
fi
@@ -687,11 +662,11 @@ EOF
exit (0);
}
EOF
- (CCOPTS="" $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
test -z "$HP_ARCH" && HP_ARCH=hppa
fi ;;
esac
- if [ ${HP_ARCH} = hppa2.0w ]
+ if [ ${HP_ARCH} = "hppa2.0w" ]
then
eval $set_cc_for_build
@@ -704,12 +679,12 @@ EOF
# $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
# => hppa64-hp-hpux11.23
- if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
grep -q __LP64__
then
- HP_ARCH=hppa2.0w
+ HP_ARCH="hppa2.0w"
else
- HP_ARCH=hppa64
+ HP_ARCH="hppa64"
fi
fi
echo ${HP_ARCH}-hp-hpux${HPUX_REV}
@@ -814,14 +789,14 @@ EOF
echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit ;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
- FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit ;;
5000:UNIX_System_V:4.*:*)
- FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit ;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
@@ -903,7 +878,7 @@ EOF
exit ;;
*:GNU/*:*:*)
# other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
exit ;;
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
@@ -926,7 +901,7 @@ EOF
EV68*) UNAME_MACHINE=alphaev68 ;;
esac
objdump --private-headers /bin/sh | grep -q ld.so.1
- if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
+ if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
arc:Linux:*:* | arceb:Linux:*:*)
@@ -957,9 +932,6 @@ EOF
crisv32:Linux:*:*)
echo ${UNAME_MACHINE}-axis-linux-${LIBC}
exit ;;
- e2k:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
- exit ;;
frv:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
@@ -972,9 +944,6 @@ EOF
ia64:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
- k1om:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
- exit ;;
m32r*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
@@ -1000,9 +969,6 @@ EOF
eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
;;
- mips64el:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
- exit ;;
openrisc*:Linux:*:*)
echo or1k-unknown-linux-${LIBC}
exit ;;
@@ -1035,9 +1001,6 @@ EOF
ppcle:Linux:*:*)
echo powerpcle-unknown-linux-${LIBC}
exit ;;
- riscv32:Linux:*:* | riscv64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
- exit ;;
s390:Linux:*:* | s390x:Linux:*:*)
echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
exit ;;
@@ -1057,7 +1020,7 @@ EOF
echo ${UNAME_MACHINE}-dec-linux-${LIBC}
exit ;;
x86_64:Linux:*:*)
- echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
xtensa*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
@@ -1136,7 +1099,7 @@ EOF
# uname -m prints for DJGPP always 'pc', but it prints nothing about
# the processor, so we play safe by assuming i586.
# Note: whatever this is, it MUST be the same as what config.sub
- # prints for the "djgpp" host, or else GDB configure will decide that
+ # prints for the "djgpp" host, or else GDB configury will decide that
# this is a cross-build.
echo i586-pc-msdosdjgpp
exit ;;
@@ -1285,9 +1248,6 @@ EOF
SX-8R:SUPER-UX:*:*)
echo sx8r-nec-superux${UNAME_RELEASE}
exit ;;
- SX-ACE:SUPER-UX:*:*)
- echo sxace-nec-superux${UNAME_RELEASE}
- exit ;;
Power*:Rhapsody:*:*)
echo powerpc-apple-rhapsody${UNAME_RELEASE}
exit ;;
@@ -1301,9 +1261,9 @@ EOF
UNAME_PROCESSOR=powerpc
fi
if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
- if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_64BIT_ARCH >/dev/null
then
case $UNAME_PROCESSOR in
@@ -1325,7 +1285,7 @@ EOF
exit ;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = x86; then
+ if test "$UNAME_PROCESSOR" = "x86"; then
UNAME_PROCESSOR=i386
UNAME_MACHINE=pc
fi
@@ -1356,7 +1316,7 @@ EOF
# "uname -m" is not consistent, so use $cputype instead. 386
# is converted to i386 for consistency with other x86
# operating systems.
- if test "$cputype" = 386; then
+ if test "$cputype" = "386"; then
UNAME_MACHINE=i386
else
UNAME_MACHINE="$cputype"
@@ -1398,7 +1358,7 @@ EOF
echo i386-pc-xenix
exit ;;
i*86:skyos:*:*)
- echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE} | sed -e 's/ .*$//'`
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
exit ;;
i*86:rdos:*:*)
echo ${UNAME_MACHINE}-pc-rdos
@@ -1409,25 +1369,23 @@ EOF
x86_64:VMkernel:*:*)
echo ${UNAME_MACHINE}-unknown-esx
exit ;;
- amd64:Isilon\ OneFS:*:*)
- echo x86_64-unknown-onefs
- exit ;;
esac
cat >&2 <<EOF
$0: unable to guess system type
-This script (version $timestamp), has failed to recognize the
-operating system you are using. If your script is old, overwrite
-config.guess and config.sub with the latest versions from:
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
and
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-If $0 has already been updated, send the following data and any
-information you think might be pertinent to config-patches@gnu.org to
-provide the necessary information to handle your system.
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
config.guess timestamp = $timestamp
diff --git a/config.h b/config.h
new file mode 100644
index 0000000..3b5e0a0
--- /dev/null
+++ b/config.h
@@ -0,0 +1,110 @@
+/* config.h. Generated from config.h.in by configure. */
+/* config.h.in. Generated from configure.ac by autoheader. */
+
+/* Define to 1 if you have the <errno.h> header file. */
+#define HAVE_ERRNO_H 1
+
+/* Define to 1 if you have the <getopt.h> header file. */
+#define HAVE_GETOPT_H 1
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#define HAVE_INTTYPES_H 1
+
+/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
+ to 0 otherwise. */
+#define HAVE_MALLOC 1
+
+/* Define to 1 if you have the <memory.h> header file. */
+#define HAVE_MEMORY_H 1
+
+/* Define to 1 if you have the `memset' function. */
+#define HAVE_MEMSET 1
+
+/* Define to 1 if you have the `regcomp' function. */
+#define HAVE_REGCOMP 1
+
+/* Define to 1 if you have the <regex.h> header file. */
+#define HAVE_REGEX_H 1
+
+/* Define to 1 if `stat' has the bug that it succeeds when given the
+ zero-length file name argument. */
+/* #undef HAVE_STAT_EMPTY_STRING_BUG */
+
+/* Define to 1 if you have the <stdarg.h> header file. */
+#define HAVE_STDARG_H 1
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#define HAVE_STDINT_H 1
+
+/* Define to 1 if you have the <stdio.h> header file. */
+#define HAVE_STDIO_H 1
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the `strchr' function. */
+#define HAVE_STRCHR 1
+
+/* Define to 1 if you have the `strerror' function. */
+#define HAVE_STRERROR 1
+
+/* Define to 1 if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define to 1 if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if you have the `strstr' function. */
+#define HAVE_STRSTR 1
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#define HAVE_SYS_STAT_H 1
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define to 1 if you have the <time.h> header file. */
+#define HAVE_TIME_H 1
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#define HAVE_UNISTD_H 1
+
+/* Define to 1 if `lstat' dereferences a symlink specified with a trailing
+ slash. */
+#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1
+
+/* Name of package */
+#define PACKAGE "supercat"
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT "bug-spc@nosredna.net"
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "supercat"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "supercat 0.5.8"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "supercat"
+
+/* Define to the home page for this package. */
+#define PACKAGE_URL ""
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "0.5.8"
+
+/* Define to 1 if you have the ANSI C header files. */
+#define STDC_HEADERS 1
+
+/* Define to 1 if your <sys/time.h> declares `struct tm'. */
+/* #undef TM_IN_SYS_TIME */
+
+/* Version number of package */
+#define VERSION "0.5.8"
+
+/* Define to empty if `const' does not conform to ANSI C. */
+/* #undef const */
+
+/* Define to rpl_malloc if the replacement function should be used. */
+/* #undef malloc */
diff --git a/config.sub b/config.sub
index eaa5cf3..88a0cb4 100755
--- a/config.sub
+++ b/config.sub
@@ -1,8 +1,8 @@
#! /bin/sh
# Configuration validation subroutine script.
-# Copyright 1992-2017 Free Software Foundation, Inc.
