# README for PyPNG
drj@pobox.com
[](https://travis-ci.org/drj11/pypng)
# INTRODUCTION
PNG module for Python. PyPNG is written entirely in Python.
- PyPNG home page: https://github.com/drj11/pypng/
- PyPNG Documentation: https://pythonhosted.org/pypng/
- PyPNG mailing list: https://groups.google.com/forum/#!forum/pypng-users
## QUICK START
import png
png.from_array([[255, 0, 0, 255],
[0, 255, 255, 0]], 'L').save("small_smiley.png")
After that, try `import png` then `help(png)`.
Also, lickable HTML documentation appears in the `html/` directory.
If HTML is no good then you could try the ReST sources
in the `man/` directory.
## INSTALLATION
PyPNG is pure Python and has no dependencies.
It requires either Python 2.6 or Python 3.4 or
any compatible higher version.
The same code runs in both Python 2.x and Python 3.x.
To install PyPNG package via pip use:
pip install pypng
PyPNG comes with a `setup.py` script to use with `distutils`.
After unpacking the distribution,
`cd` into the directory and execute the command:
python setup.py install
The `png` module will be installed;
`import png` will allow you to use it from your Python programs.
Alternatively, you can copy `code/png.py` wherever you like.
It's intended that you can copy `png.py` into
your application and distribute it.
The following `curl` command should copy the latest version into
your current directory:
curl -LO https://raw.github.com/drj11/pypng/main/code/png.py
## RELEASE NOTES
(For issues see https://github.com/drj11/pypng/issues?state=open )
### Release 0.0.19
Support for earlier versions of Python is dropped in order to
simplify the code.
From the Python 3.x series all versions from 3.2 onward are supported.
From the 2.x series only Python 2.6 and 2.7 are supported.
Code cleaned.
Tests renamed and more organised.
Generally Flake 8 complient.
Fewer special cases for ancient versions of Python.
The row length is checked when writing PNG files.
Previously it was possible to write badly formed PNG files
by passing in rows of the wrong length.
`pHYS` chunk is now processed.
The `Writer()` interface now supports source pixels
that have a different bitdepth for each channel.
To exploit this, pass in a tuple for the bitdepth argument.
Ancillary tools regularised and simplified.
`pripamtopng` command line tool converts NetPBM PNM/PAM files to PNG.
Previously `png.py` did this.
Note that only one input file is converted,
if you have intensity and opacity in separate files,
you have two options:
either use `pamstack` to convert them into a single PAM file and
convert that, or
convert each file to PNG, then use `priweavepng` to weave them together.
Both will work.
`pripngtopam` command line tool converts PNG to NetPBM PNM/PAM file.
Previously `png.py` did this.
`python -m pngsuite` is now a command line tool to
write various images from the PNG suite of test images.
Previously this was possible using `gen`.
`priweavepng` command line tool performs channel extraction across
multiple images.
This is a more general version of `pipstack` (which has been removed),
and is inspired by `pamstack` from NetPBM.
The `--interlace` option available on many previous tools is
now only available on `priweavepng`,
making it the preferred tool for generating interlaced PNGs.
`prichunkpng` command line tool adds and deletes chunks and
"intelligently" knows about transparent, gamma, background chunks.
It is the preferred tool for adding those chunks,
which was previously possible using various options of other tools.
`gen` has been renamed to `priforgepng`.
`priforgepng` uses centre pixel sampling, which means that a 256 pixel
wide 8-bit gradient takes on all possible 256 values.
It also improves output for very small images.
`priforgepng` uses `Fraction` for internal maths meaning that
the stripe patterns are accurate and do not have loose pixels.
`priforgepng` only outputs greyscale PNG files
(but see next item for a feature to generate colour PNGs).
`priforgepng` can output multiple PNGs onto the same stream.
This aligns well with a feature of `priweavepng` which
accepts multiple PNGs from stdin.
LA, RGB, and RGBA test images can be generated by
piping `priforgepng` into `priweavepng`:
`priforgepng RTL RTR RBR | priweavepng - - -`
will generate an RGB PNG.
### Release 0.0.18
Thanks to `github.com/sean-duffy`,
`.from_array()` can now take a 3D array.
Converting to PNMs was broken in Python 3; this is now fixed.
Github issue 26: https://github.com/drj11/pypng/issues/26
### Release 0.0.17
Various fixes when running on Python 3 and Windows.
Merging pull requests from `github.com/ironfroggy` and
`github.com/techtonik`,
and merging by hand a commit from `github.com/Scondo`.
### Release 0.0.16
Compatible with nose: `nosetests png.py` now works.
Allow any "file-like" object as an input.
Handle newlines in texttopng.
### Release 0.0.15
Fixed various URLs to point at github.com instead of googlecode.
### Release 0.0.14
When using `png.py` as a command line tool,
it can now produce non-square test images.
