New Upstream Snapshot - quorum

Ready changes

Summary

Merged new upstream version: 1.1.2 (was: 1.1.1).

Diff

diff --git a/.gitignore b/.gitignore
deleted file mode 100644
index 93f4304..0000000
--- a/.gitignore
+++ /dev/null
@@ -1,9 +0,0 @@
-Makefile.in
-aclocal.m4
-autom4te.cache
-config.h.in
-configure
-depcomp
-install-sh
-missing
-config.h.in~
diff --git a/.gitmod b/.gitmod
deleted file mode 100644
index 6563189..0000000
--- a/.gitmod
+++ /dev/null
@@ -1 +0,0 @@
-develop
diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000..717f4de
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,1632 @@
+# Makefile.in generated by automake 1.16.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = quorum_error_correct_reads$(EXEEXT) \
+	quorum_create_database$(EXEEXT) merge_mate_pairs$(EXEEXT) \
+	split_mate_pairs$(EXEEXT)
+TESTS = all_tests$(EXEEXT)
+check_PROGRAMS = all_tests$(EXEEXT) query_mer_database$(EXEEXT) \
+	histo_mer_database$(EXEEXT)
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+	$(am__configure_deps) $(dist_data_DATA) $(noinst_HEADERS) \
+	$(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
+	"$(DESTDIR)$(datadir)"
+PROGRAMS = $(bin_PROGRAMS)
+libgtest_la_LIBADD =
+am__dirstamp = $(am__leading_dot)dirstamp
+am_libgtest_la_OBJECTS =  \
+	unit_tests/gtest/src/libgtest_la-gtest-all.lo
+libgtest_la_OBJECTS = $(am_libgtest_la_OBJECTS)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+libgtest_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(libgtest_la_CXXFLAGS) \
+	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+libgtest_main_la_DEPENDENCIES = libgtest.la
+am_libgtest_main_la_OBJECTS =  \
+	unit_tests/gtest/src/libgtest_main_la-gtest_main.lo
+libgtest_main_la_OBJECTS = $(am_libgtest_main_la_OBJECTS)
+libgtest_main_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CXXLD) \
+	$(libgtest_main_la_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+am_all_tests_OBJECTS =  \
+	unit_tests/all_tests-test_mer_database.$(OBJEXT)
+all_tests_OBJECTS = $(am_all_tests_OBJECTS)
+am__DEPENDENCIES_1 =
+am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1)
+all_tests_DEPENDENCIES = libgtest_main.la $(am__DEPENDENCIES_2)
+all_tests_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(all_tests_CXXFLAGS) \
+	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+am_histo_mer_database_OBJECTS = src/histo_mer_database.$(OBJEXT)
+histo_mer_database_OBJECTS = $(am_histo_mer_database_OBJECTS)
+histo_mer_database_LDADD = $(LDADD)
+histo_mer_database_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am_merge_mate_pairs_OBJECTS = src/merge_mate_pairs.$(OBJEXT)
+merge_mate_pairs_OBJECTS = $(am_merge_mate_pairs_OBJECTS)
+merge_mate_pairs_LDADD = $(LDADD)
+merge_mate_pairs_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am_query_mer_database_OBJECTS = src/query_mer_database.$(OBJEXT)
+query_mer_database_OBJECTS = $(am_query_mer_database_OBJECTS)
+query_mer_database_LDADD = $(LDADD)
+query_mer_database_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am_quorum_create_database_OBJECTS = src/create_database.$(OBJEXT)
+quorum_create_database_OBJECTS = $(am_quorum_create_database_OBJECTS)
+quorum_create_database_LDADD = $(LDADD)
+quorum_create_database_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am_quorum_error_correct_reads_OBJECTS =  \
+	src/error_correct_reads.$(OBJEXT) src/err_log.$(OBJEXT)
+quorum_error_correct_reads_OBJECTS =  \
+	$(am_quorum_error_correct_reads_OBJECTS)
+quorum_error_correct_reads_LDADD = $(LDADD)
+quorum_error_correct_reads_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am_split_mate_pairs_OBJECTS = src/split_mate_pairs.$(OBJEXT)
+split_mate_pairs_OBJECTS = $(am_split_mate_pairs_OBJECTS)
+split_mate_pairs_LDADD = $(LDADD)
+split_mate_pairs_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+SCRIPTS = $(bin_SCRIPTS) $(noinst_SCRIPTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = src/$(DEPDIR)/create_database.Po \
+	src/$(DEPDIR)/err_log.Po src/$(DEPDIR)/error_correct_reads.Po \
+	src/$(DEPDIR)/histo_mer_database.Po \
+	src/$(DEPDIR)/merge_mate_pairs.Po \
+	src/$(DEPDIR)/query_mer_database.Po \
+	src/$(DEPDIR)/split_mate_pairs.Po \
+	unit_tests/$(DEPDIR)/all_tests-test_mer_database.Po \
+	unit_tests/gtest/src/$(DEPDIR)/libgtest_la-gtest-all.Plo \
+	unit_tests/gtest/src/$(DEPDIR)/libgtest_main_la-gtest_main.Plo
+am__mv = mv -f
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CXXFLAGS) $(CXXFLAGS)
+AM_V_CXX = $(am__v_CXX_@AM_V@)
+am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
+am__v_CXX_0 = @echo "  CXX     " $@;
+am__v_CXX_1 = 
+CXXLD = $(CXX)
+CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
+am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
+am__v_CXXLD_0 = @echo "  CXXLD   " $@;
+am__v_CXXLD_1 = 
+SOURCES = $(libgtest_la_SOURCES) $(libgtest_main_la_SOURCES) \
+	$(all_tests_SOURCES) $(histo_mer_database_SOURCES) \
+	$(merge_mate_pairs_SOURCES) $(query_mer_database_SOURCES) \
+	$(quorum_create_database_SOURCES) \
+	$(quorum_error_correct_reads_SOURCES) \
+	$(split_mate_pairs_SOURCES)
+DIST_SOURCES = $(libgtest_la_SOURCES) $(libgtest_main_la_SOURCES) \
+	$(all_tests_SOURCES) $(histo_mer_database_SOURCES) \
+	$(merge_mate_pairs_SOURCES) $(query_mer_database_SOURCES) \
+	$(quorum_create_database_SOURCES) \
+	$(quorum_error_correct_reads_SOURCES) \
+	$(split_mate_pairs_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+DATA = $(dist_data_DATA)
+HEADERS = $(noinst_HEADERS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
+	config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+AM_RECURSIVE_TARGETS = cscope check recheck
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+AM_TESTSUITE_SUMMARY_HEADER = ' for $(PACKAGE_STRING)'
+RECHECK_LOGS = $(TEST_LOGS)
+TEST_SUITE_LOG = test-suite.log
+TEST_EXTENSIONS = @EXEEXT@ .test
+LOG_DRIVER = $(SHELL) $(top_srcdir)/build-aux/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.test.log=.log)
+TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/build-aux/test-driver
+TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
+	$(TEST_LOG_FLAGS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+	$(srcdir)/gtest.mk $(top_srcdir)/build-aux/compile \
+	$(top_srcdir)/build-aux/config.guess \
+	$(top_srcdir)/build-aux/config.sub \
+	$(top_srcdir)/build-aux/depcomp \
+	$(top_srcdir)/build-aux/install-sh \
+	$(top_srcdir)/build-aux/ltmain.sh \
+	$(top_srcdir)/build-aux/missing \
+	$(top_srcdir)/build-aux/test-driver AUTHORS COPYING ChangeLog \
+	INSTALL NEWS README build-aux/compile build-aux/config.guess \
+	build-aux/config.sub build-aux/depcomp build-aux/install-sh \
+	build-aux/ltmain.sh build-aux/missing
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
+# Exists only to be overridden by the user if desired.
+AM_DISTCHECK_DVI_TARGET = dvi
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+ETAGS = @ETAGS@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FILECMD = @FILECMD@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+JELLYFISH = @JELLYFISH@
+JELLYFISH2_0_CFLAGS = @JELLYFISH2_0_CFLAGS@
+JELLYFISH2_0_LIBS = @JELLYFISH2_0_LIBS@
+JELLYFISH_VERSION = @JELLYFISH_VERSION@
+JF_LIB_PATH = @JF_LIB_PATH@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+RANLIB = @RANLIB@
+RELATIVE_JF_PATH = @RELATIVE_JF_PATH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STATIC_FLAGS = @STATIC_FLAGS@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YAGGO = @YAGGO@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ACLOCAL_AMFLAGS = -I m4
+AM_CPPFLAGS = -I$(srcdir)/include -I$(srcdir) $(JELLYFISH2_0_CFLAGS)
+AM_CXXFLAGS = -Wall -g -O2 -std=c++0x
+AM_LDFLAGS = $(STATIC_FLAGS)
+LDADD = $(JELLYFISH2_0_LIBS)
+
+# Yaggo automatic rules with silencing
+V_YAGGO = $(V_YAGGO_$(V))
+V_YAGGO_ = $(V_YAGGO_$(AM_DEFAULT_VERBOSITY))
+V_YAGGO_0 = @echo "  YAGGO " $@;
+YAGGO_SOURCES = src/error_correct_reads_cmdline.hpp	\
+                src/create_database_cmdline.hpp		\
+                src/merge_mate_pairs_cmdline.hpp	\
+                src/split_mate_pairs_cmdline.hpp
+
+BUILT_SOURCES = $(YAGGO_SOURCES)
+noinst_HEADERS = $(YAGGO_SOURCES) src/error_correct_reads.hpp \
+	src/error_correct_reads.hpp src/verbose_log.hpp src/kmer.hpp \
+	src/mer_database.hpp src/err_log.hpp include/gzip_stream.hpp \
+	include/misc.hpp include/jflib/locks_pthread.hpp \
+	include/jflib/pool.hpp include/jflib/multiplexed_io.hpp \
+	unit_tests/test_misc.hpp
+CLEANFILES = $(libs_scripts) $(perl_scripts)
+EXTRA_DIST = $(patsubst %,src/%.in,$(perl_scripts)) $(GTEST_SRC)
+quorum_error_correct_reads_SOURCES = src/error_correct_reads.cc	\
+                                     src/err_log.cc
+
+quorum_create_database_SOURCES = src/create_database.cc
+merge_mate_pairs_SOURCES = src/merge_mate_pairs.cc
+split_mate_pairs_SOURCES = src/split_mate_pairs.cc
+
+###############################
+# Adapter database generation #
+###############################
+dist_data_DATA = data/adapter.jf
+DISTCLEANFILES = data/adapter.jf
+SUFFIXES = .jf .fa
+perl_scripts = quorum
+libs_scripts = $(patsubst %,.libs/%,$(perl_scripts))
+bin_SCRIPTS = $(libs_scripts)
+noinst_SCRIPTS = $(perl_scripts)
+@RELATIVE_PATHS_FALSE@quorum_bindir = $(bindir)
+@RELATIVE_PATHS_TRUE@quorum_bindir = $$dir
+@HAVE_RELATIVE_JF_PATH_FALSE@quorum_jellyfish = $(JELLYFISH)
+@HAVE_RELATIVE_JF_PATH_TRUE@quorum_jellyfish = $$dir/$(RELATIVE_JF_PATH)
+@HAVE_RELATIVE_JF_PATH_FALSE@local_quorum_jellyfish = $(quorum_jellyfish)
+@HAVE_RELATIVE_JF_PATH_TRUE@local_quorum_jellyfish = $(shell realpath "$(bindir)/$(RELATIVE_JF_PATH)")
+inst_subst = sed -e 's|[@]JELLYFISH[@]|$(quorum_jellyfish)|g' \
+                 -e 's|[@]bindir[@]|$(quorum_bindir)|g' \
+	         -e 's|[@]JF_LIB_PATH[@]|$(JF_LIB_PATH)|g' \
+	         -e 's|[@]PACKAGE_VERSION[@]|$(PACKAGE_VERSION)|g' \
+	         -e 's|[@]JELLYFISH_VERSION[@]|$(JELLYFISH_VERSION)|g'
+
+local_subst = sed -e 's|[@]JELLYFISH[@]|$(quorum_jellyfish)|g' \
+	          -e 's|[@]bindir[@]|$(abs_builddir)|g' \
+	          -e 's|[@]JF_LIB_PATH[@]|$(JF_LIB_PATH)|g' \
+	          -e 's|[@]PACKAGE_VERSION[@]|$(PACKAGE_VERSION)|g' \
+	          -e 's|[@]JELLYFISH_VERSION[@]|$(JELLYFISH_VERSION)|g'
+
+all_tests_SOURCES = unit_tests/test_mer_database.cc
+all_tests_CXXFLAGS = $(AM_CXXFLAGS) -I$(srcdir)/unit_tests/gtest/include -I$(srcdir)/unit_tests
+all_tests_LDADD = libgtest_main.la $(LDADD)
+query_mer_database_SOURCES = src/query_mer_database.cc
+histo_mer_database_SOURCES = src/histo_mer_database.cc
+
+##############################
+# Gtest build.
+##############################
+# Build rules for libraries.
+check_LTLIBRARIES = libgtest.la libgtest_main.la
+libgtest_la_SOURCES = unit_tests/gtest/src/gtest-all.cc
+libgtest_main_la_SOURCES = unit_tests/gtest/src/gtest_main.cc
+libgtest_main_la_LIBADD = libgtest.la
+libgtest_la_CXXFLAGS = -I$(srcdir)/unit_tests
+libgtest_main_la_CXXFLAGS = -I$(srcdir)/unit_tests
+GTEST_SRC = unit_tests/gtest/src/gtest-all.cc	\
+	    unit_tests/gtest/src/gtest_main.cc	\
+	    unit_tests/gtest/gtest.h
+
+all: $(BUILT_SOURCES) config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .jf .fa .cc .hpp .lo .log .o .obj .test .test$(EXEEXT) .trs .yaggo
+am--refresh: Makefile
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(srcdir)/gtest.mk $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
+	esac;
+$(srcdir)/gtest.mk $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in:  $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+clean-checkLTLIBRARIES:
+	-test -z "$(check_LTLIBRARIES)" || rm -f $(check_LTLIBRARIES)
+	@list='$(check_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+unit_tests/gtest/src/$(am__dirstamp):
+	@$(MKDIR_P) unit_tests/gtest/src
+	@: > unit_tests/gtest/src/$(am__dirstamp)
+unit_tests/gtest/src/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) unit_tests/gtest/src/$(DEPDIR)
+	@: > unit_tests/gtest/src/$(DEPDIR)/$(am__dirstamp)
+unit_tests/gtest/src/libgtest_la-gtest-all.lo:  \
+	unit_tests/gtest/src/$(am__dirstamp) \
+	unit_tests/gtest/src/$(DEPDIR)/$(am__dirstamp)
+
+libgtest.la: $(libgtest_la_OBJECTS) $(libgtest_la_DEPENDENCIES) $(EXTRA_libgtest_la_DEPENDENCIES) 
+	$(AM_V_CXXLD)$(libgtest_la_LINK)  $(libgtest_la_OBJECTS) $(libgtest_la_LIBADD) $(LIBS)
+unit_tests/gtest/src/libgtest_main_la-gtest_main.lo:  \
+	unit_tests/gtest/src/$(am__dirstamp) \
+	unit_tests/gtest/src/$(DEPDIR)/$(am__dirstamp)
+
+libgtest_main.la: $(libgtest_main_la_OBJECTS) $(libgtest_main_la_DEPENDENCIES) $(EXTRA_libgtest_main_la_DEPENDENCIES) 
+	$(AM_V_CXXLD)$(libgtest_main_la_LINK)  $(libgtest_main_la_OBJECTS) $(libgtest_main_la_LIBADD) $(LIBS)
+unit_tests/$(am__dirstamp):
+	@$(MKDIR_P) unit_tests
+	@: > unit_tests/$(am__dirstamp)
+unit_tests/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) unit_tests/$(DEPDIR)
+	@: > unit_tests/$(DEPDIR)/$(am__dirstamp)
+unit_tests/all_tests-test_mer_database.$(OBJEXT):  \
+	unit_tests/$(am__dirstamp) \
+	unit_tests/$(DEPDIR)/$(am__dirstamp)
+
+all_tests$(EXEEXT): $(all_tests_OBJECTS) $(all_tests_DEPENDENCIES) $(EXTRA_all_tests_DEPENDENCIES) 
+	@rm -f all_tests$(EXEEXT)
+	$(AM_V_CXXLD)$(all_tests_LINK) $(all_tests_OBJECTS) $(all_tests_LDADD) $(LIBS)
+src/$(am__dirstamp):
+	@$(MKDIR_P) src
+	@: > src/$(am__dirstamp)
+src/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) src/$(DEPDIR)
+	@: > src/$(DEPDIR)/$(am__dirstamp)
+src/histo_mer_database.$(OBJEXT): src/$(am__dirstamp) \
+	src/$(DEPDIR)/$(am__dirstamp)
+
+histo_mer_database$(EXEEXT): $(histo_mer_database_OBJECTS) $(histo_mer_database_DEPENDENCIES) $(EXTRA_histo_mer_database_DEPENDENCIES) 
+	@rm -f histo_mer_database$(EXEEXT)
+	$(AM_V_CXXLD)$(CXXLINK) $(histo_mer_database_OBJECTS) $(histo_mer_database_LDADD) $(LIBS)
+src/merge_mate_pairs.$(OBJEXT): src/$(am__dirstamp) \
+	src/$(DEPDIR)/$(am__dirstamp)
+
+merge_mate_pairs$(EXEEXT): $(merge_mate_pairs_OBJECTS) $(merge_mate_pairs_DEPENDENCIES) $(EXTRA_merge_mate_pairs_DEPENDENCIES) 
+	@rm -f merge_mate_pairs$(EXEEXT)
+	$(AM_V_CXXLD)$(CXXLINK) $(merge_mate_pairs_OBJECTS) $(merge_mate_pairs_LDADD) $(LIBS)
+src/query_mer_database.$(OBJEXT): src/$(am__dirstamp) \
+	src/$(DEPDIR)/$(am__dirstamp)
+
+query_mer_database$(EXEEXT): $(query_mer_database_OBJECTS) $(query_mer_database_DEPENDENCIES) $(EXTRA_query_mer_database_DEPENDENCIES) 
+	@rm -f query_mer_database$(EXEEXT)
+	$(AM_V_CXXLD)$(CXXLINK) $(query_mer_database_OBJECTS) $(query_mer_database_LDADD) $(LIBS)
+src/create_database.$(OBJEXT): src/$(am__dirstamp) \
+	src/$(DEPDIR)/$(am__dirstamp)
+
+quorum_create_database$(EXEEXT): $(quorum_create_database_OBJECTS) $(quorum_create_database_DEPENDENCIES) $(EXTRA_quorum_create_database_DEPENDENCIES) 
+	@rm -f quorum_create_database$(EXEEXT)
+	$(AM_V_CXXLD)$(CXXLINK) $(quorum_create_database_OBJECTS) $(quorum_create_database_LDADD) $(LIBS)
+src/error_correct_reads.$(OBJEXT): src/$(am__dirstamp) \
+	src/$(DEPDIR)/$(am__dirstamp)
+src/err_log.$(OBJEXT): src/$(am__dirstamp) \
+	src/$(DEPDIR)/$(am__dirstamp)
+
+quorum_error_correct_reads$(EXEEXT): $(quorum_error_correct_reads_OBJECTS) $(quorum_error_correct_reads_DEPENDENCIES) $(EXTRA_quorum_error_correct_reads_DEPENDENCIES) 
+	@rm -f quorum_error_correct_reads$(EXEEXT)
+	$(AM_V_CXXLD)$(CXXLINK) $(quorum_error_correct_reads_OBJECTS) $(quorum_error_correct_reads_LDADD) $(LIBS)
+src/split_mate_pairs.$(OBJEXT): src/$(am__dirstamp) \
+	src/$(DEPDIR)/$(am__dirstamp)
+
+split_mate_pairs$(EXEEXT): $(split_mate_pairs_OBJECTS) $(split_mate_pairs_DEPENDENCIES) $(EXTRA_split_mate_pairs_DEPENDENCIES) 
+	@rm -f split_mate_pairs$(EXEEXT)
+	$(AM_V_CXXLD)$(CXXLINK) $(split_mate_pairs_OBJECTS) $(split_mate_pairs_LDADD) $(LIBS)
+install-binSCRIPTS: $(bin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	     } \
+	; done
+
+uninstall-binSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+	-rm -f src/*.$(OBJEXT)
+	-rm -f unit_tests/*.$(OBJEXT)
+	-rm -f unit_tests/gtest/src/*.$(OBJEXT)
+	-rm -f unit_tests/gtest/src/*.lo
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/create_database.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/err_log.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/error_correct_reads.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/histo_mer_database.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/merge_mate_pairs.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/query_mer_database.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/split_mate_pairs.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@unit_tests/$(DEPDIR)/all_tests-test_mer_database.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@unit_tests/gtest/src/$(DEPDIR)/libgtest_la-gtest-all.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@unit_tests/gtest/src/$(DEPDIR)/libgtest_main_la-gtest_main.Plo@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.cc.o:
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCXX_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<
+
+.cc.obj:
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
+@am__fastdepCXX_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.cc.lo:
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
+@am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCXX_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Plo
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $<
+
+unit_tests/gtest/src/libgtest_la-gtest-all.lo: unit_tests/gtest/src/gtest-all.cc
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgtest_la_CXXFLAGS) $(CXXFLAGS) -MT unit_tests/gtest/src/libgtest_la-gtest-all.lo -MD -MP -MF unit_tests/gtest/src/$(DEPDIR)/libgtest_la-gtest-all.Tpo -c -o unit_tests/gtest/src/libgtest_la-gtest-all.lo `test -f 'unit_tests/gtest/src/gtest-all.cc' || echo '$(srcdir)/'`unit_tests/gtest/src/gtest-all.cc
+@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) unit_tests/gtest/src/$(DEPDIR)/libgtest_la-gtest-all.Tpo unit_tests/gtest/src/$(DEPDIR)/libgtest_la-gtest-all.Plo
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='unit_tests/gtest/src/gtest-all.cc' object='unit_tests/gtest/src/libgtest_la-gtest-all.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgtest_la_CXXFLAGS) $(CXXFLAGS) -c -o unit_tests/gtest/src/libgtest_la-gtest-all.lo `test -f 'unit_tests/gtest/src/gtest-all.cc' || echo '$(srcdir)/'`unit_tests/gtest/src/gtest-all.cc
+
+unit_tests/gtest/src/libgtest_main_la-gtest_main.lo: unit_tests/gtest/src/gtest_main.cc
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgtest_main_la_CXXFLAGS) $(CXXFLAGS) -MT unit_tests/gtest/src/libgtest_main_la-gtest_main.lo -MD -MP -MF unit_tests/gtest/src/$(DEPDIR)/libgtest_main_la-gtest_main.Tpo -c -o unit_tests/gtest/src/libgtest_main_la-gtest_main.lo `test -f 'unit_tests/gtest/src/gtest_main.cc' || echo '$(srcdir)/'`unit_tests/gtest/src/gtest_main.cc
+@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) unit_tests/gtest/src/$(DEPDIR)/libgtest_main_la-gtest_main.Tpo unit_tests/gtest/src/$(DEPDIR)/libgtest_main_la-gtest_main.Plo
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='unit_tests/gtest/src/gtest_main.cc' object='unit_tests/gtest/src/libgtest_main_la-gtest_main.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgtest_main_la_CXXFLAGS) $(CXXFLAGS) -c -o unit_tests/gtest/src/libgtest_main_la-gtest_main.lo `test -f 'unit_tests/gtest/src/gtest_main.cc' || echo '$(srcdir)/'`unit_tests/gtest/src/gtest_main.cc
+
+unit_tests/all_tests-test_mer_database.o: unit_tests/test_mer_database.cc
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(all_tests_CXXFLAGS) $(CXXFLAGS) -MT unit_tests/all_tests-test_mer_database.o -MD -MP -MF unit_tests/$(DEPDIR)/all_tests-test_mer_database.Tpo -c -o unit_tests/all_tests-test_mer_database.o `test -f 'unit_tests/test_mer_database.cc' || echo '$(srcdir)/'`unit_tests/test_mer_database.cc
+@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) unit_tests/$(DEPDIR)/all_tests-test_mer_database.Tpo unit_tests/$(DEPDIR)/all_tests-test_mer_database.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='unit_tests/test_mer_database.cc' object='unit_tests/all_tests-test_mer_database.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(all_tests_CXXFLAGS) $(CXXFLAGS) -c -o unit_tests/all_tests-test_mer_database.o `test -f 'unit_tests/test_mer_database.cc' || echo '$(srcdir)/'`unit_tests/test_mer_database.cc
+
+unit_tests/all_tests-test_mer_database.obj: unit_tests/test_mer_database.cc
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(all_tests_CXXFLAGS) $(CXXFLAGS) -MT unit_tests/all_tests-test_mer_database.obj -MD -MP -MF unit_tests/$(DEPDIR)/all_tests-test_mer_database.Tpo -c -o unit_tests/all_tests-test_mer_database.obj `if test -f 'unit_tests/test_mer_database.cc'; then $(CYGPATH_W) 'unit_tests/test_mer_database.cc'; else $(CYGPATH_W) '$(srcdir)/unit_tests/test_mer_database.cc'; fi`
+@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) unit_tests/$(DEPDIR)/all_tests-test_mer_database.Tpo unit_tests/$(DEPDIR)/all_tests-test_mer_database.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='unit_tests/test_mer_database.cc' object='unit_tests/all_tests-test_mer_database.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(all_tests_CXXFLAGS) $(CXXFLAGS) -c -o unit_tests/all_tests-test_mer_database.obj `if test -f 'unit_tests/test_mer_database.cc'; then $(CYGPATH_W) 'unit_tests/test_mer_database.cc'; else $(CYGPATH_W) '$(srcdir)/unit_tests/test_mer_database.cc'; fi`
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+	-rm -rf unit_tests/gtest/src/.libs unit_tests/gtest/src/_libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+install-dist_dataDATA: $(dist_data_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(dist_data_DATA)'; test -n "$(datadir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(datadir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(datadir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(datadir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(datadir)" || exit $$?; \
+	done
+
+uninstall-dist_dataDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(dist_data_DATA)'; test -n "$(datadir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(datadir)'; $(am__uninstall_files_from_dir)
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary"$(AM_TESTSUITE_SUMMARY_HEADER)"$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+
+check-TESTS: $(check_PROGRAMS) $(check_LTLIBRARIES)
+	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
+	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
+	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
+	exit $$?;
+recheck: all $(check_PROGRAMS) $(check_LTLIBRARIES)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+all_tests.log: all_tests$(EXEEXT)
+	@p='all_tests$(EXEEXT)'; \
+	b='all_tests'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.test.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.test$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
+	$(am__post_remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
+
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
+
+dist-zstd: distdir
+	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
+	$(am__post_remove_distdir)
+
+dist-tarZ: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__post_remove_distdir)
+
+dist-shar: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
+	$(am__post_remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__post_remove_distdir)
+
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	*.tar.zst*) \
+	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
+	esac
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build/sub \
+	  && ../../configure \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=../.. --prefix="$$dc_install_base" \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__post_remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_LTLIBRARIES)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) check-am
+all-am: Makefile $(PROGRAMS) $(SCRIPTS) $(DATA) $(HEADERS) config.h
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(datadir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) install-am
+install-exec: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-rm -f src/$(DEPDIR)/$(am__dirstamp)
+	-rm -f src/$(am__dirstamp)
+	-rm -f unit_tests/$(DEPDIR)/$(am__dirstamp)
+	-rm -f unit_tests/$(am__dirstamp)
+	-rm -f unit_tests/gtest/src/$(DEPDIR)/$(am__dirstamp)
+	-rm -f unit_tests/gtest/src/$(am__dirstamp)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-checkLTLIBRARIES clean-checkPROGRAMS \
+	clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+		-rm -f src/$(DEPDIR)/create_database.Po
+	-rm -f src/$(DEPDIR)/err_log.Po
+	-rm -f src/$(DEPDIR)/error_correct_reads.Po
+	-rm -f src/$(DEPDIR)/histo_mer_database.Po
+	-rm -f src/$(DEPDIR)/merge_mate_pairs.Po
+	-rm -f src/$(DEPDIR)/query_mer_database.Po
+	-rm -f src/$(DEPDIR)/split_mate_pairs.Po
+	-rm -f unit_tests/$(DEPDIR)/all_tests-test_mer_database.Po
+	-rm -f unit_tests/gtest/src/$(DEPDIR)/libgtest_la-gtest-all.Plo
+	-rm -f unit_tests/gtest/src/$(DEPDIR)/libgtest_main_la-gtest_main.Plo
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-dist_dataDATA
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-binSCRIPTS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+		-rm -f src/$(DEPDIR)/create_database.Po
+	-rm -f src/$(DEPDIR)/err_log.Po
+	-rm -f src/$(DEPDIR)/error_correct_reads.Po
+	-rm -f src/$(DEPDIR)/histo_mer_database.Po
+	-rm -f src/$(DEPDIR)/merge_mate_pairs.Po
+	-rm -f src/$(DEPDIR)/query_mer_database.Po
+	-rm -f src/$(DEPDIR)/split_mate_pairs.Po
+	-rm -f unit_tests/$(DEPDIR)/all_tests-test_mer_database.Po
+	-rm -f unit_tests/gtest/src/$(DEPDIR)/libgtest_la-gtest-all.Plo
+	-rm -f unit_tests/gtest/src/$(DEPDIR)/libgtest_main_la-gtest_main.Plo
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
+	uninstall-dist_dataDATA
+
+.MAKE: all check check-am install install-am install-exec \
+	install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles am--refresh check \
+	check-TESTS check-am clean clean-binPROGRAMS \
+	clean-checkLTLIBRARIES clean-checkPROGRAMS clean-cscope \
+	clean-generic clean-libtool cscope cscopelist-am ctags \
+	ctags-am dist dist-all dist-bzip2 dist-gzip dist-lzip \
+	dist-shar dist-tarZ dist-xz dist-zip dist-zstd distcheck \
+	distclean distclean-compile distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-binPROGRAMS install-binSCRIPTS \
+	install-data install-data-am install-dist_dataDATA install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	pdf pdf-am ps ps-am recheck tags tags-am uninstall \
+	uninstall-am uninstall-binPROGRAMS uninstall-binSCRIPTS \
+	uninstall-dist_dataDATA
+
+.PRECIOUS: Makefile
+
+.yaggo.hpp:
+	@echo yaggo $< $@
+	$(V_YAGGO)$(YAGGO) --license $(srcdir)/header-license -o $@ $<
+
+.fa.jf:
+	$(AM_V_GEN)mkdir -p $(@D); $(JELLYFISH) count -m 24 -s 5k -C -t 10 -o $@ $<
+
+.libs/%: src/%.in Makefile
+	@mkdir -p $(dir $@) && $(inst_subst) < $< > $@
+%: src/%.in Makefile
+	$(AM_V_GEN)$(local_subst) < $< > $@ && chmod a+x $@
+
+-include $(srcdir)/local.mk
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/README b/README
deleted file mode 120000
index 42061c0..0000000
--- a/README
+++ /dev/null
@@ -1 +0,0 @@
-README.md
\ No newline at end of file
diff --git a/README b/README
new file mode 100644
index 0000000..3b6fa32
--- /dev/null
+++ b/README
@@ -0,0 +1,120 @@
+# Platform
+
+Quorum has been tested on Linux with gcc 4.4 to gcc 4.7.
+
+# Installation
+
+
+You should download the latest release distribution tar ball from the
+[releases section](https://github.com/gmarcais/Quorum/releases). If
+compiling from the github tree code, you will need `autoconf`,
+`automake` and `yaggo`. You can download `yaggo` from the
+[github release page](https://github.com/gmarcais/yaggo/releases) and
+copy the `yaggo` problem into your `PATH`.
+
+Quorum requires [Jellyfish](https://github.com/gmarcais/Jellyfish/releases) to be installed.
+For Quorum to compile `pkg-config` must find Jellyfish. The following command must pring "OK":
+
+~~~
+pkg-config --exists jellyfish-2.0 && echo OK
+~~~
+
+If not, set the variable `PKG_CONFIG_PATH` appropriately.
+
+If installing from the github tree, first run `autoreconf -fi`. Then
+install the usual way:
+
+~~~
+./configure --prefix=/path/where/to/install
+make
+make install
+~~~
+
+The last command may need to be run as root, if installing in a system directory.
+
+# Usage
+
+Only one switch (`-s`) is required to run Quorum. This switch specify
+the size of the Jellyfish hash and it must be large enough so that all
+k-mers will fit into memory. With Illumina reads, a good estimate for
+this size is:
+
+  (G + k * n) / 0.8
+
+where G is the estimated genome size, k is the k-mer length (24 by
+default) and n is the number of reads. If the chosen size is too
+small, quorum will stop with the error message: "Failed: Increase the
+size parameter".
+
+For example, for a bacteria with 2 million Illumina reads in files
+read1.fastq and read2.fastq, the command would be:
+
+~~~
+quorum -s 50M read1.fastq read2.fastq
+~~~
+
+The output corrected file is called by default `quorum_corrected.fa`.
+
+#Output format
+
+The correction made are appended to the header line in the fasta
+format. For example, the following 101 bases long read:
+
+~~~
+  @1204
+  GACCGGGCATGGGCTGAGCCTGTTCGGGAAGCTGACGGAGCCGGAAGAGGCCGGGATCGACCCTTCCGCCCCGCCCGCCGACTGGGTCGACCGGCCGGGCG
+~~~  
+
+is corrected to:
+
+~~~
+  >1204 86:sub:T-C 91:3_trunc 62:5_trunc
+  CTTCCGCCCCGCCCGCCGACTGGGCCGAC
+~~~
+
+The coordinate system is 0-based in the original reads (like a C or
+Perl array). Here, at base 86 a substitution was made from T to C. The
+5\_trunc is the index of the first base (0 if not specified) and the
+3\_trunc is the index after the last base (read length if not
+specified). Hence, the length of the corrected reads is computed as
+3\_trunc - 5\_trunc (29 in this example). The uncorrected and corrected
+reads align as follows:
+
+~~~
+0                                                            62                      86   91        101
+|                                                             |                       |    |         |
+GACCGGGCATGGGCTGAGCCTGTTCGGGAAGCTGACGGAGCCGGAAGAGGCCGGGATCGACCCTTCCGCCCCGCCCGCCGACTGGGTCGACCGGCCGGGCG
+                                                              CTTCCGCCCCGCCCGCCGACTGGGCCGAC
+~~~
+
+# Switches
+
+Other useful switches include (see `quorum --help` for a short
+description of all of them).
+
+* `--threads NUMBER`
+
+Number of threads to use.
+
+* `--kmer-len LENGTH`
+
+Length of k-mer to use. Defaults to 24. This is limited to 31.
+
+* `--contaminant FILE`
+
+Pass in a fasta or fastq file of contaminant sequences. The error
+correction program will truncate any reads which contains a k-mer
+present in the contaminant sequences.
+
+* `--prefix NAME`
+
+By default, all output file have the form `quorum_*`. This can be
+changed with this switch.
+
+* `--min-q-char ASCII`
+
+This is the ASCII value of the base of quality encoding. If not
+specified, it is auto-detected: the first 1,000 reads of the first
+file are read and the minimum quality value seen in these reads is
+used for min-q-char. An error is raised if this auto-detected base is
+not one of the standard value (33, 59 or 64).
diff --git a/README.md b/README.md
deleted file mode 100644
index 3b6fa32..0000000
--- a/README.md
+++ /dev/null
@@ -1,120 +0,0 @@
-# Platform
-
-Quorum has been tested on Linux with gcc 4.4 to gcc 4.7.
-
-# Installation
-
-
-You should download the latest release distribution tar ball from the
-[releases section](https://github.com/gmarcais/Quorum/releases). If
-compiling from the github tree code, you will need `autoconf`,
-`automake` and `yaggo`. You can download `yaggo` from the
-[github release page](https://github.com/gmarcais/yaggo/releases) and
-copy the `yaggo` problem into your `PATH`.
-
-Quorum requires [Jellyfish](https://github.com/gmarcais/Jellyfish/releases) to be installed.
-For Quorum to compile `pkg-config` must find Jellyfish. The following command must pring "OK":
-
-~~~
-pkg-config --exists jellyfish-2.0 && echo OK
-~~~
-
-If not, set the variable `PKG_CONFIG_PATH` appropriately.
-
-If installing from the github tree, first run `autoreconf -fi`. Then
-install the usual way:
-
-~~~
-./configure --prefix=/path/where/to/install
-make
-make install
-~~~
-
-The last command may need to be run as root, if installing in a system directory.
-
-# Usage
-
-Only one switch (`-s`) is required to run Quorum. This switch specify
-the size of the Jellyfish hash and it must be large enough so that all
-k-mers will fit into memory. With Illumina reads, a good estimate for
-this size is:
-
-  (G + k * n) / 0.8
-
-where G is the estimated genome size, k is the k-mer length (24 by
-default) and n is the number of reads. If the chosen size is too
-small, quorum will stop with the error message: "Failed: Increase the
-size parameter".
-
-For example, for a bacteria with 2 million Illumina reads in files
-read1.fastq and read2.fastq, the command would be:
-
-~~~
-quorum -s 50M read1.fastq read2.fastq
-~~~
-
-The output corrected file is called by default `quorum_corrected.fa`.
-
-#Output format
-
-The correction made are appended to the header line in the fasta
-format. For example, the following 101 bases long read:
-
-~~~
-  @1204
-  GACCGGGCATGGGCTGAGCCTGTTCGGGAAGCTGACGGAGCCGGAAGAGGCCGGGATCGACCCTTCCGCCCCGCCCGCCGACTGGGTCGACCGGCCGGGCG
-~~~  
-
-is corrected to:
-
-~~~
-  >1204 86:sub:T-C 91:3_trunc 62:5_trunc
-  CTTCCGCCCCGCCCGCCGACTGGGCCGAC
-~~~
-
-The coordinate system is 0-based in the original reads (like a C or
-Perl array). Here, at base 86 a substitution was made from T to C. The
-5\_trunc is the index of the first base (0 if not specified) and the
-3\_trunc is the index after the last base (read length if not
-specified). Hence, the length of the corrected reads is computed as
-3\_trunc - 5\_trunc (29 in this example). The uncorrected and corrected
-reads align as follows:
-
-~~~
-0                                                            62                      86   91        101
-|                                                             |                       |    |         |
-GACCGGGCATGGGCTGAGCCTGTTCGGGAAGCTGACGGAGCCGGAAGAGGCCGGGATCGACCCTTCCGCCCCGCCCGCCGACTGGGTCGACCGGCCGGGCG
-                                                              CTTCCGCCCCGCCCGCCGACTGGGCCGAC
-~~~
-
-# Switches
-
-Other useful switches include (see `quorum --help` for a short
-description of all of them).
-
-* `--threads NUMBER`
-
-Number of threads to use.
-
-* `--kmer-len LENGTH`
-
-Length of k-mer to use. Defaults to 24. This is limited to 31.
-
-* `--contaminant FILE`
-
-Pass in a fasta or fastq file of contaminant sequences. The error
-correction program will truncate any reads which contains a k-mer
-present in the contaminant sequences.
-
-* `--prefix NAME`
-
-By default, all output file have the form `quorum_*`. This can be
-changed with this switch.
-
-* `--min-q-char ASCII`
-
-This is the ASCII value of the base of quality encoding. If not
-specified, it is auto-detected: the first 1,000 reads of the first
-file are read and the minimum quality value seen in these reads is
-used for min-q-char. An error is raised if this auto-detected base is
-not one of the standard value (33, 59 or 64).
diff --git a/aclocal.m4 b/aclocal.m4
new file mode 100644
index 0000000..b0bdd7c
--- /dev/null
+++ b/aclocal.m4
@@ -0,0 +1,1499 @@
+# generated automatically by aclocal 1.16.5 -*- Autoconf -*-
+
+# Copyright (C) 1996-2021 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.71],,
+[m4_warning([this file was generated for autoconf 2.71.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# pkg.m4 - Macros to locate and use pkg-config.   -*- Autoconf -*-
+# serial 12 (pkg-config-0.29.2)
+
+dnl Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+dnl Copyright © 2012-2015 Dan Nicholson <dbn.lists@gmail.com>
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 2 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful, but
+dnl WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+dnl General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program; if not, write to the Free Software
+dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+dnl 02111-1307, USA.
+dnl
+dnl As a special exception to the GNU General Public License, if you
+dnl distribute this file as part of a program that contains a
+dnl configuration script generated by Autoconf, you may include it under
+dnl the same distribution terms that you use for the rest of that
+dnl program.
+
+dnl PKG_PREREQ(MIN-VERSION)
+dnl -----------------------
+dnl Since: 0.29
+dnl
+dnl Verify that the version of the pkg-config macros are at least
+dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's
+dnl installed version of pkg-config, this checks the developer's version
+dnl of pkg.m4 when generating configure.
+dnl
+dnl To ensure that this macro is defined, also add:
+dnl m4_ifndef([PKG_PREREQ],
+dnl     [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])])
+dnl
+dnl See the "Since" comment for each macro you use to see what version
+dnl of the macros you require.
+m4_defun([PKG_PREREQ],
+[m4_define([PKG_MACROS_VERSION], [0.29.2])
+m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1,
+    [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])])
+])dnl PKG_PREREQ
+
+dnl PKG_PROG_PKG_CONFIG([MIN-VERSION])
+dnl ----------------------------------
+dnl Since: 0.16
+dnl
+dnl Search for the pkg-config tool and set the PKG_CONFIG variable to
+dnl first found in the path. Checks that the version of pkg-config found
+dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is
+dnl used since that's the first version where most current features of
+dnl pkg-config existed.
+AC_DEFUN([PKG_PROG_PKG_CONFIG],
+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
+m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
+m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
+AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
+AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=m4_default([$1], [0.9.0])
+	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		AC_MSG_RESULT([yes])
+	else
+		AC_MSG_RESULT([no])
+		PKG_CONFIG=""
+	fi
+fi[]dnl
+])dnl PKG_PROG_PKG_CONFIG
+
+dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------------------------------
+dnl Since: 0.18
+dnl
+dnl Check to see whether a particular set of modules exists. Similar to
+dnl PKG_CHECK_MODULES(), but does not set variables or print errors.
+dnl
+dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+dnl only at the first occurrence in configure.ac, so if the first place
+dnl it's called might be skipped (such as if it is within an "if", you
+dnl have to call PKG_CHECK_EXISTS manually
+AC_DEFUN([PKG_CHECK_EXISTS],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+if test -n "$PKG_CONFIG" && \
+    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
+  m4_default([$2], [:])
+m4_ifvaln([$3], [else
+  $3])dnl
+fi])
+
+dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+dnl ---------------------------------------------
+dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting
+dnl pkg_failed based on the result.
+m4_define([_PKG_CONFIG],
+[if test -n "$$1"; then
+    pkg_cv_[]$1="$$1"
+ elif test -n "$PKG_CONFIG"; then
+    PKG_CHECK_EXISTS([$3],
+                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes ],
+		     [pkg_failed=yes])
+ else
+    pkg_failed=untried
+fi[]dnl
+])dnl _PKG_CONFIG
+
+dnl _PKG_SHORT_ERRORS_SUPPORTED
+dnl ---------------------------
+dnl Internal check to see if pkg-config supports short errors.
+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi[]dnl
+])dnl _PKG_SHORT_ERRORS_SUPPORTED
+
+
+dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl   [ACTION-IF-NOT-FOUND])
+dnl --------------------------------------------------------------
+dnl Since: 0.4.0
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES might not happen, you should be sure to include an
+dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
+AC_DEFUN([PKG_CHECK_MODULES],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
+
+pkg_failed=no
+AC_MSG_CHECKING([for $2])
+
+_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
+_PKG_CONFIG([$1][_LIBS], [libs], [$2])
+
+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
+and $1[]_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.])
+
+if test $pkg_failed = yes; then
+        AC_MSG_RESULT([no])
+        _PKG_SHORT_ERRORS_SUPPORTED
+        if test $_pkg_short_errors_supported = yes; then
+                $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
+        else
+                $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
+        fi
+        # Put the nasty error message in config.log where it belongs
+        echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+
+        m4_default([$4], [AC_MSG_ERROR(
+[Package requirements ($2) were not met:
+
+$$1_PKG_ERRORS
+
+Consider adjusting the PKG_CONFIG_PATH environment variable if you
+installed software in a non-standard prefix.
+
+_PKG_TEXT])[]dnl
+        ])
+elif test $pkg_failed = untried; then
+        AC_MSG_RESULT([no])
+        m4_default([$4], [AC_MSG_FAILURE(
+[The pkg-config script could not be found or is too old.  Make sure it
+is in your PATH or set the PKG_CONFIG environment variable to the full
+path to pkg-config.
+
+_PKG_TEXT
+
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
+        ])
+else
+        $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+        $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+        AC_MSG_RESULT([yes])
+        $3
+fi[]dnl
+])dnl PKG_CHECK_MODULES
+
+
+dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl   [ACTION-IF-NOT-FOUND])
+dnl ---------------------------------------------------------------------
+dnl Since: 0.29
+dnl
+dnl Checks for existence of MODULES and gathers its build flags with
+dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags
+dnl and VARIABLE-PREFIX_LIBS from --libs.
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to
+dnl include an explicit call to PKG_PROG_PKG_CONFIG in your
+dnl configure.ac.
+AC_DEFUN([PKG_CHECK_MODULES_STATIC],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+_save_PKG_CONFIG=$PKG_CONFIG
+PKG_CONFIG="$PKG_CONFIG --static"
+PKG_CHECK_MODULES($@)
+PKG_CONFIG=$_save_PKG_CONFIG[]dnl
+])dnl PKG_CHECK_MODULES_STATIC
+
+
+dnl PKG_INSTALLDIR([DIRECTORY])
+dnl -------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable pkgconfigdir as the location where a module
+dnl should install pkg-config .pc files. By default the directory is
+dnl $libdir/pkgconfig, but the default can be changed by passing
+dnl DIRECTORY. The user can override through the --with-pkgconfigdir
+dnl parameter.
+AC_DEFUN([PKG_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+    [pkg-config installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([pkgconfigdir],
+    [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
+    [with_pkgconfigdir=]pkg_default)
+AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+])dnl PKG_INSTALLDIR
+
+
+dnl PKG_NOARCH_INSTALLDIR([DIRECTORY])
+dnl --------------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable noarch_pkgconfigdir as the location where a
+dnl module should install arch-independent pkg-config .pc files. By
+dnl default the directory is $datadir/pkgconfig, but the default can be
+dnl changed by passing DIRECTORY. The user can override through the
+dnl --with-noarch-pkgconfigdir parameter.
+AC_DEFUN([PKG_NOARCH_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+    [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([noarch-pkgconfigdir],
+    [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
+    [with_noarch_pkgconfigdir=]pkg_default)
+AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+])dnl PKG_NOARCH_INSTALLDIR
+
+
+dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
+dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------
+dnl Since: 0.28
+dnl
+dnl Retrieves the value of the pkg-config variable for the given module.
+AC_DEFUN([PKG_CHECK_VAR],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
+
+_PKG_CONFIG([$1], [variable="][$3]["], [$2])
+AS_VAR_COPY([$1], [pkg_cv_][$1])
+
+AS_VAR_IF([$1], [""], [$5], [$4])dnl
+])dnl PKG_CHECK_VAR
+
+dnl PKG_WITH_MODULES(VARIABLE-PREFIX, MODULES,
+dnl   [ACTION-IF-FOUND],[ACTION-IF-NOT-FOUND],
+dnl   [DESCRIPTION], [DEFAULT])
+dnl ------------------------------------------
+dnl
+dnl Prepare a "--with-" configure option using the lowercase
+dnl [VARIABLE-PREFIX] name, merging the behaviour of AC_ARG_WITH and
+dnl PKG_CHECK_MODULES in a single macro.
+AC_DEFUN([PKG_WITH_MODULES],
+[
+m4_pushdef([with_arg], m4_tolower([$1]))
+
+m4_pushdef([description],
+           [m4_default([$5], [build with ]with_arg[ support])])
+
+m4_pushdef([def_arg], [m4_default([$6], [auto])])
+m4_pushdef([def_action_if_found], [AS_TR_SH([with_]with_arg)=yes])
+m4_pushdef([def_action_if_not_found], [AS_TR_SH([with_]with_arg)=no])
+
+m4_case(def_arg,
+            [yes],[m4_pushdef([with_without], [--without-]with_arg)],
+            [m4_pushdef([with_without],[--with-]with_arg)])
+
+AC_ARG_WITH(with_arg,
+     AS_HELP_STRING(with_without, description[ @<:@default=]def_arg[@:>@]),,
+    [AS_TR_SH([with_]with_arg)=def_arg])
+
+AS_CASE([$AS_TR_SH([with_]with_arg)],
+            [yes],[PKG_CHECK_MODULES([$1],[$2],$3,$4)],
+            [auto],[PKG_CHECK_MODULES([$1],[$2],
+                                        [m4_n([def_action_if_found]) $3],
+                                        [m4_n([def_action_if_not_found]) $4])])
+
+m4_popdef([with_arg])
+m4_popdef([description])
+m4_popdef([def_arg])
+
+])dnl PKG_WITH_MODULES
+
+dnl PKG_HAVE_WITH_MODULES(VARIABLE-PREFIX, MODULES,
+dnl   [DESCRIPTION], [DEFAULT])
+dnl -----------------------------------------------
+dnl
+dnl Convenience macro to trigger AM_CONDITIONAL after PKG_WITH_MODULES
+dnl check._[VARIABLE-PREFIX] is exported as make variable.
+AC_DEFUN([PKG_HAVE_WITH_MODULES],
+[
+PKG_WITH_MODULES([$1],[$2],,,[$3],[$4])
+
+AM_CONDITIONAL([HAVE_][$1],
+               [test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"])
+])dnl PKG_HAVE_WITH_MODULES
+
+dnl PKG_HAVE_DEFINE_WITH_MODULES(VARIABLE-PREFIX, MODULES,
+dnl   [DESCRIPTION], [DEFAULT])
+dnl ------------------------------------------------------
+dnl
+dnl Convenience macro to run AM_CONDITIONAL and AC_DEFINE after
+dnl PKG_WITH_MODULES check. HAVE_[VARIABLE-PREFIX] is exported as make
+dnl and preprocessor variable.
+AC_DEFUN([PKG_HAVE_DEFINE_WITH_MODULES],
+[
+PKG_HAVE_WITH_MODULES([$1],[$2],[$3],[$4])
+
+AS_IF([test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"],
+        [AC_DEFINE([HAVE_][$1], 1, [Enable ]m4_tolower([$1])[ support])])
+])dnl PKG_HAVE_DEFINE_WITH_MODULES
+
+# Copyright (C) 2002-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.16'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.16.5], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.16.5])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
+      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
+      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
+      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                    [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+  [--enable-dependency-tracking],
+  [do not reject slow dependency extractors])
+AS_HELP_STRING(
+  [--disable-dependency-tracking],
+  [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Older Autoconf quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  # TODO: see whether this extra hack can be removed once we start
+  # requiring Autoconf 2.70 or later.
+  AS_CASE([$CONFIG_FILES],
+          [*\'*], [eval set x "$CONFIG_FILES"],
+          [*], [set x $CONFIG_FILES])
+  shift
+  # Used to flag and report bootstrapping failures.
+  am_rc=0
+  for am_mf
+  do
+    # Strip MF so we end up with the name of the file.
+    am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile which includes
+    # dependency-tracking related rules and includes.
+    # Grep'ing the whole file directly is not great: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
+      || continue
+    am_dirpart=`AS_DIRNAME(["$am_mf"])`
+    am_filepart=`AS_BASENAME(["$am_mf"])`
+    AM_RUN_LOG([cd "$am_dirpart" \
+      && sed -e '/# am--include-marker/d' "$am_filepart" \
+        | $MAKE -f - am--depfiles]) || am_rc=$?
+  done
+  if test $am_rc -ne 0; then
+    AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments
+    for automatic dependency tracking.  If GNU make was not used, consider
+    re-running the configure script with MAKE="gmake" (or whatever is
+    necessary).  You can also try re-running configure with the
+    '--disable-dependency-tracking' option to at least be able to build
+    the package (albeit without support for automatic dependency tracking).])
+  fi
+  AS_UNSET([am_dirpart])
+  AS_UNSET([am_filepart])
+  AS_UNSET([am_mf])
+  AS_UNSET([am_rc])
+  rm -f conftest-deps.mk
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking is enabled.
+# This creates each '.Po' and '.Plo' makefile fragment that we'll need in
+# order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+m4_ifdef([_$0_ALREADY_INIT],
+  [m4_fatal([$0 expanded multiple times
+]m4_defn([_$0_ALREADY_INIT]))],
+  [m4_define([_$0_ALREADY_INIT], m4_expansion_stack)])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+             [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+  m4_ifset([AC_PACKAGE_NAME], [ok]):m4_ifset([AC_PACKAGE_VERSION], [ok]),
+  [ok:ok],,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES([CC])],
+		  [m4_define([AC_PROG_CC],
+			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES([CXX])],
+		  [m4_define([AC_PROG_CXX],
+			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES([OBJC])],
+		  [m4_define([AC_PROG_OBJC],
+			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+		  [_AM_DEPENDENCIES([OBJCXX])],
+		  [m4_define([AC_PROG_OBJCXX],
+			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+# Variables for tags utilities; see am/tags.am
+if test -z "$CTAGS"; then
+  CTAGS=ctags
+fi
+AC_SUBST([CTAGS])
+if test -z "$ETAGS"; then
+  ETAGS=etags
+fi
+AC_SUBST([ETAGS])
+if test -z "$CSCOPE"; then
+  CSCOPE=cscope
+fi
+AC_SUBST([CSCOPE])
+
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <https://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+  fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST([install_sh])])
+
+# Copyright (C) 2003-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check whether make has an 'include' directive that can support all
+# the idioms we need for our automatic dependency tracking code.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive])
+cat > confinc.mk << 'END'
+am__doit:
+	@echo this is the am__doit target >confinc.out
+.PHONY: am__doit
+END
+am__include="#"
+am__quote=
+# BSD make does it like this.
+echo '.include "confinc.mk" # ignored' > confmf.BSD
+# Other make implementations (GNU, Solaris 10, AIX) do it like this.
+echo 'include confinc.mk # ignored' > confmf.GNU
+_am_result=no
+for s in GNU BSD; do
+  AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out])
+  AS_CASE([$?:`cat confinc.out 2>/dev/null`],
+      ['0:this is the am__doit target'],
+      [AS_CASE([$s],
+          [BSD], [am__include='.include' am__quote='"'],
+          [am__include='include' am__quote=''])])
+  if test "$am__include" != "#"; then
+    _am_result="yes ($s style)"
+    break
+  fi
+done
+rm -f confinc.* confmf.*
+AC_MSG_RESULT([${_am_result}])
+AC_SUBST([am__include])])
+AC_SUBST([am__quote])])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  MISSING="\${SHELL} '$am_aux_dir/missing'"
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1999-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake.  We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+  [whether $CC understands -c and -o together],
+  [am_cv_prog_cc_c_o],
+  [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$[*]" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$[*]" != "X $srcdir/configure conftest.file" \
+	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment])
+     fi
+     if test "$[2]" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+  [AC_MSG_CHECKING([that generated files are newer than configure])
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+  [--enable-silent-rules],
+  [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+  [--disable-silent-rules],
+  [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+   [am_cv_make_support_nested_variables],
+   [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+  dnl Using '$V' instead of '$(V)' breaks IRIX make.
+  AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+  [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+  [m4_case([$1],
+    [ustar],
+     [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+      # There is notably a 21 bits limit for the UID and the GID.  In fact,
+      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+      # and bug#13588).
+      am_max_uid=2097151 # 2^21 - 1
+      am_max_gid=$am_max_uid
+      # The $UID and $GID variables are not portable, so we need to resort
+      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
+      # below are definitely unexpected, so allow the users to see them
+      # (that is, avoid stderr redirection).
+      am_uid=`id -u || echo unknown`
+      am_gid=`id -g || echo unknown`
+      AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+      if test $am_uid -le $am_max_uid; then
+         AC_MSG_RESULT([yes])
+      else
+         AC_MSG_RESULT([no])
+         _am_tools=none
+      fi
+      AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+      if test $am_gid -le $am_max_gid; then
+         AC_MSG_RESULT([yes])
+      else
+        AC_MSG_RESULT([no])
+        _am_tools=none
+      fi],
+
+  [pax],
+    [],
+
+  [m4_fatal([Unknown tar format])])
+
+  AC_MSG_CHECKING([how to create a $1 tar archive])
+
+  # Go ahead even if we have the value already cached.  We do so because we
+  # need to set the values for the 'am__tar' and 'am__untar' variables.
+  _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+  for _am_tool in $_am_tools; do
+    case $_am_tool in
+    gnutar)
+      for _am_tar in tar gnutar gtar; do
+        AM_RUN_LOG([$_am_tar --version]) && break
+      done
+      am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+      am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+      am__untar="$_am_tar -xf -"
+      ;;
+    plaintar)
+      # Must skip GNU tar: if it does not support --format= it doesn't create
+      # ustar tarball either.
+      (tar --version) >/dev/null 2>&1 && continue
+      am__tar='tar chf - "$$tardir"'
+      am__tar_='tar chf - "$tardir"'
+      am__untar='tar xf -'
+      ;;
+    pax)
+      am__tar='pax -L -x $1 -w "$$tardir"'
+      am__tar_='pax -L -x $1 -w "$tardir"'
+      am__untar='pax -r'
+      ;;
+    cpio)
+      am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+      am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+      am__untar='cpio -i -H $1 -d'
+      ;;
+    none)
+      am__tar=false
+      am__tar_=false
+      am__untar=false
+      ;;
+    esac
+
+    # If the value was cached, stop now.  We just wanted to have am__tar
+    # and am__untar set.
+    test -n "${am_cv_prog_tar_$1}" && break
+
+    # tar/untar a dummy directory, and stop if the command works.
+    rm -rf conftest.dir
+    mkdir conftest.dir
+    echo GrepMe > conftest.dir/file
+    AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+    rm -rf conftest.dir
+    if test -s conftest.tar; then
+      AM_RUN_LOG([$am__untar <conftest.tar])
+      AM_RUN_LOG([cat conftest.dir/file])
+      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+    fi
+  done
+  rm -rf conftest.dir
+
+  AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+  AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([m4/libtool.m4])
+m4_include([m4/ltoptions.m4])
+m4_include([m4/ltsugar.m4])
+m4_include([m4/ltversion.m4])
+m4_include([m4/lt~obsolete.m4])
diff --git a/build-aux/.gitignore b/build-aux/.gitignore
deleted file mode 100644
index 5e7d273..0000000
--- a/build-aux/.gitignore
+++ /dev/null
@@ -1,4 +0,0 @@
-# Ignore everything in this directory
-*
-# Except this file
-!.gitignore
diff --git a/build-aux/compile b/build-aux/compile
new file mode 100755
index 0000000..df363c8
--- /dev/null
+++ b/build-aux/compile
@@ -0,0 +1,348 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 1999-2021 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN* | MSYS*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin/* | msys/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.[oO][bB][jJ])
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
+	-L*)
+	  func_cl_dashL "${1#-L}"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
+  icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as 'compile cc -o foo foo.c'.
+	# So we strip '-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/build-aux/config.guess b/build-aux/config.guess
new file mode 100755
index 0000000..7f76b62
--- /dev/null
+++ b/build-aux/config.guess
@@ -0,0 +1,1754 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright 1992-2022 Free Software Foundation, Inc.
+
+# shellcheck disable=SC2006,SC2268 # see below for rationale
+
+timestamp='2022-01-09'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <https://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+#
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
+#
+# You can get the latest version of this script from:
+# https://git.savannah.gnu.org/cgit/config.git/plain/config.guess
+#
+# Please send patches to <config-patches@gnu.org>.
+
+
+# The "shellcheck disable" line above the timestamp inhibits complaints
+# about features and limitations of the classic Bourne shell that were
+# superseded or lifted in POSIX.  However, this script identifies a wide
+# variety of pre-POSIX systems that do not have POSIX shells at all, and
+# even some reasonably current systems (Solaris 10 as case-in-point) still
+# have a pre-POSIX /bin/sh.
+
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Options:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright 1992-2022 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+# Just in case it came from the environment.
+GUESS=
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+tmp=
+# shellcheck disable=SC2172
+trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15
+
+set_cc_for_build() {
+    # prevent multiple calls if $tmp is already set
+    test "$tmp" && return 0
+    : "${TMPDIR=/tmp}"
+    # shellcheck disable=SC2039,SC3028
+    { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+	{ test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } ||
+	{ tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+	{ echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; }
+    dummy=$tmp/dummy
+    case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in
+	,,)    echo "int x;" > "$dummy.c"
+	       for driver in cc gcc c89 c99 ; do
+		   if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
+		       CC_FOR_BUILD=$driver
+		       break
+		   fi
+	       done
+	       if test x"$CC_FOR_BUILD" = x ; then
+		   CC_FOR_BUILD=no_compiler_found
+	       fi
+	       ;;
+	,,*)   CC_FOR_BUILD=$CC ;;
+	,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+    esac
+}
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if test -f /.attbin/uname ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+case $UNAME_SYSTEM in
+Linux|GNU|GNU/*)
+	LIBC=unknown
+
+	set_cc_for_build
+	cat <<-EOF > "$dummy.c"
+	#include <features.h>
+	#if defined(__UCLIBC__)
+	LIBC=uclibc
+	#elif defined(__dietlibc__)
+	LIBC=dietlibc
+	#elif defined(__GLIBC__)
+	LIBC=gnu
+	#else
+	#include <stdarg.h>
+	/* First heuristic to detect musl libc.  */
+	#ifdef __DEFINED_va_list
+	LIBC=musl
+	#endif
+	#endif
+	EOF
+	cc_set_libc=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
+	eval "$cc_set_libc"
+
+	# Second heuristic to detect musl libc.
+	if [ "$LIBC" = unknown ] &&
+	   command -v ldd >/dev/null &&
+	   ldd --version 2>&1 | grep -q ^musl; then
+		LIBC=musl
+	fi
+
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	if [ "$LIBC" = unknown ]; then
+		LIBC=gnu
+	fi
+	;;
+esac
+
+# Note: order is significant - the case branches are not exclusive.
+
+case $UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
+	    /sbin/sysctl -n hw.machine_arch 2>/dev/null || \
+	    /usr/sbin/sysctl -n hw.machine_arch 2>/dev/null || \
+	    echo unknown)`
+	case $UNAME_MACHINE_ARCH in
+	    aarch64eb) machine=aarch64_be-unknown ;;
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
+	    earmv*)
+		arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
+		endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'`
+		machine=${arch}${endian}-unknown
+		;;
+	    *) machine=$UNAME_MACHINE_ARCH-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently (or will in the future) and ABI.
+	case $UNAME_MACHINE_ARCH in
+	    earm*)
+		os=netbsdelf
+		;;
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep -q __ELF__
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+		os=netbsd
+		;;
+	esac
+	# Determine ABI tags.
+	case $UNAME_MACHINE_ARCH in
+	    earm*)
+		expr='s/^earmv[0-9]/-eabi/;s/eb$//'
+		abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"`
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case $UNAME_VERSION in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	GUESS=$machine-${os}${release}${abi-}
+	;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	GUESS=$UNAME_MACHINE_ARCH-unknown-bitrig$UNAME_RELEASE
+	;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	GUESS=$UNAME_MACHINE_ARCH-unknown-openbsd$UNAME_RELEASE
+	;;
+    *:SecBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/SecBSD.//'`
+	GUESS=$UNAME_MACHINE_ARCH-unknown-secbsd$UNAME_RELEASE
+	;;
+    *:LibertyBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
+	GUESS=$UNAME_MACHINE_ARCH-unknown-libertybsd$UNAME_RELEASE
+	;;
+    *:MidnightBSD:*:*)
+	GUESS=$UNAME_MACHINE-unknown-midnightbsd$UNAME_RELEASE
+	;;
+    *:ekkoBSD:*:*)
+	GUESS=$UNAME_MACHINE-unknown-ekkobsd$UNAME_RELEASE
+	;;
+    *:SolidBSD:*:*)
+	GUESS=$UNAME_MACHINE-unknown-solidbsd$UNAME_RELEASE
+	;;
+    *:OS108:*:*)
+	GUESS=$UNAME_MACHINE-unknown-os108_$UNAME_RELEASE
+	;;
+    macppc:MirBSD:*:*)
+	GUESS=powerpc-unknown-mirbsd$UNAME_RELEASE
+	;;
+    *:MirBSD:*:*)
+	GUESS=$UNAME_MACHINE-unknown-mirbsd$UNAME_RELEASE
+	;;
+    *:Sortix:*:*)
+	GUESS=$UNAME_MACHINE-unknown-sortix
+	;;
+    *:Twizzler:*:*)
+	GUESS=$UNAME_MACHINE-unknown-twizzler
+	;;
+    *:Redox:*:*)
+	GUESS=$UNAME_MACHINE-unknown-redox
+	;;
+    mips:OSF1:*.*)
+	GUESS=mips-dec-osf1
+	;;
+    alpha:OSF1:*:*)
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	trap '' 0
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case $ALPHA_CPU_TYPE in
+	    "EV4 (21064)")
+		UNAME_MACHINE=alpha ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE=alpha ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE=alpha ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE=alphaev5 ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE=alphaev56 ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE=alphapca56 ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE=alphapca57 ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE=alphaev6 ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE=alphaev67 ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE=alphaev68 ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE=alphaev68 ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE=alphaev68 ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE=alphaev69 ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE=alphaev7 ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE=alphaev79 ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	OSF_REL=`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
+	GUESS=$UNAME_MACHINE-dec-osf$OSF_REL
+	;;
+    Amiga*:UNIX_System_V:4.0:*)
+	GUESS=m68k-unknown-sysv4
+	;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	GUESS=$UNAME_MACHINE-unknown-amigaos
+	;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	GUESS=$UNAME_MACHINE-unknown-morphos
+	;;
+    *:OS/390:*:*)
+	GUESS=i370-ibm-openedition
+	;;
+    *:z/VM:*:*)
+	GUESS=s390-ibm-zvmoe
+	;;
+    *:OS400:*:*)
+	GUESS=powerpc-ibm-os400
+	;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	GUESS=arm-acorn-riscix$UNAME_RELEASE
+	;;
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
+	GUESS=arm-unknown-riscos
+	;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	GUESS=hppa1.1-hitachi-hiuxmpp
+	;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	case `(/bin/universe) 2>/dev/null` in
+	    att) GUESS=pyramid-pyramid-sysv3 ;;
+	    *)   GUESS=pyramid-pyramid-bsd   ;;
+	esac
+	;;
+    NILE*:*:*:dcosx)
+	GUESS=pyramid-pyramid-svr4
+	;;
+    DRS?6000:unix:4.0:6*)
+	GUESS=sparc-icl-nx6
+	;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) GUESS=sparc-icl-nx7 ;;
+	esac
+	;;
+    s390x:SunOS:*:*)
+	SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
+	GUESS=$UNAME_MACHINE-ibm-solaris2$SUN_REL
+	;;
+    sun4H:SunOS:5.*:*)
+	SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
+	GUESS=sparc-hal-solaris2$SUN_REL
+	;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
+	GUESS=sparc-sun-solaris2$SUN_REL
+	;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	GUESS=i386-pc-auroraux$UNAME_RELEASE
+	;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	set_cc_for_build
+	SUN_ARCH=i386
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if test "$CC_FOR_BUILD" != no_compiler_found; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS="" $CC_FOR_BUILD -m64 -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH=x86_64
+	    fi
+	fi
+	SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
+	GUESS=$SUN_ARCH-pc-solaris2$SUN_REL
+	;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
+	GUESS=sparc-sun-solaris3$SUN_REL
+	;;
+    sun4*:SunOS:*:*)
+	case `/usr/bin/arch -k` in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/'`
+	GUESS=sparc-sun-sunos$SUN_REL
+	;;
+    sun3*:SunOS:*:*)
+	GUESS=m68k-sun-sunos$UNAME_RELEASE
+	;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3
+	case `/bin/arch` in
+	    sun3)
+		GUESS=m68k-sun-sunos$UNAME_RELEASE
+		;;
+	    sun4)
+		GUESS=sparc-sun-sunos$UNAME_RELEASE
+		;;
+	esac
+	;;
+    aushp:SunOS:*:*)
+	GUESS=sparc-auspex-sunos$UNAME_RELEASE
+	;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+	GUESS=m68k-atari-mint$UNAME_RELEASE
+	;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	GUESS=m68k-atari-mint$UNAME_RELEASE
+	;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+	GUESS=m68k-atari-mint$UNAME_RELEASE
+	;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+	GUESS=m68k-milan-mint$UNAME_RELEASE
+	;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+	GUESS=m68k-hades-mint$UNAME_RELEASE
+	;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+	GUESS=m68k-unknown-mint$UNAME_RELEASE
+	;;
+    m68k:machten:*:*)
+	GUESS=m68k-apple-machten$UNAME_RELEASE
+	;;
+    powerpc:machten:*:*)
+	GUESS=powerpc-apple-machten$UNAME_RELEASE
+	;;
+    RISC*:Mach:*:*)
+	GUESS=mips-dec-mach_bsd4.3
+	;;
+    RISC*:ULTRIX:*:*)
+	GUESS=mips-dec-ultrix$UNAME_RELEASE
+	;;
+    VAX*:ULTRIX*:*:*)
+	GUESS=vax-dec-ultrix$UNAME_RELEASE
+	;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	GUESS=clipper-intergraph-clix$UNAME_RELEASE
+	;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	set_cc_for_build
+	sed 's/^	//' << EOF > "$dummy.c"
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o "$dummy" "$dummy.c" &&
+	  dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`"$dummy" "$dummyarg"` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	GUESS=mips-mips-riscos$UNAME_RELEASE
+	;;
+    Motorola:PowerMAX_OS:*:*)
+	GUESS=powerpc-motorola-powermax
+	;;
+    Motorola:*:4.3:PL8-*)
+	GUESS=powerpc-harris-powermax
+	;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	GUESS=powerpc-harris-powermax
+	;;
+    Night_Hawk:Power_UNIX:*:*)
+	GUESS=powerpc-harris-powerunix
+	;;
+    m88k:CX/UX:7*:*)
+	GUESS=m88k-harris-cxux7
+	;;
+    m88k:*:4*:R4*)
+	GUESS=m88k-motorola-sysv4
+	;;
+    m88k:*:3*:R3*)
+	GUESS=m88k-motorola-sysv3
+	;;
+    AViiON:dgux:*:*)
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if test "$UNAME_PROCESSOR" = mc88100 || test "$UNAME_PROCESSOR" = mc88110
+	then
+	    if test "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx || \
+	       test "$TARGET_BINARY_INTERFACE"x = x
+	    then
+		GUESS=m88k-dg-dgux$UNAME_RELEASE
+	    else
+		GUESS=m88k-dg-dguxbcs$UNAME_RELEASE
+	    fi
+	else
+	    GUESS=i586-dg-dgux$UNAME_RELEASE
+	fi
+	;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	GUESS=m88k-dolphin-sysv3
+	;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	GUESS=m88k-motorola-sysv3
+	;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	GUESS=m88k-tektronix-sysv3
+	;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	GUESS=m68k-tektronix-bsd
+	;;
+    *:IRIX*:*:*)
+	IRIX_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/g'`
+	GUESS=mips-sgi-irix$IRIX_REL
+	;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	GUESS=romp-ibm-aix    # uname -m gives an 8 hex-code CPU id
+	;;                    # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	GUESS=i386-ibm-aix
+	;;
+    ia64:AIX:*:*)
+	if test -x /usr/bin/oslevel ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=$UNAME_VERSION.$UNAME_RELEASE
+	fi
+	GUESS=$UNAME_MACHINE-ibm-aix$IBM_REV
+	;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		set_cc_for_build
+		sed 's/^		//' << EOF > "$dummy.c"
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"`
+		then
+			GUESS=$SYSTEM_NAME
+		else
+			GUESS=rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		GUESS=rs6000-ibm-aix3.2.4
+	else
+		GUESS=rs6000-ibm-aix3.2
+	fi
+	;;
+    *:AIX:*:[4567])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if test -x /usr/bin/lslpp ; then
+		IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | \
+			   awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
+	else
+		IBM_REV=$UNAME_VERSION.$UNAME_RELEASE
+	fi
+	GUESS=$IBM_ARCH-ibm-aix$IBM_REV
+	;;
+    *:AIX:*:*)
+	GUESS=rs6000-ibm-aix
+	;;
+    ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*)
+	GUESS=romp-ibm-bsd4.4
+	;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	GUESS=romp-ibm-bsd$UNAME_RELEASE    # 4.3 with uname added to
+	;;                                  # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	GUESS=rs6000-bull-bosx
+	;;
+    DPX/2?00:B.O.S.:*:*)
+	GUESS=m68k-bull-sysv3
+	;;
+    9000/[34]??:4.3bsd:1.*:*)
+	GUESS=m68k-hp-bsd
+	;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	GUESS=m68k-hp-bsd4.4
+	;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'`
+	case $UNAME_MACHINE in
+	    9000/31?)            HP_ARCH=m68000 ;;
+	    9000/[34]??)         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if test -x /usr/bin/getconf; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+		    case $sc_cpu_version in
+		      523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case $sc_kernel_bits in
+			  32) HP_ARCH=hppa2.0n ;;
+			  64) HP_ARCH=hppa2.0w ;;
+			  '') HP_ARCH=hppa2.0 ;;   # HP-UX 10.20
+			esac ;;
+		    esac
+		fi
+		if test "$HP_ARCH" = ""; then
+		    set_cc_for_build
+		    sed 's/^		//' << EOF > "$dummy.c"
+
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
+
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
+
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
+EOF
+		    (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if test "$HP_ARCH" = hppa2.0w
+	then
+	    set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep -q __LP64__
+	    then
+		HP_ARCH=hppa2.0w
+	    else
+		HP_ARCH=hppa64
+	    fi
+	fi
+	GUESS=$HP_ARCH-hp-hpux$HPUX_REV
+	;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'`
+	GUESS=ia64-hp-hpux$HPUX_REV
+	;;
+    3050*:HI-UX:*:*)
+	set_cc_for_build
+	sed 's/^	//' << EOF > "$dummy.c"
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	GUESS=unknown-hitachi-hiuxwe2
+	;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*)
+	GUESS=hppa1.1-hp-bsd
+	;;
+    9000/8??:4.3bsd:*:*)
+	GUESS=hppa1.0-hp-bsd
+	;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	GUESS=hppa1.0-hp-mpeix
+	;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*)
+	GUESS=hppa1.1-hp-osf
+	;;
+    hp8??:OSF1:*:*)
+	GUESS=hppa1.0-hp-osf
+	;;
+    i*86:OSF1:*:*)
+	if test -x /usr/sbin/sysversion ; then
+	    GUESS=$UNAME_MACHINE-unknown-osf1mk
+	else
+	    GUESS=$UNAME_MACHINE-unknown-osf1
+	fi
+	;;
+    parisc*:Lites*:*:*)
+	GUESS=hppa1.1-hp-lites
+	;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	GUESS=c1-convex-bsd
+	;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	GUESS=c34-convex-bsd
+	;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	GUESS=c38-convex-bsd
+	;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	GUESS=c4-convex-bsd
+	;;
+    CRAY*Y-MP:*:*:*)
+	CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
+	GUESS=ymp-cray-unicos$CRAY_REL
+	;;
+    CRAY*[A-Z]90:*:*:*)
+	echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
+	GUESS=t90-cray-unicos$CRAY_REL
+	;;
+    CRAY*T3E:*:*:*)
+	CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
+	GUESS=alphaev5-cray-unicosmk$CRAY_REL
+	;;
+    CRAY*SV1:*:*:*)
+	CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
+	GUESS=sv1-cray-unicos$CRAY_REL
+	;;
+    *:UNICOS/mp:*:*)
+	CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
+	GUESS=craynv-cray-unicosmp$CRAY_REL
+	;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
+	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+	FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'`
+	GUESS=${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}
+	;;
+    5000:UNIX_System_V:4.*:*)
+	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+	FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
+	GUESS=sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}
+	;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	GUESS=$UNAME_MACHINE-pc-bsdi$UNAME_RELEASE
+	;;
+    sparc*:BSD/OS:*:*)
+	GUESS=sparc-unknown-bsdi$UNAME_RELEASE
+	;;
+    *:BSD/OS:*:*)
+	GUESS=$UNAME_MACHINE-unknown-bsdi$UNAME_RELEASE
+	;;
+    arm:FreeBSD:*:*)
+	UNAME_PROCESSOR=`uname -p`
+	set_cc_for_build
+	if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_PCS_VFP
+	then
+	    FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
+	    GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabi
+	else
+	    FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
+	    GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabihf
+	fi
+	;;
+    *:FreeBSD:*:*)
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case $UNAME_PROCESSOR in
+	    amd64)
+		UNAME_PROCESSOR=x86_64 ;;
+	    i386)
+		UNAME_PROCESSOR=i586 ;;
+	esac
+	FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
+	GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL
+	;;
+    i*:CYGWIN*:*)
+	GUESS=$UNAME_MACHINE-pc-cygwin
+	;;
+    *:MINGW64*:*)
+	GUESS=$UNAME_MACHINE-pc-mingw64
+	;;
+    *:MINGW*:*)
+	GUESS=$UNAME_MACHINE-pc-mingw32
+	;;
+    *:MSYS*:*)
+	GUESS=$UNAME_MACHINE-pc-msys
+	;;
+    i*:PW*:*)
+	GUESS=$UNAME_MACHINE-pc-pw32
+	;;
+    *:SerenityOS:*:*)
+        GUESS=$UNAME_MACHINE-pc-serenity
+        ;;
+    *:Interix*:*)
+	case $UNAME_MACHINE in
+	    x86)
+		GUESS=i586-pc-interix$UNAME_RELEASE
+		;;
+	    authenticamd | genuineintel | EM64T)
+		GUESS=x86_64-unknown-interix$UNAME_RELEASE
+		;;
+	    IA64)
+		GUESS=ia64-unknown-interix$UNAME_RELEASE
+		;;
+	esac ;;
+    i*:UWIN*:*)
+	GUESS=$UNAME_MACHINE-pc-uwin
+	;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	GUESS=x86_64-pc-cygwin
+	;;
+    prep*:SunOS:5.*:*)
+	SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
+	GUESS=powerpcle-unknown-solaris2$SUN_REL
+	;;
+    *:GNU:*:*)
+	# the GNU system
+	GNU_ARCH=`echo "$UNAME_MACHINE" | sed -e 's,[-/].*$,,'`
+	GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's,/.*$,,'`
+	GUESS=$GNU_ARCH-unknown-$LIBC$GNU_REL
+	;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	GNU_SYS=`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"`
+	GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
+	GUESS=$UNAME_MACHINE-unknown-$GNU_SYS$GNU_REL-$LIBC
+	;;
+    *:Minix:*:*)
+	GUESS=$UNAME_MACHINE-unknown-minix
+	;;
+    aarch64:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' /proc/cpuinfo 2>/dev/null` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+	esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    arc:Linux:*:* | arceb:Linux:*:* | arc32:Linux:*:* | arc64:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    arm*:Linux:*:*)
+	set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	else
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabi
+	    else
+		GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabihf
+	    fi
+	fi
+	;;
+    avr32*:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    cris:Linux:*:*)
+	GUESS=$UNAME_MACHINE-axis-linux-$LIBC
+	;;
+    crisv32:Linux:*:*)
+	GUESS=$UNAME_MACHINE-axis-linux-$LIBC
+	;;
+    e2k:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    frv:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    hexagon:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    i*86:Linux:*:*)
+	GUESS=$UNAME_MACHINE-pc-linux-$LIBC
+	;;
+    ia64:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    k1om:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    loongarch32:Linux:*:* | loongarch64:Linux:*:* | loongarchx32:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    m32r*:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    m68*:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    mips:Linux:*:* | mips64:Linux:*:*)
+	set_cc_for_build
+	IS_GLIBC=0
+	test x"${LIBC}" = xgnu && IS_GLIBC=1
+	sed 's/^	//' << EOF > "$dummy.c"
+	#undef CPU
+	#undef mips
+	#undef mipsel
+	#undef mips64
+	#undef mips64el
+	#if ${IS_GLIBC} && defined(_ABI64)
+	LIBCABI=gnuabi64
+	#else
+	#if ${IS_GLIBC} && defined(_ABIN32)
+	LIBCABI=gnuabin32
+	#else
+	LIBCABI=${LIBC}
+	#endif
+	#endif
+
+	#if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
+	CPU=mipsisa64r6
+	#else
+	#if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
+	CPU=mipsisa32r6
+	#else
+	#if defined(__mips64)
+	CPU=mips64
+	#else
+	CPU=mips
+	#endif
+	#endif
+	#endif
+
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	MIPS_ENDIAN=el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	MIPS_ENDIAN=
+	#else
+	MIPS_ENDIAN=
+	#endif
+	#endif
+EOF
+	cc_set_vars=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'`
+	eval "$cc_set_vars"
+	test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; }
+	;;
+    mips64el:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    openrisc*:Linux:*:*)
+	GUESS=or1k-unknown-linux-$LIBC
+	;;
+    or32:Linux:*:* | or1k*:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    padre:Linux:*:*)
+	GUESS=sparc-unknown-linux-$LIBC
+	;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	GUESS=hppa64-unknown-linux-$LIBC
+	;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) GUESS=hppa1.1-unknown-linux-$LIBC ;;
+	  PA8*) GUESS=hppa2.0-unknown-linux-$LIBC ;;
+	  *)    GUESS=hppa-unknown-linux-$LIBC ;;
+	esac
+	;;
+    ppc64:Linux:*:*)
+	GUESS=powerpc64-unknown-linux-$LIBC
+	;;
+    ppc:Linux:*:*)
+	GUESS=powerpc-unknown-linux-$LIBC
+	;;
+    ppc64le:Linux:*:*)
+	GUESS=powerpc64le-unknown-linux-$LIBC
+	;;
+    ppcle:Linux:*:*)
+	GUESS=powerpcle-unknown-linux-$LIBC
+	;;
+    riscv32:Linux:*:* | riscv32be:Linux:*:* | riscv64:Linux:*:* | riscv64be:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	GUESS=$UNAME_MACHINE-ibm-linux-$LIBC
+	;;
+    sh64*:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    sh*:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    tile*:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    vax:Linux:*:*)
+	GUESS=$UNAME_MACHINE-dec-linux-$LIBC
+	;;
+    x86_64:Linux:*:*)
+	set_cc_for_build
+	LIBCABI=$LIBC
+	if test "$CC_FOR_BUILD" != no_compiler_found; then
+	    if (echo '#ifdef __ILP32__'; echo IS_X32; echo '#endif') | \
+		(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_X32 >/dev/null
+	    then
+		LIBCABI=${LIBC}x32
+	    fi
+	fi
+	GUESS=$UNAME_MACHINE-pc-linux-$LIBCABI
+	;;
+    xtensa*:Linux:*:*)
+	GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
+	;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	GUESS=i386-sequent-sysv4
+	;;
+    i*86:UNIX_SV:4.2MP:2.*)
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+	# Use sysv4.2uw... so that sysv4* matches it.
+	GUESS=$UNAME_MACHINE-pc-sysv4.2uw$UNAME_VERSION
+	;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	GUESS=$UNAME_MACHINE-pc-os2-emx
+	;;
+    i*86:XTS-300:*:STOP)
+	GUESS=$UNAME_MACHINE-unknown-stop
+	;;
+    i*86:atheos:*:*)
+	GUESS=$UNAME_MACHINE-unknown-atheos
+	;;
+    i*86:syllable:*:*)
+	GUESS=$UNAME_MACHINE-pc-syllable
+	;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+	GUESS=i386-unknown-lynxos$UNAME_RELEASE
+	;;
+    i*86:*DOS:*:*)
+	GUESS=$UNAME_MACHINE-pc-msdosdjgpp
+	;;
+    i*86:*:4.*:*)
+	UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		GUESS=$UNAME_MACHINE-univel-sysv$UNAME_REL
+	else
+		GUESS=$UNAME_MACHINE-pc-sysv$UNAME_REL
+	fi
+	;;
+    i*86:*:5:[678]*)
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	GUESS=$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		GUESS=$UNAME_MACHINE-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		GUESS=$UNAME_MACHINE-pc-sco$UNAME_REL
+	else
+		GUESS=$UNAME_MACHINE-pc-sysv32
+	fi
+	;;
+    pc:*:*:*)
+	# Left here for compatibility:
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configure will decide that
+	# this is a cross-build.
+	GUESS=i586-pc-msdosdjgpp
+	;;
+    Intel:Mach:3*:*)
+	GUESS=i386-pc-mach3
+	;;
+    paragon:*:*:*)
+	GUESS=i860-intel-osf1
+	;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  GUESS=i860-stardent-sysv$UNAME_RELEASE    # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  GUESS=i860-unknown-sysv$UNAME_RELEASE     # Unknown i860-SVR4
+	fi
+	;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	GUESS=m68010-convergent-sysv
+	;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	GUESS=m68k-convergent-sysv
+	;;
+    M680?0:D-NIX:5.3:*)
+	GUESS=m68k-diab-dnix
+	;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3"$OS_REL"; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	GUESS=m68k-unknown-lynxos$UNAME_RELEASE
+	;;
+    mc68030:UNIX_System_V:4.*:*)
+	GUESS=m68k-atari-sysv4
+	;;
+    TSUNAMI:LynxOS:2.*:*)
+	GUESS=sparc-unknown-lynxos$UNAME_RELEASE
+	;;
+    rs6000:LynxOS:2.*:*)
+	GUESS=rs6000-unknown-lynxos$UNAME_RELEASE
+	;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+	GUESS=powerpc-unknown-lynxos$UNAME_RELEASE
+	;;
+    SM[BE]S:UNIX_SV:*:*)
+	GUESS=mips-dde-sysv$UNAME_RELEASE
+	;;
+    RM*:ReliantUNIX-*:*:*)
+	GUESS=mips-sni-sysv4
+	;;
+    RM*:SINIX-*:*:*)
+	GUESS=mips-sni-sysv4
+	;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		GUESS=$UNAME_MACHINE-sni-sysv4
+	else
+		GUESS=ns32k-sni-sysv
+	fi
+	;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel@ccMail.Census.GOV>
+	GUESS=i586-unisys-sysv4
+	;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	GUESS=hppa1.1-stratus-sysv4
+	;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	GUESS=i860-stratus-sysv4
+	;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	GUESS=$UNAME_MACHINE-stratus-vos
+	;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	GUESS=hppa1.1-stratus-vos
+	;;
+    mc68*:A/UX:*:*)
+	GUESS=m68k-apple-aux$UNAME_RELEASE
+	;;
+    news*:NEWS-OS:6*:*)
+	GUESS=mips-sony-newsos6
+	;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if test -d /usr/nec; then
+		GUESS=mips-nec-sysv$UNAME_RELEASE
+	else
+		GUESS=mips-unknown-sysv$UNAME_RELEASE
+	fi
+	;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	GUESS=powerpc-be-beos
+	;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	GUESS=powerpc-apple-beos
+	;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	GUESS=i586-pc-beos
+	;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	GUESS=i586-pc-haiku
+	;;
+    x86_64:Haiku:*:*)
+	GUESS=x86_64-unknown-haiku
+	;;
+    SX-4:SUPER-UX:*:*)
+	GUESS=sx4-nec-superux$UNAME_RELEASE
+	;;
+    SX-5:SUPER-UX:*:*)
+	GUESS=sx5-nec-superux$UNAME_RELEASE
+	;;
+    SX-6:SUPER-UX:*:*)
+	GUESS=sx6-nec-superux$UNAME_RELEASE
+	;;
+    SX-7:SUPER-UX:*:*)
+	GUESS=sx7-nec-superux$UNAME_RELEASE
+	;;
+    SX-8:SUPER-UX:*:*)
+	GUESS=sx8-nec-superux$UNAME_RELEASE
+	;;
+    SX-8R:SUPER-UX:*:*)
+	GUESS=sx8r-nec-superux$UNAME_RELEASE
+	;;
+    SX-ACE:SUPER-UX:*:*)
+	GUESS=sxace-nec-superux$UNAME_RELEASE
+	;;
+    Power*:Rhapsody:*:*)
+	GUESS=powerpc-apple-rhapsody$UNAME_RELEASE
+	;;
+    *:Rhapsody:*:*)
+	GUESS=$UNAME_MACHINE-apple-rhapsody$UNAME_RELEASE
+	;;
+    arm64:Darwin:*:*)
+	GUESS=aarch64-apple-darwin$UNAME_RELEASE
+	;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p`
+	case $UNAME_PROCESSOR in
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
+	if command -v xcode-select > /dev/null 2> /dev/null && \
+		! xcode-select --print-path > /dev/null 2> /dev/null ; then
+	    # Avoid executing cc if there is no toolchain installed as
+	    # cc will be a stub that puts up a graphical alert
+	    # prompting the user to install developer tools.
+	    CC_FOR_BUILD=no_compiler_found
+	else
+	    set_cc_for_build
+	fi
+	if test "$CC_FOR_BUILD" != no_compiler_found; then
+	    if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		   (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		   grep IS_64BIT_ARCH >/dev/null
+	    then
+		case $UNAME_PROCESSOR in
+		    i386) UNAME_PROCESSOR=x86_64 ;;
+		    powerpc) UNAME_PROCESSOR=powerpc64 ;;
+		esac
+	    fi
+	    # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
+	    if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
+		   (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		   grep IS_PPC >/dev/null
+	    then
+		UNAME_PROCESSOR=powerpc
+	    fi
+	elif test "$UNAME_PROCESSOR" = i386 ; then
+	    # uname -m returns i386 or x86_64
+	    UNAME_PROCESSOR=$UNAME_MACHINE
+	fi
+	GUESS=$UNAME_PROCESSOR-apple-darwin$UNAME_RELEASE
+	;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = x86; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	GUESS=$UNAME_PROCESSOR-$UNAME_MACHINE-nto-qnx$UNAME_RELEASE
+	;;
+    *:QNX:*:4*)
+	GUESS=i386-pc-qnx
+	;;
+    NEO-*:NONSTOP_KERNEL:*:*)
+	GUESS=neo-tandem-nsk$UNAME_RELEASE
+	;;
+    NSE-*:NONSTOP_KERNEL:*:*)
+	GUESS=nse-tandem-nsk$UNAME_RELEASE
+	;;
+    NSR-*:NONSTOP_KERNEL:*:*)
+	GUESS=nsr-tandem-nsk$UNAME_RELEASE
+	;;
+    NSV-*:NONSTOP_KERNEL:*:*)
+	GUESS=nsv-tandem-nsk$UNAME_RELEASE
+	;;
+    NSX-*:NONSTOP_KERNEL:*:*)
+	GUESS=nsx-tandem-nsk$UNAME_RELEASE
+	;;
+    *:NonStop-UX:*:*)
+	GUESS=mips-compaq-nonstopux
+	;;
+    BS2000:POSIX*:*:*)
+	GUESS=bs2000-siemens-sysv
+	;;
+    DS/*:UNIX_System_V:*:*)
+	GUESS=$UNAME_MACHINE-$UNAME_SYSTEM-$UNAME_RELEASE
+	;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "${cputype-}" = 386; then
+	    UNAME_MACHINE=i386
+	elif test "x${cputype-}" != x; then
+	    UNAME_MACHINE=$cputype
+	fi
+	GUESS=$UNAME_MACHINE-unknown-plan9
+	;;
+    *:TOPS-10:*:*)
+	GUESS=pdp10-unknown-tops10
+	;;
+    *:TENEX:*:*)
+	GUESS=pdp10-unknown-tenex
+	;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	GUESS=pdp10-dec-tops20
+	;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	GUESS=pdp10-xkl-tops20
+	;;
+    *:TOPS-20:*:*)
+	GUESS=pdp10-unknown-tops20
+	;;
+    *:ITS:*:*)
+	GUESS=pdp10-unknown-its
+	;;
+    SEI:*:*:SEIUX)
+	GUESS=mips-sei-seiux$UNAME_RELEASE
+	;;
+    *:DragonFly:*:*)
+	DRAGONFLY_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
+	GUESS=$UNAME_MACHINE-unknown-dragonfly$DRAGONFLY_REL
+	;;
+    *:*VMS:*:*)
+	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case $UNAME_MACHINE in
+	    A*) GUESS=alpha-dec-vms ;;
+	    I*) GUESS=ia64-dec-vms ;;
+	    V*) GUESS=vax-dec-vms ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	GUESS=i386-pc-xenix
+	;;
+    i*86:skyos:*:*)
+	SKYOS_REL=`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`
+	GUESS=$UNAME_MACHINE-pc-skyos$SKYOS_REL
+	;;
+    i*86:rdos:*:*)
+	GUESS=$UNAME_MACHINE-pc-rdos
+	;;
+    i*86:Fiwix:*:*)
+	GUESS=$UNAME_MACHINE-pc-fiwix
+	;;
+    *:AROS:*:*)
+	GUESS=$UNAME_MACHINE-unknown-aros
+	;;
+    x86_64:VMkernel:*:*)
+	GUESS=$UNAME_MACHINE-unknown-esx
+	;;
+    amd64:Isilon\ OneFS:*:*)
+	GUESS=x86_64-unknown-onefs
+	;;
+    *:Unleashed:*:*)
+	GUESS=$UNAME_MACHINE-unknown-unleashed$UNAME_RELEASE
+	;;
+esac
+
+# Do we have a guess based on uname results?
+if test "x$GUESS" != x; then
+    echo "$GUESS"
+    exit
+fi
+
+# No uname command or uname output not recognized.
+set_cc_for_build
+cat > "$dummy.c" <<EOF
+#ifdef _SEQUENT_
+#include <sys/types.h>
+#include <sys/utsname.h>
+#endif
+#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
+#if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
+#include <signal.h>
+#if defined(_SIZE_T_) || defined(SIGLOST)
+#include <sys/utsname.h>
+#endif
+#endif
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+  "4"
+#else
+  ""
+#endif
+  ); exit (0);
+#endif
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+  struct utsname un;
+
+  uname(&un);
+  if (strncmp(un.version, "V2", 2) == 0) {
+    printf ("i386-sequent-ptx2\n"); exit (0);
+  }
+  if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+    printf ("i386-sequent-ptx1\n"); exit (0);
+  }
+  printf ("i386-sequent-ptx\n"); exit (0);
+#endif
+
+#if defined (vax)
+#if !defined (ultrix)
+#include <sys/param.h>
+#if defined (BSD)
+#if BSD == 43
+  printf ("vax-dec-bsd4.3\n"); exit (0);
+#else
+#if BSD == 199006
+  printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#else
+  printf ("vax-dec-bsd\n"); exit (0);
+#endif
+#endif
+#else
+  printf ("vax-dec-bsd\n"); exit (0);
+#endif
+#else
+#if defined(_SIZE_T_) || defined(SIGLOST)
+  struct utsname un;
+  uname (&un);
+  printf ("vax-dec-ultrix%s\n", un.release); exit (0);
+#else
+  printf ("vax-dec-ultrix\n"); exit (0);
+#endif
+#endif
+#endif
+#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
+#if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
+#if defined(_SIZE_T_) || defined(SIGLOST)
+  struct utsname *un;
+  uname (&un);
+  printf ("mips-dec-ultrix%s\n", un.release); exit (0);
+#else
+  printf ("mips-dec-ultrix\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null && SYSTEM_NAME=`"$dummy"` &&
+	{ echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; }
+
+echo "$0: unable to guess system type" >&2
+
+case $UNAME_MACHINE:$UNAME_SYSTEM in
+    mips:Linux | mips64:Linux)
+	# If we got here on MIPS GNU/Linux, output extra information.
+	cat >&2 <<EOF
+
+NOTE: MIPS GNU/Linux systems require a C compiler to fully recognize
+the system type. Please install a C compiler and try again.
+EOF
+	;;
+esac
+
+cat >&2 <<EOF
+
+This script (version $timestamp), has failed to recognize the
+operating system you are using. If your script is old, overwrite *all*
+copies of config.guess and config.sub with the latest versions from:
+
+  https://git.savannah.gnu.org/cgit/config.git/plain/config.guess
+and
+  https://git.savannah.gnu.org/cgit/config.git/plain/config.sub
+EOF
+
+our_year=`echo $timestamp | sed 's,-.*,,'`
+thisyear=`date +%Y`
+# shellcheck disable=SC2003
+script_age=`expr "$thisyear" - "$our_year"`
+if test "$script_age" -lt 3 ; then
+   cat >&2 <<EOF
+
+If $0 has already been updated, send the following data and any
+information you think might be pertinent to config-patches@gnu.org to
+provide the necessary information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = "$UNAME_MACHINE"
+UNAME_RELEASE = "$UNAME_RELEASE"
+UNAME_SYSTEM  = "$UNAME_SYSTEM"
+UNAME_VERSION = "$UNAME_VERSION"
+EOF
+fi
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/build-aux/config.sub b/build-aux/config.sub
new file mode 100755
index 0000000..dba16e8
--- /dev/null
+++ b/build-aux/config.sub
@@ -0,0 +1,1890 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright 1992-2022 Free Software Foundation, Inc.
+
+# shellcheck disable=SC2006,SC2268 # see below for rationale
+
+timestamp='2022-01-03'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <https://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+
+
+# Please send patches to <config-patches@gnu.org>.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# https://git.savannah.gnu.org/cgit/config.git/plain/config.sub
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+# The "shellcheck disable" line above the timestamp inhibits complaints
+# about features and limitations of the classic Bourne shell that were
+# superseded or lifted in POSIX.  However, this script identifies a wide
+# variety of pre-POSIX systems that do not have POSIX shells at all, and
+# even some reasonably current systems (Solaris 10 as case-in-point) still
+# have a pre-POSIX /bin/sh.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
+
+Canonicalize a configuration name.
+
+Options:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright 1992-2022 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo "$1"
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Split fields of configuration type
+# shellcheck disable=SC2162
+saved_IFS=$IFS
+IFS="-" read field1 field2 field3 field4 <<EOF
+$1
+EOF
+IFS=$saved_IFS
+
+# Separate into logical components for further validation
+case $1 in
+	*-*-*-*-*)
+		echo Invalid configuration \`"$1"\': more than four components >&2
+		exit 1
+		;;
+	*-*-*-*)
+		basic_machine=$field1-$field2
+		basic_os=$field3-$field4
+		;;
+	*-*-*)
+		# Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two
+		# parts
+		maybe_os=$field2-$field3
+		case $maybe_os in
+			nto-qnx* | linux-* | uclinux-uclibc* \
+			| uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \
+			| netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \
+			| storm-chaos* | os2-emx* | rtmk-nova*)
+				basic_machine=$field1
+				basic_os=$maybe_os
+				;;
+			android-linux)
+				basic_machine=$field1-unknown
+				basic_os=linux-android
+				;;
+			*)
+				basic_machine=$field1-$field2
+				basic_os=$field3
+				;;
+		esac
+		;;
+	*-*)
+		# A lone config we happen to match not fitting any pattern
+		case $field1-$field2 in
+			decstation-3100)
+				basic_machine=mips-dec
+				basic_os=
+				;;
+			*-*)
+				# Second component is usually, but not always the OS
+				case $field2 in
+					# Prevent following clause from handling this valid os
+					sun*os*)
+						basic_machine=$field1
+						basic_os=$field2
+						;;
+					zephyr*)
+						basic_machine=$field1-unknown
+						basic_os=$field2
+						;;
+					# Manufacturers
+					dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \
+					| att* | 7300* | 3300* | delta* | motorola* | sun[234]* \
+					| unicom* | ibm* | next | hp | isi* | apollo | altos* \
+					| convergent* | ncr* | news | 32* | 3600* | 3100* \
+					| hitachi* | c[123]* | convex* | sun | crds | omron* | dg \
+					| ultra | tti* | harris | dolphin | highlevel | gould \
+					| cbm | ns | masscomp | apple | axis | knuth | cray \
+					| microblaze* | sim | cisco \
+					| oki | wec | wrs | winbond)
+						basic_machine=$field1-$field2
+						basic_os=
+						;;
+					*)
+						basic_machine=$field1
+						basic_os=$field2
+						;;
+				esac
+			;;
+		esac
+		;;
+	*)
+		# Convert single-component short-hands not valid as part of
+		# multi-component configurations.
+		case $field1 in
+			386bsd)
+				basic_machine=i386-pc
+				basic_os=bsd
+				;;
+			a29khif)
+				basic_machine=a29k-amd
+				basic_os=udi
+				;;
+			adobe68k)
+				basic_machine=m68010-adobe
+				basic_os=scout
+				;;
+			alliant)
+				basic_machine=fx80-alliant
+				basic_os=
+				;;
+			altos | altos3068)
+				basic_machine=m68k-altos
+				basic_os=
+				;;
+			am29k)
+				basic_machine=a29k-none
+				basic_os=bsd
+				;;
+			amdahl)
+				basic_machine=580-amdahl
+				basic_os=sysv
+				;;
+			amiga)
+				basic_machine=m68k-unknown
+				basic_os=
+				;;
+			amigaos | amigados)
+				basic_machine=m68k-unknown
+				basic_os=amigaos
+				;;
+			amigaunix | amix)
+				basic_machine=m68k-unknown
+				basic_os=sysv4
+				;;
+			apollo68)
+				basic_machine=m68k-apollo
+				basic_os=sysv
+				;;
+			apollo68bsd)
+				basic_machine=m68k-apollo
+				basic_os=bsd
+				;;
+			aros)
+				basic_machine=i386-pc
+				basic_os=aros
+				;;
+			aux)
+				basic_machine=m68k-apple
+				basic_os=aux
+				;;
+			balance)
+				basic_machine=ns32k-sequent
+				basic_os=dynix
+				;;
+			blackfin)
+				basic_machine=bfin-unknown
+				basic_os=linux
+				;;
+			cegcc)
+				basic_machine=arm-unknown
+				basic_os=cegcc
+				;;
+			convex-c1)
+				basic_machine=c1-convex
+				basic_os=bsd
+				;;
+			convex-c2)
+				basic_machine=c2-convex
+				basic_os=bsd
+				;;
+			convex-c32)
+				basic_machine=c32-convex
+				basic_os=bsd
+				;;
+			convex-c34)
+				basic_machine=c34-convex
+				basic_os=bsd
+				;;
+			convex-c38)
+				basic_machine=c38-convex
+				basic_os=bsd
+				;;
+			cray)
+				basic_machine=j90-cray
+				basic_os=unicos
+				;;
+			crds | unos)
+				basic_machine=m68k-crds
+				basic_os=
+				;;
+			da30)
+				basic_machine=m68k-da30
+				basic_os=
+				;;
+			decstation | pmax | pmin | dec3100 | decstatn)
+				basic_machine=mips-dec
+				basic_os=
+				;;
+			delta88)
+				basic_machine=m88k-motorola
+				basic_os=sysv3
+				;;
+			dicos)
+				basic_machine=i686-pc
+				basic_os=dicos
+				;;
+			djgpp)
+				basic_machine=i586-pc
+				basic_os=msdosdjgpp
+				;;
+			ebmon29k)
+				basic_machine=a29k-amd
+				basic_os=ebmon
+				;;
+			es1800 | OSE68k | ose68k | ose | OSE)
+				basic_machine=m68k-ericsson
+				basic_os=ose
+				;;
+			gmicro)
+				basic_machine=tron-gmicro
+				basic_os=sysv
+				;;
+			go32)
+				basic_machine=i386-pc
+				basic_os=go32
+				;;
+			h8300hms)
+				basic_machine=h8300-hitachi
+				basic_os=hms
+				;;
+			h8300xray)
+				basic_machine=h8300-hitachi
+				basic_os=xray
+				;;
+			h8500hms)
+				basic_machine=h8500-hitachi
+				basic_os=hms
+				;;
+			harris)
+				basic_machine=m88k-harris
+				basic_os=sysv3
+				;;
+			hp300 | hp300hpux)
+				basic_machine=m68k-hp
+				basic_os=hpux
+				;;
+			hp300bsd)
+				basic_machine=m68k-hp
+				basic_os=bsd
+				;;
+			hppaosf)
+				basic_machine=hppa1.1-hp
+				basic_os=osf
+				;;
+			hppro)
+				basic_machine=hppa1.1-hp
+				basic_os=proelf
+				;;
+			i386mach)
+				basic_machine=i386-mach
+				basic_os=mach
+				;;
+			isi68 | isi)
+				basic_machine=m68k-isi
+				basic_os=sysv
+				;;
+			m68knommu)
+				basic_machine=m68k-unknown
+				basic_os=linux
+				;;
+			magnum | m3230)
+				basic_machine=mips-mips
+				basic_os=sysv
+				;;
+			merlin)
+				basic_machine=ns32k-utek
+				basic_os=sysv
+				;;
+			mingw64)
+				basic_machine=x86_64-pc
+				basic_os=mingw64
+				;;
+			mingw32)
+				basic_machine=i686-pc
+				basic_os=mingw32
+				;;
+			mingw32ce)
+				basic_machine=arm-unknown
+				basic_os=mingw32ce
+				;;
+			monitor)
+				basic_machine=m68k-rom68k
+				basic_os=coff
+				;;
+			morphos)
+				basic_machine=powerpc-unknown
+				basic_os=morphos
+				;;
+			moxiebox)
+				basic_machine=moxie-unknown
+				basic_os=moxiebox
+				;;
+			msdos)
+				basic_machine=i386-pc
+				basic_os=msdos
+				;;
+			msys)
+				basic_machine=i686-pc
+				basic_os=msys
+				;;
+			mvs)
+				basic_machine=i370-ibm
+				basic_os=mvs
+				;;
+			nacl)
+				basic_machine=le32-unknown
+				basic_os=nacl
+				;;
+			ncr3000)
+				basic_machine=i486-ncr
+				basic_os=sysv4
+				;;
+			netbsd386)
+				basic_machine=i386-pc
+				basic_os=netbsd
+				;;
+			netwinder)
+				basic_machine=armv4l-rebel
+				basic_os=linux
+				;;
+			news | news700 | news800 | news900)
+				basic_machine=m68k-sony
+				basic_os=newsos
+				;;
+			news1000)
+				basic_machine=m68030-sony
+				basic_os=newsos
+				;;
+			necv70)
+				basic_machine=v70-nec
+				basic_os=sysv
+				;;
+			nh3000)
+				basic_machine=m68k-harris
+				basic_os=cxux
+				;;
+			nh[45]000)
+				basic_machine=m88k-harris
+				basic_os=cxux
+				;;
+			nindy960)
+				basic_machine=i960-intel
+				basic_os=nindy
+				;;
+			mon960)
+				basic_machine=i960-intel
+				basic_os=mon960
+				;;
+			nonstopux)
+				basic_machine=mips-compaq
+				basic_os=nonstopux
+				;;
+			os400)
+				basic_machine=powerpc-ibm
+				basic_os=os400
+				;;
+			OSE68000 | ose68000)
+				basic_machine=m68000-ericsson
+				basic_os=ose
+				;;
+			os68k)
+				basic_machine=m68k-none
+				basic_os=os68k
+				;;
+			paragon)
+				basic_machine=i860-intel
+				basic_os=osf
+				;;
+			parisc)
+				basic_machine=hppa-unknown
+				basic_os=linux
+				;;
+			psp)
+				basic_machine=mipsallegrexel-sony
+				basic_os=psp
+				;;
+			pw32)
+				basic_machine=i586-unknown
+				basic_os=pw32
+				;;
+			rdos | rdos64)
+				basic_machine=x86_64-pc
+				basic_os=rdos
+				;;
+			rdos32)
+				basic_machine=i386-pc
+				basic_os=rdos
+				;;
+			rom68k)
+				basic_machine=m68k-rom68k
+				basic_os=coff
+				;;
+			sa29200)
+				basic_machine=a29k-amd
+				basic_os=udi
+				;;
+			sei)
+				basic_machine=mips-sei
+				basic_os=seiux
+				;;
+			sequent)
+				basic_machine=i386-sequent
+				basic_os=
+				;;
+			sps7)
+				basic_machine=m68k-bull
+				basic_os=sysv2
+				;;
+			st2000)
+				basic_machine=m68k-tandem
+				basic_os=
+				;;
+			stratus)
+				basic_machine=i860-stratus
+				basic_os=sysv4
+				;;
+			sun2)
+				basic_machine=m68000-sun
+				basic_os=
+				;;
+			sun2os3)
+				basic_machine=m68000-sun
+				basic_os=sunos3
+				;;
+			sun2os4)
+				basic_machine=m68000-sun
+				basic_os=sunos4
+				;;
+			sun3)
+				basic_machine=m68k-sun
+				basic_os=
+				;;
+			sun3os3)
+				basic_machine=m68k-sun
+				basic_os=sunos3
+				;;
+			sun3os4)
+				basic_machine=m68k-sun
+				basic_os=sunos4
+				;;
+			sun4)
+				basic_machine=sparc-sun
+				basic_os=
+				;;
+			sun4os3)
+				basic_machine=sparc-sun
+				basic_os=sunos3
+				;;
+			sun4os4)
+				basic_machine=sparc-sun
+				basic_os=sunos4
+				;;
+			sun4sol2)
+				basic_machine=sparc-sun
+				basic_os=solaris2
+				;;
+			sun386 | sun386i | roadrunner)
+				basic_machine=i386-sun
+				basic_os=
+				;;
+			sv1)
+				basic_machine=sv1-cray
+				basic_os=unicos
+				;;
+			symmetry)
+				basic_machine=i386-sequent
+				basic_os=dynix
+				;;
+			t3e)
+				basic_machine=alphaev5-cray
+				basic_os=unicos
+				;;
+			t90)
+				basic_machine=t90-cray
+				basic_os=unicos
+				;;
+			toad1)
+				basic_machine=pdp10-xkl
+				basic_os=tops20
+				;;
+			tpf)
+				basic_machine=s390x-ibm
+				basic_os=tpf
+				;;
+			udi29k)
+				basic_machine=a29k-amd
+				basic_os=udi
+				;;
+			ultra3)
+				basic_machine=a29k-nyu
+				basic_os=sym1
+				;;
+			v810 | necv810)
+				basic_machine=v810-nec
+				basic_os=none
+				;;
+			vaxv)
+				basic_machine=vax-dec
+				basic_os=sysv
+				;;
+			vms)
+				basic_machine=vax-dec
+				basic_os=vms
+				;;
+			vsta)
+				basic_machine=i386-pc
+				basic_os=vsta
+				;;
+			vxworks960)
+				basic_machine=i960-wrs
+				basic_os=vxworks
+				;;
+			vxworks68)
+				basic_machine=m68k-wrs
+				basic_os=vxworks
+				;;
+			vxworks29k)
+				basic_machine=a29k-wrs
+				basic_os=vxworks
+				;;
+			xbox)
+				basic_machine=i686-pc
+				basic_os=mingw32
+				;;
+			ymp)
+				basic_machine=ymp-cray
+				basic_os=unicos
+				;;
+			*)
+				basic_machine=$1
+				basic_os=
+				;;
+		esac
+		;;
+esac
+
+# Decode 1-component or ad-hoc basic machines
+case $basic_machine in
+	# Here we handle the default manufacturer of certain CPU types.  It is in
+	# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		cpu=hppa1.1
+		vendor=winbond
+		;;
+	op50n)
+		cpu=hppa1.1
+		vendor=oki
+		;;
+	op60c)
+		cpu=hppa1.1
+		vendor=oki
+		;;
+	ibm*)
+		cpu=i370
+		vendor=ibm
+		;;
+	orion105)
+		cpu=clipper
+		vendor=highlevel
+		;;
+	mac | mpw | mac-mpw)
+		cpu=m68k
+		vendor=apple
+		;;
+	pmac | pmac-mpw)
+		cpu=powerpc
+		vendor=apple
+		;;
+
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		cpu=m68000
+		vendor=att
+		;;
+	3b*)
+		cpu=we32k
+		vendor=att
+		;;
+	bluegene*)
+		cpu=powerpc
+		vendor=ibm
+		basic_os=cnk
+		;;
+	decsystem10* | dec10*)
+		cpu=pdp10
+		vendor=dec
+		basic_os=tops10
+		;;
+	decsystem20* | dec20*)
+		cpu=pdp10
+		vendor=dec
+		basic_os=tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		cpu=m68k
+		vendor=motorola
+		;;
+	dpx2*)
+		cpu=m68k
+		vendor=bull
+		basic_os=sysv3
+		;;
+	encore | umax | mmax)
+		cpu=ns32k
+		vendor=encore
+		;;
+	elxsi)
+		cpu=elxsi
+		vendor=elxsi
+		basic_os=${basic_os:-bsd}
+		;;
+	fx2800)
+		cpu=i860
+		vendor=alliant
+		;;
+	genix)
+		cpu=ns32k
+		vendor=ns
+		;;
+	h3050r* | hiux*)
+		cpu=hppa1.1
+		vendor=hitachi
+		basic_os=hiuxwe2
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		cpu=hppa1.0
+		vendor=hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		cpu=m68000
+		vendor=hp
+		;;
+	hp9k3[2-9][0-9])
+		cpu=m68k
+		vendor=hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		cpu=hppa1.0
+		vendor=hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		cpu=hppa1.1
+		vendor=hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		cpu=hppa1.1
+		vendor=hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		cpu=hppa1.1
+		vendor=hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		cpu=hppa1.1
+		vendor=hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		cpu=hppa1.0
+		vendor=hp
+		;;
+	i*86v32)
+		cpu=`echo "$1" | sed -e 's/86.*/86/'`
+		vendor=pc
+		basic_os=sysv32
+		;;
+	i*86v4*)
+		cpu=`echo "$1" | sed -e 's/86.*/86/'`
+		vendor=pc
+		basic_os=sysv4
+		;;
+	i*86v)
+		cpu=`echo "$1" | sed -e 's/86.*/86/'`
+		vendor=pc
+		basic_os=sysv
+		;;
+	i*86sol2)
+		cpu=`echo "$1" | sed -e 's/86.*/86/'`
+		vendor=pc
+		basic_os=solaris2
+		;;
+	j90 | j90-cray)
+		cpu=j90
+		vendor=cray
+		basic_os=${basic_os:-unicos}
+		;;
+	iris | iris4d)
+		cpu=mips
+		vendor=sgi
+		case $basic_os in
+		    irix*)
+			;;
+		    *)
+			basic_os=irix4
+			;;
+		esac
+		;;
+	miniframe)
+		cpu=m68000
+		vendor=convergent
+		;;
+	*mint | mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		cpu=m68k
+		vendor=atari
+		basic_os=mint
+		;;
+	news-3600 | risc-news)
+		cpu=mips
+		vendor=sony
+		basic_os=newsos
+		;;
+	next | m*-next)
+		cpu=m68k
+		vendor=next
+		case $basic_os in
+		    openstep*)
+		        ;;
+		    nextstep*)
+			;;
+		    ns2*)
+		      basic_os=nextstep2
+			;;
+		    *)
+		      basic_os=nextstep3
+			;;
+		esac
+		;;
+	np1)
+		cpu=np1
+		vendor=gould
+		;;
+	op50n-* | op60c-*)
+		cpu=hppa1.1
+		vendor=oki
+		basic_os=proelf
+		;;
+	pa-hitachi)
+		cpu=hppa1.1
+		vendor=hitachi
+		basic_os=hiuxwe2
+		;;
+	pbd)
+		cpu=sparc
+		vendor=tti
+		;;
+	pbb)
+		cpu=m68k
+		vendor=tti
+		;;
+	pc532)
+		cpu=ns32k
+		vendor=pc532
+		;;
+	pn)
+		cpu=pn
+		vendor=gould
+		;;
+	power)
+		cpu=power
+		vendor=ibm
+		;;
+	ps2)
+		cpu=i386
+		vendor=ibm
+		;;
+	rm[46]00)
+		cpu=mips
+		vendor=siemens
+		;;
+	rtpc | rtpc-*)
+		cpu=romp
+		vendor=ibm
+		;;
+	sde)
+		cpu=mipsisa32
+		vendor=sde
+		basic_os=${basic_os:-elf}
+		;;
+	simso-wrs)
+		cpu=sparclite
+		vendor=wrs
+		basic_os=vxworks
+		;;
+	tower | tower-32)
+		cpu=m68k
+		vendor=ncr
+		;;
+	vpp*|vx|vx-*)
+		cpu=f301
+		vendor=fujitsu
+		;;
+	w65)
+		cpu=w65
+		vendor=wdc
+		;;
+	w89k-*)
+		cpu=hppa1.1
+		vendor=winbond
+		basic_os=proelf
+		;;
+	none)
+		cpu=none
+		vendor=none
+		;;
+	leon|leon[3-9])
+		cpu=sparc
+		vendor=$basic_machine
+		;;
+	leon-*|leon[3-9]-*)
+		cpu=sparc
+		vendor=`echo "$basic_machine" | sed 's/-.*//'`
+		;;
+
+	*-*)
+		# shellcheck disable=SC2162
+		saved_IFS=$IFS
+		IFS="-" read cpu vendor <<EOF
+$basic_machine
+EOF
+		IFS=$saved_IFS
+		;;
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+		cpu=$basic_machine
+		vendor=pc
+		;;
+	# These rules are duplicated from below for sake of the special case above;
+	# i.e. things that normalized to x86 arches should also default to "pc"
+	pc98)
+		cpu=i386
+		vendor=pc
+		;;
+	x64 | amd64)
+		cpu=x86_64
+		vendor=pc
+		;;
+	# Recognize the basic CPU types without company name.
+	*)
+		cpu=$basic_machine
+		vendor=unknown
+		;;
+esac
+
+unset -v basic_machine
+
+# Decode basic machines in the full and proper CPU-Company form.
+case $cpu-$vendor in
+	# Here we handle the default manufacturer of certain CPU types in canonical form. It is in
+	# some cases the only manufacturer, in others, it is the most popular.
+	craynv-unknown)
+		vendor=cray
+		basic_os=${basic_os:-unicosmp}
+		;;
+	c90-unknown | c90-cray)
+		vendor=cray
+		basic_os=${Basic_os:-unicos}
+		;;
+	fx80-unknown)
+		vendor=alliant
+		;;
+	romp-unknown)
+		vendor=ibm
+		;;
+	mmix-unknown)
+		vendor=knuth
+		;;
+	microblaze-unknown | microblazeel-unknown)
+		vendor=xilinx
+		;;
+	rs6000-unknown)
+		vendor=ibm
+		;;
+	vax-unknown)
+		vendor=dec
+		;;
+	pdp11-unknown)
+		vendor=dec
+		;;
+	we32k-unknown)
+		vendor=att
+		;;
+	cydra-unknown)
+		vendor=cydrome
+		;;
+	i370-ibm*)
+		vendor=ibm
+		;;
+	orion-unknown)
+		vendor=highlevel
+		;;
+	xps-unknown | xps100-unknown)
+		cpu=xps100
+		vendor=honeywell
+		;;
+
+	# Here we normalize CPU types with a missing or matching vendor
+	armh-unknown | armh-alt)
+		cpu=armv7l
+		vendor=alt
+		basic_os=${basic_os:-linux-gnueabihf}
+		;;
+	dpx20-unknown | dpx20-bull)
+		cpu=rs6000
+		vendor=bull
+		basic_os=${basic_os:-bosx}
+		;;
+
+	# Here we normalize CPU types irrespective of the vendor
+	amd64-*)
+		cpu=x86_64
+		;;
+	blackfin-*)
+		cpu=bfin
+		basic_os=linux
+		;;
+	c54x-*)
+		cpu=tic54x
+		;;
+	c55x-*)
+		cpu=tic55x
+		;;
+	c6x-*)
+		cpu=tic6x
+		;;
+	e500v[12]-*)
+		cpu=powerpc
+		basic_os=${basic_os}"spe"
+		;;
+	mips3*-*)
+		cpu=mips64
+		;;
+	ms1-*)
+		cpu=mt
+		;;
+	m68knommu-*)
+		cpu=m68k
+		basic_os=linux
+		;;
+	m9s12z-* | m68hcs12z-* | hcs12z-* | s12z-*)
+		cpu=s12z
+		;;
+	openrisc-*)
+		cpu=or32
+		;;
+	parisc-*)
+		cpu=hppa
+		basic_os=linux
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		cpu=i586
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-* | athalon_*-*)
+		cpu=i686
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		cpu=i686
+		;;
+	pentium4-*)
+		cpu=i786
+		;;
+	pc98-*)
+		cpu=i386
+		;;
+	ppc-* | ppcbe-*)
+		cpu=powerpc
+		;;
+	ppcle-* | powerpclittle-*)
+		cpu=powerpcle
+		;;
+	ppc64-*)
+		cpu=powerpc64
+		;;
+	ppc64le-* | powerpc64little-*)
+		cpu=powerpc64le
+		;;
+	sb1-*)
+		cpu=mipsisa64sb1
+		;;
+	sb1el-*)
+		cpu=mipsisa64sb1el
+		;;
+	sh5e[lb]-*)
+		cpu=`echo "$cpu" | sed 's/^\(sh.\)e\(.\)$/\1\2e/'`
+		;;
+	spur-*)
+		cpu=spur
+		;;
+	strongarm-* | thumb-*)
+		cpu=arm
+		;;
+	tx39-*)
+		cpu=mipstx39
+		;;
+	tx39el-*)
+		cpu=mipstx39el
+		;;
+	x64-*)
+		cpu=x86_64
+		;;
+	xscale-* | xscalee[bl]-*)
+		cpu=`echo "$cpu" | sed 's/^xscale/arm/'`
+		;;
+	arm64-* | aarch64le-*)
+		cpu=aarch64
+		;;
+
+	# Recognize the canonical CPU Types that limit and/or modify the
+	# company names they are paired with.
+	cr16-*)
+		basic_os=${basic_os:-elf}
+		;;
+	crisv32-* | etraxfs*-*)
+		cpu=crisv32
+		vendor=axis
+		;;
+	cris-* | etrax*-*)
+		cpu=cris
+		vendor=axis
+		;;
+	crx-*)
+		basic_os=${basic_os:-elf}
+		;;
+	neo-tandem)
+		cpu=neo
+		vendor=tandem
+		;;
+	nse-tandem)
+		cpu=nse
+		vendor=tandem
+		;;
+	nsr-tandem)
+		cpu=nsr
+		vendor=tandem
+		;;
+	nsv-tandem)
+		cpu=nsv
+		vendor=tandem
+		;;
+	nsx-tandem)
+		cpu=nsx
+		vendor=tandem
+		;;
+	mipsallegrexel-sony)
+		cpu=mipsallegrexel
+		vendor=sony
+		;;
+	tile*-*)
+		basic_os=${basic_os:-linux-gnu}
+		;;
+
+	*)
+		# Recognize the canonical CPU types that are allowed with any
+		# company name.
+		case $cpu in
+			1750a | 580 \
+			| a29k \
+			| aarch64 | aarch64_be \
+			| abacus \
+			| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] \
+			| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] \
+			| alphapca5[67] | alpha64pca5[67] \
+			| am33_2.0 \
+			| amdgcn \
+			| arc | arceb | arc32 | arc64 \
+			| arm | arm[lb]e | arme[lb] | armv* \
+			| avr | avr32 \
+			| asmjs \
+			| ba \
+			| be32 | be64 \
+			| bfin | bpf | bs2000 \
+			| c[123]* | c30 | [cjt]90 | c4x \
+			| c8051 | clipper | craynv | csky | cydra \
+			| d10v | d30v | dlx | dsp16xx \
+			| e2k | elxsi | epiphany \
+			| f30[01] | f700 | fido | fr30 | frv | ft32 | fx80 \
+			| h8300 | h8500 \
+			| hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+			| hexagon \
+			| i370 | i*86 | i860 | i960 | ia16 | ia64 \
+			| ip2k | iq2000 \
+			| k1om \
+			| le32 | le64 \
+			| lm32 \
+			| loongarch32 | loongarch64 | loongarchx32 \
+			| m32c | m32r | m32rle \
+			| m5200 | m68000 | m680[012346]0 | m68360 | m683?2 | m68k \
+			| m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x \
+			| m88110 | m88k | maxq | mb | mcore | mep | metag \
+			| microblaze | microblazeel \
+			| mips | mipsbe | mipseb | mipsel | mipsle \
+			| mips16 \
+			| mips64 | mips64eb | mips64el \
+			| mips64octeon | mips64octeonel \
+			| mips64orion | mips64orionel \
+			| mips64r5900 | mips64r5900el \
+			| mips64vr | mips64vrel \
+			| mips64vr4100 | mips64vr4100el \
+			| mips64vr4300 | mips64vr4300el \
+			| mips64vr5000 | mips64vr5000el \
+			| mips64vr5900 | mips64vr5900el \
+			| mipsisa32 | mipsisa32el \
+			| mipsisa32r2 | mipsisa32r2el \
+			| mipsisa32r3 | mipsisa32r3el \
+			| mipsisa32r5 | mipsisa32r5el \
+			| mipsisa32r6 | mipsisa32r6el \
+			| mipsisa64 | mipsisa64el \
+			| mipsisa64r2 | mipsisa64r2el \
+			| mipsisa64r3 | mipsisa64r3el \
+			| mipsisa64r5 | mipsisa64r5el \
+			| mipsisa64r6 | mipsisa64r6el \
+			| mipsisa64sb1 | mipsisa64sb1el \
+			| mipsisa64sr71k | mipsisa64sr71kel \
+			| mipsr5900 | mipsr5900el \
+			| mipstx39 | mipstx39el \
+			| mmix \
+			| mn10200 | mn10300 \
+			| moxie \
+			| mt \
+			| msp430 \
+			| nds32 | nds32le | nds32be \
+			| nfp \
+			| nios | nios2 | nios2eb | nios2el \
+			| none | np1 | ns16k | ns32k | nvptx \
+			| open8 \
+			| or1k* \
+			| or32 \
+			| orion \
+			| picochip \
+			| pdp10 | pdp11 | pj | pjl | pn | power \
+			| powerpc | powerpc64 | powerpc64le | powerpcle | powerpcspe \
+			| pru \
+			| pyramid \
+			| riscv | riscv32 | riscv32be | riscv64 | riscv64be \
+			| rl78 | romp | rs6000 | rx \
+			| s390 | s390x \
+			| score \
+			| sh | shl \
+			| sh[1234] | sh[24]a | sh[24]ae[lb] | sh[23]e | she[lb] | sh[lb]e \
+			| sh[1234]e[lb] |  sh[12345][lb]e | sh[23]ele | sh64 | sh64le \
+			| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet \
+			| sparclite \
+			| sparcv8 | sparcv9 | sparcv9b | sparcv9v | sv1 | sx* \
+			| spu \
+			| tahoe \
+			| thumbv7* \
+			| tic30 | tic4x | tic54x | tic55x | tic6x | tic80 \
+			| tron \
+			| ubicom32 \
+			| v70 | v850 | v850e | v850e1 | v850es | v850e2 | v850e2v3 \
+			| vax \
+			| visium \
+			| w65 \
+			| wasm32 | wasm64 \
+			| we32k \
+			| x86 | x86_64 | xc16x | xgate | xps100 \
+			| xstormy16 | xtensa* \
+			| ymp \
+			| z8k | z80)
+				;;
+
+			*)
+				echo Invalid configuration \`"$1"\': machine \`"$cpu-$vendor"\' not recognized 1>&2
+				exit 1
+				;;
+		esac
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $vendor in
+	digital*)
+		vendor=dec
+		;;
+	commodore*)
+		vendor=cbm
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if test x$basic_os != x
+then
+
+# First recognize some ad-hoc cases, or perhaps split kernel-os, or else just
+# set os.
+case $basic_os in
+	gnu/linux*)
+		kernel=linux
+		os=`echo "$basic_os" | sed -e 's|gnu/linux|gnu|'`
+		;;
+	os2-emx)
+		kernel=os2
+		os=`echo "$basic_os" | sed -e 's|os2-emx|emx|'`
+		;;
+	nto-qnx*)
+		kernel=nto
+		os=`echo "$basic_os" | sed -e 's|nto-qnx|qnx|'`
+		;;
+	*-*)
+		# shellcheck disable=SC2162
+		saved_IFS=$IFS
+		IFS="-" read kernel os <<EOF
+$basic_os
+EOF
+		IFS=$saved_IFS
+		;;
+	# Default OS when just kernel was specified
+	nto*)
+		kernel=nto
+		os=`echo "$basic_os" | sed -e 's|nto|qnx|'`
+		;;
+	linux*)
+		kernel=linux
+		os=`echo "$basic_os" | sed -e 's|linux|gnu|'`
+		;;
+	*)
+		kernel=
+		os=$basic_os
+		;;
+esac
+
+# Now, normalize the OS (knowing we just have one component, it's not a kernel,
+# etc.)
+case $os in
+	# First match some system type aliases that might get confused
+	# with valid system types.
+	# solaris* is a basic system type, with this one exception.
+	auroraux)
+		os=auroraux
+		;;
+	bluegene*)
+		os=cnk
+		;;
+	solaris1 | solaris1.*)
+		os=`echo "$os" | sed -e 's|solaris1|sunos4|'`
+		;;
+	solaris)
+		os=solaris2
+		;;
+	unixware*)
+		os=sysv4.2uw
+		;;
+	# es1800 is here to avoid being matched by es* (a different OS)
+	es1800*)
+		os=ose
+		;;
+	# Some version numbers need modification
+	chorusos*)
+		os=chorusos
+		;;
+	isc)
+		os=isc2.2
+		;;
+	sco6)
+		os=sco5v6
+		;;
+	sco5)
+		os=sco3.2v5
+		;;
+	sco4)
+		os=sco3.2v4
+		;;
+	sco3.2.[4-9]*)
+		os=`echo "$os" | sed -e 's/sco3.2./sco3.2v/'`
+		;;
+	sco*v* | scout)
+		# Don't match below
+		;;
+	sco*)
+		os=sco3.2v2
+		;;
+	psos*)
+		os=psos
+		;;
+	qnx*)
+		os=qnx
+		;;
+	hiux*)
+		os=hiuxwe2
+		;;
+	lynx*178)
+		os=lynxos178
+		;;
+	lynx*5)
+		os=lynxos5
+		;;
+	lynxos*)
+		# don't get caught up in next wildcard
+		;;
+	lynx*)
+		os=lynxos
+		;;
+	mac[0-9]*)
+		os=`echo "$os" | sed -e 's|mac|macos|'`
+		;;
+	opened*)
+		os=openedition
+		;;
+	os400*)
+		os=os400
+		;;
+	sunos5*)
+		os=`echo "$os" | sed -e 's|sunos5|solaris2|'`
+		;;
+	sunos6*)
+		os=`echo "$os" | sed -e 's|sunos6|solaris3|'`
+		;;
+	wince*)
+		os=wince
+		;;
+	utek*)
+		os=bsd
+		;;
+	dynix*)
+		os=bsd
+		;;
+	acis*)
+		os=aos
+		;;
+	atheos*)
+		os=atheos
+		;;
+	syllable*)
+		os=syllable
+		;;
+	386bsd)
+		os=bsd
+		;;
+	ctix* | uts*)
+		os=sysv
+		;;
+	nova*)
+		os=rtmk-nova
+		;;
+	ns2)
+		os=nextstep2
+		;;
+	# Preserve the version number of sinix5.
+	sinix5.*)
+		os=`echo "$os" | sed -e 's|sinix|sysv|'`
+		;;
+	sinix*)
+		os=sysv4
+		;;
+	tpf*)
+		os=tpf
+		;;
+	triton*)
+		os=sysv3
+		;;
+	oss*)
+		os=sysv3
+		;;
+	svr4*)
+		os=sysv4
+		;;
+	svr3)
+		os=sysv3
+		;;
+	sysvr4)
+		os=sysv4
+		;;
+	ose*)
+		os=ose
+		;;
+	*mint | mint[0-9]* | *MiNT | MiNT[0-9]*)
+		os=mint
+		;;
+	dicos*)
+		os=dicos
+		;;
+	pikeos*)
+		# Until real need of OS specific support for
+		# particular features comes up, bare metal
+		# configurations are quite functional.
+		case $cpu in
+		    arm*)
+			os=eabi
+			;;
+		    *)
+			os=elf
+			;;
+		esac
+		;;
+	*)
+		# No normalization, but not necessarily accepted, that comes below.
+		;;
+esac
+
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+kernel=
+case $cpu-$vendor in
+	score-*)
+		os=elf
+		;;
+	spu-*)
+		os=elf
+		;;
+	*-acorn)
+		os=riscix1.2
+		;;
+	arm*-rebel)
+		kernel=linux
+		os=gnu
+		;;
+	arm*-semi)
+		os=aout
+		;;
+	c4x-* | tic4x-*)
+		os=coff
+		;;
+	c8051-*)
+		os=elf
+		;;
+	clipper-intergraph)
+		os=clix
+		;;
+	hexagon-*)
+		os=elf
+		;;
+	tic54x-*)
+		os=coff
+		;;
+	tic55x-*)
+		os=coff
+		;;
+	tic6x-*)
+		os=coff
+		;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=tops20
+		;;
+	pdp11-*)
+		os=none
+		;;
+	*-dec | vax-*)
+		os=ultrix4.2
+		;;
+	m68*-apollo)
+		os=domain
+		;;
+	i386-sun)
+		os=sunos4.0.2
+		;;
+	m68000-sun)
+		os=sunos3
+		;;
+	m68*-cisco)
+		os=aout
+		;;
+	mep-*)
+		os=elf
+		;;
+	mips*-cisco)
+		os=elf
+		;;
+	mips*-*)
+		os=elf
+		;;
+	or32-*)
+		os=coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=sysv3
+		;;
+	sparc-* | *-sun)
+		os=sunos4.1.1
+		;;
+	pru-*)
+		os=elf
+		;;
+	*-be)
+		os=beos
+		;;
+	*-ibm)
+		os=aix
+		;;
+	*-knuth)
+		os=mmixware
+		;;
+	*-wec)
+		os=proelf
+		;;
+	*-winbond)
+		os=proelf
+		;;
+	*-oki)
+		os=proelf
+		;;
+	*-hp)
+		os=hpux
+		;;
+	*-hitachi)
+		os=hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=sysv
+		;;
+	*-cbm)
+		os=amigaos
+		;;
+	*-dg)
+		os=dgux
+		;;
+	*-dolphin)
+		os=sysv3
+		;;
+	m68k-ccur)
+		os=rtu
+		;;
+	m88k-omron*)
+		os=luna
+		;;
+	*-next)
+		os=nextstep
+		;;
+	*-sequent)
+		os=ptx
+		;;
+	*-crds)
+		os=unos
+		;;
+	*-ns)
+		os=genix
+		;;
+	i370-*)
+		os=mvs
+		;;
+	*-gould)
+		os=sysv
+		;;
+	*-highlevel)
+		os=bsd
+		;;
+	*-encore)
+		os=bsd
+		;;
+	*-sgi)
+		os=irix
+		;;
+	*-siemens)
+		os=sysv4
+		;;
+	*-masscomp)
+		os=rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=uxpv
+		;;
+	*-rom68k)
+		os=coff
+		;;
+	*-*bug)
+		os=coff
+		;;
+	*-apple)
+		os=macos
+		;;
+	*-atari*)
+		os=mint
+		;;
+	*-wrs)
+		os=vxworks
+		;;
+	*)
+		os=none
+		;;
+esac
+
+fi
+
+# Now, validate our (potentially fixed-up) OS.
+case $os in
+	# Sometimes we do "kernel-libc", so those need to count as OSes.
+	musl* | newlib* | relibc* | uclibc*)
+		;;
+	# Likewise for "kernel-abi"
+	eabi* | gnueabi*)
+		;;
+	# VxWorks passes extra cpu info in the 4th filed.
+	simlinux | simwindows | spe)
+		;;
+	# Now accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST end in a * to match a version number.
+	gnu* | android* | bsd* | mach* | minix* | genix* | ultrix* | irix* \
+	     | *vms* | esix* | aix* | cnk* | sunos | sunos[34]* \
+	     | hpux* | unos* | osf* | luna* | dgux* | auroraux* | solaris* \
+	     | sym* |  plan9* | psp* | sim* | xray* | os68k* | v88r* \
+	     | hiux* | abug | nacl* | netware* | windows* \
+	     | os9* | macos* | osx* | ios* \
+	     | mpw* | magic* | mmixware* | mon960* | lnews* \
+	     | amigaos* | amigados* | msdos* | newsos* | unicos* | aof* \
+	     | aos* | aros* | cloudabi* | sortix* | twizzler* \
+	     | nindy* | vxsim* | vxworks* | ebmon* | hms* | mvs* \
+	     | clix* | riscos* | uniplus* | iris* | isc* | rtu* | xenix* \
+	     | mirbsd* | netbsd* | dicos* | openedition* | ose* \
+	     | bitrig* | openbsd* | secbsd* | solidbsd* | libertybsd* | os108* \
+	     | ekkobsd* | freebsd* | riscix* | lynxos* | os400* \
+	     | bosx* | nextstep* | cxux* | aout* | elf* | oabi* \
+	     | ptx* | coff* | ecoff* | winnt* | domain* | vsta* \
+	     | udi* | lites* | ieee* | go32* | aux* | hcos* \
+	     | chorusrdb* | cegcc* | glidix* | serenity* \
+	     | cygwin* | msys* | pe* | moss* | proelf* | rtems* \
+	     | midipix* | mingw32* | mingw64* | mint* \
+	     | uxpv* | beos* | mpeix* | udk* | moxiebox* \
+	     | interix* | uwin* | mks* | rhapsody* | darwin* \
+	     | openstep* | oskit* | conix* | pw32* | nonstopux* \
+	     | storm-chaos* | tops10* | tenex* | tops20* | its* \
+	     | os2* | vos* | palmos* | uclinux* | nucleus* | morphos* \
+	     | scout* | superux* | sysv* | rtmk* | tpf* | windiss* \
+	     | powermax* | dnix* | nx6 | nx7 | sei* | dragonfly* \
+	     | skyos* | haiku* | rdos* | toppers* | drops* | es* \
+	     | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \
+	     | midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi* \
+	     | nsk* | powerunix* | genode* | zvmoe* | qnx* | emx* | zephyr* \
+	     | fiwix* )
+		;;
+	# This one is extra strict with allowed versions
+	sco3.2v2 | sco3.2v[4-9]* | sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		;;
+	none)
+		;;
+	*)
+		echo Invalid configuration \`"$1"\': OS \`"$os"\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# As a final step for OS-related things, validate the OS-kernel combination
+# (given a valid OS), if there is a kernel.
+case $kernel-$os in
+	linux-gnu* | linux-dietlibc* | linux-android* | linux-newlib* \
+		   | linux-musl* | linux-relibc* | linux-uclibc* )
+		;;
+	uclinux-uclibc* )
+		;;
+	-dietlibc* | -newlib* | -musl* | -relibc* | -uclibc* )
+		# These are just libc implementations, not actual OSes, and thus
+		# require a kernel.
+		echo "Invalid configuration \`$1': libc \`$os' needs explicit kernel." 1>&2
+		exit 1
+		;;
+	kfreebsd*-gnu* | kopensolaris*-gnu*)
+		;;
+	vxworks-simlinux | vxworks-simwindows | vxworks-spe)
+		;;
+	nto-qnx*)
+		;;
+	os2-emx)
+		;;
+	*-eabi* | *-gnueabi*)
+		;;
+	-*)
+		# Blank kernel with real OS is always fine.
+		;;
+	*-*)
+		echo "Invalid configuration \`$1': Kernel \`$kernel' not known to work with OS \`$os'." 1>&2
+		exit 1
+		;;
+esac
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+case $vendor in
+	unknown)
+		case $cpu-$os in
+			*-riscix*)
+				vendor=acorn
+				;;
+			*-sunos*)
+				vendor=sun
+				;;
+			*-cnk* | *-aix*)
+				vendor=ibm
+				;;
+			*-beos*)
+				vendor=be
+				;;
+			*-hpux*)
+				vendor=hp
+				;;
+			*-mpeix*)
+				vendor=hp
+				;;
+			*-hiux*)
+				vendor=hitachi
+				;;
+			*-unos*)
+				vendor=crds
+				;;
+			*-dgux*)
+				vendor=dg
+				;;
+			*-luna*)
+				vendor=omron
+				;;
+			*-genix*)
+				vendor=ns
+				;;
+			*-clix*)
+				vendor=intergraph
+				;;
+			*-mvs* | *-opened*)
+				vendor=ibm
+				;;
+			*-os400*)
+				vendor=ibm
+				;;
+			s390-* | s390x-*)
+				vendor=ibm
+				;;
+			*-ptx*)
+				vendor=sequent
+				;;
+			*-tpf*)
+				vendor=ibm
+				;;
+			*-vxsim* | *-vxworks* | *-windiss*)
+				vendor=wrs
+				;;
+			*-aux*)
+				vendor=apple
+				;;
+			*-hms*)
+				vendor=hitachi
+				;;
+			*-mpw* | *-macos*)
+				vendor=apple
+				;;
+			*-*mint | *-mint[0-9]* | *-*MiNT | *-MiNT[0-9]*)
+				vendor=atari
+				;;
+			*-vos*)
+				vendor=stratus
+				;;
+		esac
+		;;
+esac
+
+echo "$cpu-$vendor-${kernel:+$kernel-}$os"
+exit
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/build-aux/depcomp b/build-aux/depcomp
new file mode 100755
index 0000000..715e343
--- /dev/null
+++ b/build-aux/depcomp
@@ -0,0 +1,791 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 1999-2021 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+    exit 1;
+    ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by 'PROGRAMS ARGS'.
+  object      Object file output by 'PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputting dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
+# A tabulation character.
+tab='	'
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+  # This is just like dashmstdout with a different argument.
+  dashmflag=-xM
+  depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+  # This is just like msvisualcpp but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+  # This is just like msvc7 but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+## Some versions of gcc put a space before the ':'.  On the theory
+## that the space means something, we add a space to the output as
+## well.  hp depmode also adds that space, but also prefixes the VPATH
+## to the object.  Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like '#:fec' to the end of the
+    # dependency line.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
+    echo >> "$depfile"
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+      >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+xlc)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts '$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  set_dir_from "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
+    "$@" -Wc,-M
+  else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
+    "$@" -M
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  aix_post_process_depfile
+  ;;
+
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using '\' :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
+
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  set_dir_from  "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add 'dependent.h:' lines.
+    sed -ne '2,${
+               s/^ *//
+               s/ \\*$//
+               s/$/:/
+               p
+             }' "$tmpdepfile" >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+  # The Tru64 compiler uses -MD to generate dependencies as a side
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+  # dependencies in 'foo.d' instead, so we check for that too.
+  # Subdirectories are respected.
+  set_dir_from  "$object"
+  set_base_from "$object"
+
+  if test "$libtool" = yes; then
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
+    # in $dir$base.o.d.  We have to check for both files, because
+    # one of the two compilations can be disabled.  We should prefer
+    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+    # automatically cleaned when .libs/ is deleted, while ignoring
+    # the former would cause a distcleancheck panic.
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    "$@" -Wc,-MD
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    tmpdepfile3=$dir$base.d
+    "$@" -MD
+  fi
+
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
+  ;;
+
+msvc7)
+  if test "$libtool" = yes; then
+    showIncludes=-Wc,-showIncludes
+  else
+    showIncludes=-showIncludes
+  fi
+  "$@" $showIncludes > "$tmpdepfile"
+  stat=$?
+  grep -v '^Note: including file: ' "$tmpdepfile"
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The first sed program below extracts the file names and escapes
+  # backslashes for cygpath.  The second sed program outputs the file
+  # name when reading, but also accumulates all include files in the
+  # hold buffer in order to output them again at the end.  This only
+  # works with sed implementations that can handle large buffers.
+  sed < "$tmpdepfile" -n '
+/^Note: including file:  *\(.*\)/ {
+  s//\1/
+  s/\\/\\\\/g
+  p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+  s/.*/'"$tab"'/
+  G
+  p
+}' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+  rm -f "$tmpdepfile"
+  ;;
+
+msvc7msys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for ':'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+  "$@" $dashmflag |
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no eat=no
+  for arg
+  do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  # makedepend may prepend the VPATH from the source file name to the object.
+  # No need to regex-escape $object, excess matching of '.' is harmless.
+  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+        set fnord "$@"
+        shift
+        shift
+        ;;
+    *)
+        set fnord "$@" "$arg"
+        shift
+        shift
+        ;;
+    esac
+  done
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+  echo "$tab" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/build-aux/install-sh b/build-aux/install-sh
new file mode 100755
index 0000000..ec298b5
--- /dev/null
+++ b/build-aux/install-sh
@@ -0,0 +1,541 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2020-11-14.01; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+tab='	'
+nl='
+'
+IFS=" $tab$nl"
+
+# Set DOITPROG to "echo" to test this script.
+
+doit=${DOITPROG-}
+doit_exec=${doit:-exec}
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+# Create dirs (including intermediate dirs) using mode 755.
+# This is like GNU 'install' as of coreutils 8.32 (2020).
+mkdir_umask=22
+
+backupsuffix=
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+is_target_a_directory=possibly
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -p            pass -p to $cpprog.
+  -s            $stripprog installed files.
+  -S SUFFIX     attempt to back up existing files, with suffix SUFFIX.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+
+By default, rm is invoked with -f; when overridden with RMPROG,
+it's up to you to specify -f if you want it.
+
+If -S is not specified, no backups are attempted.
+
+Email bug reports to bug-automake@gnu.org.
+Automake home page: https://www.gnu.org/software/automake/
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+        case $mode in
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+            echo "$0: invalid mode: $mode" >&2
+            exit 1;;
+        esac
+        shift;;
+
+    -o) chowncmd="$chownprog $2"
+        shift;;
+
+    -p) cpprog="$cpprog -p";;
+
+    -s) stripcmd=$stripprog;;
+
+    -S) backupsuffix="$2"
+        shift;;
+
+    -t)
+        is_target_a_directory=always
+        dst_arg=$2
+        # Protect names problematic for 'test' and other utilities.
+        case $dst_arg in
+          -* | [=\(\)!]) dst_arg=./$dst_arg;;
+        esac
+        shift;;
+
+    -T) is_target_a_directory=never;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --) shift
+        break;;
+
+    -*) echo "$0: invalid option: $1" >&2
+        exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call 'install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for 'test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+    # Don't chown directories that already exist.
+    if test $dstdir_status = 0; then
+      chowncmd=""
+    fi
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
+
+    # If destination is a directory, append the input filename.
+    if test -d "$dst"; then
+      if test "$is_target_a_directory" = never; then
+        echo "$0: $dst_arg: Is a directory" >&2
+        exit 1
+      fi
+      dstdir=$dst
+      dstbase=`basename "$src"`
+      case $dst in
+	*/) dst=$dst$dstbase;;
+	*)  dst=$dst/$dstbase;;
+      esac
+      dstdir_status=0
+    else
+      dstdir=`dirname "$dst"`
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  case $dstdir in
+    */) dstdirslash=$dstdir;;
+    *)  dstdirslash=$dstdir/;;
+  esac
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+        # With -d, create the new directory with the user-specified mode.
+        # Otherwise, rely on $mkdir_umask.
+        if test -n "$dir_arg"; then
+          mkdir_mode=-m$mode
+        else
+          mkdir_mode=
+        fi
+
+        posix_mkdir=false
+	# The $RANDOM variable is not portable (e.g., dash).  Use it
+	# here however when possible just to lower collision chance.
+	tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+
+	trap '
+	  ret=$?
+	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
+	  exit $ret
+	' 0
+
+	# Because "mkdir -p" follows existing symlinks and we likely work
+	# directly in world-writeable /tmp, make sure that the '$tmpdir'
+	# directory is successfully created first before we actually test
+	# 'mkdir -p'.
+	if (umask $mkdir_umask &&
+	    $mkdirprog $mkdir_mode "$tmpdir" &&
+	    exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+	then
+	  if test -z "$dir_arg" || {
+	       # Check for POSIX incompatibilities with -m.
+	       # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+	       # other-writable bit of parent directory when it shouldn't.
+	       # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+	       test_tmpdir="$tmpdir/a"
+	       ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+	       case $ls_ld_tmpdir in
+		 d????-?r-*) different_mode=700;;
+		 d????-?--*) different_mode=755;;
+		 *) false;;
+	       esac &&
+	       $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+		 ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+		 test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+	       }
+	     }
+	  then posix_mkdir=:
+	  fi
+	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
+	else
+	  # Remove any dirs left behind by ancient mkdir implementations.
+	  rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
+	fi
+	trap '' 0;;
+    esac
+
+    if
+      $posix_mkdir && (
+        umask $mkdir_umask &&
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+        /*) prefix='/';;
+        [-=\(\)!]*) prefix='./';;
+        *)  prefix='';;
+      esac
+
+      oIFS=$IFS
+      IFS=/
+      set -f
+      set fnord $dstdir
+      shift
+      set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+        test X"$d" = X && continue
+
+        prefix=$prefix$d
+        if test -d "$prefix"; then
+          prefixes=
+        else
+          if $posix_mkdir; then
+            (umask $mkdir_umask &&
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+            # Don't fail if two instances are running concurrently.
+            test -d "$prefix" || exit 1
+          else
+            case $prefix in
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *) qprefix=$prefix;;
+            esac
+            prefixes="$prefixes '$qprefix'"
+          fi
+        fi
+        prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+        # Don't fail if two instances are running concurrently.
+        (umask $mkdir_umask &&
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
+          test -d "$dstdir" || exit 1
+        obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=${dstdirslash}_inst.$$_
+    rmtmp=${dstdirslash}_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask &&
+     { test -z "$stripcmd" || {
+	 # Create $dsttmp read-write so that cp doesn't create it read-only,
+	 # which would cause strip to fail.
+	 if test -z "$doit"; then
+	   : >"$dsttmp" # No need to fork-exec 'touch'.
+	 else
+	   $doit touch "$dsttmp"
+	 fi
+       }
+     } &&
+     $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
+       set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       set +f &&
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # If $backupsuffix is set, and the file being installed
+      # already exists, attempt a backup.  Don't worry if it fails,
+      # e.g., if mv doesn't support -f.
+      if test -n "$backupsuffix" && test -f "$dst"; then
+        $doit $mvcmd -f "$dst" "$dst$backupsuffix" 2>/dev/null
+      fi
+
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+        # Now remove or move aside any old file at destination location.
+        # We try this two ways since rm can't unlink itself on some
+        # systems and the destination file might be busy for other
+        # reasons.  In this case, the final cleanup might fail but the new
+        # file should still install successfully.
+        {
+          test ! -f "$dst" ||
+          $doit $rmcmd "$dst" 2>/dev/null ||
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+            { $doit $rmcmd "$rmtmp" 2>/dev/null; :; }
+          } ||
+          { echo "$0: cannot unlink or rename $dst" >&2
+            (exit 1); exit 1
+          }
+        } &&
+
+        # Now rename the file to the real destination.
+        $doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/build-aux/ltmain.sh b/build-aux/ltmain.sh
new file mode 100755
index 0000000..9b12fbb
--- /dev/null
+++ b/build-aux/ltmain.sh
@@ -0,0 +1,11448 @@
+#! /usr/bin/env sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+##               by inline-source v2019-02-19.15
+
+# libtool (GNU libtool) 2.4.7
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996-2019, 2021-2022 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION="2.4.7 Debian-2.4.7-5"
+package_revision=2.4.7
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2019-02-19.15; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# This is free software.  There is NO warranty; not even for
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# Copyright (C) 2004-2019, 2021 Bootstrap Authors
+#
+# This file is dual licensed under the terms of the MIT license
+# <https://opensource.org/license/MIT>, and GPL version 2 or later
+# <http://www.gnu.org/licenses/gpl-2.0.html>.  You must apply one of
+# these licenses when using or redistributing this software or any of
+# the files within it.  See the URLs above, or the file `LICENSE`
+# included in the Bootstrap distribution for the full license texts.
+
+# Please report bugs or propose patches to:
+# <https://github.com/gnulib-modules/bootstrap/issues>
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+#   . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
+fi
+
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test set = \"\${$_G_var+set}\"; then
+          save_$_G_var=\$$_G_var
+          $_G_var=C
+	  export $_G_var
+	  _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+	  _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
+	fi"
+done
+# These NLS vars are set unconditionally (bootstrap issue #24).  Unset those
+# in case the environment reset is needed later and the $save_* variant is not
+# defined (see the code above).
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp	$nl"
+
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# func_unset VAR
+# --------------
+# Portably unset VAR.
+# In some shells, an 'unset VAR' statement leaves a non-zero return
+# status if VAR is already unset, which might be problematic if the
+# statement is used at the end of a function (thus poisoning its return
+# value) or when 'set -e' is active (causing even a spurious abort of
+# the script in this case).
+func_unset ()
+{
+    { eval $1=; (eval unset $1) >/dev/null 2>&1 && eval unset $1 || : ; }
+}
+
+
+# Make sure CDPATH doesn't cause `cd` commands to output the target dir.
+func_unset CDPATH
+
+# Make sure ${,E,F}GREP behave sanely.
+func_unset GREP_OPTIONS
+
+
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
+
+
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+    test -f "$1" && test -x "$1"
+}
+
+
+# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+    _G_progs_list=$1
+    _G_check_func=$2
+    _G_PATH=${3-"$PATH"}
+
+    _G_path_prog_max=0
+    _G_path_prog_found=false
+    _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+    for _G_dir in $_G_PATH; do
+      IFS=$_G_save_IFS
+      test -z "$_G_dir" && _G_dir=.
+      for _G_prog_name in $_G_progs_list; do
+        for _exeext in '' .EXE; do
+          _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+          func_executable_p "$_G_path_prog" || continue
+          case `"$_G_path_prog" --version 2>&1` in
+            *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+            *)     $_G_check_func $_G_path_prog
+		   func_path_progs_result=$func_check_prog_result
+		   ;;
+          esac
+          $_G_path_prog_found && break 3
+        done
+      done
+    done
+    IFS=$_G_save_IFS
+    test -z "$func_path_progs_result" && {
+      echo "no acceptable sed could be found in \$PATH" >&2
+      exit 1
+    }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+  _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+  for _G_i in 1 2 3 4 5 6 7; do
+    _G_sed_script=$_G_sed_script$nl$_G_sed_script
+  done
+  echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+  _G_sed_script=
+
+  func_check_prog_sed ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo '' >> conftest.nl
+      "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "sed gsed" func_check_prog_sed "$PATH:/usr/xpg4/bin"
+  rm -f conftest.sed
+  SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+  func_check_prog_grep ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    _G_path_prog_max=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo 'GREP' >> conftest.nl
+      "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "grep ggrep" func_check_prog_grep "$PATH:/usr/xpg4/bin"
+  GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables.  These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
+
+: ${CP="cp -f"}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+
+
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
+
+sed_dirname='s|/[^/]*$||'
+sed_basename='s|^.*/||'
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
+
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
+
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same.  If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion.  Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'.  '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+  s/$_G_bs4/&\\
+/g
+  s/^$_G_bs2$_G_dollar/$_G_bs&/
+  s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+  s/\n//g"
+
+# require_check_ifs_backslash
+# ---------------------------
+# Check if we can use backslash as IFS='\' separator, and set
+# $check_ifs_backshlash_broken to ':' or 'false'.
+require_check_ifs_backslash=func_require_check_ifs_backslash
+func_require_check_ifs_backslash ()
+{
+  _G_save_IFS=$IFS
+  IFS='\'
+  _G_check_ifs_backshlash='a\\b'
+  for _G_i in $_G_check_ifs_backshlash
+  do
+  case $_G_i in
+  a)
+    check_ifs_backshlash_broken=false
+    ;;
+  '')
+    break
+    ;;
+  *)
+    check_ifs_backshlash_broken=:
+    break
+    ;;
+  esac
+  done
+  IFS=$_G_save_IFS
+  require_check_ifs_backslash=:
+}
+
+
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
+
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
+
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+#    debug_cmd='echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
+
+# By convention, finish your script with:
+#
+#    exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath=$0
+
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
+
+# Make sure we have an absolute progpath for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
+     progdir=`cd "$progdir" && pwd`
+     progpath=$progdir/$progname
+     ;;
+  *)
+     _G_IFS=$IFS
+     IFS=${PATH_SEPARATOR-:}
+     for progdir in $PATH; do
+       IFS=$_G_IFS
+       test -x "$progdir/$progname" && break
+     done
+     IFS=$_G_IFS
+     test -n "$progdir" || progdir=`pwd`
+     progpath=$progdir/$progname
+     ;;
+esac
+
+
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
+
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
+
+opt_dry_run=false
+opt_quiet=false
+opt_verbose=false
+
+# Categories 'all' and 'none' are always available.  Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
+
+# By default, display warnings according to 'opt_warning_types'.  Set
+# 'warning_func'  to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
+
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
+
+
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
+
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
+
+
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
+{
+    $debug_cmd
+
+    test -t 1 && {
+      # COLORTERM and USE_ANSI_COLORS environment variables take
+      # precedence, because most terminfo databases neglect to describe
+      # whether color sequences are supported.
+      test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+      if test 1 = "$USE_ANSI_COLORS"; then
+        # Standard ANSI escape sequences
+        tc_reset=''
+        tc_bold='';   tc_standout=''
+        tc_red='';   tc_green=''
+        tc_blue='';  tc_cyan=''
+      else
+        # Otherwise trust the terminfo database after all.
+        test -n "`tput sgr0 2>/dev/null`" && {
+          tc_reset=`tput sgr0`
+          test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+          tc_standout=$tc_bold
+          test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+          test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+          test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+          test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+          test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+        }
+      fi
+    }
+
+    require_term_colors=:
+}
+
+
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
+
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
+
+
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
+
+  # We should try to minimise forks, especially on Windows where they are
+  # unreasonably slow, so skip the feature probes when bash or zsh are
+  # being used:
+  if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+    : ${_G_HAVE_ARITH_OP="yes"}
+    : ${_G_HAVE_XSI_OPS="yes"}
+    # The += operator was introduced in bash 3.1
+    case $BASH_VERSION in
+      [12].* | 3.0 | 3.0*) ;;
+      *)
+        : ${_G_HAVE_PLUSEQ_OP="yes"}
+        ;;
+    esac
+  fi
+
+  # _G_HAVE_PLUSEQ_OP
+  # Can be empty, in which case the shell is probed, "yes" if += is
+  # useable or anything else if it does not work.
+  test -z "$_G_HAVE_PLUSEQ_OP" \
+    && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+    && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_append ()
+  {
+    $debug_cmd
+
+    eval "$1+=\$2"
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_append ()
+  {
+    $debug_cmd
+
+    eval "$1=\$$1\$2"
+  }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+  eval 'func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_arg pretty "$2"
+    eval "$1+=\\ \$func_quote_arg_result"
+  }'
+else
+  func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_arg pretty "$2"
+    eval "$1=\$$1\\ \$func_quote_arg_result"
+  }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE.  For example:
+#
+#   func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
+{
+    $debug_cmd
+
+    eval _G_current_value='`$ECHO $'$1'`'
+    _G_delim=`expr "$2" : '\(.\)'`
+
+    case $_G_delim$_G_current_value$_G_delim in
+      *"$2$_G_delim"*) ;;
+      *) func_append "$@" ;;
+    esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+  test -z "$_G_HAVE_ARITH_OP" \
+    && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+    && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+  eval 'func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=$(( $* ))
+  }'
+else
+  func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=`expr "$@"`
+  }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  # If this shell supports suffix pattern removal, then use it to avoid
+  # forking. Hide the definitions single quotes in case the shell chokes
+  # on unsupported syntax...
+  _b='func_basename_result=${1##*/}'
+  _d='case $1 in
+        */*) func_dirname_result=${1%/*}$2 ;;
+        *  ) func_dirname_result=$3        ;;
+      esac'
+
+else
+  # ...otherwise fall back to using sed.
+  _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+  _d='func_dirname_result=`$ECHO "$1"  |$SED "$sed_dirname"`
+      if test "X$func_dirname_result" = "X$1"; then
+        func_dirname_result=$3
+      else
+        func_append func_dirname_result "$2"
+      fi'
+fi
+
+eval 'func_basename ()
+{
+    $debug_cmd
+
+    '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+eval 'func_dirname ()
+{
+    $debug_cmd
+
+    '"$_d"'
+}'
+
+
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
+{
+    $debug_cmd
+
+    '"$_b"'
+    '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+    $debug_cmd
+
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname: $_G_line"
+    done
+    IFS=$func_echo_IFS
+}
+
+
+# func_echo_all ARG...
+# --------------------
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    _G_infix=$1; shift
+    _G_indent=$_G_infix
+    _G_prefix="$progname: $_G_infix: "
+    _G_message=$*
+
+    # Strip color escape sequences before counting printable length
+    for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
+    do
+      test -n "$_G_tc" && {
+        _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+        _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+      }
+    done
+    _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`"  " ## exclude from sc_prohibit_nested_quotes
+
+    func_echo_infix_1_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_infix_1_IFS
+      $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+      _G_prefix=$_G_indent
+    done
+    IFS=$func_echo_infix_1_IFS
+}
+
+
+# func_error ARG...
+# -----------------
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    func_echo_infix_1 "  $tc_standout${tc_red}error$tc_reset" "$*" >&2
+}
+
+
+# func_fatal_error ARG...
+# -----------------------
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    $debug_cmd
+
+    func_error "$*"
+    exit $EXIT_FAILURE
+}
+
+
+# func_grep EXPRESSION FILENAME
+# -----------------------------
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $debug_cmd
+
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+  test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=${#1}
+  }'
+else
+  func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+  }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    $debug_cmd
+
+    _G_directory_path=$1
+    _G_dir_list=
+
+    if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
+
+      # Protect directory names starting with '-'
+      case $_G_directory_path in
+        -*) _G_directory_path=./$_G_directory_path ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$_G_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        _G_dir_list=$_G_directory_path:$_G_dir_list
+
+        # If the last portion added has no slash in it, the list is done
+        case $_G_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
+      done
+      _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
+
+      func_mkdir_p_IFS=$IFS; IFS=:
+      for _G_dir in $_G_dir_list; do
+	IFS=$func_mkdir_p_IFS
+        # mkdir can fail with a 'File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$_G_dir" 2>/dev/null || :
+      done
+      IFS=$func_mkdir_p_IFS
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$_G_directory_path" || \
+        func_fatal_error "Failed to create '$1'"
+    fi
+}
+
+
+# func_mktempdir [BASENAME]
+# -------------------------
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, BASENAME is the basename for that directory.
+func_mktempdir ()
+{
+    $debug_cmd
+
+    _G_template=${TMPDIR-/tmp}/${1-$progname}
+
+    if test : = "$opt_dry_run"; then
+      # Return a directory name, but don't create it in dry-run mode
+      _G_tmpdir=$_G_template-$$
+    else
+
+      # If mktemp works, use that first and foremost
+      _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$_G_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        _G_tmpdir=$_G_template-${RANDOM-0}$$
+
+        func_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$_G_tmpdir"
+        umask $func_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$_G_tmpdir" || \
+        func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
+    fi
+
+    $ECHO "$_G_tmpdir"
+}
+
+
+# func_normal_abspath PATH
+# ------------------------
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+func_normal_abspath ()
+{
+    $debug_cmd
+
+    # These SED scripts presuppose an absolute path with a trailing slash.
+    _G_pathcar='s|^/\([^/]*\).*$|\1|'
+    _G_pathcdr='s|^/[^/]*||'
+    _G_removedotparts=':dotsl
+		s|/\./|/|g
+		t dotsl
+		s|/\.$|/|'
+    _G_collapseslashes='s|/\{1,\}|/|g'
+    _G_finalslash='s|/*$|/|'
+
+    # Start from root dir and reassemble the path.
+    func_normal_abspath_result=
+    func_normal_abspath_tpath=$1
+    func_normal_abspath_altnamespace=
+    case $func_normal_abspath_tpath in
+      "")
+        # Empty path, that just means $cwd.
+        func_stripname '' '/' "`pwd`"
+        func_normal_abspath_result=$func_stripname_result
+        return
+        ;;
+      # The next three entries are used to spot a run of precisely
+      # two leading slashes without using negated character classes;
+      # we take advantage of case's first-match behaviour.
+      ///*)
+        # Unusual form of absolute path, do nothing.
+        ;;
+      //*)
+        # Not necessarily an ordinary path; POSIX reserves leading '//'
+        # and for example Cygwin uses it to access remote file shares
+        # over CIFS/SMB, so we conserve a leading double slash if found.
+        func_normal_abspath_altnamespace=/
+        ;;
+      /*)
+        # Absolute path, do nothing.
+        ;;
+      *)
+        # Relative path, prepend $cwd.
+        func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+        ;;
+    esac
+
+    # Cancel out all the simple stuff to save iterations.  We also want
+    # the path to end with a slash for ease of parsing, so make sure
+    # there is one (and only one) here.
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+    while :; do
+      # Processed it all yet?
+      if test / = "$func_normal_abspath_tpath"; then
+        # If we ascended to the root using ".." the result may be empty now.
+        if test -z "$func_normal_abspath_result"; then
+          func_normal_abspath_result=/
+        fi
+        break
+      fi
+      func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcar"`
+      func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcdr"`
+      # Figure out what to do with it
+      case $func_normal_abspath_tcomponent in
+        "")
+          # Trailing empty path component, ignore it.
+          ;;
+        ..)
+          # Parent dir; strip last assembled component from result.
+          func_dirname "$func_normal_abspath_result"
+          func_normal_abspath_result=$func_dirname_result
+          ;;
+        *)
+          # Actual path component, append it.
+          func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
+          ;;
+      esac
+    done
+    # Restore leading double-slash if one was found on entry.
+    func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
+{
+    $debug_cmd
+
+    $opt_quiet || func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
+{
+    $debug_cmd
+
+    func_relative_path_result=
+    func_normal_abspath "$1"
+    func_relative_path_tlibdir=$func_normal_abspath_result
+    func_normal_abspath "$2"
+    func_relative_path_tbindir=$func_normal_abspath_result
+
+    # Ascend the tree starting from libdir
+    while :; do
+      # check if we have found a prefix of bindir
+      case $func_relative_path_tbindir in
+        $func_relative_path_tlibdir)
+          # found an exact match
+          func_relative_path_tcancelled=
+          break
+          ;;
+        $func_relative_path_tlibdir*)
+          # found a matching prefix
+          func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+          func_relative_path_tcancelled=$func_stripname_result
+          if test -z "$func_relative_path_result"; then
+            func_relative_path_result=.
+          fi
+          break
+          ;;
+        *)
+          func_dirname $func_relative_path_tlibdir
+          func_relative_path_tlibdir=$func_dirname_result
+          if test -z "$func_relative_path_tlibdir"; then
+            # Have to descend all the way to the root!
+            func_relative_path_result=../$func_relative_path_result
+            func_relative_path_tcancelled=$func_relative_path_tbindir
+            break
+          fi
+          func_relative_path_result=../$func_relative_path_result
+          ;;
+      esac
+    done
+
+    # Now calculate path; take care to avoid doubling-up slashes.
+    func_stripname '' '/' "$func_relative_path_result"
+    func_relative_path_result=$func_stripname_result
+    func_stripname '/' '/' "$func_relative_path_tcancelled"
+    if test -n "$func_stripname_result"; then
+      func_append func_relative_path_result "/$func_stripname_result"
+    fi
+
+    # Normalisation. If bindir is libdir, return '.' else relative path.
+    if test -n "$func_relative_path_result"; then
+      func_stripname './' '' "$func_relative_path_result"
+      func_relative_path_result=$func_stripname_result
+    fi
+
+    test -n "$func_relative_path_result" || func_relative_path_result=.
+
+    :
+}
+
+
+# func_quote_portable EVAL ARG
+# ----------------------------
+# Internal function to portably implement func_quote_arg.  Note that we still
+# keep attention to performance here so we as much as possible try to avoid
+# calling sed binary (so far O(N) complexity as long as func_append is O(1)).
+func_quote_portable ()
+{
+    $debug_cmd
+
+    $require_check_ifs_backslash
+
+    func_quote_portable_result=$2
+
+    # one-time-loop (easy break)
+    while true
+    do
+      if $1; then
+        func_quote_portable_result=`$ECHO "$2" | $SED \
+          -e "$sed_double_quote_subst" -e "$sed_double_backslash"`
+        break
+      fi
+
+      # Quote for eval.
+      case $func_quote_portable_result in
+        *[\\\`\"\$]*)
+          # Fallback to sed for $func_check_bs_ifs_broken=:, or when the string
+          # contains the shell wildcard characters.
+          case $check_ifs_backshlash_broken$func_quote_portable_result in
+            :*|*[\[\*\?]*)
+              func_quote_portable_result=`$ECHO "$func_quote_portable_result" \
+                  | $SED "$sed_quote_subst"`
+              break
+              ;;
+          esac
+
+          func_quote_portable_old_IFS=$IFS
+          for _G_char in '\' '`' '"' '$'
+          do
+            # STATE($1) PREV($2) SEPARATOR($3)
+            set start "" ""
+            func_quote_portable_result=dummy"$_G_char$func_quote_portable_result$_G_char"dummy
+            IFS=$_G_char
+            for _G_part in $func_quote_portable_result
+            do
+              case $1 in
+              quote)
+                func_append func_quote_portable_result "$3$2"
+                set quote "$_G_part" "\\$_G_char"
+                ;;
+              start)
+                set first "" ""
+                func_quote_portable_result=
+                ;;
+              first)
+                set quote "$_G_part" ""
+                ;;
+              esac
+            done
+          done
+          IFS=$func_quote_portable_old_IFS
+          ;;
+        *) ;;
+      esac
+      break
+    done
+
+    func_quote_portable_unquoted_result=$func_quote_portable_result
+    case $func_quote_portable_result in
+      # double-quote args containing shell metacharacters to delay
+      # word splitting, command substitution and variable expansion
+      # for a subsequent eval.
+      # many bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        func_quote_portable_result=\"$func_quote_portable_result\"
+        ;;
+    esac
+}
+
+
+# func_quotefast_eval ARG
+# -----------------------
+# Quote one ARG (internal).  This is equivalent to 'func_quote_arg eval ARG',
+# but optimized for speed.  Result is stored in $func_quotefast_eval.
+if test xyes = `(x=; printf -v x %q yes; echo x"$x") 2>/dev/null`; then
+  printf -v _GL_test_printf_tilde %q '~'
+  if test '\~' = "$_GL_test_printf_tilde"; then
+    func_quotefast_eval ()
+    {
+      printf -v func_quotefast_eval_result %q "$1"
+    }
+  else
+    # Broken older Bash implementations.  Make those faster too if possible.
+    func_quotefast_eval ()
+    {
+      case $1 in
+        '~'*)
+          func_quote_portable false "$1"
+          func_quotefast_eval_result=$func_quote_portable_result
+          ;;
+        *)
+          printf -v func_quotefast_eval_result %q "$1"
+          ;;
+      esac
+    }
+  fi
+else
+  func_quotefast_eval ()
+  {
+    func_quote_portable false "$1"
+    func_quotefast_eval_result=$func_quote_portable_result
+  }
+fi
+
+
+# func_quote_arg MODEs ARG
+# ------------------------
+# Quote one ARG to be evaled later.  MODEs argument may contain zero or more
+# specifiers listed below separated by ',' character.  This function returns two
+# values:
+#   i) func_quote_arg_result
+#      double-quoted (when needed), suitable for a subsequent eval
+#  ii) func_quote_arg_unquoted_result
+#      has all characters that are still active within double
+#      quotes backslashified.  Available only if 'unquoted' is specified.
+#
+# Available modes:
+# ----------------
+# 'eval' (default)
+#       - escape shell special characters
+# 'expand'
+#       - the same as 'eval';  but do not quote variable references
+# 'pretty'
+#       - request aesthetic output, i.e. '"a b"' instead of 'a\ b'.  This might
+#         be used later in func_quote to get output like: 'echo "a b"' instead
+#         of 'echo a\ b'.  This is slower than default on some shells.
+# 'unquoted'
+#       - produce also $func_quote_arg_unquoted_result which does not contain
+#         wrapping double-quotes.
+#
+# Examples for 'func_quote_arg pretty,unquoted string':
+#
+#   string      | *_result              | *_unquoted_result
+#   ------------+-----------------------+-------------------
+#   "           | \"                    | \"
+#   a b         | "a b"                 | a b
+#   "a b"       | "\"a b\""             | \"a b\"
+#   *           | "*"                   | *
+#   z="${x-$y}" | "z=\"\${x-\$y}\""     | z=\"\${x-\$y}\"
+#
+# Examples for 'func_quote_arg pretty,unquoted,expand string':
+#
+#   string        |   *_result          |  *_unquoted_result
+#   --------------+---------------------+--------------------
+#   z="${x-$y}"   | "z=\"${x-$y}\""     | z=\"${x-$y}\"
+func_quote_arg ()
+{
+    _G_quote_expand=false
+    case ,$1, in
+      *,expand,*)
+        _G_quote_expand=:
+        ;;
+    esac
+
+    case ,$1, in
+      *,pretty,*|*,expand,*|*,unquoted,*)
+        func_quote_portable $_G_quote_expand "$2"
+        func_quote_arg_result=$func_quote_portable_result
+        func_quote_arg_unquoted_result=$func_quote_portable_unquoted_result
+        ;;
+      *)
+        # Faster quote-for-eval for some shells.
+        func_quotefast_eval "$2"
+        func_quote_arg_result=$func_quotefast_eval_result
+        ;;
+    esac
+}
+
+
+# func_quote MODEs ARGs...
+# ------------------------
+# Quote all ARGs to be evaled later and join them into single command.  See
+# func_quote_arg's description for more info.
+func_quote ()
+{
+    $debug_cmd
+    _G_func_quote_mode=$1 ; shift
+    func_quote_result=
+    while test 0 -lt $#; do
+      func_quote_arg "$_G_func_quote_mode" "$1"
+      if test -n "$func_quote_result"; then
+        func_append func_quote_result " $func_quote_arg_result"
+      else
+        func_append func_quote_result "$func_quote_arg_result"
+      fi
+      shift
+    done
+}
+
+
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_stripname ()
+  {
+    $debug_cmd
+
+    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+    # positional parameters, so assign one to ordinary variable first.
+    func_stripname_result=$3
+    func_stripname_result=${func_stripname_result#"$1"}
+    func_stripname_result=${func_stripname_result%"$2"}
+  }'
+else
+  func_stripname ()
+  {
+    $debug_cmd
+
+    case $2 in
+      .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
+      *)  func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
+    esac
+  }
+fi
+
+
+# func_show_eval CMD [FAIL_EXP]
+# -----------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+    $debug_cmd
+
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
+
+    func_quote_arg pretty,expand "$_G_cmd"
+    eval "func_notquiet $func_quote_arg_result"
+
+    $opt_dry_run || {
+      eval "$_G_cmd"
+      _G_status=$?
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
+      fi
+    }
+}
+
+
+# func_show_eval_locale CMD [FAIL_EXP]
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+    $debug_cmd
+
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
+
+    $opt_quiet || {
+      func_quote_arg expand,pretty "$_G_cmd"
+      eval "func_echo $func_quote_arg_result"
+    }
+
+    $opt_dry_run || {
+      eval "$_G_user_locale
+	    $_G_cmd"
+      _G_status=$?
+      eval "$_G_safe_locale"
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
+      fi
+    }
+}
+
+
+# func_tr_sh
+# ----------
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result.  All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+    $debug_cmd
+
+    case $1 in
+    [0-9]* | *[!a-zA-Z0-9_]*)
+      func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
+      ;;
+    * )
+      func_tr_sh_result=$1
+      ;;
+    esac
+}
+
+
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $debug_cmd
+
+    $opt_verbose && func_echo "$*"
+
+    :
+}
+
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
+}
+
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+    $debug_cmd
+
+    # CATEGORY must be in the warning_categories list!
+    case " $warning_categories " in
+      *" $1 "*) ;;
+      *) func_internal_error "invalid warning category '$1'" ;;
+    esac
+
+    _G_category=$1
+    shift
+
+    case " $opt_warning_types " in
+      *" $_G_category "*) $warning_func ${1+"$@"} ;;
+    esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+    $debug_cmd
+
+    printf '%s\n%s\n' "$1" "$2" \
+      | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false.  Use it like this:
+#
+#  func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+    $debug_cmd
+
+    test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# This is free software.  There is NO warranty; not even for
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# Copyright (C) 2010-2019, 2021 Bootstrap Authors
+#
+# This file is dual licensed under the terms of the MIT license
+# <https://opensource.org/license/MIT>, and GPL version 2 or later
+# <http://www.gnu.org/licenses/gpl-2.0.html>.  You must apply one of
+# these licenses when using or redistributing this software or any of
+# the files within it.  See the URLs above, or the file `LICENSE`
+# included in the Bootstrap distribution for the full license texts.
+
+# Please report bugs or propose patches to:
+# <https://github.com/gnulib-modules/bootstrap/issues>
+
+# Set a version string for this script.
+scriptversion=2019-02-19.15; # UTC
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+#   #!/bin/sh
+#   . relative/path/to/funclib.sh
+#   . relative/path/to/options-parser
+#   scriptversion=1.0
+#   func_options ${1+"$@"}
+#   eval set dummy "$func_options_result"; shift
+#   ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# Copyright'.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug in processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath [OPTION]...'
+
+# Short help message in response to '-h' and '--help'.  Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+       --debug        enable verbose shell tracing
+   -W, --warnings=CATEGORY
+                      report the warnings falling in CATEGORY [all]
+   -v, --verbose      verbosely report processing
+       --version      print version information and exit
+   -h, --help         print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+       'all'          show all warnings
+       'none'         turn off all the warnings
+       'error'        warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# in the main code.  A hook is just a list of function names that can be
+# run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+    $debug_cmd
+
+    func_append hookable_fns " $1"
+}
+
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns.  FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+    $debug_cmd
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not accept hook functions." ;;
+    esac
+
+    eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of hook functions to be called by
+# FUNC_NAME.
+func_remove_hook ()
+{
+    $debug_cmd
+
+    eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_propagate_result FUNC_NAME_A FUNC_NAME_B
+# ---------------------------------------------
+# If the *_result variable of FUNC_NAME_A _is set_, assign its value to
+# *_result variable of FUNC_NAME_B.
+func_propagate_result ()
+{
+    $debug_cmd
+
+    func_propagate_result_result=:
+    if eval "test \"\${${1}_result+set}\" = set"
+    then
+      eval "${2}_result=\$${1}_result"
+    else
+      func_propagate_result_result=false
+    fi
+}
+
+
+# func_run_hooks FUNC_NAME [ARG]...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It's assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+    $debug_cmd
+
+    _G_rc_run_hooks=false
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not support hook functions." ;;
+    esac
+
+    eval _G_hook_fns=\$$1_hooks; shift
+
+    for _G_hook in $_G_hook_fns; do
+      func_unset "${_G_hook}_result"
+      eval $_G_hook '${1+"$@"}'
+      func_propagate_result $_G_hook func_run_hooks
+      if $func_propagate_result_result; then
+        eval set dummy "$func_run_hooks_result"; shift
+      fi
+    done
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list from your hook function.  You may remove
+# or edit any options that you action, and then pass back the remaining
+# unprocessed options in '<hooked_function_name>_result', escaped
+# suitably for 'eval'.
+#
+# The '<hooked_function_name>_result' variable is automatically unset
+# before your hook gets called; for best performance, only set the
+# *_result variable when necessary (i.e. don't call the 'func_quote'
+# function unnecessarily because it can be an expensive operation on some
+# machines).
+#
+# Like this:
+#
+#    my_options_prep ()
+#    {
+#        $debug_cmd
+#
+#        # Extend the existing usage message.
+#        usage_message=$usage_message'
+#      -s, --silent       don'\''t print informational messages
+#    '
+#        # No change in '$@' (ignored completely by this hook).  Leave
+#        # my_options_prep_result variable intact.
+#    }
+#    func_add_hook func_options_prep my_options_prep
+#
+#
+#    my_silent_option ()
+#    {
+#        $debug_cmd
+#
+#        args_changed=false
+#
+#        # Note that, for efficiency, we parse as many options as we can
+#        # recognise in a loop before passing the remainder back to the
+#        # caller on the first unrecognised argument we encounter.
+#        while test $# -gt 0; do
+#          opt=$1; shift
+#          case $opt in
+#            --silent|-s) opt_silent=:
+#                         args_changed=:
+#                         ;;
+#            # Separate non-argument short options:
+#            -s*)         func_split_short_opt "$_G_opt"
+#                         set dummy "$func_split_short_opt_name" \
+#                             "-$func_split_short_opt_arg" ${1+"$@"}
+#                         shift
+#                         args_changed=:
+#                         ;;
+#            *)           # Make sure the first unrecognised option "$_G_opt"
+#                         # is added back to "$@" in case we need it later,
+#                         # if $args_changed was set to 'true'.
+#                         set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+#          esac
+#        done
+#
+#        # Only call 'func_quote' here if we processed at least one argument.
+#        if $args_changed; then
+#          func_quote eval ${1+"$@"}
+#          my_silent_option_result=$func_quote_result
+#        fi
+#    }
+#    func_add_hook func_parse_options my_silent_option
+#
+#
+#    my_option_validation ()
+#    {
+#        $debug_cmd
+#
+#        $opt_silent && $opt_verbose && func_fatal_help "\
+#    '--silent' and '--verbose' options are mutually exclusive."
+#    }
+#    func_add_hook func_validate_options my_option_validation
+#
+# You'll also need to manually amend $usage_message to reflect the extra
+# options you parse.  It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options_finish [ARG]...
+# ----------------------------
+# Finishing the option parse loop (call 'func_options' hooks ATM).
+func_options_finish ()
+{
+    $debug_cmd
+
+    func_run_hooks func_options ${1+"$@"}
+    func_propagate_result func_run_hooks func_options_finish
+}
+
+
+# func_options [ARG]...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+    $debug_cmd
+
+    _G_options_quoted=false
+
+    for my_func in options_prep parse_options validate_options options_finish
+    do
+      func_unset func_${my_func}_result
+      func_unset func_run_hooks_result
+      eval func_$my_func '${1+"$@"}'
+      func_propagate_result func_$my_func func_options
+      if $func_propagate_result_result; then
+        eval set dummy "$func_options_result"; shift
+        _G_options_quoted=:
+      fi
+    done
+
+    $_G_options_quoted || {
+      # As we (func_options) are top-level options-parser function and
+      # nobody quoted "$@" for us yet, we need to do it explicitly for
+      # caller.
+      func_quote eval ${1+"$@"}
+      func_options_result=$func_quote_result
+    }
+}
+
+
+# func_options_prep [ARG]...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters.  If a hook function modifies that list, and
+# needs to propagate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before returning.
+func_hookable func_options_prep
+func_options_prep ()
+{
+    $debug_cmd
+
+    # Option defaults:
+    opt_verbose=false
+    opt_warning_types=
+
+    func_run_hooks func_options_prep ${1+"$@"}
+    func_propagate_result func_run_hooks func_options_prep
+}
+
+
+# func_parse_options [ARG]...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
+{
+    $debug_cmd
+
+    _G_parse_options_requote=false
+    # this just eases exit handling
+    while test $# -gt 0; do
+      # Defer to hook functions for initial option parsing, so they
+      # get priority in the event of reusing an option name.
+      func_run_hooks func_parse_options ${1+"$@"}
+      func_propagate_result func_run_hooks func_parse_options
+      if $func_propagate_result_result; then
+        eval set dummy "$func_parse_options_result"; shift
+        # Even though we may have changed "$@", we passed the "$@" array
+        # down into the hook and it quoted it for us (because we are in
+        # this if-branch).  No need to quote it again.
+        _G_parse_options_requote=false
+      fi
+
+      # Break out of the loop if we already parsed every option.
+      test $# -gt 0 || break
+
+      # We expect that one of the options parsed in this function matches
+      # and thus we remove _G_opt from "$@" and need to re-quote.
+      _G_match_parse_options=:
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --debug|-x)   debug_cmd='set -x'
+                      func_echo "enabling shell trace mode" >&2
+                      $debug_cmd
+                      ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                      set dummy --warnings none ${1+"$@"}
+                      shift
+		      ;;
+
+        --warnings|--warning|-W)
+                      if test $# = 0 && func_missing_arg $_G_opt; then
+                        _G_parse_options_requote=:
+                        break
+                      fi
+                      case " $warning_categories $1" in
+                        *" $1 "*)
+                          # trailing space prevents matching last $1 above
+                          func_append_uniq opt_warning_types " $1"
+                          ;;
+                        *all)
+                          opt_warning_types=$warning_categories
+                          ;;
+                        *none)
+                          opt_warning_types=none
+                          warning_func=:
+                          ;;
+                        *error)
+                          opt_warning_types=$warning_categories
+                          warning_func=func_fatal_error
+                          ;;
+                        *)
+                          func_fatal_error \
+                             "unsupported warning category: '$1'"
+                          ;;
+                      esac
+                      shift
+                      ;;
+
+        --verbose|-v) opt_verbose=: ;;
+        --version)    func_version ;;
+        -\?|-h)       func_usage ;;
+        --help)       func_help ;;
+
+	# Separate optargs to long options (plugins may need this):
+	--*=*)        func_split_equals "$_G_opt"
+	              set dummy "$func_split_equals_lhs" \
+                          "$func_split_equals_rhs" ${1+"$@"}
+                      shift
+                      ;;
+
+       # Separate optargs to short options:
+        -W*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        # Separate non-argument short options:
+        -\?*|-h*|-v*|-x*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "-$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        --)           _G_parse_options_requote=: ; break ;;
+        -*)           func_fatal_help "unrecognised option: '$_G_opt'" ;;
+        *)            set dummy "$_G_opt" ${1+"$@"}; shift
+                      _G_match_parse_options=false
+                      break
+                      ;;
+      esac
+
+      if $_G_match_parse_options; then
+        _G_parse_options_requote=:
+      fi
+    done
+
+    if $_G_parse_options_requote; then
+      # save modified positional parameters for caller
+      func_quote eval ${1+"$@"}
+      func_parse_options_result=$func_quote_result
+    fi
+}
+
+
+# func_validate_options [ARG]...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
+{
+    $debug_cmd
+
+    # Display all warnings if -W was not given.
+    test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
+
+    func_run_hooks func_validate_options ${1+"$@"}
+    func_propagate_result func_run_hooks func_validate_options
+
+    # Bail if the options were screwed!
+    $exit_cmd $EXIT_FAILURE
+}
+
+
+
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
+
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    $debug_cmd
+
+    eval \$ECHO \""Usage: $usage"\"
+    eval \$ECHO \""$fatal_help"\"
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
+func_help ()
+{
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "$long_help_message"
+    exit 0
+}
+
+
+# func_missing_arg ARGNAME
+# ------------------------
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    $debug_cmd
+
+    func_error "Missing argument for '$1'."
+    exit_cmd=exit
+}
+
+
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables
+# after splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=${1%%=*}
+      func_split_equals_rhs=${1#*=}
+      if test "x$func_split_equals_lhs" = "x$1"; then
+        func_split_equals_rhs=
+      fi
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
+      func_split_equals_rhs=
+      test "x$func_split_equals_lhs=" = "x$1" \
+        || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
+  }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_arg=${1#??}
+      func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_name=`expr "x$1" : 'x\(-.\)'`
+      func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
+  }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+    exit 0
+}
+
+
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
+{
+    $debug_cmd
+
+    eval \$ECHO \""Usage: $usage"\"
+    echo
+    $SED -n 's|^# ||
+        /^Written by/{
+          x;p;x
+        }
+	h
+	/^Written by/q' < "$progpath"
+    echo
+    eval \$ECHO \""$usage_message"\"
+}
+
+
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+# The version message is extracted from the calling file's header
+# comments, with leading '# ' stripped:
+#   1. First display the progname and version
+#   2. Followed by the header comment line matching  /^# Written by /
+#   3. Then a blank line followed by the first following line matching
+#      /^# Copyright /
+#   4. Immediately followed by any lines between the previous matches,
+#      except lines preceding the intervening completely blank line.
+# For example, see the header comments of this file.
+func_version ()
+{
+    $debug_cmd
+
+    printf '%s\n' "$progname $scriptversion"
+    $SED -n '
+        /^# Written by /!b
+        s|^# ||; p; n
+
+        :fwd2blnk
+        /./ {
+          n
+          b fwd2blnk
+        }
+        p; n
+
+        :holdwrnt
+        s|^# ||
+        s|^# *$||
+        /^Copyright /!{
+          /./H
+          n
+          b holdwrnt
+        }
+
+        s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
+        G
+        s|\(\n\)\n*|\1|g
+        p; q' < "$progpath"
+
+    exit $?
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "30/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.7'
+
+
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
+{
+    $debug_cmd
+
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+    done
+    IFS=$func_echo_IFS
+}
+
+
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
+{
+    $debug_cmd
+
+    $warning_func ${1+"$@"}
+}
+
+
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath [OPTION]... [MODE-ARG]...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+       --config             show all configuration variables
+       --debug              enable verbose shell tracing
+   -n, --dry-run            display commands without modifying any files
+       --features           display basic configuration information and exit
+       --mode=MODE          use operation mode MODE
+       --no-warnings        equivalent to '-Wnone'
+       --preserve-dup-deps  don't remove duplicate dependency libraries
+       --quiet, --silent    don't print informational messages
+       --tag=TAG            use configuration variables from tag TAG
+   -v, --verbose            print more informational messages than default
+       --version            print version information
+   -W, --warnings=CATEGORY  report the warnings falling in CATEGORY [all]
+   -h, --help, --help-all   print short, long, or detailed help message
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
+{
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "$long_help_message
+
+MODE must be one of the following:
+
+       clean           remove files from the build directory
+       compile         compile a source file into a libtool object
+       execute         automatically set library path, then run a program
+       finish          complete the installation of libtool libraries
+       install         install libraries or executables
+       link            create a library or an executable
+       uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+       host-triplet:   $host
+       shell:          $SHELL
+       compiler:       $LTCC
+       compiler flags: $LTCFLAGS
+       linker:         $LD (gnu? $with_gnu_ld)
+       version:        $progname $scriptversion Debian-2.4.7-5
+       automake:       `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+       autoconf:       `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU libtool home page: <http://www.gnu.org/s/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+    exit 0
+}
+
+
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_lo2o ()
+  {
+    case $1 in
+      *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+      *   ) func_lo2o_result=$1               ;;
+    esac
+  }'
+
+  # func_xform LIBOBJ-OR-SOURCE
+  # ---------------------------
+  # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+  # suffix to a '.lo' libtool-object suffix.
+  eval 'func_xform ()
+  {
+    func_xform_result=${1%.*}.lo
+  }'
+else
+  # ...otherwise fall back to using sed.
+  func_lo2o ()
+  {
+    func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+  }
+
+  func_xform ()
+  {
+    func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
+  }
+fi
+
+
+# func_fatal_configuration ARG...
+# -------------------------------
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+    func_fatal_error ${1+"$@"} \
+      "See the $PACKAGE documentation for more information." \
+      "Fatal configuration error."
+}
+
+
+# func_config
+# -----------
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
+
+    # Default configuration.
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+    done
+
+    exit $?
+}
+
+
+# func_features
+# -------------
+# Display the features supported by this script.
+func_features ()
+{
+    echo "host: $host"
+    if test yes = "$build_libtool_libs"; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test yes = "$build_old_libs"; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+
+    exit $?
+}
+
+
+# func_enable_tag TAGNAME
+# -----------------------
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+    # Global variable:
+    tagname=$1
+
+    re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+    re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+    sed_extractcf=/$re_begincf/,/$re_endcf/p
+
+    # Validate tagname.
+    case $tagname in
+      *[!-_A-Za-z0-9,/]*)
+        func_fatal_error "invalid tag name: $tagname"
+        ;;
+    esac
+
+    # Don't test for the "default" C tag, as we know it's
+    # there but not specially marked.
+    case $tagname in
+        CC) ;;
+    *)
+        if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	  taglist="$taglist $tagname"
+
+	  # Evaluate the configuration.  Be careful to quote the path
+	  # and the sed script, to avoid splitting on whitespace, but
+	  # also don't use non-portable quotes within backquotes within
+	  # quotes we have to do it in 2 steps:
+	  extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	  eval "$extractedcf"
+        else
+	  func_error "ignoring unknown tag $tagname"
+        fi
+        ;;
+    esac
+}
+
+
+# func_check_version_match
+# ------------------------
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+    if test "$package_revision" != "$macro_revision"; then
+      if test "$VERSION" != "$macro_version"; then
+        if test -z "$macro_version"; then
+          cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+        else
+          cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+        fi
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+      fi
+
+      exit $EXIT_MISMATCH
+    fi
+}
+
+
+# libtool_options_prep [ARG]...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
+{
+    $debug_mode
+
+    # Option defaults:
+    opt_config=false
+    opt_dlopen=
+    opt_dry_run=false
+    opt_help=false
+    opt_mode=
+    opt_preserve_dup_deps=false
+    opt_quiet=false
+
+    nonopt=
+    preserve_args=
+
+    _G_rc_lt_options_prep=:
+
+    _G_rc_lt_options_prep=:
+
+    # Shorthand for --mode=foo, only valid as the first argument
+    case $1 in
+    clean|clea|cle|cl)
+      shift; set dummy --mode clean ${1+"$@"}; shift
+      ;;
+    compile|compil|compi|comp|com|co|c)
+      shift; set dummy --mode compile ${1+"$@"}; shift
+      ;;
+    execute|execut|execu|exec|exe|ex|e)
+      shift; set dummy --mode execute ${1+"$@"}; shift
+      ;;
+    finish|finis|fini|fin|fi|f)
+      shift; set dummy --mode finish ${1+"$@"}; shift
+      ;;
+    install|instal|insta|inst|ins|in|i)
+      shift; set dummy --mode install ${1+"$@"}; shift
+      ;;
+    link|lin|li|l)
+      shift; set dummy --mode link ${1+"$@"}; shift
+      ;;
+    uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+      shift; set dummy --mode uninstall ${1+"$@"}; shift
+      ;;
+    *)
+      _G_rc_lt_options_prep=false
+      ;;
+    esac
+
+    if $_G_rc_lt_options_prep; then
+      # Pass back the list of options.
+      func_quote eval ${1+"$@"}
+      libtool_options_prep_result=$func_quote_result
+    fi
+}
+func_add_hook func_options_prep libtool_options_prep
+
+
+# libtool_parse_options [ARG]...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
+{
+    $debug_cmd
+
+    _G_rc_lt_parse_options=false
+
+    # Perform our own loop to consume as many options as possible in
+    # each iteration.
+    while test $# -gt 0; do
+      _G_match_lt_parse_options=:
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --dry-run|--dryrun|-n)
+                        opt_dry_run=:
+                        ;;
+
+        --config)       func_config ;;
+
+        --dlopen|-dlopen)
+                        opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+                        shift
+                        ;;
+
+        --preserve-dup-deps)
+                        opt_preserve_dup_deps=: ;;
+
+        --features)     func_features ;;
+
+        --finish)       set dummy --mode finish ${1+"$@"}; shift ;;
+
+        --help)         opt_help=: ;;
+
+        --help-all)     opt_help=': help-all' ;;
+
+        --mode)         test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_mode=$1
+                        case $1 in
+                          # Valid mode arguments:
+                          clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+                          # Catch anything else as an error
+                          *) func_error "invalid argument for $_G_opt"
+                             exit_cmd=exit
+                             break
+                             ;;
+                        esac
+                        shift
+                        ;;
+
+        --no-silent|--no-quiet)
+                        opt_quiet=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                        opt_warning=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-verbose)
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --silent|--quiet)
+                        opt_quiet=:
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --tag)          test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_tag=$1
+                        func_append preserve_args " $_G_opt $1"
+                        func_enable_tag "$1"
+                        shift
+                        ;;
+
+        --verbose|-v)   opt_quiet=false
+                        opt_verbose=:
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        # An option not handled by this hook function:
+        *)              set dummy "$_G_opt" ${1+"$@"} ; shift
+                        _G_match_lt_parse_options=false
+                        break
+                        ;;
+      esac
+      $_G_match_lt_parse_options && _G_rc_lt_parse_options=:
+    done
+
+    if $_G_rc_lt_parse_options; then
+      # save modified positional parameters for caller
+      func_quote eval ${1+"$@"}
+      libtool_parse_options_result=$func_quote_result
+    fi
+}
+func_add_hook func_parse_options libtool_parse_options
+
+
+
+# libtool_validate_options [ARG]...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+    # save first non-option argument
+    if test 0 -lt $#; then
+      nonopt=$1
+      shift
+    fi
+
+    # preserve --debug
+    test : = "$debug_cmd" || func_append preserve_args " --debug"
+
+    case $host in
+      # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+      # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+      *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+        # don't eliminate duplications in $postdeps and $predeps
+        opt_duplicate_compiler_generated_deps=:
+        ;;
+      *)
+        opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+        ;;
+    esac
+
+    $opt_help || {
+      # Sanity checks first:
+      func_check_version_match
+
+      test yes != "$build_libtool_libs" \
+        && test yes != "$build_old_libs" \
+        && func_fatal_configuration "not configured to build any kind of library"
+
+      # Darwin sucks
+      eval std_shrext=\"$shrext_cmds\"
+
+      # Only execute mode is allowed to have -dlopen flags.
+      if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+        func_error "unrecognized option '-dlopen'"
+        $ECHO "$help" 1>&2
+        exit $EXIT_FAILURE
+      fi
+
+      # Change the help message to a mode-specific one.
+      generic_help=$help
+      help="Try '$progname --help --mode=$opt_mode' for more information."
+    }
+
+    # Pass back the unparsed argument list
+    func_quote eval ${1+"$@"}
+    libtool_validate_options_result=$func_quote_result
+}
+func_add_hook func_validate_options libtool_validate_options
+
+
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
+
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+  $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_p file
+# True iff FILE is a libtool '.la' library or '.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool '.la' library or '.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if 'file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case $lalib_p_line in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+    fi
+    test yes = "$lalib_p"
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    test -f "$1" &&
+      $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_dirname_and_basename "$1" "" "."
+    func_stripname '' '.exe' "$func_basename_result"
+    func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $debug_cmd
+
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$sp$nl
+      eval cmd=\"$cmd\"
+      IFS=$save_ifs
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# 'FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $debug_cmd
+
+    case $1 in
+    */* | *\\*)	. "$1" ;;
+    *)		. "./$1" ;;
+    esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot.  Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+  func_resolve_sysroot_result=$1
+  case $func_resolve_sysroot_result in
+  =*)
+    func_stripname '=' '' "$func_resolve_sysroot_result"
+    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+    ;;
+  esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+  case $lt_sysroot:$1 in
+  ?*:"$lt_sysroot"*)
+    func_stripname "$lt_sysroot" '' "$1"
+    func_replace_sysroot_result='='$func_stripname_result
+    ;;
+  *)
+    # Including no sysroot.
+    func_replace_sysroot_result=$1
+    ;;
+  esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    $debug_cmd
+
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	func_append_quoted CC_quoted "$arg"
+      done
+      CC_expanded=`func_echo_all $CC`
+      CC_quoted_expanded=`func_echo_all $CC_quoted`
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	      # Double-quote args containing other shell metacharacters.
+	      func_append_quoted CC_quoted "$arg"
+	    done
+	    CC_expanded=`func_echo_all $CC`
+	    CC_quoted_expanded=`func_echo_all $CC_quoted`
+	    case "$@ " in
+	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with '--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+    write_libobj=$1
+    if test yes = "$build_libtool_libs"; then
+      write_lobj=\'$2\'
+    else
+      write_lobj=none
+    fi
+
+    if test yes = "$build_old_libs"; then
+      write_oldobj=\'$3\'
+    else
+      write_oldobj=none
+    fi
+
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+      $MV "${write_libobj}T" "$write_libobj"
+    }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+  $debug_cmd
+
+  func_convert_core_file_wine_to_w32_result=$1
+  if test -n "$1"; then
+    # Unfortunately, winepath does not exit with a non-zero error code, so we
+    # are forced to check the contents of stdout. On the other hand, if the
+    # command is not found, the shell will set an exit code of 127 and print
+    # *an error message* to stdout. So we must check for both error code of
+    # zero AND non-empty stdout, which explains the odd construction:
+    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+    if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
+      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+        $SED -e "$sed_naive_backslashify"`
+    else
+      func_convert_core_file_wine_to_w32_result=
+    fi
+  fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+  $debug_cmd
+
+  # unfortunately, winepath doesn't convert paths, only file names
+  func_convert_core_path_wine_to_w32_result=
+  if test -n "$1"; then
+    oldIFS=$IFS
+    IFS=:
+    for func_convert_core_path_wine_to_w32_f in $1; do
+      IFS=$oldIFS
+      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+      if test -n "$func_convert_core_file_wine_to_w32_result"; then
+        if test -z "$func_convert_core_path_wine_to_w32_result"; then
+          func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
+        else
+          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+        fi
+      fi
+    done
+    IFS=$oldIFS
+  fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+  $debug_cmd
+
+  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+    if test "$?" -ne 0; then
+      # on failure, ensure result is empty
+      func_cygpath_result=
+    fi
+  else
+    func_cygpath_result=
+    func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
+  fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format.  Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+  $debug_cmd
+
+  # awkward: cmd appends spaces to result
+  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+    $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+  $debug_cmd
+
+  if test -z "$2" && test -n "$1"; then
+    func_error "Could not determine host file name corresponding to"
+    func_error "  '$1'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback:
+    func_to_host_file_result=$1
+  fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+  $debug_cmd
+
+  if test -z "$4" && test -n "$3"; then
+    func_error "Could not determine the host path corresponding to"
+    func_error "  '$3'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback.  This is a deliberately simplistic "conversion" and
+    # should not be "improved".  See libtool.info.
+    if test "x$1" != "x$2"; then
+      lt_replace_pathsep_chars="s|$1|$2|g"
+      func_to_host_path_result=`echo "$3" |
+        $SED -e "$lt_replace_pathsep_chars"`
+    else
+      func_to_host_path_result=$3
+    fi
+  fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+  $debug_cmd
+
+  case $4 in
+  $1 ) func_to_host_path_result=$3$func_to_host_path_result
+    ;;
+  esac
+  case $4 in
+  $2 ) func_append func_to_host_path_result "$3"
+    ;;
+  esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via '$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+  $debug_cmd
+
+  $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result.  If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+  $debug_cmd
+
+  case ,$2, in
+    *,"$to_tool_file_cmd",*)
+      func_to_tool_file_result=$1
+      ;;
+    *)
+      $to_tool_file_cmd "$1"
+      func_to_tool_file_result=$func_to_host_file_result
+      ;;
+  esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+  func_to_host_file_result=$1
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_to_host_file_result=$func_convert_core_msys_to_w32_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+    # LT_CYGPATH in this case.
+    func_to_host_file_result=`cygpath -m "$1"`
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format.  Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    func_convert_core_file_wine_to_w32 "$1"
+    func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result=$func_cygpath_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+    func_convert_core_file_wine_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result=$func_cygpath_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via '$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format.  If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+#   file name conversion function    : func_convert_file_X_to_Y ()
+#   path conversion function         : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same.  If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+  $debug_cmd
+
+  if test -z "$to_host_path_cmd"; then
+    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+    to_host_path_cmd=func_convert_path_$func_stripname_result
+  fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+  $debug_cmd
+
+  func_init_to_host_path_cmd
+  $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+  func_to_host_path_result=$1
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from ARG.  MSYS
+    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+    # and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result=$func_convert_core_msys_to_w32_result
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format.  Requires a wine environment and
+# a working winepath.  Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result=$func_cygpath_result
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from
+    # ARG. msys behavior is inconsistent here, cygpath turns them
+    # into '.;' and ';.', and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result=$func_cygpath_result
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+  $debug_cmd
+
+  func_dll_def_p_tmp=`$SED -n \
+    -e 's/^[	 ]*//' \
+    -e '/^\(;.*\)*$/d' \
+    -e 's/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p' \
+    -e q \
+    "$1"`
+  test DEF = "$func_dll_def_p_tmp"
+}
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $debug_cmd
+
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile=$nonopt  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+    pie_flag=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg=$arg
+	arg_mode=normal
+	;;
+
+      target )
+	libobj=$arg
+	arg_mode=normal
+	continue
+	;;
+
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify '-o' more than once"
+	  arg_mode=target
+	  continue
+	  ;;
+
+	-pie | -fpie | -fPIE)
+          func_append pie_flag " $arg"
+	  continue
+	  ;;
+
+	-shared | -static | -prefer-pic | -prefer-non-pic)
+	  func_append later " $arg"
+	  continue
+	  ;;
+
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+
+	-Wc,*)
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
+	  lastarg=
+	  save_ifs=$IFS; IFS=,
+	  for arg in $args; do
+	    IFS=$save_ifs
+	    func_append_quoted lastarg "$arg"
+	  done
+	  IFS=$save_ifs
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
+
+	  # Add the arguments to base_compile.
+	  func_append base_compile " $lastarg"
+	  continue
+	  ;;
+
+	*)
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg=$srcfile
+	  srcfile=$arg
+	  ;;
+	esac  #  case $arg
+	;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      func_append_quoted base_compile "$lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      func_fatal_error "you must specify an argument for -Xcompile"
+      ;;
+    target)
+      func_fatal_error "you must specify a target with '-o'"
+      ;;
+    *)
+      # Get the name of the library object.
+      test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj=$func_basename_result
+      }
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    case $libobj in
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
+    esac
+
+    case $libobj in
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+    *)
+      func_fatal_error "cannot determine name of library object from '$libobj'"
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -shared)
+	test yes = "$build_libtool_libs" \
+	  || func_fatal_configuration "cannot build a shared library"
+	build_old_libs=no
+	continue
+	;;
+
+      -static)
+	build_libtool_libs=no
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    func_quote_arg pretty "$libobj"
+    test "X$libobj" != "X$func_quote_arg_result" \
+      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
+      && func_warning "libobj name '$libobj' may not contain shell special characters."
+    func_dirname_and_basename "$obj" "/" ""
+    objname=$func_basename_result
+    xdir=$func_dirname_result
+    lobj=$xdir$objdir/$objname
+
+    test -z "$base_compile" && \
+      func_fatal_help "you must specify a compilation command"
+
+    # Delete any leftover library objects.
+    if test yes = "$build_old_libs"; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
+      pic_mode=default
+      ;;
+    esac
+    if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test no = "$compiler_c_o"; then
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
+      lockfile=$output_obj.lock
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test yes = "$need_locks"; then
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test warn = "$need_locks"; then
+      if test -f "$lockfile"; then
+	$ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+      func_append removelist " $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
+    fi
+
+    $opt_dry_run || $RM $removelist
+    func_append removelist " $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+    srcfile=$func_to_tool_file_result
+    func_quote_arg pretty "$srcfile"
+    qsrcfile=$func_quote_arg_result
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test yes = "$build_libtool_libs"; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test no != "$pic_mode"; then
+	command="$base_compile $qsrcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      fi
+
+      func_mkdir_p "$xdir$objdir"
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	func_append command " -o $lobj"
+      fi
+
+      func_show_eval_locale "$command"	\
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+      if test warn = "$need_locks" &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+
+      # Allow error messages only from the first compilation.
+      if test yes = "$suppress_opt"; then
+	suppress_output=' >/dev/null 2>&1'
+      fi
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test yes = "$build_old_libs"; then
+      if test yes != "$pic_mode"; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile$pie_flag"
+      else
+	command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test yes = "$compiler_c_o"; then
+	func_append command " -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      func_append command "$suppress_output"
+      func_show_eval_locale "$command" \
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+      if test warn = "$need_locks" &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+    fi
+
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+      # Unlock the critical section if it was locked
+      if test no != "$need_locks"; then
+	removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
+
+    exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+  test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $opt_mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to build PIC objects only
+  -prefer-non-pic   try to build non-PIC objects only
+  -shared           do not build a '.o' file suitable for static linking
+  -static           only build a '.o' file suitable for static linking
+  -Wc,FLAG
+  -Xcompiler FLAG   pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
+        ;;
+
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to '-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the '--dry-run' option if you just want to see what would be executed."
+        ;;
+
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the 'install' or 'cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -bindir BINDIR    specify path to binaries directory (for systems where
+                    libraries must be found in the PATH setting at runtime)
+  -dlopen FILE      '-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  use a list of object files found in FILE to specify objects
+  -os2dllname NAME  force a short DLL name on OS/2 (no effect on other OSes)
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+  -Wc,FLAG
+  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
+  -Wa,FLAG
+  -Xassembler FLAG  pass linker-specific FLAG directly to the assembler
+  -Wl,FLAG
+  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
+  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with '-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in '.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
+
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      *)
+        func_fatal_help "invalid operation mode '$opt_mode'"
+        ;;
+    esac
+
+    echo
+    $ECHO "Try '$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+  if test : = "$opt_help"; then
+    func_mode_help
+  else
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	func_mode_help
+      done
+    } | $SED -n '1p; 2,$s/^Usage:/  or: /p'
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	echo
+	func_mode_help
+      done
+    } |
+    $SED '1d
+      /^When reporting/,/^Report/{
+	H
+	d
+      }
+      $x
+      /information about other modes/d
+      /more detailed .*MODE/d
+      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+  fi
+  exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $debug_cmd
+
+    # The first argument is the command name.
+    cmd=$nonopt
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
+
+    # Handle -dlopen flags immediately.
+    for file in $opt_dlopen; do
+      test -f "$file" \
+	|| func_fatal_help "'$file' is not a file"
+
+      dir=
+      case $file in
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "'$lib' is not a valid libtool archive"
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "'$file' was not linked with '-export-dynamic'"
+	  continue
+	fi
+
+	func_dirname "$file" "" "."
+	dir=$func_dirname_result
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  func_append dir "/$objdir"
+	else
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
+	  fi
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir=$func_dirname_result
+	;;
+
+      *)
+	func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir=$absdir
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic=$magic
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -* | *.la | *.lo ) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file=$progdir/$program
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file=$progdir/$program
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_append_quoted args "$file"
+    done
+
+    if $opt_dry_run; then
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	echo "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    else
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
+	      else
+		$lt_unset $lt_var
+	      fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd=\$cmd$args
+    fi
+}
+
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $debug_cmd
+
+    libs=
+    libdirs=
+    admincmds=
+
+    for opt in "$nonopt" ${1+"$@"}
+    do
+      if test -d "$opt"; then
+	func_append libdirs " $opt"
+
+      elif test -f "$opt"; then
+	if func_lalib_unsafe_p "$opt"; then
+	  func_append libs " $opt"
+	else
+	  func_warning "'$opt' is not a valid libtool archive"
+	fi
+
+      else
+	func_fatal_error "invalid argument '$opt'"
+      fi
+    done
+
+    if test -n "$libs"; then
+      if test -n "$lt_sysroot"; then
+        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+      else
+        sysroot_cmd=
+      fi
+
+      # Remove sysroot references
+      if $opt_dry_run; then
+        for lib in $libs; do
+          echo "removing references to $lt_sysroot and '=' prefixes from $lib"
+        done
+      else
+        tmpdir=`func_mktempdir`
+        for lib in $libs; do
+	  $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	    > $tmpdir/tmp-la
+	  mv -f $tmpdir/tmp-la $lib
+	done
+        ${RM}r "$tmpdir"
+      fi
+    fi
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || func_append admincmds "
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    $opt_quiet && exit $EXIT_SUCCESS
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      echo "----------------------------------------------------------------------"
+      echo "Libraries have been installed in:"
+      for libdir in $libdirs; do
+	$ECHO "   $libdir"
+      done
+      echo
+      echo "If you ever happen to want to link against installed libraries"
+      echo "in a given directory, LIBDIR, you must either use libtool, and"
+      echo "specify the full pathname of the library, or use the '-LLIBDIR'"
+      echo "flag during linking and do at least one of the following:"
+      if test -n "$shlibpath_var"; then
+	echo "   - add LIBDIR to the '$shlibpath_var' environment variable"
+	echo "     during execution"
+      fi
+      if test -n "$runpath_var"; then
+	echo "   - add LIBDIR to the '$runpath_var' environment variable"
+	echo "     during linking"
+      fi
+      if test -n "$hardcode_libdir_flag_spec"; then
+	libdir=LIBDIR
+	eval flag=\"$hardcode_libdir_flag_spec\"
+
+	$ECHO "   - use the '$flag' linker flag"
+      fi
+      if test -n "$admincmds"; then
+	$ECHO "   - have your system administrator run these commands:$admincmds"
+      fi
+      if test -f /etc/ld.so.conf; then
+	echo "   - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
+      fi
+      echo
+
+      echo "See any operating system documentation about shared libraries for"
+      case $host in
+	solaris2.[6789]|solaris2.1[0-9])
+	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	  echo "pages."
+	  ;;
+	*)
+	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
+	  ;;
+      esac
+      echo "----------------------------------------------------------------------"
+    fi
+    exit $EXIT_SUCCESS
+}
+
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+    $debug_cmd
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
+       # Allow the use of GNU shtool's install command.
+       case $nonopt in *shtool*) :;; *) false;; esac
+    then
+      # Aesthetically quote it.
+      func_quote_arg pretty "$nonopt"
+      install_prog="$func_quote_arg_result "
+      arg=$1
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    func_quote_arg pretty "$arg"
+    func_append install_prog "$func_quote_arg_result"
+    install_shared_prog=$install_prog
+    case " $install_prog " in
+      *[\\\ /]cp\ *) install_cp=: ;;
+      *) install_cp=false ;;
+    esac
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=false
+    stripme=
+    no_mode=:
+    for arg
+    do
+      arg2=
+      if test -n "$dest"; then
+	func_append files " $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=: ;;
+      -f)
+	if $install_cp; then :; else
+	  prev=$arg
+	fi
+	;;
+      -g | -m | -o)
+	prev=$arg
+	;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  if test X-m = "X$prev" && test -n "$install_override_mode"; then
+	    arg2=$install_override_mode
+	    no_mode=false
+	  fi
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      func_quote_arg pretty "$arg"
+      func_append install_prog " $func_quote_arg_result"
+      if test -n "$arg2"; then
+	func_quote_arg pretty "$arg2"
+      fi
+      func_append install_shared_prog " $func_quote_arg_result"
+    done
+
+    test -z "$install_prog" && \
+      func_fatal_help "you must specify an install program"
+
+    test -n "$prev" && \
+      func_fatal_help "the '$prev' option requires an argument"
+
+    if test -n "$install_override_mode" && $no_mode; then
+      if $install_cp; then :; else
+	func_quote_arg pretty "$install_override_mode"
+	func_append install_shared_prog " -m $func_quote_arg_result"
+      fi
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+      else
+	func_fatal_help "you must specify a destination"
+      fi
+    fi
+
+    # Strip any trailing slash from the destination.
+    func_stripname '' '/' "$dest"
+    dest=$func_stripname_result
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=:
+    if $isdir; then
+      destdir=$dest
+      destname=
+    else
+      func_dirname_and_basename "$dest" "" "."
+      destdir=$func_dirname_result
+      destname=$func_basename_result
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files; shift
+      test "$#" -gt 1 && \
+	func_fatal_help "'$dest' is not a directory"
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "'$destdir' must be an absolute directory name"
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic=$magic
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	func_append staticlibs " $file"
+	;;
+
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "'$file' is not a valid libtool archive"
+
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append current_libdirs " $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append future_libdirs " $libdir" ;;
+	  esac
+	fi
+
+	func_dirname "$file" "/" ""
+	dir=$func_dirname_result
+	func_append dir "$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  func_warning "relinking '$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname=$1
+	  shift
+
+	  srcname=$realname
+	  test -n "$relink_command" && srcname=${realname}T
+
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme=$stripme
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=
+	      ;;
+	    esac
+	    ;;
+	  os2*)
+	    case $realname in
+	    *_dll.a)
+	      tstripme=
+	      ;;
+	    esac
+	    ;;
+	  esac
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try 'ln -sf' first, because the 'ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib=$destdir/$realname
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+	fi
+
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name=$func_basename_result
+	instname=$dir/${name}i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile=$destdir/$destname
+	else
+	  func_basename "$file"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest=$destfile
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to '$destfile'"
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+	# Install the old object if enabled.
+	if test yes = "$build_old_libs"; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile=$destdir/$destname
+	else
+	  func_basename "$file"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=.exe
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  func_source "$wrapper"
+
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script '$wrapper'"
+
+	  finalize=:
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "'$lib' has not been installed in '$libdir'"
+	      finalize=false
+	    fi
+	  done
+
+	  relink_command=
+	  func_source "$wrapper"
+
+	  outputname=
+	  if test no = "$fast_install" && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if $finalize; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file=$func_basename_result
+	        outputname=$tmpdir/$file
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+	        $opt_quiet || {
+	          func_quote_arg expand,pretty "$relink_command"
+		  eval "func_echo $func_quote_arg_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink '$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file=$outputname
+	      else
+	        func_warning "cannot relink '$file'"
+	      fi
+	    }
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
+	  ;;
+	esac
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      func_basename "$file"
+      name=$func_basename_result
+
+      # Set up the ranlib parameters.
+      oldlib=$destdir/$name
+      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+      tool_oldlib=$func_to_tool_file_result
+
+      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+      fi
+
+      # Do each command in the postinstall commands.
+      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+    done
+
+    test -n "$future_libdirs" && \
+      func_warning "remember to run '$progname --finish$future_libdirs'"
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      $opt_dry_run && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $debug_cmd
+
+    my_outputname=$1
+    my_originator=$2
+    my_pic_p=${3-false}
+    my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms=${my_outputname}S.c
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist=$output_objdir/$my_outputname.nm
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test yes = "$dlself"; then
+	  func_verbose "generating symbol list for '$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+	    func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
+	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols=$output_objdir/$outputname.exp
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin* | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from '$dlprefile'"
+	  func_basename "$dlprefile"
+	  name=$func_basename_result
+          case $host in
+	    *cygwin* | *mingw* | *cegcc* )
+	      # if an import library, we need to obtain dlname
+	      if func_win32_import_lib_p "$dlprefile"; then
+	        func_tr_sh "$dlprefile"
+	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
+	        dlprefile_dlbasename=
+	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+	          # Use subshell, to avoid clobbering current variable values
+	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+	          if test -n "$dlprefile_dlname"; then
+	            func_basename "$dlprefile_dlname"
+	            dlprefile_dlbasename=$func_basename_result
+	          else
+	            # no lafile. user explicitly requested -dlpreopen <import library>.
+	            $sharedlib_from_linklib_cmd "$dlprefile"
+	            dlprefile_dlbasename=$sharedlib_from_linklib_result
+	          fi
+	        fi
+	        $opt_dry_run || {
+	          if test -n "$dlprefile_dlbasename"; then
+	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+	          else
+	            func_warning "Could not compute DLL name from $name"
+	            eval '$ECHO ": $name " >> "$nlist"'
+	          fi
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+	        }
+	      else # not an import lib
+	        $opt_dry_run || {
+	          eval '$ECHO ": $name " >> "$nlist"'
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	        }
+	      fi
+	    ;;
+	    *)
+	      $opt_dry_run || {
+	        eval '$ECHO ": $name " >> "$nlist"'
+	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	      }
+	    ;;
+          esac
+	done
+
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+
+	  func_show_eval '$RM "${nlist}I"'
+	  if test -n "$global_symbol_to_import"; then
+	    eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+	  fi
+
+	  echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];\
+"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+  LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+  for (; symbol->name; ++symbol)
+    {"
+	    $SED 's/.*/      if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+	    echo >> "$output_objdir/$my_dlsyms" "\
+    }
+}"
+	  fi
+	  echo >> "$output_objdir/$my_dlsyms" "\
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{ {\"$my_originator\", (void *) 0},"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+  {\"@INIT@\", (void *) &lt_syminit},"
+	  fi
+
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  echo >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    $my_pic_p && pic_flag_for_symtable=" $pic_flag"
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) func_append symtab_cflags " $arg" ;;
+	  esac
+	done
+
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
+
+	# Transform the symbol file into the correct name.
+	symfileobj=$output_objdir/${my_outputname}S.$objext
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for '$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+    fi
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+  $debug_cmd
+
+  win32_libid_type=unknown
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+      case $nm_interface in
+      "MS dumpbin")
+	if func_cygming_ms_implib_p "$1" ||
+	   func_cygming_gnu_implib_p "$1"
+	then
+	  win32_nmres=import
+	else
+	  win32_nmres=
+	fi
+	;;
+      *)
+	func_to_tool_file "$1" func_convert_file_msys_to_w32
+	win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+	  $SED -n -e '
+	    1,100{
+		/ I /{
+		    s|.*|import|
+		    p
+		    q
+		}
+	    }'`
+	;;
+      esac
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+  $debug_cmd
+
+  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+  $debug_cmd
+
+  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+    $SED '/^Contents of section '"$match_literal"':/{
+      # Place marker at beginning of archive member dllname section
+      s/.*/====MARK====/
+      p
+      d
+    }
+    # These lines can sometimes be longer than 43 characters, but
+    # are always uninteresting
+    /:[	 ]*file format pe[i]\{,1\}-/d
+    /^In archive [^:]*:/d
+    # Ensure marker is printed
+    /^====MARK====/p
+    # Remove all lines with less than 43 characters
+    /^.\{43\}/!d
+    # From remaining lines, remove first 43 characters
+    s/^.\{43\}//' |
+    $SED -n '
+      # Join marker and all lines until next marker into a single line
+      /^====MARK====/ b para
+      H
+      $ b para
+      b
+      :para
+      x
+      s/\n//g
+      # Remove the marker
+      s/^====MARK====//
+      # Remove trailing dots and whitespace
+      s/[\. \t]*$//
+      # Print
+      /./p' |
+    # we now have a list, one entry per line, of the stringified
+    # contents of the appropriate section of all members of the
+    # archive that possess that section. Heuristic: eliminate
+    # all those that have a first or second character that is
+    # a '.' (that is, objdump's representation of an unprintable
+    # character.) This should work for all archives with less than
+    # 0x302f exports -- but will fail for DLLs whose name actually
+    # begins with a literal '.' or a single character followed by
+    # a '.'.
+    #
+    # Of those that remain, print the first one.
+    $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+  $debug_cmd
+
+  if func_cygming_gnu_implib_p "$1"; then
+    # binutils import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+  elif func_cygming_ms_implib_p "$1"; then
+    # ms-generated import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+  else
+    # unknown
+    sharedlib_from_linklib_result=
+  fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $debug_cmd
+
+    f_ex_an_ar_dir=$1; shift
+    f_ex_an_ar_oldlib=$1
+    if test yes = "$lock_old_archive_extraction"; then
+      lockfile=$f_ex_an_ar_oldlib.lock
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+		   'stat=$?; rm -f "$lockfile"; exit $stat'
+    if test yes = "$lock_old_archive_extraction"; then
+      $opt_dry_run || rm -f "$lockfile"
+    fi
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $debug_cmd
+
+    my_gentop=$1; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=
+    my_xlib=
+    my_xabs=
+    my_xdir=
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib=$func_basename_result
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir=$my_gentop/$my_xlib_u
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  func_basename "$darwin_archive"
+	  darwin_base_archive=$func_basename_result
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches; do
+	      func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
+	      cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      func_extract_an_archive "`pwd`" "$darwin_base_archive"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+    done
+
+    func_extract_archives_result=$my_oldobjs
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory where it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=${1-no}
+
+	$ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    file=\"\$0\""
+
+    func_quote_arg pretty "$ECHO"
+    qECHO=$func_quote_arg_result
+    $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+    ECHO=$qECHO
+  fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ that is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options that match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+  lt_script_arg0=\$0
+  shift
+  for lt_opt
+  do
+    case \"\$lt_opt\" in
+    --lt-debug) lt_option_debug=1 ;;
+    --lt-dump-script)
+        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+        cat \"\$lt_dump_D/\$lt_dump_F\"
+        exit 0
+      ;;
+    --lt-*)
+        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+        exit 1
+      ;;
+    esac
+  done
+
+  # Print the debug banner immediately:
+  if test -n \"\$lt_option_debug\"; then
+    echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
+  fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+  lt_dump_args_N=1;
+  for lt_arg
+  do
+    \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+  done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+  case $host in
+  # Backslashes separate directories on plain windows
+  *-*-mingw | *-*-os2* | *-cegcc*)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+    ;;
+
+  *)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+    ;;
+  esac
+  $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+  case \" \$* \" in
+  *\\ --lt-*)
+    for lt_wr_arg
+    do
+      case \$lt_wr_arg in
+      --lt-*) ;;
+      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+      esac
+      shift
+    done ;;
+  esac
+  func_exec_program_core \${1+\"\$@\"}
+}
+
+  # Parse options
+  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+  done
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test yes = "$fast_install"; then
+	  $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
+
+	  $ECHO "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	\$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
+	else
+	  $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$ECHO "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# fixup the dll searchpath if we need to.
+	#
+	# Fix the DLL searchpath if we need to.  Do this before prepending
+	# to shlibpath, because on Windows, both are PATH and uninstalled
+	# libraries must come first.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	# Export our shlibpath_var if we have one.
+	if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	$ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+      func_exec_program \${1+\"\$@\"}
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+*/
+EOF
+	    cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
+/* declarations of non-ANSI functions */
+#if defined __MINGW32__
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined __CYGWIN__
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined other_platform || defined ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined _MSC_VER
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+# define S_IXUSR _S_IEXEC
+#elif defined __MINGW32__
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+#elif defined __CYGWIN__
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined other platforms ... */
+#endif
+
+#if defined PATH_MAX
+# define LT_PATHMAX PATH_MAX
+#elif defined MAXPATHLEN
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+  defined __OS2__
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free (stale); stale = 0; } \
+} while (0)
+
+#if defined LT_DEBUGWRAPPER
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+	    cat <<EOF
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+# define externally_visible volatile
+#else
+# define externally_visible __attribute__((externally_visible)) volatile
+#endif
+externally_visible const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_path "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_path "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test yes = "$fast_install"; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  int rval = 127;
+
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  newargz = XMALLOC (char *, (size_t) argc + 1);
+
+  /* very simple arg parsing; don't want to rely on getopt
+   * also, copy all non cwrapper options to newargz, except
+   * argz[0], which is handled differently
+   */
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (STREQ (argv[i], dumpscript_opt))
+	{
+EOF
+	    case $host in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
+
+	    cat <<"EOF"
+	  lt_dump_script (stdout);
+	  return 0;
+	}
+      if (STREQ (argv[i], debug_opt))
+	{
+          lt_debug = 1;
+          continue;
+	}
+      if (STREQ (argv[i], ltwrapper_option_prefix))
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal (__FILE__, __LINE__,
+		    "unrecognized %s option: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+EOF
+	    cat <<EOF
+  /* The GNU banner must be the first non-error debug message */
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
+EOF
+	    cat <<"EOF"
+  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (before symlink chase) at: %s\n",
+		  tmp_pathspec);
+
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (after symlink chase) at: %s\n",
+		  actual_cwrapper_path);
+  XFREE (tmp_pathspec);
+
+  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(main) libtool target name: %s\n",
+		  target_name);
+EOF
+
+	    cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
+
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
+
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+	*p = '/';
+      }
+  }
+EOF
+	    ;;
+	    esac
+
+	    cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
+     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+     because on Windows, both *_VARNAMEs are PATH but uninstalled
+     libraries must come first. */
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+		  nonnull (lt_argv_zero));
+  for (i = 0; i < newargc; i++)
+    {
+      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+		      i, nonnull (newargz[i]));
+    }
+
+EOF
+
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  newargz = prepare_spawn (newargz);
+  rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      lt_debugprintf (__FILE__, __LINE__,
+		      "(main) failed to launch target \"%s\": %s\n",
+		      lt_argv_zero, nonnull (strerror (errno)));
+      return 127;
+    }
+  return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
+
+	    cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable (const char *path)
+{
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
+
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  size_t tmp_len;
+  char *concat_name;
+
+  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+                  nonempty (wrapper));
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+	return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+    }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+	has_slash = 1;
+	break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = (size_t) (q - p);
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+                              nonnull (strerror (errno)));
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+              nonnull (strerror (errno)));
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      lt_debugprintf (__FILE__, __LINE__,
+		      "checking path component for symlinks: %s\n",
+		      tmp_pathspec);
+      if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
+
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
+      else
+	{
+	  lt_fatal (__FILE__, __LINE__,
+		    "error accessing file \"%s\": %s",
+		    tmp_pathspec, nonnull (strerror (errno)));
+	}
+    }
+  XFREE (tmp_pathspec);
+
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
+
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal (__FILE__, __LINE__,
+		"could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert (str != NULL);
+  assert (pat != NULL);
+
+  len = strlen (str);
+  patlen = strlen (pat);
+
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (STREQ (str, pat))
+	*str = '\0';
+    }
+  return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+  va_list args;
+  if (lt_debug)
+    {
+      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+      va_start (args, fmt);
+      (void) vfprintf (stderr, fmt, args);
+      va_end (args);
+    }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+	       int line, const char *mode,
+	       const char *message, va_list ap)
+{
+  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+  va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+  return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+  return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_setenv) setting '%s' to '%s'\n",
+                  nonnull (name), nonnull (value));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    size_t len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      size_t orig_value_len = strlen (orig_value);
+      size_t add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      size_t len = strlen (new_value);
+      while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[--len] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+EOF
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+   Note that spawn() does not by itself call the command interpreter
+     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+         GetVersionEx(&v);
+         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+      }) ? "cmd.exe" : "command.com").
+   Instead it simply concatenates the arguments, separated by ' ', and calls
+   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
+   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+   special way:
+   - Space and tab are interpreted as delimiters. They are not treated as
+     delimiters if they are surrounded by double quotes: "...".
+   - Unescaped double quotes are removed from the input. Their only effect is
+     that within double quotes, space and tab are treated like normal
+     characters.
+   - Backslashes not followed by double quotes are not special.
+   - But 2*n+1 backslashes followed by a double quote become
+     n backslashes followed by a double quote (n >= 0):
+       \" -> "
+       \\\" -> \"
+       \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+  size_t argc;
+  char **new_argv;
+  size_t i;
+
+  /* Count number of arguments.  */
+  for (argc = 0; argv[argc] != NULL; argc++)
+    ;
+
+  /* Allocate new argument vector.  */
+  new_argv = XMALLOC (char *, argc + 1);
+
+  /* Put quoted arguments into the new argument vector.  */
+  for (i = 0; i < argc; i++)
+    {
+      const char *string = argv[i];
+
+      if (string[0] == '\0')
+	new_argv[i] = xstrdup ("\"\"");
+      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+	{
+	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+	  size_t length;
+	  unsigned int backslashes;
+	  const char *s;
+	  char *quoted_string;
+	  char *p;
+
+	  length = 0;
+	  backslashes = 0;
+	  if (quote_around)
+	    length++;
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		length += backslashes + 1;
+	      length++;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    length += backslashes + 1;
+
+	  quoted_string = XMALLOC (char, length + 1);
+
+	  p = quoted_string;
+	  backslashes = 0;
+	  if (quote_around)
+	    *p++ = '"';
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		{
+		  unsigned int j;
+		  for (j = backslashes + 1; j > 0; j--)
+		    *p++ = '\\';
+		}
+	      *p++ = c;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    {
+	      unsigned int j;
+	      for (j = backslashes; j > 0; j--)
+		*p++ = '\\';
+	      *p++ = '"';
+	    }
+	  *p = '\0';
+
+	  new_argv[i] = quoted_string;
+	}
+      else
+	new_argv[i] = (char *) string;
+    }
+  new_argv[argc] = NULL;
+
+  return new_argv;
+}
+EOF
+		;;
+	    esac
+
+            cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+	    func_emit_wrapper yes |
+	      $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/  fputs ("\1", f);/p
+g
+D'
+            cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+    $debug_cmd
+
+    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+    *import*) : ;;
+    *) false ;;
+    esac
+}
+
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+    $debug_cmd
+
+    case " $compile_command " in
+    *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
+      suncc_use_cstd_abi=no
+      ;;
+    *)
+      suncc_use_cstd_abi=yes
+      ;;
+    esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+    $debug_cmd
+
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # what system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll that has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args=$nonopt
+    base_compile="$nonopt $@"
+    compile_command=$nonopt
+    finalize_command=$nonopt
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+    new_inherited_linker_flags=
+
+    avoid_version=no
+    bindir=
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    os2dllname=
+    non_pic_objects=
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=false
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+    weak_libs=
+    single_module=$wl-single_module
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -shared)
+	test yes != "$build_libtool_libs" \
+	  && func_fatal_configuration "cannot build a shared library"
+	build_old_libs=no
+	break
+	;;
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
+	  if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
+	    func_warning "complete static linking is impossible in this configuration"
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	-static)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=built
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
+	build_libtool_libs=no
+	build_old_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg=$1
+      shift
+      func_quote_arg pretty,unquoted "$arg"
+      qarg=$func_quote_arg_unquoted_result
+      func_append libtool_args " $func_quote_arg_result"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  func_append compile_command " @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	bindir)
+	  bindir=$arg
+	  prev=
+	  continue
+	  ;;
+	dlfiles|dlprefiles)
+	  $preload || {
+	    # Add the symbol object into the linking commands.
+	    func_append compile_command " @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
+	    preload=:
+	  }
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test no = "$dlself"; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test dlprefiles = "$prev"; then
+	      dlself=yes
+	    elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test dlfiles = "$prev"; then
+	      func_append dlfiles " $arg"
+	    else
+	      func_append dlprefiles " $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols=$arg
+	  test -f "$arg" \
+	    || func_fatal_error "symbol file '$arg' does not exist"
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex=$arg
+	  prev=
+	  continue
+	  ;;
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) func_append deplibs " $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir=$arg
+	  prev=
+	  continue
+	  ;;
+	mllvm)
+	  # Clang does not use LLVM to link, so we can simply discard any
+	  # '-mllvm $arg' options when doing the link step.
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat "$save_arg"`
+	    do
+#	      func_append moreargs " $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if func_lalib_unsafe_p "$arg"; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		func_source "$arg"
+
+		if test -z "$pic_object" ||
+		   test -z "$non_pic_object" ||
+		   test none = "$pic_object" &&
+		   test none = "$non_pic_object"; then
+		  func_fatal_error "cannot find name of object for '$arg'"
+		fi
+
+		# Extract subdirectory from the argument.
+		func_dirname "$arg" "/" ""
+		xdir=$func_dirname_result
+
+		if test none != "$pic_object"; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object=$xdir$pic_object
+
+		  if test dlfiles = "$prev"; then
+		    if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
+		      func_append dlfiles " $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test dlprefiles = "$prev"; then
+		    # Preload the old-style object.
+		    func_append dlprefiles " $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  func_append libobjs " $pic_object"
+		  arg=$pic_object
+		fi
+
+		# Non-PIC object.
+		if test none != "$non_pic_object"; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object=$xdir$non_pic_object
+
+		  # A standard non-PIC object
+		  func_append non_pic_objects " $non_pic_object"
+		  if test -z "$pic_object" || test none = "$pic_object"; then
+		    arg=$non_pic_object
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object=$pic_object
+		  func_append non_pic_objects " $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if $opt_dry_run; then
+		  # Extract subdirectory from the argument.
+		  func_dirname "$arg" "/" ""
+		  xdir=$func_dirname_result
+
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "'$arg' is not a valid libtool object"
+		fi
+	      fi
+	    done
+	  else
+	    func_fatal_error "link input file '$arg' does not exist"
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	os2dllname)
+	  os2dllname=$arg
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex=$arg
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release=-$arg
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    func_fatal_error "only absolute run-paths are allowed"
+	    ;;
+	  esac
+	  if test rpath = "$prev"; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) func_append rpath " $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) func_append xrpath " $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	shrext)
+	  shrext_cmds=$arg
+	  prev=
+	  continue
+	  ;;
+	weak)
+	  func_append weak_libs " $arg"
+	  prev=
+	  continue
+	  ;;
+	xassembler)
+	  func_append compiler_flags " -Xassembler $qarg"
+	  prev=
+	  func_append compile_command " -Xassembler $qarg"
+	  func_append finalize_command " -Xassembler $qarg"
+	  continue
+	  ;;
+	xcclinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xcompiler)
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $wl$qarg"
+	  prev=
+	  func_append compile_command " $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n "$prev"
+
+      prevarg=$arg
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	func_fatal_error "'-allow-undefined' must not be used because it is the default"
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -bindir)
+	prev=bindir
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
+	fi
+	if test X-export-symbols = "X$arg"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -framework)
+	prev=framework
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	func_stripname "-L" '' "$arg"
+	if test -z "$func_stripname_result"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between '-L' and '$1'"
+	  else
+	    func_fatal_error "need path for '-L' option"
+	  fi
+	fi
+	func_resolve_sysroot "$func_stripname_result"
+	dir=$func_resolve_sysroot_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  test -z "$absdir" && \
+	    func_fatal_error "cannot determine absolute directory name of '$dir'"
+	  dir=$absdir
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "* | *" $arg "*)
+	  # Will only happen for absolute or sysroot arguments
+	  ;;
+	*)
+	  # Preserve sysroot, but never include relative directories
+	  case $dir in
+	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+	    *) func_append deplibs " -L$dir" ;;
+	  esac
+	  func_append lib_search_path " $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
+	  *) func_append dllsearchpath ":$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test X-lc = "X$arg" || test X-lm = "X$arg"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig* | *-*-midnightbsd*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    func_append deplibs " System.ltframework"
+	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  esac
+	elif test X-lc_r = "X$arg"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig* | *-*-midnightbsd*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
+	fi
+	func_append deplibs " $arg"
+	continue
+	;;
+
+      -mllvm)
+	prev=mllvm
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      # Darwin uses the -arch flag to determine output architecture.
+      -model|-arch|-isysroot|--sysroot)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	prev=xcompiler
+	continue
+	;;
+     # Solaris ld rejects as of 11.4. Refer to Oracle bug 22985199.
+     -pthread)
+	case $host in
+	  *solaris2*) ;;
+	  *)
+	    case "$new_inherited_linker_flags " in
+	        *" $arg "*) ;;
+	        * ) func_append new_inherited_linker_flags " $arg" ;;
+	    esac
+	  ;;
+	esac
+	continue
+	;;
+      -mt|-mthreads|-kthread|-Kthread|-pthreads|--thread-safe \
+      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	case "$new_inherited_linker_flags " in
+	    *" $arg "*) ;;
+	    * ) func_append new_inherited_linker_flags " $arg" ;;
+	esac
+	continue
+	;;
+
+      -multi_module)
+	single_module=$wl-multi_module
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  func_warning "'-no-install' is ignored for $host"
+	  func_warning "assuming '-no-fast-install' instead"
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
+      -os2dllname)
+	prev=os2dllname
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	=*)
+	  func_stripname '=' '' "$dir"
+	  dir=$lt_sysroot$func_stripname_result
+	  ;;
+	*)
+	  func_fatal_error "only absolute run-paths are allowed"
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) func_append xrpath " $dir" ;;
+	esac
+	continue
+	;;
+
+      -shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -static | -static-libtool-libs)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
+
+      -weak)
+        prev=weak
+	continue
+	;;
+
+      -Wc,*)
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs=$IFS; IFS=,
+	for flag in $args; do
+	  IFS=$save_ifs
+          func_quote_arg pretty "$flag"
+	  func_append arg " $func_quote_arg_result"
+	  func_append compiler_flags " $func_quote_arg_result"
+	done
+	IFS=$save_ifs
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Wl,*)
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs=$IFS; IFS=,
+	for flag in $args; do
+	  IFS=$save_ifs
+          func_quote_arg pretty "$flag"
+	  func_append arg " $wl$func_quote_arg_result"
+	  func_append compiler_flags " $wl$func_quote_arg_result"
+	  func_append linker_flags " $func_quote_arg_result"
+	done
+	IFS=$save_ifs
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Xassembler)
+        prev=xassembler
+        continue
+        ;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
+
+      # -msg_* for osf cc
+      -msg_*)
+	func_quote_arg pretty "$arg"
+	arg=$func_quote_arg_result
+	;;
+
+      # Flags to be passed through unchanged, with rationale:
+      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
+      # -r[0-9][0-9]*        specify processor for the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+      # +DA*, +DD*           enable 64-bit mode for the HP compiler
+      # -q*                  compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+      # -F/path              path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # -fstack-protector*   stack protector flags for GCC
+      # @file                GCC response files
+      # -tp=*                Portland pgcc target processor selection
+      # --sysroot=*          for sysroot support
+      # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      # -specs=*             GCC specs files
+      # -stdlib=*            select c++ std lib with clang
+      # -fsanitize=*         Clang/GCC memory and address sanitizer
+      # -fuse-ld=*           Linker select flags for GCC
+      # -static-*            direct GCC to link specific libraries statically
+      # -fcilkplus           Cilk Plus language extension features for C/C++
+      # -Wa,*                Pass flags directly to the assembler
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+      -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*| \
+      -specs=*|-fsanitize=*|-fuse-ld=*|-static-*|-fcilkplus|-Wa,*)
+        func_quote_arg pretty "$arg"
+	arg=$func_quote_arg_result
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
+        func_append compiler_flags " $arg"
+        continue
+        ;;
+
+      -Z*)
+        if test os2 = "`expr $host : '.*\(os2\)'`"; then
+          # OS/2 uses -Zxxx to specify OS/2-specific options
+	  compiler_flags="$compiler_flags $arg"
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  case $arg in
+	  -Zlinker | -Zstack)
+	    prev=xcompiler
+	    ;;
+	  esac
+	  continue
+        else
+	  # Otherwise treat like 'Some other compiler flag' below
