dnl aclocal.m4 generated automatically by aclocal 1.4-p6
dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
dnl PARTICULAR PURPOSE.
# Configure paths for SDL
# Sam Lantinga 9/21/99
# stolen from Manish Singh
# stolen back from Frank Belew
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor
dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
dnl
AC_DEFUN(AM_PATH_SDL,
[dnl
dnl Get the cflags and libraries from the sdl-config script
dnl
AC_ARG_WITH(sdl-prefix,[ --with-sdl-prefix=PFX Prefix where SDL is installed (optional)],
sdl_prefix="$withval", sdl_prefix="")
AC_ARG_WITH(sdl-exec-prefix,[ --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
sdl_exec_prefix="$withval", sdl_exec_prefix="")
AC_ARG_ENABLE(sdltest, [ --disable-sdltest Do not try to compile and run a test SDL program],
, enable_sdltest=yes)
if test x$sdl_exec_prefix != x ; then
sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
if test x${SDL_CONFIG+set} != xset ; then
SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
fi
fi
if test x$sdl_prefix != x ; then
sdl_args="$sdl_args --prefix=$sdl_prefix"
if test x${SDL_CONFIG+set} != xset ; then
SDL_CONFIG=$sdl_prefix/bin/sdl-config
fi
fi
AC_PATH_PROG(SDL_CONFIG, sdl-config, no)
min_sdl_version=ifelse([$1], ,0.11.0,$1)
AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
no_sdl=""
if test "$SDL_CONFIG" = "no" ; then
no_sdl=yes
else
SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`
sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_sdltest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $SDL_CFLAGS"
LIBS="$LIBS $SDL_LIBS"
dnl
dnl Now check if the installed SDL is sufficiently new. (Also sanity
dnl checks the results of sdl-config to some extent
dnl
rm -f conf.sdltest
AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "SDL.h"
char*
my_strdup (char *str)
{
char *new_str;
if (str)
{
new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
strcpy (new_str, str);
}
else
new_str = NULL;
return new_str;
}
int main (int argc, char *argv[])
{
int major, minor, micro;
char *tmp_version;
/* This hangs on some systems (?)
system ("touch conf.sdltest");
*/
{ FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = my_strdup("$min_sdl_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
printf("%s, bad version string\n", "$min_sdl_version");
exit(1);
}
if (($sdl_major_version > major) ||
(($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
(($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
printf("*** best to upgrade to the required version.\n");
printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
printf("*** to point to the correct copy of sdl-config, and remove the file\n");
printf("*** config.cache before re-running configure\n");
return 1;
}
}
],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_sdl" = x ; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$SDL_CONFIG" = "no" ; then
echo "*** The sdl-config script installed by SDL could not be found"
echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the SDL_CONFIG environment variable to the"
echo "*** full path to sdl-config."
else
if test -f conf.sdltest ; then
:
else
echo "*** Could not run SDL test program, checking why..."
