/*
* This file is part of the flashrom project.
*
* Copyright (C) 2005-2007 coresystems GmbH <stepan@coresystems.de>
* Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de>
* Copyright (C) 2007-2008 Luc Verhaegen <libv@skynet.be>
* Copyright (C) 2007 Carl-Daniel Hailfinger
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Contains the board specific flash enables.
*/
#include <stdio.h>
#include <pci/pci.h>
#include <stdint.h>
#include <string.h>
#include <fcntl.h>
#include "flash.h"
/*
* Helper functions for many Winbond Super I/Os of the W836xx range.
*/
/* Enter extended functions */
void w836xx_ext_enter(uint16_t port)
{
OUTB(0x87, port);
OUTB(0x87, port);
}
/* Leave extended functions */
void w836xx_ext_leave(uint16_t port)
{
OUTB(0xAA, port);
}
/* General functions for reading/writing Winbond Super I/Os. */
unsigned char wbsio_read(uint16_t index, uint8_t reg)
{
OUTB(reg, index);
return INB(index + 1);
}
void wbsio_write(uint16_t index, uint8_t reg, uint8_t data)
{
OUTB(reg, index);
OUTB(data, index + 1);
}
void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask)
{
uint8_t tmp;
OUTB(reg, index);
tmp = INB(index + 1) & ~mask;
OUTB(tmp | (data & mask), index + 1);
}
/**
* Winbond W83627HF: Raise GPIO24.
*
* Suited for:
* - Agami Aruma
* - IWILL DK8-HTX
*/
static int w83627hf_gpio24_raise(uint16_t index, const char *name)
{
w836xx_ext_enter(index);
/* Is this the W83627HF? */
if (wbsio_read(index, 0x20) != 0x52) { /* Super I/O device ID reg. */
fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n",
name, wbsio_read(index, 0x20));
w836xx_ext_leave(index);
return -1;
}
/* PIN89S: WDTO/GP24 multiplex -> GPIO24 */
wbsio_mask(index, 0x2B, 0x10, 0x10);
/* Select logical device 8: GPIO port 2 */
wbsio_write(index, 0x07, 0x08);
wbsio_mask(index, 0x30, 0x01, 0x01); /* Activate logical device. */
wbsio_mask(index, 0xF0, 0x00, 0x10); /* GPIO24 -> output */
wbsio_mask(index, 0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */
wbsio_mask(index, 0xF1, 0x10, 0x10); /* Raise GPIO24 */
w836xx_ext_leave(index);
return 0;
}
static int w83627hf_gpio24_raise_2e(const char *name)
{
return w83627hf_gpio24_raise(0x2e, name);
}
/**
* Winbond W83627THF: GPIO 4, bit 4
*
* Suited for:
* - MSI K8T Neo2-F
* - MSI K8N-NEO3
*/
static int w83627thf_gpio4_4_raise(uint16_t index, const char *name)
{
w836xx_ext_enter(index);
/* Is this the W83627THF? */
if (wbsio_read(index, 0x20) != 0x82) { /* Super I/O device ID reg. */
fprintf(stderr, "\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n",
name, wbsio_read(index, 0x20));
w836xx_ext_leave(index);
return -1;
}
/* PINxxxxS: GPIO4/bit 4 multiplex -> GPIOXXX */
wbsio_write(index, 0x07, 0x09); /* Select LDN 9: GPIO port 4 */
wbsio_mask(index, 0x30, 0x02, 0x02); /* Activate logical device. */
wbsio_mask(index, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */
wbsio_mask(index, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */
wbsio_mask(index, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */
w836xx_ext_leave(index);
return 0;
}
static int w83627thf_gpio4_4_raise_2e(const char *name)
{
return w83627thf_gpio4_4_raise(0x2e, name);
}
static int w83627thf_gpio4_4_raise_4e(const char *name)
{
return w83627thf_gpio4_4_raise(0x4e, name);
}
/**
* Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs.
*
* We don't need to do this when using coreboot, GPIO15 is never lowered there.