+# Copyright 1992-2014 Free Software Foundation, Inc.
-timestamp='2017-01-01'
+timestamp='2014-07-28'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -25,7 +25,7 @@ timestamp='2017-01-01'
# of the GNU General Public License, version 3 ("GPLv3").
-# Please send patches to <config-patches@gnu.org>.
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
@@ -33,7 +33,7 @@ timestamp='2017-01-01'
# Otherwise, we print the canonical config type on stdout and succeed.
# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
@@ -53,7 +53,8 @@ timestamp='2017-01-01'
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
Canonicalize a configuration name.
@@ -67,7 +68,7 @@ Report bugs and patches to <config-patches@gnu.org>."
version="\
GNU config.sub ($timestamp)
-Copyright 1992-2017 Free Software Foundation, Inc.
+Copyright 1992-2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -116,10 +117,9 @@ maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
- knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \
- kopensolaris*-gnu* | cloudabi*-eabi* | \
- storm-chaos* | os2-emx* | rtmk-nova* | \
- windows-gnu* | windows-cygnus* | windows-msvc* | windows-itanium*)
+ knetbsd*-gnu* | netbsd*-gnu* | \
+ kopensolaris*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
@@ -255,13 +255,12 @@ case $basic_machine in
| arc | arceb \
| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
| avr | avr32 \
- | ba \
| be32 | be64 \
| bfin \
| c4x | c8051 | clipper \
| d10v | d30v | dlx | dsp16xx \
- | e2k | epiphany \
- | fido | fr30 | frv | ft32 \
+ | epiphany \
+ | fido | fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| hexagon \
| i370 | i860 | i960 | ia64 \
@@ -302,12 +301,10 @@ case $basic_machine in
| open8 | or1k | or1knd | or32 \
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle \
- | pru \
| pyramid \
- | riscv32 | riscv64 \
| rl78 | rx \
| score \
- | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
@@ -315,7 +312,6 @@ case $basic_machine in
| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
| ubicom32 \
| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
- | visium \
| we32k \
| x86 | xc16x | xstormy16 | xtensa \
| z8k | z80)
@@ -330,9 +326,6 @@ case $basic_machine in
c6x)
basic_machine=tic6x-unknown
;;
- leon|leon[3-9])
- basic_machine=sparc-$basic_machine
- ;;
m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
basic_machine=$basic_machine-unknown
os=-none
@@ -378,13 +371,12 @@ case $basic_machine in
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* | avr32-* \
- | ba-* \
| be32-* | be64-* \
| bfin-* | bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c4x-* \
| c8051-* | clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
- | e2k-* | elxsi-* \
+ | elxsi-* \
| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
@@ -430,15 +422,13 @@ case $basic_machine in
| orion-* \
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
- | pru-* \
| pyramid-* \
- | riscv32-* | riscv64-* \
| rl78-* | romp-* | rs6000-* | rx-* \
| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
| sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
| tahoe-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
| tile*-* \
@@ -446,7 +436,6 @@ case $basic_machine in
| ubicom32-* \
| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
| vax-* \
- | visium-* \
| we32k-* \
| x86-* | x86_64-* | xc16x-* | xps100-* \
| xstormy16-* | xtensa*-* \
@@ -523,9 +512,6 @@ case $basic_machine in
basic_machine=i386-pc
os=-aros
;;
- asmjs)
- basic_machine=asmjs-unknown
- ;;
aux)
basic_machine=m68k-apple
os=-aux
@@ -646,14 +632,6 @@ case $basic_machine in
basic_machine=m68k-bull
os=-sysv3
;;
- e500v[12])
- basic_machine=powerpc-unknown
- os=$os"spe"
- ;;
- e500v[12]-*)
- basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
- os=$os"spe"
- ;;
ebmon29k)
basic_machine=a29k-amd
os=-ebmon
@@ -795,9 +773,6 @@ case $basic_machine in
basic_machine=m68k-isi
os=-sysv
;;
- leon-*|leon[3-9]-*)
- basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
- ;;
m68knommu)
basic_machine=m68k-unknown
os=-linux
@@ -1033,7 +1008,7 @@ case $basic_machine in
ppc-* | ppcbe-*)
basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
- ppcle | powerpclittle)
+ ppcle | powerpclittle | ppc-le | powerpc-little)
basic_machine=powerpcle-unknown
;;
ppcle-* | powerpclittle-*)
@@ -1043,7 +1018,7 @@ case $basic_machine in
;;
ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
- ppc64le | powerpc64little)
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
basic_machine=powerpc64le-unknown
;;
ppc64le-* | powerpc64little-*)
@@ -1389,18 +1364,18 @@ case $os in
| -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
| -sym* | -kopensolaris* | -plan9* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* | -aros* | -cloudabi* | -sortix* \
+ | -aos* | -aros* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
| -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
- | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \
+ | -bitrig* | -openbsd* | -solidbsd* \
| -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
| -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
| -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+ | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
| -linux-newlib* | -linux-musl* | -linux-uclibc* \
| -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
| -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
@@ -1409,8 +1384,7 @@ case $os in
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \
- | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox*)
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@@ -1542,8 +1516,6 @@ case $os in
;;
-nacl*)
;;
- -ios)
- ;;
-none)
;;
*)
@@ -1639,9 +1611,6 @@ case $basic_machine in
sparc-* | *-sun)
os=-sunos4.1.1
;;
- pru-*)
- os=-elf
- ;;
*-be)
os=-beos
;;
diff --git a/configure b/configure
index a6bc135..12ac526 100755
--- a/configure
+++ b/configure
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for supercat 0.5.7.
+# Generated by GNU Autoconf 2.69 for supercat 0.5.8.
#
# Report bugs to <bug-spc@nosredna.net>.
#
@@ -580,8 +580,8 @@ MAKEFLAGS=
# Identity of this package.
PACKAGE_NAME='supercat'
PACKAGE_TARNAME='supercat'
-PACKAGE_VERSION='0.5.7'
-PACKAGE_STRING='supercat 0.5.7'
+PACKAGE_VERSION='0.5.8'
+PACKAGE_STRING='supercat 0.5.8'
PACKAGE_BUGREPORT='bug-spc@nosredna.net'
PACKAGE_URL=''
@@ -645,6 +645,7 @@ am__nodep
AMDEPBACKSLASH
AMDEP_FALSE
AMDEP_TRUE
+am__quote
am__include
DEPDIR
OBJEXT
@@ -718,8 +719,7 @@ PACKAGE_VERSION
PACKAGE_TARNAME
PACKAGE_NAME
PATH_SEPARATOR
-SHELL
-am__quote'
+SHELL'
ac_subst_files=''
ac_user_opts='
enable_option_checking
@@ -1276,7 +1276,7 @@ if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures supercat 0.5.7 to adapt to many kinds of systems.
+\`configure' configures supercat 0.5.8 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1346,7 +1346,7 @@ fi
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of supercat 0.5.7:";;
+ short | recursive ) echo "Configuration of supercat 0.5.8:";;
esac
cat <<\_ACEOF
@@ -1444,7 +1444,7 @@ fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-supercat configure 0.5.7
+supercat configure 0.5.8
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
@@ -1813,7 +1813,7 @@ cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by supercat $as_me 0.5.7, which was
+It was created by supercat $as_me 0.5.8, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@@ -2161,7 +2161,7 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-am__api_version='1.16'
+am__api_version='1.15'
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
@@ -2676,7 +2676,7 @@ fi
# Define the identity of the package.
PACKAGE='supercat'
- VERSION='0.5.7'
+ VERSION='0.5.8'
cat >>confdefs.h <<_ACEOF
@@ -2706,8 +2706,8 @@ MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
-# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
mkdir_p='$(MKDIR_P)'
# We need awk for the "check" target (and possibly the TAP driver). The
@@ -2758,7 +2758,7 @@ END
Aborting the configuration process, to ensure you take notice of the issue.
