hobbit-plugins (debian/20170122)

Tree @debian/20170122 (Download .tar.gz)

Xymon/Hobbit Plugins
====================

This set of client and server plugins (scripts, extensions) is moderately
tailored for Debian, but should be pretty usable on any *nix platform.

Some plugins require additional packages installed.

Included client plugins
-----------------------

### apt - check for outstanding updates

#### Optional configuration files

* `/etc/xymon/apt_no_repo_accept` - Packages not from repositories but ok.
* `/etc/xymon/apt_reject` - Packages which must not be installed at all.

Both configuration files should have one package names matching
Perl regular expression per line. The regular expression is
implicitly surrounded by `^` and `$` so a line just containing
`gnome` doesn't match most gnome packages but only the `gnome` meta
package. Use `.*` at the end of the line to match multiple packages
with the same prefix. Please note that this also means that you
have to escape plus-signs (`+`) in package names with backslash
(`\`). See the example below.

#### Example file

    conkeror
    dphys-swapfile
    unburden-home-dir
    virtualbox-ose-modules-.*
    xlockmore-gl
    xscreensaver.*
    g\+\+

### bkpc - check hosts backed up with BackupPC

Based on the [nagios backuppc check](http://n-backuppc.cvs.sf.net/viewvc/n-backuppc/check_backuppc/check_backuppc?revision=1.21).

In comparison to other included checks this one uses no special
configuration files but needs to be configured via commandline
options in `/etc/xymon/clientlaunch.d/backuppc.cfg`

Run `/usr/lib/xymon/client/ext/backuppc --help` for available options.

#### Needs

* backuppc
* sudo

### cciss - check hardware RAIDs in HP ProLiant servers

#### Needs

* sudo
* cciss-vol-status

### cntrk - check the size of the Netfilter Connection Tracking table.

#### Needs

* libfile-slurp-perl

### dirtyetc - check for conffiles which are modified compared to Debian's defaults but should not be.

#### Configuration file

* `/etc/xymon/dirty_etc_ok` - Which files are ok to be modified.

The file should contain one path match Perl regular expression per
line, with `^` and `$` implied.

#### Example file

    /etc/xymon/clientlaunch.d/dirtyetc.cfg
    /etc/dphys-config
    /etc/unburden_home_dir.*

#### Needs

* sudo (recommended)
* debsums

### dirtyvcs - check for not checked in modifications or files in VCS repositories

Also checks the consistency of (non-bare) git repositories.

#### Configuration files

* `/etc/xymon/dirty_vcs_dirs` - Where to look for repositories.
* `.dirtyvcs_no_fsck` (per git repository)
* `.git/dirtyvcs_no_fsck` (local per git repository)

The file `dirty_vcs_dirs` should contain one directory path per line,
wildcards allowed. In each of the matching directories, it looks
for the typical subdirectories of the supported version control
systems (for now Git, Mercurial, Bzr and Subversion) and queries
the state of the repository.

Paths listed with a leading exclamation mark (`!`) will be
skipped. This allows system administrators to check for their
repos, but skip users' repos. Also supports wildcards there.

The existence of a file named .dirtyvcs_no_fsck (per git
repository, to be committed into the repository) or
`.git/dirtyvcs_no_fsck` (local per working copy) prevents that
dirtyvcs runs `git fsck` on the repository. This may be needed on
big repositories where `git fsck` runs quite some time or needs too
much RAM or I/O.

#### Example file

    /etc
    /etc/*
    /etc/amavis/conf.d
    /opt
    /opt/*
    /opt/*/bin
    /opt/*/sbin
    /usr/local/bin
    /usr/local/sbin
    !/opt/test/bin

#### Needs

* libfile-which-perl

### dnsq - checks for working DNS on clients.

#### Configuration file

* `/etc/xymon/dnsq`

Add one hostname to lookup per file. Will use builtin defaults if
the file doesn't exist.

#### Needs

* libnet-dns-perl
* libfile-slurp-perl.

### ipmi - read IPMI sensors and event log

#### Needs

* ipmitool

### misc - plugin which can aggregate the output and states of other plugins

#### Needs

* libipc-run-perl

#### misc.d/zombies - Warns about processes in zombie state.

##### Configuration file

* `/etc/xymon/zombies_ignore`

Text up to the first whitespace is considered a perl regular
expression (with implicit `^…$` around) to match the name in the
`Name` line of `/proc/*/status` of the zombie's parent process.

If the regular expression contains the string `:^` the text before
this string is a regular expression matched against the user name
of the owner of the process and the text behind is the actual
regular expression matched against the zombie's parent program
name. Use this to ignore e.g. ssh zombies only if they belong to a
specific user.

