<page xmlns="http://projectmallard.org/1.0/"
      xmlns:its="http://www.w3.org/2005/11/its"
      type="topic" style="task"
      id="net-manual">

  <info>
    <link type="guide" xref="net-wired"/>
    <link type="guide" xref="net-wireless"/>

    <revision pkgversion="3.4.0" date="2012-02-20" status="final"/>
    <revision pkgversion="3.10" date="2013-11-11" status="review"/>
    <revision pkgversion="3.18" date="2015-09-28" status="final"/>
    <revision pkgversion="3.28" date="2018-03-28" status="review"/>

    <credit type="author">
      <name>Phil Bull</name>
      <email>philbull@gmail.com</email>
    </credit>
    <credit type="editor">
      <name>Michael Hill</name>
      <email>mdhillca@gmail.com</email>
    </credit>

    <desc>You may have to enter network settings if they don’t get assigned
    automatically.</desc>
    <include href="legal.xml" xmlns="http://www.w3.org/2001/XInclude"/>
  </info>

  <title>Manually set network settings</title>

  <p>If your network doesn’t automatically assign network settings to your
  computer, you may have to manually enter the settings yourself. This topic
  assumes that you already know the correct settings to use. If not, you may
  need to ask your network administrator or look at the settings of your router
  or network switch.</p>

  <steps>
    <title>To manually set your network settings:</title>
    <item>
      <p>Open the <gui xref="shell-introduction#activities">Activities</gui>
      overview and start typing <gui>Settings</gui>.</p>
    </item>
    <item>
      <p>Click on <gui>Settings</gui>.</p>
    </item>
    <item>
      <p>In the left pane, select the network connection that you want to set
      up manually. If you plug in to the network with a cable, click
      <gui>Network</gui>. Otherwise click <gui>Wi-Fi</gui>.</p>
      <p>Make sure that your wireless card is turned on or a network cable is
      plugged in.</p>
    </item>
    <item>      
      <p>Click the
      <media its:translate="no" type="image"
             src="figures/emblem-system.png"><span
                                                 its:translate="yes">settings</span></media>
      button.</p>
      <note>
        <p>For a <gui>Wi-Fi</gui> connection, the 
        <media its:translate="no" type="image" src="figures/emblem-system.png"><span its:translate="yes">settings</span></media>
        button will be located next to the active network.</p>
      </note>
    </item>
    <item>
      <p>Click on <gui>IPv4</gui> or <gui>IPv6</gui> in the left pane
      and change the <gui>Addresses</gui> to <em>Manual</em>.</p>
    </item>
    <item>
      <p>Type in the <gui xref="net-what-is-ip-address">IP Address</gui> and
      <gui>Gateway</gui>, as well as the appropriate <gui>Netmask</gui>.</p>
    </item>
    <item>
      <p>In the <gui>DNS</gui> section, switch <gui>Automatic</gui> to
      <gui>OFF</gui>. Enter the IP address of a DNS server you want to use.
      Enter additional DNS server addresses using the <gui>+</gui> button.</p>
    </item>
    <item>
      <p>In the <gui>Routes</gui> section, switch <gui>Automatic</gui> to
      <gui>OFF</gui>. Enter the <gui>Address</gui>, <gui>Netmask</gui>,
      <gui>Gateway</gui> and <gui>Metric</gui> for a route you want to use.
      Enter additional routes using the <gui>+</gui> button.</p>
    </item>
    <item>
      <p>Click <gui>Apply</gui>. If you are not connected to the network, click
      the system status area on the top bar and connect. Test the network
      settings by trying to visit a website or look at shared files on the
      network, for example.</p>
    </item>
  </steps>

</page>