mbpfan
====================
[](https://travis-ci.org/dgraziotin/mbpfan)
This is an enhanced version of [Allan McRae mbpfan](http://allanmcrae.com/2010/05/simple-macbook-pro-fan-daemon/)
mbpfan is a daemon that uses input from coretemp module and sets the fan speed using the applesmc module.
This enhanced version assumes any number of processors and fans (max. 10).
* It only uses the temperatures from the processors as input.
* It requires coretemp and applesmc kernel modules to be loaded.
* It requires root use
* It daemonizes or stays in foreground
* Verbose mode for both syslog and stdout
* Users can configure it using the file /etc/mbpfan.conf
**Table Of Contents**
- [Supported GNU/Linux Distributions](#supported-gnulinux-distributions)
- [Tested MacBook Models](#tested-macbook-models)
- [Tested iMac/Mac mini Models](#tested-imacmac-mini-models)
- [Requirements](#requirements)
- [Installation](#installation)
- [Arch Linux](#arch-linux)
- [Ubuntu](#ubuntu)
- [Gentoo](#gentoo)
- [Generic Install Instructions (All Other Operating Systems)](#generic-install-instructions-all-other-operating-systems)
- [Run Instructions](#run-instructions)
- [Starting at boot](#starting-at-boot)
- [Usage](#usage)
- [License](#license)
- [Credits](#credits)
## Supported GNU/Linux Distributions
We provide scripts to to load mbpfan daemon at system boot for many distros.
Please note that the support is provided by volunteers. mbpfan needs tests and bug reports.
Supported distributions:
- Ubuntu
- Debian
- Archlinux
- Fedora
- RedHat
- CentOS
- Gentoo
- Alpine
- Trisquel
- Solus
## Tested MacBook Models
This section reports those models where mbpfan was tested successfully. It does not necessarily mean that the daemon does not work on non-listed models.
- MacBook Pro 12,1 13" (Intel i5 - Linux 4.20)
- MacBook Pro 11,4 15" (Intel i7 - Linux 4.9.41)
- MacBook Pro 11,1 13" (Intel i5 - Linux 3.14, Linux 3.15)
- MacBook Pro 9,2 13" (Intel i5/i7 - Linux 3.10)
- MacBook Pro 8,2 15" (Intel i7 - Linux 3.6.2)
- MacBook Pro 8,1 13" (Intel i7 - Linux 3.2.0)
- MacBook Pro 7,1 15" (Intel Core 2 Duo - Linux 3.13)
- MacBook Pro 6,2 15" (Intel i7 - Linux 3.5.0)
- MacBook Pro 6,2 15" (Intel i7 - Linux 3.2.0)
- MacBook Pro 2,2 15" (Intel Core 2 Duo - Linux 3.4.4)
- MacBook Air 6,1 13" (Intel i7 - Linux 3.13)
- MacBook Air 5,2 13" (Intel i5 - Linux 3.16)
- MacBook Air 1,1 13" (Intel Core Duo - Linux 4.4, Linux 4.8)
- MacBook Air 7,2 13" (Intel Core Duo - Linux 4.10)
- MacBook 1,1 (Intel Core Duo - Linux 3.16)
## Tested iMac/Mac mini Models
This section reports the iMac/Mac mini models where mbpfan was tested successfully.
- iMac Retina 16.2 21.5" (Intel i5 - Linux 4.4.0 Ubuntu 16.04)
- iMac 12,1 21.5" (Intel i7 - Linux 4.6.4)
- iMac 5,1 17" (Intel T7400 (Core 2 Duo) - Linux 14.04 Ubuntu)
- Mac mini 2,1 (Core 2 Duo - Linux 4.4.0)
- Mac mini 5,3 (Core i7 2.0 - Linux 4.4.0 elementary/Ubuntu)
- Mac mini 6,1 (Core i7 2.3 - Linux 4.7.3-4-ck Archlinux)
## Tested Mac Pro Models
This section reports the Mac Pro models where mbpfan was tested successfully.
- Mac Pro 3,1
- Mac Pro 4,1 (with 5,1 firmware and hex-core Xeon X5690 mod - Linux 4.14)
## Requirements
Be sure to load the kernel modules **applesmc** and **coretemp**.
