/*
test_pat_G
This frei0r plugin generates geometry test pattern images
Version 0.1	may 2010

Copyright (C) 2010  Marko Cebokli    http://lea.hamradio.si/~s57uuu


 This program is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation; either version 2 of the License, or
 (at your option) any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

*/

/***********************************************************
Test patterns: Geometry

This plugin draws a set of test patterns, which are useful for image geometry checking.

The patterns are drawn into a temporary char array, for two reasons:
1. drawing routines are color model independent,
2. drawing is done only when a parameter changes.

only the functions make_char2color_table(), quadrants() and
f0r_update() need to care about color models, endianness,
DV legality etc.

*************************************************************/

//compile:	gcc -Wall -c -fPIC test_pat_G.c -o test_pat_G.o

//link: gcc -lm -shared -o test_pat_G.so test_pat_G.o

#include <stdlib.h>
#include <assert.h>
#include <math.h>

#include "frei0r.h"
#include "frei0r/math.h"


//----------------------------------------------------------
void draw_rectangle(unsigned char *sl, int w, int h, int x, int y, int wr, int hr, unsigned char gray)
{
int i,j;
int zx,kx,zy,ky;

zx=x;  if (zx<0) zx=0;
zy=y;  if (zy<0) zy=0;
kx=x+wr;  if (kx>w) kx=w;
ky=y+hr;  if (ky>h) ky=h;
for (i=zy;i<ky;i++)
	for (j=zx;j<kx;j++)
		sl[w*i+j]=gray;

}

//-----------------------------------------------------------
//pocasna za velike kroge.....
void draw_circle(unsigned char *sl, int w, int h, float ar, int x, int y, int rn, int rz, unsigned char gray)
{
int i,j;
int zx,kx,zy,ky;
float rr,rmin,rmax;

zx=x-rz/ar-1;  if (zx<0) zx=0;
zy=y-rz-1;  if (zy<0) zy=0;
kx=x+rz/ar+1;  if (kx>=w) kx=w-1;
ky=y+rz+1;  if (ky>=h) ky=h-1;
rmin=(float)rn;
rmax=(float)rz;
for (i=zy;i<ky;i++)
	for (j=zx;j<kx;j++)
		{
		rr=sqrtf((i-y)*(i-y)+(j-x)*(j-x)*ar*ar);
		if ((rr>=rmin)&&(rr<=rmax)) sl[w*i+j]=gray;
		}

}

//-----------------------------------------------------------
//dir:   1=up   2=right   3=down   4=left
void draw_wedge(unsigned char *sl, int w, int h, int x, int y, int size, int dir, unsigned char gray)
{
int i,j,ii,jj;

switch (dir)
	{
	case 1:		//up
		for (i=0;i<size;i++)
			for (j=0;j<=i;j++)
				{
				ii=y+i; if (ii>=h) ii=h-1;
				jj=x+j; if (jj>=w) jj=w-1;
				sl[w*ii+jj]=gray;
				jj=x-j; if (jj<0) jj=0;
				sl[w*ii+jj]=gray;
				}
		break;
	case 2:		//right
		for (i=0;i<size;i++)
			for (j=0;j<=i;j++)
				{
				ii=x-i; if (ii<0) ii=0;
				jj=y+j; if (jj>=h) jj=h-1;
				sl[w*jj+ii]=gray;
				jj=y-j; if (jj<0) jj=0;
				sl[w*jj+ii]=gray;
				}
		break;
	case 3:		//down
		for (i=0;i<size;i++)
			for (j=0;j<=i;j++)
				{
				ii=y-i; if (ii<0) ii=0;
				jj=x+j; if (jj>=w) jj=w-1;
				sl[w*ii+jj]=gray;
				jj=x-j; if (jj<0) jj=0;
				sl[w*ii+jj]=gray;
				}
		break;
	case 4:		//left
		for (i=0;i<size;i++)
			for (j=0;j<=i;j++)
				{
				ii=x+i; if (ii>=w) ii=w-1;
				jj=y+j; if (jj>=h) jj=h-1;
				sl[w*jj+ii]=gray;
				jj=y-j; if (jj<0) jj=0;
				sl[w*jj+ii]=gray;
				}
		break;
	default:
		break;
	}
}

