%YAML 1.1
---
# Suricata configuration file. In addition to the comments describing all
# options in this file, full documentation can be found at:
# https://suricata.readthedocs.io/en/latest/configuration/suricata-yaml.html
##
## Step 1: inform Suricata about your network
##
vars:
# more specific is better for alert accuracy and performance
address-groups:
HOME_NET: "[192.168.0.0/16,10.0.0.0/8,172.16.0.0/12]"
#HOME_NET: "[192.168.0.0/16]"
#HOME_NET: "[10.0.0.0/8]"
#HOME_NET: "[172.16.0.0/12]"
#HOME_NET: "any"
EXTERNAL_NET: "!$HOME_NET"
#EXTERNAL_NET: "any"
HTTP_SERVERS: "$HOME_NET"
SMTP_SERVERS: "$HOME_NET"
SQL_SERVERS: "$HOME_NET"
DNS_SERVERS: "$HOME_NET"
TELNET_SERVERS: "$HOME_NET"
AIM_SERVERS: "$EXTERNAL_NET"
DC_SERVERS: "$HOME_NET"
DNP3_SERVER: "$HOME_NET"
DNP3_CLIENT: "$HOME_NET"
MODBUS_CLIENT: "$HOME_NET"
MODBUS_SERVER: "$HOME_NET"
ENIP_CLIENT: "$HOME_NET"
ENIP_SERVER: "$HOME_NET"
port-groups:
HTTP_PORTS: "80"
SHELLCODE_PORTS: "!80"
ORACLE_PORTS: 1521
SSH_PORTS: 22
DNP3_PORTS: 20000
MODBUS_PORTS: 502
FILE_DATA_PORTS: "[$HTTP_PORTS,110,143]"
FTP_PORTS: 21
VXLAN_PORTS: 4789
TEREDO_PORTS: 3544
##
## Step 2: select outputs to enable
##
# The default logging directory. Any log or output file will be
# placed here if its not specified with a full path name. This can be
# overridden with the -l command line parameter.
default-log-dir: @e_logdir@
# global stats configuration
stats:
enabled: yes
# The interval field (in seconds) controls at what interval
# the loggers are invoked.
interval: 8
# Add decode events as stats.
#decoder-events: true
# Decoder event prefix in stats. Has been 'decoder' before, but that leads
# to missing events in the eve.stats records. See issue #2225.
#decoder-events-prefix: "decoder.event"
# Add stream events as stats.
#stream-events: false
# Configure the type of alert (and other) logging you would like.
outputs:
# a line based alerts log similar to Snort's fast.log
- fast:
enabled: yes
filename: fast.log
append: yes
#filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
# Extensible Event Format (nicknamed EVE) event log in JSON format
- eve-log:
enabled: @e_enable_evelog@
filetype: regular #regular|syslog|unix_dgram|unix_stream|redis
filename: eve.json
#prefix: "@cee: " # prefix to prepend to each log entry
# the following are valid when type: syslog above
#identity: "suricata"
#facility: local5
#level: Info ## possible levels: Emergency, Alert, Critical,
## Error, Warning, Notice, Info, Debug
#redis:
# server: 127.0.0.1
# port: 6379
# async: true ## if redis replies are read asynchronously
# mode: list ## possible values: list|lpush (default), rpush, channel|publish
# ## lpush and rpush are using a Redis list. "list" is an alias for lpush
# ## publish is using a Redis channel. "channel" is an alias for publish
# key: suricata ## key or channel to use (default to suricata)
# Redis pipelining set up. This will enable to only do a query every
# 'batch-size' events. This should lower the latency induced by network
# connection at the cost of some memory. There is no flushing implemented
# so this setting as to be reserved to high traffic suricata.
# pipelining:
# enabled: yes ## set enable to yes to enable query pipelining
# batch-size: 10 ## number of entry to keep in buffer
# Include top level metadata. Default yes.
#metadata: no
# include the name of the input pcap file in pcap file processing mode
pcap-file: false
# Community Flow ID
# Adds a 'community_id' field to EVE records. These are meant to give
# a records a predictable flow id that can be used to match records to
# output of other tools such as Bro.
#
# Takes a 'seed' that needs to be same across sensors and tools
# to make the id less predictable.
# enable/disable the community id feature.
community-id: false
# Seed value for the ID output. Valid values are 0-65535.
community-id-seed: 0
# HTTP X-Forwarded-For support by adding an extra field or overwriting
# the source or destination IP address (depending on flow direction)
# with the one reported in the X-Forwarded-For HTTP header. This is
# helpful when reviewing alerts for traffic that is being reverse
# or forward proxied.
xff:
enabled: no
# Two operation modes are available, "extra-data" and "overwrite".
mode: extra-data
# Two proxy deployments are supported, "reverse" and "forward". In
# a "reverse" deployment the IP address used is the last one, in a
# "forward" deployment the first IP address is used.
deployment: reverse
# Header name where the actual IP address will be reported, if more
# than one IP address is present, the last IP address will be the
# one taken into consideration.
header: X-Forwarded-For
types:
- alert:
# payload: yes # enable dumping payload in Base64
# payload-buffer-size: 4kb # max size of payload buffer to output in eve-log
# payload-printable: yes # enable dumping payload in printable (lossy) format
# packet: yes # enable dumping of packet (without stream segments)
# metadata: no # enable inclusion of app layer metadata with alert. Default yes
# http-body: yes # Requires metadata; enable dumping of http body in Base64
# http-body-printable: yes # Requires metadata; enable dumping of http body in printable format
# Enable the logging of tagged packets for rules using the
# "tag" keyword.
tagged-packets: yes
- anomaly:
# Anomaly log records describe unexpected conditions such
# as truncated packets, packets with invalid IP/UDP/TCP
# length values, and other events that render the packet
# invalid for further processing or describe unexpected
# behavior on an established stream. Networks which
# experience high occurrences of anomalies may experience
# packet processing degradation.
#
# Anomalies are reported for the following:
# 1. Decode: Values and conditions that are detected while
# decoding individual packets. This includes invalid or
# unexpected values for low-level protocol lengths as well
# as stream related events (TCP 3-way handshake issues,
# unexpected sequence number, etc).
# 2. Stream: This includes stream related events (TCP
# 3-way handshake issues, unexpected sequence number,
# etc).
# 3. Application layer: These denote application layer
# specific conditions that are unexpected, invalid or are
# unexpected given the application monitoring state.
#
# By default, anomaly logging is disabled. When anomaly
# logging is enabled, applayer anomaly reporting is
# enabled.
enabled: yes
#
# Choose one or more types of anomaly logging and whether to enable
# logging of the packet header for packet anomalies.
types:
# decode: no
# stream: no
# applayer: yes
#packethdr: no
- http:
extended: yes # enable this for extended logging information
# custom allows additional http fields to be included in eve-log
# the example below adds three additional fields when uncommented
#custom: [Accept-Encoding, Accept-Language, Authorization]
# set this value to one and only one among {both, request, response}
# to dump all http headers for every http request and/or response
# dump-all-headers: none
- dns:
# This configuration uses the new DNS logging format,
# the old configuration is still available:
# https://suricata.readthedocs.io/en/latest/output/eve/eve-json-output.html#dns-v1-format
# As of Suricata 5.0, version 2 of the eve dns output
# format is the default.
#version: 2
# Enable/disable this logger. Default: enabled.
#enabled: yes
# Control logging of requests and responses:
# - requests: enable logging of DNS queries
# - responses: enable logging of DNS answers
# By default both requests and responses are logged.
#requests: no
#responses: no
# Format of answer logging:
# - detailed: array item per answer
# - grouped: answers aggregated by type
# Default: all
#formats: [detailed, grouped]
# Types to log, based on the query type.
# Default: all.
#types: [a, aaaa, cname, mx, ns, ptr, txt]
- tls:
extended: yes # enable this for extended logging information
# output TLS transaction where the session is resumed using a
# session id
#session-resumption: no
# custom allows to control which tls fields that are included
# in eve-log
#custom: [subject, issuer, session_resumed, serial, fingerprint, sni, version, not_before, not_after, certificate, chain, ja3, ja3s]
- files:
force-magic: no # force logging magic on all logged files
# force logging of checksums, available hash functions are md5,
# sha1 and sha256
#force-hash: [md5]
#- drop:
# alerts: yes # log alerts that caused drops
# flows: all # start or all: 'start' logs only a single drop
# # per flow direction. All logs each dropped pkt.
- smtp:
#extended: yes # enable this for extended logging information
# this includes: bcc, message-id, subject, x_mailer, user-agent
# custom fields logging from the list:
# reply-to, bcc, message-id, subject, x-mailer, user-agent, received,
# x-originating-ip, in-reply-to, references, importance, priority,
# sensitivity, organization, content-md5, date
#custom: [received, x-mailer, x-originating-ip, relays, reply-to, bcc]
# output md5 of fields: body, subject
# for the body you need to set app-layer.protocols.smtp.mime.body-md5
# to yes
#md5: [body, subject]
#- dnp3
- ftp
#- rdp
- nfs
- smb
- tftp
- ikev2
- krb5
- snmp
#- sip
- dhcp:
enabled: yes
# When extended mode is on, all DHCP messages are logged
# with full detail. When extended mode is off (the
# default), just enough information to map a MAC address
# to an IP address is logged.
extended: no
- ssh
- stats:
totals: yes # stats for all threads merged together
threads: no # per thread stats
deltas: no # include delta values
# bi-directional flows
- flow
# uni-directional flows
#- netflow
# Metadata event type. Triggered whenever a pktvar is saved
# and will include the pktvars, flowvars, flowbits and
# flowints.
#- metadata
# deprecated - unified2 alert format for use with Barnyard2
- unified2-alert:
enabled: no
# for further options see:
# https://suricata.readthedocs.io/en/suricata-5.0.0/configuration/suricata-yaml.html#alert-output-for-use-with-barnyard2-unified2-alert
# a line based log of HTTP requests (no alerts)
- http-log:
enabled: no
filename: http.log
append: yes
#extended: yes # enable this for extended logging information
#custom: yes # enabled the custom logging format (defined by customformat)
#customformat: "%{%D-%H:%M:%S}t.%z %{X-Forwarded-For}i %H %m %h %u %s %B %a:%p -> %A:%P"
#filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
# a line based log of TLS handshake parameters (no alerts)
- tls-log:
enabled: no # Log TLS connections.
filename: tls.log # File to store TLS logs.
append: yes
#extended: yes # Log extended information like fingerprint
#custom: yes # enabled the custom logging format (defined by customformat)
#customformat: "%{%D-%H:%M:%S}t.%z %a:%p -> %A:%P %v %n %d %D"
#filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
# output TLS transaction where the session is resumed using a
# session id
#session-resumption: no
# output module to store certificates chain to disk
- tls-store:
enabled: no
#certs-log-dir: certs # directory to store the certificates files
# Packet log... log packets in pcap format. 3 modes of operation: "normal"
# "multi" and "sguil".
#
# In normal mode a pcap file "filename" is created in the default-log-dir,
# or are as specified by "dir".
# In multi mode, a file is created per thread. This will perform much
# better, but will create multiple files where 'normal' would create one.
# In multi mode the filename takes a few special variables:
# - %n -- thread number
# - %i -- thread id
# - %t -- timestamp (secs or secs.usecs based on 'ts-format'
# E.g. filename: pcap.%n.%t
#
# Note that it's possible to use directories, but the directories are not
# created by Suricata. E.g. filename: pcaps/%n/log.%s will log into the
# per thread directory.
#
# Also note that the limit and max-files settings are enforced per thread.
# So the size limit when using 8 threads with 1000mb files and 2000 files
# is: 8*1000*2000 ~ 16TiB.
#
# In Sguil mode "dir" indicates the base directory. In this base dir the
# pcaps are created in th directory structure Sguil expects:
#
# $sguil-base-dir/YYYY-MM-DD/$filename.<timestamp>
#
# By default all packets are logged except:
# - TCP streams beyond stream.reassembly.depth
# - encrypted streams after the key exchange
#
- pcap-log:
enabled: no
filename: log.pcap
# File size limit. Can be specified in kb, mb, gb. Just a number
# is parsed as bytes.
limit: 1000mb
# If set to a value will enable ring buffer mode. Will keep Maximum of "max-files" of size "limit"
max-files: 2000
# Compression algorithm for pcap files. Possible values: none, lz4.
# Enabling compression is incompatible with the sguil mode. Note also
# that on Windows, enabling compression will *increase* disk I/O.
compression: none
# Further options for lz4 compression. The compression level can be set
# to a value between 0 and 16, where higher values result in higher
# compression.
#lz4-checksum: no
#lz4-level: 0
mode: normal # normal, multi or sguil.
# Directory to place pcap files. If not provided the default log
# directory will be used. Required for "sguil" mode.
#dir: /nsm_data/
#ts-format: usec # sec or usec second format (default) is filename.sec usec is filename.sec.usec
use-stream-depth: no #If set to "yes" packets seen after reaching stream inspection depth are ignored. "no" logs all packets
honor-pass-rules: no # If set to "yes", flows in which a pass rule matched will stopped being logged.
# a full alerts log containing much information for signature writers
# or for investigating suspected false positives.
- alert-debug:
enabled: no
filename: alert-debug.log
append: yes
#filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
# alert output to prelude (https://www.prelude-siem.org/) only
# available if Suricata has been compiled with --enable-prelude
- alert-prelude:
enabled: no
profile: suricata
log-packet-content: no
log-packet-header: yes
# Stats.log contains data from various counters of the Suricata engine.
- stats:
enabled: yes
filename: stats.log
append: yes # append to file (yes) or overwrite it (no)
totals: yes # stats for all threads merged together
threads: no # per thread stats
#null-values: yes # print counters that have value 0
# a line based alerts log similar to fast.log into syslog
- syslog:
enabled: no
# reported identity to syslog. If ommited the program name (usually
# suricata) will be used.
#identity: "suricata"
facility: local5
#level: Info ## possible levels: Emergency, Alert, Critical,
## Error, Warning, Notice, Info, Debug
# deprecated a line based information for dropped packets in IPS mode
- drop:
enabled: no
# further options documented at:
# https://suricata.readthedocs.io/en/suricata-5.0.0/configuration/suricata-yaml.html#drop-log-a-line-based-information-for-dropped-packets
