26.04.2022
==========
hcxpsktool: fixed stdout bug
release v6.2.7
22.04.2022
==========
release v6.2.6
still supporting OpenSSL 1.1
09.04.2022
==========
hcxpsktool: added new option
--alticeoptimum : include weak Altice/Optimum candidates (MyAltice)
01.12.2021
==========
release v6.2.5
still supporting OpenSSL 1.1
23.10.2021
==========
added generic hcxtools.1 man page
22.10.2021
==========
removed manpages, because they are only a duplicate of the help menu
moved installation path from /usr/local/bin to /usr/bin
14.10.2021
==========
hcxpsktool: renamed option --askeyarris to --spectrum
25.09.2021
==========
hcxhashtool: added new option to filter by replay count not checked (nonce-error-corrections mandatory)
--rc-not : filter EAPOL pairs by replaycount status not checked
17.09.2021
==========
hcxhashtool: renamed option --notauthorized to --challenge
added additional information about filtered MESSAGE PAIRS for this options
14.09.2021
==========
release v6.2.4
This is the last version, supporting OpenSSL 1.1
Next version 6.3.0 will need OpenSSL 3.0.0
01.09.2021
==========
hcxpcapngtool: added new option to retrieve information about the ACCESS POINT
As initial start, if transmitted, MAC_AP, MANUFACTURER, MODELNAME, SERIALNUMBER and DEVICENAME are stored (delimited by tab).
-D <file> : output device information list
format MAC <tab> MANUFACTURER <tab> MODELNAME <tab> SERIALNUMBER <tab> DEVICENAME <tab> UUID E
28.08.2021
==========
wlancap2wpasec: added upload progress information
whoismac: added download progress information
hcxhashtool: added download progress information
hcxhashtool: added more info options (https://github.com/ZerBea/hcxtools/issues/195)
--info=<file> : output detailed information about content of hash file
not in combination with --vendor, --vendor-ap or --vendor-client
--info=stdout : stdout output detailed information about content of hash file
not in combination with --vendor, --vendor-ap or --vendor-client
--info-vendor=<file> : output detailed information about ACCESS POINT and CLIENT VENDORs
not in combination with --vendor, --vendor-ap or --vendor-client
--info-vendor-ap=<file> : output detailed information about ACCESS POINT VENDORs
not in combination with --vendor, --vendor-ap or --vendor-client
--info-vendor-client=<file> : output detailed information about ACCESS POINT VENDORs
not in combination with --vendor, --vendor-ap or --vendor-client
--info-vendor=stdout : stdout output detailed information about ACCESS POINT and CLIENT VENDORs
not in combination with --vendor, --vendor-ap or --vendor-client
--info-vendor-ap=stdout : stdout output detailed information about ACCESS POINT VENDORs
not in combination with --vendor, --vendor-ap or --vendor-client
--info-vendor-client=stdout : stdout output detailed information about ACCESS POINT VENDORs
not in combination with --vendor, --vendor-ap or --vendor-client
27.08.2021
==========
hcxhashtool: VENDOR search is not longer case sensitive (https://github.com/ZerBea/hcxtools/issues/195)
hcxhashtool: improved filtering by VENDOR
--vendor=<VENDOR> : filter AP or CLIENT by (part of) VENDOR name
--vendor-ap=<VENDOR> : filter AP by (part of) VENDOR name
--vendor-client=<VENDOR> : filter CLIENT by (part of) VENDOR name
25.08.2021
==========
hcxpcapngtool: advanced handling of BEACON and PROBERESPOSNE frames
distinguish between SSID set, SSID unset and SSID zeroed
20.06.2021
==========
Makefile: added compiler flag to disable zlib support
04.06.2021
==========
hcxpcapngtool: improved CSV output:
--csv=<file> : output ACCESS POINT information in CSV format
delimiter: tabulator (0x08)
columns:
YYYY-MM-DD HH:MM:SS MAC_AP ESSID ENC_TYPE CIPHER AKM COUNTRY_INFO CHANNEL RSSI GPS(DM.m) GPS(D.d) GPSFIX
to convert it to other formats, use bash tools or scripting languages
GPS FIX:
0 = fix not available or invalid
1 = fix valid (GPS SPS mode)
2 = fix valid (differential GPS SPS Mode)
3 = not supported
4 = not supported
5 = not supported
6 = fix valid (Dead Reckoning Mode)
28.05.2021
==========
hcxpsktool: added new option to use an exclude ESSID combinations
--noessidcombination: exclude ESSID combinations
17.05.2021
==========
release v 6.2.0
get ready for gcc 11.1.0
fixed CVE-2021-32286
12.05.2021
==========
hcxpsktool: added new option to print only candidates based on ACCESS POINT MAC
--maconly : print only candidates based on ACCESS POINT MAC
17.03.2021
==========
hcxhashtool: added new option to use an exclude MAC filter list
--mac-skiplist=<file> : exclude MAC from file
format: 001122334455, 00:11:22:33:44:55, 00-11-22-33-44-55 (hex)
09.03.2021
==========
release v 6.1.5
get ready for OpenSSL 3.0
28.02.2021
==========
added new tool to calculate a PMK and verify a 22000 hashline
hcxpmktool 6.1.5-72-g585fe37 (C) 2021 ZeroBeat
usage : hcxpmktool <options>
short options:
-i <hash line> : input hashcat hash line (-m 22000)
-e <ESSID> : input ESSID
default: use ESSID from hash line
-p <PSK> : input Pre Shared Key
-m <PMK> : input Plain Master KEY
long options:
--help : show this help
--version : show version
09.02.2021
==========
started to prepare to use openssl 3.0
Many structures have been made opaque in OpenSSL 3.0 since OpenSSL 1.0.2
https://wiki.openssl.org/index.php/OpenSSL_3.0
it is recommended to upgrade to at least OpenSSL 1.1
04.02.2021
==========
hcxpcapngtool: fixed handling of BE pcapng files on BE systems
14.01.2021
==========
release v 6.1.5
02.01.2021
==========
hcxhashtool: added new option --mac-list
--mac-list=<file> : filter by MAC file
: format: 001122334455, 00:11:22:33:44:55, 00-11-22-33-44-55 (hex)
31.12.2020
==========
hcxpcapngtool: added new option --csv
--csv=<file> : output ACCESS POINT information in CSV format
delimiter: tabulator (0x08)
columns:
YYYY-MM-DD HH:MM:SS MAC_AP ESSID ENC_TYPE CIPHER AKM COUNTRY_INFO CHANNEL RSSI LATITUDE QUADRANT LONGITUDE QUADRANT
10.12.2020
==========