//----------------------------------------------------------
//draws a checkerboard pattern
//size = size of squares (pixels)
//ar = pixel aspect ratio
//rim : 0=uniform	1=gray rim
void sah1(unsigned char *sl, int w, int h, int size, float ar, int rim)
{
int i,j,kx,ky,z,pv,ps,zv,zs;
unsigned char black,gray1,gray2,white;
int ox,oy;

if (size<1) size=1;
kx=size; ky=size;
kx=kx/ar;		//kao aspect!=1  (anamorph)
kx = MAX(kx, 1);
ky = MAX(ky, 1);

black=0;
white=255;
gray1=black+(white-black)*0.3;
gray2=black+(white-black)*0.7;

ox=kx*2-(w/2)%(kx*2);	//centering offset
oy=ky*2-(h/2)%(ky*2);
ps=(w/2)%kx; if (ps==0) ps=kx;
pv=(h/2)%ky; if (pv==0) pv=ky;
zv=h-pv;
zs=w-ps;

if (rim==0)
	{
	for (i=0;i<h;i++)
		{
		for (j=0;j<w;j++)
			{
			if ((((i+oy)/ky)%2)^(((j+ox)/kx)%2))
				sl[i*w+j]=white;
			else
				sl[i*w+j]=black;
			}
		}
	}
else
	{
	for (i=0;i<h;i++)
		{
		for (j=0;j<w;j++)
			{
			z=0;
			if((j<ps)||(j>=zs)||(i<pv)||(i>=zv)) z=1;
			if ((((i+oy)/ky)%2)^(((j+ox)/kx)%2))
				sl[i*w+j]= (z==0) ? white : gray2;
			else
				sl[i*w+j]= (z==0) ? black : gray1;
			}
		}
	}

}

//-------------------------------------------------
//draws horizontal lines
//clr=clear background
void hlines(unsigned char *sl, int w, int h, int size1, int size2, float ar, int clr)
{
int i,iz;
unsigned char black,white;

black=0;
white=255;

if (clr!=0) for (i=0;i<(w*h);i++) sl[i]=black;	//black background

if (size1<1) size1=1;
if (size2<1) size2=1;
iz=h/2-size1*((h/2)/size1);
for (i=iz;i<h;i=i+size1)	//hor. lines
	draw_rectangle(sl,w,h,0,i-size2/2,w,size2,white);

}

//-------------------------------------------------
//draws vertical lines
//clr=clear background
void vlines(unsigned char *sl, int w, int h, int size1, int size2, float ar, int clr)
{
int i,iz;
unsigned char black,white;

black=0;
white=255;

if (clr!=0) for (i=0;i<(w*h);i++) sl[i]=black;	//black background

if (size1<1) size1=1;
if (size2<1) size2=1;
if (ar==0) ar=1.0;
size1=size1/ar;
iz=w/2-size1*((w/2)/size1);
for (i=iz;i<w;i=i+size1)	//vert. lines
	draw_rectangle(sl,w,h,i-size2/2,0,size2,h,white);

}

//-------------------------------------------------
//draws a rectangular grid pattern
void mreza(unsigned char *sl, int w, int h, int size1, int size2, float ar)
{

if (ar==0) ar=1.0;
hlines(sl, w, h, size1, size2, ar, 1);
vlines(sl, w, h, size1/ar, size2, ar, 0);

