/* Part of SWI-Prolog
Author: Jan Wielemaker
E-mail: J.Wielemaker@vu.nl
WWW: http://www.swi-prolog.org
Copyright (c) 2001-2014, University of Amsterdam
VU University Amsterdam
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
:- module(ordsets,
[ is_ordset/1, % @Term
list_to_ord_set/2, % +List, -OrdSet
ord_add_element/3, % +Set, +Element, -NewSet
ord_del_element/3, % +Set, +Element, -NewSet
ord_selectchk/3, % +Item, ?Set1, ?Set2
ord_intersect/2, % +Set1, +Set2 (test non-empty)
ord_intersect/3, % +Set1, +Set2, -Intersection
ord_intersection/3, % +Set1, +Set2, -Intersection
ord_intersection/4, % +Set1, +Set2, -Intersection, -Diff
ord_disjoint/2, % +Set1, +Set2
ord_subtract/3, % +Set, +Delete, -Remaining
ord_union/2, % +SetOfOrdSets, -Set
ord_union/3, % +Set1, +Set2, -Union
ord_union/4, % +Set1, +Set2, -Union, -New
ord_subset/2, % +Sub, +Super (test Sub is in Super)
% Non-Quintus extensions
ord_empty/1, % ?Set
ord_memberchk/2, % +Element, +Set,
ord_symdiff/3, % +Set1, +Set2, ?Diff
% SICSTus extensions
ord_seteq/2, % +Set1, +Set2
ord_intersection/2 % +PowerSet, -Intersection
]).
:- autoload(library(oset),
[ oset_int/3,
oset_addel/3,
oset_delel/3,
oset_diff/3,
oset_union/3
]).
:- set_prolog_flag(generate_debug_info, false).
/** <module> Ordered set manipulation
Ordered sets are lists with unique elements sorted to the standard order
of terms (see sort/2). Exploiting ordering, many of the set operations
can be expressed in order N rather than N^2 when dealing with unordered
sets that may contain duplicates. The library(ordsets) is available in a
number of Prolog implementations. Our predicates are designed to be
compatible with common practice in the Prolog community. The
implementation is incomplete and relies partly on library(oset), an
older ordered set library distributed with SWI-Prolog. New applications
are advised to use library(ordsets).
Some of these predicates match directly to corresponding list
operations. It is advised to use the versions from this library to make
clear you are operating on ordered sets. An exception is member/2. See
ord_memberchk/2.
The ordsets library is based on the standard order of terms. This
implies it can handle all Prolog terms, including variables. Note
however, that the ordering is not stable if a term inside the set is
further instantiated. Also note that variable ordering changes if
variables in the set are unified with each other or a variable in the
set is unified with a variable that is `older' than the newest variable
in the set. In practice, this implies that it is allowed to use
member(X, OrdSet) on an ordered set that holds variables only if X is a
fresh variable. In other cases one should cease using it as an ordset
because the order it relies on may have been changed.
*/
%! is_ordset(@Term) is semidet.
%
% True if Term is an ordered set. All predicates in this library
% expect ordered sets as input arguments. Failing to fullfil this
% assumption results in undefined behaviour. Typically, ordered
% sets are created by predicates from this library, sort/2 or
% setof/3.
is_ordset(Term) :-
is_list(Term),
is_ordset2(Term).
is_ordset2([]).
is_ordset2([H|T]) :-
is_ordset3(T, H).
is_ordset3([], _).
is_ordset3([H2|T], H) :-
H2 @> H,
is_ordset3(T, H2).
%! ord_empty(?List) is semidet.
%
% True when List is the empty ordered set. Simply unifies list
% with the empty list. Not part of Quintus.
ord_empty([]).
%! ord_seteq(+Set1, +Set2) is semidet.
%
% True if Set1 and Set2 have the same elements. As both are
% canonical sorted lists, this is the same as ==/2.
%
% @compat sicstus
ord_seteq(Set1, Set2) :-
Set1 == Set2.
%! list_to_ord_set(+List, -OrdSet) is det.
%
% Transform a list into an ordered set. This is the same as
% sorting the list.
list_to_ord_set(List, Set) :-
sort(List, Set).
%! ord_intersect(+Set1, +Set2) is semidet.
%
% True if both ordered sets have a non-empty intersection.
ord_intersect([H1|T1], L2) :-
ord_intersect_(L2, H1, T1).
ord_intersect_([H2|T2], H1, T1) :-
compare(Order, H1, H2),
ord_intersect__(Order, H1, T1, H2, T2).
ord_intersect__(<, _H1, T1, H2, T2) :-
ord_intersect_(T1, H2, T2).
ord_intersect__(=, _H1, _T1, _H2, _T2).
ord_intersect__(>, H1, T1, _H2, T2) :-
ord_intersect_(T2, H1, T1).
%! ord_disjoint(+Set1, +Set2) is semidet.