CFLAGS="$CFLAGS $SDL_CFLAGS"
LIBS="$LIBS $SDL_LIBS"
AC_TRY_LINK([
#include <stdio.h>
#include "SDL.h"
], [ return 0; ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding SDL or finding the wrong"
echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means SDL was incorrectly installed"
echo "*** or that you have moved SDL since it was installed. In the latter case, you"
echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
SDL_CFLAGS=""
SDL_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(SDL_CFLAGS)
AC_SUBST(SDL_LIBS)
rm -f conf.sdltest
])
# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Save cache, so that ltconfig can load it
AC_CACHE_SAVE
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])
AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
case "$target" in
NONE) lt_target="$host" ;;
*) lt_target="$target" ;;
esac
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
[ --disable-libtool-lock avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw*)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
])
esac
])
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_SHARED, [dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_STATIC, [dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])
AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi])
])
# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
break
else
ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
])
# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case "$lt_target" in
*-*-beos* | *-*-cygwin*)
# These system don't have libm
;;
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
*)
AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library and INCLTDL to the include flags for
# the libltdl header and adds --enable-ltdl-convenience to the
# configure arguments. Note that LIBLTDL and INCLTDL are not
# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
# with '${top_builddir}/' and INCLTDL will be prefixed with
# '${top_srcdir}/' (note the single quotes!). If your package is not
# flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library and INCLTDL to the include flags for
# the libltdl header and adds --enable-ltdl-install to the configure
# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
# with '${top_srcdir}/' (note the single quotes!). If your package is
# not flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_CHECK_LIB(ltdl, main,
[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
[if test x"$enable_ltdl_install" = xno; then
AC_MSG_WARN([libltdl not installed, but installation disabled])
else
enable_ltdl_install=yes
fi
])
if test x"$enable_ltdl_install" = x"yes"; then
ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
else
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
LIBLTDL="-lltdl"
INCLTDL=
fi
])
dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl
AC_DEFUN(AC_TYPE_SOCKLEN_T,
[AC_CACHE_CHECK([for socklen_t], ac_cv_type_socklen_t,
[
AC_TRY_COMPILE(
[#include <sys/socket.h>],
[socklen_t len = 42; return len;],
ac_cv_type_socklen_t=yes,
ac_cv_type_socklen_t=no)
])
if test $ac_cv_type_socklen_t != yes; then
AC_DEFINE(socklen_t, int)
fi
])
# lib-prefix.m4 serial 3 (gettext-0.12.2)
dnl Copyright (C) 2001-2003 Free Software Foundation, Inc.
dnl This file is free software, distributed under the terms of the GNU
dnl General Public License. As a special exception to the GNU General
dnl Public License, this file may be distributed as part of a program
dnl that contains a configuration script generated by Autoconf, under
dnl the same distribution terms as the rest of that program.
dnl From Bruno Haible.
dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
dnl require excessive bracketing.
ifdef([AC_HELP_STRING],
[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
dnl to access previously installed libraries. The basic assumption is that
dnl a user will want packages to use other packages he previously installed
dnl with the same --prefix option.
dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
dnl libraries, but is otherwise very convenient.
AC_DEFUN([AC_LIB_PREFIX],
[
AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
AC_REQUIRE([AC_PROG_CC])
AC_REQUIRE([AC_CANONICAL_HOST])
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
dnl By default, look in $includedir and $libdir.
use_additional=yes
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
AC_LIB_ARG_WITH([lib-prefix],
[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
--without-lib-prefix don't search for libraries in includedir and libdir],
[
if test "X$withval" = "Xno"; then
use_additional=no
else
if test "X$withval" = "X"; then
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
else
additional_includedir="$withval/include"
additional_libdir="$withval/lib"
fi
fi
])
if test $use_additional = yes; then
dnl Potentially add $additional_includedir to $CPPFLAGS.
dnl But don't add it
dnl 1. if it's the standard /usr/include,
dnl 2. if it's already present in $CPPFLAGS,
dnl 3. if it's /usr/local/include and we are using GCC on Linux,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_includedir" != "X/usr/include"; then
haveit=
for x in $CPPFLAGS; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-I$additional_includedir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test "X$additional_includedir" = "X/usr/local/include"; then
if test -n "$GCC"; then
case $host_os in
linux*) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
if test -d "$additional_includedir"; then
dnl Really add $additional_includedir to $CPPFLAGS.
CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
fi
fi
fi
fi
dnl Potentially add $additional_libdir to $LDFLAGS.
dnl But don't add it
dnl 1. if it's the standard /usr/lib,
dnl 2. if it's already present in $LDFLAGS,
dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_libdir" != "X/usr/lib"; then
haveit=
for x in $LDFLAGS; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$additional_libdir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test "X$additional_libdir" = "X/usr/local/lib"; then
if test -n "$GCC"; then
case $host_os in
linux*) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
if test -d "$additional_libdir"; then
dnl Really add $additional_libdir to $LDFLAGS.
LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
fi
fi
fi
fi
fi
])
dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
dnl acl_final_exec_prefix, containing the values to which $prefix and
dnl $exec_prefix will expand at the end of the configure script.
AC_DEFUN([AC_LIB_PREPARE_PREFIX],
[
dnl Unfortunately, prefix and exec_prefix get only finally determined
dnl at the end of configure.
if test "X$prefix" = "XNONE"; then
acl_final_prefix="$ac_default_prefix"
else
acl_final_prefix="$prefix"
fi
if test "X$exec_prefix" = "XNONE"; then
acl_final_exec_prefix='${prefix}'
else
acl_final_exec_prefix="$exec_prefix"
fi
acl_save_prefix="$prefix"
prefix="$acl_final_prefix"
eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
prefix="$acl_save_prefix"
])
dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
dnl variables prefix and exec_prefix bound to the values they will have
dnl at the end of the configure script.
AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
[
acl_save_prefix="$prefix"
prefix="$acl_final_prefix"
acl_save_exec_prefix="$exec_prefix"
exec_prefix="$acl_final_exec_prefix"
$1
exec_prefix="$acl_save_exec_prefix"
prefix="$acl_save_prefix"
])
# lib-link.m4 serial 4 (gettext-0.12)
dnl Copyright (C) 2001-2003 Free Software Foundation, Inc.
dnl This file is free software, distributed under the terms of the GNU
dnl General Public License. As a special exception to the GNU General
dnl Public License, this file may be distributed as part of a program
dnl that contains a configuration script generated by Autoconf, under
dnl the same distribution terms as the rest of that program.
dnl From Bruno Haible.
dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
dnl the libraries corresponding to explicit and implicit dependencies.
dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
dnl augments the CPPFLAGS variable.
AC_DEFUN([AC_LIB_LINKFLAGS],
[
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
AC_REQUIRE([AC_LIB_RPATH])
define([Name],[translit([$1],[./-], [___])])
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
AC_LIB_LINKFLAGS_BODY([$1], [$2])
ac_cv_lib[]Name[]_libs="$LIB[]NAME"
ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
])
LIB[]NAME="$ac_cv_lib[]Name[]_libs"
LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
AC_SUBST([LIB]NAME)
AC_SUBST([LTLIB]NAME)
dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
dnl results of this search when this library appears as a dependency.
HAVE_LIB[]NAME=yes
undefine([Name])
undefine([NAME])
])
dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
dnl searches for libname and the libraries corresponding to explicit and
dnl implicit dependencies, together with the specified include files and
dnl the ability to compile and link the specified testcode. If found, it
dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
[
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
AC_REQUIRE([AC_LIB_RPATH])
define([Name],[translit([$1],[./-], [___])])
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
dnl accordingly.
AC_LIB_LINKFLAGS_BODY([$1], [$2])
dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
dnl because if the user has installed lib[]Name and not disabled its use
dnl via --without-lib[]Name-prefix, he wants to use it.
ac_save_CPPFLAGS="$CPPFLAGS"
AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LIB[]NAME"
AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
LIBS="$ac_save_LIBS"
])
if test "$ac_cv_lib[]Name" = yes; then
HAVE_LIB[]NAME=yes
AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
AC_MSG_CHECKING([how to link with lib[]$1])
AC_MSG_RESULT([$LIB[]NAME])
else
HAVE_LIB[]NAME=no
dnl If $LIB[]NAME didn't lead to a usable library, we don't need
dnl $INC[]NAME either.
CPPFLAGS="$ac_save_CPPFLAGS"
LIB[]NAME=
LTLIB[]NAME=
fi
AC_SUBST([HAVE_LIB]NAME)
AC_SUBST([LIB]NAME)
AC_SUBST([LTLIB]NAME)
undefine([Name])
undefine([NAME])
])
dnl Determine the platform dependent parameters needed to use rpath:
dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
dnl hardcode_direct, hardcode_minus_L.
