<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" xmlns:cura="http://www.ultimaker.com/cura" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PLA</material>
            <color>Red</color>
        </name>
        <GUID>9cfe5bf1-bdc5-4beb-871a-52c70777842d</GUID>
        <version>39</version>
        <color_code>#bb1e10</color_code>
        <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
        <adhesion_info>Print on bare glass. Use tape for cold build plates.</adhesion_info>
        <instruction_link>https://ultimaker.com/in/cura/materials/ultimaker-pla/printing-guidelines</instruction_link>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>2.85</diameter>
        <weight>750</weight>
    </properties>
    <settings>
        <!-- Deprime settings -->
        <setting key="anti ooze retract position">-4</setting>
        <setting key="anti ooze retract speed">50</setting>
        <setting key="break preparation position">-16</setting>
        <setting key="break preparation speed">50</setting>
        <setting key="break preparation temperature">210</setting>
        <setting key="break position">-50</setting>
        <setting key="break speed">25</setting>
        <setting key="break temperature">60</setting>
        <setting key="pressure release dwell time">25</setting>
        <setting key="dwell time before break preparation move">4</setting>
        <setting key="end of print purge volume">0</setting>
        <setting key="end of filament purge volume">0</setting>
        <setting key="flush purge length">60</setting>

        <!-- material station (un)loading settings -->
        <setting key="maximum park duration">7200</setting>
        <setting key="no load move factor">0.91</setting>

        <!-- print settings -->
        <setting key="print temperature">200</setting>
        <setting key="standby temperature">100</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="build volume temperature">28</setting>
        <setting key="print cooling">100</setting>
        <setting key="adhesion tendency">0</setting>
        <setting key="surface energy">100</setting>

        <!-- For material flow sensor -->
        <setting key="relative extrusion">1.0</setting>
        <setting key="flow sensor detection margin">0.8</setting>
        <setting key="retract compensation">0</setting>

        <machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 2+"/>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 2 Extended+"/>

            <hotend id="0.25 mm" />
            <hotend id="0.4 mm" />
            <hotend id="0.6 mm" />
            <hotend id="0.8 mm" />
        </machine>

        <machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 2"/>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 2 Go"/>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 2 Extended"/>
            <setting key="processing temperature graph">
                <point flow="2" temperature="180"/>
                <point flow="10" temperature="230"/>
            </setting>
        </machine>

        <machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker Original"/>
        </machine>

        <machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
            <setting key="print cooling">100</setting>
            <hotend id="AA 0.25">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">6.5</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">yes</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">5</setting>
                <cura:setting key="cool_min_layer_time">10</cura:setting>
            </hotend>
        </machine>

        <machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 2+ Connect"/>
            <setting key="hardware compatible">yes</setting>
            <hotend id="0.25 mm">
                <setting key="print temperature">195</setting>
            </hotend>
            <hotend id="0.4 mm">
                <setting key="print temperature">210</setting>
            </hotend>
            <hotend id="0.6 mm">
                <setting key="print temperature">230</setting>
            </hotend>
            <hotend id="0.8 mm">
                <setting key="print temperature">240</setting>
                <cura:setting key="cool_min_layer_time">10</cura:setting>
            </hotend>
        </machine>

        <machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker S3"/>
            <setting key="print cooling">100</setting>
            <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <cura:setting key="material_shrinkage_percentage_z">100.1</cura:setting>
            <hotend id="AA 0.25">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">6.5</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">yes</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">5</setting>
                <cura:setting key="cool_min_layer_time">10</cura:setting>
            </hotend>
            <hotend id="CC 0.4">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">6.5</setting>
            </hotend>
            <hotend id="CC 0.6">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">6.5</setting>
                <cura:setting key="cool_min_layer_time">10</cura:setting>
            </hotend>

        </machine>

        <machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker S5"/>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker S7"/>

            <setting key="print cooling">100</setting>
            <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <cura:setting key="material_shrinkage_percentage_z">100.1</cura:setting>
            <hotend id="AA 0.25">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">6.5</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">yes</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">5</setting>
                <cura:setting key="cool_min_layer_time">10</cura:setting>
            </hotend>
            <hotend id="CC 0.4">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">6.5</setting>
                <cura:setting key="material_crystallinity">true</cura:setting>
            </hotend>
            <hotend id="CC 0.6">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction amount">6.5</setting>
                <cura:setting key="cool_min_layer_time">10</cura:setting>
                <cura:setting key="material_crystallinity">true</cura:setting>
            </hotend>
        </machine>


    </settings>
</fdmmaterial>