Makefile: make use of pkg-config
02.12.2020
==========
release v 6.1.4
21.11.2020
==========
hcxhashtool: added new option to filter by ESSID list
--essid-list=<file> : filter by ESSID file
hcxpcapngtool: show openSSL version in status
27.10.2020
==========
hcxeiutool: new tool to prepare -E -I -U output of hcxpcapngtool for use by hashcat + rule
$ hcxeiutool -h
hcxeiutool 6.1.3-37-gbdc5a67 (C) 2020 ZeroBeat
usage:
hcxeiutool <options>
options:
-i <file> : input wordlist
-d <file> : output digit wordlist
-x <file> : output xdigit wordlist
-c <file> : output character wordlist (A-Za-z - other characters removed)
-s <file> : output character wordlist (A-Za-z - other characters replaced by 0x0d)
-h : show this help
-v : show version
--help : show this help
--version : show version
example:
$ hcxdumptool -i <interface> -o dump.pcapng --enable_status=31
$ hcxpcapngtool -o test.22000 -E elist dump.pcapng
$ hcxeiutool -i elist -d digitlist -x xdigitlist -c charlist -s sclist
$ cat elist digitlist xdigitlist charlist sclist > wordlisttmp
$ hashcat --stdout -r <rule> charlist >> wordlisttmp
$ hashcat --stdout -r <rule> sclist >> wordlisttmp
$ cat wordlisttmp | sort | uniq > wordlist
$ hashcat -m 22000 dump.pcapng wordlist
15.10.2020
==========
hcxpcapngtool: added handling of BSD loopback header (DLT_NULL)
13.10.2020
==========
hcxpcapngtool: added new option --tacacs-plus
--tacacs-plus=<file> : output TACACS+ (hashcat -m 16100, john tacacs-plus)
hcxpcapngtool: merged options --eapleap and --eapmschapv2 to --eapleap due to same hash format
--eapleap=<file> : output EAP LEAP and MSCHAPV2 CHALLENGE (hashcat -m 5500, john netntlm)
--prefix=<file> : convert everything to lists using this prefix (overrides single options):
-o <file.22000> : output PMKID/EAPOL hash file
-E <file.essid> : output wordlist (autohex enabled on non ASCII characters) to use as input wordlist for cracker
-I <file.identitiy> : output unsorted identity list to use as input wordlist for cracker
-U <file.username> : output unsorted username list to use as input wordlist for cracker
--eapmd5=<file.4800> : output EAP MD5 CHALLENGE (hashcat -m 4800)
--eapleap=<file.5500> : output EAP LEAP and MSCHAPV2 CHALLENGE (hashcat -m 5500, john netntlm)
--nmea=<file.nmea> : output GPS data in NMEA format
12.10.2020
==========
hcxpcapngtool: added new option --eapmschapv2
--eapmschapv2=<file> : output EAP MSCHAPV2 CHALLENGE (hashcat -m 5500, john netntlm)
11.10.2020
==========
hcxpsktool: added new option --ee
--ee : include weak EE BrightBox candidates
09.10.2020
==========
release v 6.1.3
05.10.2020
==========
refactored weak candidate list based on wpa-sec analysis
28.09.2020
==========
removed deprecated wlanpmk2hcx
18.09.2020
==========
hcxpcapngtool: added new option -R
-R <file> : output wordlist (autohex enabled on non ASCII characters) to use as input wordlist for cracker
retrieved from PROBEREQUEST frames only
17.09.2020
==========
release v 6.1.2
10.09.2020
==========
removed deprecated wlanhcx2ssid, wlanhcxinfo aand wlanhcxcat
07.09.2020
==========
removed deprecated wlanhcx2john, wlanjohn2hcx and wlanwkp2hcx
04.09.2020
==========
removed deprecated hcxpcaptool - use hcxpcapngtool instead
19.08.2020
==========
hcxpsktool: added new option:
--egn : include Bulgarian EGN
06.08.2020
==========
release v 6.1.1
improved warnings
fixed handling of short options
added several new weak candidates
29.06.2020
==========
release v 6.1.0
27.07.2020
==========
hcxhashtool: added new options to get full benefit aof reuse of PBKDF2
--hcx-min=<digit> : disregard hashes with occurrence lower than hcx-min/ESSID
--hcx-max=<digit> : disregard hashes with occurrence higher than hcx-min/ESSID
19.06.2020
==========
hcxpsktool: splitted NETGEAR and ASKEY/ARRIS weak candidate list
--netgear : include weak NETGEAR / ORBI candidates
--askeyarris : include weak MySpectrumWiFI / SpectrumSetup / MyCharterWiFI candidates
15.06.2020
==========
release v 6.0.3
27.05.2020
==========
hcxpcapngtool: added counter for AKM defined EAPOL messages
ASSOCIATIONREQUEST (SAE SHA256)..........: 1
...
EAPOL M1 messages........................: 44361
EAPOL M1 messages (AKM defined)..........: 2
EAPOL M2 messages........................: 1631
EAPOL M2 messages (AKM defined)..........: 3
20.05.2020
==========
hcxpcapngtool: print warning if out of sequence time stamps detected
hcxdumptool < 6.0.5 was affected, too and hcxpcapngtool will show you this warning
hcxdumptool 6.0.6 is fixed
improved conversion speed
18.05.2020
==========
hcxpcapngtool: handle wrong time stamps in pwnagotchi cap files on --nonce-error-corrections > 0
In that case we can't rely on EAPOL TIME OUT
01.05.2020
==========
hcxpcapngtool: handle vendor defined action frames (eg: AWDL)
06.04.2020
==========
release v 6.0.2
hcxpcapngtool: improved NC speed and more bug fixes
03.04.2020
==========
release v 6.0.1
hcxpcapngtool: improved NC speed and some bug fixes
removed deprecated wlanhc2hcx
removed deprecated wlancow2hcxpmk
02.04.2020
==========
release v 6.0.0
30.03.2020
==========
hcxhash2cap: added new option to convert PMKID&EAPOL (hashcat -m 22000) to cap file
--pmkid-eapol=<file> : input PMKID EAPOL combi hash file
14.03.2020
==========
moved to v 6.0.0
complete rewrite from scratch
full support of new hashline PMKID+EAPOL (hashcat -m 22000 and JtR)
https://github.com/hashcat/hashcat/issues/1816
https://github.com/magnumripper/JohnTheRipper/issues/4183
support EAP-LEAP
support EAP-MD5
several bug fixes
improved summary
improved detection of cipher and AKM suites
improved detection of malformed frames (caused by device, driver or monitor mode)
read more about monitor mode caused bit errors here:
http://www.ict-optimix.eu/images/a/ad/WiFiBitError.pdf
In monitor mode the adapter does not check to see if the cyclic redundancy check (CRC)
values are correct for packets captured, so some captured packets may be corrupted.