%
% True if Set1 and Set2 have no common elements. This is the
% negation of ord_intersect/2.
ord_disjoint(Set1, Set2) :-
\+ ord_intersect(Set1, Set2).
%! ord_intersect(+Set1, +Set2, -Intersection)
%
% Intersection holds the common elements of Set1 and Set2.
%
% @deprecated Use ord_intersection/3
ord_intersect(Set1, Set2, Intersection) :-
oset_int(Set1, Set2, Intersection).
%! ord_intersection(+PowerSet, -Intersection)
%
% Intersection of a powerset. True when Intersection is an ordered
% set holding all elements common to all sets in PowerSet.
%
% @compat sicstus
ord_intersection(PowerSet, Intersection) :-
key_by_length(PowerSet, Pairs),
keysort(Pairs, [_-S|Sorted]),
l_int(Sorted, S, Intersection).
key_by_length([], []).
key_by_length([H|T0], [L-H|T]) :-
length(H, L),
key_by_length(T0, T).
l_int([], S, S).
l_int([_-H|T], S0, S) :-
ord_intersection(S0, H, S1),
l_int(T, S1, S).
%! ord_intersection(+Set1, +Set2, -Intersection) is det.
%
% Intersection holds the common elements of Set1 and Set2. Uses
% ord_disjoint/2 if Intersection is bound to `[]` on entry.
ord_intersection(Set1, Set2, Intersection) :-
( Intersection == []
-> ord_disjoint(Set1, Set2)
; oset_int(Set1, Set2, Intersection)
).
%! ord_intersection(+Set1, +Set2, ?Intersection, ?Difference) is det.
%
% Intersection and difference between two ordered sets.
% Intersection is the intersection between Set1 and Set2, while
% Difference is defined by ord_subtract(Set2, Set1, Difference).
%
% @see ord_intersection/3 and ord_subtract/3.
ord_intersection([], L, [], L) :- !.
ord_intersection([_|_], [], [], []) :- !.
ord_intersection([H1|T1], [H2|T2], Intersection, Difference) :-
compare(Diff, H1, H2),
ord_intersection2(Diff, H1, T1, H2, T2, Intersection, Difference).
ord_intersection2(=, H1, T1, _H2, T2, [H1|T], Difference) :-
ord_intersection(T1, T2, T, Difference).
ord_intersection2(<, _, T1, H2, T2, Intersection, Difference) :-
ord_intersection(T1, [H2|T2], Intersection, Difference).
ord_intersection2(>, H1, T1, H2, T2, Intersection, [H2|HDiff]) :-
ord_intersection([H1|T1], T2, Intersection, HDiff).
%! ord_add_element(+Set1, +Element, ?Set2) is det.
%
% Insert an element into the set. This is the same as
% ord_union(Set1, [Element], Set2).
ord_add_element(Set1, Element, Set2) :-
oset_addel(Set1, Element, Set2).
%! ord_del_element(+Set, +Element, -NewSet) is det.
%
% Delete an element from an ordered set. This is the same as
% ord_subtract(Set, [Element], NewSet).
ord_del_element(Set, Element, NewSet) :-
oset_delel(Set, Element, NewSet).
%! ord_selectchk(+Item, ?Set1, ?Set2) is semidet.
%
% Selectchk/3, specialised for ordered sets. Is true when
% select(Item, Set1, Set2) and Set1, Set2 are both sorted lists
% without duplicates. This implementation is only expected to work
% for Item ground and either Set1 or Set2 ground. The "chk" suffix
% is meant to remind you of memberchk/2, which also expects its
% first argument to be ground. ord_selectchk(X, S, T) =>
% ord_memberchk(X, S) & \+ ord_memberchk(X, T).
%
% @author Richard O'Keefe
ord_selectchk(Item, [X|Set1], [X|Set2]) :-
X @< Item,
!,
ord_selectchk(Item, Set1, Set2).
ord_selectchk(Item, [Item|Set1], Set1) :-
( Set1 == []
-> true
; Set1 = [Y|_]
-> Item @< Y
).
%! ord_memberchk(+Element, +OrdSet) is semidet.
%
% True if Element is a member of OrdSet, compared using ==. Note
% that _enumerating_ elements of an ordered set can be done using
% member/2.
%
% Some Prolog implementations also provide ord_member/2, with the
% same semantics as ord_memberchk/2. We believe that having a
% semidet ord_member/2 is unacceptably inconsistent with the *_chk
% convention. Portable code should use ord_memberchk/2 or
% member/2.
