Latest update: 3 November 2020
Adapted from the Cairo coding style document

Libdwarf/dwarfdump  coding style.

This document is intended to be a short description of the
preferred coding style for the cairo source code. Good style
requires good taste, which means this can't all be reduced
to automated rules, and there are exceptions.

We want the code to be easy to understand and maintain, and
consistent style plays an important part in that, even if
some of the specific details seem trivial. If nothing else,
this document gives a place to put consistent answers for
issues that would otherwise be arbitrary.

Most of the guidelines here are demonstrated by examples,
(which means this document is quicker to read than it might
appear given its length). Most of the examples are positive
examples that you should imitate. The few negative examples
are clearly marked with a comment of /* Yuck! */. Please
don't submit code for libdwarf that looks like any of these.

Indentation
-----------
Each new level is indented 4 more spaces than the previous level,
and an if is followed by a space and a left-paren:

    if (condition) {
        do_something();
    }
Done solely with space characters.  The simple project on
sourceforge.net, dicheck-da, detects all instances of tabs,
improper indentation and line-ending whitespace.

Similarly, for is to have a single space after the r followed by 
a left_paren.
    for (v; condition; v2) {
        do_something();
    }

Tab characters
--------------
The tab character must never appear.

Braces
------
Most of the code in cairo uses bracing in the style of K&R:

    if (condition) {
        do_this();
        do_that();
    } else {
        do_the_other();
    }

and that is the preferred style.

Even if all of the substatements of an if statement are single
statements, the optional braces must always appear.

    if (condition) {
        do_this();
    } else {
        do_that();
    }

Never
    if (condition)      /* Yuck */
        do_this();      /* Yuck */
    else                /* Yuck */
        do_the_other(); /* Yuck */

Note that this last example also shows a situation in which the
opening brace can be on its own line, though usually it looks
like this example. The following can be difficult to read.

	if (condition &&
	    other_condition &&
	    yet_another) { /* But we usually do put the brace here */	
	    do_something();
	}



Whitespace
----------
Separate logically distinct chunks with a single newline. This
obviously applies between functions, but also applies within
a function or block and can even be used to good effect
within a structure definition. But don't get carried away
with blank lines:

struct _Dwarf_Data_s {
    struct Something_s  op;
    double tolerance;
    Dwarf_Unsigned line_width;
    Dwarf_Unsigned line_height;
    Dwarf_Unsigned line_thickness;
    
    /*  Notice the _s on struct declarations
        And notice indent of this comment
        and the blank line above this comment to
        make it clear the comment applies to fill_rule. */
    struct Reg_Struct_s  fill_rule;
    Dwarf_Signed distance_from_end;
    ...
};


Never use a space before a function-call left parenthesis
or a macro-call left parenthesis. 

Don't eliminate newlines just because things would still fit
on one line. This breaks the expected visual structure of
the code making it much harder to read and understand:

    ();	/* Yuck! */

Eliminate trailing whitespace on any line. Also, avoid putting
initial or final blank lines into any file, and never use
multiple blank lines instead of a single blank line.

Use dicheck (see above) to find trailing whitespace
and indentation inconsistencies.

You might find the git-stripspace utility helpful which
acts as a filter to remove trailing whitespace as well as
initial, final, and duplicate blank lines.

As a special case of the bracing and whitespace guidelines,
function definitions  in libdwarf should always take the following form:

    int
    my_function (Dwarf_Debug dbg, Dwarf_Unsigned second_arg,
        Dwarf_Unsigned* ret_value;
        Dwarf_Error *error)
    {
        do_my_things();
        /*  The meaning of life */
        *ret_value = 42;
        return DW_DLV_OK;
    }

And in dwarfdump, etc, the code tends to follow this form
too (but far from always).


Function prototypes inside libdwarf headers 
(as opposed to .c files)
usually have the return type
(and associated specifiers and qualifiers) the same
line as the function name. If the line gets long
addtional lines are appropriate.

Function prototypes inside libdwarf.h always comment
out argument names (but not types) to preserve the caller's
macro namespace.  Because it is a public header, unlike
all the other headers in libdwarf/dwarfdump/simpleexample.

In .c files the function name starts a line as shown above.

Notice, above, how a too-long argument line gets folded
with standard indentation(4).

Break up long lines (> ~72 characters) and use whitespace to
align things nicely. For example the arguments in a long list
to a function call should all (but the first) be aligned with
each other:

    align_function_arguments (argument_the_first,
        argument_the_second,
        argument_the_third);

And as a special rule, in a function prototype, (as well as
in the definition), whitespace should be inserted between
the parameter types and names so that the names are aligned:

    void
    align_parameter_names_in_prototypes (const char *char_star_arg,
        int	 int_arg,
        double	*double_star_arg,
        double	 double_arg);

Parameters with a * prefix are aligned one character
to the left so that the actual names are aligned.

