1999-03-21 Mark R. Boyns <boyns@doit.org>
* fixed Makefile dependencies and shared library builds.
1999-03-09 Mark R. Boyns <boyns@doit.org>
* rptp/rptp.c: added monitor support
support for GNU readline
display progress info for get, put, and monitor
* rplayd/connection.c: monitor support
* rplayd/rplayd.c: added audio monitor support
* rplayd/command: added rptp monitor command
* rplayd/host.c: added "m" monitor access
1999-03-02 Mark R. Boyns <boyns@doit.org>
* devrplay/devrplay.c: new fake /dev/dsp hack based on esddsp.
1998-11-10 Mark R. Boyns <boyns@doit.org>
* rptp/rptp.c: added set command.
1998-11-06 Mark R. Boyns <boyns@doit.org>
* rplayd: fixed SNPRINTF code and other potential buffer overflow
problems.
1998-10-15 Mark R. Boyns <boyns@doit.org>
* Version 3.3.1 released.
1998-09-05 Mark R. Boyns <boyns@doit.org>
* rplayd/connection.c (connection_update): fixed bus error when
connections close other connections at the wrong time.
1998-09-02 Mark R. Boyns <boyns@doit.org>
* rplayd/audio/audio_*.c (rplay_audio_open): enabled close-on-exec
on rplay_audio_fd to fix mp3 helper bug.
1998-07-14 Mark R. Boyns <boyns@doit.org>
* rplayd/sound.c: improved header parsing.
1998-06-29 Mark R. Boyns <boyns@doit.org>
* Version 3.3.0 released.
1998-06-18 Mark R. Boyns <boyns@doit.org>
* etc: include sample config files.
* configure.in: add --enable-rplayd-user=USER and
--enable-rplayd-group=GROUP.
1998-06-17 Mark R. Boyns <boyns@doit.org>
* removed xrplay.
* include/config.h.in: define AUTO_REREAD by default.
* use rx.
1998-06-16 Mark R. Boyns <boyns@doit.org>
* rplayd/rplayd.c: added --user and --group options and
RPLAYD_USER and RPLAYD_GROUP config.h options.
1998-06-11 Mark R. Boyns <boyns@doit.org>
* doc/rplay.helpers.5: new man page.
* rplay/rplay.c: handle broken pipe better.
* rplayd/command.c: added helper support.
* rplayd/spool.c: added helper support.
* rplayd/rplayd.c: added helper support.
* rplayd/sound.c: added helper support.
* rplayd/helper.c: new file to maintain helper application
information. New config file rplay.helpers.
1998-06-03 Mark R. Boyns <boyns@doit.org>
* rplayd/rplayd.c (doit): make sure the timer starts.
(doit): keep trying to open the audio device.
* rplayd/timer.c (timer_update): approximate getospace to keep
things going.
1998-03-08 Mark Boyns <boyns@sdsu.edu>
* rplayd/sound.c (sound_read): allow directories in rplay.conf.
When found, all files in a directory are made available to rplayd.
1997-12-24 Mark Boyns <boyns@sdsu.edu>
* rplayd/sound.c (sound_open): ditto
* rplayd/cache.c (cache_create): ditto
* rplayd/rplayd.c (doit): ditto
* rplayd/connection.c: use EAGAIN with EINTR.
1997-12-23 Mark Boyns <boyns@sdsu.edu>
* contrib/xjukebox-0.9/rptpstuff.c: fixed enough to work with
recent versions of rplay.
* doc/xrplay.1.in: updated
* doc/rptp.1.in: updated
* doc/rplayd.8.in: updated
* doc/rplay.1.in: updated
* doc/rplay.texi: updated
1997-12-22 Mark Boyns <boyns@sdsu.edu>
* adpcm: build encode and decode as g72xencode and g72xdecode.
Also include simple man pages.
* perl/Mailsound.1: new file
* Applied 64-bit Linux/Alpha patches from Martin Ostermann.
1997-12-21 Mark Boyns <boyns@sdsu.edu>
* doc/Makefile.in (man): use rplayd.8 instead of rplayd.1.
* rplayd/command.c (command_quit): close later
1997-12-16 Mark Boyns <boyns@sdsu.edu>
* rplayd/rplayd.c (usage): added --inetd option which must be
specified when rplayd is run via inetd.
1997-12-13 Mark Boyns <boyns@sdsu.edu>
* include/config.h.in (SNPRINTF): use snprintf and vsnprintf in
rplayd if available.
* rplayd/Makefile.in (install): install rplayd in $prefix/sbin.
* rplayd/rplayd.c (usage): --fork and --no-fork options. When not
in debug or inetd mode, rplayd will fork to put itself in the
background.
1997-12-07 Mark Boyns <boyns@sdsu.edu>
* rplayd/rplayd.c: tilde expand RPLAY_* config files from
config.h.
1997-12-06 Mark Boyns <boyns@sdsu.edu>
* rplayd/rplayd.c (usage): New --audio-fragsize option.
* rplayd/timer.c (timer_update): Linux/OSS fixes.
* rplayd/cdrom.c: Linux cdrom support.
* rplayd/audio/audio_oss.c: New driver for Linux/OSS.
Thu Nov 7 17:29:12 1996 Mark Boyns <boyns@sdsu.edu>
* Version 3.2.0 beta6 released.
* rplayd/audio/audio_linux.c: Applied Linux audio patches from
sinster@scintilla.darkwater.com (Darren Senn). He says this patch
greatly improves audio under Linux.
* xrplay: Updated for XForms 0.81.
* include/config.h.in (RPLAY_CACHE): Change from
"/tmp/rplay.cache" to "/tmp/.rplay-cache".
Tue Nov 5 14:51:44 1996 Mark Boyns <boyns@sdsu.edu>
* rplayd/sound.c (sound_map): Fixed .wav file parsing from
Mark Rawling <Mark.Rawling@mel.dit.csiro.au>.
Mon Jun 3 16:08:35 1996 Mark Boyns <boyns@sdsu.edu>
* rplayd/sound.c (sound_map): Support 16-bit .voc files, I think.
Mon Apr 22 09:53:32 1996 Mark Boyns <boyns@sdsu.edu>
* rplayd/native.c (x_to_native): Added oversampling patches from
Andrew Scherpbier.
Sun Apr 21 09:35:18 1996 Mark Boyns <boyns@sdsu.edu>
* rplay/rplay.c (doit): Pretend rplayd can get unknown sounds
from another rplayd.
* rplayd/sound.c (sound_fill): don't uncompress/decode sounds when
sending to another rplayd or RPTP client.
Thu Feb 29 13:54:09 1996 Mark Boyns <boyns@sdsu.edu>
* rplayd/spool.c (spool_remove): use spool_done to report RPTP
events.
Thu Feb 8 14:53:04 1996 Mark Boyns <boyns@sdsu.edu>
* rplayd/sound.c (sound_map): Didn't play the first few samples of
flows.
Thu Feb 1 15:38:48 1996 Mark Boyns <boyns@sdsu.edu>
* Version 3.2.0 beta5 released.
* rplayd/rplayd.c (handle_sigchld): Use waitpid instead of wait3.
Use wait if waitpid doesn't exist.
* rplayd/sound.c (sound_map): Fixed problem with wav files that
have weird sound_chunk_sizes.
Tue Jan 30 14:31:36 1996 Mark Boyns <boyns@sdsu.edu>
* Version 3.2.0 beta4 released.
* doc: Updated some of the man pages with new options.
* contrib/Mailsound: New "mailsound" program called `Mailsound'
which uses the new RPlay.pm perl 5 module. See the
contrib/Mailsound directory for more information.
Mon Jan 29 14:50:22 1996 Mark Boyns <boyns@sdsu.edu>
* rplayd/rplayd.c (usage): New options --cdrom0=DEVICE,
--cdrom1=DEVICE, --cdrom2=DEVICE, and --cdrom3=DEVICE. These
change the default cdrom devices specified in rplayd/cdrom.c.
Currently `/vol/dev/aliases/cdrom0' is used for cdrom0, etc.
* rplayd/cdrom.c: The new CDROM support requires no modifications
to RPLAY/RPTP clients. CD tracks can be played using the special
`cdrom:' prefix followed by a range of tracks or none for all
tracks. `rplay cdrom:1-5' will play tracks 1 through 5,
`rplay cdrom:4' will play track 4, and `rplay cdrom:' will play
the entire CD. Other CDROM devices will be known as `cdrom1:',
`cdrom2:', etc. `cdrom:' is the same as `cdrom0:'.