*/
static int board_via_epia_m(const char *name)
{
struct pci_dev *dev;
uint16_t base;
uint8_t val;
dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
if (!dev) {
fprintf(stderr, "\nERROR: VT8235 ISA bridge not found.\n");
return -1;
}
/* GPIO12-15 -> output */
val = pci_read_byte(dev, 0xE4);
val |= 0x10;
pci_write_byte(dev, 0xE4, val);
/* Get Power Management IO address. */
base = pci_read_word(dev, 0x88) & 0xFF80;
/* Enable GPIO15 which is connected to write protect. */
val = INB(base + 0x4D);
val |= 0x80;
OUTB(val, base + 0x4D);
return 0;
}
/**
* Suited for:
* - ASUS A7V8X-MX SE and A7V400-MX: AMD K7 + VIA KM400A + VT8235
* - Tyan Tomcat K7M: AMD Geode NX + VIA KM400 + VT8237.
*/
static int board_asus_a7v8x_mx(const char *name)
{
struct pci_dev *dev;
uint8_t val;
dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
if (!dev)
dev = pci_dev_find(0x1106, 0x3227); /* VT8237 ISA bridge */
if (!dev) {
fprintf(stderr, "\nERROR: VT823x ISA bridge not found.\n");
return -1;
}
/* This bit is marked reserved actually. */
val = pci_read_byte(dev, 0x59);
val &= 0x7F;
pci_write_byte(dev, 0x59, val);
/* Raise ROM MEMW# line on Winbond W83697 Super I/O. */
w836xx_ext_enter(0x2E);
if (!(wbsio_read(0x2E, 0x24) & 0x02)) /* Flash ROM enabled? */
wbsio_mask(0x2E, 0x24, 0x08, 0x08); /* Enable MEMW#. */
w836xx_ext_leave(0x2E);
return 0;
}
/**
* Suited for VIAs EPIA SP.
*/
static int board_via_epia_sp(const char *name)
{
struct pci_dev *dev;
uint8_t val;
dev = pci_dev_find(0x1106, 0x3227); /* VT8237R ISA bridge */
if (!dev) {
fprintf(stderr, "\nERROR: VT8237R ISA bridge not found.\n");
return -1;
}
/* All memory cycles, not just ROM ones, go to LPC */
val = pci_read_byte(dev, 0x59);
val &= ~0x80;
pci_write_byte(dev, 0x59, val);
return 0;
}
/**
* Suited for ASUS P5A.
*
* This is rather nasty code, but there's no way to do this cleanly.
* We're basically talking to some unknown device on SMBus, my guess
* is that it is the Winbond W83781D that lives near the DIP BIOS.
*/
static int board_asus_p5a(const char *name)
{
uint8_t tmp;
int i;
#define ASUSP5A_LOOP 5000
OUTB(0x00, 0xE807);
OUTB(0xEF, 0xE803);
OUTB(0xFF, 0xE800);
for (i = 0; i < ASUSP5A_LOOP; i++) {
OUTB(0xE1, 0xFF);
if (INB(0xE800) & 0x04)
break;
}
if (i == ASUSP5A_LOOP) {
printf("%s: Unable to contact device.\n", name);
return -1;
}
OUTB(0x20, 0xE801);
OUTB(0x20, 0xE1);
OUTB(0xFF, 0xE802);
for (i = 0; i < ASUSP5A_LOOP; i++) {
tmp = INB(0xE800);
if (tmp & 0x70)
break;
}
if ((i == ASUSP5A_LOOP) || !(tmp & 0x10)) {
printf("%s: failed to read device.\n", name);
return -1;
}
tmp = INB(0xE804);
tmp &= ~0x02;
OUTB(0x00, 0xE807);
OUTB(0xEE, 0xE803);
OUTB(tmp, 0xE804);
OUTB(0xFF, 0xE800);
OUTB(0xE1, 0xFF);
OUTB(0x20, 0xE801);
OUTB(0x20, 0xE1);
OUTB(0xFF, 0xE802);
for (i = 0; i < ASUSP5A_LOOP; i++) {
tmp = INB(0xE800);
if (tmp & 0x70)
break;
}
if ((i == ASUSP5A_LOOP) || !(tmp & 0x10)) {
printf("%s: failed to write to device.\n", name);
return -1;
}
return 0;
}
static int board_ibm_x3455(const char *name)
{
uint8_t byte;
/* Set GPIO lines in the Broadcom HT-1000 southbridge. */
OUTB(0x45, 0xcd6);
byte = INB(0xcd7);
OUTB(byte | 0x20, 0xcd7);
return 0;
}
static int board_hp_dl145_g3_enable(const char *name)
{
uint8_t byte;
/* Set GPIO lines in the Broadcom HT-1000 southbridge. */
OUTB(0x44, 0xcd6); /* GPIO 0 reg from PM regs */
byte = INB(0xcd7);
/* Set GPIO 2 and 5 high, connected to flash WP# and TBL# pins. */
OUTB(byte | 0x24, 0xcd7);
return 0;
}
/**
* Suited for EPoX EP-BX3, and maybe some other Intel 440BX based boards.