+	  func_quote_arg pretty "$arg"
+	  arg=$func_quote_arg_result
+        fi
+	;;
+
+      # Some other compiler flag.
+      -* | +*)
+        func_quote_arg pretty "$arg"
+	arg=$func_quote_arg_result
+	;;
+
+      *.$objext)
+	# A standard object.
+	func_append objs " $arg"
+	;;
+
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if func_lalib_unsafe_p "$arg"; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  func_source "$arg"
+
+	  if test -z "$pic_object" ||
+	     test -z "$non_pic_object" ||
+	     test none = "$pic_object" &&
+	     test none = "$non_pic_object"; then
+	    func_fatal_error "cannot find name of object for '$arg'"
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  func_dirname "$arg" "/" ""
+	  xdir=$func_dirname_result
+
+	  test none = "$pic_object" || {
+	    # Prepend the subdirectory the object is found in.
+	    pic_object=$xdir$pic_object
+
+	    if test dlfiles = "$prev"; then
+	      if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
+		func_append dlfiles " $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test dlprefiles = "$prev"; then
+	      # Preload the old-style object.
+	      func_append dlprefiles " $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    func_append libobjs " $pic_object"
+	    arg=$pic_object
+	  }
+
+	  # Non-PIC object.
+	  if test none != "$non_pic_object"; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object=$xdir$non_pic_object
+
+	    # A standard non-PIC object
+	    func_append non_pic_objects " $non_pic_object"
+	    if test -z "$pic_object" || test none = "$pic_object"; then
+	      arg=$non_pic_object
+	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object=$pic_object
+	    func_append non_pic_objects " $non_pic_object"
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if $opt_dry_run; then
+	    # Extract subdirectory from the argument.
+	    func_dirname "$arg" "/" ""
+	    xdir=$func_dirname_result
+
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  else
+	    func_fatal_error "'$arg' is not a valid libtool object"
+	  fi
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	func_append deplibs " $arg"
+	func_append old_deplibs " $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	func_resolve_sysroot "$arg"
+	if test dlfiles = "$prev"; then
+	  # This library was specified with -dlopen.
+	  func_append dlfiles " $func_resolve_sysroot_result"
+	  prev=
+	elif test dlprefiles = "$prev"; then
+	  # The library was specified with -dlpreopen.
+	  func_append dlprefiles " $func_resolve_sysroot_result"
+	  prev=
+	else
+	  func_append deplibs " $func_resolve_sysroot_result"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	func_quote_arg pretty "$arg"
+	arg=$func_quote_arg_result
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+      fi
+    done # argument parsing loop
+
+    test -n "$prev" && \
+      func_fatal_help "the '$prevarg' option requires an argument"
+
+    if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      func_append compile_command " $arg"
+      func_append finalize_command " $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    func_basename "$output"
+    outputname=$func_basename_result
+    libobjs_save=$libobjs
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    # Definition is injected by LT_CONFIG during libtool generation.
+    func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
+    func_dirname "$output" "/" ""
+    output_objdir=$func_dirname_result$objdir
+    func_to_tool_file "$output_objdir/"
+    tool_output_objdir=$func_to_tool_file_result
+    # Create the object directory.
+    func_mkdir_p "$output_objdir"
+
+    # Determine the type of output
+    case $output in
+    "")
+      func_fatal_help "you must specify an output file"
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if $opt_preserve_dup_deps; then
+	case "$libs " in
+	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	esac
+      fi
+      func_append libs " $deplib"
+    done
+
+    if test lib = "$linkmode"; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if $opt_duplicate_compiler_generated_deps; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+	  esac
+	  func_append pre_post_deps " $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+
+    case $linkmode in
+    lib)
+	passes="conv dlpreopen link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=false
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+
+    for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test lib,link = "$linkmode,$pass"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+        tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs=$tmp_deplibs
+      fi
+
+      if test lib,link = "$linkmode,$pass" ||
+	 test prog,scan = "$linkmode,$pass"; then
+	libs=$deplibs
+	deplibs=
+      fi
+      if test prog = "$linkmode"; then
+	case $pass in
+	dlopen) libs=$dlfiles ;;
+	dlpreopen) libs=$dlprefiles ;;
+	link)
+	  libs="$deplibs %DEPLIBS%"
+	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+	  ;;
+	esac
+      fi
+      if test lib,dlpreopen = "$linkmode,$pass"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  func_resolve_sysroot "$lib"
+	  case $lib in
+	  *.la)	func_source "$func_resolve_sysroot_result" ;;
+	  esac
+
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+	    func_basename "$deplib"
+            deplib_base=$func_basename_result
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) func_append deplibs " $deplib" ;;
+	    esac
+	  done
+	done
+	libs=$dlprefiles
+      fi
+      if test dlopen = "$pass"; then
+	# Collect dlpreopened libraries
+	save_deplibs=$deplibs
+	deplibs=
+      fi
+
+      for deplib in $libs; do
+	lib=
+	found=false
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	  if test prog,link = "$linkmode,$pass"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    func_append compiler_flags " $deplib"
+	    if test lib = "$linkmode"; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test lib != "$linkmode" && test prog != "$linkmode"; then
+	    func_warning "'-l' is ignored for archives/objects"
+	    continue
+	  fi
+	  func_stripname '-l' '' "$deplib"
+	  name=$func_stripname_result
+	  if test lib = "$linkmode"; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib=$searchdir/lib$name$search_ext
+	      if test -f "$lib"; then
+		if test .la = "$search_ext"; then
+		  found=:
+		else
+		  found=false
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if $found; then
+	    # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if func_lalib_p "$lib"; then
+		  library_names=
+		  old_library=
+		  func_source "$lib"
+		  for l in $old_library $library_names; do
+		    ll=$l
+		  done
+		  if test "X$ll" = "X$old_library"; then # only static version available
+		    found=false
+		    func_dirname "$lib" "" "."
+		    ladir=$func_dirname_result
+		    lib=$ladir/$old_library
+		    if test prog,link = "$linkmode,$pass"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+		;;
+	      *) ;;
+	      esac
+	    fi
+	  else
+	    # deplib doesn't seem to be a libtool library
+	    if test prog,link = "$linkmode,$pass"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  fi
+	  ;; # -l
+	*.ltframework)
+	  if test prog,link = "$linkmode,$pass"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test lib = "$linkmode"; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test conv = "$pass" && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  prog)
+	    if test conv = "$pass"; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test scan = "$pass"; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  *)
+	    func_warning "'-L' is ignored for archives/objects"
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test link = "$pass"; then
+	    func_stripname '-R' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    dir=$func_resolve_sysroot_result
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) func_append xrpath " $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la)
+	  func_resolve_sysroot "$deplib"
+	  lib=$func_resolve_sysroot_result
+	  ;;
+	*.$libext)
+	  if test conv = "$pass"; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    # Linking convenience modules into shared libraries is allowed,
+	    # but linking other static libraries is non-portable.
+	    case " $dlpreconveniencelibs " in
+	    *" $deplib "*) ;;
+	    *)
+	      valid_a_lib=false
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		    valid_a_lib=:
+		  fi
+		;;
+		pass_all)
+		  valid_a_lib=:
+		;;
+	      esac
+	      if $valid_a_lib; then
+		echo
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      else
+		echo
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because the file extensions .$libext of this argument makes me believe"
+		echo "*** that it is just a static archive that I should not use here."
+	      fi
+	      ;;
+	    esac
+	    continue
+	    ;;
+	  prog)
+	    if test link != "$pass"; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test conv = "$pass"; then
+	    deplibs="$deplib $deplibs"
+	  elif test prog = "$linkmode"; then
+	    if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      func_append newdlprefiles " $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      func_append newdlfiles " $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=:
+	  continue
+	  ;;
+	esac # case $deplib
+
+	$found || test -f "$lib" \
+	  || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$lib" \
+	  || func_fatal_error "'$lib' is not a valid libtool archive"
+
+	func_dirname "$lib" "" "."
+	ladir=$func_dirname_result
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	inherited_linker_flags=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variables installed, or shouldnotlink
+	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
+
+	# Read the .la file
+	func_source "$lib"
+
+	# Convert "-framework foo" to "foo.ltframework"
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	if test lib,link = "$linkmode,$pass" ||
+	   test prog,scan = "$linkmode,$pass" ||
+	   { test prog != "$linkmode" && test lib != "$linkmode"; }; then
+	  test -n "$dlopen" && func_append dlfiles " $dlopen"
+	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+	fi
+
+	if test conv = "$pass"; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      func_fatal_error "cannot find name of link library for '$lib'"
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    func_append convenience " $ladir/$objdir/$old_library"
+	    func_append old_convenience " $ladir/$objdir/$old_library"
+	    tmp_libs=
+	    for deplib in $dependency_libs; do
+	      deplibs="$deplib $deplibs"
+	      if $opt_preserve_dup_deps; then
+		case "$tmp_libs " in
+		*" $deplib "*) func_append specialdeplibs " $deplib" ;;
+		esac
+	      fi
+	      func_append tmp_libs " $deplib"
+	    done
+	  elif test prog != "$linkmode" && test lib != "$linkmode"; then
+	    func_fatal_error "'$lib' is not a convenience library"
+	  fi
+	  continue
+	fi # $pass = conv
+
+
+	# Get the name of the library we link against.
+	linklib=
+	if test -n "$old_library" &&
+	   { test yes = "$prefer_static_libs" ||
+	     test built,no = "$prefer_static_libs,$installed"; }; then
+	  linklib=$old_library
+	else
+	  for l in $old_library $library_names; do
+	    linklib=$l
+	  done
+	fi
+	if test -z "$linklib"; then
+	  func_fatal_error "cannot find name of link library for '$lib'"
+	fi
+
+	# This library was specified with -dlopen.
+	if test dlopen = "$pass"; then
+	  test -z "$libdir" \
+	    && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
+	  if test -z "$dlname" ||
+	     test yes != "$dlopen_support" ||
+	     test no = "$build_libtool_libs"
+	  then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    func_append dlprefiles " $lib $dependency_libs"
+	  else
+	    func_append newdlfiles " $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    func_warning "cannot determine absolute directory name of '$ladir'"
+	    func_warning "passing it literally to the linker, although it might fail"
+	    abs_ladir=$ladir
+	  fi
+	  ;;
+	esac
+	func_basename "$lib"
+	laname=$func_basename_result
+
+	# Find the relevant object directory and library name.
+	if test yes = "$installed"; then
+	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    func_warning "library '$lib' was moved."
+	    dir=$ladir
+	    absdir=$abs_ladir
+	    libdir=$abs_ladir
+	  else
+	    dir=$lt_sysroot$libdir
+	    absdir=$lt_sysroot$libdir
+	  fi
+	  test yes = "$hardcode_automatic" && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir=$ladir
+	    absdir=$abs_ladir
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  else
+	    dir=$ladir/$objdir
+	    absdir=$abs_ladir/$objdir
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  fi
+	fi # $installed = yes
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
+
+	# This library was specified with -dlpreopen.
+	if test dlpreopen = "$pass"; then
+	  if test -z "$libdir" && test prog = "$linkmode"; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
+	  fi
+	  case $host in
+	    # special handling for platforms with PE-DLLs.
+	    *cygwin* | *mingw* | *cegcc* )
+	      # Linker will automatically link against shared library if both
+	      # static and shared are present.  Therefore, ensure we extract
+	      # symbols from the import library if a shared library is present
+	      # (otherwise, the dlopen module name will be incorrect).  We do
+	      # this by putting the import library name into $newdlprefiles.
+	      # We recover the dlopen module name by 'saving' the la file
+	      # name in a special purpose variable, and (later) extracting the
+	      # dlname from the la file.
+	      if test -n "$dlname"; then
+	        func_tr_sh "$dir/$linklib"
+	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+	        func_append newdlprefiles " $dir/$linklib"
+	      else
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      fi
+	    ;;
+	    * )
+	      # Prefer using a static library (so that no silly _DYNAMIC symbols
+	      # are required to link).
+	      if test -n "$old_library"; then
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      # Otherwise, use the dlname, so that lt_dlopen finds it.
+	      elif test -n "$dlname"; then
+	        func_append newdlprefiles " $dir/$dlname"
+	      else
+	        func_append newdlprefiles " $dir/$linklib"
+	      fi
+	    ;;
+	  esac
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test lib = "$linkmode"; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test prog,link = "$linkmode,$pass"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+
+	if test prog = "$linkmode" && test link != "$pass"; then
+	  func_append newlib_search_path " $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=false
+	  if test no != "$link_all_deplibs" || test -z "$library_names" ||
+	     test no = "$build_libtool_libs"; then
+	    linkalldeplibs=:
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) func_stripname '-L' '' "$deplib"
+	         func_resolve_sysroot "$func_stripname_result"
+	         func_append newlib_search_path " $func_resolve_sysroot_result"
+		 ;;
+	    esac
+	    # Need to link against all dependency_libs?
+	    if $linkalldeplibs; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if $opt_preserve_dup_deps; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	if test prog,link = "$linkmode,$pass"; then
+	  if test -n "$library_names" &&
+	     { { test no = "$prefer_static_libs" ||
+	         test built,yes = "$prefer_static_libs,$installed"; } ||
+	       test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
+	      # Make sure the rpath contains only unique directories.
+	      case $temp_rpath: in
+	      *"$absdir:"*) ;;
+	      *) func_append temp_rpath "$absdir:" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if $alldeplibs &&
+	     { test pass_all = "$deplibs_check_method" ||
+	       { test yes = "$build_libtool_libs" &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test built = "$use_static_libs" && test yes = "$installed"; then
+	  use_static_libs=no
+	fi
+	if test -n "$library_names" &&
+	   { test no = "$use_static_libs" || test -z "$old_library"; }; then
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc* | *os2*)
+	      # No point in relinking DLLs because paths are not encoded
+	      func_append notinst_deplibs " $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test no = "$installed"; then
+	      func_append notinst_deplibs " $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on some
+	  # systems (darwin).  Don't bleat about dlopened modules though!
+	  dlopenmodule=
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule=$dlpremoduletest
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
+	    echo
+	    if test prog = "$linkmode"; then
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $ECHO "*** $linklib is not portable!"
+	  fi
+	  if test lib = "$linkmode" &&
+	     test yes = "$hardcode_into_libs"; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    shift
+	    realname=$1
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname=$dlname
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw* | *cegcc* | *os2*)
+	        func_arith $current - $age
+		major=$func_arith_result
+		versuffix=-$major
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname=$realname
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot=$soname
+	    func_basename "$soroot"
+	    soname=$func_basename_result
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      func_verbose "extracting exported symbol list from '$soname'"
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      func_verbose "generating import library for '$soname'"
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test prog = "$linkmode" || test relink != "$opt_mode"; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test no = "$hardcode_direct"; then
+		add=$dir/$linklib
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
+		  *-*-sysv4*uw2*) add_dir=-L$dir ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir=-L$dir ;;
+		  *-*-darwin* )
+		    # if the lib is a (non-dlopened) module then we cannot
+		    # link against it, someone is ignoring the earlier warnings
+		    if /usr/bin/file -L $add 2> /dev/null |
+			 $GREP ": [^:]* bundle" >/dev/null; then
+		      if test "X$dlopenmodule" != "X$lib"; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+			if test -z "$old_library"; then
+			  echo
+			  echo "*** And there doesn't seem to be a static archive available"
+			  echo "*** The link will probably fail, sorry"
+			else
+			  add=$dir/$old_library
+			fi
+		      elif test -n "$old_library"; then
+			add=$dir/$old_library
+		      fi
+		    fi
+		esac
+	      elif test no = "$hardcode_minus_L"; then
+		case $host in
+		*-*-sunos*) add_shlibpath=$dir ;;
+		esac
+		add_dir=-L$dir
+		add=-l$name
+	      elif test no = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test yes = "$hardcode_direct" &&
+	         test no = "$hardcode_direct_absolute"; then
+		add=$dir/$linklib
+	      elif test yes = "$hardcode_minus_L"; then
+		add_dir=-L$absdir
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      func_append add_dir " -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add=-l$name
+	      elif test yes = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test yes != "$lib_linked"; then
+	      func_fatal_configuration "unsupported hardcode properties"
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test prog = "$linkmode"; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test yes != "$hardcode_direct" &&
+		 test yes != "$hardcode_minus_L" &&
+		 test yes = "$hardcode_shlibpath_var"; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) func_append finalize_shlibpath "$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test prog = "$linkmode" || test relink = "$opt_mode"; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test yes = "$hardcode_direct" &&
+	       test no = "$hardcode_direct_absolute"; then
+	      add=$libdir/$linklib
+	    elif test yes = "$hardcode_minus_L"; then
+	      add_dir=-L$libdir
+	      add=-l$name
+	    elif test yes = "$hardcode_shlibpath_var"; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) func_append finalize_shlibpath "$libdir:" ;;
+	      esac
+	      add=-l$name
+	    elif test yes = "$hardcode_automatic"; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib"; then
+		add=$inst_prefix_dir$libdir/$linklib
+	      else
+		add=$libdir/$linklib
+	      fi
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir=-L$libdir
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    func_append add_dir " -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add=-l$name
+	    fi
+
+	    if test prog = "$linkmode"; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test prog = "$linkmode"; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test unsupported != "$hardcode_direct"; then
+	    test -n "$old_library" && linklib=$old_library
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test yes = "$build_libtool_libs"; then
+	  # Not a shared library
+	  if test pass_all != "$deplibs_check_method"; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    echo
+	    $ECHO "*** Warning: This system cannot link to static lib archive $lib."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
+	    if test yes = "$module"; then
+	      echo "*** But as you try to build a module library, libtool will still create "
+	      echo "*** a static module, that should work as long as the dlopening application"
+	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		echo
+		echo "*** However, this would only work if libtool was able to extract symbol"
+		echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
+		echo "*** not find such a program.  So, this module is probably useless."
+		echo "*** 'nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test no = "$build_old_libs"; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test lib = "$linkmode"; then
+	  if test -n "$dependency_libs" &&
+	     { test yes != "$hardcode_into_libs" ||
+	       test yes = "$build_old_libs" ||
+	       test yes = "$link_static"; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) func_append xrpath " $temp_xrpath";;
+		   esac;;
+	      *) func_append temp_deplibs " $libdir";;
+	      esac
+	    done
+	    dependency_libs=$temp_deplibs
+	  fi
+
+	  func_append newlib_search_path " $absdir"
+	  # Link against this library
+	  test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    case $deplib in
+              -L*) func_stripname '-L' '' "$deplib"
+                   func_resolve_sysroot "$func_stripname_result";;
+              *) func_resolve_sysroot "$deplib" ;;
+            esac
+	    if $opt_preserve_dup_deps; then
+	      case "$tmp_libs " in
+	      *" $func_resolve_sysroot_result "*)
+                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $func_resolve_sysroot_result"
+	  done
+
+	  if test no != "$link_all_deplibs"; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      path=
+	      case $deplib in
+	      -L*) path=$deplib ;;
+	      *.la)
+	        func_resolve_sysroot "$deplib"
+	        deplib=$func_resolve_sysroot_result
+	        func_dirname "$deplib" "" "."
+		dir=$func_dirname_result
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    func_warning "cannot determine absolute directory name of '$dir'"
+		    absdir=$dir
+		  fi
+		  ;;
+		esac
+		if $GREP "^installed=no" $deplib > /dev/null; then
+		case $host in
+		*-*-darwin*)
+		  depdepl=
+		  eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names"; then
+		    for tmp in $deplibrary_names; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$absdir/$objdir/$depdepl"; then
+		      depdepl=$absdir/$objdir/$depdepl
+		      darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+                      if test -z "$darwin_install_name"; then
+                          darwin_install_name=`$OTOOL64 -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                      fi
+		      func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
+		      func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
+		      path=
+		    fi
+		  fi
+		  ;;
+		*)
+		  path=-L$absdir/$objdir
+		  ;;
+		esac
+		else
+		  eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "'$deplib' is not a valid libtool archive"
+		  test "$absdir" != "$libdir" && \
+		    func_warning "'$deplib' seems to be moved"
+
+		  path=-L$absdir
+		fi
+		;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      if test link = "$pass"; then
+	if test prog = "$linkmode"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+      fi
+      dependency_libs=$newdependency_libs
+      if test dlpreopen = "$pass"; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test dlopen != "$pass"; then
+	test conv = "$pass" || {
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) func_append lib_search_path " $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	}
+
+	if test prog,link = "$linkmode,$pass"; then
+	  vars="compile_deplibs finalize_deplibs"
+	else
+	  vars=deplibs
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) func_append tmp_libs " $deplib" ;;
+	      esac
+	      ;;
+	    *) func_append tmp_libs " $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+
+      # Add Sun CC postdeps if required:
+      test CXX = "$tagname" && {
+        case $host_os in
+        linux*)
+          case `$CC -V 2>&1 | $SED 5q` in
+          *Sun\ C*) # Sun C++ 5.9
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+
+        solaris*)
+          func_cc_basename "$CC"
+          case $func_cc_basename_result in
+          CC* | sunCC*)
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+        esac
+      }
+
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=
+	  ;;
+	esac
+	if test -n "$i"; then
+	  func_append tmp_libs " $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test prog = "$linkmode"; then
+      dlfiles=$newdlfiles
+    fi
+    if test prog = "$linkmode" || test lib = "$linkmode"; then
+      dlprefiles=$newdlprefiles
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for archives"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "'-l' and '-L' are ignored for archives" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "'-rpath' is ignored for archives"
+
+      test -n "$xrpath" && \
+	func_warning "'-R' is ignored for archives"
+
+      test -n "$vinfo" && \
+	func_warning "'-version-info/-version-number' is ignored for archives"
+
+      test -n "$release" && \
+	func_warning "'-release' is ignored for archives"
+
+      test -n "$export_symbols$export_symbols_regex" && \
+	func_warning "'-export-symbols' is ignored for archives"
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs=$output
+      func_append objs "$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form 'libNAME.la'.
+      case $outputname in
+      lib*)
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
+	eval shared_ext=\"$shrext_cmds\"
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	test no = "$module" \
+	  && func_fatal_help "libtool library '$output' must begin with 'lib'"
+
+	if test no != "$need_lib_prefix"; then
+	  # Add the "lib" prefix for modules if required
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
+	  eval shared_ext=\"$shrext_cmds\"
+	  eval libname=\"$libname_spec\"
+	else
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test pass_all != "$deplibs_check_method"; then
+	  func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
+	else
+	  echo
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** objects $objs is not portable!"
+	  func_append libobjs " $objs"
+	fi
+      fi
+
+      test no = "$dlself" \
+	|| func_warning "'-dlopen self' is ignored for libtool libraries"
+
+      set dummy $rpath
+      shift
+      test 1 -lt "$#" \
+	&& func_warning "ignoring multiple '-rpath's for a libtool library"
+
+      install_libdir=$1
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test yes = "$build_libtool_libs"; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a '.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	test -n "$vinfo" && \
+	  func_warning "'-version-info/-version-number' is ignored for convenience libraries"
+
+	test -n "$release" && \
+	  func_warning "'-release' is ignored for convenience libraries"
+      else
+
+	# Parse the version information argument.
+	save_ifs=$IFS; IFS=:
+	set dummy $vinfo 0 0 0
+	shift
+	IFS=$save_ifs
+
+	test -n "$7" && \
+	  func_fatal_help "too many parameters to '-version-info'"
+
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major=$1
+	  number_minor=$2
+	  number_revision=$3
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # that has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  # correct linux to gnu/linux during the next big refactor
+	  darwin|freebsd-elf|linux|midnightbsd-elf|osf|windows|none)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age=$number_minor
+	    revision=$number_revision
+	    ;;
+	  freebsd-aout|qnx|sunos)
+	    current=$number_major
+	    revision=$number_minor
+	    age=0
+	    ;;
+	  irix|nonstopux)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age=$number_minor
+	    revision=$number_minor
+	    lt_irix_increment=no
+	    ;;
+	  *)
+	    func_fatal_configuration "$modename: unknown library version type '$version_type'"
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current=$1
+	  revision=$2
+	  age=$3
+	  ;;
+	esac
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "CURRENT '$current' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "REVISION '$revision' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "AGE '$age' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	if test "$age" -gt "$current"; then
+	  func_error "AGE '$age' is greater than the current interface number '$current'"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
+	  # Darwin ld doesn't like 0 for these options...
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
+	  xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+          # On Darwin other compilers
+          case $CC in
+              nagfor*)
+                  verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+                  ;;
+              *)
+                  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+                  ;;
+          esac
+	  ;;
+
+	freebsd-aout)
+	  major=.$current
+	  versuffix=.$current.$revision
+	  ;;
+
+	freebsd-elf | midnightbsd-elf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
+	  ;;
+
+	irix | nonstopux)
+	  if test no = "$lt_irix_increment"; then
+	    func_arith $current - $age
+	  else
+	    func_arith $current - $age + 1
+	  fi
+	  major=$func_arith_result
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring=$verstring_prefix$major.$revision
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test 0 -ne "$loop"; do
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring=$verstring_prefix$major.$iface:$verstring
+	  done
+
+	  # Before this point, $major must not contain '.'.
+	  major=.$major
+	  versuffix=$major.$revision
+	  ;;
+
+	linux) # correct to gnu/linux during the next big refactor
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
+	  ;;
+
+	osf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=.$current.$age.$revision
+	  verstring=$current.$age.$revision
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test 0 -ne "$loop"; do
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring=$verstring:$iface.0
+	  done
+
+	  # Make executables depend on our current version.
+	  func_append verstring ":$current.0"
+	  ;;
+
+	qnx)
+	  major=.$current
+	  versuffix=.$current
+	  ;;
+
+	sco)
+	  major=.$current
+	  versuffix=.$current
+	  ;;
+
+	sunos)
+	  major=.$current
+	  versuffix=.$current.$revision
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 file systems.
+	  func_arith $current - $age
+	  major=$func_arith_result
+	  versuffix=-$major
+	  ;;
+
+	*)
+	  func_fatal_configuration "unknown library version type '$version_type'"
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring=0.0
+	    ;;
+	  esac
+	  if test no = "$need_version"; then
+	    versuffix=
+	  else
+	    versuffix=.0.0
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test yes,no = "$avoid_version,$need_version"; then
+	  major=
+	  versuffix=
+	  verstring=
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test yes = "$allow_undefined"; then
+	  if test unsupported = "$allow_undefined_flag"; then
+	    if test yes = "$build_old_libs"; then
+	      func_warning "undefined symbols not allowed in $host shared libraries; building static only"
+	      build_libtool_libs=no
+	    else
+	      func_fatal_error "can't build $host shared library unless -no-undefined is specified"
+	    fi
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag=$no_undefined_flag
+	fi
+
+      fi
+
+      func_generate_dlsyms "$libname" "$libname" :
+      func_append libobjs " $symfileobj"
+      test " " = "$libobjs" && libobjs=
+
+      if test relink != "$opt_mode"; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$ECHO "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext | *.gcno)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
+	       if test -n "$precious_files_regex"; then
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 then
+		   continue
+		 fi
+	       fi
+	       func_append removelist " $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	test -n "$removelist" && \
+	  func_show_eval "${RM}r \$removelist"
+      fi
+
+      # Now set the variables for building old libraries.
+      if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
+	func_append oldlibs " $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      #for path in $notinst_path; do
+      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+      #done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  func_replace_sysroot "$libdir"
+	  func_append temp_xrpath " -R$func_replace_sysroot_result"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+	if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles=$dlfiles
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) func_append dlfiles " $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles=$dlprefiles
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) func_append dlprefiles " $lib" ;;
+	esac
+      done
+
+      if test yes = "$build_libtool_libs"; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    func_append deplibs " System.ltframework"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-midnightbsd*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test yes = "$build_libtool_need_lc"; then
+	      func_append deplibs " -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=
+	versuffix=
+	major=
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behavior.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $opt_dry_run || $RM conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $opt_dry_run || $RM conftest
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    func_append newdeplibs " $i"
+		    i=
+		    ;;
+		  esac
+		fi
+		if test -n "$i"; then
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		  set dummy $deplib_matches; shift
+		  deplib_match=$1
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+		    func_append newdeplibs " $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which I believe you do not have"
+		    echo "*** because a test_compile did reveal that the linker did not use it for"
+		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  else
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		$opt_dry_run || $RM conftest
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+		  ldd_output=`ldd conftest`
+		  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      func_append newdeplibs " $i"
+		      i=
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i"; then
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		    set dummy $deplib_matches; shift
+		    deplib_match=$1
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+		      func_append newdeplibs " $i"
+		    else
+		      droppeddeps=yes
+		      echo
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		      echo "*** I have the capability to make that library automatically link in when"
+		      echo "*** you link to this library.  But I can only do this if you have a"
+		      echo "*** shared version of the library, which you do not appear to have"
+		      echo "*** because a test_compile did reveal that the linker did not use this one"
+		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "*** make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method; shift
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib"; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		if test -n "$file_magic_glob"; then
+		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+		else
+		  libnameglob=$libname
+		fi
+		test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  if test yes = "$want_nocaseglob"; then
+		    shopt -s nocaseglob
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		    $nocaseglob
+		  else
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		  fi
+		  for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null |
+			 $GREP " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib=$potent_lib
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
+			*) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+			 $SED -e 10q |
+			 $EGREP "$file_magic_regex" > /dev/null; then
+			func_append newdeplibs " $a_deplib"
+			a_deplib=
+			break 2
+		      fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib"; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib"; then
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method; shift
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib"; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib=$potent_lib # see symlink-check above in file_magic test
+		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
+		      func_append newdeplibs " $a_deplib"
+		      a_deplib=
+		      break 2
+		    fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib"; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib"; then
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=
+	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+	  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	    for i in $predeps $postdeps; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
+	    done
+	  fi
+	  case $tmp_deplibs in
+	  *[!\	\ ]*)
+	    echo
+	    if test none = "$deplibs_check_method"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	    ;;
+	  esac
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library with the System framework
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+	  ;;
+	esac
+
+	if test yes = "$droppeddeps"; then
+	  if test yes = "$module"; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** 'nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test no = "$build_old_libs"; then
+	      oldlibs=$output_objdir/$libname.$libext
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+
+	    if test no = "$allow_undefined"; then
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
+	      if test no = "$build_old_libs"; then
+		oldlibs=$output_objdir/$libname.$libext
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+      case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+      esac
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      deplibs=$new_libs
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test yes = "$build_libtool_libs"; then
+	# Remove $wl instances when linking with ld.
+	# FIXME: should test the right _cmds variable.
+	case $archive_cmds in
+	  *\$LD\ *) wl= ;;
+        esac
+	if test yes = "$hardcode_into_libs"; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath=$finalize_rpath
+	  test relink = "$opt_mode" || rpath=$compile_rpath$rpath
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		func_replace_sysroot "$libdir"
+		libdir=$func_replace_sysroot_result
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs=$libdir
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		func_append dep_rpath " $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append perm_rpath " $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir=$hardcode_libdirs
+	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      func_append rpath "$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath=$finalize_shlibpath
+	test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	shift
+	realname=$1
+	shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname=$realname
+	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
+
+	lib=$output_objdir/$realname
+	linknames=
+	for link
+	do
+	  func_append linknames " $link"
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
+
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols=$output_objdir/$libname.uexp
+	  func_append delfiles " $export_symbols"
+	fi
+
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    func_dll_def_p "$export_symbols" || {
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols=$export_symbols
+	      export_symbols=
+	      always_export_symbols=yes
+	    }
+	  fi
+	  ;;
+	esac
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for '$libname.la'"
+	    export_symbols=$output_objdir/$libname.exp
+	    $opt_dry_run || $RM $export_symbols
+	    cmds=$export_symbols_cmds
+	    save_ifs=$IFS; IFS='~'
+	    for cmd1 in $cmds; do
+	      IFS=$save_ifs
+	      # Take the normal branch if the nm_file_list_spec branch
+	      # doesn't work or if tool conversion is not needed.
+	      case $nm_file_list_spec~$to_tool_file_cmd in
+		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+		  try_normal_branch=yes
+		  eval cmd=\"$cmd1\"
+		  func_len " $cmd"
+		  len=$func_len_result
+		  ;;
+		*)
+		  try_normal_branch=no
+		  ;;
+	      esac
+	      if test yes = "$try_normal_branch" \
+		 && { test "$len" -lt "$max_cmd_len" \
+		      || test "$max_cmd_len" -le -1; }
+	      then
+		func_show_eval "$cmd" 'exit $?'
+		skipped_export=false
+	      elif test -n "$nm_file_list_spec"; then
+		func_basename "$output"
+		output_la=$func_basename_result
+		save_libobjs=$libobjs
+		save_output=$output
+		output=$output_objdir/$output_la.nm
+		func_to_tool_file "$output"
+		libobjs=$nm_file_list_spec$func_to_tool_file_result
+		func_append delfiles " $output"
+		func_verbose "creating $NM input file list: $output"
+		for obj in $save_libobjs; do
+		  func_to_tool_file "$obj"
+		  $ECHO "$func_to_tool_file_result"
+		done > "$output"
+		eval cmd=\"$cmd1\"
+		func_show_eval "$cmd" 'exit $?'
+		output=$save_output
+		libobjs=$save_libobjs
+		skipped_export=false
+	      else
+		# The command line is too long to execute in one step.
+		func_verbose "using reloadable object file for export list..."
+		skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
+	    done
+	    IFS=$save_ifs
+	    if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  tmp_export_symbols=$export_symbols
+	  test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
+	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	fi
+
+	if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands, which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	fi
+
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+	  case " $convenience " in
+	  *" $test_deplib "*) ;;
+	  *)
+	    func_append tmp_deplibs " $test_deplib"
+	    ;;
+	  esac
+	done
+	deplibs=$tmp_deplibs
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test yes = "$compiler_needs_object" &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  else
+	    gentop=$output_objdir/${outputname}x
+	    func_append generated " $gentop"
+
+	    func_extract_archives $gentop $convenience
+	    func_append libobjs " $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	fi
+
+	if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  func_append linker_flags " $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test relink = "$opt_mode"; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test yes = "$module" && test -n "$module_cmds"; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    eval test_cmds=\"$archive_expsym_cmds\"
+	    cmds=$archive_expsym_cmds
+	  else
+	    eval test_cmds=\"$archive_cmds\"
+	    cmds=$archive_cmds
+	  fi
+	fi
+
+	if test : != "$skipped_export" &&
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  func_basename "$output"
+	  output_la=$func_basename_result
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  last_robj=
+	  k=1
+
+	  if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
+	    output=$output_objdir/$output_la.lnkscript
+	    func_verbose "creating GNU ld script: $output"
+	    echo 'INPUT (' > $output
+	    for obj in $save_libobjs
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    echo ')' >> $output
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$func_to_tool_file_result
+	  elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
+	    output=$output_objdir/$output_la.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test yes = "$compiler_needs_object"; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-$k.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test -z "$objlist" ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test 1 -eq "$k"; then
+		    # The first file doesn't have a previous command to add.
+		    reload_objs=$objlist
+		    eval concat_cmds=\"$reload_cmds\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    reload_objs="$objlist $last_robj"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-$k.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-$k.$objext
+		  objlist=" $obj"
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      reload_objs="$objlist $last_robj"
+	      eval concat_cmds=\"\$concat_cmds$reload_cmds\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	      func_append delfiles " $output"
+
+	    else
+	      output=
+	    fi
+
+	    ${skipped_export-false} && {
+	      func_verbose "generating symbol list for '$libname.la'"
+	      export_symbols=$output_objdir/$libname.exp
+	      $opt_dry_run || $RM $export_symbols
+	      libobjs=$output
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	    }
+
+	    test -n "$save_libobjs" &&
+	      func_verbose "creating a temporary reloadable object file: $output"
+
+	    # Loop through the commands generated above and execute them.
+	    save_ifs=$IFS; IFS='~'
+	    for cmd in $concat_cmds; do
+	      IFS=$save_ifs
+	      $opt_quiet || {
+		  func_quote_arg expand,pretty "$cmd"
+		  eval "func_echo $func_quote_arg_result"
+	      }
+	      $opt_dry_run || eval "$cmd" || {
+		lt_exit=$?
+
+		# Restore the uninstalled library and exit
+		if test relink = "$opt_mode"; then
+		  ( cd "$output_objdir" && \
+		    $RM "${realname}T" && \
+		    $MV "${realname}U" "$realname" )
+		fi
+
+		exit $lt_exit
+	      }
+	    done
+	    IFS=$save_ifs
+
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+
+          ${skipped_export-false} && {
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols=$export_symbols
+	      test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
+	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands, which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  }
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test yes = "$module" && test -n "$module_cmds"; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	      cmds=$archive_expsym_cmds
+	    else
+	      cmds=$archive_cmds
+	    fi
+	  fi
+	fi
+
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop=$output_objdir/${outputname}x
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append libobjs " $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
+	fi
+
+	save_ifs=$IFS; IFS='~'
+	for cmd in $cmds; do
+	  IFS=$sp$nl
+	  eval cmd=\"$cmd\"
+	  IFS=$save_ifs
+	  $opt_quiet || {
+	    func_quote_arg expand,pretty "$cmd"
+	    eval "func_echo $func_quote_arg_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test relink = "$opt_mode"; then
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
+	    fi
+
+	    exit $lt_exit
+	  }
+	done
+	IFS=$save_ifs
+
+	# Restore the uninstalled library and exit
+	if test relink = "$opt_mode"; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      func_show_eval '${RM}r "$gentop"'
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test yes = "$module" || test yes = "$export_dynamic"; then
+	  # On all known operating systems, these are identical.
+	  dlname=$soname
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for objects"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "'-l' and '-L' are ignored for objects" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "'-rpath' is ignored for objects"
+
+      test -n "$xrpath" && \
+	func_warning "'-R' is ignored for objects"
+
+      test -n "$vinfo" && \
+	func_warning "'-version-info' is ignored for objects"
+
+      test -n "$release" && \
+	func_warning "'-release' is ignored for objects"
+
+      case $output in
+      *.lo)
+	test -n "$objs$old_deplibs" && \
+	  func_fatal_error "cannot build library object '$output' from non-libtool objects"
+
+	libobj=$output
+	func_lo2o "$libobj"
+	obj=$func_lo2o_result
+	;;
+      *)
+	libobj=
+	obj=$output
+	;;
+      esac
+
+      # Delete the old objects.
+      $opt_dry_run || $RM $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # if reload_cmds runs $LD directly, get rid of -Wl from
+      # whole_archive_flag_spec and hope we can get by with turning comma
+      # into space.
+      case $reload_cmds in
+        *\$LD[\ \$]*) wl= ;;
+      esac
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	  reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
+	else
+	  gentop=$output_objdir/${obj}x
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+	fi
+      fi
+
+      # If we're not building shared, we need to use non_pic_objs
+      test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
+
+      # Create the old-style object.
+      reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
+
+      output=$obj
+      func_execute_cmds "$reload_cmds" 'exit $?'
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      test yes = "$build_libtool_libs" || {
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
+      }
+
+      if test -n "$pic_flag" || test default != "$pic_mode"; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output=$libobj
+	func_execute_cmds "$reload_cmds" 'exit $?'
+      fi
+
+      if test -n "$gentop"; then
+	func_show_eval '${RM}r "$gentop"'
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
+      esac
+      test -n "$vinfo" && \
+	func_warning "'-version-info' is ignored for programs"
+
+      test -n "$release" && \
+	func_warning "'-release' is ignored for programs"
+
+      $preload \
+	&& test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
+	&& func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	;;
+      esac
+
+      case $host in
+      *-*-darwin*)
+	# Don't allow lazy linking, it breaks C++ global constructors
+	# But is supposedly fixed on 10.4 or later (yay!).
+	if test CXX = "$tagname"; then
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+	    10.[0123])
+	      func_append compile_command " $wl-bind_at_load"
+	      func_append finalize_command " $wl-bind_at_load"
+	    ;;
+	  esac
+	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      compile_deplibs=$new_libs
+
+
+      func_append compile_command " $compile_deplibs"
+      func_append finalize_command " $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs=$libdir
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append perm_rpath " $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
+	  *) func_append dllsearchpath ":$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir=$hardcode_libdirs
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath=$rpath
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs=$libdir
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_perm_rpath " $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir=$hardcode_libdirs
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath=$rpath
+
+      if test -n "$libobjs" && test yes = "$build_old_libs"; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+      fi
+
+      func_generate_dlsyms "$outputname" "@PROGRAM@" false
+
+      # template prelinking step
+      if test -n "$prelink_cmds"; then
+	func_execute_cmds "$prelink_cmds" 'exit $?'
+      fi
+
+      wrappers_required=:
+      case $host in
+      *cegcc* | *mingw32ce*)
+        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+        wrappers_required=false
+        ;;
+      *cygwin* | *mingw* )
+        test yes = "$build_libtool_libs" || wrappers_required=false
+        ;;
+      *)
+        if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+          wrappers_required=false
+        fi
+        ;;
+      esac
+      $wrappers_required || {
+	# Replace the output file specification.
+	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	link_command=$compile_command$compile_rpath
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	# Delete the generated files.
+	if test -f "$output_objdir/${outputname}S.$objext"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
+	fi
+
+	exit $exit_status
+      }
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test yes = "$no_install"; then
+	# We don't need to create a wrapper script.
+	link_command=$compile_var$compile_command$compile_rpath
+	# Replace the output file specification.
+	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$opt_dry_run || $RM $output
+	# Link the executable and exit
+	func_show_eval "$link_command" 'exit $?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      case $hardcode_action,$fast_install in
+        relink,*)
+	  # Fast installation is not supported
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
+
+	  func_warning "this platform does not like uninstalled shared libraries"
+	  func_warning "'$output' will be relinked during installation"
+	  ;;
+        *,yes)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+          ;;
+	*,no)
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
+          ;;
+	*,needless)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=
+          ;;
+      esac
+
+      # Replace the output file specification.
+      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      func_show_eval "$link_command" 'exit $?'
+
+      if test -n "$postlink_cmds"; then
+	func_to_tool_file "$output_objdir/$outputname"
+	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	func_execute_cmds "$postlink_cmds" 'exit $?'
+      fi
+
+      # Now create the wrapper script.
+      func_verbose "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    func_quote_arg pretty "$var_value"
+	    relink_command="$var=$func_quote_arg_result; export $var; $relink_command"
+	  fi
+	done
+	func_quote eval cd "`pwd`"
+	func_quote_arg pretty,unquoted "($func_quote_result; $relink_command)"
+	relink_command=$func_quote_arg_unquoted_result
+      fi
+
+      # Only actually do things if not in dry run mode.
+      $opt_dry_run || {
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
+	  *) exeext= ;;
+	esac
+	case $host in
+	  *cygwin* | *mingw* )
+	    func_dirname_and_basename "$output" "" "."
+	    output_name=$func_basename_result
+	    output_path=$func_dirname_result
+	    cwrappersource=$output_path/$objdir/lt-$output_name.c
+	    cwrapper=$output_path/$output_name.exe
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_cwrapperexe_src > $cwrappersource
+
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+	      $STRIP $cwrapper
+	    }
+
+	    # Now, create the wrapper script for func_source use:
+	    func_ltwrapper_scriptname $cwrapper
+	    $RM $func_ltwrapper_scriptname_result
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+	    $opt_dry_run || {
+	      # note: this script will not be executed, so do not chmod.
+	      if test "x$build" = "x$host"; then
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+	      else
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+	      fi
+	    }
+	  ;;
+	  * )
+	    $RM $output
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_wrapper no > $output
+	    chmod +x $output
+	  ;;
+	esac
+      }
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      case $build_libtool_libs in
+        convenience)
+	  oldobjs="$libobjs_save $symfileobj"
+	  addlibs=$convenience
+	  build_libtool_libs=no
+	  ;;
+	module)
+	  oldobjs=$libobjs_save
+	  addlibs=$old_convenience
+	  build_libtool_libs=no
+          ;;
+	*)
+	  oldobjs="$old_deplibs $non_pic_objects"
+	  $preload && test -f "$symfileobj" \
+	    && func_append oldobjs " $symfileobj"
+	  addlibs=$old_convenience
+	  ;;
+      esac
+
+      if test -n "$addlibs"; then
+	gentop=$output_objdir/${outputname}x
+	func_append generated " $gentop"
+
+	func_extract_archives $gentop $addlibs
+	func_append oldobjs " $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
+	cmds=$old_archive_from_new_cmds
+      else
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop=$output_objdir/${outputname}x
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append oldobjs " $func_extract_archives_result"
+	fi
+
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  echo "copying selected object files to avoid basename conflicts..."
+	  gentop=$output_objdir/${outputname}x
+	  func_append generated " $gentop"
+	  func_mkdir_p "$gentop"
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    func_basename "$obj"
+	    objbase=$func_basename_result
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		func_arith $counter + 1
+		counter=$func_arith_result
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      func_append oldobjs " $gentop/$newobj"
+	      ;;
+	    *) func_append oldobjs " $obj" ;;
+	    esac
+	  done
+	fi
+	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+	tool_oldlib=$func_to_tool_file_result
+	eval cmds=\"$old_archive_cmds\"
+
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	elif test -n "$archiver_list_spec"; then
+	  func_verbose "using command file archive linking..."
+	  for obj in $oldobjs
+	  do
+	    func_to_tool_file "$obj"
+	    $ECHO "$func_to_tool_file_result"
+	  done > $output_objdir/$libname.libcmd
+	  func_to_tool_file "$output_objdir/$libname.libcmd"
+	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  func_verbose "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
+	  for obj in $save_oldobjs
+	  do
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj"; then
+		RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
+	      objlist=
+	      len=$len0
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test -z "$oldobjs"; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
+      fi
+      func_execute_cmds "$cmds" 'exit $?'
+    done
+
+    test -n "$generated" && \
+      func_show_eval "${RM}r$generated"
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test yes = "$build_old_libs" && old_library=$libname.$libext
+      func_verbose "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  func_quote_arg pretty,unquoted "$var_value"
+	  relink_command="$var=$func_quote_arg_unquoted_result; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      func_quote eval cd "`pwd`"
+      relink_command="($func_quote_result; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      func_quote_arg pretty,unquoted "$relink_command"
+      relink_command=$func_quote_arg_unquoted_result
+      if test yes = "$hardcode_automatic"; then
+	relink_command=
+      fi
+
+      # Only create the output if not a dry run.
+      $opt_dry_run || {
+	for installed in no yes; do
+	  if test yes = "$installed"; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output=$output_objdir/${outputname}i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		func_basename "$deplib"
+		name=$func_basename_result
+		func_resolve_sysroot "$deplib"
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+		test -z "$libdir" && \
+		  func_fatal_error "'$deplib' is not a valid libtool archive"
+		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      -L*)
+		func_stripname -L '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -L$func_replace_sysroot_result"
+		;;
+	      -R*)
+		func_stripname -R '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -R$func_replace_sysroot_result"
+		;;
+	      *) func_append newdependency_libs " $deplib" ;;
+	      esac
+	    done
+	    dependency_libs=$newdependency_libs
+	    newdlfiles=
+
+	    for lib in $dlfiles; do
+	      case $lib in
+	      *.la)
+	        func_basename "$lib"
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "'$lib' is not a valid libtool archive"
+		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      *) func_append newdlfiles " $lib" ;;
+	      esac
+	    done
+	    dlfiles=$newdlfiles
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+	      *.la)
+		# Only pass preopened files to the pseudo-archive (for
+		# eventual linking with the app. that links it) if we
+		# didn't already link the preopened objects directly into
+		# the library:
+		func_basename "$lib"
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "'$lib' is not a valid libtool archive"
+		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      esac
+	    done
+	    dlprefiles=$newdlprefiles
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlfiles " $abs"
+	    done
+	    dlfiles=$newdlfiles
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlprefiles " $abs"
+	    done
+	    dlprefiles=$newdlprefiles
+	  fi
+	  $RM $output
+	  # place dlname in correct position for cygwin
+	  # In fact, it would be nice if we could use this code for all target
+	  # systems that can't hard-code library paths into their executables
+	  # and that have no shared library path variable independent of PATH,
+	  # but it turns out we can't easily determine that from inspecting
+	  # libtool variables, so we have to hard-code the OSs to which it
+	  # applies here; at the moment, that means platforms that use the PE
+	  # object format with DLL files.  See the long comment at the top of
+	  # tests/bindir.at for full details.
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+	      # If a -bindir argument was supplied, place the dll there.
+	      if test -n "$bindir"; then
+		func_relative_path "$install_libdir" "$bindir"
+		tdlname=$func_relative_path_result/$dlname
+	      else
+		# Otherwise fall back on heuristic.
+		tdlname=../bin/$dlname
+	      fi
+	      ;;
+	  esac
+	  $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that cannot go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test no,yes = "$installed,$need_relink"; then
+	    $ECHO >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      }
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+}
+
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+  func_mode_link ${1+"$@"}
+fi
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+    $debug_cmd
+
+    RM=$nonopt
+    files=
+    rmforce=false
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic=$magic
+
+    for arg
+    do
+      case $arg in
+      -f) func_append RM " $arg"; rmforce=: ;;
+      -*) func_append RM " $arg" ;;
+      *) func_append files " $arg" ;;
+      esac
+    done
+
+    test -z "$RM" && \
+      func_fatal_help "you must specify an RM program"
+
+    rmdirs=
+
+    for file in $files; do
+      func_dirname "$file" "" "."
+      dir=$func_dirname_result
+      if test . = "$dir"; then
+	odir=$objdir
+      else
+	odir=$dir/$objdir
+      fi
+      func_basename "$file"
+      name=$func_basename_result
+      test uninstall = "$opt_mode" && odir=$dir
+
+      # Remember odir for removal later, being careful to avoid duplicates
+      if test clean = "$opt_mode"; then
+	case " $rmdirs " in
+	  *" $odir "*) ;;
+	  *) func_append rmdirs " $odir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if { test -L "$file"; } >/dev/null 2>&1 ||
+	 { test -h "$file"; } >/dev/null 2>&1 ||
+	 test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif $rmforce; then
+	continue
+      fi
+
+      rmfiles=$file
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if func_lalib_p "$file"; then
+	  func_source $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    func_append rmfiles " $odir/$n"
+	  done
+	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+	  case $opt_mode in
+	  clean)
+	    case " $library_names " in
+	    *" $dlname "*) ;;
+	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+	    esac
+	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+	    ;;
+	  uninstall)
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	    ;;
+	  esac
+	fi
+	;;
+
+      *.lo)
+	# Possibly a libtool object, so verify it.
+	if func_lalib_p "$file"; then
+
+	  # Read the .lo file
+	  func_source $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" && test none != "$pic_object"; then
+	    func_append rmfiles " $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" && test none != "$non_pic_object"; then
+	    func_append rmfiles " $dir/$non_pic_object"
+	  fi
+	fi
+	;;
+
+      *)
+	if test clean = "$opt_mode"; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    func_stripname '' '.exe' "$file"
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    func_append rmfiles " $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if func_ltwrapper_p "$file"; then
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      func_append rmfiles " $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
+
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+	    if test yes = "$fast_install" && test -n "$relink_command"; then
+	      func_append rmfiles " $odir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name"; then
+	      func_append rmfiles " $odir/lt-$noexename.c"
+	    fi
+	  fi
+	fi
+	;;
+      esac
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
+    done
+
+    # Try to remove the $objdir's in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
+      fi
+    done
+
+    exit $exit_status
+}
+
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+  func_mode_uninstall ${1+"$@"}
+fi
+
+test -z "$opt_mode" && {
+  help=$generic_help
+  func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+  func_fatal_help "invalid operation mode '$opt_mode'"
+
+if test -n "$exec_cmd"; then
+  eval exec "$exec_cmd"
+  exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# where we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/build-aux/missing b/build-aux/missing
new file mode 100755
index 0000000..1fe1611
--- /dev/null
+++ b/build-aux/missing
@@ -0,0 +1,215 @@
+#! /bin/sh
+# Common wrapper for a few potentially missing GNU programs.
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 1996-2021 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try '$0 --help' for more information"
+  exit 1
+fi
+
+case $1 in
+
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
+
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+
+Supported PROGRAM values:
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=https://www.perl.org/
+flex_URL=https://github.com/westes/flex
+gnu_software_URL=https://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
+      ;;
+   autom4te*)
+      echo "You might have modified some maintainer files that require"
+      echo "the 'autom4te' program to be rebuilt."
+      program_details 'autom4te'
+      ;;
+    bison*|yacc*)
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
+      ;;
+    lex*|flex*)
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
+      ;;
+    help2man*)
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
+    ;;
+    makeinfo*)
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
+      ;;
+  esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/build-aux/test-driver b/build-aux/test-driver
new file mode 100755
index 0000000..be73b80
--- /dev/null
+++ b/build-aux/test-driver
@@ -0,0 +1,153 @@
+#! /bin/sh
+# test-driver - basic testsuite driver script.
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 2011-2021 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+# Make unconditional expansion of undefined variables an error.  This
+# helps a lot in preventing typo-related bugs.
+set -u
+
+usage_error ()
+{
+  echo "$0: $*" >&2
+  print_usage >&2
+  exit 2
+}
+
+print_usage ()
+{
+  cat <<END
+Usage:
+  test-driver --test-name NAME --log-file PATH --trs-file PATH
+              [--expect-failure {yes|no}] [--color-tests {yes|no}]
+              [--enable-hard-errors {yes|no}] [--]
+              TEST-SCRIPT [TEST-SCRIPT-ARGUMENTS]
+
+The '--test-name', '--log-file' and '--trs-file' options are mandatory.
+See the GNU Automake documentation for information.
+END
+}
+
+test_name= # Used for reporting.
+log_file=  # Where to save the output of the test script.
+trs_file=  # Where to save the metadata of the test run.
+expect_failure=no
+color_tests=no
+enable_hard_errors=yes
+while test $# -gt 0; do
+  case $1 in
+  --help) print_usage; exit $?;;
+  --version) echo "test-driver $scriptversion"; exit $?;;
+  --test-name) test_name=$2; shift;;
+  --log-file) log_file=$2; shift;;
+  --trs-file) trs_file=$2; shift;;
+  --color-tests) color_tests=$2; shift;;
+  --expect-failure) expect_failure=$2; shift;;
+  --enable-hard-errors) enable_hard_errors=$2; shift;;
+  --) shift; break;;
+  -*) usage_error "invalid option: '$1'";;
+   *) break;;
+  esac
+  shift
+done
+
+missing_opts=
+test x"$test_name" = x && missing_opts="$missing_opts --test-name"
+test x"$log_file"  = x && missing_opts="$missing_opts --log-file"
+test x"$trs_file"  = x && missing_opts="$missing_opts --trs-file"
+if test x"$missing_opts" != x; then
+  usage_error "the following mandatory options are missing:$missing_opts"
+fi
+
+if test $# -eq 0; then
+  usage_error "missing argument"
+fi
+
+if test $color_tests = yes; then
+  # Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'.
+  red='' # Red.
+  grn='' # Green.
+  lgn='' # Light green.
+  blu='' # Blue.
+  mgn='' # Magenta.
+  std=''     # No color.
+else
+  red= grn= lgn= blu= mgn= std=
+fi
+
+do_exit='rm -f $log_file $trs_file; (exit $st); exit $st'
+trap "st=129; $do_exit" 1
+trap "st=130; $do_exit" 2
+trap "st=141; $do_exit" 13
+trap "st=143; $do_exit" 15
+
+# Test script is run here. We create the file first, then append to it,
+# to ameliorate tests themselves also writing to the log file. Our tests
+# don't, but others can (automake bug#35762).
+: >"$log_file"
+"$@" >>"$log_file" 2>&1
+estatus=$?
+
+if test $enable_hard_errors = no && test $estatus -eq 99; then
+  tweaked_estatus=1
+else
+  tweaked_estatus=$estatus
+fi
+
+case $tweaked_estatus:$expect_failure in
+  0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
+  0:*)   col=$grn res=PASS  recheck=no  gcopy=no;;
+  77:*)  col=$blu res=SKIP  recheck=no  gcopy=yes;;
+  99:*)  col=$mgn res=ERROR recheck=yes gcopy=yes;;
+  *:yes) col=$lgn res=XFAIL recheck=no  gcopy=yes;;
+  *:*)   col=$red res=FAIL  recheck=yes gcopy=yes;;
+esac
+
+# Report the test outcome and exit status in the logs, so that one can
+# know whether the test passed or failed simply by looking at the '.log'
+# file, without the need of also peaking into the corresponding '.trs'
+# file (automake bug#11814).
+echo "$res $test_name (exit status: $estatus)" >>"$log_file"
+
+# Report outcome to console.
+echo "${col}${res}${std}: $test_name"
+
+# Register the test result, and other relevant metadata.
+echo ":test-result: $res" > $trs_file
+echo ":global-test-result: $res" >> $trs_file
+echo ":recheck: $recheck" >> $trs_file
+echo ":copy-in-global-log: $gcopy" >> $trs_file
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/build/.gitignore b/build/.gitignore
deleted file mode 100644
index 5e7d273..0000000
--- a/build/.gitignore
+++ /dev/null
@@ -1,4 +0,0 @@
-# Ignore everything in this directory
-*
-# Except this file
-!.gitignore
diff --git a/config.h.in b/config.h.in
new file mode 100644
index 0000000..9dd06d1
--- /dev/null
+++ b/config.h.in
@@ -0,0 +1,100 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define to 1 if you have the declaration of `strerror_r', and to 0 if you
+   don't. */
+#undef HAVE_DECL_STRERROR_R
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define if type __int128 is supported */
+#undef HAVE_INT128
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `pthread' library (-lpthread). */
+#undef HAVE_LIBPTHREAD
+
+/* Define to 1 if you have the `rt' library (-lrt). */
+#undef HAVE_LIBRT
+
+/* Define if numeric limits specialization exists for __int128 */
+#undef HAVE_NUMERIC_LIMITS128
+
+/* Define to 1 if the system has the type `ptrdiff_t'. */
+#undef HAVE_PTRDIFF_T
+
+/* Define to 1 if stdbool.h conforms to C99. */
+#undef HAVE_STDBOOL_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdio.h> header file. */
+#undef HAVE_STDIO_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define if you have `strerror_r'. */
+#undef HAVE_STRERROR_R
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if the system has the type `_Bool'. */
+#undef HAVE__BOOL
+
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
+#undef LT_OBJDIR
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if all of the C90 standard headers exist (not just the ones
+   required in a freestanding environment). This macro is provided for
+   backward compatibility; new code need not use it. */
+#undef STDC_HEADERS
+
+/* Define to 1 if strerror_r returns char *. */
+#undef STRERROR_R_CHAR_P
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t
+
+/* Define to `int' if <sys/types.h> does not define. */
+#undef ssize_t
diff --git a/configure b/configure
new file mode 100755
index 0000000..914adb9
--- /dev/null
+++ b/configure
@@ -0,0 +1,20428 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.71 for quorum 1.1.2.
+#
+# Report bugs to <gmarcais@cs.cmu.edu>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2017, 2020-2021 Free Software Foundation,
+# Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+as_nop=:
+if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else $as_nop
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+
+# Reset variables that may have inherited troublesome values from
+# the environment.
+
+# IFS needs to be set, to space, tab, and newline, in precisely that order.
+# (If _AS_PATH_WALK were called with IFS unset, it would have the
+# side effect of setting IFS to empty, thus disabling word splitting.)
+# Quoting is to prevent editors from complaining about space-tab.
+as_nl='
+'
+export as_nl
+IFS=" ""	$as_nl"
+
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# Ensure predictable behavior from utilities with locale-dependent output.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# We cannot yet rely on "unset" to work, but we need these variables
+# to be unset--not just set to an empty or harmless value--now, to
+# avoid bugs in old shells (e.g. pre-3.0 UWIN ksh).  This construct
+# also avoids known problems related to "unset" and subshell syntax
+# in other old shells (e.g. bash 2.01 and pdksh 5.2.14).
+for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH
+do eval test \${$as_var+y} \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+
+# Ensure that fds 0, 1, and 2 are open.
+if (exec 3>&0) 2>/dev/null; then :; else exec 0</dev/null; fi
+if (exec 3>&1) 2>/dev/null; then :; else exec 1>/dev/null; fi
+if (exec 3>&2)            ; then :; else exec 2>/dev/null; fi
+
+# The user is always right.
+if ${PATH_SEPARATOR+false} :; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    test -r "$as_dir$0" && as_myself=$as_dir$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="as_nop=:
+if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else \$as_nop
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" )
+then :
+
+else \$as_nop
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+blah=\$(echo \$(echo blah))
+test x\"\$blah\" = xblah || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null
+then :
+  as_have_required=yes
+else $as_nop
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null
+then :
+
+else $as_nop
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    as_run=a "$as_shell" -c "$as_bourne_compatible""$as_required" 2>/dev/null
+then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if as_run=a "$as_shell" -c "$as_bourne_compatible""$as_suggested" 2>/dev/null
+then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+IFS=$as_save_IFS
+if $as_found
+then :
+
+else $as_nop
+  if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      as_run=a "$SHELL" -c "$as_bourne_compatible""$as_required" 2>/dev/null
+then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi
+fi
+
+
+      if test "x$CONFIG_SHELL" != x
+then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno
+then :
+  printf "%s\n" "$0: This script requires a shell more modern than all"
+  printf "%s\n" "$0: the shells that I found on your system."
+  if test ${ZSH_VERSION+y} ; then
+    printf "%s\n" "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    printf "%s\n" "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    printf "%s\n" "$0: Please tell bug-autoconf@gnu.org and
+$0: gmarcais@cs.cmu.edu about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+# as_fn_nop
+# ---------
+# Do nothing but, unlike ":", preserve the value of $?.
+as_fn_nop ()
+{
+  return $?
+}
+as_nop=as_fn_nop
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null
+then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else $as_nop
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null
+then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else $as_nop
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+# as_fn_nop
+# ---------
+# Do nothing but, unlike ":", preserve the value of $?.
+as_fn_nop ()
+{
+  return $?
+}
+as_nop=as_fn_nop
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  printf "%s\n" "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { printf "%s\n" "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+
+# Determine whether it's possible to make 'echo' print without a newline.
+# These variables are no longer used directly by Autoconf, but are AC_SUBSTed
+# for compatibility with existing Makefiles.
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+# For backward compatibility with old third-party macros, we provide
+# the shell variables $as_echo and $as_echo_n.  New code should use
+# AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively.
+as_echo='printf %s\n'
+as_echo_n='printf %s'
+
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='quorum'
+PACKAGE_TARNAME='quorum'
+PACKAGE_VERSION='1.1.2'
+PACKAGE_STRING='quorum 1.1.2'
+PACKAGE_BUGREPORT='gmarcais@cs.cmu.edu'
+PACKAGE_URL=''
+
+ac_unique_file="src/error_correct_reads.hpp"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stddef.h>
+#ifdef HAVE_STDIO_H
+# include <stdio.h>
+#endif
+#ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+#endif
+#ifdef HAVE_STRING_H
+# include <string.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_header_c_list=
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+HAVE_RELATIVE_JF_PATH_FALSE
+HAVE_RELATIVE_JF_PATH_TRUE
+RELATIVE_JF_PATH
+RELATIVE_PATHS_FALSE
+RELATIVE_PATHS_TRUE
+STATIC_FLAGS
+JF_LIB_PATH
+JELLYFISH
+JELLYFISH_VERSION
+JELLYFISH2_0_LIBS
+JELLYFISH2_0_CFLAGS
+PKG_CONFIG_LIBDIR
+PKG_CONFIG_PATH
+PKG_CONFIG
+YAGGO
+CXXCPP
+am__fastdepCXX_FALSE
+am__fastdepCXX_TRUE
+CXXDEPMODE
+ac_ct_CXX
+CXXFLAGS
+CXX
+LT_SYS_LIBRARY_PATH
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+DLLTOOL
+OBJDUMP
+FILECMD
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
+CSCOPE
+ETAGS
+CTAGS
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+runstatedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL
+am__quote'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_silent_rules
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_aix_soname
+enable_dependency_tracking
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+enable_all_static
+enable_relative_paths
+with_relative_jf_path
+with_int128
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+LT_SYS_LIBRARY_PATH
+CXX
+CXXFLAGS
+CCC
+CXXCPP
+YAGGO
+PKG_CONFIG
+PKG_CONFIG_PATH
+PKG_CONFIG_LIBDIR
+JELLYFISH2_0_CFLAGS
+JELLYFISH2_0_LIBS
+JELLYFISH
+JF_LIB_PATH'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+runstatedir='${localstatedir}/run'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -runstatedir | --runstatedir | --runstatedi | --runstated \
+  | --runstate | --runstat | --runsta | --runst | --runs \
+  | --run | --ru | --r)
+    ac_prev=runstatedir ;;
+  -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
+  | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
+  | --run=* | --ru=* | --r=*)
+    runstatedir=$ac_optarg ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    printf "%s\n" "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      printf "%s\n" "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir runstatedir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures quorum 1.1.2 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --runstatedir=DIR       modifiable per-process data [LOCALSTATEDIR/run]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/quorum]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of quorum 1.1.2:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-silent-rules   less verbose build output (undo: "make V=1")
+  --disable-silent-rules  verbose build output (undo: "make V=0")
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --enable-dependency-tracking
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+  --enable-all-static     create statically linked executable
+  --enable-relative-paths store relative paths in quorum Perl script
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-aix-soname=aix|svr4|both
+                          shared library versioning (aka "SONAME") variant to
+                          provide on AIX, [default=aix].
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot[=DIR]    Search for dependent libraries within DIR (or the
+                          compiler's sysroot if not specified).
+  --with-relative-jf-path relative path from quorum to jellyfish (use an
+                          absolute path if not given. default to "." if given
+                          with no argument)
+  --with-int128           enable int128
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  LT_SYS_LIBRARY_PATH
+              User-defined run-time library search path.
+  CXX         C++ compiler command
+  CXXFLAGS    C++ compiler flags
+  CXXCPP      C++ preprocessor
+  YAGGO       Yaggo switch parser generator
+  PKG_CONFIG  path to pkg-config utility
+  PKG_CONFIG_PATH
+              directories to add to pkg-config's search path
+  PKG_CONFIG_LIBDIR
+              path overriding pkg-config's built-in search path
+  JELLYFISH2_0_CFLAGS
+              C compiler flags for JELLYFISH2_0, overriding pkg-config
+  JELLYFISH2_0_LIBS
+              linker flags for JELLYFISH2_0, overriding pkg-config
+  JELLYFISH   Jellyfish executable absolute path (default to looking in PATH)
+  JF_LIB_PATH Append this path to LD_LIBRARY_PATH in quorum
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <gmarcais@cs.cmu.edu>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for configure.gnu first; this name is used for a wrapper for
+    # Metaconfig's "Configure" on case-insensitive file systems.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      printf "%s\n" "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+quorum configure 1.1.2
+generated by GNU Autoconf 2.71
+
+Copyright (C) 2021 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest.beam
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext
+then :
+  ac_retval=0
+else $as_nop
+  printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest.beam conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 test -x conftest$ac_exeext
+       }
+then :
+  ac_retval=0
+else $as_nop
+  printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+printf %s "checking for $2... " >&6; }
+if eval test \${$3+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"
+then :
+  eval "$3=yes"
+else $as_nop
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+printf "%s\n" "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+printf %s "checking for $2... " >&6; }
+if eval test \${$3+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+   which can conflict with char $2 (); below.  */
+
+#include <limits.h>
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main (void)
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"
+then :
+  eval "$3=yes"
+else $as_nop
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+printf "%s\n" "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_cxx_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest.beam
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext
+then :
+  ac_retval=0
+else $as_nop
+  printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_compile
+
+# ac_fn_cxx_try_cpp LINENO
+# ------------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       }
+then :
+  ac_retval=0
+else $as_nop
+  printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_cpp
+
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest.beam conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 test -x conftest$ac_exeext
+       }
+then :
+  ac_retval=0
+else $as_nop
+  printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_link
+
+# ac_fn_cxx_check_header_compile LINENO HEADER VAR INCLUDES
+# ---------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_cxx_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+printf %s "checking for $2... " >&6; }
+if eval test \${$3+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"
+then :
+  eval "$3=yes"
+else $as_nop
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+printf "%s\n" "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_cxx_check_header_compile
+
+# ac_fn_cxx_check_type LINENO TYPE VAR INCLUDES
+# ---------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_cxx_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+printf %s "checking for $2... " >&6; }
+if eval test \${$3+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main (void)
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"
+then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main (void)
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"
+then :
+
+else $as_nop
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+printf "%s\n" "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_cxx_check_type
+
+# ac_fn_check_decl LINENO SYMBOL VAR INCLUDES EXTRA-OPTIONS FLAG-VAR
+# ------------------------------------------------------------------
+# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
+# accordingly. Pass EXTRA-OPTIONS to the compiler, using FLAG-VAR.
+ac_fn_check_decl ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  as_decl_name=`echo $2|sed 's/ *(.*//'`
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
+printf %s "checking whether $as_decl_name is declared... " >&6; }
+if eval test \${$3+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
+  eval ac_save_FLAGS=\$$6
+  as_fn_append $6 " $5"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main (void)
+{
+#ifndef $as_decl_name
+#ifdef __cplusplus
+  (void) $as_decl_use;
+#else
+  (void) $as_decl_name;
+#endif
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"
+then :
+  eval "$3=yes"
+else $as_nop
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+  eval $6=\$ac_save_FLAGS
+
+fi
+eval ac_res=\$$3
+	       { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+printf "%s\n" "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_check_decl
+ac_configure_args_raw=
+for ac_arg
+do
+  case $ac_arg in
+  *\'*)
+    ac_arg=`printf "%s\n" "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+  esac
+  as_fn_append ac_configure_args_raw " '$ac_arg'"
+done
+
+case $ac_configure_args_raw in
+  *$as_nl*)
+    ac_safe_unquote= ;;
+  *)
+    ac_unsafe_z='|&;<>()$`\\"*?[ ''	' # This string ends in space, tab.
+    ac_unsafe_a="$ac_unsafe_z#~"
+    ac_safe_unquote="s/ '\\([^$ac_unsafe_a][^$ac_unsafe_z]*\\)'/ \\1/g"
+    ac_configure_args_raw=`      printf "%s\n" "$ac_configure_args_raw" | sed "$ac_safe_unquote"`;;
+esac
+
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by quorum $as_me 1.1.2, which was
+generated by GNU Autoconf 2.71.  Invocation command line was
+
+  $ $0$ac_configure_args_raw
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    printf "%s\n" "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`printf "%s\n" "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Sanitize IFS.
+  IFS=" ""	$as_nl"
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    printf "%s\n" "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+printf "%s\n" "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    printf "%s\n" "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`printf "%s\n" "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      printf "%s\n" "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      printf "%s\n" "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`printf "%s\n" "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	printf "%s\n" "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      printf "%s\n" "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      printf "%s\n" "$as_me: caught signal $ac_signal"
+    printf "%s\n" "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+printf "%s\n" "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+printf "%s\n" "#define PACKAGE_NAME \"$PACKAGE_NAME\"" >>confdefs.h
+
+printf "%s\n" "#define PACKAGE_TARNAME \"$PACKAGE_TARNAME\"" >>confdefs.h
+
+printf "%s\n" "#define PACKAGE_VERSION \"$PACKAGE_VERSION\"" >>confdefs.h
+
+printf "%s\n" "#define PACKAGE_STRING \"$PACKAGE_STRING\"" >>confdefs.h
+
+printf "%s\n" "#define PACKAGE_BUGREPORT \"$PACKAGE_BUGREPORT\"" >>confdefs.h
+
+printf "%s\n" "#define PACKAGE_URL \"$PACKAGE_URL\"" >>confdefs.h
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+if test -n "$CONFIG_SITE"; then
+  ac_site_files="$CONFIG_SITE"
+elif test "x$prefix" != xNONE; then
+  ac_site_files="$prefix/share/config.site $prefix/etc/config.site"
+else
+  ac_site_files="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+fi
+
+for ac_site_file in $ac_site_files
+do
+  case $ac_site_file in #(
+  */*) :
+     ;; #(
+  *) :
+    ac_site_file=./$ac_site_file ;;
+esac
+  if test -f "$ac_site_file" && test -r "$ac_site_file"; then
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+printf "%s\n" "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+printf "%s\n" "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+printf "%s\n" "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Test code for whether the C compiler supports C89 (global declarations)
+ac_c_conftest_c89_globals='
+/* Does the compiler advertise C89 conformance?
+   Do not test the value of __STDC__, because some compilers set it to 0
+   while being otherwise adequately conformant. */
+#if !defined __STDC__
+# error "Compiler does not advertise C89 conformance"
+#endif
+
+#include <stddef.h>
+#include <stdarg.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7 src/conf.sh.  */
+struct buf { int x; };
+struct buf * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not \xHH hex character constants.
+   These do not provoke an error unfortunately, instead are silently treated
+   as an "x".  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously \x00 != x always comes out true, for an
+   array size at least.  It is necessary to write \x00 == 0 to get something
+   that is true only with -std.  */
+int osf4_cc_array ['\''\x00'\'' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) '\''x'\''
+int xlc6_cc_array[FOO(a) == '\''x'\'' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, int *(*)(struct buf *, struct stat *, int),
+               int, int);'
+
+# Test code for whether the C compiler supports C89 (body of main).
+ac_c_conftest_c89_main='
+ok |= (argc == 0 || f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]);
+'
+
+# Test code for whether the C compiler supports C99 (global declarations)
+ac_c_conftest_c99_globals='
+// Does the compiler advertise C99 conformance?
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 199901L
+# error "Compiler does not advertise C99 conformance"
+#endif
+
+#include <stdbool.h>
+extern int puts (const char *);
+extern int printf (const char *, ...);
+extern int dprintf (int, const char *, ...);
+extern void *malloc (size_t);
+
+// Check varargs macros.  These examples are taken from C99 6.10.3.5.
+// dprintf is used instead of fprintf to avoid needing to declare
+// FILE and stderr.
+#define debug(...) dprintf (2, __VA_ARGS__)
+#define showlist(...) puts (#__VA_ARGS__)
+#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__))
+static void
+test_varargs_macros (void)
+{
+  int x = 1234;
+  int y = 5678;
+  debug ("Flag");
+  debug ("X = %d\n", x);
+  showlist (The first, second, and third items.);
+  report (x>y, "x is %d but y is %d", x, y);
+}
+
+// Check long long types.
+#define BIG64 18446744073709551615ull
+#define BIG32 4294967295ul
+#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0)
+#if !BIG_OK
+  #error "your preprocessor is broken"
+#endif
+#if BIG_OK
+#else
+  #error "your preprocessor is broken"
+#endif
+static long long int bignum = -9223372036854775807LL;
+static unsigned long long int ubignum = BIG64;
+
+struct incomplete_array
+{
+  int datasize;
+  double data[];
+};
+
+struct named_init {
+  int number;
+  const wchar_t *name;
+  double average;
+};
+
+typedef const char *ccp;
+
+static inline int
+test_restrict (ccp restrict text)
+{
+  // See if C++-style comments work.
+  // Iterate through items via the restricted pointer.
+  // Also check for declarations in for loops.
+  for (unsigned int i = 0; *(text+i) != '\''\0'\''; ++i)
+    continue;
+  return 0;
+}
+
+// Check varargs and va_copy.
+static bool
+test_varargs (const char *format, ...)
+{
+  va_list args;
+  va_start (args, format);
+  va_list args_copy;
+  va_copy (args_copy, args);
+
+  const char *str = "";
+  int number = 0;
+  float fnumber = 0;
+
+  while (*format)
+    {
+      switch (*format++)
+	{
+	case '\''s'\'': // string
+	  str = va_arg (args_copy, const char *);
+	  break;
+	case '\''d'\'': // int
+	  number = va_arg (args_copy, int);
+	  break;
+	case '\''f'\'': // float
+	  fnumber = va_arg (args_copy, double);
+	  break;
+	default:
+	  break;
+	}
+    }
+  va_end (args_copy);
+  va_end (args);
+
+  return *str && number && fnumber;
+}
+'
+
+# Test code for whether the C compiler supports C99 (body of main).
+ac_c_conftest_c99_main='
+  // Check bool.
+  _Bool success = false;
+  success |= (argc != 0);
+
+  // Check restrict.
+  if (test_restrict ("String literal") == 0)
+    success = true;
+  char *restrict newvar = "Another string";
+
+  // Check varargs.
+  success &= test_varargs ("s, d'\'' f .", "string", 65, 34.234);
+  test_varargs_macros ();
+
+  // Check flexible array members.
+  struct incomplete_array *ia =
+    malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10));
+  ia->datasize = 10;
+  for (int i = 0; i < ia->datasize; ++i)
+    ia->data[i] = i * 1.234;
+
+  // Check named initializers.
+  struct named_init ni = {
+    .number = 34,
+    .name = L"Test wide string",
+    .average = 543.34343,
+  };
+
+  ni.number = 58;
+
+  int dynamic_array[ni.number];
+  dynamic_array[0] = argv[0][0];
+  dynamic_array[ni.number - 1] = 543;
+
+  // work around unused variable warnings
+  ok |= (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == '\''x'\''
+	 || dynamic_array[ni.number - 1] != 543);
+'
+
+# Test code for whether the C compiler supports C11 (global declarations)
+ac_c_conftest_c11_globals='
+// Does the compiler advertise C11 conformance?
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "Compiler does not advertise C11 conformance"
+#endif
+
+// Check _Alignas.
+char _Alignas (double) aligned_as_double;
+char _Alignas (0) no_special_alignment;
+extern char aligned_as_int;
+char _Alignas (0) _Alignas (int) aligned_as_int;
+
+// Check _Alignof.
+enum
+{
+  int_alignment = _Alignof (int),
+  int_array_alignment = _Alignof (int[100]),
+  char_alignment = _Alignof (char)
+};
+_Static_assert (0 < -_Alignof (int), "_Alignof is signed");
+
+// Check _Noreturn.
+int _Noreturn does_not_return (void) { for (;;) continue; }
+
+// Check _Static_assert.
+struct test_static_assert
+{
+  int x;
+  _Static_assert (sizeof (int) <= sizeof (long int),
+                  "_Static_assert does not work in struct");
+  long int y;
+};
+
+// Check UTF-8 literals.
+#define u8 syntax error!
+char const utf8_literal[] = u8"happens to be ASCII" "another string";
+
+// Check duplicate typedefs.
+typedef long *long_ptr;
+typedef long int *long_ptr;
+typedef long_ptr long_ptr;
+
+// Anonymous structures and unions -- taken from C11 6.7.2.1 Example 1.
+struct anonymous
+{
+  union {
+    struct { int i; int j; };
+    struct { int k; long int l; } w;
+  };
+  int m;
+} v1;
+'
+
+# Test code for whether the C compiler supports C11 (body of main).
+ac_c_conftest_c11_main='
+  _Static_assert ((offsetof (struct anonymous, i)
+		   == offsetof (struct anonymous, w.k)),
+		  "Anonymous union alignment botch");
+  v1.i = 2;
+  v1.w.k = 5;
+  ok |= v1.i != 5;
+'
+
+# Test code for whether the C compiler supports C11 (complete).
+ac_c_conftest_c11_program="${ac_c_conftest_c89_globals}
+${ac_c_conftest_c99_globals}
+${ac_c_conftest_c11_globals}
+
+int
+main (int argc, char **argv)
+{
+  int ok = 0;
+  ${ac_c_conftest_c89_main}
+  ${ac_c_conftest_c99_main}
+  ${ac_c_conftest_c11_main}
+  return ok;
+}
+"
+
+# Test code for whether the C compiler supports C99 (complete).
+ac_c_conftest_c99_program="${ac_c_conftest_c89_globals}
+${ac_c_conftest_c99_globals}
+
+int
+main (int argc, char **argv)
+{
+  int ok = 0;
+  ${ac_c_conftest_c89_main}
+  ${ac_c_conftest_c99_main}
+  return ok;
+}
+"
+
+# Test code for whether the C compiler supports C89 (complete).
+ac_c_conftest_c89_program="${ac_c_conftest_c89_globals}
+
+int
+main (int argc, char **argv)
+{
+  int ok = 0;
+  ${ac_c_conftest_c89_main}
+  return ok;
+}
+"
+
+as_fn_append ac_header_c_list " stdio.h stdio_h HAVE_STDIO_H"
+as_fn_append ac_header_c_list " stdlib.h stdlib_h HAVE_STDLIB_H"
+as_fn_append ac_header_c_list " string.h string_h HAVE_STRING_H"
+as_fn_append ac_header_c_list " inttypes.h inttypes_h HAVE_INTTYPES_H"
+as_fn_append ac_header_c_list " stdint.h stdint_h HAVE_STDINT_H"
+as_fn_append ac_header_c_list " strings.h strings_h HAVE_STRINGS_H"
+as_fn_append ac_header_c_list " sys/stat.h sys_stat_h HAVE_SYS_STAT_H"
+as_fn_append ac_header_c_list " sys/types.h sys_types_h HAVE_SYS_TYPES_H"
+as_fn_append ac_header_c_list " unistd.h unistd_h HAVE_UNISTD_H"
+# Test code for whether the C++ compiler supports C++98 (global declarations)
+ac_cxx_conftest_cxx98_globals='
+// Does the compiler advertise C++98 conformance?
+#if !defined __cplusplus || __cplusplus < 199711L
+# error "Compiler does not advertise C++98 conformance"
+#endif
+
+// These inclusions are to reject old compilers that
+// lack the unsuffixed header files.
+#include <cstdlib>
+#include <exception>
+
+// <cassert> and <cstring> are *not* freestanding headers in C++98.
+extern void assert (int);
+namespace std {
+  extern int strcmp (const char *, const char *);
+}
+
+// Namespaces, exceptions, and templates were all added after "C++ 2.0".
+using std::exception;
+using std::strcmp;
+
+namespace {
+
+void test_exception_syntax()
+{
+  try {
+    throw "test";
+  } catch (const char *s) {
+    // Extra parentheses suppress a warning when building autoconf itself,
+    // due to lint rules shared with more typical C programs.
+    assert (!(strcmp) (s, "test"));
+  }
+}
+
+template <typename T> struct test_template
+{
+  T const val;
+  explicit test_template(T t) : val(t) {}
+  template <typename U> T add(U u) { return static_cast<T>(u) + val; }
+};
+
+} // anonymous namespace
+'
+
+# Test code for whether the C++ compiler supports C++98 (body of main)
+ac_cxx_conftest_cxx98_main='
+  assert (argc);
+  assert (! argv[0]);
+{
+  test_exception_syntax ();
+  test_template<double> tt (2.0);
+  assert (tt.add (4) == 6.0);
+  assert (true && !false);
+}
+'
+
+# Test code for whether the C++ compiler supports C++11 (global declarations)
+ac_cxx_conftest_cxx11_globals='
+// Does the compiler advertise C++ 2011 conformance?
+#if !defined __cplusplus || __cplusplus < 201103L
+# error "Compiler does not advertise C++11 conformance"
+#endif
+
+namespace cxx11test
+{
+  constexpr int get_val() { return 20; }
+
+  struct testinit
+  {
+    int i;
+    double d;
+  };
+
+  class delegate
+  {
+  public:
+    delegate(int n) : n(n) {}
+    delegate(): delegate(2354) {}
+
+    virtual int getval() { return this->n; };
+  protected:
+    int n;
+  };
+
+  class overridden : public delegate
+  {
+  public:
+    overridden(int n): delegate(n) {}
+    virtual int getval() override final { return this->n * 2; }
+  };
+
+  class nocopy
+  {
+  public:
+    nocopy(int i): i(i) {}
+    nocopy() = default;
+    nocopy(const nocopy&) = delete;
+    nocopy & operator=(const nocopy&) = delete;
+  private:
+    int i;
+  };
+
+  // for testing lambda expressions
+  template <typename Ret, typename Fn> Ret eval(Fn f, Ret v)
+  {
+    return f(v);
+  }
+
+  // for testing variadic templates and trailing return types
+  template <typename V> auto sum(V first) -> V
+  {
+    return first;
+  }
+  template <typename V, typename... Args> auto sum(V first, Args... rest) -> V
+  {
+    return first + sum(rest...);
+  }
+}
+'
+
+# Test code for whether the C++ compiler supports C++11 (body of main)
+ac_cxx_conftest_cxx11_main='
+{
+  // Test auto and decltype
+  auto a1 = 6538;
+  auto a2 = 48573953.4;
+  auto a3 = "String literal";
+
+  int total = 0;
+  for (auto i = a3; *i; ++i) { total += *i; }
+
+  decltype(a2) a4 = 34895.034;
+}
+{
+  // Test constexpr
+  short sa[cxx11test::get_val()] = { 0 };
+}
+{
+  // Test initializer lists
+  cxx11test::testinit il = { 4323, 435234.23544 };
+}
+{
+  // Test range-based for
+  int array[] = {9, 7, 13, 15, 4, 18, 12, 10, 5, 3,
+                 14, 19, 17, 8, 6, 20, 16, 2, 11, 1};
+  for (auto &x : array) { x += 23; }
+}
+{
+  // Test lambda expressions
+  using cxx11test::eval;
+  assert (eval ([](int x) { return x*2; }, 21) == 42);
+  double d = 2.0;
+  assert (eval ([&](double x) { return d += x; }, 3.0) == 5.0);
+  assert (d == 5.0);
+  assert (eval ([=](double x) mutable { return d += x; }, 4.0) == 9.0);
+  assert (d == 5.0);
+}
+{
+  // Test use of variadic templates
+  using cxx11test::sum;
+  auto a = sum(1);
+  auto b = sum(1, 2);
+  auto c = sum(1.0, 2.0, 3.0);
+}
+{
+  // Test constructor delegation
+  cxx11test::delegate d1;
+  cxx11test::delegate d2();
+  cxx11test::delegate d3(45);
+}
+{
+  // Test override and final
+  cxx11test::overridden o1(55464);
+}
+{
+  // Test nullptr
+  char *c = nullptr;
+}
+{
+  // Test template brackets
+  test_template<::test_template<int>> v(test_template<int>(12));
+}
+{
+  // Unicode literals
+  char const *utf8 = u8"UTF-8 string \u2500";
+  char16_t const *utf16 = u"UTF-8 string \u2500";
+  char32_t const *utf32 = U"UTF-32 string \u2500";
+}
+'
+
+# Test code for whether the C compiler supports C++11 (complete).
+ac_cxx_conftest_cxx11_program="${ac_cxx_conftest_cxx98_globals}
+${ac_cxx_conftest_cxx11_globals}
+
+int
+main (int argc, char **argv)
+{
+  int ok = 0;
+  ${ac_cxx_conftest_cxx98_main}
+  ${ac_cxx_conftest_cxx11_main}
+  return ok;
+}
+"
+
+# Test code for whether the C compiler supports C++98 (complete).
+ac_cxx_conftest_cxx98_program="${ac_cxx_conftest_cxx98_globals}
+int
+main (int argc, char **argv)
+{
+  int ok = 0;
+  ${ac_cxx_conftest_cxx98_main}
+  return ok;
+}
+"
+
+
+# Auxiliary files required by this configure script.
+ac_aux_files="compile config.guess config.sub ltmain.sh missing install-sh"
+
+# Locations in which to look for auxiliary files.
+ac_aux_dir_candidates="${srcdir}/build-aux"
+
+# Search for a directory containing all of the required auxiliary files,
+# $ac_aux_files, from the $PATH-style list $ac_aux_dir_candidates.
+# If we don't find one directory that contains all the files we need,
+# we report the set of missing files from the *first* directory in
+# $ac_aux_dir_candidates and give up.
+ac_missing_aux_files=""
+ac_first_candidate=:
+printf "%s\n" "$as_me:${as_lineno-$LINENO}: looking for aux files: $ac_aux_files" >&5
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in $ac_aux_dir_candidates
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+  as_found=:
+
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}:  trying $as_dir" >&5
+  ac_aux_dir_found=yes
+  ac_install_sh=
+  for ac_aux in $ac_aux_files
+  do
+    # As a special case, if "install-sh" is required, that requirement
+    # can be satisfied by any of "install-sh", "install.sh", or "shtool",
+    # and $ac_install_sh is set appropriately for whichever one is found.
+    if test x"$ac_aux" = x"install-sh"
+    then
+      if test -f "${as_dir}install-sh"; then
+        printf "%s\n" "$as_me:${as_lineno-$LINENO}:   ${as_dir}install-sh found" >&5
+        ac_install_sh="${as_dir}install-sh -c"
+      elif test -f "${as_dir}install.sh"; then
+        printf "%s\n" "$as_me:${as_lineno-$LINENO}:   ${as_dir}install.sh found" >&5
+        ac_install_sh="${as_dir}install.sh -c"
+      elif test -f "${as_dir}shtool"; then
+        printf "%s\n" "$as_me:${as_lineno-$LINENO}:   ${as_dir}shtool found" >&5
+        ac_install_sh="${as_dir}shtool install -c"
+      else
+        ac_aux_dir_found=no
+        if $ac_first_candidate; then
+          ac_missing_aux_files="${ac_missing_aux_files} install-sh"
+        else
+          break
+        fi
+      fi
+    else
+      if test -f "${as_dir}${ac_aux}"; then
+        printf "%s\n" "$as_me:${as_lineno-$LINENO}:   ${as_dir}${ac_aux} found" >&5
+      else
+        ac_aux_dir_found=no
+        if $ac_first_candidate; then
+          ac_missing_aux_files="${ac_missing_aux_files} ${ac_aux}"
+        else
+          break
+        fi
+      fi
+    fi
+  done
+  if test "$ac_aux_dir_found" = yes; then
+    ac_aux_dir="$as_dir"
+    break
+  fi
+  ac_first_candidate=false
+
+  as_found=false
+done
+IFS=$as_save_IFS
+if $as_found
+then :
+
+else $as_nop
+  as_fn_error $? "cannot find required auxiliary files:$ac_missing_aux_files" "$LINENO" 5
+fi
+
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+if test -f "${ac_aux_dir}config.guess"; then
+  ac_config_guess="$SHELL ${ac_aux_dir}config.guess"
+fi
+if test -f "${ac_aux_dir}config.sub"; then
+  ac_config_sub="$SHELL ${ac_aux_dir}config.sub"
+fi
+if test -f "$ac_aux_dir/configure"; then
+  ac_configure="$SHELL ${ac_aux_dir}configure"
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+printf "%s\n" "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+printf "%s\n" "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+printf "%s\n" "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+printf "%s\n" "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+printf "%s\n" "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+printf "%s\n" "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`printf "%s\n" "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+printf "%s\n" "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`${MAKE-make} distclean' and/or \`rm $cache_file'
+	    and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+
+am__api_version='1.16'
+
+
+
+  # Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+printf %s "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if test ${ac_cv_path_install+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    # Account for fact that we put trailing slashes in our PATH walk.
+case $as_dir in #((
+  ./ | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if as_fn_executable_p "$as_dir$ac_prog$ac_exec_ext"; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir/" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test ${ac_cv_path_install+y}; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+printf "%s\n" "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+printf %s "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$*" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$*" != "X $srcdir/configure conftest.file" \
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment" "$LINENO" 5
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+printf "%s\n" "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`printf "%s\n" "$program_transform_name" | sed "$ac_script"`
+
+
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+
+
+  if test x"${MISSING+set}" != xset; then
+  MISSING="\${SHELL} '$am_aux_dir/missing'"
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+printf "%s\n" "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_STRIP+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+printf "%s\n" "$STRIP" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_STRIP+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+printf "%s\n" "$ac_ct_STRIP" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for a race-free mkdir -p" >&5
+printf %s "checking for a race-free mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if test ${ac_cv_path_mkdir+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   as_fn_executable_p "$as_dir$ac_prog$ac_exec_ext" || continue
+	   case `"$as_dir$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir ('*'coreutils) '* | \
+	     'BusyBox '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test ${ac_cv_path_mkdir+y}; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+printf "%s\n" "$MKDIR_P" >&6; }
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_AWK+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+printf "%s\n" "$AWK" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+printf %s "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`printf "%s\n" "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval test \${ac_cv_prog_make_${ac_make}_set+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+printf "%s\n" "yes" >&6; }
+  SET_MAKE=
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+# Check whether --enable-silent-rules was given.
+if test ${enable_silent_rules+y}
+then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+printf %s "checking whether $am_make supports nested variables... " >&6; }
+if test ${am_cv_make_support_nested_variables+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if printf "%s\n" 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+printf "%s\n" "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='quorum'
+ VERSION='1.1.2'
+
+
+printf "%s\n" "#define PACKAGE \"$PACKAGE\"" >>confdefs.h
+
+
+printf "%s\n" "#define VERSION \"$VERSION\"" >>confdefs.h
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
+# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar  pax cpio none'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
+# Variables for tags utilities; see am/tags.am
+if test -z "$CTAGS"; then
+  CTAGS=ctags
+fi
+
+if test -z "$ETAGS"; then
+  ETAGS=etags
+fi
+
+if test -z "$CSCOPE"; then
+  CSCOPE=cscope
+fi
+
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <https://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+  fi
+fi
+
+# Check whether --enable-silent-rules was given.
+if test ${enable_silent_rules+y}
+then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=0;;
+esac
+am_make=${MAKE-make}
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+printf %s "checking whether $am_make supports nested variables... " >&6; }
+if test ${am_cv_make_support_nested_variables+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if printf "%s\n" 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+printf "%s\n" "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+
+# Compile using libtool to get the path to jellyfish added to exec
+case `pwd` in
+  *\ * | *\	*)
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+printf "%s\n" "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.7'
+macro_revision='2.4.7'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain=$ac_aux_dir/ltmain.sh
+
+
+
+  # Make sure we can run config.sub.
+$SHELL "${ac_aux_dir}config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL ${ac_aux_dir}config.sub" "$LINENO" 5
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+printf %s "checking build system type... " >&6; }
+if test ${ac_cv_build+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "${ac_aux_dir}config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "${ac_aux_dir}config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+printf "%s\n" "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+printf %s "checking host system type... " >&6; }
+if test ${ac_cv_host+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "${ac_aux_dir}config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+printf "%s\n" "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+printf %s "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case $ECHO in
+  printf*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+printf "%s\n" "printf" >&6; } ;;
+  print*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+printf "%s\n" "print -r" >&6; } ;;
+  *) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+printf "%s\n" "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5
+printf %s "checking whether ${MAKE-make} supports the include directive... " >&6; }
+cat > confinc.mk << 'END'
+am__doit:
+	@echo this is the am__doit target >confinc.out
+.PHONY: am__doit
+END
+am__include="#"
+am__quote=
+# BSD make does it like this.
+echo '.include "confinc.mk" # ignored' > confmf.BSD
+# Other make implementations (GNU, Solaris 10, AIX) do it like this.
+echo 'include confinc.mk # ignored' > confmf.GNU
+_am_result=no
+for s in GNU BSD; do
+  { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5
+   (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }
+  case $?:`cat confinc.out 2>/dev/null` in #(
+  '0:this is the am__doit target') :
+    case $s in #(
+  BSD) :
+    am__include='.include' am__quote='"' ;; #(
+  *) :
+    am__include='include' am__quote='' ;;
+esac ;; #(
+  *) :
+     ;;
+esac
+  if test "$am__include" != "#"; then
+    _am_result="yes ($s style)"
+    break
+  fi
+done
+rm -f confinc.* confmf.*
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5
+printf "%s\n" "${_am_result}" >&6; }
+
+# Check whether --enable-dependency-tracking was given.
+if test ${enable_dependency_tracking+y}
+then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_CC+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+printf "%s\n" "$CC" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_CC+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+printf "%s\n" "$ac_ct_CC" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_CC+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+printf "%s\n" "$CC" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_CC+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    if test "$as_dir$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+printf "%s\n" "$CC" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_CC+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+printf "%s\n" "$CC" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_CC+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+printf "%s\n" "$ac_ct_CC" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}clang", so it can be a program name with args.
+set dummy ${ac_tool_prefix}clang; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_CC+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}clang"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+printf "%s\n" "$CC" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "clang", so it can be a program name with args.
+set dummy clang; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_CC+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="clang"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+printf "%s\n" "$ac_ct_CC" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+fi
+
+
+test -z "$CC" && { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion -version; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+printf %s "checking whether the C compiler works... " >&6; }
+ac_link_default=`printf "%s\n" "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test ${ac_cv_exeext+y} && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else $as_nop
+  ac_file=''
+fi
+if test -z "$ac_file"
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else $as_nop
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+printf "%s\n" "yes" >&6; }
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+printf %s "checking for C compiler default output file name... " >&6; }
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+printf "%s\n" "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+printf %s "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else $as_nop
+  { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+printf "%s\n" "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main (void)
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+printf %s "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+printf "%s\n" "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+printf %s "checking for suffix of object files... " >&6; }
+if test ${ac_cv_objext+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else $as_nop
+  printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+printf "%s\n" "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether the compiler supports GNU C" >&5
+printf %s "checking whether the compiler supports GNU C... " >&6; }
+if test ${ac_cv_c_compiler_gnu+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"
+then :
+  ac_compiler_gnu=yes
+else $as_nop
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+printf "%s\n" "$ac_cv_c_compiler_gnu" >&6; }
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+y}
+ac_save_CFLAGS=$CFLAGS
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+printf %s "checking whether $CC accepts -g... " >&6; }
+if test ${ac_cv_prog_cc_g+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"
+then :
+  ac_cv_prog_cc_g=yes
+else $as_nop
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"
+then :
+
+else $as_nop
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"
+then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+printf "%s\n" "$ac_cv_prog_cc_g" >&6; }
+if test $ac_test_CFLAGS; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+ac_prog_cc_stdc=no
+if test x$ac_prog_cc_stdc = xno
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C11 features" >&5
+printf %s "checking for $CC option to enable C11 features... " >&6; }
+if test ${ac_cv_prog_cc_c11+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_cv_prog_cc_c11=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_c_conftest_c11_program
+_ACEOF
+for ac_arg in '' -std=gnu11
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"
+then :
+  ac_cv_prog_cc_c11=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam
+  test "x$ac_cv_prog_cc_c11" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+fi
+
+if test "x$ac_cv_prog_cc_c11" = xno
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+printf "%s\n" "unsupported" >&6; }
+else $as_nop
+  if test "x$ac_cv_prog_cc_c11" = x
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+printf "%s\n" "none needed" >&6; }
+else $as_nop
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c11" >&5
+printf "%s\n" "$ac_cv_prog_cc_c11" >&6; }
+     CC="$CC $ac_cv_prog_cc_c11"
+fi
+  ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c11
+  ac_prog_cc_stdc=c11
+fi
+fi
+if test x$ac_prog_cc_stdc = xno
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C99 features" >&5
+printf %s "checking for $CC option to enable C99 features... " >&6; }
+if test ${ac_cv_prog_cc_c99+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_cv_prog_cc_c99=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_c_conftest_c99_program
+_ACEOF
+for ac_arg in '' -std=gnu99 -std=c99 -c99 -qlanglvl=extc1x -qlanglvl=extc99 -AC99 -D_STDC_C99=
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"
+then :
+  ac_cv_prog_cc_c99=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam
+  test "x$ac_cv_prog_cc_c99" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+fi
+
+if test "x$ac_cv_prog_cc_c99" = xno
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+printf "%s\n" "unsupported" >&6; }
+else $as_nop
+  if test "x$ac_cv_prog_cc_c99" = x
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+printf "%s\n" "none needed" >&6; }
+else $as_nop
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5
+printf "%s\n" "$ac_cv_prog_cc_c99" >&6; }
+     CC="$CC $ac_cv_prog_cc_c99"
+fi
+  ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99
+  ac_prog_cc_stdc=c99
+fi
+fi
+if test x$ac_prog_cc_stdc = xno
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C89 features" >&5
+printf %s "checking for $CC option to enable C89 features... " >&6; }
+if test ${ac_cv_prog_cc_c89+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_c_conftest_c89_program
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"
+then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+fi
+
+if test "x$ac_cv_prog_cc_c89" = xno
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+printf "%s\n" "unsupported" >&6; }
+else $as_nop
+  if test "x$ac_cv_prog_cc_c89" = x
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+printf "%s\n" "none needed" >&6; }
+else $as_nop
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+printf "%s\n" "$ac_cv_prog_cc_c89" >&6; }
+     CC="$CC $ac_cv_prog_cc_c89"
+fi
+  ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89
+  ac_prog_cc_stdc=c89
+fi
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+printf %s "checking whether $CC understands -c and -o together... " >&6; }
+if test ${am_cv_prog_cc_c_o+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+printf "%s\n" "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+depcc="$CC"   am_compiler_list=
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+printf %s "checking dependency style of $depcc... " >&6; }
+if test ${am_cv_CC_dependencies_compiler_type+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+printf "%s\n" "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+printf %s "checking for a sed that does not truncate output... " >&6; }
+if test ${ac_cv_path_SED+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_prog in sed gsed
+   do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  printf %s 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    printf "%s\n" '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+printf "%s\n" "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+printf %s "checking for grep that handles long lines and -e... " >&6; }
+if test ${ac_cv_path_GREP+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_prog in grep ggrep
+   do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  printf %s 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    printf "%s\n" 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+printf "%s\n" "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+printf %s "checking for egrep... " >&6; }
+if test ${ac_cv_path_EGREP+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_prog in egrep
+   do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  printf %s 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    printf "%s\n" 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+printf "%s\n" "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+printf %s "checking for fgrep... " >&6; }
+if test ${ac_cv_path_FGREP+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_prog in fgrep
+   do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_FGREP" || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  printf %s 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    printf "%s\n" 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+printf "%s\n" "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test ${with_gnu_ld+y}
+then :
+  withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
+else $as_nop
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test yes = "$GCC"; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+printf %s "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return, which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD=$ac_prog
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test yes = "$with_gnu_ld"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+printf %s "checking for GNU ld... " >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+printf %s "checking for non-GNU ld... " >&6; }
+fi
+if test ${lt_cv_path_LD+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -z "$LD"; then
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD=$ac_dir/$ac_prog
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test no != "$with_gnu_ld" && break
+	;;
+      *)
+	test yes != "$with_gnu_ld" && break
+	;;
+      esac
+    fi
+  done
+  IFS=$lt_save_ifs
+else
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
+fi
+fi
+
+LD=$lt_cv_path_LD
+if test -n "$LD"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+printf "%s\n" "$LD" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+printf %s "checking if the linker ($LD) is GNU ld... " >&6; }
+if test ${lt_cv_prog_gnu_ld+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+printf "%s\n" "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+printf %s "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if test ${lt_cv_path_NM+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM=$NM
+else
+  lt_nm_to_check=${ac_tool_prefix}nm
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS=$lt_save_ifs
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm=$ac_dir/$lt_tmp_nm
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the 'sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	# MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+	case $build_os in
+	mingw*) lt_bad_file=conftest.nm/nofile ;;
+	*) lt_bad_file=/dev/null ;;
+	esac
+	case `"$tmp_nm" -B $lt_bad_file 2>&1 | $SED '1q'` in
+	*$lt_bad_file* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break 2
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | $SED '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break 2
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS=$lt_save_ifs
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+printf "%s\n" "$lt_cv_path_NM" >&6; }
+if test no != "$lt_cv_path_NM"; then
+  NM=$lt_cv_path_NM
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_DUMPBIN+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+printf "%s\n" "$DUMPBIN" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_DUMPBIN+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+printf "%s\n" "$ac_ct_DUMPBIN" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | $SED '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols -headers"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test : != "$DUMPBIN"; then
+    NM=$DUMPBIN
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+printf %s "checking the name lister ($NM) interface... " >&6; }
+if test ${lt_cv_nm_interface+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+printf "%s\n" "$lt_cv_nm_interface" >&6; }
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+printf %s "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+printf "%s\n" "yes" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+printf "%s\n" "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+printf %s "checking the maximum length of command line arguments... " >&6; }
+if test ${lt_cv_sys_max_cmd_len+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+    i=0
+  teststring=ABCD
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  bitrig* | darwin* | dragonfly* | freebsd* | midnightbsd* | netbsd* | openbsd*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | $SED 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+       test undefined != "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test X`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test 17 != "$i" # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n "$lt_cv_sys_max_cmd_len"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+printf "%s\n" "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none" >&5
+printf "%s\n" "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+printf %s "checking how to convert $build file names to $host format... " >&6; }
+if test ${lt_cv_to_host_file_cmd+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+printf "%s\n" "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+printf %s "checking how to convert $build file names to toolchain format... " >&6; }
+if test ${lt_cv_to_tool_file_cmd+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+printf "%s\n" "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+printf %s "checking for $LD option to reload object files... " >&6; }
+if test ${lt_cv_ld_reload_flag+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_ld_reload_flag='-r'
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+printf "%s\n" "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test yes != "$GCC"; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test yes = "$GCC"; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}file", so it can be a program name with args.
+set dummy ${ac_tool_prefix}file; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_FILECMD+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$FILECMD"; then
+  ac_cv_prog_FILECMD="$FILECMD" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_FILECMD="${ac_tool_prefix}file"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+FILECMD=$ac_cv_prog_FILECMD
+if test -n "$FILECMD"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $FILECMD" >&5
+printf "%s\n" "$FILECMD" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_FILECMD"; then
+  ac_ct_FILECMD=$FILECMD
+  # Extract the first word of "file", so it can be a program name with args.
+set dummy file; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_FILECMD+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_FILECMD"; then
+  ac_cv_prog_ac_ct_FILECMD="$ac_ct_FILECMD" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_FILECMD="file"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_FILECMD=$ac_cv_prog_ac_ct_FILECMD
+if test -n "$ac_ct_FILECMD"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_FILECMD" >&5
+printf "%s\n" "$ac_ct_FILECMD" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_ct_FILECMD" = x; then
+    FILECMD=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    FILECMD=$ac_ct_FILECMD
+  fi
+else
+  FILECMD="$ac_cv_prog_FILECMD"
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_OBJDUMP+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+printf "%s\n" "$OBJDUMP" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_OBJDUMP+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+printf "%s\n" "$ac_ct_OBJDUMP" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+printf %s "checking how to recognize dependent libraries... " >&6; }
+if test ${lt_cv_deplibs_check_method+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# 'unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='$FILECMD -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly* | midnightbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=$FILECMD
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=$FILECMD
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd* | netbsdelf*-gnu)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=$FILECMD
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd* | bitrig*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+os2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+printf "%s\n" "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_DLLTOOL+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+printf "%s\n" "$DLLTOOL" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_DLLTOOL+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+printf "%s\n" "$ac_ct_DLLTOOL" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+printf %s "checking how to associate runtime and link libraries... " >&6; }
+if test ${lt_cv_sharedlib_from_linklib_cmd+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh;
+  # decide which one to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd=$ECHO
+  ;;
+esac
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+printf "%s\n" "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_AR+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+printf "%s\n" "$AR" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_AR+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+printf "%s\n" "$ac_ct_AR" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+
+
+
+
+
+
+# Use ARFLAGS variable as AR's operation code to sync the variable naming with
+# Automake.  If both AR_FLAGS and ARFLAGS are specified, AR_FLAGS should have
+# higher priority because thats what people were doing historically (setting
+# ARFLAGS for automake and AR_FLAGS for libtool).  FIXME: Make the AR_FLAGS
+# variable obsoleted/removed.
+
+test ${AR_FLAGS+y} || AR_FLAGS=${ARFLAGS-cr}
+lt_ar_flags=$AR_FLAGS
+
+
+
+
+
+
+# Make AR_FLAGS overridable by 'make ARFLAGS='.  Don't try to run-time override
+# by AR_FLAGS because that was never working and AR_FLAGS is about to die.
+
+
+
+
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+printf %s "checking for archiver @FILE support... " >&6; }
+if test ${lt_cv_ar_at_file+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"
+then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test 0 -eq "$ac_status"; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test 0 -ne "$ac_status"; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+printf "%s\n" "$lt_cv_ar_at_file" >&6; }
+
+if test no = "$lt_cv_ar_at_file"; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_STRIP+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+printf "%s\n" "$STRIP" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_STRIP+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+printf "%s\n" "$ac_ct_STRIP" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_RANLIB+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+printf "%s\n" "$RANLIB" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_RANLIB+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+printf "%s\n" "$ac_ct_RANLIB" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  bitrig* | openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+printf %s "checking command to parse $NM output from $compiler object... " >&6; }
+if test ${lt_cv_sys_global_symbol_pipe+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test ia64 = "$host_cpu"; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  # Gets list of data symbols to import.
+  lt_cv_sys_global_symbol_to_import="$SED -n -e 's/^I .* \(.*\)$/\1/p'"
+  # Adjust the below global symbol transforms to fixup imported variables.
+  lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+  lt_c_name_hook=" -e 's/^I .* \(.*\)$/  {\"\1\", (void *) 0},/p'"
+  lt_c_name_lib_hook="\
+  -e 's/^I .* \(lib.*\)$/  {\"\1\", (void *) 0},/p'\
+  -e 's/^I .* \(.*\)$/  {\"lib\1\", (void *) 0},/p'"
+else
+  # Disable hooks by default.
+  lt_cv_sys_global_symbol_to_import=
+  lt_cdecl_hook=
+  lt_c_name_hook=
+  lt_c_name_lib_hook=
+fi
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="$SED -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="$SED -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="$SED -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/  {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"lib\1\", (void *) \&\1},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function,
+    # D for any global variable and I for any imported variable.
+    # Also find C++ and __fastcall symbols from MSVC++ or ICC,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+"     /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+"     /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+"     {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+"     s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="$SED -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | $SED '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    $ECHO "$as_me:$LINENO: $NM conftest.$ac_objext | $lt_cv_sys_global_symbol_pipe > $nlist" >&5
+    if eval "$NM" conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist 2>&5 && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS=conftstm.$ac_objext
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest$ac_exeext; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test yes = "$pipe_works"; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+printf "%s\n" "failed" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+printf "%s\n" "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+printf %s "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test ${with_sysroot+y}
+then :
+  withval=$with_sysroot;
+else $as_nop
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case $with_sysroot in #(
+ yes)
+   if test yes = "$GCC"; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | $SED -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5
+printf "%s\n" "$with_sysroot" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+printf "%s\n" "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5
+printf %s "checking for a working dd... " >&6; }
+if test ${ac_cv_path_lt_DD+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+if test -z "$lt_DD"; then
+  ac_path_lt_DD_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_prog in dd
+   do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_lt_DD="$as_dir$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_lt_DD" || continue
+if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi
+      $ac_path_lt_DD_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_lt_DD"; then
+    :
+  fi
+else
+  ac_cv_path_lt_DD=$lt_DD
+fi
+
+rm -f conftest.i conftest2.i conftest.out
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5
+printf "%s\n" "$ac_cv_path_lt_DD" >&6; }
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5
+printf %s "checking how to truncate binary pipes... " >&6; }
+if test ${lt_cv_truncate_bin+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5
+printf "%s\n" "$lt_cv_truncate_bin" >&6; }
+
+
+
+
+
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+        distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+# Check whether --enable-libtool-lock was given.
+if test ${enable_libtool_lock+y}
+then :
+  enableval=$enable_libtool_lock;
+fi
+
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out what ABI is being produced by ac_compile, and set mode
+  # options accordingly.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `$FILECMD conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE=32
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE=64
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test yes = "$lt_cv_prog_gnu_ld"; then
+      case `$FILECMD conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `$FILECMD conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+mips64*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    emul=elf
+    case `$FILECMD conftest.$ac_objext` in
+      *32-bit*)
+	emul="${emul}32"
+	;;
+      *64-bit*)
+	emul="${emul}64"
+	;;
+    esac
+    case `$FILECMD conftest.$ac_objext` in
+      *MSB*)
+	emul="${emul}btsmip"
+	;;
+      *LSB*)
+	emul="${emul}ltsmip"
+	;;
+    esac
+    case `$FILECMD conftest.$ac_objext` in
+      *N32*)
+	emul="${emul}n32"
+	;;
+    esac
+    LD="${LD-ld} -m $emul"
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.  Note that the listed cases only cover the
+  # situations where additional linker options are needed (such as when
+  # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+  # vice versa); the common cases where no linker options are needed do
+  # not appear in the list.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `$FILECMD conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    case `$FILECMD conftest.o` in
+	      *x86-64*)
+		LD="${LD-ld} -m elf32_x86_64"
+		;;
+	      *)
+		LD="${LD-ld} -m elf_i386"
+		;;
+	    esac
+	    ;;
+	  powerpc64le-*linux*)
+	    LD="${LD-ld} -m elf32lppclinux"
+	    ;;
+	  powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  powerpcle-*linux*)
+	    LD="${LD-ld} -m elf64lppc"
+	    ;;
+	  powerpc-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS=$CFLAGS
+  CFLAGS="$CFLAGS -belf"
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+printf %s "checking whether the C compiler needs -belf... " >&6; }
+if test ${lt_cv_cc_needs_belf+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"
+then :
+  lt_cv_cc_needs_belf=yes
+else $as_nop
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+printf "%s\n" "$lt_cv_cc_needs_belf" >&6; }
+  if test yes != "$lt_cv_cc_needs_belf"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS=$SAVE_CFLAGS
+  fi
+  ;;
+*-*solaris*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `$FILECMD conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*|x86_64-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD=${LD-ld}_sol2
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks=$enable_libtool_lock
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_MANIFEST_TOOL+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+printf "%s\n" "$MANIFEST_TOOL" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_MANIFEST_TOOL+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+printf "%s\n" "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+printf %s "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if test ${lt_cv_path_mainfest_tool+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+printf "%s\n" "$lt_cv_path_mainfest_tool" >&6; }
+if test yes != "$lt_cv_path_mainfest_tool"; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_DSYMUTIL+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+printf "%s\n" "$DSYMUTIL" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_DSYMUTIL+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+printf "%s\n" "$ac_ct_DSYMUTIL" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_NMEDIT+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+printf "%s\n" "$NMEDIT" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_NMEDIT+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+printf "%s\n" "$ac_ct_NMEDIT" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_LIPO+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+printf "%s\n" "$LIPO" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_LIPO+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+printf "%s\n" "$ac_ct_LIPO" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_OTOOL+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+printf "%s\n" "$OTOOL" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_OTOOL+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+printf "%s\n" "$ac_ct_OTOOL" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_OTOOL64+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+printf "%s\n" "$OTOOL64" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_OTOOL64+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+printf "%s\n" "$ac_ct_OTOOL64" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+printf %s "checking for -single_module linker flag... " >&6; }
+if test ${lt_cv_apple_cc_single_mod+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_apple_cc_single_mod=no
+      if test -z "$LT_MULTI_MODULE"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+printf "%s\n" "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+printf %s "checking for -exported_symbols_list linker flag... " >&6; }
+if test ${lt_cv_ld_exported_symbols_list+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"
+then :
+  lt_cv_ld_exported_symbols_list=yes
+else $as_nop
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS=$save_LDFLAGS
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+printf "%s\n" "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+printf %s "checking for -force_load linker flag... " >&6; }
+if test ${lt_cv_ld_force_load+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR $AR_FLAGS libconftest.a conftest.o" >&5
+      $AR $AR_FLAGS libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+printf "%s\n" "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+    darwin*)
+      case $MACOSX_DEPLOYMENT_TARGET,$host in
+        10.[012],*|,*powerpc*-darwin[5-8]*)
+          _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+        *)
+          _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test yes = "$lt_cv_apple_cc_single_mod"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test yes = "$lt_cv_ld_exported_symbols_list"; then
+      _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
+    fi
+    if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
+ac_header= ac_cache=
+for ac_item in $ac_header_c_list
+do
+  if test $ac_cache; then
+    ac_fn_c_check_header_compile "$LINENO" $ac_header ac_cv_header_$ac_cache "$ac_includes_default"
+    if eval test \"x\$ac_cv_header_$ac_cache\" = xyes; then
+      printf "%s\n" "#define $ac_item 1" >> confdefs.h
+    fi
+    ac_header= ac_cache=
+  elif test $ac_header; then
+    ac_cache=$ac_item
+  else
+    ac_header=$ac_item
+  fi
+done
+
+
+
+
+
+
+
+
+if test $ac_cv_header_stdlib_h = yes && test $ac_cv_header_string_h = yes
+then :
+
+printf "%s\n" "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes
+then :
+  printf "%s\n" "#define HAVE_DLFCN_H 1" >>confdefs.h
+
+fi
+
+
+
+
+
+# Set options
+
+
+
+        enable_dlopen=no
+
+
+  enable_win32_dll=no
+
+
+            # Check whether --enable-shared was given.
+if test ${enable_shared+y}
+then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for pkg in $enableval; do
+	IFS=$lt_save_ifs
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac
+else $as_nop
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test ${enable_static+y}
+then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for pkg in $enableval; do
+	IFS=$lt_save_ifs
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac
+else $as_nop
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test ${with_pic+y}
+then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for lt_pkg in $withval; do
+	IFS=$lt_save_ifs
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac
+else $as_nop
+  pic_mode=default
+fi
+
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test ${enable_fast_install+y}
+then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for pkg in $enableval; do
+	IFS=$lt_save_ifs
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac
+else $as_nop
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+  shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[5-9]*,yes)
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5
+printf %s "checking which variant of shared library versioning to provide... " >&6; }
+
+# Check whether --with-aix-soname was given.
+if test ${with_aix_soname+y}
+then :
+  withval=$with_aix_soname; case $withval in
+    aix|svr4|both)
+      ;;
+    *)
+      as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5
+      ;;
+    esac
+    lt_cv_with_aix_soname=$with_aix_soname
+else $as_nop
+  if test ${lt_cv_with_aix_soname+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_with_aix_soname=aix
+fi
+
+    with_aix_soname=$lt_cv_with_aix_soname
+fi
+
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5
+printf "%s\n" "$with_aix_soname" >&6; }
+  if test aix != "$with_aix_soname"; then
+    # For the AIX way of multilib, we name the shared archive member
+    # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+    # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+    # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+    # the AIX toolchain works better with OBJECT_MODE set (default 32).
+    if test 64 = "${OBJECT_MODE-32}"; then
+      shared_archive_member_spec=shr_64
+    else
+      shared_archive_member_spec=shr
+    fi
+  fi
+  ;;
+*)
+  with_aix_soname=aix
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS=$ltmain
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}"; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+printf %s "checking for objdir... " >&6; }
+if test ${lt_cv_objdir+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+printf "%s\n" "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+printf "%s\n" "#define LT_OBJDIR \"$lt_cv_objdir/\"" >>confdefs.h
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test set != "${COLLECT_NAMES+set}"; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a '.a' archive for static linking (except MSVC and
+# ICC, which need '.lib').
+libext=a
+
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+old_CC=$CC
+old_CFLAGS=$CFLAGS
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+printf %s "checking for ${ac_tool_prefix}file... " >&6; }
+if test ${lt_cv_path_MAGIC_CMD+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/${ac_tool_prefix}file"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
+  ;;
+esac
+fi
+
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+if test -n "$MAGIC_CMD"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+printf "%s\n" "$MAGIC_CMD" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+printf %s "checking for file... " >&6; }
+if test ${lt_cv_path_MAGIC_CMD+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/file"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
+  ;;
+esac
+fi
+
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+if test -n "$MAGIC_CMD"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+printf "%s\n" "$MAGIC_CMD" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC=$CC
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test yes = "$GCC"; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+printf %s "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if test ${lt_cv_prog_compiler_rtti_exceptions+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"  ## exclude from sc_useless_quotes_in_assignment
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+printf "%s\n" "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test yes = "$GCC"; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test ia64 = "$host_cpu"; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static='$wl-static'
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test ia64 = "$host_cpu"; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      case $cc_basename in
+      nagfor*)
+        # NAG Fortran compiler
+        lt_prog_compiler_wl='-Wl,-Wl,,'
+        lt_prog_compiler_pic='-PIC'
+        lt_prog_compiler_static='-Bstatic'
+        ;;
+      esac
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static='$wl-static'
+	;;
+      esac
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='$wl-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+      case $cc_basename in
+      # old Intel for x86_64, which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # flang / f18. f95 an alias for gfortran or flang on Debian
+      flang* | f18* | f95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | $SED 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms that do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+printf %s "checking for $compiler option to produce PIC... " >&6; }
+if test ${lt_cv_prog_compiler_pic+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+printf "%s\n" "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+printf %s "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if test ${lt_cv_prog_compiler_pic_works+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"  ## exclude from sc_useless_quotes_in_assignment
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+printf "%s\n" "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_pic_works"; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+printf %s "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if test ${lt_cv_prog_compiler_static_works+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS=$LDFLAGS
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS=$save_LDFLAGS
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+printf "%s\n" "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_static_works"; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+printf %s "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test ${lt_cv_prog_compiler_c_o+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+printf "%s\n" "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+printf %s "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test ${lt_cv_prog_compiler_c_o+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+printf "%s\n" "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then
+  # do not overwrite the value of need_locks provided by the user
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+printf %s "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+printf "%s\n" "$hard_links" >&6; }
+  if test no = "$hard_links"; then
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+printf "%s\n" "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+printf %s "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ' (' and ')$', so one must not match beginning or
+  # end of line.  Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+  # as well as any symbol that contains 'd'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ and ICC port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++ or Intel C++ Compiler.
+    if test yes != "$GCC"; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++ or ICC)
+    with_gnu_ld=yes
+    ;;
+  openbsd* | bitrig*)
+    with_gnu_ld=no
+    ;;
+  linux* | k*bsd*-gnu | gnu*)
+    link_all_deplibs=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test yes = "$with_gnu_ld"; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test yes = "$lt_use_gnu_ld_interface"; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='$wl'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+    export_dynamic_flag_spec='$wl--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test ia64 != "$host_cpu"; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='$wl--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file, use it as
+	# is; otherwise, prepend EXPORTS...
+	archive_expsym_cmds='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+          cp $export_symbols $output_objdir/$soname.def;
+        else
+          echo EXPORTS > $output_objdir/$soname.def;
+          cat $export_symbols >> $output_objdir/$soname.def;
+        fi~
+        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      shrext_cmds=.dll
+      archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes=yes
+      file_list_spec='@'
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+      export_dynamic_flag_spec='$wl-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test linux-dietlibc = "$host_os"; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test no = "$tmp_diet"
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+        nagfor*)                        # NAGFOR 5.3
+          tmp_sharedflag='-Wl,-shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | $SED 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+
+        if test yes = "$supports_anon_versioning"; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+            cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+            echo "local: *; };" >> $output_objdir/$libname.ver~
+            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	tcc*)
+	  hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+	  export_dynamic_flag_spec='-rdynamic'
+	  ;;
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test yes = "$supports_anon_versioning"; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+              cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+              echo "local: *; };" >> $output_objdir/$libname.ver~
+              $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test no = "$ld_shlibs"; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test ia64 = "$host_cpu"; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to GNU nm, but means don't demangle to AIX nm.
+	# Without the "-l" option, or with the "-B" option, AIX nm treats
+	# weak defined symbols like other global defined symbols, whereas
+	# GNU nm marks them as "W".
+	# While the 'weak' keyword is ignored in the Export File, we need
+	# it in the Import File for the 'aix-soname' feature, so we have
+	# to replace the "-B" option with "-P" for AIX nm.
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# have runtime linking enabled, and use it for executables.
+	# For shared libraries, we enable/disable runtime linking
+	# depending on the kind of the shared library created -
+	# when "with_aix_soname,aix_use_runtimelinking" is:
+	# "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "aix,yes"  lib.so          shared, rtl:yes, for executables
+	#            lib.a           static archive
+	# "both,no"  lib.so.V(shr.o) shared, rtl:yes
+	#            lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a(lib.so.V) shared, rtl:no
+	# "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a           static archive
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	    # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	    # so we don't have lib.a shared libs to link our executables.
+	    # We have to force runtime linking in this case.
+	    aix_use_runtimelinking=yes
+	    LDFLAGS="$LDFLAGS -Wl,-brtl"
+	  fi
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='$wl-f,'
+      case $with_aix_soname,$aix_use_runtimelinking in
+      aix,*) ;; # traditional, no import file
+      svr4,* | *,yes) # use import file
+	# The Import File defines what to hardcode.
+	hardcode_direct=no
+	hardcode_direct_absolute=no
+	;;
+      esac
+
+      if test yes = "$GCC"; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`$CC -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test yes = "$aix_use_runtimelinking"; then
+	  shared_flag="$shared_flag "'$wl-G'
+	fi
+	# Need to ensure runtime linking is disabled for the traditional
+	# shared library, or the linker may eventually find shared libraries
+	# /with/ Import File - we do not want to mix them.
+	shared_flag_aix='-shared'
+	shared_flag_svr4='-shared $wl-G'
+      else
+	# not using gcc
+	if test ia64 = "$host_cpu"; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag='$wl-G'
+	  else
+	    shared_flag='$wl-bM:SRE'
+	  fi
+	  shared_flag_aix='$wl-bM:SRE'
+	  shared_flag_svr4='$wl-G'
+	fi
+      fi
+
+      export_dynamic_flag_spec='$wl-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test set = "${lt_cv_aix_libpath+set}"; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if test ${lt_cv_aix_libpath_+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"
+then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=/usr/lib:/lib
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+      else
+	if test ia64 = "$host_cpu"; then
+	  hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test set = "${lt_cv_aix_libpath+set}"; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if test ${lt_cv_aix_libpath_+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"
+then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=/usr/lib:/lib
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' $wl-bernotok'
+	  allow_undefined_flag=' $wl-berok'
+	  if test yes = "$with_gnu_ld"; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	  # -brtl affects multiple linker settings, -berok does not and is overridden later
+	  compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+	  if test svr4 != "$with_aix_soname"; then
+	    # This is similar to how AIX traditionally builds its shared libraries.
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	  fi
+	  if test aix != "$with_aix_soname"; then
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	  else
+	    # used by -dlpreopen to get the symbols
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	  fi
+	  archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++ or Intel C++ Compiler.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl* | icl*)
+	# Native MSVC or ICC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=.dll
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	archive_expsym_cmds='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+            cp "$export_symbols" "$output_objdir/$soname.def";
+            echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+          else
+            $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+          fi~
+          $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+          linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+          lt_tool_outputfile="@TOOL_OUTPUT@"~
+          case $lt_outputfile in
+            *.exe|*.EXE) ;;
+            *)
+              lt_outputfile=$lt_outputfile.exe
+              lt_tool_outputfile=$lt_tool_outputfile.exe
+              ;;
+          esac~
+          if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+            $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+            $RM "$lt_outputfile.manifest";
+          fi'
+	;;
+      *)
+	# Assume MSVC and ICC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=.dll
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test yes = "$lt_cv_ld_force_load"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag=$_lt_dar_allow_undefined
+  case $cc_basename in
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test yes = "$_lt_dar_can_shared"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    archive_expsym_cmds="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds="$SED -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly* | midnightbsd*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test yes = "$GCC"; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='$wl+b $wl$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='$wl-E'
+      ;;
+
+    hpux10*)
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec='$wl+b $wl$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='$wl-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+printf %s "checking if $CC understands -b... " >&6; }
+if test ${lt_cv_prog_compiler__b+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS=$LDFLAGS
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS=$save_LDFLAGS
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+printf "%s\n" "$lt_cv_prog_compiler__b" >&6; }
+
+if test yes = "$lt_cv_prog_compiler__b"; then
+    archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec='$wl+b $wl$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='$wl-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+printf %s "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if test ${lt_cv_irix_exported_symbol+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  save_LDFLAGS=$LDFLAGS
+	   LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"
+then :
+  lt_cv_irix_exported_symbol=yes
+else $as_nop
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS=$save_LDFLAGS
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+printf "%s\n" "$lt_cv_irix_exported_symbol" >&6; }
+	if test yes = "$lt_cv_irix_exported_symbol"; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
+	fi
+	link_all_deplibs=no
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    linux*)
+      case $cc_basename in
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	ld_shlibs=yes
+	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+	;;
+      esac
+      ;;
+
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd* | bitrig*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+	  export_dynamic_flag_spec='$wl-E'
+	else
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      shrext_cmds=.dll
+      archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes=yes
+      file_list_spec='@'
+      ;;
+
+    osf3*)
+      if test yes = "$GCC"; then
+	allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test yes = "$GCC"; then
+	allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+	archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+          $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test yes = "$GCC"; then
+	wlarc='$wl'
+	archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+          $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+            $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='$wl'
+	  archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+            $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands '-z linker_flag'.  GCC discards it without '$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test yes = "$GCC"; then
+	  whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test sequent = "$host_vendor"; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='$wl-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We CANNOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='$wl-z,text'
+      allow_undefined_flag='$wl-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='$wl-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='$wl-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test sni = "$host_vendor"; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='$wl-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+printf "%s\n" "$ld_shlibs" >&6; }
+test no = "$ld_shlibs" && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test yes,yes = "$GCC,$enable_shared"; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+printf %s "checking whether -lc should be explicitly linked in... " >&6; }
+if test ${lt_cv_archive_cmds_need_lc+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+printf "%s\n" "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+printf %s "checking dynamic linker characteristics... " >&6; }
+
+if test yes = "$GCC"; then
+  case $host_os in
+    darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+    *) lt_awk_arg='/^libraries:/' ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;;
+    *) lt_sed_strip_eq='s|=/|/|g' ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary...
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  # ...but if some path component already ends with the multilib dir we assume
+  # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+  case "$lt_multi_os_dir; $lt_search_path_spec " in
+  "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+    lt_multi_os_dir=
+    ;;
+  esac
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+    elif test -n "$lt_multi_os_dir"; then
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS = " "; FS = "/|\n";} {
+  lt_foo = "";
+  lt_count = 0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo = "/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's|/\([A-Za-z]:\)|\1|g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=.so
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='$libname$release$shared_ext$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test ia64 = "$host_cpu"; then
+    # AIX 5 supports IA64
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a(lib.so.V)'
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='$libname$shared_ext'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo $libname | $SED -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo $libname | $SED -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl* | *,icl*)
+    # Native MSVC or ICC
+    libname_spec='$name'
+    soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec=$LIB
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC and ICC wrapper
+    library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly* | midnightbsd*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
+    fi
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test yes = "$lt_cv_prog_gnu_ld"; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  hardcode_libdir_flag_spec='-L$libdir'
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if test ${lt_cv_shlibpath_overrides_runpath+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"
+then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null
+then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd* | bitrig*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec=/usr/lib
+  need_lib_prefix=no
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
+  else
+    need_version=yes
+  fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+os2*)
+  libname_spec='$name'
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test yes = "$with_gnu_ld"; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec; then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=sco
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test yes = "$with_gnu_ld"; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+printf "%s\n" "$dynamic_linker" >&6; }
+test no = "$dynamic_linker" && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test yes = "$GCC"; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
+fi
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
+fi
+
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+printf %s "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test yes = "$hardcode_automatic"; then
+
+  # We can hardcode non-existent directories.
+  if test no != "$hardcode_direct" &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" &&
+     test no != "$hardcode_minus_L"; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+printf "%s\n" "$hardcode_action" >&6; }
+
+if test relink = "$hardcode_action" ||
+   test yes = "$inherit_rpath"; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test yes != "$enable_dlopen"; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen=load_add_on
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen=LoadLibrary
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+    # if libdl is installed we need to link against it
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+printf %s "checking for dlopen in -ldl... " >&6; }
+if test ${ac_cv_lib_dl_dlopen+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main (void)
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"
+then :
+  ac_cv_lib_dl_dlopen=yes
+else $as_nop
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+printf "%s\n" "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes
+then :
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
+else $as_nop
+
+    lt_cv_dlopen=dyld
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  tpf*)
+    # Don't try to run any link tests for TPF.  We know it's impossible
+    # because TPF is a cross-compiler, and we know how we open DSOs.
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=no
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes
+then :
+  lt_cv_dlopen=shl_load
+else $as_nop
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+printf %s "checking for shl_load in -ldld... " >&6; }
+if test ${ac_cv_lib_dld_shl_load+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+char shl_load ();
+int
+main (void)
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"
+then :
+  ac_cv_lib_dld_shl_load=yes
+else $as_nop
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+printf "%s\n" "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes
+then :
+  lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld
+else $as_nop
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes
+then :
+  lt_cv_dlopen=dlopen
+else $as_nop
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+printf %s "checking for dlopen in -ldl... " >&6; }
+if test ${ac_cv_lib_dl_dlopen+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main (void)
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"
+then :
+  ac_cv_lib_dl_dlopen=yes
+else $as_nop
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+printf "%s\n" "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes
+then :
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
+else $as_nop
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+printf %s "checking for dlopen in -lsvld... " >&6; }
+if test ${ac_cv_lib_svld_dlopen+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main (void)
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"
+then :
+  ac_cv_lib_svld_dlopen=yes
+else $as_nop
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+printf "%s\n" "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes
+then :
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld
+else $as_nop
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+printf %s "checking for dld_link in -ldld... " >&6; }
+if test ${ac_cv_lib_dld_dld_link+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+char dld_link ();
+int
+main (void)
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"
+then :
+  ac_cv_lib_dld_dld_link=yes
+else $as_nop
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+printf "%s\n" "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes
+then :
+  lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test no = "$lt_cv_dlopen"; then
+    enable_dlopen=no
+  else
+    enable_dlopen=yes
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS=$CPPFLAGS
+    test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS=$LDFLAGS
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS=$LIBS
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+printf %s "checking whether a program can dlopen itself... " >&6; }
+if test ${lt_cv_dlopen_self+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  	  if test yes = "$cross_compiling"; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisibility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+printf "%s\n" "$lt_cv_dlopen_self" >&6; }
+
+    if test yes = "$lt_cv_dlopen_self"; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+printf %s "checking whether a statically linked program can dlopen itself... " >&6; }
+if test ${lt_cv_dlopen_self_static+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  	  if test yes = "$cross_compiling"; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisibility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+printf "%s\n" "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS=$save_CPPFLAGS
+    LDFLAGS=$save_LDFLAGS
+    LIBS=$save_LIBS
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+printf %s "checking whether stripping libraries is possible... " >&6; }
+if test -z "$STRIP"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+else
+  if $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+    old_striplib="$STRIP --strip-debug"
+    striplib="$STRIP --strip-unneeded"
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+printf "%s\n" "yes" >&6; }
+  else
+    case $host_os in
+    darwin*)
+      # FIXME - insert some real tests, host_os isn't really good enough
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+printf "%s\n" "yes" >&6; }
+      ;;
+    freebsd*)
+      if $STRIP -V 2>&1 | $GREP "elftoolchain" >/dev/null; then
+        old_striplib="$STRIP --strip-debug"
+        striplib="$STRIP --strip-unneeded"
+        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+printf "%s\n" "yes" >&6; }
+      else
+        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+      fi
+      ;;
+    *)
+      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+      ;;
+    esac
+  fi
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report what library types will actually be built
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+printf %s "checking if libtool supports shared libraries... " >&6; }
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+printf "%s\n" "$can_build_shared" >&6; }
+
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+printf %s "checking whether to build shared libraries... " >&6; }
+  test no = "$can_build_shared" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test yes = "$enable_shared" && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test ia64 != "$host_cpu"; then
+      case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+      yes,aix,yes) ;;			# shared object as lib.so file only
+      yes,svr4,*) ;;			# shared object as lib.so archive member only
+      yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+      esac
+    fi
+    ;;
+  esac
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+printf "%s\n" "$enable_shared" >&6; }
+
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+printf %s "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test yes = "$enable_shared" || enable_static=yes
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+printf "%s\n" "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC=$lt_save_CC
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+# Checks for programs.
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+
+
+
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+  if test -n "$CCC"; then
+    CXX=$CCC
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC clang++
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_CXX+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$CXX"; then
+  ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
+printf "%s\n" "$CXX" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+    test -n "$CXX" && break
+  done
+fi
+if test -z "$CXX"; then
+  ac_ct_CXX=$CXX
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC clang++
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_CXX+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_CXX"; then
+  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CXX="$ac_prog"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
+printf "%s\n" "$ac_ct_CXX" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CXX" && break
+done
+
+  if test "x$ac_ct_CXX" = x; then
+    CXX="g++"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CXX=$ac_ct_CXX
+  fi
+fi
+
+  fi
+fi
+# Provide some information about the compiler.
+printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether the compiler supports GNU C++" >&5
+printf %s "checking whether the compiler supports GNU C++... " >&6; }
+if test ${ac_cv_cxx_compiler_gnu+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"
+then :
+  ac_compiler_gnu=yes
+else $as_nop
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
+printf "%s\n" "$ac_cv_cxx_compiler_gnu" >&6; }
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+if test $ac_compiler_gnu = yes; then
+  GXX=yes
+else
+  GXX=
+fi
+ac_test_CXXFLAGS=${CXXFLAGS+y}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
+printf %s "checking whether $CXX accepts -g... " >&6; }
+if test ${ac_cv_prog_cxx_g+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+   ac_cxx_werror_flag=yes
+   ac_cv_prog_cxx_g=no
+   CXXFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"
+then :
+  ac_cv_prog_cxx_g=yes
+else $as_nop
+  CXXFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"
+then :
+
+else $as_nop
+  ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+	 CXXFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"
+then :
+  ac_cv_prog_cxx_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
+printf "%s\n" "$ac_cv_prog_cxx_g" >&6; }
+if test $ac_test_CXXFLAGS; then
+  CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+  if test "$GXX" = yes; then
+    CXXFLAGS="-g -O2"
+  else
+    CXXFLAGS="-g"
+  fi
+else
+  if test "$GXX" = yes; then
+    CXXFLAGS="-O2"
+  else
+    CXXFLAGS=
+  fi
+fi
+ac_prog_cxx_stdcxx=no
+if test x$ac_prog_cxx_stdcxx = xno
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $CXX option to enable C++11 features" >&5
+printf %s "checking for $CXX option to enable C++11 features... " >&6; }
+if test ${ac_cv_prog_cxx_cxx11+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_cv_prog_cxx_cxx11=no
+ac_save_CXX=$CXX
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_cxx_conftest_cxx11_program
+_ACEOF
+for ac_arg in '' -std=gnu++11 -std=gnu++0x -std=c++11 -std=c++0x -qlanglvl=extended0x -AA
+do
+  CXX="$ac_save_CXX $ac_arg"
+  if ac_fn_cxx_try_compile "$LINENO"
+then :
+  ac_cv_prog_cxx_cxx11=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam
+  test "x$ac_cv_prog_cxx_cxx11" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CXX=$ac_save_CXX
+fi
+
+if test "x$ac_cv_prog_cxx_cxx11" = xno
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+printf "%s\n" "unsupported" >&6; }
+else $as_nop
+  if test "x$ac_cv_prog_cxx_cxx11" = x
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+printf "%s\n" "none needed" >&6; }
+else $as_nop
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_cxx11" >&5
+printf "%s\n" "$ac_cv_prog_cxx_cxx11" >&6; }
+     CXX="$CXX $ac_cv_prog_cxx_cxx11"
+fi
+  ac_cv_prog_cxx_stdcxx=$ac_cv_prog_cxx_cxx11
+  ac_prog_cxx_stdcxx=cxx11
+fi
+fi
+if test x$ac_prog_cxx_stdcxx = xno
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $CXX option to enable C++98 features" >&5
+printf %s "checking for $CXX option to enable C++98 features... " >&6; }
+if test ${ac_cv_prog_cxx_cxx98+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_cv_prog_cxx_cxx98=no
+ac_save_CXX=$CXX
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_cxx_conftest_cxx98_program
+_ACEOF
+for ac_arg in '' -std=gnu++98 -std=c++98 -qlanglvl=extended -AA
+do
+  CXX="$ac_save_CXX $ac_arg"
+  if ac_fn_cxx_try_compile "$LINENO"
+then :
+  ac_cv_prog_cxx_cxx98=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam
+  test "x$ac_cv_prog_cxx_cxx98" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CXX=$ac_save_CXX
+fi
+
+if test "x$ac_cv_prog_cxx_cxx98" = xno
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+printf "%s\n" "unsupported" >&6; }
+else $as_nop
+  if test "x$ac_cv_prog_cxx_cxx98" = x
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+printf "%s\n" "none needed" >&6; }
+else $as_nop
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_cxx98" >&5
+printf "%s\n" "$ac_cv_prog_cxx_cxx98" >&6; }
+     CXX="$CXX $ac_cv_prog_cxx_cxx98"
+fi
+  ac_cv_prog_cxx_stdcxx=$ac_cv_prog_cxx_cxx98
+  ac_prog_cxx_stdcxx=cxx98
+fi
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+depcc="$CXX"  am_compiler_list=
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+printf %s "checking dependency style of $depcc... " >&6; }
+if test ${am_cv_CXX_dependencies_compiler_type+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CXX_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CXX_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
+printf "%s\n" "$am_cv_CXX_dependencies_compiler_type" >&6; }
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+  am__fastdepCXX_TRUE=
+  am__fastdepCXX_FALSE='#'
+else
+  am__fastdepCXX_TRUE='#'
+  am__fastdepCXX_FALSE=
+fi
+
+
+
+
+func_stripname_cnf ()
+{
+  case $2 in
+  .*) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%\\\\$2\$%%"`;;
+  *)  func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%$2\$%%"`;;
+  esac
+} # func_stripname_cnf
+
+      if test -n "$CXX" && ( test no != "$CXX" &&
+    ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+    (test g++ != "$CXX"))); then
+  ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+printf %s "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+  if test ${ac_cv_prog_CXXCPP+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+      # Double quotes because $CXX needs to be expanded
+    for CXXCPP in "$CXX -E" cpp /lib/cpp
+    do
+      ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <limits.h>
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"
+then :
+
+else $as_nop
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"
+then :
+  # Broken: success on invalid input.
+continue
+else $as_nop
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok
+then :
+  break
+fi
+
+    done
+    ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+  CXXCPP=$ac_cv_prog_CXXCPP
+else
+  ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+printf "%s\n" "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <limits.h>
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"
+then :
+
+else $as_nop
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"
+then :
+  # Broken: success on invalid input.
+continue
+else $as_nop
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok
+then :
+
+else $as_nop
+  { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+else
+  _lt_caught_CXX_error=yes
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+compiler_needs_object_CXX=no
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_direct_absolute_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
+hardcode_automatic_CXX=no
+inherit_rpath_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+reload_flag_CXX=$reload_flag
+reload_cmds_CXX=$reload_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_caught_CXX_error"; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+  # save warnings/boilerplate of simple test code
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_CFLAGS=$CFLAGS
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  CFLAGS=$CXXFLAGS
+  compiler=$CC
+  compiler_CXX=$CC
+  func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
+
+
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test yes = "$GXX"; then
+      lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+    else
+      lt_prog_compiler_no_builtin_flag_CXX=
+    fi
+
+    if test yes = "$GXX"; then
+      # Set up default GNU C++ configuration
+
+
+
+# Check whether --with-gnu-ld was given.
+if test ${with_gnu_ld+y}
+then :
+  withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
+else $as_nop
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test yes = "$GCC"; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+printf %s "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return, which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD=$ac_prog
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test yes = "$with_gnu_ld"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+printf %s "checking for GNU ld... " >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+printf %s "checking for non-GNU ld... " >&6; }
+fi
+if test ${lt_cv_path_LD+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -z "$LD"; then
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD=$ac_dir/$ac_prog
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test no != "$with_gnu_ld" && break
+	;;
+      *)
+	test yes != "$with_gnu_ld" && break
+	;;
+      esac
+    fi
+  done
+  IFS=$lt_save_ifs
+else
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
+fi
+fi
+
+LD=$lt_cv_path_LD
+if test -n "$LD"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+printf "%s\n" "$LD" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+printf %s "checking if the linker ($LD) is GNU ld... " >&6; }
+if test ${lt_cv_prog_gnu_ld+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+printf "%s\n" "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test yes = "$with_gnu_ld"; then
+        archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+        archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+
+        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+        export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='$wl'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+        else
+          whole_archive_flag_spec_CXX=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
+
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
+
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
+
+    # PORTME: fill in a description of your system's C++ link characteristics
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+printf %s "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+    ld_shlibs_CXX=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+      aix[4-9]*)
+        if test ia64 = "$host_cpu"; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=
+        else
+          aix_use_runtimelinking=no
+
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # have runtime linking enabled, and use it for executables.
+          # For shared libraries, we enable/disable runtime linking
+          # depending on the kind of the shared library created -
+          # when "with_aix_soname,aix_use_runtimelinking" is:
+          # "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "aix,yes"  lib.so          shared, rtl:yes, for executables
+          #            lib.a           static archive
+          # "both,no"  lib.so.V(shr.o) shared, rtl:yes
+          #            lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a(lib.so.V) shared, rtl:no
+          # "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a           static archive
+          case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	      # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	      # so we don't have lib.a shared libs to link our executables.
+	      # We have to force runtime linking in this case.
+	      aix_use_runtimelinking=yes
+	      LDFLAGS="$LDFLAGS -Wl,-brtl"
+	    fi
+	    ;;
+          esac
+
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
+
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        archive_cmds_CXX=''
+        hardcode_direct_CXX=yes
+        hardcode_direct_absolute_CXX=yes
+        hardcode_libdir_separator_CXX=':'
+        link_all_deplibs_CXX=yes
+        file_list_spec_CXX='$wl-f,'
+        case $with_aix_soname,$aix_use_runtimelinking in
+        aix,*) ;;	# no import file
+        svr4,* | *,yes) # use import file
+          # The Import File defines what to hardcode.
+          hardcode_direct_CXX=no
+          hardcode_direct_absolute_CXX=no
+          ;;
+        esac
+
+        if test yes = "$GXX"; then
+          case $host_os in aix4.[012]|aix4.[012].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`$CC -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    hardcode_direct_CXX=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    hardcode_minus_L_CXX=yes
+	    hardcode_libdir_flag_spec_CXX='-L$libdir'
+	    hardcode_libdir_separator_CXX=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag=$shared_flag' $wl-G'
+	  fi
+	  # Need to ensure runtime linking is disabled for the traditional
+	  # shared library, or the linker may eventually find shared libraries
+	  # /with/ Import File - we do not want to mix them.
+	  shared_flag_aix='-shared'
+	  shared_flag_svr4='-shared $wl-G'
+        else
+          # not using gcc
+          if test ia64 = "$host_cpu"; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test yes = "$aix_use_runtimelinking"; then
+	      shared_flag='$wl-G'
+	    else
+	      shared_flag='$wl-bM:SRE'
+	    fi
+	    shared_flag_aix='$wl-bM:SRE'
+	    shared_flag_svr4='$wl-G'
+          fi
+        fi
+
+        export_dynamic_flag_spec_CXX='$wl-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        always_export_symbols_CXX=yes
+	if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          # The "-G" linker flag allows undefined symbols.
+          no_undefined_flag_CXX='-bernotok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          if test set = "${lt_cv_aix_libpath+set}"; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if test ${lt_cv_aix_libpath__CXX+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"
+then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=/usr/lib:/lib
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+          hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
+
+          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+        else
+          if test ia64 = "$host_cpu"; then
+	    hardcode_libdir_flag_spec_CXX='$wl-R $libdir:/usr/lib:/lib'
+	    allow_undefined_flag_CXX="-z nodefs"
+	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    if test set = "${lt_cv_aix_libpath+set}"; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if test ${lt_cv_aix_libpath__CXX+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"
+then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=/usr/lib:/lib
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+	    hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    no_undefined_flag_CXX=' $wl-bernotok'
+	    allow_undefined_flag_CXX=' $wl-berok'
+	    if test yes = "$with_gnu_ld"; then
+	      # We only use this code for GNU lds that support --whole-archive.
+	      whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
+	    else
+	      # Exported symbols can be pulled into shared objects from archives
+	      whole_archive_flag_spec_CXX='$convenience'
+	    fi
+	    archive_cmds_need_lc_CXX=yes
+	    archive_expsym_cmds_CXX='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	    # -brtl affects multiple linker settings, -berok does not and is overridden later
+	    compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+	    if test svr4 != "$with_aix_soname"; then
+	      # This is similar to how AIX traditionally builds its shared
+	      # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	    fi
+	    if test aix != "$with_aix_soname"; then
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	    else
+	      # used by -dlpreopen to get the symbols
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	    fi
+	    archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$RM -r $output_objdir/$realname.d'
+          fi
+        fi
+        ;;
+
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  allow_undefined_flag_CXX=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	else
+	  ld_shlibs_CXX=no
+	fi
+	;;
+
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	  ;;
+        esac
+        ;;
+
+      cygwin* | mingw* | pw32* | cegcc*)
+	case $GXX,$cc_basename in
+	,cl* | no,cl* | ,icl* | no,icl*)
+	  # Native MSVC or ICC
+	  # hardcode_libdir_flag_spec is actually meaningless, as there is
+	  # no search path for DLLs.
+	  hardcode_libdir_flag_spec_CXX=' '
+	  allow_undefined_flag_CXX=unsupported
+	  always_export_symbols_CXX=yes
+	  file_list_spec_CXX='@'
+	  # Tell ltmain to make .lib files, not .a files.
+	  libext=lib
+	  # Tell ltmain to make .dll files, not .so files.
+	  shrext_cmds=.dll
+	  # FIXME: Setting linknames here is a bad hack.
+	  archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	  archive_expsym_cmds_CXX='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+              cp "$export_symbols" "$output_objdir/$soname.def";
+              echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+            else
+              $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+            fi~
+            $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+            linknames='
+	  # The linker will not automatically build a static lib if we build a DLL.
+	  # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
+	  enable_shared_with_static_runtimes_CXX=yes
+	  # Don't use ranlib
+	  old_postinstall_cmds_CXX='chmod 644 $oldlib'
+	  postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
+            lt_tool_outputfile="@TOOL_OUTPUT@"~
+            case $lt_outputfile in
+              *.exe|*.EXE) ;;
+              *)
+                lt_outputfile=$lt_outputfile.exe
+                lt_tool_outputfile=$lt_tool_outputfile.exe
+                ;;
+            esac~
+            func_to_tool_file "$lt_outputfile"~
+            if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+              $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+              $RM "$lt_outputfile.manifest";
+            fi'
+	  ;;
+	*)
+	  # g++
+	  # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+	  # as there is no search path for DLLs.
+	  hardcode_libdir_flag_spec_CXX='-L$libdir'
+	  export_dynamic_flag_spec_CXX='$wl--export-all-symbols'
+	  allow_undefined_flag_CXX=unsupported
+	  always_export_symbols_CXX=no
+	  enable_shared_with_static_runtimes_CXX=yes
+
+	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file, use it as
+	    # is; otherwise, prepend EXPORTS...
+	    archive_expsym_cmds_CXX='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+              cp $export_symbols $output_objdir/$soname.def;
+            else
+              echo EXPORTS > $output_objdir/$soname.def;
+              cat $export_symbols >> $output_objdir/$soname.def;
+            fi~
+            $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	  else
+	    ld_shlibs_CXX=no
+	  fi
+	  ;;
+	esac
+	;;
+      darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc_CXX=no
+  hardcode_direct_CXX=no
+  hardcode_automatic_CXX=yes
+  hardcode_shlibpath_var_CXX=unsupported
+  if test yes = "$lt_cv_ld_force_load"; then
+    whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec_CXX=''
+  fi
+  link_all_deplibs_CXX=yes
+  allow_undefined_flag_CXX=$_lt_dar_allow_undefined
+  case $cc_basename in
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test yes = "$_lt_dar_can_shared"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    archive_expsym_cmds_CXX="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds_CXX="$SED -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+       if test yes != "$lt_cv_apple_cc_single_mod"; then
+      archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+      archive_expsym_cmds_CXX="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
+    fi
+
+  else
+  ld_shlibs_CXX=no
+  fi
+
+	;;
+
+      os2*)
+	hardcode_libdir_flag_spec_CXX='-L$libdir'
+	hardcode_minus_L_CXX=yes
+	allow_undefined_flag_CXX=unsupported
+	shrext_cmds=.dll
+	archive_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	archive_expsym_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  prefix_cmds="$SED"~
+	  if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	    prefix_cmds="$prefix_cmds -e 1d";
+	  fi~
+	  prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	  cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	old_archive_From_new_cmds_CXX='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+	enable_shared_with_static_runtimes_CXX=yes
+	file_list_spec_CXX='@'
+	;;
+
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
+
+      freebsd2.*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        ld_shlibs_CXX=no
+        ;;
+
+      freebsd-elf*)
+        archive_cmds_need_lc_CXX=no
+        ;;
+
+      freebsd* | dragonfly* | midnightbsd*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        ld_shlibs_CXX=yes
+        ;;
+
+      haiku*)
+        archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+        link_all_deplibs_CXX=yes
+        ;;
+
+      hpux9*)
+        hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
+        hardcode_libdir_separator_CXX=:
+        export_dynamic_flag_spec_CXX='$wl-E'
+        hardcode_direct_CXX=yes
+        hardcode_minus_L_CXX=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            ld_shlibs_CXX=no
+            ;;
+          aCC*)
+            archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP " \-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            ;;
+          *)
+            if test yes = "$GXX"; then
+              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              ld_shlibs_CXX=no
+            fi
+            ;;
+        esac
+        ;;
+
+      hpux10*|hpux11*)
+        if test no = "$with_gnu_ld"; then
+	  hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
+	  hardcode_libdir_separator_CXX=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      export_dynamic_flag_spec_CXX='$wl-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            hardcode_direct_CXX=no
+            hardcode_shlibpath_var_CXX=no
+            ;;
+          *)
+            hardcode_direct_CXX=yes
+            hardcode_direct_absolute_CXX=yes
+            hardcode_minus_L_CXX=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP " \-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+          *)
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
+	        case $host_cpu in
+	          hppa*64*)
+	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      ld_shlibs_CXX=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      interix[3-9]*)
+	hardcode_direct_CXX=no
+	hardcode_shlibpath_var_CXX=no
+	hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	export_dynamic_flag_spec_CXX='$wl-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	archive_expsym_cmds_CXX='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	      else
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
+	      fi
+	    fi
+	    link_all_deplibs_CXX=yes
+	    ;;
+        esac
+        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+        hardcode_libdir_separator_CXX=:
+        inherit_rpath_CXX=yes
+        ;;
+
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    archive_cmds_need_lc_CXX=no
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [1-5].* | *pgcpp\ [1-5].*)
+	      prelink_cmds_CXX='tpldir=Template.dir~
+               rm -rf $tpldir~
+               $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+               compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+	      old_archive_cmds_CXX='tpldir=Template.dir~
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+                $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+                $RANLIB $oldlib'
+	      archive_cmds_CXX='tpldir=Template.dir~
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	      archive_expsym_cmds_CXX='tpldir=Template.dir~
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 and above use weak symbols
+	      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+	      ;;
+	    esac
+
+	    hardcode_libdir_flag_spec_CXX='$wl--rpath $wl$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    whole_archive_flag_spec_CXX='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname  -o $lib $wl-retain-symbols-file $wl$export_symbols'
+
+	    runpath_var=LD_RUN_PATH
+	    hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+	    hardcode_libdir_separator_CXX=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    ;;
+	  xl* | mpixl* | bgxl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    if test yes = "$supports_anon_versioning"; then
+	      archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
+                cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+                echo "local: *; };" >> $output_objdir/$libname.ver~
+                $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | $SED 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      no_undefined_flag_CXX=' -zdefs'
+	      archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      archive_expsym_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
+	      hardcode_libdir_flag_spec_CXX='-R$libdir'
+	      whole_archive_flag_spec_CXX='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	      compiler_needs_object_CXX=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='func_echo_all'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+
+      m88k*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+	;;
+
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+	esac
+	;;
+
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  hardcode_libdir_flag_spec_CXX='-R$libdir'
+	  hardcode_direct_CXX=yes
+	  hardcode_shlibpath_var_CXX=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
+
+      *nto* | *qnx*)
+        ld_shlibs_CXX=yes
+	;;
+
+      openbsd* | bitrig*)
+	if test -f /usr/libexec/ld.so; then
+	  hardcode_direct_CXX=yes
+	  hardcode_shlibpath_var_CXX=no
+	  hardcode_direct_absolute_CXX=yes
+	  archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+	    archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+	    export_dynamic_flag_spec_CXX='$wl-E'
+	    whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=func_echo_all
+	else
+	  ld_shlibs_CXX=no
+	fi
+	;;
+
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	    hardcode_libdir_separator_CXX=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
+	        archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+		;;
+	      *)
+	        allow_undefined_flag_CXX=' -expect_unresolved \*'
+	        archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	        archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+                  echo "-hidden">> $lib.exp~
+                  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+                  $RM $lib.exp'
+	        hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+		;;
+	    esac
+
+	    hardcode_libdir_separator_CXX=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+	  *)
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
+	      case $host in
+	        osf3*)
+	          archive_cmds_CXX='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+		  ;;
+	        *)
+	          archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+	      hardcode_libdir_separator_CXX=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      ld_shlibs_CXX=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      psos*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
+
+      solaris*)
+        case $cc_basename in
+          CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            archive_cmds_need_lc_CXX=yes
+	    no_undefined_flag_CXX=' -zdefs'
+	    archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+              $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    hardcode_libdir_flag_spec_CXX='-R$libdir'
+	    hardcode_shlibpath_var_CXX=no
+	    case $host_os in
+	      solaris2.[0-5] | solaris2.[0-5].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands '-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    link_all_deplibs_CXX=yes
+
+	    output_verbose_link_cmd='func_echo_all'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+
+	    # The C++ compiler must be used to create the archive.
+	    old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      no_undefined_flag_CXX=' $wl-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+                  $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
+	      else
+	        # g++ 2.7 appears to require '-G' NOT '-shared' on this
+	        # platform.
+	        archive_cmds_CXX='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+                  $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
+	      fi
+
+	      hardcode_libdir_flag_spec_CXX='$wl-R $wl$libdir'
+	      case $host_os in
+		solaris2.[0-5] | solaris2.[0-5].*) ;;
+		*)
+		  whole_archive_flag_spec_CXX='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_CXX='$wl-z,text'
+      archive_cmds_need_lc_CXX=no
+      hardcode_shlibpath_var_CXX=no
+      runpath_var='LD_RUN_PATH'
+
+      case $cc_basename in
+        CC*)
+	  archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
+
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We CANNOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	no_undefined_flag_CXX='$wl-z,text'
+	allow_undefined_flag_CXX='$wl-z,nodefs'
+	archive_cmds_need_lc_CXX=no
+	hardcode_shlibpath_var_CXX=no
+	hardcode_libdir_flag_spec_CXX='$wl-R,$libdir'
+	hardcode_libdir_separator_CXX=':'
+	link_all_deplibs_CXX=yes
+	export_dynamic_flag_spec_CXX='$wl-Bexport'
+	runpath_var='LD_RUN_PATH'
+
+	case $cc_basename in
+          CC*)
+	    archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
+              '"$old_archive_cmds_CXX"
+	    reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
+              '"$reload_cmds_CXX"
+	    ;;
+	  *)
+	    archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
+
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
+
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+
+      *)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+    esac
+
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+printf "%s\n" "$ld_shlibs_CXX" >&6; }
+    test no = "$ld_shlibs_CXX" && can_build_shared=no
+
+    GCC_CXX=$GXX
+    LD_CXX=$LD
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    # Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
+
+cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case $prev$p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test x-L = "$p" ||
+          test x-R = "$p"; then
+	 prev=$p
+	 continue
+       fi
+
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
+       if test no = "$pre_test_object_deps_done"; then
+	 case $prev in
+	 -L | -R)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$compiler_lib_search_path_CXX"; then
+	     compiler_lib_search_path_CXX=$prev$p
+	   else
+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} $prev$p"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$postdeps_CXX"; then
+	   postdeps_CXX=$prev$p
+	 else
+	   postdeps_CXX="${postdeps_CXX} $prev$p"
+	 fi
+       fi
+       prev=
+       ;;
+
+    *.lto.$objext) ;; # Ignore GCC LTO objects
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test no = "$pre_test_object_deps_done"; then
+	 if test -z "$predep_objects_CXX"; then
+	   predep_objects_CXX=$p
+	 else
+	   predep_objects_CXX="$predep_objects_CXX $p"
+	 fi
+       else
+	 if test -z "$postdep_objects_CXX"; then
+	   postdep_objects_CXX=$p
+	 else
+	   postdep_objects_CXX="$postdep_objects_CXX $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling CXX test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix[3-9]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  predep_objects_CXX=
+  postdep_objects_CXX=
+  postdeps_CXX=
+  ;;
+esac
+
+
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+ compiler_lib_search_dirs_CXX=
+if test -n "${compiler_lib_search_path_CXX}"; then
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | $SED -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
+
+
+  # C++ specific cases for pic, static, wl, etc.
+  if test yes = "$GXX"; then
+    lt_prog_compiler_wl_CXX='-Wl,'
+    lt_prog_compiler_static_CXX='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test ia64 = "$host_cpu"; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_CXX='-Bstatic'
+      fi
+      lt_prog_compiler_pic_CXX='-fPIC'
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic_CXX='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
+            lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static_CXX='$wl-static'
+	;;
+      esac
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_CXX='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      lt_prog_compiler_pic_CXX=
+      ;;
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static_CXX=
+      ;;
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_CXX=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	;;
+      *)
+	lt_prog_compiler_pic_CXX='-fPIC'
+	;;
+      esac
+      ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_CXX='-fPIC -shared'
+      ;;
+    *)
+      lt_prog_compiler_pic_CXX='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[4-9]*)
+	# All AIX code is PIC.
+	if test ia64 = "$host_cpu"; then
+	  # AIX 5 now supports IA64 processor
+	  lt_prog_compiler_static_CXX='-Bstatic'
+	else
+	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+      mingw* | cygwin* | os2* | pw32* | cegcc*)
+	# This hack is so that the source file can tell whether it is being
+	# built for inclusion in a dll (and should export symbols for example).
+	lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+	;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly* | midnightbsd*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
+	    if test ia64 != "$host_cpu"; then
+	      lt_prog_compiler_pic_CXX='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      lt_prog_compiler_pic_CXX='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64, which still supported -KPIC.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fpic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  xlc* | xlC* | bgxl[cC]* | mpixl[cC]*)
+	    # IBM XL 8.0, 9.0 on PPC and BlueGene
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-qpic'
+	    lt_prog_compiler_static_CXX='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | $SED 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      lt_prog_compiler_pic_CXX='-KPIC'
+	      lt_prog_compiler_static_CXX='-Bstatic'
+	      lt_prog_compiler_wl_CXX='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    lt_prog_compiler_pic_CXX='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd* | netbsdelf*-gnu)
+	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        lt_prog_compiler_pic_CXX='-fPIC -shared'
+        ;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    lt_prog_compiler_wl_CXX='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    lt_prog_compiler_pic_CXX='-pic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	lt_prog_compiler_can_build_shared_CXX=no
+	;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms that do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_CXX=
+    ;;
+  *)
+    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
+    ;;
+esac
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+printf %s "checking for $compiler option to produce PIC... " >&6; }
+if test ${lt_cv_prog_compiler_pic_CXX+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5
+printf "%s\n" "$lt_cv_prog_compiler_pic_CXX" >&6; }
+lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+printf %s "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
+if test ${lt_cv_prog_compiler_pic_works_CXX+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_prog_compiler_pic_works_CXX=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"  ## exclude from sc_useless_quotes_in_assignment
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_CXX=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+printf "%s\n" "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_pic_works_CXX"; then
+    case $lt_prog_compiler_pic_CXX in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+     esac
+else
+    lt_prog_compiler_pic_CXX=
+     lt_prog_compiler_can_build_shared_CXX=no
+fi
+
+fi
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+printf %s "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if test ${lt_cv_prog_compiler_static_works_CXX+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_prog_compiler_static_works_CXX=no
+   save_LDFLAGS=$LDFLAGS
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_CXX=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_CXX=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS=$save_LDFLAGS
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+printf "%s\n" "$lt_cv_prog_compiler_static_works_CXX" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_static_works_CXX"; then
+    :
+else
+    lt_prog_compiler_static_CXX=
+fi
+
+
+
+
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+printf %s "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test ${lt_cv_prog_compiler_c_o_CXX+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_prog_compiler_c_o_CXX=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+printf "%s\n" "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+printf %s "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test ${lt_cv_prog_compiler_c_o_CXX+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_prog_compiler_c_o_CXX=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+printf "%s\n" "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o_CXX" && test no != "$need_locks"; then
+  # do not overwrite the value of need_locks provided by the user
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+printf %s "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+printf "%s\n" "$hard_links" >&6; }
+  if test no = "$hard_links"; then
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+printf "%s\n" "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+printf %s "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  case $host_os in
+  aix[4-9]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+    # Without the "-l" option, or with the "-B" option, AIX nm treats
+    # weak defined symbols like other global defined symbols, whereas
+    # GNU nm marks them as "W".
+    # While the 'weak' keyword is ignored in the Export File, we need
+    # it in the Import File for the 'aix-soname' feature, so we have
+    # to replace the "-B" option with "-P" for AIX nm.
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+    else
+      export_symbols_cmds_CXX='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    export_symbols_cmds_CXX=$ltdll_cmds
+    ;;
+  cygwin* | mingw* | cegcc*)
+    case $cc_basename in
+    cl* | icl*)
+      exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+      ;;
+    *)
+      export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+      ;;
+    esac
+    ;;
+  linux* | k*bsd*-gnu | gnu*)
+    link_all_deplibs_CXX=no
+    ;;
+  *)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+    ;;
+  esac
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+printf "%s\n" "$ld_shlibs_CXX" >&6; }
+test no = "$ld_shlibs_CXX" && can_build_shared=no
+
+with_gnu_ld_CXX=$with_gnu_ld
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_CXX=yes
+
+  if test yes,yes = "$GCC,$enable_shared"; then
+    case $archive_cmds_CXX in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+printf %s "checking whether -lc should be explicitly linked in... " >&6; }
+if test ${lt_cv_archive_cmds_need_lc_CXX+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl_CXX
+	  pic_flag=$lt_prog_compiler_pic_CXX
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+	  allow_undefined_flag_CXX=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc_CXX=no
+	  else
+	    lt_cv_archive_cmds_need_lc_CXX=yes
+	  fi
+	  allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5
+printf "%s\n" "$lt_cv_archive_cmds_need_lc_CXX" >&6; }
+      archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+printf %s "checking dynamic linker characteristics... " >&6; }
+
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=.so
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='$libname$release$shared_ext$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test ia64 = "$host_cpu"; then
+    # AIX 5 supports IA64
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a(lib.so.V)'
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='$libname$shared_ext'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo $libname | $SED -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo $libname | $SED -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl* | *,icl*)
+    # Native MSVC or ICC
+    libname_spec='$name'
+    soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec=$LIB
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC and ICC wrapper
+    library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly* | midnightbsd*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
+    fi
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test yes = "$lt_cv_prog_gnu_ld"; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  hardcode_libdir_flag_spec_CXX='-L$libdir'
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if test ${lt_cv_shlibpath_overrides_runpath+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"
+then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null
+then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd* | bitrig*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec=/usr/lib
+  need_lib_prefix=no
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
+  else
+    need_version=yes
+  fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+os2*)
+  libname_spec='$name'
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test yes = "$with_gnu_ld"; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec; then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=sco
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test yes = "$with_gnu_ld"; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+printf "%s\n" "$dynamic_linker" >&6; }
+test no = "$dynamic_linker" && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test yes = "$GCC"; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
+fi
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
+fi
+
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+printf %s "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" ||
+   test -n "$runpath_var_CXX" ||
+   test yes = "$hardcode_automatic_CXX"; then
+
+  # We can hardcode non-existent directories.
+  if test no != "$hardcode_direct_CXX" &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" &&
+     test no != "$hardcode_minus_L_CXX"; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_CXX=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_CXX=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_CXX=unsupported
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
+printf "%s\n" "$hardcode_action_CXX" >&6; }
+
+if test relink = "$hardcode_action_CXX" ||
+   test yes = "$inherit_rpath_CXX"; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test yes != "$_lt_caught_CXX_error"
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+# Checks for libraries.
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for pthread_create in -lpthread" >&5
+printf %s "checking for pthread_create in -lpthread... " >&6; }
+if test ${ac_cv_lib_pthread_pthread_create+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lpthread  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+namespace conftest {
+  extern "C" int pthread_create ();
+}
+int
+main (void)
+{
+return conftest::pthread_create ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"
+then :
+  ac_cv_lib_pthread_pthread_create=yes
+else $as_nop
+  ac_cv_lib_pthread_pthread_create=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_create" >&5
+printf "%s\n" "$ac_cv_lib_pthread_pthread_create" >&6; }
+if test "x$ac_cv_lib_pthread_pthread_create" = xyes
+then :
+  printf "%s\n" "#define HAVE_LIBPTHREAD 1" >>confdefs.h
+
+  LIBS="-lpthread $LIBS"
+
+fi
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for clock_gettime in -lrt" >&5
+printf %s "checking for clock_gettime in -lrt... " >&6; }
+if test ${ac_cv_lib_rt_clock_gettime+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lrt  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+namespace conftest {
+  extern "C" int clock_gettime ();
+}
+int
+main (void)
+{
+return conftest::clock_gettime ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"
+then :
+  ac_cv_lib_rt_clock_gettime=yes
+else $as_nop
+  ac_cv_lib_rt_clock_gettime=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_rt_clock_gettime" >&5
+printf "%s\n" "$ac_cv_lib_rt_clock_gettime" >&6; }
+if test "x$ac_cv_lib_rt_clock_gettime" = xyes
+then :
+  printf "%s\n" "#define HAVE_LIBRT 1" >>confdefs.h
+
+  LIBS="-lrt $LIBS"
+
+fi
+
+
+# Checks for header files.
+ac_fn_cxx_check_header_compile "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default"
+if test "x$ac_cv_header_stdlib_h" = xyes
+then :
+  printf "%s\n" "#define HAVE_STDLIB_H 1" >>confdefs.h
+
+fi
+ac_fn_cxx_check_header_compile "$LINENO" "string.h" "ac_cv_header_string_h" "$ac_includes_default"
+if test "x$ac_cv_header_string_h" = xyes
+then :
+  printf "%s\n" "#define HAVE_STRING_H 1" >>confdefs.h
+
+fi
+
+
+# Check for yaggo
+
+if test "x$YAGGO" = "x"
+then :
+  # Extract the first word of "yaggo", so it can be a program name with args.
+set dummy yaggo; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_path_YAGGO+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  case $YAGGO in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_YAGGO="$YAGGO" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_path_YAGGO="$as_dir$ac_word$ac_exec_ext"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_YAGGO" && ac_cv_path_YAGGO="false"
+  ;;
+esac
+fi
+YAGGO=$ac_cv_path_YAGGO
+if test -n "$YAGGO"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $YAGGO" >&5
+printf "%s\n" "$YAGGO" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+
+# Get jellyfish compile flags && executable
+
+
+
+
+
+
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_path_PKG_CONFIG+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  case $PKG_CONFIG in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_path_PKG_CONFIG="$as_dir$ac_word$ac_exec_ext"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+PKG_CONFIG=$ac_cv_path_PKG_CONFIG
+if test -n "$PKG_CONFIG"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
+printf "%s\n" "$PKG_CONFIG" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_PKG_CONFIG"; then
+  ac_pt_PKG_CONFIG=$PKG_CONFIG
+  # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_path_ac_pt_PKG_CONFIG+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  case $ac_pt_PKG_CONFIG in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_path_ac_pt_PKG_CONFIG="$as_dir$ac_word$ac_exec_ext"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
+if test -n "$ac_pt_PKG_CONFIG"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
+printf "%s\n" "$ac_pt_PKG_CONFIG" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_pt_PKG_CONFIG" = x; then
+    PKG_CONFIG=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    PKG_CONFIG=$ac_pt_PKG_CONFIG
+  fi
+else
+  PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+fi
+
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=0.9.0
+	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
+printf %s "checking pkg-config is at least version $_pkg_min_version... " >&6; }
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+printf "%s\n" "yes" >&6; }
+	else
+		{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+		PKG_CONFIG=""
+	fi
+fi
+
+pkg_failed=no
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for jellyfish-2.0" >&5
+printf %s "checking for jellyfish-2.0... " >&6; }
+
+if test -n "$JELLYFISH2_0_CFLAGS"; then
+    pkg_cv_JELLYFISH2_0_CFLAGS="$JELLYFISH2_0_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"jellyfish-2.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "jellyfish-2.0") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_JELLYFISH2_0_CFLAGS=`$PKG_CONFIG --cflags "jellyfish-2.0" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+if test -n "$JELLYFISH2_0_LIBS"; then
+    pkg_cv_JELLYFISH2_0_LIBS="$JELLYFISH2_0_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"jellyfish-2.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "jellyfish-2.0") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_JELLYFISH2_0_LIBS=`$PKG_CONFIG --libs "jellyfish-2.0" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi
+        if test $_pkg_short_errors_supported = yes; then
+                JELLYFISH2_0_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "jellyfish-2.0" 2>&1`
+        else
+                JELLYFISH2_0_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "jellyfish-2.0" 2>&1`
+        fi
+        # Put the nasty error message in config.log where it belongs
+        echo "$JELLYFISH2_0_PKG_ERRORS" >&5
+
+        as_fn_error $? "Package requirements (jellyfish-2.0) were not met:
+
+$JELLYFISH2_0_PKG_ERRORS
+
+Consider adjusting the PKG_CONFIG_PATH environment variable if you
+installed software in a non-standard prefix.
+
+Alternatively, you may set the environment variables JELLYFISH2_0_CFLAGS
+and JELLYFISH2_0_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details." "$LINENO" 5
+elif test $pkg_failed = untried; then
+        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+        { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "The pkg-config script could not be found or is too old.  Make sure it
+is in your PATH or set the PKG_CONFIG environment variable to the full
+path to pkg-config.
+
+Alternatively, you may set the environment variables JELLYFISH2_0_CFLAGS
+and JELLYFISH2_0_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.
+
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.
+See \`config.log' for more details" "$LINENO" 5; }
+else
+        JELLYFISH2_0_CFLAGS=$pkg_cv_JELLYFISH2_0_CFLAGS
+        JELLYFISH2_0_LIBS=$pkg_cv_JELLYFISH2_0_LIBS
+        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+printf "%s\n" "yes" >&6; }
+
+fi
+JELLYFISH_VERSION=$(pkg-config --modversion jellyfish-2.0)
+
+
+if test "x$JELLYFISH" = "x"
+then :
+  # Extract the first word of "jellyfish", so it can be a program name with args.
+set dummy jellyfish; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_path_JELLYFISH+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  case $JELLYFISH in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_JELLYFISH="$JELLYFISH" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_path_JELLYFISH="$as_dir$ac_word$ac_exec_ext"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_JELLYFISH" && ac_cv_path_JELLYFISH="false"
+  ;;
+esac
+fi
+JELLYFISH=$ac_cv_path_JELLYFISH
+if test -n "$JELLYFISH"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $JELLYFISH" >&5
+printf "%s\n" "$JELLYFISH" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+
+
+
+# --enable-all-static
+# Check whether --enable-all-static was given.
+if test ${enable_all_static+y}
+then :
+  enableval=$enable_all_static;
+fi
+
+STATIC_FLAGS=
+if test "x$enable_all_static" = xyes
+then :
+  STATIC_FLAGS=-all-static
+
+fi
+
+# --enable-relative-paths
+# Check whether --enable-relative-paths was given.
+if test ${enable_relative_paths+y}
+then :
+  enableval=$enable_relative_paths;
+fi
+
+ if test x$enable_relative_paths = xyes; then
+  RELATIVE_PATHS_TRUE=
+  RELATIVE_PATHS_FALSE='#'
+else
+  RELATIVE_PATHS_TRUE='#'
+  RELATIVE_PATHS_FALSE=
+fi
+
+
+# --with-relative-jf-path
+
+# Check whether --with-relative-jf-path was given.
+if test ${with_relative_jf_path+y}
+then :
+  withval=$with_relative_jf_path; case "$withval" in (yes) with_relative_jf_path="jellyfish" ;; (no) with_relative_jf_path= ;; (*) with_relative_jf_path=$withval/jellyfish ;; esac
+else $as_nop
+  with_relative_jf_path=
+fi
+
+RELATIVE_JF_PATH=$with_relative_jf_path
+
+ if test x$with_relative_jf_path != x; then
+  HAVE_RELATIVE_JF_PATH_TRUE=
+  HAVE_RELATIVE_JF_PATH_FALSE='#'
+else
+  HAVE_RELATIVE_JF_PATH_TRUE='#'
+  HAVE_RELATIVE_JF_PATH_FALSE=
+fi
+
+
+ac_fn_cxx_check_type "$LINENO" "__int128" "ac_cv_type___int128" "$ac_includes_default"
+if test "x$ac_cv_type___int128" = xyes
+then :
+
+printf "%s\n" "#define HAVE_INT128 1" >>confdefs.h
+
+fi
+
+# Check that type __int128 is supported and if the
+# std::numeric_limits<__int128> specialization exists
+
+# Check whether --with-int128 was given.
+if test ${with_int128+y}
+then :
+  withval=$with_int128;
+else $as_nop
+  with_int128=yes
+fi
+
+if test "x$with_int128" != xno
+then :
+  ac_fn_cxx_check_type "$LINENO" "__int128" "ac_cv_type___int128" "$ac_includes_default"
+if test "x$ac_cv_type___int128" = xyes
+then :
+
+printf "%s\n" "#define HAVE_INT128 1" >>confdefs.h
+
+fi
+
+       { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for std::numeric_limits<__int128>" >&5
+printf %s "checking for std::numeric_limits<__int128>... " >&6; }
+       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <limits>
+                                            template<bool> struct StaticAssert; template<> struct StaticAssert<true> { static void assert() { } };
+int
+main (void)
+{
+StaticAssert<std::numeric_limits<__int128>::is_specialized>::assert();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"
+then :
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+printf "%s\n" "yes" >&6; }
+
+printf "%s\n" "#define HAVE_NUMERIC_LIMITS128 1" >>confdefs.h
+
+else $as_nop
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+
+# Check the version of strerror_r
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $CXX options needed to detect all undeclared functions" >&5
+printf %s "checking for $CXX options needed to detect all undeclared functions... " >&6; }
+if test ${ac_cv_cxx_undeclared_builtin_options+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_save_CFLAGS=$CFLAGS
+   ac_cv_cxx_undeclared_builtin_options='cannot detect'
+   for ac_arg in '' -fno-builtin; do
+     CFLAGS="$ac_save_CFLAGS $ac_arg"
+     # This test program should *not* compile successfully.
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main (void)
+{
+(void) strchr;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"
+then :
+
+else $as_nop
+  # This test program should compile successfully.
+        # No library function is consistently available on
+        # freestanding implementations, so test against a dummy
+        # declaration.  Include always-available headers on the
+        # off chance that they somehow elicit warnings.
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <float.h>
+#include <limits.h>
+#include <stdarg.h>
+#include <stddef.h>
+extern void ac_decl (int, char *);
+
+int
+main (void)
+{
+(void) ac_decl (0, (char *) 0);
+  (void) ac_decl;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"
+then :
+  if test x"$ac_arg" = x
+then :
+  ac_cv_cxx_undeclared_builtin_options='none needed'
+else $as_nop
+  ac_cv_cxx_undeclared_builtin_options=$ac_arg
+fi
+          break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+    done
+    CFLAGS=$ac_save_CFLAGS
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_undeclared_builtin_options" >&5
+printf "%s\n" "$ac_cv_cxx_undeclared_builtin_options" >&6; }
+  case $ac_cv_cxx_undeclared_builtin_options in #(
+  'cannot detect') :
+    { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot make $CXX report undeclared builtins
+See \`config.log' for more details" "$LINENO" 5; } ;; #(
+  'none needed') :
+    ac_cxx_undeclared_builtin_options='' ;; #(
+  *) :
+    ac_cxx_undeclared_builtin_options=$ac_cv_cxx_undeclared_builtin_options ;;
+esac
+
+ac_fn_check_decl "$LINENO" "strerror_r" "ac_cv_have_decl_strerror_r" "$ac_includes_default" "$ac_cxx_undeclared_builtin_options" "CXXFLAGS"
+if test "x$ac_cv_have_decl_strerror_r" = xyes
+then :
+  ac_have_decl=1
+else $as_nop
+  ac_have_decl=0
+fi
+printf "%s\n" "#define HAVE_DECL_STRERROR_R $ac_have_decl" >>confdefs.h
+
+
+if test $ac_cv_have_decl_strerror_r = yes; then
+  # For backward compatibility's sake, define HAVE_STRERROR_R.
+  # (We used to run AC_CHECK_FUNCS_ONCE for strerror_r, as well
+  # as AC_CHECK_DECLS_ONCE.)
+
+printf "%s\n" "#define HAVE_STRERROR_R 1" >>confdefs.h
+
+fi
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether strerror_r returns char *" >&5
+printf %s "checking whether strerror_r returns char *... " >&6; }
+if test ${ac_cv_func_strerror_r_char_p+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+
+    ac_cv_func_strerror_r_char_p=no
+    if test $ac_cv_have_decl_strerror_r = yes; then
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+int
+main (void)
+{
+
+	  char buf[100];
+	  char x = *strerror_r (0, buf, sizeof buf);
+	  char *p = strerror_r (0, buf, sizeof buf);
+	  return !p || x;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"
+then :
+  ac_cv_func_strerror_r_char_p=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+
+    fi
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strerror_r_char_p" >&5
+printf "%s\n" "$ac_cv_func_strerror_r_char_p" >&6; }
+if test $ac_cv_func_strerror_r_char_p = yes; then
+
+printf "%s\n" "#define STRERROR_R_CHAR_P 1" >>confdefs.h
+
+fi
+
+
+# Checks for typedefs, structures, and compiler characteristics.
+ac_fn_cxx_check_type "$LINENO" "_Bool" "ac_cv_type__Bool" "$ac_includes_default"
+if test "x$ac_cv_type__Bool" = xyes
+then :
+
+printf "%s\n" "#define HAVE__BOOL 1" >>confdefs.h
+
+
+fi
+
+   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for stdbool.h that conforms to C99" >&5
+printf %s "checking for stdbool.h that conforms to C99... " >&6; }
+if test ${ac_cv_header_stdbool_h+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdbool.h>
+
+             #ifndef __bool_true_false_are_defined
+               #error "__bool_true_false_are_defined is not defined"
+             #endif
+             char a[__bool_true_false_are_defined == 1 ? 1 : -1];
+
+             /* Regardless of whether this is C++ or "_Bool" is a
+                valid type name, "true" and "false" should be usable
+                in #if expressions and integer constant expressions,
+                and "bool" should be a valid type name.  */
+
+             #if !true
+               #error "'true' is not true"
+             #endif
+             #if true != 1
+               #error "'true' is not equal to 1"
+             #endif
+             char b[true == 1 ? 1 : -1];
+             char c[true];
+
+             #if false
+               #error "'false' is not false"
+             #endif
+             #if false != 0
+               #error "'false' is not equal to 0"
+             #endif
+             char d[false == 0 ? 1 : -1];
+
+             enum { e = false, f = true, g = false * true, h = true * 256 };
+
+             char i[(bool) 0.5 == true ? 1 : -1];
+             char j[(bool) 0.0 == false ? 1 : -1];
+             char k[sizeof (bool) > 0 ? 1 : -1];
+
+             struct sb { bool s: 1; bool t; } s;
+             char l[sizeof s.t > 0 ? 1 : -1];
+
+             /* The following fails for
+                HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003]. */
+             bool m[h];
+             char n[sizeof m == h * sizeof m[0] ? 1 : -1];
+             char o[-1 - (bool) 0 < 0 ? 1 : -1];
+             /* Catch a bug in an HP-UX C compiler.  See
+         https://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html
+         https://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html
+              */
+             bool p = true;
+             bool *pp = &p;
+
+             /* C 1999 specifies that bool, true, and false are to be
+                macros, but C++ 2011 and later overrule this.  */
+             #if __cplusplus < 201103
+              #ifndef bool
+               #error "bool is not defined"
+              #endif
+              #ifndef false
+               #error "false is not defined"
+              #endif
+              #ifndef true
+               #error "true is not defined"
+              #endif
+             #endif
+
+             /* If _Bool is available, repeat with it all the tests
+                above that used bool.  */
+             #ifdef HAVE__BOOL
+               struct sB { _Bool s: 1; _Bool t; } t;
+
+               char q[(_Bool) 0.5 == true ? 1 : -1];
+               char r[(_Bool) 0.0 == false ? 1 : -1];
+               char u[sizeof (_Bool) > 0 ? 1 : -1];
+               char v[sizeof t.t > 0 ? 1 : -1];
+
+               _Bool w[h];
+               char x[sizeof m == h * sizeof m[0] ? 1 : -1];
+               char y[-1 - (_Bool) 0 < 0 ? 1 : -1];
+               _Bool z = true;
+               _Bool *pz = &p;
+             #endif
+
+int
+main (void)
+{
+
+             bool ps = &s;
+             *pp |= p;
+             *pp |= ! p;
+
+             #ifdef HAVE__BOOL
+               _Bool pt = &t;
+               *pz |= z;
+               *pz |= ! z;
+             #endif
+
+             /* Refer to every declared value, so they cannot be
+                discarded as unused.  */
+             return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !j + !k
+                     + !l + !m + !n + !o + !p + !pp + !ps
+             #ifdef HAVE__BOOL
+                     + !q + !r + !u + !v + !w + !x + !y + !z + !pt
+             #endif
+                    );
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"
+then :
+  ac_cv_header_stdbool_h=yes
+else $as_nop
+  ac_cv_header_stdbool_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdbool_h" >&5
+printf "%s\n" "$ac_cv_header_stdbool_h" >&6; }
+
+if test $ac_cv_header_stdbool_h = yes; then
+
+printf "%s\n" "#define HAVE_STDBOOL_H 1" >>confdefs.h
+
+fi
+
+ac_fn_cxx_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = xyes
+then :
+
+else $as_nop
+
+printf "%s\n" "#define size_t unsigned int" >>confdefs.h
+
+fi
+
+ac_fn_cxx_check_type "$LINENO" "ssize_t" "ac_cv_type_ssize_t" "$ac_includes_default"
+if test "x$ac_cv_type_ssize_t" = xyes
+then :
+
+else $as_nop
+
+printf "%s\n" "#define ssize_t int" >>confdefs.h
+
+fi
+
+ac_fn_cxx_check_type "$LINENO" "ptrdiff_t" "ac_cv_type_ptrdiff_t" "$ac_includes_default"
+if test "x$ac_cv_type_ptrdiff_t" = xyes
+then :
+
+printf "%s\n" "#define HAVE_PTRDIFF_T 1" >>confdefs.h
+
+
+fi
+
+
+# Checks for library functions.
+
+
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+printf "%s\n" "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test ${\1+y} || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+printf "%s\n" "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+printf "%s\n" "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`printf "%s\n" "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+printf %s "checking that generated files are newer than configure... " >&6; }
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: done" >&5
+printf "%s\n" "done" >&6; }
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${RELATIVE_PATHS_TRUE}" && test -z "${RELATIVE_PATHS_FALSE}"; then
+  as_fn_error $? "conditional \"RELATIVE_PATHS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_RELATIVE_JF_PATH_TRUE}" && test -z "${HAVE_RELATIVE_JF_PATH_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_RELATIVE_JF_PATH\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+printf "%s\n" "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+as_nop=:
+if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else $as_nop
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+
+# Reset variables that may have inherited troublesome values from
+# the environment.
+
+# IFS needs to be set, to space, tab, and newline, in precisely that order.
+# (If _AS_PATH_WALK were called with IFS unset, it would have the
+# side effect of setting IFS to empty, thus disabling word splitting.)
+# Quoting is to prevent editors from complaining about space-tab.
+as_nl='
+'
+export as_nl
+IFS=" ""	$as_nl"
+
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# Ensure predictable behavior from utilities with locale-dependent output.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# We cannot yet rely on "unset" to work, but we need these variables
+# to be unset--not just set to an empty or harmless value--now, to
+# avoid bugs in old shells (e.g. pre-3.0 UWIN ksh).  This construct
+# also avoids known problems related to "unset" and subshell syntax
+# in other old shells (e.g. bash 2.01 and pdksh 5.2.14).
+for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH
+do eval test \${$as_var+y} \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+
+# Ensure that fds 0, 1, and 2 are open.
+if (exec 3>&0) 2>/dev/null; then :; else exec 0</dev/null; fi
+if (exec 3>&1) 2>/dev/null; then :; else exec 1>/dev/null; fi
+if (exec 3>&2)            ; then :; else exec 2>/dev/null; fi
+
+# The user is always right.
+if ${PATH_SEPARATOR+false} :; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    test -r "$as_dir$0" && as_myself=$as_dir$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  printf "%s\n" "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null
+then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else $as_nop
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null
+then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else $as_nop
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+# Determine whether it's possible to make 'echo' print without a newline.
+# These variables are no longer used directly by Autoconf, but are AC_SUBSTed
+# for compatibility with existing Makefiles.
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+# For backward compatibility with old third-party macros, we provide
+# the shell variables $as_echo and $as_echo_n.  New code should use
+# AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively.
+as_echo='printf %s\n'
+as_echo_n='printf %s'
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by quorum $as_me 1.1.2, which was
+generated by GNU Autoconf 2.71.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <gmarcais@cs.cmu.edu>."
+
+_ACEOF
+ac_cs_config=`printf "%s\n" "$ac_configure_args" | sed "$ac_safe_unquote"`
+ac_cs_config_escaped=`printf "%s\n" "$ac_cs_config" | sed "s/^ //; s/'/'\\\\\\\\''/g"`
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config='$ac_cs_config_escaped'
+ac_cs_version="\\
+quorum config.status 1.1.2
+configured by $0, generated by GNU Autoconf 2.71,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2021 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    printf "%s\n" "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    printf "%s\n" "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`printf "%s\n" "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`printf "%s\n" "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    printf "%s\n" "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \printf "%s\n" "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  printf "%s\n" "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+FILECMD='`$ECHO "$FILECMD" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+lt_ar_flags='`$ECHO "$lt_ar_flags" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`'
+predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`'
+postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`'
+predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`'
+postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`'
+LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`'
+reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`'
+reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`'
+GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`'
+predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`'
+postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+FILECMD \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+lt_cv_nm_interface \
+nm_file_list_spec \
+lt_cv_truncate_bin \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib \
+compiler_lib_search_dirs \
+predep_objects \
+postdep_objects \
+predeps \
+postdeps \
+compiler_lib_search_path \
+LD_CXX \
+reload_flag_CXX \
+compiler_CXX \
+lt_prog_compiler_no_builtin_flag_CXX \
+lt_prog_compiler_pic_CXX \
+lt_prog_compiler_wl_CXX \
+lt_prog_compiler_static_CXX \
+lt_cv_prog_compiler_c_o_CXX \
+export_dynamic_flag_spec_CXX \
+whole_archive_flag_spec_CXX \
+compiler_needs_object_CXX \
+with_gnu_ld_CXX \
+allow_undefined_flag_CXX \
+no_undefined_flag_CXX \
+hardcode_libdir_flag_spec_CXX \
+hardcode_libdir_separator_CXX \
+exclude_expsyms_CXX \
+include_expsyms_CXX \
+file_list_spec_CXX \
+compiler_lib_search_dirs_CXX \
+predep_objects_CXX \
+postdep_objects_CXX \
+predeps_CXX \
+postdeps_CXX \
+compiler_lib_search_path_CXX; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path \
+reload_cmds_CXX \
+old_archive_cmds_CXX \
+old_archive_from_new_cmds_CXX \
+old_archive_from_expsyms_cmds_CXX \
+archive_cmds_CXX \
+archive_expsym_cmds_CXX \
+module_cmds_CXX \
+module_expsym_cmds_CXX \
+export_symbols_cmds_CXX \
+prelink_cmds_CXX \
+postlink_cmds_CXX; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+
+# See if we are running on zsh, and set the options that allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}"; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test ${CONFIG_FILES+y} || CONFIG_FILES=$config_files
+  test ${CONFIG_HEADERS+y} || CONFIG_HEADERS=$config_headers
+  test ${CONFIG_COMMANDS+y} || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`printf "%s\n" "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  printf "%s\n" "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+printf "%s\n" "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`printf "%s\n" "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+printf "%s\n" "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+printf "%s\n" "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+  if test x"$ac_file" != x-; then
+    {
+      printf "%s\n" "/* $configure_input  */" >&1 \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+printf "%s\n" "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f "$ac_file"
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    fi
+  else
+    printf "%s\n" "/* $configure_input  */" >&1 \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
+  fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+  :C)  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+printf "%s\n" "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Older Autoconf quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  # TODO: see whether this extra hack can be removed once we start
+  # requiring Autoconf 2.70 or later.
+  case $CONFIG_FILES in #(
+  *\'*) :
+    eval set x "$CONFIG_FILES" ;; #(
+  *) :
+    set x $CONFIG_FILES ;; #(
+  *) :
+     ;;
+esac
+  shift
+  # Used to flag and report bootstrapping failures.
+  am_rc=0
+  for am_mf
+  do
+    # Strip MF so we end up with the name of the file.
+    am_mf=`printf "%s\n" "$am_mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile which includes
+    # dependency-tracking related rules and includes.
+    # Grep'ing the whole file directly is not great: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
+      || continue
+    am_dirpart=`$as_dirname -- "$am_mf" ||
+$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$am_mf" : 'X\(//\)[^/]' \| \
+	 X"$am_mf" : 'X\(//\)$' \| \
+	 X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$am_mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    am_filepart=`$as_basename -- "$am_mf" ||
+$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$am_mf" : 'X\(//\)$' \| \
+	 X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X/"$am_mf" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    { echo "$as_me:$LINENO: cd "$am_dirpart" \
+      && sed -e '/# am--include-marker/d' "$am_filepart" \
+        | $MAKE -f - am--depfiles" >&5
+   (cd "$am_dirpart" \
+      && sed -e '/# am--include-marker/d' "$am_filepart" \
+        | $MAKE -f - am--depfiles) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } || am_rc=$?
+  done
+  if test $am_rc -ne 0; then
+    { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "Something went wrong bootstrapping makefile fragments
+    for automatic dependency tracking.  If GNU make was not used, consider
+    re-running the configure script with MAKE=\"gmake\" (or whatever is
+    necessary).  You can also try re-running configure with the
+    '--disable-dependency-tracking' option to at least be able to build
+    the package (albeit without support for automatic dependency tracking).
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+  { am_dirpart=; unset am_dirpart;}
+  { am_filepart=; unset am_filepart;}
+  { am_mf=; unset am_mf;}
+  { am_rc=; unset am_rc;}
+  rm -f conftest-deps.mk
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options that allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}"; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile=${ofile}T
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+# Generated automatically by $as_me ($PACKAGE) $VERSION
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the  same
+# distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags='CXX '
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# A file(cmd) program that detects file types.
+FILECMD=$lt_FILECMD
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive (by configure).
+lt_ar_flags=$lt_ar_flags
+
+# Flags to create an archive.
+AR_FLAGS=\${ARFLAGS-"\$lt_ar_flags"}
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and where our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects
+postdep_objects=$lt_postdep_objects
+predeps=$lt_predeps
+postdeps=$lt_postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+    cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+        distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test set != "${COLLECT_NAMES+set}"; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+
+ltmain=$ac_aux_dir/ltmain.sh
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  $SED '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+
+    cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: CXX
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_CXX
+reload_cmds=$lt_reload_cmds_CXX
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_CXX
+
+# A language specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_CXX
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_CXX
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_CXX
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_CXX
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_CXX
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_CXX
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_CXX
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_CXX
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_CXX
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_CXX
+postdep_objects=$lt_postdep_objects_CXX
+predeps=$lt_predeps_CXX
+postdeps=$lt_postdeps_CXX
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+
+# ### END LIBTOOL TAG CONFIG: CXX
+_LT_EOF
+
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
+
diff --git a/configure.ac b/configure.ac
index 20f13e4..f5df183 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,4 +1,4 @@
-AC_INIT([quorum], [1.1.1], [gmarcais@cs.cmu.edu])
+AC_INIT([quorum], [1.1.2], [gmarcais@cs.cmu.edu])
 AC_CONFIG_AUX_DIR([build-aux])
 AC_CONFIG_SRCDIR([src/error_correct_reads.hpp])
 AC_CONFIG_HEADERS([config.h])
@@ -55,6 +55,21 @@ AM_CONDITIONAL([HAVE_RELATIVE_JF_PATH], [test x$with_relative_jf_path != x])
 