Tue Jan 23 15:42:24 1996 Mark Boyns <boyns@sdsu.edu>
* rplayd/cdrom.c: rplayd can now read audio directly from a CDROM
using the Solaris 2.x CDDA interface. This work was inspired by
the read_cdda program written by Jim Mintha (mintha@geog.ubc.ca).
rplayd uses a child process to read from the CDROM and uses a pipe
to read the data (similar to a flow). Support for other CDROM
devices only requires modifications to the file `cdrom.c'. If
you've got Solaris 2.x, put your favorite CD in the CDROM and
execute `rplay cdrom:'. Don't forget to crank up the volume.
Fri Jan 19 11:45:32 1996 Mark Boyns <boyns@sdsu.edu>
* rplayd/rplayd.c: Use `sigset' instead of `signal'. (Solaris fix)
Fri Dec 22 17:58:07 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/sound.c (sound_cleanup): Don't free memory used by sounds
that are (paused) in the spool.
* rplay/rplay.c: `rplay' now always uses single-put flows to send
audio data. Removed asynchronous code.
Thu Aug 31 15:09:50 1995 Mark Boyns <boyns@sdsu.edu>
* xrplay/xrplay_main.c (main): Ignore SIGPIPE.
* xrplay: Added headphone, speaker, and lineout buttons to XRPlay.
Wed Aug 30 14:50:23 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/command.c (command_set): `audio-port' can now be
specified with the RPTP set command. This allows applications to
easily change between speaker, headphone, etc., ports.
(command_set): `audio-info' can now be set with the RPTP set
command. This allows applications to change the audio parameters
of the audio device.
* Removed the `site' and `samples' directories.
* rplayd/sound.c (sound_map): Fixed clicks at the end of .wav
files and possibly .aiff files.
Thu Aug 10 15:36:48 1995 Mark Boyns <boyns@sdsu.edu>
* The rplay source tree has been modified to support compiling for
multiple architectures. See the INSTALL.generic file for more
details.
* gsm: The GSM source tree has been transformed into something
that easier for rplay to use. See gsm/README.rplay for more
details.
* librplay/rplay.c: RPLAY packets can now send audio data to
rplayd. Here's an example:
rp = rplay_create (RPLAY_PUT);
rplay_set (rp, RPLAY_ID, id);
rplay_set (rp, RPLAY_SEQUENCE, sequence++);
rplay_set (rp, RPLAY_DATA, buffer, nbytes);
rplay (rplay_fd, rp);
This example assumes that a single-put flow has been started using
the RPTP play and put commands with the spool id saved in id.
* include/rplay.h: New RPLAY command RPLAY_PUT. New attributes
for this command are RPLAY_ID, RPLAY_SEQUENCE, RPLAY_DATA,
RPLAY_DATA_SIZE.
Tue Jul 25 15:38:16 1995 Mark Boyns <boyns@sdsu.edu>
* xrplay/gui.c (set_object_gray_state): Updated xrplay to work
with the latest version of XForms.
Sun Jul 23 23:35:33 1995 Mark Boyns <boyns@sdsu.edu>
* INSTALL: Support Emacs' outline-mode.
Sat Jul 22 12:18:02 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/rplayd.c: New --audio-info (--info, -i) option to specify
the audio configuration easily. Also available is
--audio-info-ulaw (--info-ulaw).
Thu Jul 13 16:14:46 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/rplayd.c: New `~/.rplaydrc' which can contain a default
set of rplayd command line options. rplayd reads this file before
parsing any command line options. The file can contain any
option specified in `rplayd --help'. For example:
##
## Sample .rplaydrc
##
--audio-match
--audio-close=0
--options-file=/tmp/rplayd.options
--servers=/usr/local/etc/rplay.servers
--hosts=/usr/local/etc/rplay.hosts
--conf=/usr/local/etc/rplay.conf
The default rc file can be changed in include/config.h.
Sun Jul 9 23:07:23 1995 Mark Boyns <boyns@sdsu.edu>
* xrplay/io.c (read_proc): Fixed bug which caused xrplay to abort
when the server connection was lost.
Sat Jul 8 11:01:58 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/host.c (host_read): Automatically add access for the
local host when AUTH is defined in config.h and a rplay.hosts file
doesn't exist.
* rplayd/rplayd.c (handle_sigint): rplayd now catches SIGINT and
exits normally when it's received.
Thu Jul 6 10:05:15 1995 Mark Boyns <boyns@sdsu.edu>
* rplay/rplay.c: New RPTP flow code which is completely
asynchronous and improves stdin performance. `rplay' will use the
new single-put flow method when using stdin.
* rplayd: RPTP flows now support a single-put protocol to avoid
extra network traffic. A single-put flow is started by using
`size=0' with the RPTP put command. After a receiving a
successful put response, the RPTP client can then send a
continuous stream of audio data which is terminated by closing the
RPTP connection.
* rplay/rplay.c: Changed the --info format from
8000,ulaw,8,1,big-endian,offset to
ulaw,8000,8,1,big-endian,offset. Now the format is listed first
instead of sample-rate. GSM --info should be specified as
`--info=gsm,8000'; the remaining arguments are not required and
really don't make much sense for GSM.
Thu Jun 29 09:13:33 1995 Mark Boyns <boyns@sdsu.edu>
* adpcm: Also build `encode' and `decode' to help users create
their own G.72x files.
* gsm: New directory containing the sources for GSM version 1.0.7.
Support for GSM compressed audio files has been added to rplay.
GSM is a lossy sound compression algorithm that effectively
compresses 16 bit audio to 1.65 bit -- very impressive. GSM is
ideal for low bandwidth links since it only needs 1650 bytes/sec
for 8000hz audio, and half that for 4000hz. Use the `toast'
program in gsm/bin to create your own .gsm files. Thanks to
Jutta Degener (jutta@cs.tu-berlin.de) and
Carsten Bormann (cabo@cs.tu-berlin.de)
for GSM and to Germano Caronni <caronni@tik.ethz.ch> for telling
me about GSM.
* rplayd/audio/audio_FreeBSD.c: New FreeBSD audio code contributed
by Andreas S. Wetzel <mickey@deadline.snafu.de>.
Mon Jun 26 15:08:03 1995 Mark Boyns <boyns@sdsu.edu>
* rplay/rplay.c: Removed option `--no-flows'. Changed the way
`rplay' determines which protocol to use. The default protocol to
be used is determined by checking whether or not the server has
local access to the specified sounds. RPLAY is used when sounds
are accessible, otherwise RPTP and possibly flows are used. RPLAY
will also be used when sound accessibility cannot be determined.
New options `--rplay' and `--rptp' can be used to force the use of
a specific protocol.
* rplayd/rplayd.c (do_option): New option `--remove-cache' which
forces rplayd to remove the rplay.cache and its contents when it
exits. The rplay.cache directory will always be removed if it's
empty.
* rplayd/cache.c (cache_init): Changed default rplay.cache
directory permissions from 0755 to 0777.
(cache_cleanup): New function to remove the cache directory
and all its contents. Suggested by Johan Ramestam (pt93jr@pt.hk-r.se).
(cache_create): Changed default rplay.cache file permissions from
0644 to 0666.
Wed May 31 16:27:52 1995 Mark Boyns <boyns@sdsu.edu>
* xrplay/xrplay.c: Added a position slider which uses the RPTP
position notify event. Also changed some colors.
* rplay/rplay.c: Removed --flow. `rplay' now uses the RPTP find
command to determine whether or not a flow is really necessary.
Thu May 25 10:15:44 1995 Mark Boyns <boyns@sdsu.edu>
* Version 3.2.0 beta3 released.
* examples/vu.c: New example program that uses XForms and the new
level notification event. Compile this example with vu.Makefile.
* examples/pos.c: New example program that uses XForms and the new
position notification event. Compile this example with
pos.Makefile.
* xrplay: Added a new version of XRPlay written by Andrew
Scherpbier <Andrew@sdsu.edu> using XForms.
Sun May 7 12:51:48 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/connection.c (connection_notify): Added audio file/flow
position notification. This new `position' event can be used to
monitor/display the current sample position of a sound that's
being played.
Sat May 6 12:14:29 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/native.c (level): Added left and right output level
notification. The new `level' notification event is used to
obtain the values of the left and right speakers using the `left'
and `right' attributes. Levels range from 0 to 255, with 255
being the highest/loudest level.
Fri Apr 28 11:42:46 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/native.c: Fixed bug with unsigned 16-bit audio.