All text starting with the first non-whitespace after the first
white space is considered the reason for whitelisting these zombie
processes.

##### Example file

See `/usr/share/doc/hobbit-plugins/examples/zombies_ignore`

### libs - check for running processes with upgraded libraries

It is possible to ignore some deleted files either in general or
for specific processes identified by their executable path.  See
`/usr/share/doc/hobbit-plugins/examples/libs.local.yaml` or
`/etc/xymon/libs.yaml` for examples.  Use `/etc/xymon/libs.local.yaml`
to specify local additions to the configurations.  If needed you
can edit `/etc/xymon/libs.yaml` but it is recommended to leave it
alone as it contains the generic exceptions distributed by the
Debian package.

For each process you can list an array of regular expressions.
A process path of `*` indicates regular expressions applied to
any process.

#### Needs

* binutils
* lsof
* sudo
* libsort-naturally-perl
* libyaml-tiny-perl

### mailman - check for the existence of Mailman qfiles.

#### Needs

* sudo

### mdstat - check for failed or resyncing software RAID devices

### mq - checks (Postfix's) mail queue

Checks at least Postfix's mail queue by parsing the mailq command's
output. Patches to support other MTAs are welcome.

Recognizes too many mails in the mailq as well as possible RBL
issues.

### ntpq - check the ntpd daemon synchronization status

#### Needs

* ntp

### postgres - statistics graphs for postgresql databases

#### Needs

* libdbd-pg-perl

### sftbnc - check if the local Postfix MTA has soft_bounce enabled.

### temp - check temperatures of CPU and disks

It is possible to configure individual temperature thresholds. See
`/usr/share/doc/hobbit-plugins/examples/temp.local.yaml` or
`/etc/xymon/temp.yaml` for examples.  Use `/etc/xymon/temp.local.yaml` to
specify local additions to the configurations.  If needed you can edit
`/etc/xymon/libs.yaml` but it is recommended to leave it alone as it
contains the default thresholds distributed by the Debian package.

#### Needs

* libfile-which-perl
* libyaml-tiny-perl

#### Needs for specific temperature checks

Checking disk temperature requires `hddtemp` and either `hddtemp`
running in daemon mode or `sudo` being installed.

Checking disk temperature of disks behind Areca RAID controllers
requires `smartmontools` and `sudo` being installed.

Checking NVidia GPU temperature requires `libxml-twig-perl` and the
(non-free) `nvidia-smi` package being installed. May need `sudo` being
installed, depending on the permissions of `/dev/nvidiactl`.


Included server plugins
-----------------------

### aptdiff - monitor list of installed packages in host pools

### conn6 - check IPv6 connectivity

Enable this test in `/etc/xymon/xymonlaunch.d/conn6.cfg` and add
`conn6` to the services of a host in `hosts.cfg` and this script will
`ping6` the AAAA record of the given host.

Alternatively you can add a comma separated list of IPv6 addresses or
hostnames that resolve to IPv6 addresses as a parameter to `conn6`, to `ping6`
all these addresses.

#### Examples

    10.1.2.3 foo # ftp conn6:2001:db8:1::42
    10.1.2.4 bar # smtp conn6
    10.1.2.5 baz # conn6:baz.example.com dialup
    10.1.2.6 router # conn6:2001:db8:1::1,2001:db8:2::1

#### Needs

* fping

### ircbot - relay status changes to IRC

#### Needs

* libpoe-component-irc-perl

### tftp - check downloading files from TFTP servers

Enable this test in `/etc/xymon/xymonlaunch.d/tftp.cfg` and add
tftp to the services of a host and this script will try to
download the file `/pxelinux.0` via TFTP from the given host.

Alternatively you can add colon separated a file or path which
should be used to test the TFTP server.

Currently only one file per server can be tested.

#### Examples

    10.1.2.3 foo # ftp tftp
    10.1.2.4 bar # smtp tftp:bootmgr.exe
    10.1.2.5 baz # tftp:/sparc.img

#### Needs

* libnet-tftp-perl

More plugins
------------

 * [Xymonton](http://xymonton.org/) (formerly "The Shire")
 * Many [Big Brother plugins](http://www.deadcat.net/) also run with Xymon
 * The Xymon monitor itself can be found at http://xymon.sourceforge.net/

Feedback
--------

Feedback welcome, especially suggestions for new plugins. Please use
the [Debian BTS](http://bugs.debian.org/), e.g. via
[reportbug](https://packages.debian.org/reportbug), or e-mail us at
hobbit-plugins@packages.debian.org.
Commit History @debian/20170122

»»