}

//-------------------------------------------------
//draws points (small squares really)
void pike(unsigned char *sl, int w, int h, int size1, int size2, float ar)
{
int i,j,iz,jz;
int black,white;
int size1a,size2a;

black=0;
white=255;

for (i=0;i<(w*h);i++) sl[i]=black;	//black background

if (size1<1) size1=1;
if (size2<1) size2=1;
if (ar==0) ar=1.0;
size1a=size1/ar; size2a=size2/ar;
iz=h/2-size1*((h/2)/size1);
jz=w/2-size1a*((w/2)/size1a);
for (i=iz;i<h;i=i+size1)
	for (j=jz;j<w;j=j+size1a)
		draw_rectangle(sl,w,h,j-size2/2,i-size2/2,size2a,size2,white);

}

//-----------------------------------------------------------
//draws a bullseye pattern
void tarca(unsigned char *sl, int w, int h, int size1, int size2, float ar)
{
unsigned char black,white;
int i;

black=0;
white=255;

for (i=0;i<(w*h);i++) sl[i]=black;	//black background

if (size1<20) size1=20;		//otherwise too slooooow...

draw_circle(sl, w, h, ar, w/2, h/2, 0, size2/2, white);
for (i=size1;i<(h/2);i=i+size1)
	draw_circle(sl, w, h, ar, w/2, h/2, i-size2/2, i+size2/2, white);
}

//---------------------------------------------------------
//draws image edge markers
void robovi(unsigned char *sl, int w, int h)
{
int i,j,l;
unsigned char black,white;

black=0;
white=255;

for (i=0;i<(w*h);i++) sl[i]=black;	//black background

draw_wedge(sl, w, h, w/4, 0, 50, 1, white);
draw_wedge(sl, w, h, 3*w/4, 0, 50, 1, white);

draw_wedge(sl, w, h, w-1, h/4, 50, 2, white);
draw_wedge(sl, w, h, w-1, 3*h/4, 50, 2, white);

draw_wedge(sl, w, h, w/4, h-1, 50, 3, white);
draw_wedge(sl, w, h, 3*w/4, h-1, 50, 3, white);

draw_wedge(sl, w, h, 0, h/4, 50, 4, white);
draw_wedge(sl, w, h, 0, 3*h/4, 50, 4, white);

for (i=0;i<50;i++)
	{
	l=(i%10)*10+10;
	for (j=w/2-50;j<w/2-50+l;j++)
		{
		sl[i*w+w-j-1]=white;
		sl[(h-i-1)*w+j]=white;
		}
	for (j=h/2-50;j<h/2-50+l;j++)
		{
		sl[j*w+i]=white;
		sl[(h-j-1)*w+w-i-1]=white;
		}
	}
}

//----------------------------------------------------------
//draws centered pixel rulers
void rulers(unsigned char *sl, int w, int h, unsigned char *a)
{
int i;
unsigned char black,white,tr;

black=0;
white=255;
tr=200;		//how opaque are the marks

for (i=0;i<(w*h);i++) sl[i]=black;	//black background
for (i=0;i<(w*h);i++) a[i]=0;		//transparent

for (i=w/2; i<w; i=i+2)
	{
	draw_rectangle(sl,w,h,i,h/2,1,1,white);
	draw_rectangle(sl,w,h,w-i,h/2-1,1,1,white);
	draw_rectangle(a,w,h,i,h/2,1,1,tr);
	draw_rectangle(a,w,h,w-i,h/2-1,1,1,tr);
	}

for (i=w/2+10; i<w; i=i+10)
	{
	draw_rectangle(sl,w,h,i,h/2,1,3,white);
	draw_rectangle(sl,w,h,w-i,h/2-3,1,3,white);
	draw_rectangle(a,w,h,i,h/2,1,3,tr);
	draw_rectangle(a,w,h,w-i,h/2-3,1,3,tr);
	}

for (i=w/2+50; i<w; i=i+50)
	{
	draw_rectangle(sl,w,h,i,h/2,1,5,white);
	draw_rectangle(sl,w,h,w-i,h/2-5,1,5,white);
	draw_rectangle(a,w,h,i,h/2,1,5,tr);
	draw_rectangle(a,w,h,w-i,h/2-5,1,5,tr);
	}