*/
static int board_epox_ep_bx3(const char *name)
{
uint8_t tmp;
/* Raise GPIO22. */
tmp = INB(0x4036);
OUTB(tmp, 0xEB);
tmp |= 0x40;
OUTB(tmp, 0x4036);
OUTB(tmp, 0xEB);
return 0;
}
/**
* Suited for Acorp 6A815EPD.
*/
static int board_acorp_6a815epd(const char *name)
{
struct pci_dev *dev;
uint16_t port;
uint8_t val;
dev = pci_dev_find(0x8086, 0x2440); /* Intel ICH2 LPC */
if (!dev) {
fprintf(stderr, "\nERROR: ICH2 LPC bridge not found.\n");
return -1;
}
/* Use GPIOBASE register to find where the GPIO is mapped. */
port = (pci_read_word(dev, 0x58) & 0xFFC0) + 0xE;
val = INB(port);
val |= 0x80; /* Top Block Lock -- pin 8 of PLCC32 */
val |= 0x40; /* Lower Blocks Lock -- pin 7 of PLCC32 */
OUTB(val, port);
return 0;
}
/**
* Suited for Artec Group DBE61 and DBE62.
*/
static int board_artecgroup_dbe6x(const char *name)
{
#define DBE6x_MSR_DIVIL_BALL_OPTS 0x51400015
#define DBE6x_PRI_BOOT_LOC_SHIFT (2)
#define DBE6x_BOOT_OP_LATCHED_SHIFT (8)
#define DBE6x_SEC_BOOT_LOC_SHIFT (10)
#define DBE6x_PRI_BOOT_LOC (3 << DBE6x_PRI_BOOT_LOC_SHIFT)
#define DBE6x_BOOT_OP_LATCHED (3 << DBE6x_BOOT_OP_LATCHED_SHIFT)
#define DBE6x_SEC_BOOT_LOC (3 << DBE6x_SEC_BOOT_LOC_SHIFT)
#define DBE6x_BOOT_LOC_FLASH (2)
#define DBE6x_BOOT_LOC_FWHUB (3)
unsigned long msr[2];
int msr_fd;
unsigned long boot_loc;
msr_fd = open("/dev/cpu/0/msr", O_RDWR);
if (msr_fd == -1) {
perror("open /dev/cpu/0/msr");
return -1;
}
if (lseek(msr_fd, DBE6x_MSR_DIVIL_BALL_OPTS, SEEK_SET) == -1) {
perror("lseek");
close(msr_fd);
return -1;
}
if (read(msr_fd, (void *)msr, 8) != 8) {
perror("read");
close(msr_fd);
return -1;
}
if ((msr[0] & (DBE6x_BOOT_OP_LATCHED)) ==
(DBE6x_BOOT_LOC_FWHUB << DBE6x_BOOT_OP_LATCHED_SHIFT))
boot_loc = DBE6x_BOOT_LOC_FWHUB;
else
boot_loc = DBE6x_BOOT_LOC_FLASH;
msr[0] &= ~(DBE6x_PRI_BOOT_LOC | DBE6x_SEC_BOOT_LOC);
msr[0] |= ((boot_loc << DBE6x_PRI_BOOT_LOC_SHIFT) |
(boot_loc << DBE6x_SEC_BOOT_LOC_SHIFT));
if (lseek(msr_fd, DBE6x_MSR_DIVIL_BALL_OPTS, SEEK_SET) == -1) {
perror("lseek");
close(msr_fd);
return -1;
}
if (write(msr_fd, (void *)msr, 8) != 8) {
perror("write");
close(msr_fd);
return -1;
}
close(msr_fd);
return 0;
}
/**
* Set the specified GPIO on the specified ICHx southbridge to high.
*
* @param name The name of this board.
* @param ich_vendor PCI vendor ID of the specified ICHx southbridge.
* @param ich_device PCI device ID of the specified ICHx southbridge.
* @param gpiobase_reg GPIOBASE register offset in the LPC bridge.
* @param gp_lvl Offset of GP_LVL register in I/O space, relative to GPIOBASE.
* @param gp_lvl_bitmask GP_LVL bitmask (set GPIO bits to 1, all others to 0).
* @param gpio_bit The bit (GPIO) which shall be set to high.
