$Id: README,v 1.26 2003/06/21 16:26:52 marvin Exp $
ARP Ping
By Thomas Habets <thomas@habets.pp.se>
Introduction
------------
Arping is a util to find out it a specific IP address on the LAN is 'taken'
and what MAC address owns it. Sure, you *could* just use 'ping' to find out if
it's taken and even if the computer blocks ping (and everything else) you still
get an entry in your ARP cache. But what if you aren't on a routable net? Or
the host blocks ping (all ICMP even)? Then you're screwed. Or you use arping.
Why it's not stupid
-------------------
Say you have a block of N real ARIN-assigned IP-addresses. You want to debug
the net and you don't know which IP addresses are taken. You can't ping anyone
before you take the IP, and you can't pick an IP before you know which are
already taken. Catch 22. But with arping you can 'ping' the IP and if you get
no response, the IP is available.
Example uses
------------
If some box is dumping non-IP (like IPX) garbage and you don't know which box
it is, you can ping by MAC to get the IP and fix the problem.
If you are on someone else's net and want to 'borrow' a real IP address instead
of using one of those 10.x.x.x-addresses the DHCP hands out you probably want
to know which ones are taken, or people will get mad (a friend of mine got a
call on his cellphone about 15 seconds after he accidentally 'stole' an IP,
oops).
Compiling
---------
Type 'make linux' to compile under Linux and 'make openbsd' to compile under
openbsd. Follow this pattern for compilation under Solaris and FreeBSD.
If you have some other OS, try all before mailing me.
'make install' will copy arping to /usr/local/bin, and put the manpage where
it belongs.
How it does it
--------------
See 'Technical' at the bottom of this file.
FAQ
---
Q: It doesn't compile!
A: Arping 2.x will not work with Libnet 1.0.x. This is This is due to
libnet 1.1.x being completely different from 1.0.x. There is no
real way to write code that works on both 1.0.x and 1.1.x.
Since I wanted to do some other things a bit differently, I wrote
arping 2.x. It isn't as widely tested as arping 1.x, but it seems
to work fine.
Arping 2.x is now the default target, but arping 1.x is still here.
Arping 1.x is included in this release and can be created
with "make arping1" and follow instructions.
---
Q: After compiling arping without any problem, i test it first with
localhost... but it doesn't respond. Isn't that strange?
A: Not really, as you can see by typing 'ifconfig' the lo (local) interface
does not have a MAC address. It's not a physical device! MAC addresses are
there to differentiate computers on a shared medium (the aether, or ether)
and since packets to localhost does not go over any wire there is no need
to identify which box is talking to which. There is only one.
---
Q: Arping can't ping anything!
A: Check which interface is active with -v. If it's the wrong one, use -i
to set it right.
---
Q: Arping finds some hosts, but not others. why? BTW, I have several NICs.
A: You have to choose interface with the -i switch if the default is wrong for
you.
---
Q: I tried to ping my own MAC address, but it doesn't work.
A: A sane OS will think it's suspicious if you send packets to yourself over
the wire and will ignore them.
And why would you want to lookup the IP or MAC of yourself? ifconfig
can tell you that.
---
Q: I can't ping any/some MAC address on my LAN.
A: Arping when pinging a MAC relies on the host to answer a broadcast ping
(icmp echo request) properly (IIRC: not the windows way). If you want a
host to pop up on MAC ping, you have to config it to respond to broadcast
pings.
(for linux, make sure /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts is 0)
A: -T <IP/host> allows you to restrict the arping to a limited subnet, which
may or may not work for you. For example if the box 00:01:02:03:04:05 is on
192.168.0.0/24 then the broadcast probably is 192.168.0.255, so try:
# arping -T 192.168.0.255 00:01:02:03:04:05
---
Q: It doesn't compile, I get some error message about libnet and/or libpcap
A: Arping depends on libnet and libpcap, get libnet at:
http://www.packetfactory.net/libnet and libpcap from your distribution.
(alt. you can search for libpcap on http://freshmeat.net)
---
Q: I get this when I compile: "/bin/sh: libnet-config: command not found"
A: You didn't really read the last question, did you? Go back up 6 lines.
---
Q: I get bus error on my bigendian box
A: Damn, I thought I fixed those. Tell me how you got it and I'll try to fix
it.
---
Q: I get "libnet_get_ipaddr(): no error" when I run arping with IP (src or dst)
255.255.255.255.
A: Use the -b/-B switches. Libnet sucks (ha ha only serious) and returns -1 for
error == int32 encoded 255.255.255.255.
---
Q: I used to be able to use -S 255.255.255.255, now it fails. What's going on?
Q: Why can't I arping 255.255.255.255?
A: Argh! Why would you want to? Anyway, this one is due to libnets resolving,
and my unwillingness to reimplement it (in a portable manner, ugh).
-S 255.255.255.255 can be replaced with -b, and pinging broadcast (why you
would do that eludes me) -B.
To be extra perverted, try:
# ./arping -b -B
(yes, I added -b and -B just so that version 1.0 should be complete)
---
Q: 1.01 is out, didn't you just say 1.0 was supposed to be the last one?
A: Shut up.
---
Q: The roundtrip times are off, sometimes by milliseconds!
A: I know.
Short answer:
'ping' does the same thing. (ping from iputils-ss010824 anyway)
Long answer:
I can't (portably anyway) do anything other than queue a packet
to the network. That means I don't know exactly when it arrived. Also,
I can't tell when a packet arrives on the wire, only when arping gets
it from the kernel. Just make sure neither the network (whole segment
if you are hubbed, just your NIC if you are switched) nor your box is
loaded when you care about timing, and/or run arping with higher
priority.