# Output module for storing files on disk. Files are stored in a
# directory names consisting of the first 2 characters of the
# SHA256 of the file. Each file is given its SHA256 as a filename.
#
# When a duplicate file is found, the existing file is touched to
# have its timestamps updated.
#
# Unlike the older filestore, metadata is not written out by default
# as each file should already have a "fileinfo" record in the
# eve.log. If write-fileinfo is set to yes, the each file will have
# one more associated .json files that consists of the fileinfo
# record. A fileinfo file will be written for each occurrence of the
# file seen using a filename suffix to ensure uniqueness.
#
# To prune the filestore directory see the "suricatactl filestore
# prune" command which can delete files over a certain age.
- file-store:
version: 2
enabled: no
# Set the directory for the filestore. If the path is not
# absolute will be be relative to the default-log-dir.
#dir: filestore
# Write out a fileinfo record for each occurrence of a
# file. Disabled by default as each occurrence is already logged
# as a fileinfo record to the main eve-log.
#write-fileinfo: yes
# Force storing of all files. Default: no.
#force-filestore: yes
# Override the global stream-depth for sessions in which we want
# to perform file extraction. Set to 0 for unlimited.
#stream-depth: 0
# Uncomment the following variable to define how many files can
# remain open for filestore by Suricata. Default value is 0 which
# means files get closed after each write
#max-open-files: 1000
# Force logging of checksums, available hash functions are md5,
# sha1 and sha256. Note that SHA256 is automatically forced by
# the use of this output module as it uses the SHA256 as the
# file naming scheme.
#force-hash: [sha1, md5]
# NOTE: X-Forwarded configuration is ignored if write-fileinfo is disabled
# HTTP X-Forwarded-For support by adding an extra field or overwriting
# the source or destination IP address (depending on flow direction)
# with the one reported in the X-Forwarded-For HTTP header. This is
# helpful when reviewing alerts for traffic that is being reverse
# or forward proxied.
xff:
enabled: no
# Two operation modes are available, "extra-data" and "overwrite".
mode: extra-data
# Two proxy deployments are supported, "reverse" and "forward". In
# a "reverse" deployment the IP address used is the last one, in a
# "forward" deployment the first IP address is used.
deployment: reverse
# Header name where the actual IP address will be reported, if more
# than one IP address is present, the last IP address will be the
# one taken into consideration.
header: X-Forwarded-For
# deprecated - file-store v1
- file-store:
enabled: no
# further options documented at:
# https://suricata.readthedocs.io/en/suricata-5.0.0/file-extraction/file-extraction.html#file-store-version-1
# Log TCP data after stream normalization
# 2 types: file or dir. File logs into a single logfile. Dir creates
# 2 files per TCP session and stores the raw TCP data into them.
# Using 'both' will enable both file and dir modes.
#
# Note: limited by stream.reassembly.depth
- tcp-data:
enabled: no
type: file
filename: tcp-data.log
# Log HTTP body data after normalization, dechunking and unzipping.
# 2 types: file or dir. File logs into a single logfile. Dir creates
# 2 files per HTTP session and stores the normalized data into them.
# Using 'both' will enable both file and dir modes.
#
# Note: limited by the body limit settings
- http-body-data:
enabled: no
type: file
filename: http-data.log
# Lua Output Support - execute lua script to generate alert and event
# output.
# Documented at:
# https://suricata.readthedocs.io/en/latest/output/lua-output.html
- lua:
enabled: no
#scripts-dir: /etc/suricata/lua-output/
scripts:
# - script1.lua
# Logging configuration. This is not about logging IDS alerts/events, but
# output about what Suricata is doing, like startup messages, errors, etc.
logging:
# The default log level, can be overridden in an output section.
# Note that debug level logging will only be emitted if Suricata was
# compiled with the --enable-debug configure option.
#
# This value is overridden by the SC_LOG_LEVEL env var.
default-log-level: notice
# The default output format. Optional parameter, should default to
# something reasonable if not provided. Can be overridden in an
# output section. You can leave this out to get the default.
#
# This value is overridden by the SC_LOG_FORMAT env var.
#default-log-format: "[%i] %t - (%f:%l) <%d> (%n) -- "
# A regex to filter output. Can be overridden in an output section.
# Defaults to empty (no filter).
#
# This value is overridden by the SC_LOG_OP_FILTER env var.
default-output-filter:
# Define your logging outputs. If none are defined, or they are all
# disabled you will get the default - console output.
outputs:
- console:
enabled: yes
# type: json
- file:
enabled: yes
level: info
filename: suricata.log
# type: json
- syslog:
enabled: no
facility: local5
format: "[%i] <%d> -- "
# type: json
##
## Step 4: configure common capture settings
##
## See "Advanced Capture Options" below for more options, including NETMAP
## and PF_RING.
##
# Linux high speed capture support
af-packet:
- interface: eth0
# Number of receive threads. "auto" uses the number of cores
#threads: auto
# Default clusterid. AF_PACKET will load balance packets based on flow.
cluster-id: 99
# Default AF_PACKET cluster type. AF_PACKET can load balance per flow or per hash.
# This is only supported for Linux kernel > 3.1
# possible value are:
# * cluster_flow: all packets of a given flow are send to the same socket
# * cluster_cpu: all packets treated in kernel by a CPU are send to the same socket
# * cluster_qm: all packets linked by network card to a RSS queue are sent to the same
# socket. Requires at least Linux 3.14.
# * cluster_ebpf: eBPF file load balancing. See doc/userguide/capture-hardware/ebpf-xdp.rst for
# more info.
# Recommended modes are cluster_flow on most boxes and cluster_cpu or cluster_qm on system
# with capture card using RSS (require cpu affinity tuning and system irq tuning)
cluster-type: cluster_flow
# In some fragmentation case, the hash can not be computed. If "defrag" is set
# to yes, the kernel will do the needed defragmentation before sending the packets.
defrag: yes
# To use the ring feature of AF_PACKET, set 'use-mmap' to yes
#use-mmap: yes
# Lock memory map to avoid it goes to swap. Be careful that over subscribing could lock
# your system
#mmap-locked: yes
# Use tpacket_v3 capture mode, only active if use-mmap is true
# Don't use it in IPS or TAP mode as it causes severe latency
#tpacket-v3: yes
# Ring size will be computed with respect to max_pending_packets and number
# of threads. You can set manually the ring size in number of packets by setting
# the following value. If you are using flow cluster-type and have really network
# intensive single-flow you could want to set the ring-size independently of the number
# of threads:
#ring-size: 2048
# Block size is used by tpacket_v3 only. It should set to a value high enough to contain
# a decent number of packets. Size is in bytes so please consider your MTU. It should be
# a power of 2 and it must be multiple of page size (usually 4096).
#block-size: 32768
# tpacket_v3 block timeout: an open block is passed to userspace if it is not
# filled after block-timeout milliseconds.
#block-timeout: 10
# On busy system, this could help to set it to yes to recover from a packet drop
# phase. This will result in some packets (at max a ring flush) being non treated.
#use-emergency-flush: yes
# recv buffer size, increase value could improve performance
# buffer-size: 32768
# Set to yes to disable promiscuous mode
# disable-promisc: no
# Choose checksum verification mode for the interface. At the moment
# of the capture, some packets may be with an invalid checksum due to
# offloading to the network card of the checksum computation.
# Possible values are:
# - kernel: use indication sent by kernel for each packet (default)
# - yes: checksum validation is forced
# - no: checksum validation is disabled
# - auto: suricata uses a statistical approach to detect when
# checksum off-loading is used.
# Warning: 'checksum-validation' must be set to yes to have any validation
#checksum-checks: kernel
# BPF filter to apply to this interface. The pcap filter syntax apply here.
#bpf-filter: port 80 or udp
# You can use the following variables to activate AF_PACKET tap or IPS mode.
# If copy-mode is set to ips or tap, the traffic coming to the current
# interface will be copied to the copy-iface interface. If 'tap' is set, the
# copy is complete. If 'ips' is set, the packet matching a 'drop' action
# will not be copied.
#copy-mode: ips
#copy-iface: eth1
# For eBPF and XDP setup including bypass, filter and load balancing, please
# see doc/userguide/capture-hardware/ebpf-xdp.rst for more info.
# Put default values here. These will be used for an interface that is not
# in the list above.
- interface: default
#threads: auto
#use-mmap: no
#tpacket-v3: yes
# Cross platform libpcap capture support
pcap:
- interface: eth0
# On Linux, pcap will try to use mmaped capture and will use buffer-size
# as total of memory used by the ring. So set this to something bigger
# than 1% of your bandwidth.
#buffer-size: 16777216
#bpf-filter: "tcp and port 25"
# Choose checksum verification mode for the interface. At the moment
# of the capture, some packets may be with an invalid checksum due to
# offloading to the network card of the checksum computation.
# Possible values are:
# - yes: checksum validation is forced
# - no: checksum validation is disabled
# - auto: Suricata uses a statistical approach to detect when
# checksum off-loading is used. (default)
# Warning: 'checksum-validation' must be set to yes to have any validation
#checksum-checks: auto
# With some accelerator cards using a modified libpcap (like myricom), you
# may want to have the same number of capture threads as the number of capture
# rings. In this case, set up the threads variable to N to start N threads
# listening on the same interface.
#threads: 16
# set to no to disable promiscuous mode:
#promisc: no
# set snaplen, if not set it defaults to MTU if MTU can be known
# via ioctl call and to full capture if not.
#snaplen: 1518
# Put default values here
- interface: default
#checksum-checks: auto
# Settings for reading pcap files
pcap-file:
# Possible values are:
# - yes: checksum validation is forced
# - no: checksum validation is disabled
# - auto: Suricata uses a statistical approach to detect when
# checksum off-loading is used. (default)
# Warning: 'checksum-validation' must be set to yes to have checksum tested
checksum-checks: auto
# See "Advanced Capture Options" below for more options, including NETMAP
# and PF_RING.
##
## Step 5: App Layer Protocol Configuration
##
# Configure the app-layer parsers. The protocols section details each
# protocol.
#
# The option "enabled" takes 3 values - "yes", "no", "detection-only".
# "yes" enables both detection and the parser, "no" disables both, and
# "detection-only" enables protocol detection only (parser disabled).
app-layer:
protocols:
krb5:
enabled: yes
snmp:
enabled: yes
ikev2:
enabled: yes
tls:
enabled: yes
detection-ports:
dp: 443
# Generate JA3 fingerprint from client hello. If not specified it
# will be disabled by default, but enabled if rules require it.
#ja3-fingerprints: auto
# What to do when the encrypted communications start:
# - default: keep tracking TLS session, check for protocol anomalies,
# inspect tls_* keywords. Disables inspection of unmodified
# 'content' signatures.
# - bypass: stop processing this flow as much as possible. No further
# TLS parsing and inspection. Offload flow bypass to kernel
# or hardware if possible.
# - full: keep tracking and inspection as normal. Unmodified content
# keyword signatures are inspected as well.
#
# For best performance, select 'bypass'.
#
#encryption-handling: default
dcerpc:
enabled: yes
ftp:
enabled: yes
# memcap: 64mb
# RDP, disabled by default.
rdp:
#enabled: no
ssh:
enabled: yes
smtp:
enabled: yes
raw-extraction: no
# Configure SMTP-MIME Decoder
mime:
# Decode MIME messages from SMTP transactions
# (may be resource intensive)
# This field supercedes all others because it turns the entire
# process on or off
decode-mime: yes
# Decode MIME entity bodies (ie. base64, quoted-printable, etc.)
decode-base64: yes
decode-quoted-printable: yes
# Maximum bytes per header data value stored in the data structure
# (default is 2000)
header-value-depth: 2000
# Extract URLs and save in state data structure
extract-urls: yes
# Set to yes to compute the md5 of the mail body. You will then
# be able to journalize it.
body-md5: no
# Configure inspected-tracker for file_data keyword
inspected-tracker:
content-limit: 100000
content-inspect-min-size: 32768
content-inspect-window: 4096
imap:
enabled: detection-only
smb:
enabled: yes
detection-ports:
dp: 139, 445
# Stream reassembly size for SMB streams. By default track it completely.
#stream-depth: 0
nfs:
enabled: yes
tftp:
enabled: yes
dns:
# memcaps. Globally and per flow/state.
#global-memcap: 16mb
#state-memcap: 512kb
# How many unreplied DNS requests are considered a flood.
# If the limit is reached, app-layer-event:dns.flooded; will match.
#request-flood: 500
tcp:
enabled: yes
detection-ports:
dp: 53
udp:
enabled: yes
detection-ports:
dp: 53
http:
enabled: yes
# memcap: Maximum memory capacity for http
# Default is unlimited, value can be such as 64mb
# default-config: Used when no server-config matches
# personality: List of personalities used by default
# request-body-limit: Limit reassembly of request body for inspection
# by http_client_body & pcre /P option.
# response-body-limit: Limit reassembly of response body for inspection
# by file_data, http_server_body & pcre /Q option.
#
# For advanced options, see the user guide
# server-config: List of server configurations to use if address matches
# address: List of IP addresses or networks for this block
# personalitiy: List of personalities used by this block
#
# Then, all the fields from default-config can be overloaded
#
# Currently Available Personalities:
# Minimal, Generic, IDS (default), IIS_4_0, IIS_5_0, IIS_5_1, IIS_6_0,
# IIS_7_0, IIS_7_5, Apache_2
libhtp:
default-config:
personality: IDS
# Can be specified in kb, mb, gb. Just a number indicates
# it's in bytes.
request-body-limit: 100kb
response-body-limit: 100kb
# inspection limits
request-body-minimal-inspect-size: 32kb
request-body-inspect-window: 4kb
response-body-minimal-inspect-size: 40kb
response-body-inspect-window: 16kb
# response body decompression (0 disables)
response-body-decompress-layer-limit: 2
# auto will use http-body-inline mode in IPS mode, yes or no set it statically
http-body-inline: auto
# Decompress SWF files.
# 2 types: 'deflate', 'lzma', 'both' will decompress deflate and lzma
# compress-depth:
# Specifies the maximum amount of data to decompress,
# set 0 for unlimited.
# decompress-depth:
# Specifies the maximum amount of decompressed data to obtain,
# set 0 for unlimited.
swf-decompression:
enabled: yes
type: both
compress-depth: 0
decompress-depth: 0
# Take a random value for inspection sizes around the specified value.
# This lower the risk of some evasion technics but could lead
# detection change between runs. It is set to 'yes' by default.
#randomize-inspection-sizes: yes
# If randomize-inspection-sizes is active, the value of various
# inspection size will be choosen in the [1 - range%, 1 + range%]
# range
# Default value of randomize-inspection-range is 10.
#randomize-inspection-range: 10
# decoding
double-decode-path: no
double-decode-query: no
# Can disable LZMA decompression
#lzma-enabled: yes
# Memory limit usage for LZMA decompression dictionary
# Data is decompressed until dictionary reaches this size
#lzma-memlimit: 1mb
# Maximum decompressed size with a compression ratio
# above 2048 (only LZMA can reach this ratio, deflate cannot)
#compression-bomb-limit: 1mb
server-config:
#- apache:
# address: [192.168.1.0/24, 127.0.0.0/8, "::1"]
# personality: Apache_2
# # Can be specified in kb, mb, gb. Just a number indicates
# # it's in bytes.
# request-body-limit: 4096
# response-body-limit: 4096
# double-decode-path: no
# double-decode-query: no
#- iis7:
# address:
# - 192.168.0.0/24
# - 192.168.10.0/24
# personality: IIS_7_0
# # Can be specified in kb, mb, gb. Just a number indicates
# # it's in bytes.
# request-body-limit: 4096
# response-body-limit: 4096
# double-decode-path: no
# double-decode-query: no
# Note: Modbus probe parser is minimalist due to the poor significant field
# Only Modbus message length (greater than Modbus header length)
# And Protocol ID (equal to 0) are checked in probing parser
# It is important to enable detection port and define Modbus port
# to avoid false positive
modbus:
# How many unreplied Modbus requests are considered a flood.
# If the limit is reached, app-layer-event:modbus.flooded; will match.
#request-flood: 500
enabled: no
detection-ports:
dp: 502
# According to MODBUS Messaging on TCP/IP Implementation Guide V1.0b, it
# is recommended to keep the TCP connection opened with a remote device
# and not to open and close it for each MODBUS/TCP transaction. In that
# case, it is important to set the depth of the stream reassembling as
# unlimited (stream.reassembly.depth: 0)
# Stream reassembly size for modbus. By default track it completely.
stream-depth: 0
# DNP3
dnp3:
enabled: no
detection-ports:
dp: 20000
# SCADA EtherNet/IP and CIP protocol support
enip:
enabled: no
detection-ports:
dp: 44818
sp: 44818
ntp:
enabled: yes
dhcp:
enabled: yes
# SIP, disabled by default.
sip:
#enabled: no
# Limit for the maximum number of asn1 frames to decode (default 256)
asn1-max-frames: 256
##############################################################################
##
## Advanced settings below
##
##############################################################################
##
## Run Options
##
# Run suricata as user and group.
#run-as:
# user: suri
# group: suri
# Some logging module will use that name in event as identifier. The default
# value is the hostname
#sensor-name: suricata
# Default location of the pid file. The pid file is only used in
# daemon mode (start Suricata with -D). If not running in daemon mode
# the --pidfile command line option must be used to create a pid file.
#pid-file: @e_rundir@suricata.pid
# Daemon working directory
# Suricata will change directory to this one if provided
# Default: "/"
#daemon-directory: "/"
# Umask.
# Suricata will use this umask if it is provided. By default it will use the
# umask passed on by the shell.
#umask: 022
# Suricata core dump configuration. Limits the size of the core dump file to
# approximately max-dump. The actual core dump size will be a multiple of the
# page size. Core dumps that would be larger than max-dump are truncated. On
# Linux, the actual core dump size may be a few pages larger than max-dump.
# Setting max-dump to 0 disables core dumping.
# Setting max-dump to 'unlimited' will give the full core dump file.
# On 32-bit Linux, a max-dump value >= ULONG_MAX may cause the core dump size
# to be 'unlimited'.
coredump:
max-dump: unlimited
# If Suricata box is a router for the sniffed networks, set it to 'router'. If
# it is a pure sniffing setup, set it to 'sniffer-only'.
# If set to auto, the variable is internally switch to 'router' in IPS mode
# and 'sniffer-only' in IDS mode.
# This feature is currently only used by the reject* keywords.
host-mode: auto
# Number of packets preallocated per thread. The default is 1024. A higher number
# will make sure each CPU will be more easily kept busy, but may negatively
# impact caching.
#max-pending-packets: 1024
# Runmode the engine should use. Please check --list-runmodes to get the available
# runmodes for each packet acquisition method. Default depends on selected capture
# method. 'workers' generally gives best performance.
#runmode: autofp
# Specifies the kind of flow load balancer used by the flow pinned autofp mode.
#
# Supported schedulers are:
#
# hash - Flow assigned to threads using the 5-7 tuple hash.
# ippair - Flow assigned to threads using addresses only.
#
#autofp-scheduler: hash
# Preallocated size for packet. Default is 1514 which is the classical
# size for pcap on ethernet. You should adjust this value to the highest
# packet size (MTU + hardware header) on your system.
#default-packet-size: 1514
# Unix command socket can be used to pass commands to Suricata.
# An external tool can then connect to get information from Suricata
# or trigger some modifications of the engine. Set enabled to yes
# to activate the feature. In auto mode, the feature will only be
# activated in live capture mode. You can use the filename variable to set
# the file name of the socket.
unix-command:
enabled: auto
#filename: custom.socket
# Magic file. The extension .mgc is added to the value here.
#magic-file: /usr/share/file/magic
@e_magic_file_comment@magic-file: @e_magic_file@
# GeoIP2 database file. Specify path and filename of GeoIP2 database
# if using rules with "geoip" rule option.
#geoip-database: /usr/local/share/GeoLite2/GeoLite2-Country.mmdb
legacy:
uricontent: enabled
##
## Detection settings
##
# Set the order of alerts based on actions
# The default order is pass, drop, reject, alert
# action-order:
# - pass
# - drop
# - reject
# - alert
# IP Reputation
#reputation-categories-file: @e_sysconfdir@iprep/categories.txt
#default-reputation-path: @e_sysconfdir@iprep
#reputation-files:
# - reputation.list
# When run with the option --engine-analysis, the engine will read each of
# the parameters below, and print reports for each of the enabled sections
# and exit. The reports are printed to a file in the default log dir
# given by the parameter "default-log-dir", with engine reporting
# subsection below printing reports in its own report file.
engine-analysis:
# enables printing reports for fast-pattern for every rule.
rules-fast-pattern: yes
# enables printing reports for each rule
rules: yes
#recursion and match limits for PCRE where supported
pcre:
match-limit: 3500
match-limit-recursion: 1500
##
## Advanced Traffic Tracking and Reconstruction Settings
##
# Host specific policies for defragmentation and TCP stream
# reassembly. The host OS lookup is done using a radix tree, just
# like a routing table so the most specific entry matches.
host-os-policy:
# Make the default policy windows.
windows: [0.0.0.0/0]
bsd: []
bsd-right: []
old-linux: []
linux: []
old-solaris: []
solaris: []
hpux10: []
hpux11: []
irix: []
macos: []
vista: []
windows2k3: []
# Defrag settings:
defrag:
memcap: 32mb
hash-size: 65536
trackers: 65535 # number of defragmented flows to follow
max-frags: 65535 # number of fragments to keep (higher than trackers)