for (i=w/2+100; i<w; i=i+100)
	{
	draw_rectangle(sl,w,h,i,h/2,1,10,white);
	draw_rectangle(sl,w,h,w-i,h/2-10,1,10,white);
	draw_rectangle(a,w,h,i,h/2,1,10,tr);
	draw_rectangle(a,w,h,w-i,h/2-10,1,10,tr);
	}

for (i=h/2; i<h; i=i+2)
	{
	draw_rectangle(sl,w,h,w/2-1,i,1,1,white);
	draw_rectangle(sl,w,h,w/2,h-i,1,1,white);
	draw_rectangle(a,w,h,w/2-1,i,1,1,tr);
	draw_rectangle(a,w,h,w/2,h-i,1,1,tr);
	}

for (i=h/2+10; i<h; i=i+10)
	{
	draw_rectangle(sl,w,h,w/2-3,i,3,1,white);
	draw_rectangle(sl,w,h,w/2,h-i,3,1,white);
	draw_rectangle(a,w,h,w/2-3,i,3,1,tr);
	draw_rectangle(a,w,h,w/2,h-i,3,1,tr);
	}

for (i=h/2+50; i<h; i=i+50)
	{
	draw_rectangle(sl,w,h,w/2-5,i,5,1,white);
	draw_rectangle(sl,w,h,w/2,h-i,5,1,white);
	draw_rectangle(a,w,h,w/2-5,i,5,1,tr);
	draw_rectangle(a,w,h,w/2,h-i,5,1,tr);
	}

for (i=h/2+100; i<h; i=i+100)
	{
	draw_rectangle(sl,w,h,w/2-10,i,10,1,white);
	draw_rectangle(sl,w,h,w/2,h-i,10,1,white);
	draw_rectangle(a,w,h,w/2-10,i,10,1,tr);
	draw_rectangle(a,w,h,w/2,h-i,10,1,tr);
	}

}

//----------------------------------------------------------
//draws a transparent measurement grid
//*a = alpha channel
void grid(unsigned char *sl, int w, int h, unsigned char *a)
{
int i,j;
unsigned char black,white,tr;

black=0;
white=255;
tr=200;		//how opaque are the marks

for (i=0;i<(w*h);i++) sl[i]=black;	//black background
for (i=0;i<(w*h);i++) a[i]=0;		//transparent

for (i=0;i<h;i=i+2)
	for (j=0;j<w;j=j+10)
		{
		sl[i*w+j]=white;
		a[i*w+j]=tr;
		}
for (i=0;i<h;i=i+10)
	for (j=0;j<w;j=j+2)
		{
		sl[i*w+j]=white;
		a[i*w+j]=tr;
		}

for (i=0;i<h;i=i+50)
	for (j=0;j<w;j=j+50)
		{
		draw_rectangle(sl,w,h,i,j-1,1,3,white);
		draw_rectangle(sl,w,h,i-1,j,3,1,white);
		draw_rectangle(a,w,h,i,j-1,1,3,tr);
		draw_rectangle(a,w,h,i-1,j,3,1,tr);
		}

for (i=0;i<h;i=i+100)
	for (j=0;j<w;j=j+100)
		{
		draw_rectangle(sl,w,h,i,j-4,1,9,white);
		draw_rectangle(sl,w,h,i-4,j,9,1,white);
		draw_rectangle(sl,w,h,i-1,j-1,3,3,white);
		draw_rectangle(a,w,h,i,j-4,1,9,tr);
		draw_rectangle(a,w,h,i-4,j,9,1,tr);
		draw_rectangle(a,w,h,i-1,j-1,3,3,tr);
		}

}
//----------------------------------------------------
//marks the four quadrants with different colors
//COLOR MODEL DEPENDENT!
void kvadranti(uint32_t *sl, int w, int h, int neg)
{
uint32_t c1,c2,c3,c4;
int i,j;