 AC_CHECK_TYPE([__int128],
               [AC_DEFINE([HAVE_INT128], [1], [Define if type __int128 is supported])])
+# Check that type __int128 is supported and if the
+# std::numeric_limits<__int128> specialization exists
+AC_ARG_WITH([int128],
+            [AS_HELP_STRING([--with-int128], [enable int128])],
+            [], [with_int128=yes])
+AS_IF([test "x$with_int128" != xno],
+      [AC_CHECK_TYPE([__int128],
+                     [AC_DEFINE([HAVE_INT128], [1], [Define if type __int128 is supported])])
+       AC_MSG_CHECKING([for std::numeric_limits<__int128>])
+       AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <limits>
+                                            template<bool> struct StaticAssert; template<> struct StaticAssert<true> { static void assert() { } };]],
+                                          [[StaticAssert<std::numeric_limits<__int128>::is_specialized>::assert();]])],
+                         [AC_MSG_RESULT([yes])]
+                         [AC_DEFINE([HAVE_NUMERIC_LIMITS128], [1], [Define if numeric limits specialization exists for __int128])],
+                         [AC_MSG_RESULT([no])])])
 
 
 # Check the version of strerror_r
diff --git a/data/adapter.fa b/data/adapter.fa
deleted file mode 100644
index 15dcfac..0000000
--- a/data/adapter.fa
+++ /dev/null
@@ -1,1756 +0,0 @@
->1
-GATCGGAAGAGCTCGTATGCCGTCTTCTGCTTG
->2
-ACACTCTTTCCCTACACGACGCTCTTCCGATCT
->3
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->4
-CAAGCAGAAGACGGCATACGAGCTCTTCCGATCT
->5
-GATCGGAAGAGCGGTTCAGCAGGAATGCCGAG
->6
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->7
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->0
-AAACTCTTTCCCTACACGACGCTCTTCCGATCT
->1
-AAAGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->2
-AAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->3
-AAAGCAGAAGACGGCATACGAGCTCTTCCGATCT
->4
-AACGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->5
-AAGGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->6
-AATAATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->7
-AATCATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->8
-AATCGGAAGAGCGGTTCAGCAGGAATGCCGAG
->9
-AATCGGAAGAGCTCGTATGCCGTCTTCTGCTTG
->10
-AATGAAACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->11
-AATGACACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->12
-AATGAGACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->13
-AATGATAAGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->14
-AATGATACAGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->15
-AATGATACCGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->16
-AATGATACGACGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->17
-AATGATACGCCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->18
-AATGATACGGAGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->19
-AATGATACGGCAACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->20
-AATGATACGGCCACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->21
-AATGATACGGCGAACACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->22
-AATGATACGGCGACAACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->23
-AATGATACGGCGACCAACGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->24
-AATGATACGGCGACCACAGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->25
-AATGATACGGCGACCACCAAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->26
-AATGATACGGCGACCACCCAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->27
-AATGATACGGCGACCACCGAAATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->28
-AATGATACGGCGACCACCGACATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->29
-AATGATACGGCGACCACCGAGAACTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->30
-AATGATACGGCGACCACCGAGACCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->31
-AATGATACGGCGACCACCGAGAGCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->32
-AATGATACGGCGACCACCGAGATATACACTCTTTCCCTACACGACGCTCTTCCGATCT
->33
-AATGATACGGCGACCACCGAGATCAACACTCTTTCCCTACACGACGCTCTTCCGATCT
->34
-AATGATACGGCGACCACCGAGATCCACACTCTTTCCCTACACGACGCTCTTCCGATCT
->35
-AATGATACGGCGACCACCGAGATCGACACTCTTTCCCTACACGACGCTCTTCCGATCT
->36
-AATGATACGGCGACCACCGAGATCTAAACTCTTTCCCTACACGACGCTCTTCCGATCT
->37
-AATGATACGGCGACCACCGAGATCTACAATCTTTCCCTACACGACGCTCTTCCGATCT
->38
-AATGATACGGCGACCACCGAGATCTACACACTTTCCCTACACGACGCTCTTCCGATCT
->39
-AATGATACGGCGACCACCGAGATCTACACCCTTTCCCTACACGACGCTCTTCCGATCT
->40
-AATGATACGGCGACCACCGAGATCTACACGCTTTCCCTACACGACGCTCTTCCGATCT
->41
-AATGATACGGCGACCACCGAGATCTACACTATTTCCCTACACGACGCTCTTCCGATCT
->42
-AATGATACGGCGACCACCGAGATCTACACTCATTCCCTACACGACGCTCTTCCGATCT
->43
-AATGATACGGCGACCACCGAGATCTACACTCCTTCCCTACACGACGCTCTTCCGATCT
->44
-AATGATACGGCGACCACCGAGATCTACACTCGTTCCCTACACGACGCTCTTCCGATCT
->45
-AATGATACGGCGACCACCGAGATCTACACTCTATCCCTACACGACGCTCTTCCGATCT
->46
-AATGATACGGCGACCACCGAGATCTACACTCTCTCCCTACACGACGCTCTTCCGATCT
->47
-AATGATACGGCGACCACCGAGATCTACACTCTGTCCCTACACGACGCTCTTCCGATCT
->48
-AATGATACGGCGACCACCGAGATCTACACTCTTACCCTACACGACGCTCTTCCGATCT
->49
-AATGATACGGCGACCACCGAGATCTACACTCTTCCCCTACACGACGCTCTTCCGATCT
->50
-AATGATACGGCGACCACCGAGATCTACACTCTTGCCCTACACGACGCTCTTCCGATCT
->51
-AATGATACGGCGACCACCGAGATCTACACTCTTTACCTACACGACGCTCTTCCGATCT
->52
-AATGATACGGCGACCACCGAGATCTACACTCTTTCACTACACGACGCTCTTCCGATCT
->53
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCATACACGACGCTCTTCCGATCT
->54
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCAACACGACGCTCTTCCGATCT
->55
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCCACACGACGCTCTTCCGATCT
->56
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCGACACGACGCTCTTCCGATCT
->57
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTAAACGACGCTCTTCCGATCT
->58
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACAAGACGCTCTTCCGATCT
->59
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACAACGCTCTTCCGATCT
->60
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACCACGCTCTTCCGATCT
->61
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGAAGCTCTTCCGATCT
->62
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACACTCTTCCGATCT
->63
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACCCTCTTCCGATCT
->64
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGATCTTCCGATCT
->65
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCACTTCCGATCT
->66
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCCCTTCCGATCT
->67
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCGCTTCCGATCT
->68
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTATTCCGATCT
->69
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCATCCGATCT
->70
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCCTCCGATCT
->71
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCGTCCGATCT
->72
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTACCGATCT
->73
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTCCCGATCT
->74
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTGCCGATCT
->75
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTACGATCT
->76
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCAGATCT
->77
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCAATCT
->78
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCCATCT
->79
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGAACT
->80
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGACCT
->81
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGAGCT
->82
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATAT
->83
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCA
->84
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCC
->85
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCG
->86
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->87
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATGT
->88
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATTT
->89
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGCTCT
->90
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGGTCT
->91
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGTTCT
->92
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCTATCT
->93
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCGGATCT
->94
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCTGATCT
->95
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTGCGATCT
->96
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTTCGATCT
->97
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTGTTCCGATCT
->98
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTTTTCCGATCT
->99
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGGTCTTCCGATCT
->100
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGTTCTTCCGATCT
->101
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACTCTCTTCCGATCT
->102
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGAGGCTCTTCCGATCT
->103
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGATGCTCTTCCGATCT
->104
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGCCGCTCTTCCGATCT
->105
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGGCGCTCTTCCGATCT
->106
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGTCGCTCTTCCGATCT
->107
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACTACGCTCTTCCGATCT
->108
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACAGGACGCTCTTCCGATCT
->109
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACATGACGCTCTTCCGATCT
->110
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACCCGACGCTCTTCCGATCT
->111
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACGCGACGCTCTTCCGATCT
->112
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACTCGACGCTCTTCCGATCT
->113
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTAGACGACGCTCTTCCGATCT
->114
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTATACGACGCTCTTCCGATCT
->115
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTCCACGACGCTCTTCCGATCT
->116
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTGCACGACGCTCTTCCGATCT
->117
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTTCACGACGCTCTTCCGATCT
->118
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCGTACACGACGCTCTTCCGATCT
->119
-AATGATACGGCGACCACCGAGATCTACACTCTTTCCTTACACGACGCTCTTCCGATCT
->120
-AATGATACGGCGACCACCGAGATCTACACTCTTTCGCTACACGACGCTCTTCCGATCT
->121
-AATGATACGGCGACCACCGAGATCTACACTCTTTCTCTACACGACGCTCTTCCGATCT
->122
-AATGATACGGCGACCACCGAGATCTACACTCTTTGCCTACACGACGCTCTTCCGATCT
->123
-AATGATACGGCGACCACCGAGATCTACACTCTTTTCCTACACGACGCTCTTCCGATCT
->124
-AATGATACGGCGACCACCGAGATCTACACTGTTTCCCTACACGACGCTCTTCCGATCT
->125
-AATGATACGGCGACCACCGAGATCTACACTTTTTCCCTACACGACGCTCTTCCGATCT
->126
-AATGATACGGCGACCACCGAGATCTACAGTCTTTCCCTACACGACGCTCTTCCGATCT
->127
-AATGATACGGCGACCACCGAGATCTACATTCTTTCCCTACACGACGCTCTTCCGATCT
->128
-AATGATACGGCGACCACCGAGATCTACCCTCTTTCCCTACACGACGCTCTTCCGATCT
->129
-AATGATACGGCGACCACCGAGATCTACGCTCTTTCCCTACACGACGCTCTTCCGATCT
->130
-AATGATACGGCGACCACCGAGATCTACTCTCTTTCCCTACACGACGCTCTTCCGATCT
->131
-AATGATACGGCGACCACCGAGATCTAGACTCTTTCCCTACACGACGCTCTTCCGATCT
->132
-AATGATACGGCGACCACCGAGATCTATACTCTTTCCCTACACGACGCTCTTCCGATCT
->133
-AATGATACGGCGACCACCGAGATCTCCACTCTTTCCCTACACGACGCTCTTCCGATCT
->134
-AATGATACGGCGACCACCGAGATCTGCACTCTTTCCCTACACGACGCTCTTCCGATCT
->135
-AATGATACGGCGACCACCGAGATCTTCACTCTTTCCCTACACGACGCTCTTCCGATCT
->136
-AATGATACGGCGACCACCGAGATGTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->137
-AATGATACGGCGACCACCGAGATTTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->138
-AATGATACGGCGACCACCGAGCTCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->139
-AATGATACGGCGACCACCGAGGTCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->140
-AATGATACGGCGACCACCGAGTTCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->141
-AATGATACGGCGACCACCGATATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->142
-AATGATACGGCGACCACCGCGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->143
-AATGATACGGCGACCACCGGGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->144
-AATGATACGGCGACCACCGTGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->145
-AATGATACGGCGACCACCTAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->146
-AATGATACGGCGACCACGGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->147
-AATGATACGGCGACCACTGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->148
-AATGATACGGCGACCAGCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->149
-AATGATACGGCGACCATCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->150
-AATGATACGGCGACCCCCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->151
-AATGATACGGCGACCGCCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->152
-AATGATACGGCGACCTCCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->153
-AATGATACGGCGACGACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->154
-AATGATACGGCGACTACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->155
-AATGATACGGCGAGCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->156
-AATGATACGGCGATCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->157
-AATGATACGGCGCCCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->158
-AATGATACGGCGGCCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->159
-AATGATACGGCGTCCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->160
-AATGATACGGCTACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->161
-AATGATACGGGGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->162
-AATGATACGGTGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->163
-AATGATACGTCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->164
-AATGATACTGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->165
-AATGATAGGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->166
-AATGATATGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->167
-AATGATCCGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->168
-AATGATGCGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->169
-AATGATTCGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->170
-AATGCTACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->171
-AATGGTACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->172
-AATGTTACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->173
-AATTATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->174
-ACAATCTTTCCCTACACGACGCTCTTCCGATCT
->175
-ACACACTTTCCCTACACGACGCTCTTCCGATCT
->176
-ACACCCTTTCCCTACACGACGCTCTTCCGATCT
->177
-ACACGCTTTCCCTACACGACGCTCTTCCGATCT
->178
-ACACTATTTCCCTACACGACGCTCTTCCGATCT
->179
-ACACTCATTCCCTACACGACGCTCTTCCGATCT
->180
-ACACTCCTTCCCTACACGACGCTCTTCCGATCT
->181
-ACACTCGTTCCCTACACGACGCTCTTCCGATCT
->182
-ACACTCTATCCCTACACGACGCTCTTCCGATCT
->183
-ACACTCTCTCCCTACACGACGCTCTTCCGATCT
->184
-ACACTCTGTCCCTACACGACGCTCTTCCGATCT
->185
-ACACTCTTACCCTACACGACGCTCTTCCGATCT
->186
-ACACTCTTCCCCTACACGACGCTCTTCCGATCT
->187
-ACACTCTTGCCCTACACGACGCTCTTCCGATCT
->188
-ACACTCTTTACCTACACGACGCTCTTCCGATCT
->189
-ACACTCTTTCACTACACGACGCTCTTCCGATCT
->190
-ACACTCTTTCCATACACGACGCTCTTCCGATCT
->191
-ACACTCTTTCCCAACACGACGCTCTTCCGATCT
->192
-ACACTCTTTCCCCACACGACGCTCTTCCGATCT
->193
-ACACTCTTTCCCGACACGACGCTCTTCCGATCT
->194
-ACACTCTTTCCCTAAACGACGCTCTTCCGATCT
->195
-ACACTCTTTCCCTACAAGACGCTCTTCCGATCT
->196
-ACACTCTTTCCCTACACAACGCTCTTCCGATCT
->197
-ACACTCTTTCCCTACACCACGCTCTTCCGATCT
->198
-ACACTCTTTCCCTACACGAAGCTCTTCCGATCT
->199
-ACACTCTTTCCCTACACGACACTCTTCCGATCT
->200
-ACACTCTTTCCCTACACGACCCTCTTCCGATCT
->201
-ACACTCTTTCCCTACACGACGATCTTCCGATCT
->202
-ACACTCTTTCCCTACACGACGCACTTCCGATCT
->203
-ACACTCTTTCCCTACACGACGCCCTTCCGATCT
->204
-ACACTCTTTCCCTACACGACGCGCTTCCGATCT
->205
-ACACTCTTTCCCTACACGACGCTATTCCGATCT
->206
-ACACTCTTTCCCTACACGACGCTCATCCGATCT
->207
-ACACTCTTTCCCTACACGACGCTCCTCCGATCT
->208
-ACACTCTTTCCCTACACGACGCTCGTCCGATCT
->209
-ACACTCTTTCCCTACACGACGCTCTACCGATCT
->210
-ACACTCTTTCCCTACACGACGCTCTCCCGATCT
->211
-ACACTCTTTCCCTACACGACGCTCTGCCGATCT
->212
-ACACTCTTTCCCTACACGACGCTCTTACGATCT
->213
-ACACTCTTTCCCTACACGACGCTCTTCAGATCT
->214
-ACACTCTTTCCCTACACGACGCTCTTCCAATCT
->215
-ACACTCTTTCCCTACACGACGCTCTTCCCATCT
->216
-ACACTCTTTCCCTACACGACGCTCTTCCGAACT
->217
-ACACTCTTTCCCTACACGACGCTCTTCCGACCT
->218
-ACACTCTTTCCCTACACGACGCTCTTCCGAGCT
->219
-ACACTCTTTCCCTACACGACGCTCTTCCGATAT
->220
-ACACTCTTTCCCTACACGACGCTCTTCCGATCA
->221
-ACACTCTTTCCCTACACGACGCTCTTCCGATCC
->222
-ACACTCTTTCCCTACACGACGCTCTTCCGATCG
->223
-ACACTCTTTCCCTACACGACGCTCTTCCGATCT
->224
-ACACTCTTTCCCTACACGACGCTCTTCCGATGT
->225
-ACACTCTTTCCCTACACGACGCTCTTCCGATTT
->226
-ACACTCTTTCCCTACACGACGCTCTTCCGCTCT
->227
-ACACTCTTTCCCTACACGACGCTCTTCCGGTCT
->228
-ACACTCTTTCCCTACACGACGCTCTTCCGTTCT
->229
-ACACTCTTTCCCTACACGACGCTCTTCCTATCT
->230
-ACACTCTTTCCCTACACGACGCTCTTCGGATCT
->231
-ACACTCTTTCCCTACACGACGCTCTTCTGATCT
->232
-ACACTCTTTCCCTACACGACGCTCTTGCGATCT
->233
-ACACTCTTTCCCTACACGACGCTCTTTCGATCT
->234
-ACACTCTTTCCCTACACGACGCTGTTCCGATCT
->235
-ACACTCTTTCCCTACACGACGCTTTTCCGATCT
->236
-ACACTCTTTCCCTACACGACGGTCTTCCGATCT
->237
-ACACTCTTTCCCTACACGACGTTCTTCCGATCT
->238
-ACACTCTTTCCCTACACGACTCTCTTCCGATCT
->239
-ACACTCTTTCCCTACACGAGGCTCTTCCGATCT
->240
-ACACTCTTTCCCTACACGATGCTCTTCCGATCT
->241
-ACACTCTTTCCCTACACGCCGCTCTTCCGATCT
->242
-ACACTCTTTCCCTACACGGCGCTCTTCCGATCT
->243
-ACACTCTTTCCCTACACGTCGCTCTTCCGATCT
->244
-ACACTCTTTCCCTACACTACGCTCTTCCGATCT
->245
-ACACTCTTTCCCTACAGGACGCTCTTCCGATCT
->246
-ACACTCTTTCCCTACATGACGCTCTTCCGATCT
->247
-ACACTCTTTCCCTACCCGACGCTCTTCCGATCT
->248
-ACACTCTTTCCCTACGCGACGCTCTTCCGATCT
->249
-ACACTCTTTCCCTACTCGACGCTCTTCCGATCT
->250
-ACACTCTTTCCCTAGACGACGCTCTTCCGATCT
->251
-ACACTCTTTCCCTATACGACGCTCTTCCGATCT
->252
-ACACTCTTTCCCTCCACGACGCTCTTCCGATCT
->253
-ACACTCTTTCCCTGCACGACGCTCTTCCGATCT
->254
-ACACTCTTTCCCTTCACGACGCTCTTCCGATCT
->255
-ACACTCTTTCCGTACACGACGCTCTTCCGATCT
->256
-ACACTCTTTCCTTACACGACGCTCTTCCGATCT
->257
-ACACTCTTTCGCTACACGACGCTCTTCCGATCT
->258
-ACACTCTTTCTCTACACGACGCTCTTCCGATCT
->259
-ACACTCTTTGCCTACACGACGCTCTTCCGATCT
->260
-ACACTCTTTTCCTACACGACGCTCTTCCGATCT
->261
-ACACTGTTTCCCTACACGACGCTCTTCCGATCT
->262
-ACACTTTTTCCCTACACGACGCTCTTCCGATCT
->263
-ACAGTCTTTCCCTACACGACGCTCTTCCGATCT
->264
-ACATTCTTTCCCTACACGACGCTCTTCCGATCT
->265
-ACCCTCTTTCCCTACACGACGCTCTTCCGATCT
->266
-ACGCTCTTTCCCTACACGACGCTCTTCCGATCT
->267
-ACTCTCTTTCCCTACACGACGCTCTTCCGATCT
->268
-ACTGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->269
-AGACTCTTTCCCTACACGACGCTCTTCCGATCT
->270
-AGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->271
-AGTGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->272
-ATACTCTTTCCCTACACGACGCTCTTCCGATCT
->273
-ATTGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->274
-CAAACAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->275
-CAAACAGAAGACGGCATACGAGCTCTTCCGATCT
->276
-CAACCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->277
-CAACCAGAAGACGGCATACGAGCTCTTCCGATCT
->278
-CAAGAAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->279
-CAAGAAGAAGACGGCATACGAGCTCTTCCGATCT
->280
-CAAGCAAAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->281
-CAAGCAAAAGACGGCATACGAGCTCTTCCGATCT
->282
-CAAGCACAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->283
-CAAGCACAAGACGGCATACGAGCTCTTCCGATCT
->284
-CAAGCAGAAAACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->285
-CAAGCAGAAAACGGCATACGAGCTCTTCCGATCT
->286
-CAAGCAGAACACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->287
-CAAGCAGAACACGGCATACGAGCTCTTCCGATCT
->288
-CAAGCAGAAGAAGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->289
-CAAGCAGAAGAAGGCATACGAGCTCTTCCGATCT
->290
-CAAGCAGAAGACAGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->291
-CAAGCAGAAGACAGCATACGAGCTCTTCCGATCT
->292
-CAAGCAGAAGACCGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->293
-CAAGCAGAAGACCGCATACGAGCTCTTCCGATCT
->294
-CAAGCAGAAGACGACATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->295
-CAAGCAGAAGACGACATACGAGCTCTTCCGATCT
->296
-CAAGCAGAAGACGCCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->297
-CAAGCAGAAGACGCCATACGAGCTCTTCCGATCT
->298
-CAAGCAGAAGACGGAATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->299
-CAAGCAGAAGACGGAATACGAGCTCTTCCGATCT
->300
-CAAGCAGAAGACGGCAAACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->301
-CAAGCAGAAGACGGCAAACGAGCTCTTCCGATCT
->302
-CAAGCAGAAGACGGCACACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->303
-CAAGCAGAAGACGGCACACGAGCTCTTCCGATCT
->304
-CAAGCAGAAGACGGCAGACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->305
-CAAGCAGAAGACGGCAGACGAGCTCTTCCGATCT
->306
-CAAGCAGAAGACGGCATAAGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->307
-CAAGCAGAAGACGGCATAAGAGCTCTTCCGATCT
->308
-CAAGCAGAAGACGGCATACAAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->309
-CAAGCAGAAGACGGCATACAAGCTCTTCCGATCT
->310
-CAAGCAGAAGACGGCATACCAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->311
-CAAGCAGAAGACGGCATACCAGCTCTTCCGATCT
->312
-CAAGCAGAAGACGGCATACGAAATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->313
-CAAGCAGAAGACGGCATACGAACTCTTCCGATCT
->314
-CAAGCAGAAGACGGCATACGACATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->315
-CAAGCAGAAGACGGCATACGACCTCTTCCGATCT
->316
-CAAGCAGAAGACGGCATACGAGAACGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->317
-CAAGCAGAAGACGGCATACGAGACCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->318
-CAAGCAGAAGACGGCATACGAGAGCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->319
-CAAGCAGAAGACGGCATACGAGATAGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->320
-CAAGCAGAAGACGGCATACGAGATCAGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->321
-CAAGCAGAAGACGGCATACGAGATCCGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->322
-CAAGCAGAAGACGGCATACGAGATCGATCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->323
-CAAGCAGAAGACGGCATACGAGATCGCTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->324
-CAAGCAGAAGACGGCATACGAGATCGGACTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->325
-CAAGCAGAAGACGGCATACGAGATCGGCCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->326
-CAAGCAGAAGACGGCATACGAGATCGGGCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->327
-CAAGCAGAAGACGGCATACGAGATCGGTATCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->328
-CAAGCAGAAGACGGCATACGAGATCGGTCACGGCATTCCTGCTGAACCGCTCTTCCGATCT
->329
-CAAGCAGAAGACGGCATACGAGATCGGTCCCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->330
-CAAGCAGAAGACGGCATACGAGATCGGTCGCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->331
-CAAGCAGAAGACGGCATACGAGATCGGTCTAGGCATTCCTGCTGAACCGCTCTTCCGATCT
->332
-CAAGCAGAAGACGGCATACGAGATCGGTCTCAGCATTCCTGCTGAACCGCTCTTCCGATCT
->333
-CAAGCAGAAGACGGCATACGAGATCGGTCTCCGCATTCCTGCTGAACCGCTCTTCCGATCT
->334
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGACATTCCTGCTGAACCGCTCTTCCGATCT
->335
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGCCATTCCTGCTGAACCGCTCTTCCGATCT
->336
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGAATTCCTGCTGAACCGCTCTTCCGATCT
->337
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCAATCCTGCTGAACCGCTCTTCCGATCT
->338
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCACTCCTGCTGAACCGCTCTTCCGATCT
->339
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCAGTCCTGCTGAACCGCTCTTCCGATCT
->340
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATACCTGCTGAACCGCTCTTCCGATCT
->341
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATCCCTGCTGAACCGCTCTTCCGATCT
->342
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATGCCTGCTGAACCGCTCTTCCGATCT
->343
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTACTGCTGAACCGCTCTTCCGATCT
->344
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCATGCTGAACCGCTCTTCCGATCT
->345
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCAGCTGAACCGCTCTTCCGATCT
->346
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCCGCTGAACCGCTCTTCCGATCT
->347
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCGGCTGAACCGCTCTTCCGATCT
->348
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTACTGAACCGCTCTTCCGATCT
->349
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTCCTGAACCGCTCTTCCGATCT
->350
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGATGAACCGCTCTTCCGATCT
->351
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCAGAACCGCTCTTCCGATCT
->352
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCCGAACCGCTCTTCCGATCT
->353
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCGGAACCGCTCTTCCGATCT
->354
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTAAACCGCTCTTCCGATCT
->355
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTCAACCGCTCTTCCGATCT
->356
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAAACGCTCTTCCGATCT
->357
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACAGCTCTTCCGATCT
->358
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCACTCTTCCGATCT
->359
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCCCTCTTCCGATCT
->360
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGATCTTCCGATCT
->361
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCACTTCCGATCT
->362
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCCCTTCCGATCT
->363
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCGCTTCCGATCT
->364
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTATTCCGATCT
->365
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCATCCGATCT
->366
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCCTCCGATCT
->367
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCGTCCGATCT
->368
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTACCGATCT
->369
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTCCCGATCT
->370
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTGCCGATCT
->371
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTACGATCT
->372
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCAGATCT
->373
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCAATCT
->374
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCCATCT
->375
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGAACT
->376
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGACCT
->377
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGAGCT
->378
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATAT
->379
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCA
->380
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCC
->381
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCG
->382
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->383
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATGT
->384
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATTT
->385
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGCTCT
->386
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGGTCT
->387
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGTTCT
->388
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCTATCT
->389
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCGGATCT
->390
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCTGATCT
->391
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTGCGATCT
->392
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTTCGATCT
->393
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTGTTCCGATCT
->394
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTTTTCCGATCT
->395
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGGTCTTCCGATCT
->396
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGTTCTTCCGATCT
->397
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCTCTCTTCCGATCT
->398
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACGGCTCTTCCGATCT
->399
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACTGCTCTTCCGATCT
->400
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAAGCGCTCTTCCGATCT
->401
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAATCGCTCTTCCGATCT
->402
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGACCCGCTCTTCCGATCT
->403
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAGCCGCTCTTCCGATCT
->404
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGATCCGCTCTTCCGATCT
->405
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGCACCGCTCTTCCGATCT
->406
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGGACCGCTCTTCCGATCT
->407
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGTACCGCTCTTCCGATCT
->408
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTTAACCGCTCTTCCGATCT
->409
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGGTGAACCGCTCTTCCGATCT
->410
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGTTGAACCGCTCTTCCGATCT
->411
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTTCTGAACCGCTCTTCCGATCT
->412
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCGTGCTGAACCGCTCTTCCGATCT
->413
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCTTGCTGAACCGCTCTTCCGATCT
->414
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTGCTGCTGAACCGCTCTTCCGATCT
->415
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTTCTGCTGAACCGCTCTTCCGATCT
->416
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCCTTCCTGCTGAACCGCTCTTCCGATCT
->417
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCGTTCCTGCTGAACCGCTCTTCCGATCT
->418
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCTTTCCTGCTGAACCGCTCTTCCGATCT
->419
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGGATTCCTGCTGAACCGCTCTTCCGATCT
->420
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGTATTCCTGCTGAACCGCTCTTCCGATCT
->421
-CAAGCAGAAGACGGCATACGAGATCGGTCTCGTCATTCCTGCTGAACCGCTCTTCCGATCT
->422
-CAAGCAGAAGACGGCATACGAGATCGGTCTCTGCATTCCTGCTGAACCGCTCTTCCGATCT
->423
-CAAGCAGAAGACGGCATACGAGATCGGTCTGGGCATTCCTGCTGAACCGCTCTTCCGATCT
->424
-CAAGCAGAAGACGGCATACGAGATCGGTCTTGGCATTCCTGCTGAACCGCTCTTCCGATCT
->425
-CAAGCAGAAGACGGCATACGAGATCGGTGTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->426
-CAAGCAGAAGACGGCATACGAGATCGGTTTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->427
-CAAGCAGAAGACGGCATACGAGATCGTTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->428
-CAAGCAGAAGACGGCATACGAGATCTGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->429
-CAAGCAGAAGACGGCATACGAGATCTTCCGATCT
->430
-CAAGCAGAAGACGGCATACGAGATGGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->431
-CAAGCAGAAGACGGCATACGAGATTGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->432
-CAAGCAGAAGACGGCATACGAGCACTTCCGATCT
->433
-CAAGCAGAAGACGGCATACGAGCCCTTCCGATCT
->434
-CAAGCAGAAGACGGCATACGAGCGCTTCCGATCT
->435
-CAAGCAGAAGACGGCATACGAGCTATTCCGATCT
->436
-CAAGCAGAAGACGGCATACGAGCTCATCCGATCT
->437
-CAAGCAGAAGACGGCATACGAGCTCCTCCGATCT
->438
-CAAGCAGAAGACGGCATACGAGCTCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->439
-CAAGCAGAAGACGGCATACGAGCTCGTCCGATCT
->440
-CAAGCAGAAGACGGCATACGAGCTCTACCGATCT
->441
-CAAGCAGAAGACGGCATACGAGCTCTCCCGATCT
->442
-CAAGCAGAAGACGGCATACGAGCTCTGCCGATCT
->443
-CAAGCAGAAGACGGCATACGAGCTCTTACGATCT
->444
-CAAGCAGAAGACGGCATACGAGCTCTTCAGATCT
->445
-CAAGCAGAAGACGGCATACGAGCTCTTCCAATCT
->446
-CAAGCAGAAGACGGCATACGAGCTCTTCCCATCT
->447
-CAAGCAGAAGACGGCATACGAGCTCTTCCGAACT
->448
-CAAGCAGAAGACGGCATACGAGCTCTTCCGACCT
->449
-CAAGCAGAAGACGGCATACGAGCTCTTCCGAGCT
->450
-CAAGCAGAAGACGGCATACGAGCTCTTCCGATAT
->451
-CAAGCAGAAGACGGCATACGAGCTCTTCCGATCA
->452
-CAAGCAGAAGACGGCATACGAGCTCTTCCGATCC
->453
-CAAGCAGAAGACGGCATACGAGCTCTTCCGATCG
->454
-CAAGCAGAAGACGGCATACGAGCTCTTCCGATCT
->455
-CAAGCAGAAGACGGCATACGAGCTCTTCCGATGT
->456
-CAAGCAGAAGACGGCATACGAGCTCTTCCGATTT
->457
-CAAGCAGAAGACGGCATACGAGCTCTTCCGCTCT
->458
-CAAGCAGAAGACGGCATACGAGCTCTTCCGGTCT
->459
-CAAGCAGAAGACGGCATACGAGCTCTTCCGTTCT
->460
-CAAGCAGAAGACGGCATACGAGCTCTTCCTATCT
->461
-CAAGCAGAAGACGGCATACGAGCTCTTCGGATCT
->462
-CAAGCAGAAGACGGCATACGAGCTCTTCTGATCT
->463
-CAAGCAGAAGACGGCATACGAGCTCTTGCGATCT
->464
-CAAGCAGAAGACGGCATACGAGCTCTTTCGATCT
->465
-CAAGCAGAAGACGGCATACGAGCTGTTCCGATCT
->466
-CAAGCAGAAGACGGCATACGAGCTTTTCCGATCT
->467
-CAAGCAGAAGACGGCATACGAGGTCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->468
-CAAGCAGAAGACGGCATACGAGGTCTTCCGATCT
->469
-CAAGCAGAAGACGGCATACGAGTTCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->470
-CAAGCAGAAGACGGCATACGAGTTCTTCCGATCT
->471
-CAAGCAGAAGACGGCATACGATATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->472
-CAAGCAGAAGACGGCATACGATCTCTTCCGATCT
->473
-CAAGCAGAAGACGGCATACGCGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->474
-CAAGCAGAAGACGGCATACGCGCTCTTCCGATCT
->475
-CAAGCAGAAGACGGCATACGGGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->476
-CAAGCAGAAGACGGCATACGGGCTCTTCCGATCT
->477
-CAAGCAGAAGACGGCATACGTGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->478
-CAAGCAGAAGACGGCATACGTGCTCTTCCGATCT
->479
-CAAGCAGAAGACGGCATACTAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->480
-CAAGCAGAAGACGGCATACTAGCTCTTCCGATCT
->481
-CAAGCAGAAGACGGCATAGGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->482
-CAAGCAGAAGACGGCATAGGAGCTCTTCCGATCT
->483
-CAAGCAGAAGACGGCATATGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->484
-CAAGCAGAAGACGGCATATGAGCTCTTCCGATCT
->485
-CAAGCAGAAGACGGCATCCGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->486
-CAAGCAGAAGACGGCATCCGAGCTCTTCCGATCT
->487
-CAAGCAGAAGACGGCATGCGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->488
-CAAGCAGAAGACGGCATGCGAGCTCTTCCGATCT
->489
-CAAGCAGAAGACGGCATTCGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->490
-CAAGCAGAAGACGGCATTCGAGCTCTTCCGATCT
->491
-CAAGCAGAAGACGGCCTACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->492
-CAAGCAGAAGACGGCCTACGAGCTCTTCCGATCT
->493
-CAAGCAGAAGACGGCGTACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->494
-CAAGCAGAAGACGGCGTACGAGCTCTTCCGATCT
->495
-CAAGCAGAAGACGGCTTACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->496
-CAAGCAGAAGACGGCTTACGAGCTCTTCCGATCT
->497
-CAAGCAGAAGACGGGATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->498
-CAAGCAGAAGACGGGATACGAGCTCTTCCGATCT
->499
-CAAGCAGAAGACGGTATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->500
-CAAGCAGAAGACGGTATACGAGCTCTTCCGATCT
->501
-CAAGCAGAAGACGTCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->502
-CAAGCAGAAGACGTCATACGAGCTCTTCCGATCT
->503
-CAAGCAGAAGACTGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->504
-CAAGCAGAAGACTGCATACGAGCTCTTCCGATCT
->505
-CAAGCAGAAGAGGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->506
-CAAGCAGAAGAGGGCATACGAGCTCTTCCGATCT
->507
-CAAGCAGAAGATGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->508
-CAAGCAGAAGATGGCATACGAGCTCTTCCGATCT
->509
-CAAGCAGAAGCCGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->510
-CAAGCAGAAGCCGGCATACGAGCTCTTCCGATCT
->511
-CAAGCAGAAGGCGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->512
-CAAGCAGAAGGCGGCATACGAGCTCTTCCGATCT
->513
-CAAGCAGAAGTCGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->514
-CAAGCAGAAGTCGGCATACGAGCTCTTCCGATCT
->515
-CAAGCAGAATACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->516
-CAAGCAGAATACGGCATACGAGCTCTTCCGATCT
->517
-CAAGCAGACGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->518
-CAAGCAGACGACGGCATACGAGCTCTTCCGATCT
->519
-CAAGCAGAGGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->520
-CAAGCAGAGGACGGCATACGAGCTCTTCCGATCT
->521
-CAAGCAGATGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->522
-CAAGCAGATGACGGCATACGAGCTCTTCCGATCT
->523
-CAAGCAGCAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->524
-CAAGCAGCAGACGGCATACGAGCTCTTCCGATCT
->525
-CAAGCAGGAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->526
-CAAGCAGGAGACGGCATACGAGCTCTTCCGATCT
->527
-CAAGCAGTAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->528
-CAAGCAGTAGACGGCATACGAGCTCTTCCGATCT
->529
-CAAGCATAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->530
-CAAGCATAAGACGGCATACGAGCTCTTCCGATCT
->531
-CAAGCCGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->532
-CAAGCCGAAGACGGCATACGAGCTCTTCCGATCT
->533
-CAAGCGGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->534
-CAAGCGGAAGACGGCATACGAGCTCTTCCGATCT
->535
-CAAGCTGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->536
-CAAGCTGAAGACGGCATACGAGCTCTTCCGATCT
->537
-CAAGGAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->538
-CAAGGAGAAGACGGCATACGAGCTCTTCCGATCT
->539
-CAAGTAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->540
-CAAGTAGAAGACGGCATACGAGCTCTTCCGATCT
->541
-CAATCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->542
-CAATCAGAAGACGGCATACGAGCTCTTCCGATCT
->543
-CACGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->544
-CACGCAGAAGACGGCATACGAGCTCTTCCGATCT
->545
-CAGGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->546
-CAGGCAGAAGACGGCATACGAGCTCTTCCGATCT
->547
-CAGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->548
-CATCGGAAGAGCGGTTCAGCAGGAATGCCGAG
->549
-CATCGGAAGAGCTCGTATGCCGTCTTCTGCTTG
->550
-CATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->551
-CATGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->552
-CATGCAGAAGACGGCATACGAGCTCTTCCGATCT
->553
-CCACTCTTTCCCTACACGACGCTCTTCCGATCT
->554
-CCAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->555
-CCAGCAGAAGACGGCATACGAGCTCTTCCGATCT
->556
-CCGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->557
-CGAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->558
-CGAGCAGAAGACGGCATACGAGCTCTTCCGATCT
->559
-CGATCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->560
-CGCTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->561
-CGGACTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->562
-CGGCCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->563
-CGGGCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->564
-CGGTATCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->565
-CGGTCACGGCATTCCTGCTGAACCGCTCTTCCGATCT
->566
-CGGTCCCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->567
-CGGTCGCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->568
-CGGTCTAGGCATTCCTGCTGAACCGCTCTTCCGATCT
->569
-CGGTCTCAGCATTCCTGCTGAACCGCTCTTCCGATCT
->570
-CGGTCTCCGCATTCCTGCTGAACCGCTCTTCCGATCT
->571
-CGGTCTCGACATTCCTGCTGAACCGCTCTTCCGATCT
->572
-CGGTCTCGCCATTCCTGCTGAACCGCTCTTCCGATCT
->573
-CGGTCTCGGAATTCCTGCTGAACCGCTCTTCCGATCT
->574
-CGGTCTCGGCAATCCTGCTGAACCGCTCTTCCGATCT
->575
-CGGTCTCGGCACTCCTGCTGAACCGCTCTTCCGATCT
->576
-CGGTCTCGGCAGTCCTGCTGAACCGCTCTTCCGATCT
->577
-CGGTCTCGGCATACCTGCTGAACCGCTCTTCCGATCT
->578
-CGGTCTCGGCATCCCTGCTGAACCGCTCTTCCGATCT
->579
-CGGTCTCGGCATGCCTGCTGAACCGCTCTTCCGATCT
->580
-CGGTCTCGGCATTACTGCTGAACCGCTCTTCCGATCT
->581
-CGGTCTCGGCATTCATGCTGAACCGCTCTTCCGATCT
->582
-CGGTCTCGGCATTCCAGCTGAACCGCTCTTCCGATCT
->583
-CGGTCTCGGCATTCCCGCTGAACCGCTCTTCCGATCT
->584
-CGGTCTCGGCATTCCGGCTGAACCGCTCTTCCGATCT
->585
-CGGTCTCGGCATTCCTACTGAACCGCTCTTCCGATCT
->586
-CGGTCTCGGCATTCCTCCTGAACCGCTCTTCCGATCT
->587
-CGGTCTCGGCATTCCTGATGAACCGCTCTTCCGATCT
->588
-CGGTCTCGGCATTCCTGCAGAACCGCTCTTCCGATCT
->589
-CGGTCTCGGCATTCCTGCCGAACCGCTCTTCCGATCT
->590
-CGGTCTCGGCATTCCTGCGGAACCGCTCTTCCGATCT
->591
-CGGTCTCGGCATTCCTGCTAAACCGCTCTTCCGATCT
->592
-CGGTCTCGGCATTCCTGCTCAACCGCTCTTCCGATCT
->593
-CGGTCTCGGCATTCCTGCTGAAACGCTCTTCCGATCT
->594
-CGGTCTCGGCATTCCTGCTGAACAGCTCTTCCGATCT
->595
-CGGTCTCGGCATTCCTGCTGAACCACTCTTCCGATCT
->596
-CGGTCTCGGCATTCCTGCTGAACCCCTCTTCCGATCT
->597
-CGGTCTCGGCATTCCTGCTGAACCGATCTTCCGATCT
->598
-CGGTCTCGGCATTCCTGCTGAACCGCACTTCCGATCT
->599
-CGGTCTCGGCATTCCTGCTGAACCGCCCTTCCGATCT
->600
-CGGTCTCGGCATTCCTGCTGAACCGCGCTTCCGATCT
->601
-CGGTCTCGGCATTCCTGCTGAACCGCTATTCCGATCT
->602
-CGGTCTCGGCATTCCTGCTGAACCGCTCATCCGATCT
->603
-CGGTCTCGGCATTCCTGCTGAACCGCTCCTCCGATCT
->604
-CGGTCTCGGCATTCCTGCTGAACCGCTCGTCCGATCT
->605
-CGGTCTCGGCATTCCTGCTGAACCGCTCTACCGATCT
->606
-CGGTCTCGGCATTCCTGCTGAACCGCTCTCCCGATCT
->607
-CGGTCTCGGCATTCCTGCTGAACCGCTCTGCCGATCT
->608
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTACGATCT
->609
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCAGATCT
->610
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCAATCT
->611
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCCATCT
->612
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGAACT
->613
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGACCT
->614
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGAGCT
->615
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATAT
->616
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCA
->617
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCC
->618
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCG
->619
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->620
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATGT
->621
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATTT
->622
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGCTCT
->623
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGGTCT
->624
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGTTCT
->625
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCCTATCT
->626
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCGGATCT
->627
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTCTGATCT
->628
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTGCGATCT
->629
-CGGTCTCGGCATTCCTGCTGAACCGCTCTTTCGATCT
->630
-CGGTCTCGGCATTCCTGCTGAACCGCTGTTCCGATCT
->631
-CGGTCTCGGCATTCCTGCTGAACCGCTTTTCCGATCT
->632
-CGGTCTCGGCATTCCTGCTGAACCGGTCTTCCGATCT
->633
-CGGTCTCGGCATTCCTGCTGAACCGTTCTTCCGATCT
->634
-CGGTCTCGGCATTCCTGCTGAACCTCTCTTCCGATCT
->635
-CGGTCTCGGCATTCCTGCTGAACGGCTCTTCCGATCT
->636
-CGGTCTCGGCATTCCTGCTGAACTGCTCTTCCGATCT
->637
-CGGTCTCGGCATTCCTGCTGAAGCGCTCTTCCGATCT
->638
-CGGTCTCGGCATTCCTGCTGAATCGCTCTTCCGATCT
->639
-CGGTCTCGGCATTCCTGCTGACCCGCTCTTCCGATCT
->640
-CGGTCTCGGCATTCCTGCTGAGCCGCTCTTCCGATCT
->641
-CGGTCTCGGCATTCCTGCTGATCCGCTCTTCCGATCT
->642
-CGGTCTCGGCATTCCTGCTGCACCGCTCTTCCGATCT
->643
-CGGTCTCGGCATTCCTGCTGGACCGCTCTTCCGATCT
->644
-CGGTCTCGGCATTCCTGCTGTACCGCTCTTCCGATCT
->645
-CGGTCTCGGCATTCCTGCTTAACCGCTCTTCCGATCT
->646
-CGGTCTCGGCATTCCTGGTGAACCGCTCTTCCGATCT
->647
-CGGTCTCGGCATTCCTGTTGAACCGCTCTTCCGATCT
->648
-CGGTCTCGGCATTCCTTCTGAACCGCTCTTCCGATCT
->649
-CGGTCTCGGCATTCGTGCTGAACCGCTCTTCCGATCT
->650
-CGGTCTCGGCATTCTTGCTGAACCGCTCTTCCGATCT
->651
-CGGTCTCGGCATTGCTGCTGAACCGCTCTTCCGATCT
->652
-CGGTCTCGGCATTTCTGCTGAACCGCTCTTCCGATCT
->653
-CGGTCTCGGCCTTCCTGCTGAACCGCTCTTCCGATCT
->654
-CGGTCTCGGCGTTCCTGCTGAACCGCTCTTCCGATCT
->655
-CGGTCTCGGCTTTCCTGCTGAACCGCTCTTCCGATCT
->656
-CGGTCTCGGGATTCCTGCTGAACCGCTCTTCCGATCT
->657
-CGGTCTCGGTATTCCTGCTGAACCGCTCTTCCGATCT
->658
-CGGTCTCGTCATTCCTGCTGAACCGCTCTTCCGATCT
->659
-CGGTCTCTGCATTCCTGCTGAACCGCTCTTCCGATCT
->660
-CGGTCTGGGCATTCCTGCTGAACCGCTCTTCCGATCT
->661
-CGGTCTTGGCATTCCTGCTGAACCGCTCTTCCGATCT
->662
-CGGTGTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->663
-CGGTTTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->664
-CGTTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->665
-CTAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->666
-CTAGCAGAAGACGGCATACGAGCTCTTCCGATCT
->667
-CTGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->668
-GAACGGAAGAGCGGTTCAGCAGGAATGCCGAG
->669
-GAACGGAAGAGCTCGTATGCCGTCTTCTGCTTG
->670
-GAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->671
-GAAGCAGAAGACGGCATACGAGCTCTTCCGATCT
->672
-GACCGGAAGAGCGGTTCAGCAGGAATGCCGAG
->673
-GACCGGAAGAGCTCGTATGCCGTCTTCTGCTTG
->674
-GAGCGGAAGAGCGGTTCAGCAGGAATGCCGAG
->675
-GAGCGGAAGAGCTCGTATGCCGTCTTCTGCTTG
->676
-GATAGGAAGAGCGGTTCAGCAGGAATGCCGAG
->677
-GATAGGAAGAGCTCGTATGCCGTCTTCTGCTTG
->678
-GATCAGAAGAGCGGTTCAGCAGGAATGCCGAG
->679
-GATCAGAAGAGCTCGTATGCCGTCTTCTGCTTG
->680
-GATCCGAAGAGCGGTTCAGCAGGAATGCCGAG
->681
-GATCCGAAGAGCTCGTATGCCGTCTTCTGCTTG
->682
-GATCGAAAGAGCGGTTCAGCAGGAATGCCGAG
->683
-GATCGAAAGAGCTCGTATGCCGTCTTCTGCTTG
->684
-GATCGCAAGAGCGGTTCAGCAGGAATGCCGAG
->685
-GATCGCAAGAGCTCGTATGCCGTCTTCTGCTTG
->686
-GATCGGAAAAGCGGTTCAGCAGGAATGCCGAG
->687
-GATCGGAAAAGCTCGTATGCCGTCTTCTGCTTG
->688
-GATCGGAACAGCGGTTCAGCAGGAATGCCGAG
->689
-GATCGGAACAGCTCGTATGCCGTCTTCTGCTTG
->690
-GATCGGAAGAACGGTTCAGCAGGAATGCCGAG
->691
-GATCGGAAGAACTCGTATGCCGTCTTCTGCTTG
->692
-GATCGGAAGACCGGTTCAGCAGGAATGCCGAG
->693
-GATCGGAAGACCTCGTATGCCGTCTTCTGCTTG
->694
-GATCGGAAGAGAGGTTCAGCAGGAATGCCGAG
->695
-GATCGGAAGAGATCGTATGCCGTCTTCTGCTTG
->696
-GATCGGAAGAGCACGTATGCCGTCTTCTGCTTG
->697
-GATCGGAAGAGCAGTTCAGCAGGAATGCCGAG
->698
-GATCGGAAGAGCCCGTATGCCGTCTTCTGCTTG
->699
-GATCGGAAGAGCCGTTCAGCAGGAATGCCGAG
->700
-GATCGGAAGAGCGATTCAGCAGGAATGCCGAG
->701
-GATCGGAAGAGCGCGTATGCCGTCTTCTGCTTG
->702
-GATCGGAAGAGCGCTTCAGCAGGAATGCCGAG
->703
-GATCGGAAGAGCGGATCAGCAGGAATGCCGAG
->704
-GATCGGAAGAGCGGCTCAGCAGGAATGCCGAG
->705
-GATCGGAAGAGCGGGTCAGCAGGAATGCCGAG
->706
-GATCGGAAGAGCGGTACAGCAGGAATGCCGAG
->707
-GATCGGAAGAGCGGTCCAGCAGGAATGCCGAG
->708
-GATCGGAAGAGCGGTGCAGCAGGAATGCCGAG
->709
-GATCGGAAGAGCGGTTAAGCAGGAATGCCGAG
->710
-GATCGGAAGAGCGGTTCAACAGGAATGCCGAG
->711
-GATCGGAAGAGCGGTTCACCAGGAATGCCGAG
->712
-GATCGGAAGAGCGGTTCAGAAGGAATGCCGAG
->713
-GATCGGAAGAGCGGTTCAGCAAGAATGCCGAG
->714
-GATCGGAAGAGCGGTTCAGCACGAATGCCGAG
->715
-GATCGGAAGAGCGGTTCAGCAGAAATGCCGAG
->716
-GATCGGAAGAGCGGTTCAGCAGCAATGCCGAG
->717
-GATCGGAAGAGCGGTTCAGCAGGAAAGCCGAG
->718
-GATCGGAAGAGCGGTTCAGCAGGAACGCCGAG
->719
-GATCGGAAGAGCGGTTCAGCAGGAAGGCCGAG
->720
-GATCGGAAGAGCGGTTCAGCAGGAATACCGAG
->721
-GATCGGAAGAGCGGTTCAGCAGGAATCCCGAG
->722
-GATCGGAAGAGCGGTTCAGCAGGAATGACGAG
->723
-GATCGGAAGAGCGGTTCAGCAGGAATGCAGAG
->724
-GATCGGAAGAGCGGTTCAGCAGGAATGCCAAG
->725
-GATCGGAAGAGCGGTTCAGCAGGAATGCCCAG
->726
-GATCGGAAGAGCGGTTCAGCAGGAATGCCGAA
->727
-GATCGGAAGAGCGGTTCAGCAGGAATGCCGAC
->728
-GATCGGAAGAGCGGTTCAGCAGGAATGCCGAG
->729
-GATCGGAAGAGCGGTTCAGCAGGAATGCCGAT
->730
-GATCGGAAGAGCGGTTCAGCAGGAATGCCGCG
->731
-GATCGGAAGAGCGGTTCAGCAGGAATGCCGGG
->732
-GATCGGAAGAGCGGTTCAGCAGGAATGCCGTG
->733
-GATCGGAAGAGCGGTTCAGCAGGAATGCCTAG
->734
-GATCGGAAGAGCGGTTCAGCAGGAATGCGGAG
->735
-GATCGGAAGAGCGGTTCAGCAGGAATGCTGAG
->736
-GATCGGAAGAGCGGTTCAGCAGGAATGGCGAG
->737
-GATCGGAAGAGCGGTTCAGCAGGAATGTCGAG
->738
-GATCGGAAGAGCGGTTCAGCAGGAATTCCGAG
->739
-GATCGGAAGAGCGGTTCAGCAGGACTGCCGAG
->740
-GATCGGAAGAGCGGTTCAGCAGGAGTGCCGAG
->741
-GATCGGAAGAGCGGTTCAGCAGGATTGCCGAG
->742
-GATCGGAAGAGCGGTTCAGCAGGCATGCCGAG
->743
-GATCGGAAGAGCGGTTCAGCAGGGATGCCGAG
->744
-GATCGGAAGAGCGGTTCAGCAGGTATGCCGAG
->745
-GATCGGAAGAGCGGTTCAGCAGTAATGCCGAG
->746
-GATCGGAAGAGCGGTTCAGCATGAATGCCGAG
->747
-GATCGGAAGAGCGGTTCAGCCGGAATGCCGAG
->748
-GATCGGAAGAGCGGTTCAGCGGGAATGCCGAG
->749
-GATCGGAAGAGCGGTTCAGCTGGAATGCCGAG
->750
-GATCGGAAGAGCGGTTCAGGAGGAATGCCGAG
->751
-GATCGGAAGAGCGGTTCAGTAGGAATGCCGAG
->752
-GATCGGAAGAGCGGTTCATCAGGAATGCCGAG
->753
-GATCGGAAGAGCGGTTCCGCAGGAATGCCGAG
->754
-GATCGGAAGAGCGGTTCGGCAGGAATGCCGAG
->755
-GATCGGAAGAGCGGTTCTGCAGGAATGCCGAG
->756
-GATCGGAAGAGCGGTTGAGCAGGAATGCCGAG
->757
-GATCGGAAGAGCGGTTTAGCAGGAATGCCGAG
->758
-GATCGGAAGAGCGTTTCAGCAGGAATGCCGAG
->759
-GATCGGAAGAGCTAGTATGCCGTCTTCTGCTTG
->760
-GATCGGAAGAGCTCATATGCCGTCTTCTGCTTG
->761
-GATCGGAAGAGCTCCTATGCCGTCTTCTGCTTG
->762
-GATCGGAAGAGCTCGAATGCCGTCTTCTGCTTG
->763
-GATCGGAAGAGCTCGCATGCCGTCTTCTGCTTG
->764
-GATCGGAAGAGCTCGGATGCCGTCTTCTGCTTG
->765
-GATCGGAAGAGCTCGTAAGCCGTCTTCTGCTTG
->766
-GATCGGAAGAGCTCGTACGCCGTCTTCTGCTTG
->767
-GATCGGAAGAGCTCGTAGGCCGTCTTCTGCTTG
->768
-GATCGGAAGAGCTCGTATACCGTCTTCTGCTTG
->769
-GATCGGAAGAGCTCGTATCCCGTCTTCTGCTTG
->770
-GATCGGAAGAGCTCGTATGACGTCTTCTGCTTG
->771
-GATCGGAAGAGCTCGTATGCAGTCTTCTGCTTG
->772
-GATCGGAAGAGCTCGTATGCCATCTTCTGCTTG
->773
-GATCGGAAGAGCTCGTATGCCCTCTTCTGCTTG
->774
-GATCGGAAGAGCTCGTATGCCGACTTCTGCTTG
->775
-GATCGGAAGAGCTCGTATGCCGCCTTCTGCTTG
->776
-GATCGGAAGAGCTCGTATGCCGGCTTCTGCTTG
->777
-GATCGGAAGAGCTCGTATGCCGTATTCTGCTTG
->778
-GATCGGAAGAGCTCGTATGCCGTCATCTGCTTG
->779
-GATCGGAAGAGCTCGTATGCCGTCCTCTGCTTG
->780
-GATCGGAAGAGCTCGTATGCCGTCGTCTGCTTG
->781
-GATCGGAAGAGCTCGTATGCCGTCTACTGCTTG
->782
-GATCGGAAGAGCTCGTATGCCGTCTCCTGCTTG
->783
-GATCGGAAGAGCTCGTATGCCGTCTGCTGCTTG
->784
-GATCGGAAGAGCTCGTATGCCGTCTTATGCTTG
->785
-GATCGGAAGAGCTCGTATGCCGTCTTCAGCTTG
->786
-GATCGGAAGAGCTCGTATGCCGTCTTCCGCTTG
->787
-GATCGGAAGAGCTCGTATGCCGTCTTCGGCTTG
->788
-GATCGGAAGAGCTCGTATGCCGTCTTCTACTTG
->789
-GATCGGAAGAGCTCGTATGCCGTCTTCTCCTTG
->790
-GATCGGAAGAGCTCGTATGCCGTCTTCTGATTG
->791
-GATCGGAAGAGCTCGTATGCCGTCTTCTGCATG
->792
-GATCGGAAGAGCTCGTATGCCGTCTTCTGCCTG
->793
-GATCGGAAGAGCTCGTATGCCGTCTTCTGCGTG
->794
-GATCGGAAGAGCTCGTATGCCGTCTTCTGCTAG
->795
-GATCGGAAGAGCTCGTATGCCGTCTTCTGCTCG
->796
-GATCGGAAGAGCTCGTATGCCGTCTTCTGCTGG
->797
-GATCGGAAGAGCTCGTATGCCGTCTTCTGCTTA
->798
-GATCGGAAGAGCTCGTATGCCGTCTTCTGCTTC
->799
-GATCGGAAGAGCTCGTATGCCGTCTTCTGCTTG
->800
-GATCGGAAGAGCTCGTATGCCGTCTTCTGCTTT
->801
-GATCGGAAGAGCTCGTATGCCGTCTTCTGGTTG
->802
-GATCGGAAGAGCTCGTATGCCGTCTTCTGTTTG
->803
-GATCGGAAGAGCTCGTATGCCGTCTTCTTCTTG
->804
-GATCGGAAGAGCTCGTATGCCGTCTTGTGCTTG
->805
-GATCGGAAGAGCTCGTATGCCGTCTTTTGCTTG
->806
-GATCGGAAGAGCTCGTATGCCGTGTTCTGCTTG
->807
-GATCGGAAGAGCTCGTATGCCGTTTTCTGCTTG
->808
-GATCGGAAGAGCTCGTATGCCTTCTTCTGCTTG
->809
-GATCGGAAGAGCTCGTATGCGGTCTTCTGCTTG
->810
-GATCGGAAGAGCTCGTATGCTGTCTTCTGCTTG
->811
-GATCGGAAGAGCTCGTATGGCGTCTTCTGCTTG
->812
-GATCGGAAGAGCTCGTATGTCGTCTTCTGCTTG
->813
-GATCGGAAGAGCTCGTATTCCGTCTTCTGCTTG
->814
-GATCGGAAGAGCTCGTCTGCCGTCTTCTGCTTG
->815
-GATCGGAAGAGCTCGTGTGCCGTCTTCTGCTTG
->816
-GATCGGAAGAGCTCGTTTGCCGTCTTCTGCTTG
->817
-GATCGGAAGAGCTCTTATGCCGTCTTCTGCTTG
->818
-GATCGGAAGAGCTGGTATGCCGTCTTCTGCTTG
->819
-GATCGGAAGAGCTGTTCAGCAGGAATGCCGAG
->820
-GATCGGAAGAGCTTGTATGCCGTCTTCTGCTTG
->821
-GATCGGAAGAGGGGTTCAGCAGGAATGCCGAG
->822
-GATCGGAAGAGGTCGTATGCCGTCTTCTGCTTG
->823
-GATCGGAAGAGTGGTTCAGCAGGAATGCCGAG
->824
-GATCGGAAGAGTTCGTATGCCGTCTTCTGCTTG
->825
-GATCGGAAGATCGGTTCAGCAGGAATGCCGAG
->826
-GATCGGAAGATCTCGTATGCCGTCTTCTGCTTG
->827
-GATCGGAAGCGCGGTTCAGCAGGAATGCCGAG
->828
-GATCGGAAGCGCTCGTATGCCGTCTTCTGCTTG
->829
-GATCGGAAGGGCGGTTCAGCAGGAATGCCGAG
->830
-GATCGGAAGGGCTCGTATGCCGTCTTCTGCTTG
->831
-GATCGGAAGTGCGGTTCAGCAGGAATGCCGAG
->832
-GATCGGAAGTGCTCGTATGCCGTCTTCTGCTTG
->833
-GATCGGAATAGCGGTTCAGCAGGAATGCCGAG
->834
-GATCGGAATAGCTCGTATGCCGTCTTCTGCTTG
->835
-GATCGGACGAGCGGTTCAGCAGGAATGCCGAG
->836
-GATCGGACGAGCTCGTATGCCGTCTTCTGCTTG
->837
-GATCGGAGGAGCGGTTCAGCAGGAATGCCGAG
->838
-GATCGGAGGAGCTCGTATGCCGTCTTCTGCTTG
->839
-GATCGGATGAGCGGTTCAGCAGGAATGCCGAG
->840
-GATCGGATGAGCTCGTATGCCGTCTTCTGCTTG
->841
-GATCGGCAGAGCGGTTCAGCAGGAATGCCGAG
->842
-GATCGGCAGAGCTCGTATGCCGTCTTCTGCTTG
->843
-GATCGGGAGAGCGGTTCAGCAGGAATGCCGAG
->844
-GATCGGGAGAGCTCGTATGCCGTCTTCTGCTTG
->845
-GATCGGTAGAGCGGTTCAGCAGGAATGCCGAG
->846
-GATCGGTAGAGCTCGTATGCCGTCTTCTGCTTG
->847
-GATCGTAAGAGCGGTTCAGCAGGAATGCCGAG
->848
-GATCGTAAGAGCTCGTATGCCGTCTTCTGCTTG
->849
-GATCTGAAGAGCGGTTCAGCAGGAATGCCGAG
->850
-GATCTGAAGAGCTCGTATGCCGTCTTCTGCTTG
->851
-GATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->852
-GATGGGAAGAGCGGTTCAGCAGGAATGCCGAG
->853
-GATGGGAAGAGCTCGTATGCCGTCTTCTGCTTG
->854
-GATTGGAAGAGCGGTTCAGCAGGAATGCCGAG
->855
-GATTGGAAGAGCTCGTATGCCGTCTTCTGCTTG
->856
-GCACTCTTTCCCTACACGACGCTCTTCCGATCT
->857
-GCTCGGAAGAGCGGTTCAGCAGGAATGCCGAG
->858
-GCTCGGAAGAGCTCGTATGCCGTCTTCTGCTTG
->859
-GGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->860
-GGTCGGAAGAGCGGTTCAGCAGGAATGCCGAG
->861
-GGTCGGAAGAGCTCGTATGCCGTCTTCTGCTTG
->862
-GTTCGGAAGAGCGGTTCAGCAGGAATGCCGAG
->863
-GTTCGGAAGAGCTCGTATGCCGTCTTCTGCTTG
->864
-TAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
->865
-TAAGCAGAAGACGGCATACGAGCTCTTCCGATCT
->866
-TATCGGAAGAGCGGTTCAGCAGGAATGCCGAG
->867
-TATCGGAAGAGCTCGTATGCCGTCTTCTGCTTG
->868
-TATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCT
->869
-TCACTCTTTCCCTACACGACGCTCTTCCGATCT
->870
-TGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCT
diff --git a/data/adapter.jf b/data/adapter.jf
new file mode 100644
index 0000000..a75ae1e
Binary files /dev/null and b/data/adapter.jf differ
diff --git a/debian/changelog b/debian/changelog
index f5ffe9c..4da02f0 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,10 @@
+quorum (1.1.2-1) UNRELEASED; urgency=low
+
+  * New upstream release.
+  * Drop patch gcc-12.patch, present upstream.
+
+ -- Debian Janitor <janitor@jelmer.uk>  Sun, 26 Feb 2023 21:49:02 -0000
+
 quorum (1.1.1-7) unstable; urgency=medium
 