Tue Apr 25 10:45:13 1995 Mark Boyns <boyns@sdsu.edu>
* include/config.h.in: Changed RPLAYD_TIMEOUT to 0 which means
that rplayd will no longer timeout by default. inetd users will
probably want to add `-t 360' if the old behavior is desired.
* rplayd/sound.c (sound_clean): New function which is used to
fixes problems with flows been deleted at the wrong time.
Thu Apr 13 11:02:32 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/connection.c (connection_notify): Added
priority-threshold to state notification events.
* xrplay: New `--priority' option which tells xrplay to display
priority-threshold information and allow the user to modify it.
* rplayd/command.c (command_set): Added the `priority-threshold'
attribute to the RPTP set command. The value of
priority-threshold is the minimum priority of a sound that will be
played by rplayd. Sounds with priorities below the threshold are
ignored. The default value is 0.
* rplay/rplay.c (usage): Added the --no-flow option to `rplay'.
Wed Apr 12 15:25:52 1995 Mark Boyns <boyns@sdsu.edu>
* rplay/rplay.c: Added the --buffer-size (-b) option to `rplay' so
the audio buffer size that's flowed to the server can be easily
configured. Sometimes this is necessary when the default of 8k
isn't enough or may even be too much.
* librplay/rptp.c (rptp): Removed this new routine since I decided
that RPLAY and RPTP should not be inter-mixed.
(rptp_parse): Fixed bug which freed internal list objects at an
inconvenient time. Now the current/previous list of name-value
pairs is always kept in memory.
* Now `rplay' can be used to talk to your friends on the internet.
For example, if you and a friend are running rplayd on a Sun with
an amd audio device and a microphone, you can use the following:
hostA$ rplay --host=hostB --info-amd - < /dev/audio
hostB$ rplay --host=hostA --info-amd - < /dev/audio
(see `rplay --help' for more information)
* rplay/rplay.c: Added RPTP flow support to `rplay'. Flows are
now used whenever `rplay' can access any of the specified sounds.
This means that `rplay' can _finally_ do `rplay sound.au' where
sound.au is some sound in the current directory. Previously
`rplay ./sound.au' was required and a flow was not used. If a
sound named `-' is used, `rplay' will read audio data from
standard input and flow it to rplayd. New options --info,
--info-dbri, and --info-cs4231 can be used to describe the audio
data.
Fri Mar 24 11:05:57 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/connection.c (connection_notify): Added
`priority-threshold' to `state' notify events and added it to the
server status attributes.
* rplayd/command.c (command_set): Changed the new `priority'
attribute to `priority-threshold' since that makes more sense.
Tue Mar 21 17:44:00 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/command.c (command_set): Added `set priority=value' RPTP
command. This priority value is used to set the sound priorities
that will be accepted by rplayd. Sounds with priorities less than
VALUE will be ignore. The default priority is 0.
Mon Mar 13 09:54:04 1995 Mark Boyns <boyns@sdsu.edu>
* SGI patches from Rob Kooper which fix errno problems in
rplayd/audio/audio_sgi.c and change configure.in to fail if the
multimedia development kit isn't installed.
Thu Mar 9 09:52:07 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/connection.c (connection_update): Fixed bug reported by
stevejg@wni.com (Steve J. Green).
Thu Mar 2 22:51:29 1995 Mark Boyns <boyns@sdsu.edu>
* librplay/rptp.c (rptp_parse): Skip leading dashes so name-value
parse can look like: name=value, -name=value, or even --name=value.
Tue Feb 21 21:44:32 1995 Mark Boyns <boyns@sdsu.edu>
* Added RPLAY_LIST_NAME / `--list-name' attribute. The value of
this attribute is used to append sounds with the same `list-name'
into the same sound list. For example:
$ rplay --list-name=test raiders
$ rplay --list-name=test jedi
$ rplay --list-name=test Debbie
rplayd will first play `raiders', append `jedi', and then append
`Debbie'. This is the same as:
$ rplay raiders jedi Debbie
* rplay/rplay.c: Added `--rptp' which sends commands using RPTP
instead of RPLAY.
* librplay/rptp.c (rptp): New RPTP library routine
`int rptp (int rptp_fd, RPLAY *rp)' which converts
a RPLAY object into a RPTP command and then sends the
command to the rptp_fd using `rptp_command'. This routine gives
RPTP clients the flexibility of `rplay_get' and `rplay_set'.
Sun Feb 19 10:06:03 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/sound.c (sound_delete): Fixed a nasty bug.
Sat Feb 18 10:56:47 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/rplayd.c (rplayd_play): Added spool_destroy to fix a
"spool full" problem and a possible memory leak.
Thu Feb 16 09:51:59 1995 Mark Boyns <boyns@sdsu.edu>
* xrplay/connect.c: Ultrix <sys/socket.h> fix.
* rplayd/audio/audio_generic.c: Utlrix <fcntl.h> fix.
* site/Makefile.in (install): Fixed `make install' problem for
Ultrix. Thanks nissen@montefiore.ulg.ac.be (Alain Nissen).
* Define MAXHOSTNAMELEN in librplay/rplay.c and rplayd/rplayd.c
if it's not defined in system headers.
Wed Feb 15 17:14:32 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/audio/audio_sun.c (rplay_audio_init): Allow audio port
to really be set to `none'. This fixes problems with 4/4xx and
4/6xx systems running SunOS 4.1.x.
Thanks nissen@montefiore.ulg.ac.be (Alain Nissen).
Fri Feb 10 14:00:02 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/audio/audio_sun.c (rplay_audio_init): Fixed typo where
`rplayd_audio_port' was used instead of `rplay_audio_port'.
Reported by nissen@montefiore.ulg.ac.be (Alain Nissen).
Tue Feb 7 17:27:17 1995 Mark Boyns <boyns@sdsu.edu>
* contrib/tkrplay: Fixed `Configure' problem with tkrplay.
Reported by stevejg@wni.com (Steve J. Green).
Mon Feb 6 16:34:43 1995 Mark Boyns <boyns@sdsu.edu>
* Version 3.2.0 beta2 released.
* xrplay: Added a newer version of xrplay. This version has
several bug fixes and it can use flows to play sounds specified on
its command line. There's still a few known bugs in xrplay that
will be fixed later. Thanks Andrew Scherpbier <Andrew@sdsu.edu>.
Sun Feb 5 10:09:32 1995 Mark Boyns <boyns@sdsu.edu>
* librplay/async.c: Added the RPTP asynchronous I/O system written
by Andrew Scherpbier <Andrew@sdsu.edu>. These library routines
make adding rplay support to asynchronous programs *much* easier.
xrplay and rplaytool have been updated to use these routines.
The examples directory has some async examples.
* examples: Created the `examples' directory. This directory
contains example source code to help demonstrate how to do various
things using librplay.
Fri Feb 3 15:49:58 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/command.c (do_events): RPTP event masks can now be
manipulated using + and - binary operators. For example:
set notify="play,pause,done"
set notify="+continue"
notify would then be "play,pause,done,continue".
set notify="-pause"
notify would then be "play,done,continue".
The default binary operator is `+' which means that events are
always added to the mask. The mask can be reset using:
set notify="none,play,done"
This sets notify to "none" and then assigns "play,done".
* rplayd/audio/audio_solaris.c (dbri_table): New match table.
* rplayd/audio/audio_sun.c (dbri_table): New match table.
* Added `rplaytool' to the contrib directory. See
contrib/rplaytool/README for more information.
Tue Jan 31 15:39:24 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/native.c: Fixed yet another byte-order problem. The
adpcm_decode routines already generate 16-bit audio in the native
format so no byte swapping is necessary.
Fri Jan 27 16:07:26 1995 Mark Boyns <boyns@sdsu.edu>
* librplay/rplay.[ch]: Added the RPLAY_CLIENT_DATA attribute.
This attribute can be used to associate a null-terminated string
with a sound. The RPTP `client-data' attribute will also be added
so clients can associate data with RPTP commands and the command
responses.
Tue Jan 24 21:38:57 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/audio/audio_hpux.c (rplay_audio_init): a few minor
modifications and changed the default output port to the speaker
and headphone. (The original default of headphone was confusing
some people since they couldn't hear anything :)
* Finished adding support for real-time audio flows. The `play'
and `put' RPTP commands have been extended to send audio data to
rplayd.