AC_DEFUN([AC_LIB_RPATH],
[
AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
. ./conftest.sh
rm -f ./conftest.sh
acl_cv_rpath=done
])
wl="$acl_cv_wl"
libext="$acl_cv_libext"
shlibext="$acl_cv_shlibext"
hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
hardcode_direct="$acl_cv_hardcode_direct"
hardcode_minus_L="$acl_cv_hardcode_minus_L"
dnl Determine whether the user wants rpath handling at all.
AC_ARG_ENABLE(rpath,
[ --disable-rpath do not hardcode runtime library paths],
:, enable_rpath=yes)
])
dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
dnl the libraries corresponding to explicit and implicit dependencies.
dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
[
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
dnl By default, look in $includedir and $libdir.
use_additional=yes
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
AC_LIB_ARG_WITH([lib$1-prefix],
[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
--without-lib$1-prefix don't search for lib$1 in includedir and libdir],
[
if test "X$withval" = "Xno"; then
use_additional=no
else
if test "X$withval" = "X"; then
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
else
additional_includedir="$withval/include"
additional_libdir="$withval/lib"
fi
fi
])
dnl Search the library and its dependencies in $additional_libdir and
dnl $LDFLAGS. Using breadth-first-seach.
LIB[]NAME=
LTLIB[]NAME=
INC[]NAME=
rpathdirs=
ltrpathdirs=
names_already_handled=
names_next_round='$1 $2'
while test -n "$names_next_round"; do
names_this_round="$names_next_round"
names_next_round=
for name in $names_this_round; do
already_handled=
for n in $names_already_handled; do
if test "$n" = "$name"; then
already_handled=yes
break
fi
done
if test -z "$already_handled"; then
names_already_handled="$names_already_handled $name"
dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
dnl or AC_LIB_HAVE_LINKFLAGS call.
uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
eval value=\"\$HAVE_LIB$uppername\"
if test -n "$value"; then
if test "$value" = yes; then
eval value=\"\$LIB$uppername\"
test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
eval value=\"\$LTLIB$uppername\"
test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
else
dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
dnl that this library doesn't exist. So just drop it.
:
fi
else
dnl Search the library lib$name in $additional_libdir and $LDFLAGS
dnl and the already constructed $LIBNAME/$LTLIBNAME.
found_dir=
found_la=
found_so=
found_a=
if test $use_additional = yes; then
if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
else
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
fi
fi
fi
if test "X$found_dir" = "X"; then
for x in $LDFLAGS $LTLIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
else
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
fi
fi
;;
esac
if test "X$found_dir" != "X"; then
break
fi
done
fi
if test "X$found_dir" != "X"; then
dnl Found the library.
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
if test "X$found_so" != "X"; then
dnl Linking with a shared library. We attempt to hardcode its
dnl directory into the executable's runpath, unless it's the
dnl standard /usr/lib.
if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
dnl No hardcoding is needed.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
dnl Use an explicit option to hardcode DIR into the resulting
dnl binary.
dnl Potentially add DIR to ltrpathdirs.
dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
haveit=
for x in $ltrpathdirs; do
if test "X$x" = "X$found_dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
ltrpathdirs="$ltrpathdirs $found_dir"
fi
dnl The hardcoding into $LIBNAME is system dependent.
if test "$hardcode_direct" = yes; then
dnl Using DIR/libNAME.so during linking hardcodes DIR into the
dnl resulting binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
dnl Use an explicit option to hardcode DIR into the resulting
dnl binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
dnl Potentially add DIR to rpathdirs.
dnl The rpathdirs will be appended to $LIBNAME at the end.
haveit=
for x in $rpathdirs; do
if test "X$x" = "X$found_dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
rpathdirs="$rpathdirs $found_dir"
fi
else
dnl Rely on "-L$found_dir".