# nice -n -15 arping foobar
But if you find way to get more exact timing portably (or just for one
OS really), let me know.
---
Q: Is it OK to make arping suid root?
A: Be my guest, but if care about security *at all* you will have to restrict
execution of arping to trusted users. I could remove "dangerous" features
from the code when it's running suid, but I honestly don't want to. This is
a network debugging tool, which generates low-level network packets that
ordinary users have absolutely no business generating.
For example, I don't protect against an ALRM signal flood, which will result
in a packet flood. (arping 2.x doesn't have this issue)
If you are honestly debugging the network then I don't see why you aren't
root already.
If you think I'm wrong, tell me why.
---
Q: What's this -A switch all about, I don't understand it.
A: Normally arping packets are sent out to some kind of broadcast (MAC or IPv4
broadcast) and hosts reply with source address == their address.
If -A is given, only packets coming in with a *source* address equal
to the *destination* address in the query is accepted.
If you don't understand, don't worry. You won't need it. But for an
example use, see the arping-scan-net.sh script.
---
Q: Arping used to work (0.97 and down) for pinging MACs, but not with 0.98 and
up. What did you screw up?
A: Ah, I see. A broadcast was changed to unicast, I don't know why I set it to
be broadcast in the first place, and even wrote a comment justifying it.
It still worked for me when I tested it now (with unicast) but if it
doesn't for you, search the source for KEYWORD and you'll find
instructions on how to change it back.
... Or you can run arping -s ff:ff:ff:ff:ff:ff <host>.
If this fixes it please LET ME KNOW.
---
Q: 1.08 and up is broken, 1.07 and down worked. What's up with that?
A: If there are any problems, it should be with the interface-finding code.
Try compiling with 'make linux-nofindif'.
Also, try with the -F switch, and mail me if that worked (or didn't work).
---
Q: Hey! Wasn't this Marvins program? You thief!
A: We are the same person.
---
Q: Say hi to Psychad for me.
A: Will do.
---
Misc
----
There, I added the stupid roundtrip time feature. Now I dare you to think of
any other applicable features. (IPv4 only, for now and probably forever)
Ok, two more were thought of. Both of which are non-trivially-portable.
1) Automatically select interface depending on IP address pinged for more than
Linux.
2) Don't use SIGARLM. Non-trivial because you can't (AFAIK) select() on a pcap-
opened device.
Arping 2.x solves the second one, and the first one has a beta solution in
Linux.
License
-------
It's GPL, see the LICENSE file.
Technical
---------
Yes, I've finally bothered to write how it works.
tcpdumps were taken with "tcpdump -vven 'arp or icmp'".
The source box is 192.168.0.2/0:10:5a:3e:c5:b4 and the target box is
192.168.0.1/0:60:93:34:91:99.
For pinging IP addresses:
When a host wants to send an IP packet to another host, it sends out an ARP
packet asking what MAC the destination IP address has, a so-called 'who-has'
packet. This is then answered by another ARP packet, the 'is-at' packet.
18:16:07.179699 0:10:5a:3e:c5:b4 ff:ff:ff:ff:ff:ff 0806 42:
arp who-has 192.168.0.1 tell 192.168.0.2
This is the packet generated by arping.
An Ethernet frame from my 3com card to the broadcast address carrying an arp
packet asking what MAC 192.168.0.1 has (who-has).
18:16:07.180221 0:60:93:34:91:99 0:10:5a:3e:c5:b4 0806 60:
arp reply 192.168.0.1 is-at 0:60:93:34:91:99
The answer, that 192.168.0.1 has MAC 0:60:93:34:91:99 (is-at).
For pinging MAC addresses:
A broadcast ping (255.255.255.255, or any address supplied with -T, see below)
is sent out on the Ethernet, but in an Ethernet frame addressed to the target
MAC only.
18:20:09.627321 0:10:5a:3e:c5:b4 0:60:93:34:91:99 0800 42:
192.168.0.2 > 255.255.255.255: icmp: echo request
(ttl 48, id 17767, len 28)
This is the packet generated by arping.
Ethernet frame from my 3com NIC to the destination MAC, carrying a broadcast
ping.
18:20:09.628432 0:60:93:34:91:99 0:10:5a:3e:c5:b4 0800 60:
192.168.0.1 > 192.168.0.2: icmp: echo reply
(ttl 255, id 7593, len 28)
The answer, including the source address of the target host. Note that this
is not how every OS responds to a broadcast ping (if at all). Some answer with
a source address equal to the broadcast address, and others don't' answer at
all.
This is why pinging a raw MAC doesn't always work, and you may need to play
with -T to get it to answer correctly (or at all). You can always brute-force
if you can't even find a broadcast that the box will answer correctly to.
-------
for d in $(seq 0 255); do
sudo arping -q -c 1 -T $a.$b.$c.$d 0:60:93:34:91:99
if [ $? = 0 ]; then
echo "Got answer with address: 192.168.0.$d"
fi
done
--------
Note that this script will take 1 second per IP since that is how long arping
waits, so scanning a C-class net will take 256 seconds. If you have a bigger
net, then write a program that will run several arpings at the same time to
go through more in less time, or check out arping-scan-net.sh, which is a
more capable script for scanning, but you need to edit it since the address
range it searches is hard-coded.
I may add this to arping some day, but don't hold your breath.
----------------------------------------------------------------------------
Send questions/suggestions/patches/rants/money/alphas to thomas@habets.pp.se