`play' now accepts the following attributes: input, input-offset,
input-format, input-byte-order, input-sample-rate, input-bits,
input-channels, and input-storage. (Thanks to Hendrik
<J.C.Harrison@ncl.ac.uk> for input-storage). input=flow begins a
flow and the rest of the attributes default to what's contained in
the audio header. input-storage defaults to "none" which tells
rplayd to discard flow data. Setting input-storage to "disk"
tells rplayd to eventually save the flow data to `rplay.cache'.
Flows saved to disk may have unique file names generated by
rplayd.
`put' now accepts the id attribute which tells rplayd where to
store/play the audio data. Note that multiple clients can "put"
data into the same spool entry. (spool sharing?)
The new `done' command is used to terminate a flow. `done' is the
same as `stop' for local audio files.
Tue Jan 17 22:43:14 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/connection.c: `+' responses for RPTP commands are now
guaranteed to *always* come before any `@' responses (events) that
the commands may generate. This helps clients to reliably keep
track of events.
Mon Jan 16 13:22:34 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/connection.c (connection_notify): New RPTP `modify'
event. This event provides notification when spool entries are
modified with the `modify' command.
* rplayd/command.c (command_modify): New RPTP `modify' command
which can be used to modify spool attributes. Currently count,
list-count, priority, sample-rate, and volume can be modified.
Sample rate modification was suggested by Richard Stallman
<rms@gnu.ai.mit.edu>.
* rplayd/native.c (native_table): Fixed byte-order problems.
(check_buffers): Fixed a memory leak.
Sun Jan 15 11:02:47 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/sound.c: Added support for G.721 4-bit, G.723 3-bit, and
G.723 5-bit compressed audio files. Public domain G.72x encoding
and decoding routines written by Sun Microsystems are located in
the new adpcm directory.
Suggested by Germano Caronni <caronni@tik.ethz.ch>
Tue Jan 10 13:29:17 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/audio/audio_sun.c (rplay_audio_init): Now recognize the
SS5 CS4231 audio chip correctly on SunOS 4.1.X.
Thanks John Denune <denune@coyote.lowell.edu>.
Sun Jan 8 22:47:04 1995 Mark Boyns <boyns@sdsu.edu>
* rplay/rplay.c: Disabled GNU getopt permutation of arguments
since order is important.
Sat Jan 7 10:41:30 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/{rplayd.c,spool.c}: Fixed audio matching bug reported
by Germano Caronni <caronni@tik.ethz.ch>.
Tue Jan 3 10:54:35 1995 Mark Boyns <boyns@sdsu.edu>
* rplayd/sound.c (sound_open): now does a lot of what sound_map
used to do.
* rplayd/audio/audio_solaris.c (rplay_audio_init): Added support
for the SUNW,CS4231 device.
(rplay_audio_init): Use AUDIO_INITINFO instead of AUDIO_GETINFO.
Thanks jhempe@broadvision.com (John Hempe).
* rplayd/audio/{audio_sun.c,audio_solaris.c}: Updated `dbri_table'
with more supported audio configurations. Optional settings are
checked in a more consistent manner.
* rplayd/audio/audio_sun.c (rplay_audio_init): Use AUDIO_INITINFO
to initialize audio_info_t instead of AUDIO_GETINFO.
* include/config.h.in: Added `/devices' to BAD_DIRS.
Suggested by Germano Caronni <caronni@tik.ethz.ch>.
Mon Dec 26 11:06:51 1994 Mark Boyns <boyns@sdsu.edu>
* GNU indent'ed rplay, rptp, librplay, and rplayd.
* rplayd/rplayd.c (audio_test): Test supported audio configurations.
Enabled with the new `--audio-test' option.
Sat Dec 24 09:02:34 1994 Mark Boyns <boyns@sdsu.edu>
* rplayd/spool.c (spool_update): Fixed event `done' bug.
* Added new version of xrplay from Andrew Scherpbier
<Andrew@sdsu.edu>. This version fixes the refresh problems
and adds lots of new options. See `xrplay --help' for
more details.
Tue Dec 13 17:04:59 1994 Mark Boyns <boyns@sdsu.edu>
* rplayd/connection.c (connection_notify): Fixed non-ANSI C bug
reported by kooper@cc.gatech.edu (Rob Kooper).
Mon Dec 5 14:09:28 1994 Mark Boyns <boyns@sdsu.edu>
* Version 3.2.0 beta released.
* rplayd/rplayd.c: Added `--options-file=FILE' option
to rplayd. This option allows rplayd options to be
read from the specified filename.
Sun Dec 4 01:25:55 1994 Mark Boyns <boyns@sdsu.edu>
* Merged several typos and grammar errors reported
by Andrew Scherpbier <Andrew@sdsu.edu>.
* doc: Updated RPLAY.html, RPTP.html, and librplay.html.
Automatically create index.html which is a HTML index
of all the HTML documentation. HTML browsers should
startup with index.html.
* include/config.in: Changed the following defaults:
RPLAY_CACHE_SIZE - 8MB
MEMORY_CACHE_SOUND_SIZE - 2MB
MEMORY_CACHE_SIZE - 4MB
* rplayd/audio: Added audio tables to audio_sun.c
audio_solaris.c, and audio_generic.c.
* rplayd/spool.c (spool_play): Improved --audio-match to use
an audio table of supported audio device configurations.
This table is used to choose the closest supported match.
Sat Dec 3 14:57:02 1994 Mark Boyns <boyns@sdsu.edu>
* doc: created the librplay.html document which is a
replacement for README.LIBRPLAY.
* doc: created the RPLAY.html document which describes
the RPLAY protocol and finally explains what's in those
mysterious RPLAY packets.
* doc: man pages and HTML documents are now created automatically
for rplayd, rplay, rptp, and xrplay. These new man pages do not
contain as much information as the previous versions, but they
are now up-to date.
* configure.in: `configure' now accepts the --target
option. This option can be used to force a specific
configuration to be used.
Example: `configure --target=sun'
Fri Dec 2 09:50:07 1994 Mark Boyns <boyns@sdsu.edu>
* configure.in: Add `-laudio' automatically for SGI
systems.
Sun Nov 27 00:09:37 1994 Mark Boyns <boyns@sdsu.edu>
* Started to re-organize the contrib directory.
xvolume and volume have been removed since they have
been replaced by xrplay and `rptp volume'. There's
now a contrib/patches directory which contains all
the window manager patches.
* Hopefully fixed the `install' bug.
* rplayd/sound.c (sound_map): Added MAP_FILE to the mmap flags.
Suggested by Ben Jackson <bj@staff.cc.purdue.edu>.
* rplayd/spool.c (spool_ready): Fixed bug reported by
Germano Caronni <caronni@tik.ethz.ch>. The symptoms were
"Play a long song. While it is playing, load two short samples from
somewhere else. Crash for free."
* rptp/rptp.c: Changed `rptp' to support the new RPTP protocol.
* Changed the initial RPTP connection line to contain
name-value pairs.
* Changed the RPTP status command to return one line
name-value pairs.
* librplay/rptp.c (rptp_parse): New rplay library function
which is used to parse the RPTP name-value pairs. This
function is used as follows:
/* Return the value of `name' where `name=value' is
in the response string. */
value = rptp_parse (response, "name")
/* Same as above but return the value of `name' in
the previously specified response. */
value = rptp_parse (NULL, "name")
/* Return the first `name' in the response `name=value' list. */
name = rptp_parse (response, NULL)
/* Same as above but return the next `name' is the
previously specified response.
name = rptp_parse (NULL, NULL)
* Changed all RPTP commands to support name-value pairs.
Some commands still support the old-style RPTP so
older rplayds can still communicate.
* Added xrplay to the top level rplay source tree.
xrplay was written by Andrew Scherpbier <Andrew@sdsu.edu>
and is a new and improved version xvolume. New features
include bitmap buttons for previous sound, play/pause,
stop, and next sound. xrplay takes full advantage of the
new event notification and the `set' and `skip' commands.
Thanks Andrew!
* Added the RPTP skip command which is used to skip
to sounds in a sound list.
* Added the RPTP set command which is used to set server
attributes. The current attributes that can be set are
application, notify, and volume. The application and volume
commands are now implemented using set. Please avoid using these
commands since they are considered obsolete and may be removed.
* Added RPTP event notification. All events are reported
using a line beginning with `@', followed by name-value pairs.
Event notification can be enabled and disabled using the
RPTP set command. See doc/RPTP.html for more details.
* Changed the RPTP protocol to use name-value pairs for command
arguments and command results. This new and improved RPTP
is documented in doc/RPTP.html and the old README.RPTP
is now obsolete.