prealloc: yes
timeout: 60
# Enable defrag per host settings
# host-config:
#
# - dmz:
# timeout: 30
# address: [192.168.1.0/24, 127.0.0.0/8, 1.1.1.0/24, 2.2.2.0/24, "1.1.1.1", "2.2.2.2", "::1"]
#
# - lan:
# timeout: 45
# address:
# - 192.168.0.0/24
# - 192.168.10.0/24
# - 172.16.14.0/24
# Flow settings:
# By default, the reserved memory (memcap) for flows is 32MB. This is the limit
# for flow allocation inside the engine. You can change this value to allow
# more memory usage for flows.
# The hash-size determine the size of the hash used to identify flows inside
# the engine, and by default the value is 65536.
# At the startup, the engine can preallocate a number of flows, to get a better
# performance. The number of flows preallocated is 10000 by default.
# emergency-recovery is the percentage of flows that the engine need to
# prune before unsetting the emergency state. The emergency state is activated
# when the memcap limit is reached, allowing to create new flows, but
# pruning them with the emergency timeouts (they are defined below).
# If the memcap is reached, the engine will try to prune flows
# with the default timeouts. If it doesn't find a flow to prune, it will set
# the emergency bit and it will try again with more aggressive timeouts.
# If that doesn't work, then it will try to kill the last time seen flows
# not in use.
# The memcap can be specified in kb, mb, gb. Just a number indicates it's
# in bytes.
flow:
memcap: 128mb
hash-size: 65536
prealloc: 10000
emergency-recovery: 30
#managers: 1 # default to one flow manager
#recyclers: 1 # default to one flow recycler thread
# This option controls the use of vlan ids in the flow (and defrag)
# hashing. Normally this should be enabled, but in some (broken)
# setups where both sides of a flow are not tagged with the same vlan
# tag, we can ignore the vlan id's in the flow hashing.
vlan:
use-for-tracking: true
# Specific timeouts for flows. Here you can specify the timeouts that the
# active flows will wait to transit from the current state to another, on each
# protocol. The value of "new" determine the seconds to wait after a handshake or
# stream startup before the engine free the data of that flow it doesn't
# change the state to established (usually if we don't receive more packets
# of that flow). The value of "established" is the amount of
# seconds that the engine will wait to free the flow if it spend that amount
# without receiving new packets or closing the connection. "closed" is the
# amount of time to wait after a flow is closed (usually zero). "bypassed"
# timeout controls locally bypassed flows. For these flows we don't do any other
# tracking. If no packets have been seen after this timeout, the flow is discarded.
#
# There's an emergency mode that will become active under attack circumstances,
# making the engine to check flow status faster. This configuration variables
# use the prefix "emergency-" and work similar as the normal ones.
# Some timeouts doesn't apply to all the protocols, like "closed", for udp and
# icmp.
flow-timeouts:
default:
new: 30
established: 300
closed: 0
bypassed: 100
emergency-new: 10
emergency-established: 100
emergency-closed: 0
emergency-bypassed: 50
tcp:
new: 60
established: 600
closed: 60
bypassed: 100
emergency-new: 5
emergency-established: 100
emergency-closed: 10
emergency-bypassed: 50
udp:
new: 30
established: 300
bypassed: 100
emergency-new: 10
emergency-established: 100
emergency-bypassed: 50
icmp:
new: 30
established: 300
bypassed: 100
emergency-new: 10
emergency-established: 100
emergency-bypassed: 50
# Stream engine settings. Here the TCP stream tracking and reassembly
# engine is configured.
#
# stream:
# memcap: 32mb # Can be specified in kb, mb, gb. Just a
# # number indicates it's in bytes.
# checksum-validation: yes # To validate the checksum of received
# # packet. If csum validation is specified as
# # "yes", then packet with invalid csum will not
# # be processed by the engine stream/app layer.
# # Warning: locally generated traffic can be
# # generated without checksum due to hardware offload
# # of checksum. You can control the handling of checksum
# # on a per-interface basis via the 'checksum-checks'
# # option
# prealloc-sessions: 2k # 2k sessions prealloc'd per stream thread
# midstream: false # don't allow midstream session pickups
# async-oneside: false # don't enable async stream handling
# inline: no # stream inline mode
# drop-invalid: yes # in inline mode, drop packets that are invalid with regards to streaming engine
# max-synack-queued: 5 # Max different SYN/ACKs to queue
# bypass: no # Bypass packets when stream.reassembly.depth is reached.
# # Warning: first side to reach this triggers
# # the bypass.
#
# reassembly:
# memcap: 64mb # Can be specified in kb, mb, gb. Just a number
# # indicates it's in bytes.
# depth: 1mb # Can be specified in kb, mb, gb. Just a number
# # indicates it's in bytes.
# toserver-chunk-size: 2560 # inspect raw stream in chunks of at least
# # this size. Can be specified in kb, mb,
# # gb. Just a number indicates it's in bytes.
# toclient-chunk-size: 2560 # inspect raw stream in chunks of at least
# # this size. Can be specified in kb, mb,
# # gb. Just a number indicates it's in bytes.
# randomize-chunk-size: yes # Take a random value for chunk size around the specified value.
# # This lower the risk of some evasion technics but could lead
# # detection change between runs. It is set to 'yes' by default.
# randomize-chunk-range: 10 # If randomize-chunk-size is active, the value of chunk-size is
# # a random value between (1 - randomize-chunk-range/100)*toserver-chunk-size
# # and (1 + randomize-chunk-range/100)*toserver-chunk-size and the same
# # calculation for toclient-chunk-size.
# # Default value of randomize-chunk-range is 10.
#
# raw: yes # 'Raw' reassembly enabled or disabled.
# # raw is for content inspection by detection
# # engine.
#
# segment-prealloc: 2048 # number of segments preallocated per thread
#
# check-overlap-different-data: true|false
# # check if a segment contains different data
# # than what we've already seen for that
# # position in the stream.
# # This is enabled automatically if inline mode
# # is used or when stream-event:reassembly_overlap_different_data;
# # is used in a rule.
#
stream:
memcap: 64mb
checksum-validation: yes # reject wrong csums
inline: auto # auto will use inline mode in IPS mode, yes or no set it statically
reassembly:
memcap: 256mb
depth: 1mb # reassemble 1mb into a stream
toserver-chunk-size: 2560
toclient-chunk-size: 2560
randomize-chunk-size: yes
#randomize-chunk-range: 10
#raw: yes
#segment-prealloc: 2048
#check-overlap-different-data: true
# Host table:
#
# Host table is used by tagging and per host thresholding subsystems.
#
host:
hash-size: 4096
prealloc: 1000
memcap: 32mb
# IP Pair table:
#
# Used by xbits 'ippair' tracking.
#
#ippair:
# hash-size: 4096
# prealloc: 1000
# memcap: 32mb
# Decoder settings
decoder:
# Teredo decoder is known to not be completely accurate
# as it will sometimes detect non-teredo as teredo.
teredo:
enabled: true
# ports to look for Teredo. Max 4 ports. If no ports are given, or
# the value is set to 'any', Teredo detection runs on _all_ UDP packets.
ports: $TEREDO_PORTS # syntax: '[3544, 1234]' or '3533' or 'any'.
# VXLAN decoder is assigned to up to 4 UDP ports. By default only the
# IANA assigned port 4789 is enabled.
vxlan:
enabled: true
ports: $VXLAN_PORTS # syntax: '8472, 4789'
# ERSPAN Type I decode support
erspan:
typeI:
enabled: false
##
## Performance tuning and profiling
##
# The detection engine builds internal groups of signatures. The engine
# allow us to specify the profile to use for them, to manage memory on an
# efficient way keeping a good performance. For the profile keyword you
# can use the words "low", "medium", "high" or "custom". If you use custom
# make sure to define the values at "- custom-values" as your convenience.
# Usually you would prefer medium/high/low.
#
# "sgh mpm-context", indicates how the staging should allot mpm contexts for
# the signature groups. "single" indicates the use of a single context for
# all the signature group heads. "full" indicates a mpm-context for each
# group head. "auto" lets the engine decide the distribution of contexts
# based on the information the engine gathers on the patterns from each
# group head.
#
# The option inspection-recursion-limit is used to limit the recursive calls
# in the content inspection code. For certain payload-sig combinations, we
# might end up taking too much time in the content inspection code.
# If the argument specified is 0, the engine uses an internally defined
# default limit. On not specifying a value, we use no limits on the recursion.
detect:
profile: medium
custom-values:
toclient-groups: 3
toserver-groups: 25
sgh-mpm-context: auto
inspection-recursion-limit: 3000
# If set to yes, the loading of signatures will be made after the capture
# is started. This will limit the downtime in IPS mode.
#delayed-detect: yes
prefilter:
# default prefiltering setting. "mpm" only creates MPM/fast_pattern
# engines. "auto" also sets up prefilter engines for other keywords.
# Use --list-keywords=all to see which keywords support prefiltering.
default: mpm
# the grouping values above control how many groups are created per
# direction. Port whitelisting forces that port to get it's own group.
# Very common ports will benefit, as well as ports with many expensive
# rules.
grouping:
#tcp-whitelist: 53, 80, 139, 443, 445, 1433, 3306, 3389, 6666, 6667, 8080
#udp-whitelist: 53, 135, 5060
profiling:
# Log the rules that made it past the prefilter stage, per packet
# default is off. The threshold setting determines how many rules
# must have made it past pre-filter for that rule to trigger the
# logging.
#inspect-logging-threshold: 200
grouping:
dump-to-disk: false
include-rules: false # very verbose
include-mpm-stats: false
# Select the multi pattern algorithm you want to run for scan/search the
# in the engine.
#
# The supported algorithms are:
# "ac" - Aho-Corasick, default implementation
# "ac-bs" - Aho-Corasick, reduced memory implementation
# "ac-ks" - Aho-Corasick, "Ken Steele" variant
# "hs" - Hyperscan, available when built with Hyperscan support
#
# The default mpm-algo value of "auto" will use "hs" if Hyperscan is
# available, "ac" otherwise.
#
# The mpm you choose also decides the distribution of mpm contexts for
# signature groups, specified by the conf - "detect.sgh-mpm-context".
# Selecting "ac" as the mpm would require "detect.sgh-mpm-context"
# to be set to "single", because of ac's memory requirements, unless the
# ruleset is small enough to fit in one's memory, in which case one can
# use "full" with "ac". Rest of the mpms can be run in "full" mode.
mpm-algo: auto
# Select the matching algorithm you want to use for single-pattern searches.
#
# Supported algorithms are "bm" (Boyer-Moore) and "hs" (Hyperscan, only
# available if Suricata has been built with Hyperscan support).
#
# The default of "auto" will use "hs" if available, otherwise "bm".
spm-algo: auto
# Suricata is multi-threaded. Here the threading can be influenced.
threading:
set-cpu-affinity: no
# Tune cpu affinity of threads. Each family of threads can be bound
# on specific CPUs.
#
# These 2 apply to the all runmodes:
# management-cpu-set is used for flow timeout handling, counters
# worker-cpu-set is used for 'worker' threads
#
# Additionally, for autofp these apply:
# receive-cpu-set is used for capture threads
# verdict-cpu-set is used for IPS verdict threads
#
cpu-affinity:
- management-cpu-set:
cpu: [ 0 ] # include only these CPUs in affinity settings
- receive-cpu-set:
cpu: [ 0 ] # include only these CPUs in affinity settings
- worker-cpu-set:
cpu: [ "all" ]
mode: "exclusive"
# Use explicitely 3 threads and don't compute number by using
# detect-thread-ratio variable:
# threads: 3
prio:
low: [ 0 ]
medium: [ "1-2" ]
high: [ 3 ]
default: "medium"
#- verdict-cpu-set:
# cpu: [ 0 ]
# prio:
# default: "high"
#
# By default Suricata creates one "detect" thread per available CPU/CPU core.
# This setting allows controlling this behaviour. A ratio setting of 2 will
# create 2 detect threads for each CPU/CPU core. So for a dual core CPU this
# will result in 4 detect threads. If values below 1 are used, less threads
# are created. So on a dual core CPU a setting of 0.5 results in 1 detect
# thread being created. Regardless of the setting at a minimum 1 detect
# thread will always be created.
#
detect-thread-ratio: 1.0
# Luajit has a strange memory requirement, it's 'states' need to be in the
# first 2G of the process' memory.
#
# 'luajit.states' is used to control how many states are preallocated.
# State use: per detect script: 1 per detect thread. Per output script: 1 per
# script.
luajit:
states: 128
# Profiling settings. Only effective if Suricata has been built with the
# the --enable-profiling configure flag.
#
profiling:
# Run profiling for every xth packet. The default is 1, which means we
# profile every packet. If set to 1000, one packet is profiled for every
# 1000 received.
#sample-rate: 1000
# rule profiling
rules:
# Profiling can be disabled here, but it will still have a
# performance impact if compiled in.
enabled: yes
filename: rule_perf.log
append: yes
# Sort options: ticks, avgticks, checks, matches, maxticks
# If commented out all the sort options will be used.
#sort: avgticks
# Limit the number of sids for which stats are shown at exit (per sort).
limit: 10
# output to json
json: @e_enable_evelog@
# per keyword profiling
keywords:
enabled: yes
filename: keyword_perf.log
append: yes
prefilter:
enabled: yes
filename: prefilter_perf.log
append: yes
# per rulegroup profiling
rulegroups:
enabled: yes
filename: rule_group_perf.log
append: yes
# packet profiling
packets:
# Profiling can be disabled here, but it will still have a
# performance impact if compiled in.
enabled: yes
filename: packet_stats.log
append: yes
# per packet csv output
csv:
# Output can be disabled here, but it will still have a
# performance impact if compiled in.
enabled: no
filename: packet_stats.csv
# profiling of locking. Only available when Suricata was built with
# --enable-profiling-locks.
locks:
enabled: no
filename: lock_stats.log
append: yes
pcap-log:
enabled: no
filename: pcaplog_stats.log
append: yes
##
## Netfilter integration
##
# When running in NFQ inline mode, it is possible to use a simulated
# non-terminal NFQUEUE verdict.
# This permit to do send all needed packet to Suricata via this a rule:
# iptables -I FORWARD -m mark ! --mark $MARK/$MASK -j NFQUEUE
# And below, you can have your standard filtering ruleset. To activate
# this mode, you need to set mode to 'repeat'
# If you want packet to be sent to another queue after an ACCEPT decision
# set mode to 'route' and set next-queue value.
# On linux >= 3.1, you can set batchcount to a value > 1 to improve performance
# by processing several packets before sending a verdict (worker runmode only).
# On linux >= 3.6, you can set the fail-open option to yes to have the kernel
# accept the packet if Suricata is not able to keep pace.
# bypass mark and mask can be used to implement NFQ bypass. If bypass mark is
# set then the NFQ bypass is activated. Suricata will set the bypass mark/mask
# on packet of a flow that need to be bypassed. The Nefilter ruleset has to
# directly accept all packets of a flow once a packet has been marked.
nfq:
# mode: accept
# repeat-mark: 1
# repeat-mask: 1
# bypass-mark: 1
# bypass-mask: 1
# route-queue: 2
# batchcount: 20
# fail-open: yes
#nflog support
nflog:
# netlink multicast group
# (the same as the iptables --nflog-group param)
# Group 0 is used by the kernel, so you can't use it
- group: 2
# netlink buffer size
buffer-size: 18432
# put default value here
- group: default
# set number of packet to queue inside kernel
qthreshold: 1
# set the delay before flushing packet in the queue inside kernel
qtimeout: 100
# netlink max buffer size
max-size: 20000
##
## Advanced Capture Options
##
# general settings affecting packet capture
capture:
# disable NIC offloading. It's restored when Suricata exits.
# Enabled by default.
#disable-offloading: false
#
# disable checksum validation. Same as setting '-k none' on the
# commandline.
#checksum-validation: none
# Netmap support
#
# Netmap operates with NIC directly in driver, so you need FreeBSD 11+ which have
# built-in netmap support or compile and install netmap module and appropriate
# NIC driver on your Linux system.
# To reach maximum throughput disable all receive-, segmentation-,
# checksum- offloadings on NIC.
# Disabling Tx checksum offloading is *required* for connecting OS endpoint
# with NIC endpoint.
# You can find more information at https://github.com/luigirizzo/netmap
#
netmap:
# To specify OS endpoint add plus sign at the end (e.g. "eth0+")
- interface: eth2
# Number of capture threads. "auto" uses number of RSS queues on interface.
# Warning: unless the RSS hashing is symmetrical, this will lead to
# accuracy issues.
#threads: auto
# You can use the following variables to activate netmap tap or IPS mode.
# If copy-mode is set to ips or tap, the traffic coming to the current
# interface will be copied to the copy-iface interface. If 'tap' is set, the
# copy is complete. If 'ips' is set, the packet matching a 'drop' action
# will not be copied.
# To specify the OS as the copy-iface (so the OS can route packets, or forward
# to a service running on the same machine) add a plus sign at the end
# (e.g. "copy-iface: eth0+"). Don't forget to set up a symmetrical eth0+ -> eth0
# for return packets. Hardware checksumming must be *off* on the interface if
# using an OS endpoint (e.g. 'ifconfig eth0 -rxcsum -txcsum -rxcsum6 -txcsum6' for FreeBSD
# or 'ethtool -K eth0 tx off rx off' for Linux).
#copy-mode: tap
#copy-iface: eth3
# Set to yes to disable promiscuous mode
# disable-promisc: no
# Choose checksum verification mode for the interface. At the moment
# of the capture, some packets may be with an invalid checksum due to
# offloading to the network card of the checksum computation.
# Possible values are:
# - yes: checksum validation is forced
# - no: checksum validation is disabled
# - auto: Suricata uses a statistical approach to detect when
# checksum off-loading is used.
# Warning: 'checksum-validation' must be set to yes to have any validation
#checksum-checks: auto
# BPF filter to apply to this interface. The pcap filter syntax apply here.
#bpf-filter: port 80 or udp
#- interface: eth3
#threads: auto
#copy-mode: tap
#copy-iface: eth2
# Put default values here
- interface: default
# PF_RING configuration. for use with native PF_RING support
# for more info see http://www.ntop.org/products/pf_ring/
pfring:
- interface: eth0
# Number of receive threads. If set to 'auto' Suricata will first try
# to use CPU (core) count and otherwise RSS queue count.
threads: auto
# Default clusterid. PF_RING will load balance packets based on flow.
# All threads/processes that will participate need to have the same
# clusterid.
cluster-id: 99
# Default PF_RING cluster type. PF_RING can load balance per flow.
# Possible values are cluster_flow or cluster_round_robin.
cluster-type: cluster_flow
# bpf filter for this interface
#bpf-filter: tcp
# If bypass is set then the PF_RING hw bypass is activated, when supported
# by the interface in use. Suricata will instruct the interface to bypass
# all future packets for a flow that need to be bypassed.
#bypass: yes
# Choose checksum verification mode for the interface. At the moment
# of the capture, some packets may be with an invalid checksum due to
# offloading to the network card of the checksum computation.
# Possible values are:
# - rxonly: only compute checksum for packets received by network card.
# - yes: checksum validation is forced
# - no: checksum validation is disabled
# - auto: Suricata uses a statistical approach to detect when
# checksum off-loading is used. (default)
# Warning: 'checksum-validation' must be set to yes to have any validation
#checksum-checks: auto
# Second interface
#- interface: eth1
# threads: 3
# cluster-id: 93
# cluster-type: cluster_flow
# Put default values here
- interface: default
#threads: 2
# For FreeBSD ipfw(8) divert(4) support.
# Please make sure you have ipfw_load="YES" and ipdivert_load="YES"
# in /etc/loader.conf or kldload'ing the appropriate kernel modules.
# Additionally, you need to have an ipfw rule for the engine to see
# the packets from ipfw. For Example:
#
# ipfw add 100 divert 8000 ip from any to any
#
# The 8000 above should be the same number you passed on the command
# line, i.e. -d 8000
#
ipfw:
# Reinject packets at the specified ipfw rule number. This config
# option is the ipfw rule number AT WHICH rule processing continues
# in the ipfw processing system after the engine has finished
# inspecting the packet for acceptance. If no rule number is specified,
# accepted packets are reinjected at the divert rule which they entered
# and IPFW rule processing continues. No check is done to verify
# this will rule makes sense so care must be taken to avoid loops in ipfw.
#
## The following example tells the engine to reinject packets
# back into the ipfw firewall AT rule number 5500:
#
# ipfw-reinjection-rule-number: 5500
napatech:
# The Host Buffer Allowance for all streams
# (-1 = OFF, 1 - 100 = percentage of the host buffer that can be held back)
# This may be enabled when sharing streams with another application.
# Otherwise, it should be turned off.
#hba: -1
# When use_all_streams is set to "yes" the initialization code will query
# the Napatech service for all configured streams and listen on all of them.
# When set to "no" the streams config array will be used.
#
# This option necessitates running the appropriate NTPL commands to create
# the desired streams prior to running suricata.
#use-all-streams: no
# The streams to listen on when auto-config is disabled or when and threading
# cpu-affinity is disabled. This can be either:
# an individual stream (e.g. streams: [0])
# or
# a range of streams (e.g. streams: ["0-3"])
#
streams: ["0-3"]
# When auto-config is enabled the streams will be created and assigned
# automatically to the NUMA node where the thread resides. If cpu-affinity
# is enabled in the threading section. Then the streams will be created
# according to the number of worker threads specified in the worker cpu set.
# Otherwise, the streams array is used to define the streams.
#
# This option cannot be used simultaneous with "use-all-streams".
#
auto-config: yes
# Ports indicates which napatech ports are to be used in auto-config mode.
# these are the port ID's of the ports that will be merged prior to the
# traffic being distributed to the streams.
#
# This can be specified in any of the following ways:
#
# a list of individual ports (e.g. ports: [0,1,2,3])
#
# a range of ports (e.g. ports: [0-3])
#
# "all" to indicate that all ports are to be merged together
# (e.g. ports: [all])
#
# This has no effect if auto-config is disabled.
#
ports: [all]
# When auto-config is enabled the hashmode specifies the algorithm for
# determining to which stream a given packet is to be delivered.
# This can be any valid Napatech NTPL hashmode command.
#
# The most common hashmode commands are: hash2tuple, hash2tuplesorted,
# hash5tuple, hash5tuplesorted and roundrobin.
#
# See Napatech NTPL documentation other hashmodes and details on their use.
#
# This has no effect if auto-config is disabled.
#
hashmode: hash5tuplesorted
##
## Configure Suricata to load Suricata-Update managed rules.
##
## If this section is completely commented out move down to the "Advanced rule
## file configuration".
##
default-rule-path: @e_defaultruledir@
rule-files:
- suricata.rules
##
## Auxiliary configuration files.
##
classification-file: @e_sysconfdir@classification.config
reference-config-file: @e_sysconfdir@reference.config
# threshold-file: @e_sysconfdir@threshold.config
##
## Include other configs
##
# Includes. Files included here will be handled as if they were
# inlined in this configuration file.
#include: include1.yaml
#include: include2.yaml