//RGBA8888 little endian, opaque
if (neg==0)
	{
	c1=0xFF10F010;	//green
	c2=0xFF10F0F0;	//yellow
	c3=0xFFF01010;	//blue
	c4=0xFF1010F0;	//red
	}
else
	{
	c1=0xFFF010F0;	//magenta
	c2=0xFFF01010;	//blue
	c3=0xFF10F0F0;	//yellow
	c4=0xFFF0F010;	//cyan
	}

for (i=0;i<h/2;i++)
	{
	for (j=0;j<w/2;j++) sl[i*w+j]=c1;
	for (j=w/2;j<w;j++) sl[i*w+j]=c2;
	}
for (i=h/2;i<h;i++)
	{
	for (j=0;j<w/2;j++) sl[i*w+j]=c3;
	for (j=w/2;j<w;j++) sl[i*w+j]=c4;
	}

}

//-----------------------------------------------------
//makes a table used for conversion of the char*
//intermediate image into the required color model
//alpha = 0  (transparent!)
//COLOR MODEL DEPENDENT!
void make_char2color_table(uint32_t *c2c, int neg)
{
unsigned int i;

if (neg==0)
	for (i=0;i<256;i++)
		c2c[i]=((i&0xFF)<<0)+((i&0xFF)<<8)+((i&0xFF)<<16);
else
	for (i=0;i<256;i++)
		c2c[255-i]=((i&0xFF)<<0)+((i&0xFF)<<8)+((i&0xFF)<<16);

}

//-----------------------------------------------------
//stretch [0...1] to parameter range [min...max] linear
float map_value_forward(double v, float min, float max)
{
return min+(max-min)*v;
}

//-----------------------------------------------------
//collapse from parameter range [min...max] to [0...1] linear
double map_value_backward(float v, float min, float max)
{
return (v-min)/(max-min);
}

//-----------------------------------------------------
//stretch [0...1] to parameter range [min...max] logarithmic
//min and max must be positive!
float map_value_forward_log(double v, float min, float max)
{
float sr,k;

sr=sqrtf(min*max);
k=2.0*log(max/sr);
return sr*expf(k*(v-0.5));
}

//-----------------------------------------------------
//collapse from parameter range [min...max] to [0...1] logarithmic
//min and max must be positive!
double map_value_backward_log(float v, float min, float max)
{
float sr,k;

sr=sqrtf(min*max);
k=2.0*log(max/sr);
return logf(v/sr)/k+0.5;
}

//**************************************************
//obligatory frei0r stuff follows

//------------------------------------------------
//this structure holds an instance of the test_pat_G plugin
typedef struct
{
  unsigned int w;
  unsigned int h;

  int type;
  int size1;
  int size2;
  int aspt;
  float mpar;
  int neg;

  float par;
  unsigned char *sl;
  unsigned char *alpha;
  uint32_t *c2c;

} tp_inst_t;

//----------------------------------------------------
int f0r_init()
{
  return 1;
}

//--------------------------------------------------
void f0r_deinit()
{ /* no initialization required */ }

//--------------------------------------------------
void f0r_get_plugin_info(f0r_plugin_info_t* tp_info)
{
  tp_info->name           = "test_pat_G";
  tp_info->author         = "Marko Cebokli";
  tp_info->plugin_type    = F0R_PLUGIN_TYPE_SOURCE;
//  tp_info->plugin_type    = F0R_PLUGIN_TYPE_FILTER;
  tp_info->color_model    = F0R_COLOR_MODEL_RGBA8888;
  tp_info->frei0r_version = FREI0R_MAJOR_VERSION;
  tp_info->major_version  = 0;
  tp_info->minor_version  = 2;
  tp_info->num_params     = 6;
  tp_info->explanation    = "Generates geometry test pattern images";
}

