# Configure paths for SDL
# Sam Lantinga 9/21/99
# stolen from Manish Singh
# stolen back from Frank Belew
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor

AC_DEFUN([AC_DEFINE_DIR], [
  prefix_NONE=
  exec_prefix_NONE=
  test "x$prefix" = xNONE && prefix_NONE=yes && 
prefix=$ac_default_prefix
  test "x$exec_prefix" = xNONE && exec_prefix_NONE=yes && 
exec_prefix=$prefix
dnl In Autoconf 2.60, ${datadir} refers to ${datarootdir}, which in turn
dnl refers to ${prefix}.  Thus we have to use `eval' twice.
  eval ac_define_dir="\"[$]$2\""
  eval ac_define_dir="\"$ac_define_dir\""
  AC_SUBST($1, "$ac_define_dir")
  AC_DEFINE_UNQUOTED($1, "$ac_define_dir", [$3])
  test "$prefix_NONE" && prefix=NONE
  test "$exec_prefix_NONE" && exec_prefix=NONE
])

dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
dnl
AC_DEFUN(AM_PATH_SDL,
[dnl 
dnl Get the cflags and libraries from the sdl-config script
dnl
AC_ARG_WITH(sdl-prefix,[  --with-sdl-prefix=PFX   Prefix where SDL is installed (optional)],
            sdl_prefix="$withval", sdl_prefix="")
AC_ARG_WITH(sdl-exec-prefix,[  --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
            sdl_exec_prefix="$withval", sdl_exec_prefix="")
AC_ARG_ENABLE(sdltest, [  --disable-sdltest       Do not try to compile and run a test SDL program],
		    , enable_sdltest=yes)

  if test x$sdl_exec_prefix != x ; then
     sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
     if test x${SDL_CONFIG+set} != xset ; then
        SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
     fi
  fi
  if test x$sdl_prefix != x ; then
     sdl_args="$sdl_args --prefix=$sdl_prefix"
     if test x${SDL_CONFIG+set} != xset ; then
        SDL_CONFIG=$sdl_prefix/bin/sdl-config
     fi
  fi

  AC_PATH_PROG(SDL_CONFIG, sdl-config, no)
  min_sdl_version=ifelse([$1], ,0.11.0,$1)
  AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
  no_sdl=""
  if test "$SDL_CONFIG" = "no" ; then
    no_sdl=yes
  else
    SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
    SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`

    sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_sdltest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $SDL_CFLAGS"
      LIBS="$LIBS $SDL_LIBS"
dnl
dnl Now check if the installed SDL is sufficiently new. (Also sanity
dnl checks the results of sdl-config to some extent
dnl
      rm -f conf.sdltest
      AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "SDL.h"

char*
my_strdup (char *str)
{
  char *new_str;
  
  if (str)
    {
      new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
      strcpy (new_str, str);
    }
  else
    new_str = NULL;
  
  return new_str;
}

int main (int argc, char *argv[])
{
  int major, minor, micro;
  char *tmp_version;

  /* This hangs on some systems (?)
  system ("touch conf.sdltest");
  */
  { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = my_strdup("$min_sdl_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_sdl_version");
     exit(1);
   }

   if (($sdl_major_version > major) ||
      (($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
      (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
    {
      return 0;
    }
  else
    {
      printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
      printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
      printf("*** best to upgrade to the required version.\n");
      printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
      printf("*** to point to the correct copy of sdl-config, and remove the file\n");
      printf("*** config.cache before re-running configure\n");
      return 1;
    }
}

],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_sdl" = x ; then
     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$SDL_CONFIG" = "no" ; then
       echo "*** The sdl-config script installed by SDL could not be found"
       echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the SDL_CONFIG environment variable to the"
       echo "*** full path to sdl-config."
     else
       if test -f conf.sdltest ; then
        :
       else
          echo "*** Could not run SDL test program, checking why..."
          CFLAGS="$CFLAGS $SDL_CFLAGS"
          LIBS="$LIBS $SDL_LIBS"
          AC_TRY_LINK([
#include <stdio.h>
#include "SDL.h"
],      [ return 0; ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding SDL or finding the wrong"
          echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means SDL was incorrectly installed"
          echo "*** or that you have moved SDL since it was installed. In the latter case, you"
          echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     SDL_CFLAGS=""
     SDL_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(SDL_CFLAGS)
  AC_SUBST(SDL_LIBS)
  rm -f conf.sdltest
])

dnl Available from the GNU Autoconf Macro Archive at:
dnl http://www.gnu.org/software/ac-archive/htmldoc/mdl_have_opengl.html
dnl
AC_DEFUN([MDL_HAVE_OPENGL],
[
  AC_REQUIRE([AC_PROG_CC])
  AC_REQUIRE([AC_PATH_X])
  AC_REQUIRE([AC_PATH_XTRA])