hcxpsktool: added new weak candidates
hcxpcapngtool: new tool
$ hcxpcapngtool -h
hcxpcapngtool 6.0.0 (C) 2020 ZeroBeat
usage:
hcxpcapngtool <options>
hcxpcapngtool <options> input.pcapng
hcxpcapngtool <options> *.pcapng
hcxpcapngtool <options> *.pcap
hcxpcapngtool <options> *.cap
hcxpcapngtool <options> *.*
short options:
-o <file> : output PMKID/EAPOL hash file
hashcat -m 22000/22001 and JtR wpapsk-opencl/wpapsk-pmk-opencl
-E <file> : output wordlist (autohex enabled on non ASCII characters) to use as input wordlist for cracker
-I <file> : output unsorted identity list to use as input wordlist for cracker
-U <file> : output unsorted username list to use as input wordlist for cracker
-h : show this help
-v : show version
long options:
--all : convert all possible hashes instead of only the best one
that can lead to much overhead hashes
use hcxhashtool to filter hashes
need hashcat --nonce-error-corrections >= 8
--eapoltimeout=<digit> : set EAPOL TIMEOUT (milliseconds)
: default: 5000 ms
--nonce-error-corrections=<digit> : set nonce error correction
warning: values > 0 can lead to uncrackable handshakes
: default: 0
--ignore-ie : do not use CIPHER and AKM information
this will convert all frames regadless of
CIPHER and/OR AKM information,
and can lead to uncrackable hashes
--max-essids=<digit> : maximum allowed ESSIDs
default: 1 ESSID
disregard ESSID changes and take ESSID with highest ranking
--eapmd5=<file> : output EAP MD5 CHALLENGE (hashcat -m 4800)
--eapmd5-john=<file> : output EAP MD5 CHALLENGE (john chap)
--eapleap=<file> : output EAP LEAP CHALLENGE (hashcat -m 5500, john netntlm)
--nmea=<file> : output GPS data in NMEA format
format: NMEA 0183 $GPGGA, $GPRMC, $GPWPL
to convert it to gpx, use GPSBabel:
gpsbabel -i nmea -f hcxdumptool.nmea -o gpx -F file.gpx
to display the track, open file.gpx with viking
--log=<file> : output logfile
--raw-out=<file> : output frames in HEX ASCII
: format: TIMESTAMP*LINKTYPE*FRAME*CHECKSUM
--raw-in=<file> : input frames in HEX ASCII
: format: TIMESTAMP*LINKTYPE*FRAME*CHECKSUM
--pmkid=<file> : output deprecated PMKID file (delimter *)
--hccapx=<file> : output deprecated hccapx v4 file
--hccap=<file> : output deprecated hccap file
--john=<file> : output deprecated PMKID/EAPOL (JtR wpapsk-opencl/wpapsk-pmk-opencl)
--prefix=<file> : convert everything to lists using this prefix (overrides single options):
-o <file.22000> : output PMKID/EAPOL hash file
-E <file.essid> : output wordlist (autohex enabled on non ASCII characters) to use as input wordlist for cracker
-I <file.identitiy> : output unsorted identity list to use as input wordlist for cracker
-U <file.username> : output unsorted username list to use as input wordlist for cracker
--eapmd5=<file.4800> : output EAP MD5 CHALLENGE (hashcat -m 4800)
--eapleap=<file.5500> : output EAP LEAP CHALLENGE (hashcat -m 5500, john netntlm)
--nmea=<file.nmea> : output GPS data in NMEA format
--help : show this help
--version : show version
bitmask for message pair field:
0: MP info (https://hashcat.net/wiki/doku.php?id=hccapx)
1: MP info (https://hashcat.net/wiki/doku.php?id=hccapx)
2: MP info (https://hashcat.net/wiki/doku.php?id=hccapx)
3: x (unused)
4: ap-less attack (set to 1) - no nonce-error-corrections necessary
5: LE router detected (set to 1) - nonce-error-corrections only for LE necessary
6: BE router detected (set to 1) - nonce-error-corrections only for BE necessary
7: not replaycount checked (set to 1) - replaycount not checked, nonce-error-corrections definitely necessary
Do not edit, merge or convert pcapng files! This will remove optional comment fields!
Detection of bit errors does not work on cleaned dump files!
Do not use hcxpcapngtool in combination with third party cap/pcap/pcapng cleaning tools (except: tshark and/or Wireshark)!
It is much better to run gzip to compress the files. Wireshark, tshark and hcxpcapngtool will understand this.
hcxhashtool: new tool
$ hcxhashtool -h
hcxhashtool 6.0.0 (C) 2020 ZeroBeat
usage:
hcxhashtool <options>
options:
-i <file> : input PMKID/EAPOL hash file
-o <file> : output PMKID/EAPOL hash file
-E <file> : output ESSID list (autohex enabled)
-d : download http://standards-oui.ieee.org/oui.txt
: and save to ~/.hcxtools/oui.txt
: internet connection required
-h : show this help
-v : show version
--essid-group : convert to ESSID groups in working directory
full advantage of reuse of PBKDF2
not on old hash formats
--oui-group : convert to OUI groups in working directory
not on old hash formats
--mac-group-ap : convert APs to MAC groups in working directory
not on old hash formats
--mac-group-client : convert CLIENTs to MAC groups in working directory
not on old hash formats
--type : filter by hash type
: default PMKID (1) and EAPOL (2)
--essid-len : filter by ESSID length
: default ESSID length: 0...32
--essid-min : filter by ESSID minimum length
: default ESSID minimum length: 0
--essid-max : filter by ESSID maximum length
: default ESSID maximum length: 32
--essid=<ESSID> : filter by ESSID
--essid-part=<part of ESSID> : filter by part of ESSID
--mac-ap=<MAC> : filter AP by MAC
: format: 001122334455, 00:11:22:33:44:55, 00-11-22-33-44-55 (hex)
--mac-client=<MAC> : filter CLIENT by MAC
: format: 001122334455, 00:11:22:33:44:55, 00-11-22-33-44-55 (hex)
--oui-ap=<OUI> : filter AP by OUI
: format: 001122, 00:11:22, 00-11-22 (hex)
--oui-client=<OUI> : filter CLIENT by OUI
: format: 001122, 00:11:22, 00-11-22 (hex)
--vendor=<VENDOR> : filter by (part of) VENDOR name
--authorized : filter EAPOL pairs by status authorized
--notauthorized : filter EAPOL pairs by status not authorized
--rc : filter EAPOL pairs by replaycount status checked
--apless : filter EAPOL pairs by status M2 requested from client
--info=<file> : output detailed information about content of hash file
--info=stdout : stdout output detailed information about content of hash file
--vendorlist : stdout output VENDOR list sorted by OUI
--psk=<PSK> : pre-shared key to test
: due to PBKDF2 calculation this is a very slow process
: no nonce error corrections
--pmk=<PMK> : plain master key to test
: no nonce error corrections
--hccapx=<file> : output to deprecated hccapx file
--hccap=<file> : output to ancient hccap file
--hccap-single : output to ancient hccap single files (MAC + count)
--john=<file> : output to deprecated john file
--help : show this help
--version : show version
| deprecated | obsolete when hashcat and JtR moved to new PMKID/EAPOL hash line - no longer under maintenance |
| -------------- | -------------------------------------------------------------------------------------------------------------------- |
| whoismac | Show vendor information and/or download oui reference list |
| hcxmactool | Various MAC based filter operations on HCCAPX and PMKID files - convert hccapx and/or PMKID to new hashline format |
| hcxpcaptool | Shows info of pcap/pcapng file and convert it to other hashformats accepted by hashcat and John the Ripper |
| hcxpmkidtool | CPU based tools to verfiy a PMKID |
| hcxessidtool | Various ESSID based filter operations on HCCAPX and PMKID files |
| hcxhashcattool | Convert old hashcat (<= 5.1.0) separate potfile (2500 and/or 16800) to new potfile format |
| wlanhc2hcx | Converts hccap to hccapx |
| wlanwkp2hcx | Converts wpk (ELMCOMSOFT EWSA projectfile) to hccapx |
| wlanhcx2ssid | Strips BSSID, ESSID, OUI |
| wlanhcxinfo | Shows detailed info from contents of hccapxfile |
| wlanhcxcat | Simple password recovery tool for WPA/WPA2/WPA2 SHA256 AES-128-CMAC (hash-modes 2500, 2501) |
| wlanpmk2hcx | Converts plainmasterkey and ESSID for use with hashcat hash-mode 12000 or john PBKDF2-HMAC-SHA1 |
| wlanjohn2hcx | Converts john wpapsk hashfiles for use with hashcat hash-modes 2500, 2501 |
| wlancow2hcxpmk | Converts pre-computed cowpatty hashfiles for use with hashcat hash-mode 2501 |
| wlanhcx2john | Converts hccapx to format expected by John the Ripper |
05.01.2020
==========
hcxhashtool: added new options
-d : download http://standards-oui.ieee.org/oui.txt
: and save to ~/.hcxtools/oui.txt
: internet connection required
--info=<file> : output detailed information about content of hash file
--info=stdout : stdout output detailed information about content of hash file
03.01.2020
==========
started to remove deprecated tools
wlanhcxmnc: removed
19.12.2019
==========
hacxhashtool: added new tool initial
this tool will work on new PMKID EAPOL hash line and replace all older hcxtools
when all functions implemented.