Wed Nov 16 11:20:15 1994 Mark Boyns <boyns@sdsu.edu>
* rplayd/audio/audio_*.c (rplay_audio_set_volume): Always
set `rplay_audio_volume' to the volume of the audio device.
Tue Nov 15 20:57:17 1994 Mark Boyns <boyns@sdsu.edu>
* Added BAD_DIRS option to config.h. The value of BAD_DIRS
is a colon separated list of directories that cannot be
accessed by rplayd. The default is "/dev:/etc".
Thu Nov 10 10:35:31 1994 Mark Boyns <boyns@sdsu.edu>
* Added more SGI patches from Rob Kooper. These patches include
fixes for 16-bit audio and an SGI select/timer bug.
Wed Nov 9 17:20:51 1994 Mark Boyns <boyns@sdsu.edu>
* librplay/rplay.c (rplay_ping): Now ping both the port listed in
/etc/services and either RPLAY_PORT or OLD_RPLAY_PORT depending on
which one isn't in /etc/services. This should fix some problems
with inetd that people have been experiencing.
Tue Nov 8 14:15:15 1994 Mark Boyns <boyns@sdsu.edu>
* Version 3.2.0 alpha7 released.
* rplayd/rplayd.c: New option `--audio-match' which
attempts to match the sample rate of the audio device with
the sample rate of the current sound when no other sounds
are playing. If the match fails, --audio-sample-rate is used.
This option overrides --audio-bufsize. This option is currently
not enabled by default, but it may be in the future.
Suggested by Germano Caronni <caronni@tik.ethz.ch> and
Raphael Quinet <quinet@montefiore.ulg.ac.be>.
* rplayd/rplayd.c (rplayd_audio_init): New function used to
(re)initialize the audio device.
Mon Nov 7 11:32:22 1994 Mark Boyns <boyns@sdsu.edu>
* rplayd/sound.c (sound_map): added support for .ub files
which are Macintosh unsigned byte files. .ub files may
also be incorrectly named with a .snd extension.
* rplayd/sound.c (sound_map): added support for .voc files
which is really simple so far. All the .voc files that I've
found seem to work.
* rplayd/command.c (command_status): display audio-port info.
* Added real --audio-port support to audio_sun and audio_solaris.
audio_linux, audio_generic, and audio_sgi simply set
the port to `speaker'. audio_hp already has port support.
* rplayd/rplayd.c: New --audio-port option which can be used
to specify rplayd audio output ports. Valid ports are
`speaker', `headphone', and `lineout'. Suggested by
Hendrik (J.C.Harrison@ncl.ac.uk)
* rplayd/audio/audio_hpux.c: Added new version of audio_hpux.[ch]
from Hendrik (J.C.Harrison@ncl.ac.uk).
Fri Nov 4 15:47:00 1994 Mark Boyns <boyns@sdsu.edu>
* Added audio_sgi.[ch] to the rplayd/audio directory.
These files contain the new SGI audio support written
by kooper@dcs.qmw.ac.uk (Rob Kooper). Rob's patches
also included bug fixes for the .wav and .aiff parsing.
* Removed the [-PNnv] entries from the help messages for
the connection, pause and stop RPTP commands. Those options
are ignored by rplayd. Suggested by Germano Caronni <caronni@tik.ethz.ch>
Sun Oct 30 21:55:32 1994 Mark Boyns <boyns@sdsu.edu>
* configure.in: Updated to use autoconf 2.0 features.
Wed Oct 12 23:28:56 1994 Mark Boyns <boyns@sdsu.edu>
* rplayd/audio/audio_solaris.c (rplay_audio_init): Added check for dbri device
on Solaris 2.x systems.
Tue Oct 11 10:14:26 1994 Mark Boyns <boyns@sdsu.edu>
* include/config.h.in: Changed OLD_RPLAY_PORTS to
OTHER_RPLAY_PORTS since `OTHER' makes more sense.
Sun Oct 9 00:22:33 1994 Mark Boyns <boyns@sdsu.edu>
* rplayd/rplayd.c (main): Audio click detection/prevention.
* Added RPLAY_RESET packet and RPTP reset command which
tell the server to reset itself. Support has been added to
librplay, rplay, rptp, and rplayd. Suggested by Raphael Quinet.
* librplay/rplay.c (rplay_open_port): Create an RPLAY/UDP
socket with a specific port.
(rplay_open): Use rplay_open_port with the port in /etc/services
or RPLAY_PORT.
* rplayd/rplayd.c (usage): Added --rplay-port (--port),
--rptp-port, --other-rplay-port, and --other-rptp-port
options to rplayd.
Sat Oct 8 23:57:14 1994 Mark Boyns <boyns@sdsu.edu>
* rplayd/native.c: Created native.c and native.h which
implement a new audio processing scheme.
(fake_volume): Fake volume support is now handled by this
routine.
Sat Sep 24 10:24:29 1994 Mark Boyns <boyns@sdsu.edu>
* rplayd/spool.c: A critical section now blocks the timer
to hopefully prevent a race condition.
* rplayd/timer.c: Added timer_block () and timer_unblock ()
which block and unblock SIGALRM.
Sun Sep 18 22:46:25 1994 Mark Boyns <boyns@sdsu.edu>
* Makefiles now allow CFLAGS to be changed on the
`make' command line. (i.e. `make CFLAGS="-O2 -g"')
* rplayd/spool.c: Changed the spool from an array to
an linked list.
* Fixed all known memory leaks except for the leaks in
GNU GAS' hash.[ch].
* audio.c & rplayd.c: Added fake hardware volume support
which is enabled when `FAKE_VOLUME' is #defined.
Wed Aug 31 22:39:21 1994 Mark Boyns (boyns@mojo.sdsu.edu)
* Changed all of rplayd's hash_ routines to xhash_.
This change makes it very simple to move from one hashing
library to another.
* rplayd now uses hash.[ch] from GAS, the GNU Assembler.
hash.[ch] are now included in the lib directory.
* rptp/rptp.c: Added --raw (-r) option to the rptp client.
This option forces the client to display all of the RPTP
data received from the server.
Sun Aug 28 00:48:07 1994 Mark Boyns (boyns@mojo.sdsu.edu)
* rplay/rplay.c (usage): Added GNU getopt support to
the RPLAY client.
* rptp/rptp.c (usage): Added GNU getopt support to the
RPTP client.
* Replaced support with the lib directory which now contains
a library that includes getopt, regex, strdup, etc.
Wed Aug 24 09:38:59 1994 Mark Boyns (boyns@hercules.sdsu.edu)
* rplayd/audio/audio_hpux.c: Added audio_hpux module provided
by J.C.Harrison@newcastle.ac.uk. This code was developed on
a HP9000/710.
Tue Aug 23 20:36:37 1994 Mark Boyns (boyns@mojo.sdsu.edu)
* rplayd/rplayd.c (usage): Replaced the --sound-cache-size option
with --memory-cache-size and --memory-cache-sound-size.
Thu Aug 18 15:55:47 1994 Mark Boyns (boyns@hercules.sdsu.edu)
* librplay/rplay.c (rplay_unpack): changed ntohs to ntohl
for the unpacking of the sample rate.
* Finally got console access to a Linux system!
Wed Aug 17 10:36:36 1994 Mark Boyns (boyns@hercules.sdsu.edu)
* Fixed lots of autoconf files/parameters to fix problems with
Solaris and possibly other systems.
* rplayd/server.c (server_read): unknown hosts in rplay.servers
no longer cause rplayd to exit.
Tue Aug 9 17:14:44 1994 Mark Boyns (boyns@hercules.sdsu.edu)
* Version 3.2.0 alpha4 released.
Mon Aug 8 23:39:55 1994 Mark Boyns (boyns@mojo.sdsu.edu)
* rplayd/rplayd.c (usage): Added the --sound-cache-size option
to rplayd. The default value is RPLAY_SOUND_CACHE_SIZE.
* include/config.h.in: Added RPLAY_SOUND_CACHE_SIZE configuration
option.
* rplayd: Finished implementing sound caching scheme.
Sounds <= sound_max_cache_size are cached in memory using
mmap or malloc. All of the sound io routines have been changed
to use SINDEX (sound index). A SINDEX can be used to reference
a cached or a non-cached sound.
* Added HAVE_MMAP check.
Sat Aug 6 10:32:20 1994 Mark Boyns (boyns@mojo.sdsu.edu)
* rplayd/rplayd.c: Changed the default buffer-scheme
from "load" to "none".
* Added checks for HAVE_CONFIG_H, HAVE_STRING_H, and
HAVE_MEMORY_H.