dnl But don't add it if it's already contained in the LDFLAGS
dnl or the already constructed $LIBNAME
haveit=
for x in $LDFLAGS $LIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$found_dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
fi
if test "$hardcode_minus_L" != no; then
dnl FIXME: Not sure whether we should use
dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
dnl here.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
dnl here, because this doesn't fit in flags passed to the
dnl compiler. So give up. No hardcoding. This affects only
dnl very old systems.
dnl FIXME: Not sure whether we should use
dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
dnl here.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
fi
fi
fi
fi
else
if test "X$found_a" != "X"; then
dnl Linking with a static library.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
else
dnl We shouldn't come here, but anyway it's good to have a
dnl fallback.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
fi
fi
dnl Assume the include files are nearby.
additional_includedir=
case "$found_dir" in
*/lib | */lib/)
basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
additional_includedir="$basedir/include"
;;
esac
if test "X$additional_includedir" != "X"; then
dnl Potentially add $additional_includedir to $INCNAME.
dnl But don't add it
dnl 1. if it's the standard /usr/include,
dnl 2. if it's /usr/local/include and we are using GCC on Linux,
dnl 3. if it's already present in $CPPFLAGS or the already
dnl constructed $INCNAME,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_includedir" != "X/usr/include"; then
haveit=
if test "X$additional_includedir" = "X/usr/local/include"; then
if test -n "$GCC"; then
case $host_os in
linux*) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
for x in $CPPFLAGS $INC[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-I$additional_includedir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test -d "$additional_includedir"; then
dnl Really add $additional_includedir to $INCNAME.
INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
fi
fi
fi
fi
fi
dnl Look for dependencies.
if test -n "$found_la"; then
dnl Read the .la file. It defines the variables
dnl dlname, library_names, old_library, dependency_libs, current,
dnl age, revision, installed, dlopen, dlpreopen, libdir.
save_libdir="$libdir"
case "$found_la" in
*/* | *\\*) . "$found_la" ;;
*) . "./$found_la" ;;
esac
libdir="$save_libdir"
dnl We use only dependency_libs.
for dep in $dependency_libs; do
case "$dep" in
-L*)
additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
dnl But don't add it
dnl 1. if it's the standard /usr/lib,
dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
dnl 3. if it's already present in $LDFLAGS or the already
dnl constructed $LIBNAME,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_libdir" != "X/usr/lib"; then
haveit=
if test "X$additional_libdir" = "X/usr/local/lib"; then
if test -n "$GCC"; then
case $host_os in
linux*) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
haveit=
for x in $LDFLAGS $LIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$additional_libdir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test -d "$additional_libdir"; then
dnl Really add $additional_libdir to $LIBNAME.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
fi
fi
haveit=
for x in $LDFLAGS $LTLIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$additional_libdir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test -d "$additional_libdir"; then
dnl Really add $additional_libdir to $LTLIBNAME.
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
fi
fi
fi
fi
;;
-R*)
dir=`echo "X$dep" | sed -e 's/^X-R//'`
if test "$enable_rpath" != no; then
dnl Potentially add DIR to rpathdirs.
dnl The rpathdirs will be appended to $LIBNAME at the end.
haveit=
for x in $rpathdirs; do
if test "X$x" = "X$dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
rpathdirs="$rpathdirs $dir"
fi
dnl Potentially add DIR to ltrpathdirs.
dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
haveit=
for x in $ltrpathdirs; do
if test "X$x" = "X$dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
ltrpathdirs="$ltrpathdirs $dir"
fi
fi
;;
-l*)
dnl Handle this in the next round.
names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
;;
*.la)
dnl Handle this in the next round. Throw away the .la's
dnl directory; it is already contained in a preceding -L
dnl option.
names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
;;
*)
dnl Most likely an immediate library name.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
;;
esac
done
fi
else
dnl Didn't find the library; assume it is in the system directories
dnl known to the linker and runtime loader. (All the system
dnl directories known to the linker should also be known to the
dnl runtime loader, otherwise the system is severely misconfigured.)