19.12.2019
==========
hcxpcapngtool: move -j to --john because format is deprecated and JtR will move to new format, too
https://github.com/hashcat/hashcat/issues/1816#issuecomment-567423392
17.12.2019
==========
hcxpsktool: added support for hashcat 22000 (crossover PMKID - EAPOL hashline)
-c <file> : input PMKID/EAPOL hash file (hashcat -m 22000)
16.12.2019
==========
prepare new tool hcxpcapngtool for hashcat hashmode 22000 (crossover PMKID - EAPOL hashline)
highly experemental
not all features build in
format of hashmode 22000 may change on hashcat and hcxpcapngtool until final release
hcxpcaptool will replaced by hcxpcapngtool if everything is working like expected
only testing purpose to verify hashcat's new hash mode 22000
09.12.2019
==========
hcxpsktool : added new weak candidates
--phome : include PEGATRON HOME candidates
08.12.2019
==========
move to v5.3.0
29.09.2019
==========
hcxpmkidtool: added new tool to verify a PMKID (CPU based)
options:
-p <pmkid> : input PMKID
PMKID:MAC_AP:MAC_STA:ESSID(XDIGIT)
PMKID*MAC_AP*MAC_STA*ESSID(XDIGIT)
-w <file> : input wordlist (8...63 characters)
output: PMK:ESSID (XDIGIT):password
-W <word> : input single word (8...63 characters)
output: PMK:ESSID (XDIGIT):password
-K <pmk> : input single PMK
output: PMK:ESSID (XDIGIT)
format:
-h : show this help
-v : show version
--help : show this help
--version : show version
hcxpmkidtool is designed to verify an existing PSK or and existing PMK.
It is not designed to run big wordlists!
25.09.2019
==========
wlanhashhcx: removed
hcxmactool: added new tool (MAC based counterpart to ESSID based hcxessidtool)
options:
-o <oui> : filter access point by OUI
-n <nic> : filter access point by NIC
-m <mac> : filter access point by MAC
-a <vendor> : filter access point by VENDOR name
-O <oui> : filter client by OUI
-N <nic> : filter client point by NIC
-M <mac> : filter client point by MAC
-A <vendor> : filter client by VENDOR name
-h : show this help
-v : show version
--pmkidin=<file> : input PMKID file 1
--pmkidout=<file> : output PMKID file 1
--hccapxin=<file> : input HCCAPX file
--hccapxout=<file> : output HCCAPX file
--help : show this help
--version : show version
24.09.2019
==========
hcxessidtool: added new options and improved help
--pmkidgroupout=<file> : output ESSID groups from ESSIDs present in PMKID1
--hccapxgroupout=<file>: output ESSID groups from ESSIDs present in HCCAPX1
15.09.2019
==========
hcxpcaptool: added new option and improved help
--ignore-mac : do not check MAC addresses
this will allow to use ESSIDs from frames with damaged broadcast MAC address
14.09.2019
==========
hcxpcaptool : improved detection of damaged ESSIDs
13.09.2019
==========
hcxessidtool: added new options
--essidout=<file> : output ESSID list
--essidmacapout=<file> : output MAC_AP:ESSID list
12.09.2019
==========
removed : wlanhcx2essid (deprecated)
added : hcxessidtool
options:
-e <essid> : filter by ESSID
-E <essid> : filter by part of ESSID
-l <essid> : filter by ESSID length
-h : show this help
-v : show version
--pmkid1=<file> : input PMKID file 1
--pmkid2=<file> : input PMKID file 2
--pmkidout12=<file> : output only lines present in both PMKID file 1 and PMKID file 2
--pmkidout1=<file> : output only lines present in PMKID file 1
--pmkidout2=<file> : output only lines present in PMKID file 2
--pmkidout=<file> : output only ESSID filtered lines present in PMKID file 1
--hccapx1=<file> : input HCCAPX file 1
--hccapx2=<file> : input HCCAPX file 2
--hccapxout12=<file> : output only lines present in both HCCAPX file 1 and HCCAPX file 2
--hccapxout1=<file> : output only lines present in HCCAPX file1
--hccapxout2=<file> : output only lines present in HCCAPX file 2
--hccapxout=<file> : output only ESSID filtered lines present in HCCAPX file 1
--help : show this help
--version : show version
Main purpose is to get full adcantage or reuse of PBKDF2
while merging (only) the same ESSIDs from different hash files
examples:
hcxessidtool --pmkid1=file1.16800 --pmkid2=file2.16800 --pmkidout12=joint.16800
hcxessidtool --pmkid1=file1.16800 -l 10 --pmkidout=filtered.16800
03.09.2019
==========
move to v5.2.2
fixed bug in damaged ESSID handling
01.09.2019
==========
hcxpcaptool: show capture device vendor
28.08.2019
==========
moved to v5.2.1
hcxpsktool : added new weak candidates
hcxdumptool: added additional warnings about handling of pcapng files ( im
imrpoved status out: count zeroed PMKIDs
19.08.2019
==========
move to v5.2.0
11.08.2019
==========
hcxpcaptool: print time of first packet and time of last packet
this will not work on cap files with zeroed time stamps
10.08.2019
==========
hcxpcaptool: removed option --replaycountcheck
added option --ignore-replaycount to allow conversion of not replaycount checked handshakes
if we have no replaycount matching handshake - in that case nc must be used!