* @return If the write-enable was successful return 0, otherwise return -1.
*/
static int ich_gpio_raise(const char *name, uint16_t ich_vendor,
uint16_t ich_device, uint8_t gpiobase_reg,
uint8_t gp_lvl, uint32_t gp_lvl_bitmask,
unsigned int gpio_bit)
{
struct pci_dev *dev;
uint16_t gpiobar;
uint32_t reg32;
dev = pci_dev_find(ich_vendor, ich_device); /* Intel ICHx LPC */
if (!dev) {
fprintf(stderr, "\nERROR: ICHx LPC dev %4x:%4x not found.\n",
ich_vendor, ich_device);
return -1;
}
/* Use GPIOBASE register to find the I/O space for GPIO. */
gpiobar = pci_read_word(dev, gpiobase_reg) & gp_lvl_bitmask;
/* Set specified GPIO to high. */
reg32 = INL(gpiobar + gp_lvl);
reg32 |= (1 << gpio_bit);
OUTL(reg32, gpiobar + gp_lvl);
return 0;
}
/**
* Suited for ASUS P4B266.
*/
static int ich2_gpio22_raise(const char *name)
{
return ich_gpio_raise(name, 0x8086, 0x2440, 0x58, 0x0c, 0xffc0, 22);
}
/**
* Suited for MSI MS-7046.
*/
static int ich6_gpio19_raise(const char *name)
{
return ich_gpio_raise(name, 0x8086, 0x2640, 0x48, 0x0c, 0xffc0, 19);
}
static int board_kontron_986lcd_m(const char *name)
{
struct pci_dev *dev;
uint16_t gpiobar;
uint32_t val;
#define ICH7_GPIO_LVL2 0x38
dev = pci_dev_find(0x8086, 0x27b8); /* Intel ICH7 LPC */
if (!dev) {
// This will never happen on this board
fprintf(stderr, "\nERROR: ICH7 LPC bridge not found.\n");
return -1;
}
/* Use GPIOBASE register to find where the GPIO is mapped. */
gpiobar = pci_read_word(dev, 0x48) & 0xfffc;
val = INL(gpiobar + ICH7_GPIO_LVL2); /* GP_LVL2 */
printf_debug("\nGPIOBAR=0x%04x GP_LVL: 0x%08x\n", gpiobar, val);
/* bit 2 (0x04) = 0 #TBL --> bootblock locking = 1
* bit 2 (0x04) = 1 #TBL --> bootblock locking = 0
* bit 3 (0x08) = 0 #WP --> block locking = 1
* bit 3 (0x08) = 1 #WP --> block locking = 0
*
* To enable full block locking, you would do:
* val &= ~ ((1 << 2) | (1 << 3));
*/
val |= (1 << 2) | (1 << 3);
OUTL(val, gpiobar + ICH7_GPIO_LVL2);
return 0;
}
/**
* Suited for:
* - BioStar P4M80-M4: Intel P4 + VIA P4M800 + VT8237
* - GIGABYTE GA-7VT600: AMD K7 + VIA KT600 + VT8237
*/
static int board_biostar_p4m80_m4(const char *name)
{
/* enter IT87xx conf mode */
OUTB(0x87, 0x2e);
OUTB(0x01, 0x2e);
OUTB(0x55, 0x2e);
OUTB(0x55, 0x2e);
/* select right flash chip */
wbsio_mask(0x2e, 0x22, 0x80, 0x80);
/* bit 3: flash chip write enable
* bit 7: map flash chip at 1MB-128K (why though? ignoring this.)
*/
wbsio_mask(0x2e, 0x24, 0x04, 0x04);
/* exit IT87xx conf mode */
wbsio_write(0x2, 0x2e, 0x2);
return 0;
}
/**
* Winbond W83697HF Super I/O + VIA VT8235 southbridge
*
* Suited for:
* - MSI KT4V and KT4V-L: AMD K7 + VIA KT400 + VT8235
* - MSI KT3 Ultra2: AMD K7 + VIA KT333 + VT8235
*/
static int board_msi_kt4v(const char *name)
{
struct pci_dev *dev;
uint8_t val;
uint32_t val2;
uint16_t port;
dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
if (!dev) {
fprintf(stderr, "\nERROR: VT823x ISA bridge not found.\n");
return -1;
}
val = pci_read_byte(dev, 0x59);
val &= 0x0c;
pci_write_byte(dev, 0x59, val);
/* We need the I/O Base Address for this board's flash enable. */
port = pci_read_word(dev, 0x88) & 0xff80;
/* Starting at 'I/O Base + 0x4c' is the GPO Port Output Value.
