;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Copyright(c) 2011-2015 Intel Corporation All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; modification, are permitted provided that the following conditions
; are met:
; * Redistributions of source code must retain the above copyright
; notice, this list of conditions and the following disclaimer.
; * Redistributions in binary form must reproduce the above copyright
; notice, this list of conditions and the following disclaimer in
; the documentation and/or other materials provided with the
; distribution.
; * Neither the name of Intel Corporation nor the names of its
; contributors may be used to endorse or promote products derived
; from this software without specific prior written permission.
;
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
; "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
; LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
; A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
; OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
; SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
; LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
; DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
; THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;; Optimized pq of N source vectors using SSE3
;;; int pq_check_sse(int vects, int len, void **array)
;;; Generates P+Q parity vector from N (vects-2) sources in array of pointers
;;; (**array). Last two pointers are the P and Q destinations respectively.
;;; Vectors must be aligned to 16 bytes. Length must be 16 byte aligned.
%include "reg_sizes.asm"
%ifidn __OUTPUT_FORMAT__, elf64
%define arg0 rdi
%define arg1 rsi
%define arg2 rdx
%define arg3 rcx
%define arg4 r8
%define arg5 r9
%define tmp r11
%define tmp3 arg4
%define return rax
%define func(x) x: endbranch
%define FUNC_SAVE
%define FUNC_RESTORE
%endif
%ifidn __OUTPUT_FORMAT__, win64
%define arg0 rcx
%define arg1 rdx
%define arg2 r8
%define arg3 r9
%define tmp r11
%define tmp3 r10
%define return rax
%define stack_size 7*16 + 8 ; must be an odd multiple of 8
%define func(x) proc_frame x
%macro FUNC_SAVE 0
alloc_stack stack_size
save_xmm128 xmm6, 0*16
save_xmm128 xmm7, 1*16
save_xmm128 xmm8, 2*16
save_xmm128 xmm9, 3*16
save_xmm128 xmm10, 4*16
save_xmm128 xmm11, 5*16
save_xmm128 xmm15, 6*16
end_prolog
%endmacro
%macro FUNC_RESTORE 0
movdqa xmm6, [rsp + 0*16]
movdqa xmm7, [rsp + 1*16]
movdqa xmm8, [rsp + 2*16]
movdqa xmm9, [rsp + 3*16]
movdqa xmm10, [rsp + 4*16]
movdqa xmm11, [rsp + 5*16]
movdqa xmm15, [rsp + 9*16]
add rsp, stack_size
%endmacro
%endif
%define vec arg0
%define len arg1
%define ptr arg3
%define pos return
%define xp1 xmm0
%define xq1 xmm1
%define xtmp1 xmm2
%define xs1 xmm3
%define xp2 xmm4
%define xq2 xmm5
%define xtmp2 xmm6
%define xs2 xmm7
%define xp3 xmm8
%define xq3 xmm9
%define xtmp3 xmm10
%define xs3 xmm11
%define xpoly xmm15
;;; Use Non-temporal load/stor
%ifdef NO_NT_LDST
%define XLDR movdqa
%define XSTR movdqa
%else
%define XLDR movdqa
%define XSTR movntdq
%endif
default rel
[bits 64]
section .text
align 16
mk_global pq_check_sse, function
func(pq_check_sse)
FUNC_SAVE
sub vec, 3 ;Keep as offset to last source
jng return_fail ;Must have at least 2 sources
cmp len, 0
je return_pass
test len, (16-1) ;Check alignment of length
jnz return_fail
mov pos, 0
movdqa xpoly, [poly]
cmp len, 48
jl loop16
len_aligned_32bytes:
sub len, 48 ;Do end of vec first and run backward
loop48:
mov ptr, [arg2+8+vec*8] ;Get address of P parity vector
mov tmp, [arg2+(2*8)+vec*8] ;Get address of Q parity vector
XLDR xp1, [ptr+pos] ;Initialize xp1 with P1 src
XLDR xp2, [ptr+pos+16] ;Initialize xp2 with P2 src + 16B ahead