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
fi
fi
fi
done
done
if test "X$rpathdirs" != "X"; then
if test -n "$hardcode_libdir_separator"; then
dnl Weird platform: only the last -rpath option counts, the user must
dnl pass all path elements in one option. We can arrange that for a
dnl single library, but not when more than one $LIBNAMEs are used.
alldirs=
for found_dir in $rpathdirs; do
alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
done
dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
acl_save_libdir="$libdir"
libdir="$alldirs"
eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
else
dnl The -rpath options are cumulative.
for found_dir in $rpathdirs; do
acl_save_libdir="$libdir"
libdir="$found_dir"
eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
done
fi
fi
if test "X$ltrpathdirs" != "X"; then
dnl When using libtool, the option that works for both libraries and
dnl executables is -R. The -R options are cumulative.
for found_dir in $ltrpathdirs; do
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
done
fi
])
dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
dnl unless already present in VAR.
dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
dnl contains two or three consecutive elements that belong together.
AC_DEFUN([AC_LIB_APPENDTOVAR],
[
for element in [$2]; do
haveit=
for x in $[$1]; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X$element"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
[$1]="${[$1]}${[$1]:+ }$element"
fi
done
])
# lib-ld.m4 serial 2 (gettext-0.12)
dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
dnl This file is free software, distributed under the terms of the GNU
dnl General Public License. As a special exception to the GNU General
dnl Public License, this file may be distributed as part of a program
dnl that contains a configuration script generated by Autoconf, under
dnl the same distribution terms as the rest of that program.
dnl Subroutines of libtool.m4,
dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
dnl with libtool.m4.
dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
AC_DEFUN([AC_LIB_PROG_LD_GNU],
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
acl_cv_prog_gnu_ld=yes
else
acl_cv_prog_gnu_ld=no
fi])
with_gnu_ld=$acl_cv_prog_gnu_ld
])
dnl From libtool-1.4. Sets the variable LD.
AC_DEFUN([AC_LIB_PROG_LD],
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
# Prepare PATH_SEPARATOR.
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
echo "#! /bin/sh" >conf$$.sh
echo "exit 0" >>conf$$.sh
chmod +x conf$$.sh
if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
else
PATH_SEPARATOR=:
fi
rm -f conf$$.sh
fi
ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[[\\/]* | [A-Za-z]:[\\/]*)]
[re_direlt='/[^/][^/]*/\.\./']
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(acl_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
acl_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
acl_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$acl_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_LIB_PROG_LD_GNU
])
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
# serial 1
dnl Usage:
dnl AM_INIT_AUTOMAKE(package,version, [no-define])
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])
PACKAGE=[$1]
AC_SUBST(PACKAGE)
VERSION=[$2]
AC_SUBST(VERSION)
dnl test to see if srcdir already configured
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
ifelse([$3],,
AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
AC_REQUIRE([AM_SANITY_CHECK])
AC_REQUIRE([AC_ARG_PROGRAM])
dnl FIXME This is truly gross.
missing_dir=`cd $ac_aux_dir && pwd`
AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir)
AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir)
AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
AC_REQUIRE([AC_PROG_MAKE_SET])])
# Copyright 2002 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION so it can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
[AM_AUTOMAKE_VERSION([1.4-p6])])
#
# Check to make sure that the build environment is sane.
#
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
if test "[$]*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
if test "[$]*" != "X $srcdir/configure conftestfile" \
&& test "[$]*" != "X conftestfile $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
test "[$]2" = conftestfile
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
rm -f conftest*
AC_MSG_RESULT(yes)])
dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
dnl The program must properly implement --version.