You can download and install GNU coreutils to get an 'rm' implementation
-that behaves properly: <https://www.gnu.org/software/coreutils/>.
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
@@ -3626,45 +3626,45 @@ DEPDIR="${am__leading_dot}deps"
ac_config_commands="$ac_config_commands depfiles"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5
-$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; }
-cat > confinc.mk << 'END'
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
am__doit:
- @echo this is the am__doit target >confinc.out
+ @echo this is the am__doit target
.PHONY: am__doit
END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
am__include="#"
am__quote=
-# BSD make does it like this.
-echo '.include "confinc.mk" # ignored' > confmf.BSD
-# Other make implementations (GNU, Solaris 10, AIX) do it like this.
-echo 'include confinc.mk # ignored' > confmf.GNU
-_am_result=no
-for s in GNU BSD; do
- { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5
- (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- case $?:`cat confinc.out 2>/dev/null` in #(
- '0:this is the am__doit target') :
- case $s in #(
- BSD) :
- am__include='.include' am__quote='"' ;; #(
- *) :
- am__include='include' am__quote='' ;;
-esac ;; #(
- *) :
- ;;
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
esac
- if test "$am__include" != "#"; then
- _am_result="yes ($s style)"
- break
- fi
-done
-rm -f confinc.* confmf.*
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5
-$as_echo "${_am_result}" >&6; }
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
# Check whether --enable-dependency-tracking was given.
if test "${enable_dependency_tracking+set}" = set; then :
@@ -5163,7 +5163,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by supercat $as_me 0.5.7, which was
+This file was extended by supercat $as_me 0.5.8, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -5229,7 +5229,7 @@ _ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-supercat config.status 0.5.7
+supercat config.status 0.5.8
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
@@ -5348,7 +5348,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
#
# INIT-COMMANDS
#
-AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
_ACEOF
@@ -5963,35 +5963,29 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
# Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
- # TODO: see whether this extra hack can be removed once we start
- # requiring Autoconf 2.70 or later.
- case $CONFIG_FILES in #(
- *\'*) :
- eval set x "$CONFIG_FILES" ;; #(
- *) :
- set x $CONFIG_FILES ;; #(
- *) :
- ;;
-esac
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
shift
- # Used to flag and report bootstrapping failures.
- am_rc=0
- for am_mf
+ for mf
do
# Strip MF so we end up with the name of the file.
- am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile which includes
- # dependency-tracking related rules and includes.
- # Grep'ing the whole file directly is not great: AIX grep has a line
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
- sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
- || continue
- am_dirpart=`$as_dirname -- "$am_mf" ||
-$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$am_mf" : 'X\(//\)[^/]' \| \
- X"$am_mf" : 'X\(//\)$' \| \
- X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$am_mf" |
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
@@ -6009,48 +6003,53 @@ $as_echo X"$am_mf" |
q
}
s/.*/./; q'`
- am_filepart=`$as_basename -- "$am_mf" ||
-$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \
- X"$am_mf" : 'X\(//\)$' \| \
- X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$am_mf" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "$am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
- /^X\/\(\/\/\)$/{
+ /^X\(\/\/\)[^/].*/{
s//\1/
q
}
- /^X\/\(\/\).*/{
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
- { echo "$as_me:$LINENO: cd "$am_dirpart" \
- && sed -e '/# am--include-marker/d' "$am_filepart" \
- | $MAKE -f - am--depfiles" >&5
- (cd "$am_dirpart" \
- && sed -e '/# am--include-marker/d' "$am_filepart" \
- | $MAKE -f - am--depfiles) >&5 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } || am_rc=$?
+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
done
- if test $am_rc -ne 0; then
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "Something went wrong bootstrapping makefile fragments
- for automatic dependency tracking. Try re-running configure with the
- '--disable-dependency-tracking' option to at least be able to build
- the package (albeit without support for automatic dependency tracking).
-See \`config.log' for more details" "$LINENO" 5; }
- fi
- { am_dirpart=; unset am_dirpart;}
- { am_filepart=; unset am_filepart;}
- { am_mf=; unset am_mf;}
- { am_rc=; unset am_rc;}
- rm -f conftest-deps.mk
}
;;
diff --git a/configure.ac b/configure.ac
index 42d4e6a..eb4e308 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,4 +1,4 @@
-AC_INIT(supercat, 0.5.7, bug-spc@nosredna.net)
+AC_INIT(supercat, 0.5.6, bug-spc@nosredna.net)
AM_INIT_AUTOMAKE([-Wall -Werror foreign])
AC_LANG([C])
AC_PROG_CC
diff --git a/debian/changelog b/debian/changelog
index db63584..573d448 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,10 +1,11 @@
-supercat (0.5.7-2) UNRELEASED; urgency=medium
+supercat (0.5.8-1) UNRELEASED; urgency=medium
* Use secure URI in Homepage field.
* Set debhelper-compat version in Build-Depends.
* Update standards version to 4.6.0, no changes needed.
+ * New upstream release.
- -- Debian Janitor <janitor@jelmer.uk> Tue, 12 Oct 2021 10:48:11 -0000
+ -- Debian Janitor <janitor@jelmer.uk> Fri, 21 Oct 2022 06:17:44 -0000
supercat (0.5.7-1) unstable; urgency=medium
diff --git a/debian/patches/nmu1.diff b/debian/patches/nmu1.diff
index cdcf1a1..57ab18d 100644
--- a/debian/patches/nmu1.diff
+++ b/debian/patches/nmu1.diff
@@ -8,8 +8,10 @@ Last-Update: 2016-08-02
---
---- supercat-0.5.5.orig/spcrc/Makefile.am
-+++ supercat-0.5.5/spcrc/Makefile.am
+Index: supercat.git/spcrc/Makefile.am
+===================================================================
+--- supercat.git.orig/spcrc/Makefile.am
++++ supercat.git/spcrc/Makefile.am
@@ -2,6 +2,7 @@ SUBDIRS = .
instdir = $(SYSTEM_DIRECTORY)
@@ -19,8 +21,10 @@ Last-Update: 2016-08-02
+spcrc-dpkg-l spcrc-package
EXTRA_DIST = $(spc_doc)
inst_DATA = $(spc_doc)
+Index: supercat.git/spcrc/spcrc-dpkg-l
+===================================================================
--- /dev/null
-+++ supercat-0.5.5/spcrc/spcrc-dpkg-l
++++ supercat.git/spcrc/spcrc-dpkg-l
@@ -0,0 +1,22 @@
+# HTML COLOR NAME COL A N T STRING or REGULAR EXPRESSION
+#################### ### # # # ################################################################
@@ -44,8 +48,10 @@ Last-Update: 2016-08-02
+Magenta mag 1 ^.([cHUFWt])
+# Errors
+Red red b 1 ^([uirph][ncHUFWti]R.*)
+Index: supercat.git/spcrc/spcrc-package
+===================================================================
--- /dev/null
-+++ supercat-0.5.5/spcrc/spcrc-package
++++ supercat.git/spcrc/spcrc-package
@@ -0,0 +1,12 @@
+# HTML COLOR NAME COL A N T STRING or REGULAR EXPRESSION
+#################### ### # # # ################################################################
diff --git a/depcomp b/depcomp
index 65cbf70..ca5ea4e 100755
--- a/depcomp
+++ b/depcomp
@@ -1,9 +1,10 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2018-03-07.03; # UTC
+scriptversion=2006-10-15.18
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
+# Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -16,7 +17,9 @@ scriptversion=2018-03-07.03; # UTC
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <https://www.gnu.org/licenses/>.