PyPNG now installs "out of the box" on Python 3 on a plain install
(previously `distribute` or `pip` was required).
PyPNG welcomes the following community contributions:
Joaquín Cuenca Abela speeds up PNG reading when Cython is available.
Josh Bleecher Snyder adds a lenient mode
which has relaxed checksum checking.
nathan@dunfield.info fixed a problem writing files
when using the command line tool on Windows (Issue 62).
The following issues have been fixed:
On github:
Issue 6: Palette processing is annoying
On googlecode:
Issue 62: Problem writing PNG files on Windows
Development has moved from googlecode to github.
All issues below here, and the one immediately above,
are from the googlecode issue tracker.
All newer issue should be on github.
### Release 0.0.13
PyPNG now installs "out of the box" on Python 3.
Thanks to simon.sapin@kozea.fr and nathan@dunfield.info for the patch.
The following issues have been fixed:
Issue 63: setup.py does not use 2to3
Issue 64: Typo in documentation
### Release 0.0.12
PyPNG now works on Python 3 if you use the `2to3` tool.
Fix for converting grey images to RGBA.
The following issues have been fixed:
Issue 60: Greyscale images not properly being converted to RGBA
Issue 61: Doesn't work on Python 3
### Release 0.0.11
Added the "How Fast is PyPNG" section to the documentation.
Changed it so that more PNG formats return their rows as
Python `array.array` instances.
### Release 0.0.10
Fix for read_flat method (broken for ages).
The following issues have been fixed:
Issue 56: read_flat broken
### Release 0.0.9
Tentative fix for a deprecation warning on 64-bit Python 2.5 systems.
Conversion tool for Plan 9 images.
Issue 54 (below) is tentative.
The PyPNG developers have been unable to reproduce the error
(as it seems to be on 64-bit Python 2.5 systems);
any user reports would be most welcome.
The following issues have been fixed:
Issue 54: Deprecation warnings when using pypng.
Issue 55: Cannot convert Plan 9 images.
### Release 0.0.8
Mostly more robust to dodgy input PNGs,
as a result of testing with `brokensuite`.
One fixed bug was a critical:
an infinite loop for a least one input (Issue 52 below).
The following issues have been fixed:
Issue 47: Leading blanks when using write_packed.
Issue 48: pipdither fails when input has no gamma chunk.
Issue 49: pipdither fail with 1-bit input.
Issue 50: pipchunk adds second gamma chunk.
Issue 51: piprgb and pipasgrey fail for color mapped images.
Issue 52: Some inputs cause infinite loop.
### Release 0.0.7
Better documentation (in `html/ex.html` mostly) for NumPy integration.
The following issues have been fixed:
Issue 46: Unclear how to get PNG pixel data into and out of NumPy.
### Release 0.0.6
NumPy integer types now work.
The following issues have been fixed:
Issue 44: Cannot use numpy.uint16 for pixel values.
### Release 0.0.5
`sBIT` chunks are now handled,
meaning that PyPNG can handle any (single) bit depth from 1 to 16
from end to end.
The following issues have been fixed:
Issue 28: Does not add sBIT chunk.
Issue 36: Ignores sBIT chunk when present.
### Release 0.0.4
PyPNG now works on Python 2.2
(significant for Symbian users as PyS60 is based on Python 2.2).
Not all features are supported on Python 2.2.
The following issues have been fixed:
Issue 16: Source and doc uses 'K' where it should use 'L'.
Issue 32: Does not accept packed data.
Issue 33: Cannot create greyscale PNG with transparency.
Issue 35: Does not work on Python 2.2.
### Release 0.0.3
Handling PAM files allows end to end handling of alpha channels in
workflows that involve both Netpbm formats and PNG.
PyPNG now works in Python 2.3.
The following issues have been fixed:
Issue 14: Does not read PAM files.
Issue 15: Does not write PAM files.
Issue 25: Incorrect handling of tRNS chunk.
Issue 26: asRGBA8 method crashes out for color type 2 images.
Issue 27: Fails on Python 2.3.
### Release 0.0.2
Lickable HTML documentation is now provided (see the html/ directory),
generated by Sphinx.
The following issues have been fixed:
Issue 8: Documentation is not lickable.
Issue 9: Advantage over PIL is not clear.
Issue 19: Bogus message for PNM inputs with unsupported maxval
Issue 20: Cannot write large PNG files
### Release 0.0.1
Stuff happened.
## MANIFEST
- .../ - top-level crud (like this README, and setup.py).
- .../code/ - the Python code.
- .../html/ - lickable manuals (generated).
- .../man/ - manuals (in source/plain-text).
- .../proc/ - documented procedures (release procedure).
## REFERENCES
- Python: www.python.org
- PNG: http://www.w3.org/TR/PNG/