Struct Format and Content
-------------------------

Usually, avoid adding a comment alongside declarations
unless it is a very short comment.  The following example
uses meaningless x y z field names (sorry), but but does
show a short prefix related to the struct name.  Generally
struct members should have a prefix common to that struct and
hopefully distinct from other struct declarations.  This short
prefix makes it much easier to find all uses of a particular
field in the code (with grep).

    struct Dwarf_Nothing_Special_s {
        int ns_x; /* usually avoid comment here this is Yuck!
            and this is even worse as continuation.  Yuck! */

        /*  Comment here about y with blank line above
            and belows to make it clear which line 
            referred to. */  
        unsigned ns_y;

        unsigned ns_z; 
    };


Managing nested blocks
----------------------
Long blocks that are deeply nested make the code very hard
to read. Fortunately such blocks often indicate logically
distinct chunks of functionality that are begging to be split
into their own functions. Please listen to the blocks when
they beg.  You will notice many exceptions to this in the
code, unfortunately.

In other cases, gratuitous nesting comes about because the
primary functionality gets buried in a nested block rather
than living at the primary level where it belongs. Consider
the following:

    foo = malloc (sizeof (foo_t));
    if (foo) { /* Yuck! The error return becomes
               hard to see.  */
        ...  
        /* lots of code to initialize foo */
        ...
        return DW_DLV_OK;
    }
    _dwarf_error(dbg,error,DW_DLE_MALLOC_RETURNS_NULL);
    return DW_DLV_ERROR;

This kind of gratuitous nesting can be avoided by following
a pattern of handling exceptional cases early and returning:

    foo = malloc (sizeof (foo_t));
    /*  A test foo == NULL is fine but the following
        is better as there is  no danger of 
        turning == into = by accident. */
    if (!foo) {
        _dwarf_error(dbg,error,DW_DLE_MALLOC_RETURNS_NULL);
        return DW_DLV_ERROR;
    }
    ...
    lots of code to initialize foo */
	
    return DW_DLV_OK;


The return statement is often the best thing to use in a
pattern like this. If it's not available due to additional
nesting above which require some cleanup after the current
block, then consider splitting the current block into a new
function before using goto.

Test or Loop with Side Effect
-----------------------------

Never do:
    if ((foo = malloc (sizeof (foo_t)))) {
or
    if (foo = malloc (sizeof (foo_t))) {

as the reader has to think carefully about it, 
whereas
    foo = malloc (sizeof (foo_t));
    if (foo) {
is more transparent (in some sense) and 
makes it easier to stop( in debugger) or
add a printf in case this is a point where
things might be going wrong somehow.

Also see "Managing nested blocks" just above.


Macro Tests Commented
---------------------

#ifdef SOME_MACRO
#else /* !SOME_MACRO */ 
#endif /* !SOME_MACRO */

#ifdef OTHER_MACRO
#endif /* OTHER_MACRO */

The comments add clarity when one is not familiar with code in
the area but are not required if the #else #endif are within a
couple lines of the #if(def).  In a spot with nested #if(def)
the comments become necessary to avoid confusing the reader.
There is nothing wrong with adding them everywhere.

Lookup Tables
-----------------

Any situation requiring a lookup table should use one
or the other tsearch functions. The practical ones are
dwarf_tsearchhash.c and dwarf_tsearchbal.c.  dwarfdump and
libdwarf each use one of them and only one of them.  See the
tsearch directory to see the full set available.

These use the traditional UNIX tsearch arguments and return
values even though those are not good designs by current
standards. Expanded to have destroy() functions whose prototype
was copied from GNU man pages.

GNU libc has much nicer (in the sense of much nicer interface
designs)  non-standard tsearch functions, but we've ignored
those to keep to the official Single Unix Specification
standard interfaces.

Libdwarf Namespace
-----------------

In libdwarf we are careful to name things visible to callers
(and in libdwarf.h) starting with with dwarf (for public stuff)
or _dwarf (for functions in the library not intended for
public use.  Structs begin with Dwarf.  Macros begin with DW
(dwarf.h is full of those!).



Memory allocation
-----------------

In general, be wary of performing any arithmetic operations
in an argument to malloc.  You should explicitly check for
integer overflow yourself in any more complex situations.

In libdwarf most allocations use _dwarf_alloc() instead of
malloc.  And the tables of valid types (which are predefined
in libdwarf) allow for constructor/destructor functions.
The _dwarf_alloc() code keeps a record of what is allocated
so a careless user can simply call dwarf_finish() at the end
and all the allocated data will be freed that was not already
freed via  user calls to dwarf_dealloc().

Checking For Overflow
---------------------

Libdwarf and dwarfdump are often dealing with offsets and
indexes read from disk object files and all such should be
checked before use.  That approach means that dwarfdump (and
libdwarf callers in general) need not check the things that
libdwarf has returned (at least those libdwarf could check).

When it is possible that  X +Y might overflow make every effort
to check X an Y independently before attempting an addition.
If you are confident X and Y are sensible (given available data
like section sizes) you can add them and then determine if
the sum (say an offset) is still within the relevant section
or data-item usable range.

There are many libdwarf-internal functions to read data from
an object, and all of them require an end-pointer argument
so the code can easly check for corrupt object-file or DWARF
values without duplicating the error-code-setting.

Dwarfdump Flags Data
---------------------

Dwarfdump has a large number of options and nearly all  the
option  values are recorded as fields in a single global
structure  glflags (see dwarfdump.c).  Option data not in that
structure should be moved into it, in general. This makes
it much simpler to find instances using flags and to know,
reading dwarfdump source, when flags are being referred to..

The text in this document (not the examples!)  was formatted
with the vi command "!}fmt -64"...without the quotes.