==============
pytest-timeout
==============
|python| |version| |anaconda| |ci|
.. |version| image:: https://img.shields.io/pypi/v/pytest-timeout.svg
:target: https://pypi.python.org/pypi/pytest-timeout
.. |anaconda| image:: https://img.shields.io/conda/vn/conda-forge/pytest-timeout.svg
:target: https://anaconda.org/conda-forge/pytest-timeout
.. |ci| image:: https://github.com/pytest-dev/pytest-timeout/workflows/build/badge.svg
:target: https://github.com/pytest-dev/pytest-timeout/actions
.. |python| image:: https://img.shields.io/pypi/pyversions/pytest-timeout.svg
:target: https://pypi.python.org/pypi/pytest-timeout/
**This is not the timeout you are looking for!**
.. warning::
Please read this README carefully and only use this plugin if you
understand the consequences. Remember your test suite needs to be
**fast**, timeouts are a last resort not an expected failure mode.
This plugin will time each test and terminate it when it takes too
long. Termination may or may not be graceful, please see below, but
when aborting it will show a stack dump of all thread running at the
time. This is useful when running tests under a continuous
integration server or simply if you don't know why the test suite
hangs.
.. note::
While by default on POSIX systems pytest will continue to execute
the tests after a test has timed out this is not always possible.
Often the only sure way to interrupt a hanging test is by
terminating the entire process. As this is a hard termination
(``os._exit()``) it will result in no teardown, JUnit XML output
etc. But the plugin will ensure you will have the debugging output
on stderr nevertheless, which is the most important part at this
stage. See below for detailed information on the timeout methods
and their side-effects.
The pytest-timeout plugin has been tested on Python 3.6 and higher,
including PyPy3. See tox.ini for currently tested versions.
Usage
=====
Install is as simple as e.g.::
pip install pytest-timeout
Now you can run the test suite while setting a timeout in seconds, any
individual test which takes longer than the given duration will be
terminated::
pytest --timeout=300
Furthermore you can also use a decorator to set the timeout for an
individual test. If combined with the ``--timeout`` flag this will
override the timeout for this individual test:
.. code:: python
@pytest.mark.timeout(60)
def test_foo():
pass
By default the plugin will not time out any tests, you must specify a
valid timeout for the plugin to interrupt long-running tests. A
timeout is always specified as a number of seconds, and can be
defined in a number of ways, from low to high priority:
1. You can set a global timeout in the `pytest configuration file`__
using the ``timeout`` option. E.g.:
.. code:: ini
[pytest]
timeout = 300
2. The ``PYTEST_TIMEOUT`` environment variable sets a global timeout
overriding a possible value in the configuration file.
3. The ``--timeout`` command line option sets a global timeout
overriding both the environment variable and configuration option.
4. Using the ``timeout`` marker_ on test items you can specify
timeouts on a per-item basis:
.. code:: python
@pytest.mark.timeout(300)
def test_foo():
pass
__ https://docs.pytest.org/en/latest/reference.html#ini-options-ref
.. _marker: https://docs.pytest.org/en/latest/mark.html
Setting a timeout to 0 seconds disables the timeout, so if you have a
global timeout set you can still disable the timeout by using the
mark.
Timeout Methods
===============
Interrupting tests which hang is not always as simple and can be
platform dependent. Furthermore some methods of terminating a test
might conflict with the code under test itself. The pytest-timeout
plugin tries to pick the most suitable method based on your platform,
but occasionally you may need to specify a specific timeout method
explicitly.
If a timeout method does not work your safest bet is to use the
*thread* method.
thread
------
This is the surest and most portable method. It is also the default
on systems not supporting the *signal* method. For each test item the
pytest-timeout plugin starts a timer thread which will terminate the
whole process after the specified timeout. When a test item finishes
this timer thread is cancelled and the test run continues.
The downsides of this method are that there is a relatively large
overhead for running each test and that test runs are not completed.
This means that other pytest features, like e.g. JUnit XML output or
fixture teardown, will not function normally. The second issue might
be alleviated by using the ``--boxed`` option of the pytest-xdist_
plugin.
.. _pytest-xdist: https://pypi.org/project/pytest-xdist/
The benefit of this method is that it will always work. Furthermore
it will still provide you debugging information by printing the stacks
of all the threads in the application to stderr.
signal
------
If the system supports the SIGALRM signal the *signal* method will be
used by default. This method schedules an alarm when the test item
starts and cancels the alarm when the test finishes. If the alarm expires
during the test the signal handler will dump the stack of any other threads
running to stderr and use ``pytest.fail()`` to interrupt the test.