These modules are often automatically loaded when booting up GNU/Linux on a MacBook. If that is not the case, you should make sure to load them at system startup.
**How do I know if applesmc and coretemp are loaded?**
In most distributions, you can run the following command:
```bash
lsmod | grep -e applesmc -e coretemp
```
If you see `coretemp` and `applesmc` listed, you are all set.
**If you do not see `coretemp` and `applesmc` listed, you must load them.**
This is _usually_ achieved by inserting the following two lines in the file `/etc/modules`
```
coretemp
applesmc
```
Please check the relevant documentation of your GNU/Linux distribution.
## Installation
### Arch Linux
See [mbpfan-git at AUR](https://aur.archlinux.org/packages/mbpfan-git/).
Otherwise, please refer to the Generic Instructions.
### Ubuntu
Install the ```build-essential``` package.
Then, refer to the Generic Install Instructions.
Otherwise, a step-by-step [tutorial for beginners is available on my website](https://ineed.coffee/3838/a-beginners-mbpfan-tutorial-for-ubuntu/).
### Gentoo
Install the ```mbpfan``` package with:
sudo emerge -av app-laptop/mbpfan
### Generic Install Instructions (All Other Operating Systems)
Compile with
make
Install with
sudo make install
It copies mbpfan to /usr/sbin, mbpfan.conf to /etc (and overwrites existing files),
README.md to /usr/share/doc/mbpfan, and mbpfan.8.gz to /usr/share/man/man8
Run the tests now, see two sections below.
If you would like to compile with Clang instead of GCC, simply set your system's
default compiler to be Clang. Tested with Clang 3.8 and 3.9. Tested with Clang
4.0 along with llvm-lld (The LLVM Linker).
Run The Tests (Recommended)
---------------------------
It is recommended to run the tests after installing the program. Please run the following command _from within the source directory_.
sudo ./bin/mbpfan -t
or
sudo make tests
## Run Instructions
If not installed, run with
sudo bin/mbpfan
If installed, manually run with
sudo mbpfan
If installed and using the init file, run with (Ubuntu example)
sudo service mbpfan start
## Starting at boot
**Ubuntu**
For systemd based init systems (Ubuntu 16.04+), see the systemd section below.
For upstart based init systems (Ubuntu before 16.04), an example upstart job has been provided.
For using it, execute:
sudo cp mbpfan.upstart /etc/init/mbpfan.conf
sudo start mbpfan
**Debian**
An init file suitable for /lib/lsb/init-functions (Debian)
is located in the main folder of the source files, called mbpfan.init.debian
Rename it to mbpfan, give it execution permissions (chmod +x mbpfan)
and move it to /etc/init.d
Then, add it to the default runlevels with (as root):
sudo update-rc.d mbpfan defaults
**Redhat, CentOS, Fedora**
An init file suitable for /etc/rc.d/init.d/functions
(RHEL/CentOS & Fedora) is also located at the same place, this file is called
mbpfan.init.redhat. Also rename it to mbpfan, give it execution permissions
and move it to /etc/init.d
To add the script to the default runlevels, run the following as root:
chkconfig --level 2345 mbpfan on && chkconfig --level 016 mbpfan off
**Gentoo**
To automatically run mbpfan at boot, run as root:
rc-update add mbpfan default
**systemd**
As a special bonus, a service file for systemd is also included. To use it,
execute the following (as root):
sudo cp mbpfan.service /etc/systemd/system/
sudo systemctl enable mbpfan.service
sudo systemctl daemon-reload
sudo systemctl start mbpfan.service
## Usage
Usage: ./mbpfan OPTION(S)
-h Show the help screen
-f Run in foreground
-t Run the tests
-v Be (a lot) verbose
## License
GNU General Public License version 3
**This Project Is Based On:**
* http://allanmcrae.com/2010/05/simple-macbook-pro-fan-daemon/
* http://allanmcrae.com/2011/08/mbp-fan-daemon-update/
* https://launchpad.net/macfanctld
* http://paste2.org/p/862259
* http://www.lobotomo.com/products/FanControl/
## Credits
**This Project uses following library:**
* [ANSI C Application Settings Management](http://pokristensson.com/settings.html) by Per Ola Kristensson.