AC_DEFUN([AM_MISSING_PROG],
[AC_MSG_CHECKING(for working $2)
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if ($2 --version) < /dev/null > /dev/null 2>&1; then
$1=$2
AC_MSG_RESULT(found)
else
$1="$3/missing $2"
AC_MSG_RESULT(missing)
fi
AC_SUBST($1)])
# Configure paths for GTK+
# Owen Taylor 97-11-3
dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
dnl
AC_DEFUN(AM_PATH_GTK,
[dnl
dnl Get the cflags and libraries from the gtk-config script
dnl
AC_ARG_WITH(gtk-prefix,[ --with-gtk-prefix=PFX Prefix where GTK is installed (optional)],
gtk_config_prefix="$withval", gtk_config_prefix="")
AC_ARG_WITH(gtk-exec-prefix,[ --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
AC_ARG_ENABLE(gtktest, [ --disable-gtktest Do not try to compile and run a test GTK program],
, enable_gtktest=yes)
for module in . $4
do
case "$module" in
gthread)
gtk_config_args="$gtk_config_args gthread"
;;
esac
done
if test x$gtk_config_exec_prefix != x ; then
gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
if test x${GTK_CONFIG+set} != xset ; then
GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
fi
fi
if test x$gtk_config_prefix != x ; then
gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
if test x${GTK_CONFIG+set} != xset ; then
GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
fi
fi
AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
min_gtk_version=ifelse([$1], ,0.99.7,$1)
AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
no_gtk=""
if test "$GTK_CONFIG" = "no" ; then
no_gtk=yes
else
GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_gtktest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$GTK_LIBS $LIBS"
dnl
dnl Now check if the installed GTK is sufficiently new. (Also sanity
dnl checks the results of gtk-config to some extent
dnl
rm -f conf.gtktest
AC_TRY_RUN([
#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.gtktest");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = g_strdup("$min_gtk_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
printf("%s, bad version string\n", "$min_gtk_version");
exit(1);
}
if ((gtk_major_version != $gtk_config_major_version) ||
(gtk_minor_version != $gtk_config_minor_version) ||
(gtk_micro_version != $gtk_config_micro_version))
{
printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
$gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
gtk_major_version, gtk_minor_version, gtk_micro_version);
printf ("*** was found! If gtk-config was correct, then it is best\n");
printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
printf("*** required on your system.\n");
printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
printf("*** before re-running configure\n");
}
#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
(gtk_minor_version != GTK_MINOR_VERSION) ||
(gtk_micro_version != GTK_MICRO_VERSION))
{
printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
printf("*** library (version %d.%d.%d)\n",
gtk_major_version, gtk_minor_version, gtk_micro_version);
}
#endif /* defined (GTK_MAJOR_VERSION) ... */
else
{
if ((gtk_major_version > major) ||
((gtk_major_version == major) && (gtk_minor_version > minor)) ||
((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
gtk_major_version, gtk_minor_version, gtk_micro_version);
printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
major, minor, micro);
printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
printf("***\n");
printf("*** If you have already installed a sufficiently new version, this error\n");
printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
printf("*** being found. The easiest way to fix this is to remove the old version\n");
printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
printf("*** correct copy of gtk-config. (In this case, you will have to\n");
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
printf("*** so that the correct libraries are found at run-time))\n");
}
}
return 1;
}
],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_gtk" = x ; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$GTK_CONFIG" = "no" ; then
echo "*** The gtk-config script installed by GTK could not be found"
echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the GTK_CONFIG environment variable to the"
echo "*** full path to gtk-config."
else
if test -f conf.gtktest ; then
:
else
echo "*** Could not run GTK test program, checking why..."
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
AC_TRY_LINK([
#include <gtk/gtk.h>
#include <stdio.h>
], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GTK or finding the wrong"
echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
echo "***"
echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
echo "*** came with the system with the command"
echo "***"
echo "*** rpm --erase --nodeps gtk gtk-devel" ],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means GTK was incorrectly installed"
echo "*** or that you have moved GTK since it was installed. In the latter case, you"
echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
GTK_CFLAGS=""
GTK_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(GTK_CFLAGS)
AC_SUBST(GTK_LIBS)
rm -f conf.gtktest
])
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_SUBST($1_TRUE)
AC_SUBST($1_FALSE)
if $2; then
$1_TRUE=
$1_FALSE='#'
else
$1_TRUE='#'
$1_FALSE=
fi])