The benefit of this method is that the pytest process is not
terminated and the test run can complete normally.
The main issue to look out for with this method is that it may
interfere with the code under test. If the code under test uses
SIGALRM itself things will go wrong and you will have to choose the
*thread* method.
Specifying the Timeout Method
-----------------------------
The timeout method can be specified by using the ``timeout_method``
option in the `pytest configuration file`__, the ``--timeout_method``
command line parameter or the ``timeout`` marker_. Simply set their
value to the string ``thread`` or ``signal`` to override the default
method. On a marker this is done using the ``method`` keyword:
.. code:: python
@pytest.mark.timeout(method="thread")
def test_foo():
pass
__ https://docs.pytest.org/en/latest/reference.html#ini-options-ref
.. _marker: https://docs.pytest.org/en/latest/mark.html
The ``timeout`` Marker API
==========================
The full signature of the timeout marker is:
.. code:: python
pytest.mark.timeout(timeout=0, method=DEFAULT_METHOD)
You can use either positional or keyword arguments for both the
timeout and the method. Neither needs to be present.
See the marker api documentation_ and examples_ for the various ways
markers can be applied to test items.
.. _documentation: https://docs.pytest.org/en/latest/mark.html
.. _examples: https://docs.pytest.org/en/latest/example/markers.html#marking-whole-classes-or-modules
Timeouts in Fixture Teardown
============================
The plugin will happily terminate timeouts in the finalisers of
fixtures. The timeout specified applies to the entire process of
setting up fixtures, running the tests and finalising the fixtures.
However when a timeout occurs in a fixture finaliser and the test
suite continues, i.e. the signal method is used, it must be realised
that subsequent fixtures which need to be finalised might not have
been executed, which could result in a broken test-suite anyway. In
case of doubt the thread method which terminates the entire process
might result in clearer output.
Avoiding timeouts in Fixtures
=============================
The timeout applies to the entire test including any fixtures which
may need to be setup or torn down for the test (the exact affected
fixtures depends on which scope they are and whether other tests will
still use the same fixture). If the timeouts really are too short to
include fixture durations, firstly make the timeouts larger ;). If
this really isn't an option a ``timeout_func_only`` boolean setting
exists which can be set in the pytest ini configuration file, as
documented in ``pytest --help``.
Debugger Detection
==================
This plugin tries to avoid triggering the timeout when a debugger is
detected. This is mostly a convenience so you do not need to remember
to disable the timeout when interactively debugging.
The way this plugin detects whether or not a debugging session is
active is by checking if a trace function is set and if one is, it
check to see if the module it belongs to is present in a set of known
debugging frameworks modules OR if pytest itself drops you into a pdb
session using ``--pdb`` or similar.
Extending pytest-timeout with plugings
======================================
``pytest-timeout`` provides two hooks that can be used for extending the tool. These
hooks are used for for setting the timeout timer and cancelling it it the timeout is not
reached.
For example, ``pytest-asyncio`` can provide asyncio-specific code that generates better
traceback and points on timed out ``await`` instead of the running loop ieration.
See `pytest hooks documentation
<https://docs.pytest.org/en/latest/how-to/writing_hook_functions.html>`_ for more info
regarding to use custom hooks.
``pytest_timeout_set_timer``
----------------------------
.. code:: python
@pytest.hookspec(firstresult=True)
def pytest_timeout_set_timer(item, settings):
"""Called at timeout setup.
'item' is a pytest node to setup timeout for.
'settings' is Settings namedtuple (described below).
Can be overridden by plugins for alternative timeout implementation strategies.
"""
``Settings``
------------
When ``pytest_timeout_set_timer`` is called, ``settings`` argument is passed.
The argument has ``Settings`` namedtuple type with the following fields:
+-----------+-------+--------------------------------------------------------+
|Attribute | Index | Value |
+===========+=======+========================================================+
| timeout | 0 | timeout in seconds or ``None`` for no timeout |
+-----------+-------+--------------------------------------------------------+
| method | 1 | Method mechanism, |
| | | ``'signal'`` and ``'thread'`` are supported by default |
+-----------+-------+--------------------------------------------------------+
| func_only | 2 | Apply timeout to test function only if ``True``, |
| | | wrap all test function and its fixtures otherwise |
+-----------+-------+--------------------------------------------------------+
``pytest_timeout_cancel_timer``
-------------------------------
.. code:: python
@pytest.hookspec(firstresult=True)
def pytest_timeout_cancel_timer(item):
"""Called at timeout teardown.
'item' is a pytest node which was used for timeout setup.
Can be overridden by plugins for alternative timeout implementation strategies.