Remarks:
total best handshakes and total best PMKIDs can be different to realy written ones:
best handshakes (total)..........: 190 (ap-less: 122)
best PMKIDs (total)..............: 30
summary output file(s):
-----------------------
175 handshake(s) written to /tmp/test.hccapx
message pair M12E2...............: 157
message pair M32E2...............: 16
message pair M34E4...............: 2
29 PMKID(s) written to /tmp/test.16800
That depend on this additional options and the quality of the cap file:
--ignore-fake-frames : do not convert fake frames
--ignore-zeroed-pmks : do not convert frames which use a zeroed plainmasterkey (PMK)
--ignore-replaycount : allow not replaycount checked best handshakes
--time-error-corrections=<digit> : maximum time gap between EAPOL frames - EAPOL TIMEOUT (default: 600s)
--nonce-error-corrections=<digit> : maximum replycount/nonce gap to be converted (default: 8)
example: --nonce-error-corrections=60
convert handshakes up to a possible packetloss of 59 packets
hashcat nonce-error-corrections should be twice as much as hcxpcaptool value
--max-essid-changes=<digit> : allow maximum ESSID changes (default: 1 - no ESSID change is allowed)
09.08.2019
==========
hcxpcaptool: added summary (replaycount check) and print warning if result is not replaycount checked
(in this case nc is necessary)
added warning if an ESSID change is detected.
this can be handled by increase the value of option --max-essid-changes
added new option --replaycountcheck
--replaycountcheck : convert only replaycount checked frames
26.06.2019
==========
hcxpcaptool: added new option --max-essid-changes
--max-essid-changes=<digit> : allow maximum ESSID changes (default: 8)
useful on merged cap files with many ESSID changes for a single mac_ap
or on damaged ESSIDs
23.06.2019
==========
hcxpcaptool: fixed several big endian issues
show information about handshakes and PMKIDs calculated by a zeroed PMK
added new options --ignore-zeroed-pmks and --prefix-out=<file>
--ignore-zeroed-pmks : do not convert frames which use a zeroed plainmasterkey (PMK)
This option is useful to reduce the commandline length if all lists are requested:
--prefix-out=<file> : convert everything to lists using this prefix (overrides single options):
hccapx (-o) file.hccapx
PMKID (-k) file.16800
netntlm (--netntlm-out) file.5500
md5 (--md5-out) file.4800
tacacsplus (--tacacsplus) file.16100
wordlist (-E) file.essidlist
identitylist (-I) file.identitylist
usernamelist (-U) file.userlist
imsilist (-M) file.imsilist
networklist (-network-out) file.networklist
trafficlist (-T) file.networklist
clientlist (-X) file.clientlist
deviceinfolist (-D) file.deviceinfolist
20.06.2019
==========
hcxpcaptool: complete refactoring of pcapng engine
19.06.2019
==========
hcxpcaptool: added new option -D
-D <file> : output unsorted device information list
format = MAC:DEVICEINFO string
16.06.2019
==========
hcxpcaptool: refactored complete tag walk engine due to several stack smashing issues (fsanitize=address)
added new option to detect known fake frames
--ignore-fake-frames : do not convert fake frames
14.06.2019
==========
hcxpcaptool: complete rewrite of RSN-IE PMKID detection within association frames and reassociation frames
07.06.2019
==========
hcxpcaptool: added new option to filter output by a single MAC address
all packets which doesn't contain this MAC in address 1, address 2 or address 3 are ignored.
--filtermac=<mac> : filter output by MAC address
format: 112233445566
07.06.2019
==========
hcxpcaptool: detect and convert PMKIDs from clients
read more here:
https://hashcat.net/forum/thread-6661-post-44869.html#pid44869
30.05.2019
==========
hcxtools moved to v5.1.6 due to a bug in v5.1.5
hcxpcaptool: added 2 new options to convert raw PMKIDs
-K <file> : output raw PMKID file (hashcat hashmode -m 16801 new format)
-Z <file> : output raw PMKID file (hashcat hashmode -m 16801 old format and john)
use this options if you would like to verify a PMKID and yo don't have an ESSID
read more here:
https://github.com/ZerBea/hcxtools/issues/92#issuecomment-497128717
19.05.2019
==========
added new useful script: hcxgrep.py
Works like grep, but for hccapx/pmkid hashfiles - those are detected
automagically. It also can read from stdin and writes on stdout.
It tries to be as close to grep commandline options, this is -h:
usage: hcxgrep.py [-h] [-f FILE] [-v] [-t {essid,mac_ap,mac_sta}]
[PATTERNS] [infile]
Extract records from hccapx/pmkid file based on regexp
positional arguments:
PATTERNS RegExp pattern
infile hccapx/pmkid file to process
optional arguments:
-h, --help show this help message and exit
-f FILE, --file FILE Obtain patterns from FILE, one per line.
-v, --invert-match Invert the sense of matching, to select non-matching
nets
-t {essid,mac_ap,mac_sta}, --type {essid,mac_ap,mac_sta}
Field to apply matching, default essid
By default it greps by essid, but you can choose with -t also to grep
over mac_ap or mac_sta, passed as lowercase hex strings. It also can
read multiple patterns from external file, like those attached. It's
composed from routerkeygen and matches essids with _ or - in them. Of
course this have many false positives and the default PSK can be
changed, but one can easy get those nets he needs to try custom
wordlists or etc.
16.04.2019
==========
finally removed wlanhcx2psk in favor of hcxpsktool
08.04.2019
==========
hcxpcaptool: from now on only PBKDF2 based hashes (EAPOL and PMKID) are converted running options -k -z and -o
raw option -O will convert all EAPOL handshakes.
02.04.2019
==========
Due to hashcat changes:
"WPA/WPA2 cracking: In the potfile, replace password with PMK in order
to detect already cracked networks across all WPA modes"
https://github.com/hashcat/hashcat/commit/b8d609ba1604f4fed62198ae5000e205dcc87f70
hcxpcaptool: added new option -k to convert dumpfile to new hashcat PMKID format
-k <file> : output PMKID file (hashcat hashmode -m 16800 new format)
-z <file> : output PMKID file (hashcat hashmode -m 16800 old format and john)
use hcxhashcattool to convert old 2500 and old 16800 potfile to new hashcat potfile Format:
-p <file> : input old hashcat potfile
accepted potfiles: 2500 or 16800
-P <file> : output new potfile file (PMK:ESSID:PSK)
hcxhashcattool -p oldhashcat.2500.pot -P newhashcat.potfile
hcxhashcattool -p oldhashcat.16800.pot -P newhashcat.potfile
30.03.2019
==========
hcxpcaptool: retrieve IMSI from UMTS Authentication and Key Agreement (EAP-AKA)
and EAP-SIM (GSM Subscriber Modules) Authentication
19.03.2019
==========
wlanhcx2ssid: use systemwide oui.txt (/usr/share/ieee-data/oui.txt), if exist
whoismac: use systemwide oui.txt (/usr/share/ieee-data/oui.txt), if exist
18.03.2019
==========
wlancap2wpasec: added man 1 page