* We must assert GPO12 for our enable, which is in 0x4d.
*/
val2 = INB(port + 0x4d);
val2 |= 0x10;
OUTB(val2, port + 0x4d);
/* Raise ROM MEMW# line on Winbond W83697 Super I/O. */
w836xx_ext_enter(0x2e);
if (!(wbsio_read(0x2e, 0x24) & 0x02)) { /* Flash ROM enabled? */
/* Enable MEMW# and set ROM size select to max. (4M). */
wbsio_mask(0x2e, 0x24, 0x28, 0x28);
}
w836xx_ext_leave(0x2e);
return 0;
}
/**
* We use 2 sets of IDs here, you're free to choose which is which. This
* is to provide a very high degree of certainty when matching a board on
* the basis of subsystem/card IDs. As not every vendor handles
* subsystem/card IDs in a sane manner.
*
* Keep the second set NULLed if it should be ignored.
*
* Keep the subsystem IDs NULLed if they don't identify the board fully.
*/
struct board_pciid_enable {
/* Any device, but make it sensible, like the ISA bridge. */
uint16_t first_vendor;
uint16_t first_device;
uint16_t first_card_vendor;
uint16_t first_card_device;
/* Any device, but make it sensible, like
* the host bridge. May be NULL.
*/
uint16_t second_vendor;
uint16_t second_device;
uint16_t second_card_vendor;
uint16_t second_card_device;
/* The vendor / part name from the coreboot table. */
const char *lb_vendor;
const char *lb_part;
const char *name;
int (*enable) (const char *name);
};
struct board_pciid_enable board_pciid_enables[] = {
{
.first_vendor = 0x1106,
.first_device = 0x0571,
.first_card_vendor = 0x1462,
.first_card_device = 0x7120,
.second_vendor = 0x0000,
.second_device = 0x0000,
.second_card_vendor = 0x0000,
.second_card_device = 0x0000,
.lb_vendor = "msi",
.lb_part = "kt4v",
.name = "MSI KT4V",
.enable = board_msi_kt4v,
},
{
.first_vendor = 0x8086,
.first_device = 0x1a30,
.first_card_vendor = 0x1043,
.first_card_device = 0x8070,
.second_vendor = 0x8086,
.second_device = 0x244b,
.second_card_vendor = 0x1043,
.second_card_device = 0x8028,
.lb_vendor = NULL,
.lb_part = NULL,
.name = "ASUS P4B266",
.enable = ich2_gpio22_raise,
},
{
.first_vendor = 0x10de,
.first_device = 0x0360,
.first_card_vendor = 0x0000,
.first_card_device = 0x0000,
.second_vendor = 0x0000,
.second_device = 0x0000,
.second_card_vendor = 0x0000,
.second_card_device = 0x0000,
.lb_vendor = "gigabyte",
.lb_part = "m57sli",
.name = "GIGABYTE GA-M57SLI-S4",
.enable = it87xx_probe_spi_flash,
},
{
.first_vendor = 0x10de,
.first_device = 0x03e0,
.first_card_vendor = 0x0000,
.first_card_device = 0x0000,
.second_vendor = 0x0000,
.second_device = 0x0000,
.second_card_vendor = 0x0000,
.second_card_device = 0x0000,
.lb_vendor = "gigabyte",
.lb_part = "m61p",
.name = "GIGABYTE GA-M61P-S3",
.enable = it87xx_probe_spi_flash,
},
{
.first_vendor = 0x1002,
.first_device = 0x4398,
.first_card_vendor = 0x1458,
.first_card_device = 0x5004,
.second_vendor = 0x1002,
.second_device = 0x4385,
.second_card_vendor = 0x1458,
.second_card_device = 0x4385,
.lb_vendor = NULL,
.lb_part = NULL,
.name = "GIGABYTE GA-MA78G-DS3H",
.enable = it87xx_probe_spi_flash,
},
{
.first_vendor = 0x1039,
.first_device = 0x0761,
.first_card_vendor = 0x0000,
.first_card_device = 0x0000,
.second_vendor = 0x0000,
.second_device = 0x0000,
.second_card_vendor = 0x0000,
.second_card_device = 0x0000,
.lb_vendor = "gigabyte",
.lb_part = "2761gxdk",
.name = "GIGABYTE GA-2761GXDK",
.enable = it87xx_probe_spi_flash,
},
{
.first_vendor = 0x1022,
.first_device = 0x7468,
