/*
* Additional values not defined by other headers, they
* seem a little incomplete.
*
* Find codes in the various SCSI specs.
* BTW sense codes are at www.t10.org/lists/asc-num.txt
*
*/
#ifndef __TCMU_SCSI_DEFS
#define __TCMU_SCSI_DEFS
/*
* SCSI Opcodes
*/
#define READ_FORMAT_CAPACITIES 0x23
#define UNMAP 0x42
#define GET_CONFIGURATION 0x46
#define READ_DISC_INFORMATION 0x51
#define MODE_SELECT_10 0x55
#define MODE_SENSE_10 0x5a
#define EXTENDED_COPY 0x83
#define RECEIVE_COPY_RESULTS 0x84 /* RECEIVE COPY STATUS */
#define READ_16 0x88
#define COMPARE_AND_WRITE 0x89
#define WRITE_16 0x8a
#define WRITE_VERIFY_16 0x8e
#define SYNCHRONIZE_CACHE_16 0x91
#define WRITE_SAME_16 0x93
#define SERVICE_ACTION_IN_16 0x9e
#define READ_DVD_STRUCTURE 0xad
#define MECHANISM_STATUS 0xbd
#define MAINTENANCE_IN 0xa3
#define MAINTENANCE_OUT 0xa4
#define MI_REPORT_TARGET_PGS 0x0a
#define MO_SET_TARGET_PGS 0x0a
/*
* Receive Copy Results Sevice Actions
*/
#define RCR_SA_COPY_STATUS 0x00
#define RCR_SA_RECEIVE_DATA 0x01
#define RCR_SA_OPERATING_PARAMETERS 0x03
#define RCR_SA_FAILED_SEGMENT_DETAILS 0x04
/*
* Receive Copy Results Operating Parameters
*/
#define RCR_OP_MAX_TARGET_DESC_COUNT 0x02
#define RCR_OP_MAX_SEGMENT_DESC_COUNT 0x01
#define RCR_OP_MAX_DESC_LIST_LEN 1024
#define RCR_OP_MAX_SEGMENT_LEN 16777216
#define RCR_OP_TOTAL_CONCURR_COPIES 0x01
#define RCR_OP_MAX_CONCURR_COPIES 0x01
#define RCR_OP_DATA_SEG_GRAN_LOG2 0x09
#define RCR_OP_INLINE_DATA_GRAN_LOG2 0x09
#define RCR_OP_HELD_DATA_GRAN_LOG2 0x09
/*
* Receive Copy Results descriptor type codes supports
*/
#define RCR_OP_IMPLE_DES_LIST_LENGTH 0x02
#define XCOPY_SEG_DESC_TYPE_CODE_B2B 0x02 /* block --> block */
#define XCOPY_TARGET_DESC_TYPE_CODE_ID 0xe4 /* Identification descriptor */
/*
* Service action opcodes
*/
#define READ_CAPACITY_16 0x10
/* SCSI protocols; these are taken from SPC-3 section 7.5 */
enum scsi_protocol {
SCSI_PROTOCOL_FCP = 0, /* Fibre Channel */
SCSI_PROTOCOL_SPI = 1, /* parallel SCSI */
SCSI_PROTOCOL_SSA = 2, /* Serial Storage Architecture - Obsolete */
SCSI_PROTOCOL_SBP = 3, /* firewire */
SCSI_PROTOCOL_SRP = 4, /* Infiniband RDMA */
SCSI_PROTOCOL_ISCSI = 5,
SCSI_PROTOCOL_SAS = 6,
SCSI_PROTOCOL_ADT = 7, /* Media Changers */
SCSI_PROTOCOL_ATA = 8,
SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
};
/*
* SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
* T10/1561-D Revision 4 Draft dated 7th November 2002.
*/
#define SAM_STAT_GOOD 0x00
#define SAM_STAT_CHECK_CONDITION 0x02
#define SAM_STAT_CONDITION_MET 0x04
#define SAM_STAT_BUSY 0x08
#define SAM_STAT_INTERMEDIATE 0x10
#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
#define SAM_STAT_RESERVATION_CONFLICT 0x18
#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */
#define SAM_STAT_TASK_SET_FULL 0x28
#define SAM_STAT_ACA_ACTIVE 0x30
#define SAM_STAT_TASK_ABORTED 0x40
#define ALUA_ACCESS_STATE_OPTIMIZED 0x0
#define ALUA_ACCESS_STATE_NON_OPTIMIZED 0x1
#define ALUA_ACCESS_STATE_STANDBY 0x2
#define ALUA_ACCESS_STATE_UNAVAILABLE 0x3
#define ALUA_ACCESS_STATE_LBA_DEPENDENT 0x4
#define ALUA_ACCESS_STATE_OFFLINE 0xe
#define ALUA_ACCESS_STATE_TRANSITIONING 0xf
#define ALUA_SUP_OPTIMIZED 0x01
#define ALUA_SUP_NON_OPTIMIZED 0x02
#define ALUA_SUP_STANDBY 0x04
#define ALUA_SUP_UNAVAILABLE 0x08
#define ALUA_SUP_LBA_DEPENDENT 0x10
#define ALUA_SUP_OFFLINE 0x40
#define ALUA_SUP_TRANSITIONING 0x80
#define TPGS_ALUA_NONE 0x00
#define TPGS_ALUA_IMPLICIT 0x10
#define TPGS_ALUA_EXPLICIT 0x20
#define ALUA_STAT_NONE 0x00
#define ALUA_STAT_ALTERED_BY_EXPLICIT_STPG 0x01
#define ALUA_STAT_ALTERED_BY_IMPLICIT_ALUA 0x02
#endif