hcxpcaptool: added new option -M to collect IMSI numbers
-M <file> : output unsorted IMSI number list
17.03.2019
==========
hcxpcaptool: added man 1 page
hcxpsktool: added man 1 page
hcxhash2cap: added man 1 page
09.03.2019
==========
hcxtools moved to version 5.1.3 due to change of pcapng comment field
07.03.2019
==========
hcxpcaptool added GPX comment field for GPS time from GPS device
<?xml version="1.0"?>
<gpx version="1.0" creator="hcxpcaptool"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://www.topografix.com/GPX/1/0"
xsi:schemaLocation="http://www.topografix.com/GPX/1/0 http://www.topografix.com/GPX/1/0/gpx.xsd">
<name>test3.gpx</name>
<trk>
<name>dntest.pcapng</name>
<trkseg>
<trkpt lat="49.126353" lon="4.626187">
<ele>129.500000</ele>
<time>2019-03-06T22:27:45Z</time>
<name>1af87c9124a3</name>
<cmt>GPS-TIME:2019-03-06T22:28:00Z</cmt>
</trkpt>
26.02.2019
==========
hcxtools moved to version 5.1.3 due to several bug fixes
18.02.2019
==========
hcxtools moved to version 5.1.2 due to implementation of serveral new options
14.02.2019
==========
wlancap2wpasec: added new option -e
-e <email address> : set email address, if requiered
13.02.2019
==========
hcxpsktool added full support (option -j) for john
-i <file> : input EAPOL hash file (hashcat)
-j <file> : input EAPOL hash file (john)
-z <file> : input PMKID hash file (hashcat and john)
12.02.2019
==========
hcxpcaptool: added new option -X
-X <file> : output client probelist
: format: mac_sta:probed ESSID (autohex enabled)
added new tool: hcxwltool
while hcxpsktool is designed to run on hcxpcaptool -o and -z output,
hcxwltool is designed to run on hcapcaptool -E, -I and -U output
$ hcxwltool -h
hcxwltool 5.1.1 (C) 2019 ZeroBeat
usage:
hcxwltool <options>
options:
-i : input worlist
-o <file> : output wordlist to file
-h : show this help
-v : show version
--straight : output format untouched
--digit : output format only digits
--xdigit : output format only xdigits
--lower : output format only lower
--upper : output format only upper
--capital : output format only capital
--length=<digit> : password lenght (8...32)
--help : show this help
--version : show version
examples:
hcxwltool -i wordlist --straight | sort | uniq | | sort | uniq | hashcat -m 2500 hashfile.hccapx
hcxwltool -i wordlist --gigit --length=10 | sort | uniq | | sort | uniq | hashcat -m 2500 hashfile.hccapx
hcxwltool -i wordlist --digit | sort | uniq | hashcat -m 16800 hashfile.16800
hcxwltool -i wordlist --xdigit | sort | uniq | john --stdin --format=wpapsk-opencl hashfile.16800
11.02.2019
==========
whoismac: added two new options to convert ESSID HEX to ASCII or ESSID ASCII to HEX
-e <ESSID> : input ESSID
-x <xdigit> : input ESSID in hex
example:
$ whoismac -e default
64656661756c74
now search for this essid, running simple bash commands:
cat hashfile.16800 | grep 64656661756c74
02.02.2019
==========
release hcxtools v 5.1.1
removed....: wlanhcx2psk
replaced by: hcxpsktool
removed....: wlanhcx2cap
replaced by: hcxhash2cap
no more libcap dependency!
01.02.2019
==========
hcxhash2cap: added new option to canvert john WPAPSK has file to cap
hcxhash2cap will replace wlanhcx2cap, soon
$ hcxhash2cap -h
hcxhash2cap 5.1.0 (C) 2019 ZeroBeat
usage:
hcxhash2cap <options>
options:
-c <file> : output cap file
if no cap file is selected, output will be written to single cap files
format: mac_sta.cap (mac_sta.cap_x)
--pmkid=<file> : input PMKID hash file
--hccapx=<file> : input hashcat hccapx file
--hccap=<file> : input hashcat hccap file
--john=<file> : input John the Ripper WPAPSK hash file
--help : show this help
--version : show version
31.01.2019
==========
hcxhash2cap: added new options to convert hccapx to cap and hccap to cap
29.01.2019
==========
aded new tool: hcxhash2cap
22.01.2019
==========
hcxpcaptool: in preparation of hccapx successor, hcxpcaptool now count oversized (>0xff) EAPOLframes
EAPOL packets (oversized)....: xx
read more here:
https://github.com/hashcat/hashcat/issues/1816
13.12.2018
==========
hcxpcaptool: removed options -x and -X (old hccap format)
hcxpcaptool: added options --hccap-out and --hccap-raw-out (old hccap format)
--hccap-out=<file> : output old hccap file (hashcat -m 2500)
--hccap-raw-out=<file> : output raw old hccap file (hashcat -m 2500)
09.12.2018
==========
hcxpcaptool: detect EAPOL GROUP KEYs
hcxpcaptool: move option -H to --hexdump-out
hcxpcaptool: added new options (--eapol-out, --network-out)
--eapol-out=<file> : output EAPOL packets in hex
format = mac_ap:mac_sta:eapol
--network-out=<file> : output network information
format = mac_ap:ESSID
--hexdump-out=<file> : output dump raw packets in hex
05.12.2018
==========
moved to v 5.1.0 (according to hashcat)
hcxpcaptool: detect EAPOL RC4 KEYs
04.12.2018
==========
hcxpcaptool: fixed bug in FCS on BE systems
hcxpcaptool: detect MESH-IDs
26.11.2018
==========
several big endian fixes
switched to version 5.0.1
19.11.2018
==========
hcxpcaptool: improved detection of ESSID changes in merged capfiles
30.10.2018
==========
hcxtools moved to version 5.0.0
hcxpsktool: added NETGEARxx list
--netgear : include NETGEAR candidates
03.10.2018
==========
hcxpcaptool: use GMT time
30.09.2018
==========
hcxhashcattool: accept 16800 potfiles
29.09.2018
==========
hcxpcaptool: removed option -Z
Allow hashfile for -m 16800 to be used with -m 16801
https://github.com/hashcat/hashcat/commit/1b980cf01000c81dfd0ca085593f8c1d66d43188
added new option -g
-g <file> : output GPS file\n"
format = GPX (accepted for example by Viking and GPSBabel)\n"
24.09.2018
==========
whoismac new option to get VENDOR information from a hashcat 2500 potfile line
-P <hashline> : input EAPOL hashline from potfile
20.09.2018
==========
prepare new tool (experimental): hcxpsktool (supports hccapx and 16800 hashfile)
hcxpsktool will replace wlanhcx2psk, when all wlanhcx2psk functions are added
15.09.2018
==========
hcxpcaptool: added detection of Cisco Systems, Inc VENDOR information in authentication
06.09.2018
==========
hcxpcaptool: added detection of Netgear VENDOR information in authentication
04.09.2018
==========
hcxpcaptool: try to detect and remove damaged ESSIDs
26.08.2018
==========
whoismac added new option -p to get information about VENDOR and print ESSID in ASCII
"-p <hashline> : input PMKID hashline\n"
17.08.2018
==========
hcxpcaptool skip unknown option (thanks to magnumripper)
hcxpcaptool detect Wilibox Delibrant Group LLC authentication
hcxpcaptool detect NETWORK EAP authentication system
07.08.2018
==========
added communication between hcxdumtool and hcxpcaptool via pcapng option fields:
62108 for REPLAYCOUNT uint64_t
62109 for ANONCE uint8_t[32]
03.08.2018
==========
hcxtools release 4.2.0
Todo:
hcxdumptool 4.2.0 will randomize ap-less attacks.