.first_card_vendor = 0x0000,
.first_card_device = 0x0000,
.second_vendor = 0x0000,
.second_device = 0x0000,
.second_card_vendor = 0x0000,
.second_card_device = 0x0000,
.lb_vendor = "iwill",
.lb_part = "dk8_htx",
.name = "IWILL DK8-HTX",
.enable = w83627hf_gpio24_raise_2e,
},
{
.first_vendor = 0x10de,
.first_device = 0x005e,
.first_card_vendor = 0x0000,
.first_card_device = 0x0000,
.second_vendor = 0x0000,
.second_device = 0x0000,
.second_card_vendor = 0x0000,
.second_card_device = 0x0000,
.lb_vendor = "msi",
.lb_part = "k8n-neo3",
.name = "MSI K8N Neo3",
.enable = w83627thf_gpio4_4_raise_4e,
},
{
.first_vendor = 0x1022,
.first_device = 0x746B,
.first_card_vendor = 0x1022,
.first_card_device = 0x36C0,
.second_vendor = 0x0000,
.second_device = 0x0000,
.second_card_vendor = 0x0000,
.second_card_device = 0x0000,
.lb_vendor = "AGAMI",
.lb_part = "ARUMA",
.name = "agami Aruma",
.enable = w83627hf_gpio24_raise_2e,
},
{
.first_vendor = 0x1106,
.first_device = 0x3177,
.first_card_vendor = 0x1106,
.first_card_device = 0xAA01,
.second_vendor = 0x1106,
.second_device = 0x3123,
.second_card_vendor = 0x1106,
.second_card_device = 0xAA01,
.lb_vendor = NULL,
.lb_part = NULL,
.name = "VIA EPIA M/MII/...",
.enable = board_via_epia_m,
},
{
.first_vendor = 0x1106,
.first_device = 0x3177,
.first_card_vendor = 0x1043,
.first_card_device = 0x80A1,
.second_vendor = 0x1106,
.second_device = 0x3205,
.second_card_vendor = 0x1043,
.second_card_device = 0x8118,
.lb_vendor = NULL,
.lb_part = NULL,
.name = "ASUS A7V8-MX SE",
.enable = board_asus_a7v8x_mx,
},
{
.first_vendor = 0x1106,
.first_device = 0x3227,
.first_card_vendor = 0x1106,
.first_card_device = 0xAA01,
.second_vendor = 0x1106,
.second_device = 0x0259,
.second_card_vendor = 0x1106,
.second_card_device = 0xAA01,
.lb_vendor = NULL,
.lb_part = NULL,
.name = "VIA EPIA SP",
.enable = board_via_epia_sp,
},
{
.first_vendor = 0x1106,
.first_device = 0x0314,
.first_card_vendor = 0x1106,
.first_card_device = 0xaa08,
.second_vendor = 0x1106,
.second_device = 0x3227,
.second_card_vendor = 0x1106,
.second_card_device = 0xAA08,
.lb_vendor = NULL,
.lb_part = NULL,
.name = "VIA EPIA-CN",
.enable = board_via_epia_sp,
},
{
.first_vendor = 0x8086,
.first_device = 0x1076,
.first_card_vendor = 0x8086,
.first_card_device = 0x1176,
.second_vendor = 0x1106,
.second_device = 0x3059,
.second_card_vendor = 0x10f1,
.second_card_device = 0x2498,
.lb_vendor = NULL,
.lb_part = NULL,
.name = "Tyan Tomcat K7M",
.enable = board_asus_a7v8x_mx,
},
{
.first_vendor = 0x10B9,
.first_device = 0x1541,
.first_card_vendor = 0x0000,
.first_card_device = 0x0000,
.second_vendor = 0x10B9,
.second_device = 0x1533,
.second_card_vendor = 0x0000,
.second_card_device = 0x0000,
.lb_vendor = "asus",
.lb_part = "p5a",
.name = "ASUS P5A",
.enable = board_asus_p5a,
},
{
.first_vendor = 0x1166,
.first_device = 0x0205,
.first_card_vendor = 0x1014,
.first_card_device = 0x0347,
.second_vendor = 0x0000,
.second_device = 0x0000,
.second_card_vendor = 0x0000,
.second_card_device = 0x0000,
.lb_vendor = "ibm",
.lb_part = "x3455",
.name = "IBM x3455",
.enable = board_ibm_x3455,
},
{
.first_vendor = 0x8086,
.first_device = 0x7110,
.first_card_vendor = 0x0000,
.first_card_device = 0x0000,
.second_vendor = 0x8086,
.second_device = 0x7190,
.second_card_vendor = 0x0000,
.second_card_device = 0x0000,
.lb_vendor = "epox",
