<!--
Copyright (c) 2006 Arne John Glenstrup <panic@itu.dk>
This file is part of ptouch-driver.
ptouch-driver is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or (at
your option) any later version.
ptouch-driver is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with ptouch-driver; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301
USA
-->
<option type='enum' id='opt/Brother-PT-Margin'>
<comments>
<en>The extra distance, in points (72nds of an inch), by which to
advance the tape before and after each label
</en>
</comments>
<arg_longname>
<en>Extra Margin</en>
</arg_longname>
<arg_shortname>
<en>ExtraMargin</en>
</arg_shortname>
<arg_execution>
<arg_group>Finishing</arg_group>
<arg_order>110</arg_order>
<arg_spot>B</arg_spot>
<arg_substitution />
<arg_proto> Margin=%s </arg_proto>
</arg_execution>
<constraints>
<constraint sense='true'>
<driver>ptouch-pt</driver>
<arg_defval>ev/0mm</arg_defval>
</constraint>
</constraints>
<enum_vals>
<enum_val id="ev/0mm">
<ev_longname>
<en>0 mm</en>
</ev_longname>
<ev_shortname>
<en>0mm</en>
</ev_shortname>
<ev_driverval>0</ev_driverval>
</enum_val>
<enum_val id="ev/1mm">
<ev_longname>
<en>1 mm</en>
</ev_longname>
<ev_shortname>
<en>1mm</en>
</ev_shortname>
<ev_driverval>2.83</ev_driverval>
</enum_val>
<enum_val id="ev/2mm">
<ev_longname>
<en>2 mm</en>
</ev_longname>
<ev_shortname>
<en>2mm</en>
</ev_shortname>
<ev_driverval>5.67</ev_driverval>
</enum_val>
<enum_val id="ev/3mm">
<ev_longname>
<en>3 mm</en>
</ev_longname>
<ev_shortname>
<en>3mm</en>
</ev_shortname>
<ev_driverval>8.50</ev_driverval>
</enum_val>
<enum_val id="ev/4mm">
<ev_longname>
<en>4 mm</en>
</ev_longname>
<ev_shortname>
<en>4mm</en>
</ev_shortname>
<ev_driverval>11.34</ev_driverval>
</enum_val>
<enum_val id="ev/5mm">
<ev_longname>
<en>5 mm</en>
</ev_longname>
<ev_shortname>
<en>5mm</en>
</ev_shortname>
<ev_driverval>14.17</ev_driverval>
</enum_val>
<enum_val id="ev/6mm">
<ev_longname>
<en>6 mm</en>
</ev_longname>
<ev_shortname>
<en>6mm</en>
</ev_shortname>
<ev_driverval>17.01</ev_driverval>
</enum_val>
<enum_val id="ev/7mm">
<ev_longname>
<en>7 mm</en>
</ev_longname>
<ev_shortname>
<en>7mm</en>
</ev_shortname>
<ev_driverval>19.84</ev_driverval>
</enum_val>
<enum_val id="ev/8mm">
<ev_longname>
<en>8 mm</en>
</ev_longname>
<ev_shortname>
<en>8mm</en>
</ev_shortname>
<ev_driverval>22.68</ev_driverval>
</enum_val>
<enum_val id="ev/9mm">
<ev_longname>
<en>9 mm</en>
</ev_longname>
<ev_shortname>
<en>9mm</en>
</ev_shortname>
<ev_driverval>25.51</ev_driverval>
</enum_val>
<enum_val id="ev/10mm">
<ev_longname>
<en>10 mm</en>
</ev_longname>
<ev_shortname>
<en>10mm</en>
</ev_shortname>
<ev_driverval>28.35</ev_driverval>
</enum_val>
<enum_val id="ev/11mm">