hcxpcaptool will convert this handshakes correctly, but will not detect them as ap-less attack
This feature will be added in hcxtools 4.2.1
01.08.2018
==========
moved raspberry pi stuff and dumper stuff to hcxdumptool repository
from now on hcxtools only includes conversion tools
25.07.2018
==========
hcxtools moved to 4.2.0 rc1
hcxpcaptool:
added hashmodes -m 16800 and -m 16801
and new options:
-z <file> : output PMKID file (hashcat hashmode -m 16800 - WPA*-PMKID-PBKDF2)
-Z <file> : output PMKID file (hashcat hashmode -m 16801 - WPA*-PMKID-PMK)
use hcxpcaptool as dumper/attacker, convert with hcxpcaptool, retrieve PSK using hashcat
removed wlandump-ng (old scool, deprecated)
removed wlancap2hcx (old scool, deprecated)
17.07.2018
==========
hcxpcaptool:
show detailed file stats on pcapng files - go in sync with (upcomming) hcxdumptool 4.2.0
17.07.2018
==========
hcxpcaptool:
added detection of all EAP types:
EAP_PACKET
EAPOL_START
EAPOL_LOGOFF
EAPOL_KEY
EAPOL_ASF
EAPOL_MKA
15.07.2018
==========
wlanhcx2psk:
added more weak candidates based on OSINT from wpa-sec
07.07.2018
==========
hcxpcaptool:
added detection of BROADCOM specific authentication
01.07.2018
==========
hcxpcaptool:
added detection of FILS authentication algorithm
27.06.2018
==========
hcxpcaptool:
added detection of authentication algorithms
23.06.2018
==========
hcxpcaptool:
added full support for AVS header (DLT_IEEE802_11_RADIO_AVS)
22.06.2018
==========
hcxpcaptool:
added full support for TaZmen Sniffer Protocol (TZSP)
21.06.2018
==========
hcxpcaptool:
added detection of TaZmen Sniffer Protocol (TZSP)
20.06.2018
==========
hcxpcaptool:
added conversion of WDS packets
19.06.2018
==========
hcxpcaptool:
added detection of RADIUS authentication with Ethernet II header
05.05.2018
==========
hcxpcaptool:
improved detection of broken ESSIDs
improved detection of broken EAPOL frames
wlanhcx2ssid (option -F):
improved detection of broken ESSIDs
omproved detection of broken EAPOL frames
12.03.2018
==========
moved to v 4.1.5
added new options wlancap2wpasec
$ wlancap2wpasec -h
wlancap2wpasec 4.1.5 (C) 2018 ZeroBeat
usage: wlancap2wpasec <options> [input.cap] [input.cap] ...
wlancap2wpasec <options> *.cap
wlancap2wpasec <options> *.*
options:
-k <key> : wpa-sec user key
-u <url> : set user defined URL
default = https://wpa-sec.stanev.org
-t <seconds> : set connection timeout
default = 30 seconds
-R : remove cap if upload was successful
-h : this help
25.02.2018
==========
split repository!
moved hcxdumptool to https://github.com/ZerBea/hcxdumptool
move pioff to https://github.com/ZerBea/hcxdumptool/hcxpioff
from now on, hcxtools will be the mostly "portable part"
17.02.2018
==========
hcxpcaptool
added nonce fuzzing logic for john and old hashcat (hccap) according to bitmask:
0: MP info
1: MP info
2: MP inf
3: x (unused)
4: ap-less attack (set to 1) - no nonce-error-corrections neccessary
5: LE router detected (set to 1) - nonce-error-corrections only for LE neccessary
6: BE router detected (set to 1) - nonce-error-corrections only for BE neccessary
7: not replaycount checked (set to 1) - replaycount not checked, nonce-error-corrections definitely neccessary
15.02.2018
==========
hcxpcaptool
added detection of router endianess and ap-less attacks:
bitmask for message_pair file:
0: MP info
1: MP info
2: MP inf
3: x (unused)
4: ap-less attack (set to 1) - no nonce-error-corrections neccessary
5: LE router detected (set to 1) - nonce-error-corrections only for LE neccessary
6: BE router detected (set to 1) - nonce-error-corrections only for BE neccessary
7: not replaycount checked (set to 1) - replaycount not checked, nonce-error-corrections definitely neccessary
using bit 4 to 7, hcxtools are able to interact with hascat - that will increase speed for hashcat.
09.02.2018
==========
hcxpcaptool
added full implementation of PPP-CHAP authentication
added detection of RADIUS (UDP destination 1812)
new dependency: libopenssl
07.02.2018
==========
hcxpcaptool
added full implementation of TACACS+
--tacacsplus-out=<file> : output TACACS+ authentication file (hashcat -m 16100, john tacacs-plus)
05.02.2018
==========
hcxpcaptool
improved help menu
ignore empty usernames
added new option
--md5-john-out=<file> : output MD5 challenge file (john chap)
04.02.2018
==========
hcxpcaptool
continued implementation of EAP (RADIUS): netNTLMv1, MD5 challenge
added new options
-U <file> : output username list (unsorted)
--netntlm-out=<file> : output netNTLMv1 file (hashcat -m 5500, john netntlm)
--md5-out=<file> : output MD5 challenge file (hashcat -m 4800, john chap)
03.02.2018
==========
added hcxphashcattool (calculate PMKs from hashcat -m 2500 potfile)
$ hcxhashcattool -h
hcxhashcattool 4.1.0 (C) 2018 ZeroBeat
usage:
hcxhashcattool <options>
options:
-p <file> : input hashcat -m 2500 potfile
-P <file> : output PMK file (PMK:ESSID:PSK)
-h : show this help
-v : show version
01.02.2018
==========
hcxpcaptool
added detection of TCP and UDP network protocol
neccessary for IP based authentications
31.01.2018
==========
hcxtools moved to v 4.1.0
and starts into the 3. generation with
- hcxdumptool (will replace wlandump-ng) and
- hcxpcaptool (will replace wlancap2hcx)
29.01.2018
==========
hcxpcaptool
improved detection of handshakes
removed options -A -S ( will improve them and add them later again)
17.01.2018
==========
hcxpcaptool
added new options
-O <file> : output raw hccapx file
-x <file> : output hccap file
-X <file> : output raw hccap file
-j <file> : output john WPAPSK-PMK file
-J <file> : output raw john WPAPSK-PMK file
--time-error-corrections : maximum allowed time gap (default: 10000ms)
--nonce-error-corrections : maximum allowed nonce gap (default: 8)
: should be the same value as in hashcat
option -O is designed for third party tools which like to strip handshakes by themselves
options -x and -X are designed for use on older systems and old hashcat version
16.01.2018
==========
hcxpcaptool
added new option -o
-o <file> : output hccapx file
convert cap/pcap/pcapng to hccapx
15.01.2018
==========
hcxpcaptool
added new option -V
-V : verbose (but slow) status output
Running hcxpcaptool without options on cap/pcap/pcapng files
shows only limited stauts output
If you need detailed informations, use -V
14.01.2018
==========
hcxpcaptool
added suport for gzip compressed cap/pcap/pcapng files
new dependency: zlib
14.01.2018
==========
hcxpcaptool
added new options -P -I
-I <file> : output identities list
-P <file> : output possible WPA/WPA2 plainmasterkey list
13.01.2018
==========
hcxpcaptool
added new option
-S <file> : output station EAPOL information list
date::timestamp:mac_sta:mac_ap:epol_len:eapol
moved internal to tv_usec timestamp
12.01.2018
==========
hcxdumptool
added new option
-C <digit> : comma separated scanlist (1,3,5,7...)