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -27,9 +30,9 @@ scriptversion=2018-03-07.03; # UTC
case $1 in
'')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
- exit 1;
- ;;
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
@@ -39,11 +42,11 @@ as side-effects.
Environment variables:
depmode Dependency tracking mode.
- source Source file read by 'PROGRAMS ARGS'.
- object Object file output by 'PROGRAMS ARGS'.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputting dependencies.
+ tmpdepfile Temporary file to use when outputing dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to <bug-automake@gnu.org>.
@@ -56,66 +59,6 @@ EOF
;;
esac
-# Get the directory component of the given path, and save it in the
-# global variables '$dir'. Note that this directory component will
-# be either empty or ending with a '/' character. This is deliberate.
-set_dir_from ()
-{
- case $1 in
- */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
- *) dir=;;
- esac
-}
-
-# Get the suffix-stripped basename of the given path, and save it the
-# global variable '$base'.
-set_base_from ()
-{
- base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
-}
-
-# If no dependency file was actually created by the compiler invocation,
-# we still have to create a dummy depfile, to avoid errors with the
-# Makefile "include basename.Plo" scheme.
-make_dummy_depfile ()
-{
- echo "#dummy" > "$depfile"
-}
-
-# Factor out some common post-processing of the generated depfile.
-# Requires the auxiliary global variable '$tmpdepfile' to be set.
-aix_post_process_depfile ()
-{
- # If the compiler actually managed to produce a dependency file,
- # post-process it.
- if test -f "$tmpdepfile"; then
- # Each line is of the form 'foo.o: dependency.h'.
- # Do two passes, one to just change these to
- # $object: dependency.h
- # and one to simply output
- # dependency.h:
- # which is needed to avoid the deleted-header problem.
- { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
- sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
- } > "$depfile"
- rm -f "$tmpdepfile"
- else
- make_dummy_depfile
- fi
-}
-
-# A tabulation character.
-tab=' '
-# A newline character.
-nl='
-'
-# Character ranges might be problematic outside the C locale.
-# These definitions help.
-upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
-lower=abcdefghijklmnopqrstuvwxyz
-digits=0123456789
-alpha=${upper}${lower}
-
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
@@ -128,9 +71,6 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
-# Avoid interferences from the environment.
-gccflag= dashmflag=
-
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
@@ -142,32 +82,9 @@ if test "$depmode" = hp; then
fi
if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvisualcpp
-fi
-
-if test "$depmode" = msvc7msys; then
- # This is just like msvc7 but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvc7
-fi
-
-if test "$depmode" = xlc; then
- # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
- gccflag=-qmakedep=gcc,-MF
- depmode=gcc
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
fi
case "$depmode" in
@@ -190,7 +107,8 @@ gcc3)
done
"$@"
stat=$?
- if test $stat -ne 0; then
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile"
exit $stat
fi
@@ -198,17 +116,13 @@ gcc3)
;;
gcc)
-## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
-## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
-## (see the conditional assignment to $gccflag above).
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say). Also, it might not be
-## supported by the other compilers which use the 'gcc' depmode.
+## -MM, not -M (despite what the docs say).
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
@@ -216,31 +130,31 @@ gcc)
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
- if test $stat -ne 0; then
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- # The second -e expression handles DOS-style file names with drive
- # letters.
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the "deleted header file" problem.
+## This next piece of magic avoids the `deleted header file' problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
-## Some versions of gcc put a space before the ':'. On the theory
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
## that the space means something, we add a space to the output as
-## well. hp depmode also adds that space, but also prefixes the VPATH
-## to the object. Take care to not repeat it in the output.
+## well.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -258,7 +172,8 @@ sgi)
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
- if test $stat -ne 0; then
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile"
exit $stat
fi
@@ -266,156 +181,99 @@ sgi)
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
+
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like '#:fec' to the end of the
+ # the IRIX cc adds comments like `#:fec' to the end of the
# dependency line.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
- | tr "$nl" ' ' >> "$depfile"
- echo >> "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+' ' ' >> $depfile
+ echo >> $depfile
+
# The second pass generates a dummy entry for each header file.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> $depfile
else
- make_dummy_depfile
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
-xlc)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts '$object:' at the
+ # current directory. Also, the AIX compiler puts `$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
- set_dir_from "$object"
- set_base_from "$object"
+ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+ tmpdepfile="$stripped.u"
if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$base.u
- tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$dir$base.u
- tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- exit $stat
- fi
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- do
- test -f "$tmpdepfile" && break
- done
- aix_post_process_depfile
- ;;
+ if test -f "$tmpdepfile"; then :
+ else
+ stripped=`echo "$stripped" | sed 's,^.*/,,'`
+ tmpdepfile="$stripped.u"
+ fi
-tcc)
- # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
- # FIXME: That version still under development at the moment of writing.
- # Make that this statement remains true also for stable, released
- # versions.
- # It will wrap lines (doesn't matter whether long or short) with a
- # trailing '\', as in:
- #
- # foo.o : \
- # foo.c \
- # foo.h \
- #
- # It will put a trailing '\' even on the last line, and will use leading
- # spaces rather than leading tabs (at least since its commit 0394caf7
- # "Emit spaces for -MD").
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -ne 0; then
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile"
exit $stat
fi
- rm -f "$depfile"
- # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
- # We have to change lines of the first kind to '$object: \'.
- sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
- # And for each line of the second kind, we have to emit a 'dep.h:'
- # dummy dependency, to avoid the deleted-header problem.
- sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+
+ if test -f "$tmpdepfile"; then
+ outname="$stripped.o"
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
rm -f "$tmpdepfile"
;;
-## The order of this option in the case statement is important, since the
-## shell code in configure will try each of these formats in the order
-## listed in this file. A plain '-MD' option would be understood by many
-## compilers, so we must ensure this comes after the gcc and icc options.
-pgcc)
- # Portland's C compiler understands '-MD'.
- # Will always output deps to 'file.d' where file is the root name of the
- # source file under compilation, even if file resides in a subdirectory.
- # The object file name does not affect the name of the '.d' file.
- # pgcc 10.2 will output
+icc)
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
# foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using '\' :
+ # and will wrap long lines using \ :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
- set_dir_from "$object"
- # Use the source, not the object, to determine the base name, since
- # that's sadly what pgcc will do too.
- set_base_from "$source"
- tmpdepfile=$base.d
-
- # For projects that build the same source file twice into different object
- # files, the pgcc approach of using the *source* file root name can cause
- # problems in parallel builds. Use a locking strategy to avoid stomping on
- # the same $tmpdepfile.
- lockdir=$base.d-lock
- trap "
- echo '$0: caught signal, cleaning up...' >&2
- rmdir '$lockdir'
- exit 1
- " 1 2 13 15
- numtries=100
- i=$numtries
- while test $i -gt 0; do
- # mkdir is a portable test-and-set.
- if mkdir "$lockdir" 2>/dev/null; then
- # This process acquired the lock.
- "$@" -MD
- stat=$?
- # Release the lock.
- rmdir "$lockdir"
- break
- else
- # If the lock is being held by a different process, wait
- # until the winning process is done or we timeout.