   * Fix build with gcc-12
diff --git a/debian/patches/gcc-12.patch b/debian/patches/gcc-12.patch
deleted file mode 100644
index fb6f790..0000000
--- a/debian/patches/gcc-12.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-Description: Fix build with gcc-12
-Bug-Debian: https://bugs.debian.org/1013026
-Author: Andreas Tille <tille@debian.org>
-Last-Update: Mon, 25 Jul 2022 09:34:19 +0200
-Forwarded: https://github.com/gmarcais/Quorum/issues/7
-
---- a/src/err_log.hpp
-+++ b/src/err_log.hpp
-@@ -39,7 +39,7 @@ private:
-     entry(type_t t, T p) : type(t), pos(p) {}
-   };
- 
--  struct greater_than_pos : std::unary_function<entry, bool> {
-+  struct greater_than_pos {
-     T pos;
-     bool operator()(entry& e) { return e.pos >= *pos; } // Compare the raw value of pos, not using the operator>=
-     greater_than_pos(T& pos_) : pos(pos_) { }
diff --git a/debian/patches/series b/debian/patches/series
index 9c147e3..e69de29 100644
--- a/debian/patches/series
+++ b/debian/patches/series
@@ -1 +0,0 @@
-gcc-12.patch
diff --git a/header-license b/header-license
deleted file mode 100644
index ae0fc28..0000000
--- a/header-license
+++ /dev/null
@@ -1,18 +0,0 @@
-/* Quorum
- * Copyright (C) 2012  Genome group at University of Maryland.
- * 
- * This program is free software: you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation, either version 3 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-
diff --git a/local.mk b/local.mk
deleted file mode 100644
index 4b9f387..0000000
--- a/local.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-# Build the easy install script
-bin_SCRIPTS += quorum_easy_install
-quorum_easy_install: quorum_easy_install.in Makefile
-	$(do_subst) < $< > $@
-	chmod +x $@
-distcheck: quorum_easy_install
-dist: quorum_easy_install
-
-AM_CXXFLAGS += -Werror
-
-# Count lines of code
-.PHONY: cloc
-cloc:
-	cloc --force-lang="Ruby,yaggo" --force-lang="make,am" --force-lang="make,mk" \
-	  --exclude-dir="gtest" --ignored=cloc_ignored_src_files \
-	  $(srcdir)/src $(srcdir)/include \
-	  $(srcdir)/Makefile.am $(srcdir)/*.mk
diff --git a/m4/.gitignore b/m4/.gitignore
deleted file mode 100644
index 5e7d273..0000000
--- a/m4/.gitignore
+++ /dev/null
@@ -1,4 +0,0 @@
-# Ignore everything in this directory
-*
-# Except this file
-!.gitignore
diff --git a/m4/libtool.m4 b/m4/libtool.m4
new file mode 100644
index 0000000..e7b6833
--- /dev/null
+++ b/m4/libtool.m4
@@ -0,0 +1,8427 @@
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+#   Copyright (C) 1996-2001, 2003-2019, 2021-2022 Free Software
+#   Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the  same
+# distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+])
+
+# serial 59 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+       [m4_default([$3],
+		   [m4_fatal([Libtool version $1 or higher is required],
+		             63)])],
+       [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+  *\ * | *\	*)
+    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS=$ltmain
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_PREPARE_CC_BASENAME
+# -----------------------
+m4_defun([_LT_PREPARE_CC_BASENAME], [
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in @S|@*""; do
+      case $cc_temp in
+        compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+        distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+])# _LT_PREPARE_CC_BASENAME
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
+# but that macro is also expanded into generated libtool script, which
+# arranges for $SED and $ECHO to be set by different means.
+m4_defun([_LT_CC_BASENAME],
+[m4_require([_LT_PREPARE_CC_BASENAME])dnl
+AC_REQUIRE([_LT_DECL_SED])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+func_cc_basename $1
+cc_basename=$func_cc_basename_result
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_DECL_FILECMD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
+m4_require([_LT_CMD_TRUNCATE])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options that allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}"; then
+   setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}"; then
+   setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test set != "${COLLECT_NAMES+set}"; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a '.a' archive for static linking (except MSVC and
+# ICC, which need '.lib').
+libext=a
+
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+old_CC=$CC
+old_CFLAGS=$CFLAGS
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    _LT_PATH_MAGIC
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
+
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from 'configure', and 'config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
+# 'config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain=$ac_aux_dir/ltmain.sh
+])# _LT_PROG_LTMAIN
+
+
+## ------------------------------------- ##
+## Accumulate code for creating libtool. ##
+## ------------------------------------- ##
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the 'libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+## ------------------------ ##
+## FIXME: Eliminate VARNAME ##
+## ------------------------ ##
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME.  Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+	[m4_ifval([$1], [$1], [$2])])
+    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+    m4_ifval([$4],
+	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+    lt_dict_add_subkey([lt_decl_dict], [$2],
+	[tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+  [0], [m4_fatal([$0: too few arguments: $#])],
+  [1], [m4_fatal([$0: too few arguments: $#: $1])],
+  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+     m4_if([$2], [],
+	   m4_quote(lt_decl_varnames),
+	m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to 'config.status' so that its
+# declaration there will have the same value as in 'configure'.  VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly.  In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags='_LT_TAGS'dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+#    # Some comment about what VAR is for.
+#    visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+					   [description])))[]dnl
+m4_pushdef([_libtool_name],
+    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+    [0], [_libtool_name=[$]$1],
+    [1], [_libtool_name=$lt_[]$1],
+    [2], [_libtool_name=$lt_[]$1],
+    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
+# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into 'config.status', and then the shell code to quote escape them in
+# for loops in 'config.status'.  Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+	dnl If the libtool generation code has been placed in $CONFIG_LT,
+	dnl instead of duplicating it all over again into config.status,
+	dnl then we will have config.status run $CONFIG_LT later, so it
+	dnl needs to know what name is stored there:
+        [AC_CONFIG_COMMANDS([libtool],
+            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+    dnl If the libtool generation code is destined for config.status,
+    dnl expand the accumulated commands and init code now:
+    [AC_CONFIG_COMMANDS([libtool],
+        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable.  If COMMENT is supplied, it is inserted after the
+# '#!' sequence but before initialization text begins.  After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script.  The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test 0 = "$lt_write_fail" && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+lt_cl_silent=false
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+  echo
+  AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+'$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+  -h, --help      print this help, then exit
+  -V, --version   print version number, then exit
+  -q, --quiet     do not print progress messages
+  -d, --debug     don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2011 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test 0 != $[#]
+do
+  case $[1] in
+    --version | --v* | -V )
+      echo "$lt_cl_version"; exit 0 ;;
+    --help | --h* | -h )
+      echo "$lt_cl_help"; exit 0 ;;
+    --debug | --d* | -d )
+      debug=: ;;
+    --quiet | --q* | --silent | --s* | -q )
+      lt_cl_silent=: ;;
+
+    -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try '$[0] --help' for more information.]) ;;
+
+    *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try '$[0] --help' for more information.]) ;;
+  esac
+  shift
+done
+
+if $lt_cl_silent; then
+  exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure.  Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+lt_cl_success=:
+test yes = "$silent" &&
+  lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars.  Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+  m4_if(_LT_TAG, [C], [
+    # See if we are running on zsh, and set the options that allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}"; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile=${ofile}T
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+# Generated automatically by $as_me ($PACKAGE) $VERSION
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+    cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_PREPARE_MUNGE_PATH_LIST
+_LT_PREPARE_CC_BASENAME
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test set != "${COLLECT_NAMES+set}"; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+  _LT_PROG_LTMAIN
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  $SED '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    RM='$RM'
+    ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+  [C],			[_LT_LANG(C)],
+  [C++],		[_LT_LANG(CXX)],
+  [Go],			[_LT_LANG(GO)],
+  [Java],		[_LT_LANG(GCJ)],
+  [Fortran 77],		[_LT_LANG(F77)],
+  [Fortran],		[_LT_LANG(FC)],
+  [Windows Resource],	[_LT_LANG(RC)],
+  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+    [_LT_LANG($1)],
+    [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+  [LT_SUPPORTED_TAG([$1])dnl
+  m4_append([_LT_TAGS], [$1 ])dnl
+  m4_define([_LT_LANG_]$1[_enabled], [])dnl
+  _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+m4_ifndef([AC_PROG_GO], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_GO.  When it is available in    #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+############################################################
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC],     [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+  fi
+fi
+if test -z "$GOC"; then
+  AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+  [LT_LANG(CXX)],
+  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+  [LT_LANG(F77)],
+  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+  [LT_LANG(FC)],
+  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+  [LT_LANG(GCJ)],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+    [LT_LANG(GCJ)],
+    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+      [LT_LANG(GCJ)],
+      [m4_ifdef([AC_PROG_GCJ],
+	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([A][M_PROG_GCJ],
+	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([LT_PROG_GCJ],
+	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+  [LT_LANG(GO)],
+  [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+  [LT_LANG(RC)],
+  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+  case $host_os in
+    rhapsody* | darwin*)
+    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+    AC_CHECK_TOOL([LIPO], [lipo], [:])
+    AC_CHECK_TOOL([OTOOL], [otool], [:])
+    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+    _LT_DECL([], [DSYMUTIL], [1],
+      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+    _LT_DECL([], [NMEDIT], [1],
+      [Tool to change global to local symbols on Mac OS X])
+    _LT_DECL([], [LIPO], [1],
+      [Tool to manipulate fat objects and archives on Mac OS X])
+    _LT_DECL([], [OTOOL], [1],
+      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+    _LT_DECL([], [OTOOL64], [1],
+      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+      [lt_cv_apple_cc_single_mod=no
+      if test -z "$LT_MULTI_MODULE"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi])
+
+    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+      [lt_cv_ld_exported_symbols_list],
+      [lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+	[lt_cv_ld_exported_symbols_list=yes],
+	[lt_cv_ld_exported_symbols_list=no])
+	LDFLAGS=$save_LDFLAGS
+    ])
+
+    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+      [lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+      echo "$AR $AR_FLAGS libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+      $AR $AR_FLAGS libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+    ])
+    case $host_os in
+    rhapsody* | darwin1.[[012]])
+      _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+    darwin*)
+      case $MACOSX_DEPLOYMENT_TARGET,$host in
+        10.[[012]],*|,*powerpc*-darwin[[5-8]]*)
+          _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+        *)
+          _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test yes = "$lt_cv_apple_cc_single_mod"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test yes = "$lt_cv_ld_exported_symbols_list"; then
+      _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
+    fi
+    if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_automatic, $1)=yes
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  if test yes = "$lt_cv_ld_force_load"; then
+    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+    m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+                  [FC],  [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+  else
+    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  fi
+  _LT_TAGVAR(link_all_deplibs, $1)=yes
+  _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
+  case $cc_basename in
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test yes = "$_lt_dar_can_shared"; then
+    output_verbose_link_cmd=func_echo_all
+    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    _LT_TAGVAR(archive_expsym_cmds, $1)="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    _LT_TAGVAR(module_expsym_cmds, $1)="$SED -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+    m4_if([$1], [CXX],
+[   if test yes != "$lt_cv_apple_cc_single_mod"; then
+      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+      _LT_TAGVAR(archive_expsym_cmds, $1)="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
+    fi
+],[])
+  else
+  _LT_TAGVAR(ld_shlibs, $1)=no
+  fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+if test set = "${lt_cv_aix_libpath+set}"; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+  [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+  lt_aix_libpath_sed='[
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }]'
+  _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi],[])
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib
+  fi
+  ])
+  aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
+])# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script that will find a shell with a builtin
+# printf (that we can use as an echo command).
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+case $ECHO in
+  printf*) AC_MSG_RESULT([printf]) ;;
+  print*) AC_MSG_RESULT([print -r]) ;;
+  *) AC_MSG_RESULT([cat]) ;;
+esac
+
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test "X`printf %s $ECHO`" = "X$ECHO" \
+      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[m4_require([_LT_DECL_SED])dnl
+AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
+  [Search for dependent libraries within DIR (or the compiler's sysroot
+   if not specified).])],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted.  We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case $with_sysroot in #(
+ yes)
+   if test yes = "$GCC"; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | $SED -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   AC_MSG_RESULT([$with_sysroot])
+   AC_MSG_ERROR([The sysroot must be an absolute path.])
+   ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and where our libraries should be installed.])])
+
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+  [AS_HELP_STRING([--disable-libtool-lock],
+    [avoid locking (might break parallel builds)])])
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out what ABI is being produced by ac_compile, and set mode
+  # options accordingly.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `$FILECMD conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE=32
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE=64
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    if test yes = "$lt_cv_prog_gnu_ld"; then
+      case `$FILECMD conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `$FILECMD conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+mips64*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    emul=elf
+    case `$FILECMD conftest.$ac_objext` in
+      *32-bit*)
+	emul="${emul}32"
+	;;
+      *64-bit*)
+	emul="${emul}64"
+	;;
+    esac
+    case `$FILECMD conftest.$ac_objext` in
+      *MSB*)
+	emul="${emul}btsmip"
+	;;
+      *LSB*)
+	emul="${emul}ltsmip"
+	;;
+    esac
+    case `$FILECMD conftest.$ac_objext` in
+      *N32*)
+	emul="${emul}n32"
+	;;
+    esac
+    LD="${LD-ld} -m $emul"
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.  Note that the listed cases only cover the
+  # situations where additional linker options are needed (such as when
+  # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+  # vice versa); the common cases where no linker options are needed do
+  # not appear in the list.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `$FILECMD conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    case `$FILECMD conftest.o` in
+	      *x86-64*)
+		LD="${LD-ld} -m elf32_x86_64"
+		;;
+	      *)
+		LD="${LD-ld} -m elf_i386"
+		;;
+	    esac
+	    ;;
+	  powerpc64le-*linux*)
+	    LD="${LD-ld} -m elf32lppclinux"
+	    ;;
+	  powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  powerpcle-*linux*)
+	    LD="${LD-ld} -m elf64lppc"
+	    ;;
+	  powerpc-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS=$CFLAGS
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_LANG_PUSH(C)
+     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_POP])
+  if test yes != "$lt_cv_cc_needs_belf"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS=$SAVE_CFLAGS
+  fi
+  ;;
+*-*solaris*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `$FILECMD conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*|x86_64-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD=${LD-ld}_sol2
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks=$enable_libtool_lock
+])# _LT_ENABLE_LOCK
+
+
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+_LT_DECL([], [AR], [1], [The archiver])
+
+# Use ARFLAGS variable as AR's operation code to sync the variable naming with
+# Automake.  If both AR_FLAGS and ARFLAGS are specified, AR_FLAGS should have
+# higher priority because thats what people were doing historically (setting
+# ARFLAGS for automake and AR_FLAGS for libtool).  FIXME: Make the AR_FLAGS
+# variable obsoleted/removed.
+
+test ${AR_FLAGS+y} || AR_FLAGS=${ARFLAGS-cr}
+lt_ar_flags=$AR_FLAGS
+_LT_DECL([], [lt_ar_flags], [0], [Flags to create an archive (by configure)])
+
+# Make AR_FLAGS overridable by 'make ARFLAGS='.  Don't try to run-time override
+# by AR_FLAGS because that was never working and AR_FLAGS is about to die.
+_LT_DECL([], [AR_FLAGS], [\@S|@{ARFLAGS-"\@S|@lt_ar_flags"}],
+         [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+  [lt_cv_ar_at_file=no
+   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+     [echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+      AC_TRY_EVAL([lt_ar_try])
+      if test 0 -eq "$ac_status"; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	AC_TRY_EVAL([lt_ar_try])
+	if test 0 -ne "$ac_status"; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+     ])
+  ])
+
+if test no = "$lt_cv_ar_at_file"; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+  [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[_LT_PROG_AR
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+    [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  bitrig* | openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+    [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+    [Whether to use a lock for old archive extraction])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$3"  ## exclude from sc_useless_quotes_in_assignment
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       $2=yes
+     fi
+   fi
+   $RM conftest*
+])
+
+if test yes = "[$]$2"; then
+    m4_if([$5], , :, [$5])
+else
+    m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                  [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   save_LDFLAGS=$LDFLAGS
+   LDFLAGS="$LDFLAGS $3"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&AS_MESSAGE_LOG_FD
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         $2=yes
+       fi
+     else
+       $2=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS=$save_LDFLAGS
+])
+
+if test yes = "[$]$2"; then
+    m4_if([$4], , :, [$4])
+else
+    m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+  i=0
+  teststring=ABCD
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  bitrig* | darwin* | dragonfly* | freebsd* | midnightbsd* | netbsd* | openbsd*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | $SED 's/.*[[	 ]]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+       test undefined != "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test X`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test 17 != "$i" # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+])
+if test -n "$lt_cv_sys_max_cmd_len"; then
+  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+  AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+    [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test yes = "$cross_compiling"; then :
+  [$4]
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+[#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisibility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}]
+_LT_EOF
+  if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
+    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) $1 ;;
+      x$lt_dlneed_uscore) $2 ;;
+      x$lt_dlunknown|x*) $3 ;;
+    esac
+  else :
+    # compilation failed
+    $3
+  fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test yes != "$enable_dlopen"; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen=load_add_on
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen=LoadLibrary
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+    # if libdl is installed we need to link against it
+    AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[
+    lt_cv_dlopen=dyld
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+    ;;
+
+  tpf*)
+    # Don't try to run any link tests for TPF.  We know it's impossible
+    # because TPF is a cross-compiler, and we know how we open DSOs.
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=no
+    ;;
+
+  *)
+    AC_CHECK_FUNC([shl_load],
+	  [lt_cv_dlopen=shl_load],
+      [AC_CHECK_LIB([dld], [shl_load],
+	    [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld],
+	[AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen=dlopen],
+	  [AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],
+	    [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld])
+	      ])
+	    ])
+	  ])
+	])
+      ])
+    ;;
+  esac
+
+  if test no = "$lt_cv_dlopen"; then
+    enable_dlopen=no
+  else
+    enable_dlopen=yes
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS=$CPPFLAGS
+    test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS=$LDFLAGS
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS=$LIBS
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    AC_CACHE_CHECK([whether a program can dlopen itself],
+	  lt_cv_dlopen_self, [dnl
+	  _LT_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+    ])
+
+    if test yes = "$lt_cv_dlopen_self"; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+	  lt_cv_dlopen_self_static, [dnl
+	  _LT_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+      ])
+    fi
+
+    CPPFLAGS=$save_CPPFLAGS
+    LDFLAGS=$save_LDFLAGS
+    LIBS=$save_LIBS
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+	 [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+	 [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+	 [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+     fi
+   fi
+   chmod u+w . 2>&AS_MESSAGE_LOG_FD
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+	[Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+
+hard_links=nottested
+if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
+  # do not overwrite the value of need_locks provided by the user
+  AC_MSG_CHECKING([if we can lock with hard links])
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  AC_MSG_RESULT([$hard_links])
+  if test no = "$hard_links"; then
+    AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe])
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+         [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/",
+  [Define to the sub-directory where libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+   test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then
+
+  # We can hardcode non-existent directories.
+  if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
+     test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
+    # Linking always hardcodes the temporary library directory.
+    _LT_TAGVAR(hardcode_action, $1)=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    _LT_TAGVAR(hardcode_action, $1)=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
+   test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+    [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -z "$STRIP"; then
+  AC_MSG_RESULT([no])
+else
+  if $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+    old_striplib="$STRIP --strip-debug"
+    striplib="$STRIP --strip-unneeded"
+    AC_MSG_RESULT([yes])
+  else
+    case $host_os in
+    darwin*)
+      # FIXME - insert some real tests, host_os isn't really good enough
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      AC_MSG_RESULT([yes])
+      ;;
+    freebsd*)
+      if $STRIP -V 2>&1 | $GREP "elftoolchain" >/dev/null; then
+        old_striplib="$STRIP --strip-debug"
+        striplib="$STRIP --strip-unneeded"
+        AC_MSG_RESULT([yes])
+      else
+        AC_MSG_RESULT([no])
+      fi
+      ;;
+    *)
+      AC_MSG_RESULT([no])
+      ;;
+    esac
+  fi
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+
+
+# _LT_PREPARE_MUNGE_PATH_LIST
+# ---------------------------
+# Make sure func_munge_path_list() is defined correctly.
+m4_defun([_LT_PREPARE_MUNGE_PATH_LIST],
+[[# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x@S|@2 in
+    x)
+        ;;
+    *:)
+        eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
+        ;;
+    x:*)
+        eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
+        ;;
+    *)
+        eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+]])# _LT_PREPARE_PATH_LIST
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+	[], [
+if test yes = "$GCC"; then
+  case $host_os in
+    darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+    *) lt_awk_arg='/^libraries:/' ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;;
+    *) lt_sed_strip_eq='s|=/|/|g' ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary...
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  # ...but if some path component already ends with the multilib dir we assume
+  # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+  case "$lt_multi_os_dir; $lt_search_path_spec " in
+  "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+    lt_multi_os_dir=
+    ;;
+  esac
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+    elif test -n "$lt_multi_os_dir"; then
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS = " "; FS = "/|\n";} {
+  lt_foo = "";
+  lt_count = 0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo = "/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=.so
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+AC_ARG_VAR([LT_SYS_LIBRARY_PATH],
+[User-defined run-time library search path.])
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='$libname$release$shared_ext$major'
+  ;;
+
+aix[[4-9]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test ia64 = "$host_cpu"; then
+    # AIX 5 supports IA64
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[[01]] | aix4.[[01]].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a[(]lib.so.V[)]'
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='$libname$shared_ext'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[[45]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo $libname | $SED -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+m4_if([$1], [],[
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo $libname | $SED -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl* | *,icl*)
+    # Native MSVC or ICC
+    libname_spec='$name'
+    soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec=$LIB
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC and ICC wrapper
+    library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly* | midnightbsd*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[[23]].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
+    fi
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[[3-9]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test yes = "$lt_cv_prog_gnu_ld"; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+    [lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+	 [lt_cv_shlibpath_overrides_runpath=yes])])
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+    ])
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd* | bitrig*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec=/usr/lib
+  need_lib_prefix=no
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
+  else
+    need_version=yes
+  fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+os2*)
+  libname_spec='$name'
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test yes = "$with_gnu_ld"; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec; then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=sco
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test yes = "$with_gnu_ld"; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test no = "$dynamic_linker" && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test yes = "$GCC"; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
+fi
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
+fi
+
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+_LT_DECL([], [variables_saved_for_relink], [1],
+    [Variables whose values should be saved in libtool wrapper scripts and
+    restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+    [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+    [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+    [[List of archive names.  First name is the real one, the rest are links.
+    The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+    [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+    [Permission mode override for installation of shared libraries])
+_LT_DECL([], [postinstall_cmds], [2],
+    [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+    [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+    [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+    [[As "finish_cmds", except a single script fragment to be evaled but
+    not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+    [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+    [Compile-time system search path for libraries])
+_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2],
+    [Detected run-time system search path for libraries])
+_LT_DECL([], [configure_time_lt_sys_library_path], [2],
+    [Explicit LT_SYS_LIBRARY_PATH set during ./configure time])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program that can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] |  ?:[\\/]*])
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="m4_if([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$1"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
+  ;;
+esac])
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
+else
+  AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program that can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])# _LT_PATH_MAGIC
+
+
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+AC_ARG_WITH([gnu-ld],
+    [AS_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test no = "$withval" || with_gnu_ld=yes],
+    [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test yes = "$GCC"; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by $CC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return, which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | ?:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD=$ac_prog
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test yes = "$with_gnu_ld"; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD=$ac_dir/$ac_prog
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test no != "$with_gnu_ld" && break
+	;;
+      *)
+	test yes != "$with_gnu_ld" && break
+	;;
+      esac
+    fi
+  done
+  IFS=$lt_save_ifs
+else
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
+fi])
+LD=$lt_cv_path_LD
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+  lt_cv_ld_reload_flag,
+  [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test yes != "$GCC"; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test yes = "$GCC"; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_PATH_DD
+# -----------
+# find a working dd
+m4_defun([_LT_PATH_DD],
+[AC_CACHE_CHECK([for a working dd], [ac_cv_path_lt_DD],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd],
+[if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi])
+rm -f conftest.i conftest2.i conftest.out])
+])# _LT_PATH_DD
+
+
+# _LT_CMD_TRUNCATE
+# ----------------
+# find command to truncate a binary pipe
+m4_defun([_LT_CMD_TRUNCATE],
+[m4_require([_LT_PATH_DD])
+AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"])
+_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1],
+  [Command to truncate a binary pipe])
+])# _LT_CMD_TRUNCATE
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# 'unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[[45]]*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='$FILECMD -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly* | midnightbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=$FILECMD
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=$FILECMD
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[[3-9]]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd* | netbsdelf*-gnu)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=$FILECMD
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd* | bitrig*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+os2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+    [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+    [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+    [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+    [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM=$NM
+else
+  lt_nm_to_check=${ac_tool_prefix}nm
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS=$lt_save_ifs
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm=$ac_dir/$lt_tmp_nm
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the 'sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	# MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+	case $build_os in
+	mingw*) lt_bad_file=conftest.nm/nofile ;;
+	*) lt_bad_file=/dev/null ;;
+	esac
+	case `"$tmp_nm" -B $lt_bad_file 2>&1 | $SED '1q'` in
+	*$lt_bad_file* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break 2
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | $SED '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break 2
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS=$lt_save_ifs
+  done
+  : ${lt_cv_path_NM=no}
+fi])
+if test no != "$lt_cv_path_NM"; then
+  NM=$lt_cv_path_NM
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | $SED '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols -headers"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+  AC_SUBST([DUMPBIN])
+  if test : != "$DUMPBIN"; then
+    NM=$DUMPBIN
+  fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+  [lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+  cat conftest.out >&AS_MESSAGE_LOG_FD
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+#  -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh;
+  # decide which one to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd=$ECHO
+  ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+    [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+  [lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*])
+if test yes != "$lt_cv_path_mainfest_tool"; then
+  MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
+
+# _LT_DLL_DEF_P([FILE])
+# ---------------------
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with func_dll_def_p in the libtool script
+AC_DEFUN([_LT_DLL_DEF_P],
+[dnl
+  test DEF = "`$SED -n dnl
+    -e '\''s/^[[	 ]]*//'\'' dnl Strip leading whitespace
+    -e '\''/^\(;.*\)*$/d'\'' dnl      Delete empty lines and comments
+    -e '\''s/^\(EXPORTS\|LIBRARY\)\([[	 ]].*\)*$/DEF/p'\'' dnl
+    -e q dnl                          Only consider the first "real" line
+    $1`" dnl
+])# _LT_DLL_DEF_P
+
+
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
+  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, cos, LIBM=-lm)
+  ;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+
+
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test yes = "$GCC"; then
+  case $cc_basename in
+  nvcc*)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+  esac
+
+  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+    lt_cv_prog_compiler_rtti_exceptions,
+    [-fno-rtti -fno-exceptions], [],
+    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+	[Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[[ABCDGISTW]]'
+  ;;
+hpux*)
+  if test ia64 = "$host_cpu"; then
+    symcode='[[ABCDEGRST]]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris*)
+  symcode='[[BDRT]]'
+  ;;
+sco3.2v5*)
+  symcode='[[DT]]'
+  ;;
+sysv4.2uw2*)
+  symcode='[[DT]]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[[ABDT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  # Gets list of data symbols to import.
+  lt_cv_sys_global_symbol_to_import="$SED -n -e 's/^I .* \(.*\)$/\1/p'"
+  # Adjust the below global symbol transforms to fixup imported variables.
+  lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+  lt_c_name_hook=" -e 's/^I .* \(.*\)$/  {\"\1\", (void *) 0},/p'"
+  lt_c_name_lib_hook="\
+  -e 's/^I .* \(lib.*\)$/  {\"\1\", (void *) 0},/p'\
+  -e 's/^I .* \(.*\)$/  {\"lib\1\", (void *) 0},/p'"
+else
+  # Disable hooks by default.
+  lt_cv_sys_global_symbol_to_import=
+  lt_cdecl_hook=
+  lt_c_name_hook=
+  lt_c_name_lib_hook=
+fi
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="$SED -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="$SED -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="$SED -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/  {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"lib\1\", (void *) \&\1},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function,
+    # D for any global variable and I for any imported variable.
+    # Also find C++ and __fastcall symbols from MSVC++ or ICC,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK ['"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+"     /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+"     /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+"     {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+"     s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx]"
+  else
+    lt_cv_sys_global_symbol_pipe="$SED -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | $SED '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    $ECHO "$as_me:$LINENO: $NM conftest.$ac_objext | $lt_cv_sys_global_symbol_pipe > $nlist" >&AS_MESSAGE_LOG_FD
+    if eval "$NM" conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist 2>&AS_MESSAGE_LOG_FD && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT@&t@_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data.  */
+# define LT@&t@_DLSYM_CONST
+#else
+# define LT@&t@_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT@&t@_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS=conftstm.$ac_objext
+	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+    fi
+  else
+    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test yes = "$pipe_works"; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  AC_MSG_RESULT(failed)
+else
+  AC_MSG_RESULT(ok)
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+    [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+    [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1],
+    [Transform the output of nm into a list of symbols to manually relocate])
+_LT_DECL([global_symbol_to_c_name_address],
+    [lt_cv_sys_global_symbol_to_c_name_address], [1],
+    [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+    [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([nm_interface], [lt_cv_nm_interface], [1],
+    [The name lister interface])
+_LT_DECL([], [nm_file_list_spec], [1],
+    [Specify filename containing input files for $NM])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+m4_if([$1], [CXX], [
+  # C++ specific cases for pic, static, wl, etc.
+  if test yes = "$GXX"; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test ia64 = "$host_cpu"; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      case $host_os in
+      os2*)
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+	;;
+      esac
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+      ;;
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[[4-9]]*)
+	# All AIX code is PIC.
+	if test ia64 = "$host_cpu"; then
+	  # AIX 5 now supports IA64 processor
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	else
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+      mingw* | cygwin* | os2* | pw32* | cegcc*)
+	# This hack is so that the source file can tell whether it is being
+	# built for inclusion in a dll (and should export symbols for example).
+	m4_if([$1], [GCJ], [],
+	  [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+	;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly* | midnightbsd*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+	    if test ia64 != "$host_cpu"; then
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64, which still supported -KPIC.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+	    # IBM XL 8.0, 9.0 on PPC and BlueGene
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | $SED 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd* | netbsdelf*-gnu)
+	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+        ;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+	;;
+    esac
+  fi
+],
+[
+  if test yes = "$GCC"; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test ia64 = "$host_cpu"; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      case $host_os in
+      os2*)
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+      if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      if test ia64 = "$host_cpu"; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      else
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      case $cc_basename in
+      nagfor*)
+        # NAG Fortran compiler
+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      esac
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      case $host_os in
+      os2*)
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+	;;
+      esac
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC (with -KPIC) is the default.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+      case $cc_basename in
+      # old Intel for x86_64, which still supported -KPIC.
+      ecc*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # flang / f18. f95 an alias for gfortran or flang on Debian
+      flang* | f18* | f95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	;;
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      ccc*)
+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        # All Alpha code is PIC.
+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | $SED 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  ;;
+        *Intel*\ [[CF]]*Compiler*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	  ;;
+	*Portland\ Group*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # All OSF/1 code is PIC.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    rdos*)
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    solaris*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    unicos*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+
+    uts4*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *)
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+    esac
+  fi
+])
+case $host_os in
+  # For platforms that do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+    ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+    ;;
+esac
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+	[Additional compiler flags for building library objects])
+
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+	[How to pass a linker flag through the compiler])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+  $lt_tmp_static_flag,
+  [],
+  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+	[Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  case $host_os in
+  aix[[4-9]]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+    # Without the "-l" option, or with the "-B" option, AIX nm treats
+    # weak defined symbols like other global defined symbols, whereas
+    # GNU nm marks them as "W".
+    # While the 'weak' keyword is ignored in the Export File, we need
+    # it in the Import File for the 'aix-soname' feature, so we have
+    # to replace the "-B" option with "-P" for AIX nm.
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+    else
+      _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
+    ;;
+  cygwin* | mingw* | cegcc*)
+    case $cc_basename in
+    cl* | icl*)
+      _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+      ;;
+    *)
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+      ;;
+    esac
+    ;;
+  linux* | k*bsd*-gnu | gnu*)
+    _LT_TAGVAR(link_all_deplibs, $1)=no
+    ;;
+  *)
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+    ;;
+  esac
+], [
+  runpath_var=
+  _LT_TAGVAR(allow_undefined_flag, $1)=
+  _LT_TAGVAR(always_export_symbols, $1)=no
+  _LT_TAGVAR(archive_cmds, $1)=
+  _LT_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_TAGVAR(compiler_needs_object, $1)=no
+  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(hardcode_automatic, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(inherit_rpath, $1)=no
+  _LT_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_TAGVAR(module_cmds, $1)=
+  _LT_TAGVAR(module_expsym_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  _LT_TAGVAR(include_expsyms, $1)=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ' (' and ')$', so one must not match beginning or
+  # end of line.  Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+  # as well as any symbol that contains 'd'.
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ and ICC port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++ or Intel C++ Compiler.
+    if test yes != "$GCC"; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++ or ICC)
+    with_gnu_ld=yes
+    ;;
+  openbsd* | bitrig*)
+    with_gnu_ld=no
+    ;;
+  linux* | k*bsd*-gnu | gnu*)
+    _LT_TAGVAR(link_all_deplibs, $1)=no
+    ;;
+  esac
+
+  _LT_TAGVAR(ld_shlibs, $1)=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test yes = "$with_gnu_ld"; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test yes = "$lt_use_gnu_ld_interface"; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='$wl'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+    else
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v | $SED -e 's/([[^)]]\+)\s\+//' 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[[3-9]]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test ia64 != "$host_cpu"; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+      # as there is no search path for DLLs.
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=no
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file, use it as
+	# is; otherwise, prepend EXPORTS...
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+          cp $export_symbols $output_objdir/$soname.def;
+        else
+          echo EXPORTS > $output_objdir/$soname.def;
+          cat $export_symbols >> $output_objdir/$soname.def;
+        fi~
+        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    haiku*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    os2*)
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      shrext_cmds=.dll
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(file_list_spec, $1)='@'
+      ;;
+
+    interix[[3-9]]*)
+      _LT_TAGVAR(hardcode_direct, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test linux-dietlibc = "$host_os"; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test no = "$tmp_diet"
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+	  tmp_sharedflag='--shared' ;;
+        nagfor*)                        # NAGFOR 5.3
+          tmp_sharedflag='-Wl,-shared' ;;
+	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | $SED 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+
+        if test yes = "$supports_anon_versioning"; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+            cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+            echo "local: *; };" >> $output_objdir/$libname.ver~
+            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	tcc*)
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
+	  ;;
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test yes = "$supports_anon_versioning"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+              cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+              echo "local: *; };" >> $output_objdir/$libname.ver~
+              $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        _LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+
+    if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
+      runpath_var=
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	_LT_TAGVAR(hardcode_direct, $1)=unsupported
+      fi
+      ;;
+
+    aix[[4-9]]*)
+      if test ia64 = "$host_cpu"; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to GNU nm, but means don't demangle to AIX nm.
+	# Without the "-l" option, or with the "-B" option, AIX nm treats
+	# weak defined symbols like other global defined symbols, whereas
+	# GNU nm marks them as "W".
+	# While the 'weak' keyword is ignored in the Export File, we need
+	# it in the Import File for the 'aix-soname' feature, so we have
+	# to replace the "-B" option with "-P" for AIX nm.
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+	else
+	  _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# have runtime linking enabled, and use it for executables.
+	# For shared libraries, we enable/disable runtime linking
+	# depending on the kind of the shared library created -
+	# when "with_aix_soname,aix_use_runtimelinking" is:
+	# "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "aix,yes"  lib.so          shared, rtl:yes, for executables
+	#            lib.a           static archive
+	# "both,no"  lib.so.V(shr.o) shared, rtl:yes
+	#            lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a(lib.so.V) shared, rtl:no
+	# "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a           static archive
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	    # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	    # so we don't have lib.a shared libs to link our executables.
+	    # We have to force runtime linking in this case.
+	    aix_use_runtimelinking=yes
+	    LDFLAGS="$LDFLAGS -Wl,-brtl"
+	  fi
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      _LT_TAGVAR(archive_cmds, $1)=''
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+      case $with_aix_soname,$aix_use_runtimelinking in
+      aix,*) ;; # traditional, no import file
+      svr4,* | *,yes) # use import file
+	# The Import File defines what to hardcode.
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+	;;
+      esac
+
+      if test yes = "$GCC"; then
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`$CC -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test yes = "$aix_use_runtimelinking"; then
+	  shared_flag="$shared_flag "'$wl-G'
+	fi
+	# Need to ensure runtime linking is disabled for the traditional
+	# shared library, or the linker may eventually find shared libraries
+	# /with/ Import File - we do not want to mix them.
+	shared_flag_aix='-shared'
+	shared_flag_svr4='-shared $wl-G'
+      else
+	# not using gcc
+	if test ia64 = "$host_cpu"; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag='$wl-G'
+	  else
+	    shared_flag='$wl-bM:SRE'
+	  fi
+	  shared_flag_aix='$wl-bM:SRE'
+	  shared_flag_svr4='$wl-G'
+	fi
+      fi
+
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        _LT_SYS_MODULE_PATH_AIX([$1])
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+      else
+	if test ia64 = "$host_cpu"; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
+	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 _LT_SYS_MODULE_PATH_AIX([$1])
+	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+	  if test yes = "$with_gnu_ld"; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  fi
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	  # -brtl affects multiple linker settings, -berok does not and is overridden later
+	  compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+	  if test svr4 != "$with_aix_soname"; then
+	    # This is similar to how AIX traditionally builds its shared libraries.
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	  fi
+	  if test aix != "$with_aix_soname"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	  else
+	    # used by -dlpreopen to get the symbols
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	  fi
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[[45]]*)
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++ or Intel C++ Compiler.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl* | icl*)
+	# Native MSVC or ICC
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	_LT_TAGVAR(always_export_symbols, $1)=yes
+	_LT_TAGVAR(file_list_spec, $1)='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=.dll
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+            cp "$export_symbols" "$output_objdir/$soname.def";
+            echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+          else
+            $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+          fi~
+          $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+          linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+          lt_tool_outputfile="@TOOL_OUTPUT@"~
+          case $lt_outputfile in
+            *.exe|*.EXE) ;;
+            *)
+              lt_outputfile=$lt_outputfile.exe
+              lt_tool_outputfile=$lt_tool_outputfile.exe
+              ;;
+          esac~
+          if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+            $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+            $RM "$lt_outputfile.manifest";
+          fi'
+	;;
+      *)
+	# Assume MSVC and ICC wrapper
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=.dll
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	# FIXME: Should let the user specify the lib program.
+	_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+      _LT_DARWIN_LINKER_FEATURES($1)
+      ;;
+
+    dgux*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly* | midnightbsd*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    hpux9*)
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+      ;;
+
+    hpux10*)
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test no = "$with_gnu_ld"; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	m4_if($1, [], [
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  _LT_LINKER_OPTION([if $CC understands -b],
+	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+	  ;;
+	esac
+      fi
+      if test no = "$with_gnu_ld"; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  ;;
+	*)
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+	  [lt_cv_irix_exported_symbol],
+	  [save_LDFLAGS=$LDFLAGS
+	   LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
+	   AC_LINK_IFELSE(
+	     [AC_LANG_SOURCE(
+	        [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+			      [C++], [[int foo (void) { return 0; }]],
+			      [Fortran 77], [[
+      subroutine foo
+      end]],
+			      [Fortran], [[
+      subroutine foo
+      end]])])],
+	      [lt_cv_irix_exported_symbol=yes],
+	      [lt_cv_irix_exported_symbol=no])
+           LDFLAGS=$save_LDFLAGS])
+	if test yes = "$lt_cv_irix_exported_symbol"; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
+	fi
+	_LT_TAGVAR(link_all_deplibs, $1)=no
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(inherit_rpath, $1)=yes
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    linux*)
+      case $cc_basename in
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	_LT_TAGVAR(ld_shlibs, $1)=yes
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+	;;
+      esac
+      ;;
+
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    newsos6)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd* | bitrig*)
+      if test -f /usr/libexec/ld.so; then
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+	else
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	fi
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    os2*)
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      shrext_cmds=.dll
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(file_list_spec, $1)='@'
+      ;;
+
+    osf3*)
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+          $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    solaris*)
+      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+      if test yes = "$GCC"; then
+	wlarc='$wl'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+          $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+            $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='$wl'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+            $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      case $host_os in
+      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands '-z linker_flag'.  GCC discards it without '$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test yes = "$GCC"; then
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+	else
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    sunos4*)
+      if test sequent = "$host_vendor"; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+        ;;
+	motorola)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4.3*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	_LT_TAGVAR(ld_shlibs, $1)=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We CANNOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+      _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      _LT_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    esac
+
+    if test sni = "$host_vendor"; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+    [The commands to extract the exported symbol list from a shared archive])
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+  # Assume -lc should be added
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+  if test yes,yes = "$GCC,$enable_shared"; then
+    case $_LT_TAGVAR(archive_cmds, $1) in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+	[$RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+	  _LT_TAGVAR(allow_undefined_flag, $1)=
+	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+	  then
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	  else
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  fi
+	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+	])
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+    [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+    [enable_shared_with_static_runtimes], [0],
+    [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+    [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+    [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+    [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+    [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+    [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+    [Commands used to build a loadable module if different from building
+    a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+    [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+    [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+    [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+    [Flag to hardcode $libdir into a binary during linking.
+    This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+    [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+    [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
+    DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+    [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
+    DIR into the resulting binary and the resulting library dependency is
+    "absolute", i.e impossible to change by setting $shlibpath_var if the
+    library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+    [Set to "yes" if building a shared library automatically hardcodes DIR
+    into the library and all subsequent libraries and executables linked
+    against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+    [Set to yes if linker adds runtime paths of dependent libraries
+    to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+    [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [always_export_symbols], [0],
+    [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+    [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+    [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+    [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+    [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+    [Commands necessary for finishing linking programs])
+_LT_TAGDECL([], [file_list_spec], [1],
+    [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl    [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC=$CC
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_SYS_DYNAMIC_LINKER($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+  LT_SYS_DLOPEN_SELF
+  _LT_CMD_STRIPLIB
+
+  # Report what library types will actually be built
+  AC_MSG_CHECKING([if libtool supports shared libraries])
+  AC_MSG_RESULT([$can_build_shared])
+
+  AC_MSG_CHECKING([whether to build shared libraries])
+  test no = "$can_build_shared" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test yes = "$enable_shared" && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[[4-9]]*)
+    if test ia64 != "$host_cpu"; then
+      case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+      yes,aix,yes) ;;			# shared object as lib.so file only
+      yes,svr4,*) ;;			# shared object as lib.so archive member only
+      yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+      esac
+    fi
+    ;;
+  esac
+  AC_MSG_RESULT([$enable_shared])
+
+  AC_MSG_CHECKING([whether to build static libraries])
+  # Make sure either enable_shared or enable_static is yes.
+  test yes = "$enable_shared" || enable_static=yes
+  AC_MSG_RESULT([$enable_static])
+
+  _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC=$lt_save_CC
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test no != "$CXX" &&
+    ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+    (test g++ != "$CXX"))); then
+  AC_PROG_CXXCPP
+else
+  _lt_caught_CXX_error=yes
+fi
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_caught_CXX_error"; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_CFLAGS=$CFLAGS
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  CFLAGS=$CXXFLAGS
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test yes = "$GXX"; then
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+    else
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+    fi
+
+    if test yes = "$GXX"; then
+      # Set up default GNU C++ configuration
+
+      LT_PATH_LD
+
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test yes = "$with_gnu_ld"; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='$wl'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+        else
+          _LT_TAGVAR(whole_archive_flag_spec, $1)=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
+
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
+
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
+
+    # PORTME: fill in a description of your system's C++ link characteristics
+    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+    _LT_TAGVAR(ld_shlibs, $1)=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      aix[[4-9]]*)
+        if test ia64 = "$host_cpu"; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=
+        else
+          aix_use_runtimelinking=no
+
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # have runtime linking enabled, and use it for executables.
+          # For shared libraries, we enable/disable runtime linking
+          # depending on the kind of the shared library created -
+          # when "with_aix_soname,aix_use_runtimelinking" is:
+          # "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "aix,yes"  lib.so          shared, rtl:yes, for executables
+          #            lib.a           static archive
+          # "both,no"  lib.so.V(shr.o) shared, rtl:yes
+          #            lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a(lib.so.V) shared, rtl:no
+          # "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a           static archive
+          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	      # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	      # so we don't have lib.a shared libs to link our executables.
+	      # We have to force runtime linking in this case.
+	      aix_use_runtimelinking=yes
+	      LDFLAGS="$LDFLAGS -Wl,-brtl"
+	    fi
+	    ;;
+          esac
+
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
+
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        _LT_TAGVAR(archive_cmds, $1)=''
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+        case $with_aix_soname,$aix_use_runtimelinking in
+        aix,*) ;;	# no import file
+        svr4,* | *,yes) # use import file
+          # The Import File defines what to hardcode.
+          _LT_TAGVAR(hardcode_direct, $1)=no
+          _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+          ;;
+        esac
+
+        if test yes = "$GXX"; then
+          case $host_os in aix4.[[012]]|aix4.[[012]].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`$CC -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag=$shared_flag' $wl-G'
+	  fi
+	  # Need to ensure runtime linking is disabled for the traditional
+	  # shared library, or the linker may eventually find shared libraries
+	  # /with/ Import File - we do not want to mix them.
+	  shared_flag_aix='-shared'
+	  shared_flag_svr4='-shared $wl-G'
+        else
+          # not using gcc
+          if test ia64 = "$host_cpu"; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test yes = "$aix_use_runtimelinking"; then
+	      shared_flag='$wl-G'
+	    else
+	      shared_flag='$wl-bM:SRE'
+	    fi
+	    shared_flag_aix='$wl-bM:SRE'
+	    shared_flag_svr4='$wl-G'
+          fi
+        fi
+
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        _LT_TAGVAR(always_export_symbols, $1)=yes
+	if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          # The "-G" linker flag allows undefined symbols.
+          _LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          _LT_SYS_MODULE_PATH_AIX([$1])
+          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+        else
+          if test ia64 = "$host_cpu"; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
+	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    _LT_SYS_MODULE_PATH_AIX([$1])
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+	    _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+	    if test yes = "$with_gnu_ld"; then
+	      # We only use this code for GNU lds that support --whole-archive.
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
+	    else
+	      # Exported symbols can be pulled into shared objects from archives
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    fi
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	    # -brtl affects multiple linker settings, -berok does not and is overridden later
+	    compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+	    if test svr4 != "$with_aix_soname"; then
+	      # This is similar to how AIX traditionally builds its shared
+	      # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+	      _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	    fi
+	    if test aix != "$with_aix_soname"; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	    else
+	      # used by -dlpreopen to get the symbols
+	      _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	    fi
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
+          fi
+        fi
+        ;;
+
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	  ;;
+        esac
+        ;;
+
+      cygwin* | mingw* | pw32* | cegcc*)
+	case $GXX,$cc_basename in
+	,cl* | no,cl* | ,icl* | no,icl*)
+	  # Native MSVC or ICC
+	  # hardcode_libdir_flag_spec is actually meaningless, as there is
+	  # no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=yes
+	  _LT_TAGVAR(file_list_spec, $1)='@'
+	  # Tell ltmain to make .lib files, not .a files.
+	  libext=lib
+	  # Tell ltmain to make .dll files, not .so files.
+	  shrext_cmds=.dll
+	  # FIXME: Setting linknames here is a bad hack.
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+              cp "$export_symbols" "$output_objdir/$soname.def";
+              echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+            else
+              $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+            fi~
+            $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+            linknames='
+	  # The linker will not automatically build a static lib if we build a DLL.
+	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	  # Don't use ranlib
+	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+            lt_tool_outputfile="@TOOL_OUTPUT@"~
+            case $lt_outputfile in
+              *.exe|*.EXE) ;;
+              *)
+                lt_outputfile=$lt_outputfile.exe
+                lt_tool_outputfile=$lt_tool_outputfile.exe
+                ;;
+            esac~
+            func_to_tool_file "$lt_outputfile"~
+            if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+              $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+              $RM "$lt_outputfile.manifest";
+            fi'
+	  ;;
+	*)
+	  # g++
+	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+	  # as there is no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=no
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file, use it as
+	    # is; otherwise, prepend EXPORTS...
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+              cp $export_symbols $output_objdir/$soname.def;
+            else
+              echo EXPORTS > $output_objdir/$soname.def;
+              cat $export_symbols >> $output_objdir/$soname.def;
+            fi~
+            $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	  ;;
+	esac
+	;;
+      darwin* | rhapsody*)
+        _LT_DARWIN_LINKER_FEATURES($1)
+	;;
+
+      os2*)
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	shrext_cmds=.dll
+	_LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  prefix_cmds="$SED"~
+	  if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	    prefix_cmds="$prefix_cmds -e 1d";
+	  fi~
+	  prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	  cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	_LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	_LT_TAGVAR(file_list_spec, $1)='@'
+	;;
+
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      freebsd2.*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      freebsd-elf*)
+        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        ;;
+
+      freebsd* | dragonfly* | midnightbsd*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+        ;;
+
+      haiku*)
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        ;;
+
+      hpux9*)
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            _LT_TAGVAR(ld_shlibs, $1)=no
+            ;;
+          aCC*)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP " \-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            ;;
+          *)
+            if test yes = "$GXX"; then
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              _LT_TAGVAR(ld_shlibs, $1)=no
+            fi
+            ;;
+        esac
+        ;;
+
+      hpux10*|hpux11*)
+        if test no = "$with_gnu_ld"; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            _LT_TAGVAR(hardcode_direct, $1)=no
+            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+            ;;
+          *)
+            _LT_TAGVAR(hardcode_direct, $1)=yes
+            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP " \-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+          *)
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
+	        case $host_cpu in
+	          hppa*64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      interix[[3-9]]*)
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	      else
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
+	      fi
+	    fi
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+	    ;;
+        esac
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(inherit_rpath, $1)=yes
+        ;;
+
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+               rm -rf $tpldir~
+               $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+               compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+                $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+                $RANLIB $oldlib'
+	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 and above use weak symbols
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+	      ;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname  -o $lib $wl-retain-symbols-file $wl$export_symbols'
+
+	    runpath_var=LD_RUN_PATH
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    ;;
+	  xl* | mpixl* | bgxl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    if test yes = "$supports_anon_versioning"; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+                cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+                echo "local: *; };" >> $output_objdir/$libname.ver~
+                $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | $SED 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	      _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='func_echo_all'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      m88k*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	esac
+	;;
+
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
+
+      *nto* | *qnx*)
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+	;;
+
+      openbsd* | bitrig*)
+	if test -f /usr/libexec/ld.so; then
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=func_echo_all
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+		;;
+	      *)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+                  echo "-hidden">> $lib.exp~
+                  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+                  $RM $lib.exp'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+		;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+	  *)
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+	      case $host in
+	        osf3*)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+		  ;;
+	        *)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      psos*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      solaris*)
+        case $cc_basename in
+          CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+              $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	    case $host_os in
+	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands '-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+	    output_verbose_link_cmd='func_echo_all'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+
+	    # The C++ compiler must be used to create the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+                  $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
+	      else
+	        # g++ 2.7 appears to require '-G' NOT '-shared' on this
+	        # platform.
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+                  $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
+	      fi
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
+	      case $host_os in
+		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+		*)
+		  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      case $cc_basename in
+        CC*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
+
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We CANNOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+	_LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
+	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+	_LT_TAGVAR(link_all_deplibs, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
+	runpath_var='LD_RUN_PATH'
+
+	case $cc_basename in
+          CC*)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+              '"$_LT_TAGVAR(old_archive_cmds, $1)"
+	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+              '"$_LT_TAGVAR(reload_cmds, $1)"
+	    ;;
+	  *)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
+
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
+
+    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+    test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
+
+    _LT_TAGVAR(GCC, $1)=$GXX
+    _LT_TAGVAR(LD, $1)=$LD
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test yes != "$_lt_caught_CXX_error"
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+  case @S|@2 in
+  .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
+  *)  func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
+  esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
+])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case $prev$p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test x-L = "$p" ||
+          test x-R = "$p"; then
+	 prev=$p
+	 continue
+       fi
+
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
+       if test no = "$pre_test_object_deps_done"; then
+	 case $prev in
+	 -L | -R)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
+	   else
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+	   _LT_TAGVAR(postdeps, $1)=$prev$p
+	 else
+	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
+	 fi
+       fi
+       prev=
+       ;;
+
+    *.lto.$objext) ;; # Ignore GCC LTO objects
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test no = "$pre_test_object_deps_done"; then
+	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+	   _LT_TAGVAR(predep_objects, $1)=$p
+	 else
+	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+	 fi
+       else
+	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+	   _LT_TAGVAR(postdep_objects, $1)=$p
+	 else
+	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_TAGVAR(predep_objects,$1)=
+  _LT_TAGVAR(postdep_objects,$1)=
+  _LT_TAGVAR(postdeps,$1)=
+  ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+    [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+    [Dependencies to place before and after the objects being linked to
+    create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+    [The library search path used internally by the compiler when linking
+    a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test no = "$F77"; then
+  _lt_disable_F77=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_disable_F77"; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${F77-"f77"}
+  CFLAGS=$FFLAGS
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+  GCC=$G77
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test no = "$can_build_shared" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test yes = "$enable_shared" && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test ia64 != "$host_cpu"; then
+	  case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+	  yes,aix,yes) ;;		# shared object as lib.so file only
+	  yes,svr4,*) ;;		# shared object as lib.so archive member only
+	  yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+	  esac
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test yes = "$enable_shared" || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)=$G77
+    _LT_TAGVAR(LD, $1)=$LD
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_F77"
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test no = "$FC"; then
+  _lt_disable_FC=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_disable_FC"; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${FC-"f95"}
+  CFLAGS=$FCFLAGS
+  compiler=$CC
+  GCC=$ac_cv_fc_compiler_gnu
+
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test no = "$can_build_shared" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test yes = "$enable_shared" && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test ia64 != "$host_cpu"; then
+	  case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+	  yes,aix,yes) ;;		# shared object as lib.so file only
+	  yes,svr4,*) ;;		# shared object as lib.so archive member only
+	  yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+	  esac
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test yes = "$enable_shared" || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
+    _LT_TAGVAR(LD, $1)=$LD
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_FC"
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)=$LD
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)=$LD
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code=$lt_simple_compile_test_code
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+  :
+  _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+    [AC_CHECK_TOOL(GCJ, gcj,)
+      test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
+      AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
+
+# _LT_DECL_FILECMD
+# ----------------
+# Check for a file(cmd) program that can be used to detect file type and magic
+m4_defun([_LT_DECL_FILECMD],
+[AC_CHECK_TOOL([FILECMD], [file], [:])
+_LT_DECL([], [FILECMD], [1], [A file(cmd) program that detects file types])
+])# _LD_DECL_FILECMD
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+############################################################
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f "$lt_ac_sed" && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test 10 -lt "$lt_ac_count" && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test "$lt_ac_count" -gt "$lt_ac_max"; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine what file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+         [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+         [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
diff --git a/m4/ltoptions.m4 b/m4/ltoptions.m4
new file mode 100644
index 0000000..b0b5e9c
--- /dev/null
+++ b/m4/ltoptions.m4
@@ -0,0 +1,437 @@
+# Helper functions for option handling.                    -*- Autoconf -*-
+#
+#   Copyright (C) 2004-2005, 2007-2009, 2011-2019, 2021-2022 Free
+#   Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 8 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+        _LT_MANGLE_DEFUN([$1], [$2]),
+    [m4_warning([Unknown $1 option '$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+		      [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME.  If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+    [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+  dnl
+  dnl Simply set some default values (i.e off) if boolean options were not
+  dnl specified:
+  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+  ])
+  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+  ])
+  dnl
+  dnl If no reference was made to various pairs of opposing options, then
+  dnl we run the default mode handler for the pair.  For example, if neither
+  dnl 'shared' nor 'disable-shared' was passed, we enable building of shared
+  dnl archives by default:
+  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+		   [_LT_ENABLE_FAST_INSTALL])
+  _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4],
+		   [_LT_WITH_AIX_SONAME([aix])])
+  ])
+])# _LT_SET_OPTIONS
+
+
+## --------------------------------- ##
+## Macros to handle LT_INIT options. ##
+## --------------------------------- ##
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the 'dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS],      [1], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the 'win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the 'shared' and
+# 'disable-shared' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'.  If omitted, it defaults to 'yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for pkg in $enableval; do
+	IFS=$lt_save_ifs
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac],
+    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+    _LT_DECL([build_libtool_libs], [enable_shared], [0],
+	[Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the 'static' and
+# 'disable-static' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'.  If omitted, it defaults to 'yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for pkg in $enableval; do
+	IFS=$lt_save_ifs
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac],
+    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+    _LT_DECL([build_old_libs], [enable_static], [0],
+	[Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the 'fast-install'
+# and 'disable-fast-install' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'.  If omitted, it defaults to 'yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for pkg in $enableval; do
+	IFS=$lt_save_ifs
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac],
+    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+	 [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the 'fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the 'disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_AIX_SONAME([DEFAULT])
+# ----------------------------------
+# implement the --with-aix-soname flag, and support the `aix-soname=aix'
+# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT
+# is either `aix', `both' or `svr4'.  If omitted, it defaults to `aix'.
+m4_define([_LT_WITH_AIX_SONAME],
+[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl
+shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[[5-9]]*,yes)
+  AC_MSG_CHECKING([which variant of shared library versioning to provide])
+  AC_ARG_WITH([aix-soname],
+    [AS_HELP_STRING([--with-aix-soname=aix|svr4|both],
+      [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])],
+    [case $withval in
+    aix|svr4|both)
+      ;;
+    *)
+      AC_MSG_ERROR([Unknown argument to --with-aix-soname])
+      ;;
+    esac
+    lt_cv_with_aix_soname=$with_aix_soname],
+    [AC_CACHE_VAL([lt_cv_with_aix_soname],
+      [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT)
+    with_aix_soname=$lt_cv_with_aix_soname])
+  AC_MSG_RESULT([$with_aix_soname])
+  if test aix != "$with_aix_soname"; then
+    # For the AIX way of multilib, we name the shared archive member
+    # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+    # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+    # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+    # the AIX toolchain works better with OBJECT_MODE set (default 32).
+    if test 64 = "${OBJECT_MODE-32}"; then
+      shared_archive_member_spec=shr_64
+    else
+      shared_archive_member_spec=shr
+    fi
+  fi
+  ;;
+*)
+  with_aix_soname=aix
+  ;;
+esac
+
+_LT_DECL([], [shared_archive_member_spec], [0],
+    [Shared archive member basename, for filename based shared library versioning on AIX])dnl
+])# _LT_WITH_AIX_SONAME
+
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the 'pic-only' and 'no-pic'
+# LT_INIT options.
+# MODE is either 'yes' or 'no'.  If omitted, it defaults to 'both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+    [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for lt_pkg in $withval; do
+	IFS=$lt_save_ifs
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac],
+    [pic_mode=m4_default([$1], [default])])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the 'pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+## ----------------- ##
+## LTDL_INIT Options ##
+## ----------------- ##
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+		 [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+		 [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+		 [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+		 [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+		 [m4_define([_LTDL_TYPE], [convenience])])
diff --git a/m4/ltsugar.m4 b/m4/ltsugar.m4
new file mode 100644
index 0000000..902508b
--- /dev/null
+++ b/m4/ltsugar.m4
@@ -0,0 +1,124 @@
+# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
+#
+# Copyright (C) 2004-2005, 2007-2008, 2011-2019, 2021-2022 Free Software
+# Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+       [$#], [2], [[$2]],
+       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59, which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+       [$#], 1, [],
+       [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+	     [m4_foreach([_Lt_suffix],
+		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+		 [lt_append([$1], [$2], [$3])$4],
+		 [$5])],
+	  [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+	[$5],
+    [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+  [lt_join(m4_quote(m4_default([$4], [[, ]])),
+           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
diff --git a/m4/ltversion.m4 b/m4/ltversion.m4
new file mode 100644
index 0000000..b155d0a
--- /dev/null
+++ b/m4/ltversion.m4
@@ -0,0 +1,24 @@
+# ltversion.m4 -- version numbers			-*- Autoconf -*-
+#
+#   Copyright (C) 2004, 2011-2019, 2021-2022 Free Software Foundation,
+#   Inc.
+#   Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# @configure_input@
+
+# serial 4245 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.4.7])
+m4_define([LT_PACKAGE_REVISION], [2.4.7])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.4.7'
+macro_revision='2.4.7'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
diff --git a/m4/lt~obsolete.m4 b/m4/lt~obsolete.m4
new file mode 100644
index 0000000..0f7a875
--- /dev/null
+++ b/m4/lt~obsolete.m4
@@ -0,0 +1,99 @@
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
+#
+#   Copyright (C) 2004-2005, 2007, 2009, 2011-2019, 2021-2022 Free
+#   Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN),
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else.  This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
diff --git a/paper/.gitignore b/paper/.gitignore
deleted file mode 100644
index bbf8d5c..0000000
--- a/paper/.gitignore
+++ /dev/null
@@ -1,5 +0,0 @@
-*.aux
-*.bbl
-*.blg
-*.log
-bmc_article.pdf
diff --git a/paper/bmc_article.bib b/paper/bmc_article.bib
deleted file mode 100755
index 7c82320..0000000
--- a/paper/bmc_article.bib
+++ /dev/null
@@ -1,3623 +0,0 @@
-Automatically generated by Mendeley 1.5.2
-Any changes to this file will be lost if it is regenerated by Mendeley.
-
-@article{Yang2012,
-abstract = {Error Correction is important for most next-generation sequencing applications because highly accurate sequenced reads will likely lead to higher quality results. Many techniques for error correction of sequencing data from next-gen platforms have been developed in the recent years. However, compared with the fast development of sequencing technologies, there is a lack of standardized evaluation procedure for different error-correction methods, making it difficult to assess their relative merits and demerits. In this article, we provide a comprehensive review of many error-correction methods, and establish a common set of benchmark data and evaluation criteria to provide a comparative assessment. We present experimental results on quality, run-time, memory usage and scalability of several error-correction methods. Apart from providing explicit recommendations useful to practitioners, the review serves to identify the current state of the art and promising directions for future research. Availability: All error-correction programs used in this article are downloaded from hosting websites. The evaluation tool kit is publicly available at: http://aluru-sun.ece.iastate.edu/doku.php?id=ecr.},
-author = {Yang, X and Chockalingam, S P and Aluru, S},
-doi = {10.1093/bib/bbs015},
-file = {:home/gus/Documents/Mendeley Desktop/Yang, Chockalingam, Aluru\_2012\_A survey of error-correction methods for next-generation sequencing.pdf:pdf;:home/gus/Documents/Mendeley Desktop/Yang, Chockalingam, Aluru\_2012\_A survey of error-correction methods for next-generation sequencing(2).pdf:pdf},
-isbn = {1467546314774054},
-issn = {14675463},
-journal = {Briefings in Bioinformatics},
-keywords = {error correction,next generation sequencing,sequence analysis},
-pages = {bbs015--},
-publisher = {Oxford University Press},
-title = {{A survey of error-correction methods for next-generation sequencing}},
-url = {http://bib.oxfordjournals.org/cgi/doi/10.1093/bib/bbs015 http://bib.oxfordjournals.org/content/early/2012/04/06/bib.bbs015.short},
-year = {2012}
-}
-@article{Purcell2005,
-abstract = {We present the first non-blocking hashtable based on open addressing that provides the following benefits: it combines good cache locality, accessing a single cacheline if there are no collisions, with short straight-line code; it needs no storage overhead for pointers and memory allocator schemes, having instead an overhead of two words per bucket; it does not need to periodically reorganise or replicate the table; and it does not need garbage collection, even with arbitrary-sized keys. Open problems include resizing the table and replacing, rather than erasing, entries. The result is a highly-concurrent set algorithm that approaches or outperforms the best externally- chained implementations we tested, with fixed memory costs and no need to select or fine-tune a garbage collector or locking strategy.},
-author = {Purcell, Chris and Harris, Tim},
-file = {:home/gus/Documents/Mendeley Desktop/Purcell, Harris\_2005\_Non-blocking hatables with open addressing.pdf:pdf},
-journal = {University of Cambridge Technical Report},
-keywords = {hash table,lock free},
-number = {639},
-title = {{Non-blocking hatables with open addressing}},
-year = {2005}
-}
-@article{Hallett2004,
-author = {Hallett, M T},
-file = {:home/gus/Documents/Mendeley Desktop/Hallett\_2004\_Identifying Lateral Gene Transfers.pdf:pdf},
-keywords = {blocking loop},
-mendeley-tags = {blocking loop},
-pages = {1--29},
-title = {{Identifying Lateral Gene Transfers}},
-year = {2004}
-}
-@article{Wetzel2011,
-abstract = {Next-generation sequencing technologies allow genomes to be sequenced more quickly and less expensively than ever before. However, as sequencing technology has improved, the difficulty of de novo genome assembly has increased, due in large part to the shorter reads generated by the new technologies. The use of mated sequences (referred to as mate-pairs) is a standard means of disambiguating assemblies to obtain a more complete picture of the genome without resorting to manual finishing. Here, we examine the effectiveness of mate-pair information in resolving repeated sequences in the DNA (a paramount issue to overcome). While it has been empirically accepted that mate-pairs improve assemblies, and a variety of assemblers use mate-pairs in the context of repeat resolution, the effectiveness of mate-pairs in this context has not been systematically evaluated in previous literature.},
-author = {Wetzel, Joshua and Kingsford, Carl and Pop, Mihai},
-doi = {10.1186/1471-2105-12-95},
-file = {:home/gus/Documents/Mendeley Desktop/Wetzel, Kingsford, Pop\_2011\_Assessing the benefits of using mate-pairs to resolve repeats in de novo short-read prokaryotic assemblies.pdf:pdf},
-issn = {1471-2105},
-journal = {BMC bioinformatics},
-keywords = {Bacteria,Bacteria: classification,Bacteria: genetics,Bacterial,DNA,DNA: methods,Genome, Bacterial,High-Throughput Nucleotide Sequencing,High-Throughput Nucleotide Sequencing: methods,Sequence Analysis, DNA,Sequence Analysis, DNA: methods},
-month = jan,
-number = {1},
-pages = {95},
-pmid = {21486487},
-title = {{Assessing the benefits of using mate-pairs to resolve repeats in de novo short-read prokaryotic assemblies.}},
-url = {http://www.biomedcentral.com/1471-2105/12/95},
-volume = {12},
-year = {2011}
-}
-@article{Panda2010,
-annote = {10.1038/nature08696},
-author = {Li, Ruiqiang and Fan, Wei and Tian, Geng and Zhu, Hongmei and He, Lin and Cai, Jing and Huang, Quanfei and Cai, Qingle and Li, Bo and Bai, Yinqi and Zhang, Zhihe and Zhang, Yaping and Wang, Wen and Li, Jun and Wei, Fuwen and Li, Heng and Jian, Min and Li, Jianwen and Zhang, Zhaolei and Nielsen, Rasmus and Li, Dawei and Gu, Wanjun and Yang, Zhentao and Xuan, Zhaoling and Ryder, Oliver A and Leung, Frederick Chi-Ching and Zhou, Yan and Cao, Jianjun and Sun, Xiao and Fu, Yonggui and Fang, Xiaodong and Guo, Xiaosen and Wang, Bo and Hou, Rong and Shen, Fujun and Mu, Bo and Ni, Peixiang and Lin, Runmao and Qian, Wubin and Wang, Guodong and Yu, Chang and Nie, Wenhui and Wang, Jinhuan and Wu, Zhigang and Liang, Huiqing and Min, Jiumeng and Wu, Qi and Cheng, Shifeng and Ruan, Jue and Wang, Mingwei and Shi, Zhongbin and Wen, Ming and Liu, Binghang and Ren, Xiaoli and Zheng, Huisong and Dong, Dong and Cook, Kathleen and Shan, Gao and Zhang, Hao and Kosiol, Carolin and Xie, Xueying and Lu, Zuhong and Zheng, Hancheng and Li, Yingrui and Steiner, Cynthia C and Lam, Tommy Tsan-Yuk and Lin, Siyuan and Zhang, Qinghui and Li, Guoqing and Tian, Jing and Gong, Timing and Liu, Hongde and Zhang, Dejin and Fang, Lin and Ye, Chen and Zhang, Juanbin and Hu, Wenbo and Xu, Anlong and Ren, Yuanyuan and Zhang, Guojie and Bruford, Michael W and Li, Qibin and Ma, Lijia and Guo, Yiran and An, Na and Hu, Yujie and Zheng, Yang and Shi, Yongyong and Li, Zhiqiang and Liu, Qing and Chen, Yanling and Zhao, Jing and Qu, Ning and Zhao, Shancen and Tian, Feng and Wang, Xiaoling and Wang, Haiyin and Xu, Lizhi and Liu, Xiao and Vinar, Tomas and Wang, Yajun and Lam, Tak-Wah and Yiu, Siu-Ming and Liu, Shiping and Zhang, Hemin and Li, Desheng and Huang, Yan and Wang, Xia and Yang, Guohua and Jiang, Zhi and Wang, Junyi and Qin, Nan and Li, Li and Li, Jingxiang and Bolund, Lars and Kristiansen, Karsten and Wong, Gane Ka-Shu and Olson, Maynard and Zhang, Xiuqing and Li, Songgang and Yang, Huanming and Wang, Jian and Wang, Jun},
-doi = {http://dx.doi.org/10.1038/nature08696},
-issn = {0028-0836},
-journal = {Nature},
-number = {7279},
-pages = {311--317},
-publisher = {Macmillan Publishers Limited. All rights reserved},
-title = {{The sequence and de novo assembly of the giant panda genome}},
-volume = {463},
-year = {2010}
-}
-@article{Gibbs2012,
-author = {Gibbs, Richard A and Rogers, Jeffrey},
-doi = {10.1038/483164a},
-file = {:home/gus/Documents/Mendeley Desktop/Gibbs, Rogers\_2012\_Genomics Gorilla gorilla gorilla.pdf:pdf},
-issn = {1476-4687},
-journal = {Nature},
-month = mar,
-number = {7388},
-pages = {164--5},
-pmid = {22398552},
-publisher = {Nature Publishing Group, a division of Macmillan Publishers Limited. All Rights Reserved.},
-shorttitle = {Nature},
-title = {{Genomics: Gorilla gorilla gorilla.}},
-url = {http://dx.doi.org/10.1038/483164a},
-volume = {483},
-year = {2012}
-}
-@article{Manber1990,
-author = {Manber, Udi and Myers, Gene},
-file = {:home/gus/Documents/Mendeley Desktop/Manber, Myers\_1990\_Suffix arrays a new method for on-line string searches.pdf:pdf},
-isbn = {0-89871-251-3},
-month = jan,
-pages = {319--327},
-title = {{Suffix arrays: a new method for on-line string searches}},
-url = {http://dl.acm.org/citation.cfm?id=320176.320218},
-year = {1990}
-}
-@article{Kim:2007uq,
-abstract = {One of the main goals in genome sequencing projects is to determine a haploid consensus sequence even when clone libraries are constructed from homologous chromosomes. However, it has been noticed that haplotypes can be inferred from genome assemblies by investigating phase conservation in sequenced reads. In this study, we seek to infer haplotypes, a diploid consensus sequence, from the genome assembly of an organism, Ciona intestinalis. The Ciona intestinalis genome is an ideal resource from which haplotypes can be inferred because of the high polymorphism rate (1.2\%). The haplotype estimation scheme consists of polymorphism detection and phase estimation. The core step of our method is a Gibbs sampling procedure. The mate-pair information from two-end sequenced clone inserts is exploited to provide long-range continuity. We estimate the polymorphism rate of Ciona intestinalis to be 1.2\% and 1.5\%, according to two different polymorphism counting schemes. The distribution of heterozygosity number is well fit by a compound Poisson distribution. The N50 length of haplotype segments is 37.9 kb in our assembly, while the N50 scaffold length of the Ciona intestinalis assembly is 190 kb. We also infer diploid gene sequences from haplotype segments. According to our reconstruction, 85.4\% of predicted gene sequences are continuously covered by single haplotype segments. Our results indicate 97\% accuracy in haplotype estimation, based on a simulated data set. We conduct a comparative analysis with Ciona savignyi, and discover interesting patterns of conserved DNA elements in chordates.},
-author = {Kim, Jong Hyun and Waterman, Michael S and Li, Lei M},
-doi = {10.1101/gr.5894107},
-file = {:home/gus/Documents/Mendeley Desktop/Kim, Waterman, Li\_2007\_Diploid genome reconstruction of Ciona intestinalis and comparative analysis with Ciona savignyi.pdf:pdf},
-journal = {Genome Res},
-month = jul,
-number = {7},
-pages = {1101--1110},
-pmid = {17567986},
-title = {{Diploid genome reconstruction of Ciona intestinalis and comparative analysis with Ciona savignyi}},
-volume = {17},
-year = {2007}
-}
-@article{Ilie2011b,
-abstract = {High-throughput sequencing technologies produce very large amounts of data and sequencing errors constitute one of the major problems in analyzing such data. Current algorithms for correcting these errors are not very accurate and do not automatically adapt to the given data.},
-author = {Ilie, Lucian and Fazayeli, Farideh and Ilie, Silvana},
-file = {:home/gus/Documents/Mendeley Desktop/Ilie, Fazayeli, Ilie\_2011\_HiTEC accurate error correction in high-throughput sequencing data.pdf:pdf},
-institution = {Department of Computer Science, University of Western Ontario, London, ON N6A 5B7, Canada. ilie@csd.uwo.ca},
-journal = {Bioinformatics},
-number = {3},
-pages = {295--302},
-pmid = {21115437},
-title = {{HiTEC: accurate error correction in high-throughput sequencing data.}},
-url = {http://www.ncbi.nlm.nih.gov/pubmed/21115437 http://bioinformatics.oxfordjournals.org/content/27/3/295.short},
-volume = {27},
-year = {2011}
-}
-@article{Florea:2010kx,
-author = {Florea, Liliana and Souvorov, Alexander and Salzberg, Steven},
-doi = {10.1186/gb-2010-11-s1-p13},
-issn = {1465-6906},
-journal = {Genome Biology},
-number = {Suppl 1},
-pages = {P13},
-title = {{Genes and genomes, an imperfect world: comparison of gene annotations of two Bos taurus draft assemblies}},
-url = {http://genomebiology.com/2010/11/S1/P13},
-volume = {11},
-year = {2010}
-}
-@article{Stranneheim2010,
-abstract = {New generation sequencing technologies producing increasingly complex datasets demand new efficient and specialized sequence analysis algorithms. Often, it is only the 'novel' sequences in a complex dataset that are of interest and the superfluous sequences need to be removed.},
-author = {Stranneheim, Henrik and K\"{a}ller, Max and Allander, Tobias and Andersson, Bj\"{o}rn and Arvestad, Lars and Lundeberg, Joakim},
-doi = {10.1093/bioinformatics/btq230},
-file = {:home/gus/Documents/Mendeley Desktop/Stranneheim et al.\_2010\_Classification of DNA sequences using Bloom filters.pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-keywords = {Algorithms,DNA,Genome,Humans,Metagenome,Mitochondrial,Respiratory System,Respiratory System: microbiology,Sensitivity and Specificity,Sequence Analysis},
-month = jul,
-number = {13},
-pages = {1595--600},
-pmid = {20472541},
-title = {{Classification of DNA sequences using Bloom filters.}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/26/13/1595},
-volume = {26},
-year = {2010}
-}
-@article{Vinson:2005kx,
-abstract = {Whole-genome assembly is now used routinely to obtain high-quality draft sequence for the genomes of species with low levels of polymorphism. However, genome assembly remains extremely challenging for highly polymorphic species. The difficulty arises because two divergent haplotypes are sequenced together, making it difficult to distinguish alleles at the same locus from paralogs at different loci. We present here a method for assembling highly polymorphic diploid genomes that involves assembling the two haplotypes separately and then merging them to obtain a reference sequence. Our method was developed to assemble the genome of the sea squirt Ciona savignyi, which was sequenced to a depth of 12.7 x from a single wild individual. By comparing finished clones of the two haplotypes we determined that the sequenced individual had an extremely high heterozygosity rate, averaging 4.6\% with significant regional variation and rearrangements at all physical scales. Applied to these data, our method produced a reference assembly covering 157 Mb, with N50 contig and scaffold sizes of 47 kb and 989 kb, respectively. Alignment of ESTs indicates that 88\% of loci are present at least once and 81\% exactly once in the reference assembly. Our method represented loci in a single copy more reliably and achieved greater contiguity than a conventional whole-genome assembly method.},
-author = {Vinson, Jade P and Jaffe, David B and O'Neill, Keith and Karlsson, Elinor K and Stange-Thomann, Nicole and Anderson, Scott and Mesirov, Jill P and Satoh, Nori and Satou, Yutaka and Nusbaum, Chad and Birren, Bruce and Galagan, James E and Lander, Eric S},
-doi = {10.1101/gr.3722605},
-journal = {Genome Res},
-month = aug,
-number = {8},
-pages = {1127--1135},
-pmid = {16077012},
-title = {{Assembly of polymorphic genomes: algorithms and application to Ciona savignyi}},
-volume = {15},
-year = {2005}
-}
-@misc{TheMendeleySupportTeam2011a,
-abstract = {A quick introduction to Mendeley. Learn how Mendeley creates your personal digital library, how to organize and annotate documents, how to collaborate and share with colleagues, and how to generate citations and bibliographies.},
-address = {London},
-author = {{The Mendeley Support Team}},
-booktitle = {Mendeley Desktop},
-file = {:home/gus/Documents/Mendeley Desktop/The Mendeley Support Team\_2011\_Getting Started with Mendeley.pdf:pdf},
-keywords = {Mendeley,how-to,user manual},
-pages = {1--16},
-publisher = {Mendeley Ltd.},
-title = {{Getting Started with Mendeley}},
-url = {http://www.mendeley.com},
-year = {2011}
-}
-@article{Salzberg2011,
-abstract = {New sequencing technology has dramatically altered the landscape of whole-genome sequencing, allowing scientists to initiate numerous projects to decode the genomes of previously unsequenced organisms. The lowest-cost technology can generate deep coverage of most species, including mammals, in just a few days. The sequence data generated by one of these projects consists of millions or billions of short DNA sequences (reads) that range from 50-150 nucleotides in length. These sequences must then be assembled de novo before most genome analyses can begin. Unfortunately, genome assembly remains a very difficult problem, made more difficult by shorter reads and unreliable long-range linking information. In this study, we evaluated several of the leading de novo assembly algorithms on four different short-read data sets, all generated by Illumina sequencers. Our results describe the relative performance of the different assemblers as well as other significant differences in assembly difficulty that appear to be inherent in the genomes themselves. Three overarching conclusions are apparent: first, that data quality, rather than the assembler itself, has a dramatic affect on the quality of an assembled genome; second, that the degree of contiguity of an assembly varies enormously among different assemblers and different genomes; and third, that the correctness of an assembly also varies widely, and is not well correlated with statistics on contiguity. In order to enable others to replicate our results, all of our data and methods are freely available, as are all assemblers used in this study.},
-author = {Salzberg, S. L. and Phillippy, A. M. and Zimin, A. V. and Puiu, D. and Magoc, T. and Koren, S. and Treangen, T. and Schatz, M. C. and Delcher, A. L. and Roberts, M. and Marcais, G. and Pop, M. and Yorke, J. A.},
-doi = {10.1101/gr.131383.111},
-file = {:home/gus/Documents/Mendeley Desktop/Salzberg et al.\_2011\_GAGE A critical evaluation of genome assemblies and assembly algorithms(2).pdf:pdf},
-issn = {1088-9051},
-journal = {Genome Research},
-month = dec,
-pages = {gr.131383.111--},
-title = {{GAGE: A critical evaluation of genome assemblies and assembly algorithms}},
-url = {http://genome.cshlp.org/cgi/content/abstract/gr.131383.111v1},
-year = {2011}
-}
-@inproceedings{Kanevsky,
-abstract = {Given a graph G with n vertices and m edges, a k-connectivity query for vertices v' and v" of G asks whether there exist k disjoint paths between v' and v". The authors consider the problem of performing k-connectivity queries for k\&les;4. First, they present a static data structure that answers such queries in O(1) time. Next, they consider the problem of performing queries intermixed with online updates that insert vertices and edges. For triconnected graphs they give a dynamic data structure that supports queries and updates in time O($\alpha$( l,n)) amortized, where n is the current number of vertices of the graph and l is the total number of operations performed ($\alpha$(l, n) denotes the slowly growing Ackermann function inverse). For general graphs, a sequence of l operations takes total time O(n log n +l). All of the above data structures use space O(n), proportional to the number of vertices of the graph. The results also yield an efficient algorithm for testing whether graph G is four-connected that runs in O(n$\alpha$(n, n)+m) time using O(n+m) space},
-author = {Kanevsky, A. and Tamassia, R. and {Di Battista}, G. and Chen, J.},
-booktitle = {[1991] Proceedings 32nd Annual Symposium of Foundations of Computer Science},
-doi = {10.1109/SFCS.1991.185451},
-isbn = {0-8186-2445-0},
-pages = {793--801},
-publisher = {IEEE Comput. Soc. Press},
-title = {{On-line maintenance of the four-connected components of a graph}},
-url = {http://ieeexplore.ieee.org/xpl/freeabs\_all.jsp?arnumber=185451}
-}
-@article{Jin,
-abstract = {Phylogenies-the evolutionary histories of groups of organisms-play a major role in representing the interrelationships among biological entities. Many methods for reconstructing and studying such phylogenies have been proposed, almost all of which assume that the underlying history of a given set of species can be represented by a binary tree. Although many biological processes can be effectively modeled and summarized in this fashion, others cannot: recombination, hybrid speciation, and horizontal gene transfer result in networks of relationships rather than trees of relationships. In previous works, we formulated a maximum parsimony (MP) criterion for reconstructing and evaluating phylogenetic networks, and demonstrated its quality on biological as well as synthetic data sets. In this paper, we provide further theoretical results as well as a very fast heuristic algorithm for the MP criterion of phylogenetic networks. In particular, we provide a novel combinatorial definition of phylogenetic networks in terms of "forbidden cycles," and provide detailed hardness and hardness of approximation proofs for the "small" MP problem. We demonstrate the performance of our heuristic in terms of time and accuracy on both biological and synthetic data sets. Finally, we explain the difference between our model and a similar one formulated by Nguyen et al., and describe the implications of this difference on the hardness and approximation results.},
-author = {Jin, Guohua and Nakhleh, Luay and Snir, Sagi and Tuller, Tamir},
-doi = {10.1109/TCBB.2008.119},
-file = {:home/gus/Documents/Mendeley Desktop/Jin et al.\_Unknown\_Parsimony score of phylogenetic networks hardness results and a linear-time heuristic.pdf:pdf},
-issn = {1557-9964},
-journal = {IEEE/ACM transactions on computational biology and bioinformatics / IEEE, ACM},
-keywords = {Algorithms,Archaea,Archaea: genetics,Cyclooxygenase 2,Cyclooxygenase 2: genetics,Genetic,Models,Phylogeny,Plant Proteins,Plant Proteins: genetics,Plants,Plants: genetics,Ribosomal Proteins,Ribosomal Proteins: genetics,blocking loop},
-mendeley-tags = {blocking loop},
-number = {3},
-pages = {495--505},
-pmid = {19644176},
-title = {{Parsimony score of phylogenetic networks: hardness results and a linear-time heuristic.}},
-url = {http://ieeexplore.ieee.org/xpl/freeabs\_all.jsp?arnumber=4668337},
-volume = {6}
-}
-@article{Schatz2010,
-abstract = {Second-generation sequencing technology can now be used to sequence an entire human genome in a matter of days and at low cost. Sequence read lengths, initially very short, have rapidly increased since the technology first appeared, and we now are seeing a growing number of efforts to sequence large genomes de novo from these short reads. In this Perspective, we describe the issues associated with short-read assembly, the different types of data produced by second-gen sequencers, and the latest assembly algorithms designed for these data. We also review the genomes that have been assembled recently from short reads and make recommendations for sequencing strategies that will yield a high-quality assembly.},
-author = {Schatz, Michael C and Delcher, Arthur L and Salzberg, Steven L},
-doi = {10.1101/gr.101360.109},
-file = {:home/gus/Documents/Mendeley Desktop/Schatz, Delcher, Salzberg\_2010\_Assembly of large genomes using second-generation sequencing.pdf:pdf},
-issn = {1549-5469},
-journal = {Genome research},
-keywords = {Algorithms,Base Sequence,Genome, Human,Genomics,Genomics: methods,Humans,Sequence Analysis, DNA,Sequence Analysis, DNA: methods},
-month = sep,
-number = {9},
-pages = {1165--73},
-pmid = {20508146},
-title = {{Assembly of large genomes using second-generation sequencing.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2928494\&tool=pmcentrez\&rendertype=abstract},
-volume = {20},
-year = {2010}
-}
-@article{Zerbino2009a,
-abstract = {Despite the short length of their reads, micro-read sequencing technologies have shown their usefulness for de novo sequencing. However, especially in eukaryotic genomes, complex repeat patterns are an obstacle to large assemblies.},
-author = {Zerbino, Daniel R and McEwen, Gayle K and Margulies, Elliott H and Birney, Ewan},
-doi = {10.1371/journal.pone.0008407},
-file = {:home/gus/Documents/Mendeley Desktop/Zerbino, McEwen\_2009\_Pebble and rock band heuristic resolution of repeats and scaffolding in the velvet short-read de novo assembler.pdf:pdf},
-issn = {1932-6203},
-journal = {PloS one},
-keywords = {Algorithms,Animals,Chromosomes, Artificial, Bacterial,Chromosomes, Artificial, Bacterial: genetics,Computer Simulation,Ferrets,Ferrets: genetics,Pseudomonas syringae,Pseudomonas syringae: genetics,Repetitive Sequences, Nucleic Acid,Repetitive Sequences, Nucleic Acid: genetics,Sequence Analysis, DNA,Sequence Analysis, DNA: instrumentation,Sequence Analysis, DNA: methods},
-month = jan,
-number = {12},
-pages = {e8407},
-pmid = {20027311},
-title = {{Pebble and rock band: heuristic resolution of repeats and scaffolding in the velvet short-read de novo assembler.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2793427\&tool=pmcentrez\&rendertype=abstract},
-volume = {4},
-year = {2009}
-}
-@article{Lander1988,
-abstract = {Results from physical mapping projects have recently been reported for the genomes of Escherichia coli, Saccharomyces cerevisiae, and Caenorhabditis elegans, and similar projects are currently being planned for other organisms. In such projects, the physical map is assembled by first "fingerprinting" a large number of clones chosen at random from a recombinant library and then inferring overlaps between clones with sufficiently similar fingerprints. Although the basic approach is the same, there are many possible choices for the fingerprint used to characterize the clones and the rules for declaring overlap. In this paper, we derive simple formulas showing how the progress of a physical mapping project is affected by the nature of the fingerprinting scheme. Using these formulas, we discuss the analytic considerations involved in selecting an appropriate fingerprinting scheme for a particular project.},
-author = {Lander, E S and Waterman, M S},
-file = {:home/gus/Documents/Mendeley Desktop/Lander, Waterman\_1988\_Genomic mapping by fingerprinting random clones a mathematical analysis.pdf:pdf},
-issn = {0888-7543},
-journal = {Genomics},
-keywords = {Animals,Caenorhabditis,Caenorhabditis: genetics,Chromosome Mapping,Cloning,Escherichia coli,Escherichia coli: genetics,Mathematics,Molecular,Nucleotide Mapping,Saccharomyces cerevisiae,Saccharomyces cerevisiae: genetics},
-month = apr,
-number = {3},
-pages = {231--9},
-pmid = {3294162},
-title = {{Genomic mapping by fingerprinting random clones: a mathematical analysis.}},
-url = {http://www.ncbi.nlm.nih.gov/pubmed/3294162},
-volume = {2},
-year = {1988}
-}
-@article{Miller1998,
-author = {Miller, Peter},
-file = {:home/gus/Documents/Mendeley Desktop/Miller\_1998\_Recursive make considered harmful.pdf:pdf},
-journal = {AUUGN Journal of AUUG Inc},
-number = {1},
-pages = {14--25},
-title = {{Recursive make considered harmful}},
-url = {http://www.unix-ag.uni-kl.de/svn/kbibtex/kbibtex/tags/release-0.1/admin/unsermake/doc/auug97.pdf},
-volume = {19},
-year = {1998}
-}
-@article{Manber1990,
-annote = {        From Duplicate 1 (                           Suffix arrays: a new method for on-line string searches                         - Manber, Udi; Myers, Gene )
-                
-        
-        
-      },
-author = {Manber, Udi and Myers, Gene},
-file = {:home/gus/Documents/Mendeley Desktop/Manber, Myers\_1990\_Suffix arrays a new method for on-line string searches(2).pdf:pdf;:home/gus/Documents/Mendeley Desktop/Manber, Myers\_1990\_Suffix arrays a new method for on-line string searches.pdf:pdf},
-isbn = {0-89871-251-3},
-journal = {Proceedings of the first annual ACM-SIAM \ldots},
-month = jan,
-pages = {319--327},
-title = {{Suffix arrays: a new method for on-line string searches}},
-url = {http://portal.acm.org/citation.cfm?id=320218 http://dl.acm.org/citation.cfm?id=320176.320218},
-year = {1990}
-}
-@article{Rhrissorrakrai2011,
-abstract = {ABSTRACT: BACKGROUND: Graphical models of network associations are useful for both visualizing and integrating multiple types of association data. Identifying modules, or groups of functionally related gene products, is an important challenge in analyzing biological networks. However, existing tools to identify modules are insufficient when applied to dense networks of experimentally derived interaction data. To address this problem, we have developed an agglomerative clustering method that is able to identify highly modular sets of gene products within highly interconnected molecular interaction networks. RESULTS: MINE outperforms MCODE, CFinder, NEMO, SPICi, and MCL in identifying non-exclusive, high modularity clusters when applied to the C. elegans protein-protein interaction network. The algorithm generally achieves superior geometric accuracy and modularity for annotated functional categories. In comparison with the most closely related algorithm, MCODE, the top clusters identified by MINE are consistently of higher density and MINE is less likely to designate overlapping modules as a single unit. MINE offers a high level of granularity with a small number of adjustable parameters, enabling users to fine-tune cluster results for input networks with differing topological properties. CONCLUSIONS: MINE was created in response to the challenge of discovering high quality modules of gene products within highly interconnected biological networks. The algorithm allows a high degree of flexibility and user-customisation of results with few adjustable parameters. MINE outperforms several popular clustering algorithms in identifying modules with high modularity and obtains good overall recall and precision of functional annotations in protein-protein interaction networks from both S. cerevisiae and C. elegans.},
-author = {Rhrissorrakrai, Kahn and Gunsalus, Kristin C},
-doi = {10.1186/1471-2105-12-192},
-issn = {1471-2105},
-journal = {BMC bioinformatics},
-month = may,
-number = {1},
-pages = {192},
-pmid = {21605434},
-title = {{MINE: Module Identification in NEtworks.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=3123237\&tool=pmcentrez\&rendertype=abstract},
-volume = {12},
-year = {2011}
-}
-@article{Yang2011,
-abstract = {High-throughput short read sequencing is revolutionizing genomics and systems biology research by enabling cost-effective deep coverage sequencing of genomes and transcriptomes. Error detection and correction are crucial to many short read sequencing applications including de novo genome sequencing, genome resequencing, and digital gene expression analysis. Short read error detection is typically carried out by counting the observed frequencies of kmers in reads and validating those with frequencies exceeding a threshold. In case of genomes with high repeat content, an erroneous kmer may be frequently observed if it has few nucleotide differences with valid kmers with multiple occurrences in the genome. Error detection and correction were mostly applied to genomes with low repeat content and this remains a challenging problem for genomes with high repeat content.},
-author = {Yang, Xiao and Aluru, Srinivas and Dorman, Karin S},
-doi = {10.1186/1471-2105-12-S1-S52},
-file = {:home/gus/Documents/Mendeley Desktop//Yang, Aluru, Dorman\_2011\_Repeat-aware modeling and correction of short read errors.pdf:pdf},
-issn = {1471-2105},
-journal = {BMC bioinformatics},
-keywords = {Algorithms,Computational Biology,Computational Biology: methods,Genomics,Genomics: methods,High-Throughput Nucleotide Sequencing,High-Throughput Nucleotide Sequencing: methods,Likelihood Functions,Models,Software,Statistical},
-month = jan,
-number = {Suppl 1},
-pages = {S52},
-pmid = {21342585},
-title = {{Repeat-aware modeling and correction of short read errors.}},
-url = {http://www.biomedcentral.com/1471-2105/12/S1/S52},
-volume = {12 Suppl 1},
-year = {2011}
-}
-@inproceedings{Ortiz2010,
-abstract = {Popular sorting algorithms do not translate well into hardware implementations. Instead, hardware-based solutions like sorting networks and linear sorters exploit parallelism to increase sorting efficiency. Linear sorters, built from identical nodes with simple control, have less area and latency than sorting networks, but they are limited in their throughput. We present a system composed of multiple linear sorters acting in parallel in order to increase throughput. Interleaving is used to increase bandwidth and allow sorting of multiple values per clock cycle, and the amount of interleaving and depth of the linear sorters can be adapted to suit specific applications. Implementation of this system into a Field Programmable Gate Array (FPGA) results in a speedup of 68 compared to quicksort running in a MicroBlaze processor.},
-author = {Ortiz, Jorge and Andrews, David},
-booktitle = {2010 IEEE International Symposium on Parallel \& Distributed Processing, Workshops and Phd Forum (IPDPSW)},
-doi = {10.1109/IPDPSW.2010.5470730},
-file = {:home/gus/Documents/Mendeley Desktop/Ortiz, Andrews\_2010\_A configurable high-throughput linear sorter system.pdf:pdf},
-isbn = {978-1-4244-6533-0},
-month = apr,
-pages = {1--8},
-publisher = {IEEE},
-title = {{A configurable high-throughput linear sorter system}},
-url = {http://ieeexplore.ieee.org/lpdocs/epic03/wrapper.htm?arnumber=5470730},
-year = {2010}
-}
-@article{dohm2008substantial,
-author = {Dohm, J.C. and Lottaz, C. and Borodina, T. and Himmelbauer, H.},
-file = {:home/gus/Documents/Mendeley Desktop/Dohm et al.\_2008\_Substantial biases in ultra-short read data sets from high-throughput DNA sequencing.pdf:pdf},
-journal = {Nucleic acids research},
-number = {16},
-pages = {e105},
-publisher = {Oxford Univ Press},
-title = {{Substantial biases in ultra-short read data sets from high-throughput DNA sequencing}},
-url = {http://nar.oxfordjournals.org/content/36/16/e105.short},
-volume = {36},
-year = {2008}
-}
-@article{Zerbino2008,
-abstract = {We have developed a new set of algorithms, collectively called "Velvet," to manipulate de Bruijn graphs for genomic sequence assembly. A de Bruijn graph is a compact representation based on short words (k-mers) that is ideal for high coverage, very short read (25-50 bp) data sets. Applying Velvet to very short reads and paired-ends information only, one can produce contigs of significant length, up to 50-kb N50 length in simulations of prokaryotic data and 3-kb N50 on simulated mammalian BACs. When applied to real Solexa data sets without read pairs, Velvet generated contigs of approximately 8 kb in a prokaryote and 2 kb in a mammalian BAC, in close agreement with our simulated results without read-pair information. Velvet represents a new approach to assembly that can leverage very short reads in combination with read pairs to produce useful assemblies.},
-author = {Zerbino, Daniel R and Birney, Ewan},
-doi = {10.1101/gr.074492.107},
-file = {:home/gus/Documents/Mendeley Desktop/Zerbino, Birney\_2008\_Velvet algorithms for de novo short read assembly using de Bruijn graphs.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Animals,Chromosomes, Artificial, Bacterial,Computational Biology,Computational Biology: methods,Computer Simulation,Genome, Bacterial,Genome, Human,Genomics,Humans,Mammals,Mammals: genetics,Sequence Analysis, DNA,Sequence Analysis, DNA: methods,Sequence Analysis, DNA: standards,Streptococcus,Streptococcus: genetics},
-month = may,
-number = {5},
-pages = {821--9},
-pmid = {18349386},
-title = {{Velvet: algorithms for de novo short read assembly using de Bruijn graphs.}},
-url = {http://genome.cshlp.org/cgi/content/abstract/18/5/821},
-volume = {18},
-year = {2008}
-}
-@article{Butler:2008kx,
-abstract = {New DNA sequencing technologies deliver data at dramatically lower costs but demand new analytical methods to take full advantage of the very short reads that they produce. We provide an initial, theoretical solution to the challenge of de novo assembly from whole-genome shotgun "microreads." For 11 genomes of sizes up to 39 Mb, we generated high-quality assemblies from 80x coverage by paired 30-base simulated reads modeled after real Illumina-Solexa reads. The bacterial genomes of Campylobacter jejuni and Escherichia coli assemble optimally, yielding single perfect contigs, and larger genomes yield assemblies that are highly connected and accurate. Assemblies are presented in a graph form that retains intrinsic ambiguities such as those arising from polymorphism, thereby providing information that has been absent from previous genome assemblies. For both C. jejuni and E. coli, this assembly graph is a single edge encompassing the entire genome. Larger genomes produce more complicated graphs, but the vast majority of the bases in their assemblies are present in long edges that are nearly always perfect. We describe a general method for genome assembly that can be applied to all types of DNA sequence data, not only short read data, but also conventional sequence reads.},
-author = {Butler, Jonathan and MacCallum, Iain and Kleber, Michael and Shlyakhter, Ilya a and Belmonte, Matthew K and Lander, Eric S and Nusbaum, Chad and Jaffe, David B},
-doi = {10.1101/gr.7337908},
-file = {:home/gus/Documents/Mendeley Desktop/Butler et al.\_2008\_ALLPATHS de novo assembly of whole-genome shotgun microreads.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Bacterial,Bacterial: genetics,Campylobacter jejuni,Campylobacter jejuni: genetics,Computational Biology,Computational Biology: methods,Computer Simulation,DNA,DNA: methods,DNA: standards,Escherichia coli,Escherichia coli: genetics,Genome,Reproducibility of Results,Sequence Analysis},
-month = may,
-number = {5},
-pages = {810--20},
-pmid = {18340039},
-title = {{ALLPATHS: de novo assembly of whole-genome shotgun microreads.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2336810\&tool=pmcentrez\&rendertype=abstract},
-volume = {18},
-year = {2008}
-}
-@article{Ilie2011a,
-author = {Ilie, L},
-file = {:home/gus/Documents/Mendeley Desktop/Ilie, Fazayeli, Ilie\_2011\_HiTEC accurate error correction in high-throughput sequencing data.pdf:pdf},
-journal = {Bioinformatics},
-title = {{HiTEC: accurate error correction in high-throughput sequencing data}},
-url = {http://bioinformatics.oxfordjournals.org/content/27/3/295.short},
-year = {2011}
-}
-@article{Drmanac2010,
-abstract = {Genome sequencing of large numbers of individuals promises to advance the understanding, treatment, and prevention of human diseases, among other applications. We describe a genome sequencing platform that achieves efficient imaging and low reagent consumption with combinatorial probe anchor ligation chemistry to independently assay each base from patterned nanoarrays of self-assembling DNA nanoballs. We sequenced three human genomes with this platform, generating an average of 45- to 87-fold coverage per genome and identifying 3.2 to 4.5 million sequence variants per genome. Validation of one genome data set demonstrates a sequence accuracy of about 1 false variant per 100 kilobases. The high accuracy, affordable cost of \$4400 for sequencing consumables, and scalability of this platform enable complete human genome sequencing for the detection of rare variants in large-scale genetic studies.},
-author = {Drmanac, Radoje and Sparks, Andrew B and Callow, Matthew J and Halpern, Aaron L and Burns, Norman L and Kermani, Bahram G and Carnevali, Paolo and Nazarenko, Igor and Nilsen, Geoffrey B and Yeung, George and Dahl, Fredrik and Fernandez, Andres and Staker, Bryan and Pant, Krishna P and Baccash, Jonathan and Borcherding, Adam P and Brownley, Anushka and Cedeno, Ryan and Chen, Linsu and Chernikoff, Dan and Cheung, Alex and Chirita, Razvan and Curson, Benjamin and Ebert, Jessica C and Hacker, Coleen R and Hartlage, Robert and Hauser, Brian and Huang, Steve and Jiang, Yuan and Karpinchyk, Vitali and Koenig, Mark and Kong, Calvin and Landers, Tom and Le, Catherine and Liu, Jia and McBride, Celeste E and Morenzoni, Matt and Morey, Robert E and Mutch, Karl and Perazich, Helena and Perry, Kimberly and Peters, Brock A and Peterson, Joe and Pethiyagoda, Charit L and Pothuraju, Kaliprasad and Richter, Claudia and Rosenbaum, Abraham M and Roy, Shaunak and Shafto, Jay and Sharanhovich, Uladzislau and Shannon, Karen W and Sheppy, Conrad G and Sun, Michel and Thakuria, Joseph V and Tran, Anne and Vu, Dylan and Zaranek, Alexander Wait and Wu, Xiaodi and Drmanac, Snezana and Oliphant, Arnold R and Banyai, William C and Martin, Bruce and Ballinger, Dennis G and Church, George M and Reid, Clifford A},
-doi = {10.1126/science.1181498},
-file = {:home/gus/Documents/Mendeley Desktop/Drmanac et al.\_2010\_Human genome sequencing using unchained base reads on self-assembling DNA nanoarrays.pdf:pdf},
-issn = {1095-9203},
-journal = {Science (New York, N.Y.)},
-keywords = {Base Sequence,Computational Biology,Costs and Cost Analysis,DNA,DNA: chemistry,DNA: economics,DNA: genetics,DNA: instrumentation,DNA: methods,DNA: standards,Databases,Genome,Genomic Library,Genotype,Haplotypes,Human,Human Genome Project,Humans,Male,Microarray Analysis,Nanostructures,Nanotechnology,Nucleic Acid,Nucleic Acid Amplification Techniques,Polymorphism,Sequence Analysis,Single Nucleotide,Software},
-month = jan,
-number = {5961},
-pages = {78--81},
-pmid = {19892942},
-title = {{Human genome sequencing using unchained base reads on self-assembling DNA nanoarrays.}},
-url = {http://www.sciencemag.org/content/327/5961/78.abstract},
-volume = {327},
-year = {2010}
-}
-@article{yang2010reptile,
-author = {Yang, X. and Dorman, K.S. and Aluru, S.},
-file = {:home/gus/Documents/Mendeley Desktop/Yang, Dorman, Aluru\_2010\_Reptile representative tiling for short read error correction.pdf:pdf},
-journal = {Bioinformatics},
-number = {20},
-pages = {2526},
-publisher = {Oxford Univ Press},
-title = {{Reptile: representative tiling for short read error correction}},
-url = {http://bioinformatics.oxfordjournals.org/content/26/20/2526.short},
-volume = {26},
-year = {2010}
-}
-@article{Li2003,
-abstract = {In shotgun sequencing projects, the genome or BAC length is not always known. We approach estimating genome length by first estimating the repeat structure of the genome or BAC, sometimes of interest in its own right, on the basis of a set of random reads from a genome project. Moreover, we can find the consensus for repeat families before assembly. Our methods are based on the l-tuple content of the reads.},
-author = {Li, Xiaoman and Waterman, Michael S},
-doi = {10.1101/gr.1251803},
-file = {:home/gus/Documents/Mendeley Desktop/Li, Waterman\_2003\_Estimating the repeat structure and length of DNA sequences using L-tuples.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Artificial,Bacterial,Bacterial: genetics,Base Composition,Chromosome Mapping,Chromosome Mapping: statistics \& numerical data,Chromosomes,Computational Biology,Computational Biology: statistics \& numerical data,Computer Simulation,Computer Simulation: statistics \& numerical data,Consensus Sequence,DNA,Mathematical Computing,Nucleic Acid,Nucleic Acid: genetics,Poisson Distribution,Repetitive Sequences,Software},
-month = aug,
-number = {8},
-pages = {1916--22},
-pmid = {12902383},
-title = {{Estimating the repeat structure and length of DNA sequences using L-tuples.}},
-url = {http://genome.cshlp.org/cgi/content/abstract/13/8/1916},
-volume = {13},
-year = {2003}
-}
-@inproceedings{Cheriyan1991,
-address = {New York, New York, USA},
-author = {Cheriyan, Joseph and Thurimella, Ramakrishna},
-booktitle = {Proceedings of the twenty-third annual ACM symposium on Theory of computing - STOC '91},
-doi = {10.1145/103418.103460},
-file = {:home/gus/Documents/Mendeley Desktop/Cheriyan, Thurimella\_1991\_Algorithms for parallel k -vertex connectivity and sparse certificates.pdf:pdf},
-isbn = {0897913973},
-month = jan,
-pages = {391--401},
-publisher = {ACM Press},
-title = {{Algorithms for parallel k -vertex connectivity and sparse certificates}},
-url = {http://dl.acm.org/citation.cfm?id=103418.103460},
-year = {1991}
-}
-@article{Michael1996,
-address = {New York, New York, USA},
-author = {Michael, Maged M. and Scott, Michael L.},
-doi = {10.1145/248052.248106},
-file = {:home/gus/Documents/Mendeley Desktop/Michael, Scott\_1996\_Simple, fast, and practical non-blocking and blocking concurrent queue algorithms.pdf:pdf},
-isbn = {0897918002},
-journal = {Proceedings of the fifteenth annual ACM symposium on Principles of distributed computing - PODC '96},
-keywords = {compare and swap,concurrent queue,lock-free,multiprogramming,non-blocking},
-pages = {267--275},
-publisher = {ACM Press},
-title = {{Simple, fast, and practical non-blocking and blocking concurrent queue algorithms}},
-url = {http://portal.acm.org/citation.cfm?doid=248052.248106},
-year = {1996}
-}
-@article{Medvedev2011,
-abstract = {The continuing improvements to high-throughput sequencing (HTS) platforms have begun to unfold a myriad of new applications. As a result, error correction of sequencing reads remains an important problem. Though several tools do an excellent job of correcting datasets where the reads are sampled close to uniformly, the problem of correcting reads coming from drastically non-uniform datasets, such as those from single-cell sequencing, remains open.},
-author = {Medvedev, Paul and Scott, Eric and Kakaradov, Boyko and Pevzner, Pavel},
-doi = {10.1093/bioinformatics/btr208},
-file = {:home/gus/Documents/Mendeley Desktop/Medvedev et al.\_2011\_Error correction of high-throughput sequencing datasets with non-uniform coverage.pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-month = jul,
-number = {13},
-pages = {i137--i141},
-pmid = {21685062},
-title = {{Error correction of high-throughput sequencing datasets with non-uniform coverage.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=3117386\&tool=pmcentrez\&rendertype=abstract},
-volume = {27},
-year = {2011}
-}
-@article{Kim:2007uq,
-abstract = {One of the main goals in genome sequencing projects is to determine a haploid consensus sequence even when clone libraries are constructed from homologous chromosomes. However, it has been noticed that haplotypes can be inferred from genome assemblies by investigating phase conservation in sequenced reads. In this study, we seek to infer haplotypes, a diploid consensus sequence, from the genome assembly of an organism, Ciona intestinalis. The Ciona intestinalis genome is an ideal resource from which haplotypes can be inferred because of the high polymorphism rate (1.2\%). The haplotype estimation scheme consists of polymorphism detection and phase estimation. The core step of our method is a Gibbs sampling procedure. The mate-pair information from two-end sequenced clone inserts is exploited to provide long-range continuity. We estimate the polymorphism rate of Ciona intestinalis to be 1.2\% and 1.5\%, according to two different polymorphism counting schemes. The distribution of heterozygosity number is well fit by a compound Poisson distribution. The N50 length of haplotype segments is 37.9 kb in our assembly, while the N50 scaffold length of the Ciona intestinalis assembly is 190 kb. We also infer diploid gene sequences from haplotype segments. According to our reconstruction, 85.4\% of predicted gene sequences are continuously covered by single haplotype segments. Our results indicate 97\% accuracy in haplotype estimation, based on a simulated data set. We conduct a comparative analysis with Ciona savignyi, and discover interesting patterns of conserved DNA elements in chordates.},
-author = {Kim, Jong Hyun and Waterman, Michael S and Li, Lei M},
-doi = {10.1101/gr.5894107},
-file = {:home/gus/Documents/Mendeley Desktop/Kim, Waterman, Li\_2007\_Diploid genome reconstruction of Ciona intestinalis and comparative analysis with Ciona savignyi.pdf:pdf},
-journal = {Genome Res},
-month = jul,
-number = {7},
-pages = {1101--1110},
-pmid = {17567986},
-title = {{Diploid genome reconstruction of Ciona intestinalis and comparative analysis with Ciona savignyi}},
-volume = {17},
-year = {2007}
-}
-@article{Schroder2009,
-abstract = {MOTIVATION: Second-generation sequencing technologies produce a massive amount of short reads in a single experiment. However, sequencing errors can cause major problems when using this approach for de novo sequencing applications. Moreover, existing error correction methods have been designed and optimized for shotgun sequencing. Therefore, there is an urgent need for the design of fast and accurate computational methods and tools for error correction of large amounts of short read data. RESULTS: We present SHREC, a new algorithm for correcting errors in short-read data that uses a generalized suffix trie on the read data as the underlying data structure. Our results show that the method can identify erroneous reads with sensitivity and specificity of over 99\% and 96\% for simulated data with error rates of up to 3\% as well as for real data. Furthermore, it achieves an error correction accuracy of over 80\% for simulated data and over 88\% for real data. These results are clearly superior to previously published approaches. SHREC is available as an efficient open-source Java implementation that allows processing of 10 million of short reads on a standard workstation.},
-author = {Schr\"{o}der, Jan and Schr\"{o}der, Heiko and Puglisi, Simon J and Sinha, Ranjan and Schmidt, Bertil},
-doi = {10.1093/bioinformatics/btp379},
-file = {:home/gus/Documents/Mendeley Desktop/Schr\"{o}der et al.\_2009\_SHREC a short-read error correction method.pdf:pdf;:home/gus/Documents/Mendeley Desktop/Schr\"{o}der et al.\_2009\_SHREC a short-read error correction method(2).pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-keywords = {Algorithms,Computational Biology,Computational Biology: methods,DNA,DNA: genetics,DNA: methods,Databases,Error correction,Genome,Genome: genetics,Nucleic Acid,Research Design,Sequence Analysis,Time Factors},
-mendeley-tags = {Error correction},
-month = sep,
-number = {17},
-pages = {2157--63},
-pmid = {19542152},
-title = {{SHREC: a short-read error correction method.}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/25/17/2157},
-volume = {25},
-year = {2009}
-}
-@inproceedings{sundell2003fast,
-author = {Sundell, H. and Tsigas, P.},
-booktitle = {Parallel and Distributed Processing Symposium, 2003. Proceedings. International},
-file = {:home/gus/Documents/Mendeley Desktop/Sundell, Tsigas\_2003\_Fast and lock-free concurrent priority queues for multi-thread systems.pdf:pdf},
-pages = {11--pp},
-publisher = {IEEE},
-title = {{Fast and lock-free concurrent priority queues for multi-thread systems}},
-url = {http://ieeexplore.ieee.org/xpls/abs\_all.jsp?arnumber=1213189},
-year = {2003}
-}
-@article{Zerbino2009a,
-abstract = {Despite the short length of their reads, micro-read sequencing technologies have shown their usefulness for de novo sequencing. However, especially in eukaryotic genomes, complex repeat patterns are an obstacle to large assemblies.},
-author = {Zerbino, Daniel R DR and McEwen, GK Gayle K and Margulies, Elliott H and Birney, Ewan},
-doi = {10.1371/journal.pone.0008407},
-file = {:home/gus/Documents/Mendeley Desktop/Zerbino, McEwen\_2009\_Pebble and rock band heuristic resolution of repeats and scaffolding in the velvet short-read de novo assembler.pdf:pdf},
-issn = {1932-6203},
-journal = {PloS one},
-keywords = {Algorithms,Animals,Artificial,Bacterial,Bacterial: genetics,Chromosomes,Computer Simulation,DNA,DNA: instrumentation,DNA: methods,Ferrets,Ferrets: genetics,Nucleic Acid,Nucleic Acid: genetics,Pseudomonas syringae,Pseudomonas syringae: genetics,Repetitive Sequences,Sequence Analysis},
-month = jan,
-number = {12},
-pages = {e8407},
-pmid = {20027311},
-title = {{Pebble and rock band: heuristic resolution of repeats and scaffolding in the velvet short-read de novo assembler}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2793427\&tool=pmcentrez\&rendertype=abstract http://dx.plos.org/10.1371/journal.pone.0008407},
-volume = {4},
-year = {2009}
-}
-@misc{TheMendeleySupportTeam2011,
-abstract = {A quick introduction to Mendeley. Learn how Mendeley creates your personal digital library, how to organize and annotate documents, how to collaborate and share with colleagues, and how to generate citations and bibliographies.},
-address = {London},
-author = {{The Mendeley Support Team}},
-booktitle = {Mendeley Desktop},
-file = {:home/gus/Documents/Mendeley Desktop/The Mendeley Support Team\_2011\_Getting Started with Mendeley.pdf:pdf},
-keywords = {Mendeley,how-to,user manual},
-pages = {1--16},
-publisher = {Mendeley Ltd.},
-title = {{Getting Started with Mendeley}},
-url = {http://www.mendeley.com},
-year = {2011}
-}
-@article{Yang2011a,
-abstract = {High-throughput short read sequencing is revolutionizing genomics and systems biology research by enabling cost-effective deep coverage sequencing of genomes and transcriptomes. Error detection and correction are crucial to many short read sequencing applications including de novo genome sequencing, genome resequencing, and digital gene expression analysis. Short read error detection is typically carried out by counting the observed frequencies of kmers in reads and validating those with frequencies exceeding a threshold. In case of genomes with high repeat content, an erroneous kmer may be frequently observed if it has few nucleotide differences with valid kmers with multiple occurrences in the genome. Error detection and correction were mostly applied to genomes with low repeat content and this remains a challenging problem for genomes with high repeat content.},
-author = {Yang, Xiao and Aluru, Srinivas and Dorman, Karin S},
-doi = {10.1186/1471-2105-12-S1-S52},
-file = {:home/gus/Documents/Mendeley Desktop//Yang, Aluru, Dorman\_2011\_Repeat-aware modeling and correction of short read errors.pdf:pdf},
-issn = {1471-2105},
-journal = {BMC bioinformatics},
-keywords = {Algorithms,Computational Biology,Computational Biology: methods,Genomics,Genomics: methods,High-Throughput Nucleotide Sequencing,High-Throughput Nucleotide Sequencing: methods,Likelihood Functions,Models, Statistical,Software,Statistical},
-month = jan,
-pages = {S52},
-pmid = {21342585},
-title = {{Repeat-aware modeling and correction of short read errors.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=3044310\&tool=pmcentrez\&rendertype=abstract},
-volume = {12 Suppl 1},
-year = {2011}
-}
-@article{Kim:2007uq,
-abstract = {One of the main goals in genome sequencing projects is to determine a haploid consensus sequence even when clone libraries are constructed from homologous chromosomes. However, it has been noticed that haplotypes can be inferred from genome assemblies by investigating phase conservation in sequenced reads. In this study, we seek to infer haplotypes, a diploid consensus sequence, from the genome assembly of an organism, Ciona intestinalis. The Ciona intestinalis genome is an ideal resource from which haplotypes can be inferred because of the high polymorphism rate (1.2\%). The haplotype estimation scheme consists of polymorphism detection and phase estimation. The core step of our method is a Gibbs sampling procedure. The mate-pair information from two-end sequenced clone inserts is exploited to provide long-range continuity. We estimate the polymorphism rate of Ciona intestinalis to be 1.2\% and 1.5\%, according to two different polymorphism counting schemes. The distribution of heterozygosity number is well fit by a compound Poisson distribution. The N50 length of haplotype segments is 37.9 kb in our assembly, while the N50 scaffold length of the Ciona intestinalis assembly is 190 kb. We also infer diploid gene sequences from haplotype segments. According to our reconstruction, 85.4\% of predicted gene sequences are continuously covered by single haplotype segments. Our results indicate 97\% accuracy in haplotype estimation, based on a simulated data set. We conduct a comparative analysis with Ciona savignyi, and discover interesting patterns of conserved DNA elements in chordates.},
-author = {Kim, Jong Hyun and Waterman, Michael S and Li, Lei M},
-doi = {10.1101/gr.5894107},
-journal = {Genome Res},
-month = jul,
-number = {7},
-pages = {1101--1110},
-pmid = {17567986},
-title = {{Diploid genome reconstruction of Ciona intestinalis and comparative analysis with Ciona savignyi}},
-volume = {17},
-year = {2007}
-}
-@inproceedings{michael2002safe,
-author = {Michael, M.M.},
-booktitle = {Proceedings of the twenty-first annual symposium on Principles of distributed computing},
-file = {:home/gus/Documents/Mendeley Desktop/Michael\_2002\_Safe memory reclamation for dynamic lock-free objects using atomic reads and writes.pdf:pdf},
-pages = {21--30},
-publisher = {ACM},
-title = {{Safe memory reclamation for dynamic lock-free objects using atomic reads and writes}},
-url = {http://portal.acm.org/citation.cfm?id=571829},
-year = {2002}
-}
-@article{Langmead2009,
-abstract = {Bowtie is an ultrafast, memory-efficient alignment program for aligning short DNA sequence reads to large genomes. For the human genome, Burrows-Wheeler indexing allows Bowtie to align more than 25 million reads per CPU hour with a memory footprint of approximately 1.3 gigabytes. Bowtie extends previous Burrows-Wheeler techniques with a novel quality-aware backtracking algorithm that permits mismatches. Multiple processor cores can be used simultaneously to achieve even greater alignment speeds. Bowtie is open source (http://bowtie.cbcb.umd.edu).},
-author = {Langmead, Ben and Trapnell, Cole and Pop, Mihai and Salzberg, Steven L},
-doi = {10.1186/gb-2009-10-3-r25},
-file = {:home/gus/Documents/Mendeley Desktop/Langmead et al.\_2009\_Ultrafast and memory-efficient alignment of short DNA sequences to the human genome.pdf:pdf},
-issn = {1465-6914},
-journal = {Genome biology},
-keywords = {Algorithms,Base Sequence,Genome,Human,Human: genetics,Humans,Sequence Alignment,Sequence Alignment: methods},
-month = jan,
-number = {3},
-pages = {R25},
-pmid = {19261174},
-title = {{Ultrafast and memory-efficient alignment of short DNA sequences to the human genome.}},
-url = {http://genomebiology.com/2009/10/3/R25},
-volume = {10},
-year = {2009}
-}
-@incollection{Hart2008,
-address = {New York},
-author = {Hart, John P.},
-booktitle = {Current Northeast Paleoethnobotany II},
-chapter = {7},
-editor = {Hart, John P.},
-file = {:home/gus/Documents/Mendeley Desktop/Hart\_2008\_Evolving the three sisters the changing histories of maize, bean, and squash in new york and the greater northeast.pdf:pdf},
-pages = {87--100},
-publisher = {New York State Museum Bulletin 512},
-title = {{Evolving the three sisters: the changing histories of maize, bean, and squash in new york and the greater northeast}},
-year = {2008}
-}
-@article{Farach1997,
-author = {Farach, M.},
-file = {:home/gus/Documents/Mendeley Desktop/Farach\_1997\_Optimal suffix tree construction with large alphabets.pdf:pdf},
-isbn = {0-8186-8197-7},
-keywords = {combinatorial pattern matching,data structure,integer alphabet,integer alphabets,large alphabets,pattern matching,sorting,suffix tree},
-month = oct,
-pages = {137},
-title = {{Optimal suffix tree construction with large alphabets}},
-url = {http://dl.acm.org/citation.cfm?id=795663.796326},
-year = {1997}
-}
-@article{Gonzalez-Porta2011,
-abstract = {DNA arrays have been widely used to perform transcriptome-wide analysis of gene expression, and many methods have been developed to measure gene expression variability and to compare gene expression between conditions. Because RNA-seq is also becoming increasingly popular for transcriptome characterization, the possibility exists for further quantification of individual alternative transcript isoforms, and therefore for estimating the relative ratios of alternative splice forms within a given gene. Changes in splicing ratios, even without changes in overall gene expression, may have important phenotypic effects. Here we have developed statistical methodology to measure variability in splicing ratios within conditions, to compare it between conditions, and to identify genes with condition-specific splicing ratios. Furthermore, we have developed methodology to deconvolute the relative contribution of variability in gene expression versus variability in splicing ratios to the overall variability of transcript abundances. As a proof of concept, we have applied this methodology to estimates of transcript abundances obtained from RNA-seq experiments in lymphoblastoid cells from Caucasian and Yoruban individuals. We have found that protein-coding genes exhibit low splicing variability within populations, with many genes exhibiting constant ratios across individuals. When comparing these two populations, we have found that up to 10\% of the studied protein-coding genes exhibit population-specific splicing ratios. We estimate that ∼60\% of the total variability observed in the abundance of transcript isoforms can be explained by variability in transcription. A large fraction of the remaining variability can likely result from variability in splicing. Finally, we also detected that variability in splicing is uncommon without variability in transcription.},
-author = {Gonz\`{a}lez-Porta, Mar and Calvo, Miquel and Sammeth, Michael and Guig\'{o}, Roderic},
-doi = {10.1101/gr.121947.111},
-file = {:home/gus/Documents/Mendeley Desktop/Gonz\`{a}lez-Porta et al.\_2011\_Estimation of alternative splicing variability in human populations.pdf:pdf},
-issn = {1549-5469},
-journal = {Genome research},
-month = dec,
-number = {3},
-pages = {528--538},
-pmid = {22113879},
-title = {{Estimation of alternative splicing variability in human populations.}},
-url = {http://genome.cshlp.org/cgi/content/abstract/22/3/528},
-volume = {22},
-year = {2011}
-}
-@article{Bloom1970,
-author = {Bloom, Burton H.},
-doi = {10.1145/362686.362692},
-file = {:home/gus/Documents/Mendeley Desktop/Bloom\_1970\_Spacetime trade-offs in hash coding with allowable errors.pdf:pdf},
-issn = {00010782},
-journal = {Communications of the ACM},
-keywords = {Bloom filter,hash addressing,hash coding,retrieval efficiency,retrieval trade-offs,scatter storage,searching,storage efficiency,storage layout},
-mendeley-tags = {Bloom filter},
-month = jul,
-number = {7},
-pages = {422--426},
-title = {{Space/time trade-offs in hash coding with allowable errors}},
-url = {http://dl.acm.org/citation.cfm?id=362686.362692},
-volume = {13},
-year = {1970}
-}
-@inproceedings{Gao2004,
-author = {Gao, H. and Groote, J.F. F and Hesselink, W.H. H},
-booktitle = {18th International Parallel and Distributed Processing Symposium},
-doi = {10.1109/IPDPS.2004.1302969},
-file = {:home/gus/Documents/Mendeley Desktop/Gao, Groote, Hesselink\_Unknown\_Almost wait-free resizable hashtables.pdf:pdf},
-isbn = {0769521320},
-number = {C},
-pages = {50--58},
-publisher = {Ieee},
-title = {{Almost wait-free resizable hashtables}},
-url = {http://ieeexplore.ieee.org/lpdocs/epic03/wrapper.htm?arnumber=1302969},
-volume = {00},
-year = {2004}
-}
-@article{nagarajan2009parametric,
-author = {Nagarajan, N. and Pop, M.},
-file = {:home/gus/Documents/Mendeley Desktop/Nagarajan, Pop\_2009\_Parametric complexity of sequence assembly theory and applications to next generation sequencing.pdf:pdf},
-journal = {Journal of computational biology},
-number = {7},
-pages = {897--908},
-publisher = {Mary Ann Liebert, Inc. 140 Huguenot Street, 3rd Floor New Rochelle, NY 10801 USA},
-title = {{Parametric complexity of sequence assembly: theory and applications to next generation sequencing}},
-url = {http://www.liebertonline.com/doi/abs/10.1089/cmb.2009.0005},
-volume = {16},
-year = {2009}
-}
-@article{Kawrykow2012,
-abstract = {Background
-          Comparative genomics, or the study of the relationships of genome structure and function across different species, offers a powerful tool for studying evolution, annotating genomes, and understanding the causes of various genetic disorders. However, aligning multiple sequences of DNA, an essential intermediate step for most types of analyses, is a difficult computational task. In parallel, citizen science, an approach that takes advantage of the fact that the human brain is exquisitely tuned to solving specific types of problems, is becoming increasingly popular. There, instances of hard computational problems are dispatched to a crowd of non-expert human game players and solutions are sent back to a central server.
-        
-        
-          Methodology/Principal Findings
-          We introduce Phylo, a human-based computing framework applying “crowd sourcing” techniques to solve the Multiple Sequence Alignment (MSA) problem. The key idea of Phylo is to convert the MSA problem into a casual game that can be played by ordinary web users with a minimal prior knowledge of the biological context. We applied this strategy to improve the alignment of the promoters of disease-related genes from up to 44 vertebrate species. Since the launch in November 2010, we received more than 350,000 solutions submitted from more than 12,000 registered users. Our results show that solutions submitted contributed to improving the accuracy of up to 70\% of the alignment blocks considered.
-        
-        
-          Conclusions/Significance
-          We demonstrate that, combined with classical algorithms, crowd computing techniques can be successfully used to help improving the accuracy of MSA. More importantly, we show that an NP-hard computational problem can be embedded in casual game that can be easily played by people without significant scientific training. This suggests that citizen science approaches can be used to exploit the billions of “human-brain peta-flops” of computation that are spent every day playing games. Phylo is available at: http://phylo.cs.mcgill.ca.},
-author = {Kawrykow, Alexander and Roumanis, Gary and Kam, Alfred and Kwak, Daniel and Leung, Clarence and Wu, Chu and Zarour, Eleyine and Sarmenta, Luis and Blanchette, Mathieu and Waldisp\"{u}hl, J\'{e}r\^{o}me},
-doi = {10.1371/journal.pone.0031362},
-editor = {Michalak, Pawel},
-file = {:home/gus/Documents/Mendeley Desktop/Kawrykow et al.\_2012\_Phylo A Citizen Science Approach for Improving Multiple Sequence Alignment.pdf:pdf},
-issn = {1932-6203},
-journal = {PLoS ONE},
-keywords = {Biology,Computational Biology,Computer Science,Computer applications,Computing methods,Evolutionary Biology,Genetics,Genetics and Genomics,Genomics,Organismal evolution,Research Article},
-month = mar,
-number = {3},
-pages = {e31362},
-publisher = {Public Library of Science},
-title = {{Phylo: A Citizen Science Approach for Improving Multiple Sequence Alignment}},
-url = {http://dx.plos.org/10.1371/journal.pone.0031362},
-volume = {7},
-year = {2012}
-}
-@article{shi2010parallel,
-author = {Shi, H. and Schmidt, B. and Liu, W. and M\"{u}ller-Wittig, W.},
-file = {:home/gus/Documents/Mendeley Desktop/Shi et al.\_2010\_A parallel algorithm for error correction in high-throughput short-read data on CUDA-enabled graphics hardware.pdf:pdf},
-journal = {Journal of Computational Biology},
-number = {4},
-pages = {603--615},
-publisher = {Mary Ann Liebert, Inc. 140 Huguenot Street, 3rd Floor New Rochelle, NY 10801 USA},
-title = {{A parallel algorithm for error correction in high-throughput short-read data on CUDA-enabled graphics hardware}},
-url = {http://www.liebertonline.com/doi/abs/10.1089/cmb.2009.0062},
-volume = {17},
-year = {2010}
-}
-@article{Marcais2011,
-abstract = {Counting the number of occurrences of every k-mer (substring of length k) in a long string is a central subproblem in many applications, including genome assembly, error correction of sequencing reads, fast multiple sequence alignment and repeat detection. Recently, the deep sequence coverage generated by next-generation sequencing technologies has caused the amount of sequence to be processed during a genome project to grow rapidly, and has rendered current k-mer counting tools too slow and memory intensive. At the same time, large multicore computers have become commonplace in research facilities allowing for a new parallel computational paradigm.},
-author = {Mar\c{c}ais, Guillaume and Kingsford, Carl},
-doi = {10.1093/bioinformatics/btr011},
-file = {:home/gus/Documents/Mendeley Desktop/Mar\c{c}ais, Kingsford\_2011\_A fast, lock-free approach for efficient parallel counting of occurrences of k-mers.pdf:pdf;:home/gus/Documents/Mendeley Desktop/Mar\c{c}ais, Kingsford\_2011\_A fast, lock-free approach for efficient parallel counting of occurrences of k-mers(2).pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-keywords = {Algorithms,Animals,Base Sequence,Computational Biology,Computational Biology: methods,DNA,DNA: methods,Genome,Humans,Sequence Alignment,Sequence Analysis,Software},
-month = mar,
-number = {6},
-pages = {764--70},
-pmid = {21217122},
-title = {{A fast, lock-free approach for efficient parallel counting of occurrences of k-mers.}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/27/6/764},
-volume = {27},
-year = {2011}
-}
-@article{Maccallum:2009vn,
-abstract = {We demonstrate that genome sequences approaching finished quality can be generated from short paired reads. Using 36 base (fragment) and 26 base (jumping) reads from five microbial genomes of varied GC composition and sizes up to 40 Mb, ALLPATHS2 generated assemblies with long, accurate contigs and scaffolds. Velvet and EULER-SR were less accurate. For example, for Escherichia coli, the fraction of 10-kb stretches that were perfect was 99.8\% (ALLPATHS2), 68.7\% (Velvet), and 42.1\% (EULER-SR).},
-author = {Maccallum, Iain and Przybylski, Dariusz and Gnerre, Sante and Burton, Joshua and Shlyakhter, Ilya and Gnirke, Andreas and Malek, Joel and McKernan, Kevin and Ranade, Swati and Shea, Terrance P and Williams, Louise and Young, Sarah and Nusbaum, Chad and Jaffe, David B},
-doi = {10.1186/gb-2009-10-10-r103},
-file = {:home/gus/Documents/Mendeley Desktop//Maccallum et al.\_2009\_ALLPATHS 2 small genomes assembled accurately and with high continuity from short paired reads.pdf:pdf},
-issn = {1465-6914},
-journal = {Genome biology},
-keywords = {Bacteria,Bacteria: genetics,Base Pairing,Base Pairing: genetics,Fungi,Fungi: genetics,Genome,Genome: genetics,Genomics,Genomics: methods,Reproducibility of Results,Software},
-month = jan,
-number = {10},
-pages = {R103},
-pmid = {19796385},
-title = {{ALLPATHS 2: small genomes assembled accurately and with high continuity from short paired reads.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2784318\&tool=pmcentrez\&rendertype=abstract},
-volume = {10},
-year = {2009}
-}
-@article{Roberts2004,
-abstract = {MOTIVATION: Comparison of nucleic acid and protein sequences is a fundamental tool of modern bioinformatics. A dominant method of such string matching is the 'seed-and-extend' approach, in which occurrences of short subsequences called 'seeds' are used to search for potentially longer matches in a large database of sequences. Each such potential match is then checked to see if it extends beyond the seed. To be effective, the seed-and-extend approach needs to catalogue seeds from virtually every substring in the database of search strings. Projects such as mammalian genome assemblies and large-scale protein matching, however, have such large sequence databases that the resulting list of seeds cannot be stored in RAM on a single computer. This significantly slows the matching process. RESULTS: We present a simple and elegant method in which only a small fraction of seeds, called 'minimizers', needs to be stored. Using minimizers can speed up string-matching computations by a large factor while missing only a small fraction of the matches found using all seeds.},
-author = {Roberts, Michael and Hayes, Wayne and Hunt, Brian R and Mount, Stephen M and Yorke, James A},
-doi = {10.1093/bioinformatics/bth408},
-file = {:home/gus/Documents/Mendeley Desktop/Roberts et al.\_2004\_Reducing storage requirements for biological sequence comparison.pdf:pdf;:home/gus/Documents/Mendeley Desktop/Roberts et al.\_2004\_Reducing storage requirements for biological sequence comparison(3).pdf:pdf},
-issn = {1367-4803},
-journal = {Bioinformatics (Oxford, England)},
-keywords = {Algorithms,Computer-Assisted,Databases,Genetic,Information Storage and Retrieval,Information Storage and Retrieval: methods,Numerical Analysis,Sequence Alignment,Sequence Alignment: methods,Sequence Analysis,Sequence Analysis: methods},
-month = dec,
-number = {18},
-pages = {3363--9},
-pmid = {15256412},
-title = {{Reducing storage requirements for biological sequence comparison.}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/20/18/3363},
-volume = {20},
-year = {2004}
-}
-@article{Ilie2011c,
-abstract = {Multiple spaced seeds represent the current state-of-the-art for similarity search in bioinformatics, with applications in various areas such as sequence alignment, read mapping, oligonucleotide design, etc. We present SpEED, a software program that computes highly sensitive multiple spaced seeds. SpEED can be several orders of magnitude faster and computes better seeds than the existing leading software programs.},
-author = {Ilie, Lucian and Ilie, Silvana and {Mansouri Bigvand}, Anahita},
-doi = {10.1093/bioinformatics/btr368},
-file = {:home/gus/Documents/Mendeley Desktop/Ilie, Ilie, Mansouri Bigvand\_2011\_SpEED fast computation of sensitive spaced seeds.pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-month = sep,
-number = {17},
-pages = {2433--4},
-pmid = {21690104},
-title = {{SpEED: fast computation of sensitive spaced seeds.}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/27/17/2433},
-volume = {27},
-year = {2011}
-}
-@misc{JeffGilchrist2008,
-abstract = {In this paper, we present parallel algorithms for lossless data compression based on the Burrows-Wheeler Transform (BWT) block-sorting technique. We investigate the performance of using data parallelism and task parallelism for both multi-threaded and message-passing programming. The output produced by the parallel algorithms is fully compatible with their sequential counterparts. To balance the workload among processors we develop a task scheduling strategy. An extensive set of experiments is performed with a shared memory NUMA system using up to 120 processors and on a distributed memory cluster using up to 100 processors. Our experimental results show that significant speedup can be achieved with both data parallel and task parallel methodologies. These algorithms will greatly reduce the amount of time it takes to compress large amounts of data while the compressed data remains in a form that users without access to multiple processor systems can still use.},
-author = {{Jeff Gilchrist} and {Aysegul Cuhadar}},
-booktitle = {International Journal of Web and Grid Services},
-doi = {10.1504/IJWGS.2008.018498},
-file = {:home/gus/Documents/Mendeley Desktop/Jeff Gilchrist, Aysegul Cuhadar\_2008\_Parallel lossless data compression using the Burrows-Wheeler Transform.html:html},
-keywords = {BWT,Burrows-Wheeler Transform,MPI,bzip2,data parallelism,distributed computing,lossless data compression,message passing interface,multi-threading,parallel computing,task parallelism,task scheduling.,workload balance},
-pages = {117--135},
-title = {{Parallel lossless data compression using the Burrows-Wheeler Transform}},
-url = {http://www.inderscience.com/search/index.php?action=record\&rec\_id=18498\&prevQuery=\&ps=10\&m=or},
-urldate = {11/10/11},
-volume = {4},
-year = {2008}
-}
-@article{Anders2010,
-abstract = {High-throughput sequencing assays such as RNA-Seq, ChIP-Seq or barcode counting provide quantitative readouts in the form of count data. To infer differential signal in such data correctly and with good statistical power, estimation of data variability throughout the dynamic range and a suitable error model are required. We propose a method based on the negative binomial distribution, with variance and mean linked by local regression and present an implementation, DESeq, as an R/Bioconductor package.},
-author = {Anders, Simon and Huber, Wolfgang},
-doi = {10.1186/gb-2010-11-10-r106},
-file = {:home/gus/Documents/Mendeley Desktop/Anders, Huber\_2010\_Differential expression analysis for sequence count data.pdf:pdf},
-issn = {1465-6914},
-journal = {Genome biology},
-keywords = {Animals,Binomial Distribution,Chromatin Immunoprecipitation,Chromatin Immunoprecipitation: methods,Computational Biology,Computational Biology: methods,Drosophila,Drosophila: genetics,Gene Expression Profiling,Gene Expression Profiling: methods,High-Throughput Nucleotide Sequencing,High-Throughput Nucleotide Sequencing: methods,Linear Models,Models, Genetic,Saccharomyces cerevisiae,Saccharomyces cerevisiae: genetics,Sequence Analysis, RNA,Sequence Analysis, RNA: methods,Stem Cells,Tissue Culture Techniques},
-month = jan,
-number = {10},
-pages = {R106},
-pmid = {20979621},
-title = {{Differential expression analysis for sequence count data.}},
-url = {http://genomebiology.com/2010/11/10/R106},
-volume = {11},
-year = {2010}
-}
-@article{10.1371/journal.pone.0005350,
-abstract = { <p>The success of genome-wide association (GWA) studies for the detection of sequence variation affecting complex traits in human has spurred interest in the use of large-scale high-density single nucleotide polymorphism (SNP) genotyping for the identification of quantitative trait loci (QTL) and for marker-assisted selection in model and agricultural species. A cost-effective and efficient approach for the development of a custom genotyping assay interrogating 54,001 SNP loci to support GWA applications in cattle is described. A novel algorithm for achieving a compressed inter-marker interval distribution proved remarkably successful, with median interval of 37 kb and maximum predicted gap of \&lt;350 kb. The assay was tested on a panel of 576 animals from 21 cattle breeds and six outgroup species and revealed that from 39,765 to 46,492 SNP are polymorphic within individual breeds (average minor allele frequency (MAF) ranging from 0.24 to 0.27). The assay also identified 79 putative copy number variants in cattle. Utility for GWA was demonstrated by localizing known variation for coat color and the presence/absence of horns to their correct genomic locations. The combination of SNP selection and the novel spacing algorithm allows an efficient approach for the development of high-density genotyping platforms in species having full or even moderate quality draft sequence. Aspects of the approach can be exploited in species which lack an available genome sequence. The BovineSNP50 assay described here is commercially available from Illumina and provides a robust platform for mapping disease genes and QTL in cattle.</p> },
-author = {K., Lakshmi and T., Lawley Cynthia and D., Schnabel Robert and F., Taylor Jeremy and F., Allan Mark and P., Heaton Michael and Jeff, O'Connell and S., Moore Stephen and L., Smith Timothy P and S., Sonstegard Tad and Matukumalli, Van Tassell Curtis P},
-doi = {10.1371/journal.pone.0005350},
-journal = {PLoS ONE},
-number = {4},
-pages = {e5350},
-publisher = {Public Library of Science},
-title = {{Development and Characterization of a High Density SNP Genotyping Assay for Cattle}},
-url = {http://dx.doi.org/10.1371/journal.pone.0005350},
-volume = {4},
-year = {2009}
-}
-@article{Dean2008,
-author = {Dean, Jeffrey and Ghemawat, Sanjay},
-doi = {10.1145/1327452.1327492},
-file = {:home/gus/Documents/Mendeley Desktop/Dean, Ghemawat\_2008\_MapReduce.pdf:pdf},
-issn = {00010782},
-journal = {Communications of the ACM},
-month = jan,
-number = {1},
-pages = {107},
-title = {{MapReduce}},
-url = {http://dl.acm.org/citation.cfm?id=1327452.1327492},
-volume = {51},
-year = {2008}
-}
-@article{Hernandez2008,
-abstract = {Novel high-throughput DNA sequencing technologies allow researchers to characterize a bacterial genome during a single experiment and at a moderate cost. However, the increase in sequencing throughput that is allowed by using such platforms is obtained at the expense of individual sequence read length, which must be assembled into longer contigs to be exploitable. This study focuses on the Illumina sequencing platform that produces millions of very short sequences that are 35 bases in length. We propose a de novo assembler software that is dedicated to process such data. Based on a classical overlap graph representation and on the detection of potentially spurious reads, our software generates a set of accurate contigs of several kilobases that cover most of the bacterial genome. The assembly results were validated by comparing data sets that were obtained experimentally for Staphylococcus aureus strain MW2 and Helicobacter acinonychis strain Sheeba with that of their published genomes acquired by conventional sequencing of 1.5- to 3.0-kb fragments. We also provide indications that the broad coverage achieved by high-throughput sequencing might allow for the detection of clonal polymorphisms in the set of DNA molecules being sequenced.},
-author = {Hernandez, David and Fran\c{c}ois, Patrice and Farinelli, Laurent and Oster\aa s, Magne and Schrenzel, Jacques},
-doi = {10.1101/gr.072033.107},
-file = {:home/gus/Documents/Mendeley Desktop/Hernandez et al.\_2008\_De novo bacterial genome sequencing millions of very short reads assembled on a desktop computer.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Chromosome Mapping,Genome, Bacterial,Genome, Bacterial: genetics,Helicobacter,Helicobacter: classification,Helicobacter: genetics,Microcomputers,Polymorphism, Genetic,Reproducibility of Results,Sequence Analysis, DNA,Sequence Analysis, DNA: economics,Sequence Analysis, DNA: instrumentation,Sequence Analysis, DNA: methods,Software,Staphylococcus aureus,Staphylococcus aureus: classification,Staphylococcus aureus: genetics},
-month = may,
-number = {5},
-pages = {802--9},
-pmid = {18332092},
-title = {{De novo bacterial genome sequencing: millions of very short reads assembled on a desktop computer.}},
-url = {http://genome.cshlp.org/cgi/content/abstract/18/5/802},
-volume = {18},
-year = {2008}
-}
-@article{Schatz:2010uq,
-abstract = {Second-generation sequencing technology can now be used to sequence an entire human genome in a matter of days and at low cost. Sequence read lengths, initially very short, have rapidly increased since the technology first appeared, and we now are seeing a growing number of efforts to sequence large genomes de novo from these short reads. In this Perspective, we describe the issues associated with short-read assembly, the different types of data produced by second-gen sequencers, and the latest assembly algorithms designed for these data. We also review the genomes that have been assembled recently from short reads and make recommendations for sequencing strategies that will yield a high-quality assembly.},
-author = {Schatz, Michael C and Delcher, Arthur L and Salzberg, Steven L},
-doi = {10.1101/gr.101360.109},
-file = {:home/gus/Documents/Mendeley Desktop/Schatz, Delcher, Salzberg\_2010\_Assembly of large genomes using second-generation sequencing.pdf:pdf},
-issn = {1549-5469},
-journal = {Genome research},
-keywords = {Algorithms,Base Sequence,DNA,DNA: methods,Genome,Genomics,Genomics: methods,Human,Humans,Sequence Analysis},
-month = sep,
-number = {9},
-pages = {1165--73},
-pmid = {20508146},
-title = {{Assembly of large genomes using second-generation sequencing.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2928494\&tool=pmcentrez\&rendertype=abstract},
-volume = {20},
-year = {2010}
-}
-@article{Grabherr2011,
-abstract = {Massively parallel sequencing of cDNA has enabled deep and efficient probing of transcriptomes. Current approaches for transcript reconstruction from such data often rely on aligning reads to a reference genome, and are thus unsuitable for samples with a partial or missing reference genome. Here we present the Trinity method for de novo assembly of full-length transcripts and evaluate it on samples from fission yeast, mouse and whitefly, whose reference genome is not yet available. By efficiently constructing and analyzing sets of de Bruijn graphs, Trinity fully reconstructs a large fraction of transcripts, including alternatively spliced isoforms and transcripts from recently duplicated genes. Compared with other de novo transcriptome assemblers, Trinity recovers more full-length transcripts across a broad range of expression levels, with a sensitivity similar to methods that rely on genome alignments. Our approach provides a unified solution for transcriptome reconstruction in any sample, especially in the absence of a reference genome.},
-author = {Grabherr, Manfred G and Haas, Brian J and Yassour, Moran and Levin, Joshua Z and Thompson, Dawn A and Amit, Ido and Adiconis, Xian and Fan, Lin and Raychowdhury, Raktima and Zeng, Qiandong and Chen, Zehua and Mauceli, Evan and Hacohen, Nir and Gnirke, Andreas and Rhind, Nicholas and di Palma, Federica and Birren, Bruce W and Nusbaum, Chad and Lindblad-Toh, Kerstin and Friedman, Nir and Regev, Aviv},
-doi = {10.1038/nbt.1883},
-file = {:home/gus/Documents/Mendeley Desktop/Grabherr et al.\_2011\_Full-length transcriptome assembly from RNA-Seq data without a reference genome.pdf:pdf},
-issn = {1546-1696},
-journal = {Nature biotechnology},
-month = may,
-number = {7},
-pages = {644--652},
-pmid = {21572440},
-publisher = {Nature Publishing Group, a division of Macmillan Publishers Limited. All Rights Reserved.},
-shorttitle = {Nat Biotech},
-title = {{Full-length transcriptome assembly from RNA-Seq data without a reference genome.}},
-url = {http://dx.doi.org/10.1038/nbt.1883},
-volume = {29},
-year = {2011}
-}
-@article{Ruffalo2011,
-abstract = {Motivation: The advent of next-generation sequencing (NGS) techniques presents many novel opportunities for many applications in life sciences. The vast number of short reads produced by these techniques, however, pose significant computational challenges. The first step in many types of genomic analysis is the mapping of short reads to a reference genome, and several groups have developed dedicated algorithms and software packages to perform this function. As the developers of these packages optimize their algorithms with respect to various considerations, the relative merits of different software packages remain unclear. However, for scientists who generate and use NGS data for their specific research projects, an important consideration is choosing the software that is most suitable for their application. Results: With a view to comparing existing short read alignment software, we develop a simulation and evaluation suite, SEAL, which simulates NGS runs for different configurations of various factors, including sequencing error, indels and coverage. We also develop criteria to compare the performances of software with disparate output structure (e.g. some packages return a single alignment while some return multiple possible alignments). Using these criteria, we comprehensively evaluate the performances of Bowtie, BWA, mr- and mrsFAST, Novoalign, SHRiMP and SOAPv2, with regard to accuracy and runtime. Conclusion: We expect that the results presented here will be useful to investigators in choosing the alignment software that is most suitable for their specific research aims. Our results also provide insights into the factors that should be considered to use alignment results effectively. SEAL can also be used to evaluate the performance of algorithms that use deep sequencing data for various purposes (e.g. identification of genomic variants). Availability: SEAL is available as open source at http://compbio.case.edu/seal/. Contact: matthew.ruffalo@case.edu Supplementary information: Supplementary data are available at Bioinformatics online.},
-author = {Ruffalo, M. and LaFramboise, T. and Koyuturk, M.},
-doi = {10.1093/bioinformatics/btr477},
-file = {:home/gus/Documents/Mendeley Desktop/Ruffalo, LaFramboise, Koyuturk\_2011\_Comparative analysis of algorithms for next-generation sequencing read alignment.pdf:pdf},
-issn = {1367-4803},
-journal = {Bioinformatics},
-month = aug,
-number = {20},
-pages = {2790--2796},
-title = {{Comparative analysis of algorithms for next-generation sequencing read alignment}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/27/20/2790},
-volume = {27},
-year = {2011}
-}
-@article{Almeida2007,
-author = {Almeida, Paulo S\'{e}rgio and Baquero, Carlos and Pregui\c{c}a, Nuno and Hutchison, David},
-issn = {0020-0190},
-journal = {Information Processing Letters},
-keywords = {Bloom filters,Data structures,Distributed systems,Randomized algorithms},
-month = mar,
-number = {6},
-pages = {255--261},
-title = {{Scalable Bloom Filters}},
-url = {http://www.sciencedirect.com/science/article/pii/S0020019006003127},
-volume = {101},
-year = {2007}
-}
-@inproceedings{Chazelle:2004:BFE:982792.982797,
-address = {Philadelphia, PA, USA},
-author = {Chazelle, Bernard and Kilian, Joe and Rubinfeld, Ronitt and Tal, Ayellet},
-booktitle = {Proceedings of the fifteenth annual ACM-SIAM symposium on Discrete algorithms},
-isbn = {0-89871-558-X},
-pages = {30--39},
-publisher = {Society for Industrial and Applied Mathematics},
-series = {SODA '04},
-title = {{The Bloomier filter: an efficient data structure for static support lookup tables}},
-url = {http://dl.acm.org/citation.cfm?id=982792.982797},
-year = {2004}
-}
-@article{Schatz:2010uq,
-abstract = {Second-generation sequencing technology can now be used to sequence an entire human genome in a matter of days and at low cost. Sequence read lengths, initially very short, have rapidly increased since the technology first appeared, and we now are seeing a growing number of efforts to sequence large genomes de novo from these short reads. In this Perspective, we describe the issues associated with short-read assembly, the different types of data produced by second-gen sequencers, and the latest assembly algorithms designed for these data. We also review the genomes that have been assembled recently from short reads and make recommendations for sequencing strategies that will yield a high-quality assembly.},
-author = {Schatz, Michael C and Delcher, Arthur L and Salzberg, Steven L},
-doi = {10.1101/gr.101360.109},
-journal = {Genome Res},
-month = sep,
-number = {9},
-pages = {1165--1173},
-pmid = {20508146},
-title = {{Assembly of large genomes using second-generation sequencing}},
-volume = {20},
-year = {2010}
-}
-@article{Zimin2009,
-abstract = {The genome of the domestic cow, Bos taurus, was sequenced using a mixture of hierarchical and whole-genome shotgun sequencing methods.},
-author = {Zimin, Aleksey V and Delcher, Arthur L and Florea, Liliana and Kelley, David R and Schatz, Michael C and Puiu, Daniela and Hanrahan, Finnian and Pertea, Geo and {Van Tassell}, Curtis P and Sonstegard, Tad S and Mar\c{c}ais, Guillaume and Roberts, Michael and Subramanian, Poorani and Yorke, James a and Salzberg, Steven L},
-doi = {10.1186/gb-2009-10-4-r42},
-file = {:home/gus/Documents/Mendeley Desktop/Zimin et al.\_2009\_A whole-genome assembly of the domestic cow, Bos taurus.pdf:pdf},
-issn = {1465-6914},
-journal = {Genome biology},
-keywords = {Animals,Cattle,Cattle: genetics,Chromosome Mapping,Female,Genome,Genome, Human,Genome, Human: genetics,Genome: genetics,Genomics,Humans,Male,Sequence Analysis, DNA,Sequence Analysis, DNA: methods,Sequence Analysis, DNA: statistics \& numerical dat,Synteny,Y Chromosome,Y Chromosome: genetics},
-month = jan,
-number = {4},
-pages = {R42},
-pmid = {19393038},
-title = {{A whole-genome assembly of the domestic cow, Bos taurus.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2688933\&tool=pmcentrez\&rendertype=abstract},
-volume = {10},
-year = {2009}
-}
-@article{Gao,
-author = {Gao, H. and Groote, J.F. and Hesselink, W.H.},
-doi = {10.1109/IPDPS.2004.1302969},
-file = {:home/gus/Documents/Mendeley Desktop/Gao, Groote, Hesselink\_Unknown\_Almost wait-free resizable hashtables.pdf:pdf},
-isbn = {0-7695-2132-0},
-journal = {18th International Parallel and Distributed Processing Symposium, 2004. Proceedings.},
-pages = {50--58},
-publisher = {Ieee},
-title = {{Almost wait-free resizable hashtables}},
-url = {http://ieeexplore.ieee.org/lpdocs/epic03/wrapper.htm?arnumber=1302969}
-}
-@article{medvedev2007computability,
-author = {Medvedev, P. and Georgiou, K. and Myers, G. and Brudno, M.},
-file = {:home/gus/Documents/Mendeley Desktop/Medvedev et al.\_2007\_Computability of models for sequence assembly.pdf:pdf},
-journal = {Algorithms in Bioinformatics},
-pages = {289--301},
-publisher = {Springer},
-title = {{Computability of models for sequence assembly}},
-url = {http://www.springerlink.com/index/H711368771048H21.pdf},
-year = {2007}
-}
-@article{Butler2008,
-abstract = {New DNA sequencing technologies deliver data at dramatically lower costs but demand new analytical methods to take full advantage of the very short reads that they produce. We provide an initial, theoretical solution to the challenge of de novo assembly from whole-genome shotgun "microreads." For 11 genomes of sizes up to 39 Mb, we generated high-quality assemblies from 80x coverage by paired 30-base simulated reads modeled after real Illumina-Solexa reads. The bacterial genomes of Campylobacter jejuni and Escherichia coli assemble optimally, yielding single perfect contigs, and larger genomes yield assemblies that are highly connected and accurate. Assemblies are presented in a graph form that retains intrinsic ambiguities such as those arising from polymorphism, thereby providing information that has been absent from previous genome assemblies. For both C. jejuni and E. coli, this assembly graph is a single edge encompassing the entire genome. Larger genomes produce more complicated graphs, but the vast majority of the bases in their assemblies are present in long edges that are nearly always perfect. We describe a general method for genome assembly that can be applied to all types of DNA sequence data, not only short read data, but also conventional sequence reads.},
-author = {Butler, Jonathan and MacCallum, Iain and Kleber, Michael and Shlyakhter, Ilya a and Belmonte, Matthew K and Lander, Eric S and Nusbaum, Chad and Jaffe, David B},
-doi = {10.1101/gr.7337908},
-file = {:home/gus/Documents/Mendeley Desktop/Butler et al.\_2008\_ALLPATHS de novo assembly of whole-genome shotgun microreads.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Campylobacter jejuni,Campylobacter jejuni: genetics,Computational Biology,Computational Biology: methods,Computer Simulation,Escherichia coli,Escherichia coli: genetics,Genome, Bacterial,Genome, Bacterial: genetics,Reproducibility of Results,Sequence Analysis, DNA,Sequence Analysis, DNA: methods,Sequence Analysis, DNA: standards},
-month = may,
-number = {5},
-pages = {810--20},
-pmid = {18340039},
-title = {{ALLPATHS: de novo assembly of whole-genome shotgun microreads.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2336810\&tool=pmcentrez\&rendertype=abstract},
-volume = {18},
-year = {2008}
-}
-@article{Miller:2010ys,
-abstract = {The emergence of next-generation sequencing platforms led to resurgence of research in whole-genome shotgun assembly algorithms and software. DNA sequencing data from the Roche 454, Illumina/Solexa, and ABI SOLiD platforms typically present shorter read lengths, higher coverage, and different error profiles compared with Sanger sequencing data. Since 2005, several assembly software packages have been created or revised specifically for de novo assembly of next-generation sequencing data. This review summarizes and compares the published descriptions of packages named SSAKE, SHARCGS, VCAKE, Newbler, Celera Assembler, Euler, Velvet, ABySS, AllPaths, and SOAPdenovo. More generally, it compares the two standard methods known as the de Bruijn graph approach and the overlap/layout/consensus approach to assembly.},
-author = {Miller, Jason R and Koren, Sergey and Sutton, Granger},
-doi = {10.1016/j.ygeno.2010.03.001},
-journal = {Genomics},
-month = jun,
-number = {6},
-pages = {315--327},
-pmid = {20211242},
-title = {{Assembly algorithms for next-generation sequencing data}},
-volume = {95},
-year = {2010}
-}
-@misc{TheMendeleySupportTeam2011a,
-abstract = {A quick introduction to Mendeley. Learn how Mendeley creates your personal digital library, how to organize and annotate documents, how to collaborate and share with colleagues, and how to generate citations and bibliographies.},
-address = {London},
-author = {{The Mendeley Support Team}},
-booktitle = {Mendeley Desktop},
-file = {:home/gus/Documents/Mendeley Desktop/The Mendeley Support Team\_2011\_Getting Started with Mendeley.pdf:pdf},
-keywords = {Mendeley,how-to,user manual},
-pages = {1--16},
-publisher = {Mendeley Ltd.},
-title = {{Getting Started with Mendeley}},
-url = {http://www.mendeley.com},
-year = {2011}
-}
-@article{Reed2004,
-abstract = {A family of probability densities, which has proved useful in modelling the size distributions of various phenomens, including incomes and earnings, human settlement sizes, oil-field volumes and particle sizes, is introduced. The distribution, named herein as the double Pareto-lognormal or dPlN distribution, arises as that of the state of a geometric Brownian motion (GBM), with lognormally distributed initial state, after an exponentially distributed length of time (or equivalently as the distribution of the killed state of such a GBM with constant killing rate). A number of phenomena can be viewed as resulting from such a process (e.g., incomes, settlement sizes), which explains the good fit. Properties of the distribution are derived and estimation methods discussed. The distribution exhibits Paretian power-law) behaviour in both tails, and when plotted on logarithmic axes, its density exhibits hyperbolic-type behaviour.},
-author = {Reed, William J. and Jorgensen, Murray},
-file = {:home/gus/Documents/Mendeley Desktop/Reed, Jorgensen\_2004\_The double Pareto-lognormal distribution—a new parametric model for size distributions.pdf:pdf},
-journal = {Communications in Statistics-Theory \ldots},
-number = {8},
-pages = {1733--1753},
-title = {{The double Pareto-lognormal distribution—a new parametric model for size distributions}},
-url = {http://www.tandfonline.com/doi/abs/10.1081/STA-120037438},
-volume = {33},
-year = {2004}
-}
-@article{michael2004hazard,
-author = {Michael, M.M.},
-file = {:home/gus/Documents/Mendeley Desktop/Michael\_2004\_Hazard pointers Safe memory reclamation for lock-free objects.pdf:pdf},
-journal = {Parallel and Distributed Systems, IEEE Transactions on},
-number = {6},
-pages = {491--504},
-publisher = {IEEE},
-title = {{Hazard pointers: Safe memory reclamation for lock-free objects}},
-url = {http://ieeexplore.ieee.org/xpls/abs\_all.jsp?arnumber=1291819},
-volume = {15},
-year = {2004}
-}
-@article{Phenix2011,
-abstract = {Inferring regulatory and metabolic network models from quantitative genetic interaction data remains a major challenge in systems biology. Here, we present a novel quantitative model for interpreting epistasis within pathways responding to an external signal. The model provides the basis of an experimental method to determine the architecture of such pathways, and establishes a new set of rules to infer the order of genes within them. The method also allows the extraction of quantitative parameters enabling a new level of information to be added to genetic network models. It is applicable to any system where the impact of combinatorial loss-of-function mutations can be quantified with sufficient accuracy. We test the method by conducting a systematic analysis of a thoroughly characterized eukaryotic gene network, the galactose utilization pathway in Saccharomyces cerevisiae. For this purpose, we quantify the effects of single and double gene deletions on two phenotypic traits, fitness and reporter gene expression. We show that applying our method to fitness traits reveals the order of metabolic enzymes and the effects of accumulating metabolic intermediates. Conversely, the analysis of expression traits reveals the order of transcriptional regulatory genes, secondary regulatory signals and their relative strength. Strikingly, when the analyses of the two traits are combined, the method correctly infers ∼80\% of the known relationships without any false positives.},
-author = {Phenix, Hilary and Morin, Katy and Batenchuk, Cory and Parker, Jacob and Abedi, Vida and Yang, Liu and Tepliakova, Lioudmila and Perkins, Theodore J and K\ae rn, Mads},
-doi = {10.1371/journal.pcbi.1002048},
-editor = {Ohler, Uwe},
-file = {:home/gus/Documents/Mendeley Desktop/Phenix et al.\_2011\_Quantitative epistasis analysis and pathway inference from genetic interaction data.pdf:pdf},
-issn = {1553-7358},
-journal = {PLoS computational biology},
-keywords = {Biology,Computational Biology,Functional genomics,Gene expression,Gene regulation,Genomics,Metabolic networks,Molecular genetics,Regulatory networks,Research Article,Signaling networks,Systems biology},
-month = may,
-number = {5},
-pages = {e1002048},
-pmid = {21589890},
-publisher = {Public Library of Science},
-title = {{Quantitative epistasis analysis and pathway inference from genetic interaction data.}},
-url = {http://dx.plos.org/10.1371/journal.pcbi.1002048},
-volume = {7},
-year = {2011}
-}
-@article{Pugh1990,
-author = {Pugh, William},
-doi = {10.1145/78973.78977},
-issn = {00010782},
-journal = {Communications of the ACM},
-keywords = {data structures,searching,trees},
-month = jun,
-number = {6},
-pages = {668--676},
-title = {{Skip lists: a probabilistic alternative to balanced trees}},
-url = {http://dl.acm.org/citation.cfm?id=78973.78977},
-volume = {33},
-year = {1990}
-}
-@inproceedings{Fomitchev2004,
-address = {New York, New York, USA},
-annote = {http://drdobbs.com/parallel/208801371},
-author = {Fomitchev, Mikhail and Ruppert, Eric},
-booktitle = {Proceedings of the twenty-third annual ACM symposium on Principles of distributed computing - PODC '04},
-doi = {10.1145/1011767.1011776},
-file = {:home/gus/Documents/Mendeley Desktop/Fomitchev, Ruppert\_2004\_Lock-free linked lists and skip lists.pdf:pdf},
-isbn = {1581138024},
-keywords = {amortized analysis,analysis,distributed,efficient,fault-tolerant,linked list,lock-free,skip list},
-month = jul,
-pages = {50},
-publisher = {ACM Press},
-title = {{Lock-free linked lists and skip lists}},
-url = {http://dl.acm.org/citation.cfm?id=1011767.1011776},
-year = {2004}
-}
-@article{Au2010,
-abstract = {Alternative splicing is a prevalent post-transcriptional process, which is not only important to normal cellular function but is also involved in human diseases. The newly developed second generation sequencing technique provides high-throughput data (RNA-seq data) to study alternative splicing events in different types of cells. Here, we present a computational method, SpliceMap, to detect splice junctions from RNA-seq data. This method does not depend on any existing annotation of gene structures and is capable of finding novel splice junctions with high sensitivity and specificity. It can handle long reads (50-100 nt) and can exploit paired-read information to improve mapping accuracy. Several parameters are included in the output to indicate the reliability of the predicted junction and help filter out false predictions. We applied SpliceMap to analyze 23 million paired 50-nt reads from human brain tissue. The results show at this depth of sequencing, RNA-seq can support reliable detection of splice junctions except for those that are present at very low level. Compared to current methods, SpliceMap can achieve 12\% higher sensitivity without sacrificing specificity.},
-author = {Au, Kin Fai and Jiang, Hui and Lin, Lan and Xing, Yi and Wong, Wing Hung},
-doi = {10.1093/nar/gkq211},
-file = {:home/gus/Documents/Mendeley Desktop/Au et al.\_2010\_Detection of splice junctions from paired-end RNA-seq data by SpliceMap.pdf:pdf;:home/gus/Documents/Mendeley Desktop/Au et al.\_2010\_Detection of splice junctions from paired-end RNA-seq data by SpliceMap(2).pdf:pdf},
-issn = {1362-4962},
-journal = {Nucleic acids research},
-keywords = {Algorithms,Alternative Splicing,Computational Biology,Computational Biology: methods,Humans,Polymerase Chain Reaction,RNA,RNA Splice Sites,Sequence Analysis,Software},
-month = aug,
-number = {14},
-pages = {4570--8},
-pmid = {20371516},
-title = {{Detection of splice junctions from paired-end RNA-seq data by SpliceMap.}},
-url = {http://nar.oxfordjournals.org/cgi/content/abstract/gkq211v1},
-volume = {38},
-year = {2010}
-}
-@inproceedings{Lin2010,
-address = {New York, New York, USA},
-author = {Lin, Jimmy and Schatz, Michael},
-booktitle = {Proceedings of the Eighth Workshop on Mining and Learning with Graphs - MLG '10},
-doi = {10.1145/1830252.1830263},
-file = {:home/gus/Documents/Mendeley Desktop/Lin, Schatz\_2010\_Design patterns for efficient graph algorithms in MapReduce.pdf:pdf},
-isbn = {9781450302142},
-month = jul,
-pages = {78--85},
-publisher = {ACM Press},
-title = {{Design patterns for efficient graph algorithms in MapReduce}},
-url = {http://dl.acm.org/citation.cfm?id=1830252.1830263},
-year = {2010}
-}
-@book{Colden1755,
-address = {London},
-author = {Colden, Cadwallader},
-edition = {3rd editio},
-file = {:home/gus/Documents/Mendeley Desktop/Colden\_1755\_The History of the Five Indian Nations of Canada.jpeg:jpeg},
-pages = {Vol. II 18--24},
-title = {{The History of the Five Indian Nations of Canada}},
-url = {http://america.eb.com/america/article?articleId=385137\&query=Iroquois},
-year = {1755}
-}
-@article{Zerbino2008,
-abstract = {We have developed a new set of algorithms, collectively called "Velvet," to manipulate de Bruijn graphs for genomic sequence assembly. A de Bruijn graph is a compact representation based on short words (k-mers) that is ideal for high coverage, very short read (25-50 bp) data sets. Applying Velvet to very short reads and paired-ends information only, one can produce contigs of significant length, up to 50-kb N50 length in simulations of prokaryotic data and 3-kb N50 on simulated mammalian BACs. When applied to real Solexa data sets without read pairs, Velvet generated contigs of approximately 8 kb in a prokaryote and 2 kb in a mammalian BAC, in close agreement with our simulated results without read-pair information. Velvet represents a new approach to assembly that can leverage very short reads in combination with read pairs to produce useful assemblies.},
-author = {Zerbino, Daniel R and Birney, Ewan},
-doi = {10.1101/gr.074492.107},
-file = {:home/gus/Documents/Mendeley Desktop/Zerbino, Birney\_2008\_Velvet algorithms for de novo short read assembly using de Bruijn graphs.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Animals,Artificial,Bacterial,Chromosomes,Computational Biology,Computational Biology: methods,Computer Simulation,DNA,DNA: methods,DNA: standards,Genome,Genomics,Human,Humans,Mammals,Mammals: genetics,Sequence Analysis,Streptococcus,Streptococcus: genetics},
-month = may,
-number = {5},
-pages = {821--9},
-pmid = {18349386},
-title = {{Velvet: algorithms for de novo short read assembly using de Bruijn graphs}},
-url = {http://genome.cshlp.org/content/18/5/821.short http://genome.cshlp.org/cgi/content/abstract/18/5/821},
-volume = {18},
-year = {2008}
-}
-@article{Kao2011,
-abstract = {Developing accurate, scalable algorithms to improve data quality is an important computational challenge associated with recent advances in high-throughput sequencing technology. In this study, a novel error-correction algorithm, called ECHO, is introduced for correcting base-call errors in short-reads, without the need of a reference genome. Unlike most previous methods, ECHO does not require the user to specify parameters of which optimal values are typically unknown a priori. ECHO automatically sets the parameters in the assumed model and estimates error characteristics specific to each sequencing run, while maintaining a running time that is within the range of practical use. ECHO is based on a probabilistic model and is able to assign a quality score to each corrected base. Furthermore, it explicitly models heterozygosity in diploid genomes and provides a reference-free method for detecting bases that originated from heterozygous sites. On both real and simulated data, ECHO is able to improve the accuracy of previous error-correction methods by several folds to an order of magnitude, depending on the sequence coverage depth and the position in the read. The improvement is most pronounced toward the end of the read, where previous methods become noticeably less effective. Using a whole-genome yeast data set, it is demonstrated here that ECHO is capable of coping with nonuniform coverage. Also, it is shown that using ECHO to perform error correction as a preprocessing step considerably facilitates de novo assembly, particularly in the case of low-to-moderate sequence coverage depth.},
-author = {Kao, Wei-Chun and Chan, Andrew H and Song, Yun S},
-doi = {10.1101/gr.111351.110},
-file = {:home/gus/Documents/Mendeley Desktop/Kao, Chan, Song\_2011\_ECHO A reference-free short-read error correction algorithm.pdf:pdf;:home/gus/Documents/Mendeley Desktop/Kao, Chan, Song\_2011\_ECHO A reference-free short-read error correction algorithm(2).pdf:pdf},
-issn = {1549-5469},
-journal = {Genome research},
-month = may,
-number = {7},
-pages = {1181--1192},
-pmid = {21482625},
-title = {{ECHO: A reference-free short-read error correction algorithm.}},
-url = {http://genome.cshlp.org/cgi/content/abstract/21/7/1181},
-volume = {21},
-year = {2011}
-}
-@article{Chin2011,
-abstract = {Recent advances in genome technologies and the ensuing outpouring of genomic information related to cancer have accelerated the convergence of discovery science and clinical medicine. Successful examples of translating cancer genomics into therapeutics and diagnostics reinforce its potential to make possible personalized cancer medicine. However, the bottlenecks along the path of converting a genome discovery into a tangible clinical endpoint are numerous and formidable. In this Perspective, we emphasize the importance of establishing the biological relevance of a cancer genomic discovery in realizing its clinical potential and discuss some of the major obstacles to moving from the bench to the bedside.},
-author = {Chin, Lynda and Andersen, Jannik N and Futreal, P Andrew},
-doi = {10.1038/nm.2323},
-file = {:home/gus/Documents/Mendeley Desktop/Chin, Andersen, Futreal\_2011\_Cancer genomics from discovery science to personalized medicine.pdf:pdf},
-issn = {1546-170X},
-journal = {Nature medicine},
-keywords = {Genomics,Humans,Individualized Medicine,Neoplasms,Neoplasms: genetics,Neoplasms: therapy},
-language = {en},
-month = mar,
-number = {3},
-pages = {297--303},
-pmid = {21383744},
-publisher = {Nature Publishing Group},
-title = {{Cancer genomics: from discovery science to personalized medicine.}},
-url = {http://www.nature.com/nm/journal/v17/n3/full/nm.2323.html?WT.ec\_id=NM-201103},
-volume = {17},
-year = {2011}
-}
-@article{Zhao2011,
-author = {Zhao, Z and Yin, J and Li, Y},
-file = {:home/gus/Documents/Mendeley Desktop/Zhao, Yin, Li\_2011\_An efficient hybrid approach to correcting errors in short reads.pdf:pdf},
-journal = {Modeling Decision for Artificial \ldots},
-title = {{An efficient hybrid approach to correcting errors in short reads}},
-url = {http://www.springerlink.com/index/P53757J416772662.pdf},
-year = {2011}
-}
-@article{Li01082009,
-abstract = {Summary: SOAP2 is a significantly improved version of the short oligonucleotide alignment program that both reduces computer memory usage and increases alignment speed at an unprecedented rate. We used a Burrows Wheeler Transformation (BWT) compression index to substitute the seed strategy for indexing the reference sequence in the main memory. We tested it on the whole human genome and found that this new algorithm reduced memory usage from 14.7 to 5.4 GB and improved alignment speed by 20‚\{\"{A}\}\{\`{\i}\}30 times. SOAP2 is compatible with both single- and paired-end reads. Additionally, this tool now supports multiple text and compressed file formats. A consensus builder has also been developed for consensus assembly and SNP detection from alignment of short reads on a reference genome.Availability: http://soap.genomics.org.cnContact: soap@genomics.org.cn},
-author = {Li, Ruiqiang and Yu, Chang and Li, Yingrui and Lam, Tak-Wah and Yiu, Siu-Ming and Kristiansen, Karsten and Wang, Jun},
-doi = {10.1093/bioinformatics/btp336},
-file = {:home/gus/Documents/Mendeley Desktop/Li et al.\_2009\_SOAP2 an improved ultrafast tool for short read alignment.pdf:pdf},
-journal = {Bioinformatics},
-number = {15},
-pages = {1966--1967},
-title = {{SOAP2: an improved ultrafast tool for short read alignment}},
-url = {http://bioinformatics.oxfordjournals.org/content/25/15/1966.abstract},
-volume = {25},
-year = {2009}
-}
-@inproceedings{ferragina2004alphabet,
-author = {Ferragina, P. and Manzini, G. and M\"{a}kinen, V. and Navarro, G.},
-booktitle = {String Processing and Information Retrieval},
-file = {:home/gus/Documents/Mendeley Desktop/Ferragina et al.\_2004\_An alphabet-friendly FM-index.pdf:pdf},
-pages = {228--228},
-publisher = {Springer},
-title = {{An alphabet-friendly FM-index}},
-url = {http://www.springerlink.com/index/P95U67K0XV0X382E.pdf},
-year = {2004}
-}
-@article{Roberts12122004,
-abstract = {Motivation: Comparison of nucleic acid and protein sequences is a fundamental tool of modern bioinformatics. A dominant method of such string matching is the ‘seed-and-extend’ approach, in which occurrences of short subsequences called ‘seeds’ are used to search for potentially longer matches in a large database of sequences. Each such potential match is then checked to see if it extends beyond the seed. To be effective, the seed-and-extend approach needs to catalogue seeds from virtually every substring in the database of search strings. Projects such as mammalian genome assemblies and large-scale protein matching, however, have such large sequence databases that the resulting list of seeds cannot be stored in RAM on a single computer. This significantly slows the matching process.Results: We present a simple and elegant method in which only a small fraction of seeds, called ‘minimizers’, needs to be stored. Using minimizers can speed up string-matching computations by a large factor while missing only a small fraction of the matches found using all seeds.},
-author = {Roberts, Michael and Hayes, Wayne and Hunt, Brian R and Mount, Stephen M and Yorke, James A},
-doi = {10.1093/bioinformatics/bth408},
-journal = {Bioinformatics},
-number = {18},
-pages = {3363--3369},
-title = {{Reducing storage requirements for biological sequence comparison}},
-url = {http://bioinformatics.oxfordjournals.org/content/20/18/3363.abstract},
-volume = {20},
-year = {2004}
-}
-@article{Richter2008,
-abstract = {The new research field of metagenomics is providing exciting insights into various, previously unclassified ecological systems. Next-generation sequencing technologies are producing a rapid increase of environmental data in public databases. There is great need for specialized software solutions and statistical methods for dealing with complex metagenome data sets.},
-author = {Richter, Daniel C and Ott, Felix and Auch, Alexander F and Schmid, Ramona and Huson, Daniel H},
-doi = {10.1371/journal.pone.0003373},
-editor = {Field, Dawn},
-file = {:home/gus/Documents/Mendeley Desktop/Richter et al.\_2008\_MetaSim a sequencing simulator for genomics and metagenomics.pdf:pdf},
-issn = {1932-6203},
-journal = {PloS one},
-keywords = {Databases, Genetic,Genomics,Models, Theoretical,User-Computer Interface},
-month = jan,
-number = {10},
-pages = {e3373},
-pmid = {18841204},
-publisher = {Public Library of Science},
-title = {{MetaSim: a sequencing simulator for genomics and metagenomics.}},
-url = {http://dx.plos.org/10.1371/journal.pone.0003373},
-volume = {3},
-year = {2008}
-}
-@article{Brown2012,
-abstract = {Deep shotgun sequencing and analysis of genomes, transcriptomes, amplified single-cell genomes, and metagenomes enable the sensitive investigation of a wide range of biological phenomena. However, it is increasingly difficult to deal with the volume of data emerging from deep short-read sequencers, in part because of random and systematic sampling variation as well as a high sequencing error rate. These challenges have led to the development of entire new classes of short-read mapping tools, as well as new \{$\backslash$em de novo\} assemblers. Even newer assembly strategies for dealing with transcriptomes, single-cell genomes, and metagenomes have also emerged. Despite these advances, algorithms and compute capacity continue to be challenged by the continued improvements in sequencing technology throughput. We here describe an approach we term digital normalization, a single-pass computational algorithm that discards redundant data and both sampling variation and the number of errors present in deep sequencing data sets. Digital normalization substantially reduces the size of data sets and accordingly decreases the memory and time requirements for \{$\backslash$em de novo\} sequence assembly, all without significantly impacting content of the generated contigs. In doing so, it converts high random coverage to low systematic coverage. Digital normalization is an effective and efficient approach to normalizing coverage, removing errors, and reducing data set size for shotgun sequencing data sets. It is particularly useful for reducing the compute requirements for \{$\backslash$em de novo\} sequence assembly. We demonstrate this for the assembly of microbial genomes, amplified single-cell genomic data, and transcriptomic data. The software is freely available for use and modification.},
-annote = {I am skeptical about this paper:
-
-        
-- As they mention at the end of the paper, they only tested on bacterial genome with low amount of repeats. This is conceptually a big drawback for a paper whose purpose is to reduce the amount of data to tackle large projects. Assembling E. coli is not a challenge anymore.
-- Given that the coverage of most part of the genome is now made uniform, we lost a big indicator to detect repeat regions. The Celera assembler and others will likely collapse many copies of repeat regions and have many more mis-assemblies as a result. Which does not show up in the E. coli dataset.
-
-        
-- I disagree with the claim that "Digital normalization retains information while discarding both data and errors" is beneficial. When looking at their own data (Table 1.) I see the following trend. For a mer length of k, one base error creates usually around k erroneous k-mers. Hence the error rate can be estimated as the number of k-mers in the reads minus the number of true k-mers, divided by the number of reads. For E. coli in Table 1 they kept a tenth of the reads while reducing the number of erroneous k-mers by only half. Hence the error rate in the reads that are kept is approximately 5 times HIGHER.  This trend of higher error rate in the kept reads is even worse in the three-pass procedure (Table 2.).
-
-        
-They reduced the number of erroneous k-mers in absolute value but increased it in proportion. Is it really a good operation?
-
-        
-Actually, based on this, I would go the other way around. I would count k-mers in the remaining 90\% of the reads (the discarded ones), which have a  lower error rate (approximately half the original error rate). I would then used these k-mers to do error correction on ALL of the reads.},
-archivePrefix = {arXiv},
-arxivId = {1203.4802},
-author = {Brown, C. Titus and Howe, Adina and Zhang, Qingpeng and Pyrkosz, Alexis B. and Brom, Timothy H.},
-eprint = {1203.4802},
-file = {:home/gus/Documents/Mendeley Desktop/Brown et al.\_2012\_A single pass approach to reducing sampling variation, removing errors, and scaling \{em de novo\} assembly of shotgun sequences.pdf:pdf},
-month = mar,
-title = {{A single pass approach to reducing sampling variation, removing errors, and scaling \{$\backslash$em de novo\} assembly of shotgun sequences}},
-url = {http://arxiv.org/abs/1203.4802},
-year = {2012}
-}
-@article{Pugh1990,
-author = {Pugh, William},
-doi = {10.1145/78973.78977},
-file = {:home/gus/Documents/Mendeley Desktop//Pugh\_1990\_Skip lists a probabilistic alternative to balanced trees.pdf:pdf},
-issn = {00010782},
-journal = {Communications of the ACM},
-keywords = {data structures,searching,trees},
-month = jun,
-number = {6},
-pages = {668--676},
-publisher = {ACM},
-title = {{Skip lists: a probabilistic alternative to balanced trees}},
-url = {http://dl.acm.org/citation.cfm?id=78973.78977 http://dl.acm.org/citation.cfm?id=78977,},
-volume = {33},
-year = {1990}
-}
-@misc{TheMendeleySupportTeam2011,
-abstract = {A quick introduction to Mendeley. Learn how Mendeley creates your personal digital library, how to organize and annotate documents, how to collaborate and share with colleagues, and how to generate citations and bibliographies.},
-address = {London},
-author = {{The Mendeley Support Team}},
-booktitle = {Mendeley Desktop},
-file = {:home/gus/Documents/Mendeley Desktop/The Mendeley Support Team\_2011\_Getting Started with Mendeley.pdf:pdf},
-keywords = {Mendeley,how-to,user manual},
-pages = {1--16},
-publisher = {Mendeley Ltd.},
-title = {{Getting Started with Mendeley}},
-url = {http://www.mendeley.com},
-year = {2011}
-}
-@article{Li2009,
-abstract = {The enormous amount of short reads generated by the new DNA sequencing technologies call for the development of fast and accurate read alignment programs. A first generation of hash table-based methods has been developed, including MAQ, which is accurate, feature rich and fast enough to align short reads from a single individual. However, MAQ does not support gapped alignment for single-end reads, which makes it unsuitable for alignment of longer reads where indels may occur frequently. The speed of MAQ is also a concern when the alignment is scaled up to the resequencing of hundreds of individuals.},
-author = {Li, Heng and Durbin, Richard},
-doi = {10.1093/bioinformatics/btp324},
-file = {:home/gus/Documents/Mendeley Desktop/Li, Durbin\_2009\_Fast and accurate short read alignment with Burrows-Wheeler transform.pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-keywords = {Algorithms,Genomics,Genomics: methods,Sequence Alignment,Sequence Alignment: methods,Sequence Analysis, DNA,Sequence Analysis, DNA: methods,Software},
-month = jul,
-number = {14},
-pages = {1754--60},
-pmid = {19451168},
-title = {{Fast and accurate short read alignment with Burrows-Wheeler transform.}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/25/14/1754},
-volume = {25},
-year = {2009}
-}
-@article{Maccallum2009,
-abstract = {We demonstrate that genome sequences approaching finished quality can be generated from short paired reads. Using 36 base (fragment) and 26 base (jumping) reads from five microbial genomes of varied GC composition and sizes up to 40 Mb, ALLPATHS2 generated assemblies with long, accurate contigs and scaffolds. Velvet and EULER-SR were less accurate. For example, for Escherichia coli, the fraction of 10-kb stretches that were perfect was 99.8\% (ALLPATHS2), 68.7\% (Velvet), and 42.1\% (EULER-SR).},
-author = {Maccallum, Iain and Przybylski, Dariusz and Gnerre, Sante and Burton, Joshua and Shlyakhter, Ilya and Gnirke, Andreas and Malek, Joel and McKernan, Kevin and Ranade, Swati and Shea, Terrance P and Williams, Louise and Young, Sarah and Nusbaum, Chad and Jaffe, David B},
-doi = {10.1186/gb-2009-10-10-r103},
-file = {:home/gus/Documents/Mendeley Desktop//Maccallum et al.\_2009\_ALLPATHS 2 small genomes assembled accurately and with high continuity from short paired reads.pdf:pdf},
-issn = {1465-6914},
-journal = {Genome biology},
-keywords = {Bacteria,Bacteria: genetics,Base Pairing,Base Pairing: genetics,Fungi,Fungi: genetics,Genome,Genome: genetics,Genomics,Genomics: methods,Reproducibility of Results,Software},
-month = jan,
-number = {10},
-pages = {R103},
-pmid = {19796385},
-title = {{ALLPATHS 2: small genomes assembled accurately and with high continuity from short paired reads.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2784318\&tool=pmcentrez\&rendertype=abstract},
-volume = {10},
-year = {2009}
-}
-@article{Heyn2012,
-author = {Heyn, Holger and Li, Ning and Ferreira, Humberto J and Moran, Sebastian and Pisano, David G and Gomez, Antonio and Diez, Javier},
-doi = {10.1073/pnas.1120658109},
-file = {:home/gus/Documents/Mendeley Desktop/Heyn et al.\_2012\_Distinct DNA methylomes of newborns and centenarians.pdf:pdf},
-journal = {PNAS},
-title = {{Distinct DNA methylomes of newborns and centenarians}},
-year = {2012}
-}
-@article{PETER1991,
-abstract = {We extend the notion of randomness (in the version introduced by Schnorr) to computable Probability Spaces and compare it to a dynamical notion of randomness: typicality. Roughly, a point is typical for some dynamic, if it follows the statistical behavior of the system (Birkhoff’s pointwise ergodic theorem). We prove that a point is Schnorr random if and only if it is typical for every mixing computable dynamics. To prove the result we develop some tools for the theory of computable probability spaces (for example, morphisms) that are expected to have other applications.},
-author = {PETER, GACS and HOYRUP, MATHIEU and CRISTOBAL, ROJAS},
-file = {:home/gus/Documents/Mendeley Desktop/PETER, HOYRUP, CRISTOBAL\_1991\_Randomness on computable probability spaces—a dynamical point of view.pdf:pdf},
-journal = {Theory of Computing Systems},
-keywords = {Birkhoff’s ergodic theorem,Computability,Schnorr Randomness,computable measures},
-mendeley-tags = {Computability},
-pages = {1--18},
-title = {{Randomness on computable probability spaces—a dynamical point of view}},
-url = {http://www.springerlink.com/index/3q774874623m0nm6.pdf},
-year = {1991}
-}
-@article{Ding2012,
-author = {Ding, Li and Ley, Timothy J. and Larson, David E. and Miller, Christopher A. and Koboldt, Daniel C. and Welch, John S. and Ritchey, Julie K. and Young, Margaret A. and Lamprecht, Tamara and McLellan, Michael D. and McMichael, Joshua F. and Wallis, John W. and Lu, Charles and Shen, Dong and Harris, Christopher C. and Dooling, David J. and Fulton, Robert S. and Fulton, Lucinda L. and Chen, Ken and Schmidt, Heather and Kalicki-Veizer, Joelle and Magrini, Vincent J. and Cook, Lisa and McGrath, Sean D. and Vickery, Tammi L. and Wendl, Michael C. and Heath, Sharon and Watson, Mark A. and Link, Daniel C. and Tomasson, Michael H. and Shannon, William D. and Payton, Jacqueline E. and Kulkarni, Shashikant and Westervelt, Peter and Walter, Matthew J. and Graubert, Timothy A. and Mardis, Elaine R. and Wilson, Richard K. and DiPersio, John F.},
-doi = {10.1038/nature10738},
-file = {:home/gus/Documents/Mendeley Desktop/Ding et al.\_2012\_Clonal evolution in relapsed acute myeloid leukaemia revealed by whole-genome sequencing(2).pdf:pdf;:home/gus/Documents/Mendeley Desktop/Ding et al.\_2012\_Clonal evolution in relapsed acute myeloid leukaemia revealed by whole-genome sequencing.pdf:pdf},
-issn = {0028-0836},
-journal = {Nature},
-month = jan,
-number = {7382},
-pages = {506--510},
-publisher = {Nature Publishing Group, a division of Macmillan Publishers Limited. All Rights Reserved.},
-shorttitle = {Nature},
-title = {{Clonal evolution in relapsed acute myeloid leukaemia revealed by whole-genome sequencing}},
-url = {http://dx.doi.org/10.1038/nature10738},
-volume = {481},
-year = {2012}
-}
-@article{Jaffe2003,
-abstract = {We previously described the whole-genome assembly program Arachne, presenting assemblies of simulated data for small to mid-sized genomes. Here we describe algorithmic adaptations to the program, allowing for assembly of mammalian-size genomes, and also improving the assembly of smaller genomes. Three principal changes were simultaneously made and applied to the assembly of the mouse genome, during a six-month period of development: (1) Supercontigs (scaffolds) were iteratively broken and rejoined using several criteria, yielding a 64-fold increase in length (N50), and apparent elimination of all global misjoins; (2) gaps between contigs in supercontigs were filled (partially or completely) by insertion of reads, as suggested by pairing within the supercontig, increasing the N50 contig length by 50\%; (3) memory usage was reduced fourfold. The outcome of this mouse assembly and its analysis are described in (Mouse Genome Sequencing Consortium 2002).},