support for scanlist
hcxpcaptool
added new option
-A <file> : output access point anonce information list (forensics purpose)
date:mac_sta:mac_ap:keyver(1=M1, 2=M3, 3=M1+M3):replaycount(in hex):anonce
11.01.2018
==========
hcxpcaptool
added new options
-E <file> : output wordlist (autohex enabled) to use as wordlist
-T <file> : output traffic information list
10.01.2018
==========
hcxpcaptool
added option -H
-H : dump raw packets in hex
09.01.2018
==========
- move hcxtools to v 4.0.2
- renamed wlandump-rs to hcxdumptool
- removed wlancapinfo -> replaced by hcxpcaptool
+get rid of libpcap dependency)
+added full pcapng support
$ hcxpcaptool -h
hcxpcaptool 4.0.2 (C) 2017 ZeroBeat
usage:
hcxpcaptool <options>
hcxpcaptool <options> [input.pcap] [input.pcap] ...
hcxpcaptool <options> *.cap
hcxpcaptool <options> *.*
options:
-h : show this help
-v : show version
07.01.2018
==========
wlandump-rs
added option -l
-l : enable capture of IPv4/IPv6 packets
06.01.2018
==========
wlandump-ng
added option -l
-l : enable capture of IPv4/IPv6 packets
21.12.2017
==========
wlancap2hcx
removed option -x
now wlancap2hcx looks first for association/re-associationrequests
or for directed proberequests or for proberesponseses
and at last (if no other frames found in the cap) for a beacon
21.12.2017
==========
wlancap2hcx
added new option to remove handshakes that that belong to the same authentication sequence
-D : remove handshakes that belong to the same authentication sequence
: you must use nonce-error-corrections on that file!
wlanhcx2ssid
added new option to remove handshakes that that belong to the same authentication sequence
-D <file> : remove handshakes that belong to the same authentication sequence
: you must use nonce-error-corrections on that file!
17.12.2017
==========
moved to version 4.0.1
added wlandump-rs
- use raw sockets instead of libpcap
- faster and more aggressive than wlandump-ng
- able to capture more handchakes than wlandump-ng
- automatic use channel 14 and 5GHz channels if driver supports this
- improvements on scan engine
- improvements on authentication engine
- use ap blacklist instead of BPF
$ wlandump-rs -h
wlandump-rs 4.0.1 (C) 2017 ZeroBeat
usage: wlandump-rs <options>
options:
-i <interface> : interface
-o <dump file> : output file in pcapformat including radiotap header (LINKTYPE_IEEE802_11_RADIOTAP)
-c <digit> : set channel (default = channel 1)
-t <seconds> : stay time on channel before hopping to the next channel
: default = 5 seconds
-B <file> : blacklist (do not deauthenticate clients from this hosts - format: xxxxxxxxxxxx)
-I : show suitable wlan interfaces and quit
-T <maxerrors> : terminate after <xx> maximal errors
: default: 1000000
-D : enable to transmit deauthentication- and disassociation-frames
-P : enable poweroff
-s : enable status messages
-h : show this help
-v : show version
16.12.2017
==========
wlancap2wpasec
-----------
added option to remove cap file if upload was successful
-R : remove cap if upload was successful
05.12.2017
==========
wlanhcx2ssid
-----------
added option to strip damaged records from hccapx file
-F <file> : strip bad records and write only flawless records to hccapx file
Detected errors (more follows later):
- bad keytype in EAPOL frame
21.11.2017
==========
wlancap2hcx
-----------
added detection and conversation of TACACS+ Authentication
-t <file> : output TACACS+ file (hashcat -m 16100, john tacacs-plus)
21.11.2017
==========
wlandump-ng
-----------
added new option -P for use with hard coded GPIO switch
-P : terminate program and poweroff raspberry pi by GPIO switch
: default: terminate program and do not power off
20.11.2017
==========
wlandump-ng
-----------
do not terminate wlandum-ng if channel set failed
instead reset channel back to 1
31.10.2017
==========
wlandump-ng
-----------
improved status: added beacons, proberequests, proberesponses, associationrequests and reassociationrequests
warning in help mennu that driver must support 5GHz
29.10.2017
==========
wlanrcascan
-----------
added option -l (loopcount)
wlandump-ng
-----------
added detection of fast BSS transition (fast roaming)
wlancap2hcx
-----------
added detection of fast BSS transition (fast roaming)
28.10.2017
==========
- added changelog
- merged wlanresponse and wlandump-ng
bash_profile
------------
adapted to new wlandump-ng
wlanresponse
------------
- removed
wlandump-ng
-----------
- waterfall status
- improved deauthentication
stop when retrieved one complete handshake (M1-M4) from ap <-> client
- improved disassociation
stop when retrieved one complete handshake (M1-M4) from ap <-> client
- send one undirected proberequest to broadcast after channel change
- improved expanded EAPOL handling
- improved authentication
- improved beaconing on proberequests
- now wlandump-ng is passive by default (only receive) - transmit must be enabled
- changed / new options:
-R : enable to respond to all requests
-D : enable deauthentications
-d : enable disassociations
-E <digit> : stop deauthentications and disassociations if xx complete handshakes received
: default = 1 complete handshake (M1-M4)
-U : send one undirected proberequest to broadcast after channel change
-B : enable beaconing on last proberequest
"-s : enable status messages\n"
localtime, channel, mac_ap, mac_sta, information
11:02:52 11 xxxxxxxxxxxx <-> xxxxxxxxxxxx M1M2 handshake (forced)
11:01:45 11 xxxxxxxxxxxx <-> xxxxxxxxxxxx M1M2 handshake (forced-retransmission)
11:03:57 11 xxxxxxxxxxxx <-> xxxxxxxxxxxx M1M2 handshake (not verified)
11:03:57 11 xxxxxxxxxxxx <-> xxxxxxxxxxxx M2M3 handshake (verified)
11:03:57 11 xxxxxxxxxxxx <-> xxxxxxxxxxxx M3M4 handshake (established)
16:36:13 1 xxxxxxxxxxxx --> xxxxxxxxxxxx identity request: hello
16:36:13 1 xxxxxxxxxxxx <-- xxxxxxxxxxxx identity response: WFA-SimpleConfig-Registrar-1-0
16:36:14 1 xxxxxxxxxxxx --> xxxxxxxxxxxx WPS-M1 message
16:36:14 1 xxxxxxxxxxxx <-- xxxxxxxxxxxx WPS-M2 message
16:36:16 1 xxxxxxxxxxxx --> xxxxxxxxxxxx WPS-M3 message
16:36:16 1 xxxxxxxxxxxx <-- xxxxxxxxxxxx WPS-M4 message
16:36:16 1 xxxxxxxxxxxx --> xxxxxxxxxxxx WPS-M5 message
16:36:16 1 xxxxxxxxxxxx <-- xxxxxxxxxxxx WPS-M6 message
16:36:16 1 xxxxxxxxxxxx --> xxxxxxxxxxxx WPS-M7 message
16:36:16 1 xxxxxxxxxxxx <-- xxxxxxxxxxxx WPS-M8 message