- while test -d "$lockdir" && test $i -gt 0; do
- sleep 1
- i=`expr $i - 1`
- done
- fi
- i=`expr $i - 1`
- done
- trap - 1 2 13 15
- if test $i -le 0; then
- echo "$0: failed to acquire lock after $numtries attempts" >&2
- echo "$0: check lockdir '$lockdir'" >&2
- exit 1
- fi
- if test $stat -ne 0; then
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile"
exit $stat
fi
@@ -427,8 +285,8 @@ pgcc)
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
- | sed -e 's/$/ :/' >> "$depfile"
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -439,8 +297,9 @@ hp2)
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
- set_dir_from "$object"
- set_base_from "$object"
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
@@ -451,7 +310,8 @@ hp2)
"$@" +Maked
fi
stat=$?
- if test $stat -ne 0; then
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
@@ -461,107 +321,72 @@ hp2)
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add 'dependent.h:' lines.
- sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add `dependent.h:' lines.
+ sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
else
- make_dummy_depfile
+ echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in 'foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- set_dir_from "$object"
- set_base_from "$object"
-
- if test "$libtool" = yes; then
- # Libtool generates 2 separate objects for the 2 libraries. These
- # two compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir$base.o.d # libtool 1.5
- tmpdepfile2=$dir.libs/$base.o.d # Likewise.
- tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- do
- test -f "$tmpdepfile" && break
- done
- # Same post-processing that is required for AIX mode.
- aix_post_process_depfile
- ;;
-
-msvc7)
- if test "$libtool" = yes; then
- showIncludes=-Wc,-showIncludes
- else
- showIncludes=-showIncludes
- fi
- "$@" $showIncludes > "$tmpdepfile"
- stat=$?
- grep -v '^Note: including file: ' "$tmpdepfile"
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- # The first sed program below extracts the file names and escapes
- # backslashes for cygpath. The second sed program outputs the file
- # name when reading, but also accumulates all include files in the
- # hold buffer in order to output them again at the end. This only
- # works with sed implementations that can handle large buffers.
- sed < "$tmpdepfile" -n '
-/^Note: including file: *\(.*\)/ {
- s//\1/
- s/\\/\\\\/g
- p
-}' | $cygpath_u | sort -u | sed -n '
-s/ /\\ /g
-s/\(.*\)/'"$tab"'\1 \\/p
-s/.\(.*\) \\/\1:/
-H
-$ {
- s/.*/'"$tab"'/
- G
- p
-}' >> "$depfile"
- echo >> "$depfile" # make sure the fragment doesn't end with a backslash
- rm -f "$tmpdepfile"
- ;;
-
-msvc7msys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
@@ -574,13 +399,13 @@ dashmstdout)
# Remove the call to Libtool.
if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
+ while test $1 != '--mode=compile'; do
shift
done
shift
fi
- # Remove '-o $object'.
+ # Remove `-o $object'.
IFS=" "
for arg
do
@@ -600,18 +425,18 @@ dashmstdout)
done
test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for ':'
+ # Require at least two characters before searching for `:'
# in the target name. This is to cope with DOS-style filenames:
- # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
"$@" $dashmflag |
- sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this sed invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -625,51 +450,41 @@ makedepend)
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
+ while test $1 != '--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
- cleared=no eat=no
- for arg
- do
+ cleared=no
+ for arg in "$@"; do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
- if test $eat = yes; then
- eat=no
- continue
- fi
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
- -arch)
- eat=yes ;;
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
- obj_suffix=`echo "$object" | sed 's/^.*\././'`
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
- # makedepend may prepend the VPATH from the source file name to the object.
- # No need to regex-escape $object, excess matching of '.' is harmless.
- sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process the last invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed '1,2d' "$tmpdepfile" \
- | tr ' ' "$nl" \
- | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
@@ -680,13 +495,13 @@ cpp)
# Remove the call to Libtool.
if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
+ while test $1 != '--mode=compile'; do
shift
done
shift
fi
- # Remove '-o $object'.
+ # Remove `-o $object'.
IFS=" "
for arg
do
@@ -705,10 +520,10 @@ cpp)
esac
done
- "$@" -E \
- | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- | sed '$ s: \\$::' > "$tmpdepfile"
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
@@ -718,56 +533,35 @@ cpp)
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
+ # always write the preprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
"$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
IFS=" "
for arg
do
case "$arg" in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
+ set fnord "$@"
+ shift
+ shift
+ ;;
*)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
esac
done
- "$@" -E 2>/dev/null |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
- echo "$tab" >> "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
-msvcmsys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
none)
exec "$@"
;;
@@ -783,9 +577,8 @@ exit 0
# Local Variables:
# mode: shell-script
# sh-indentation: 2
-# eval: (add-hook 'before-save-hook 'time-stamp)
+# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
+# time-stamp-end: "$"
# End:
diff --git a/doc/Makefile.in b/doc/Makefile.in
index ec8867f..d587b4c 100644
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -162,7 +162,7 @@ am__recursive_targets = \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
- distdir distdir-am
+ distdir
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
@@ -329,8 +329,8 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -484,10 +484,7 @@ cscopelist-am: $(am__tagged_files)
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-distdir: $(BUILT_SOURCES)
- $(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
+distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
diff --git a/doc/spc.1 b/doc/spc.1
index eff771d..d671b2e 100644
--- a/doc/spc.1
+++ b/doc/spc.1
@@ -1,10 +1,18 @@
.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.35.
-.TH SPC "1" "January 2020" "spc 0.5.7" "User Commands"
+.TH SPC "1" "January 2022" "spc 0.5.8" "User Commands"
.SH NAME
spc \- colorize and print to standard output
.SH SYNOPSIS
.B spc
-[\fIOPTION\fR] [\-c file|\-C directory] [\-t type] [\fIFILE\fR]...
+[\fIOPTION\fR] [\fIFILE\fR]...
+.br
+ [\-c file|\-C directory]
+.br
+ [\-t type]
+.br
+ [\-e color|(RE)]
+.br
+ [\-E color,attribute,count,type|(RE)]
.SH DESCRIPTION
.\" Add any additional description here
.PP
@@ -20,8 +28,11 @@ specify non-standard config file directory
\fB\-d \fB\ | \fB\-\-debug\fR
turn on debug information (multi-level \-d \-d ...)
.TP
-\fB\-D \fB\ | \fB\-\-no\-extension\fR
-don't look at ./.spcrc[\-ext] for config file
+\fB\-e \fB\ | \fB\-\-cmd\-s\fR
+short-form command-line color instruction
+.TP
+\fB\-E \fB\ | \fB\-\-cmd\-l\fR
+long-form command-line color instruction
.TP
\fB\-h \fB\ | \fB\-\-help\fR
display this help and exit
diff --git a/install-sh b/install-sh
index 8175c64..4fbbae7 100755
--- a/install-sh
+++ b/install-sh
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2018-03-11.20; # UTC
+scriptversion=2006-10-14.15
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,57 +35,57 @@ scriptversion=2018-03-11.20; # UTC
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
-# 'make' implicit rules from creating a file called install from it
+# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
-tab=' '
nl='
'
-IFS=" $tab$nl"
+IFS=" "" $nl"
-# Set DOITPROG to "echo" to test this script.
+# set DOITPROG to echo to test this script
-doit=${DOITPROG-}
-doit_exec=${doit:-exec}
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+posix_glob=
posix_mkdir=
# Desired mode of installed file.
mode=0755
-chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
+chgrpcmd=
stripcmd=
-
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
src=
dst=
dir_arg=
-dst_arg=
+dstarg=
+no_target_directory=
-copy_on_change=false
-is_target_a_directory=possibly
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
@@ -95,101 +95,91 @@ In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
- --help display this help and exit.
- --version display version info and exit.
-
- -c (ignored)
- -C install only if different (preserve the last data modification time)
- -d create directories instead of installing files.
- -g GROUP $chgrpprog installed files to GROUP.
- -m MODE $chmodprog installed files to MODE.
- -o USER $chownprog installed files to USER.
- -s $stripprog installed files.