-author = {Jaffe, David B and Butler, Jonathan and Gnerre, Sante and Mauceli, Evan and Lindblad-Toh, Kerstin and Mesirov, Jill P and Zody, Michael C and Lander, Eric S},
-doi = {10.1101/gr.828403},
-file = {:home/gus/Documents/Mendeley Desktop/Jaffe et al.\_2003\_Whole-genome sequence assembly for mammalian genomes Arachne 2.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Animals,Computational Biology,Computational Biology: methods,Contig Mapping,Contig Mapping: methods,Genome,Humans,Mice,Software},
-month = jan,
-number = {1},
-pages = {91--6},
-pmid = {12529310},
-title = {{Whole-genome sequence assembly for mammalian genomes: Arachne 2.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=430950\&tool=pmcentrez\&rendertype=abstract},
-volume = {13},
-year = {2003}
-}
-@article{Koren2007,
-abstract = {Protein-protein interaction (PPI) networks have become prevalent recently as high-throughput experiment data has become available. Many network growth models have been proposed to reproduce the properties of the networks. We present a stochastic sampling method for capturing network topology properties and use it to infer the model that best matches the observed topology. We apply the method to three real networks, Caenorhabditis elegans, Drosophila melanogaster, and Saccharomyces cerevisiae. We show that using the current protein-interaction networks, the models are not consistent across organisms.},
-author = {Koren, Sergey and Mar\c{c}ais, Guillaume},
-file = {:home/gus/Documents/Mendeley Desktop/Koren, Mar\c{c}ais\_2007\_Network Comparison Using Stochastic Sampling and its Applications.pdf:pdf},
-keywords = {PPI,Random walks},
-pages = {1--8},
-title = {{Network Comparison Using Stochastic Sampling and its Applications}},
-year = {2007}
-}
-@article{Peterlongo2011,
-abstract = {Background: The analysis of next-generation sequencing data from large genomes is a timely research topic. Sequencers are producing billions of short sequence fragments from newly sequenced organisms. Computational methods for reconstructing sequences (whole-genome assemblers) are typically employed to process such data. However, one of the main drawback of these methods is the high memory requirement. Results: We present Mapsembler, an iterative targeted assembler which processes large datasets of reads on commodity hardware. Mapsembler checks for the presence of given regions of interest in the reads and reconstructs their neighborhood, either as a plain sequence (consensus) or as a graph (full sequence structure). We introduce new algorithms to retrieve homologues of a sequence from reads and construct an extension graph. Conclusions: Mapsembler is the rst software that enables de novo discovery around a region of interest of gene homologues, SNPs, exon skipping as well as other structural events, directly from raw sequencing reads. Compared to traditional assembly software, memory requirement and execution time of Mapsembler are considerably lower, as data indexing is localized. Mapsembler can be used at http://mapsembler.genouest.org},
-author = {Peterlongo, Pierre and Chikhi, Rayan},
-file = {:home/gus/Documents/Mendeley Desktop/Peterlongo, Chikhi\_2011\_Mapsembler, targeted assembly of larges genomes on a desktop computer.pdf:pdf},
-keywords = {NGS,algorithms,bioinformatics,genome,light memory usage,targeted assembly},
-month = mar,
-title = {{Mapsembler, targeted assembly of larges genomes on a desktop computer}},
-url = {http://hal.inria.fr/inria-00577218/ http://hal.inria.fr/docs/00/57/72/18/PDF/RR-7565.pdf},
-year = {2011}
-}
-@article{Nagaraj2007,
-abstract = {Expressed sequence tag (EST) sequencing projects are underway for numerous organisms, generating millions of short, single-pass nucleotide sequence reads, accumulating in EST databases. Extensive computational strategies have been developed to organize and analyse both small- and large-scale EST data for gene discovery, transcript and single nucleotide polymorphism analysis as well as functional annotation of putative gene products. We provide an overview of the significance of ESTs in the genomic era, their properties and the applications of ESTs. Methods adopted for each step of EST analysis by various research groups have been compared. Challenges that lie ahead in organizing and analysing the ever increasing EST data have also been identified. The most appropriate software tools for EST pre-processing, clustering and assembly, database matching and functional annotation have been compiled (available online from http://biolinfo.org/EST). We propose a road map for EST analysis to accelerate the effective analyses of EST data sets. An investigation of EST analysis platforms reveals that they all terminate prior to downstream functional annotation including gene ontologies, motif/pattern analysis and pathway mapping.},
-author = {Nagaraj, Shivashankar H and Gasser, Robin B and Ranganathan, Shoba},
-doi = {10.1093/bib/bbl015},
-file = {:home/gus/Documents/Mendeley Desktop/Nagaraj, Gasser, Ranganathan\_2007\_A hitchhiker's guide to expressed sequence tag (EST) analysis.pdf:pdf;:home/gus/Documents/Mendeley Desktop/Nagaraj, Gasser, Ranganathan\_2007\_A hitchhiker's guide to expressed sequence tag (EST) analysis(2).pdf:pdf},
-issn = {1467-5463},
-journal = {Briefings in bioinformatics},
-keywords = {Animals,Complementary,Complementary: chemistry,Consensus Sequence,Consensus Sequence: genetics,DNA,Databases,Expressed Sequence Tags,Genetic,Genetic: standards,Genomics,Genomics: methods,Humans,Nucleic Acid,Nucleic Acid: standards,RNA,Software,Untranslated Regions,Untranslated Regions: chemistry},
-mendeley-tags = {RNA},
-month = jan,
-number = {1},
-pages = {6--21},
-pmid = {16772268},
-title = {{A hitchhiker's guide to expressed sequence tag (EST) analysis.}},
-url = {http://bib.oxfordjournals.org/cgi/content/abstract/8/1/6},
-volume = {8},
-year = {2007}
-}
-@article{Maccallum:2009vn,
-abstract = {We demonstrate that genome sequences approaching finished quality can be generated from short paired reads. Using 36 base (fragment) and 26 base (jumping) reads from five microbial genomes of varied GC composition and sizes up to 40 Mb, ALLPATHS2 generated assemblies with long, accurate contigs and scaffolds. Velvet and EULER-SR were less accurate. For example, for Escherichia coli, the fraction of 10-kb stretches that were perfect was 99.8\% (ALLPATHS2), 68.7\% (Velvet), and 42.1\% (EULER-SR).},
-author = {Maccallum, Iain and Przybylski, Dariusz and Gnerre, Sante and Burton, Joshua and Shlyakhter, Ilya and Gnirke, Andreas and Malek, Joel and McKernan, Kevin and Ranade, Swati and Shea, Terrance P and Williams, Louise and Young, Sarah and Nusbaum, Chad and Jaffe, David B},
-doi = {10.1186/gb-2009-10-10-r103},
-file = {:home/gus/Documents/Mendeley Desktop//Maccallum et al.\_2009\_ALLPATHS 2 small genomes assembled accurately and with high continuity from short paired reads.pdf:pdf},
-journal = {Genome Biol},
-number = {10},
-pages = {R103},
-pmid = {19796385},
-title = {{ALLPATHS 2: small genomes assembled accurately and with high continuity from short paired reads}},
-volume = {10},
-year = {2009}
-}
-@article{Yang2011,
-abstract = {High-throughput short read sequencing is revolutionizing genomics and systems biology research by enabling cost-effective deep coverage sequencing of genomes and transcriptomes. Error detection and correction are crucial to many short read sequencing applications including de novo genome sequencing, genome resequencing, and digital gene expression analysis. Short read error detection is typically carried out by counting the observed frequencies of kmers in reads and validating those with frequencies exceeding a threshold. In case of genomes with high repeat content, an erroneous kmer may be frequently observed if it has few nucleotide differences with valid kmers with multiple occurrences in the genome. Error detection and correction were mostly applied to genomes with low repeat content and this remains a challenging problem for genomes with high repeat content.},
-author = {Yang, Xiao and Aluru, Srinivas and Dorman, Karin S},
-doi = {10.1186/1471-2105-12-S1-S52},
-file = {:home/gus/Documents/Mendeley Desktop//Yang, Aluru, Dorman\_2011\_Repeat-aware modeling and correction of short read errors.pdf:pdf},
-issn = {1471-2105},
-journal = {BMC bioinformatics},
-keywords = {Algorithms,Computational Biology,Computational Biology: methods,Genomics,Genomics: methods,High-Throughput Nucleotide Sequencing,High-Throughput Nucleotide Sequencing: methods,Likelihood Functions,Models,Software,Statistical},
-month = jan,
-number = {Suppl 1},
-pages = {S52},
-pmid = {21342585},
-title = {{Repeat-aware modeling and correction of short read errors.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=3044310\&tool=pmcentrez\&rendertype=abstract http://www.biomedcentral.com/1471-2105/12/S1/S52},
-volume = {12 Suppl 1},
-year = {2011}
-}
-@incollection{springerlink:10.1007/978-3-642-23038-7_21,
-annote = {10.1007/978-3-642-23038-7\_21},
-author = {Patro, Rob and Sefer, Emre and Malin, Justin and Mar\c{c}ais, Guillaume and Navlakha, Saket and Kingsford, Carl},
-booktitle = {Algorithms in Bioinformatics},
-editor = {Przytycka, Teresa and Sagot, Marie-France},
-file = {:home/gus/Documents/Mendeley Desktop/Patro et al.\_2011\_Parsimonious Reconstruction of Network Evolution.pdf:pdf},
-isbn = {978-3-642-23037-0},
-pages = {237--249},
-publisher = {Springer Berlin / Heidelberg},
-series = {Lecture Notes in Computer Science},
-title = {{Parsimonious Reconstruction of Network Evolution}},
-url = {http://dx.doi.org/10.1007/978-3-642-23038-7\_21},
-volume = {6833},
-year = {2011}
-}
-@article{Rumble2009,
-abstract = {The development of Next Generation Sequencing technologies, capable of sequencing hundreds of millions of short reads (25-70 bp each) in a single run, is opening the door to population genomic studies of non-model species. In this paper we present SHRiMP - the SHort Read Mapping Package: a set of algorithms and methods to map short reads to a genome, even in the presence of a large amount of polymorphism. Our method is based upon a fast read mapping technique, separate thorough alignment methods for regular letter-space as well as AB SOLiD (color-space) reads, and a statistical model for false positive hits. We use SHRiMP to map reads from a newly sequenced Ciona savignyi individual to the reference genome. We demonstrate that SHRiMP can accurately map reads to this highly polymorphic genome, while confirming high heterozygosity of C. savignyi in this second individual. SHRiMP is freely available at http://compbio.cs.toronto.edu/shrimp.},
-author = {Rumble, Stephen M and Lacroute, Phil and Dalca, Adrian V and Fiume, Marc and Sidow, Arend and Brudno, Michael},
-doi = {10.1371/journal.pcbi.1000386},
-file = {:home/gus/Documents/Mendeley Desktop/Rumble et al.\_2009\_SHRiMP accurate mapping of short color-space reads.pdf:pdf},
-issn = {1553-7358},
-journal = {PLoS computational biology},
-keywords = {Algorithms,Animals,Chromosome Mapping,Chromosome Mapping: methods,Computer Simulation,Models, Statistical,Reproducibility of Results,Sequence Alignment,Sequence Alignment: methods,Sequence Analysis, DNA,Sequence Analysis, DNA: methods,Software,Urochordata,Urochordata: genetics},
-month = may,
-number = {5},
-pages = {e1000386},
-pmid = {19461883},
-title = {{SHRiMP: accurate mapping of short color-space reads.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2678294\&tool=pmcentrez\&rendertype=abstract},
-volume = {5},
-year = {2009}
-}
-@article{Simpson2010,
-abstract = {MOTIVATION: Sequence assembly is a difficult problem whose importance has grown again recently as the cost of sequencing has dramatically dropped. Most new sequence assembly software has started by building a de Bruijn graph, avoiding the overlap-based methods used previously because of the computational cost and complexity of these with very large numbers of short reads. Here, we show how to use suffix array-based methods that have formed the basis of recent very fast sequence mapping algorithms to find overlaps and generate assembly string graphs asymptotically faster than previously described algorithms. RESULTS: Standard overlap assembly methods have time complexity O(N(2)), where N is the sum of the lengths of the reads. We use the Ferragina-Manzini index (FM-index) derived from the Burrows-Wheeler transform to find overlaps of length at least tau among a set of reads. As well as an approach that finds all overlaps then implements transitive reduction to produce a string graph, we show how to output directly only the irreducible overlaps, significantly shrinking memory requirements and reducing compute time to O(N), independent of depth. Overlap-based assembly methods naturally handle mixed length read sets, including capillary reads or long reads promised by the third generation sequencing technologies. The algorithms we present here pave the way for overlap-based assembly approaches to be developed that scale to whole vertebrate genome de novo assembly.},
-author = {Simpson, Jared T and Durbin, Richard},
-doi = {10.1093/bioinformatics/btq217},
-file = {:home/gus/Documents/Mendeley Desktop/Simpson, Durbin\_2010\_Efficient construction of an assembly string graph using the FM-index.pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-keywords = {Algorithms,Genomics,Genomics: methods,Sequence Analysis, DNA,Sequence Analysis, DNA: methods,Software},
-month = jun,
-number = {12},
-pages = {i367--73},
-pmid = {20529929},
-title = {{Efficient construction of an assembly string graph using the FM-index.}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/26/12/i367},
-volume = {26},
-year = {2010}
-}
-@article{Kashtan2005,
-abstract = {Biological networks have an inherent simplicity: they are modular with a design that can be separated into units that perform almost independently. Furthermore, they show reuse of recurring patterns termed network motifs. Little is known about the evolutionary origin of these properties. Current models of biological evolution typically produce networks that are highly nonmodular and lack understandable motifs. Here, we suggest a possible explanation for the origin of modularity and network motifs in biology. We use standard evolutionary algorithms to evolve networks. A key feature in this study is evolution under an environment (evolutionary goal) that changes in a modular fashion. That is, we repeatedly switch between several goals, each made of a different combination of subgoals. We find that such "modularly varying goals" lead to the spontaneous evolution of modular network structure and network motifs. The resulting networks rapidly evolve to satisfy each of the different goals. Such switching between related goals may represent biological evolution in a changing environment that requires different combinations of a set of basic biological functions. The present study may shed light on the evolutionary forces that promote structural simplicity in biological networks and offers ways to improve the evolutionary design of engineered systems.},
-author = {Kashtan, Nadav and Alon, Uri},
-doi = {10.1073/pnas.0503610102},
-file = {:home/gus/Documents/Mendeley Desktop/Kashtan, Alon\_2005\_Spontaneous evolution of modularity and network motifs.pdf:pdf},
-issn = {0027-8424},
-journal = {Proceedings of the National Academy of Sciences of the United States of America},
-keywords = {Algorithms,Biological Evolution,Computer Simulation,Neural Networks (Computer)},
-month = sep,
-number = {39},
-pages = {13773--8},
-pmid = {16174729},
-title = {{Spontaneous evolution of modularity and network motifs.}},
-url = {http://www.pnas.org/cgi/content/abstract/102/39/13773},
-volume = {102},
-year = {2005}
-}
-@article{Li2011,
-author = {Li, Yingrui and Zheng, Hancheng and Luo, Ruibang and Wu, Honglong and Zhu, Hongmei and Li, Ruiqiang and Cao, Hongzhi and Wu, Boxin and Huang, Shujia and Shao, Haojing and Ma, Hanzhou and Zhang, Fan and Feng, Shuijian and Zhang, Wei and Du, Hongli and Tian, Geng and Li, Jingxiang and Zhang, Xiuqing and Li, Songgang and Bolund, Lars and Kristiansen, Karsten and de Smith, Adam J and Blakemore, Alexandra I F and Coin, Lachlan J M and Yang, Huanming and Wang, Jian and Wang, Jun},
-doi = {10.1038/nbt.1904},
-file = {:home/gus/Documents/Mendeley Desktop/Li et al.\_2011\_Structural variation in two human genomes mapped at single-nucleotide resolution by whole genome de novo assembly.pdf:pdf},
-issn = {1087-0156},
-journal = {Nature Biotechnology},
-month = jul,
-number = {8},
-pages = {723--730},
-publisher = {Nature Publishing Group, a division of Macmillan Publishers Limited. All Rights Reserved.},
-shorttitle = {Nat Biotech},
-title = {{Structural variation in two human genomes mapped at single-nucleotide resolution by whole genome de novo assembly}},
-url = {http://dx.doi.org/10.1038/nbt.1904},
-volume = {29},
-year = {2011}
-}
-@article{Gnerre:2011zr,
-abstract = {Massively parallel DNA sequencing technologies are revolutionizing genomics by making it possible to generate billions of relatively short (\~{}100-base) sequence reads at very low cost. Whereas such data can be readily used for a wide range of biomedical applications, it has proven difficult to use them to generate high-quality de novo genome assemblies of large, repeat-rich vertebrate genomes. To date, the genome assemblies generated from such data have fallen far short of those obtained with the older (but much more expensive) capillary-based sequencing approach. Here, we report the development of an algorithm for genome assembly, ALLPATHS-LG, and its application to massively parallel DNA sequence data from the human and mouse genomes, generated on the Illumina platform. The resulting draft genome assemblies have good accuracy, short-range contiguity, long-range connectivity, and coverage of the genome. In particular, the base accuracy is high (≥99.95\%) and the scaffold sizes (N50 size = 11.5 Mb for human and 7.2 Mb for mouse) approach those obtained with capillary-based sequencing. The combination of improved sequencing technology and improved computational methods should now make it possible to increase dramatically the de novo sequencing of large genomes. The ALLPATHS-LG program is available at http://www.broadinstitute.org/science/programs/genome-biology/crd.},
-annote = {        From Duplicate 2 (                           High-quality draft assemblies of mammalian genomes from massively parallel sequence data                         - Gnerre, Sante; Maccallum, Iain; Przybylski, Dariusz; Ribeiro, Filipe J; Burton, Joshua N; Walker, Bruce J; Sharpe, Ted; Hall, Giles; Shea, Terrance P; Sykes, Sean; Berlin, Aaron M; Aird, Daniel; Costello, Maura; Daza, Riza; Williams, Louise; Nicol, Robert; Gnirke, Andreas; Nusbaum, Chad; Lander, Eric S; Jaffe, David B )
-                
-        
-        
-      },
-author = {Gnerre, Sante and Maccallum, Iain and Przybylski, Dariusz and Ribeiro, Filipe J and Burton, Joshua N and Walker, Bruce J and Sharpe, Ted and Hall, Giles and Shea, Terrance P and Sykes, Sean and Berlin, Aaron M and Aird, Daniel and Costello, Maura and Daza, Riza and Williams, Louise and Nicol, Robert and Gnirke, Andreas and Nusbaum, Chad and Lander, Eric S and Jaffe, David B},
-doi = {10.1073/pnas.1017351108},
-file = {:home/gus/Documents/Mendeley Desktop/Gnerre et al.\_2011\_High-quality draft assemblies of mammalian genomes from massively parallel sequence data.pdf:pdf},
-issn = {1091-6490},
-journal = {Proc Natl Acad Sci U S A},
-keywords = {Algorithms,Animals,DNA,DNA: methods,Genome,Genome: genetics,Genomics,Genomics: methods,Humans,Internet,Mice,Reproducibility of Results,Sequence Analysis,Software},
-month = jan,
-number = {4},
-pages = {1513--1518},
-pmid = {21187386},
-title = {{High-quality draft assemblies of mammalian genomes from massively parallel sequence data}},
-url = {http://www.pnas.org/cgi/content/abstract/108/4/1513},
-volume = {108},
-year = {2011}
-}
-@article{Chaisson2009,
-abstract = {Increasing read length is currently viewed as the crucial condition for fragment assembly with next-generation sequencing technologies. However, introducing mate-paired reads (separated by a gap of length, GapLength) opens a possibility to transform short mate-pairs into long mate-reads of length approximately GapLength, and thus raises the question as to whether the read length (as opposed to GapLength) even matters. We describe a new tool, EULER-USR, for assembling mate-paired short reads and use it to analyze the question of whether the read length matters. We further complement the ongoing experimental efforts to maximize read length by a new computational approach for increasing the effective read length. While the common practice is to trim the error-prone tails of the reads, we present an approach that substitutes trimming with error correction using repeat graphs. An important and counterintuitive implication of this result is that one may extend sequencing reactions that degrade with length "past their prime" to where the error rate grows above what is normally acceptable for fragment assembly.},
-author = {Chaisson, Mark J and Brinza, Dumitru and Pevzner, Pavel A},
-doi = {10.1101/gr.079053.108},
-file = {:home/gus/Documents/Mendeley Desktop/Chaisson, Brinza, Pevzner\_2009\_De novo fragment assembly with short mate-paired reads Does the read length matter.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Bacterial,Base Pairing,Base Pairing: physiology,Base Sequence,Base Sequence: physiology,Bias (Epidemiology),Biological,Chromosome Mapping,Chromosome Mapping: methods,Computational Biology,Computational Biology: methods,DNA,DNA: methods,Escherichia coli,Escherichia coli: genetics,Genetic Markers,Genome,Models,Sequence Alignment,Sequence Alignment: methods,Sequence Analysis},
-month = feb,
-number = {2},
-pages = {336--46},
-pmid = {19056694},
-title = {{De novo fragment assembly with short mate-paired reads: Does the read length matter?}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2652199\&tool=pmcentrez\&rendertype=abstract},
-volume = {19},
-year = {2009}
-}
-@article{Maccallum:2009vn,
-abstract = {We demonstrate that genome sequences approaching finished quality can be generated from short paired reads. Using 36 base (fragment) and 26 base (jumping) reads from five microbial genomes of varied GC composition and sizes up to 40 Mb, ALLPATHS2 generated assemblies with long, accurate contigs and scaffolds. Velvet and EULER-SR were less accurate. For example, for Escherichia coli, the fraction of 10-kb stretches that were perfect was 99.8\% (ALLPATHS2), 68.7\% (Velvet), and 42.1\% (EULER-SR).},
-author = {Maccallum, Iain and Przybylski, Dariusz and Gnerre, Sante and Burton, Joshua and Shlyakhter, Ilya and Gnirke, Andreas and Malek, Joel and McKernan, Kevin and Ranade, Swati and Shea, Terrance P and Williams, Louise and Young, Sarah and Nusbaum, Chad and Jaffe, David B},
-doi = {10.1186/gb-2009-10-10-r103},
-file = {:home/gus/Documents/Mendeley Desktop//Maccallum et al.\_2009\_ALLPATHS 2 small genomes assembled accurately and with high continuity from short paired reads.pdf:pdf},
-issn = {1465-6914},
-journal = {Genome biology},
-keywords = {Bacteria,Bacteria: genetics,Base Pairing,Base Pairing: genetics,Fungi,Fungi: genetics,Genome,Genome: genetics,Genomics,Genomics: methods,Reproducibility of Results,Software},
-month = jan,
-number = {10},
-pages = {R103},
-pmid = {19796385},
-title = {{ALLPATHS 2: small genomes assembled accurately and with high continuity from short paired reads.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2784318\&tool=pmcentrez\&rendertype=abstract},
-volume = {10},
-year = {2009}
-}
-@article{Ilie2011,
-abstract = {High-throughput sequencing technologies produce very large amounts of data and sequencing errors constitute one of the major problems in analyzing such data. Current algorithms for correcting these errors are not very accurate and do not automatically adapt to the given data.},
-author = {Ilie, Lucian and Fazayeli, Farideh and Ilie, Silvana},
-institution = {Department of Computer Science, University of Western Ontario, London, ON N6A 5B7, Canada. ilie@csd.uwo.ca},
-journal = {Bioinformatics},
-number = {3},
-pages = {295--302},
-pmid = {21115437},
-title = {{HiTEC: accurate error correction in high-throughput sequencing data.}},
-url = {http://www.ncbi.nlm.nih.gov/pubmed/21115437},
-volume = {27},
-year = {2011}
-}
-@article{Butler:2008kx,
-abstract = {New DNA sequencing technologies deliver data at dramatically lower costs but demand new analytical methods to take full advantage of the very short reads that they produce. We provide an initial, theoretical solution to the challenge of de novo assembly from whole-genome shotgun "microreads." For 11 genomes of sizes up to 39 Mb, we generated high-quality assemblies from 80x coverage by paired 30-base simulated reads modeled after real Illumina-Solexa reads. The bacterial genomes of Campylobacter jejuni and Escherichia coli assemble optimally, yielding single perfect contigs, and larger genomes yield assemblies that are highly connected and accurate. Assemblies are presented in a graph form that retains intrinsic ambiguities such as those arising from polymorphism, thereby providing information that has been absent from previous genome assemblies. For both C. jejuni and E. coli, this assembly graph is a single edge encompassing the entire genome. Larger genomes produce more complicated graphs, but the vast majority of the bases in their assemblies are present in long edges that are nearly always perfect. We describe a general method for genome assembly that can be applied to all types of DNA sequence data, not only short read data, but also conventional sequence reads.},
-author = {Butler, Jonathan and MacCallum, Iain and Kleber, Michael and Shlyakhter, Ilya a and Belmonte, Matthew K and Lander, Eric S and Nusbaum, Chad and Jaffe, David B},
-doi = {10.1101/gr.7337908},
-file = {:home/gus/Documents/Mendeley Desktop/Butler et al.\_2008\_ALLPATHS de novo assembly of whole-genome shotgun microreads.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Bacterial,Bacterial: genetics,Campylobacter jejuni,Campylobacter jejuni: genetics,Computational Biology,Computational Biology: methods,Computer Simulation,DNA,DNA: methods,DNA: standards,Escherichia coli,Escherichia coli: genetics,Genome,Reproducibility of Results,Sequence Analysis},
-month = may,
-number = {5},
-pages = {810--20},
-pmid = {18340039},
-title = {{ALLPATHS: de novo assembly of whole-genome shotgun microreads.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2336810\&tool=pmcentrez\&rendertype=abstract},
-volume = {18},
-year = {2008}
-}
-@incollection{CLR,
-author = {Cormen, T. and Leiserson, C. and Rivest, R.},
-chapter = {12},
-publisher = {MIT Press},
-title = {{Introduction to Algorithms}},
-year = {1990}
-}
-@article{Gilchrist2007,
-author = {Gilchrist, Jeff},
-doi = {10.1109/AINA.2007.109},
-file = {:home/gus/Documents/Mendeley Desktop/Gilchrist\_2007\_Parallel lossless data compression based on the burrows-wheeler transform.pdf:pdf},
-isbn = {0-7695-2846-5},
-issn = {1550-445X},
-journal = {21st International Conference on Advanced Networking and Applications (AINA '07)},
-month = may,
-pages = {877--884},
-publisher = {Ieee},
-title = {{Parallel lossless data compression based on the burrows-wheeler transform}},
-url = {http://ieeexplore.ieee.org/lpdocs/epic03/wrapper.htm?arnumber=4220984 http://www.computer.org/portal/web/csdl/doi/10.1109/AINA.2007.109},
-year = {2007}
-}
-@article{Baker2012,
-author = {Baker, Monya},
-doi = {10.1038/nmeth.1858},
-file = {:home/gus/Documents/Mendeley Desktop/Baker\_2012\_Structural variation the genome's hidden architecture.pdf:pdf},
-issn = {1548-7091},
-journal = {Nature Methods},
-month = jan,
-number = {2},
-pages = {133--137},
-publisher = {Nature Publishing Group, a division of Macmillan Publishers Limited. All Rights Reserved.},
-shorttitle = {Nat Meth},
-title = {{Structural variation: the genome's hidden architecture}},
-url = {http://dx.doi.org/10.1038/nmeth.1858},
-volume = {9},
-year = {2012}
-}
-@article{Huttenhower2006,
-abstract = {MOTIVATION: The diverse microarray datasets that have become available over the past several years represent a rich opportunity and challenge for biological data mining. Many supervised and unsupervised methods have been developed for the analysis of individual microarray datasets. However, integrated analysis of multiple datasets can provide a broader insight into genetic regulation of specific biological pathways under a variety of conditions. RESULTS: To aid in the analysis of such large compendia of microarray experiments, we present Microarray Experiment Functional Integration Technology (MEFIT), a scalable Bayesian framework for predicting functional relationships from integrated microarray datasets. Furthermore, MEFIT predicts these functional relationships within the context of specific biological processes. All results are provided in the context of one or more specific biological functions, which can be provided by a biologist or drawn automatically from catalogs such as the Gene Ontology (GO). Using MEFIT, we integrated 40 Saccharomyces cerevisiae microarray datasets spanning 712 unique conditions. In tests based on 110 biological functions drawn from the GO biological process ontology, MEFIT provided a 5\% or greater performance increase for 54 functions, with a 5\% or more decrease in performance in only two functions.},
-annote = {MEFIT. Better correlation / aggregation for micro-array data.},
-author = {Huttenhower, Curtis and Hibbs, Matt and Myers, Chad and Troyanskaya, Olga G},
-doi = {10.1093/bioinformatics/btl492},
-file = {:home/gus/Documents/Mendeley Desktop/Huttenhower et al.\_2006\_A scalable method for integration and functional analysis of multiple microarray datasets.pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-keywords = {Algorithms,Bayes Theorem,Databases, Genetic,Gene Expression Profiling,Gene Expression Profiling: methods,Information Storage and Retrieval,Information Storage and Retrieval: methods,Saccharomyces cerevisiae,Saccharomyces cerevisiae Proteins,Saccharomyces cerevisiae Proteins: metabolism,Saccharomyces cerevisiae: metabolism,Systems Integration},
-month = dec,
-number = {23},
-pages = {2890--7},
-pmid = {17005538},
-title = {{A scalable method for integration and functional analysis of multiple microarray datasets.}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/22/23/2890},
-volume = {22},
-year = {2006}
-}
-@article{Melsted2011,
-abstract = {BACKGROUND:Counting k-mers (substrings of length k in DNA sequence data) is an essential component of many methods in bioinformatics, including for genome and transcriptome assembly, for metagenomic sequencing, and for error correction of sequence reads. Although simple in principle, counting k-mers in large modern sequence data sets can easily overwhelm the memory capacity of standard computers. In current data sets, a large fraction - often more than 50\% - of the storage capacity may be spent on storing k-mers that contain sequencing errors and which are typically observed only a single time in the data. These singleton k-mers are uninformative for many algorithms without some kind of error correction.RESULTS:We present a new method that identifies all the k-mers that occur more than once in a DNA sequence data set. Our method does this using a Bloom filter, a probabilistic data structure that stores all the observed k-mers implicitly in memory with greatly reduced memory requirements. We then make a second sweep through the data to provide exact counts of all nonunique k-mers. For example data sets, we report up to 50\% savings in memory usage compared to current software, with modest costs in computational speed. This approach may reduce memory requirements for any algorithm that starts by counting k-mers in sequence data with errors.CONCLUSIONS:A reference implementation for this methodology, BFCounter, is written in C++ and is GPL licensed. It is available for free download at http://pritch.bsd.uchicago.edu/software.html},
-author = {Melsted, Pall and Pritchard, Jonathan K},
-doi = {10.1186/1471-2105-12-333},
-file = {:home/gus/Documents/Mendeley Desktop/Melsted, Pritchard\_2011\_Efficient counting of k-mers in DNA sequences using a Bloom Filter.pdf:pdf},
-issn = {1471-2105},
-journal = {BMC Bioinformatics},
-number = {1},
-pages = {333},
-title = {{Efficient counting of k-mers in DNA sequences using a Bloom Filter}},
-url = {http://www.biomedcentral.com/1471-2105/12/333},
-volume = {12},
-year = {2011}
-}
-@article{salmela2011correcting,
-author = {Salmela, L. and Schr\"{o}der, J.},
-file = {:home/gus/Documents/Mendeley Desktop/Salmela, Schr\"{o}der\_2011\_Correcting errors in short reads by multiple alignments.pdf:pdf},
-journal = {Bioinformatics},
-number = {11},
-pages = {1455},
-publisher = {Oxford Univ Press},
-title = {{Correcting errors in short reads by multiple alignments}},
-url = {http://bioinformatics.oxfordjournals.org/content/27/11/1455.short},
-volume = {27},
-year = {2011}
-}
-@article{Rhrissorrakrai2011a,
-abstract = {ABSTRACT: BACKGROUND: Graphical models of network associations are useful for both visualizing and integrating multiple types of association data. Identifying modules, or groups of functionally related gene products, is an important challenge in analyzing biological networks. However, existing tools to identify modules are insufficient when applied to dense networks of experimentally derived interaction data. To address this problem, we have developed an agglomerative clustering method that is able to identify highly modular sets of gene products within highly interconnected molecular interaction networks. RESULTS: MINE outperforms MCODE, CFinder, NEMO, SPICi, and MCL in identifying non-exclusive, high modularity clusters when applied to the C. elegans protein-protein interaction network. The algorithm generally achieves superior geometric accuracy and modularity for annotated functional categories. In comparison with the most closely related algorithm, MCODE, the top clusters identified by MINE are consistently of higher density and MINE is less likely to designate overlapping modules as a single unit. MINE offers a high level of granularity with a small number of adjustable parameters, enabling users to fine-tune cluster results for input networks with differing topological properties. CONCLUSIONS: MINE was created in response to the challenge of discovering high quality modules of gene products within highly interconnected biological networks. The algorithm allows a high degree of flexibility and user-customisation of results with few adjustable parameters. MINE outperforms several popular clustering algorithms in identifying modules with high modularity and obtains good overall recall and precision of functional annotations in protein-protein interaction networks from both S. cerevisiae and C. elegans.},
-author = {Rhrissorrakrai, Kahn and Gunsalus, Kristin C},
-doi = {10.1186/1471-2105-12-192},
-file = {:home/gus/Documents/Mendeley Desktop/Rhrissorrakrai, Gunsalus\_2011\_MINE Module Identification in NEtworks.pdf:pdf},
-issn = {1471-2105},
-journal = {BMC bioinformatics},
-month = may,
-number = {1},
-pages = {192},
-pmid = {21605434},
-title = {{MINE: Module Identification in NEtworks.}},
-url = {http://www.biomedcentral.com/1471-2105/12/192},
-volume = {12},
-year = {2011}
-}
-@article{Navlakha2011,
-abstract = {What proteins interacted in a long-extinct ancestor of yeast? How have different members of a protein complex assembled together over time? Our ability to answer such questions has been limited by the unavailability of ancestral protein-protein interaction (PPI) networks. To overcome this limitation, we propose several novel algorithms to reconstruct the growth history of a present-day network. Our likelihood-based method finds a probable previous state of the graph by applying an assumed growth model backwards in time. This approach retains node identities so that the history of individual nodes can be tracked. Using this methodology, we estimate protein ages in the yeast PPI network that are in good agreement with sequence-based estimates of age and with structural features of protein complexes. Further, by comparing the quality of the inferred histories for several different growth models (duplication-mutation with complementarity, forest fire, and preferential attachment), we provide additional evidence that a duplication-based model captures many features of PPI network growth better than models designed to mimic social network growth. From the reconstructed history, we model the arrival time of extant and ancestral interactions and predict that complexes have significantly re-wired over time and that new edges tend to form within existing complexes. We also hypothesize a distribution of per-protein duplication rates, track the change of the network's clustering coefficient, and predict paralogous relationships between extant proteins that are likely to be complementary to the relationships inferred using sequence alone. Finally, we infer plausible parameters for the model, thereby predicting the relative probability of various evolutionary events. The success of these algorithms indicates that parts of the history of the yeast PPI are encoded in its present-day form.},
-author = {Navlakha, Saket and Kingsford, Carl},
-doi = {10.1371/journal.pcbi.1001119},
-editor = {Bader, Joel S.},
-file = {:home/gus/Documents/Mendeley Desktop/Navlakha, Kingsford\_2011\_Network archaeology uncovering ancient networks from present-day interactions.pdf:pdf},
-issn = {1553-7358},
-journal = {PLoS computational biology},
-keywords = {Computational Biology/Systems Biology,Computer Science,Molecular Biology/Bioinformatics,Research Article},
-month = apr,
-number = {4},
-pages = {e1001119},
-pmid = {21533211},
-publisher = {Public Library of Science},
-title = {{Network archaeology: uncovering ancient networks from present-day interactions.}},
-url = {http://dx.plos.org/10.1371/journal.pcbi.1001119},
-volume = {7},
-year = {2011}
-}
-@article{Goya2010,
-abstract = {Motivation: Next-generation sequencing (NGS) has enabled whole genome and transcriptome single nucleotide variant (SNV) discovery in cancer. NGS produces millions of short sequence reads that, once aligned to a reference genome sequence, can be interpreted for the presence of SNVs. Although tools exist for SNV discovery from NGS data, none are specifically suited to work with data from tumors, where altered ploidy and tumor cellularity impact the statistical expectations of SNV discovery. Results: We developed three implementations of a probabilistic Binomial mixture model, called SNVMix, designed to infer SNVs from NGS data from tumors to address this problem. The first models allelic counts as observations and infers SNVs and model parameters using an expectation maximization (EM) algorithm and is therefore capable of adjusting to deviation of allelic frequencies inherent in genomically unstable tumor genomes. The second models nucleotide and mapping qualities of the reads by probabilistically weighting the contribution of a read/nucleotide to the inference of a SNV based on the confidence we have in the base call and the read alignment. The third combines filtering out low-quality data in addition to probabilistic weighting of the qualities. We quantitatively evaluated these approaches on 16 ovarian cancer RNASeq datasets with matched genotyping arrays and a human breast cancer genome sequenced to >40 (haploid) coverage with ground truth data and show systematically that the SNVMix models outperform competing approaches. Availability: Software and data are available at http://compbio.bccrc.ca Contact: sshahbccrc.ca Supplemantary information: Supplementary data are available at Bioinformatics online.},
-author = {Goya, Rodrigo and Sun, Mark G F and Morin, Ryan D and Leung, Gillian and Ha, Gavin and Wiegand, Kimberley C and Senz, Janine and Crisan, Anamaria and Marra, Marco A and Hirst, Martin and Huntsman, David and Murphy, Kevin P and Aparicio, Sam and Shah, Sohrab P},
-file = {:home/gus/Documents/Mendeley Desktop/Goya et al.\_2010\_SNVMix predicting single nucleotide variants from next-generation sequencing of tumors.pdf:pdf},
-institution = {Department of Molecular Oncology Breast Cancer Research Program, British Columbia Cancer Research Centre, Vancouver, BC, Canada.},
-journal = {Bioinformatics},
-number = {6},
-pages = {730--736},
-publisher = {Oxford University Press},
-title = {{SNVMix: predicting single nucleotide variants from next-generation sequencing of tumors}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2832826\&tool=pmcentrez\&rendertype=abstract},
-volume = {26},
-year = {2010}
-}
-@article{trigger1978iroquois,
-author = {Trigger, B.},
-journal = {Pennsylvania Archaeologist},
-pages = {55--65},
-title = {{Iroquois matriliny}},
-url = {http://scholar.google.com/scholar?hl=fr\&q=Iroquoian+Matriliny\&btnG=Rechercher\&lr=\&as\_ylo=\&as\_vis=0\#0},
-volume = {48},
-year = {1978}
-}
-@article{dalloul2010multi,
-author = {Dalloul, R.A. and Long, J.A. and Zimin, A.V. and Aslam, L. and Beal, K. and Bouffard, P. and Burt, D.W. and Crasta, O. and Crooijmans, R.P.M.A. and Cooper, K. and Others},
-file = {:home/gus/Documents/Mendeley Desktop/Dalloul et al.\_2010\_Multi-platform next-generation sequencing of the domestic turkey (Meleagris gallopavo) genome assembly and analysis.pdf:pdf},
-journal = {PLoS biology},
-number = {9},
-pages = {e1000475},
-title = {{Multi-platform next-generation sequencing of the domestic turkey (Meleagris gallopavo): genome assembly and analysis}},
-url = {http://dx.plos.org/10.1371/journal.pbio.1000475},
-volume = {8},
-year = {2010}
-}
-@article{Li01022010,
-abstract = {Next-generation massively parallel DNA sequencing technologies provide ultrahigh throughput at a substantially lower unit data cost; however, the data are very short read length sequences, making de novo assembly extremely challenging. Here, we describe a novel method for de novo assembly of large genomes from short read sequences. We successfully assembled both the Asian and African human genome sequences, achieving an N50 contig size of 7.4 and 5.9 kilobases (kb) and scaffold of 446.3 and 61.9 kb, respectively. The development of this de novo short read assembly method creates new opportunities for building reference sequences and carrying out accurate analyses of unexplored genomes in a cost-effective way.},
-author = {Li, Ruiqiang and Zhu, Hongmei and Ruan, Jue and Qian, Wubin and Fang, Xiaodong and Shi, Zhongbin and Li, Yingrui and Li, Shengting and Shan, Gao and Kristiansen, Karsten and Li, Songgang and Yang, Huanming and Wang, Jian and Wang, Jun},
-doi = {10.1101/gr.097261.109},
-file = {:home/gus/Documents/Mendeley Desktop/Li et al.\_2010\_De novo assembly of human genomes with massively parallel short read sequencing.pdf:pdf},
-journal = {Genome Research},
-number = {2},
-pages = {265--272},
-title = {{De novo assembly of human genomes with massively parallel short read sequencing}},
-url = {http://genome.cshlp.org/content/20/2/265.abstract},
-volume = {20},
-year = {2010}
-}
-@article{Zerbino2009,
-author = {Zerbino, DR and McEwen, GK},
-file = {:home/gus/Documents/Mendeley Desktop/Zerbino, McEwen\_2009\_Pebble and rock band heuristic resolution of repeats and scaffolding in the velvet short-read de novo assembler.pdf:pdf},
-journal = {PloS one},
-title = {{Pebble and rock band: heuristic resolution of repeats and scaffolding in the velvet short-read de novo assembler}},
-url = {http://dx.plos.org/10.1371/journal.pone.0008407},
-year = {2009}
-}
-@inproceedings{Chazelle:2004:BFE:982792.982797,
-address = {Philadelphia, PA, USA},
-author = {Chazelle, Bernard and Kilian, Joe and Rubinfeld, Ronitt and Tal, Ayellet},
-booktitle = {Proceedings of the fifteenth annual ACM-SIAM symposium on Discrete algorithms},
-file = {:home/gus/Documents/Mendeley Desktop/Chazelle et al.\_2004\_The Bloomier filter an efficient data structure for static support lookup tables.pdf:pdf},
-isbn = {0-89871-558-X},
-pages = {30--39},
-publisher = {Society for Industrial and Applied Mathematics},
-series = {SODA '04},
-title = {{The Bloomier filter: an efficient data structure for static support lookup tables}},
-url = {http://dl.acm.org/citation.cfm?id=982797 http://dl.acm.org/citation.cfm?id=982792.982797},
-year = {2004}
-}
-@inproceedings{Gao2004,
-author = {Gao, H and Groote, J F and Hesselink, W H},
-booktitle = {18th International Parallel and Distributed Processing Symposium},
-doi = {10.1109/IPDPS.2004.1302969},
-isbn = {0769521320},
-number = {C},
-pages = {50--58},
-publisher = {Ieee},
-title = {{Almost wait-free resizable hashtables}},
-url = {http://ieeexplore.ieee.org/lpdocs/epic03/wrapper.htm?arnumber=1302969},
-volume = {00},
-year = {2004}
-}
-@article{Butler:2008kx,
-abstract = {New DNA sequencing technologies deliver data at dramatically lower costs but demand new analytical methods to take full advantage of the very short reads that they produce. We provide an initial, theoretical solution to the challenge of de novo assembly from whole-genome shotgun "microreads." For 11 genomes of sizes up to 39 Mb, we generated high-quality assemblies from 80x coverage by paired 30-base simulated reads modeled after real Illumina-Solexa reads. The bacterial genomes of Campylobacter jejuni and Escherichia coli assemble optimally, yielding single perfect contigs, and larger genomes yield assemblies that are highly connected and accurate. Assemblies are presented in a graph form that retains intrinsic ambiguities such as those arising from polymorphism, thereby providing information that has been absent from previous genome assemblies. For both C. jejuni and E. coli, this assembly graph is a single edge encompassing the entire genome. Larger genomes produce more complicated graphs, but the vast majority of the bases in their assemblies are present in long edges that are nearly always perfect. We describe a general method for genome assembly that can be applied to all types of DNA sequence data, not only short read data, but also conventional sequence reads.},
-author = {Butler, Jonathan and MacCallum, Iain and Kleber, Michael and Shlyakhter, Ilya A and Belmonte, Matthew K and Lander, Eric S and Nusbaum, Chad and Jaffe, David B},
-doi = {10.1101/gr.7337908},
-file = {:home/gus/Documents/Mendeley Desktop/Butler et al.\_2008\_ALLPATHS de novo assembly of whole-genome shotgun microreads.pdf:pdf},
-journal = {Genome Res},
-month = may,
-number = {5},
-pages = {810--820},
-pmid = {18340039},
-title = {{ALLPATHS: de novo assembly of whole-genome shotgun microreads}},
-volume = {18},
-year = {2008}
-}
-@article{Dayarian:2010ly,
-abstract = {High throughput sequencing (HTS) platforms produce gigabases of short read (<100 bp) data per run. While these short reads are adequate for resequencing applications, de novo assembly of moderate size genomes from such reads remains a significant challenge. These limitations could be partially overcome by utilizing mate pair technology, which provides pairs of short reads separated by a known distance along the genome.},
-author = {Dayarian, Adel and Michael, Todd P and Sengupta, Anirvan M},
-doi = {10.1186/1471-2105-11-345},
-journal = {BMC Bioinformatics},
-pages = {345},
-pmid = {20576136},
-title = {{SOPRA: Scaffolding algorithm for paired reads via statistical optimization}},
-volume = {11},
-year = {2010}
-}
-@article{Pevzner:2001uq,
-abstract = {For the last 20 years, fragment assembly in DNA sequencing followed the "overlap-layout-consensus" paradigm that is used in all currently available assembly tools. Although this approach proved useful in assembling clones, it faces difficulties in genomic shotgun assembly. We abandon the classical "overlap-layout-consensus" approach in favor of a new euler algorithm that, for the first time, resolves the 20-year-old "repeat problem" in fragment assembly. Our main result is the reduction of the fragment assembly to a variation of the classical Eulerian path problem that allows one to generate accurate solutions of large-scale sequencing problems. euler, in contrast to the celera assembler, does not mask such repeats but uses them instead as a powerful fragment assembly tool.},
-author = {Pevzner, P A and Tang, H and Waterman, M S},
-doi = {10.1073/pnas.171285098},
-file = {:home/gus/Documents/Mendeley Desktop/Pevzner, Tang, Waterman\_2001\_An Eulerian path approach to DNA fragment assembly.pdf:pdf},
-journal = {Proc Natl Acad Sci U S A},
-month = aug,
-number = {17},
-pages = {9748--9753},
-pmid = {11504945},
-title = {{An Eulerian path approach to DNA fragment assembly}},
-volume = {98},
-year = {2001}
-}
-@article{mt2006science,
-author = {{Mt Pleasant}, J. and Staller, JE and Tykot, RH and Benz, BF},
-journal = {Histories of Maize: Multidisciplinary approaches to the prehistory, linguistics, biogeography, domestication, and evolution of maize. Elsevier, San Diego},
-pages = {529--537},
-title = {{The science behind the three sisters mound system: an agronomic assessment of an indigenous agricultural system in the Northeast}},
-url = {http://scholar.google.com/scholar?hl=fr\&q=The+Science+Behind+the+Three+Sisters+Mound+System:+An+Agronomic+Assessment+of+an+Indigenous+Agricultural+System+in+the+Northeast.\&btnG=Rechercher\&lr=\&as\_ylo=\&as\_vis=0\#0},
-year = {2006}
-}
-@article{Kurtz2008,
-abstract = {The challenges of accurate gene prediction and enumeration are further aggravated in large genomes that contain highly repetitive transposable elements (TEs). Yet TEs play a substantial role in genome evolution and are themselves an important subject of study. Repeat annotation, based on counting occurrences of k-mers, has been previously used to distinguish TEs from low-copy genic regions; but currently available software solutions are impractical due to high memory requirements or specialization for specific user-tasks.},
-author = {Kurtz, Stefan and Narechania, Apurva and Stein, Joshua C and Ware, Doreen},
-doi = {10.1186/1471-2164-9-517},
-file = {:home/gus/Documents/Mendeley Desktop/Kurtz et al.\_2008\_A new method to compute K-mer frequencies and its application to annotate large repetitive plant genomes.pdf:pdf},
-issn = {1471-2164},
-journal = {BMC genomics},
-keywords = {Computational Biology,Computational Biology: methods,DNA Transposable Elements,Genome, Plant,Genomics,Genomics: methods,Methods,Oryza sativa,Software,Sorghum,Zea mays},
-month = jan,
-pages = {517},
-pmid = {18976482},
-title = {{A new method to compute K-mer frequencies and its application to annotate large repetitive plant genomes.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2613927\&tool=pmcentrez\&rendertype=abstract},
-volume = {9},
-year = {2008}
-}
-@article{Gnerre2011,
-abstract = {Massively parallel DNA sequencing technologies are revolutionizing genomics by making it possible to generate billions of relatively short (\~{}100-base) sequence reads at very low cost. Whereas such data can be readily used for a wide range of biomedical applications, it has proven difficult to use them to generate high-quality de novo genome assemblies of large, repeat-rich vertebrate genomes. To date, the genome assemblies generated from such data have fallen far short of those obtained with the older (but much more expensive) capillary-based sequencing approach. Here, we report the development of an algorithm for genome assembly, ALLPATHS-LG, and its application to massively parallel DNA sequence data from the human and mouse genomes, generated on the Illumina platform. The resulting draft genome assemblies have good accuracy, short-range contiguity, long-range connectivity, and coverage of the genome. In particular, the base accuracy is high (≥99.95\%) and the scaffold sizes (N50 size = 11.5 Mb for human and 7.2 Mb for mouse) approach those obtained with capillary-based sequencing. The combination of improved sequencing technology and improved computational methods should now make it possible to increase dramatically the de novo sequencing of large genomes. The ALLPATHS-LG program is available at http://www.broadinstitute.org/science/programs/genome-biology/crd.},
-author = {Gnerre, Sante and Maccallum, Iain and Przybylski, Dariusz and Ribeiro, Filipe J and Burton, Joshua N and Walker, Bruce J and Sharpe, Ted and Hall, Giles and Shea, Terrance P and Sykes, Sean and Berlin, Aaron M and Aird, Daniel and Costello, Maura and Daza, Riza and Williams, Louise and Nicol, Robert and Gnirke, Andreas and Nusbaum, Chad and Lander, Eric S and Jaffe, David B},
-doi = {10.1073/pnas.1017351108},
-file = {:home/gus/Documents/Mendeley Desktop/Gnerre et al.\_2011\_High-quality draft assemblies of mammalian genomes from massively parallel sequence data.pdf:pdf},
-issn = {1091-6490},
-journal = {Proceedings of the National Academy of Sciences of the United States of America},
-keywords = {Algorithms,Animals,Genome,Genome: genetics,Genomics,Genomics: methods,Humans,Internet,Mice,Reproducibility of Results,Sequence Analysis, DNA,Sequence Analysis, DNA: methods,Software},
-month = jan,
-number = {4},
-pages = {1513--8},
-pmid = {21187386},
-title = {{High-quality draft assemblies of mammalian genomes from massively parallel sequence data.}},
-url = {http://www.pnas.org/cgi/content/abstract/108/4/1513},
-volume = {108},
-year = {2011}
-}
-@article{Berger2011,
-abstract = {Prostate cancer is the second most common cause of male cancer deaths in the United States. However, the full range of prostate cancer genomic alterations is incompletely characterized. Here we present the complete sequence of seven primary human prostate cancers and their paired normal counterparts. Several tumours contained complex chains of balanced (that is, 'copy-neutral') rearrangements that occurred within or adjacent to known cancer genes. Rearrangement breakpoints were enriched near open chromatin, androgen receptor and ERG DNA binding sites in the setting of the ETS gene fusion TMPRSS2-ERG, but inversely correlated with these regions in tumours lacking ETS fusions. This observation suggests a link between chromatin or transcriptional regulation and the genesis of genomic aberrations. Three tumours contained rearrangements that disrupted CADM2, and four harboured events disrupting either PTEN (unbalanced events), a prostate tumour suppressor, or MAGI2 (balanced events), a PTEN interacting protein not previously implicated in prostate tumorigenesis. Thus, genomic rearrangements may arise from transcriptional or chromatin aberrancies and engage prostate tumorigenic mechanisms.},
-author = {Berger, Michael F and Lawrence, Michael S and Demichelis, Francesca and Drier, Yotam and Cibulskis, Kristian and Sivachenko, Andrey Y and Sboner, Andrea and Esgueva, Raquel and Pflueger, Dorothee and Sougnez, Carrie and Onofrio, Robert and Carter, Scott L and Park, Kyung and Habegger, Lukas and Ambrogio, Lauren and Fennell, Timothy and Parkin, Melissa and Saksena, Gordon and Voet, Douglas and Ramos, Alex H and Pugh, Trevor J and Wilkinson, Jane and Fisher, Sheila and Winckler, Wendy and Mahan, Scott and Ardlie, Kristin and Baldwin, Jennifer and Simons, Jonathan W and Kitabayashi, Naoki and MacDonald, Theresa Y and Kantoff, Philip W and Chin, Lynda and Gabriel, Stacey B and Gerstein, Mark B and Golub, Todd R and Meyerson, Matthew and Tewari, Ashutosh and Lander, Eric S and Getz, Gad and Rubin, Mark A and Garraway, Levi A},
-doi = {10.1038/nature09744},
-file = {:home/gus/Documents/Mendeley Desktop/Berger et al.\_2011\_The genomic complexity of primary human prostate cancer.pdf:pdf;:home/gus/Documents/Mendeley Desktop/Berger et al.\_2011\_The genomic complexity of primary human prostate cancer(2).pdf:pdf},
-isbn = {doi:10.1038/nature09744},
-issn = {1476-4687},
-journal = {Nature},
-keywords = {Carrier Proteins,Carrier Proteins: genetics,Case-Control Studies,Cell Adhesion Molecules,Cell Adhesion Molecules: genetics,Chromatin,Chromatin: genetics,Chromatin: metabolism,Chromosome Aberrations,Chromosome Breakpoints,Epigenesis, Genetic,Epigenesis, Genetic: genetics,Gene Expression Regulation, Neoplastic,Genetic,Genetic: genetics,Genome, Human,Genome, Human: genetics,Human,Human: genetics,Humans,Male,Neoplastic,PTEN Phosphohydrolase,PTEN Phosphohydrolase: genetics,PTEN Phosphohydrolase: metabolism,Prostatic Neoplasms,Prostatic Neoplasms: genetics,Recombination, Genetic,Recombination, Genetic: genetics,Signal Transduction,Signal Transduction: genetics,Transcription, Genetic},
-language = {en},
-month = feb,
-number = {7333},
-pages = {214--20},
-pmid = {21307934},
-publisher = {Nature Publishing Group},
-title = {{The genomic complexity of primary human prostate cancer.}},
-url = {http://www.nature.com/nature/journal/v470/n7333//full/nature09744.html},
-volume = {470},
-year = {2011}
-}
-@article{Zabet2012,
-abstract = {Motivation: Transcription factors (TFs) are proteins that regulate gene activity by binding to specific sites on the DNA. Understanding the way these molecules locate their target site is of great importance in understanding gene regulation. We developed a comprehensive computational model of this process and estimated the model parameters in (Zabet and Adryan, 2011). Results: GRiP is a highly versatile implementation of this model and simulates the search process in a computationally efficient way. This program aims to provide researchers in the field with a flexible and highly customisable simulation framework. Its features include representation of DNA sequence, TFs and the interaction between TFs and the DNA (facilitated diffusion mechanism), or between various TFs (cooperative behaviour). The software will record both information on the dynamics associated with the search process (locations of molecules) and also steady state results (affinity landscape, occupancy-bias, collision hotspots). Availability: http://logic.sysbiol.cam.ac.uk/grip Supplementary information: Additional information and data is presented in the Supplementary Material which is available at Bioinformatics online. Contact: n.r.zabet@gen.cam.ac.uk},
-author = {Zabet, N. R. and Adryan, B.},
-doi = {10.1093/bioinformatics/bts132},
-file = {:home/gus/Documents/Mendeley Desktop/Zabet, Adryan\_2012\_GRiP a computational tool to simulate transcription factor binding in prokaryotes.pdf:pdf;:home/gus/Documents/Mendeley Desktop/Zabet, Adryan\_2012\_GRiP a computational tool to simulate transcription factor binding in prokaryotes(2).pdf:pdf},
-issn = {1367-4803},
-journal = {Bioinformatics},
-month = mar,
-pages = {bts132--},
-title = {{GRiP: a computational tool to simulate transcription factor binding in prokaryotes}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/bts132v1},
-year = {2012}
-}
-@article{Ladan-Mozes2007,
-author = {Ladan-Mozes, Edya and Shavit, Nir},
-doi = {10.1007/s00446-007-0050-0},
-file = {:home/gus/Documents/Mendeley Desktop/Ladan-Mozes, Shavit\_2007\_An optimistic approach to lock-free FIFO queues.pdf:pdf},
-issn = {0178-2770},
-journal = {Distributed Computing},
-month = nov,
-number = {5},
-pages = {323--341},
-title = {{An optimistic approach to lock-free FIFO queues}},
-url = {http://www.springerlink.com/index/10.1007/s00446-007-0050-0},
-volume = {20},
-year = {2007}
-}
-@article{Trapnell2009,
-abstract = {A new protocol for sequencing the messenger RNA in a cell, known as RNA-Seq, generates millions of short sequence fragments in a single run. These fragments, or 'reads', can be used to measure levels of gene expression and to identify novel splice variants of genes. However, current software for aligning RNA-Seq data to a genome relies on known splice junctions and cannot identify novel ones. TopHat is an efficient read-mapping algorithm designed to align reads from an RNA-Seq experiment to a reference genome without relying on known splice sites.},
-author = {Trapnell, Cole and Pachter, Lior and Salzberg, Steven L},
-doi = {10.1093/bioinformatics/btp120},
-file = {:home/gus/Documents/Mendeley Desktop/Trapnell, Pachter, Salzberg\_2009\_TopHat discovering splice junctions with RNA-Seq.pdf:pdf;:home/gus/Documents/Mendeley Desktop/Trapnell, Pachter, Salzberg\_2009\_TopHat discovering splice junctions with RNA-Seq(2).pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-keywords = {Algorithms,Gene Expression Profiling,Gene Expression Profiling: methods,Genetic,Messenger,Models,RNA,RNA Splicing,RNA Splicing: genetics,Sequence Alignment,Sequence Analysis,Software},
-month = may,
-number = {9},
-pages = {1105--11},
-pmid = {19289445},
-title = {{TopHat: discovering splice junctions with RNA-Seq.}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/25/9/1105},
-volume = {25},
-year = {2009}
-}
-@article{Simpson2009,
-abstract = {Widespread adoption of massively parallel deoxyribonucleic acid (DNA) sequencing instruments has prompted the recent development of de novo short read assembly algorithms. A common shortcoming of the available tools is their inability to efficiently assemble vast amounts of data generated from large-scale sequencing projects, such as the sequencing of individual human genomes to catalog natural genetic variation. To address this limitation, we developed ABySS (Assembly By Short Sequences), a parallelized sequence assembler. As a demonstration of the capability of our software, we assembled 3.5 billion paired-end reads from the genome of an African male publicly released by Illumina, Inc. Approximately 2.76 million contigs > or =100 base pairs (bp) in length were created with an N50 size of 1499 bp, representing 68\% of the reference human genome. Analysis of these contigs identified polymorphic and novel sequences not present in the human reference assembly, which were validated by alignment to alternate human assemblies and to other primate genomes.},
-author = {Simpson, Jared T and Wong, Kim and Jackman, Shaun D and Schein, Jacqueline E and Jones, Steven J M and Birol, Inan\c{c}},
-doi = {10.1101/gr.089532.108},
-file = {:home/gus/Documents/Mendeley Desktop/Simpson et al.\_2009\_ABySS a parallel assembler for short read sequence data.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Animals,Computational Biology,Computational Biology: methods,Contig Mapping,Escherichia coli K12,Escherichia coli K12: genetics,Genetic Variation,Genome, Human,Humans,Polymorphism, Genetic,Reproducibility of Results,Sequence Analysis, DNA,Sequence Analysis, DNA: methods,Software},
-month = jun,
-number = {6},
-pages = {1117--23},
-pmid = {19251739},
-title = {{ABySS: a parallel assembler for short read sequence data.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2694472\&tool=pmcentrez\&rendertype=abstract},
-volume = {19},
-year = {2009}
-}
-@article{Chor2009,
-abstract = {The empirical frequencies of DNA k-mers in whole genome sequences provide an interesting perspective on genomic complexity, and the availability of large segments of genomic sequence from many organisms means that analysis of k-mers with non-trivial lengths is now possible.},
-author = {Chor, Benny and Horn, David and Goldman, Nick and Levy, Yaron and Massingham, Tim},
-doi = {10.1186/gb-2009-10-10-r108},
-file = {:home/gus/Documents/Mendeley Desktop/Chor et al.\_2009\_Genomic DNA k-mer spectra models and modalities.pdf:pdf},
-issn = {1465-6914},
-journal = {Genome biology},
-keywords = {Animals,Base Composition,Base Composition: genetics,Chickens,Chickens: genetics,Computer Simulation,CpG Islands,CpG Islands: genetics,DNA,DNA: genetics,Genome,Genome: genetics,Humans,Markov Chains,Models, Genetic,Zebrafish,Zebrafish: genetics},
-month = jan,
-number = {10},
-pages = {R108},
-pmid = {19814784},
-title = {{Genomic DNA k-mer spectra: models and modalities.}},
-url = {http://genomebiology.com/2009/10/10/R108},
-volume = {10},
-year = {2009}
-}
-@article{Roberts12122004,
-abstract = {Motivation: Comparison of nucleic acid and protein sequences is a fundamental tool of modern bioinformatics. A dominant method of such string matching is the ‘seed-and-extend’ approach, in which occurrences of short subsequences called ‘seeds’ are used to search for potentially longer matches in a large database of sequences. Each such potential match is then checked to see if it extends beyond the seed. To be effective, the seed-and-extend approach needs to catalogue seeds from virtually every substring in the database of search strings. Projects such as mammalian genome assemblies and large-scale protein matching, however, have such large sequence databases that the resulting list of seeds cannot be stored in RAM on a single computer. This significantly slows the matching process.Results: We present a simple and elegant method in which only a small fraction of seeds, called ‘minimizers’, needs to be stored. Using minimizers can speed up string-matching computations by a large factor while missing only a small fraction of the matches found using all seeds.},
-author = {Roberts, Michael and Hayes, Wayne and Hunt, Brian R and Mount, Stephen M and Yorke, James A},
-doi = {10.1093/bioinformatics/bth408},
-file = {:home/gus/Documents/Mendeley Desktop/Roberts et al.\_2004\_Reducing storage requirements for biological sequence comparison(2).pdf:pdf},
-issn = {1367-4803},
-journal = {Bioinformatics},
-keywords = {Algorithms,Computer-Assisted,Databases,Genetic,Information Storage and Retrieval,Information Storage and Retrieval: methods,Numerical Analysis,Sequence Alignment,Sequence Alignment: methods,Sequence Analysis,Sequence Analysis: methods},
-month = dec,
-number = {18},
-pages = {3363--3369},
-pmid = {15256412},
-title = {{Reducing storage requirements for biological sequence comparison}},
-url = {http://bioinformatics.oxfordjournals.org/content/20/18/3363.short},
-volume = {20},
-year = {2004}
-}
-@inproceedings{Martinez2005,
-author = {Martinez, J. and Cumplido, R. and Feregrino, C.},
-booktitle = {2005 International Conference on Reconfigurable Computing and FPGAs (ReConFig'05)},
-doi = {10.1109/RECONFIG.2005.9},
-isbn = {0-7695-2456-7},
-month = sep,
-pages = {17--17},
-publisher = {IEEE},
-title = {{An FPGA Parallel Sorting Architecture for the Burrows Wheeler Transform}},
-url = {http://dl.acm.org/citation.cfm?id=1114693.1115262},
-year = {2005}
-}
-@article{zhao2011psaec,
-author = {Zhao, Z. and Yin, J. and Zhan, Y. and Xiong, W. and Li, Y. and Liu, F.},
-file = {:home/gus/Documents/Mendeley Desktop/Zhao et al.\_2011\_PSAEC An Improved Algorithm for Short Read Error Correction Using Partial Suffix Arrays.pdf:pdf},
-journal = {Frontiers in Algorithmics and Algorithmic Aspects in Information and Management},
-pages = {220--232},
-publisher = {Springer},
-title = {{PSAEC: An Improved Algorithm for Short Read Error Correction Using Partial Suffix Arrays}},
-url = {http://www.springerlink.com/index/9L77826718445828.pdf},
-year = {2011}
-}
-@article{Li2008,
-abstract = {New sequencing technologies promise a new era in the use of DNA sequence. However, some of these technologies produce very short reads, typically of a few tens of base pairs, and to use these reads effectively requires new algorithms and software. In particular, there is a major issue in efficiently aligning short reads to a reference genome and handling ambiguity or lack of accuracy in this alignment. Here we introduce the concept of mapping quality, a measure of the confidence that a read actually comes from the position it is aligned to by the mapping algorithm. We describe the software MAQ that can build assemblies by mapping shotgun short reads to a reference genome, using quality scores to derive genotype calls of the consensus sequence of a diploid genome, e.g., from a human sample. MAQ makes full use of mate-pair information and estimates the error probability of each read alignment. Error probabilities are also derived for the final genotype calls, using a Bayesian statistical model that incorporates the mapping qualities, error probabilities from the raw sequence quality scores, sampling of the two haplotypes, and an empirical model for correlated errors at a site. Both read mapping and genotype calling are evaluated on simulated data and real data. MAQ is accurate, efficient, versatile, and user-friendly. It is freely available at http://maq.sourceforge.net.},
-author = {Li, Heng and Ruan, Jue and Durbin, Richard},
-doi = {10.1101/gr.078212.108},
-file = {:home/gus/Documents/Mendeley Desktop/Li, Ruan, Durbin\_2008\_Mapping short DNA sequencing reads and calling variants using mapping quality scores.pdf:pdf;:home/gus/Documents/Mendeley Desktop/Li, Ruan, Durbin\_2008\_Mapping short DNA sequencing reads and calling variants using mapping quality scores(2).pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Bacterial,Bacterial: genetics,Bayes Theorem,Chromosome Mapping,Chromosome Mapping: statistics \& numerical data,Computer Simulation,DNA,DNA: genetics,DNA: statistics \& numerical dat,Diploidy,Genome,Human,Humans,Polymorphism,Reproducibility of Results,Salmonella paratyphi A,Salmonella paratyphi A: genetics,Sequence Alignment,Sequence Alignment: statistics \& numerical data,Sequence Analysis,Single Nucleotide,Software},
-month = nov,
-number = {11},
-pages = {1851--8},
-pmid = {18714091},
-title = {{Mapping short DNA sequencing reads and calling variants using mapping quality scores.}},
-url = {http://genome.cshlp.org/cgi/content/abstract/18/11/1851},
-volume = {18},
-year = {2008}
-}
-@article{Kumar2011,
-abstract = {To catalog protein-altering mutations that may drive the development of prostate cancers and their progression to metastatic disease systematically, we performed whole-exome sequencing of 23 prostate cancers derived from 16 different lethal metastatic tumors and three high-grade primary carcinomas. All tumors were propagated in mice as xenografts, designated the LuCaP series, to model phenotypic variation, such as responses to cancer-directed therapeutics. Although corresponding normal tissue was not available for most tumors, we were able to take advantage of increasingly deep catalogs of human genetic variation to remove most germline variants. On average, each tumor genome contained [\~{}]200 novel nonsynonymous variants, of which the vast majority was specific to individual carcinomas. A subset of genes was recurrently altered across tumors derived from different individuals, including TP53, DLK2, GPC6, and SDF4. Unexpectedly, three prostate cancer genomes exhibited substantially higher mutation frequencies, with 2,000-4,000 novel coding variants per exome. A comparison of castration-resistant and castration-sensitive pairs of tumor lines derived from the same prostate cancer highlights mutations in the Wnt pathway as potentially contributing to the development of castration resistance. Collectively, our results indicate that point mutations arising in coding regions of advanced prostate cancers are common but, with notable exceptions, very few genes are mutated in a substantial fraction of tumors. We also report a previously undescribed subtype of prostate cancers exhibiting "hypermutated" genomes, with potential implications for resistance to cancer therapeutics. Our results also suggest that increasingly deep catalogs of human germline variation may challenge the necessity of sequencing matched tumor-normal pairs.},
-author = {Kumar, A. and White, T. A. and MacKenzie, A. P. and Clegg, N. and Lee, C. and Dumpit, R. F. and Coleman, I. and Ng, S. B. and Salipante, S. J. and Rieder, M. J. and Nickerson, D. A. and Corey, E. and Lange, P. H. and Morrissey, C. and Vessella, R. L. and Nelson, P. S. and Shendure, J.},
-doi = {10.1073/pnas.1108745108},
-file = {:home/gus/Documents/Mendeley Desktop/Kumar et al.\_2011\_Exome sequencing identifies a spectrum of mutation frequencies in advanced and lethal prostate cancers.pdf:pdf},
-issn = {0027-8424},
-journal = {Proceedings of the National Academy of Sciences},
-month = sep,
-number = {41},
-pages = {17087--17092},
-title = {{Exome sequencing identifies a spectrum of mutation frequencies in advanced and lethal prostate cancers}},
-url = {http://www.pnas.org/cgi/content/abstract/108/41/17087},
-volume = {108},
-year = {2011}
-}
-@article{Pop:2009fk,
-abstract = {Research into genome assembly algorithms has experienced a resurgence due to new challenges created by the development of next generation sequencing technologies. Several genome assemblers have been published in recent years specifically targeted at the new sequence data; however, the ever-changing technological landscape leads to the need for continued research. In addition, the low cost of next generation sequencing data has led to an increased use of sequencing in new settings. For example, the new field of metagenomics relies on large-scale sequencing of entire microbial communities instead of isolate genomes, leading to new computational challenges. In this article, we outline the major algorithmic approaches for genome assembly and describe recent developments in this domain.},
-author = {Pop, Mihai},
-doi = {10.1093/bib/bbp026},
-journal = {Brief Bioinform},
-month = jul,
-number = {4},
-pages = {354--366},
-pmid = {19482960},
-title = {{Genome assembly reborn: recent computational challenges}},
-volume = {10},
-year = {2009}
-}
-@article{Brummitt2012,
-abstract = {Understanding how interdependence among systems affects cascading behaviors is increasingly important across many fields of science and engineering. Inspired by cascades of load shedding in coupled electric grids and other infrastructure, we study the Bak-Tang-Wiesenfeld sandpile model on modular random graphs and on graphs based on actual, interdependent power grids. Starting from two isolated networks, adding some connectivity between them is beneficial, for it suppresses the largest cascades in each system. Too much interconnectivity, however, becomes detrimental for two reasons. First, interconnections open pathways for neighboring networks to inflict large cascades. Second, as in real infrastructure, new interconnections increase capacity and total possible load, which fuels even larger cascades. Using a multitype branching process and simulations we show these effects and estimate the optimal level of interconnectivity that balances their trade-offs. Such equilibria could allow, for example, power grid owners to minimize the largest cascades in their grid. We also show that asymmetric capacity among interdependent networks affects the optimal connectivity that each prefers and may lead to an arms race for greater capacity. Our multitype branching process framework provides building blocks for better prediction of cascading processes on modular random graphs and on multitype networks in general.},
-author = {Brummitt, Charles D and D'Souza, Raissa M and Leicht, E A},
-doi = {10.1073/pnas.1110586109},
-file = {:home/gus/Documents/Mendeley Desktop/Brummitt, D'Souza, Leicht\_2012\_Suppressing cascades of load in interdependent networks.pdf:pdf},
-issn = {1091-6490},
-journal = {Proceedings of the National Academy of Sciences of the United States of America},
-month = feb,
-number = {12},
-pages = {E680--689},
-pmid = {22355144},
-title = {{Suppressing cascades of load in interdependent networks.}},
-url = {http://www.pnas.org/cgi/content/abstract/109/12/E680},
-volume = {109},
-year = {2012}
-}
-@article{Schuenemann2011,
-abstract = {Although investigations of medieval plague victims have identified Yersinia pestis as the putative etiologic agent of the pandemic, methodological limitations have prevented large-scale genomic investigations to evaluate changes in the pathogen's virulence over time. We screened over 100 skeletal remains from Black Death victims of the East Smithfield mass burial site (1348-1350, London, England). Recent methods of DNA enrichment coupled with high-throughput DNA sequencing subsequently permitted reconstruction of ten full human mitochondrial genomes (16 kb each) and the full pPCP1 (9.6 kb) virulence-associated plasmid at high coverage. Comparisons of molecular damage profiles between endogenous human and Y. pestis DNA confirmed its authenticity as an ancient pathogen, thus representing the longest contiguous genomic sequence for an ancient pathogen to date. Comparison of our reconstructed plasmid against modern Y. pestis shows identity with several isolates matching the Medievalis biovar; however, our chromosomal sequences indicate the victims were infected with a Y. pestis variant that has not been previously reported. Our data reveal that the Black Death in medieval Europe was caused by a variant of Y. pestis that may no longer exist, and genetic data carried on its pPCP1 plasmid were not responsible for the purported epidemiological differences between ancient and modern forms of Y. pestis infections.},
-author = {Schuenemann, V. J. and Bos, K. and DeWitte, S. and Schmedes, S. and Jamieson, J. and Mittnik, A. and Forrest, S. and Coombes, B. K. and Wood, J. W. and Earn, D. J. D. and White, W. and Krause, J. and Poinar, H. N.},
-doi = {10.1073/pnas.1105107108},
-file = {:home/gus/Documents/Mendeley Desktop/Schuenemann et al.\_2011\_PNAS Plus Targeted enrichment of ancient pathogens yielding the pPCP1 plasmid of Yersinia pestis from victims of the Black Death.pdf:pdf},
-issn = {0027-8424},
-journal = {Proceedings of the National Academy of Sciences},
-month = aug,
-pages = {1105107108--},
-title = {{PNAS Plus: Targeted enrichment of ancient pathogens yielding the pPCP1 plasmid of Yersinia pestis from victims of the Black Death}},
-url = {http://www.pnas.org/cgi/content/abstract/1105107108v1},
-year = {2011}
-}
-@article{Ferragina2000,
-author = {Ferragina, P. and Manzini, G.},
-file = {:home/gus/Documents/Mendeley Desktop/Ferragina, Manzini\_2000\_Opportunistic data structures with applications.pdf:pdf},
-isbn = {0-7695-0850-2},
-keywords = {Glimpse tool,computational complexity,data compression,data indexing,data set,data structures,database indexing,database theory,entropy,opportunistic data structures,query performance,search,sublinear query time complexity,sublinear space complexity,succinct suffix array,suffix array data structures,suffix tree data structures},
-month = nov,
-pages = {390},
-title = {{Opportunistic data structures with applications}},
-url = {http://dl.acm.org/citation.cfm?id=795666.796543 http://www.di.unipi.it/~ferragin/Libraries/fmindexV2/index.html},
-year = {2000}
-}
-@article{David2011,
-abstract = {We report on a major update (version 2) of the original SHort Read Mapping Program (SHRiMP). SHRiMP2 primarily targets mapping sensitivity, and is able to achieve high accuracy at a very reasonable speed. SHRiMP2 supports both letter space and color space (AB/SOLiD) reads, enables for direct alignment of paired reads and uses parallel computation to fully utilize multi-core architectures. AVAILABILITY: SHRiMP2 executables and source code are freely available at: http://compbio.cs.toronto.edu/shrimp/.},
-author = {David, Matei and Dzamba, Misko and Lister, Dan and Ilie, Lucian and Brudno, Michael},
-doi = {10.1093/bioinformatics/btr046},
-file = {:home/gus/Documents/Mendeley Desktop/David et al.\_2011\_SHRiMP2 sensitive yet practical SHort Read Mapping.pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-keywords = {Algorithms,Chromosome Mapping,DNA,Genetic,Genomics,Genomics: methods,Polymorphism,Sequence Alignment,Sequence Analysis,Software},
-month = apr,
-number = {7},
-pages = {1011--2},
-pmid = {21278192},
-title = {{SHRiMP2: sensitive yet practical SHort Read Mapping.}},
-url = {http://www.ncbi.nlm.nih.gov/pubmed/21278192},
-volume = {27},
-year = {2011}
-}
-@article{Chong1993,
-author = {Chong, Ka Wong and Lam, Tak Wah},
-file = {:home/gus/Documents/Mendeley Desktop/Chong, Lam\_1993\_Finding connected components in O (log n loglog n ) time on the EREW PRAM.pdf:pdf},
-isbn = {0-89871-313-7},
-month = jan,
-pages = {11--20},
-title = {{Finding connected components in O (log n loglog n ) time on the EREW PRAM}},
-url = {http://dl.acm.org/citation.cfm?id=313559.313575},
-year = {1993}
-}
-@article{Rogers2012,
-abstract = {ABSTRACT: We propose a method for predicting splice graphs that enhances curated gene models using evidence from RNA-Seq and EST alignments. Results obtained using RNA-Seq experiments in Arabidopsis thaliana show that predictions made by our SpliceGrapher method are more consistent with current gene models than predictions made by TAU and Cufflinks. Furthermore, analysis of plant and human data indicates that the machine learning approach used by SpliceGrapher is useful for discriminating between real and spurious splice sites, and can improve the reliability of detection of alternative splicing. SpliceGrapher is available for download at http://SpliceGrapher.sf.net.},
-author = {Rogers, Mark F and Thomas, Julie and Reddy, Anireddy Sn and Ben-Hur, Asa},
-doi = {10.1186/gb-2012-13-1-r4},
-issn = {1465-6914},
-journal = {Genome biology},
-month = jan,
-number = {1},
-pages = {R4},
-pmid = {22293517},
-title = {{SpliceGrapher: detecting patterns of alternative splicing from RNA-Seq data in the context of gene models and EST data.}},
-url = {http://genomebiology.com/2012/13/1/R4},
-volume = {13},
-year = {2012}
-}
-@article{Manber1990,
-author = {Manber, Udi and Myers, Gene},
-file = {:home/gus/Documents/Mendeley Desktop/Manber, Myers\_1990\_Suffix arrays a new method for on-line string searches.pdf:pdf},
-isbn = {0-89871-251-3},
-journal = {Proceedings of the first annual ACM-SIAM  \ldots},
-month = jan,
-pages = {319--327},
-title = {{Suffix arrays: a new method for on-line string searches}},
-url = {http://portal.acm.org/citation.cfm?id=320218 http://dl.acm.org/citation.cfm?id=320176.320218},
-year = {1990}
-}
-@article{Venter2001,
-author = {Venter, JC and Adams, MD and Myers, EW},
-file = {:home/gus/Documents/Mendeley Desktop/Venter, Adams, Myers\_2001\_The sequence of the human genome.pdf:pdf},
-journal = {Science's \ldots},
-title = {{The sequence of the human genome}},
-url = {http://stke.sciencemag.org/cgi/content/abstract/sci;291/5507/1304},
-year = {2001}
-}
-@techreport{Drepper2007,
-author = {Drepper, Ulrich},
-file = {:home/gus/Documents/Mendeley Desktop/Drepper\_2007\_What Every Programmer Should Know About Memory.pdf:pdf},
-keywords = {Cache,Memory,lock free},
-title = {{What Every Programmer Should Know About Memory}},
-year = {2007}
-}
-@article{Almeida2007,
-author = {Almeida, Paulo S\'{e}rgio PS and Baquero, Carlos and Pregui\c{c}a, Nuno and Hutchison, David},
-file = {:home/gus/Documents/Mendeley Desktop//Almeida et al.\_2007\_Scalable Bloom Filters.pdf:pdf},
-issn = {0020-0190},
-journal = {Information Processing Letters},
-keywords = {Distributed systems,Randomized algorithms,bloom filters,data structures,dis-,expected,lower false positive rates,require more state},
-month = mar,
-number = {6},
-pages = {255--261},
-title = {{Scalable Bloom Filters}},
-url = {http://www.sciencedirect.com/science/article/pii/S0020019006003127},
-volume = {101},
-year = {2007}
-}
-@article{Liu2012,
-abstract = {SUMMARY: SOAP3 is the first short read alignment tool that leverages the multi-processors in a graphic processing unit (GPU) to achieve a drastic improvement in speed. We adapted the compressed full-text index (BWT) used by SOAP2 in view of the advantages and disadvantages of GPU. When tested with millions of Illumina Hiseq 2000 length-100bp reads, SOAP3 takes less than 30 seconds to align a million read pairs onto the human reference genome and is at least 7.5 and 20 times faster than BWA and Bowtie, respectively. For aligning reads with up to 4 mismatches, SOAP3 aligns slightly more reads than BWA and Bowtie; this is because SOAP3, unlike BWA and Bowtie, is not heuristic-based and always reports all answers. AVAILABILITY: SOAP3 is available at: http://www.cs.hku.hk/2bwt-tools/soap3; and http://soap.genomics.org.cn/soap3.html. CONTACT: liruiqiang@gmail.com, twlam@cs.hku.hk.},
-author = {Liu, Chi-Man and Wong, Thomas and Wu, Edward and Luo, Ruibang and Yiu, Siu-Ming and Li, Yingrui and Wang, B and Yu, C and Chu, X and Zhao, K and Li, Ruiqiang and Lam, Tak-Wah},
-doi = {10.1093/bioinformatics/bts061},
-file = {:home/gus/Documents/Mendeley Desktop/Liu et al.\_2012\_SOAP3 Ultra-fast GPU-based parallel alignment tool for short reads.pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-month = jan,
-number = {6},
-pages = {878--879},
-pmid = {22285832},
-title = {{SOAP3: Ultra-fast GPU-based parallel alignment tool for short reads.}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/28/6/878},
-volume = {28},
-year = {2012}
-}
-@book{Menon2011,
-address = {New York, New York, USA},
-author = {Menon, Rohith K. and Bhat, Goutham P. and Schatz, Michael C.},
-booktitle = {Proceedings of the second international workshop on MapReduce and its applications - MapReduce '11},
-doi = {10.1145/1996092.1996104},
-file = {:home/gus/Documents/Mendeley Desktop/Menon, Bhat, Schatz\_2011\_Rapid parallel genome indexing with MapReduce.pdf:pdf},
-isbn = {9781450307000},
-keywords = {DNA sequence analysis,MapReduce,burrows-wheeler transform,cloud computing,parallel suffix array construction},
-month = jun,
-pages = {51},
-publisher = {ACM Press},
-title = {{Rapid parallel genome indexing with MapReduce}},
-url = {http://dl.acm.org/citation.cfm?id=1996092.1996104},
-year = {2011}
-}
-@article{Nakamura2011,
-abstract = {We identified the sequence-specific starting positions of consecutive miscalls in the mapping of reads obtained from the Illumina Genome Analyser (GA). Detailed analysis of the miscall pattern indicated that the underlying mechanism involves sequence-specific interference of the base elongation process during sequencing. The two major sequence patterns that trigger this sequence-specific error (SSE) are: (i) inverted repeats and (ii) GGC sequences. We speculate that these sequences favor dephasing by inhibiting single-base elongation, by: (i) folding single-stranded DNA and (ii) altering enzyme preference. This phenomenon is a major cause of sequence coverage variability and of the unfavorable bias observed for population-targeted methods such as RNA-seq and ChIP-seq. Moreover, SSE is a potential cause of false single-nucleotide polymorphism (SNP) calls and also significantly hinders de novo assembly. This article highlights the importance of recognizing SSE and its underlying mechanisms in the hope of enhancing the potential usefulness of the Illumina sequencers.},
-author = {Nakamura, Kensuke and Oshima, Taku and Morimoto, Takuya and Ikeda, Shun and Yoshikawa, Hirofumi and Shiwa, Yuh and Ishikawa, Shu and Linak, Margaret C and Hirai, Aki and Takahashi, Hiroki and Altaf-Ul-Amin, Md and Ogasawara, Naotake and Kanaya, Shigehiko},
-doi = {10.1093/nar/gkr344},
-file = {:home/gus/Documents/Mendeley Desktop/Nakamura et al.\_2011\_Sequence-specific error profile of Illumina sequencers.pdf:pdf},
-issn = {1362-4962},
-journal = {Nucleic acids research},
-month = may,
-number = {13},
-pages = {e90--},
-pmid = {21576222},
-title = {{Sequence-specific error profile of Illumina sequencers.}},
-url = {http://nar.oxfordjournals.org/cgi/content/abstract/39/13/e90},
-volume = {39},
-year = {2011}
-}
-@article{Edgar2004,
-abstract = {We describe MUSCLE, a new computer program for creating multiple alignments of protein sequences. Elements of the algorithm include fast distance estimation using kmer counting, progressive alignment using a new profile function we call the log-expectation score, and refinement using tree-dependent restricted partitioning. The speed and accuracy of MUSCLE are compared with T-Coffee, MAFFT and CLUSTALW on four test sets of reference alignments: BAliBASE, SABmark, SMART and a new benchmark, PREFAB. MUSCLE achieves the highest, or joint highest, rank in accuracy on each of these sets. Without refinement, MUSCLE achieves average accuracy statistically indistinguishable from T-Coffee and MAFFT, and is the fastest of the tested methods for large numbers of sequences, aligning 5000 sequences of average length 350 in 7 min on a current desktop computer. The MUSCLE program, source code and PREFAB test data are freely available at http://www.drive5. com/muscle.},
-author = {Edgar, Robert C},
-doi = {10.1093/nar/gkh340},
-file = {:home/gus/Documents/Mendeley Desktop/Edgar\_2004\_MUSCLE multiple sequence alignment with high accuracy and high throughput.pdf:pdf},
-issn = {1362-4962},
-journal = {Nucleic acids research},
-keywords = {Algorithms,Amino Acid Motifs,Amino Acid Sequence,Internet,Molecular Sequence Data,Reproducibility of Results,Sequence Alignment,Sequence Alignment: methods,Sequence Analysis, Protein,Sequence Analysis, Protein: methods,Software,Time Factors},
-month = jan,
-number = {5},
-pages = {1792--7},
-pmid = {15034147},
-title = {{MUSCLE: multiple sequence alignment with high accuracy and high throughput.}},
-url = {http://nar.oxfordjournals.org/cgi/content/abstract/32/5/1792},
-volume = {32},
-year = {2004}
-}
-@article{Manber1990,
-author = {Manber, Udi and Myers, Gene},
-file = {:home/gus/Documents/Mendeley Desktop/Manber, Myers\_1990\_Suffix arrays a new method for on-line string searches(2).pdf:pdf;:home/gus/Documents/Mendeley Desktop/Manber, Myers\_1990\_Suffix arrays a new method for on-line string searches.pdf:pdf},
-isbn = {0-89871-251-3},
-journal = {Proceedings of the first annual ACM-SIAM \ldots},
-month = jan,
-pages = {319--327},
-title = {{Suffix arrays: a new method for on-line string searches}},
-url = {http://portal.acm.org/citation.cfm?id=320218 http://dl.acm.org/citation.cfm?id=320176.320218},
-year = {1990}
-}
-@article{Trapnell2010,
-abstract = {High-throughput mRNA sequencing (RNA-Seq) promises simultaneous transcript discovery and abundance estimation. However, this would require algorithms that are not restricted by prior gene annotations and that account for alternative transcription and splicing. Here we introduce such algorithms in an open-source software program called Cufflinks. To test Cufflinks, we sequenced and analyzed >430 million paired 75-bp RNA-Seq reads from a mouse myoblast cell line over a differentiation time series. We detected 13,692 known transcripts and 3,724 previously unannotated ones, 62\% of which are supported by independent expression data or by homologous genes in other species. Over the time series, 330 genes showed complete switches in the dominant transcription start site (TSS) or splice isoform, and we observed more subtle shifts in 1,304 other genes. These results suggest that Cufflinks can illuminate the substantial regulatory flexibility and complexity in even this well-studied model of muscle development and that it can improve transcriptome-based genome annotation.},
-author = {Trapnell, Cole and Williams, Brian A and Pertea, Geo and Mortazavi, Ali and Kwan, Gordon and van Baren, Marijke J and Salzberg, Steven L and Wold, Barbara J and Pachter, Lior},
-doi = {10.1038/nbt.1621},
-issn = {1546-1696},
-journal = {Nature biotechnology},
-keywords = {Algorithms,Animals,Cell Differentiation,Cell Differentiation: genetics,Cell Line,Gene Expression Profiling,Gene Expression Profiling: methods,Genome,Messenger,Messenger: analysis,Messenger: genetics,Messenger: metabolism,Mice,Oligonucleotide Array Sequence Analysis,Oligonucleotide Array Sequence Analysis: methods,Protein Isoforms,Protein Isoforms: genetics,Protein Isoforms: metabolism,Proto-Oncogene Proteins c-myc,Proto-Oncogene Proteins c-myc: genetics,Proto-Oncogene Proteins c-myc: metabolism,RNA,RNA: methods,Sequence Analysis,Software},
-month = may,
-number = {5},
-pages = {511--5},
-pmid = {20436464},
-publisher = {Nature Publishing Group},
-shorttitle = {Nat Biotech},
-title = {{Transcript assembly and quantification by RNA-Seq reveals unannotated transcripts and isoform switching during cell differentiation.}},
-url = {http://dx.doi.org/10.1038/nbt.1621},
-volume = {28},
-year = {2010}
-}
-@article{Gnerre:2011zr,
-abstract = {Massively parallel DNA sequencing technologies are revolutionizing genomics by making it possible to generate billions of relatively short (\~{}100-base) sequence reads at very low cost. Whereas such data can be readily used for a wide range of biomedical applications, it has proven difficult to use them to generate high-quality de novo genome assemblies of large, repeat-rich vertebrate genomes. To date, the genome assemblies generated from such data have fallen far short of those obtained with the older (but much more expensive) capillary-based sequencing approach. Here, we report the development of an algorithm for genome assembly, ALLPATHS-LG, and its application to massively parallel DNA sequence data from the human and mouse genomes, generated on the Illumina platform. The resulting draft genome assemblies have good accuracy, short-range contiguity, long-range connectivity, and coverage of the genome. In particular, the base accuracy is high (≥99.95\%) and the scaffold sizes (N50 size = 11.5 Mb for human and 7.2 Mb for mouse) approach those obtained with capillary-based sequencing. The combination of improved sequencing technology and improved computational methods should now make it possible to increase dramatically the de novo sequencing of large genomes. The ALLPATHS-LG program is available at http://www.broadinstitute.org/science/programs/genome-biology/crd.},
-author = {Gnerre, Sante and Maccallum, Iain and Przybylski, Dariusz and Ribeiro, Filipe J and Burton, Joshua N and Walker, Bruce J and Sharpe, Ted and Hall, Giles and Shea, Terrance P and Sykes, Sean and Berlin, Aaron M and Aird, Daniel and Costello, Maura and Daza, Riza and Williams, Louise and Nicol, Robert and Gnirke, Andreas and Nusbaum, Chad and Lander, Eric S and Jaffe, David B},
-doi = {10.1073/pnas.1017351108},
-journal = {Proc Natl Acad Sci U S A},
-month = jan,
-number = {4},
-pages = {1513--1518},
-pmid = {21187386},
-title = {{High-quality draft assemblies of mammalian genomes from massively parallel sequence data}},
-volume = {108},
-year = {2011}
-}
-@article{Marsaglia2003,
-abstract = {Description of a class of simple, extremely fast random number generators (RNGs) with periods 2 k - 1 for k = 32, 64, 96, 128, 160, 192. These RNGs seem to pass tests of randomness very well.},
-author = {Marsaglia, George},
-file = {:home/gus/Documents/Mendeley Desktop/Marsaglia\_2003\_Xorshift RNGs.pdf:pdf},
-issn = {15487660},
-journal = {Journal Of Statistical Software},
-number = {14},
-pages = {1--6},
-publisher = {American Statistical Association},
-title = {{Xorshift RNGs}},
-url = {http://www.jstatsoft.org/v08/i14/paper},
-volume = {8},
-year = {2003}
-}
-@article{herlihy2002repeat,
-author = {Herlihy, M. and Luchangco, V. and Moir, M.},
-file = {:home/gus/Documents/Mendeley Desktop/Herlihy, Luchangco, Moir\_2002\_The repeat offender problem A mechanism for supporting dynamic-sized lock-free data structures.pdf:pdf},
-publisher = {Sun Microsystems, Inc.},
-title = {{The repeat offender problem: A mechanism for supporting dynamic-sized lock-free data structures}},
-url = {http://portal.acm.org/citation.cfm?id=1698158},
-year = {2002}
-}
-@article{Kelley:2010fk,
-abstract = {ABSTRACT : We introduce Quake, a program to detect and correct errors in DNA sequencing reads. Using a maximum likelihood approach incorporating quality values and nucleotide specific miscall rates, Quake achieves the highest accuracy on realistically simulated reads. We further demonstrate substantial improvements in de novo assembly and SNP detection after using Quake. Quake can be used for any size project, including more than one billion human reads, and is freely available as open source software from http://www.cbcb.umd.edu/software/quake.},
-author = {Kelley, David R and Schatz, Michael C and Salzberg, Steven L},
-doi = {10.1186/gb-2010-11-11-r116},
-file = {:home/gus/Documents/Mendeley Desktop/Kelley, Schatz, Salzberg\_2010\_Quake quality-aware detection and correction of sequencing errors.pdf:pdf},
-journal = {Genome Biol},
-number = {11},
-pages = {R116},
-pmid = {21114842},
-title = {{Quake: quality-aware detection and correction of sequencing errors}},
-volume = {11},
-year = {2010}
-}
-@article{Qi2008,
-abstract = {The yeast synthetic lethal genetic interaction network contains rich information about underlying pathways and protein complexes as well as new genetic interactions yet to be discovered. We have developed a graph diffusion kernel as a unified framework for inferring complex/pathway membership analogous to "friends" and genetic interactions analogous to "enemies" from the genetic interaction network. When applied to the Saccharomyces cerevisiae synthetic lethal genetic interaction network, we can achieve a precision around 50\% with 20\% to 50\% recall in the genome-wide prediction of new genetic interactions, supported by experimental validation. The kernels show significant improvement over previous best methods for predicting genetic interactions and protein co-complex membership from genetic interaction data.},
-author = {Qi, Yan and Suhail, Yasir and Lin, Yu-yi and Boeke, Jef D and Bader, Joel S},
-doi = {10.1101/gr.077693.108},
-file = {:home/gus/Documents/Mendeley Desktop/Qi et al.\_2008\_Finding friends and enemies in an enemies-only network a graph diffusion kernel for predicting novel genetic interactions and co-complex membership from yeast genetic interactions.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Fungal,Gene Expression Regulation,Genes,Genetic,Genomics,Genomics: methods,Models,Protein Interaction Mapping,Protein Interaction Mapping: methods,Reproducibility of Results,Saccharomyces cerevisiae,Saccharomyces cerevisiae Proteins,Saccharomyces cerevisiae Proteins: genetics,Saccharomyces cerevisiae Proteins: metabolism,Saccharomyces cerevisiae: genetics,Saccharomyces cerevisiae: metabolism,Statistical},
-month = dec,
-number = {12},
-pages = {1991--2004},
-pmid = {18832443},
-title = {{Finding friends and enemies in an enemies-only network: a graph diffusion kernel for predicting novel genetic interactions and co-complex membership from yeast genetic interactions.}},
-url = {http://genome.cshlp.org/cgi/content/abstract/18/12/1991},
-volume = {18},
-year = {2008}
-}
-@misc{TheMendeleySupportTeam2011,
-abstract = {A quick introduction to Mendeley. Learn how Mendeley creates your personal digital library, how to organize and annotate documents, how to collaborate and share with colleagues, and how to generate citations and bibliographies.},
-address = {London},
-author = {{The Mendeley Support Team}},
-booktitle = {Mendeley Desktop},
-file = {:home/gus/Documents/Mendeley Desktop/The Mendeley Support Team\_2011\_Getting Started with Mendeley.pdf:pdf},
-keywords = {Mendeley,how-to,user manual},
-pages = {1--16},
-publisher = {Mendeley Ltd.},
-title = {{Getting Started with Mendeley}},
-url = {http://www.mendeley.com},
-year = {2011}
-}
-@article{Chaisson2008,
-abstract = {In the last year, high-throughput sequencing technologies have progressed from proof-of-concept to production quality. While these methods produce high-quality reads, they have yet to produce reads comparable in length to Sanger-based sequencing. Current fragment assembly algorithms have been implemented and optimized for mate-paired Sanger-based reads, and thus do not perform well on short reads produced by short read technologies. We present a new Eulerian assembler that generates nearly optimal short read assemblies of bacterial genomes and describe an approach to assemble reads in the case of the popular hybrid protocol when short and long Sanger-based reads are combined.},
-author = {Chaisson, Mark J and Pevzner, Pavel A},
-doi = {10.1101/gr.7088808},
-file = {:home/gus/Documents/Mendeley Desktop/Chaisson, Pevzner\_2008\_Short read fragment assembly of bacterial genomes.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Bacterial,Bacterial: genetics,Contig Mapping,Contig Mapping: methods,DNA,DNA: methods,Genome,Genomics,Genomics: methods,Research Design,Sequence Analysis},
-month = feb,
-number = {2},
-pages = {324--30},
-pmid = {18083777},
-title = {{Short read fragment assembly of bacterial genomes.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2203630\&tool=pmcentrez\&rendertype=abstract},
-volume = {18},
-year = {2008}
-}
-@article{Scally2012,
-author = {Scally, Aylwyn and Dutheil, Julien Y. and Hillier, LaDeana W. and Jordan, Gregory E. and Goodhead, Ian and Herrero, Javier and Hobolth, Asger and Lappalainen, Tuuli and Mailund, Thomas and Marques-Bonet, Tomas and McCarthy, Shane and Montgomery, Stephen H. and Schwalie, Petra C. and Tang, Y. Amy and Ward, Michelle C. and Xue, Yali and Yngvadottir, Bryndis and Alkan, Can and Andersen, Lars N. and Ayub, Qasim and Ball, Edward V. and Beal, Kathryn and Bradley, Brenda J. and Chen, Yuan and Clee, Chris M. and Fitzgerald, Stephen and Graves, Tina A. and Gu, Yong and Heath, Paul and Heger, Andreas and Karakoc, Emre and Kolb-Kokocinski, Anja and Laird, Gavin K. and Lunter, Gerton and Meader, Stephen and Mort, Matthew and Mullikin, James C. and Munch, Kasper and O’Connor, Timothy D. and Phillips, Andrew D. and Prado-Martinez, Javier and Rogers, Anthony S. and Sajjadian, Saba and Schmidt, Dominic and Shaw, Katy and Simpson, Jared T. and Stenson, Peter D. and Turner, Daniel J. and Vigilant, Linda and Vilella, Albert J. and Whitener, Weldon and Zhu, Baoli and Cooper, David N. and de Jong, Pieter and Dermitzakis, Emmanouil T. and Eichler, Evan E. and Flicek, Paul and Goldman, Nick and Mundy, Nicholas I. and Ning, Zemin and Odom, Duncan T. and Ponting, Chris P. and Quail, Michael A. and Ryder, Oliver A. and Searle, Stephen M. and Warren, Wesley C. and Wilson, Richard K. and Schierup, Mikkel H. and Rogers, Jane and Tyler-Smith, Chris and Durbin, Richard},
-doi = {10.1038/nature10842},
-file = {:home/gus/Documents/Mendeley Desktop/Scally et al.\_2012\_Insights into hominid evolution from the gorilla genome sequence.pdf:pdf;:home/gus/Documents/Mendeley Desktop/Scally et al.\_2012\_Insights into hominid evolution from the gorilla genome sequence(3).pdf:pdf},
-issn = {0028-0836},
-journal = {Nature},
-month = mar,
-number = {7388},
-pages = {169--175},
-publisher = {Nature Publishing Group, a division of Macmillan Publishers Limited. All Rights Reserved.},
-shorttitle = {Nature},
-title = {{Insights into hominid evolution from the gorilla genome sequence}},
-url = {http://dx.doi.org/10.1038/nature10842},
-volume = {483},
-year = {2012}
-}
-@article{Richter2008,
-abstract = {The new research field of metagenomics is providing exciting insights into various, previously unclassified ecological systems. Next-generation sequencing technologies are producing a rapid increase of environmental data in public databases. There is great need for specialized software solutions and statistical methods for dealing with complex metagenome data sets.},
-author = {Richter, Daniel C and Ott, Felix and Auch, Alexander F and Schmid, Ramona and Huson, Daniel H},
-doi = {10.1371/journal.pone.0003373},
-editor = {Field, Dawn},
-file = {:home/gus/Documents/Mendeley Desktop/Richter et al.\_2008\_MetaSim a sequencing simulator for genomics and metagenomics.pdf:pdf},
-issn = {1932-6203},
-journal = {PloS one},
-keywords = {Databases, Genetic,Genomics,Models, Theoretical,User-Computer Interface},
-month = jan,
-number = {10},
-pages = {e3373},
-pmid = {18841204},
-publisher = {Public Library of Science},
-title = {{MetaSim: a sequencing simulator for genomics and metagenomics.}},
-url = {http://dx.plos.org/10.1371/journal.pone.0003373},
-volume = {3},
-year = {2008}
-}
-@article{Peterlongo2011,
-abstract = {Background: The analysis of next-generation sequencing data from large genomes is a timely research topic. Sequencers are producing billions of short sequence fragments from newly sequenced organisms. Computational methods for reconstructing sequences (whole-genome assemblers) are typically employed to process such data. However, one of the main drawback of these methods is the high memory requirement. Results: We present Mapsembler, an iterative targeted assembler which processes large datasets of reads on commodity hardware. Mapsembler checks for the presence of given regions of interest in the reads and reconstructs their neighborhood, either as a plain sequence (consensus) or as a graph (full sequence structure). We introduce new algorithms to retrieve homologues of a sequence from reads and construct an extension graph. Conclusions: Mapsembler is the rst software that enables de novo discovery around a region of interest of gene homologues, SNPs, exon skipping as well as other structural events, directly from raw sequencing reads. Compared to traditional assembly software, memory requirement and execution time of Mapsembler are considerably lower, as data indexing is localized. Mapsembler can be used at http://mapsembler.genouest.org},
-author = {Peterlongo, Pierre and Chikhi, Rayan},
-file = {:home/gus/Documents/Mendeley Desktop/Peterlongo, Chikhi\_2011\_Mapsembler, targeted assembly of larges genomes on a desktop computer.pdf:pdf},
-keywords = {NGS,algorithms,bioinformatics,genome,light memory usage,targeted assembly},
-month = mar,
-title = {{Mapsembler, targeted assembly of larges genomes on a desktop computer}},
-url = {http://hal.inria.fr/inria-00577218/ http://hal.inria.fr/docs/00/57/72/18/PDF/RR-7565.pdf},
-year = {2011}
-}
-@article{michael2004hazard,
-author = {Michael, M.M.},
-file = {:home/gus/Documents/Mendeley Desktop/Michael\_2004\_Hazard pointers Safe memory reclamation for lock-free objects.pdf:pdf},
-journal = {Parallel and Distributed Systems, IEEE Transactions on},
-number = {6},
-pages = {491--504},
-publisher = {IEEE},
-title = {{Hazard pointers: Safe memory reclamation for lock-free objects}},
-url = {http://ieeexplore.ieee.org/xpls/abs\_all.jsp?arnumber=1291819},
-volume = {15},
-year = {2004}
-}
-@article{Yang2011a,
-abstract = {High-throughput short read sequencing is revolutionizing genomics and systems biology research by enabling cost-effective deep coverage sequencing of genomes and transcriptomes. Error detection and correction are crucial to many short read sequencing applications including de novo genome sequencing, genome resequencing, and digital gene expression analysis. Short read error detection is typically carried out by counting the observed frequencies of kmers in reads and validating those with frequencies exceeding a threshold. In case of genomes with high repeat content, an erroneous kmer may be frequently observed if it has few nucleotide differences with valid kmers with multiple occurrences in the genome. Error detection and correction were mostly applied to genomes with low repeat content and this remains a challenging problem for genomes with high repeat content.},
-author = {Yang, Xiao and Aluru, Srinivas and Dorman, Karin S},
-doi = {10.1186/1471-2105-12-S1-S52},
-file = {:home/gus/Documents/Mendeley Desktop//Yang, Aluru, Dorman\_2011\_Repeat-aware modeling and correction of short read errors.pdf:pdf},
-issn = {1471-2105},
-journal = {BMC bioinformatics},
-keywords = {Algorithms,Computational Biology,Computational Biology: methods,Genomics,Genomics: methods,High-Throughput Nucleotide Sequencing,High-Throughput Nucleotide Sequencing: methods,Likelihood Functions,Models,Software,Statistical},
-month = jan,
-pages = {S52},
-pmid = {21342585},
-title = {{Repeat-aware modeling and correction of short read errors.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=3044310\&tool=pmcentrez\&rendertype=abstract},
-volume = {12 Suppl 1},
-year = {2011}
-}
-@article{Roberts12122004,
-abstract = {Motivation: Comparison of nucleic acid and protein sequences is a fundamental tool of modern bioinformatics. A dominant method of such string matching is the ‘seed-and-extend’ approach, in which occurrences of short subsequences called ‘seeds’ are used to search for potentially longer matches in a large database of sequences. Each such potential match is then checked to see if it extends beyond the seed. To be effective, the seed-and-extend approach needs to catalogue seeds from virtually every substring in the database of search strings. Projects such as mammalian genome assemblies and large-scale protein matching, however, have such large sequence databases that the resulting list of seeds cannot be stored in RAM on a single computer. This significantly slows the matching process.Results: We present a simple and elegant method in which only a small fraction of seeds, called ‘minimizers’, needs to be stored. Using minimizers can speed up string-matching computations by a large factor while missing only a small fraction of the matches found using all seeds.},
-author = {Roberts, Michael and Hayes, Wayne and Hunt, Brian R and Mount, Stephen M and Yorke, James A},
-doi = {10.1093/bioinformatics/bth408},
-file = {:home/gus/Documents/Mendeley Desktop/Roberts et al.\_2004\_Reducing storage requirements for biological sequence comparison(2).pdf:pdf},
-issn = {1367-4803},
-journal = {Bioinformatics},
-keywords = {Algorithms,Computer-Assisted,Databases,Genetic,Information Storage and Retrieval,Information Storage and Retrieval: methods,Numerical Analysis,Sequence Alignment,Sequence Alignment: methods,Sequence Analysis,Sequence Analysis: methods},
-month = dec,
-number = {18},
-pages = {3363--3369},
-pmid = {15256412},
-title = {{Reducing storage requirements for biological sequence comparison}},
-url = {http://bioinformatics.oxfordjournals.org/content/20/18/3363.short},
-volume = {20},
-year = {2004}
-}
-@article{Zhao2011,
-author = {Zhao, Z and Yin, J and Li, Y},
-file = {:home/gus/Documents/Mendeley Desktop/Zhao, Yin, Li\_2011\_An efficient hybrid approach to correcting errors in short reads.pdf:pdf},
-journal = {Modeling Decision for Artificial \ldots},
-title = {{An efficient hybrid approach to correcting errors in short reads}},
-url = {http://www.springerlink.com/index/P53757J416772662.pdf},
-year = {2011}
-}
-@article{Scally2012,
-author = {Scally, Aylwyn and Dutheil, Julien Y. and Hillier, LaDeana W. and Jordan, Gregory E. and Goodhead, Ian and Herrero, Javier and Hobolth, Asger and Lappalainen, Tuuli and Mailund, Thomas and Marques-Bonet, Tomas and McCarthy, Shane and Montgomery, Stephen H. and Schwalie, Petra C. and Tang, Y. Amy and Ward, Michelle C. and Xue, Yali and Yngvadottir, Bryndis and Alkan, Can and Andersen, Lars N. and Ayub, Qasim and Ball, Edward V. and Beal, Kathryn and Bradley, Brenda J. and Chen, Yuan and Clee, Chris M. and Fitzgerald, Stephen and Graves, Tina A. and Gu, Yong and Heath, Paul and Heger, Andreas and Karakoc, Emre and Kolb-Kokocinski, Anja and Laird, Gavin K. and Lunter, Gerton and Meader, Stephen and Mort, Matthew and Mullikin, James C. and Munch, Kasper and O’Connor, Timothy D. and Phillips, Andrew D. and Prado-Martinez, Javier and Rogers, Anthony S. and Sajjadian, Saba and Schmidt, Dominic and Shaw, Katy and Simpson, Jared T. and Stenson, Peter D. and Turner, Daniel J. and Vigilant, Linda and Vilella, Albert J. and Whitener, Weldon and Zhu, Baoli and Cooper, David N. and de Jong, Pieter and Dermitzakis, Emmanouil T. and Eichler, Evan E. and Flicek, Paul and Goldman, Nick and Mundy, Nicholas I. and Ning, Zemin and Odom, Duncan T. and Ponting, Chris P. and Quail, Michael A. and Ryder, Oliver A. and Searle, Stephen M. and Warren, Wesley C. and Wilson, Richard K. and Schierup, Mikkel H. and Rogers, Jane and Tyler-Smith, Chris and Durbin, Richard},
-doi = {10.1038/nature10842},
-file = {:home/gus/Documents/Mendeley Desktop/Scally et al.\_2012\_Insights into hominid evolution from the gorilla genome sequence.pdf:pdf},
-issn = {0028-0836},
-journal = {Nature},
-month = mar,
-number = {7388},
-pages = {169--175},
-publisher = {Nature Publishing Group, a division of Macmillan Publishers Limited. All Rights Reserved.},
-shorttitle = {Nature},
-title = {{Insights into hominid evolution from the gorilla genome sequence}},
-url = {http://dx.doi.org/10.1038/nature10842},
-volume = {483},
-year = {2012}
-}
-@article{Pevzner:2001uq,
-abstract = {For the last 20 years, fragment assembly in DNA sequencing followed the "overlap-layout-consensus" paradigm that is used in all currently available assembly tools. Although this approach proved useful in assembling clones, it faces difficulties in genomic shotgun assembly. We abandon the classical "overlap-layout-consensus" approach in favor of a new euler algorithm that, for the first time, resolves the 20-year-old "repeat problem" in fragment assembly. Our main result is the reduction of the fragment assembly to a variation of the classical Eulerian path problem that allows one to generate accurate solutions of large-scale sequencing problems. euler, in contrast to the celera assembler, does not mask such repeats but uses them instead as a powerful fragment assembly tool.},
-author = {Pevzner, P A and Tang, H and Waterman, M S},
-doi = {10.1073/pnas.171285098},
-file = {:home/gus/Documents/Mendeley Desktop/Pevzner, Tang, Waterman\_2001\_An Eulerian path approach to DNA fragment assembly.pdf:pdf},
-journal = {Proc Natl Acad Sci U S A},
-month = aug,
-number = {17},
-pages = {9748--9753},
-pmid = {11504945},
-title = {{An Eulerian path approach to DNA fragment assembly}},
-volume = {98},
-year = {2001}
-}
-@article{nagarajan2009parametric,
-author = {Nagarajan, N. and Pop, M.},
-file = {:home/gus/Documents/Mendeley Desktop/Nagarajan, Pop\_2009\_Parametric complexity of sequence assembly theory and applications to next generation sequencing.pdf:pdf},
-journal = {Journal of computational biology},
-number = {7},
-pages = {897--908},
-publisher = {Mary Ann Liebert, Inc. 140 Huguenot Street, 3rd Floor New Rochelle, NY 10801 USA},
-title = {{Parametric complexity of sequence assembly: theory and applications to next generation sequencing}},
-url = {http://www.liebertonline.com/doi/abs/10.1089/cmb.2009.0005},
-volume = {16},
-year = {2009}
-}
-@inproceedings{Fomitchev2004,
-address = {New York, New York, USA},
-annote = {http://drdobbs.com/parallel/208801371},
-author = {Fomitchev, Mikhail and Ruppert, Eric},
-booktitle = {Proceedings of the twenty-third annual ACM symposium on Principles of distributed computing - PODC '04},
-doi = {10.1145/1011767.1011776},
-file = {:home/gus/Documents/Mendeley Desktop/Fomitchev, Ruppert\_2004\_Lock-free linked lists and skip lists.pdf:pdf},
-isbn = {1581138024},
-keywords = {amortized analysis,analysis,distributed,efficient,fault-tolerant,linked list,lock-free,skip list},
-month = jul,
-pages = {50},
-publisher = {ACM Press},
-title = {{Lock-free linked lists and skip lists}},
-url = {http://dl.acm.org/citation.cfm?id=1011767.1011776},
-year = {2004}
-}
-@article{Trapnell2009,
-abstract = {A new protocol for sequencing the messenger RNA in a cell, known as RNA-Seq, generates millions of short sequence fragments in a single run. These fragments, or 'reads', can be used to measure levels of gene expression and to identify novel splice variants of genes. However, current software for aligning RNA-Seq data to a genome relies on known splice junctions and cannot identify novel ones. TopHat is an efficient read-mapping algorithm designed to align reads from an RNA-Seq experiment to a reference genome without relying on known splice sites.},
-author = {Trapnell, Cole and Pachter, Lior and Salzberg, Steven L},
-doi = {10.1093/bioinformatics/btp120},
-file = {:home/gus/Documents/Mendeley Desktop/Trapnell, Pachter, Salzberg\_2009\_TopHat discovering splice junctions with RNA-Seq(2).pdf:pdf;:home/gus/Documents/Mendeley Desktop/Trapnell, Pachter, Salzberg\_2009\_TopHat discovering splice junctions with RNA-Seq.pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-keywords = {Algorithms,Gene Expression Profiling,Gene Expression Profiling: methods,Genetic,Messenger,Models,RNA,RNA Splicing,RNA Splicing: genetics,Sequence Alignment,Sequence Analysis,Software},
-month = may,
-number = {9},
-pages = {1105--11},
-pmid = {19289445},
-title = {{TopHat: discovering splice junctions with RNA-Seq.}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/25/9/1105},
-volume = {25},
-year = {2009}
-}
-@article{Gnerre:2011zr,
-abstract = {Massively parallel DNA sequencing technologies are revolutionizing genomics by making it possible to generate billions of relatively short (\~{}100-base) sequence reads at very low cost. Whereas such data can be readily used for a wide range of biomedical applications, it has proven difficult to use them to generate high-quality de novo genome assemblies of large, repeat-rich vertebrate genomes. To date, the genome assemblies generated from such data have fallen far short of those obtained with the older (but much more expensive) capillary-based sequencing approach. Here, we report the development of an algorithm for genome assembly, ALLPATHS-LG, and its application to massively parallel DNA sequence data from the human and mouse genomes, generated on the Illumina platform. The resulting draft genome assemblies have good accuracy, short-range contiguity, long-range connectivity, and coverage of the genome. In particular, the base accuracy is high (≥99.95\%) and the scaffold sizes (N50 size = 11.5 Mb for human and 7.2 Mb for mouse) approach those obtained with capillary-based sequencing. The combination of improved sequencing technology and improved computational methods should now make it possible to increase dramatically the de novo sequencing of large genomes. The ALLPATHS-LG program is available at http://www.broadinstitute.org/science/programs/genome-biology/crd.},
-annote = {
-        From Duplicate 2 ( 
-        
-        
-          High-quality draft assemblies of mammalian genomes from massively parallel sequence data
-        
-        
-         - Gnerre, Sante; Maccallum, Iain; Przybylski, Dariusz; Ribeiro, Filipe J; Burton, Joshua N; Walker, Bruce J; Sharpe, Ted; Hall, Giles; Shea, Terrance P; Sykes, Sean; Berlin, Aaron M; Aird, Daniel; Costello, Maura; Daza, Riza; Williams, Louise; Nicol, Robert; Gnirke, Andreas; Nusbaum, Chad; Lander, Eric S; Jaffe, David B )
-
-        
-        
-
-        
-
-        
-
-      },
-author = {Gnerre, Sante and Maccallum, Iain and Przybylski, Dariusz and Ribeiro, Filipe J and Burton, Joshua N and Walker, Bruce J and Sharpe, Ted and Hall, Giles and Shea, Terrance P and Sykes, Sean and Berlin, Aaron M and Aird, Daniel and Costello, Maura and Daza, Riza and Williams, Louise and Nicol, Robert and Gnirke, Andreas and Nusbaum, Chad and Lander, Eric S and Jaffe, David B},
-doi = {10.1073/pnas.1017351108},
-file = {:home/gus/Documents/Mendeley Desktop/Gnerre et al.\_2011\_High-quality draft assemblies of mammalian genomes from massively parallel sequence data.pdf:pdf;::},
-issn = {1091-6490},
-journal = {Proc Natl Acad Sci U S A},
-keywords = {Algorithms,Animals,DNA,DNA: methods,Genome,Genome: genetics,Genomics,Genomics: methods,Humans,Internet,Mice,Reproducibility of Results,Sequence Analysis,Software},
-month = jan,
-number = {4},
-pages = {1513--1518},
-pmid = {21187386},
-title = {{High-quality draft assemblies of mammalian genomes from massively parallel sequence data}},
-url = {http://www.pnas.org/cgi/content/abstract/108/4/1513},
-volume = {108},
-year = {2011}
-}
-@article{zhao2011psaec,
-author = {Zhao, Z. and Yin, J. and Zhan, Y. and Xiong, W. and Li, Y. and Liu, F.},
-file = {:home/gus/Documents/Mendeley Desktop/Zhao et al.\_2011\_PSAEC An Improved Algorithm for Short Read Error Correction Using Partial Suffix Arrays.pdf:pdf},
-journal = {Frontiers in Algorithmics and Algorithmic Aspects in Information and Management},
-pages = {220--232},
-publisher = {Springer},
-title = {{PSAEC: An Improved Algorithm for Short Read Error Correction Using Partial Suffix Arrays}},
-url = {http://www.springerlink.com/index/9L77826718445828.pdf},
-year = {2011}
-}
-@article{Richter2008,
-abstract = {The new research field of metagenomics is providing exciting insights into various, previously unclassified ecological systems. Next-generation sequencing technologies are producing a rapid increase of environmental data in public databases. There is great need for specialized software solutions and statistical methods for dealing with complex metagenome data sets.},
-author = {Richter, Daniel C and Ott, Felix and Auch, Alexander F and Schmid, Ramona and Huson, Daniel H},
-doi = {10.1371/journal.pone.0003373},
-editor = {Field, Dawn},
-file = {:home/gus/Documents/Mendeley Desktop/Richter et al.\_2008\_MetaSim a sequencing simulator for genomics and metagenomics.pdf:pdf},
-issn = {1932-6203},
-journal = {PloS one},
-keywords = {Databases,Genetic,Genomics,Models,Theoretical,User-Computer Interface},
-month = jan,
-number = {10},
-pages = {e3373},
-pmid = {18841204},
-publisher = {Public Library of Science},
-title = {{MetaSim: a sequencing simulator for genomics and metagenomics.}},
-url = {http://dx.plos.org/10.1371/journal.pone.0003373},
-volume = {3},
-year = {2008}
-}
-@article{Farach1997,
-author = {Farach, M.},
-file = {:home/gus/Documents/Mendeley Desktop/Farach\_1997\_Optimal suffix tree construction with large alphabets.pdf:pdf},
-isbn = {0-8186-8197-7},
-keywords = {combinatorial pattern matching,data structure,integer alphabet,integer alphabets,large alphabets,pattern matching,sorting,suffix tree},
-month = oct,
-pages = {137},
-title = {{Optimal suffix tree construction with large alphabets}},
-url = {http://dl.acm.org/citation.cfm?id=795663.796326},
-year = {1997}
-}
-@article{yang2010reptile,
-author = {Yang, X. and Dorman, K.S. and Aluru, S.},
-file = {:home/gus/Documents/Mendeley Desktop/Yang, Dorman, Aluru\_2010\_Reptile representative tiling for short read error correction.pdf:pdf},
-journal = {Bioinformatics},
-number = {20},
-pages = {2526},
-publisher = {Oxford Univ Press},
-title = {{Reptile: representative tiling for short read error correction}},
-url = {http://bioinformatics.oxfordjournals.org/content/26/20/2526.short},
-volume = {26},
-year = {2010}
-}
-@article{Chaisson2008,
-abstract = {In the last year, high-throughput sequencing technologies have progressed from proof-of-concept to production quality. While these methods produce high-quality reads, they have yet to produce reads comparable in length to Sanger-based sequencing. Current fragment assembly algorithms have been implemented and optimized for mate-paired Sanger-based reads, and thus do not perform well on short reads produced by short read technologies. We present a new Eulerian assembler that generates nearly optimal short read assemblies of bacterial genomes and describe an approach to assemble reads in the case of the popular hybrid protocol when short and long Sanger-based reads are combined.},
-author = {Chaisson, Mark J and Pevzner, Pavel A},
-doi = {10.1101/gr.7088808},
-file = {:home/gus/Documents/Mendeley Desktop/Chaisson, Pevzner\_2008\_Short read fragment assembly of bacterial genomes.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Bacterial,Bacterial: genetics,Contig Mapping,Contig Mapping: methods,DNA,DNA: methods,Genome,Genomics,Genomics: methods,Research Design,Sequence Analysis},
-month = feb,
-number = {2},
-pages = {324--30},
-pmid = {18083777},
-title = {{Short read fragment assembly of bacterial genomes.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2203630\&tool=pmcentrez\&rendertype=abstract},
-volume = {18},
-year = {2008}
-}
-@inproceedings{sundell2003fast,
-author = {Sundell, H. and Tsigas, P.},
-booktitle = {Parallel and Distributed Processing Symposium, 2003. Proceedings. International},
-file = {:home/gus/Documents/Mendeley Desktop/Sundell, Tsigas\_2003\_Fast and lock-free concurrent priority queues for multi-thread systems.pdf:pdf},
-pages = {11--pp},
-publisher = {IEEE},
-title = {{Fast and lock-free concurrent priority queues for multi-thread systems}},
-url = {http://ieeexplore.ieee.org/xpls/abs\_all.jsp?arnumber=1213189},
-year = {2003}
-}
-@article{Nakamura2011,
-abstract = {We identified the sequence-specific starting positions of consecutive miscalls in the mapping of reads obtained from the Illumina Genome Analyser (GA). Detailed analysis of the miscall pattern indicated that the underlying mechanism involves sequence-specific interference of the base elongation process during sequencing. The two major sequence patterns that trigger this sequence-specific error (SSE) are: (i) inverted repeats and (ii) GGC sequences. We speculate that these sequences favor dephasing by inhibiting single-base elongation, by: (i) folding single-stranded DNA and (ii) altering enzyme preference. This phenomenon is a major cause of sequence coverage variability and of the unfavorable bias observed for population-targeted methods such as RNA-seq and ChIP-seq. Moreover, SSE is a potential cause of false single-nucleotide polymorphism (SNP) calls and also significantly hinders de novo assembly. This article highlights the importance of recognizing SSE and its underlying mechanisms in the hope of enhancing the potential usefulness of the Illumina sequencers.},
-author = {Nakamura, Kensuke and Oshima, Taku and Morimoto, Takuya and Ikeda, Shun and Yoshikawa, Hirofumi and Shiwa, Yuh and Ishikawa, Shu and Linak, Margaret C and Hirai, Aki and Takahashi, Hiroki and Altaf-Ul-Amin, Md and Ogasawara, Naotake and Kanaya, Shigehiko},
-doi = {10.1093/nar/gkr344},
-file = {:home/gus/Documents/Mendeley Desktop/Nakamura et al.\_2011\_Sequence-specific error profile of Illumina sequencers.pdf:pdf},
-issn = {1362-4962},
-journal = {Nucleic acids research},
-month = may,
-number = {13},
-pages = {e90--},
-pmid = {21576222},
-title = {{Sequence-specific error profile of Illumina sequencers.}},
-url = {http://nar.oxfordjournals.org/cgi/content/abstract/39/13/e90},
-volume = {39},
-year = {2011}
-}
-@article{Yang2011,
-abstract = {High-throughput short read sequencing is revolutionizing genomics and systems biology research by enabling cost-effective deep coverage sequencing of genomes and transcriptomes. Error detection and correction are crucial to many short read sequencing applications including de novo genome sequencing, genome resequencing, and digital gene expression analysis. Short read error detection is typically carried out by counting the observed frequencies of kmers in reads and validating those with frequencies exceeding a threshold. In case of genomes with high repeat content, an erroneous kmer may be frequently observed if it has few nucleotide differences with valid kmers with multiple occurrences in the genome. Error detection and correction were mostly applied to genomes with low repeat content and this remains a challenging problem for genomes with high repeat content.},
-author = {Yang, Xiao and Aluru, Srinivas and Dorman, Karin S},
-doi = {10.1186/1471-2105-12-S1-S52},
-file = {:home/gus/Documents/Mendeley Desktop//Yang, Aluru, Dorman\_2011\_Repeat-aware modeling and correction of short read errors.pdf:pdf},
-issn = {1471-2105},
-journal = {BMC bioinformatics},
-keywords = {Algorithms,Computational Biology,Computational Biology: methods,Genomics,Genomics: methods,High-Throughput Nucleotide Sequencing,High-Throughput Nucleotide Sequencing: methods,Likelihood Functions,Models,Software,Statistical},
-month = jan,
-number = {Suppl 1},
-pages = {S52},
-pmid = {21342585},
-title = {{Repeat-aware modeling and correction of short read errors.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=3044310\&tool=pmcentrez\&rendertype=abstract http://www.biomedcentral.com/1471-2105/12/S1/S52},
-volume = {12 Suppl 1},
-year = {2011}
-}
-@article{Yang2011,
-abstract = {High-throughput short read sequencing is revolutionizing genomics and systems biology research by enabling cost-effective deep coverage sequencing of genomes and transcriptomes. Error detection and correction are crucial to many short read sequencing applications including de novo genome sequencing, genome resequencing, and digital gene expression analysis. Short read error detection is typically carried out by counting the observed frequencies of kmers in reads and validating those with frequencies exceeding a threshold. In case of genomes with high repeat content, an erroneous kmer may be frequently observed if it has few nucleotide differences with valid kmers with multiple occurrences in the genome. Error detection and correction were mostly applied to genomes with low repeat content and this remains a challenging problem for genomes with high repeat content.},
-author = {Yang, Xiao and Aluru, Srinivas and Dorman, Karin S},
-doi = {10.1186/1471-2105-12-S1-S52},
-file = {:home/gus/Documents/Mendeley Desktop//Yang, Aluru, Dorman\_2011\_Repeat-aware modeling and correction of short read errors.pdf:pdf},
-issn = {1471-2105},
-journal = {BMC bioinformatics},
-keywords = {Algorithms,Computational Biology,Computational Biology: methods,Genomics,Genomics: methods,High-Throughput Nucleotide Sequencing,High-Throughput Nucleotide Sequencing: methods,Likelihood Functions,Models,Software,Statistical},
-month = jan,
-number = {Suppl 1},
-pages = {S52},
-pmid = {21342585},
-title = {{Repeat-aware modeling and correction of short read errors.}},
-url = {http://www.biomedcentral.com/1471-2105/12/S1/S52},
-volume = {12 Suppl 1},
-year = {2011}
-}
-@article{Ferragina2000,
-author = {Ferragina, P. and Manzini, G.},
-file = {:home/gus/Documents/Mendeley Desktop/Ferragina, Manzini\_2000\_Opportunistic data structures with applications.pdf:pdf},
-isbn = {0-7695-0850-2},
-keywords = {Glimpse tool,computational complexity,data compression,data indexing,data set,data structures,database indexing,database theory,entropy,opportunistic data structures,query performance,search,sublinear query time complexity,sublinear space complexity,succinct suffix array,suffix array data structures,suffix tree data structures},
-month = nov,
-pages = {390},
-title = {{Opportunistic data structures with applications}},
-url = {http://dl.acm.org/citation.cfm?id=795666.796543 http://www.di.unipi.it/~ferragin/Libraries/fmindexV2/index.html},
-year = {2000}
-}
-@article{Langmead2009,
-abstract = {Bowtie is an ultrafast, memory-efficient alignment program for aligning short DNA sequence reads to large genomes. For the human genome, Burrows-Wheeler indexing allows Bowtie to align more than 25 million reads per CPU hour with a memory footprint of approximately 1.3 gigabytes. Bowtie extends previous Burrows-Wheeler techniques with a novel quality-aware backtracking algorithm that permits mismatches. Multiple processor cores can be used simultaneously to achieve even greater alignment speeds. Bowtie is open source (http://bowtie.cbcb.umd.edu).},
-author = {Langmead, Ben and Trapnell, Cole and Pop, Mihai and Salzberg, Steven L},
-doi = {10.1186/gb-2009-10-3-r25},
-file = {:home/gus/Documents/Mendeley Desktop/Langmead et al.\_2009\_Ultrafast and memory-efficient alignment of short DNA sequences to the human genome.pdf:pdf},
-issn = {1465-6914},
-journal = {Genome biology},
-keywords = {Algorithms,Base Sequence,Genome,Human,Human: genetics,Humans,Sequence Alignment,Sequence Alignment: methods},
-month = jan,
-number = {3},
-pages = {R25},
-pmid = {19261174},
-title = {{Ultrafast and memory-efficient alignment of short DNA sequences to the human genome.}},
-url = {http://genomebiology.com/2009/10/3/R25},
-volume = {10},
-year = {2009}
-}
-@article{Venter2001,
-author = {Venter, JC and Adams, MD and Myers, EW},
-file = {:home/gus/Documents/Mendeley Desktop/Venter, Adams, Myers\_2001\_The sequence of the human genome.pdf:pdf},
-journal = {Science's \ldots},
-title = {{The sequence of the human genome}},
-url = {http://stke.sciencemag.org/cgi/content/abstract/sci;291/5507/1304},
-year = {2001}
-}
-@article{Butler:2008kx,
-abstract = {New DNA sequencing technologies deliver data at dramatically lower costs but demand new analytical methods to take full advantage of the very short reads that they produce. We provide an initial, theoretical solution to the challenge of de novo assembly from whole-genome shotgun "microreads." For 11 genomes of sizes up to 39 Mb, we generated high-quality assemblies from 80x coverage by paired 30-base simulated reads modeled after real Illumina-Solexa reads. The bacterial genomes of Campylobacter jejuni and Escherichia coli assemble optimally, yielding single perfect contigs, and larger genomes yield assemblies that are highly connected and accurate. Assemblies are presented in a graph form that retains intrinsic ambiguities such as those arising from polymorphism, thereby providing information that has been absent from previous genome assemblies. For both C. jejuni and E. coli, this assembly graph is a single edge encompassing the entire genome. Larger genomes produce more complicated graphs, but the vast majority of the bases in their assemblies are present in long edges that are nearly always perfect. We describe a general method for genome assembly that can be applied to all types of DNA sequence data, not only short read data, but also conventional sequence reads.},
-author = {Butler, Jonathan and MacCallum, Iain and Kleber, Michael and Shlyakhter, Ilya a and Belmonte, Matthew K and Lander, Eric S and Nusbaum, Chad and Jaffe, David B},
-doi = {10.1101/gr.7337908},
-file = {:home/gus/Documents/Mendeley Desktop/Butler et al.\_2008\_ALLPATHS de novo assembly of whole-genome shotgun microreads.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Bacterial,Bacterial: genetics,Campylobacter jejuni,Campylobacter jejuni: genetics,Computational Biology,Computational Biology: methods,Computer Simulation,DNA,DNA: methods,DNA: standards,Escherichia coli,Escherichia coli: genetics,Genome,Reproducibility of Results,Sequence Analysis},
-month = may,
-number = {5},
-pages = {810--20},
-pmid = {18340039},
-title = {{ALLPATHS: de novo assembly of whole-genome shotgun microreads.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2336810\&tool=pmcentrez\&rendertype=abstract},
-volume = {18},
-year = {2008}
-}
-@article{medvedev2007computability,
-author = {Medvedev, P. and Georgiou, K. and Myers, G. and Brudno, M.},
-file = {:home/gus/Documents/Mendeley Desktop/Medvedev et al.\_2007\_Computability of models for sequence assembly.pdf:pdf},
-journal = {Algorithms in Bioinformatics},
-pages = {289--301},
-publisher = {Springer},
-title = {{Computability of models for sequence assembly}},
-url = {http://www.springerlink.com/index/H711368771048H21.pdf},
-year = {2007}
-}
-@article{Manber1990,
-annote = {        From Duplicate 1 (                           Suffix arrays: a new method for on-line string searches                         - Manber, Udi; Myers, Gene )
-                
-        
-        
-      },
-author = {Manber, Udi and Myers, Gene},
-file = {:home/gus/Documents/Mendeley Desktop/Manber, Myers\_1990\_Suffix arrays a new method for on-line string searches(2).pdf:pdf;:home/gus/Documents/Mendeley Desktop/Manber, Myers\_1990\_Suffix arrays a new method for on-line string searches.pdf:pdf},
-isbn = {0-89871-251-3},
-journal = {Proceedings of the first annual ACM-SIAM \ldots},
-month = jan,
-pages = {319--327},
-title = {{Suffix arrays: a new method for on-line string searches}},
-url = {http://portal.acm.org/citation.cfm?id=320218 http://dl.acm.org/citation.cfm?id=320176.320218},
-year = {1990}
-}
-@article{herlihy2002repeat,
-author = {Herlihy, M. and Luchangco, V. and Moir, M.},
-file = {:home/gus/Documents/Mendeley Desktop/Herlihy, Luchangco, Moir\_2002\_The repeat offender problem A mechanism for supporting dynamic-sized lock-free data structures.pdf:pdf},
-publisher = {Sun Microsystems, Inc.},
-title = {{The repeat offender problem: A mechanism for supporting dynamic-sized lock-free data structures}},
-url = {http://portal.acm.org/citation.cfm?id=1698158},
-year = {2002}
-}
-@article{Zerbino2009a,
-abstract = {Despite the short length of their reads, micro-read sequencing technologies have shown their usefulness for de novo sequencing. However, especially in eukaryotic genomes, complex repeat patterns are an obstacle to large assemblies.},
-author = {Zerbino, Daniel R DR and McEwen, GK Gayle K and Margulies, Elliott H and Birney, Ewan},
-doi = {10.1371/journal.pone.0008407},
-file = {:home/gus/Documents/Mendeley Desktop/Zerbino, McEwen\_2009\_Pebble and rock band heuristic resolution of repeats and scaffolding in the velvet short-read de novo assembler.pdf:pdf},
-issn = {1932-6203},
-journal = {PloS one},
-keywords = {Algorithms,Animals,Artificial,Bacterial,Bacterial: genetics,Chromosomes,Computer Simulation,DNA,DNA: instrumentation,DNA: methods,Ferrets,Ferrets: genetics,Nucleic Acid,Nucleic Acid: genetics,Pseudomonas syringae,Pseudomonas syringae: genetics,Repetitive Sequences,Sequence Analysis},
-month = jan,
-number = {12},
-pages = {e8407},
-pmid = {20027311},
-title = {{Pebble and rock band: heuristic resolution of repeats and scaffolding in the velvet short-read de novo assembler}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2793427\&tool=pmcentrez\&rendertype=abstract http://dx.plos.org/10.1371/journal.pone.0008407},
-volume = {4},
-year = {2009}
-}
-@article{Simpson2009,
-abstract = {Widespread adoption of massively parallel deoxyribonucleic acid (DNA) sequencing instruments has prompted the recent development of de novo short read assembly algorithms. A common shortcoming of the available tools is their inability to efficiently assemble vast amounts of data generated from large-scale sequencing projects, such as the sequencing of individual human genomes to catalog natural genetic variation. To address this limitation, we developed ABySS (Assembly By Short Sequences), a parallelized sequence assembler. As a demonstration of the capability of our software, we assembled 3.5 billion paired-end reads from the genome of an African male publicly released by Illumina, Inc. Approximately 2.76 million contigs > or =100 base pairs (bp) in length were created with an N50 size of 1499 bp, representing 68\% of the reference human genome. Analysis of these contigs identified polymorphic and novel sequences not present in the human reference assembly, which were validated by alignment to alternate human assemblies and to other primate genomes.},
-author = {Simpson, Jared T and Wong, Kim and Jackman, Shaun D and Schein, Jacqueline E and Jones, Steven J M and Birol, Inan\c{c}},
-doi = {10.1101/gr.089532.108},
-file = {:home/gus/Documents/Mendeley Desktop/Simpson et al.\_2009\_ABySS a parallel assembler for short read sequence data.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Animals,Computational Biology,Computational Biology: methods,Contig Mapping,Escherichia coli K12,Escherichia coli K12: genetics,Genetic Variation,Genome, Human,Humans,Polymorphism, Genetic,Reproducibility of Results,Sequence Analysis, DNA,Sequence Analysis, DNA: methods,Software},
-month = jun,
-number = {6},
-pages = {1117--23},
-pmid = {19251739},
-title = {{ABySS: a parallel assembler for short read sequence data.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2694472\&tool=pmcentrez\&rendertype=abstract},
-volume = {19},
-year = {2009}
-}
-@article{Maccallum:2009vn,
-abstract = {We demonstrate that genome sequences approaching finished quality can be generated from short paired reads. Using 36 base (fragment) and 26 base (jumping) reads from five microbial genomes of varied GC composition and sizes up to 40 Mb, ALLPATHS2 generated assemblies with long, accurate contigs and scaffolds. Velvet and EULER-SR were less accurate. For example, for Escherichia coli, the fraction of 10-kb stretches that were perfect was 99.8\% (ALLPATHS2), 68.7\% (Velvet), and 42.1\% (EULER-SR).},
-author = {Maccallum, Iain and Przybylski, Dariusz and Gnerre, Sante and Burton, Joshua and Shlyakhter, Ilya and Gnirke, Andreas and Malek, Joel and McKernan, Kevin and Ranade, Swati and Shea, Terrance P and Williams, Louise and Young, Sarah and Nusbaum, Chad and Jaffe, David B},
-doi = {10.1186/gb-2009-10-10-r103},
-file = {:home/gus/Documents/Mendeley Desktop//Maccallum et al.\_2009\_ALLPATHS 2 small genomes assembled accurately and with high continuity from short paired reads.pdf:pdf},
-issn = {1465-6914},
-journal = {Genome biology},
-keywords = {Bacteria,Bacteria: genetics,Base Pairing,Base Pairing: genetics,Fungi,Fungi: genetics,Genome,Genome: genetics,Genomics,Genomics: methods,Reproducibility of Results,Software},
-month = jan,
-number = {10},
-pages = {R103},
-pmid = {19796385},
-title = {{ALLPATHS 2: small genomes assembled accurately and with high continuity from short paired reads.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2784318\&tool=pmcentrez\&rendertype=abstract},
-volume = {10},
-year = {2009}
-}
-@article{Chor2009,
-abstract = {The empirical frequencies of DNA k-mers in whole genome sequences provide an interesting perspective on genomic complexity, and the availability of large segments of genomic sequence from many organisms means that analysis of k-mers with non-trivial lengths is now possible.},
-author = {Chor, Benny and Horn, David and Goldman, Nick and Levy, Yaron and Massingham, Tim},
-doi = {10.1186/gb-2009-10-10-r108},
-file = {:home/gus/Documents/Mendeley Desktop/Chor et al.\_2009\_Genomic DNA k-mer spectra models and modalities.pdf:pdf},
-issn = {1465-6914},
-journal = {Genome biology},
-keywords = {Animals,Base Composition,Base Composition: genetics,Chickens,Chickens: genetics,Computer Simulation,CpG Islands,CpG Islands: genetics,DNA,DNA: genetics,Genome,Genome: genetics,Humans,Markov Chains,Models, Genetic,Zebrafish,Zebrafish: genetics},
-month = jan,
-number = {10},
-pages = {R108},
-pmid = {19814784},
-title = {{Genomic DNA k-mer spectra: models and modalities.}},
-url = {http://genomebiology.com/2009/10/10/R108},
-volume = {10},
-year = {2009}
-}
-@techreport{Drepper2007,
-author = {Drepper, Ulrich},
-file = {:home/gus/Documents/Mendeley Desktop/Drepper\_2007\_What Every Programmer Should Know About Memory.pdf:pdf},
-keywords = {Cache,Memory,lock free},
-title = {{What Every Programmer Should Know About Memory}},
-year = {2007}
-}
-@article{Lander1988,
-abstract = {Results from physical mapping projects have recently been reported for the genomes of Escherichia coli, Saccharomyces cerevisiae, and Caenorhabditis elegans, and similar projects are currently being planned for other organisms. In such projects, the physical map is assembled by first "fingerprinting" a large number of clones chosen at random from a recombinant library and then inferring overlaps between clones with sufficiently similar fingerprints. Although the basic approach is the same, there are many possible choices for the fingerprint used to characterize the clones and the rules for declaring overlap. In this paper, we derive simple formulas showing how the progress of a physical mapping project is affected by the nature of the fingerprinting scheme. Using these formulas, we discuss the analytic considerations involved in selecting an appropriate fingerprinting scheme for a particular project.},
-author = {Lander, E S and Waterman, M S},
-file = {:home/gus/Documents/Mendeley Desktop/Lander, Waterman\_1988\_Genomic mapping by fingerprinting random clones a mathematical analysis.pdf:pdf},
-issn = {0888-7543},
-journal = {Genomics},
-keywords = {Animals,Caenorhabditis,Caenorhabditis: genetics,Chromosome Mapping,Cloning,Escherichia coli,Escherichia coli: genetics,Mathematics,Molecular,Nucleotide Mapping,Saccharomyces cerevisiae,Saccharomyces cerevisiae: genetics},
-month = apr,
-number = {3},
-pages = {231--9},
-pmid = {3294162},
-title = {{Genomic mapping by fingerprinting random clones: a mathematical analysis.}},
-url = {http://www.ncbi.nlm.nih.gov/pubmed/3294162},
-volume = {2},
-year = {1988}
-}
-@article{Purcell2005,
-abstract = {We present the first non-blocking hashtable based on open addressing that provides the following benefits: it combines good cache locality, accessing a single cacheline if there are no collisions, with short straight-line code; it needs no storage overhead for pointers and memory allocator schemes, having instead an overhead of two words per bucket; it does not need to periodically reorganise or replicate the table; and it does not need garbage collection, even with arbitrary-sized keys. Open problems include resizing the table and replacing, rather than erasing, entries. The result is a highly-concurrent set algorithm that approaches or outperforms the best externally- chained implementations we tested, with fixed memory costs and no need to select or fine-tune a garbage collector or locking strategy.},
-author = {Purcell, Chris and Harris, Tim},
-file = {:home/gus/Documents/Mendeley Desktop/Purcell, Harris\_2005\_Non-blocking hatables with open addressing.pdf:pdf},
-journal = {University of Cambridge Technical Report},
-keywords = {hash table,lock free},
-number = {639},
-title = {{Non-blocking hatables with open addressing}},
-year = {2005}
-}
-@article{Zerbino2008,
-abstract = {We have developed a new set of algorithms, collectively called "Velvet," to manipulate de Bruijn graphs for genomic sequence assembly. A de Bruijn graph is a compact representation based on short words (k-mers) that is ideal for high coverage, very short read (25-50 bp) data sets. Applying Velvet to very short reads and paired-ends information only, one can produce contigs of significant length, up to 50-kb N50 length in simulations of prokaryotic data and 3-kb N50 on simulated mammalian BACs. When applied to real Solexa data sets without read pairs, Velvet generated contigs of approximately 8 kb in a prokaryote and 2 kb in a mammalian BAC, in close agreement with our simulated results without read-pair information. Velvet represents a new approach to assembly that can leverage very short reads in combination with read pairs to produce useful assemblies.},
-author = {Zerbino, Daniel R and Birney, Ewan},
-doi = {10.1101/gr.074492.107},
-file = {:home/gus/Documents/Mendeley Desktop/Zerbino, Birney\_2008\_Velvet algorithms for de novo short read assembly using de Bruijn graphs.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Animals,Artificial,Bacterial,Chromosomes,Computational Biology,Computational Biology: methods,Computer Simulation,DNA,DNA: methods,DNA: standards,Genome,Genomics,Human,Humans,Mammals,Mammals: genetics,Sequence Analysis,Streptococcus,Streptococcus: genetics},
-month = may,
-number = {5},
-pages = {821--9},
-pmid = {18349386},
-title = {{Velvet: algorithms for de novo short read assembly using de Bruijn graphs}},
-url = {http://genome.cshlp.org/content/18/5/821.short http://genome.cshlp.org/cgi/content/abstract/18/5/821},
-volume = {18},
-year = {2008}
-}
-@article{Maccallum:2009vn,
-abstract = {We demonstrate that genome sequences approaching finished quality can be generated from short paired reads. Using 36 base (fragment) and 26 base (jumping) reads from five microbial genomes of varied GC composition and sizes up to 40 Mb, ALLPATHS2 generated assemblies with long, accurate contigs and scaffolds. Velvet and EULER-SR were less accurate. For example, for Escherichia coli, the fraction of 10-kb stretches that were perfect was 99.8\% (ALLPATHS2), 68.7\% (Velvet), and 42.1\% (EULER-SR).},
-author = {Maccallum, Iain and Przybylski, Dariusz and Gnerre, Sante and Burton, Joshua and Shlyakhter, Ilya and Gnirke, Andreas and Malek, Joel and McKernan, Kevin and Ranade, Swati and Shea, Terrance P and Williams, Louise and Young, Sarah and Nusbaum, Chad and Jaffe, David B},
-doi = {10.1186/gb-2009-10-10-r103},
-file = {:home/gus/Documents/Mendeley Desktop//Maccallum et al.\_2009\_ALLPATHS 2 small genomes assembled accurately and with high continuity from short paired reads.pdf:pdf},
-issn = {1465-6914},
-journal = {Genome biology},
-keywords = {Bacteria,Bacteria: genetics,Base Pairing,Base Pairing: genetics,Fungi,Fungi: genetics,Genome,Genome: genetics,Genomics,Genomics: methods,Reproducibility of Results,Software},
-month = jan,
-number = {10},
-pages = {R103},
-pmid = {19796385},
-title = {{ALLPATHS 2: small genomes assembled accurately and with high continuity from short paired reads.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2784318\&tool=pmcentrez\&rendertype=abstract},
-volume = {10},
-year = {2009}
-}
-@article{Melsted2011,
-abstract = {BACKGROUND:Counting k-mers (substrings of length k in DNA sequence data) is an essential component of many methods in bioinformatics, including for genome and transcriptome assembly, for metagenomic sequencing, and for error correction of sequence reads. Although simple in principle, counting k-mers in large modern sequence data sets can easily overwhelm the memory capacity of standard computers. In current data sets, a large fraction - often more than 50\% - of the storage capacity may be spent on storing k-mers that contain sequencing errors and which are typically observed only a single time in the data. These singleton k-mers are uninformative for many algorithms without some kind of error correction.RESULTS:We present a new method that identifies all the k-mers that occur more than once in a DNA sequence data set. Our method does this using a Bloom filter, a probabilistic data structure that stores all the observed k-mers implicitly in memory with greatly reduced memory requirements. We then make a second sweep through the data to provide exact counts of all nonunique k-mers. For example data sets, we report up to 50\% savings in memory usage compared to current software, with modest costs in computational speed. This approach may reduce memory requirements for any algorithm that starts by counting k-mers in sequence data with errors.CONCLUSIONS:A reference implementation for this methodology, BFCounter, is written in C++ and is GPL licensed. It is available for free download at http://pritch.bsd.uchicago.edu/software.html},
-author = {Melsted, Pall and Pritchard, Jonathan K},
-doi = {10.1186/1471-2105-12-333},
-file = {:home/gus/Documents/Mendeley Desktop/Melsted, Pritchard\_2011\_Efficient counting of k-mers in DNA sequences using a Bloom Filter.pdf:pdf},
-issn = {1471-2105},
-journal = {BMC Bioinformatics},
-number = {1},
-pages = {333},
-title = {{Efficient counting of k-mers in DNA sequences using a Bloom Filter}},
-url = {http://www.biomedcentral.com/1471-2105/12/333},
-volume = {12},
-year = {2011}
-}
-@article{Chaisson2008,
-abstract = {In the last year, high-throughput sequencing technologies have progressed from proof-of-concept to production quality. While these methods produce high-quality reads, they have yet to produce reads comparable in length to Sanger-based sequencing. Current fragment assembly algorithms have been implemented and optimized for mate-paired Sanger-based reads, and thus do not perform well on short reads produced by short read technologies. We present a new Eulerian assembler that generates nearly optimal short read assemblies of bacterial genomes and describe an approach to assemble reads in the case of the popular hybrid protocol when short and long Sanger-based reads are combined.},
-author = {Chaisson, Mark J and Pevzner, Pavel A},
-doi = {10.1101/gr.7088808},
-file = {:home/gus/Documents/Mendeley Desktop/Chaisson, Pevzner\_2008\_Short read fragment assembly of bacterial genomes.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Bacterial,Bacterial: genetics,Contig Mapping,Contig Mapping: methods,DNA,DNA: methods,Genome,Genomics,Genomics: methods,Research Design,Sequence Analysis},
-month = feb,
-number = {2},
-pages = {324--30},
-pmid = {18083777},
-title = {{Short read fragment assembly of bacterial genomes.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2203630\&tool=pmcentrez\&rendertype=abstract},
-volume = {18},
-year = {2008}
-}
-@article{Li01022010,
-abstract = {Next-generation massively parallel DNA sequencing technologies provide ultrahigh throughput at a substantially lower unit data cost; however, the data are very short read length sequences, making de novo assembly extremely challenging. Here, we describe a novel method for de novo assembly of large genomes from short read sequences. We successfully assembled both the Asian and African human genome sequences, achieving an N50 contig size of 7.4 and 5.9 kilobases (kb) and scaffold of 446.3 and 61.9 kb, respectively. The development of this de novo short read assembly method creates new opportunities for building reference sequences and carrying out accurate analyses of unexplored genomes in a cost-effective way.},
-author = {Li, Ruiqiang and Zhu, Hongmei and Ruan, Jue and Qian, Wubin and Fang, Xiaodong and Shi, Zhongbin and Li, Yingrui and Li, Shengting and Shan, Gao and Kristiansen, Karsten and Li, Songgang and Yang, Huanming and Wang, Jian and Wang, Jun},
-doi = {10.1101/gr.097261.109},
-file = {:home/gus/Documents/Mendeley Desktop/Li et al.\_2010\_De novo assembly of human genomes with massively parallel short read sequencing.pdf:pdf},
-journal = {Genome Research},
-number = {2},
-pages = {265--272},
-title = {{De novo assembly of human genomes with massively parallel short read sequencing}},
-url = {http://genome.cshlp.org/content/20/2/265.abstract},
-volume = {20},
-year = {2010}
-}
-@article{Schatz:2010uq,
-abstract = {Second-generation sequencing technology can now be used to sequence an entire human genome in a matter of days and at low cost. Sequence read lengths, initially very short, have rapidly increased since the technology first appeared, and we now are seeing a growing number of efforts to sequence large genomes de novo from these short reads. In this Perspective, we describe the issues associated with short-read assembly, the different types of data produced by second-gen sequencers, and the latest assembly algorithms designed for these data. We also review the genomes that have been assembled recently from short reads and make recommendations for sequencing strategies that will yield a high-quality assembly.},
-author = {Schatz, Michael C and Delcher, Arthur L and Salzberg, Steven L},
-doi = {10.1101/gr.101360.109},
-file = {:home/gus/Documents/Mendeley Desktop/Schatz, Delcher, Salzberg\_2010\_Assembly of large genomes using second-generation sequencing.pdf:pdf},
-issn = {1549-5469},
-journal = {Genome research},
-keywords = {Algorithms,Base Sequence,DNA,DNA: methods,Genome,Genomics,Genomics: methods,Human,Humans,Sequence Analysis},
-month = sep,
-number = {9},
-pages = {1165--73},
-pmid = {20508146},
-title = {{Assembly of large genomes using second-generation sequencing.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2928494\&tool=pmcentrez\&rendertype=abstract},
-volume = {20},
-year = {2010}
-}
-@article{Maccallum:2009vn,
-abstract = {We demonstrate that genome sequences approaching finished quality can be generated from short paired reads. Using 36 base (fragment) and 26 base (jumping) reads from five microbial genomes of varied GC composition and sizes up to 40 Mb, ALLPATHS2 generated assemblies with long, accurate contigs and scaffolds. Velvet and EULER-SR were less accurate. For example, for Escherichia coli, the fraction of 10-kb stretches that were perfect was 99.8\% (ALLPATHS2), 68.7\% (Velvet), and 42.1\% (EULER-SR).},
-author = {Maccallum, Iain and Przybylski, Dariusz and Gnerre, Sante and Burton, Joshua and Shlyakhter, Ilya and Gnirke, Andreas and Malek, Joel and McKernan, Kevin and Ranade, Swati and Shea, Terrance P and Williams, Louise and Young, Sarah and Nusbaum, Chad and Jaffe, David B},
-doi = {10.1186/gb-2009-10-10-r103},
-file = {:home/gus/Documents/Mendeley Desktop//Maccallum et al.\_2009\_ALLPATHS 2 small genomes assembled accurately and with high continuity from short paired reads.pdf:pdf},
-issn = {1465-6914},
-journal = {Genome biology},
-keywords = {Bacteria,Bacteria: genetics,Base Pairing,Base Pairing: genetics,Fungi,Fungi: genetics,Genome,Genome: genetics,Genomics,Genomics: methods,Reproducibility of Results,Software},
-month = jan,
-number = {10},
-pages = {R103},
-pmid = {19796385},
-title = {{ALLPATHS 2: small genomes assembled accurately and with high continuity from short paired reads.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2784318\&tool=pmcentrez\&rendertype=abstract},
-volume = {10},
-year = {2009}
-}
-@article{Venter2001,
-author = {Venter, JC and Adams, MD and Myers, EW},
-file = {:home/gus/Documents/Mendeley Desktop/Venter, Adams, Myers\_2001\_The sequence of the human genome.pdf:pdf},
-journal = {Science's \ldots},
-title = {{The sequence of the human genome}},
-url = {http://stke.sciencemag.org/cgi/content/abstract/sci;291/5507/1304},
-year = {2001}
-}
-@article{Li2009,
-abstract = {The enormous amount of short reads generated by the new DNA sequencing technologies call for the development of fast and accurate read alignment programs. A first generation of hash table-based methods has been developed, including MAQ, which is accurate, feature rich and fast enough to align short reads from a single individual. However, MAQ does not support gapped alignment for single-end reads, which makes it unsuitable for alignment of longer reads where indels may occur frequently. The speed of MAQ is also a concern when the alignment is scaled up to the resequencing of hundreds of individuals.},
-author = {Li, Heng and Durbin, Richard},
-doi = {10.1093/bioinformatics/btp324},
-file = {:home/gus/Documents/Mendeley Desktop/Li, Durbin\_2009\_Fast and accurate short read alignment with Burrows-Wheeler transform.pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-keywords = {Algorithms,Genomics,Genomics: methods,Sequence Alignment,Sequence Alignment: methods,Sequence Analysis, DNA,Sequence Analysis, DNA: methods,Software},
-month = jul,
-number = {14},
-pages = {1754--60},
-pmid = {19451168},
-title = {{Fast and accurate short read alignment with Burrows-Wheeler transform.}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/25/14/1754},
-volume = {25},
-year = {2009}
-}
-@article{Li2011,
-author = {Li, Yingrui and Zheng, Hancheng and Luo, Ruibang and Wu, Honglong and Zhu, Hongmei and Li, Ruiqiang and Cao, Hongzhi and Wu, Boxin and Huang, Shujia and Shao, Haojing and Ma, Hanzhou and Zhang, Fan and Feng, Shuijian and Zhang, Wei and Du, Hongli and Tian, Geng and Li, Jingxiang and Zhang, Xiuqing and Li, Songgang and Bolund, Lars and Kristiansen, Karsten and de Smith, Adam J and Blakemore, Alexandra I F and Coin, Lachlan J M and Yang, Huanming and Wang, Jian and Wang, Jun},
-doi = {10.1038/nbt.1904},
-file = {:home/gus/Documents/Mendeley Desktop/Li et al.\_2011\_Structural variation in two human genomes mapped at single-nucleotide resolution by whole genome de novo assembly.pdf:pdf},
-issn = {1087-0156},
-journal = {Nature Biotechnology},
-month = jul,
-number = {8},
-pages = {723--730},
-publisher = {Nature Publishing Group, a division of Macmillan Publishers Limited. All Rights Reserved.},
-shorttitle = {Nat Biotech},
-title = {{Structural variation in two human genomes mapped at single-nucleotide resolution by whole genome de novo assembly}},
-url = {http://dx.doi.org/10.1038/nbt.1904},
-volume = {29},
-year = {2011}
-}
-@article{Kawrykow2012,
-abstract = {Background
-          Comparative genomics, or the study of the relationships of genome structure and function across different species, offers a powerful tool for studying evolution, annotating genomes, and understanding the causes of various genetic disorders. However, aligning multiple sequences of DNA, an essential intermediate step for most types of analyses, is a difficult computational task. In parallel, citizen science, an approach that takes advantage of the fact that the human brain is exquisitely tuned to solving specific types of problems, is becoming increasingly popular. There, instances of hard computational problems are dispatched to a crowd of non-expert human game players and solutions are sent back to a central server.
-        
-        
-          Methodology/Principal Findings
-          We introduce Phylo, a human-based computing framework applying “crowd sourcing” techniques to solve the Multiple Sequence Alignment (MSA) problem. The key idea of Phylo is to convert the MSA problem into a casual game that can be played by ordinary web users with a minimal prior knowledge of the biological context. We applied this strategy to improve the alignment of the promoters of disease-related genes from up to 44 vertebrate species. Since the launch in November 2010, we received more than 350,000 solutions submitted from more than 12,000 registered users. Our results show that solutions submitted contributed to improving the accuracy of up to 70\% of the alignment blocks considered.
-        
-        
-          Conclusions/Significance
-          We demonstrate that, combined with classical algorithms, crowd computing techniques can be successfully used to help improving the accuracy of MSA. More importantly, we show that an NP-hard computational problem can be embedded in casual game that can be easily played by people without significant scientific training. This suggests that citizen science approaches can be used to exploit the billions of “human-brain peta-flops” of computation that are spent every day playing games. Phylo is available at: http://phylo.cs.mcgill.ca.},
-author = {Kawrykow, Alexander and Roumanis, Gary and Kam, Alfred and Kwak, Daniel and Leung, Clarence and Wu, Chu and Zarour, Eleyine and Sarmenta, Luis and Blanchette, Mathieu and Waldisp\"{u}hl, J\'{e}r\^{o}me},
-doi = {10.1371/journal.pone.0031362},
-editor = {Michalak, Pawel},
-file = {:home/gus/Documents/Mendeley Desktop/Kawrykow et al.\_2012\_Phylo A Citizen Science Approach for Improving Multiple Sequence Alignment.pdf:pdf},
-issn = {1932-6203},
-journal = {PLoS ONE},
-keywords = {Biology,Computational Biology,Computer Science,Computer applications,Computing methods,Evolutionary Biology,Genetics,Genetics and Genomics,Genomics,Organismal evolution,Research Article},
-month = mar,
-number = {3},
-pages = {e31362},
-publisher = {Public Library of Science},
-title = {{Phylo: A Citizen Science Approach for Improving Multiple Sequence Alignment}},
-url = {http://dx.plos.org/10.1371/journal.pone.0031362},
-volume = {7},
-year = {2012}
-}
-@article{Kurtz2008,
-abstract = {The challenges of accurate gene prediction and enumeration are further aggravated in large genomes that contain highly repetitive transposable elements (TEs). Yet TEs play a substantial role in genome evolution and are themselves an important subject of study. Repeat annotation, based on counting occurrences of k-mers, has been previously used to distinguish TEs from low-copy genic regions; but currently available software solutions are impractical due to high memory requirements or specialization for specific user-tasks.},
-author = {Kurtz, Stefan and Narechania, Apurva and Stein, Joshua C and Ware, Doreen},
-doi = {10.1186/1471-2164-9-517},
-file = {:home/gus/Documents/Mendeley Desktop/Kurtz et al.\_2008\_A new method to compute K-mer frequencies and its application to annotate large repetitive plant genomes.pdf:pdf},
-issn = {1471-2164},
-journal = {BMC genomics},
-keywords = {Computational Biology,Computational Biology: methods,DNA Transposable Elements,Genome, Plant,Genomics,Genomics: methods,Methods,Oryza sativa,Software,Sorghum,Zea mays},
-month = jan,
-pages = {517},
-pmid = {18976482},
-title = {{A new method to compute K-mer frequencies and its application to annotate large repetitive plant genomes.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2613927\&tool=pmcentrez\&rendertype=abstract},
-volume = {9},
-year = {2008}
-}
-@inproceedings{Gao2004,
-author = {Gao, H. and Groote, J.F. F and Hesselink, W.H. H},
-booktitle = {18th International Parallel and Distributed Processing Symposium},
-doi = {10.1109/IPDPS.2004.1302969},
-file = {:home/gus/Documents/Mendeley Desktop/Gao, Groote, Hesselink\_Unknown\_Almost wait-free resizable hashtables.pdf:pdf},
-isbn = {0769521320},
-number = {C},
-pages = {50--58},
-publisher = {Ieee},
-title = {{Almost wait-free resizable hashtables}},
-url = {http://ieeexplore.ieee.org/lpdocs/epic03/wrapper.htm?arnumber=1302969},
-volume = {00},
-year = {2004}
-}
-@article{Chaisson2008,
-abstract = {In the last year, high-throughput sequencing technologies have progressed from proof-of-concept to production quality. While these methods produce high-quality reads, they have yet to produce reads comparable in length to Sanger-based sequencing. Current fragment assembly algorithms have been implemented and optimized for mate-paired Sanger-based reads, and thus do not perform well on short reads produced by short read technologies. We present a new Eulerian assembler that generates nearly optimal short read assemblies of bacterial genomes and describe an approach to assemble reads in the case of the popular hybrid protocol when short and long Sanger-based reads are combined.},
-author = {Chaisson, Mark J and Pevzner, Pavel A},
-doi = {10.1101/gr.7088808},
-file = {:home/gus/Documents/Mendeley Desktop/Chaisson, Pevzner\_2008\_Short read fragment assembly of bacterial genomes.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Bacterial,Bacterial: genetics,Contig Mapping,Contig Mapping: methods,DNA,DNA: methods,Genome,Genomics,Genomics: methods,Research Design,Sequence Analysis},
-month = feb,
-number = {2},
-pages = {324--30},
-pmid = {18083777},
-title = {{Short read fragment assembly of bacterial genomes.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2203630\&tool=pmcentrez\&rendertype=abstract},
-volume = {18},
-year = {2008}
-}
-@article{Ding2012,
-author = {Ding, Li and Ley, Timothy J. and Larson, David E. and Miller, Christopher A. and Koboldt, Daniel C. and Welch, John S. and Ritchey, Julie K. and Young, Margaret A. and Lamprecht, Tamara and McLellan, Michael D. and McMichael, Joshua F. and Wallis, John W. and Lu, Charles and Shen, Dong and Harris, Christopher C. and Dooling, David J. and Fulton, Robert S. and Fulton, Lucinda L. and Chen, Ken and Schmidt, Heather and Kalicki-Veizer, Joelle and Magrini, Vincent J. and Cook, Lisa and McGrath, Sean D. and Vickery, Tammi L. and Wendl, Michael C. and Heath, Sharon and Watson, Mark A. and Link, Daniel C. and Tomasson, Michael H. and Shannon, William D. and Payton, Jacqueline E. and Kulkarni, Shashikant and Westervelt, Peter and Walter, Matthew J. and Graubert, Timothy A. and Mardis, Elaine R. and Wilson, Richard K. and DiPersio, John F.},
-doi = {10.1038/nature10738},
-file = {:home/gus/Documents/Mendeley Desktop/Ding et al.\_2012\_Clonal evolution in relapsed acute myeloid leukaemia revealed by whole-genome sequencing.pdf:pdf},
-issn = {0028-0836},
-journal = {Nature},
-month = jan,
-number = {7382},
-pages = {506--510},
-publisher = {Nature Publishing Group, a division of Macmillan Publishers Limited. All Rights Reserved.},
-shorttitle = {Nature},
-title = {{Clonal evolution in relapsed acute myeloid leukaemia revealed by whole-genome sequencing}},
-url = {http://dx.doi.org/10.1038/nature10738},
-volume = {481},
-year = {2012}
-}
-@article{Jaffe2003,
-abstract = {We previously described the whole-genome assembly program Arachne, presenting assemblies of simulated data for small to mid-sized genomes. Here we describe algorithmic adaptations to the program, allowing for assembly of mammalian-size genomes, and also improving the assembly of smaller genomes. Three principal changes were simultaneously made and applied to the assembly of the mouse genome, during a six-month period of development: (1) Supercontigs (scaffolds) were iteratively broken and rejoined using several criteria, yielding a 64-fold increase in length (N50), and apparent elimination of all global misjoins; (2) gaps between contigs in supercontigs were filled (partially or completely) by insertion of reads, as suggested by pairing within the supercontig, increasing the N50 contig length by 50\%; (3) memory usage was reduced fourfold. The outcome of this mouse assembly and its analysis are described in (Mouse Genome Sequencing Consortium 2002).},
-author = {Jaffe, David B and Butler, Jonathan and Gnerre, Sante and Mauceli, Evan and Lindblad-Toh, Kerstin and Mesirov, Jill P and Zody, Michael C and Lander, Eric S},
-doi = {10.1101/gr.828403},
-file = {:home/gus/Documents/Mendeley Desktop/Jaffe et al.\_2003\_Whole-genome sequence assembly for mammalian genomes Arachne 2.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Animals,Computational Biology,Computational Biology: methods,Contig Mapping,Contig Mapping: methods,Genome,Humans,Mice,Software},
-month = jan,
-number = {1},
-pages = {91--6},
-pmid = {12529310},
-title = {{Whole-genome sequence assembly for mammalian genomes: Arachne 2.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=430950\&tool=pmcentrez\&rendertype=abstract},
-volume = {13},
-year = {2003}
-}
-@article{Simpson2010,
-abstract = {MOTIVATION: Sequence assembly is a difficult problem whose importance has grown again recently as the cost of sequencing has dramatically dropped. Most new sequence assembly software has started by building a de Bruijn graph, avoiding the overlap-based methods used previously because of the computational cost and complexity of these with very large numbers of short reads. Here, we show how to use suffix array-based methods that have formed the basis of recent very fast sequence mapping algorithms to find overlaps and generate assembly string graphs asymptotically faster than previously described algorithms. RESULTS: Standard overlap assembly methods have time complexity O(N(2)), where N is the sum of the lengths of the reads. We use the Ferragina-Manzini index (FM-index) derived from the Burrows-Wheeler transform to find overlaps of length at least tau among a set of reads. As well as an approach that finds all overlaps then implements transitive reduction to produce a string graph, we show how to output directly only the irreducible overlaps, significantly shrinking memory requirements and reducing compute time to O(N), independent of depth. Overlap-based assembly methods naturally handle mixed length read sets, including capillary reads or long reads promised by the third generation sequencing technologies. The algorithms we present here pave the way for overlap-based assembly approaches to be developed that scale to whole vertebrate genome de novo assembly.},
-author = {Simpson, Jared T and Durbin, Richard},
-doi = {10.1093/bioinformatics/btq217},
-file = {:home/gus/Documents/Mendeley Desktop/Simpson, Durbin\_2010\_Efficient construction of an assembly string graph using the FM-index.pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-keywords = {Algorithms,Genomics,Genomics: methods,Sequence Analysis, DNA,Sequence Analysis, DNA: methods,Software},
-month = jun,
-number = {12},
-pages = {i367--73},
-pmid = {20529929},
-title = {{Efficient construction of an assembly string graph using the FM-index.}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/26/12/i367},
-volume = {26},
-year = {2010}
-}
-@article{Ladan-Mozes2007,
-author = {Ladan-Mozes, Edya and Shavit, Nir},
-doi = {10.1007/s00446-007-0050-0},
-file = {:home/gus/Documents/Mendeley Desktop/Ladan-Mozes, Shavit\_2007\_An optimistic approach to lock-free FIFO queues.pdf:pdf},
-issn = {0178-2770},
-journal = {Distributed Computing},
-month = nov,
-number = {5},
-pages = {323--341},
-title = {{An optimistic approach to lock-free FIFO queues}},
-url = {http://www.springerlink.com/index/10.1007/s00446-007-0050-0},
-volume = {20},
-year = {2007}
-}
-@article{dalloul2010multi,
-author = {Dalloul, R.A. and Long, J.A. and Zimin, A.V. and Aslam, L. and Beal, K. and Bouffard, P. and Burt, D.W. and Crasta, O. and Crooijmans, R.P.M.A. and Cooper, K. and Others},
-file = {:home/gus/Documents/Mendeley Desktop/Dalloul et al.\_2010\_Multi-platform next-generation sequencing of the domestic turkey (Meleagris gallopavo) genome assembly and analysis.pdf:pdf},
-journal = {PLoS biology},
-number = {9},
-pages = {e1000475},
-title = {{Multi-platform next-generation sequencing of the domestic turkey (Meleagris gallopavo): genome assembly and analysis}},
-url = {http://dx.plos.org/10.1371/journal.pbio.1000475},
-volume = {8},
-year = {2010}
-}
-@article{Bloom1970,
-author = {Bloom, Burton H.},
-doi = {10.1145/362686.362692},
-file = {:home/gus/Documents/Mendeley Desktop/Bloom\_1970\_Spacetime trade-offs in hash coding with allowable errors.pdf:pdf},
-issn = {00010782},
-journal = {Communications of the ACM},
-keywords = {Bloom filter,hash addressing,hash coding,retrieval efficiency,retrieval trade-offs,scatter storage,searching,storage efficiency,storage layout},
-mendeley-tags = {Bloom filter},
-month = jul,
-number = {7},
-pages = {422--426},
-title = {{Space/time trade-offs in hash coding with allowable errors}},
-url = {http://dl.acm.org/citation.cfm?id=362686.362692},
-volume = {13},
-year = {1970}
-}
-@inproceedings{michael2002safe,
-author = {Michael, M.M.},
-booktitle = {Proceedings of the twenty-first annual symposium on Principles of distributed computing},
-file = {:home/gus/Documents/Mendeley Desktop/Michael\_2002\_Safe memory reclamation for dynamic lock-free objects using atomic reads and writes.pdf:pdf},
-pages = {21--30},
-publisher = {ACM},
-title = {{Safe memory reclamation for dynamic lock-free objects using atomic reads and writes}},
-url = {http://portal.acm.org/citation.cfm?id=571829},
-year = {2002}
-}
-@article{Miller1998,
-author = {Miller, Peter},
-file = {:home/gus/Documents/Mendeley Desktop/Miller\_1998\_Recursive make considered harmful.pdf:pdf},
-journal = {AUUGN Journal of AUUG Inc},
-number = {1},
-pages = {14--25},
-title = {{Recursive make considered harmful}},
-url = {http://www.unix-ag.uni-kl.de/svn/kbibtex/kbibtex/tags/release-0.1/admin/unsermake/doc/auug97.pdf},
-volume = {19},
-year = {1998}
-}
-@article{Chaisson2008,
-abstract = {In the last year, high-throughput sequencing technologies have progressed from proof-of-concept to production quality. While these methods produce high-quality reads, they have yet to produce reads comparable in length to Sanger-based sequencing. Current fragment assembly algorithms have been implemented and optimized for mate-paired Sanger-based reads, and thus do not perform well on short reads produced by short read technologies. We present a new Eulerian assembler that generates nearly optimal short read assemblies of bacterial genomes and describe an approach to assemble reads in the case of the popular hybrid protocol when short and long Sanger-based reads are combined.},
-author = {Chaisson, Mark J and Pevzner, Pavel A},
-doi = {10.1101/gr.7088808},
-file = {:home/gus/Documents/Mendeley Desktop/Chaisson, Pevzner\_2008\_Short read fragment assembly of bacterial genomes.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Bacterial,Bacterial: genetics,Contig Mapping,Contig Mapping: methods,DNA,DNA: methods,Genome,Genomics,Genomics: methods,Research Design,Sequence Analysis},
-month = feb,
-number = {2},
-pages = {324--30},
-pmid = {18083777},
-title = {{Short read fragment assembly of bacterial genomes.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2203630\&tool=pmcentrez\&rendertype=abstract},
-volume = {18},
-year = {2008}
-}
-@article{Li2003,
-abstract = {In shotgun sequencing projects, the genome or BAC length is not always known. We approach estimating genome length by first estimating the repeat structure of the genome or BAC, sometimes of interest in its own right, on the basis of a set of random reads from a genome project. Moreover, we can find the consensus for repeat families before assembly. Our methods are based on the l-tuple content of the reads.},
-author = {Li, Xiaoman and Waterman, Michael S},
-doi = {10.1101/gr.1251803},
-file = {:home/gus/Documents/Mendeley Desktop/Li, Waterman\_2003\_Estimating the repeat structure and length of DNA sequences using L-tuples.pdf:pdf},
-issn = {1088-9051},
-journal = {Genome research},
-keywords = {Algorithms,Artificial,Bacterial,Bacterial: genetics,Base Composition,Chromosome Mapping,Chromosome Mapping: statistics \& numerical data,Chromosomes,Computational Biology,Computational Biology: statistics \& numerical data,Computer Simulation,Computer Simulation: statistics \& numerical data,Consensus Sequence,DNA,Mathematical Computing,Nucleic Acid,Nucleic Acid: genetics,Poisson Distribution,Repetitive Sequences,Software},
-month = aug,
-number = {8},
-pages = {1916--22},
-pmid = {12902383},
-title = {{Estimating the repeat structure and length of DNA sequences using L-tuples.}},
-url = {http://genome.cshlp.org/cgi/content/abstract/13/8/1916},
-volume = {13},
-year = {2003}
-}
-@article{Medvedev2011,
-abstract = {The continuing improvements to high-throughput sequencing (HTS) platforms have begun to unfold a myriad of new applications. As a result, error correction of sequencing reads remains an important problem. Though several tools do an excellent job of correcting datasets where the reads are sampled close to uniformly, the problem of correcting reads coming from drastically non-uniform datasets, such as those from single-cell sequencing, remains open.},
-author = {Medvedev, Paul and Scott, Eric and Kakaradov, Boyko and Pevzner, Pavel},
-doi = {10.1093/bioinformatics/btr208},
-file = {:home/gus/Documents/Mendeley Desktop/Medvedev et al.\_2011\_Error correction of high-throughput sequencing datasets with non-uniform coverage.pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-month = jul,
-number = {13},
-pages = {i137--i141},
-pmid = {21685062},
-title = {{Error correction of high-throughput sequencing datasets with non-uniform coverage.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=3117386\&tool=pmcentrez\&rendertype=abstract},
-volume = {27},
-year = {2011}
-}
-@inproceedings{Chazelle:2004:BFE:982792.982797,
-address = {Philadelphia, PA, USA},
-author = {Chazelle, Bernard and Kilian, Joe and Rubinfeld, Ronitt and Tal, Ayellet},
-booktitle = {Proceedings of the fifteenth annual ACM-SIAM symposium on Discrete algorithms},
-file = {:home/gus/Documents/Mendeley Desktop/Chazelle et al.\_2004\_The Bloomier filter an efficient data structure for static support lookup tables.pdf:pdf},
-isbn = {0-89871-558-X},
-pages = {30--39},
-publisher = {Society for Industrial and Applied Mathematics},
-series = {SODA '04},
-title = {{The Bloomier filter: an efficient data structure for static support lookup tables}},
-url = {http://dl.acm.org/citation.cfm?id=982797 http://dl.acm.org/citation.cfm?id=982792.982797},
-year = {2004}
-}
-@article{Michael1996,
-address = {New York, New York, USA},
-author = {Michael, Maged M. and Scott, Michael L.},
-doi = {10.1145/248052.248106},
-file = {:home/gus/Documents/Mendeley Desktop/Michael, Scott\_1996\_Simple, fast, and practical non-blocking and blocking concurrent queue algorithms.pdf:pdf},
-isbn = {0897918002},
-journal = {Proceedings of the fifteenth annual ACM symposium on Principles of distributed computing - PODC '96},
-keywords = {compare and swap,concurrent queue,lock-free,multiprogramming,non-blocking},
-pages = {267--275},
-publisher = {ACM Press},
-title = {{Simple, fast, and practical non-blocking and blocking concurrent queue algorithms}},
-url = {http://portal.acm.org/citation.cfm?doid=248052.248106},
-year = {1996}
-}
-@article{Pugh1990,
-author = {Pugh, William},
-doi = {10.1145/78973.78977},
-file = {:home/gus/Documents/Mendeley Desktop//Pugh\_1990\_Skip lists a probabilistic alternative to balanced trees.pdf:pdf},
-issn = {00010782},
-journal = {Communications of the ACM},
-keywords = {data structures,searching,trees},
-month = jun,
-number = {6},
-pages = {668--676},
-publisher = {ACM},
-title = {{Skip lists: a probabilistic alternative to balanced trees}},
-url = {http://dl.acm.org/citation.cfm?id=78973.78977 http://dl.acm.org/citation.cfm?id=78977,},
-volume = {33},
-year = {1990}
-}
-@article{Pevzner:2001uq,
-abstract = {For the last 20 years, fragment assembly in DNA sequencing followed the "overlap-layout-consensus" paradigm that is used in all currently available assembly tools. Although this approach proved useful in assembling clones, it faces difficulties in genomic shotgun assembly. We abandon the classical "overlap-layout-consensus" approach in favor of a new euler algorithm that, for the first time, resolves the 20-year-old "repeat problem" in fragment assembly. Our main result is the reduction of the fragment assembly to a variation of the classical Eulerian path problem that allows one to generate accurate solutions of large-scale sequencing problems. euler, in contrast to the celera assembler, does not mask such repeats but uses them instead as a powerful fragment assembly tool.},
-author = {Pevzner, P A and Tang, H and Waterman, M S},
-doi = {10.1073/pnas.171285098},
-file = {:home/gus/Documents/Mendeley Desktop/Pevzner, Tang, Waterman\_2001\_An Eulerian path approach to DNA fragment assembly.pdf:pdf},
-journal = {Proc Natl Acad Sci U S A},
-month = aug,
-number = {17},
-pages = {9748--9753},
-pmid = {11504945},
-title = {{An Eulerian path approach to DNA fragment assembly}},
-volume = {98},
-year = {2001}
-}
-@article{Venter2001,
-author = {Venter, JC and Adams, MD and Myers, EW},
-file = {:home/gus/Documents/Mendeley Desktop/Venter, Adams, Myers\_2001\_The sequence of the human genome.pdf:pdf},
-journal = {Science's \ldots},
-title = {{The sequence of the human genome}},
-url = {http://stke.sciencemag.org/cgi/content/abstract/sci;291/5507/1304},
-year = {2001}
-}
-@article{Schroder2009,
-abstract = {MOTIVATION: Second-generation sequencing technologies produce a massive amount of short reads in a single experiment. However, sequencing errors can cause major problems when using this approach for de novo sequencing applications. Moreover, existing error correction methods have been designed and optimized for shotgun sequencing. Therefore, there is an urgent need for the design of fast and accurate computational methods and tools for error correction of large amounts of short read data. RESULTS: We present SHREC, a new algorithm for correcting errors in short-read data that uses a generalized suffix trie on the read data as the underlying data structure. Our results show that the method can identify erroneous reads with sensitivity and specificity of over 99\% and 96\% for simulated data with error rates of up to 3\% as well as for real data. Furthermore, it achieves an error correction accuracy of over 80\% for simulated data and over 88\% for real data. These results are clearly superior to previously published approaches. SHREC is available as an efficient open-source Java implementation that allows processing of 10 million of short reads on a standard workstation.},
-author = {Schr\"{o}der, Jan and Schr\"{o}der, Heiko and Puglisi, Simon J and Sinha, Ranjan and Schmidt, Bertil},
-doi = {10.1093/bioinformatics/btp379},
-file = {:home/gus/Documents/Mendeley Desktop/Schr\"{o}der et al.\_2009\_SHREC a short-read error correction method.pdf:pdf;:home/gus/Documents/Mendeley Desktop/Schr\"{o}der et al.\_2009\_SHREC a short-read error correction method(2).pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-keywords = {Algorithms,Computational Biology,Computational Biology: methods,DNA,DNA: genetics,DNA: methods,Databases,Error correction,Genome,Genome: genetics,Nucleic Acid,Research Design,Sequence Analysis,Time Factors},
-mendeley-tags = {Error correction},
-month = sep,
-number = {17},
-pages = {2157--63},
-pmid = {19542152},
-title = {{SHREC: a short-read error correction method.}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/25/17/2157},
-volume = {25},
-year = {2009}
-}
-@article{Richter2008,
-abstract = {The new research field of metagenomics is providing exciting insights into various, previously unclassified ecological systems. Next-generation sequencing technologies are producing a rapid increase of environmental data in public databases. There is great need for specialized software solutions and statistical methods for dealing with complex metagenome data sets.},
-author = {Richter, Daniel C and Ott, Felix and Auch, Alexander F and Schmid, Ramona and Huson, Daniel H},
-doi = {10.1371/journal.pone.0003373},
-editor = {Field, Dawn},
-file = {:home/gus/Documents/Mendeley Desktop/Richter et al.\_2008\_MetaSim a sequencing simulator for genomics and metagenomics.pdf:pdf},
-issn = {1932-6203},
-journal = {PloS one},
-keywords = {Databases, Genetic,Genomics,Models, Theoretical,User-Computer Interface},
-month = jan,
-number = {10},
-pages = {e3373},
-pmid = {18841204},
-publisher = {Public Library of Science},
-title = {{MetaSim: a sequencing simulator for genomics and metagenomics.}},
-url = {http://dx.plos.org/10.1371/journal.pone.0003373},
-volume = {3},
-year = {2008}
-}
-@article{Brown2012,
-abstract = {Deep shotgun sequencing and analysis of genomes, transcriptomes, amplified single-cell genomes, and metagenomes enable the sensitive investigation of a wide range of biological phenomena. However, it is increasingly difficult to deal with the volume of data emerging from deep short-read sequencers, in part because of random and systematic sampling variation as well as a high sequencing error rate. These challenges have led to the development of entire new classes of short-read mapping tools, as well as new \{$\backslash$em de novo\} assemblers. Even newer assembly strategies for dealing with transcriptomes, single-cell genomes, and metagenomes have also emerged. Despite these advances, algorithms and compute capacity continue to be challenged by the continued improvements in sequencing technology throughput. We here describe an approach we term digital normalization, a single-pass computational algorithm that discards redundant data and both sampling variation and the number of errors present in deep sequencing data sets. Digital normalization substantially reduces the size of data sets and accordingly decreases the memory and time requirements for \{$\backslash$em de novo\} sequence assembly, all without significantly impacting content of the generated contigs. In doing so, it converts high random coverage to low systematic coverage. Digital normalization is an effective and efficient approach to normalizing coverage, removing errors, and reducing data set size for shotgun sequencing data sets. It is particularly useful for reducing the compute requirements for \{$\backslash$em de novo\} sequence assembly. We demonstrate this for the assembly of microbial genomes, amplified single-cell genomic data, and transcriptomic data. The software is freely available for use and modification.},
-archivePrefix = {arXiv},
-arxivId = {1203.4802},
-author = {Brown, C. Titus and Howe, Adina and Zhang, Qingpeng and Pyrkosz, Alexis B. and Brom, Timothy H.},
-eprint = {1203.4802},
-file = {:home/gus/Documents/Mendeley Desktop/Brown et al.\_2012\_A single pass approach to reducing sampling variation, removing errors, and scaling \{em de novo\} assembly of shotgun sequences.pdf:pdf},
-month = mar,
-title = {{A single pass approach to reducing sampling variation, removing errors, and scaling \{$\backslash$em de novo\} assembly of shotgun sequences}},
-url = {http://arxiv.org/abs/1203.4802},
-year = {2012}
-}
-@article{Nagaraj2007,
-abstract = {Expressed sequence tag (EST) sequencing projects are underway for numerous organisms, generating millions of short, single-pass nucleotide sequence reads, accumulating in EST databases. Extensive computational strategies have been developed to organize and analyse both small- and large-scale EST data for gene discovery, transcript and single nucleotide polymorphism analysis as well as functional annotation of putative gene products. We provide an overview of the significance of ESTs in the genomic era, their properties and the applications of ESTs. Methods adopted for each step of EST analysis by various research groups have been compared. Challenges that lie ahead in organizing and analysing the ever increasing EST data have also been identified. The most appropriate software tools for EST pre-processing, clustering and assembly, database matching and functional annotation have been compiled (available online from http://biolinfo.org/EST). We propose a road map for EST analysis to accelerate the effective analyses of EST data sets. An investigation of EST analysis platforms reveals that they all terminate prior to downstream functional annotation including gene ontologies, motif/pattern analysis and pathway mapping.},
-author = {Nagaraj, Shivashankar H and Gasser, Robin B and Ranganathan, Shoba},
-doi = {10.1093/bib/bbl015},
-file = {:home/gus/Documents/Mendeley Desktop/Nagaraj, Gasser, Ranganathan\_2007\_A hitchhiker's guide to expressed sequence tag (EST) analysis.pdf:pdf;:home/gus/Documents/Mendeley Desktop/Nagaraj, Gasser, Ranganathan\_2007\_A hitchhiker's guide to expressed sequence tag (EST) analysis(2).pdf:pdf},
-issn = {1467-5463},
-journal = {Briefings in bioinformatics},
-keywords = {Animals,Complementary,Complementary: chemistry,Consensus Sequence,Consensus Sequence: genetics,DNA,Databases,Expressed Sequence Tags,Genetic,Genetic: standards,Genomics,Genomics: methods,Humans,Nucleic Acid,Nucleic Acid: standards,RNA,Software,Untranslated Regions,Untranslated Regions: chemistry},
-mendeley-tags = {RNA},
-month = jan,
-number = 1,
-pages = {6--21},
-pmid = 16772268,
-title = {{A hitchhiker's guide to expressed sequence tag (EST) analysis.}},
-url = {http://bib.oxfordjournals.org/cgi/content/abstract/8/1/6},
-volume = 8,
-year = 2007
-}
-@article{Zimin2009,
-abstract = {The genome of the domestic cow, Bos taurus, was sequenced using a mixture of hierarchical and whole-genome shotgun sequencing methods.},
-author = {Zimin, Aleksey V and Delcher, Arthur L and Florea, Liliana and Kelley, David R and Schatz, Michael C and Puiu, Daniela and Hanrahan, Finnian and Pertea, Geo and {Van Tassell}, Curtis P and Sonstegard, Tad S and Mar\c{c}ais, Guillaume and Roberts, Michael and Subramanian, Poorani and Yorke, James a and Salzberg, Steven L},
-doi = {10.1186/gb-2009-10-4-r42},
-file = {:home/gus/Documents/Mendeley Desktop/Zimin et al.\_2009\_A whole-genome assembly of the domestic cow, Bos taurus.pdf:pdf},
-issn = {1465-6914},
-journal = {Genome biology},
-keywords = {Animals,Cattle,Cattle: genetics,Chromosome Mapping,Female,Genome,Genome, Human,Genome, Human: genetics,Genome: genetics,Genomics,Humans,Male,Sequence Analysis, DNA,Sequence Analysis, DNA: methods,Sequence Analysis, DNA: statistics \& numerical dat,Synteny,Y Chromosome,Y Chromosome: genetics},
-month = jan,
-number = {4},
-pages = {R42},
-pmid = {19393038},
-title = {{A whole-genome assembly of the domestic cow, Bos taurus.}},
-url = {http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2688933\&tool=pmcentrez\&rendertype=abstract},
-volume = {10},
-year = {2009}
-}
-@article{shi2010parallel,
-author = {Shi, H. and Schmidt, B. and Liu, W. and M\"{u}ller-Wittig, W.},
-file = {:home/gus/Documents/Mendeley Desktop/Shi et al.\_2010\_A parallel algorithm for error correction in high-throughput short-read data on CUDA-enabled graphics hardware.pdf:pdf},
-journal = {Journal of Computational Biology},
-number = {4},
-pages = {603--615},
-publisher = {Mary Ann Liebert, Inc. 140 Huguenot Street, 3rd Floor New Rochelle, NY 10801 USA},
-title = {{A parallel algorithm for error correction in high-throughput short-read data on CUDA-enabled graphics hardware}},
-url = {http://www.liebertonline.com/doi/abs/10.1089/cmb.2009.0062},
-volume = {17},
-year = {2010}
-}
-@article{Gibbs2012,
-author = {Gibbs, Richard A and Rogers, Jeffrey},
-doi = {10.1038/483164a},
-file = {:home/gus/Documents/Mendeley Desktop/Gibbs, Rogers\_2012\_Genomics Gorilla gorilla gorilla.pdf:pdf},
-issn = {1476-4687},
-journal = {Nature},
-month = mar,
-number = {7388},
-pages = {164--5},
-pmid = {22398552},
-publisher = {Nature Publishing Group, a division of Macmillan Publishers Limited. All Rights Reserved.},
-shorttitle = {Nature},
-title = {{Genomics: Gorilla gorilla gorilla.}},
-url = {http://dx.doi.org/10.1038/483164a},
-volume = {483},
-year = {2012}
-}
-@article{Ruffalo2011,
-abstract = {Motivation: The advent of next-generation sequencing (NGS) techniques presents many novel opportunities for many applications in life sciences. The vast number of short reads produced by these techniques, however, pose significant computational challenges. The first step in many types of genomic analysis is the mapping of short reads to a reference genome, and several groups have developed dedicated algorithms and software packages to perform this function. As the developers of these packages optimize their algorithms with respect to various considerations, the relative merits of different software packages remain unclear. However, for scientists who generate and use NGS data for their specific research projects, an important consideration is choosing the software that is most suitable for their application. Results: With a view to comparing existing short read alignment software, we develop a simulation and evaluation suite, SEAL, which simulates NGS runs for different configurations of various factors, including sequencing error, indels and coverage. We also develop criteria to compare the performances of software with disparate output structure (e.g. some packages return a single alignment while some return multiple possible alignments). Using these criteria, we comprehensively evaluate the performances of Bowtie, BWA, mr- and mrsFAST, Novoalign, SHRiMP and SOAPv2, with regard to accuracy and runtime. Conclusion: We expect that the results presented here will be useful to investigators in choosing the alignment software that is most suitable for their specific research aims. Our results also provide insights into the factors that should be considered to use alignment results effectively. SEAL can also be used to evaluate the performance of algorithms that use deep sequencing data for various purposes (e.g. identification of genomic variants). Availability: SEAL is available as open source at http://compbio.case.edu/seal/. Contact: matthew.ruffalo@case.edu Supplementary information: Supplementary data are available at Bioinformatics online.},
-author = {Ruffalo, M. and LaFramboise, T. and Koyuturk, M.},
-doi = {10.1093/bioinformatics/btr477},
-file = {:home/gus/Documents/Mendeley Desktop/Ruffalo, LaFramboise, Koyuturk\_2011\_Comparative analysis of algorithms for next-generation sequencing read alignment.pdf:pdf},
-issn = {1367-4803},
-journal = {Bioinformatics},
-month = aug,
-number = {20},
-pages = {2790--2796},
-title = {{Comparative analysis of algorithms for next-generation sequencing read alignment}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/27/20/2790},
-volume = {27},
-year = {2011}
-}
-@article{Panda2010,
-annote = {10.1038/nature08696},
-author = {Li, Ruiqiang and Fan, Wei and Tian, Geng and Zhu, Hongmei and He, Lin and Cai, Jing and Huang, Quanfei and Cai, Qingle and Li, Bo and Bai, Yinqi and Zhang, Zhihe and Zhang, Yaping and Wang, Wen and Li, Jun and Wei, Fuwen and Li, Heng and Jian, Min and Li, Jianwen and Zhang, Zhaolei and Nielsen, Rasmus and Li, Dawei and Gu, Wanjun and Yang, Zhentao and Xuan, Zhaoling and Ryder, Oliver A and Leung, Frederick Chi-Ching and Zhou, Yan and Cao, Jianjun and Sun, Xiao and Fu, Yonggui and Fang, Xiaodong and Guo, Xiaosen and Wang, Bo and Hou, Rong and Shen, Fujun and Mu, Bo and Ni, Peixiang and Lin, Runmao and Qian, Wubin and Wang, Guodong and Yu, Chang and Nie, Wenhui and Wang, Jinhuan and Wu, Zhigang and Liang, Huiqing and Min, Jiumeng and Wu, Qi and Cheng, Shifeng and Ruan, Jue and Wang, Mingwei and Shi, Zhongbin and Wen, Ming and Liu, Binghang and Ren, Xiaoli and Zheng, Huisong and Dong, Dong and Cook, Kathleen and Shan, Gao and Zhang, Hao and Kosiol, Carolin and Xie, Xueying and Lu, Zuhong and Zheng, Hancheng and Li, Yingrui and Steiner, Cynthia C and Lam, Tommy Tsan-Yuk and Lin, Siyuan and Zhang, Qinghui and Li, Guoqing and Tian, Jing and Gong, Timing and Liu, Hongde and Zhang, Dejin and Fang, Lin and Ye, Chen and Zhang, Juanbin and Hu, Wenbo and Xu, Anlong and Ren, Yuanyuan and Zhang, Guojie and Bruford, Michael W and Li, Qibin and Ma, Lijia and Guo, Yiran and An, Na and Hu, Yujie and Zheng, Yang and Shi, Yongyong and Li, Zhiqiang and Liu, Qing and Chen, Yanling and Zhao, Jing and Qu, Ning and Zhao, Shancen and Tian, Feng and Wang, Xiaoling and Wang, Haiyin and Xu, Lizhi and Liu, Xiao and Vinar, Tomas and Wang, Yajun and Lam, Tak-Wah and Yiu, Siu-Ming and Liu, Shiping and Zhang, Hemin and Li, Desheng and Huang, Yan and Wang, Xia and Yang, Guohua and Jiang, Zhi and Wang, Junyi and Qin, Nan and Li, Li and Li, Jingxiang and Bolund, Lars and Kristiansen, Karsten and Wong, Gane Ka-Shu and Olson, Maynard and Zhang, Xiuqing and Li, Songgang and Yang, Huanming and Wang, Jian and Wang, Jun},
-doi = {http://dx.doi.org/10.1038/nature08696},
-issn = {0028-0836},
-journal = {Nature},
-number = {7279},
-pages = {311--317},
-publisher = {Macmillan Publishers Limited. All rights reserved},
-title = {{The sequence and de novo assembly of the giant panda genome}},
-volume = {463},
-year = {2010}
-}
-@article{Liu2012,
-abstract = {SUMMARY: SOAP3 is the first short read alignment tool that leverages the multi-processors in a graphic processing unit (GPU) to achieve a drastic improvement in speed. We adapted the compressed full-text index (BWT) used by SOAP2 in view of the advantages and disadvantages of GPU. When tested with millions of Illumina Hiseq 2000 length-100bp reads, SOAP3 takes less than 30 seconds to align a million read pairs onto the human reference genome and is at least 7.5 and 20 times faster than BWA and Bowtie, respectively. For aligning reads with up to 4 mismatches, SOAP3 aligns slightly more reads than BWA and Bowtie; this is because SOAP3, unlike BWA and Bowtie, is not heuristic-based and always reports all answers. AVAILABILITY: SOAP3 is available at: http://www.cs.hku.hk/2bwt-tools/soap3; and http://soap.genomics.org.cn/soap3.html. CONTACT: liruiqiang@gmail.com, twlam@cs.hku.hk.},
-author = {Liu, Chi-Man and Wong, Thomas and Wu, Edward and Luo, Ruibang and Yiu, Siu-Ming and Li, Yingrui and Wang, B and Yu, C and Chu, X and Zhao, K and Li, Ruiqiang and Lam, Tak-Wah},
-doi = {10.1093/bioinformatics/bts061},
-file = {:home/gus/Documents/Mendeley Desktop/Liu et al.\_2012\_SOAP3 Ultra-fast GPU-based parallel alignment tool for short reads.pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-month = jan,
-number = {6},
-pages = {878--879},
-pmid = {22285832},
-title = {{SOAP3: Ultra-fast GPU-based parallel alignment tool for short reads.}},
-url = {http://bioinformatics.oxfordjournals.org/cgi/content/abstract/28/6/878},
-volume = {28},
-year = {2012}
-}
-@article{David2011,
-abstract = {We report on a major update (version 2) of the original SHort Read Mapping Program (SHRiMP). SHRiMP2 primarily targets mapping sensitivity, and is able to achieve high accuracy at a very reasonable speed. SHRiMP2 supports both letter space and color space (AB/SOLiD) reads, enables for direct alignment of paired reads and uses parallel computation to fully utilize multi-core architectures. AVAILABILITY: SHRiMP2 executables and source code are freely available at: http://compbio.cs.toronto.edu/shrimp/.},
-author = {David, Matei and Dzamba, Misko and Lister, Dan and Ilie, Lucian and Brudno, Michael},
-doi = {10.1093/bioinformatics/btr046},
-file = {:home/gus/Documents/Mendeley Desktop/David et al.\_2011\_SHRiMP2 sensitive yet practical SHort Read Mapping.pdf:pdf},
-issn = {1367-4811},
-journal = {Bioinformatics (Oxford, England)},
-keywords = {Algorithms,Chromosome Mapping,DNA,Genetic,Genomics,Genomics: methods,Polymorphism,Sequence Alignment,Sequence Analysis,Software},
-month = apr,
-number = {7},
-pages = {1011--2},
-pmid = {21278192},
-title = {{SHRiMP2: sensitive yet practical SHort Read Mapping.}},
-url = {http://www.ncbi.nlm.nih.gov/pubmed/21278192},
-volume = {27},
-year = {2011}
-}
-@article{Waterston2002,
-abstract = {The sequence of the mouse genome is a key informational tool for understanding the contents of the human genome and a key experimental tool for biomedical research. Here, we report the results of an international collaboration to produce a high-quality draft sequence of the mouse genome. We also present an initial comparative analysis of the mouse and human genomes, describing some of the insights that can be gleaned from the two sequences. We discuss topics including the analysis of the evolutionary forces shaping the size, structure and sequence of the genomes; the conservation of large-scale synteny across most of the genomes; the much lower extent of sequence orthology covering less than half of the genomes; the proportions of the genomes under selection; the number of protein-coding genes; the expansion of gene families related to reproduction and immunity; the evolution of proteins; and the identification of intraspecies polymorphism.},
-author = {Waterston, Robert H and Lindblad-Toh, Kerstin and Birney, Ewan and Rogers, Jane and Abril, Josep F and Agarwal, Pankaj and Agarwala, Richa and Ainscough, Rachel and Alexandersson, Marina and An, Peter and Antonarakis, Stylianos E and Attwood, John and Baertsch, Robert and Bailey, Jonathon and Barlow, Karen and Beck, Stephan and Berry, Eric and Birren, Bruce and Bloom, Toby and Bork, Peer and Botcherby, Marc and Bray, Nicolas and Brent, Michael R and Brown, Daniel G and Brown, Stephen D and Bult, Carol and Burton, John and Butler, Jonathan and Campbell, Robert D and Carninci, Piero and Cawley, Simon and Chiaromonte, Francesca and Chinwalla, Asif T and Church, Deanna M and Clamp, Michele and Clee, Christopher and Collins, Francis S and Cook, Lisa L and Copley, Richard R and Coulson, Alan and Couronne, Olivier and Cuff, James and Curwen, Val and Cutts, Tim and Daly, Mark and David, Robert and Davies, Joy and Delehaunty, Kimberly D and Deri, Justin and Dermitzakis, Emmanouil T and Dewey, Colin and Dickens, Nicholas J and Diekhans, Mark and Dodge, Sheila and Dubchak, Inna and Dunn, Diane M and Eddy, Sean R and Elnitski, Laura and Emes, Richard D and Eswara, Pallavi and Eyras, Eduardo and Felsenfeld, Adam and Fewell, Ginger A and Flicek, Paul and Foley, Karen and Frankel, Wayne N and Fulton, Lucinda A and Fulton, Robert S and Furey, Terrence S and Gage, Diane and Gibbs, Richard A and Glusman, Gustavo and Gnerre, Sante and Goldman, Nick and Goodstadt, Leo and Grafham, Darren and Graves, Tina A and Green, Eric D and Gregory, Simon and Guig\'{o}, Roderic and Guyer, Mark and Hardison, Ross C and Haussler, David and Hayashizaki, Yoshihide and Hillier, LaDeana W and Hinrichs, Angela and Hlavina, Wratko and Holzer, Timothy and Hsu, Fan and Hua, Axin and Hubbard, Tim and Hunt, Adrienne and Jackson, Ian and Jaffe, David B and Johnson, L Steven and Jones, Matthew and Jones, Thomas A and Joy, Ann and Kamal, Michael and Karlsson, Elinor K and Karolchik, Donna and Kasprzyk, Arkadiusz and Kawai, Jun and Keibler, Evan and Kells, Cristyn and Kent, W James and Kirby, Andrew and Kolbe, Diana L and Korf, Ian and Kucherlapati, Raju S and Kulbokas, Edward J and Kulp, David and Landers, Tom and Leger, J P and Leonard, Steven and Letunic, Ivica and Levine, Rosie and Li, Jia and Li, Ming and Lloyd, Christine and Lucas, Susan and Ma, Bin and Maglott, Donna R and Mardis, Elaine R and Matthews, Lucy and Mauceli, Evan and Mayer, John H and McCarthy, Megan and McCombie, W Richard and McLaren, Stuart and McLay, Kirsten and McPherson, John D and Meldrim, Jim and Meredith, Beverley and Mesirov, Jill P and Miller, Webb and Miner, Tracie L and Mongin, Emmanuel and Montgomery, Kate T and Morgan, Michael and Mott, Richard and Mullikin, James C and Muzny, Donna M and Nash, William E and Nelson, Joanne O and Nhan, Michael N and Nicol, Robert and Ning, Zemin and Nusbaum, Chad and O'Connor, Michael J and Okazaki, Yasushi and Oliver, Karen and Overton-Larty, Emma and Pachter, Lior and Parra, Gen\'{\i}s and Pepin, Kymberlie H and Peterson, Jane and Pevzner, Pavel and Plumb, Robert and Pohl, Craig S and Poliakov, Alex and Ponce, Tracy C and Ponting, Chris P and Potter, Simon and Quail, Michael and Reymond, Alexandre and Roe, Bruce A and Roskin, Krishna M and Rubin, Edward M and Rust, Alistair G and Santos, Ralph and Sapojnikov, Victor and Schultz, Brian and Schultz, J\"{o}rg and Schwartz, Matthias S and Schwartz, Scott and Scott, Carol and Seaman, Steven and Searle, Steve and Sharpe, Ted and Sheridan, Andrew and Shownkeen, Ratna and Sims, Sarah and Singer, Jonathan B and Slater, Guy and Smit, Arian and Smith, Douglas R and Spencer, Brian and Stabenau, Arne and Stange-Thomann, Nicole and Sugnet, Charles and Suyama, Mikita and Tesler, Glenn and Thompson, Johanna and Torrents, David and Trevaskis, Evanne and Tromp, John and Ucla, Catherine and Ureta-Vidal, Abel and Vinson, Jade P and {Von Niederhausern}, Andrew C and Wade, Claire M and Wall, Melanie and Weber, Ryan J and Weiss, Robert B and Wendl, Michael C and West, Anthony P and Wetterstrand, Kris and Wheeler, Raymond and Whelan, Simon and Wierzbowski, Jamey and Willey, David and Williams, Sophie and Wilson, Richard K and Winter, Eitan and Worley, Kim C and Wyman, Dudley and Yang, Shan and Yang, Shiaw-Pyng and Zdobnov, Evgeny M and Zody, Michael C and Lander, Eric S},
-doi = {10.1038/nature01262},
-file = {:home/gus/Documents/Mendeley Desktop/Waterston et al.\_2002\_Initial sequencing and comparative analysis of the mouse genome.pdf:pdf},
-issn = {0028-0836},
-journal = {Nature},
-keywords = {Animal,Animals,Base Composition,Chromosomes, Mammalian,Chromosomes, Mammalian: genetics,Conserved Sequence,Conserved Sequence: genetics,CpG Islands,CpG Islands: genetics,DNA,Evolution, Molecular,Gene Expression Regulation,Genes,Genes: genetics,Genetic,Genetic Variation,Genetic Variation: genetics,Genome,Genome, Human,Genomics,Human,Humans,Knockout,Mammalian,Mammalian: genetics,Mice,Mice, Knockout,Mice, Transgenic,Mice: classification,Mice: genetics,Models, Animal,Molecular,Multigene Family,Multigene Family: genetics,Mutagenesis,Neoplasms,Neoplasms: genetics,Nucleic Acid,Nucleic Acid: genetics,Physical Chromosome Mapping,Proteome,Proteome: genetics,Pseudogenes,Pseudogenes: genetics,Quantitative Trait Loci,Quantitative Trait Loci: genetics,RNA, Untranslated,RNA, Untranslated: genetics,Repetitive Sequences, Nucleic Acid,Repetitive Sequences, Nucleic Acid: genetics,Selection, Genetic,Sequence Analysis, DNA,Sex Chromosomes,Sex Chromosomes: genetics,Species Specificity,Synteny,Transgenic,Untranslated,Untranslated: genetics},
-month = dec,
-number = {6915},
-pages = {520--62},
-pmid = {12466850},
-publisher = {Macmillian Magazines Ltd.},
-shorttitle = {Nature},
-title = {{Initial sequencing and comparative analysis of the mouse genome.}},
-url = {http://dx.doi.org/10.1038/nature01262},
-volume = {420},
-year = {2002}
-}
-@article{Mackenzie2001,
-abstract = {Rhodobacter sphaeroides 2.4.1 is an alpha-3 purple nonsulfur eubacterium with an extensive metabolic repertoire. Under anaerobic conditions, it is able to grow by photosynthesis, respiration and fermentation. Photosynthesis may be photoheterotrophic using organic compounds as both a carbon and a reducing source, or photoautotrophic using carbon dioxide as the sole carbon source and hydrogen as the source of reducing power. In addition, R. sphaeroides can grow both chemoheterotrophically and chemoautotrophically. The structural components of this metabolically diverse organism and their modes of integrated regulation are encoded by a genome of approximately 4.5 Mb in size. The genome comprises two chromosomes CI and CII (2.9 and 0.9 Mb, respectively) and five other replicons. Sequencing of the genome has been carried out by two groups, the Joint Genome Institute, which carried out shotgun-sequencing of the entire genome and The University of Texas-Houston Medical School, which carried out a targeted sequencing strategy of CII. Here we describe our current understanding of the genome when data from both of these groups are combined. Previous work had suggested that the two chromosomes are equal partners sharing responsibilities for fundamental cellular processes. This view has been reinforced by our preliminary analysis of the virtually completed genome sequence. We also have some evidence to suggest that two of the plasmids, pRS241a and pRS241b encode chromosomal type functions and their role may be more than that of accessory elements, perhaps representing replicons in a transition state.},
-author = {Mackenzie, C and Choudhary, M and Larimer, F W and Predki, P F and Stilwagen, S and Armitage, J P and Barber, R D and Donohue, T J and Hosler, J P and Newman, J E and Shapleigh, J P and Sockett, R E and Zeilstra-Ryalls, J and Kaplan, S},
-doi = {10.1023/A:1013831823701},
-file = {:home/gus/Documents/Mendeley Desktop/Mackenzie et al.\_2001\_The home stretch, a first analysis of the nearly completed genome of Rhodobacter sphaeroides 2.4.1.pdf:pdf},
-issn = {1573-5079},
-journal = {Photosynthesis research},
-language = {en},
-month = jan,
-number = {1},
-pages = {19--41},
-pmid = {16228360},
-title = {{The home stretch, a first analysis of the nearly completed genome of Rhodobacter sphaeroides 2.4.1.}},
-url = {http://link.springer.com/article/10.1023/A\%3A1013831823701},
-volume = {70},
-year = {2001}
-}
-@article{Bentley2008,
-abstract = {DNA sequence information underpins genetic research, enabling discoveries of important biological or medical benefit. Sequencing projects have traditionally used long (400-800 base pair) reads, but the existence of reference sequences for the human and many other genomes makes it possible to develop new, fast approaches to re-sequencing, whereby shorter reads are compared to a reference to identify intraspecies genetic variation. Here we report an approach that generates several billion bases of accurate nucleotide sequence per experiment at low cost. Single molecules of DNA are attached to a flat surface, amplified in situ and used as templates for synthetic sequencing with fluorescent reversible terminator deoxyribonucleotides. Images of the surface are analysed to generate high-quality sequence. We demonstrate application of this approach to human genome sequencing on flow-sorted X chromosomes and then scale the approach to determine the genome sequence of a male Yoruba from Ibadan, Nigeria. We build an accurate consensus sequence from >30x average depth of paired 35-base reads. We characterize four million single-nucleotide polymorphisms and four hundred thousand structural variants, many of which were previously unknown. Our approach is effective for accurate, rapid and economical whole-genome re-sequencing and many other biomedical applications.},
-author = {Bentley, DR David R and Balasubramanian, Shankar and Swerdlow, Harold P and Smith, Geoffrey P and Milton, John and Brown, Clive G and Hall, Kevin P and Evers, Dirk J and Barnes, Colin L and Bignell, Helen R and Boutell, Jonathan M and Bryant, Jason and Carter, Richard J and {Keira Cheetham}, R and Cox, Anthony J and Ellis, Darren J and Flatbush, Michael R and Gormley, Niall A and Humphray, Sean J and Irving, Leslie J and Karbelashvili, Mirian S and Kirk, Scott M and Li, Heng and Liu, Xiaohai and Maisinger, Klaus S and Murray, Lisa J and Obradovic, Bojan and Ost, Tobias and Parkinson, Michael L and Pratt, Mark R and Rasolonjatovo, Isabelle M J and Reed, Mark T and Rigatti, Roberto and Rodighiero, Chiara and Ross, Mark T and Sabot, Andrea and Sankar, Subramanian V and Scally, Aylwyn and Schroth, Gary P and Smith, Melanie A Mark E and Smith, Vincent P and Spiridou, Anastassia and Torrance, Peta E and Tzonev, Svilen S and Vermaas, Eric H and Walter, Klaudia and Wu, Xiaolin and Zhang, Lu and Alam, Mohammed D and Anastasi, Carole and Aniebo, Ify C and Bailey, David M D and Bancarz, Iain R and Banerjee, Saibal and Barbour, Selena G and Baybayan, Primo A and Benoit, Vincent A and Benson, Kevin F and Bevis, Claire and Black, Phillip J and Boodhun, Asha and Brennan, Joe S and Bridgham, John A and Brown, Rob C and Brown, Andrew A and Buermann, Dale H and Bundu, Abass A and Burrows, James C and Carter, Nigel P and Castillo, Nestor and {Chiara E Catenazzi}, Maria and Chang, Simon and {Neil Cooley}, R and Crake, Natasha R and Dada, Olubunmi O and Diakoumakos, Konstantinos D and Dominguez-Fernandez, Belen and Earnshaw, David J and Egbujor, Ugonna C and Elmore, David W and Etchin, Sergey S and Ewan, Mark R and Fedurco, Milan and Fraser, Louise J and {Fuentes Fajardo}, Karin V and {Scott Furey}, W and George, David and Gietzen, Kimberley J and Goddard, Colin P and Golda, George S and Granieri, Philip A and Green, David E and Gustafson, David L and Hansen, Nancy F and Harnish, Kevin and Haudenschild, Christian D and Heyer, Narinder I and Hims, Matthew M and Ho, Johnny T and Horgan, Adrian M and Hoschler, Katya and Hurwitz, Steve and Ivanov, Denis V and Johnson, Maria Q and James, Terena and {Huw Jones}, T A and Kang, Gyoung-Dong and Kerelska, Tzvetana H and Kersey, Alan D and Khrebtukova, Irina and Kindwall, Alex P and Kingsbury, Zoya and Kokko-Gonzales, Paula I and Kumar, Anil and Laurent, Marc A and Lawley, Cynthia T and Lee, Sarah E and Lee, Xavier and Liao, Arnold K and Loch, Jennifer A and Lok, Mitch and Luo, Shujun and Mammen, Radhika M and Martin, John W and McCauley, Patrick G and McNitt, Paul and Mehta, Parul and Moon, Keith W and Mullens, Joe W and Newington, Taksina and Ning, Zemin and {Ling Ng}, Bee and Novo, Sonia M and O'Neill, Michael J and Osborne, Mark A and Osnowski, Andrew and Ostadan, Omead and Paraschos, Lambros L and Pickering, Lea and Pike, Alger C Andrew C and {Chris Pinkard}, D and Pliskin, Daniel P and Podhasky, Joe and Quijano, Victor J and Raczy, Come and Rae, Vicki H and Rawlings, Stephen R and {Chiva Rodriguez}, Ana and Roe, Phyllida M and Rogers, John Jane and {Rogert Bacigalupo}, Maria C and Romanov, Nikolai and Romieu, Anthony and Roth, Rithy K and Rourke, Natalie J and Ruediger, Silke T and Rusman, Eli and Sanches-Kuiper, Raquel M and Schenker, Martin R and Seoane, Josefina M and Shaw, Richard J and Shiver, Mitch K and Short, Steven W and Sizto, Ning L and Sluis, Johannes P and {Ernest Sohna Sohna}, Jean and Spence, Eric J and Stevens, Kim and Sutton, Neil and Szajkowski, Lukasz and Tregidgo, Carolyn L and Turcatti, Gerardo and Vandevondele, Stephanie and Verhovsky, Yuli and Virk, Selene M and Wakelin, Suzanne and Walcott, Gregory C and Wang, Jingwen and Worsley, Graham J and Yan, Juying and Yau, Ling and Zuerlein, Mike and Mullikin, James C and Hurles, Matthew E and McCooke, Nick J and West, John S and Oaks, Frank L and Lundberg, Peter L and Klenerman, David and Durbin, Richard and Smith, Anthony J},
-doi = {10.1038/nature07517},
-file = {:home/gus/Documents/Mendeley Desktop/Bentley et al.\_2008\_Accurate whole human genome sequencing using reversible terminator chemistry.pdf:pdf},
-issn = {1476-4687},
-journal = {Nature},
-keywords = {Chromosomes,Consensus Sequence,Consensus Sequence: genetics,DNA,DNA: economics,DNA: methods,Genome,Genomics,Genomics: economics,Genomics: methods,Genotype,Human,Human: genetics,Humans,Male,Nigeria,Polymorphism,Sensitivity and Specificity,Sequence Analysis,Single Nucleotide,Single Nucleotide: genetics,X,X: genetics},
-month = nov,
-number = {7218},
-pages = {53--9},
-pmid = {18987734},
-publisher = {Nature Publishing Group},
-title = {{Accurate whole human genome sequencing using reversible terminator chemistry.}},
-url = {http://www.nature.com/nature/journal/vaop/ncurrent/full/nature07517.html http://www.mendeley.com/research/accurate-whole-human-genome-sequencing-using-reversible-terminator-chemistry/},
-volume = {456},
-year = {2008}
-}
diff --git a/paper/bmc_article.bst b/paper/bmc_article.bst
deleted file mode 100755
index 6ba3747..0000000
--- a/paper/bmc_article.bst
+++ /dev/null
@@ -1,1888 +0,0 @@
-%%                                        %
- % bmc_article.bst              ver: 1.01 %
- %                                        %
- %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
- %%                                      %%
- %%  BibTeX BST file for BioMed Central  %%
- %%    a style syntax for latex .bib     %%
- %%           bibliographies             %%
- %%                                      %%
- %%         <1 September 2003>           %%
- %%                                      %%
- %%                                      %%
- %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
- % 
- % 
- % The order in the reference list is that by which the 
- % works were originally cited in the text, or that in 
- % the database.
- %
- %
- % This file is based on the style 'unsrt.bst'
- % ------------------------------------------ 
- % BibTeX standard bibliography style `unsrt'
- % version 0.99a for BibTeX versions 0.99a
- % or later, LaTeX version 2.09.
- % Copyright (C) 1985, all rights reserved.
- % Copying of this file is authorized only if either
- % (1) you make absolutely no changes to your copy, including name, or
- % (2) if you do make changes, you name it something other than
- % btxbst.doc, plain.bst, unsrt.bst, alpha.bst, and abbrv.bst.
- % This restriction helps ensure that all standard styles are identical.
- % The file btxbst.doc has the documentation for this style.
- % --------------------------------------------------------- 
-%%
-
- 
-
-
-ENTRY
-  { address
-    archive
-    author
-    booktitle
-    chapter
-    edition
-    editor
-    eid
-    howpublished
-    institution
-    journal
-    key
-    month
-    note
-    number
-    organization
-    pages
-    publisher
-    school
-    series
-    title
-    type
-    url
-    volume
-    year
-  }
-  {}
-  { label }
-
-
-% Global variables - most initialised and used locally.
-STRINGS { longest.label }
-STRINGS { cur tag source bibinfo}
-STRINGS { p q r s t z name names }
-STRINGS { lr lp lt ls}   % local copys fxns with these call no other fxns.
-INTEGERS { number.label longest.label.width }
-INTEGERS { multiresult nameptr namesleft numnames global.counter}
-INTEGERS { i j k l ll li}
-INTEGERS { output.state before.all mid.sentence after.sentence after.block }
-
-FUNCTION {init.state.consts}
-{ #0 'before.all :=
-  #1 'mid.sentence :=
-  #2 'after.sentence :=
-  #3 'after.block :=
-  #0 'global.counter :=
-}
-
-
-% Logical operators on integers
-FUNCTION {not}
-{   { #0 } { #1 } if$ 
-}
-FUNCTION {and}
-{   'skip$ { pop$ #0 } if$
-}
-FUNCTION {or}
-{   { pop$ #1 } 'skip$ if$
-}
-FUNCTION {field.or.null}
-{ duplicate$ empty$ { pop$ "" } 'skip$ if$
-}
-
-FUNCTION {remove.dots}
-{ 'z :=
-  ""
-  { z empty$ not }
-  { z #1 #1 substring$
-    z #2 global.max$ substring$ 'z :=
-    duplicate$ "." = 'pop$
-      { * }
-    if$
-  }
-  while$
-}
-
-%%
- % myreverse
- % 
- % Takes 1 string
- % Returns the myreverse string
- % 
- % not to be confused with REVERSE (opposite of ITERATE)
-%%
-FUNCTION {myreverse}
-{
-  'lt :=
-  "" 'ls :=
-  { lt empty$ not }
-  { 
-    lt #1 #1 substring$ ls * 'ls :=  
-    lt #2 global.max$ substring$ 'lt :=
-  }
-  while$ 
-  ls
-}
-
-%%
- % search 
- %
- % Takes 2 strings (txt, pattern)
- % Retruns 1 if found 0 if not 
-%% 
-FUNCTION {search}
-{ 
-  'lp :=     % pattern 
-  'lt :=     % text to search
-  #0 'i :=  % result  
-  lp text.length$ 'll := % length of the search pattern
-  { lt empty$ not }
-  {  lt #1 ll substring$ lp = 
-      { #1 'li :=  
-        "" 'lt := } % force exit
-      { lt #2 global.max$ substring$ 'lt := } % pop 1 char
-    if$
-  }
-  while$ 
-  li
-}
-
-
-%%
- % general replace
- %
- % Takes 3 strings (txt, pattern, replace-str)
- % replaces all instances of pattern
- % Retruns a new string
-%% 
-FUNCTION {replace}
-{ 
-  'lr :=     % replace string
-  'lp :=     % pattern 
-  'lt :=     % text to search
-  "" 'ls :=  % result string 
-  lp text.length$ 'll := % length of the search pattern
-  { lt empty$ not }
-  {  lt #1 ll substring$ lp = 
-      { ls lr * 'ls :=  
-        lt ll #1 + global.max$ substring$ 'lt := } 
-      { ls lt #1 #1 substring$ * 'ls :=  
-        lt #2 global.max$ substring$ 'lt := } 
-    if$
-  }
-  while$ 
-  ls
-}
-
-
-%%
- % strip.letters
- %
- % Takes 1 arg (string)
- % if string has letters get rid of them
- %  - useful for 2nd -> 2
- % Returns string
-%% 
-FUNCTION {strip.letters}
-{ 
-  "" 's :=
-  duplicate$ missing$
-    'pop$
-    { 
-      't := 
-       { t "" = not }
-       { % ascii '0' = 48,  '9' = 57  
-         t #1 #1 substring$ chr.to.int$ 'i :=  
-         i #47 > i #58 < and 
-           { s t #1 #1 substring$ * 's := } 
-           'skip$ 
-         if$
-         t #2 global.max$ substring$ 't :=
-       }
-       while$
-    }
-  if$
-  s
-}
-
-FUNCTION {output.nonnull}
-{ 's :=
-  output.state mid.sentence =
-    { ", " * write$ }
-    { output.state after.block =
-        { add.period$ write$
-          newline$
-          "\newblock " write$
-        }
-        { output.state before.all =
-            %{ "OS=(" * output.state int.to.str$ * ") " * write$ }
-            'write$
-            { add.period$ " " * write$ } % after.sentence
-          if$
-        }
-      if$
-      mid.sentence 'output.state :=
-    }
-  if$
-  s
-}
-
-FUNCTION {output}
-{ duplicate$ empty$
-    'pop$
-    'output.nonnull
-  if$
-}
-
-% raises an error (warning message) if type not present.
-FUNCTION {output.check}
-{ 't :=
-  duplicate$ empty$
-    { pop$ "empty " t * " in " * cite$ * warning$ }
-    'output.nonnull
-  if$
-}
-
-FUNCTION {fin.entry}
-{ add.period$
-  write$
-  newline$
-}
-
-FUNCTION {new.block}
-{ output.state before.all =
-    'skip$
-    { after.block 'output.state := }
-  if$
-}
-FUNCTION {new.sentence}
-{ output.state after.block =