XLDR xp3, [ptr+pos+32] ;Initialize xp3 with P2 src + 32B ahead
pxor xq1, xq1 ;q1 = 0
pxor xq2, xq2 ;q2 = 0
pxor xq3, xq3 ;q3 = 0
mov ptr, [arg2+vec*8] ;Fetch last source pointer
mov tmp, vec ;Set tmp to point back to last vector
XLDR xs1, [ptr+pos] ;Preload last vector (source)
XLDR xs2, [ptr+pos+16] ;Preload last vector (source)
XLDR xs3, [ptr+pos+32] ;Preload last vector (source)
next_vect:
sub tmp, 1 ;Inner loop for each source vector
mov ptr, [arg2+tmp*8] ; get pointer to next vect
pxor xp1, xs1 ; p1 ^= s1
pxor xp2, xs2 ; p2 ^= s2
pxor xp3, xs3 ; p3 ^= s2
pxor xq1, xs1 ; q1 ^= s1
pxor xq2, xs2 ; q2 ^= s2
pxor xq3, xs3 ; q3 ^= s3
pxor xtmp1, xtmp1 ; xtmp1 = 0 - for compare to 0
pxor xtmp2, xtmp2 ; xtmp2 = 0
pxor xtmp3, xtmp3 ; xtmp3 = 0
pcmpgtb xtmp1, xq1 ; xtmp1 = mask 0xff or 0x00 if bit7 set
pcmpgtb xtmp2, xq2 ; xtmp2 = mask 0xff or 0x00 if bit7 set
pcmpgtb xtmp3, xq3 ; xtmp3 = mask 0xff or 0x00 if bit7 set
pand xtmp1, xpoly ; xtmp1 = poly or 0x00
pand xtmp2, xpoly ; xtmp2 = poly or 0x00
pand xtmp3, xpoly ; xtmp3 = poly or 0x00
XLDR xs1, [ptr+pos] ; Get next vector (source data1)
XLDR xs2, [ptr+pos+16] ; Get next vector (source data2)
XLDR xs3, [ptr+pos+32] ; Get next vector (source data3)
paddb xq1, xq1 ; q1 = q1<<1
paddb xq2, xq2 ; q2 = q2<<1
paddb xq3, xq3 ; q3 = q3<<1
pxor xq1, xtmp1 ; q1 = q1<<1 ^ poly_masked
pxor xq2, xtmp2 ; q2 = q2<<1 ^ poly_masked
pxor xq3, xtmp3 ; q3 = q3<<1 ^ poly_masked
jg next_vect ; Loop for each vect except 0
pxor xp1, xs1 ;p1 ^= s1[0] - last source is already loaded
pxor xq1, xs1 ;q1 ^= 1 * s1[0]
pxor xp2, xs2 ;p2 ^= s2[0]
pxor xq2, xs2 ;q2 ^= 1 * s2[0]
pxor xp3, xs3 ;p3 ^= s3[0]
pxor xq3, xs3 ;q3 ^= 1 * s3[0]
mov tmp, [arg2+(2*8)+vec*8] ;Get address of Q parity vector
XLDR xtmp1, [tmp+pos] ;re-init xq1 with Q1 src
XLDR xtmp2, [tmp+pos+16] ;re-init xq2 with Q2 src + 16B ahead
XLDR xtmp3, [tmp+pos+32] ;re-init xq3 with Q2 src + 32B ahead
pxor xq1, xtmp1 ;xq1 = q1 calculated ^ q1 saved
pxor xq2, xtmp2
pxor xq3, xtmp3
por xp1, xq1 ;Confirm that all P&Q parity are 0
por xp1, xp2
por xp1, xq2
por xp1, xp3
por xp1, xq3
ptest xp1, xp1
jnz return_fail
add pos, 48
cmp pos, len
jle loop48
;; ------------------------------
;; Do last 16 or 32 Bytes remaining
add len, 48
cmp pos, len
je return_pass
loop16:
mov ptr, [arg2+8+vec*8] ;Get address of P parity vector
mov tmp, [arg2+(2*8)+vec*8] ;Get address of Q parity vector
XLDR xp1, [ptr+pos] ;Initialize xp1 with P1 src
pxor xq1, xq1 ;q = 0
mov ptr, [arg2+vec*8] ;Fetch last source pointer
mov tmp, vec ;Set tmp to point back to last vector
XLDR xs1, [ptr+pos] ;Preload last vector (source)
next_vect16:
sub tmp, 1 ;Inner loop for each source vector
mov ptr, [arg2+tmp*8] ; get pointer to next vect
pxor xq1, xs1 ; q ^= s
pxor xtmp1, xtmp1 ; xtmp = 0
pcmpgtb xtmp1, xq1 ; xtmp = mask 0xff or 0x00 if bit7 set
pand xtmp1, xpoly ; xtmp = poly or 0x00
pxor xp1, xs1 ; p ^= s
paddb xq1, xq1 ; q = q<<1
pxor xq1, xtmp1 ; q = q<<1 ^ poly_masked
XLDR xs1, [ptr+pos] ; Get next vector (source data)
jg next_vect16 ; Loop for each vect except 0
pxor xp1, xs1 ;p ^= s[0] - last source is already loaded
pxor xq1, xs1 ;q ^= 1 * s[0]
mov tmp, [arg2+(2*8)+vec*8] ;Get address of Q parity vector
XLDR xtmp1, [tmp+pos] ;re-init tmp with Q1 src
pxor xq1, xtmp1 ;xq1 = q1 calculated ^ q1 saved
por xp1, xq1 ;Confirm that all P&Q parity are = 0
ptest xp1, xp1
jnz return_fail
add pos, 16
cmp pos, len
jl loop16
return_pass:
mov return, 0
FUNC_RESTORE
ret
return_fail:
mov return, 1
FUNC_RESTORE
ret
endproc_frame
section .data
align 16
poly:
dq 0x1d1d1d1d1d1d1d1d, 0x1d1d1d1d1d1d1d1d
;;; func core, ver, snum
slversion pq_check_sse, 00, 06, 0033