- -t DIRECTORY install into DIRECTORY.
- -T report an error if DSTFILE is a directory.
+-c (ignored)
+-d create directories instead of installing files.
+-g GROUP $chgrpprog installed files to GROUP.
+-m MODE $chmodprog installed files to MODE.
+-o USER $chownprog installed files to USER.
+-s $stripprog installed files.
+-t DIRECTORY install into DIRECTORY.
+-T report an error if DSTFILE is a directory.
+--help display this help and exit.
+--version display version info and exit.
Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
- RMPROG STRIPPROG
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
"
while test $# -ne 0; do
case $1 in
- -c) ;;
-
- -C) copy_on_change=true;;
+ -c) shift
+ continue;;
- -d) dir_arg=true;;
+ -d) dir_arg=true
+ shift
+ continue;;
-g) chgrpcmd="$chgrpprog $2"
- shift;;
+ shift
+ shift
+ continue;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
- case $mode in
- *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
+ shift
+ shift
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ continue;;
-o) chowncmd="$chownprog $2"
- shift;;
+ shift
+ shift
+ continue;;
- -s) stripcmd=$stripprog;;
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
- -t)
- is_target_a_directory=always
- dst_arg=$2
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
- shift;;
+ -t) dstarg=$2
+ shift
+ shift
+ continue;;
- -T) is_target_a_directory=never;;
+ -T) no_target_directory=true
+ shift
+ continue;;
--version) echo "$0 $scriptversion"; exit $?;;
- --) shift
- break;;
+ --) shift
+ break;;
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
*) break;;
esac
- shift
done
-# We allow the use of options -d and -T together, by making -d
-# take the precedence; this is for compatibility with GNU install.
-
-if test -n "$dir_arg"; then
- if test -n "$dst_arg"; then
- echo "$0: target directory not allowed when installing a directory." >&2
- exit 1
- fi
-fi
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
- if test -n "$dst_arg"; then
+ if test -n "$dstarg"; then
# $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dst_arg"
+ set fnord "$@" "$dstarg"
shift # fnord
fi
shift # arg
- dst_arg=$arg
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
+ dstarg=$arg
done
fi
@@ -198,26 +188,13 @@ if test $# -eq 0; then
echo "$0: no input file specified." >&2
exit 1
fi
- # It's OK to call 'install-sh -d' without argument.
+ # It's OK to call `install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
- if test $# -gt 1 || test "$is_target_a_directory" = always; then
- if test ! -d "$dst_arg"; then
- echo "$0: $dst_arg: Is not a directory." >&2
- exit 1
- fi
- fi
-fi
-
-if test -z "$dir_arg"; then
- do_exit='(exit $ret); exit $ret'
- trap "ret=129; $do_exit" 1
- trap "ret=130; $do_exit" 2
- trap "ret=141; $do_exit" 13
- trap "ret=143; $do_exit" 15
+ trap '(exit $?); exit' 1 2 13 15
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
@@ -228,16 +205,16 @@ if test -z "$dir_arg"; then
*[0-7])
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw='% 200'
+ u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw=,u+rw
+ u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
@@ -245,9 +222,9 @@ fi
for src
do
- # Protect names problematic for 'test' and other utilities.
+ # Protect names starting with `-'.
case $src in
- -* | [=\(\)!]) src=./$src;;
+ -*) src=./$src ;;
esac
if test -n "$dir_arg"; then
@@ -265,119 +242,133 @@ do
exit 1
fi
- if test -z "$dst_arg"; then
+ if test -z "$dstarg"; then
echo "$0: no destination specified." >&2
exit 1
fi
- dst=$dst_arg
- # If destination is a directory, append the input filename.
+ dst=$dstarg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst ;;
+ esac
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
if test -d "$dst"; then
- if test "$is_target_a_directory" = never; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
+ if test -n "$no_target_directory"; then
+ echo "$0: $dstarg: Is a directory" >&2
+ exit 1
fi
dstdir=$dst
- dstbase=`basename "$src"`
- case $dst in
- */) dst=$dst$dstbase;;
- *) dst=$dst/$dstbase;;
- esac
+ dst=$dstdir/`basename "$src"`
dstdir_status=0
else
- dstdir=`dirname "$dst"`
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
test -d "$dstdir"
dstdir_status=$?
fi
fi
- case $dstdir in
- */) dstdirslash=$dstdir;;
- *) dstdirslash=$dstdir/;;
- esac
-
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- # Note that $RANDOM variable is not portable (e.g. dash); Use it
- # here however when possible just to lower collision chance.
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-
- trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- # Because "mkdir -p" follows existing symlinks and we likely work
- # directly in world-writeable /tmp, make sure that the '$tmpdir'
- # directory is successfully created first before we actually test
- # 'mkdir -p' feature.
- if (umask $mkdir_umask &&
- $mkdirprog $mkdir_mode "$tmpdir" &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- test_tmpdir="$tmpdir/a"
- ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
- fi
- trap '' 0;;
- esac;;
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
esac
if
$posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
@@ -387,51 +378,60 @@ do
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) prefix='/';;
- [-=\(\)!]*) prefix='./';;
- *) prefix='';;
+ /*) prefix=/ ;;
+ -*) prefix=./ ;;
+ *) prefix= ;;
+ esac
+
+ case $posix_glob in
+ '')
+ if (set -f) 2>/dev/null; then
+ posix_glob=true
+ else
+ posix_glob=false
+ fi ;;
esac
oIFS=$IFS
IFS=/
- set -f
+ $posix_glob && set -f
set fnord $dstdir
shift
- set +f
+ $posix_glob && set +f
IFS=$oIFS
prefixes=
for d
do
- test X"$d" = X && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
+ test -z "$d" && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
done
if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
fi
fi
fi
@@ -444,8 +444,8 @@ do
else
# Make a couple of temp file names in the proper directory.
- dsttmp=${dstdirslash}_inst.$$_
- rmtmp=${dstdirslash}_rm.$$_
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
@@ -459,60 +459,49 @@ do
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
- { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
- { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
- # If -C, don't bother to copy if it wouldn't change the file.
- if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
- set -f &&
- set X $old && old=:$2:$4:$5:$6 &&
- set X $new && new=:$2:$4:$5:$6 &&
- set +f &&
- test "$old" = "$new" &&
- $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
- then
- rm -f "$dsttmp"
- else
- # Rename the file to the real destination.
- $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
- {
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- fi || exit 1
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # Now rename the file to the real destination.
+ { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
+ || {
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ if test -f "$dst"; then
+ $doit $rmcmd -f "$dst" 2>/dev/null \
+ || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
+ && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
+ || {
+ echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ else
+ :
+ fi
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ } || exit 1
trap '' 0
fi
done
# Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
+# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
+# time-stamp-end: "$"
# End:
diff --git a/missing b/missing
index 625aeb1..1c8ff70 100755
--- a/missing
+++ b/missing
@@ -1,10 +1,11 @@
#! /bin/sh
-# Common wrapper for a few potentially missing GNU programs.
+# Common stub for a few missing GNU programs while installing.
-scriptversion=2018-03-07.03; # UTC
+scriptversion=2006-05-10.23
-# Copyright (C) 1996-2018 Free Software Foundation, Inc.
-# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -17,7 +18,9 @@ scriptversion=2018-03-07.03; # UTC
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <https://www.gnu.org/licenses/>.
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -25,40 +28,66 @@ scriptversion=2018-03-07.03; # UTC
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
- echo 1>&2 "Try '$0 --help' for more information"
+ echo 1>&2 "Try \`$0 --help' for more information"
exit 1
fi
-case $1 in
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
- --is-lightweight)
- # Used by our autoconf macros to check whether the available missing
- # script is modern enough.
- exit 0
- ;;
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
- --run)
- # Back-compat with the calling convention used by older automake.