* rplayd/cache.c (cache_create): changed "return NULL"
to "return -1". (oops)
Tue Jul 12 16:12:44 1994 Mark Boyns (boyns@hercules.sdsu.edu)
* Added FreeBSD patches from Brian Childs (brian@claremont.com).
Thanks Brian!
Fri Jun 24 22:58:25 1994 Mark Boyns (boyns@mojo.sdsu.edu)
* Version 3.2.0 alpha3 released.
Wed Jun 22 20:45:39 1994 Mark Boyns (boyns@mojo.sdsu.edu)
* Added HP patches that Richard Lloyd sent me about
a month ago. Thanks.
Tue Jun 21 23:32:28 1994 Mark Boyns (boyns@mojo.sdsu.edu)
* rplayd/rplayd.c (rplayd_write): Fixed problems with
new audio buffer code. BTW, the new code will make fast-
forwarding and rewinding possible someday.
Sun Jun 19 21:25:52 1994 Mark Boyns (boyns@mojo.sdsu.edu)
* rplayd/rplayd.c (rplayd_write): Re-wrote audio buffer
management routines.
Wed Jun 15 14:09:15 1994 Mark Boyns (boyns@hercules.sdsu.edu)
* rplayd: added optional_format to all the system audio stubs.
* rplayd: added --audio-format, --buffer-scheme,
and --help options.
Tue Jun 14 23:23:39 1994 Mark Boyns (boyns@mojo.sdsu.edu)
* doc/man1/rplayd.1: updated the man page with all of
the new long-named options.
* rplayd: added --auth and --no-auth options which
enable and disable host access authentication when
rplayd is compiled with AUTH defined.
* rplayd: use GNU getopt to parse rplayd's options.
All previous options now have long-named options.
getopt.[ch] and getopt1.c have been added to the rplayd
directory.
Tue Jun 14 08:39:03 1994 Mark Boyns (boyns@hercules.sdsu.edu)
* rplayd/audio/audio_linux.c (rplay_audio_flush):
use rplay_audio_fd instead of audio_fd.
Mon Jun 13 22:37:33 1994 Mark Boyns (boyns@mojo.sdsu.edu)
* rplayd/misc.c: Added the sys_err_str routine which is used to obtain
system error messages. This routine replaces the need for using
sys_errlist all over the place. All occurrances of sys_errlist have
been replaced with a call to sys_err_str. This routine tries to
use strerror if autoconf can find it. Otherwise, sys_errlist[errno]
is used.
* rplayd/host.c: rplayd doesn't exit anymore when a hostname cannot be
resolved. The invalid rplay.hosts entry is ingored.
Sun Jun 12 21:39:33 1994 Mark Boyns (boyns@mojo.sdsu.edu)
* Added rplay_audio_flush_timeout to rplayd. The timeout value is used to
determine when the audio device should flushed. Valid values are:
n > 0 : flush after n idle seconds
n == 0 : never flush
n == -1 : flush when the spool is empty (this is the default)
n == -2 : flush after each audio write
rplayd has a new -F option which used to specify the flush timeout value.
* Added RPLAY_AUDIO_FLUSH_TIMEOUT to all the rplayd/audio/audio_*.h files
with a default value of -1.
* Use AC_HAVE_FUNCS instead of AC_REPLACE_FUNCS in configure.in.
* Created the rplay mailing list - rplay@sdsu.edu. This is a Majordomo list
so send a message that contains "subscribe your_username@your.hostname"
to rplay-request@sdsu.edu to be added to the list. (the subject of the
message will be ignored) See README for more details.
* Renamed the CHANGES file to ChangeLog.
* Started using Emacs' add-change-log-entry to document changes.
Previous ChangeLog entries in the old CHANGES format:
* Version 3.2.0 alpha2 released.
* New version of XVolume that has pause, continue, and stop buttons.
Thanks Andrew.
* Added references to XSession and XMailbox++ to the README file.
* rplayd timeout works again.
* Fixed bug in rplayd/timer.c - sa_flags was never initialized. oops :)
Thanks Rob Mallory.
* Added automatic detection of changes made to the rplay.conf, rplay.servers,
and rplay.hosts files. Changed files are only automatically re-read when
rplayd is ready to do so. SIGHUP still forces rplayd to re-read all files.
* Fixed audio_sun.c so it will compile on pre-SunOS 4.1.3 systems.
* Added tkrplay to the contrib directory. This is my first Tcl/Tk program. :)
* Sound lists no longer have one second delays between sounds.
* Changed the default log level to 0 - no logging.
* Added support for a few new features of GNU autoconf 1.8 and higher.
* I'm going to phase out the use of ports 55555 and 55556 since they don't
work on HP's. The new ports will be 5555 and 5556 respectively. rplayd
has been modified to support both pairs of RPLAY/RPTP ports. This support
is enabled with the OLD_RPLAY_PORTS #define in config.h.
* Added the wait RPTP command which can be used to have clients block until
the desired event has occurred. For example:
wait play petergun.au - client will block until petergun is done playing
wait volume - client will block until the volume has changed
wait #34 - client will block until spool id #34 is done playing
wait can prefix any RPTP command but it is only effective with the play and
volume commands. Generic wait events may be added later.
* Added RPTP wait support to xvolume. Now the xvolume slider is automagically
updated when any client changes the volume with the RPTP volume command.
* Added RPTP wait support to the rptp client.
* Added RPTP status command which is used to obtain RPTP server statistics.
* Added RPTP status support to the rptp client.
* Added RPTP application command which is used to notify rplayd what
application is talking to it. Now "list connections" can display things
like this:
list connections
+connections
HOST TYPE IDLE APPLICATION WHAT
130.191.225.64 client 1 rptp (idle)
127.0.0.1 client .47 XVolume 1.3 wait volume
127.0.0.1 client 2 wait volume
.
The idea of using a command like application was suggested by Raphael Quinet
a long time ago.
I recommend that all RPTP applications use the application command to
tell rplay who they are. Older rplayds will not understand this command
so applications can ignore any '-' error received.
* Added RPTP application support to the rptp client and XVolume.
* Created the support directory which contains library routines that configure
couldn't find. Now rplay.h doesn't have a prototype for strdup since
rplay sources include support.h now.
* Fixed a memory leak in the re-reading of rplay.conf.
* Added linux patches from Mark Skouson (skouson@gecko.ee.byu.edu).
The patches include fixes for audio flushing.
* Created the patches directory and put HP patches and Linux audio module
that contains GUS support.
* rplayd used to read sounds in one second chunks. The second that was read
was one second of data according to the sample rate of the file, not the
sample rate that rplayd was writing. Now rplayd reads curr_bufsize * curr_rate
bytes at a time. This helps a lot.
--------------------------------------------------------------------------------
rplay 3.2.0alpha major improvements and changes from rplay 3.1.1beta
(there never was a non-beta release of 3.1.1)
* GNU Autoconf is now used to configure rplay.
* Added tvtwm, twm, and ctwm patches to the contrib directory.
Thanks J.E. Sacco (jsacco@ssl.com).
* rplayd can now be reset by sending it a SIGHUP. When the signal is received,
all playing sounds are stopped, connections are closed, and the sounds, hosts
and servers files are reread.
* Added XJukebox 0.9 to the contrib directory.
* Added a new version of XVolume to the contrib directory.
* Added mailnoise to the contrib directory.
* RPTP volume now supports +value and -value.
* Added info and load RPTP commands.
* Support for 8-bit and 16-bit audio input and output.
* Support for Sun's speaker box.
* Support for all sample rates.
* Added -R <sample rate> option to rplay. This is LOTS of fun!
* Support for .aiff and lots of .au files.
* rplay now accepts relative pathnames. Thanks Raphael.
* rplay can now do things like this: rplay -n3 -v30 bogus -n2 -v200 excellent
* The rptp client now accepts RPTP commands on the command line.
Example: rptp -h sounds.sdsu.edu list sounds
This feature makes the contrib/volume program unnecessary since the same
thing can be accomplished with "rptp volume <value>".
* Fixed a serious bug for systems that have an IP address of 127.0.0.1.
* Added the FvwmSound module to the contrib directory.
* Re-designed rplayd's audio writing scheme. This has no user-visible changes
but it was a lot of work. The -r and -b options are still valid.
* Added byte info to the "list connections" RPTP command. It now looks like
this:
HOST TYPE IDLE WHAT
127.0.0.1 client (idle)
130.191.224.8 server get 2lust.au (2017372/2195456)
* Added the version RPTP command.