-    'skip$
-    { output.state before.all =
-        'skip$
-        { after.sentence 'output.state := }
-      if$
-    }
-  if$
-}
-FUNCTION {add.blank}
-{  " " * before.all 'output.state :=
-}
-
-FUNCTION {add.bold.colon}
-{ duplicate$ empty$
-    'skip$
-    { "\textbf{:}" * add.blank }
-  if$
-}
-
-FUNCTION {add.colon}
-{ duplicate$ empty$
-    'skip$
-    { ":" * add.blank }
-  if$
-}
-FUNCTION {bold}
-{ duplicate$ empty$
-    { pop$ "" }
-    { "\textbf{" swap$ * "}" * }
-  if$
-}
-FUNCTION {emphasize}
-{ duplicate$ empty$
-    { pop$ "" }
-    { "\emph{" swap$ * "}" * }
-  if$
-}
-FUNCTION {tie.or.space.prefix}
-{ duplicate$ text.length$ #3 <
-    { "~" }
-    { " " }
-  if$
-  swap$
-}
-
-FUNCTION {capitalize}
-{ "u" change.case$ "t" change.case$ }
-
-FUNCTION {space.word}
-{ " " swap$ * " " * }
-
-% if field not entered - push empty string ""
-FUNCTION {bibinfo.check}
-{ swap$
-  duplicate$ missing$
-    { pop$ pop$
-      "" }
-    { duplicate$ empty$
-        { swap$ pop$ }
-        { swap$ pop$ }
-      if$
-    }
-  if$
-}
-FUNCTION {bibinfo.warn}
-{ swap$
-  duplicate$ missing$
-    {
-      swap$ "missing " swap$ * " in " * cite$ * warning$ pop$
-      ""
-    }
-    { duplicate$ empty$
-        {
-          swap$ "empty " swap$ * " in " * cite$ * warning$
-        }
-        { swap$
-          pop$
-        }
-      if$
-    }
-  if$
-}
-
-FUNCTION {format.thesis.type}
-{ type duplicate$ empty$
-    'pop$
-    { swap$ pop$
-      "t" change.case$ "type" bibinfo.check
-    }
-  if$
-}
-
-
- % Here are the language-specific definitions for explicit words.
- % Each function has a name bbl.xxx where xxx is the English word.
- % The language selected here is ENGLISH
-FUNCTION {bbl.and}
-{ "and"}
-
-FUNCTION {bbl.etal}
-{ "et~al." }
-
-FUNCTION {bbl.editors}
-{ "(Eds)" }
-%{ "editors" }
-
-FUNCTION {bbl.editor}
-{ "(Ed)" }
-%{ "editor" }
-
-FUNCTION {bbl.edby}
-{ "Edited by" }
-
-FUNCTION {bbl.edition}
-{ "edition" }
-%{ "edn." }
-
-FUNCTION {bbl.volume}
-{ "Volume" }
-%{ "vol." }
-
-FUNCTION {bbl.of}
-{ "of" }
-
-FUNCTION {bbl.number}
-{ "no." }
-
-FUNCTION {bbl.nr}
-{ "no." }
-
-FUNCTION {bbl.in}
-{ "in" }
-
-FUNCTION {bbl.pages}
-{ "" }
-
-FUNCTION {bbl.page}
-{ "" }
-
-FUNCTION {bbl.chapter}
-{ "chap." }
-
-FUNCTION {bbl.techrep}
-{ "Tech. Rep." }
-
-FUNCTION {bbl.mthesis}
-{ "Master's thesis" }
-
-FUNCTION {bbl.phdthesis}
-{ "PhD thesis" }
-
-MACRO {jan} {"Jan."}
-
-MACRO {feb} {"Feb."}
-
-MACRO {mar} {"Mar."}
-
-MACRO {apr} {"Apr."}
-
-MACRO {may} {"May"}
-
-MACRO {jun} {"Jun."}
-
-MACRO {jul} {"Jul."}
-
-MACRO {aug} {"Aug."}
-
-MACRO {sep} {"Sep."}
-
-MACRO {oct} {"Oct."}
-
-MACRO {nov} {"Nov."}
-
-MACRO {dec} {"Dec."}
-
-MACRO {acmcs} {"ACM Computing Surveys"}
-
-MACRO {acta} {"Acta Informatica"}
-
-MACRO {cacm} {"Communications of the ACM"}
-
-MACRO {ibmjrd} {"IBM Journal of Research and Development"}
-
-MACRO {ibmsj} {"IBM Systems Journal"}
-
-MACRO {ieeese} {"IEEE Transactions on Software Engineering"}
-
-MACRO {ieeetc} {"IEEE Transactions on Computers"}
-
-MACRO {ieeetcad}
- {"IEEE Transactions on Computer-Aided Design of Integrated Circuits"}
-
-MACRO {ipl} {"Information Processing Letters"}
-
-MACRO {jacm} {"Journal of the ACM"}
-
-MACRO {jcss} {"Journal of Computer and System Sciences"}
-
-MACRO {scp} {"Science of Computer Programming"}
-
-MACRO {sicomp} {"SIAM Journal on Computing"}
-
-MACRO {tocs} {"ACM Transactions on Computer Systems"}
-
-MACRO {tods} {"ACM Transactions on Database Systems"}
-
-MACRO {tog} {"ACM Transactions on Graphics"}
-
-MACRO {toms} {"ACM Transactions on Mathematical Software"}
-
-MACRO {toois} {"ACM Transactions on Office Information Systems"}
-
-MACRO {toplas} {"ACM Transactions on Programming Languages and Systems"}
-
-MACRO {tcs} {"Theoretical Computer Science"}
-
-
-% Takes 2 args (author field) and string "author"
-FUNCTION {format.names}
-{ 'bibinfo :=
-  duplicate$ empty$ 'skip$ {
-  's :=
-  "" 't :=
-  #1 'nameptr :=
-  s num.names$ 'numnames :=
-  numnames 'namesleft :=
-    { namesleft #0 > }
-    { s nameptr
-    "{vv~}{ll}{ f{}}{ jj}"
-      format.name$
-      remove.dots
-      bibinfo bibinfo.check
-      't :=
-      nameptr #1 >
-        {
-          nameptr #3
-          #1 + =
-          numnames #5
-          > and
-            { "others" 't :=
-              #1 'namesleft := }
-            'skip$
-          if$
-          namesleft #1 >
-            { ", " * t * }
-            {
-              "," *
-              s nameptr "{ll}" format.name$ duplicate$ "others" =
-                { 't := }
-                { pop$ }
-              if$
-              t "others" =
-                {
-                  " " * bbl.etal *
-                }
-                { " " * t * }
-              if$
-            }
-          if$
-        }
-        't
-      if$
-      nameptr #1 + 'nameptr :=
-      namesleft #1 - 'namesleft :=
-    }
-  while$
-  } if$
-}
-
-
-%"{f{~}~}{vv~}{ll}{ jj}"
-FUNCTION {format.names.ed}
-{
-  'bibinfo :=
-  duplicate$ empty$ 'skip$ {
-  's :=
-  "" 't :=
-  #1 'nameptr :=
-  s num.names$ 'numnames :=
-  numnames 'namesleft :=
-    { namesleft #0 > }
-    { s nameptr
-      "{vv~}{ll}{ f{}}{ jj}"
-      format.name$
-      remove.dots
-      bibinfo bibinfo.check
-      't :=
-      nameptr #1 >
-        {
-          namesleft #1 >
-            { ", " * t * }
-            {
-              "," *
-              s nameptr "{ll}" format.name$ duplicate$ "others" =
-                { 't := }
-                { pop$ }
-              if$
-              t "others" =
-                {
-
-                  " " * bbl.etal *
-                }
-                { " " * t * }
-              if$
-            }
-          if$
-        }
-        't
-      if$
-      nameptr #1 + 'nameptr :=
-      namesleft #1 - 'namesleft :=
-    }
-  while$
-  } if$
-}
-FUNCTION {format.authors}
-{ author "author" format.names
-}
-FUNCTION {get.bbl.editor}
-{ editor num.names$ #1 > 'bbl.editors 'bbl.editor if$ }
-
-FUNCTION {format.editors}
-{ editor "editor" format.names duplicate$ empty$ 'skip$
-    {
-      " " * get.bbl.editor *
-%%       "," * " " * get.bbl.editor *
-    }
-  if$
-}
-FUNCTION {format.note}
-{ 
-  % url empty$
-  %   'skip$
-  %   { 
-  %       "\urlprefix\url{[" url * "]}" * output }
-  % if$
-   note empty$
-     { "" }
-     {  
-      note "l" change.case$ "in press" = 
-        { after.sentence 'output.state :=
-          " in press" }
-        {
-          after.sentence 'output.state :=
-          note #1 #1 substring$
-          duplicate$ "{" =
-            'skip$
-            { output.state mid.sentence =
-                { "l" }
-                { "u" }
-              if$
-              change.case$ % leave note * As Is *
-            }
-          if$ 
-          note #2 global.max$ substring$ * "note" bibinfo.check
-          "[" swap$ * "]" *
-        }
-      if$
-    }
-  if$
-}
-
-FUNCTION {bold.format.title}
-{ title
-  "title" bibinfo.check
-  duplicate$ empty$ 'skip$
-    {
-      bold
-    }
-  if$
-}
-
-FUNCTION {emph.format.title}
-{ title
-  "title" bibinfo.check
-  duplicate$ empty$ 'skip$
-    {
-      emphasize
-    }
-  if$
-}
-
-% Returns ""
-FUNCTION {output.bibitem}
-{ newline$
-  "\bibitem{" write$
-  cite$ write$
-  "}" write$
-  newline$
-  ""
-  before.all 'output.state :=
-}
-
-FUNCTION {output.allinfo.comment}
-{ } 
-
-FUNCTION {n.dashify}
-{
-  't :=
-  ""
-    { t empty$ not }
-    { t #1 #1 substring$ "-" =
-        { t #1 #2 substring$ "--" = not
-            { "--" *
-              t #2 global.max$ substring$ 't :=
-            }
-            {   { t #1 #1 substring$ "-" = }
-                { "-" *
-                  t #2 global.max$ substring$ 't :=
-                }
-              while$
-            }
-          if$
-        }
-        { t #1 #1 substring$ *
-          t #2 global.max$ substring$ 't :=
-        }
-      if$
-    }
-  while$
-}
-
-FUNCTION {word.in}
-{ bbl.in capitalize
-  " " * }
-
-FUNCTION {format.date}
-{
-  before.all 'output.state :=
-  ""
-  duplicate$ empty$
-  year  "year"  bibinfo.check duplicate$ empty$
-    { swap$ 'skip$
-        { "there's a month but no year in " cite$ * warning$ }
-      if$
-      *
-    }
-    { swap$ 'skip$
-        {
-          swap$
-          " " * swap$
-        }
-      if$
-      *
-      remove.dots
-    }
-  if$
-
-  duplicate$ "" =
-    'skip$
-    { " " swap$ * }
-  if$
-}
-
-% Source = book, conference, journal, manual 
-% have the source avaliable on the stack
-FUNCTION {format.source}
-{ 'source := 
-  source "source" bibinfo.check
-  duplicate$ empty$ 'skip$
-    {
-      emphasize
-    }
-  if$
-}
-
-FUNCTION {format.title}
-{ title "title" bibinfo.check
-  duplicate$ empty$ 'skip$
-    {
-      bold
-    }
-  if$
-}
-
-
-
-FUNCTION {either.or.check}
-{ empty$
-    'pop$
-    { "can't use both " swap$ * " fields in " * cite$ * warning$ }
-  if$
-}
-FUNCTION {format.bvolume}
-{ volume empty$
-    { "" }
-    { bbl.volume volume tie.or.space.prefix
-      "volume" bibinfo.check * *
-      series "series" bibinfo.check
-      duplicate$ empty$ 'pop$
-        { swap$ bbl.of space.word * swap$
-          emphasize * }
-      if$
-      emphasize
-	  "volume and number" number either.or.check
-    }
-  if$
-}
-FUNCTION {format.number.series}
-{ volume empty$
-    { number empty$
-        { series field.or.null }
-        { series empty$
-            { number "number" bibinfo.check }
-        { output.state mid.sentence =
-            { bbl.number }
-            { bbl.number capitalize }
-          if$
-          number tie.or.space.prefix "number" bibinfo.check * *
-          bbl.in space.word *
-          series "series" bibinfo.check *
-        }
-      if$
-    }
-      if$
-    }
-    { "" }
-  if$
-}
-
-FUNCTION {format.edition}
-{ edition duplicate$ empty$ 'skip$
-    {
-      output.state mid.sentence =
-        { "l" }
-        { "t" }
-      if$ change.case$
-      "edition" bibinfo.check
-      " " * bbl.edition *
-    }
-  if$
-}
-FUNCTION {multi.page.check}
-{ 't :=
-  #0 'multiresult :=
-    { multiresult not
-      t empty$ not
-      and
-    }
-    { t #1 #1 substring$
-      duplicate$ "-" =
-      swap$ duplicate$ "," =
-      swap$ "+" =
-      or or
-        { #1 'multiresult := }
-        { t #2 global.max$ substring$ 't := }
-      if$
-    }
-  while$
-  multiresult
-}
-
-FUNCTION {format.pages}
-{ pages duplicate$ empty$ 'skip$
-    { duplicate$ multi.page.check
-        {
-          n.dashify
-        }
-        {
-        }
-      if$
-      "pages" bibinfo.check
-      ":" swap$ *
-    }
-  if$
-}
-
-FUNCTION {format.journal.pages}
-{ pages duplicate$ empty$ 'pop$
-    { swap$ duplicate$ empty$
-        { pop$ pop$ format.pages }
-        {
-          ":" *
-          swap$
-          n.dashify
-          "pages" bibinfo.check
-          *
-        }
-      if$
-    }
-  if$
-}
-FUNCTION {format.journal.eid}
-{ eid "eid" bibinfo.check
-  duplicate$ empty$ 'pop$
-    { swap$ duplicate$ empty$ 'skip$
-      {
-          ":" *
-      }
-      if$
-      swap$ *
-    }
-  if$
-}
-
-% ignore issue (num) if == 1
-FUNCTION {format.vol.num.pages}
-{ volume field.or.null
-  duplicate$ empty$ 'skip$
-    {
-      "volume" bibinfo.check bold
-    }
-  if$
-  number "number" bibinfo.check duplicate$ empty$ 'skip$
-    {
-      duplicate$ "1" = 
-         {pop$ ""}
-         { swap$ duplicate$ empty$
-               { "there's a number but no volume in " cite$ * warning$ }
-               'skip$
-            if$
-            swap$
-            "(" swap$ * ")" * 
-         }
-      if$
-    }
-  if$ *
-  eid empty$
-    { format.journal.pages }
-    { format.journal.eid }
-  if$
-}
-
-FUNCTION {format.chapter.pages}
-{ chapter empty$
-    'format.pages
-    { type empty$
-        { bbl.chapter }
-        { type "l" change.case$
-          "type" bibinfo.check
-        }
-      if$
-      chapter tie.or.space.prefix
-      "chapter" bibinfo.check
-      * *
-      pages empty$
-        'skip$
-        { ", " * format.pages * }
-      if$
-    }
-  if$
-}
-
-
-
-%% FUNCTION {format.in.ed.booktitle}
-%% { booktitle format.source duplicate$ empty$ 'skip$
-%%     {
-%%       editor "editor" format.names.ed duplicate$ empty$ 'pop$
-%%         {
-%%           bbl.edby
-%%           " " * swap$ *
-%%           swap$
-%%           "," *
-%%           " " * swap$
-%%           * }
-%%       if$
-%%       word.in swap$ *
-%%     }
-%%   if$
-%% }
-
-FUNCTION{format.edited.by}
-{ editor "editor" format.names.ed duplicate$ empty$ 
-  'pop$
-  {  bbl.edby
-     " " * swap$ *
-     swap$
-     ". " *
-     swap$
-     * }
-  if$
-}
-
-FUNCTION {format.in.booktitle}
-{ booktitle format.source duplicate$ empty$ 
-    'skip$
-    { word.in swap$ * }
-  if$
-}
-FUNCTION {format.in.journal}
-{ journal format.source duplicate$ empty$ 
-    'skip$
-    { word.in swap$ * }
-  if$
-}
-FUNCTION {empty.misc.check}
-{ author empty$ title empty$ howpublished empty$
-  month empty$ year empty$ note empty$
-  and and and and and
-    { "all relevant fields are empty in " cite$ * warning$ }
-    'skip$
-  if$
-}
-FUNCTION {format.tr.number}
-{ number "number" bibinfo.check
-  type duplicate$ empty$
-    { pop$ bbl.techrep }
-    'skip$
-  if$
-  "type" bibinfo.check
-  swap$ duplicate$ empty$
-    { pop$ "t" change.case$ }
-    { tie.or.space.prefix * * }
-  if$
-}
-FUNCTION {format.article.crossref}
-{
-  key duplicate$ empty$
-    { pop$
-      journal duplicate$ empty$
-        { "need key or journal for " cite$ * " to crossref " * crossref * warning$ }
-        { "journal" bibinfo.check emphasize word.in swap$ * }
-      if$
-    }
-    { word.in swap$ * " " *}
-  if$
-  " \cite{" * crossref * "}" *
-}
-FUNCTION {format.crossref.editor}
-{ editor #1 "{vv~}{ll}" format.name$
-  "editor" bibinfo.check
-  editor num.names$ duplicate$
-  #2 >
-    { pop$
-      "editor" bibinfo.check
-      " " * bbl.etal
-      *
-    }
-    { #2 <
-        'skip$
-        { editor #2 "{ff }{vv }{ll}{ jj}" format.name$ "others" =
-            {
-              "editor" bibinfo.check
-              " " * bbl.etal
-              *
-            }
-            {
-             bbl.and space.word
-              * editor #2 "{vv~}{ll}" format.name$
-              "editor" bibinfo.check
-              *
-            }
-          if$
-        }
-      if$
-    }
-  if$
-}
-FUNCTION {format.book.crossref}
-{ volume duplicate$ empty$
-    { "empty volume in " cite$ * "'s crossref of " * crossref * warning$
-      pop$ word.in
-    }
-    { bbl.volume
-      capitalize
-      swap$ tie.or.space.prefix "volume" bibinfo.check * * bbl.of space.word *
-    }
-  if$
-  editor empty$
-  editor field.or.null author field.or.null =
-  or
-    { key empty$
-        { series empty$
-            { "need editor, key, or series for " cite$ * " to crossref " *
-              crossref * warning$
-              "" *
-            }
-            { series emphasize * }
-          if$
-        }
-        { key * }
-      if$
-    }
-    { format.crossref.editor * }
-  if$
-  " \cite{" * crossref * "}" *
-}
-FUNCTION {format.incoll.inproc.crossref}
-{
-  editor empty$
-  editor field.or.null author field.or.null =
-  or
-    { key empty$
-        { booktitle format.source duplicate$ empty$
-            { "need editor, key, or booktitle for " cite$ * " to crossref " *
-              crossref * warning$
-            }
-            { word.in swap$ * }
-          if$
-        }
-        { word.in key * " " *}
-      if$
-    }
-    { word.in format.crossref.editor * " " *}
-  if$
-  " \cite{" * crossref * "}" *
-}
-
-% Takes 1 arg (publisher or organisation}
-%   if present appends address to the front. ie New York: Sachai Ltd
-% returns the formatted string.
-FUNCTION {format.org.or.pub}
-{ 't :=
-  t empty$
-    {   address empty$ 
-            'skip$
-            { address "address" bibinfo.check 't := }
-        if$ }
-    {   address empty$
-            'skip$
-            { address "address" bibinfo.check ": " * t * 't :=}
-        if$
-    }
-  if$
-  t
-}
-
-FUNCTION {format.publisher.address}
-{ publisher "publisher" bibinfo.warn format.org.or.pub
-}
-
-FUNCTION {format.organization.address}
-{ organization "organization" bibinfo.check format.org.or.pub
-}
-
-FUNCTION {article}
-{ output.bibitem
-  author empty$
-    { format.editors "author or editor" output.check
-      add.colon
-    }
-    { format.authors output.nonnull
-      add.colon
-      crossref missing$
-        { "author and editor" editor either.or.check }
-        'skip$
-      if$
-    }
-  if$
-  bold.format.title "title" output.check
-  new.sentence
-  crossref missing$
-    {
-      journal "journal" bibinfo.check
-      format.source "journal" output.check
-      format.date "year" output.check
-      format.vol.num.pages output
-    }
-    { format.article.crossref output.nonnull
-      format.pages output
-    }
-  if$
-  format.note output
-  fin.entry
-}
-FUNCTION {wholejournal}
-{ output.bibitem
-  author empty$
-    { format.editors "author or editor" output.check
-      add.colon
-    }
-    { format.authors output.nonnull
-      add.colon
-      crossref missing$
-        { "author and editor" editor either.or.check }
-        'skip$
-      if$
-    }
-  if$
-  bold.format.title "title" output.check
-  new.sentence
-  crossref missing$
-    {
-      journal emphasize word.in swap$ * "journal" output.check
-      format.date "year" output.check
-      format.vol.num.pages output
-    }
-    { format.article.crossref output.nonnull
-      format.pages output
-    }
-  if$
-  format.note output
-	  fin.entry
-}
-FUNCTION {book}
-{ output.bibitem
-  author empty$
-    { format.editors "author and editor" output.check
-      add.colon
-    }
-    { format.authors output.nonnull
-      add.colon
-      crossref missing$
-        { "author and editor" editor either.or.check }
-        'skip$
-      if$
-    }
-  if$
-  title format.source "source" output.check
-  crossref missing$
-    { format.bvolume output
-      new.sentence
-      format.number.series output
-      format.publisher.address output
-    }
-    {
-      new.sentence
-      format.book.crossref output.nonnull
-    }
-  if$
-  format.edition output
-  format.date "year" output.check
-  format.note output
-  fin.entry
-}
-
-FUNCTION {inbook}
-{ output.bibitem
-  author empty$
-    { format.editors "author and editor" output.check
-      add.colon
-    }
-    { format.authors output.nonnull
-      add.colon
-      crossref missing$
-        { "author and editor" editor either.or.check }
-        'skip$
-      if$
-    }
-  if$
-  title format.source "title" output.check
-  crossref missing$
-    {
-      format.publisher.address output
-      format.bvolume output
-      new.sentence
-      format.number.series output
-    }
-    {
-      new.sentence
-      format.book.crossref output.nonnull
-    }
-  if$
-  format.edition output
-  format.date "year" output.check
-  add.blank
-  format.chapter.pages "chapter and/or pages" output.check
-  format.note output
-  fin.entry
-}
-
-% In <source> . Volume X. y edition. Edited by <ed>. 
-% Add: Pub; date:pages.
-FUNCTION {incollection}
-{ output.bibitem
-  format.authors "author" output.check
-  add.colon
-  bold.format.title "title" output.check
-  new.sentence
-  crossref missing$
-  {   format.in.booktitle "booktitle" output.check
-      %format.in.ed.booktitle "booktitle" output.check
-      format.bvolume output
-      format.number.series output
-      format.edition output
-      booktitle empty$ 
-        'skip$
-        {format.edited.by}
-      if$
-      format.publisher.address output
-    }
-    { format.incoll.inproc.crossref output.nonnull
-    }
-  if$
-  format.date "year" output.check
-  before.all 'output.state := %no space,comma,etc.. -> 1991:23
-  format.pages output
-  format.note output
-  fin.entry
-}
-
-
-FUNCTION {inproceedings}
-{ output.bibitem
-  format.authors "author" output.check
-  add.colon
-  bold.format.title "title" output.check
-  new.sentence
-  crossref missing$
-  % In <source> . Volume X. x nd edition. Edited by <ed>. 
-    { format.in.booktitle "booktitle" output.check
-      format.bvolume output
-      format.edition output
-      format.number.series output
-      booktitle missing$ 
-        'skip$ 
-        { booktitle missing$ 
-            'skip$
-            {format.edited.by}
-          if$
-        }
-      if$
-      publisher missing$
-        { format.organization.address output }
-        { organization "organization" bibinfo.check output
-          format.publisher.address output
-        }
-      if$
-    }
-    { format.incoll.inproc.crossref output.nonnull
-    }
-  if$
-  format.date "year" output.check
-  before.all 'output.state := %no space,comma,etc..
-  format.pages output
-  format.note output
-  fin.entry
-}
-
-FUNCTION {conference} {inproceedings}
-
-
-FUNCTION {mastersthesis}
-{ output.bibitem
-  format.authors "author" output.check
-  add.colon
-  bold.format.title
-  "title" output.check
-  new.sentence
-  bbl.mthesis format.thesis.type format.source output.nonnull
-  school "school" bibinfo.warn output
-  address "address" bibinfo.check output
-  format.date "year" output.check
-  format.note output
-  fin.entry
-}
-
-% old manual style syntax
-% all optional:  (author, title, howpublished, month, year, note)
-% maybe missing: (organization, address, edition)
-FUNCTION {misc}
-{ output.bibitem
-  author empty$
-    { organization missing$ 'skip$
-      { organization output }
-    if$
-    }
-    { format.authors output }
-  if$  
-  add.colon
-  bold.format.title output
-  new.sentence
-  howpublished "howpublished" bibinfo.check format.source output
-  new.sentence
-  edition missing$ 'skip$
-    {edition output}
-  if$
-  author empty$
-    'skip$
-    { organization missing$ 
-        'skip$
-        {organization output}
-      if$
-    }
-  if$
-  address missing$ 'skip$
-    {address output}
-  if$
-  format.date output
-  format.note output
-  fin.entry
-  empty.misc.check
-}
-
-FUNCTION {webpage}
-{ output.bibitem
-  author empty$
-    { organization missing$ 'skip$
-      { organization output }
-    if$
-    }
-    { format.authors output }
-  if$  
-  add.colon
-  bold.format.title " " * output
-  new.sentence
-  howpublished "howpublished" bibinfo.check format.source output
-  new.sentence
-  edition missing$ 'skip$
-    {edition output}
-  if$
-  author empty$
-    'skip$
-    { organization missing$ 
-        'skip$
-        {organization output}
-      if$
-    }
-  if$
-  address missing$ 'skip$
-    {address output}
-  if$
-  format.date output
-  format.note output
-  fin.entry
-  empty.misc.check
-}
-
-
-FUNCTION {inpress}
-{ output.bibitem
-  author empty$
-    { organization missing$ 'skip$
-      { organization output }
-    if$
-    }
-    { format.authors output }
-  if$  
-  add.colon
-  bold.format.title output
-  new.sentence
-  journal emphasize output
-  "in press" output
-  fin.entry
-  empty.misc.check
-}
-
-
-
-FUNCTION {manual}
-{ output.bibitem
-  author empty$
-    { organization missing$ 'skip$
-      { organization output }
-    if$
-    }
-    { format.authors output }
-  if$  
-  add.colon
-  title output
-  emphasize
-  new.sentence
-  howpublished "howpublished" bibinfo.check format.source output
-  new.sentence
-  edition missing$ 'skip$
-    {edition output}
-  if$
-  author empty$
-    'skip$
-    { organization missing$ 
-        'skip$
-        {organization output}
-      if$
-    }
-  if$
-  address missing$ 'skip$
-    {address output}
-  if$
-  format.date output
-  format.note output
-  fin.entry
-  empty.misc.check
-}
-
-FUNCTION {booklet}{misc}
-
-
-FUNCTION {phdthesis}
-{ output.bibitem
-  format.authors "author" output.check
-  add.colon
-  bold.format.title
-  "title" output.check
-  new.sentence
-  bbl.phdthesis format.thesis.type format.source output.nonnull
-  school "school" bibinfo.warn output
-  address "address" bibinfo.check output
-  format.date "year" output.check
-  format.note output
-  fin.entry
-}
-
-FUNCTION {proceedings}
-{ output.bibitem
-  editor empty$
-    { organization "organization" bibinfo.check output
-    }
-    { format.editors output.nonnull }
-  if$
-  add.colon
-  title format.source "source" output.check
-  format.bvolume output
-  format.number.series output
-  editor empty$
-    { publisher empty$
-        'skip$
-        {
-          format.publisher.address output
-        }
-      if$
-    }
-    { publisher empty$
-        {
-          format.organization.address output }
-        {
-          organization "organization" bibinfo.check output
-          format.publisher.address output
-        }
-      if$
-     }
-  if$
-  format.date "year" output.check
-  format.note output
-  fin.entry
-}
-
-FUNCTION {techreport}
-{ output.bibitem
-  format.authors "author" output.check
-  add.colon
-  bold.format.title
-  "title" output.check
-  new.sentence
-  format.tr.number output.nonnull
-  institution "institution" bibinfo.warn output
-  address "address" bibinfo.check output
-  format.date "year" output.check
-  format.note output
-  fin.entry
-}
-
-FUNCTION {unpublished}
-{ output.bibitem
-  format.authors "author" output.check
-  add.colon
-  bold.format.title "title" output.check
-  format.date output
-  format.note "note" output.check
-  fin.entry
-}
-
-FUNCTION {default.type} { misc }
-
-
-
-%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%% %%  %%%%  %%%   %%%%%%%    %% %%%%%%%%%
-%% %%%% %%  %%%% %  %%%%%  %  %% %%%%%%%%%
-%% %%%%%   %%%%% %%  %%%  %%  %% %%%%%%%%%
-%% %%%%%% %%%%%% %%%  %  %%%  %% %%%%%%%%%
-%% %%%%%   %%%%% %%%%   %%%%  %% %%%%%%%%%
-%% %%%% %%  %%%% %%%%%%%%%%%  %% %%%%%%%%%
-%% %%  %%%%  %%% %%%%%%%%%%%  %%        %%
-%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-%%  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
- %  
- % Function for printing out all data in xml format. 
- % { address archive author booktitle chapter edition editor 
- %   howpublished institution journal key month note number
- %   organization pages publisher school series title
- %   type url volume year 
- % }
- %
-%%  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-
-
-%%
- % output.xml
- %
-%%
-FUNCTION {output.xml}
-{ duplicate$ "" = 
-   'pop$
-   { "  " swap$ * write$ newline$ }
- if$
-}
-
-%%
- % markup.xml
- %
- % Takes 2 args text & tag {"the text " "tag"}
- % Returns 1 string        {"<tag>the text <\tag>"} 
-%%
-FUNCTION {markup.xml}
-{ 
-  "" 'r :=  % result
-  't :=  % tag
-  duplicate$ missing$
-    'pop$
-    { 'r := }
-  if$
-  r "" = 
-    'skip$
-    { "<" t * ">" * r * "</" * t * ">" * 'r := }
- if$
- r
-}
-
-%% Takes 2 args - tag, string
-FUNCTION{markup.xml.title}
-{   pop$ % tag
-    duplicate$ missing$
-      'pop$
-      {
-       's := % string
-        s "\&" "&amp" replace 's := 
-        s "p" markup.xml 's :=
-        s "title" markup.xml output.xml
-      } 
-    if$
-}
-
-
-%%
- % markup.xml.pages
- %
- % Takes 1 arg (pages string)
- % seperates into <fpage> and <lpage> if 
- %    there is a - seperator. else no lpage.
- %
- % need to remove others
-%%
-FUNCTION{markup.xml.pages}
-{
-  "" 'r := % fpage
-  "" 's := % lpage
-  duplicate$ missing$
-    'pop$
-    {   
-        't :=
-        t " " "" replace 't :=  % remove all spaces. pgs must be - seperated
-        { t empty$ not }
-        {  
-              t #1 #1 substring$ "-" = 
-              { 
-                t #2 global.max$ substring$ 's := 
-                "" 't :=  % break while loop
-              }{ 
-                r t #1 #1 substring$ * 'r := 
-                t #2 global.max$ substring$ 't := 
-              }
-              if$
-        }
-        while$
-    }
-    if$
-  r "fpage" markup.xml output.xml
-  s "lpage" markup.xml output.xml
-}
-
-
-%%
- % markup.xml.names
- %
- % Takes 2 args
- % tag, namefield (eg. author "au")
- % splits fields into <fnm> and <snm>
- % writes info 
- % returns nothing
-%% 
-FUNCTION {markup.xml.names}
-{
-  't :=  % tag
-  "" 'r :=
-  "" 's :=
-  duplicate$ empty$
-    { pop$
-      organization missing$  
-        { institution "cnm" markup.xml 
-          "au" markup.xml "aug" markup.xml output.xml  }
-        { organization "cnm" markup.xml 
-          "au" markup.xml "aug" markup.xml output.xml  }
-      if$ }
-    {
-      "  <aug>" write$ newline$
-      'names :=               % names string
-      names num.names$ 'j :=  % num of names
-      #1 'i :=            % init counter
-      { i #1 j + < }     % while (i <= j)
-      {
-        "    <au>" write$
-
-        % Initial first names
-        % if first name all in capitals 
-        %  - assume is initial list of first names.
-        names i "{ff{ }}" format.name$
-          duplicate$ "u" change.case$ = 
-          { names i "{ff{ }}" format.name$ }
-          { names i "{f{}}" format.name$ }
-          if$
-        
-        % if last name but no first name use cnm; else snm
-        duplicate$ "" = 
-          { names i "{ll{ }}" format.name$ % last names space seperated. 
-            "cnm" markup.xml write$ }
-          { names i "{ll{ }}" format.name$ % last names space seperated. 
-            "snm" markup.xml write$ }
-        if$
-
-        "fnm" markup.xml write$ 
-      
-        "</au>" write$ newline$
-        i #1 + 'i :=
-      }
-      while$      
-      "  </aug>" write$ newline$
-    }
-  if$
-}
-
-
-%%
- % markup.xml.pub
- %
- % Takes 4 args (school address publisher tag)
- % prints concatenation 
- % returns nothing
-%% 
-FUNCTION {markup.xml.pub}
-{
-  't :=    % Tag
-  "" 'p := % Publisher 
-  "" 'q := % Address
-  "" 'r := % School
-  "" 's := % Answer
-  duplicate$ missing$ 'pop$ { 'p := } if$
-  duplicate$ missing$ 'pop$ { 'q := } if$
-  duplicate$ missing$ 'pop$ { 'r := } if$
-  "" r = not     % school not empty
-    { r 's := }   % return school as publisher 
-    {             % else 
-      "" p = "" q = and % address and pub empty 
-        'skip$
-        {
-          "" q = 
-            { p 's := }         % return pub
-            { "" p =
-                { q 's := }         % return add
-                { q ": " * p * 's := }  % return add : pub
-              if$
-            }
-          if$
-        }
-      if$
-    }
-  if$
-  s t markup.xml output.xml
-}
-
-%%
- % xml.phd
- %
- % Takes nothing
- % Returns type (phd/msc) of empty string
-%%
-FUNCTION {xml.phd}
-{   
-    "phdthesis" type$ =
-    "mastersthesis" type$ = OR
-    { "phdthesis" type$ =
-        { bbl.phdthesis format.thesis.type }
-        { bbl.mthesis format.thesis.type }
-      if$
-    }
-    { type } % usually empty
-  if$ 
-}
-
-% markup.xml.edition
-%
-% edition is a numeric value. ie "2"
-% if format 2nd 1st etc.. strip letters.
-%
-FUNCTION {markup.xml.edition}
-{ pop$ pop$  %clear stack
-  edition strip.letters duplicate$ "" = 
-      { pop$ edition } 
-      'skip$ 
-  if$
-  "edition"   markup.xml  output.xml
-}
-
-
-%%  [bmc@xmlcomment]
- %   this is an environment that returns nothing 
- %   so although it will be embedded in the bbl file it
- %   will not display anything
-%%
-FUNCTION{begin.bmcxmlcomment}{
-    newline$ 
-    "\newcommand{\BMCxmlcomment}[1]{}" write$ newline$
-    newline$ 
-    "\BMCxmlcomment{" write$ newline$ 
-    newline$ "<refgrp>" write$ newline$
-}
-
-FUNCTION{end.bmcxmlcomment}{ 
-    newline$ 
-    "</refgrp>" write$ newline$
-    "} % end of \BMCxmlcomment" write$ newline$
-}
-
-%%
- % export.xml
- % 
- % done for each entry referenced in the BibTeX database 
-%%
-FUNCTION {export.xml}{ 
-  newline$
-  global.counter #1 + 'global.counter :=
-  "<bibl id=" quote$ * "B" * global.counter int.to.str$ * quote$ * ">" * 
-  write$ newline$
-%  title "\&" "&amp" replace "title" markup.xml.title     
-  title         "title"     markup.xml.title     
-  author        "aug"       markup.xml.names % org. and inst. here
-  howpublished missing$ 
-    { booktitle missing$ 
-      { journal missing$
-          { xml.phd } % <type> Phd/Msc 
-          {journal}
-        if$
-      } {booktitle}
-    if$
-    } { howpublished }
-  if$           "source"    markup.xml output.xml
-  school 
-  address  
-  publisher     "publisher" markup.xml.pub
-  editor        "editor"    markup.xml output.xml
-  edition       "edition"   markup.xml.edition     
-  series        "p"         markup.xml 
-                "title"     markup.xml 
-                "series"    markup.xml output.xml    
-  chapter       "p"         markup.xml 
-                "title"     markup.xml 
-                "section"   markup.xml output.xml    
-  % month       % ignore
-  year          "pubdate"   markup.xml output.xml    
-  
-  note missing$ 
-      { volume  "volume"    markup.xml output.xml    
-        number  "issue"     markup.xml output.xml    
-        pages               markup.xml.pages    
-        url     "url"       markup.xml output.xml }
-      { note "l" change.case$ "in press" = 
-          { "  <inpress />" write$ newline$ }
-          { volume  "volume"    markup.xml output.xml    
-            number  "issue"     markup.xml output.xml    
-            pages               markup.xml.pages    
-            url     "url"       markup.xml output.xml 
-            note    "note"      markup.xml output.xml 
-          }   
-        if$ 
-      }
-  if$
-  "</bibl>" write$ newline$
-} 
-
-% xml fields not used
-% suppliment conference xrefbib issn issb archive key
-% BioMed_Central_Tex_Template_v1.01
-
-
-%%%%%%%%%%%%%%%%
-%              %
-%     Main     %
-%              %
-%%%%%%%%%%%%%%%%
- 
-READ
-
-FUNCTION {initialize.longest.label}
-{ "" 'longest.label :=
-  #1 'number.label :=
-  #0 'longest.label.width :=
-}
-FUNCTION {longest.label.pass}
-{ number.label int.to.str$ 'label :=
-  number.label #1 + 'number.label :=
-  label width$ longest.label.width >
-    { label 'longest.label :=
-      label width$ 'longest.label.width :=
-    }
-    'skip$
-  if$
-}
-EXECUTE {initialize.longest.label}
-ITERATE {longest.label.pass}
-FUNCTION {begin.bib}
-{ "%% BioMed_Central_Bib_Style_v1.01" write$ newline$ newline$
-  preamble$ empty$
-    'skip$
-    { preamble$ write$ newline$ }
-  if$
-  "\begin{thebibliography}{"  longest.label  * "}" *
-  write$ newline$
- "\providecommand{\url}[1]{[#1]}"
-  write$ newline$
-  "\providecommand{\urlprefix}{}"
-  write$ newline$
-}
-
-EXECUTE {begin.bib}
-EXECUTE {init.state.consts}
-ITERATE {call.type$}
-FUNCTION {end.bib}
-{ newline$
-  "\end{thebibliography}" write$ newline$
-}
-EXECUTE {end.bib}
-EXECUTE {begin.bmcxmlcomment}
-ITERATE {export.xml}
-EXECUTE {end.bmcxmlcomment}
-%% End of customized bst file
-%%
-%% End of file `basic.bst'.
diff --git a/paper/bmc_article.cls b/paper/bmc_article.cls
deleted file mode 100755
index 8961541..0000000
--- a/paper/bmc_article.cls
+++ /dev/null
@@ -1,138 +0,0 @@
-%%                                           %
- %    bmc_article.cls             ver: 1.03  %
- %                                           %
- %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
- %                                          %%
- %    A Style Class based on article for    %%  
- %     formating towards BioMed Central     %%
- %               guidelines                 %%
- %                                          %%
- %           <1 September 2003>             %%
- %                                          %%
- %                                          %%
- %                                          %%
- %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
- % 
- % See Readme.txt for ToDo list.
-%%
-%
-
-\NeedsTeXFormat{LaTeX2e}[1995/12/01]
-\ProvidesClass{bmc_article}[2003/09/01 v1.01 BioMed Central article class]
-\LoadClassWithOptions{article} 
-
-\renewcommand\@biblabel[1]{#1.}
-\def\hi{}
-\def\pb{\\*[0.42cm]}
-
-
-\AtBeginDocument{}
-
-\def\@abstractline{\textwidth}
-
-\newcounter{bmc@correspondingauthor} 
-\setcounter{bmc@correspondingauthor}{0} %never changes
-\newcounter{bmc@emailcounter} \setcounter{bmc@emailcounter}{0}
-
-
-% Corresponding Authors.
-% adds an asterisk * as a marker.
-\def\correspondingauthor{$^*$}
-\def\@corresponding{\footnotesize\correspondingauthor Corresponding author} 
-
-
-% Email.
-% A variable to store names and emails.
-\gdef\bmc@email{Email: }
-\newcommand\bmc@curname{}
-\newcommand\email[1]{\relax
-    \g@addto@macro\bmc@email{#1; }} % has trailing ;
-
-\def\@bmc@email{\relax\footnotesize{\bmc@email}}  
-
-% Address
-\def\address#1{ \def\@address{\begin{hi}\footnotesize#1\end{hi}}}
-\def\iid(#1){\hi$^#1$}
-
-% Thanks
-\def\thempfootnote{\normalfont\@arabic\c@mpfootnote}
-\def\thanks#1{%
-  \stepcounter{footnote}%
-  \hbox{\@textsuperscript{\normalfont\thefootnote}}%
-    \protected@xdef\@thanks{\@thanks%
-        \protect\footnotetext[\the\c@footnote]{#1}}%
-  }
- 
-% Maketitle
-\let\old@maketitle\maketitle
-\renewcommand\maketitle{  
-   \begin{flushleft}\mbox{
-    \global\let\@date\@empty % @date = null. 
-    {\sffamily\begin{minipage}{\textwidth}%
-             \@maketitle                                           
-             {\raggedright%
-                {\noindent\@address}\\ \hbox{} 
-                {\noindent\@bmc@email}\\ \hbox{}
-                {\noindent\@corresponding}%
-             }%end \raggedright  
-      \end{minipage}%
-      }
-    \renewcommand\thefootnote{\old@thefootnote}  %
-    } % \mbox
-    \end{flushleft}
-}
-
-\def\and{, }
-
-\def\@maketitle{%
-  \newpage
-  \null
-  \vskip 2em%
-    {\noindent\LARGE \bfseries\@title \par}%
-    \vskip 1.5em%
-    {\large
-      %\lineskip .5em%
-        \noindent\@author
-      \par}%
-    \vskip 1em%
-  \par
-  \vskip 1.5em}
-
-
-% reformats abstract to BMC looks 
-\let\old@abstract\abstract 
-\renewenvironment{abstract}                  
-   {  
-      \ifhmode\begingroup\parskip0pt\par\noindent\endgroup\fi%
-      \begin{sffamily}                        
-         \vspace{1cm} % use \topsep in list
-            {\noindent\bfseries\large\abstractname\vspace{-0.5em}}
-            {\par\vbox{\hrule width \@abstractline}} 
-     }{                                      
-            \ifhmode\begingroup\parskip0pt\par\noindent\endgroup\fi % 
-            \vbox{\hrule width \@abstractline} \vspace{1cm} %
-      \end{sffamily}                         
-   }
-
-
-
-%% \@startsection{sec-name}{level}{indent}{pre-skip} 
-%%               {post-skip}{style}*[srt title]{title}
-\renewcommand\section{\@startsection {section}{1}{\z@}%
-                     {-0.84cm \@plus -1ex \@minus -.2ex} {.2ex \@plus.2ex} %%
-                     {\normalfont\large\bfseries\sffamily}}
-\renewcommand\subsection{\@startsection{subsection}{2}{\z@}%
-                     {-0.84cm \@plus -1ex \@minus -.2ex} {.2ex \@plus.2ex} %%
-                     {\normalfont\normalsize\bfseries\sffamily}}
-\renewcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}%
-                     {-0.84cm \@plus -1ex \@minus -.2ex} {.2ex \@plus.2ex} %%
-                     {\normalfont\normalsize\sffamily\itshape}}
-\renewcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
-                     {-.2em \@plus1ex \@minus.2ex} {-0.5em} %%
-                     {\normalfont\small\bfseries\sffamily}}
-\renewcommand\subparagraph{\@startsection{subparagraph}{5}{\parindent}%
-                     {-.2em \@plus1ex \@minus.2ex} {-0.5em} %%
-                     {\normalfont\normalsize\sffamily}}
-
-\endinput
-%% end of bmc_article.cls
diff --git a/paper/bmc_article.tex b/paper/bmc_article.tex
deleted file mode 100644
index 4ccea89..0000000
--- a/paper/bmc_article.tex
+++ /dev/null
@@ -1,687 +0,0 @@
-%% BioMed_Central_Tex_Template_v1.05
-%%                                      %
-%  bmc_article.tex            ver: 1.05 %
-%                                       %
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%                                     %%
-%%  LaTeX template for BioMed Central  %%
-%%     journal article submissions     %%
-%%                                     %%
-%%         <27 January 2006>           %%
-%%                                     %%
-%%                                     %%
-%% Uses:                               %%
-%% cite.sty, url.sty, bmc_article.cls  %%
-%% ifthen.sty. multicol.sty            %%
-%%                                     %%
-%%                                     %%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%                                                                 %%	
-%% For instructions on how to fill out this Tex template           %%
-%% document please refer to Readme.pdf and the instructions for    %%
-%% authors page on the biomed central website                      %%
-%% http://www.biomedcentral.com/info/authors/                      %%
-%%                                                                 %%
-%% Please do not use \input{...} to include other tex files.       %%
-%% Submit your LaTeX manuscript as one .tex document.              %%
-%%                                                                 %%
-%% All additional figures and files should be attached             %%
-%% separately and not embedded in the \TeX\ document itself.       %%
-%%                                                                 %%
-%% BioMed Central currently use the MikTex distribution of         %%
-%% TeX for Windows) of TeX and LaTeX.  This is available from      %%
-%% http://www.miktex.org                                           %%
-%%                                                                 %%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-
-\NeedsTeXFormat{LaTeX2e}[1995/12/01]
-\documentclass[10pt]{bmc_article}    
-
-
-
-% Load packages
-\usepackage{cite} % Make references as [1-4], not [1,2,3,4]
-\usepackage{url}  % Formatting web addresses  
-\usepackage{ifthen}  % Conditional 
-\usepackage{multicol}   %Columns
-\usepackage[utf8]{inputenc} %unicode support
-%\usepackage[applemac]{inputenc} %applemac support if unicode package fails
-%\usepackage[latin1]{inputenc} %UNIX support if unicode package fails
-\usepackage{siunitx}
-\usepackage{etoolbox}
-\usepackage{booktabs}
-\usepackage{xspace}
-\urlstyle{rm}
- 
- 
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%	
-%%                                             %%
-%%  If you wish to display your graphics for   %%
-%%  your own use using includegraphic or       %%
-%%  includegraphics, then comment out the      %%
-%%  following two lines of code.               %%   
-%%  NB: These line *must* be included when     %%
-%%  submitting to BMC.                         %% 
-%%  All figure files must be submitted as      %%
-%%  separate graphics through the BMC          %%
-%%  submission process, not included in the    %% 
-%%  submitted article.                         %% 
-%%                                             %%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%                     
-
-
-\def\includegraphic{}
-\def\includegraphics{}
-
-
-
-\setlength{\topmargin}{0.0cm}
-\setlength{\textheight}{21.5cm}
-\setlength{\oddsidemargin}{0cm} 
-\setlength{\textwidth}{16.5cm}
-\setlength{\columnsep}{0.6cm}
-
-\newboolean{publ}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%                                              %%
-%% You may change the following style settings  %%
-%% Should you wish to format your article       %%
-%% in a publication style for printing out and  %%
-%% sharing with colleagues, but ensure that     %%
-%% before submitting to BMC that the style is   %%
-%% returned to the Review style setting.        %%
-%%                                              %%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
- 
-
-%Review style settings
-%\newenvironment{bmcformat}{\begin{raggedright}\baselineskip20pt\sloppy\setboolean{publ}{false}}{\end{raggedright}\baselineskip20pt\sloppy}
-
-%Publication style settings
-\newenvironment{bmcformat}{\fussy\setboolean{publ}{true}}{\fussy}
-
-
-
-% Begin ...
-\begin{document}
-\begin{bmcformat}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%% Formatting macros
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\newcommand{\quorum}{QuorUM\xspace}
-\hyphenation{quor-um}
-\newcommand{\species}[1]{\textit{#1}}
-\newcommand{\cov}[1]{\ensuremath #1\textrm{x}\xspace}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%                                          %%
-%% Enter the title of your article here     %%
-%%                                          %%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\title{\quorum: an error corrector for Illumina reads}
- 
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%                                          %%
-%% Enter the authors here                   %%
-%%                                          %%
-%% Ensure \and is entered between all but   %%
-%% the last two authors. This will be       %%
-%% replaced by a comma in the final article %%
-%%                                          %%
-%% Ensure there are no trailing spaces at   %% 
-%% the ends of the lines                    %%     	
-%%                                          %%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-
-\author{Guillaume Mar\c{c}ais\correspondingauthor$^1$%
-       \email{Guillaume Mar\c{c}ais\correspondingauthor - gmarcais@umd.edu}%
-      \and
-         Aleksey Zimin\correspondingauthor$^1$%
-         \email{Aleksey Zimin\correspondingauthor- alekseyz@ipst.umd.edu}%
-       \ and
-         James A. Yorke$^1$%
-         \email{James Yorke - yorke@umd.edu}
-      }
-      
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%                                          %%
-%% Enter the authors' addresses here        %%
-%%                                          %%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\address{%
-    \iid(1)University of Maryland, College Park, MD
-}%
-
-\maketitle
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%                                          %%
-%% The Abstract begins here                 %%
-%%                                          %%
-%% The Section headings here are those for  %%
-%% a Research article submitted to a        %%
-%% BMC-Series journal.                      %%  
-%%                                          %%
-%% If your article is not of this type,     %%
-%% then refer to the Instructions for       %%
-%% authors on http://www.biomedcentral.com  %%
-%% and change the section headings          %%
-%% accordingly.                             %%   
-%%                                          %%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-
-\begin{abstract}
-  % Do not use inserted blank lines (ie \\) until main body of text.
-\paragraph*{Background:}
-Illumina Sequencing data can provide high coverage of a genome by relatively short (\SI{100}{bp} to \SI{150}{bp}) reads at a low cost.
-The base error rates in the reads vary greatly along the read sequence.
-Low quality bases can be trimmed off or error-corrected.
-Trimming, especially based on the quality scores, can eliminate large amounts of useful sequence in the reads.
-Error correction is an alternative to trimming that takes advantage of the high coverage of the genome to make the high confidence base corrections in the reads.
-Error correction allows for more effective use of the sequencing data thus reducing the coverage depth requirements in sequencing projects and increasing the quality of the resulting assemblies.
-The vast majority of errors in Illumina data are substitutions, where a base call is incorrect, and \quorum focuses on this type of error.
-The software is available under the GPL open source license at \url{ftp://ftp.genome.umd.edu/pub/quorum}.
-      
-\paragraph*{Results:}
-We propose software, called \quorum, for error correcting substitution error in Illumina reads.
-It provides accurate correction and is suitable for large data sets ($48$ billion bases corrected per hours on $48$ threads).
-
-\paragraph*{Conclusions:} 
-For each test of the three genomes, either Quake or \quorum performed best (see Table~\ref{table:left-introduced}).
-Generally, Quake leaves fewer errors at a cost of discarding more sequence.
-\quorum outputs more reads that align perfectly to the finished sequence (see Table~\ref{table:perfect-reads}).
-
-\end{abstract}
-
-
-
-\ifthenelse{\boolean{publ}}{\begin{multicols}{2}}{}
-
-
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%                                          %%
-%% The Main Body begins here                %%
-%%                                          %%
-%% The Section headings here are those for  %%
-%% a Research article submitted to a        %%
-%% BMC-Series journal.                      %%  
-%%                                          %%
-%% If your article is not of this type,     %%
-%% then refer to the instructions for       %%
-%% authors on:                              %%
-%% http://www.biomedcentral.com/info/authors%%
-%% and change the section headings          %%
-%% accordingly.                             %% 
-%%                                          %%
-%% See the Results and Discussion section   %%
-%% for details on how to create sub-sections%%
-%%                                          %%
-%% use \cite{...} to cite references        %%
-%%  \cite{koon} and                         %%
-%%  \cite{oreg,khar,zvai,xjon,schn,pond}    %%
-%%  \nocite{smith,marg,hunn,advi,koha,mouse}%%
-%%                                          %%  
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-
-
-
-%%%%%%%%%%%%%%%%
-%% Background %%
-%%
-\section*{Background}
-While second generation sequencing technologies have progressed tremendously and offer ever longer reads with low overall sequencing error rate, correcting errors in reads remains an important pre-processing step in \emph{de novo} genome assembly.
-In general, error correcting the reads leads to assemblies with longer contiguous sequences and fewer misassemblies~\cite{Salzberg2011}.
-
-For Illumina sequencing, the base quality degrades toward the 3' ends of the reads, therefore one can trim the reads either by a fixed amount or based on the quality values reported by the sequencing machine.
-Although these simple trimming schemes will reduce the number of erroneous bases, it still leaves many errors in the reads and needlessly discards a lot of valid sequence. 
-Aggressive trimming results in fragmented assemblies.
-
-On the other hand, trimming can be an integral part of error correction.
-The distribution of sequencing errors on the reads is complex and for some percentage of the reads, the sequence beyond a certain point contains too many errors to be corrected or, even worse, does not correspond to any sequence in the original genome.
-It is important to trim those reads to avoid misassemblies~\cite{Salzberg2011}.
-
-%% I still think a paragraph explaining why error correction is even
-%% possible is necessary.
-% Genomes are sequenced at some depth.
-% Meaning that every part of the genome should be present in more than one sequencing read.
-% As sequencing machines make a mistake reading a base, this error can be detected by comparing the read to others covering the same region of the genome.
-% Put another way, erroneous base should follow a different probability distribution than correct bases.
-
-There is a number of published error correctors that use different techniques to detect and correct these erroneous bases~\cite{Yang2012}.
-Coral~\cite{salmela2011correcting} and Echo~\cite{Kao2011} use multiple alignment of the reads.
-Then, a statistical model of sequencing is used to correct misaligned bases.
-HiTec~\cite{Ilie2011b} uses a suffix array to find and correct potentially erroneous bases.
-Quake~\cite{Kelley:2010fk} uses the distribution of $k$-mers, or the $k$-spectrum, to detect $k$-mers containing erroneous bases.
-The first three error correctors only attempt to make base substitutions, while the last one, Quake, will also trim reads.
-
-% We propose a new error correction procedure and software package, named \quorum (Quality Optimized Reads from the University of Maryland), that provides accurate trimming and error correction.
-\quorum (Quality Optimized Reads from the University of Maryland) uses both the $k$-spectrum and the quality scores reported by the sequencing machine.
-In addition, \quorum is flexible: it can correct reads of varying length and reads containing ambiguous base calls (Ns).
-% TODOcheck number below
-It is also fast (1 billion $\SI{100}{bases}$ long reads in a day) and can tackle the large data sets produced by today's high throughput sequencing machine.
-QuorUM only corrects substitution errors, not insertions and deletions.
-It is well suited for correcting reads sequenced using Illumina technology~\cite{Bentley2008}, where the substitutions errors are the most common.
-
-We evaluate the error correction and trimming skill of QuorUM and compare it to  other published error correctors (HiTec, Echo, Coral and Quake), on  three genomes that have Illumina reads and have genome assemblies of finished quality.
-We compare the error correctors by aligning the original reads and the error corrected reads to the finished sequence and measure the improvements.
-
-% First, we report the number of substitution errors left after error correction and the number of new errors introduced (i.e.\@ false positive rate) (Table~\ref{table:left-introduced}).
-% This measures how well the software corrects individual substitution errors.
-% %
-% Second, we measure the number of chimeric reads before and after error correction (Table~\ref{table:chimeric}).
-% % Def chimeric has been added. Is this OK?
-% A read is called chimeric if it does not match the finished genome in one piece but the read can be split into two parts that match the genome in two widely separated places.
-% This measures the likelihood  of the software to over correct by gluing sequences that do not belong together.
-% %
-% Third, we report the amount of sequence which is error free reads (i.e.\@ reads which aligns perfectly to the finished sequence) (Table~\ref{table:perfect-reads}).
-% These reads are easy for assemblers to use, and this is a measure of how well the correction and trimming work.
-% %
-% Fourth, we report the contig sizes of ``idealized contigs'' created by aligning error corrected reads to the finished sequence (Table~\ref{table:icontigs}).
-% This procedure, similar to a guided assembly, provides some estimate of the maximum contig size achievable through assembly, without the bias of using a particular assembler.
-% Finally, we will report the time and memory consumption to carry out the correction.
-
-% We use the evaluation toolkit of~\cite{Yang2012} with some modifications (see~\ref{sec:Methods}).
-
- 
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%% Results and Discussion %%
-%%
-\section*{Results and Discussion}
-
-We evaluated the error correction software by error correcting the reads of three organisms, two bacterial genomes and a mammalian genome, for which a finished sequence is available: \species{Rhodobacter sphareoides} (rhodobacter)~\cite{Mackenzie2001}, \species{Mus musculus} (mouse)~\cite{Waterston2002} and \species{Staphylococcus aureus} (staphylococcus).
-These genomes present different type of challenges for error correction.
-The \species{Rhodobacter sphaeroides} bacteria genome (\SI{4.6}{Mb} long) has a high GC content and is consequently difficult to sequence using Illumina technology.
-The mouse genome, being a mammalian genome, is larger and more complex.
-For the sake of simplicity, we only use chromosome 16 of the mouse genome which has \SI{98}{Mb} in finished sequence.
-
-We were able to successfully run all five error correctors on the bacterial data sets.  
-Echo and HiTEC failed on the larger mouse data.
-In addition, we implemented two simple programs that only trim the input reads.
-trim20B trims $20$ bases off the 3' end of the reads, while trimQual5 trims the 3' end of a read at a base where the quality goes below or equal to $5$ and subsequently never goes above $5$.
-When applicable, we also compare the results to doing no correction at all, mentioned in the result tables as the ``none'' corrector.
-
-A corrector can foul some of the reported metrics by very aggressively trimming the reads.
-At the extreme, a corrector can trim every read to one base and, as a result, obtain only perfect reads.
-More realistically, there is a trade-off between trimming off the hard to correct regions of the reads and attempting to correct these regions; a trade-off between the amount of sequence in the corrected reads and the quality of the sequence.
-*As seen in Table~\ref{table:perfect-reads} and~\ref{table:left-introduced}, \quorum achieves a balance between aggressive trimming and accurate correction.
-
-Table~\ref{table:perfect-reads} reports the number of reads and the total sequence in perfect corrected reads;
-i.e.\@ corrected reads which have a full length error free alignment with the finished sequence.
-\quorum consistently produces the largest number of perfect reads and the largest amount of sequence in perfect reads.
-Although \quorum trims and discards some reads (see Table~\ref{table:left-introduced}), the amount of perfect sequence is larger than that produced by the correctors that do not trim or discard any reads, such as Echo, HiTEC and Coral.
-Moreover, \quorum trims less aggressively than Quake while still producing a higher percentage of perfect reads.
-
-We call a read \emph{chimeric} when it merges together sequences from two or more distant regions of the genome.
-Such reads typically cannot be corrected, they have to be trimmed or discarded.
-The Illumina technology generates few chimeric reads (usually less than $1\%$ of all the reads).
-When doing very aggressive error correction, one runs the risk of creating new chimeric reads;
-i.e.\@ sequence from a distant, possibly repeated, region of the genome is used to rewrite significant portion of a read.
-Table~\ref{table:chimeric} shows that Quake and \quorum decrease significantly the number of chimeric reads.
-HiTEC actually  increases the number of chimeric reads while Echo and Coral make only small decreases in chimeric reads.
-
-For Table~\ref{table:left-introduced}, we record the sequencing errors in the reads by comparing the sequence of a reads to its best alignment against the finished sequence.
-After error correction, we record which errors where corrected or not.
-Although in practice error correction and trimming are done concurrently, Table~\ref{table:left-introduced} shows the results as if these two operations are done one after the other.
-The second column shows the proportion of errors that are within the trim region and the third column shows proportion of these errors which are not corrected.
-The fourth column shows the proportion of errors which are introduced by the correction routine (the False Positive rate).
-The last column is the proportion of the errors left after trimming and correction over the total number of errors.
-
-Quake leaves the fewest errors in the reads ($C_5$) but at the expense of very aggressive trimming (over $40\%$ of the reads on the bacterial genomes, see $C_1$).
-\quorum discards a lot less sequence ($C_1$) while output reads with few errors ($C_5$).
-Coral, Echo and HiTEC do not trim and are not very aggressive in the correction ($C_3$), hence the corrected reads still contain many errors.
-
-%%%%%%%%%%%%%%%%%%%%%%
-\section*{Conclusions}
-Our goal in creating an error corrector is to aid in assembly of whole genome shotgun reads.
-The results we produce are aimed at a partial evaluation of that goal.
-Coral, Echo and HiTEC correct errors without trimming the reads, but some reads have so many errors at the 3' end that the reads cannot be corrected effectively.
-These three correctors leave more errors than either Quake or \quorum (see column $C_5$ of Table~\ref{table:left-introduced}).
-If an assembly project generates sufficiently deep coverage (e.g.\@ \cov{100}), then Quake's tendency to discard sequence (up to $42\%$ in our study) may not be a handicap.
-Whether Quake or \quorum assists an assembly program to produce a better assembly may depend upon the particular assembly program, the depth of coverage and the idiosyncrasies of the genome being assembled.
-
-  
-%%%%%%%%%%%%%%%%%%
-\section*{Methods}
-\label{sec:Methods}
-
-\subsection*{Correcting bases}
-\label{sec:meth-error-correction}
-
-% \quorum error corrects reads by replacing low quality $k$-mers in the input reads with high quality $k$-mers.
-% The quality of a $k$-mer is based first on the quality values reported by the sequencing machine of the bases in the mer and second by its number of occurrences in the reads.
-
-% \quorum uses the Jellyfish~\cite{Marcais2011} software to count the number of occurrences of the $k$-mers in the input reads.
-% First it counts the occurrences of all $k$-mers and second it counts the occurrences $k$-mers in which all bases have a quality value greater than a threshold (by default $5$ above the minimum quality). We call the latter $k$-mers ``high quality''.
-% Then, every read is examined in turn.
-% \quorum searches for an \emph{anchor} $k$-mer: a $k$-mer whose number of occurrences is higher than a threshold $a$ ($a = 3$ by default). 
-% Starting from this anchor, \quorum will look at every base, extending toward the 5' and 3' ends, and decide to make a correction based on the $k$-mer ending at that base.
-% Let $m = xb$ bet the $k$-mer, where $|m| = k$, $x$ is a prefix with $|x| = k - 1$, and $b$ is the base under consideration.
-% If $m$ has a number of occurrences greater than $a$, then no correction is made.
-% Otherwise, the 3 possible alternatives $b'$ are considered.
-% \quorum considers in priority the $k$-mers $m' = xb'$ in the high-quality set.
-% Only if all $m'$ have count 0 in the high-quality set is the set containing all $k$-mers considered.
-% \quorum substitutes base $b$ by $b'$ if only one of the alternative has a occurrence count at least 3 times that of $m$.
-% Moreover, \quorum checks that this substitution is not a dead-end.
-% I.e.\@ that at least one the of four extensions of $m'$ is present in the input reads, where the extensions of $m'$ are the four possible $k$-suffixes of $m'b''$ and $b''$ is a base.
-
-% {\bf Correcting a base in a read.}
-We designed QuorUM algorithm to produce error corrected reads that are most useful for de novo assembly and mapping.
-We based our algorithm on the following observations.
-First, the base quality is the best at the 5' end, and it degrades towards the 3' end of the reads.
-Second, the read coverage is not uniform, there are biases, for example due to CG content of the sequencing fragments and other reasons.
-Therefore the low $k$-mer counts are not always indicative of errors in those $k$-mers.
-We classify $k$-mers in the reads based on their max-min quality as follows.
-For any $k$-mer $m$, i.e. a given string of $k$ bases, an instance of $m$ (call it $m_i$) is the occurrence of the sequence of $m$ in a read, associated with $k$ quality scores.
-The max-min quality of $m$ is the maximum over all instances $m_i$ of $m$ of the minimum of the quality scores of $m_i$.
-If the max-min quality is above a certain threshold $q$, we call the $k$-mer reliable.
-In other words, a $k$-mer is reliable if there exists at least one instance of $m$ where all bases have a quality score of at least $q$.
-
-\quorum error corrects reads by replacing low quality $k$-mers in the input reads with high quality $k$-mers.
-It uses Jellyfish~\cite{Marcais2011} to create a database of the reliable $k$-mers and all $k$-mers.
-\quorum first look for an \emph{anchor}: a group of reliable $k$-mers with counts above a threshold close to the 5' end of the reads.
-The size of the group and the count threshold ($a$) are parameters to \quorum.
-Starting from this anchor, \quorum will look at every base, extending in turn toward the 5' and 3' ends.
-Here we consider extension toward the 3' end and leave the reverse to the reader.
-As \quorum shifts the $k$-mer toward the 3' end one base at a time, it and decides whether to make a correction based on the $k$-mer ending at that base.
-Let $m = xb$ be the anchor $k$-mer, where the length $|m| = k$, and $x$ is a prefix with length $|x| = k - 1$, and $b$ is the base under consideration.
-If $m$ has a number of occurrences greater than $a$ in the entire database, then no correction is made; otherwise, the 3 possible alternative bases $b'$ are considered.
-\quorum determines if any of the three $k$-mers $m' = xb'$ are in the high-quality set.
-Only if all three $m'$ have count 0 in the high-quality set is the set containing all $k$-mers considered.
-\quorum substitutes base $b'$ for $b$ if only one of the alternative $xb'$ considered has an occurrence count at least 3 times that of $m$.
-Moreover, \quorum checks that this substitution is not a dead-end; i.e.\@ at least one the of four extensions of $m'$ is present in the input reads, where the extensions of $m'$ are the four possible $k$-suffixes of $m'b''$ and $b''$ is a base.
-If there were two base errors in a row, \quorum would be very unlikely to make a change. 
-
-\subsection*{Trimming}
-\label{sec:meth-trimming}
-The maximum number of corrections made in a window of length $10$ is by default capped at $3$.
-\quorum will trim the read at the beginning of the window if the number of errors is higher.
-
-% These options were not used in the work on this paper. Yes or No???
-% The first option was not used. The second one was the Rhodobacter data.
-In addition, \quorum has two extra optional procedure for trimming reads. 
-It takes as input a set of contaminant $k$-mers and it will trim a read wherever it contains such a contaminant mer.
-
-Also, in high or low GC genome, the Illumina sequencers tend to erroneously generate long homo-polymer run toward the 3' end of the reads.
-\quorum can optionally detect and trim off these homo-polymer.
-
-
-\subsection*{Evaluation}
-
-The reads for \species{S. aureus} have accessions SRR022868.
-The finished sequence is version USA300\_TCH1516.
-The genome is $\SI{2.9}{Mb}$ in length.
-There are $5\,176\,416$ reads of length $\SI{101}{bases}$, for a coverage of $\cov{180}$.
-
-The reads for \species{R. sphaeroides} have accessions SRR081522.
-The finished sequence is version 2.4.1.
-The genome is $\SI{4.6}{Mb}$ in length.
-There are  reads of length $\SI{101}{bases}$, for a coverage of $\cov{43}$.
-
-The reads for the \species{M. musculus} have accessions SRR067634, SRR067650, SRR067648, SRR067622, SRR067649, SRR067641, SRR067670, SRR067636, SRR067612, SRR067616, SRR067615, SRR067623, SRR067605, SRR067646, SRR067633, SRR067620, SRR067606, SRR067611, SRR067625, SRR067601, SRR067624, SRR067645, SRR067635, SRR067653, SRR067607, SRR067669, SRR067603, SRR067660, SRR067619, SRR067658, SRR067604, SRR067631, SRR067639, SRR067657, SRR067610, SRR067654, SRR067644, SRR067618, SRR067652, SRR067663, SRR067823, SRR067839, SRR067846, SRR067858, and SRR067830.
-The finished sequence is UCSC's mm10 build.
-For this evaluation, we use only chromosome 16, $\SI{98.2}{Mb}$ in length.
-We aligned all the reads to all the chromosomes with the bowtie2 aligner and selected any read pair that has an alignment to chromosome 16 consistent with the library length within $5$ standard deviations.
-We instructed bowtie2 to consider up to $5$ seeds (switch {\tt -R 5}) and to report the best out of $6$ alignments (switch {\tt -M 5}).
-Also, we consider partial alignments (switch {\tt --local}).
-
-%% 1Somewhat inaccurate. The error correctors will attempt to error
-%% correct the reads with no alignment. They are just not used in the
-%% ratios of the first table.
-% The purpose of the study is to see what fraction of the errors are eliminated.
-% That requires us to match the original reads against the finished sequence for each of the three genomes in order to determine how many errors the original reads have.
-% Some reads have enough errors that the aligner could not match them against the finished sequence.
-% These reads were eliminated from the study and all results ignore the deleted reads.
-% In particular, the fractions of reads eliminated before the study began were $8.9\%$ for \species{R. sphaeroides}, $15.6\%$ for \species{S.aureus} and $2.5\%$ for \species{M. musculus}.
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\section*{Authors contributions}
-G.M. provided the implementation of Quorum and performed the evaluation.
-A.Z. provided code improvements.
-All the authors contributed to the development of the algorithm, writing of the manuscript and approved it for publication.
-
-    
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\section*{Acknowledgements}
-  \ifthenelse{\boolean{publ}}{\small}{ }
-The authors were supported by grant ...
-
-
- 
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%                  The Bibliography                       %%
-%%                                                         %%              
-%%  Bmc_article.bst  will be used to                       %%
-%%  create a .BBL file for submission, which includes      %%
-%%  XML structured for BMC.                                %%
-%%                                                         %%
-%%                                                         %%
-%%  Note that the displayed Bibliography will not          %% 
-%%  necessarily be rendered by Latex exactly as specified  %%
-%%  in the online Instructions for Authors.                %% 
-%%                                                         %%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-
-{
-  \ifthenelse{\boolean{publ}}{\footnotesize}{\small}
-  \bibliographystyle{bmc_article}  % Style BST file
-  \bibliography{bmc_article}
-}     % Bibliography file (usually '*.bib' ) 
-
-%%%%%%%%%%%
-
-\ifthenelse{\boolean{publ}}{\end{multicols}}{}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%                               %%
-%% Figures                       %%
-%%                               %%
-%% NB: this is for captions and  %%
-%% Titles. All graphics must be  %%
-%% submitted separately and NOT  %%
-%% included in the Tex document  %%
-%%                               %%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-%%
-%% Do not use \listoffigures as most will included as separate files
-
-% \section*{Figures}
-% \subsection*{Figure 1 - Sample figure title}
-% A short description of the figure content
-% should go here.
-
-% \subsection*{Figure 2 - Sample figure title}
-% Figure legend text.
-
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%                               %%
-%% Tables                        %%
-%%                               %%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-% \newrobustcmd{\bnum}[1]{\bfseries #1}
-
-%% Use of \listoftables is discouraged.
-%%
-\newcounter{tablecounter}
-\newcommand{\tabledesc}[1]{%
-\refstepcounter{tablecounter}%
-\subsection*{Table \thetablecounter\  - #1}%
-}
-%% Winner number in a table
-\newcommand{\winner}[1]{\bfseries #1}
-\newcommand{\tn}[1]{S[detect-weight,table-format=#1]}
-
-\section*{Tables}
-\robustify\bfseries
-
-
-\tabledesc{Perfect output reads and bases as percent of input.}
-\label{table:perfect-reads}
-
-A perfect read is a read (possibly trimmed) that aligns with no error on its full length to the finish sequence.
-This table reports in the ``Reads'' column the number of perfect error-corrected reads as a proportion of the number of original reads (with an alignment to the finished sequence).
-The ``Sequence'' column displays the number of bases in perfect error-corrected reads as a proportion of the number of bases in original reads (with an alignment to the finished sequence).
-These ratios ignore the original reads which do not align at all.
-
-Because in the input data, all the reads have the same length ($\approx \SI{100}{bases}$), the two columns are equal for the correctors that do not trim the reads.
-
-\bigskip
-
-\begin{tabular}{@{}lS[detect-weight,table-format=2.1]S[detect-weight,table-format=2.1]S[detect-weight,table-format=2.1]S[detect-weight,table-format=2.1]S[detect-weight,table-format=2.1]S[detect-weight,table-format=2.1]@{}}
-\toprule
-Corrector & \multicolumn{2}{c}{Rhodobacter} & \multicolumn{2}{c}{Staphylococcus} &\multicolumn{2}{c}{Mouse}                      \\
-\cmidrule(rl){2-3} \cmidrule(rl){4-5} \cmidrule(l){6-7}
-{}        & {Reads (\%)}  & {Sequence (\%)} & {Reads (\%)}  & {Sequence (\%)} & {Reads (\%)}  & {Sequence (\%)} \\
-\midrule                                                                                                       
-none      & 20.9          & 20.9            & 33.1          & 33.1            & 48.3          & 48.3            \\
-trim20B   & 44.4          & 35.6            & 46.3          & 37.2            & 79.4          & 63.6            \\
-trimQual5 & 76.2          & 51.2            & 35.3          & 35.1            & 78.0          & 71.9            \\
-coral     & 58.2          & 58.2            & 73.5          & 73.5            & 80.9          & 80.9            \\
-echo      & 56.3          & 56.3            & 65.1          & 65.1            &               &                 \\
-hitec     & 60.8          & 60.8            & 77.9          & \winner{77.9}   &               &                 \\
-% quakedk   & 61.9          & 48.5            &               &                 &               &                 \\
-quake     & 80.5          & 58.9            & 68.2          & 57.6            & 88.7          & 81.3            \\
-\quorum   & \winner{90.2} & \winner{68.2}   & \winner{84.8} & 69.8            & \winner{90.9} & \winner{86.9}   \\
-\bottomrule
-\end{tabular}
-
-%
-%
-\tabledesc{Chimeric reads}
-
-\label{table:chimeric}
-
-% Jim: We have to make sure that our definitions agree with what I put in the main text. Two distinct pieces allows one to be extremely small and it does not say that the whole read is the union of the two pieces.
-A chimeric read is defined here as a read that does not align in one piece while it has two disjoint subsequences that align to far apart regions of the finished sequence. 
-The table shows the number of chimeric reads after error correction.
-``None'' denote the number without any error correction.
-
-\bigskip
-
-\begin{tabular}{@{}lS[detect-weight,table-format=4]S[detect-weight,table-format=4]S[detect-weight,table-format=6]@{}}
-\toprule
-{Corrector} & {Rhodobacter} & {Staphylococcus} & {Mouse}        \\
-\midrule                                                       
-none        & 2086          & 733              & 296772         \\
-trim20B     & 1655          & 597              & 250382         \\
-trimQual5   & 649           & 720              & 148439         \\
-coral       & 2047          & 1024             & 225052         \\
-echo        & 1809          & 704              &                \\
-hitec       & 6375          & 1200             &                \\
-quake       & 61            & 651              & \winner{63079} \\
-quorum      & \winner{46}   & \winner{35}      & 93158          \\
-\bottomrule
-\end{tabular}
-
-%
-%
-\tabledesc{Errors in output including introduced errors}
-\label{table:left-introduced}
-
-The ``Bases trimmed'' is the percentage of bases in trimmed reads compared with bases in the original reads.
-All the bases in a discarded read count as bases trimmed off.
-The ``Errors not trimmed from reads'' is the percentage of errors in the trimmed reads compared with the errors in the original reads.
-The ``errors left in trimmed reads'' is the percentage of errors in the corrected reads compared with the errors in the trimmed reads.
-The ``Errors introduced'' is the number of errors introduced divided by the number of errors in the original reads.
-These are counted in the previous column ``errors left in trimmed reads''.
-Finally, the ``Errors in corrected trimmed reads'' is the percentage of errors in corrected reads compared with the errors in the original reads.
-If $C_i$ is the value in the $i$-th column, then following holds: $C_2 \cdot C_3 = C_5$.
-
-For a corrector that does not trim, then $C_1 = 0.0$ (no bases trim) and $C_2 = 100$ (all the original errors are left because of the absence of trimming).
-A pure trimmer has $C_3 = 100$ (no correction made) and $C_4 = 0$ (no error introduced).
-
-\bigskip
-
-\begin{tabular}{@{}lS[detect-weight,table-format=2.1]S[detect-weight,table-format=3.1]S[detect-weight,table-format=2.2]S[detect-weight,table-format=2.1]S[detect-weight,table-format=2.1]@{}}
-\toprule
-          & 1          & 2                    & 3                   & 4               & 5                        \\
-\cmidrule{2-6}
-{}        & {\% bases} & {\% errors not}      & {\% of errors left} & {\% errors}     & {\% errors in corrected} \\
-Corrector & {trimmed}  & {trimmed from reads} & {in trimmed reads}  & {introduced}    & {trimmed reads}          \\
-\midrule
-{}        & \multicolumn{5}{c}{Rhodobacter}                                                                      \\
-\cmidrule{2-6} 
-trim20B   & 19.8       & 43.9                 & 100                 & 0.00            & 43.9                     \\
-trimQual5 & 36.0       & 11.2                 & 100                 & 0.00            & 11.2                     \\
-coral     & 0.00       & 100                  & 77.7                & 0.766           & 77.7                     \\
-echo      & 0.00       & 100                  & 65.1                & 2.11            & 65.1                     \\
-hitec     & 0.00       & 100                  & 61.1                & 10.4            & 61.1                     \\
-% quakedk & 30.6       & 81.5                 & 98.2                & 0.365           & 80.1                     \\ 
-quake     & 40.6       & \winner{2.06}        & 16.6                & \winner{0.0473} & 0.342                    \\ 
-quorum    & 31.2       & 14.7                 & \winner{2.13}       & 0.0669          & \winner{0.314}           \\
-\cmidrule{2-6}
-{}        & \multicolumn{5}{c}{Staphylococcus}                                                                   \\
-\cmidrule{2-6}
-trim20B   & 19.8       & 53.8                 & 100                 & 0.00            & 53.8                     \\
-trimQual5 & 1.30       & 91.7                 & 100                 & 0.00            & 91.7                     \\
-coral     & 0.00       & 100                  & 52.8                & 1.08            & 52.8                     \\
-echo      & 0.00       & 100                  & 38.6                & 0.628           & 38.6                     \\
-hitec     & 0.00       & 100                  & 21.3                & 1.57            & 21.3                     \\
-quake     & 42.0       & \winner{13 .7}       & 4.98                & 0.115           & 0.682                    \\
-quorum    & 29.8       & 42.1                 & \winner{1.14}       & \winner{0.0882} & \winner{0.478}           \\
-\cmidrule{2-6}
-{}        & \multicolumn{5}{c}{Mouse}                                                                            \\
-\cmidrule{2-6}
-trim20B   & 19.8       & 29.0                 & 100                 & 0.00            & 29.0                     \\
-trimQual5 & 10.5       & 28.0                 & 100                 & 0.00            & 28.0                     \\
-coral     & 0.00       & 100                  & 69.0                & 12.5            & 69.0                     \\
-quake     & 14.2       & \winner{10.4}        & 71.5                & \winner{.494}   & \winner{7.40}            \\
-quorum    & 6.75       & 29.4                 & \winner{34.7}       & .786            & 10.2                     \\
-\bottomrule
-\end{tabular}
-
-%
-%
-
-%
-%
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%                               %%
-%% Additional Files              %%
-%%                               %%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-% \section*{Additional Files}
-% \subsection*{Additional file 1 --- Sample additional file title}
-% Additional file descriptions text (including details of how to
-% view the file, if it is in a non-standard format or the file extension).  This might
-% refer to a multi-page table or a figure.
-
-% \subsection*{Additional file 2 --- Sample additional file title}
-% Additional file descriptions text.
-
-
-\end{bmcformat}
-\end{document}
-
-
-
-
-
-
-
-
-% LocalWords:  QuORUM HiTEC misassemblies Illumina Rhodobacter
-% LocalWords:  contigs
diff --git a/paper/readme.html b/paper/readme.html
deleted file mode 100755
index 93095a2..0000000
--- a/paper/readme.html
+++ /dev/null
@@ -1,237 +0,0 @@
-<html>
-<head>
-<meta http-equiv=Content-Type content="text/html; charset=windows-1252">
-<title>BioMed Central TeX template files</title>
-<style><!--
-.Normal
-	{font-size:12.0pt;
-	font-family:"Times New Roman";}
-.MsoBodyText
-	{tab-stops:382.75pt;
-	text-autospace:none;
-	font-size:10.0pt;
-	font-family:"Times New Roman";}
-.MsoBlockText
-	{tab-stops:382.75pt;
-	text-autospace:none;
-	font-size:10.0pt;
-	font-family:"Times New Roman";}
--->
-</style>
-</head>
-<body lang=EN-GB link=blue vlink=purple class="Normal" bgcolor="#FFFFFF">
-<h1>BioMed Central TeX template  - Version 0.4 (January 27<sup>th</sup> 2006)</h1>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:14.5pt;'>1 BioMed Central LaTeX template distribution</span></p>
-<table border=1 cellspacing=0 cellpadding=0>
-  <tr> 
-    <td width=284 valign=top class="Normal"> 
-      <p style='  text-autospace:none'><span
-  lang=EN-US style='font-size:10.0pt;font-family:"Courier New";'>bmc_article.tex</span></p>
-    </td>
-    <td width=284 valign=top class="Normal"> 
-      <p style='text-autospace:none'>The BioMed Central  manuscript template. 
-        Edit a copy of this file.</p>
-    </td>
-  </tr>
-  <tr> 
-    <td width=284 valign=top class="Normal"> 
-      <p style='  text-autospace:none'><span
-  lang=EN-US style='font-size:10.0pt;font-family:"Courier New";'>bmc_article.bib</span></p>
-    </td>
-    <td width=284 valign=top class="Normal"> 
-      <p style='text-autospace:none'><span lang=EN-US
-  style='font-size:10.0pt;'>A sample BibTeX bibliography file used to create a .bbl by BibTeX using the bmc_article.bst file </span></p>
-    </td>
-  </tr>
-  <tr> 
-    <td width=284 valign=top class="Normal"> 
-      <p style='  text-autospace:none'><span
-  lang=EN-US style='font-size:10.0pt;font-family:"Courier New";'>bmc_article.bst</span><span lang=EN-US style='font-size:10.0pt;
-  '></span></p>
-    </td>
-    <td width=284 valign=top class="Normal"> 
-      <p class=MsoBodyText><span lang=EN-US>The BibTeX bibliography style file 
-        for the BioMed Central reference format</span></p>
-    </td>
-  </tr>
-  <tr> 
-    <td width=284 valign=top class="Normal"> 
-      <p style='  text-autospace:none'><span
-  lang=EN-US style='font-size:10.0pt;font-family:"Courier New";'>bmc_article.cls</span><span lang=EN-US style='font-size:10.0pt;
-  '></span></p>
-    </td>
-    <td width=284 valign=top class="Normal"> 
-      <p style='text-autospace:none'><span lang=EN-US
-  style='font-size:10.0pt;'>Page layout for for manuscripts. This makes small 
-        changes to the standard article template</span></p>
-    </td>
-  </tr>
-  <tr> 
-    <td width=284 valign=top class="Normal"> 
-      <p style='  text-autospace:none'><span
-  lang=EN-US style='font-size:10.0pt;font-family:"Courier New";'>readme.html</span></p>
-    </td>
-    <td width=284 valign=top class="Normal"> 
-      <p style='  text-autospace:none'><span
-  lang=EN-US style='font-size:10.0pt;'>This document.</span></p>
-    </td>
-  </tr>
-</table>
-<p style='
-text-autospace:none'><span> </span></p>
-<h2><span lang=EN-US> &nbsp; </span></h2>
-<h2><span lang=EN-US>2 Requirements </span></h2>
-<p style='text-autospace:none'><span lang=EN-US>2.1</span></p>
-<p style='text-autospace:none'><span lang=EN-US>The BioMed Central TeX template 
-  should work with TeX distributions on any platform – it has been tested with 
-  <a
-href="http://www.uoregon.edu/~koch/texshop/texshop.html">TeXShop</a> on Mac OS 
-  X and <a href="http://www.miktex.org/">MiKTeX</a> for Windows.</span></p>
-<p><span lang=EN-US>2.2 </span></p>
-<p><span lang=EN-US style='font-size:10.0pt;'>In order to submit a manuscript 
-  as a .tex file to BioMed Central, you <i>must</i></span></p>
-<ul type=disc>
-  <li><span
-     lang=EN-US style='font-size:10.0pt;'>use the BioMed Central template</span></li>
-  <li><span
-     lang=EN-US style='font-size:10.0pt;'>format your references with BibTeX using 
-    the </span><span lang=EN-US style='font-size:
-     10.0pt;font-family:&quot;Courier New&quot;;'>bmc_article.bst</span><span
-     lang=EN-US style='font-size:10.0pt;'> style file</span></li>
-  <li><span
-     lang=EN-US style='font-size:10.0pt;'>not rely on any non-standard macros, 
-    classes or files</span></li>
-</ul>
-<p><span lang=EN-US style='font-size:10.0pt;'>If your TeX manuscript does not 
-  meet the criteria above it will need to be converted to DVI format prior to 
-  submission.</span><span
-lang=EN-US></span></p>
-<h2><span lang=EN-US>2 Guidelines for creating your manuscript using TeX</span></h2>
-<p style='text-autospace:none'><span lang=EN-US>2.1</span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:10.0pt;'>Follow the guidelines in the BioMed Central instructions 
-  for authors given at http://www.biomedcentral.com/info/authors/</span></p>
-<p style='text-autospace:none'><span lang=EN-US>2.2</span></p>
-<p style='text-autospace:none'><span lang=EN-US style='font-size:10.0pt;'>Make 
-  sure your manuscript is compiled with LaTeX2e</span><span
-lang=EN-US style='font-size:7.0pt;'> </span><span
-lang=EN-US style='font-size:10.0pt;'>by using <i>documentclass</i>{.</span><span lang=EN-US style='font-size:10.0pt;'>. 
-  . } and not <i>documentstyle</i>{. . . } in the preamble at the top of your 
-  <i>.tex </i>document.</span></p>
-<p style='text-autospace:none'><span lang=EN-US style='font-size:10.0pt;'>A template manuscript is supplied entitled <i>bmc_article.tex</i> which
-sets up the preferred page layout based on the standard <i>article.cls</i>. Two different styles are supplied; Review Style, which produces single column double spaced text, and Publication Style which produces two-column text. They can be toggled by commenting or uncommenting the relevant lines in the TeX file.</span>
-</p>
-<p style='text-autospace:none'><span lang=EN-US>2.3</span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:10.0pt;'>Make sure that you only a single <i>.tex </i>document 
-  for the entire manuscript, as you will need to upload it as a single file (together 
-  with its associated formatted bibliography file) </span><span lang=EN-US
-style='font-size:10.0pt;'>. Do not use the </span><span lang=EN-US
-style='font-size:10.0pt;font-family:Courier;'>\input </span><span
-lang=EN-US style='font-size:10.0pt;'>command to include other </span><span lang=EN-US style='font-size:10.0pt;font-family:Courier;
-'>.tex</span><span lang=EN-US style='font-size:10.0pt;
-'> files.</span></p>
-<p style='text-autospace:none'><span lang=EN-US>2.4</span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:10.0pt;'>The BioMed Central template uses the <i>cite.sty</i> 
-  citation style and <i>url.sty</i> for url references. It also uses <i>ifthen.sty</i> and <i>multicol.sty</i> You should also use these 
-  during the creation of your manuscript.</span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:10.0pt;'>See</span></p>
-<p class=MsoBlockText><span lang=EN-US>http://www.ctan.org/tex-archive/macros/latex/contrib/cite/cite.sty, 
-  <br>
-  http://www.ctan.org/tex-archive/macros/latex/contrib/misc/url.sty</span><br>
-  http://www.ctan.org/tex-archive/macros/latex/unpacked/ifthen.sty</span><br>
-  http://www.ctan.org/tex-archive/macros/latex209/contrib/geomsty/multicol.sty</span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:10.0pt;'>for these style files if they are not in your local 
-  archive.</span></p>
-<p style='text-autospace:none'><i><span lang=EN-US
-style='font-size:10.0pt;'>cite.sty</span></i><span
-lang=EN-US style='font-size:10.0pt;'> turns [1,2,3,4] into [1-4].</span></p>
-<p style='text-autospace:none'><i><span lang=EN-US
-style='font-size:10.0pt;'>url.sty</span></i><span
-lang=EN-US style='font-size:10.0pt;'> formats urls so they can be broken down 
-  cleanly when overflowing the right text boundary.</span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:14.5pt;'>3 BibTeX</span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:10.0pt;'>References <i>must</i> be formatted with BibTeX using 
-  the BioMed Central style file.</span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:10.0pt;'>i.e. when using the template, do not alter the command: 
-  </span><span lang=EN-US
-style='font-size:10.0pt;'>\bibliographystyle{</span><span lang=EN-US style='font-size:10.0pt;font-family:Courier;
-'>bmc_article</span><span lang=EN-US
-style='font-size:10.0pt;'>}</span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:10.0pt;'>The bibliography datafile is referred to with \<i>bibliography</i>{datafile1, 
-  . . . , . . . } </span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:10.0pt;'>The template makes use of a sample bibliography called 
-  </span><span lang=EN-US style='font-size:10.0pt;font-family:Courier;
-'>bmc_article.bib </span><span lang=EN-US
-style='font-size:10.0pt;'> - you should update the \<i>bibliography</i> tag to 
-  refer to your own bibliography.</span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:14.5pt;'>4 Notes on uploading your manuscript</span></p>
-<p style='text-autospace:none'><span lang=EN-US>4.1</span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:10.0pt;'>Make sure you are submitting only one <i>.tex</i> document 
-  </span><span lang=EN-US
-style='font-size:10.0pt;'>Please note that figures, large tables and any other 
-  reference material should be submitted as separate files, not embedded in the 
-  manuscript. </span></p>
-<p style='text-autospace:none'><span lang=EN-US>4.2</span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:10.0pt;'>A <i>.bbl</i> file is generated when you use BibTeX 
-  to format your article's reference list. It contains formatted details of all 
-  references used in the manuscript. After uploading a TeX file to BioMed Central, 
-  you will then be prompted to upload the <i>.bbl</i> file which goes with it.</span><span lang=EN-US
-style='font-size:10.0pt;'>.</span><span lang=EN-US style='font-size:14.5pt;font-family:&quot;Times New Roman&quot;;
-'><br clear=all style='page-break-before:always'>
-  </span> </p>
-<h2><span lang=EN-US>5 The TeX article layout</span></h2>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:10.0pt;'>This is the sectioning for a BMC-series Research Article l 
-  manuscript submission . . .<br />For other types of articles or for non-BMC series journals, see the relevant section headings at <a
-href="http://www.biomedcentral.com/info/authors/">http://www.biomedcentral.com/info/authors/</a></span></p>
-<p style='text-autospace:none'><span
-lang=EN-US style='font-size:9.0pt;'>• Abstract</span></p>
-<p style='text-autospace:none'><span
-lang=EN-US style='font-size:9.0pt;'>– Background</span></p>
-<p style='text-autospace:none'><span
-lang=EN-US style='font-size:9.0pt;'>– Results</span></p>
-<p style='text-autospace:none'><span
-lang=EN-US style='font-size:9.0pt;'>– Conclusions</span></p>
-<p style='text-autospace:none'><span
-lang=EN-US style='font-size:9.0pt;'>• Background</span></p>
-<p style='text-autospace:none'><span
-lang=EN-US style='font-size:9.0pt;'>• Methods</span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:9.0pt;'>• Results and Discussion</span></p>
-<p style='text-autospace:none'><span
-lang=EN-US style='font-size:9.0pt;'>• Conclusions</span></p>
-<span
-lang=EN-US style='font-size:9.0pt;'>• Authors contributions</span></p>
-<p style='text-autospace:none'><span
-lang=EN-US style='font-size:9.0pt;'>• Acknowledgements</span></p>
-<p style='text-autospace:none'><span
-lang=EN-US style='font-size:9.0pt;'>• References</span></p>
-<p style='text-autospace:none'><span
-lang=EN-US style='font-size:9.0pt;'>• Figures</span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:9.0pt;'>• Tables</span></p>
-<p style='text-autospace:none'><span lang=EN-US
-style='font-size:9.0pt;'>• Additional files</span></p>
-<h2><span lang=EN-US>5 Further information</span><span
-lang=EN-US style='font-size:9.0pt'></span></h2>
-<p><span style='font-size:10.0pt;'>The latest version of the BioMed Central TeX 
-  template distribution, and full instructions on its use, are available here:</span></p>
-<p style='text-autospace:none'><span
-style='font-size:10.0pt;'><a
-href="http://www.biomedcentral.com/info/ifora/tex/">http://www.biomedcentral.com/info/ifora/tex/</a></span><span
-lang=EN-US style='font-size:10.0pt;'></span></p>
-</body>
-</html>
diff --git a/poster_CSH_2012/Poster.pdf b/poster_CSH_2012/Poster.pdf
deleted file mode 100644
index fe556c1..0000000
Binary files a/poster_CSH_2012/Poster.pdf and /dev/null differ
diff --git a/poster_CSH_2012/Poster.sla b/poster_CSH_2012/Poster.sla
deleted file mode 100644
index 45ca2a6..0000000
--- a/poster_CSH_2012/Poster.sla
+++ /dev/null
@@ -1,343 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<SCRIBUSUTF8NEW Version="1.4.0">
-    <DOCUMENT ANZPAGES="1" PAGEWIDTH="2592" PAGEHEIGHT="2592" BORDERLEFT="40" BORDERRIGHT="40" BORDERTOP="40" BORDERBOTTOM="40" PRESET="0" BleedTop="0" BleedLeft="0" BleedRight="0" BleedBottom="0" ORIENTATION="0" PAGESIZE="Custom" FIRSTNUM="1" BOOK="0" AUTOSPALTEN="1" ABSTSPALTEN="11" UNITS="0" DFONT="Bitstream Charter Bold" DSIZE="12" DCOL="1" DGAP="0" TabFill="" TabWidth="36" AUTHOR="" COMMENTS="" KEYWORDS="" PUBLISHER="" DOCDATE="" DOCTYPE="" DOCFORMAT="" DOCIDENT="" DOCSOURCE="" DOCLANGINFO="" DOCRELATION="" DOCCOVER="" DOCRIGHTS="" DOCCONTRIB="" TITLE="" VHOCH="33" VHOCHSC="66" VTIEF="33" VTIEFSC="66" VKAPIT="75" BASEGRID="14.4" BASEO="0" AUTOL="20" UnderlinePos="-1" UnderlineWidth="-1" StrikeThruPos="-1" StrikeThruWidth="-1" GROUPC="3" HCMS="0" DPSo="0" DPSFo="0" DPuse="0" DPgam="0" DPbla="1" DPMo="sRGB IEC61966-2.1" DPPr="Fogra27L CMYK Coated Press" DPIn="sRGB IEC61966-2.1" DPInCMYK="Fogra27L CMYK Coated Press" DPIn2="sRGB IEC61966-2.1" DPIn3="Fogra27L CMYK Coated Press" DISc="1" DIIm="0" ALAYER="0" LANGUAGE="English" MINWORDLEN="3" HYCOUNT="2" AUTOMATIC="1" AUTOCHECK="0" GUIDELOCK="0" SnapToGuides="1" SnapToGrid="0" MINGRID="20" MAJGRID="100" SHOWGRID="0" SHOWGUIDES="1" showcolborders="1" SHOWFRAME="1" SHOWLAYERM="0" SHOWMARGIN="1" SHOWBASE="0" SHOWPICT="1" SHOWControl="0" SHOWLINK="0" rulerMode="1" showrulers="1" showBleed="1" rulerXoffset="0" rulerYoffset="0" GuideRad="10" GRAB="4" POLYC="4" POLYF="0.707106781186548" POLYR="0" POLYCUR="0" POLYFD="0" POLYS="0" AutoSave="1" AutoSaveTime="600000" ScratchBottom="20" ScratchLeft="100" ScratchRight="100" ScratchTop="20" GapHorizontal="0" GapVertical="40" StartArrow="0" EndArrow="0" PEN="Black" BRUSH="None" PENLINE="Black" PENTEXT="Black" StrokeText="Black" TextBackGround="None" TextLineColor="None" TextBackGroundShade="100" TextLineShade="100" TextPenShade="100" TextStrokeShade="100" STIL="1" STILLINE="1" WIDTH="1" WIDTHLINE="1" PENSHADE="100" LINESHADE="100" BRUSHSHADE="100" MAGMIN="10" MAGMAX="3200" MAGSTEP="200" CPICT="None" PICTSHADE="100" PICTSCX="1" PICTSCY="1" PSCALE="1" PASPECT="1" EmbeddedPath="0" HalfRes="1" dispX="10" dispY="10" constrain="15" MINORC="#00ff00" MAJORC="#00ff00" GuideC="#000080" BaseC="#c0c0c0" GuideZ="10" BACKG="1" PAGEC="#ffffff" MARGC="#0000ff" RANDF="0" currentProfile="PDF 1.4">
-        <CheckProfile Name="PDF 1.3" ignoreErrors="0" autoCheck="1" checkGlyphs="1" checkOrphans="1" checkOverflow="1" checkPictures="1" checkResolution="1" checkTransparency="1" minResolution="144" maxResolution="2400" checkAnnotations="0" checkRasterPDF="1" checkForGIF="1" ignoreOffLayers="0" checkOffConflictLayers="0"/>
-        <CheckProfile Name="PDF 1.4" ignoreErrors="0" autoCheck="1" checkGlyphs="1" checkOrphans="1" checkOverflow="1" checkPictures="1" checkResolution="1" checkTransparency="0" minResolution="144" maxResolution="2400" checkAnnotations="0" checkRasterPDF="1" checkForGIF="1" ignoreOffLayers="0" checkOffConflictLayers="0"/>
-        <CheckProfile Name="PDF 1.5" ignoreErrors="0" autoCheck="1" checkGlyphs="1" checkOrphans="1" checkOverflow="1" checkPictures="1" checkResolution="1" checkTransparency="0" minResolution="144" maxResolution="2400" checkAnnotations="0" checkRasterPDF="1" checkForGIF="1" ignoreOffLayers="0" checkOffConflictLayers="0"/>
-        <CheckProfile Name="PDF/X-3" ignoreErrors="0" autoCheck="1" checkGlyphs="1" checkOrphans="1" checkOverflow="1" checkPictures="1" checkResolution="1" checkTransparency="1" minResolution="144" maxResolution="2400" checkAnnotations="1" checkRasterPDF="1" checkForGIF="1" ignoreOffLayers="0" checkOffConflictLayers="0"/>
-        <CheckProfile Name="PostScript" ignoreErrors="0" autoCheck="1" checkGlyphs="1" checkOrphans="1" checkOverflow="1" checkPictures="1" checkResolution="1" checkTransparency="1" minResolution="144" maxResolution="2400" checkAnnotations="0" checkRasterPDF="1" checkForGIF="1" ignoreOffLayers="0" checkOffConflictLayers="0"/>
-        <COLOR NAME="Black" CMYK="#000000ff" Spot="0" Register="0"/>
-        <COLOR NAME="Blue" RGB="#0000ff" Spot="0" Register="0"/>
-        <COLOR NAME="Cool Black" CMYK="#990000ff" Spot="0" Register="0"/>
-        <COLOR NAME="Cyan" CMYK="#ff000000" Spot="0" Register="0"/>
-        <COLOR NAME="Green" RGB="#00ff00" Spot="0" Register="0"/>
-        <COLOR NAME="Magenta" CMYK="#00ff0000" Spot="0" Register="0"/>
-        <COLOR NAME="Red" RGB="#ff0000" Spot="0" Register="0"/>
-        <COLOR NAME="Registration" CMYK="#ffffffff" Spot="0" Register="1"/>
-        <COLOR NAME="Rich Black" CMYK="#996666ff" Spot="0" Register="0"/>
-        <COLOR NAME="Warm Black" CMYK="#00994cff" Spot="0" Register="0"/>
-        <COLOR NAME="White" CMYK="#00000000" Spot="0" Register="0"/>
-        <COLOR NAME="Yellow" CMYK="#0000ff00" Spot="0" Register="0"/>
-        <HYPHEN/>
-        <STYLE NAME="Default Paragraph Style" DefaultStyle="1" ALIGN="3" LINESPMode="1" LINESP="15" INDENT="0" RMARGIN="0" FIRST="0" VOR="0" NACH="0" DROP="0" DROPLIN="2" DROPDIST="0" CPARENT="Default Character Style" FONT="Liberation Sans Regular" FONTSIZE="30"/>
-        <STYLE NAME="Citation" ALIGN="0" FIRST="19" CPARENT="Default Character Style"/>
-        <CHARSTYLE CNAME="Default Character Style" DefaultStyle="1" FONT="Liberation Sans Regular" FONTSIZE="20" FEATURES="inherit" FCOLOR="Black" FSHADE="100" SCOLOR="Black" SSHADE="100" TXTSHX="5" TXTSHY="-5" TXTOUT="1" TXTULP="-0.1" TXTULW="-0.1" TXTSTP="-0.1" TXTSTW="-0.1" SCALEH="100" SCALEV="100" BASEO="0" KERN="0" LANGUAGE="English"/>
-        <LAYERS NUMMER="0" LEVEL="0" NAME="Background" SICHTBAR="1" DRUCKEN="1" EDIT="1" FLOW="1" TRANS="1" BLEND="0" OUTL="0" LAYERC="#000000"/>
-        <Printer firstUse="1" toFile="1" useAltPrintCommand="1" outputSeparations="1" useSpotColors="1" useColor="1" mirrorH="1" mirrorV="1" useICC="1" doGCR="1" doClip="1" setDevParam="1" useDocBleeds="1" cropMarks="1" bleedMarks="1" registrationMarks="1" colorMarks="1" includePDFMarks="1" PSLevel="-4606285" PDLanguage="-4606285" markOffset="-1.80567630144012e+307" BleedTop="0" BleedLeft="0" BleedRight="0" BleedBottom="0" printer="" filename="" separationName="" printerCommand=""/>
-        <PDF firstUse="0" Thumbnails="0" Articles="0" Bookmarks="0" Compress="1" CMethod="0" Quality="0" MirrorH="0" MirrorV="0" Clip="0" RotateDeg="0" PresentMode="0" RecalcPic="0" Grayscale="0" RGBMode="1" UseProfiles="0" UseProfiles2="0" Binding="0" PicRes="300" Resolution="300" Version="14" Intent="1" Intent2="0" SolidP="sRGB IEC61966-2.1" ImageP="sRGB IEC61966-2.1" PrintP="Fogra27L CMYK Coated Press" InfoString="" BTop="0" BLeft="0" BRight="0" BBottom="0" useDocBleeds="0" cropMarks="0" bleedMarks="0" registrationMarks="0" colorMarks="0" docInfoMarks="0" markOffset="0" ImagePr="0" PassOwner="" PassUser="" Permissions="-4" Encrypt="0" UseLayers="0" UseLpi="0" UseSpotColors="1" doMultiFile="0" displayBookmarks="0" displayFullscreen="0" displayLayers="0" displayThumbs="0" hideMenuBar="0" hideToolBar="0" fitWindow="0" PageLayout="0" openAction="">
-            <Fonts Name="Liberation Sans Bold"/>
-            <Fonts Name="Liberation Sans Italic"/>
-            <Fonts Name="Liberation Sans Regular"/>
-            <Effekte pageEffectDuration="1" pageViewDuration="1" effectType="0" Dm="0" M="0" Di="0"/>
-            <LPI Color="" Frequency="133" Angle="45" SpotFunction="3"/>
-            <LPI Color="Black" Frequency="133" Angle="45" SpotFunction="3"/>
-            <LPI Color="Cyan" Frequency="133" Angle="105" SpotFunction="3"/>
-            <LPI Color="Magenta" Frequency="133" Angle="75" SpotFunction="3"/>
-            <LPI Color="Yellow" Frequency="133" Angle="90" SpotFunction="3"/>
-        </PDF>
-        <DocItemAttributes/>
-        <TablesOfContents/>
-        <PageSets>
-            <Set Name="Single Page" FirstPage="0" Rows="1" Columns="1"/>
-            <Set Name="Double Sided" FirstPage="1" Rows="1" Columns="2">
-                <PageNames Name="Left Page"/>
-                <PageNames Name="Right Page"/>
-            </Set>
-            <Set Name="3-Fold" FirstPage="0" Rows="1" Columns="3">
-                <PageNames Name="Left Page"/>
-                <PageNames Name="Middle"/>
-                <PageNames Name="Right Page"/>
-            </Set>
-            <Set Name="4-Fold" FirstPage="0" Rows="1" Columns="4">
-                <PageNames Name="Left Page"/>
-                <PageNames Name="Middle Left"/>
-                <PageNames Name="Middle Right"/>
-                <PageNames Name="Right Page"/>
-            </Set>
-        </PageSets>
-        <Sections>
-            <Section Number="0" Name="0" From="0" To="0" Type="Type_1_2_3" Start="1" Reversed="0" Active="1"/>
-        </Sections>
-        <MASTERPAGE PAGEXPOS="100" PAGEYPOS="20" PAGEWIDTH="2592" PAGEHEIGHT="2592" BORDERLEFT="40" BORDERRIGHT="40" BORDERTOP="40" BORDERBOTTOM="40" NUM="0" NAM="Normal" MNAM="" Size="Custom" Orientation="0" LEFT="0" PRESET="0" VerticalGuides="" HorizontalGuides="" AGhorizontalAutoGap="0" AGverticalAutoGap="0" AGhorizontalAutoCount="0" AGverticalAutoCount="0" AGhorizontalAutoRefer="0" AGverticalAutoRefer="0" AGSelection="0 0 0 0"/>
-        <PAGE PAGEXPOS="100" PAGEYPOS="20" PAGEWIDTH="2592" PAGEHEIGHT="2592" BORDERLEFT="40" BORDERRIGHT="40" BORDERTOP="40" BORDERBOTTOM="40" NUM="0" NAM="" MNAM="Normal" Size="Custom" Orientation="0" LEFT="0" PRESET="0" VerticalGuides="852.5 892.5 1747.5 1709 " HorizontalGuides="355 " AGhorizontalAutoGap="0" AGverticalAutoGap="0" AGhorizontalAutoCount="0" AGverticalAutoCount="0" AGhorizontalAutoRefer="0" AGverticalAutoRefer="0" AGSelection="0 0 0 0"/>
-        <PAGEOBJECT OwnPage="0" PTYPE="4" XPOS="140" YPOS="60" WIDTH="2512" HEIGHT="127.5" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="1" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 2512 0 2512 0 2512 0 2512 0 2512 127.5 2512 127.5 2512 127.5 2512 127.5 0 127.5 0 127.5 0 127.5 0 127.5 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 2512 0 2512 0 2512 0 2512 0 2512 127.5 2512 127.5 2512 127.5 2512 127.5 0 127.5 0 127.5 0 127.5 0 127.5 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" ALIGN="1" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <ITEXT FONTSIZE="60" CH="QuorUM (QUality Optimized Reads from the University of Maryland):"/>
-            <para/>
-            <ITEXT FONTSIZE="60" CH="An error correction software for second generation sequencing reads."/>
-            <trail/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="9" XPOS="992.5" YPOS="869" WIDTH="816.5" HEIGHT="309" RADRECT="0" FRTYPE="0" CLIPEDIT="1" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="-20.5" LOCALY="14" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="0" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 816.5 0 816.5 0 816.5 0 816.5 0 816.5 309 816.5 309 816.5 309 816.5 309 0 309 0 309 0 309 0 309 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 816.5 0 816.5 0 816.5 0 816.5 0 816.5 309 816.5 309 816.5 309 816.5 309 0 309 0 309 0 309 0 309 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="0" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="198" gWidth="815" gHeight="439.285714285714" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <trail/>
-            <LATEX ConfigFile="100_latex.xml" DPI="0" USE_PREAMBLE="1">
-                <PROPERTY name="additionalheaders" value="\usepackage{amsmath}&#10;\usepackage{nicefrac}&#10;\usepackage{booktabs}&#10;\usepackage{multirow}&#10;\usepackage{siunitx}&#10;\usepackage{etoolbox}"/>
-                <PROPERTY name="font" value="\usepackage{helvet}"/>
-                <PROPERTY name="fontsize" value="20pt"/>\sf
-\large
-\newcommand{\cellc}[1]{\multicolumn{1}{c}{#1}}
-\robustify\bfseries
-\center
-
-\begin{tabular}
-{lS[detect-weight,detect-family,table-format=2.1]S[detect-all,table-format=2.2]} 
-\toprule
-\multirow{2}{*}{Corrector} &amp; \cellc{error after}  &amp; \multirow{2}{*}{Mistakes} \\
-\cmidrule(lr){2-2}         &amp; \cellc{error before} &amp;                           \\
-                           &amp; \cellc{\%}           &amp; \cellc{\%}                \\
-\midrule
-ECHO                       &amp; 40.7                 &amp; 17.1                      \\
-HiTEC                      &amp; 33.7                 &amp; 19.8                      \\
-Coral                      &amp; 32.5                 &amp; 18.3                      \\
-Quake                      &amp; 89.8                 &amp; {\bfseries1.29}           \\
-QuorUM                     &amp; {\bfseries24.9}      &amp; 2.47                      \\
-\bottomrule
-\end{tabular}
-</LATEX>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="4" XPOS="994" YPOS="375" WIDTH="815" HEIGHT="486" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" ISIZE="20" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="1" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 815 0 815 0 815 0 815 0 815 486 815 486 815 486 815 486 0 486 0 486 0 486 0 486 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 815 0 815 0 815 0 815 0 815 486 815 486 815 486 815 486 0 486 0 486 0 486 0 486 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="815" gHeight="439.285714285714" ALIGN="3" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <ITEXT FONT="Liberation Sans Bold" CH="Error correction statistics"/>
-            <para PARENT="Default Paragraph Style" ALIGN="1"/>
-            <para PARENT="Default Paragraph Style"/>
-            <ITEXT CH="The sequencing reads are aligned against the finished sequence using BWA. Then, the error corrected reads are compared to their corresponding uncorrected reads to measure the number of errors properly corrected."/>
-            <para PARENT="Default Paragraph Style"/>
-            <ITEXT CH="In the following table, the ratio &quot;error after / error after&quot; is the percentage of errors that are remaining after the error correction procedure. The mistakes column represent, in percentage of the total number of errors, the number of new errors introduced."/>
-            <para PARENT="Default Paragraph Style"/>
-            <ITEXT CH="QuorUM corrects the largest number of errors initially present in the sequencing reads while introducing relatively few new errors."/>
-            <trail PARENT="Default Paragraph Style"/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="6" XPOS="992.5" YPOS="1263" WIDTH="816.5" HEIGHT="637.75" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="0" PCOLOR="None" PCOLOR2="Black" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="Group7" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="1" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="1" groupsLastItem="2" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 816.5 0 816.5 0 816.5 0 816.5 0 816.5 637.75 816.5 637.75 816.5 637.75 816.5 637.75 0 637.75 0 637.75 0 637.75 0 637.75 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 816.5 0 816.5 0 816.5 0 816.5 0 816.5 637.75 816.5 637.75 816.5 637.75 816.5 637.75 0 637.75 0 637.75 0 637.75 0 637.75 0 0 0 0 " NUMGROUP="1" GROUPS="1 " startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <trail/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="9" XPOS="994" YPOS="1633.45454545455" WIDTH="815" HEIGHT="267.29545454545" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="0" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 815 0 815 0 815 0 815 0 815 267.295 815 267.295 815 267.295 815 267.295 0 267.295 0 267.295 0 267.295 0 267.295 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 815 0 815 0 815 0 815 0 815 267.295 815 267.295 815 267.295 815 267.295 0 267.295 0 267.295 0 267.295 0 267.295 0 0 0 0 " NUMGROUP="1" GROUPS="1 " startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="1.5" gYpos="370.45454545455" gWidth="816.5" gHeight="637.75" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <trail/>
-            <LATEX ConfigFile="100_latex.xml" DPI="0" USE_PREAMBLE="1">
-                <PROPERTY name="additionalheaders" value="\usepackage{amsmath}&#10;\usepackage{booktabs}&#10;\usepackage{siunitx}&#10;\usepackage{etoolbox}"/>
-                <PROPERTY name="font" value="\usepackage{helvet}"/>
-                <PROPERTY name="fontsize" value="20pt"/>\sf
-\large
-\newcommand{\cellc}[1]{\multicolumn{1}{c}{#1}}
-\robustify\bfseries
-\center
-
-\begin{tabular}{lS[detect-weight,detect-family,table-format=2.2]S[detect-weight,detect-family,table-format=2.2]S[detect-weight,detect-family,table-format=2.2]}
-\toprule
-Corrector &amp; \cellc{N25}     &amp; \cellc{N50}     &amp; \cellc{N90}     \\ 
-          &amp; \cellc{kb}      &amp; \cellc{kb}      &amp; \cellc{kb}      \\
-\midrule
-None      &amp; 20.7            &amp; 12.1            &amp; 3.54            \\
-ECHO      &amp; 33.6            &amp; 20.6            &amp; 5.74            \\
-HiTEC     &amp; 15.6            &amp; 9.76            &amp; 2.75            \\
-Coral     &amp; 32.2            &amp; 18.0            &amp; 5.48            \\
-Quake     &amp; 20.3            &amp; 12.7            &amp; 3.38            \\
-QuorUM    &amp; {\bfseries42.4} &amp; {\bfseries26.3} &amp; {\bfseries7.10} \\
-\bottomrule
-\end{tabular}
-</LATEX>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="4" XPOS="992.5" YPOS="1263" WIDTH="816.5" HEIGHT="342.5" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" IFONT="Liberation Sans Regular" ISIZE="20" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="1" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 816.5 0 816.5 0 816.5 0 816.5 0 816.5 342.5 816.5 342.5 816.5 342.5 816.5 342.5 0 342.5 0 342.5 0 342.5 0 342.5 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 816.5 0 816.5 0 816.5 0 816.5 0 816.5 342.5 816.5 342.5 816.5 342.5 816.5 342.5 0 342.5 0 342.5 0 342.5 0 342.5 0 0 0 0 " NUMGROUP="1" GROUPS="1 " startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="816.5" gHeight="637.75" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <ITEXT FONT="Liberation Sans Bold" FONTSIZE="30" CH="Idealized contig sizes"/>
-            <para PARENT="Default Paragraph Style" ALIGN="1"/>
-            <para PARENT="Default Paragraph Style"/>
-            <ITEXT FONTSIZE="30" CH="The reads are mapped to the finished sequence allowing for at most 1 error. An idealized contig is a stretch of sequence covered by reads overlapping by at least 10 bases. A read can be placed multiple times. The idealized N25, N50 and N90 are approximations of the best assembly obtainable with these error corrected reads."/>
-            <para PARENT="Default Paragraph Style"/>
-            <ITEXT CH="QuorUM error corrected reads give larger idealized contig sizes for all three measures."/>
-            <para PARENT="Default Paragraph Style"/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="2" XPOS="1847.5" YPOS="841" WIDTH="804.5" HEIGHT="494" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1.96031746031746" LOCALSCY="1.96031746031746" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="0" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="error_vs_reads_abs_histogram.pdf" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="0" EMBEDDED="0" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 494 804.5 494 804.5 494 804.5 494 0 494 0 494 0 494 0 494 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 494 804.5 494 804.5 494 804.5 494 0 494 0 494 0 494 0 494 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="0" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <trail/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="2" XPOS="140" YPOS="60" WIDTH="250" HEIGHT="250" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1.62337662337662" LOCALSCY="1.62337662337662" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="0" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="../UMDIcons/UMD-Seal-Informal.pdf" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="0" EMBEDDED="0" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 250 0 250 0 250 0 250 0 250 250 250 250 250 250 250 250 0 250 0 250 0 250 0 250 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 250 0 250 0 250 0 250 0 250 250 250 250 250 250 250 250 0 250 0 250 0 250 0 250 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <trail/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="2" XPOS="2402" YPOS="60" WIDTH="250" HEIGHT="250" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1.62337662337662" LOCALSCY="1.62337662337662" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="0" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="../UMDIcons/UMD-Seal-Informal.pdf" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="0" EMBEDDED="0" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 250 0 250 0 250 0 250 0 250 250 250 250 250 250 250 250 0 250 0 250 0 250 0 250 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 250 0 250 0 250 0 250 0 250 250 250 250 250 250 250 250 0 250 0 250 0 250 0 250 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <trail/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="4" XPOS="140" YPOS="199.96992481203" WIDTH="2512" HEIGHT="112.03007518797" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" IFONT="Liberation Sans Regular" ISIZE="25" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="1" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 2512 0 2512 0 2512 0 2512 0 2512 112.03 2512 112.03 2512 112.03 2512 112.03 0 112.03 0 112.03 0 112.03 0 112.03 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 2512 0 2512 0 2512 0 2512 0 2512 112.03 2512 112.03 2512 112.03 2512 112.03 0 112.03 0 112.03 0 112.03 0 112.03 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" ALIGN="1" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <ITEXT FONT="Liberation Sans Regular" FONTSIZE="40" CH="Guillaume Marçais, Aleksey Zimin, Jim Yorke"/>
-            <para/>
-            <ITEXT FONTSIZE="30" CH="Institut for Physical Science and Technology"/>
-            <para/>
-            <ITEXT FONTSIZE="30" CH="University of Maryland, College Park, MD 20742-2431"/>
-            <trail/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="6" XPOS="1847.5" YPOS="2274" WIDTH="804.5" HEIGHT="298" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="0" PCOLOR="None" PCOLOR2="Black" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="Group6" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="1" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="1" groupsLastItem="3" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 298 804.5 298 804.5 298 804.5 298 0 298 0 298 0 298 0 298 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 298 804.5 298 804.5 298 804.5 298 0 298 0 298 0 298 0 298 0 0 0 0 " NUMGROUP="1" GROUPS="2 " startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <trail/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="4" XPOS="1847.5" YPOS="2274" WIDTH="804.5" HEIGHT="103.81954887218" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="1" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 103.82 804.5 103.82 804.5 103.82 804.5 103.82 0 103.82 0 103.82 0 103.82 0 103.82 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 103.82 804.5 103.82 804.5 103.82 804.5 103.82 0 103.82 0 103.82 0 103.82 0 103.82 0 0 0 0 " NUMGROUP="1" GROUPS="2 " startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="804.5" gHeight="298" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <ITEXT CH="This project is supported by the following grants: NIH R01HG002945, USDA sub-award 201015739-01, USDA CSREES 2008-04049."/>
-            <trail/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="2" XPOS="1967.5" YPOS="2412" WIDTH="236" HEIGHT="160" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="4" LOCALSCY="4" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="../../Logos/USDA_logo.pdf" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="0" EMBEDDED="0" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 236 0 236 0 236 0 236 0 236 160 236 160 236 160 236 160 0 160 0 160 0 160 0 160 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 236 0 236 0 236 0 236 0 236 160 236 160 236 160 236 160 0 160 0 160 0 160 0 160 0 0 0 0 " NUMGROUP="1" GROUPS="2 " startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="120" gYpos="138" gWidth="804.5" gHeight="298" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <trail/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="2" XPOS="2342" YPOS="2380" WIDTH="192" HEIGHT="192" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="0.3" LOCALSCY="0.3" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="../../Logos/NIH_logo.pdf" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="0" EMBEDDED="0" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 192 0 192 0 192 0 192 0 192 192 192 192 192 192 192 192 0 192 0 192 0 192 0 192 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 192 0 192 0 192 0 192 0 192 192 192 192 192 192 192 192 0 192 0 192 0 192 0 192 0 0 0 0 " NUMGROUP="1" GROUPS="2 " startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="494.5" gYpos="106" gWidth="804.5" gHeight="298" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <trail/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="4" XPOS="1847.5" YPOS="375" WIDTH="804.5" HEIGHT="450" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="1" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 450 804.5 450 804.5 450 804.5 450 0 450 0 450 0 450 0 450 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 450 804.5 450 804.5 450 804.5 450 0 450 0 450 0 450 0 450 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <ITEXT FONT="Liberation Sans Bold" CH="Percentage of initial bases aligned"/>
-            <para PARENT="Default Paragraph Style" ALIGN="1"/>
-            <para PARENT="Default Paragraph Style"/>
-            <ITEXT CH="The error corrected reads are aligned against the finished sequence. The number of errors in a read is defined as the length of the read minus the number of unaligned bases (i.e. mismatches and indels). The following plot represents the number of bases (as a percentage of total number of bases in the uncorrected reads) which aligned in reads with 0, 1, 2, 3, 4, or more than 5 errors."/>
-            <para PARENT="Default Paragraph Style"/>
-            <ITEXT CH="Despite the trimming, QuorUM output the most sequence which aligns to the finished genome. As seen on the following table, almost all of the bases in QuorUM's error corrected reads are in perfect reads (reads with zero errors). "/>
-            <trail PARENT="Default Paragraph Style"/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="9" XPOS="140" YPOS="2332.5" WIDTH="812.5" HEIGHT="239.5" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="0" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 812.5 0 812.5 0 812.5 0 812.5 0 812.5 239.5 812.5 239.5 812.5 239.5 812.5 239.5 0 239.5 0 239.5 0 239.5 0 239.5 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 812.5 0 812.5 0 812.5 0 812.5 0 812.5 239.5 812.5 239.5 812.5 239.5 812.5 239.5 0 239.5 0 239.5 0 239.5 0 239.5 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <trail/>
-            <LATEX ConfigFile="100_latex.xml" DPI="0" USE_PREAMBLE="1">
-                <PROPERTY name="additionalheaders" value="\usepackage{amsmath}&#10;\usepackage{booktabs}&#10;\usepackage{siunitx}&#10;\usepackage{etoolbox}"/>
-                <PROPERTY name="font" value="\usepackage{helvet}"/>
-                <PROPERTY name="fontsize" value="20pt"/>\sf
-\large
-\center
-\begin{tabular}{lr}
-  \toprule
-  Corrector &amp; {\# of chimeric reads} \\
-  \midrule
-  None      &amp; 1555                 \\
-  ECHO      &amp; 1764                 \\
-  HiTEC     &amp; 3810                 \\
-  Coral     &amp; 1253                 \\
-  Quake     &amp; 302                    \\
-  Quorum    &amp; {\bfseries111}         \\
- \bottomrule
-\end{tabular}
-</LATEX>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="4" XPOS="140" YPOS="375" WIDTH="812.5" HEIGHT="1065" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="1" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 812.5 0 812.5 0 812.5 0 812.5 0 812.5 1065 812.5 1065 812.5 1065 812.5 1065 0 1065 0 1065 0 1065 0 1065 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 812.5 0 812.5 0 812.5 0 812.5 0 812.5 1065 812.5 1065 812.5 1065 812.5 1065 0 1065 0 1065 0 1065 0 1065 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <ITEXT FONT="Liberation Sans Bold" CH="Abstract."/>
-            <para PARENT="Default Paragraph Style" ALIGN="1"/>
-            <para PARENT="Default Paragraph Style"/>
-            <ITEXT CH="Illumina Sequencing data can provide high coverage of a genome by relatively short (100-150bp) reads at a low cost. The base error rates in the reads vary greatly along the read sequence. Low quality bases can be trimmed off or error-corrected. Trimming, especially based on the quality scores, can eliminate large amounts of useful sequence in the reads. Error correction is an alternative to trimming that takes advantage of the high coverage of the genome to make the high confidence base corrections in the reads. Error correction allows for more effective use of the sequencing data thus reducing the coverage depth requirements in sequencing projects and increasing the quality of the resulting assemblies. A conservative error correction is also useful for re-sequencing projects: error corrected reads map to the reference much better than the original sequenced reads. The vast majority of errors in Illumina data are substitutions, where a base is read incorrectly. Also, the sequence quality is usually higher on the 5’ end of a read and deteriorates toward the 3’ end of the read. Each base in the read has a quality score associated with it. Based on these observations we developed an error correction technique called QuorUM (Quality Optimized Reads from the University of Maryland, pronounced Quorum). QuorUM corrects substitution errors in Illumina reads with high throughput: 4 billion bases per hour on a 48–core computer. We present the comparisons and timings of QuorUM performance to other available error correction techniques: ECHO, HiTEC, Coral and Quake."/>
-            <trail PARENT="Default Paragraph Style"/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="4" XPOS="140" YPOS="1499" WIDTH="812.5" HEIGHT="423" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="1" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 812.5 0 812.5 0 812.5 0 812.5 0 812.5 423 812.5 423 812.5 423 812.5 423 0 423 0 423 0 423 0 423 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 812.5 0 812.5 0 812.5 0 812.5 0 812.5 423 812.5 423 812.5 423 812.5 423 0 423 0 423 0 423 0 423 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <ITEXT FONT="Liberation Sans Bold" CH="Methods"/>
-            <para PARENT="Default Paragraph Style" ALIGN="1"/>
-            <para PARENT="Default Paragraph Style"/>
-            <ITEXT CH="The error correctors are compared on the Illumina reads from the PE library of the bacteria "/>
-            <ITEXT FONT="Liberation Sans Italic" CH="Rhodobacter sphaeroides"/>
-            <ITEXT FONT="Liberation Sans Regular" CH=" (accession SRX033397). The dataset contains 2 million reads 101bp in length. For the comparison we use the Error Correction Evaluation Toolkit from the Aluru HPC Group (Error correction statistics) and our own metrics (Chimeric reads, Idealized contig sizes and Percentage of initial bases aligned). "/>
-            <para/>
-            <ITEXT CH="ECHO, HiTEC and Coral only correct reads while Quake and Quorum also trim reads."/>
-            <trail/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="9" XPOS="992.5" YPOS="2328.25" WIDTH="816.5" HEIGHT="243.75" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="148.75" LOCALY="6.5" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="0" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 816.5 0 816.5 0 816.5 0 816.5 0 816.5 243.75 816.5 243.75 816.5 243.75 816.5 243.75 0 243.75 0 243.75 0 243.75 0 243.75 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 816.5 0 816.5 0 816.5 0 816.5 0 816.5 243.75 816.5 243.75 816.5 243.75 816.5 243.75 0 243.75 0 243.75 0 243.75 0 243.75 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <trail/>
-            <LATEX ConfigFile="100_latex.xml" DPI="0" USE_PREAMBLE="1">
-                <PROPERTY name="additionalheaders" value="\usepackage{amsmath}&#10;\usepackage{booktabs}&#10;\usepackage{siunitx}&#10;\usepackage{etoolbox}"/>
-                <PROPERTY name="font" value="\usepackage{helvet}"/>
-                <PROPERTY name="fontsize" value="20pt"/>\sf
-\large
-%\center
-
-\begin{tabular}{lrrS[detect-weight,detect-family,table-format=2.2]}
-    \toprule
-    Corrector &amp; 1 thread     &amp; 16 threads   &amp; \multicolumn{1}{c}{Speed up\hspace{4mm}} \\
-              &amp; (minutes)    &amp; (minutes)    &amp;                                          \\ 
-    \midrule
-    ECHO      &amp; 151          &amp; 141          &amp; 1.07                                     \\
-    HiTEC     &amp; 42           &amp; -            &amp;                                          \\
-    Coral     &amp; 87           &amp; 10           &amp; 8.70                                     \\
-    Quake     &amp; {\bfseries9} &amp; {\bfseries5} &amp; 1.80                                     \\
-    QuorUM    &amp; 61           &amp; {\bfseries5} &amp; {\bfseries12.2}                          \\
-    \bottomrule
-\end{tabular}
-</LATEX>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="4" XPOS="992.5" YPOS="2051" WIDTH="816.5" HEIGHT="275" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="1" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 816.5 0 816.5 0 816.5 0 816.5 0 816.5 275 816.5 275 816.5 275 816.5 275 0 275 0 275 0 275 0 275 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 816.5 0 816.5 0 816.5 0 816.5 0 816.5 275 816.5 275 816.5 275 816.5 275 0 275 0 275 0 275 0 275 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <ITEXT FONT="Liberation Sans Bold" CH="Scalability"/>
-            <para PARENT="Default Paragraph Style" ALIGN="1"/>
-            <para/>
-            <ITEXT CH="Every error corrector tested, except HiTEC, can work in multi-threaded mode to take advantage of multi-CPU/multi-core machines. For the following table, the timing was performed on a 16-core AMD 2.9Ghz computer with 128GB of RAM running Linux 2.6.35.6."/>
-            <para PARENT="Default Paragraph Style" ALIGN="3"/>
-            <ITEXT CH="QuorUM scales well in that setting."/>
-            <trail PARENT="Default Paragraph Style"/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="4" XPOS="140" YPOS="1974" WIDTH="812.5" HEIGHT="342" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="1" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 812.5 0 812.5 0 812.5 0 812.5 0 812.5 342 812.5 342 812.5 342 812.5 342 0 342 0 342 0 342 0 342 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 812.5 0 812.5 0 812.5 0 812.5 0 812.5 342 812.5 342 812.5 342 812.5 342 0 342 0 342 0 342 0 342 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <ITEXT FONT="Liberation Sans Bold" CH="Chimeric reads"/>
-            <para ALIGN="1"/>
-            <para/>
-            <ITEXT CH="A read is considered chimeric if it two parts (at least 20 bases long) of the read aligns to far apart region of the finished sequence and the read does not align as a whole to the finished sequence."/>
-            <para PARENT="Default Paragraph Style" ALIGN="3"/>
-            <ITEXT CH="The error correctors that do not perform trimming (ECHO, HiTEC and Coral) provide only a small improvement or even create new chimeric reads. Only Quake and QuorUM provide a significant improvement."/>
-            <trail PARENT="Default Paragraph Style"/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="4" XPOS="1847.5" YPOS="1683" WIDTH="804.5" HEIGHT="228" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="1" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 228 804.5 228 804.5 228 804.5 228 0 228 0 228 0 228 0 228 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 228 804.5 228 804.5 228 804.5 228 0 228 0 228 0 228 0 228 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <ITEXT FONT="Liberation Sans Bold" CH="Conclusion"/>
-            <para PARENT="Default Paragraph Style" ALIGN="1"/>
-            <para/>
-            <ITEXT CH="QuorUM correct and trims Illumina reads with high accuracy and high speed on multi-core machines. The code is available under an open source license at:"/>
-            <para PARENT="Default Paragraph Style" ALIGN="3"/>
-            <ITEXT CH="ftp://ftp.genome.umd.edu/pub/quorum/."/>
-            <trail PARENT="Default Paragraph Style" ALIGN="3"/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="4" XPOS="1847.5" YPOS="1926" WIDTH="804.5" HEIGHT="324" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="1" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 324 804.5 324 804.5 324 804.5 324 0 324 0 324 0 324 0 324 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 324 804.5 324 804.5 324 804.5 324 0 324 0 324 0 324 0 324 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <ITEXT FONT="Liberation Sans Bold" CH="References"/>
-            <para ALIGN="1"/>
-            <para/>
-            <ITEXT FONTSIZE="20" CH="Kao, W.-C., Chan, A. H., &amp; Song, Y. S. (2011). ECHO: A reference-free short-read error correction algorithm. Genome research, 21(7), 1181-1192. doi:10.1101/gr.111351.110"/>
-            <para PARENT="Citation"/>
-            <ITEXT CH="Ilie, L., Fazayeli, F., &amp; Ilie, S. (2011). HiTEC: accurate error correction in high-throughput sequencing data. Bioinformatics, 27(3), 295-302."/>
-            <para PARENT="Citation"/>
-            <ITEXT CH="Salmela, L., &amp; Schröder, J. (2011). Correcting errors in short reads by multiple alignments. Bioinformatics, 27(11), 1455. Oxford Univ Press."/>
-            <para PARENT="Citation"/>
-            <ITEXT CH="Kelley, D. R., Schatz, M. C., &amp; Salzberg, S. L. (2010). Quake: quality-aware detection and correction of sequencing errors. Genome Biol, 11(11), R116. doi:10.1186/gb-2010-11-11-r116"/>
-            <para PARENT="Citation"/>
-            <ITEXT CH="Yang, X. (2012). A survey of error-correction methods for next-generation sequencing. Briefings in Bioinformatics."/>
-            <para PARENT="Citation"/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="9" XPOS="1847.5" YPOS="1424" WIDTH="804.5" HEIGHT="241" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="120.5" LOCALY="1.25" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="0" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 241 804.5 241 804.5 241 804.5 241 0 241 0 241 0 241 0 241 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 241 804.5 241 804.5 241 804.5 241 0 241 0 241 0 241 0 241 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <trail/>
-            <LATEX ConfigFile="100_latex.xml" DPI="0" USE_PREAMBLE="1">
-                <PROPERTY name="additionalheaders" value="\usepackage{amsmath}&#10;\usepackage{siunitx}&#10;\usepackage{etoolbox}&#10;\usepackage{booktabs}"/>
-                <PROPERTY name="font" value="\usepackage{helvet}"/>
-                <PROPERTY name="fontsize" value="20pt"/>\sf
-\large
-\robustify\bfseries
-
-\begin{tabular}
-{l@{\hspace{10mm}}S[detect-weight,detect-family]}
-\toprule
-Corrector &amp; {\% bases in perfect reads} \\
-\midrule
-None   &amp; 27.4 \\
-ECHO   &amp; 68.4 \\
-HiTEC  &amp; 71.3 \\
-Coral  &amp; 73.0 \\
-Quake  &amp; 74.6 \\
-QuorUM &amp; {\bfseries98.9} \\
-\bottomrule
-\end{tabular}
-</LATEX>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-        <PAGEOBJECT OwnPage="0" PTYPE="4" XPOS="1847.5" YPOS="1346.75" WIDTH="804.5" HEIGHT="67.75" RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None" PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0" PLINEJOIN="0" LOCALSCX="1" LOCALSCY="1" LOCALX="0" LOCALY="0" PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="1" RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0" PFILE="" PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1" EMBEDDED="1" LOCK="0" LOCKR="0" REVERS="0" TransValue="0" TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0" TopLine="0" LeftLine="0" RightLine="0" BottomLine="0" isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16" POCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 67.75 804.5 67.75 804.5 67.75 804.5 67.75 0 67.75 0 67.75 0 67.75 0 67.75 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0 804.5 0 804.5 0 804.5 0 804.5 0 804.5 67.75 804.5 67.75 804.5 67.75 804.5 67.75 0 67.75 0 67.75 0 67.75 0 67.75 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="1" Pagenumber="0" isInline="0" fillRule="1" doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0" BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1">
-            <ITEXT CH="Percentage of error corrected bases that aligned against the finished genome which are in error free reads."/>
-            <trail PARENT="Default Paragraph Style"/>
-            <PageItemAttributes/>
-        </PAGEOBJECT>
-    </DOCUMENT>
-</SCRIBUSUTF8NEW>
diff --git a/poster_CSH_2012/chimeric_reads.pdf b/poster_CSH_2012/chimeric_reads.pdf
deleted file mode 100644
index c72a8a2..0000000
Binary files a/poster_CSH_2012/chimeric_reads.pdf and /dev/null differ
diff --git a/poster_CSH_2012/chimeric_reads.svg b/poster_CSH_2012/chimeric_reads.svg
deleted file mode 100644
index 145ac9b..0000000
--- a/poster_CSH_2012/chimeric_reads.svg
+++ /dev/null
@@ -1,777 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   id="svg2"
-   version="1.1"
-   inkscape:version="0.48.1 r9760"
-   width="450"
-   height="315"
-   xml:space="preserve"
-   sodipodi:docname="chimeric_reads.pdf"><metadata
-     id="metadata8"><rdf:RDF><cc:Work
-         rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><defs
-     id="defs6"><marker
-       inkscape:stockid="Arrow1Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow1Mend"
-       style="overflow:visible"><path
-         inkscape:connector-curvature="0"
-         id="path4417"
-         d="M 0,0 5,-5 -12.5,0 5,5 0,0 z"
-         style="fill-rule:evenodd;stroke:#000000;stroke-width:1pt;marker-start:none"
-         transform="matrix(-0.4,0,0,-0.4,-4,0)" /></marker><marker
-       inkscape:stockid="Arrow1Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow1Mend-3"
-       style="overflow:visible"><path
-         inkscape:connector-curvature="0"
-         id="path4417-4"
-         d="M 0,0 5,-5 -12.5,0 5,5 0,0 z"
-         style="fill-rule:evenodd;stroke:#000000;stroke-width:1pt;marker-start:none"
-         transform="matrix(-0.4,0,0,-0.4,-4,0)" /></marker><marker
-       inkscape:stockid="Arrow1Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow1Mend-6"
-       style="overflow:visible"><path
-         inkscape:connector-curvature="0"
-         id="path4417-9"
-         d="M 0,0 5,-5 -12.5,0 5,5 0,0 z"
-         style="fill-rule:evenodd;stroke:#000000;stroke-width:1pt;marker-start:none"
-         transform="matrix(-0.4,0,0,-0.4,-4,0)" /></marker><marker
-       inkscape:stockid="Arrow1Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow1Mend-2"
-       style="overflow:visible"><path
-         inkscape:connector-curvature="0"
-         id="path4417-5"
-         d="M 0,0 5,-5 -12.5,0 5,5 0,0 z"
-         style="fill-rule:evenodd;stroke:#000000;stroke-width:1pt;marker-start:none"
-         transform="matrix(-0.4,0,0,-0.4,-4,0)" /></marker><marker
-       inkscape:stockid="Arrow1Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow1Mend-31"
-       style="overflow:visible"><path
-         inkscape:connector-curvature="0"
-         id="path4417-54"
-         d="M 0,0 5,-5 -12.5,0 5,5 0,0 z"
-         style="fill-rule:evenodd;stroke:#000000;stroke-width:1pt;marker-start:none"
-         transform="matrix(-0.4,0,0,-0.4,-4,0)" /></marker><marker
-       inkscape:stockid="Arrow1Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow1Mend-0"
-       style="overflow:visible"><path
-         inkscape:connector-curvature="0"
-         id="path4417-7"
-         d="M 0,0 5,-5 -12.5,0 5,5 0,0 z"
-         style="fill-rule:evenodd;stroke:#000000;stroke-width:1pt;marker-start:none"
-         transform="matrix(-0.4,0,0,-0.4,-4,0)" /></marker></defs><sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1280"
-     inkscape:window-height="1004"
-     id="namedview4"
-     showgrid="false"
-     inkscape:zoom="1.73"
-     inkscape:cx="209.76321"
-     inkscape:cy="169.99138"
-     inkscape:window-x="1280"
-     inkscape:window-y="0"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="g10" /><g
-     id="g10"
-     inkscape:groupmode="layer"
-     inkscape:label="chimeric_reads"
-     transform="matrix(1.25,0,0,-1.25,0,315)"><path
-       inkscape:connector-curvature="0"
-       id="path382"
-       style="fill:none;stroke:#ff4d00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,147.35 50.8,-0.9 50.75,-11 50.8,-7.6 50.75,-3.7 50.8,1.15 50.75,4"
-       sodipodi:nodetypes="ccccccc" /><path
-       inkscape:connector-curvature="0"
-       id="path14"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,22.4 3.15,0 m 301.5,0 -3.15,0" /><g
-       id="g16"><text
-         id="text18"
-         transform="matrix(1,0,0,-1,30.7167,20.0648)"><tspan
-           id="tspan20"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">10</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path22"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,43.35 1.55,0 m 303.1,0 -1.55,0 m -303.1,12.2 1.55,0 m 303.1,0 -1.55,0 m -303.1,8.7 1.55,0 m 303.1,0 -1.55,0 M 42.7,71 l 1.55,0 m 303.1,0 -1.55,0 m -303.1,5.5 1.55,0 m 303.1,0 -1.55,0 m -303.1,4.65 1.55,0 m 303.1,0 -1.55,0 m -303.1,4.05 1.55,0 m 303.1,0 -1.55,0 m -303.1,3.55 1.55,0 m 303.1,0 -1.55,0 m -303.1,3.15 3.15,0 m 301.5,0 -3.15,0" /><g
-       id="g24"><text
-         id="text26"
-         transform="matrix(1,0,0,-1,26.8249,89.5648)"><tspan
-           id="tspan28"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892 7.7839999"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">100</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path30"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,112.85 1.55,0 m 303.1,0 -1.55,0 m -303.1,12.25 1.55,0 m 303.1,0 -1.55,0 m -303.1,8.65 1.55,0 m 303.1,0 -1.55,0 m -303.1,6.75 1.55,0 m 303.1,0 -1.55,0 m -303.1,5.5 1.55,0 m 303.1,0 -1.55,0 m -303.1,4.65 1.55,0 m 303.1,0 -1.55,0 m -303.1,4.05 1.55,0 m 303.1,0 -1.55,0 m -303.1,3.55 1.55,0 m 303.1,0 -1.55,0 m -303.1,3.2 3.15,0 m 301.5,0 -3.15,0" /><g
-       id="g32"><text
-         id="text34"
-         transform="matrix(1,0,0,-1,22.9331,159.115)"><tspan
-           id="tspan36"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892 7.7839999 11.676"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">1000</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path38"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,182.35 1.55,0 m 303.1,0 -1.55,0 m -303.1,12.25 1.55,0 m 303.1,0 -1.55,0 m -303.1,8.7 1.55,0 m 303.1,0 -1.55,0 m -303.1,6.7 1.55,0 m 303.1,0 -1.55,0 m -303.1,5.55 1.55,0 m 303.1,0 -1.55,0 m -303.1,4.65 1.55,0 m 303.1,0 -1.55,0 m -303.1,4 1.55,0 m 303.1,0 -1.55,0 m -303.1,3.55 1.55,0 m 303.1,0 -1.55,0 m -303.1,3.2 3.15,0 m 301.5,0 -3.15,0" /><g
-       id="g40"><text
-         id="text42"
-         transform="matrix(1,0,0,-1,19.0413,228.615)"><tspan
-           id="tspan44"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892 7.7839999 11.676 15.568"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">10000</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path46"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g48"><text
-         id="text50"
-         transform="matrix(1,0,0,-1,39.7815,13.0648)"><tspan
-           id="tspan52"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">94</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path54"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 93.5,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g56"><text
-         id="text58"
-         transform="matrix(1,0,0,-1,90.5815,13.0648)"><tspan
-           id="tspan60"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">95</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path62"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 144.25,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g64"><text
-         id="text66"
-         transform="matrix(1,0,0,-1,141.332,13.0648)"><tspan
-           id="tspan68"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">96</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path70"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 195.05,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g72"><text
-         id="text74"
-         transform="matrix(1,0,0,-1,192.132,13.0648)"><tspan
-           id="tspan76"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">97</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path78"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 245.8,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g80"><text
-         id="text82"
-         transform="matrix(1,0,0,-1,242.882,13.0648)"><tspan
-           id="tspan84"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">98</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path86"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 296.6,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g88"><text
-         id="text90"
-         transform="matrix(1,0,0,-1,293.682,13.0648)"><tspan
-           id="tspan92"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">99</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path94"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 347.35,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g96"><text
-         id="text98"
-         transform="matrix(1,0,0,-1,342.485,13.0648)"><tspan
-           id="tspan100"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892 7.7839999"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">100</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path102"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,22.4 304.65,0 0,208.55 -304.65,0 0,-208.55 z" /><g
-       id="g104"><text
-         id="text106"
-         transform="matrix(0,1,1,0,7.93516,100.979)"><tspan
-           id="tspan108"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892 5.8379998 9.3380003 13.23 14.784 20.615 24.507 26.837999 28.392 31.892 33.838001 36.168999 40.061001 43.952999 47.845001"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"># chimeric reads</tspan></text>
-<text
-         id="text110"
-         transform="matrix(1,0,0,-1,170.88,2.56484)"><tspan
-           id="tspan112"
-           sodipodi:role="line"
-           y="0"
-           x="0 4.6690001 8.5609999 10.892 14.392 18.284 22.176001 24.122 26.068001 27.622 31.514 35.405998 39.298 41.243999 42.798 44.743999"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">Percent identity</tspan><tspan
-           id="tspan114"
-           sodipodi:role="line"
-           y="-236.55"
-           x="-26.444901 -21.3909 -17.498899 -15.9449 -10.1139 -6.2219 -3.8908999 -2.3369 1.1631 3.1091001 5.4401002 9.3320999 13.2241 17.1161 20.6161 22.562099 26.062099 29.562099 31.508101 33.454102 39.285099 43.177101 45.1231 48.6231 52.515099 54.461102 58.3531 62.245098 66.1371 67.691101 69.245102 71.191101"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">Chimeric reads vs. match quality</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path126"
-       style="fill:none;stroke:#00ff00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,226.8 50.8,-3.7 50.75,-17.75 50.8,-16.95 50.75,-8.5 50.8,-5.15 50.75,1.8"
-       sodipodi:nodetypes="ccccccc" /><path
-       inkscape:connector-curvature="0"
-       id="path128"
-       style="fill:none;stroke:#00ff00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,225.225 0,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path130"
-       style="fill:none;stroke:#00ff00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 41.125,226.8 3.15,0" /><path
-       inkscape:connector-curvature="0"
-       id="path132"
-       style="fill:none;stroke:#00ff00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 93.5,221.525 0,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path134"
-       style="fill:none;stroke:#00ff00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 91.925,223.1 3.15,0" /><path
-       inkscape:connector-curvature="0"
-       id="path136"
-       style="fill:none;stroke:#00ff00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 144.25,203.775 0,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path138"
-       style="fill:none;stroke:#00ff00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 142.675,205.35 3.15,0" /><path
-       inkscape:connector-curvature="0"
-       id="path140"
-       style="fill:none;stroke:#00ff00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 195.05,186.825 0,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path142"
-       style="fill:none;stroke:#00ff00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 193.475,188.4 3.15,0" /><path
-       inkscape:connector-curvature="0"
-       id="path144"
-       style="fill:none;stroke:#00ff00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 245.8,178.325 0,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path146"
-       style="fill:none;stroke:#00ff00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 244.225,179.9 3.15,0" /><path
-       inkscape:connector-curvature="0"
-       id="path148"
-       style="fill:none;stroke:#00ff00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 296.6,173.175 0,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path150"
-       style="fill:none;stroke:#00ff00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 295.025,174.75 3.15,0" /><path
-       inkscape:connector-curvature="0"
-       id="path152"
-       style="fill:none;stroke:#00ff00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 347.35,174.975 0,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path154"
-       style="fill:none;stroke:#00ff00;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 345.775,176.55 3.15,0" /><path
-       inkscape:connector-curvature="0"
-       id="path166"
-       style="fill:none;stroke:#0000ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,215.2 50.8,-2.55 50.75,-11.4 50.8,-10.1 50.75,-6.4 50.8,-6.2 50.75,2.3"
-       sodipodi:nodetypes="ccccccc" /><path
-       inkscape:connector-curvature="0"
-       id="path168"
-       style="fill:none;stroke:#0000ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 41.125,216.775 3.15,-3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path170"
-       style="fill:none;stroke:#0000ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 41.125,213.625 3.15,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path172"
-       style="fill:none;stroke:#0000ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 91.925,214.225 3.15,-3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path174"
-       style="fill:none;stroke:#0000ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 91.925,211.075 3.15,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path176"
-       style="fill:none;stroke:#0000ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 142.675,202.825 3.15,-3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path178"
-       style="fill:none;stroke:#0000ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 142.675,199.675 3.15,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path180"
-       style="fill:none;stroke:#0000ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 193.475,192.725 3.15,-3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path182"
-       style="fill:none;stroke:#0000ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 193.475,189.575 3.15,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path184"
-       style="fill:none;stroke:#0000ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 244.225,186.325 3.15,-3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path186"
-       style="fill:none;stroke:#0000ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 244.225,183.175 3.15,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path188"
-       style="fill:none;stroke:#0000ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 295.025,180.125 3.15,-3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path190"
-       style="fill:none;stroke:#0000ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 295.025,176.975 3.15,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path192"
-       style="fill:none;stroke:#0000ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 345.775,182.425 3.15,-3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path194"
-       style="fill:none;stroke:#0000ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 345.775,179.275 3.15,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path206"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,213.7 50.8,-0.9 50.75,-3.9 50.8,-2.15 50.75,-3 50.8,-1.95 50.75,0.7"
-       sodipodi:nodetypes="ccccccc" /><path
-       inkscape:connector-curvature="0"
-       id="path208"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,212.125 0,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path210"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 41.125,213.7 3.15,0" /><path
-       inkscape:connector-curvature="0"
-       id="path212"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 41.125,215.275 3.15,-3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path214"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 41.125,212.125 3.15,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path216"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 93.5,211.225 0,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path218"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 91.925,212.8 3.15,0" /><path
-       inkscape:connector-curvature="0"
-       id="path220"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 91.925,214.375 3.15,-3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path222"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 91.925,211.225 3.15,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path224"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 144.25,207.325 0,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path226"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 142.675,208.9 3.15,0" /><path
-       inkscape:connector-curvature="0"
-       id="path228"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 142.675,210.475 3.15,-3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path230"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 142.675,207.325 3.15,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path232"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 195.05,205.175 0,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path234"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 193.475,206.75 3.15,0" /><path
-       inkscape:connector-curvature="0"
-       id="path236"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 193.475,208.325 3.15,-3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path238"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 193.475,205.175 3.15,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path240"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 245.8,202.175 0,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path242"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 244.225,203.75 3.15,0" /><path
-       inkscape:connector-curvature="0"
-       id="path244"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 244.225,205.325 3.15,-3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path246"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 244.225,202.175 3.15,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path248"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 296.6,200.225 0,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path250"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 295.025,201.8 3.15,0" /><path
-       inkscape:connector-curvature="0"
-       id="path252"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 295.025,203.375 3.15,-3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path254"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 295.025,200.225 3.15,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path256"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 347.35,200.925 0,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path258"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 345.775,202.5 3.15,0" /><path
-       inkscape:connector-curvature="0"
-       id="path260"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 345.775,204.075 3.15,-3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path262"
-       style="fill:none;stroke:#ff00ff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 345.775,200.925 3.15,3.15" /><path
-       inkscape:connector-curvature="0"
-       id="path278"
-       style="fill:none;stroke:#00ffff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,217.65 50.8,-4.15 50.75,-18.95 50.8,-16.55 50.75,-7.55 50.8,-2.4 50.75,2.75"
-       sodipodi:nodetypes="ccccccc" /><path
-       inkscape:connector-curvature="0"
-       id="path280"
-       style="fill:none;stroke:#00ffff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 41.125,216.075 3.15,0 0,3.15 -3.15,0 0,-3.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path282"
-       style="fill:none;stroke:#00ffff;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,217.65 0,0" /><path
-       inkscape:connector-curvature="0"
-       id="path284"
-       style="fill:none;stroke:#00ffff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 91.925,211.925 3.15,0 0,3.15 -3.15,0 0,-3.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path286"
-       style="fill:none;stroke:#00ffff;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 93.5,213.5 0,0" /><path
-       inkscape:connector-curvature="0"
-       id="path288"
-       style="fill:none;stroke:#00ffff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 142.675,192.975 3.15,0 0,3.15 -3.15,0 0,-3.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path290"
-       style="fill:none;stroke:#00ffff;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 144.25,194.55 0,0" /><path
-       inkscape:connector-curvature="0"
-       id="path292"
-       style="fill:none;stroke:#00ffff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 193.475,176.425 3.15,0 0,3.15 -3.15,0 0,-3.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path294"
-       style="fill:none;stroke:#00ffff;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 195.05,178 0,0" /><path
-       inkscape:connector-curvature="0"
-       id="path296"
-       style="fill:none;stroke:#00ffff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 244.225,168.875 3.15,0 0,3.15 -3.15,0 0,-3.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path298"
-       style="fill:none;stroke:#00ffff;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 245.8,170.45 0,0" /><path
-       inkscape:connector-curvature="0"
-       id="path300"
-       style="fill:none;stroke:#00ffff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 295.025,166.475 3.15,0 0,3.15 -3.15,0 0,-3.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path302"
-       style="fill:none;stroke:#00ffff;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 296.6,168.05 0,0" /><path
-       inkscape:connector-curvature="0"
-       id="path304"
-       style="fill:none;stroke:#00ffff;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 345.775,169.225 3.15,0 0,3.15 -3.15,0 0,-3.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path306"
-       style="fill:none;stroke:#00ffff;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 347.35,170.8 0,0" /><path
-       inkscape:connector-curvature="0"
-       id="path384"
-       style="fill:#ff4d00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 44.275,147.35 c 0,0.87 -0.7055,1.575 -1.575,1.575 -0.8695,0 -1.575,-0.705 -1.575,-1.575 0,-0.87 0.7055,-1.575 1.575,-1.575 0.8695,0 1.575,0.705 1.575,1.575" /><path
-       inkscape:connector-curvature="0"
-       id="path386"
-       style="fill:#ff4d00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 95.075,146.45 c 0,0.87 -0.7055,1.575 -1.575,1.575 -0.8695,0 -1.575,-0.705 -1.575,-1.575 0,-0.87 0.7055,-1.575 1.575,-1.575 0.8695,0 1.575,0.705 1.575,1.575" /><path
-       inkscape:connector-curvature="0"
-       id="path388"
-       style="fill:#ff4d00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 145.825,135.45 c 0,0.87 -0.705,1.575 -1.575,1.575 -0.87,0 -1.575,-0.705 -1.575,-1.575 0,-0.87 0.705,-1.575 1.575,-1.575 0.87,0 1.575,0.705 1.575,1.575" /><path
-       inkscape:connector-curvature="0"
-       id="path390"
-       style="fill:#ff4d00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 196.625,127.85 c 0,0.87 -0.705,1.575 -1.575,1.575 -0.87,0 -1.575,-0.705 -1.575,-1.575 0,-0.87 0.705,-1.575 1.575,-1.575 0.87,0 1.575,0.705 1.575,1.575" /><path
-       inkscape:connector-curvature="0"
-       id="path392"
-       style="fill:#ff4d00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 247.375,124.15 c 0,0.87 -0.705,1.575 -1.575,1.575 -0.87,0 -1.575,-0.705 -1.575,-1.575 0,-0.87 0.705,-1.575 1.575,-1.575 0.87,0 1.575,0.705 1.575,1.575" /><path
-       inkscape:connector-curvature="0"
-       id="path394"
-       style="fill:#ff4d00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 298.175,125.3 c 0,0.87 -0.705,1.575 -1.575,1.575 -0.87,0 -1.575,-0.705 -1.575,-1.575 0,-0.87 0.705,-1.575 1.575,-1.575 0.87,0 1.575,0.705 1.575,1.575" /><path
-       inkscape:connector-curvature="0"
-       id="path396"
-       style="fill:#ff4d00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 348.925,129.3 c 0,0.87 -0.705,1.575 -1.575,1.575 -0.87,0 -1.575,-0.705 -1.575,-1.575 0,-0.87 0.705,-1.575 1.575,-1.575 0.87,0 1.575,0.705 1.575,1.575" /><path
-       inkscape:connector-curvature="0"
-       id="path406"
-       style="fill:none;stroke:#808080;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,105.15 50.8,-1.6 50.75,-6.65 50.8,-7.5 50.75,-3.85 50.8,9.5 50.75,10.3"
-       sodipodi:nodetypes="ccccccc" /><path
-       inkscape:connector-curvature="0"
-       id="path408"
-       style="fill:none;stroke:#808080;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,106.914 -1.575,-2.552 3.15,0 -1.575,2.552 z" /><path
-       inkscape:connector-curvature="0"
-       id="path410"
-       style="fill:none;stroke:#808080;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,105.15 0,0" /><path
-       inkscape:connector-curvature="0"
-       id="path412"
-       style="fill:none;stroke:#808080;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 93.5,105.314 -1.575,-2.552 3.15,0 -1.575,2.552 z" /><path
-       inkscape:connector-curvature="0"
-       id="path414"
-       style="fill:none;stroke:#808080;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 93.5,103.55 0,0" /><path
-       inkscape:connector-curvature="0"
-       id="path416"
-       style="fill:none;stroke:#808080;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 144.25,98.6641 -1.575,-2.5516 3.15,0 -1.575,2.5516 z" /><path
-       inkscape:connector-curvature="0"
-       id="path418"
-       style="fill:none;stroke:#808080;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 144.25,96.9 0,0" /><path
-       inkscape:connector-curvature="0"
-       id="path420"
-       style="fill:none;stroke:#808080;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 195.05,91.1641 -1.575,-2.5516 3.15,0 -1.575,2.5516 z" /><path
-       inkscape:connector-curvature="0"
-       id="path422"
-       style="fill:none;stroke:#808080;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 195.05,89.4 0,0" /><path
-       inkscape:connector-curvature="0"
-       id="path424"
-       style="fill:none;stroke:#808080;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 245.8,87.3141 -1.575,-2.5516 3.15,0 -1.575,2.5516 z" /><path
-       inkscape:connector-curvature="0"
-       id="path426"
-       style="fill:none;stroke:#808080;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 245.8,85.55 0,0" /><path
-       inkscape:connector-curvature="0"
-       id="path428"
-       style="fill:none;stroke:#808080;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 296.6,96.8141 -1.575,-2.5516 3.15,0 -1.575,2.5516 z" /><path
-       inkscape:connector-curvature="0"
-       id="path430"
-       style="fill:none;stroke:#808080;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 296.6,95.05 0,0" /><path
-       inkscape:connector-curvature="0"
-       id="path432"
-       style="fill:none;stroke:#808080;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 347.35,107.114 -1.575,-2.552 3.15,0 -1.575,2.552 z" /><path
-       inkscape:connector-curvature="0"
-       id="path434"
-       style="fill:none;stroke:#808080;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 347.35,105.35 0,0" /><path
-       inkscape:connector-curvature="0"
-       id="path440"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 42.7,22.4 304.65,0 0,208.55 -304.65,0 0,-208.55 z" /><path
-       style="fill:none;stroke:#000000;stroke-width:1.60000002;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow1Mend)"
-       d="M 100.11551,72.794112 C 124.12324,96.80184 124.12324,96.80184 124.12324,96.80184"
-       id="path3635"
-       inkscape:connector-curvature="0" /><text
-       xml:space="preserve"
-       style="font-size:11.19999981px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans"
-       x="80.057701"
-       y="-64.245621"
-       id="text4849"
-       sodipodi:linespacing="125%"
-       transform="scale(1,-1)"><tspan
-         sodipodi:role="line"
-         id="tspan4851"
-         x="80.057701"
-         y="-64.245621">Quorum</tspan></text>
-<path
-       inkscape:connector-curvature="0"
-       id="path4853"
-       d="m 113.57439,121.40141 42.29933,10.28903"
-       style="fill:none;stroke:#000000;stroke-width:1.60000002;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow1Mend)"
-       sodipodi:nodetypes="cc" /><text
-       xml:space="preserve"
-       style="font-size:11.19999981px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans"
-       x="79.32901"
-       y="-117.97173"
-       id="text4855"
-       sodipodi:linespacing="125%"
-       transform="scale(1,-1)"><tspan
-         sodipodi:role="line"
-         id="tspan4857"
-         x="79.32901"
-         y="-117.97173">Quake</tspan></text>
-<path
-       style="fill:none;stroke:#000000;stroke-width:1.6;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow1Mend)"
-       d="m 112.73522,180.2147 c 34.29674,9.71742 34.29674,9.71742 34.29674,9.71742"
-       id="path4859"
-       inkscape:connector-curvature="0" /><text
-       xml:space="preserve"
-       style="font-size:11.19999981px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans"
-       x="82.113762"
-       y="-176.26761"
-       id="text6159"
-       sodipodi:linespacing="125%"
-       transform="scale(1,-1)"><tspan
-         sodipodi:role="line"
-         id="tspan6161"
-         x="82.113762"
-         y="-176.26761">Coral</tspan></text>
-<path
-       style="fill:none;stroke:#000000;stroke-width:1.6;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow1Mend)"
-       d="m 208.90808,154.00982 7.62143,26.89913"
-       id="path5593"
-       inkscape:connector-curvature="0" /><text
-       xml:space="preserve"
-       style="font-size:11.19999981px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans"
-       x="178.42242"
-       y="-143.25015"
-       id="text6155"
-       sodipodi:linespacing="125%"
-       transform="scale(1,-1)"><tspan
-         sodipodi:role="line"
-         id="tspan6157"
-         x="178.42242"
-         y="-143.25015">Uncorrected</tspan></text>
-<g
-       id="g4525"
-       transform="translate(32,-3.2)"><path
-         inkscape:connector-curvature="0"
-         id="path5777"
-         d="m 272.77623,191.57601 -21.96762,-5.82815"
-         style="fill:none;stroke:#000000;stroke-width:1.60000002;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" /><text
-         transform="scale(1,-1)"
-         sodipodi:linespacing="125%"
-         id="text6163"
-         y="-187.54114"
-         x="274.31445"
-         style="font-size:11.19999981px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans"
-         xml:space="preserve"><tspan
-           y="-187.54114"
-           x="274.31445"
-           id="tspan6165"
-           sodipodi:role="line">Echo</tspan></text>
-</g><path
-       style="fill:none;stroke:#000000;stroke-width:1.6;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow1Mend)"
-       d="m 248.76124,216.19311 -27.79577,-8.96638"
-       id="path5963"
-       inkscape:connector-curvature="0" /><text
-       xml:space="preserve"
-       style="font-size:11.19999981px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans"
-       x="251.00282"
-       y="-213.05489"
-       id="text6147"
-       sodipodi:linespacing="125%"
-       transform="scale(1,-1)"><tspan
-         sodipodi:role="line"
-         x="251.00282"
-         y="-213.05489"
-         id="tspan6151">Hitec</tspan></text>
-</g></svg>
\ No newline at end of file
diff --git a/poster_CSH_2012/error_vs_reads_abs_histogram.pdf b/poster_CSH_2012/error_vs_reads_abs_histogram.pdf
deleted file mode 100644
index 964fc9a..0000000
Binary files a/poster_CSH_2012/error_vs_reads_abs_histogram.pdf and /dev/null differ
diff --git a/poster_CSH_2012/error_vs_reads_abs_histogram.svg b/poster_CSH_2012/error_vs_reads_abs_histogram.svg
deleted file mode 100644
index 2571ebd..0000000
--- a/poster_CSH_2012/error_vs_reads_abs_histogram.svg
+++ /dev/null
@@ -1,715 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   id="svg2"
-   version="1.1"
-   inkscape:version="0.48.1 r9760"
-   width="450"
-   height="315"
-   xml:space="preserve"
-   sodipodi:docname="error_vs_reads_abs_histogram.svg"><metadata
-     id="metadata8"><rdf:RDF><cc:Work
-         rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><defs
-     id="defs6">
-
-</defs><sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1280"
-     inkscape:window-height="774"
-     id="namedview4"
-     showgrid="false"
-     inkscape:zoom="1.61"
-     inkscape:cx="208.89217"
-     inkscape:cy="169.99138"
-     inkscape:window-x="0"
-     inkscape:window-y="225"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="g10" /><g
-     id="g10"
-     inkscape:groupmode="layer"
-     inkscape:label="error_vs_reads_abs_histogram"
-     transform="matrix(1.25,0,0,-1.25,0,315)"><path
-       inkscape:connector-curvature="0"
-       id="path14"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 51.1,22.4 3.15,0 m 293.1,0 -3.15,0" /><g
-       id="g16"><text
-   id="text18"
-   transform="matrix(1,0,0,-1,43.0085,20.0648)"><tspan
-     id="tspan20"
-     y="0"
-     x="0"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">0</tspan></text>
-
-</g><path
-       inkscape:connector-curvature="0"
-       id="path22"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 51.1,48.45 3.15,0 m 293.1,0 -3.15,0" /><g
-       id="g24"
-       transform="translate(11.866816,0)"><text
-   id="text26"
-   transform="matrix(1,0,0,-1,27.2452,46.1148)"><tspan
-     id="tspan28"
-     sodipodi:role="line"
-     y="0"
-     x="0"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">10</tspan></text>
-
-</g><path
-       inkscape:connector-curvature="0"
-       id="path30"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 51.1,74.55 3.15,0 m 293.1,0 -3.15,0" /><g
-       id="g32"
-       transform="translate(11.866816,0)"><text
-   id="text34"
-   transform="matrix(1,0,0,-1,27.2452,72.2148)"><tspan
-     id="tspan36"
-     sodipodi:role="line"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-     x="0"
-     y="0">20</tspan></text>
-
-</g><path
-       inkscape:connector-curvature="0"
-       id="path38"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 51.1,100.6 3.15,0 m 293.1,0 -3.15,0" /><g
-       id="g40"
-       transform="translate(11.866816,0)"><text
-   id="text42"
-   transform="matrix(1,0,0,-1,27.2452,98.2648)"><tspan
-     id="tspan44"
-     sodipodi:role="line"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-     x="0"
-     y="0">30</tspan></text>
-
-</g><path
-       inkscape:connector-curvature="0"
-       id="path46"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 51.1,126.7 3.15,0 m 293.1,0 -3.15,0" /><g
-       id="g48"
-       transform="translate(11.866816,0)"><text
-   id="text50"
-   transform="matrix(1,0,0,-1,27.2452,124.365)"><tspan
-     id="tspan52"
-     sodipodi:role="line"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-     x="0"
-     y="0">40</tspan></text>
-
-</g><path
-       inkscape:connector-curvature="0"
-       id="path54"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 51.1,152.75 3.15,0 m 293.1,0 -3.15,0" /><g
-       id="g56"
-       transform="translate(11.866816,0)"><text
-   id="text58"
-   transform="matrix(1,0,0,-1,27.2452,150.415)"><tspan
-     id="tspan60"
-     sodipodi:role="line"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-     x="0"
-     y="0">50</tspan></text>
-
-</g><path
-       inkscape:connector-curvature="0"
-       id="path62"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 51.1,178.8 3.15,0 m 293.1,0 -3.15,0" /><g
-       id="g64"
-       transform="translate(17.704316,0)"><text
-   id="text66"
-   transform="matrix(1,0,0,-1,21.4077,176.465)"><tspan
-     id="tspan68"
-     sodipodi:role="line"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-     x="0"
-     y="0">60</tspan></text>
-
-</g><path
-       inkscape:connector-curvature="0"
-       id="path70"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 51.1,204.9 3.15,0 m 293.1,0 -3.15,0" /><g
-       id="g72"
-       transform="translate(17.704316,0)"><text
-   id="text74"
-   transform="matrix(1,0,0,-1,21.4077,202.565)"><tspan
-     id="tspan76"
-     sodipodi:role="line"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-     x="0"
-     y="0">70</tspan></text>
-
-</g><path
-       inkscape:connector-curvature="0"
-       id="path78"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 51.1,230.95 3.15,0 m 293.1,0 -3.15,0" /><g
-       id="g80"
-       transform="translate(17.704316,0)"><text
-   id="text82"
-   transform="matrix(1,0,0,-1,21.4077,228.615)"><tspan
-     id="tspan84"
-     sodipodi:role="line"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-     x="0"
-     y="0">80</tspan></text>
-
-</g><path
-       inkscape:connector-curvature="0"
-       id="path86"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 93.4,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g88"><text
-   id="text90"
-   transform="matrix(1,0,0,-1,91.4543,13.0648)"><tspan
-     id="tspan92"
-     y="0"
-     x="0"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">0</tspan></text>
-
-</g><path
-       inkscape:connector-curvature="0"
-       id="path94"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 135.75,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g96"><text
-   id="text98"
-   transform="matrix(1,0,0,-1,133.804,13.0648)"><tspan
-     id="tspan100"
-     y="0"
-     x="0"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">1</tspan></text>
-
-</g><path
-       inkscape:connector-curvature="0"
-       id="path102"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 178.05,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g104"><text
-   id="text106"
-   transform="matrix(1,0,0,-1,176.104,13.0648)"><tspan
-     id="tspan108"
-     y="0"
-     x="0"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">2</tspan></text>
-
-</g><path
-       inkscape:connector-curvature="0"
-       id="path110"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 220.4,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g112"><text
-   id="text114"
-   transform="matrix(1,0,0,-1,218.454,13.0648)"><tspan
-     id="tspan116"
-     y="0"
-     x="0"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">3</tspan></text>
-
-</g><path
-       inkscape:connector-curvature="0"
-       id="path118"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 262.7,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g120"><text
-   id="text122"
-   transform="matrix(1,0,0,-1,260.754,13.0648)"><tspan
-     id="tspan124"
-     y="0"
-     x="0"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">4</tspan></text>
-
-</g><path
-       inkscape:connector-curvature="0"
-       id="path126"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 305.05,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g128"
-       transform="translate(-1.913543,0)"><text
-   id="text130"
-   transform="matrix(1,0,0,-1,303.104,13.0648)"
-   style="font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans"><tspan
-     sodipodi:role="line"
-     id="tspan3169"
-     style="font-size:7px"
-     x="0"
-     y="0">≥5</tspan></text>
-
-</g><path
-       inkscape:connector-curvature="0"
-       id="path134"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 51.1,22.4 296.25,0 0,208.55 -296.25,0 0,-208.55 z" /><text
-       transform="matrix(0,1,1,0,0,0)"
-       id="text138"
-       x="100.4465"
-       y="7.9351602"><tspan
-         style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-         x="100.4465"
-         y="7.9351602"
-         sodipodi:role="line"
-         id="tspan140">% of initial bases</tspan></text>
-<text
-       transform="scale(1,-1)"
-       id="text142"
-       x="171.58"
-       y="-2.5648401"><tspan
-         style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-         x="171.58 175.472 177.418 181.31 183.256 185.202 189.09399 191.425 193.756 197.64799 199.979 203.479 205.425 206.979 210.871 212.817 215.14799 219.03999 222.93201"
-         y="-2.5648401"
-         sodipodi:role="line"
-         id="tspan144"># of errors in read</tspan><tspan
-         style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-         x="171.58"
-         sodipodi:role="line"
-         id="tspan146"
-         y="-nan" /></text>
-<path
-       inkscape:connector-curvature="0"
-       id="path148"
-       style="fill:none;stroke:#ff0000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 51.1,22.4 296.25,0" /><path
-       inkscape:connector-curvature="0"
-       id="path156"
-       style="fill:#ff0000;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 319,222.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path158"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 319,222.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path160"
-       style="fill:#ff0000;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 82.05,22.4 3.55,0 0,55.2 -3.55,0 0,-55.2 z" /><path
-       inkscape:connector-curvature="0"
-       id="path162"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 82.05,22.4 3.5,0 0,55.15 -3.5,0 0,-55.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path164"
-       style="fill:#ff0000;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 124.4,22.4 3.5,0 0,24.45 -3.5,0 0,-24.45 z" /><path
-       inkscape:connector-curvature="0"
-       id="path166"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 124.4,22.4 3.45,0 0,24.4 -3.45,0 0,-24.4 z" /><path
-       inkscape:connector-curvature="0"
-       id="path168"
-       style="fill:#ff0000;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 166.7,22.4 3.55,0 0,13.1 -3.55,0 0,-13.1 z" /><path
-       inkscape:connector-curvature="0"
-       id="path170"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 166.7,22.4 3.5,0 0,13.05 -3.5,0 0,-13.05 z" /><path
-       inkscape:connector-curvature="0"
-       id="path172"
-       style="fill:#ff0000;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 209.05,22.4 3.5,0 0,9.3 -3.5,0 0,-9.3 z" /><path
-       inkscape:connector-curvature="0"
-       id="path174"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 209.05,22.4 3.45,0 0,9.25 -3.45,0 0,-9.25 z" /><path
-       inkscape:connector-curvature="0"
-       id="path176"
-       style="fill:#ff0000;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 251.35,22.4 3.5,0 0,6.3 -3.5,0 0,-6.3 z" /><path
-       inkscape:connector-curvature="0"
-       id="path178"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 251.35,22.4 3.45,0 0,6.25 -3.45,0 0,-6.25 z" /><path
-       inkscape:connector-curvature="0"
-       id="path180"
-       style="fill:#ff0000;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 293.7,22.4 3.5,0 0,93.1 -3.5,0 0,-93.1 z" /><path
-       inkscape:connector-curvature="0"
-       id="path182"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 293.7,22.4 3.45,0 0,93.05 -3.45,0 0,-93.05 z" /><path
-       inkscape:connector-curvature="0"
-       id="path190"
-       style="fill:#00ff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 319,215.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path192"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 319,215.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path194"
-       style="fill:#00ff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 85.9,22.4 3.55,0 0,148.6 -3.55,0 0,-148.6 z" /><path
-       inkscape:connector-curvature="0"
-       id="path196"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 85.9,22.4 3.5,0 0,148.55 -3.5,0 0,-148.55 z" /><path
-       inkscape:connector-curvature="0"
-       id="path198"
-       style="fill:#00ff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 128.25,22.4 3.5,0 0,12.6 -3.5,0 0,-12.6 z" /><path
-       inkscape:connector-curvature="0"
-       id="path200"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 128.25,22.4 3.45,0 0,12.55 -3.45,0 0,-12.55 z" /><path
-       inkscape:connector-curvature="0"
-       id="path202"
-       style="fill:#00ff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 170.55,22.4 3.5,0 0,5.6 -3.5,0 0,-5.6 z" /><path
-       inkscape:connector-curvature="0"
-       id="path204"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 170.55,22.4 3.45,0 0,5.55 -3.45,0 0,-5.55 z" /><path
-       inkscape:connector-curvature="0"
-       id="path206"
-       style="fill:#00ff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 212.9,22.4 3.5,0 0,3.65 -3.5,0 0,-3.65 z" /><path
-       inkscape:connector-curvature="0"
-       id="path208"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 212.9,22.4 3.45,0 0,3.6 -3.45,0 0,-3.6 z" /><path
-       inkscape:connector-curvature="0"
-       id="path210"
-       style="fill:#00ff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 255.2,22.4 3.5,0 0,2.2 -3.5,0 0,-2.2 z" /><path
-       inkscape:connector-curvature="0"
-       id="path212"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 255.2,22.4 3.45,0 0,2.15 -3.45,0 0,-2.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path214"
-       style="fill:#00ff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 297.55,22.4 3.5,0 0,44.85 -3.5,0 0,-44.85 z" /><path
-       inkscape:connector-curvature="0"
-       id="path216"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 297.55,22.4 3.45,0 0,44.8 -3.45,0 0,-44.8 z" /><path
-       inkscape:connector-curvature="0"
-       id="path224"
-       style="fill:#0000ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 319,208.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path226"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 319,208.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path228"
-       style="fill:#0000ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 89.75,22.4 3.55,0 0,160.4 -3.55,0 0,-160.4 z" /><path
-       inkscape:connector-curvature="0"
-       id="path230"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 89.75,22.4 3.5,0 0,160.35 -3.5,0 0,-160.35 z" /><path
-       inkscape:connector-curvature="0"
-       id="path232"
-       style="fill:#0000ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 132.1,22.4 3.5,0 0,4.6 -3.5,0 0,-4.6 z" /><path
-       inkscape:connector-curvature="0"
-       id="path234"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 132.1,22.4 3.45,0 0,4.55 -3.45,0 0,-4.55 z" /><path
-       inkscape:connector-curvature="0"
-       id="path236"
-       style="fill:#0000ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 174.4,22.4 3.5,0 0,3.35 -3.5,0 0,-3.35 z" /><path
-       inkscape:connector-curvature="0"
-       id="path238"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 174.4,22.4 3.45,0 0,3.3 -3.45,0 0,-3.3 z" /><path
-       inkscape:connector-curvature="0"
-       id="path240"
-       style="fill:#0000ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 216.75,22.4 3.5,0 0,3 -3.5,0 0,-3 z" /><path
-       inkscape:connector-curvature="0"
-       id="path242"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 216.75,22.4 3.45,0 0,2.95 -3.45,0 0,-2.95 z" /><path
-       inkscape:connector-curvature="0"
-       id="path244"
-       style="fill:#0000ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 259.05,22.4 3.5,0 0,2.45 -3.5,0 0,-2.45 z" /><path
-       inkscape:connector-curvature="0"
-       id="path246"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 259.05,22.4 3.45,0 0,2.4 -3.45,0 0,-2.4 z" /><path
-       inkscape:connector-curvature="0"
-       id="path248"
-       style="fill:#0000ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 301.35,22.4 3.55,0 0,51.4 -3.55,0 0,-51.4 z" /><path
-       inkscape:connector-curvature="0"
-       id="path250"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 301.35,22.4 3.5,0 0,51.35 -3.5,0 0,-51.35 z" /><path
-       inkscape:connector-curvature="0"
-       id="path258"
-       style="fill:#ff00ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 319,201.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path260"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 319,201.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path262"
-       style="fill:#ff00ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 93.6,22.4 3.55,0 0,153.55 -3.55,0 0,-153.55 z" /><path
-       inkscape:connector-curvature="0"
-       id="path264"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 93.6,22.4 3.5,0 0,153.5 -3.5,0 0,-153.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path266"
-       style="fill:#ff00ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 135.95,22.4 3.5,0 0,2.6 -3.5,0 0,-2.6 z" /><path
-       inkscape:connector-curvature="0"
-       id="path268"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 135.95,22.4 3.45,0 0,2.55 -3.45,0 0,-2.55 z" /><path
-       inkscape:connector-curvature="0"
-       id="path270"
-       style="fill:#ff00ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 178.25,22.4 3.5,0 0,1.15 -3.5,0 0,-1.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path272"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 178.25,22.4 3.45,0 0,1.1 -3.45,0 0,-1.1 z" /><path
-       inkscape:connector-curvature="0"
-       id="path274"
-       style="fill:#ff00ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 220.6,22.4 3.5,0 0,0.75 -3.5,0 0,-0.75 z" /><path
-       inkscape:connector-curvature="0"
-       id="path276"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 220.6,22.4 3.45,0 0,0.7 -3.45,0 0,-0.7 z" /><path
-       inkscape:connector-curvature="0"
-       id="path278"
-       style="fill:#ff00ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 262.9,22.4 3.5,0 0,0.45 -3.5,0 0,-0.45 z" /><path
-       inkscape:connector-curvature="0"
-       id="path280"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 262.9,22.4 3.45,0 0,0.4 -3.45,0 0,-0.4 z" /><path
-       inkscape:connector-curvature="0"
-       id="path282"
-       style="fill:#ff00ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 305.2,22.4 3.55,0 0,52.15 -3.55,0 0,-52.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path284"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 305.2,22.4 3.5,0 0,52.1 -3.5,0 0,-52.1 z" /><path
-       inkscape:connector-curvature="0"
-       id="path292"
-       style="fill:#00ffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 319,194.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path294"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 319,194.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path296"
-       style="fill:#00ffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 97.45,22.4 3.5,0 0,127.85 -3.5,0 0,-127.85 z" /><path
-       inkscape:connector-curvature="0"
-       id="path298"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 97.45,22.4 3.45,0 0,127.8 -3.45,0 0,-127.8 z" /><path
-       inkscape:connector-curvature="0"
-       id="path300"
-       style="fill:#00ffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 139.8,22.4 3.5,0 0,12.5 -3.5,0 0,-12.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path302"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 139.8,22.4 3.45,0 0,12.45 -3.45,0 0,-12.45 z" /><path
-       inkscape:connector-curvature="0"
-       id="path304"
-       style="fill:#00ffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 182.1,22.4 3.5,0 0,5.15 -3.5,0 0,-5.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path306"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 182.1,22.4 3.45,0 0,5.1 -3.45,0 0,-5.1 z" /><path
-       inkscape:connector-curvature="0"
-       id="path308"
-       style="fill:#00ffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 224.45,22.4 3.5,0 0,3.95 -3.5,0 0,-3.95 z" /><path
-       inkscape:connector-curvature="0"
-       id="path310"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 224.45,22.4 3.45,0 0,3.9 -3.45,0 0,-3.9 z" /><path
-       inkscape:connector-curvature="0"
-       id="path312"
-       style="fill:#00ffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 266.75,22.4 3.5,0 0,2.05 -3.5,0 0,-2.05 z" /><path
-       inkscape:connector-curvature="0"
-       id="path314"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 266.75,22.4 3.45,0 0,2 -3.45,0 0,-2 z" /><path
-       inkscape:connector-curvature="0"
-       id="path316"
-       style="fill:#00ffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 309.05,22.4 3.55,0 0,20 -3.55,0 0,-20 z" /><path
-       inkscape:connector-curvature="0"
-       id="path318"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 309.05,22.4 3.5,0 0,19.95 -3.5,0 0,-19.95 z" /><g
-       id="g3233"><g
-         id="g150"><text
-   y="-221.965"
-   x="277.01678"
-   style="font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans"
-   transform="scale(1,-1)"
-   id="text152"><tspan
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans"
-     x="277.01678"
-     y="-221.965"
-     sodipodi:role="line"
-     id="tspan154">Uncorrected</tspan></text>
-
-</g><g
-         transform="translate(-2.9455708,0)"
-         id="g184"><text
-   transform="matrix(1,0,0,-1,297.679,214.965)"
-   id="text186"><tspan
-     y="0"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-     x="0"
-     sodipodi:role="line"
-     id="tspan188">ECHO</tspan></text>
-
-</g><g
-         transform="translate(-3.6618677,0)"
-         id="g218"><text
-   transform="matrix(1,0,0,-1,298.071,207.965)"
-   id="text220"><tspan
-     y="0"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-     x="0"
-     sodipodi:role="line"
-     id="tspan222">HiTEC</tspan></text>
-
-</g><g
-         transform="translate(0.78094482,0)"
-         id="g252"><text
-   transform="matrix(1,0,0,-1,297.686,200.965)"
-   id="text254"><tspan
-     y="0"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-     x="0"
-     sodipodi:role="line"
-     id="tspan256">Coral</tspan></text>
-
-</g><g
-         transform="translate(8.0000229,0)"
-         id="g286"><text
-   transform="matrix(1,0,0,-1,286.395,193.965)"
-   id="text288"><tspan
-     y="0"
-     x="0"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-     sodipodi:role="line"
-     id="tspan290">Quake</tspan></text>
-
-</g><g
-         transform="translate(-0.36246143,0)"
-         id="g320"><text
-   transform="matrix(1,0,0,-1,289.125,186.965)"
-   id="text322"><tspan
-     y="0"
-     x="0"
-     style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-     sodipodi:role="line"
-     id="tspan324">QuorUM</tspan></text>
-
-</g></g><path
-       inkscape:connector-curvature="0"
-       id="path326"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 319,187.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path328"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 319,187.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path330"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 101.3,22.4 3.5,0 0,202.45 -3.5,0 0,-202.45 z" /><path
-       inkscape:connector-curvature="0"
-       id="path332"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 101.3,22.4 3.45,0 0,202.4 -3.45,0 0,-202.4 z" /><path
-       inkscape:connector-curvature="0"
-       id="path334"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 143.65,22.4 3.5,0 0,1 -3.5,0 0,-1 z" /><path
-       inkscape:connector-curvature="0"
-       id="path336"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 143.65,22.4 3.45,0 0,0.95 -3.45,0 0,-0.95 z" /><path
-       inkscape:connector-curvature="0"
-       id="path338"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 185.95,22.4 3.5,0 0,0.35 -3.5,0 0,-0.35 z" /><path
-       inkscape:connector-curvature="0"
-       id="path340"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 185.95,22.4 3.45,0 0,0.3 -3.45,0 0,-0.3 z" /><path
-       inkscape:connector-curvature="0"
-       id="path342"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 228.25,22.4 3.55,0 0,0.2 -3.55,0 0,-0.2 z" /><path
-       inkscape:connector-curvature="0"
-       id="path344"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 228.25,22.4 3.5,0 0,0.15 -3.5,0 0,-0.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path346"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 270.6,22.4 3.5,0 0,0.1 -3.5,0 0,-0.1 z" /><path
-       inkscape:connector-curvature="0"
-       id="path348"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 270.6,22.4 3.45,0 0,0.05 -3.45,0 0,-0.05 z" /><path
-       inkscape:connector-curvature="0"
-       id="path350"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 312.9,22.4 3.55,0 0,0.9 -3.55,0 0,-0.9 z" /><path
-       inkscape:connector-curvature="0"
-       id="path352"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 312.9,22.4 3.5,0 0,0.85 -3.5,0 0,-0.85 z" /><path
-       inkscape:connector-curvature="0"
-       id="path354"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 51.1,22.4 296.25,0 0,208.55 -296.25,0 0,-208.55 z" /><text
-       xml:space="preserve"
-       style="font-size:6.4000001px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;line-height:125%;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans"
-       x="143.82031"
-       y="-243.97516"
-       id="text3173"
-       sodipodi:linespacing="125%"
-       transform="scale(1,-1)"><tspan
-         sodipodi:role="line"
-         id="tspan3175"
-         x="143.82031"
-         y="-243.97516">Percent of bases vs. # of errors in read</tspan></text>
-</g></svg>
\ No newline at end of file
diff --git a/poster_CSH_2012/error_vs_reads_histogram.pdf b/poster_CSH_2012/error_vs_reads_histogram.pdf
deleted file mode 100644
index a7d37c8..0000000
Binary files a/poster_CSH_2012/error_vs_reads_histogram.pdf and /dev/null differ
diff --git a/poster_CSH_2012/error_vs_reads_histogram.svg b/poster_CSH_2012/error_vs_reads_histogram.svg
deleted file mode 100644
index 493278e..0000000
--- a/poster_CSH_2012/error_vs_reads_histogram.svg
+++ /dev/null
@@ -1,692 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   id="svg2"
-   version="1.1"
-   inkscape:version="0.48.1 r9760"
-   width="450"
-   height="315"
-   xml:space="preserve"
-   sodipodi:docname="error_vs_reads_histogram.pdf"><metadata
-     id="metadata8"><rdf:RDF><cc:Work
-         rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><defs
-     id="defs6" /><sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1280"
-     inkscape:window-height="1004"
-     id="namedview4"
-     showgrid="false"
-     inkscape:zoom="1.85"
-     inkscape:cx="225"
-     inkscape:cy="169.99138"
-     inkscape:window-x="1280"
-     inkscape:window-y="0"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="g10" /><g
-     id="g10"
-     inkscape:groupmode="layer"
-     inkscape:label="error_vs_reads_histogram"
-     transform="matrix(1.25,0,0,-1.25,0,315)"><path
-       inkscape:connector-curvature="0"
-       id="path14"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 34.3,22.4 3.15,0 m 309.9,0 -3.15,0" /><g
-       id="g16"><text
-         id="text18"
-         transform="matrix(1,0,0,-1,26.2085,20.0648)"><tspan
-           id="tspan20"
-           y="0"
-           x="0"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">0</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path22"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 34.3,43.25 3.15,0 m 309.9,0 -3.15,0" /><g
-       id="g24"><text
-         id="text26"
-         transform="matrix(1,0,0,-1,20.371,40.9148)"><tspan
-           id="tspan28"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892 5.8379998"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">0.1</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path30"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 34.3,64.1 3.15,0 m 309.9,0 -3.15,0" /><g
-       id="g32"><text
-         id="text34"
-         transform="matrix(1,0,0,-1,20.371,61.7648)"><tspan
-           id="tspan36"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892 5.8379998"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">0.2</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path38"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 34.3,84.95 3.15,0 m 309.9,0 -3.15,0" /><g
-       id="g40"><text
-         id="text42"
-         transform="matrix(1,0,0,-1,20.371,82.6148)"><tspan
-           id="tspan44"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892 5.8379998"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">0.3</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path46"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 34.3,105.8 3.15,0 m 309.9,0 -3.15,0" /><g
-       id="g48"><text
-         id="text50"
-         transform="matrix(1,0,0,-1,20.371,103.465)"><tspan
-           id="tspan52"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892 5.8379998"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">0.4</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path54"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 34.3,126.7 3.15,0 m 309.9,0 -3.15,0" /><g
-       id="g56"><text
-         id="text58"
-         transform="matrix(1,0,0,-1,20.371,124.365)"><tspan
-           id="tspan60"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892 5.8379998"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">0.5</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path62"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 34.3,147.55 3.15,0 m 309.9,0 -3.15,0" /><g
-       id="g64"><text
-         id="text66"
-         transform="matrix(1,0,0,-1,20.371,145.215)"><tspan
-           id="tspan68"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892 5.8379998"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">0.6</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path70"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 34.3,168.4 3.15,0 m 309.9,0 -3.15,0" /><g
-       id="g72"><text
-         id="text74"
-         transform="matrix(1,0,0,-1,20.371,166.065)"><tspan
-           id="tspan76"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892 5.8379998"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">0.7</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path78"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 34.3,189.25 3.15,0 m 309.9,0 -3.15,0" /><g
-       id="g80"><text
-         id="text82"
-         transform="matrix(1,0,0,-1,20.371,186.915)"><tspan
-           id="tspan84"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892 5.8379998"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">0.8</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path86"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 34.3,210.1 3.15,0 m 309.9,0 -3.15,0" /><g
-       id="g88"><text
-         id="text90"
-         transform="matrix(1,0,0,-1,20.371,207.765)"><tspan
-           id="tspan92"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892 5.8379998"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">0.9</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path94"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 34.3,230.95 3.15,0 m 309.9,0 -3.15,0" /><g
-       id="g96"><text
-         id="text98"
-         transform="matrix(1,0,0,-1,26.2085,228.615)"><tspan
-           id="tspan100"
-           y="0"
-           x="0"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">1</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path102"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 79,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g104"><text
-         id="text106"
-         transform="matrix(1,0,0,-1,77.0543,13.0648)"><tspan
-           id="tspan108"
-           y="0"
-           x="0"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">0</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path110"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 123.75,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g112"><text
-         id="text114"
-         transform="matrix(1,0,0,-1,121.804,13.0648)"><tspan
-           id="tspan116"
-           y="0"
-           x="0"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">1</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path118"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 168.45,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g120"><text
-         id="text122"
-         transform="matrix(1,0,0,-1,166.504,13.0648)"><tspan
-           id="tspan124"
-           y="0"
-           x="0"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">2</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path126"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 213.2,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g128"><text
-         id="text130"
-         transform="matrix(1,0,0,-1,211.254,13.0648)"><tspan
-           id="tspan132"
-           y="0"
-           x="0"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">3</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path134"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 257.9,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g136"><text
-         id="text138"
-         transform="matrix(1,0,0,-1,255.954,13.0648)"><tspan
-           id="tspan140"
-           y="0"
-           x="0"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">4</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path142"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 302.65,22.4 0,3.15 m 0,205.4 0,-3.15" /><g
-       id="g144"><text
-         id="text146"
-         transform="matrix(1,0,0,-1,300.704,13.0648)"><tspan
-           id="tspan148"
-           y="0"
-           x="0"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">5</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path150"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 34.3,22.4 313.05,0 0,208.55 -313.05,0 0,-208.55 z" /><g
-       id="g152"><text
-         id="text154"
-         transform="matrix(0,1,1,0,7.93516,99.6105)"><tspan
-           id="tspan156"
-           sodipodi:role="line"
-           y="0"
-           x="0 6.223 8.1689997 12.061 14.007 15.953 19.844999 23.737 27.237 31.129 34.629002 36.575001 38.905998 42.798 46.689999 50.582001"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">% of bases reads</tspan></text>
-<text
-         id="text158"
-         transform="matrix(1,0,0,-1,163.18,2.56484)"><tspan
-           id="tspan160"
-           sodipodi:role="line"
-           y="0"
-           x="0 3.892 5.8379998 9.7299995 11.676 13.622 17.514 19.844999 22.176001 26.068001 28.399 31.899 33.845001 35.398998 39.291 41.237 43.568001 47.459999 51.352001"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"># of errors in read</tspan><tspan
-           id="tspan162"
-           sodipodi:role="line"
-           y="-236.55"
-           x="-34.431198 -29.762199 -25.870199 -23.5392 -20.0392 -16.1472 -12.2552 -10.3092 -8.3632002 -4.4712 -2.5251999 -0.57920003 3.3127999 7.2048001 10.7048 14.5968 18.0968 20.042801 23.542801 27.042801 28.9888 30.934799 34.826801 36.7728 40.664799 42.610802 44.556801 48.448799 50.7798 53.110802 57.0028 59.333801 62.833801 64.7798 66.333801 70.2258 72.171799 74.5028 78.394798 82.286797 86.178802"
-           style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica">Percent of bases vs. # of errors in reads</tspan></text>
-</g><path
-       inkscape:connector-curvature="0"
-       id="path164"
-       style="fill:none;stroke:#ff0000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 34.3,22.4 313.05,0" /><path
-       inkscape:connector-curvature="0"
-       id="path172"
-       style="fill:#ff0000;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 319,222.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path174"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 319,222.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path176"
-       style="fill:#ff0000;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 67.05,22.4 3.7,0 0,57.25 -3.7,0 0,-57.25 z" /><path
-       inkscape:connector-curvature="0"
-       id="path178"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 67.05,22.4 3.65,0 0,57.2 -3.65,0 0,-57.2 z" /><path
-       inkscape:connector-curvature="0"
-       id="path180"
-       style="fill:#ff0000;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 111.75,22.4 3.7,0 0,25.35 -3.7,0 0,-25.35 z" /><path
-       inkscape:connector-curvature="0"
-       id="path182"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 111.75,22.4 3.65,0 0,25.3 -3.65,0 0,-25.3 z" /><path
-       inkscape:connector-curvature="0"
-       id="path184"
-       style="fill:#ff0000;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 156.45,22.4 3.75,0 0,13.6 -3.75,0 0,-13.6 z" /><path
-       inkscape:connector-curvature="0"
-       id="path186"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 156.45,22.4 3.7,0 0,13.55 -3.7,0 0,-13.55 z" /><path
-       inkscape:connector-curvature="0"
-       id="path188"
-       style="fill:#ff0000;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 201.2,22.4 3.7,0 0,9.65 -3.7,0 0,-9.65 z" /><path
-       inkscape:connector-curvature="0"
-       id="path190"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 201.2,22.4 3.65,0 0,9.6 -3.65,0 0,-9.6 z" /><path
-       inkscape:connector-curvature="0"
-       id="path192"
-       style="fill:#ff0000;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 245.9,22.4 3.7,0 0,6.5 -3.7,0 0,-6.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path194"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 245.9,22.4 3.65,0 0,6.45 -3.65,0 0,-6.45 z" /><path
-       inkscape:connector-curvature="0"
-       id="path196"
-       style="fill:#ff0000;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 290.65,22.4 3.7,0 0,96.55 -3.7,0 0,-96.55 z" /><path
-       inkscape:connector-curvature="0"
-       id="path198"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 290.65,22.4 3.65,0 0,96.5 -3.65,0 0,-96.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path206"
-       style="fill:#00ff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 319,215.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path208"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 319,215.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path210"
-       style="fill:#00ff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 71.1,22.4 3.7,0 0,142.7 -3.7,0 0,-142.7 z" /><path
-       inkscape:connector-curvature="0"
-       id="path212"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 71.1,22.4 3.65,0 0,142.65 -3.65,0 0,-142.65 z" /><path
-       inkscape:connector-curvature="0"
-       id="path214"
-       style="fill:#00ff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 115.8,22.4 3.7,0 0,12.1 -3.7,0 0,-12.1 z" /><path
-       inkscape:connector-curvature="0"
-       id="path216"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 115.8,22.4 3.65,0 0,12.05 -3.65,0 0,-12.05 z" /><path
-       inkscape:connector-curvature="0"
-       id="path218"
-       style="fill:#00ff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 160.55,22.4 3.7,0 0,5.4 -3.7,0 0,-5.4 z" /><path
-       inkscape:connector-curvature="0"
-       id="path220"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 160.55,22.4 3.65,0 0,5.35 -3.65,0 0,-5.35 z" /><path
-       inkscape:connector-curvature="0"
-       id="path222"
-       style="fill:#00ff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 205.25,22.4 3.7,0 0,3.5 -3.7,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path224"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 205.25,22.4 3.65,0 0,3.45 -3.65,0 0,-3.45 z" /><path
-       inkscape:connector-curvature="0"
-       id="path226"
-       style="fill:#00ff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 250,22.4 3.7,0 0,2.1 -3.7,0 0,-2.1 z" /><path
-       inkscape:connector-curvature="0"
-       id="path228"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 250,22.4 3.65,0 0,2.05 -3.65,0 0,-2.05 z" /><path
-       inkscape:connector-curvature="0"
-       id="path230"
-       style="fill:#00ff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 294.7,22.4 3.7,0 0,43.05 -3.7,0 0,-43.05 z" /><path
-       inkscape:connector-curvature="0"
-       id="path232"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 294.7,22.4 3.65,0 0,43 -3.65,0 0,-43 z" /><path
-       inkscape:connector-curvature="0"
-       id="path240"
-       style="fill:#0000ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 319,208.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path242"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 319,208.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path244"
-       style="fill:#0000ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 75.15,22.4 3.7,0 0,148.75 -3.7,0 0,-148.75 z" /><path
-       inkscape:connector-curvature="0"
-       id="path246"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 75.15,22.4 3.65,0 0,148.7 -3.65,0 0,-148.7 z" /><path
-       inkscape:connector-curvature="0"
-       id="path248"
-       style="fill:#0000ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 119.9,22.4 3.7,0 0,4.25 -3.7,0 0,-4.25 z" /><path
-       inkscape:connector-curvature="0"
-       id="path250"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 119.9,22.4 3.65,0 0,4.2 -3.65,0 0,-4.2 z" /><path
-       inkscape:connector-curvature="0"
-       id="path252"
-       style="fill:#0000ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 164.6,22.4 3.7,0 0,3.1 -3.7,0 0,-3.1 z" /><path
-       inkscape:connector-curvature="0"
-       id="path254"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 164.6,22.4 3.65,0 0,3.05 -3.65,0 0,-3.05 z" /><path
-       inkscape:connector-curvature="0"
-       id="path256"
-       style="fill:#0000ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 209.3,22.4 3.75,0 0,2.8 -3.75,0 0,-2.8 z" /><path
-       inkscape:connector-curvature="0"
-       id="path258"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 209.3,22.4 3.7,0 0,2.75 -3.7,0 0,-2.75 z" /><path
-       inkscape:connector-curvature="0"
-       id="path260"
-       style="fill:#0000ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 254.05,22.4 3.7,0 0,2.3 -3.7,0 0,-2.3 z" /><path
-       inkscape:connector-curvature="0"
-       id="path262"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 254.05,22.4 3.65,0 0,2.25 -3.65,0 0,-2.25 z" /><path
-       inkscape:connector-curvature="0"
-       id="path264"
-       style="fill:#0000ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 298.75,22.4 3.75,0 0,47.65 -3.75,0 0,-47.65 z" /><path
-       inkscape:connector-curvature="0"
-       id="path266"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 298.75,22.4 3.7,0 0,47.6 -3.7,0 0,-47.6 z" /><path
-       inkscape:connector-curvature="0"
-       id="path274"
-       style="fill:#ff00ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 319,201.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path276"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 319,201.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path278"
-       style="fill:#ff00ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 79.2,22.4 3.75,0 0,152.25 -3.75,0 0,-152.25 z" /><path
-       inkscape:connector-curvature="0"
-       id="path280"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 79.2,22.4 3.7,0 0,152.2 -3.7,0 0,-152.2 z" /><path
-       inkscape:connector-curvature="0"
-       id="path282"
-       style="fill:#ff00ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 123.95,22.4 3.7,0 0,2.55 -3.7,0 0,-2.55 z" /><path
-       inkscape:connector-curvature="0"
-       id="path284"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 123.95,22.4 3.65,0 0,2.5 -3.65,0 0,-2.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path286"
-       style="fill:#ff00ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 168.65,22.4 3.75,0 0,1.15 -3.75,0 0,-1.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path288"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 168.65,22.4 3.7,0 0,1.1 -3.7,0 0,-1.1 z" /><path
-       inkscape:connector-curvature="0"
-       id="path290"
-       style="fill:#ff00ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 213.4,22.4 3.7,0 0,0.75 -3.7,0 0,-0.75 z" /><path
-       inkscape:connector-curvature="0"
-       id="path292"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 213.4,22.4 3.65,0 0,0.7 -3.65,0 0,-0.7 z" /><path
-       inkscape:connector-curvature="0"
-       id="path294"
-       style="fill:#ff00ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 258.1,22.4 3.7,0 0,0.45 -3.7,0 0,-0.45 z" /><path
-       inkscape:connector-curvature="0"
-       id="path296"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 258.1,22.4 3.65,0 0,0.4 -3.65,0 0,-0.4 z" /><path
-       inkscape:connector-curvature="0"
-       id="path298"
-       style="fill:#ff00ff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 302.85,22.4 3.7,0 0,51.7 -3.7,0 0,-51.7 z" /><path
-       inkscape:connector-curvature="0"
-       id="path300"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 302.85,22.4 3.65,0 0,51.65 -3.65,0 0,-51.65 z" /><path
-       inkscape:connector-curvature="0"
-       id="path308"
-       style="fill:#00ffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 319,194.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path310"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 319,194.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path312"
-       style="fill:#00ffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 83.3,22.4 3.7,0 0,155.7 -3.7,0 0,-155.7 z" /><path
-       inkscape:connector-curvature="0"
-       id="path314"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 83.3,22.4 3.65,0 0,155.65 -3.65,0 0,-155.65 z" /><path
-       inkscape:connector-curvature="0"
-       id="path316"
-       style="fill:#00ffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 128,22.4 3.7,0 0,15.2 -3.7,0 0,-15.2 z" /><path
-       inkscape:connector-curvature="0"
-       id="path318"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 128,22.4 3.65,0 0,15.15 -3.65,0 0,-15.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path320"
-       style="fill:#00ffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 172.75,22.4 3.7,0 0,6.3 -3.7,0 0,-6.3 z" /><path
-       inkscape:connector-curvature="0"
-       id="path322"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 172.75,22.4 3.65,0 0,6.25 -3.65,0 0,-6.25 z" /><path
-       inkscape:connector-curvature="0"
-       id="path324"
-       style="fill:#00ffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 217.45,22.4 3.7,0 0,4.8 -3.7,0 0,-4.8 z" /><path
-       inkscape:connector-curvature="0"
-       id="path326"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 217.45,22.4 3.65,0 0,4.75 -3.65,0 0,-4.75 z" /><path
-       inkscape:connector-curvature="0"
-       id="path328"
-       style="fill:#00ffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 262.2,22.4 3.7,0 0,2.5 -3.7,0 0,-2.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path330"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 262.2,22.4 3.65,0 0,2.45 -3.65,0 0,-2.45 z" /><path
-       inkscape:connector-curvature="0"
-       id="path332"
-       style="fill:#00ffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 306.9,22.4 3.7,0 0,24.35 -3.7,0 0,-24.35 z" /><path
-       inkscape:connector-curvature="0"
-       id="path334"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 306.9,22.4 3.65,0 0,24.3 -3.65,0 0,-24.3 z" /><path
-       inkscape:connector-curvature="0"
-       id="path342"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 319,187.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path344"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 319,187.55 19.95,0 0,3.5 -19.95,0 0,-3.5 z" /><path
-       inkscape:connector-curvature="0"
-       id="path346"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 87.35,22.4 3.7,0 0,206.25 -3.7,0 0,-206.25 z" /><path
-       inkscape:connector-curvature="0"
-       id="path348"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 87.35,22.4 3.65,0 0,206.2 -3.65,0 0,-206.2 z" /><path
-       inkscape:connector-curvature="0"
-       id="path350"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 132.1,22.4 3.7,0 0,1 -3.7,0 0,-1 z" /><path
-       inkscape:connector-curvature="0"
-       id="path352"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 132.1,22.4 3.65,0 0,0.95 -3.65,0 0,-0.95 z" /><path
-       inkscape:connector-curvature="0"
-       id="path354"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 176.8,22.4 3.7,0 0,0.35 -3.7,0 0,-0.35 z" /><path
-       inkscape:connector-curvature="0"
-       id="path356"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 176.8,22.4 3.65,0 0,0.3 -3.65,0 0,-0.3 z" /><path
-       inkscape:connector-curvature="0"
-       id="path358"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 221.5,22.4 3.75,0 0,0.2 -3.75,0 0,-0.2 z" /><path
-       inkscape:connector-curvature="0"
-       id="path360"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 221.5,22.4 3.7,0 0,0.15 -3.7,0 0,-0.15 z" /><path
-       inkscape:connector-curvature="0"
-       id="path362"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 266.25,22.4 3.7,0 0,0.1 -3.7,0 0,-0.1 z" /><path
-       inkscape:connector-curvature="0"
-       id="path364"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 266.25,22.4 3.65,0 0,0.05 -3.65,0 0,-0.05 z" /><path
-       inkscape:connector-curvature="0"
-       id="path366"
-       style="fill:#ffff00;fill-opacity:1;fill-rule:nonzero;stroke:none"
-       d="m 310.95,22.4 3.7,0 0,0.9 -3.7,0 0,-0.9 z" /><path
-       inkscape:connector-curvature="0"
-       id="path368"
-       style="fill:none;stroke:#000000;stroke-width:0.75;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 310.95,22.4 3.65,0 0,0.85 -3.65,0 0,-0.85 z" /><path
-       inkscape:connector-curvature="0"
-       id="path370"
-       style="fill:none;stroke:#000000;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:3.79999995;stroke-opacity:1;stroke-dasharray:none"
-       d="m 34.3,22.4 313.05,0 0,208.55 -313.05,0 0,-208.55 z" /><g
-       transform="translate(1.6343621,-0.09192828)"
-       id="g3540"><g
-         id="g150"><text
-           y="-221.965"
-           x="277.01678"
-           style="font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans"
-           transform="scale(1,-1)"
-           id="text152"><tspan
-             style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans"
-             x="277.01678"
-             y="-221.965"
-             sodipodi:role="line"
-             id="tspan154">Uncorrected</tspan></text>
-</g><g
-         transform="translate(1.3991094,0)"
-         id="g184"><text
-           transform="matrix(1,0,0,-1,297.679,214.965)"
-           id="text186"><tspan
-             y="0"
-             style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-             x="0"
-             sodipodi:role="line"
-             id="tspan188">Echo</tspan></text>
-</g><g
-         transform="translate(0.8552969,0)"
-         id="g218"><text
-           transform="matrix(1,0,0,-1,298.071,207.965)"
-           id="text220"><tspan
-             y="0"
-             style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-             x="0"
-             sodipodi:role="line"
-             id="tspan222">Hitec</tspan></text>
-</g><g
-         transform="translate(0.7809219,0)"
-         id="g252"><text
-           transform="matrix(1,0,0,-1,297.686,200.965)"
-           id="text254"><tspan
-             y="0"
-             style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-             x="0"
-             sodipodi:role="line"
-             id="tspan256">Coral</tspan></text>
-</g><g
-         transform="translate(8,0)"
-         id="g286"><text
-           transform="matrix(1,0,0,-1,286.395,193.965)"
-           id="text288"><tspan
-             y="0"
-             x="0"
-             style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-             sodipodi:role="line"
-             id="tspan290">Quake</tspan></text>
-</g><g
-         transform="translate(0.792625,0)"
-         id="g320"><text
-           transform="matrix(1,0,0,-1,289.125,186.965)"
-           id="text322"><tspan
-             y="0"
-             x="0"
-             style="font-size:7px;font-variant:normal;font-weight:normal;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-family:Helvetica;-inkscape-font-specification:Helvetica"
-             sodipodi:role="line"
-             id="tspan324">Quorum</tspan></text>
-</g></g></g></svg>
\ No newline at end of file
diff --git a/quorum_easy_install.in b/quorum_easy_install.in
deleted file mode 100755
index 1c00916..0000000
--- a/quorum_easy_install.in
+++ /dev/null
@@ -1,44 +0,0 @@
-#! /bin/sh
-# Next line is a comment for make but executed by /bin/sh \
-exec make -f "$0" "$@"
-
-PREFIX = $(shell pwd)
-WGET = $(shell which wget 2>/dev/null)
-CURL = $(shell which curl 2>/dev/null)
-DOWNLOADER = $(if $(WGET), $(WGET) -O, $(if $(CURL), $(CURL) -o, $(error Error: No wget or curl found in PATH)))
-
-JF_VERSION = @JELLYFISH_VERSION@
-JF_URL = ftp://ftp.genome.umd.edu/pub/jellyfish/jellyfish-$(JF_VERSION).tar.gz
-
-QUORUM_VERSION = @PACKAGE_VERSION@
-QUORUM_URL = ftp://ftp.genome.umd.edu/pub/quorum/quorum-$(QUORUM_VERSION).tar.gz
-
-all: info $(PREFIX)/bin/jellyfish $(PREFIX)/bin/quorum
-	@echo ************************************************************
-	@echo Installation successful
-	@echo For some help see: $(PREFIX)/bin/quorum --help
-	@echo ************************************************************
-
-.PHONY: info
-info:
-	@echo "Installing Jellyfish and Quorum in $(PREFIX)"
-
-jellyfish-$(JF_VERSION).tar.gz:
-	$(DOWNLOADER) $@.tmp $(JF_URL)
-	mv $@.tmp $@
-
-quorum-$(QUORUM_VERSION).tar.gz:
-	$(DOWNLOADER) $@.tmp $(QUORUM_URL)
-	mv $@.tmp $@
-
-%/configure: %.tar.gz
-	tar zxf $<
-	touch $@
-
-$(PREFIX)/bin/jellyfish: jellyfish-$(JF_VERSION)/configure
-	cd $(dir $<); ./configure --prefix=$(PREFIX)
-	$(MAKE) -C $(dir $<) install
-
-$(PREFIX)/bin/quorum: quorum-$(QUORUM_VERSION)/configure $(PREFIX)/bin/jellyfish
-	cd $(dir $<); ./configure --prefix=$(PREFIX) JELLYFISH_LIBS="-L$(PREFIX)/lib -ljellyfish-2.0" JELLYFISH_CFLAGS="-I$(PREFIX)/include/jellyfish-$(JF_VERSION)" JF_LIB_PATH="$(PREFIX)/lib" JELLYFISH="$(PREFIX)/bin/jellyfish"
-	$(MAKE) -C $(dir $<) install
diff --git a/src/create_database.cc b/src/create_database.cc
index 1b60cc6..6ac0cfa 100644
--- a/src/create_database.cc
+++ b/src/create_database.cc
@@ -55,7 +55,6 @@ public:
 