- shift
- ;;
+msg="missing on your system"
+
+case $1 in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
-Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
-to PROGRAM being missing or too old.
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
- aclocal autoconf autoheader autom4te automake makeinfo
- bison yacc flex lex help2man
-
-Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
-'g' are ignored when checking the name.
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
Send bug reports to <bug-automake@gnu.org>."
exit $?
@@ -70,146 +99,269 @@ Send bug reports to <bug-automake@gnu.org>."
;;
-*)
- echo 1>&2 "$0: unknown '$1' option"
- echo 1>&2 "Try '$0 --help' for more information"
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
exit 1
;;
esac
-# Run the given program, remember its exit status.
-"$@"; st=$?
-
-# If it succeeded, we are done.
-test $st -eq 0 && exit 0
-
-# Also exit now if we it failed (or wasn't found), and '--version' was
-# passed; such an option is passed most likely to detect whether the
-# program is present and works.
-case $2 in --version|--help) exit $st;; esac
-
-# Exit code 63 means version mismatch. This often happens when the user
-# tries to use an ancient version of a tool on a file that requires a
-# minimum version.
-if test $st -eq 63; then
- msg="probably too old"
-elif test $st -eq 127; then
- # Program was missing.
- msg="missing on your system"
-else
- # Program was found and executed, but failed. Give up.
- exit $st
-fi
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case $1 in
+ lex|yacc)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $1 in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
+ makeinfo)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ tar)
+ shift
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case $firstarg in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case $firstarg in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
-perl_URL=https://www.perl.org/
-flex_URL=https://github.com/westes/flex
-gnu_software_URL=https://www.gnu.org/software
-
-program_details ()
-{
- case $1 in
- aclocal|automake)
- echo "The '$1' program is part of the GNU Automake package:"
- echo "<$gnu_software_URL/automake>"
- echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
- echo "<$gnu_software_URL/autoconf>"
- echo "<$gnu_software_URL/m4/>"
- echo "<$perl_URL>"
- ;;
- autoconf|autom4te|autoheader)
- echo "The '$1' program is part of the GNU Autoconf package:"
- echo "<$gnu_software_URL/autoconf/>"
- echo "It also requires GNU m4 and Perl in order to run:"
- echo "<$gnu_software_URL/m4/>"
- echo "<$perl_URL>"
- ;;
- esac
-}
-
-give_advice ()
-{
- # Normalize program name to check for.
- normalized_program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
- printf '%s\n' "'$1' is $msg."
-
- configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
- case $normalized_program in
- autoconf*)
- echo "You should only need it if you modified 'configure.ac',"
- echo "or m4 files included by it."
- program_details 'autoconf'
- ;;
- autoheader*)
- echo "You should only need it if you modified 'acconfig.h' or"
- echo "$configure_deps."
- program_details 'autoheader'
- ;;
- automake*)
- echo "You should only need it if you modified 'Makefile.am' or"
- echo "$configure_deps."
- program_details 'automake'
- ;;
- aclocal*)
- echo "You should only need it if you modified 'acinclude.m4' or"
- echo "$configure_deps."
- program_details 'aclocal'
- ;;
- autom4te*)
- echo "You might have modified some maintainer files that require"
- echo "the 'autom4te' program to be rebuilt."
- program_details 'autom4te'
- ;;
- bison*|yacc*)
- echo "You should only need it if you modified a '.y' file."
- echo "You may want to install the GNU Bison package:"
- echo "<$gnu_software_URL/bison/>"
- ;;
- lex*|flex*)
- echo "You should only need it if you modified a '.l' file."
- echo "You may want to install the Fast Lexical Analyzer package:"
- echo "<$flex_URL>"
- ;;
- help2man*)
- echo "You should only need it if you modified a dependency" \
- "of a man page."
- echo "You may want to install the GNU Help2man package:"
- echo "<$gnu_software_URL/help2man/>"
- ;;
- makeinfo*)
- echo "You should only need it if you modified a '.texi' file, or"
- echo "any other file indirectly affecting the aspect of the manual."
- echo "You might want to install the Texinfo package:"
- echo "<$gnu_software_URL/texinfo/>"
- echo "The spurious makeinfo call might also be the consequence of"
- echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
- echo "want to install GNU make:"
- echo "<$gnu_software_URL/make/>"
- ;;
- *)
- echo "You might have modified some files without having the proper"
- echo "tools for further handling them. Check the 'README' file, it"
- echo "often tells you about the needed prerequisites for installing"
- echo "this package. You may also peek at any GNU archive site, in"
- echo "case some other package contains this missing '$1' program."
- ;;
- esac
-}
-
-give_advice "$1" | sed -e '1s/^/WARNING: /' \
- -e '2,$s/^/ /' >&2
-
-# Propagate the correct exit status (expected to be 127 for a program
-# not found, 63 for a program that failed due to version mismatch).
-exit $st
+exit 0
# Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
+# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
+# time-stamp-end: "$"
# End:
diff --git a/spcrc/Makefile.in b/spcrc/Makefile.in
index 74ec251..9298f32 100644
--- a/spcrc/Makefile.in
+++ b/spcrc/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -161,7 +161,7 @@ am__recursive_targets = \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
- distdir distdir-am
+ distdir
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
@@ -332,8 +332,8 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -465,10 +465,7 @@ cscopelist-am: $(am__tagged_files)
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-distdir: $(BUILT_SOURCES)
- $(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
+distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
diff --git a/src/0-README b/src/0-README
new file mode 100644
index 0000000..a8a09c5
--- /dev/null
+++ b/src/0-README
@@ -0,0 +1,12 @@
+
+Command line option: -e color,RE # r,color,n,(RE)
+
+Command line option: -E t,color,attributes,string/RE
+
+where:
+
+ t: r:RE R:RE s:STR c:CHAR t:MMDDHHMMSS T:YYMMDDHHMM
+
+ color: r:red b:blu g:grn y:yel w:whi c:cya m:mag k:blk
+
+ attributes: n:normal r:reverse u:underline b:bold k:blink
diff --git a/src/Makefile.in b/src/Makefile.in
index edfc75d..8261d83 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -120,8 +120,7 @@ am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__maybe_remake_depfiles = depfiles
-am__depfiles_remade = ./$(DEPDIR)/spc.Po
+am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@@ -283,8 +282,8 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -348,13 +347,7 @@ mostlyclean-compile:
distclean-compile:
-rm -f *.tab.c
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/spc.Po@am__quote@ # am--include-marker
-
-$(am__depfiles_remade):
- @$(MKDIR_P) $(@D)
- @echo '# dummy' >$@-t && $(am__mv) $@-t $@
-
-am--depfiles: $(am__depfiles_remade)