<ev_longname>
<en>11 mm</en>
</ev_longname>
<ev_shortname>
<en>11mm</en>
</ev_shortname>
<ev_driverval>31.18</ev_driverval>
</enum_val>
<enum_val id="ev/12mm">
<ev_longname>
<en>12 mm</en>
</ev_longname>
<ev_shortname>
<en>12mm</en>
</ev_shortname>
<ev_driverval>34.02</ev_driverval>
</enum_val>
<enum_val id="ev/13mm">
<ev_longname>
<en>13 mm</en>
</ev_longname>
<ev_shortname>
<en>13mm</en>
</ev_shortname>
<ev_driverval>36.85</ev_driverval>
</enum_val>
<enum_val id="ev/14mm">
<ev_longname>
<en>14 mm</en>
</ev_longname>
<ev_shortname>
<en>14mm</en>
</ev_shortname>
<ev_driverval>39.69</ev_driverval>
</enum_val>
<enum_val id="ev/15mm">
<ev_longname>
<en>15 mm</en>
</ev_longname>
<ev_shortname>
<en>15mm</en>
</ev_shortname>
<ev_driverval>42.52</ev_driverval>
</enum_val>
<enum_val id="ev/16mm">
<ev_longname>
<en>16 mm</en>
</ev_longname>
<ev_shortname>
<en>16mm</en>
</ev_shortname>
<ev_driverval>45.35</ev_driverval>
</enum_val>
<enum_val id="ev/17mm">
<ev_longname>
<en>17 mm</en>
</ev_longname>
<ev_shortname>
<en>17mm</en>
</ev_shortname>
<ev_driverval>48.19</ev_driverval>
</enum_val>
<enum_val id="ev/18mm">
<ev_longname>
<en>18 mm</en>
</ev_longname>
<ev_shortname>
<en>18mm</en>
</ev_shortname>
<ev_driverval>51.02</ev_driverval>
</enum_val>
<enum_val id="ev/19mm">
<ev_longname>
<en>19 mm</en>
</ev_longname>
<ev_shortname>
<en>19mm</en>
</ev_shortname>
<ev_driverval>53.86</ev_driverval>
</enum_val>
<enum_val id="ev/20mm">
<ev_longname>
<en>20 mm</en>
</ev_longname>
<ev_shortname>
<en>20mm</en>
</ev_shortname>
<ev_driverval>56.69</ev_driverval>
</enum_val>
<enum_val id="ev/21mm">
<ev_longname>
<en>21 mm</en>
</ev_longname>
<ev_shortname>
<en>21mm</en>
</ev_shortname>
<ev_driverval>59.53</ev_driverval>
</enum_val>
<enum_val id="ev/22mm">
<ev_longname>
<en>22 mm</en>
</ev_longname>
<ev_shortname>
<en>22mm</en>
</ev_shortname>
<ev_driverval>62.36</ev_driverval>
</enum_val>
<enum_val id="ev/23mm">
<ev_longname>
<en>23 mm</en>
</ev_longname>
<ev_shortname>
<en>23mm</en>
</ev_shortname>
<ev_driverval>65.20</ev_driverval>
</enum_val>
<enum_val id="ev/24mm">
<ev_longname>
<en>24 mm</en>
</ev_longname>
<ev_shortname>
<en>24mm</en>
</ev_shortname>
<ev_driverval>68.03</ev_driverval>
</enum_val>
<enum_val id="ev/25mm">
<ev_longname>
<en>25 mm</en>
</ev_longname>
<ev_shortname>
<en>25mm</en>
</ev_shortname>
<ev_driverval>70.87</ev_driverval>
</enum_val>
<enum_val id="ev/26mm">
<ev_longname>
<en>26 mm</en>
</ev_longname>
<ev_shortname>
<en>26mm</en>
</ev_shortname>
<ev_driverval>73.70</ev_driverval>
</enum_val>
<enum_val id="ev/27mm">
<ev_longname>
<en>27 mm</en>
</ev_longname>
<ev_shortname>
<en>27mm</en>
</ev_shortname>
<ev_driverval>76.54</ev_driverval>
</enum_val>
</enum_vals>
</option>