.lb_part = "ep-bx3",
.name = "EPoX EP-BX3",
.enable = board_epox_ep_bx3,
},
{
.first_vendor = 0x8086,
.first_device = 0x1130,
.first_card_vendor = 0x0000,
.first_card_device = 0x0000,
.second_vendor = 0x105a,
.second_device = 0x0d30,
.second_card_vendor = 0x105a,
.second_card_device = 0x4d33,
.lb_vendor = "acorp",
.lb_part = "6a815epd",
.name = "Acorp 6A815EPD",
.enable = board_acorp_6a815epd,
},
{
.first_vendor = 0x1022,
.first_device = 0x2090,
.first_card_vendor = 0x0000,
.first_card_device = 0x0000,
.second_vendor = 0x1022,
.second_device = 0x2080,
.second_card_vendor = 0x0000,
.second_card_device = 0x0000,
.lb_vendor = "artecgroup",
.lb_part = "dbe61",
.name = "Artec Group DBE61",
.enable = board_artecgroup_dbe6x,
},
{
.first_vendor = 0x1022,
.first_device = 0x2090,
.first_card_vendor = 0x0000,
.first_card_device = 0x0000,
.second_vendor = 0x1022,
.second_device = 0x2080,
.second_card_vendor = 0x0000,
.second_card_device = 0x0000,
.lb_vendor = "artecgroup",
.lb_part = "dbe62",
.name = "Artec Group DBE62",
.enable = board_artecgroup_dbe6x,
},
/* Note: There are >= 2 version of the Kontron 986LCD-M/mITX! */
{
.first_vendor = 0x8086,
.first_device = 0x27b8,
.first_card_vendor = 0x0000,
.first_card_device = 0x0000,
.second_vendor = 0x0000,
.second_device = 0x0000,
.second_card_vendor = 0x0000,
.second_card_device = 0x0000,
.lb_vendor = "kontron",
.lb_part = "986lcd-m",
.name = "Kontron 986LCD-M",
.enable = board_kontron_986lcd_m,
},
{
.first_vendor = 0x10ec,
.first_device = 0x8168,
.first_card_vendor = 0x10ec,
.first_card_device = 0x8168,
.second_vendor = 0x104c,
.second_device = 0x8023,
.second_card_vendor = 0x104c,
.second_card_device = 0x8019,
.lb_vendor = "kontron",
.lb_part = "986lcd-m",
.name = "Kontron 986LCD-M",
.enable = board_kontron_986lcd_m,
},
{
.first_vendor = 0x1106,
.first_device = 0x3149,
.first_card_vendor = 0x1565,
.first_card_device = 0x3206,
.second_vendor = 0x1106,
.second_device = 0x3344,
.second_card_vendor = 0x1565,
.second_card_device = 0x1202,
.lb_vendor = NULL,
.lb_part = NULL,
.name = "BioStar P4M80-M4",
.enable = board_biostar_p4m80_m4,
},
{
.first_vendor = 0x1106,
.first_device = 0x3227,
.first_card_vendor = 0x1458,
.first_card_device = 0x5001,
.second_vendor = 0x10ec,
.second_device = 0x8139,
.second_card_vendor = 0x1458,
.second_card_device = 0xe000,
.lb_vendor = NULL,
.lb_part = NULL,
.name = "GIGABYTE GA-7VT600",
.enable = board_biostar_p4m80_m4,
},
{
.first_vendor = 0x1106,
.first_device = 0x3149,
.first_card_vendor = 0x1462,
.first_card_device = 0x7094,
.second_vendor = 0x10ec,
.second_device = 0x8167,
.second_card_vendor = 0x1462,
.second_card_device = 0x094c,
.lb_vendor = NULL,
.lb_part = NULL,
.name = "MSI K8T Neo2",
.enable = w83627thf_gpio4_4_raise_2e,
},
{
.first_vendor = 0x1039,
.first_device = 0x5513,
.first_card_vendor = 0x8086,
.first_card_device = 0xd61f,
.second_vendor = 0x1039,
.second_device = 0x6330,
.second_card_vendor = 0x8086,
.second_card_device = 0xd61f,
.lb_vendor = NULL,
.lb_part = NULL,
.name = "Intel Desktop Board D201GLY",
.enable = wbsio_check_for_spi,
},
{
.first_vendor = 0x8086,
.first_device = 0x2658,
.first_card_vendor = 0x1462,
.first_card_device = 0x7046,
.second_vendor = 0x1106,
.second_device = 0x3044,
.second_card_vendor = 0x1462,
.second_card_device = 0x046d,
.lb_vendor = NULL,
.lb_part = NULL,
.name = "MSI MS-7046",