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/spc.Po@am__quote@
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -422,10 +415,7 @@ cscopelist-am: $(am__tagged_files)
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-distdir: $(BUILT_SOURCES)
- $(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
+distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -497,7 +487,7 @@ clean: clean-am
clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
distclean: distclean-am
- -rm -f ./$(DEPDIR)/spc.Po
+ -rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
@@ -543,7 +533,7 @@ install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
- -rm -f ./$(DEPDIR)/spc.Po
+ -rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
@@ -563,7 +553,7 @@ uninstall-am: uninstall-binPROGRAMS
.MAKE: install-am install-strip
-.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \
clean-binPROGRAMS clean-generic cscopelist-am ctags ctags-am \
distclean distclean-compile distclean-generic distclean-tags \
distdir dvi dvi-am html html-am info info-am install \
diff --git a/src/spc.c b/src/spc.c
index 8605acc..0408f3d 100644
--- a/src/spc.c
+++ b/src/spc.c
@@ -1,6 +1,6 @@
-/*
+/*
SuperCat - The Super Cat Colorizer
- Copyright (C) 2007-2020 - Mark P. Anderson, Thomas G. Anderson
+ Copyright (C) 2007-2022 - Thomas G Anderson
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -114,9 +114,9 @@ help ()
void
version ()
{
- printf ("spc (SuperCat Colorizer) Version %s January 1, 2020\n", VERSION);
+ printf ("spc (SuperCat Colorizer) Version %s January 1, 2022\n", VERSION);
puts ("");
- puts ("Copyright (C) 2007-2020 - Mark P. Anderson, Thomas G. Anderson");
+ puts ("Copyright (C) 2007-2022 - Thomas G Anderson");
puts ("");
puts ("This is free software, see the source for copying conditions.");
puts ("There is NO warranty not even for MERCHANTABILITY or FITNESS");
@@ -212,7 +212,7 @@ option_E (char *str, char *cmd)
if (!Fp) Fp = tmpfile ();
if ( (strlen (str) < 11) || (str [3] != ',') || (str [5] != ',') || (str [7] != ',' || (str [9] != ',') ) ) {
- printf ("%s invalid option string, format is \"color,att,num,typ,string|(RE)\"\n", cmd);
+ printf ("%s invalid option string, format is \"color,attribute,count,type,string|(RE)\"\n", cmd);
exit (-1);
}
str [3] = 0;
@@ -229,7 +229,7 @@ option_E (char *str, char *cmd)
exit (-1);
}
if (number_lookup (str [6]) == -1) {
- printf ("%s invalid option string number (%c), use: 0-9\n", cmd, str [6]);
+ printf ("%s invalid option string count (%c), use: 0-9\n", cmd, str [6]);
exit (-1);
}
if (patype_lookup (str [8]) == -1) {
@@ -291,7 +291,7 @@ options (int ac, char **av)
case 'n': opt_line_number = 1; break;
case 'r': opt_reverse = 1; break;
case 'R': opt_nohomerc = 1; break;
- case 'S': sysdir (); break;
+ case 'S': sysdir (); break;
case 'v': version (); break;
case 'w': opt_webpage = 1; break;
@@ -414,7 +414,7 @@ options (int ac, char **av)
*p++ = 0;
else
p = av [++i];
-
+
if (!p || !*p) err_quit ("--config-dir missing parameter");
opt_directory = malloc (strlen (p)+1);
@@ -455,7 +455,7 @@ options (int ac, char **av)
*p++ = 0;
else
p = av [++i];
-
+
if (!p || !*p) err_quit ("--type missing parameter");
opt_type = malloc (strlen (p)+1);
@@ -715,7 +715,7 @@ attrib_lookup_or_exit (char chr)
err_quit ("unknown attribute %c at line number %d", chr, inp_lineno);
return (att);
-}
+}
int
patype_lookup (char chr)
@@ -740,7 +740,7 @@ patype_lookup_or_exit (char chr)
err_quit ("unknown pattern type %c at line number %d", chr, inp_lineno);
return (typ);
-}
+}
int
colour_str (spc_t *spc, char *string, char *aryidx, int n)
@@ -838,8 +838,8 @@ colour_rex (spc_t *spc, char *string, char *aryidx, int n)
* characters so the string stays the same size.
*
* UNIXTM1 : t : MMDDHHMMSS
- * UNIXTM2 : T : YYMMDDHHMM
- * UNIXTM3 : u : HH:MM:SS
+ * UNIXTM2 : T : YYMMDDHHMM
+ * UNIXTM3 : u : HH:MM:SS
* UNIXTM4 : U : YYYY:MM:DD
*/
if (spc->patype == PATYPE_UNIXTM1) {
@@ -1117,6 +1117,9 @@ create_rex (FILE *fp)
* the strings are just stored.
*/
while (fgets (buffer, sizeof (buffer), fp)) {
+ if (Spn >= NREGEX)
+ err_quit ("too many config file entries, %d max", NREGEX);
+
n = strlen (buffer);
if (n == BUFFER)
err_quit ("line too long: %s", buffer);
@@ -1141,7 +1144,7 @@ create_rex (FILE *fp)
spc->attrib = attrib_lookup_or_exit ( buffer [COLUMN_ATTRIB]);
spc->number = number_lookup_or_exit ( buffer [COLUMN_NUMBER]);
spc->patype = patype_lookup_or_exit ( buffer [COLUMN_PATYPE]);
-
+
spc->htmrgb = malloc (strlen (&buffer [COLUMN_HTMRGB]) + 1);
strcpy (spc->htmrgb,&buffer [COLUMN_HTMRGB]);
spc->htmlen = strlen (spc->htmrgb);
diff --git a/src/spc.h b/src/spc.h
index 36ef48a..5829c92 100644
--- a/src/spc.h
+++ b/src/spc.h
@@ -1,6 +1,6 @@
/*
SuperCat - The Super Cat Colorizer
- Copyright (C) 2007-2020 - Mark P. Anderson, Thomas G. Anderson
+ Copyright (C) 2007-2022 - Thomas G Anderson
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -62,7 +62,7 @@
#endif
#define NMATCH 16
-#define NREGEX 16
+#define NREGEX 256
#define BUFFER 4096
#define PATYPE_CHARS 'c'
diff --git a/test/data b/test/data
new file mode 100644
index 0000000..d76fc19
--- /dev/null
+++ b/test/data
@@ -0,0 +1,4 @@
+1534567890
+1534567891
+153456789123
+153456789
diff --git a/test/spcrc1 b/test/spcrc1
new file mode 100644
index 0000000..a83b668
--- /dev/null
+++ b/test/spcrc1
@@ -0,0 +1,5 @@
+#2345678901234567890123456789012345678901234567890123456789
+# HTML COLOR COL A N T STRING or REGULAR EXPRESSION
+#################### ### # # # ############################
+#
+Magenta mag t ^([0-9]{10})
diff --git a/test/spcrc2 b/test/spcrc2
new file mode 100644
index 0000000..e8bb9da
--- /dev/null
+++ b/test/spcrc2
@@ -0,0 +1,5 @@
+#2345678901234567890123456789012345678901234567890123456789
+# HTML COLOR COL A N T STRING or REGULAR EXPRESSION
+#################### ### # # # ############################
+#
+Green grn T ^([0-9]{10})
diff --git a/test/spcrc3 b/test/spcrc3
new file mode 100644
index 0000000..b475ab7
--- /dev/null
+++ b/test/spcrc3
@@ -0,0 +1,5 @@
+#2345678901234567890123456789012345678901234567890123456789
+# HTML COLOR COL A N T STRING or REGULAR EXPRESSION
+#################### ### # # # ############################
+#
+Red red u ^([0-9]{10})
diff --git a/test/spcrc4 b/test/spcrc4
new file mode 100644
index 0000000..2f5016f
--- /dev/null
+++ b/test/spcrc4
@@ -0,0 +1,5 @@
+#2345678901234567890123456789012345678901234567890123456789
+# HTML COLOR COL A N T STRING or REGULAR EXPRESSION
+#################### ### # # # ############################
+#
+Yellow yel U ^([0-9]{10})
Debdiff
[The following lists of changes regard files as different if they have different names, permissions or owners.]
Files in second set of .debs but not in first
-rw-r--r-- root/root /usr/lib/debug/.build-id/fb/5dc9d830c7c0de4ef9b14f3e0b8acf69a6a653.debug
Files in first set of .debs but not in second
-rw-r--r-- root/root /usr/lib/debug/.build-id/43/6ab865b788873e329f3293452368487b1011a6.debug
No differences were encountered between the control files of package supercat
Control files of package supercat-dbgsym: lines which differ (wdiff format)
Build-Ids: 436ab865b788873e329f3293452368487b1011a6 fb5dc9d830c7c0de4ef9b14f3e0b8acf69a6a653