* Support for .wav files.
* Support for stereo input and output.
* Removed the remote-install Makefile target.
* Fixed problems with previous rplay command line options and added the
following:
rplay -s, rplay -p, and rplay -c will stop, pause, and continue ALL sounds
when no sounds are specified. This is easier than having to type
rplay -s #0.
* Added the -N option to rplayd. This disables audio and is only useful
for RPTP servers without an audio device. rplayd will also disable audio
if it cannot open the audio device when it starts.
* Fixed the audio close timeout code.
* Removed the load RPTP command.
* The RPTP volume command now supports +<value> and -<value> which are used
as volume offsets.
* Re-designed rplayd's audio reading & writing scheme. Now audio files are
read piece by piece. Normally only one second of audio data is used at a
time so rplayd does not have to use lots of memory when playing large audio
files. As a result, all the mmap code has been removed from rplayd.
* Added fingergoodies to the contrib directory. Thanks Raphael.
* Fixed rplayd's idle mode.
* Disabled the sound_cleanup_timeout in rplayd since it's not necessary anymore.
* Fixed serious bug in spool_init/spool_clear.
--------------------------------------------------------------------------------
rplay 3.1.1beta major improvements and changes from rplay 3.1.1 (BETA):
* Added the RPTP volume command. (Only works on Suns so far)
* Added XVolume to the contrib directory. Thanks for all the Xlib code Andrew.
* Added volume to the contrib directory.
* Added the remote-install Makefile target.
* Added the samples and site directory to simplify installation.
* Added the -A option to rplayd which specifies an alternate audio device.
* Added more checks for interrupted systems calls in rplayd.
* Added RPLAY packet forwarding to rplayd. When the -f <host> option is used,
all RPLAY packets will be forwarded to <host>. Note that RPTP traffic is not
forwarded.
* Added support for hosts with multiple IP addresses.
* Now localhost (127.0.0.1) is automatically added to the host access list if
the local host's address is found.
* rplayd now has a better "idle mode".
* Changed the range of spool ids from 1..SPOOL_SIZE to 1..999.
* Changed the RPTP play protocol to return the spool id. For example:
play bogus.au
when successful will return:
+218
where 218 is the spool id associated with the sound. Thanks for the
suggestion Raphael.
* Added some xpilot sound configuration files to the contrib/xpilot directory.
* Added XJukebox 0.8 to the contrib directory. This program is still under
development so there might still be a few bugs. Thanks Raphael.
* Added olvwm rplay 3 patches to the contrib directory.
Thanks Joseph E. Sacco <jsacco@ssl.com>.
* Released 11/4/93.
--------------------------------------------------------------------------------
rplay 3.1.1 (BETA) major improvements and changes from rplay 3.1.0:
* Added audio timer code. Now audio data is written at a configurable rate
to the audio device. The default audio write rate is 20 times per second.
The size of the audio data written is also configurable, with the default
size being the sample rate of the audio device divided by the audio write
rate. For Sun's, which have a sample rate of 8000, 400 bytes of audio
data is written to the audio device 20 times per second.
The end result of all this is that sounds are now played/paused/continued/
stopped immediately, when before there were delays.
* Added the -r option to rplayd to control the audio write rate.
* Added the -b option to rplayd to control the size of the audio buffer size.
* Changed rplayd to accept RPLAY_COUNT and RPLAY_LIST_COUNT with values of zero.
Now when the values are zero the sound or sound list will be repeated forever.
* Removed the use of usleep().
* Added the RPLAY_RPTP_SEARCH attribute which specifies whether or not rplayd
should search for the given sound.
* Added the RPLAY_RPTP_SERVER and RPLAY_RPTP_PORT attributes which specify
the RPTP server to use if the given sound is not found. This server
overrides the default servers listed in the rplay.servers file.
* Added Raphael's jukebox 1.3 to the contrib directory.
* Added the RPLAY_RPTP_FROM_SENDER attribute which tells rplayd to try and
obtain sounds from the sender when they are not found locally.
* Added "COUNT" to the "list spool" output.
* Added rplayd logging facilities which were inspired by Raphael Quinet's
logging patches. Default logging parameters are specified in include/conf.h
and can be specified using -l and -L rplayd options.
* Implemented spool ids. Each spool entry is assigned a unique spool id when
it is inserted in the spool. Valid spool ids range from 1 to the maximum
spool size (defined in include/conf.h). Spool id 0 can be used to reference
all sounds in the spool. Now all sounds can be stopped using:
rplay -s #0
or
rptp> stop #0
Specific spool entries can be stopped/paused/continued using the following:
rplay -p #1 #5 #6 /* pause spool entries #1 #5 & #6 */
rplay -c #1 /* continue spool entry #1 */
Note that the spool id extension assumes that no sounds begin with the '#'
character.
The "list spool" output now looks like:
SID HOST STATE VOL PRI COUNT SECONDS REMAIN SOUND
1 127.0.0.1 play 10 0 0 6 2 spacemusic.au
* Made spool matching less specific. Now only sound names are compared where
before all the attributes were compared. When a sound is played with:
rplay -v200 -P255 petergun
it can be stopped using only:
rplay -s petergun
* All spool entries are now checked for a match. For example, if there are 10
spool entries playing "petergun", all of them can be stopped using a single
"rplay -s petergun".
--------------------------------------------------------------------------------
rplay 3.1.0 major improvements and changes from rplay 3.1 (BETA3):
* Added SGI Indigo patches from Mike.Hoffmann@mch.sni.de.
* Added a newer version of Raphael's jukebox 1.2 which includes a man page.
* Added patches from Raphael to support DEC 3100's running Ultrix 4.2,
with cc or gcc-2.4.5.
These patches do not include audio support, however, a DEC can be used as
a sound server.
* Added more idle information to the "list connections" display.
* Released 9/1/93.
--------------------------------------------------------------------------------
rplay 3.1 (BETA3) major improvements and changes from rplay 3.1 (BETA2):
* RPTP commands "play", "pause", "continue", and "stop" now accept the following
options (similar to the rplay client):
-P <int> Sound priority.
-N <int> Number of times to play the sound list.
-n <int> Number of times to play each sound.
-v <int> Volume.
* Fixed bug which caused sounds to get stuck in the spool when the first RPTP
server was unavailable. (mgyger@itr.ch)
* Fixed bug which caused sounds to get stuck in the spool when the TCP
connection was lost during a sound transfer. (quinet@montefiore.ulg.ac.be)
* The volume of low priority sounds is lowered when higher priority sounds
are in the sound spool. Each sound's volume is lowered depending on it's
priority relative to the highest priority.
* sound_delete now deletes sound files.
* Sounds that are transferred by rplayd are stored in the cache using the name
that the remote rplayd sends. (quinet@montefiore.ulg.ac.be)
* Sound cleanup will no longer cleanup sounds that have events associated
with them. It took a long time to find this one! Thanks for your slow
network connection Raphael.
* Added SOUND_CLEANUP_TIMEOUT to include/conf.h so the cleanup timeout can be
configured.
* Added a newer version of mailsound to the contrib directory. The new version
has a lot of new options. Thanks Andrew.
* Changed PORTABLE_LONG macro to use (unsigned char *). (mrh@io.nosc.mil)
* Added more Solaris 2.x suggestions from Kjetil Wiekhorst J{\o}rgensen
<jorgens@pvv.unit.no>.
* Added 386bsd patches to audio.c from Mike Halderman (mrh@io.nosc.mil).
The 386bsd patches require the soundblaster driver version 1.5 written by
Steve Haehnichen (shaehnic@ucsd.edu).
--------------------------------------------------------------------------------
rplay 3.1 (BETA2) major improvements and changes from rplay 3.1 (BETA):
* Fixed bug in rplayd's "put" implementation. (quinet@montefiore.ulg.ac.be)
* Fixed segmentation violation when rplayd had no rplay.servers.
(quinet@montefiore.ulg.ac.be)
* The rptp client now handles IP addresses correctly and deals with
connections being closed and timed out much better.
* Corrected many mistakes in the documentation.
(quinet@montefiore.ulg.ac.be) (mgyger@itr.ch)
* Added '!' (RPTP_TIMEOUT) as an RPTP response type.
* Added RPTP_ERROR_TIMEOUT to the possible rptp_errno values.
* Fixed server timeout handling in rplayd.
* Fixed a nasty bug in rptp_getline.
* Added the use of the RPLAY_HOST environment variable. The host defined by
RPLAY_HOST specifies a default rplay host. When RPLAY_HOST is not defined
localhost will be used. The new rplay library routine
char *rplay_default_host(void) can be used to obtain the default rplay host.