   virtual void start(int thid) {
     mer_dna m, rm;
-    size_t counted_high = 0, counted_low = 0;
 
     while(true) {
       read_parser::job job(parser_);
@@ -85,8 +84,6 @@ public:
           if(low_len >= mer_dna::k()) {
             if(!ary_.add(m < rm ? m : rm, high_len >= mer_dna::k()))
               throw std::runtime_error(err::msg() << "Hash is full");
-            counted_high += high_len >= mer_dna::k();
-            ++counted_low;
           }
         }
       }
diff --git a/src/create_database_cmdline.hpp b/src/create_database_cmdline.hpp
new file mode 100644
index 0000000..fdbab5f
--- /dev/null
+++ b/src/create_database_cmdline.hpp
@@ -0,0 +1,524 @@
+/***** This code was generated by Yaggo. Do not edit ******/
+
+/* Quorum
+ * Copyright (C) 2012  Genome group at University of Maryland.
+ * 
+ * This program is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, either version 3 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+
+#ifndef __CREATE_DATABASE_CMDLINE_HPP__
+#define __CREATE_DATABASE_CMDLINE_HPP__
+
+#include <stdint.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <getopt.h>
+#include <errno.h>
+#include <string.h>
+#include <stdexcept>
+#include <string>
+#include <limits>
+#include <vector>
+#include <iostream>
+#include <sstream>
+#include <memory>
+
+class create_database_cmdline {
+ // Boiler plate stuff. Conversion from string to other formats
+  static bool adjust_double_si_suffix(double &res, const char *suffix) {
+    if(*suffix == '\0')
+      return true;
+    if(*(suffix + 1) != '\0')
+      return false;
+
+    switch(*suffix) {
+    case 'a': res *= 1e-18; break;
+    case 'f': res *= 1e-15; break;
+    case 'p': res *= 1e-12; break;
+    case 'n': res *= 1e-9;  break;
+    case 'u': res *= 1e-6;  break;
+    case 'm': res *= 1e-3;  break;
+    case 'k': res *= 1e3;   break;
+    case 'M': res *= 1e6;   break;
+    case 'G': res *= 1e9;   break;
+    case 'T': res *= 1e12;  break;
+    case 'P': res *= 1e15;  break;
+    case 'E': res *= 1e18;  break;
+    default: return false;
+    }
+    return true;
+  }
+
+  static double conv_double(const char *str, ::std::string &err, bool si_suffix) {
+    char *endptr = 0;
+    errno = 0;
+    double res = strtod(str, &endptr);
+    if(endptr == str) {
+      err.assign("Invalid floating point string");
+      return (double)0.0;
+    }
+    if(errno) {
+      err.assign(strerror(errno));
+      return (double)0.0;
+    }
+    bool invalid =
+      si_suffix ? !adjust_double_si_suffix(res, endptr) : *endptr != '\0';
+    if(invalid) {
+      err.assign("Invalid character");
+      return (double)0.0;
+    }
+    return res;
+  }
+
+  static int conv_enum(const char* str, ::std::string& err, const char* const strs[]) {
+    int res = 0;
+    for(const char* const* cstr = strs; *cstr; ++cstr, ++res)
+      if(!strcmp(*cstr, str))
+        return res;
+    err += "Invalid constant '";
+    err += str;
+    err += "'. Expected one of { ";
+    for(const char* const* cstr = strs; *cstr; ++cstr) {
+      if(cstr != strs)
+        err += ", ";
+      err += *cstr;
+    }
+    err += " }";
+    return -1;
+  }
+
+  template<typename T>
+  static bool adjust_int_si_suffix(T &res, const char *suffix) {
+    if(*suffix == '\0')
+      return true;
+    if(*(suffix + 1) != '\0')
+      return false;
+
+    switch(*suffix) {
+    case 'k': res *= (T)1000; break;
+    case 'M': res *= (T)1000000; break;
+    case 'G': res *= (T)1000000000; break;
+    case 'T': res *= (T)1000000000000; break;
+    case 'P': res *= (T)1000000000000000; break;
+    case 'E': res *= (T)1000000000000000000; break;
+    default: return false;
+    }
+    return true;
+  }
+
+  template<typename T>
+  static T conv_int(const char *str, ::std::string &err, bool si_suffix) {
+    char *endptr = 0;
+    errno = 0;
+    long long int res = strtoll(str, &endptr, 0);
+    if(endptr == str) {
+      err.assign("Invalid signed int string");
+      return (T)0;
+    }
+    if(errno) {
+      err.assign(strerror(errno));
+      return (T)0;
+    }
+    bool invalid =
+      si_suffix ? !adjust_int_si_suffix(res, endptr) : *endptr != '\0';
+    if(invalid) {
+      err.assign("Invalid character");
+      return (T)0;
+    }
+    if(res > ::std::numeric_limits<T>::max() ||
+       res < ::std::numeric_limits<T>::min()) {
+      err.assign("Value out of range");
+      return (T)0;
+    }
+    return (T)res;
+  }
+
+  template<typename T>
+  static T conv_uint(const char *str, ::std::string &err, bool si_suffix) {
+    char *endptr = 0;
+    errno = 0;
+    while(isspace(*str)) { ++str; }
+    if(*str == '-') {
+      err.assign("Negative value");
+      return (T)0;
+    }
+    unsigned long long int res = strtoull(str, &endptr, 0);
+    if(endptr == str) {
+      err.assign("Invalid unsigned int string");
+      return (T)0;
+    }
+    if(errno) {
+      err.assign(strerror(errno));
+      return (T)0;
+    }
+    bool invalid =
+      si_suffix ? !adjust_int_si_suffix(res, endptr) : *endptr != '\0';
+    if(invalid) {
+      err.assign("Invalid character");
+      return (T)0;
+    }
+    if(res > ::std::numeric_limits<T>::max()) {
+      err.assign("Value out of range");
+      return (T)0;
+    }
+    return (T)res;
+  }
+
+  template<typename T>
+  static ::std::string vec_str(const std::vector<T> &vec) {
+    ::std::ostringstream os;
+    for(typename ::std::vector<T>::const_iterator it = vec.begin();
+        it != vec.end(); ++it) {
+      if(it != vec.begin())
+        os << ",";
+      os << *it;
+    }
+    return os.str();
+  }
+
+  class string : public ::std::string {
+  public:
+    string() : ::std::string() {}
+    explicit string(const ::std::string &s) : std::string(s) {}
+    explicit string(const char *s) : ::std::string(s) {}
+    int as_enum(const char* const strs[]) {
+      ::std::string err;
+      int res = conv_enum((const char*)this->c_str(), err, strs);
+      if(!err.empty())
+        throw ::std::runtime_error(err);
+      return res;
+    }
+
+
+    uint32_t as_uint32_suffix() const { return as_uint32(true); }
+    uint32_t as_uint32(bool si_suffix = false) const {
+      ::std::string err;
+      uint32_t res = conv_uint<uint32_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to uint32_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    uint64_t as_uint64_suffix() const { return as_uint64(true); }
+    uint64_t as_uint64(bool si_suffix = false) const {
+      ::std::string err;
+      uint64_t res = conv_uint<uint64_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to uint64_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    int32_t as_int32_suffix() const { return as_int32(true); }
+    int32_t as_int32(bool si_suffix = false) const {
+      ::std::string err;
+      int32_t res = conv_int<int32_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to int32_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    int64_t as_int64_suffix() const { return as_int64(true); }
+    int64_t as_int64(bool si_suffix = false) const {
+      ::std::string err;
+      int64_t res = conv_int<int64_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to int64_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    int as_int_suffix() const { return as_int(true); }
+    int as_int(bool si_suffix = false) const {
+      ::std::string err;
+      int res = conv_int<int>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to int_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    long as_long_suffix() const { return as_long(true); }
+    long as_long(bool si_suffix = false) const {
+      ::std::string err;
+      long res = conv_int<long>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to long_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    double as_double_suffix() const { return as_double(true); }
+    double as_double(bool si_suffix = false) const {
+      ::std::string err;
+      double res = conv_double((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to double_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+  };
+
+public:
+  uint64_t                       size_arg;
+  bool                           size_given;
+  uint32_t                       mer_arg;
+  bool                           mer_given;
+  uint32_t                       bits_arg;
+  bool                           bits_given;
+  uint32_t                       min_qual_value_arg;
+  bool                           min_qual_value_given;
+  string                         min_qual_char_arg;
+  bool                           min_qual_char_given;
+  uint32_t                       threads_arg;
+  bool                           threads_given;
+  const char *                   output_arg;
+  bool                           output_given;
+  int32_t                        reprobe_arg;
+  bool                           reprobe_given;
+  ::std::vector<const char *>    reads_arg;
+  typedef ::std::vector<const char *>::iterator reads_arg_it;
+  typedef ::std::vector<const char *>::const_iterator reads_arg_const_it;
+
+  enum {
+    START_OPT = 1000
+  };
+
+  create_database_cmdline() :
+    size_arg(0), size_given(false),
+    mer_arg(0), mer_given(false),
+    bits_arg(0), bits_given(false),
+    min_qual_value_arg(0), min_qual_value_given(false),
+    min_qual_char_arg(""), min_qual_char_given(false),
+    threads_arg((uint32_t)1), threads_given(false),
+    output_arg("combined_database"), output_given(false),
+    reprobe_arg((int32_t)126), reprobe_given(false),
+    reads_arg()
+  { }
+
+  create_database_cmdline(int argc, char* argv[]) :
+    size_arg(0), size_given(false),
+    mer_arg(0), mer_given(false),
+    bits_arg(0), bits_given(false),
+    min_qual_value_arg(0), min_qual_value_given(false),
+    min_qual_char_arg(""), min_qual_char_given(false),
+    threads_arg((uint32_t)1), threads_given(false),
+    output_arg("combined_database"), output_given(false),
+    reprobe_arg((int32_t)126), reprobe_given(false),
+    reads_arg()
+  { parse(argc, argv); }
+
+  void parse(int argc, char* argv[]) {
+    static struct option long_options[] = {
+      {"size", 1, 0, 's'},
+      {"mer", 1, 0, 'm'},
+      {"bits", 1, 0, 'b'},
+      {"min-qual-value", 1, 0, 'q'},
+      {"min-qual-char", 1, 0, 'Q'},
+      {"threads", 1, 0, 't'},
+      {"output", 1, 0, 'o'},
+      {"reprobe", 1, 0, 'p'},
+      {"help", 0, 0, 'h'},
+      {"usage", 0, 0, 'U'},
+      {"version", 0, 0, 'V'},
+      {0, 0, 0, 0}
+    };
+    static const char *short_options = "hVUs:m:b:q:Q:t:o:p:";
+
+    ::std::string err;
+#define CHECK_ERR(type,val,which) if(!err.empty()) { ::std::cerr << "Invalid " #type " '" << val << "' for [" which "]: " << err << "\n"; exit(1); }
+    while(true) {
+      int index = -1;
+      int c = getopt_long(argc, argv, short_options, long_options, &index);
+      if(c == -1) break;
+      switch(c) {
+      case ':':
+        ::std::cerr << "Missing required argument for "
+                  << (index == -1 ? ::std::string(1, (char)optopt) : std::string(long_options[index].name))
+                  << ::std::endl;
+        exit(1);
+      case 'h':
+        ::std::cout << usage() << "\n\n" << help() << std::endl;
+        exit(0);
+      case 'U':
+        ::std::cout << usage() << "\nUse --help for more information." << std::endl;
+        exit(0);
+      case 'V':
+        print_version();
+        exit(0);
+      case '?':
+        ::std::cerr << "Use --usage or --help for some help\n";
+        exit(1);
+      case 's':
+        size_given = true;
+        size_arg = conv_uint<uint64_t>((const char*)optarg, err, true);
+        CHECK_ERR(uint64_t, optarg, "-s, --size=uint64")
+        break;
+      case 'm':
+        mer_given = true;
+        mer_arg = conv_uint<uint32_t>((const char*)optarg, err, false);
+        CHECK_ERR(uint32_t, optarg, "-m, --mer=uint32")
+        break;
+      case 'b':
+        bits_given = true;
+        bits_arg = conv_uint<uint32_t>((const char*)optarg, err, false);
+        CHECK_ERR(uint32_t, optarg, "-b, --bits=uint32")
+        break;
+      case 'q':
+        min_qual_value_given = true;
+        min_qual_value_arg = conv_uint<uint32_t>((const char*)optarg, err, false);
+        CHECK_ERR(uint32_t, optarg, "-q, --min-qual-value=uint32")
+        break;
+      case 'Q':
+        min_qual_char_given = true;
+        min_qual_char_arg.assign(optarg);
+        break;
+      case 't':
+        threads_given = true;
+        threads_arg = conv_uint<uint32_t>((const char*)optarg, err, false);
+        CHECK_ERR(uint32_t, optarg, "-t, --threads=uint32")
+        break;
+      case 'o':
+        output_given = true;
+        output_arg = optarg;
+        break;
+      case 'p':
+        reprobe_given = true;
+        reprobe_arg = conv_int<int32_t>((const char*)optarg, err, false);
+        CHECK_ERR(int32_t, optarg, "-p, --reprobe=int32")
+        break;
+      }
+    }
+
+    // Check that required switches are present
+    if(!size_given)
+      error("[-s, --size=uint64] required switch");
+    if(!mer_given)
+      error("[-m, --mer=uint32] required switch");
+    if(!bits_given)
+      error("[-b, --bits=uint32] required switch");
+
+    // Check mutually exlusive switches
+    if(min_qual_char_given && min_qual_value_given)
+      error("Switches [-Q, --min-qual-char=string] and [-q, --min-qual-value=uint32] are mutually exclusive");
+
+    // Parse arguments
+    if(argc - optind < 1)
+      error("Requires at least 1 argument.");
+    for( ; optind < argc; ++optind) {
+      reads_arg.push_back(argv[optind]);
+    }
+  }
+  static const char * usage() { return "Usage: create_database_cmdline [options] reads:path+"; }
+  class error {
+    int code_;
+    std::ostringstream msg_;
+
+    // Select the correct version (GNU or XSI) version of
+    // strerror_r. strerror_ behaves like the GNU version of strerror_r,
+    // regardless of which version is provided by the system.
+    static const char* strerror__(char* buf, int res) {
+      return res != -1 ? buf : "Invalid error";
+    }
+    static const char* strerror__(char* buf, char* res) {
+      return res;
+    }
+    static const char* strerror_(int err, char* buf, size_t buflen) {
+      return strerror__(buf, strerror_r(err, buf, buflen));
+    }
+    struct no_t { };
+
+  public:
+    static no_t no;
+    error(int code = EXIT_FAILURE) : code_(code) { }
+    explicit error(const char* msg, int code = EXIT_FAILURE) : code_(code)
+      { msg_ << msg; }
+    error(const std::string& msg, int code = EXIT_FAILURE) : code_(code)
+      { msg_ << msg; }
+    error& operator<<(no_t) {
+      char buf[1024];
+      msg_ << ": " << strerror_(errno, buf, sizeof(buf));
+      return *this;
+    }
+    template<typename T>
+    error& operator<<(const T& x) { msg_ << x; return (*this); }
+    ~error() {
+      ::std::cerr << "Error: " << msg_.str() << "\n"
+                  << usage() << "\n"
+                  << "Use --help for more information"
+                  << ::std::endl;
+      exit(code_);
+    }
+  };
+  static const char * help() { return
+    "Create database of k-mers for quorum error corrector\n\nCreate k-mer database for quorum_error_correct\n\n"
+    "Options (default value in (), *required):\n"
+    " -s, --size=uint64                       *Initial hash size\n"
+    " -m, --mer=uint32                        *Mer length\n"
+    " -b, --bits=uint32                       *Bits for value field\n"
+    " -q, --min-qual-value=uint32              Min quality as an int\n"
+    " -Q, --min-qual-char=string               Min quality as a ASCII character\n"
+    " -t, --threads=uint32                     Number of threads (1)\n"
+    " -o, --output=path                        Output file (combined_database)\n"
+    " -p, --reprobe=int32                      Maximum number of reprobes (126)\n"
+    " -U, --usage                              Usage\n"
+    " -h, --help                               This message\n"
+    " -V, --version                            Version";
+  }
+  static const char* hidden() { return ""; }
+  void print_version(::std::ostream &os = std::cout) const {
+#ifndef PACKAGE_VERSION
+#define PACKAGE_VERSION "0.0.0"
+#endif
+    os << PACKAGE_VERSION << "\n";
+  }
+  void dump(::std::ostream &os = std::cout) {
+    os << "size_given:" << size_given << " size_arg:" << size_arg << "\n";
+    os << "mer_given:" << mer_given << " mer_arg:" << mer_arg << "\n";
+    os << "bits_given:" << bits_given << " bits_arg:" << bits_arg << "\n";
+    os << "min_qual_value_given:" << min_qual_value_given << " min_qual_value_arg:" << min_qual_value_arg << "\n";
+    os << "min_qual_char_given:" << min_qual_char_given << " min_qual_char_arg:" << min_qual_char_arg << "\n";
+    os << "threads_given:" << threads_given << " threads_arg:" << threads_arg << "\n";
+    os << "output_given:" << output_given << " output_arg:" << output_arg << "\n";
+    os << "reprobe_given:" << reprobe_given << " reprobe_arg:" << reprobe_arg << "\n";
+    os << "reads_arg:" << vec_str(reads_arg) << "\n";
+  }
+};
+#endif // __CREATE_DATABASE_CMDLINE_HPP__"
diff --git a/src/create_database_cmdline.yaggo b/src/create_database_cmdline.yaggo
deleted file mode 100644
index 01c62c8..0000000
--- a/src/create_database_cmdline.yaggo
+++ /dev/null
@@ -1,33 +0,0 @@
-purpose "Create database of k-mers for quorum error corrector"
-description "Create k-mer database for quorum_error_correct"
-#description <<EOS
-#To come.
-#EOS
-
-option("s", "size") {
-  description "Initial hash size"
-  uint64; suffix; required }
-option("m", "mer") {
-  description "Mer length"
-  uint32; required }
-option("b", "bits") {
-  description "Bits for value field"
-  uint32; required }
-option("q", "min-qual-value") {
-  description "Min quality as an int"
-  uint32 }
-option("Q", "min-qual-char") {
-  description "Min quality as a ASCII character"
-  string; conflict "min-qual-value" }
-option("t", "threads") {
-  description "Number of threads"
-  uint32; default 1 }
-option("o", "output") {
-  description "Output file"
-  c_string; typestr "path"; default "combined_database" }
-option("p", "reprobe") {
-  description "Maximum number of reprobes"
-  int32; default 126 }
-arg("reads") {
-  description "Read files"
-  c_string; multiple; typestr "path"; at_least 1}
diff --git a/src/err_log.hpp b/src/err_log.hpp
index 9e99a83..180a6ee 100644
--- a/src/err_log.hpp
+++ b/src/err_log.hpp
@@ -39,7 +39,7 @@ private:
     entry(type_t t, T p) : type(t), pos(p) {}
   };
 