  AC_CACHE_CHECK([for OpenGL], mdl_cv_have_OpenGL,
  [
dnl Don't check for Mesa first, vendor specific is usually more optimized
dnl Check for Mesa first, unless we were asked not to.
dnl    AC_ARG_WITH([--with-Mesa],
dnl                   [Prefer the Mesa library over a vendors native OpenGL library (default=yes)],
dnl                   with_Mesa_help_string)
dnl    AC_ARG_ENABLE(Mesa, $with_Mesa_help_string, use_Mesa=$enableval, use_Mesa=yes)

dnl    if test x"$use_Mesa" = xyes; then
dnl       GL_search_list="MesaGL   GL"
dnl      GLU_search_list="MesaGLU GLU"
dnl     GLX_search_list="MesaGLX GLX"
dnl    else
       GL_search_list="GL  MesaGL"
      GLU_search_list="GLU MesaGLU"
      GLX_search_list="GLX MesaGLX"
dnl    fi

    AC_LANG_SAVE
    AC_LANG_C

dnl If we are running under X11 then add in the appropriate libraries.
if test x"$no_x" != xyes; then
dnl Add everything we need to compile and link X programs to GL_X_CFLAGS
dnl and GL_X_LIBS.
  GL_CFLAGS="$X_CFLAGS"
  GL_X_LIBS="$X_PRE_LIBS $X_LIBS -lX11 -lXext -lXmu -lXt -lXi $X_EXTRA_LIBS"
fi
    GL_save_CPPFLAGS="$CPPFLAGS"
    CPPFLAGS="$GL_CFLAGS"

    GL_save_LIBS="$LIBS"
    LIBS="$GL_X_LIBS"


    # Save the "AC_MSG_RESULT file descriptor" to FD 8.
    exec 8>&AC_FD_MSG

    # Temporarily turn off AC_MSG_RESULT so that the user gets pretty
    # messages.
    exec AC_FD_MSG>/dev/null

    AC_SEARCH_LIBS(glAccum,          $GL_search_list, have_GL=yes,   have_GL=no)
    AC_SEARCH_LIBS(gluBeginCurve,   $GLU_search_list, have_GLU=yes,  have_GLU=no)
    AC_SEARCH_LIBS(glXChooseVisual, $GLX_search_list, have_GLX=yes,  have_GLX=no)
    AC_SEARCH_LIBS(glutInit,        glut,             have_glut=yes, have_glut=no)



    # Restore pretty messages.
    exec AC_FD_MSG>&8

    if test -n "$LIBS"; then
      mdl_cv_have_OpenGL=yes
      GL_LIBS="$LIBS"
      AC_SUBST(GL_CFLAGS)
      AC_SUBST(GL_LIBS)
    else
      mdl_cv_have_OpenGL=no
      GL_CFLAGS=
    fi

dnl Reset GL_X_LIBS regardless, since it was just a temporary variable
dnl and we don't want to be global namespace polluters.
    GL_X_LIBS=

    LIBS="$GL_save_LIBS"
    CPPFLAGS="$GL_save_CPPFLAGS"

    AC_LANG_RESTORE
    
dnl bugfix: dont forget to cache this variables, too
    mdl_cv_GL_CFLAGS="$GL_CFLAGS"
    mdl_cv_GL_LIBS="$GL_LIBS"
    mdl_cv_have_GL="$have_GL"
    mdl_cv_have_GLU="$have_GLU"
    mdl_cv_have_GLX="$have_GLX"
    mdl_cv_have_glut="$have_glut"
  ])
  GL_CFLAGS="$mdl_cv_GL_CFLAGS"
  GL_LIBS="$mdl_cv_GL_LIBS"
  have_GL="$mdl_cv_have_GL"
  have_GLU="$mdl_cv_have_GLU"
  have_GLX="$mdl_cv_have_GLX"
  have_glut="$mdl_cv_have_glut"
])
dnl endof bugfix -ainan