//--------------------------------------------------
void f0r_get_param_info(f0r_param_info_t* info, int param_index)
{
  switch (param_index)
    {
    case 0:
      info->name        = "Type";
      info->type        = F0R_PARAM_DOUBLE;
      info->explanation = "Type of test pattern"; break;
    case 1:
      info->name        = "Size 1";
      info->type        = F0R_PARAM_DOUBLE;
      info->explanation = "Size of major features"; break;
    case 2:
      info->name        = "Size 2";
      info->type        = F0R_PARAM_DOUBLE;
      info->explanation = "Size of minor features"; break;
    case 3:
      info->name        = "Negative";
      info->type        = F0R_PARAM_BOOL;
      info->explanation = "Polarity of image"; break;
    case 4:
      info->name	="Aspect type";
      info->type	= F0R_PARAM_DOUBLE;
      info->explanation = "Pixel aspect ratio presets";
      break;
    case 5:
      info->name	= "Manual Aspect";
      info->type	= F0R_PARAM_DOUBLE;
      info->explanation = "Manual pixel aspect ratio";
      break;
    }
}

//--------------------------------------------------
f0r_instance_t f0r_construct(unsigned int width, unsigned int height)
{
  tp_inst_t* inst = calloc(1, sizeof(*inst));
  inst->w  = width; 
  inst->h = height;

  inst->type=0;
  inst->size1=72;
  inst->size2=4;
  inst->aspt=0;
  inst->mpar=1.0;
  inst->neg=0;

  inst->par=1.0;
  inst->sl=(unsigned char*)calloc(width*height,1);
  inst->alpha=(unsigned char*)calloc(width*height,1);
  inst->c2c=(uint32_t *)calloc(256,sizeof(uint32_t));

  make_char2color_table(inst->c2c,inst->neg);
  sah1(inst->sl, inst->w, inst->h, inst->size1, inst->par, 0);

  return (f0r_instance_t)inst;
}

//--------------------------------------------------
void f0r_destruct(f0r_instance_t instance)
{
  tp_inst_t* inst = (tp_inst_t*)instance;

  free(inst->sl);
  free(inst->alpha);
  free(inst->c2c);
  free(inst);
}

//--------------------------------------------------
void f0r_set_param_value(f0r_instance_t instance, f0r_param_t param, int param_index)
{
  tp_inst_t* inst = (tp_inst_t*)instance;

  f0r_param_double* p = (f0r_param_double*) param;

  int chg,tmpi;
  float tmpf;

  chg=0;
  switch (param_index)
    {
    case 0:	//type
      tmpf=*((double*)p);
      if (tmpf>=1.0)
        tmpi=(int)tmpf;
      else
        tmpi = map_value_forward(tmpf, 0.0, 12.9999);
      if ((tmpi<0)||(tmpi>12.0)) break;
      if (inst->type != tmpi) chg=1;
      inst->type = tmpi;
      break;
    case 1:	//size 1
      tmpi = map_value_forward(*((double*)p), 0.0, 256.0);
      if (inst->size1 != tmpi) chg=1;
      inst->size1 = tmpi;
      break;
    case 2:	//size 2
      tmpi = map_value_forward(*((double*)p), 0.0, 64.0);
      if (inst->size2 != tmpi) chg=1;
      inst->size2 = tmpi;
      break;
    case 3:	//negative
      tmpi = map_value_forward(*((double*)p), 0.0, 1.0);
      if (inst->neg != tmpi) chg=1;
      inst->neg = tmpi;
      make_char2color_table(inst->c2c,inst->neg);
      break;
    case 4:	//aspect type
      tmpf=*((double*)p);
      if (tmpf>=1.0)
        tmpi=(int)tmpf;
      else
        tmpi = map_value_forward(*((double*)p), 0.0, 6.9999);
      if ((tmpi<0)||(tmpi>6.0)) break;
      if (inst->aspt != tmpi) chg=1;
      inst->aspt = tmpi;
      switch (inst->aspt)	//pixel aspect ratio
        {
        case 0: inst->par=1.000;break;		//square pixels
        case 1: inst->par=1.067;break;		//PAL DV
        case 2: inst->par=1.455;break;		//PAL wide
        case 3: inst->par=0.889;break;		//NTSC DV
        case 4: inst->par=1.212;break;		//NTSC wide
        case 5: inst->par=1.333;break;		//HDV
        case 6: inst->par=inst->mpar;break;	//manual
        }
      break;
    case 5:	//manual aspect
      tmpf = map_value_forward_log(*((double*)p), 0.5, 2.0);
      if (inst->mpar !=tmpf) chg=1;
      inst->mpar = tmpf;
      if (inst->aspt==4) inst->par=inst->mpar;
      break;
    }