%
% @author Richard O'Keefe
ord_memberchk(Item, [X1,X2,X3,X4|Xs]) :-
!,
compare(R4, Item, X4),
( R4 = (>) -> ord_memberchk(Item, Xs)
; R4 = (<) ->
compare(R2, Item, X2),
( R2 = (>) -> Item == X3
; R2 = (<) -> Item == X1
;/* R2 = (=), Item == X2 */ true
)
;/* R4 = (=) */ true
).
ord_memberchk(Item, [X1,X2|Xs]) :-
!,
compare(R2, Item, X2),
( R2 = (>) -> ord_memberchk(Item, Xs)
; R2 = (<) -> Item == X1
;/* R2 = (=) */ true
).
ord_memberchk(Item, [X1]) :-
Item == X1.
%! ord_subset(+Sub, +Super) is semidet.
%
% Is true if all elements of Sub are in Super
ord_subset([], _).
ord_subset([H1|T1], [H2|T2]) :-
compare(Order, H1, H2),
ord_subset_(Order, H1, T1, T2).
ord_subset_(>, H1, T1, [H2|T2]) :-
compare(Order, H1, H2),
ord_subset_(Order, H1, T1, T2).
ord_subset_(=, _, T1, T2) :-
ord_subset(T1, T2).
%! ord_subtract(+InOSet, +NotInOSet, -Diff) is det.
%
% Diff is the set holding all elements of InOSet that are not in
% NotInOSet.
ord_subtract(InOSet, NotInOSet, Diff) :-
oset_diff(InOSet, NotInOSet, Diff).
%! ord_union(+SetOfSets, -Union) is det.
%
% True if Union is the union of all elements in the superset
% SetOfSets. Each member of SetOfSets must be an ordered set, the
% sets need not be ordered in any way.
%
% @author Copied from YAP, probably originally by Richard O'Keefe.
ord_union([], []).
ord_union([Set|Sets], Union) :-
length([Set|Sets], NumberOfSets),
ord_union_all(NumberOfSets, [Set|Sets], Union, []).
ord_union_all(N, Sets0, Union, Sets) :-
( N =:= 1
-> Sets0 = [Union|Sets]
; N =:= 2
-> Sets0 = [Set1,Set2|Sets],
ord_union(Set1,Set2,Union)
; A is N>>1,
Z is N-A,
ord_union_all(A, Sets0, X, Sets1),
ord_union_all(Z, Sets1, Y, Sets),
ord_union(X, Y, Union)
).
%! ord_union(+Set1, +Set2, ?Union) is det.
%
% Union is the union of Set1 and Set2
ord_union(Set1, Set2, Union) :-
oset_union(Set1, Set2, Union).
%! ord_union(+Set1, +Set2, -Union, -New) is det.
%
% True iff ord_union(Set1, Set2, Union) and
% ord_subtract(Set2, Set1, New).
ord_union([], Set2, Set2, Set2).
ord_union([H|T], Set2, Union, New) :-
ord_union_1(Set2, H, T, Union, New).
ord_union_1([], H, T, [H|T], []).
ord_union_1([H2|T2], H, T, Union, New) :-
compare(Order, H, H2),
ord_union(Order, H, T, H2, T2, Union, New).
ord_union(<, H, T, H2, T2, [H|Union], New) :-
ord_union_2(T, H2, T2, Union, New).
ord_union(>, H, T, H2, T2, [H2|Union], [H2|New]) :-
ord_union_1(T2, H, T, Union, New).
ord_union(=, H, T, _, T2, [H|Union], New) :-
ord_union(T, T2, Union, New).
ord_union_2([], H2, T2, [H2|T2], [H2|T2]).
ord_union_2([H|T], H2, T2, Union, New) :-
compare(Order, H, H2),
ord_union(Order, H, T, H2, T2, Union, New).
%! ord_symdiff(+Set1, +Set2, ?Difference) is det.
%
% Is true when Difference is the symmetric difference of Set1 and
% Set2. I.e., Difference contains all elements that are not in the
% intersection of Set1 and Set2. The semantics is the same as the
% sequence below (but the actual implementation requires only a
% single scan).
%
% ==
% ord_union(Set1, Set2, Union),
% ord_intersection(Set1, Set2, Intersection),
% ord_subtract(Union, Intersection, Difference).
% ==
%
% For example:
%
% ==
% ?- ord_symdiff([1,2], [2,3], X).
% X = [1,3].
% ==
ord_symdiff([], Set2, Set2).
ord_symdiff([H1|T1], Set2, Difference) :-
ord_symdiff(Set2, H1, T1, Difference).
ord_symdiff([], H1, T1, [H1|T1]).
ord_symdiff([H2|T2], H1, T1, Difference) :-
compare(Order, H1, H2),
ord_symdiff(Order, H1, T1, H2, T2, Difference).
ord_symdiff(<, H1, Set1, H2, T2, [H1|Difference]) :-
ord_symdiff(Set1, H2, T2, Difference).
ord_symdiff(=, _, T1, _, T2, Difference) :-
ord_symdiff(T1, T2, Difference).
ord_symdiff(>, H1, T1, H2, Set2, [H2|Difference]) :-
ord_symdiff(Set2, H1, T1, Difference).