"""
``is_debugging``
----------------
When the timeout occurs, user can open the debugger session. In this case, the timeout
should be discarded. A custom hook can check this case by calling ``is_debugging()``
function:
.. code:: python
import pytest
import pytest_timeout
def on_timeout():
if pytest_timeout.is_debugging():
return
pytest.fail("+++ Timeout +++")
Changelog
=========
2.1.0
-----
- Get terminal width from shutil instead of deprecated py, thanks
Andrew Svetlov.
- Add an API for extending ``pytest-timeout`` functionality
with third-party plugins, thanks Andrew Svetlov.
2.0.2
-----
- Fix debugger detection on OSX, thanks Alexander Pacha.
2.0.1
-----
- Fix Python 2 removal, thanks Nicusor Picatureanu.
2.0.0
-----
- Increase pytest requirement to >=5.0.0. Thanks Dominic Davis-Foster.
- Use thread timeout method when plugin is not called from main
thread to avoid crash.
- Fix pycharm debugger detection so timeouts are not triggered during
debugger usage.
- Dropped support for Python 2, minimum pytest version upported is 5.0.0.
1.4.2
-----
- Fix compatibility when run with pytest pre-releases, thanks
Bruno Oliveira,
- Fix detection of third-party debuggers, thanks Bruno Oliveira.
1.4.1
-----
- Fix coverage compatibility which was broken by 1.4.0.
1.4.0
-----
- Better detection of when we are debugging, thanks Mattwmaster58.
1.3.4
-----
- Give the threads a name to help debugging, thanks Thomas Grainger.
- Changed location to https://github.com/pytest-dev/pytest-timeout
because bitbucket is dropping mercurial support. Thanks Thomas
Grainger and Bruno Oliveira.
1.3.3
-----
- Fix support for pytest >= 3.10.
1.3.2
-----
- This changelog was ommitted for the 1.3.2 release and was added
afterwards. Apologies for the confusion.
- Fix pytest 3.7.3 compatibility. The capture API had changed
slightly and this needed fixing. Thanks Bruno Oliveira for the
contribution.
1.3.1
-----
- Fix deprecation warning on Python 3.6. Thanks Mickaël Schoentgen
- Create a valid tag for the release. Somehow this didn't happen for
1.3.0, that tag points to a non-existing commit.
1.3.0
-----
- Make it possible to only run the timeout timer on the test function
and not the whole fixture setup + test + teardown duration. Thanks
Pedro Algarvio for the work!
- Use the new pytest marker API, Thanks Pedro Algarvio for the work!
1.2.1
-----
- Fix for pytest 3.3, thanks Bruno Oliveira.
- Update supported python versions:
- Add CPython 3.6.
- Drop CPyhon 2.6 (as did pytest 3.3)
- Drop CPyhon 3.3
- Drop CPyhon 3.4
1.2.0
-----
* Allow using floats as timeout instead of only integers, thanks Tom
Myers.
1.1.0
-----
* Report (default) timeout duration in header, thanks Holger Krekel.
1.0.0
-----
* Bump version to 1.0 to commit to semantic versioning.
* Fix issue #12: Now compatible with pytest 2.8, thanks Holger Krekel.
* No longer test with pexpect on py26 as it is no longer supported
* Require pytest 2.8 and use new hookimpl decorator
0.5
---
* Timeouts will no longer be triggered when inside an interactive pdb
session started by ``pytest.set_trace()`` / ``pdb.set_trace()``.
* Add pypy3 environment to tox.ini.
* Transfer repository to pytest-dev team account.
0.4
---
* Support timeouts happening in (session scoped) finalizers.
* Change command line option --timeout_method into --timeout-method
for consistency with pytest
0.3
---
* Added the PYTEST_TIMEOUT environment variable as a way of specifying
the timeout (closes issue #2).
* More flexible marker argument parsing: you can now specify the
method using a positional argument.
* The plugin is now enabled by default. There is no longer a need to
specify ``timeout=0`` in the configuration file or on the command
line simply so that a marker would work.
0.2
---
* Add a marker to modify the timeout delay using a @pytest.timeout(N)
syntax, thanks to Laurant Brack for the initial code.
* Allow the timeout marker to select the timeout method using the
``method`` keyword argument.
* Rename the --nosigalrm option to --method=thread to future proof
support for eventlet and gevent. Thanks to Ronny Pfannschmidt for
the hint.
* Add ``timeout`` and ``timeout_method`` items to the configuration
file so you can enable and configure the plugin using the ini file.
Thanks to Holger Krekel and Ronny Pfannschmidt for the hints.
* Tested (and fixed) for python 2.6, 2.7 and 3.2.