* Changed the -h option in the rplay client. -h is now used to specify an
rplay host. Now a hostname does not have to be specified. For example:
"rplay bogus.au" uses RPLAY_HOST or localhost.
"rplay -h bozo bogus.au" uses bozo.
* Changed the -h option in the rptp client. -h is now used to specify an
rptp host. Now a hostname does not have to be specified. For example:
"rptp" uses RPLAY_HOST or localhost port 55556.
"rptp -h bozo" uses bozo port 55556.
* Removed the -h option from rplayd to be consistent with the other programs.
-h will still display the usage information in all the programs since
either an option is required or the option is not valid.
* Added int rplay_default(char *sound) to the rplay library.
* Cleaned up rplayd's memory usage. Sounds are now unmapped when the audio
device is closed.
* Fixed a bug in rplayd's event handling routines. Now sounds that are
being transferred don't get stuck in the spool.
* Comments were moved in Makefile.config to avoid bugs in some versions of
make. (sinster@scintilla.santa-clara.ca.us)
* The mail command used by "make mail" is now defined in Makefile.conf.
* Added more fixes for HP-UX. (mgyger@itr.ch)
* Added int rplay_open_default(void) to the rplay library.
* Added jukebox version 1.2 to the contrib directory. Thanks again Raphael.
--------------------------------------------------------------------------------
rplay 3.1 (BETA) major improvements and changes from rplay 3.0 PL2:
(This release has many changes so I probably have forgotten some of them.)
* Completely re-organized the rplay source tree.
* Designed and implemented RPTP. This includes writing the RPTP client and
adding RPTP support to rplayd. Please read doc/README.RPTP if you want
to learn more about RPTP.
* Added the following routines to librplay:
int rplay_host_volume(char *host, char *sound, int volume)
int rplay_open_sockaddr_in(struct sockaddr_in *saddr)
int rplay_ping(char *host)
int rplay_ping_sockfd(int rplay_fd)
int rplay_ping_sockaddr_in(struct sockaddr_in *saddr)
int rptp_open(char *host, int port, char *response, int response_size)
int rptp_read(int rptp_fd, char *ptr, int nbytes)
int rptp_write(int rptp_fd, char *ptr, int nbytes)
int rptp_putline(int rptp_fd, char *fmt, ...)
int rptp_getline(int rptp_fd, char *buf, int nbytes)
int rptp_command(int rptp_fd, char *command, char *response,int response_size)
int rptp_close(int rptp_fd)
void rptp_perror(char *message)
* Added the RPLAY_PING attribute to the RPLAY protocol. This attribute is used
by RPTP to wakeup rplayd since inetd can't invoke one program using two ports.
* Now using the GNU General Public License Version 2.
* Add the rplay.servers file which lists the rplay servers that rplayd should
contact to obtain sound files.
* Implemented the sound cache where rplayd will store sound files it obtains.
* Changed the format of the rplay.hosts file to accept wildcards and access
permissions.
* Fixed a bug that caused some rplay packets to incorrectly have permission
denied.
* Changed rplayd to accept sounds which are not in the rplay.conf and are
available locally. For example, is /tmp/foo.au is not in the rplay.conf
it can still be played using 'rplay hostname /tmp/foo.au".
* Changed include/conf.h to '#define AUTH' by default.
* Switched to Darren Senn's hsearch implementation.
* Included Darren Senn's PORTABLE_LONG macro which is useful when examining
ulaw file headers on multiple architectures.
* Wrote some manual pages which are in the doc directory.
* Updated doc/README.LIBRPLAY to included the new RPTP extensions.
* Added a NEW version of mailsound to the contrib directory. The new version
has a lot of new options. Thanks Andrew.
* Added crossfire to the contrib directory.
* Added HP-UX patches from rkl@csc.liv.ac.uk (Richard Lloyd) and
Markus Gyger <mgyger@itr.ch>.
* Conversion tables are now used for both ulaw->linear and linear->ulaw.
The tables were contributed by Markus Gyger <mgyger@itr.ch>.
* Headerless ulaw files can still be played if their filename extension is
either .au, .u, or .ul as suggested by Markus Gyger <mgyger@itr.ch>.
* Added Solaris 2.x patches from Kjetil Wiekhorst J{\o}rgensen
<jorgens@pvv.unit.no>.
--------------------------------------------------------------------------------
rplay 3.0 PL2 major improvements and changes from rplay 3.0 PL1:
* Use strchr and strrchr instead of index and rindex.
* Added -r (random pick) option to the rplay client.
* Added RPLAY_RANDOM_SOUND attribute which will pick a sound randomly from
a sound list. See README.LIBRPLAY for an example.
* Added jukebox to the contrib directory. See contrib/jukebox1.1/README for
more details. (Thanks quinet@montefiore.ulg.ac.be)
* Changed rplayd to handle filenames with spaces correctly.
* Fixed librplay.c and rplayd.c prototypes to support non ANSI C compilers.
(Thanks infmx!cheetah!dranney@uunet.UU.NET)
* Added the following to the rplay library to make playing sounds even easier:
(See README.LIBRPLAY for more information)
int rplay_open_display(void);
int rplay_display(char *sound);
int rplay_local(char *sound);
int rplay_host(char *host, char *sound);
int rplay_sound(int rplay_fd, char *sound);
--------------------------------------------------------------------------------
rplay 3.0 PL1 major improvements and changes from rplay 3.0:
* Changed conf.h to '#undef AUTH' (host authentication).
* Changed rplay_set to strdup() sound filenames.
* Added -n (count), -N (list count), and -P (priority) options to the rplay
client.
* Added RPLAY_PRIORITY attribute. Priorities range from 0 to 255 (0 being
the lowest priority). Sounds with higher priorities will replace lower
priority sounds when the sound spool is full.
* Sounds can be referenced using complete pathnames. This helps to avoid
problems when different sound files have the same name.
* Sound filename extensions are now optional. If extensions are used they
are enforced.
* Added RPLAY_LIST_COUNT attribute. The sound list will be played count
number of times.
* Added RPLAY_COUNT attribute. Each sound in a sound list will be played
count number of times.
* Fixed select's usage of timeval struct. (sinster@scintilla.santa-clara.ca.us)
* Cleaned up the code a little. Added better ANSI C support and put in
a little more documentation.
* Fixed some spelling mistakes.
* Removed -V option from the rplay client.
--------------------------------------------------------------------------------
rplay 3.0 major improvements and changes from rplay 2.0:
* rplayd is no longer based on Sun's lwp library. This will make rplay
portable to machines other than SPARCstations. Hopefully soon rplay will
work with BSDI, Linux, and maybe 386bsd. Only 8 bit ulaw audio files are
currently supported.
* The rplay library has been rewritten and is now much more flexible for rplay
additions. This new library is not compatible with the rplay2.0 library,
what I mean is that old rplay programs will not compile.
See WARNING and README.LIBRPLAY for conversion help.
* A more flexible rplay protocol is used. The rplay2.0 protocol can still
be supported. See conf.h.
* Host authentication can be used to allow only certain machines access to
play sounds. See conf.h and INSTALL.
* Compile time option to use mmap or malloc and read to load sound files.
See conf.h.
* inetd support can be disabled with a command line option
* rplayd timeouts can be changed or disabled with command line options
* rplayd has many other options, run rplay -h to see them.
* rplayd speed enhancements
--------------------------------------------------------------------------------
rplay 2.0 major improvements and changes from rplay 1.2:
* Sounds are no longer indexed by id, the sound names are now used.
* Sounds can be played, paused, continued, and stopped.
* Each sound can have a volume associated with it. A volume is
a number between 0 and 255 and it is relative to the actual volume
of the audio device.
* Sequences of sounds are supported. This is useful for playing
sentences or sounds that need to be played sequentially.
* mmap is now used to read sounds. This increases performance
and saves a lot of memory. Thanks to stripes@pix.com for this
suggestion.
* Broadcasting sounds. To use this just use a broadcast address
instead of a hostname. For example, I use:
rplay 130.191.255.255 burp.au
to play burp.au on all our machines running rplayd on our subnet.
* The Sun audio stuff is no longer used. Thanks to libst.c and
libst.h from Sound Tools. See these files for more information.
* Released 11/12/92.
--------------------------------------------------------------------------------
* rplay 1.2 released 7/20/92
* rplay 1.1 released 7/13/92
* Original rplay released sometime in May or June of 92, I have forgotten.