  if (chg==0) return;

  switch (inst->type)
    {
    case 0:		//checkerboard
      sah1(inst->sl, inst->w, inst->h, inst->size1, inst->par, 0);
      break;
    case 1:		//checkerboard with border
      sah1(inst->sl, inst->w, inst->h, inst->size1, inst->par, 1);
      break;
    case 2:		//horizontal lines
      hlines(inst->sl, inst->w, inst->h, inst->size1, inst->size2, inst->par, 1);
      break;
    case 3:		//vertical lines
      vlines(inst->sl, inst->w, inst->h, inst->size1, inst->size2, inst->par, 1);
      break;
    case 4:		//grid
      mreza(inst->sl, inst->w, inst->h, inst->size1, inst->size2, inst->par);
      break;
    case 5:		//points
      pike(inst->sl, inst->w, inst->h, inst->size1, inst->size2, inst->par);
      break;
    case 6:		//bullseye
      tarca(inst->sl, inst->w, inst->h, inst->size1, inst->size2+1, inst->par);
      break;
    case 7:		//edge marks
      robovi(inst->sl, inst->w, inst->h);
      break;
    case 8:		//color quadrants  are drawn in update()
      break;
    case 9:		//pixel rulers
    case 11:
      rulers(inst->sl, inst->w, inst->h, inst->alpha);
      break;
    case 10:		//measurement grid
    case 12:
      grid(inst->sl, inst->w, inst->h, inst->alpha);
      break;
    default:
      break;
    }

}

//-------------------------------------------------
void f0r_get_param_value(f0r_instance_t instance, f0r_param_t param, int param_index)
{
  tp_inst_t* inst = (tp_inst_t*)instance;

  f0r_param_double* p = (f0r_param_double*) param;

  switch (param_index)
    {
    case 0:	//type
      *p = map_value_backward(inst->type, 0.0, 12.9999);
      break;
    case 1:	//size 1
      *p = map_value_backward(inst->size1, 0.0, 256.0);
      break;
    case 2:	//size 2
      *p = map_value_backward(inst->size2, 0.0, 64.0);
      break;
    case 3:	//negative
      *p = map_value_backward(inst->neg, 0.0, 1.0);
      break;
    case 4:	//aspect type
      *p = map_value_backward(inst->aspt, 0.0, 6.9999);
      break;
    case 5:	//manual aspect
      *p = map_value_backward_log(inst->mpar, 0.5, 2.0);
      break;
    }
}

//---------------------------------------------------
//COLOR MODEL DEPENDENT
void f0r_update(f0r_instance_t instance, double time, const uint32_t* inframe, uint32_t* outframe)
{
  int i;

  assert(instance);
  tp_inst_t* inst = (tp_inst_t*)instance;

  switch (inst->type)
    {
    case 0:
    case 1:
    case 2:
    case 3:
    case 4:
    case 5:
    case 6:
    case 7:
    case 9:
    case 10:
      for (i=0;i<(inst->h*inst->w);i++)
        outframe[i]=0xFF000000|inst->c2c[inst->sl[i]];
      break;
    case 8:
      kvadranti(outframe,inst->w,inst->h,inst->neg);
      break;
    case 11:
    case 12:
      for (i=0;i<(inst->h*inst->w);i++)
        outframe[i]=((uint32_t)inst->alpha[i])<<24|inst->c2c[inst->sl[i]];
      break;
    default:
      break;
    }

}