-  struct greater_than_pos : std::unary_function<entry, bool> {
+  struct greater_than_pos {
     T pos;
     bool operator()(entry& e) { return e.pos >= *pos; } // Compare the raw value of pos, not using the operator>=
     greater_than_pos(T& pos_) : pos(pos_) { }
diff --git a/src/error_correct_reads.cc b/src/error_correct_reads.cc
index 559804b..54e12e7 100644
--- a/src/error_correct_reads.cc
+++ b/src/error_correct_reads.cc
@@ -161,9 +161,9 @@ public:
     std::unique_ptr<std::ostream> output(open_file(_prefix, ".fa", "/dev/fd/1"));
     // Multiplexers, same thing
     std::unique_ptr<jflib::o_multiplexer>
-      log_m(new jflib::o_multiplexer(details.get(), 3 * nb_threads, 1024));
+      log_m(new jflib::o_multiplexer(details.get(), 3 * (size_t)nb_threads, 1024));
     std::unique_ptr<jflib::o_multiplexer>
-      output_m(new jflib::o_multiplexer(output.get(), 3 * nb_threads, 1024));
+      output_m(new jflib::o_multiplexer(output.get(), 3 * (size_t)nb_threads, 1024));
     _log    = log_m.get();
     _output = output_m.get();
 
@@ -248,7 +248,6 @@ public:
     jflib::omstream details(_ec.log());
     kmer_t          mer, tmer;
 
-    uint64_t nb_reads = 0;
     while(true) {
       read_parser::job job(_ec.parser());
       if(job.is_empty()) break;
@@ -261,7 +260,6 @@ public:
         const char* const  seq_e    = seq_s + sequence.size();
         const char* const  qual_s   = job->data[i].qual.c_str();
 
-        nb_reads++;
         insure_length_buffer(sequence.size());
 
         const char* error = "";
diff --git a/src/error_correct_reads_cmdline.hpp b/src/error_correct_reads_cmdline.hpp
new file mode 100644
index 0000000..1952c20
--- /dev/null
+++ b/src/error_correct_reads_cmdline.hpp
@@ -0,0 +1,656 @@
+/***** This code was generated by Yaggo. Do not edit ******/
+
+/* Quorum
+ * Copyright (C) 2012  Genome group at University of Maryland.
+ * 
+ * This program is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, either version 3 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+
+#ifndef __ARGS_T_HPP__
+#define __ARGS_T_HPP__
+
+#include <stdint.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <getopt.h>
+#include <errno.h>
+#include <string.h>
+#include <stdexcept>
+#include <string>
+#include <limits>
+#include <vector>
+#include <iostream>
+#include <sstream>
+#include <memory>
+
+class args_t {
+ // Boiler plate stuff. Conversion from string to other formats
+  static bool adjust_double_si_suffix(double &res, const char *suffix) {
+    if(*suffix == '\0')
+      return true;
+    if(*(suffix + 1) != '\0')
+      return false;
+
+    switch(*suffix) {
+    case 'a': res *= 1e-18; break;
+    case 'f': res *= 1e-15; break;
+    case 'p': res *= 1e-12; break;
+    case 'n': res *= 1e-9;  break;
+    case 'u': res *= 1e-6;  break;
+    case 'm': res *= 1e-3;  break;
+    case 'k': res *= 1e3;   break;
+    case 'M': res *= 1e6;   break;
+    case 'G': res *= 1e9;   break;
+    case 'T': res *= 1e12;  break;
+    case 'P': res *= 1e15;  break;
+    case 'E': res *= 1e18;  break;
+    default: return false;
+    }
+    return true;
+  }
+
+  static double conv_double(const char *str, ::std::string &err, bool si_suffix) {
+    char *endptr = 0;
+    errno = 0;
+    double res = strtod(str, &endptr);
+    if(endptr == str) {
+      err.assign("Invalid floating point string");
+      return (double)0.0;
+    }
+    if(errno) {
+      err.assign(strerror(errno));
+      return (double)0.0;
+    }
+    bool invalid =
+      si_suffix ? !adjust_double_si_suffix(res, endptr) : *endptr != '\0';
+    if(invalid) {
+      err.assign("Invalid character");
+      return (double)0.0;
+    }
+    return res;
+  }
+
+  static int conv_enum(const char* str, ::std::string& err, const char* const strs[]) {
+    int res = 0;
+    for(const char* const* cstr = strs; *cstr; ++cstr, ++res)
+      if(!strcmp(*cstr, str))
+        return res;
+    err += "Invalid constant '";
+    err += str;
+    err += "'. Expected one of { ";
+    for(const char* const* cstr = strs; *cstr; ++cstr) {
+      if(cstr != strs)
+        err += ", ";
+      err += *cstr;
+    }
+    err += " }";
+    return -1;
+  }
+
+  template<typename T>
+  static bool adjust_int_si_suffix(T &res, const char *suffix) {
+    if(*suffix == '\0')
+      return true;
+    if(*(suffix + 1) != '\0')
+      return false;
+
+    switch(*suffix) {
+    case 'k': res *= (T)1000; break;
+    case 'M': res *= (T)1000000; break;
+    case 'G': res *= (T)1000000000; break;
+    case 'T': res *= (T)1000000000000; break;
+    case 'P': res *= (T)1000000000000000; break;
+    case 'E': res *= (T)1000000000000000000; break;
+    default: return false;
+    }
+    return true;
+  }
+
+  template<typename T>
+  static T conv_int(const char *str, ::std::string &err, bool si_suffix) {
+    char *endptr = 0;
+    errno = 0;
+    long long int res = strtoll(str, &endptr, 0);
+    if(endptr == str) {
+      err.assign("Invalid signed int string");
+      return (T)0;
+    }
+    if(errno) {
+      err.assign(strerror(errno));
+      return (T)0;
+    }
+    bool invalid =
+      si_suffix ? !adjust_int_si_suffix(res, endptr) : *endptr != '\0';
+    if(invalid) {
+      err.assign("Invalid character");
+      return (T)0;
+    }
+    if(res > ::std::numeric_limits<T>::max() ||
+       res < ::std::numeric_limits<T>::min()) {
+      err.assign("Value out of range");
+      return (T)0;
+    }
+    return (T)res;
+  }
+
+  template<typename T>
+  static T conv_uint(const char *str, ::std::string &err, bool si_suffix) {
+    char *endptr = 0;
+    errno = 0;
+    while(isspace(*str)) { ++str; }
+    if(*str == '-') {
+      err.assign("Negative value");
+      return (T)0;
+    }
+    unsigned long long int res = strtoull(str, &endptr, 0);
+    if(endptr == str) {
+      err.assign("Invalid unsigned int string");
+      return (T)0;
+    }
+    if(errno) {
+      err.assign(strerror(errno));
+      return (T)0;
+    }
+    bool invalid =
+      si_suffix ? !adjust_int_si_suffix(res, endptr) : *endptr != '\0';
+    if(invalid) {
+      err.assign("Invalid character");
+      return (T)0;
+    }
+    if(res > ::std::numeric_limits<T>::max()) {
+      err.assign("Value out of range");
+      return (T)0;
+    }
+    return (T)res;
+  }
+
+  template<typename T>
+  static ::std::string vec_str(const std::vector<T> &vec) {
+    ::std::ostringstream os;
+    for(typename ::std::vector<T>::const_iterator it = vec.begin();
+        it != vec.end(); ++it) {
+      if(it != vec.begin())
+        os << ",";
+      os << *it;
+    }
+    return os.str();
+  }
+
+  class string : public ::std::string {
+  public:
+    string() : ::std::string() {}
+    explicit string(const ::std::string &s) : std::string(s) {}
+    explicit string(const char *s) : ::std::string(s) {}
+    int as_enum(const char* const strs[]) {
+      ::std::string err;
+      int res = conv_enum((const char*)this->c_str(), err, strs);
+      if(!err.empty())
+        throw ::std::runtime_error(err);
+      return res;
+    }
+
+
+    uint32_t as_uint32_suffix() const { return as_uint32(true); }
+    uint32_t as_uint32(bool si_suffix = false) const {
+      ::std::string err;
+      uint32_t res = conv_uint<uint32_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to uint32_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    uint64_t as_uint64_suffix() const { return as_uint64(true); }
+    uint64_t as_uint64(bool si_suffix = false) const {
+      ::std::string err;
+      uint64_t res = conv_uint<uint64_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to uint64_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    int32_t as_int32_suffix() const { return as_int32(true); }
+    int32_t as_int32(bool si_suffix = false) const {
+      ::std::string err;
+      int32_t res = conv_int<int32_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to int32_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    int64_t as_int64_suffix() const { return as_int64(true); }
+    int64_t as_int64(bool si_suffix = false) const {
+      ::std::string err;
+      int64_t res = conv_int<int64_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to int64_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    int as_int_suffix() const { return as_int(true); }
+    int as_int(bool si_suffix = false) const {
+      ::std::string err;
+      int res = conv_int<int>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to int_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    long as_long_suffix() const { return as_long(true); }
+    long as_long(bool si_suffix = false) const {
+      ::std::string err;
+      long res = conv_int<long>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to long_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    double as_double_suffix() const { return as_double(true); }
+    double as_double(bool si_suffix = false) const {
+      ::std::string err;
+      double res = conv_double((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to double_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+  };
+
+public:
+  uint32_t                       thread_arg;
+  bool                           thread_given;
+  uint32_t                       min_count_arg;
+  bool                           min_count_given;
+  uint32_t                       skip_arg;
+  bool                           skip_given;
+  uint32_t                       good_arg;
+  bool                           good_given;
+  uint32_t                       anchor_count_arg;
+  bool                           anchor_count_given;
+  uint32_t                       window_arg;
+  bool                           window_given;
+  uint32_t                       error_arg;
+  bool                           error_given;
+  string                         output_arg;
+  bool                           output_given;
+  const char *                   contaminant_arg;
+  bool                           contaminant_given;
+  bool                           trim_contaminant_flag;
+  int32_t                        homo_trim_arg;
+  bool                           homo_trim_given;
+  bool                           gzip_flag;
+  bool                           no_mmap_flag;
+  double                         apriori_error_rate_arg;
+  bool                           apriori_error_rate_given;
+  double                         poisson_threshold_arg;
+  bool                           poisson_threshold_given;
+  uint32_t                       cutoff_arg;
+  bool                           cutoff_given;
+  uint32_t                       qual_cutoff_value_arg;
+  bool                           qual_cutoff_value_given;
+  string                         qual_cutoff_char_arg;
+  bool                           qual_cutoff_char_given;
+  bool                           no_discard_flag;
+  bool                           verbose_flag;
+  const char *                   db_arg;
+  ::std::vector<const char *>    sequence_arg;
+  typedef ::std::vector<const char *>::iterator sequence_arg_it;
+  typedef ::std::vector<const char *>::const_iterator sequence_arg_const_it;
+
+  enum {
+    START_OPT = 1000,
+    CONTAMINANT_OPT,
+    TRIM_CONTAMINANT_OPT,
+    HOMO_TRIM_OPT,
+    GZIP_OPT,
+    APRIORI_ERROR_RATE_OPT,
+    POISSON_THRESHOLD_OPT
+  };
+
+  args_t() :
+    thread_arg((uint32_t)1), thread_given(false),
+    min_count_arg((uint32_t)1), min_count_given(false),
+    skip_arg((uint32_t)1), skip_given(false),
+    good_arg((uint32_t)2), good_given(false),
+    anchor_count_arg((uint32_t)3), anchor_count_given(false),
+    window_arg((uint32_t)10), window_given(false),
+    error_arg((uint32_t)3), error_given(false),
+    output_arg("error_corrected"), output_given(false),
+    contaminant_arg(""), contaminant_given(false),
+    trim_contaminant_flag(false),
+    homo_trim_arg(0), homo_trim_given(false),
+    gzip_flag(false),
+    no_mmap_flag(false),
+    apriori_error_rate_arg((double)0.01), apriori_error_rate_given(false),
+    poisson_threshold_arg((double)1.0e-06), poisson_threshold_given(false),
+    cutoff_arg(0), cutoff_given(false),
+    qual_cutoff_value_arg(0), qual_cutoff_value_given(false),
+    qual_cutoff_char_arg(""), qual_cutoff_char_given(false),
+    no_discard_flag(false),
+    verbose_flag(false),
+    db_arg(""),
+    sequence_arg()
+  { }
+
+  args_t(int argc, char* argv[]) :
+    thread_arg((uint32_t)1), thread_given(false),
+    min_count_arg((uint32_t)1), min_count_given(false),
+    skip_arg((uint32_t)1), skip_given(false),
+    good_arg((uint32_t)2), good_given(false),
+    anchor_count_arg((uint32_t)3), anchor_count_given(false),
+    window_arg((uint32_t)10), window_given(false),
+    error_arg((uint32_t)3), error_given(false),
+    output_arg("error_corrected"), output_given(false),
+    contaminant_arg(""), contaminant_given(false),
+    trim_contaminant_flag(false),
+    homo_trim_arg(0), homo_trim_given(false),
+    gzip_flag(false),
+    no_mmap_flag(false),
+    apriori_error_rate_arg((double)0.01), apriori_error_rate_given(false),
+    poisson_threshold_arg((double)1.0e-06), poisson_threshold_given(false),
+    cutoff_arg(0), cutoff_given(false),
+    qual_cutoff_value_arg(0), qual_cutoff_value_given(false),
+    qual_cutoff_char_arg(""), qual_cutoff_char_given(false),
+    no_discard_flag(false),
+    verbose_flag(false),
+    db_arg(""),
+    sequence_arg()
+  { parse(argc, argv); }
+
+  void parse(int argc, char* argv[]) {
+    static struct option long_options[] = {
+      {"thread", 1, 0, 't'},
+      {"min-count", 1, 0, 'm'},
+      {"skip", 1, 0, 's'},
+      {"good", 1, 0, 'g'},
+      {"anchor-count", 1, 0, 'a'},
+      {"window", 1, 0, 'w'},
+      {"error", 1, 0, 'e'},
+      {"output", 1, 0, 'o'},
+      {"contaminant", 1, 0, CONTAMINANT_OPT},
+      {"trim-contaminant", 0, 0, TRIM_CONTAMINANT_OPT},
+      {"homo-trim", 1, 0, HOMO_TRIM_OPT},
+      {"gzip", 0, 0, GZIP_OPT},
+      {"no-mmap", 0, 0, 'M'},
+      {"apriori-error-rate", 1, 0, APRIORI_ERROR_RATE_OPT},
+      {"poisson-threshold", 1, 0, POISSON_THRESHOLD_OPT},
+      {"cutoff", 1, 0, 'p'},
+      {"qual-cutoff-value", 1, 0, 'q'},
+      {"qual-cutoff-char", 1, 0, 'Q'},
+      {"no-discard", 0, 0, 'd'},
+      {"verbose", 0, 0, 'v'},
+      {"help", 0, 0, 'h'},
+      {"usage", 0, 0, 'U'},
+      {"version", 0, 0, 'V'},
+      {0, 0, 0, 0}
+    };
+    static const char *short_options = "hVUt:m:s:g:a:w:e:o:Mp:q:Q:dv";
+
+    ::std::string err;
+#define CHECK_ERR(type,val,which) if(!err.empty()) { ::std::cerr << "Invalid " #type " '" << val << "' for [" which "]: " << err << "\n"; exit(1); }
+    while(true) {
+      int index = -1;
+      int c = getopt_long(argc, argv, short_options, long_options, &index);
+      if(c == -1) break;
+      switch(c) {
+      case ':':
+        ::std::cerr << "Missing required argument for "
+                  << (index == -1 ? ::std::string(1, (char)optopt) : std::string(long_options[index].name))
+                  << ::std::endl;
+        exit(1);
+      case 'h':
+        ::std::cout << usage() << "\n\n" << help() << std::endl;
+        exit(0);
+      case 'U':
+        ::std::cout << usage() << "\nUse --help for more information." << std::endl;
+        exit(0);
+      case 'V':
+        print_version();
+        exit(0);
+      case '?':
+        ::std::cerr << "Use --usage or --help for some help\n";
+        exit(1);
+      case 't':
+        thread_given = true;
+        thread_arg = conv_uint<uint32_t>((const char*)optarg, err, false);
+        CHECK_ERR(uint32_t, optarg, "-t, --thread=uint32")
+        break;
+      case 'm':
+        min_count_given = true;
+        min_count_arg = conv_uint<uint32_t>((const char*)optarg, err, false);
+        CHECK_ERR(uint32_t, optarg, "-m, --min-count=uint32")
+        break;
+      case 's':
+        skip_given = true;
+        skip_arg = conv_uint<uint32_t>((const char*)optarg, err, false);
+        CHECK_ERR(uint32_t, optarg, "-s, --skip=uint32")
+        break;
+      case 'g':
+        good_given = true;
+        good_arg = conv_uint<uint32_t>((const char*)optarg, err, false);
+        CHECK_ERR(uint32_t, optarg, "-g, --good=uint32")
+        break;
+      case 'a':
+        anchor_count_given = true;
+        anchor_count_arg = conv_uint<uint32_t>((const char*)optarg, err, false);
+        CHECK_ERR(uint32_t, optarg, "-a, --anchor-count=uint32")
+        break;
+      case 'w':
+        window_given = true;
+        window_arg = conv_uint<uint32_t>((const char*)optarg, err, false);
+        CHECK_ERR(uint32_t, optarg, "-w, --window=uint32")
+        break;
+      case 'e':
+        error_given = true;
+        error_arg = conv_uint<uint32_t>((const char*)optarg, err, false);
+        CHECK_ERR(uint32_t, optarg, "-e, --error=uint32")
+        break;
+      case 'o':
+        output_given = true;
+        output_arg.assign(optarg);
+        break;
+      case CONTAMINANT_OPT:
+        contaminant_given = true;
+        contaminant_arg = optarg;
+        break;
+      case TRIM_CONTAMINANT_OPT:
+        trim_contaminant_flag = true;
+        break;
+      case HOMO_TRIM_OPT:
+        homo_trim_given = true;
+        homo_trim_arg = conv_int<int32_t>((const char*)optarg, err, false);
+        CHECK_ERR(int32_t, optarg, "    --homo-trim=int32")
+        break;
+      case GZIP_OPT:
+        gzip_flag = true;
+        break;
+      case 'M':
+        no_mmap_flag = true;
+        break;
+      case APRIORI_ERROR_RATE_OPT:
+        apriori_error_rate_given = true;
+        apriori_error_rate_arg = conv_double((const char*)optarg, err, false);
+        CHECK_ERR(double_t, optarg, "    --apriori-error-rate=double")
+        break;
+      case POISSON_THRESHOLD_OPT:
+        poisson_threshold_given = true;
+        poisson_threshold_arg = conv_double((const char*)optarg, err, false);
+        CHECK_ERR(double_t, optarg, "    --poisson-threshold=double")
+        break;
+      case 'p':
+        cutoff_given = true;
+        cutoff_arg = conv_uint<uint32_t>((const char*)optarg, err, false);
+        CHECK_ERR(uint32_t, optarg, "-p, --cutoff=uint32")
+        break;
+      case 'q':
+        qual_cutoff_value_given = true;
+        qual_cutoff_value_arg = conv_uint<uint32_t>((const char*)optarg, err, false);
+        CHECK_ERR(uint32_t, optarg, "-q, --qual-cutoff-value=uint32")
+        break;
+      case 'Q':
+        qual_cutoff_char_given = true;
+        qual_cutoff_char_arg.assign(optarg);
+        break;
+      case 'd':
+        no_discard_flag = true;
+        break;
+      case 'v':
+        verbose_flag = true;
+        break;
+      }
+    }
+
+    // Check mutually exlusive switches
+    if(qual_cutoff_char_given && qual_cutoff_value_given)
+      error("Switches [-Q, --qual-cutoff-char=string] and [-q, --qual-cutoff-value=uint32] are mutually exclusive");
+
+    // Parse arguments
+    if(argc - optind < 2)
+      error("Requires at least 2 arguments.");
+    db_arg = argv[optind];
+    ++optind;
+    for( ; optind < argc; ++optind) {
+      sequence_arg.push_back(argv[optind]);
+    }
+  }
+  static const char * usage() { return "Usage: error_correct_reads [options] db:path sequence:path+"; }
+  class error {
+    int code_;
+    std::ostringstream msg_;
+
+    // Select the correct version (GNU or XSI) version of
+    // strerror_r. strerror_ behaves like the GNU version of strerror_r,
+    // regardless of which version is provided by the system.
+    static const char* strerror__(char* buf, int res) {
+      return res != -1 ? buf : "Invalid error";
+    }
+    static const char* strerror__(char* buf, char* res) {
+      return res;
+    }
+    static const char* strerror_(int err, char* buf, size_t buflen) {
+      return strerror__(buf, strerror_r(err, buf, buflen));
+    }
+    struct no_t { };
+
+  public:
+    static no_t no;
+    error(int code = EXIT_FAILURE) : code_(code) { }
+    explicit error(const char* msg, int code = EXIT_FAILURE) : code_(code)
+      { msg_ << msg; }
+    error(const std::string& msg, int code = EXIT_FAILURE) : code_(code)
+      { msg_ << msg; }
+    error& operator<<(no_t) {
+      char buf[1024];
+      msg_ << ": " << strerror_(errno, buf, sizeof(buf));
+      return *this;
+    }
+    template<typename T>
+    error& operator<<(const T& x) { msg_ << x; return (*this); }
+    ~error() {
+      ::std::cerr << "Error: " << msg_.str() << "\n"
+                  << usage() << "\n"
+                  << "Use --help for more information"
+                  << ::std::endl;
+      exit(code_);
+    }
+  };
+  static const char * help() { return
+    "Error correct reads from a fastq file based on the k-mer frequencies.\n\n"
+    "Options (default value in (), *required):\n"
+    " -t, --thread=uint32                      Number of threads (1)\n"
+    " -m, --min-count=uint32                   Minimum count for a k-mer to be considered \"good\" (1)\n"
+    " -s, --skip=uint32                        Number of bases to skip for start k-mer (1)\n"
+    " -g, --good=uint32                        Number of good k-mer in a row for anchor (2)\n"
+    " -a, --anchor-count=uint32                Minimum count for an anchor k-mer (3)\n"
+    " -w, --window=uint32                      Size of window (10)\n"
+    " -e, --error=uint32                       Maximum number of error in a window (3)\n"
+    " -o, --output=prefix                      Output file prefix (error_corrected)\n"
+    "     --contaminant=path                   Jellyfish database of contaminant k-mers\n"
+    "     --trim-contaminant                   Trim reads containing contaminated k-mers instead of discarding (false)\n"
+    "     --homo-trim=int32                    Trim homo-polymer run at the 3' end\n"
+    "     --gzip                               Gzip output file (false)\n"
+    " -M, --no-mmap                            Do not memory map the input mer database (false)\n"
+    "     --apriori-error-rate=double          Probability of a base being an error (0.01)\n"
+    "     --poisson-threshold=double           Error probability threshold in Poisson test (1.0e-06)\n"
+    " -p, --cutoff=uint32                      Poisson cutoff when there are multiple choices\n"
+    " -q, --qual-cutoff-value=uint32           Any base above with quality equal or greater is untouched when there are multiple choices\n"
+    " -Q, --qual-cutoff-char=string            Any base above with quality equal or greater is untouched when there are multiple choices\n"
+    " -d, --no-discard                         Do not discard reads, output a single N (false)\n"
+    " -v, --verbose                            Be verbose (false)\n"
+    " -U, --usage                              Usage\n"
+    " -h, --help                               This message\n"
+    " -V, --version                            Version";
+  }
+  static const char* hidden() { return ""; }
+  void print_version(::std::ostream &os = std::cout) const {
+#ifndef PACKAGE_VERSION
+#define PACKAGE_VERSION "0.0.0"
+#endif
+    os << PACKAGE_VERSION << "\n";
+  }
+  void dump(::std::ostream &os = std::cout) {
+    os << "thread_given:" << thread_given << " thread_arg:" << thread_arg << "\n";
+    os << "min_count_given:" << min_count_given << " min_count_arg:" << min_count_arg << "\n";
+    os << "skip_given:" << skip_given << " skip_arg:" << skip_arg << "\n";
+    os << "good_given:" << good_given << " good_arg:" << good_arg << "\n";
+    os << "anchor_count_given:" << anchor_count_given << " anchor_count_arg:" << anchor_count_arg << "\n";
+    os << "window_given:" << window_given << " window_arg:" << window_arg << "\n";
+    os << "error_given:" << error_given << " error_arg:" << error_arg << "\n";
+    os << "output_given:" << output_given << " output_arg:" << output_arg << "\n";
+    os << "contaminant_given:" << contaminant_given << " contaminant_arg:" << contaminant_arg << "\n";
+    os << "trim_contaminant_flag:" << trim_contaminant_flag << "\n";
+    os << "homo_trim_given:" << homo_trim_given << " homo_trim_arg:" << homo_trim_arg << "\n";
+    os << "gzip_flag:" << gzip_flag << "\n";
+    os << "no_mmap_flag:" << no_mmap_flag << "\n";
+    os << "apriori_error_rate_given:" << apriori_error_rate_given << " apriori_error_rate_arg:" << apriori_error_rate_arg << "\n";
+    os << "poisson_threshold_given:" << poisson_threshold_given << " poisson_threshold_arg:" << poisson_threshold_arg << "\n";
+    os << "cutoff_given:" << cutoff_given << " cutoff_arg:" << cutoff_arg << "\n";
+    os << "qual_cutoff_value_given:" << qual_cutoff_value_given << " qual_cutoff_value_arg:" << qual_cutoff_value_arg << "\n";
+    os << "qual_cutoff_char_given:" << qual_cutoff_char_given << " qual_cutoff_char_arg:" << qual_cutoff_char_arg << "\n";
+    os << "no_discard_flag:" << no_discard_flag << "\n";
+    os << "verbose_flag:" << verbose_flag << "\n";
+    os << "db_arg:" << db_arg << "\n";
+    os << "sequence_arg:" << vec_str(sequence_arg) << "\n";
+  }
+};
+#endif // __ARGS_T_HPP__"
diff --git a/src/error_correct_reads_cmdline.yaggo b/src/error_correct_reads_cmdline.yaggo
deleted file mode 100644
index 04640ae..0000000
--- a/src/error_correct_reads_cmdline.yaggo
+++ /dev/null
@@ -1,71 +0,0 @@
-purpose "Error correct reads from a fastq file based on the k-mer frequencies."
-package "error_correct_reads"
-
-name "args_t"
-
-option("thread", "t") {
-  description "Number of threads"
-  uint32; default "1" }
-option("min-count", "m") {
-  description "Minimum count for a k-mer to be considered \"good\""
-  uint32; default "1" }
-option("skip", "s") {
-  description "Number of bases to skip for start k-mer"
-  uint32; default "1" }
-option("good", "g") {
-  description "Number of good k-mer in a row for anchor"
-  uint32; default 2 }
-option("anchor-count", "a") {
-  description "Minimum count for an anchor k-mer"
-  uint32; default 3 }
-option("window", "w") {
-  description "Size of window"
-  uint32; default 10 }
-option("error", "e") {
-  description "Maximum number of error in a window"
-  uint32; default 3 }
-option("output", "o") {
-  description "Output file prefix"
-  string; default "error_corrected"; typestr "prefix" }
-option("contaminant") {
-  description "Jellyfish database of contaminant k-mers"
-  c_string; typestr "path" }
-option("trim-contaminant") {
-  description "Trim reads containing contaminated k-mers instead of discarding"
-  flag; off }
-option("homo-trim") {
-  description "Trim homo-polymer run at the 3' end" 
-  int32 }
-option("gzip") {
-  description "Gzip output file"
-  flag; off }
-option("M", "no-mmap") {
-  description "Do not memory map the input mer database"
-  off }
-option("apriori-error-rate") {
-  description "Probability of a base being an error"
-  double; default 0.01 }
-option("poisson-threshold") {
-  description "Error probability threshold in Poisson test"
-  double; default 1e-6 }
-option("cutoff","p") {
-  description "Poisson cutoff when there are multiple choices"
-  uint32 }
-option("qual-cutoff-value", "q") {
-  description "Any base above with quality equal or greater is untouched when there are multiple choices"
-  uint32 }
-option("qual-cutoff-char", "Q") {
-  description "Any base above with quality equal or greater is untouched when there are multiple choices"
-  string; conflict "qual-cutoff-value" }
-option("d", "no-discard") {
-  description "Do not discard reads, output a single N"
-  off }
-option("verbose", "v") {
-  description "Be verbose"
-  flag; off }
-arg("db") {
-  description "Mer database"
-  c_string; typestr "path" }
-arg("sequence") {
-  description "Input sequence"
-  c_string; typestr "path"; multiple; at_least 1 }
diff --git a/src/merge_mate_pairs_cmdline.hpp b/src/merge_mate_pairs_cmdline.hpp
new file mode 100644
index 0000000..065324a
--- /dev/null
+++ b/src/merge_mate_pairs_cmdline.hpp
@@ -0,0 +1,417 @@
+/***** This code was generated by Yaggo. Do not edit ******/
+
+/* Quorum
+ * Copyright (C) 2012  Genome group at University of Maryland.
+ * 
+ * This program is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, either version 3 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+
+#ifndef __CMDLINE_HPP__
+#define __CMDLINE_HPP__
+
+#include <stdint.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <getopt.h>
+#include <errno.h>
+#include <string.h>
+#include <stdexcept>
+#include <string>
+#include <limits>
+#include <vector>
+#include <iostream>
+#include <sstream>
+#include <memory>
+
+class cmdline {
+ // Boiler plate stuff. Conversion from string to other formats
+  static bool adjust_double_si_suffix(double &res, const char *suffix) {
+    if(*suffix == '\0')
+      return true;
+    if(*(suffix + 1) != '\0')
+      return false;
+
+    switch(*suffix) {
+    case 'a': res *= 1e-18; break;
+    case 'f': res *= 1e-15; break;
+    case 'p': res *= 1e-12; break;
+    case 'n': res *= 1e-9;  break;
+    case 'u': res *= 1e-6;  break;
+    case 'm': res *= 1e-3;  break;
+    case 'k': res *= 1e3;   break;
+    case 'M': res *= 1e6;   break;
+    case 'G': res *= 1e9;   break;
+    case 'T': res *= 1e12;  break;
+    case 'P': res *= 1e15;  break;
+    case 'E': res *= 1e18;  break;
+    default: return false;
+    }
+    return true;
+  }
+
+  static double conv_double(const char *str, ::std::string &err, bool si_suffix) {
+    char *endptr = 0;
+    errno = 0;
+    double res = strtod(str, &endptr);
+    if(endptr == str) {
+      err.assign("Invalid floating point string");
+      return (double)0.0;
+    }
+    if(errno) {
+      err.assign(strerror(errno));
+      return (double)0.0;
+    }
+    bool invalid =
+      si_suffix ? !adjust_double_si_suffix(res, endptr) : *endptr != '\0';
+    if(invalid) {
+      err.assign("Invalid character");
+      return (double)0.0;
+    }
+    return res;
+  }
+
+  static int conv_enum(const char* str, ::std::string& err, const char* const strs[]) {
+    int res = 0;
+    for(const char* const* cstr = strs; *cstr; ++cstr, ++res)
+      if(!strcmp(*cstr, str))
+        return res;
+    err += "Invalid constant '";
+    err += str;
+    err += "'. Expected one of { ";
+    for(const char* const* cstr = strs; *cstr; ++cstr) {
+      if(cstr != strs)
+        err += ", ";
+      err += *cstr;
+    }
+    err += " }";
+    return -1;
+  }
+
+  template<typename T>
+  static bool adjust_int_si_suffix(T &res, const char *suffix) {
+    if(*suffix == '\0')
+      return true;
+    if(*(suffix + 1) != '\0')
+      return false;
+
+    switch(*suffix) {
+    case 'k': res *= (T)1000; break;
+    case 'M': res *= (T)1000000; break;
+    case 'G': res *= (T)1000000000; break;
+    case 'T': res *= (T)1000000000000; break;
+    case 'P': res *= (T)1000000000000000; break;
+    case 'E': res *= (T)1000000000000000000; break;
+    default: return false;
+    }
+    return true;
+  }
+
+  template<typename T>
+  static T conv_int(const char *str, ::std::string &err, bool si_suffix) {
+    char *endptr = 0;
+    errno = 0;
+    long long int res = strtoll(str, &endptr, 0);
+    if(endptr == str) {
+      err.assign("Invalid signed int string");
+      return (T)0;
+    }
+    if(errno) {
+      err.assign(strerror(errno));
+      return (T)0;
+    }
+    bool invalid =
+      si_suffix ? !adjust_int_si_suffix(res, endptr) : *endptr != '\0';
+    if(invalid) {
+      err.assign("Invalid character");
+      return (T)0;
+    }
+    if(res > ::std::numeric_limits<T>::max() ||
+       res < ::std::numeric_limits<T>::min()) {
+      err.assign("Value out of range");
+      return (T)0;
+    }
+    return (T)res;
+  }
+
+  template<typename T>
+  static T conv_uint(const char *str, ::std::string &err, bool si_suffix) {
+    char *endptr = 0;
+    errno = 0;
+    while(isspace(*str)) { ++str; }
+    if(*str == '-') {
+      err.assign("Negative value");
+      return (T)0;
+    }
+    unsigned long long int res = strtoull(str, &endptr, 0);
+    if(endptr == str) {
+      err.assign("Invalid unsigned int string");
+      return (T)0;
+    }
+    if(errno) {
+      err.assign(strerror(errno));
+      return (T)0;
+    }
+    bool invalid =
+      si_suffix ? !adjust_int_si_suffix(res, endptr) : *endptr != '\0';
+    if(invalid) {
+      err.assign("Invalid character");
+      return (T)0;
+    }
+    if(res > ::std::numeric_limits<T>::max()) {
+      err.assign("Value out of range");
+      return (T)0;
+    }
+    return (T)res;
+  }
+
+  template<typename T>
+  static ::std::string vec_str(const std::vector<T> &vec) {
+    ::std::ostringstream os;
+    for(typename ::std::vector<T>::const_iterator it = vec.begin();
+        it != vec.end(); ++it) {
+      if(it != vec.begin())
+        os << ",";
+      os << *it;
+    }
+    return os.str();
+  }
+
+  class string : public ::std::string {
+  public:
+    string() : ::std::string() {}
+    explicit string(const ::std::string &s) : std::string(s) {}
+    explicit string(const char *s) : ::std::string(s) {}
+    int as_enum(const char* const strs[]) {
+      ::std::string err;
+      int res = conv_enum((const char*)this->c_str(), err, strs);
+      if(!err.empty())
+        throw ::std::runtime_error(err);
+      return res;
+    }
+
+
+    uint32_t as_uint32_suffix() const { return as_uint32(true); }
+    uint32_t as_uint32(bool si_suffix = false) const {
+      ::std::string err;
+      uint32_t res = conv_uint<uint32_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to uint32_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    uint64_t as_uint64_suffix() const { return as_uint64(true); }
+    uint64_t as_uint64(bool si_suffix = false) const {
+      ::std::string err;
+      uint64_t res = conv_uint<uint64_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to uint64_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    int32_t as_int32_suffix() const { return as_int32(true); }
+    int32_t as_int32(bool si_suffix = false) const {
+      ::std::string err;
+      int32_t res = conv_int<int32_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to int32_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    int64_t as_int64_suffix() const { return as_int64(true); }
+    int64_t as_int64(bool si_suffix = false) const {
+      ::std::string err;
+      int64_t res = conv_int<int64_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to int64_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    int as_int_suffix() const { return as_int(true); }
+    int as_int(bool si_suffix = false) const {
+      ::std::string err;
+      int res = conv_int<int>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to int_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    long as_long_suffix() const { return as_long(true); }
+    long as_long(bool si_suffix = false) const {
+      ::std::string err;
+      long res = conv_int<long>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to long_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    double as_double_suffix() const { return as_double(true); }
+    double as_double(bool si_suffix = false) const {
+      ::std::string err;
+      double res = conv_double((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to double_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+  };
+
+public:
+  ::std::vector<const char *>    file_arg;
+  typedef ::std::vector<const char *>::iterator file_arg_it;
+  typedef ::std::vector<const char *>::const_iterator file_arg_const_it;
+
+  enum {
+    START_OPT = 1000
+  };
+
+  cmdline() :
+    file_arg()
+  { }
+
+  cmdline(int argc, char* argv[]) :
+    file_arg()
+  { parse(argc, argv); }
+
+  void parse(int argc, char* argv[]) {
+    static struct option long_options[] = {
+      {"help", 0, 0, 'h'},
+      {"usage", 0, 0, 'U'},
+      {"version", 0, 0, 'V'},
+      {0, 0, 0, 0}
+    };
+    static const char *short_options = "hVU";
+
+#define CHECK_ERR(type,val,which) if(!err.empty()) { ::std::cerr << "Invalid " #type " '" << val << "' for [" which "]: " << err << "\n"; exit(1); }
+    while(true) {
+      int index = -1;
+      int c = getopt_long(argc, argv, short_options, long_options, &index);
+      if(c == -1) break;
+      switch(c) {
+      case ':':
+        ::std::cerr << "Missing required argument for "
+                  << (index == -1 ? ::std::string(1, (char)optopt) : std::string(long_options[index].name))
+                  << ::std::endl;
+        exit(1);
+      case 'h':
+        ::std::cout << usage() << "\n\n" << help() << std::endl;
+        exit(0);
+      case 'U':
+        ::std::cout << usage() << "\nUse --help for more information." << std::endl;
+        exit(0);
+      case 'V':
+        print_version();
+        exit(0);
+      case '?':
+        ::std::cerr << "Use --usage or --help for some help\n";
+        exit(1);
+      }
+    }
+
+    // Parse arguments
+    if(argc - optind < 2)
+      error("Requires at least 2 arguments.");
+    for( ; optind < argc; ++optind) {
+      file_arg.push_back(argv[optind]);
+    }
+  }
+  static const char * usage() { return "Merge input files"; }
+  class error {
+    int code_;
+    std::ostringstream msg_;
+
+    // Select the correct version (GNU or XSI) version of
+    // strerror_r. strerror_ behaves like the GNU version of strerror_r,
+    // regardless of which version is provided by the system.
+    static const char* strerror__(char* buf, int res) {
+      return res != -1 ? buf : "Invalid error";
+    }
+    static const char* strerror__(char* buf, char* res) {
+      return res;
+    }
+    static const char* strerror_(int err, char* buf, size_t buflen) {
+      return strerror__(buf, strerror_r(err, buf, buflen));
+    }
+    struct no_t { };
+
+  public:
+    static no_t no;
+    error(int code = EXIT_FAILURE) : code_(code) { }
+    explicit error(const char* msg, int code = EXIT_FAILURE) : code_(code)
+      { msg_ << msg; }
+    error(const std::string& msg, int code = EXIT_FAILURE) : code_(code)
+      { msg_ << msg; }
+    error& operator<<(no_t) {
+      char buf[1024];
+      msg_ << ": " << strerror_(errno, buf, sizeof(buf));
+      return *this;
+    }
+    template<typename T>
+    error& operator<<(const T& x) { msg_ << x; return (*this); }
+    ~error() {
+      ::std::cerr << "Error: " << msg_.str() << "\n"
+                  << usage() << "\n"
+                  << "Use --help for more information"
+                  << ::std::endl;
+      exit(code_);
+    }
+  };
+  static const char * help() { return
+    "Take an even number of files and interleave sequences from even and odd files.\n\n"
+    "Options (default value in (), *required):\n"
+    " -U, --usage                              Usage\n"
+    " -h, --help                               This message\n"
+    " -V, --version                            Version";
+  }
+  static const char* hidden() { return ""; }
+  void print_version(::std::ostream &os = std::cout) const {
+#ifndef PACKAGE_VERSION
+#define PACKAGE_VERSION "0.0.0"
+#endif
+    os << PACKAGE_VERSION << "\n";
+  }
+  void dump(::std::ostream &os = std::cout) {
+    os << "file_arg:" << vec_str(file_arg) << "\n";
+  }
+};
+#endif // __CMDLINE_HPP__"
diff --git a/src/merge_mate_pairs_cmdline.yaggo b/src/merge_mate_pairs_cmdline.yaggo
deleted file mode 100644
index e584a7d..0000000
--- a/src/merge_mate_pairs_cmdline.yaggo
+++ /dev/null
@@ -1,9 +0,0 @@
-usage "Merge input files"
-description "Take an even number of files and interleave sequences from even and odd files."
-package "merge_mate_pairs"
-name "cmdline"
-
-arg("file") {
-  description "Input sequence files"
-  c_string; typestr "PATH"
-  multiple; at_least 2 }
diff --git a/src/split_mate_pairs_cmdline.hpp b/src/split_mate_pairs_cmdline.hpp
new file mode 100644
index 0000000..03145c0
--- /dev/null
+++ b/src/split_mate_pairs_cmdline.hpp
@@ -0,0 +1,414 @@
+/***** This code was generated by Yaggo. Do not edit ******/
+
+/* Quorum
+ * Copyright (C) 2012  Genome group at University of Maryland.
+ * 
+ * This program is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, either version 3 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+
+#ifndef __CMDLINE_HPP__
+#define __CMDLINE_HPP__
+
+#include <stdint.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <getopt.h>
+#include <errno.h>
+#include <string.h>
+#include <stdexcept>
+#include <string>
+#include <limits>
+#include <vector>
+#include <iostream>
+#include <sstream>
+#include <memory>
+
+class cmdline {
+ // Boiler plate stuff. Conversion from string to other formats
+  static bool adjust_double_si_suffix(double &res, const char *suffix) {
+    if(*suffix == '\0')
+      return true;
+    if(*(suffix + 1) != '\0')
+      return false;
+
+    switch(*suffix) {
+    case 'a': res *= 1e-18; break;
+    case 'f': res *= 1e-15; break;
+    case 'p': res *= 1e-12; break;
+    case 'n': res *= 1e-9;  break;
+    case 'u': res *= 1e-6;  break;
+    case 'm': res *= 1e-3;  break;
+    case 'k': res *= 1e3;   break;
+    case 'M': res *= 1e6;   break;
+    case 'G': res *= 1e9;   break;
+    case 'T': res *= 1e12;  break;
+    case 'P': res *= 1e15;  break;
+    case 'E': res *= 1e18;  break;
+    default: return false;
+    }
+    return true;
+  }
+
+  static double conv_double(const char *str, ::std::string &err, bool si_suffix) {
+    char *endptr = 0;
+    errno = 0;
+    double res = strtod(str, &endptr);
+    if(endptr == str) {
+      err.assign("Invalid floating point string");
+      return (double)0.0;
+    }
+    if(errno) {
+      err.assign(strerror(errno));
+      return (double)0.0;
+    }
+    bool invalid =
+      si_suffix ? !adjust_double_si_suffix(res, endptr) : *endptr != '\0';
+    if(invalid) {
+      err.assign("Invalid character");
+      return (double)0.0;
+    }
+    return res;
+  }
+
+  static int conv_enum(const char* str, ::std::string& err, const char* const strs[]) {
+    int res = 0;
+    for(const char* const* cstr = strs; *cstr; ++cstr, ++res)
+      if(!strcmp(*cstr, str))
+        return res;
+    err += "Invalid constant '";
+    err += str;
+    err += "'. Expected one of { ";
+    for(const char* const* cstr = strs; *cstr; ++cstr) {
+      if(cstr != strs)
+        err += ", ";
+      err += *cstr;
+    }
+    err += " }";
+    return -1;
+  }
+
+  template<typename T>
+  static bool adjust_int_si_suffix(T &res, const char *suffix) {
+    if(*suffix == '\0')
+      return true;
+    if(*(suffix + 1) != '\0')
+      return false;
+
+    switch(*suffix) {
+    case 'k': res *= (T)1000; break;
+    case 'M': res *= (T)1000000; break;
+    case 'G': res *= (T)1000000000; break;
+    case 'T': res *= (T)1000000000000; break;
+    case 'P': res *= (T)1000000000000000; break;
+    case 'E': res *= (T)1000000000000000000; break;
+    default: return false;
+    }
+    return true;
+  }
+
+  template<typename T>
+  static T conv_int(const char *str, ::std::string &err, bool si_suffix) {
+    char *endptr = 0;
+    errno = 0;
+    long long int res = strtoll(str, &endptr, 0);
+    if(endptr == str) {
+      err.assign("Invalid signed int string");
+      return (T)0;
+    }
+    if(errno) {
+      err.assign(strerror(errno));
+      return (T)0;
+    }
+    bool invalid =
+      si_suffix ? !adjust_int_si_suffix(res, endptr) : *endptr != '\0';
+    if(invalid) {
+      err.assign("Invalid character");
+      return (T)0;
+    }
+    if(res > ::std::numeric_limits<T>::max() ||
+       res < ::std::numeric_limits<T>::min()) {
+      err.assign("Value out of range");
+      return (T)0;
+    }
+    return (T)res;
+  }
+
+  template<typename T>
+  static T conv_uint(const char *str, ::std::string &err, bool si_suffix) {
+    char *endptr = 0;
+    errno = 0;
+    while(isspace(*str)) { ++str; }
+    if(*str == '-') {
+      err.assign("Negative value");
+      return (T)0;
+    }
+    unsigned long long int res = strtoull(str, &endptr, 0);
+    if(endptr == str) {
+      err.assign("Invalid unsigned int string");
+      return (T)0;
+    }
+    if(errno) {
+      err.assign(strerror(errno));
+      return (T)0;
+    }
+    bool invalid =
+      si_suffix ? !adjust_int_si_suffix(res, endptr) : *endptr != '\0';
+    if(invalid) {
+      err.assign("Invalid character");
+      return (T)0;
+    }
+    if(res > ::std::numeric_limits<T>::max()) {
+      err.assign("Value out of range");
+      return (T)0;
+    }
+    return (T)res;
+  }
+
+  template<typename T>
+  static ::std::string vec_str(const std::vector<T> &vec) {
+    ::std::ostringstream os;
+    for(typename ::std::vector<T>::const_iterator it = vec.begin();
+        it != vec.end(); ++it) {
+      if(it != vec.begin())
+        os << ",";
+      os << *it;
+    }
+    return os.str();
+  }
+
+  class string : public ::std::string {
+  public:
+    string() : ::std::string() {}
+    explicit string(const ::std::string &s) : std::string(s) {}
+    explicit string(const char *s) : ::std::string(s) {}
+    int as_enum(const char* const strs[]) {
+      ::std::string err;
+      int res = conv_enum((const char*)this->c_str(), err, strs);
+      if(!err.empty())
+        throw ::std::runtime_error(err);
+      return res;
+    }
+
+
+    uint32_t as_uint32_suffix() const { return as_uint32(true); }
+    uint32_t as_uint32(bool si_suffix = false) const {
+      ::std::string err;
+      uint32_t res = conv_uint<uint32_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to uint32_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    uint64_t as_uint64_suffix() const { return as_uint64(true); }
+    uint64_t as_uint64(bool si_suffix = false) const {
+      ::std::string err;
+      uint64_t res = conv_uint<uint64_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to uint64_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    int32_t as_int32_suffix() const { return as_int32(true); }
+    int32_t as_int32(bool si_suffix = false) const {
+      ::std::string err;
+      int32_t res = conv_int<int32_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to int32_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    int64_t as_int64_suffix() const { return as_int64(true); }
+    int64_t as_int64(bool si_suffix = false) const {
+      ::std::string err;
+      int64_t res = conv_int<int64_t>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to int64_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    int as_int_suffix() const { return as_int(true); }
+    int as_int(bool si_suffix = false) const {
+      ::std::string err;
+      int res = conv_int<int>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to int_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    long as_long_suffix() const { return as_long(true); }
+    long as_long(bool si_suffix = false) const {
+      ::std::string err;
+      long res = conv_int<long>((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to long_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+    double as_double_suffix() const { return as_double(true); }
+    double as_double(bool si_suffix = false) const {
+      ::std::string err;
+      double res = conv_double((const char*)this->c_str(), err, si_suffix);
+      if(!err.empty()) {
+        ::std::string msg("Invalid conversion of '");
+        msg += *this;
+        msg += "' to double_t: ";
+        msg += err;
+        throw ::std::runtime_error(msg);
+      }
+      return res;
+    }
+  };
+
+public:
+  string                         prefix_arg;
+
+  enum {
+    START_OPT = 1000
+  };
+
+  cmdline() :
+    prefix_arg("")
+  { }
+
+  cmdline(int argc, char* argv[]) :
+    prefix_arg("")
+  { parse(argc, argv); }
+
+  void parse(int argc, char* argv[]) {
+    static struct option long_options[] = {
+      {"help", 0, 0, 'h'},
+      {"usage", 0, 0, 'U'},
+      {"version", 0, 0, 'V'},
+      {0, 0, 0, 0}
+    };
+    static const char *short_options = "hVU";
+
+#define CHECK_ERR(type,val,which) if(!err.empty()) { ::std::cerr << "Invalid " #type " '" << val << "' for [" which "]: " << err << "\n"; exit(1); }
+    while(true) {
+      int index = -1;
+      int c = getopt_long(argc, argv, short_options, long_options, &index);
+      if(c == -1) break;
+      switch(c) {
+      case ':':
+        ::std::cerr << "Missing required argument for "
+                  << (index == -1 ? ::std::string(1, (char)optopt) : std::string(long_options[index].name))
+                  << ::std::endl;
+        exit(1);
+      case 'h':
+        ::std::cout << usage() << "\n\n" << help() << std::endl;
+        exit(0);
+      case 'U':
+        ::std::cout << usage() << "\nUse --help for more information." << std::endl;
+        exit(0);
+      case 'V':
+        print_version();
+        exit(0);
+      case '?':
+        ::std::cerr << "Use --usage or --help for some help\n";
+        exit(1);
+      }
+    }
+
+    // Parse arguments
+    if(argc - optind != 1)
+      error("Requires exactly 1 argument.");
+    prefix_arg = string(argv[optind]);
+    ++optind;
+  }
+  static const char * usage() { return "Split fasta file in two"; }
+  class error {
+    int code_;
+    std::ostringstream msg_;
+
+    // Select the correct version (GNU or XSI) version of
+    // strerror_r. strerror_ behaves like the GNU version of strerror_r,
+    // regardless of which version is provided by the system.
+    static const char* strerror__(char* buf, int res) {
+      return res != -1 ? buf : "Invalid error";
+    }
+    static const char* strerror__(char* buf, char* res) {
+      return res;
+    }
+    static const char* strerror_(int err, char* buf, size_t buflen) {
+      return strerror__(buf, strerror_r(err, buf, buflen));
+    }
+    struct no_t { };
+
+  public:
+    static no_t no;
+    error(int code = EXIT_FAILURE) : code_(code) { }
+    explicit error(const char* msg, int code = EXIT_FAILURE) : code_(code)
+      { msg_ << msg; }
+    error(const std::string& msg, int code = EXIT_FAILURE) : code_(code)
+      { msg_ << msg; }
+    error& operator<<(no_t) {
+      char buf[1024];
+      msg_ << ": " << strerror_(errno, buf, sizeof(buf));
+      return *this;
+    }
+    template<typename T>
+    error& operator<<(const T& x) { msg_ << x; return (*this); }
+    ~error() {
+      ::std::cerr << "Error: " << msg_.str() << "\n"
+                  << usage() << "\n"
+                  << "Use --help for more information"
+                  << ::std::endl;
+      exit(code_);
+    }
+  };
+  static const char * help() { return
+    "Read fasta file from stdin and write sequence alternatively to two output files\n\n"
+    "Options (default value in (), *required):\n"
+    " -U, --usage                              Usage\n"
+    " -h, --help                               This message\n"
+    " -V, --version                            Version";
+  }
+  static const char* hidden() { return ""; }
+  void print_version(::std::ostream &os = std::cout) const {
+#ifndef PACKAGE_VERSION
+#define PACKAGE_VERSION "0.0.0"
+#endif
+    os << PACKAGE_VERSION << "\n";
+  }
+  void dump(::std::ostream &os = std::cout) {
+    os << "prefix_arg:" << prefix_arg << "\n";
+  }
+};
+#endif // __CMDLINE_HPP__"
diff --git a/src/split_mate_pairs_cmdline.yaggo b/src/split_mate_pairs_cmdline.yaggo
deleted file mode 100644
index f3d524b..0000000
--- a/src/split_mate_pairs_cmdline.yaggo
+++ /dev/null
@@ -1,8 +0,0 @@
-usage "Split fasta file in two"
-description "Read fasta file from stdin and write sequence alternatively to two output files"
-package "split_mate_pairs"
-name "cmdline"
-
-arg("prefix") {
-  description "Output file name prefix"
-  string; typestr "PATH" }
diff --git a/unit_tests/test_speed_calc.cc b/unit_tests/test_speed_calc.cc
deleted file mode 100644
index ca73d3d..0000000
--- a/unit_tests/test_speed_calc.cc
+++ /dev/null
@@ -1,30 +0,0 @@
-#include <gtest/gtest.h>
-
-#include <jellyfish/misc.hpp>
-#include <src/mer_database.hpp>
-
-namespace {
-TEST(SpeedCalc, Simple) {
-  uint64_t oids[4];
-
-  for(int i = 0; i < 100; ++i) {
-    const int r = jellyfish::random_bits(5) + 20;
-    const int c = 2 * (jellyfish::random_bits(7) + 1);
-    mer_dna::k(c >> 1);
-    const uint64_t size_mask = ((uint64_t)1 << r) - 1;
-    RectangularBinaryMatrix matrix(r, c);
-    matrix.randomize(jellyfish::random_bits);
-    oid_speed_calc osc(matrix, size_mask);
-
-    mer_dna m;
-    for(int j = 0; j < 100; ++j) {
-      m.randomize();
-      osc.calc(m, oids);
-      for(int b = 0; b < 4; ++b) {
-        m.base(0) = b;
-        EXPECT_EQ(matrix.times(m) & size_mask, oids[b]);
-      }
-    }
-  }
-}
-}

More details

Full run details

Historical runs

© 2018-2023 Jelmer Vernooij. File a bug. Source code. Published under the GNU GPLv2 or later.