.enable = ich6_gpio19_raise,
},
{
.first_vendor = 0x1166,
.first_device = 0x0223,
.first_card_vendor = 0x103c,
.first_card_device = 0x320d,
.second_vendor = 0x102b,
.second_device = 0x0522,
.second_card_vendor = 0x103c,
.second_card_device = 0x31fa,
.lb_vendor = "hp",
.lb_part = "dl145_g3",
.name = "HP DL145 G3",
.enable = board_hp_dl145_g3_enable,
},
{
.first_vendor = 0,
.first_device = 0,
.first_card_vendor = 0,
.first_card_device = 0,
.second_vendor = 0,
.second_device = 0,
.second_card_vendor = 0,
.second_card_device = 0,
.lb_vendor = NULL,
.lb_part = NULL,
} /* Keep this */
};
void print_supported_boards(void)
{
int i;
printf("\nSupported mainboards (this list is not exhaustive!):\n\n");
for (i = 0; board_pciid_enables[i].name != NULL; i++) {
if (board_pciid_enables[i].lb_vendor != NULL) {
printf("%s (-m %s:%s)\n", board_pciid_enables[i].name,
board_pciid_enables[i].lb_vendor,
board_pciid_enables[i].lb_part);
} else {
printf("%s (autodetected)\n",
board_pciid_enables[i].name);
}
}
printf("\nSee also: http://coreboot.org/Flashrom\n");
}
/**
* Match boards on coreboot table gathered vendor and part name.
* Require main PCI IDs to match too as extra safety.
*/
static struct board_pciid_enable *board_match_coreboot_name(const char *vendor,
const char *part)
{
struct board_pciid_enable *board = board_pciid_enables;
struct board_pciid_enable *partmatch = NULL;
for (; board->name; board++) {
if (vendor && (!board->lb_vendor
|| strcasecmp(board->lb_vendor, vendor)))
continue;
if (!board->lb_part || strcasecmp(board->lb_part, part))
continue;
if (!pci_dev_find(board->first_vendor, board->first_device))
continue;
if (board->second_vendor &&
!pci_dev_find(board->second_vendor, board->second_device))
continue;
if (vendor)
return board;
if (partmatch) {
/* a second entry has a matching part name */
printf("AMBIGUOUS BOARD NAME: %s\n", part);
printf("At least vendors '%s' and '%s' match.\n",
partmatch->lb_vendor, board->lb_vendor);
printf("Please use the full -m vendor:part syntax.\n");
return NULL;
}
partmatch = board;
}
if (partmatch)
return partmatch;
printf("\nUnknown vendor:board from coreboot table or -m option: %s:%s\n\n", vendor, part);
return NULL;
}
/**
* Match boards on PCI IDs and subsystem IDs.
* Second set of IDs can be main only or missing completely.
*/
static struct board_pciid_enable *board_match_pci_card_ids(void)
{
struct board_pciid_enable *board = board_pciid_enables;
for (; board->name; board++) {
if (!board->first_card_vendor || !board->first_card_device)
continue;
if (!pci_card_find(board->first_vendor, board->first_device,
board->first_card_vendor,
board->first_card_device))
continue;
if (board->second_vendor) {
if (board->second_card_vendor) {
if (!pci_card_find(board->second_vendor,
board->second_device,
board->second_card_vendor,
board->second_card_device))
continue;
} else {
if (!pci_dev_find(board->second_vendor,
board->second_device))
continue;
}
}
return board;
}
return NULL;
}
int board_flash_enable(const char *vendor, const char *part)
{
struct board_pciid_enable *board = NULL;
int ret = 0;
if (part)
board = board_match_coreboot_name(vendor, part);
if (!board)
board = board_match_pci_card_ids();
if (board) {
printf("Found board \"%s\", enabling flash write... ",
board->name);
ret = board->enable(board->name);
if (ret)
printf("FAILED!\n");
else
printf("OK.\n");
}
return ret;
}