2013-02-13 Daniel P. Berrange <berrange@redhat.com>
Update for 0.5.5 release
Update min spice-gtk requirement docs / RPM requires
Turn off deprecation warnings
GLib deprecated the GValueArray type without providing an ABI
compatible replacement. Thus we need to disable dreprecation
warnings
../../src/virt-viewer-auth.c: In function 'virt_viewer_auth_vnc_credentials':
../../src/virt-viewer-auth.c:112:9: error: 'g_value_array_get_nth' is deprecated (declared at /usr/include/glib-2.0/gobject/gvaluearray.h:65): Use 'g_array_index' instead [-Werror=deprecated-declarations]
Avoid Makefile @ check for data/Makefile.am
Adapt 'po file' syntax check to look at more files
The 'po file' check needs to consider various files in data/
as well as normal sources
Don't define the same make target/variables twice
The NSIS patches defined the .PHONY target twice and also
defined CLEANFILES twice
Auto-generate AUTHORS file from GIT logs
Rather than trying to manually keep track of authors,
just auto-generate the list from GIT logs
2013-02-13 Marc-André Lureau <marcandre.lureau@gmail.com>
win: add virt-viewer.msi build rule
In order to build the MSI, you will need msitools:
http://ftp.gnome.org/pub/GNOME/sources/msitools/
The MANUFACTURER environment variable is mandatory and should be set
to the manufacturer/author of the MSI build.
2013-02-12 Marc-André Lureau <marcandre.lureau@gmail.com>
spec: include mime file
build-sys: add --with-buildid to details build version
Add a configure argument to append build version details, similar to
what Daniel Berrange proposed in the "use finer package version in
mingw-virt-viewer" thread on the ML.
2013-02-11 Marc-André Lureau <marcandre.lureau@gmail.com>
Register remote-viewer mime handling
Unfortunately, I don't see yet how we could avoid the browser dialog
asking which application to open. On Firefox, each user has a
mimeTypes.rdf, but we can't really modify it..
win32: process message queue in debug-helper
Process messages while waiting for pi.hProcess.
Avoid the spice-x from hanging in WaitForInputIdle(), although the
client itself might not be ready, not even started...
https://bugzilla.redhat.com/show_bug.cgi?id=903190
2013-02-11 Hans de Goede <hdegoede@redhat.com>
virtviewer-window: Make sure fullscreen window stays on the same monitor
Sometimes the guest may shortly disable and then re-enable a monitor while
in fullscreen mode, this happens for example when changing display resolution
through gnome-display-properties inside the guest. This causes the client
window-manager to remap the window, and this can cause it to end up
on a different monitor.
This patch fixes this by remembering the position the window is places at
when going fullcreen and moving it there again when its gets (re-)shown.
2013-02-07 Marc-André Lureau <marcandre.lureau@gmail.com>
Fix "Do not ask me again" checkbox settings saving
Based on bug report by Hans:
The code block for saving was below this check:
if (priv->session) {
virt_viewer_session_close(VIRT_VIEWER_SESSION(priv->session));
if (priv->connected) {
priv->quiting = TRUE;
return;
}
}
Which means it never executes when quiting virt-viewer while conneced, causing
the "Do not ask me again" checkbox settings to not be saved.
2013-02-06 Hans de Goede <hdegoede@redhat.com>
usbredir: Fix usbredir menu always being grayed out on monitor 2+
virt-viewer-display-spice: Pass proper x and y coordinates in windowed mode
This stops monitor order from the guest from being re-arranged in multi-
monitor setups when switching between fullscreen and windowed mode.
Note this relies on spice-gtk's auto monitor alignment code, which currently
does not properly handle setups where there is more then 1 row of monitors,
ie 2x1 - 5x1 will work fine, but 2x2 will not.
virt-viewer-display-spice: Use real monitor coordinates in fullscreen
Now that we pass the real monitor coordinates, tell spice-gtk to use them,
rather then to use the passed coordinates as input for its automatic monitor
alignment. This fixes ie monitors in a 2x2 grid, showing up as a 4x1
configuration in the guest.
virt-viewer-display-spice: Pass real monitor coordinates in fullscreen
Rather then always passing +0+0
2013-02-04 Michal Privoznik <mprivozn@redhat.com>
g_{message,warning}: Use printf style
The g_message() and g_warning functions expect printf style of
arguments. That is, whenever we want to print a string, it has
to be preceded with "%s" format.
configure: Update with autoupdate
Don't redefine _FORTIFY_SOURCE macro
If the _FORTIFY_SOURCE has been already defined, we unconditionally
redefine it, leaving us with warning/error thrown at compilation time.
2013-02-04 Martin Kletzander <mkletzan@redhat.com>
Make compilation work with automake 1.13
Just one thing needs to be changed for virt-viewer to build with
automake 1.13, AM_CONFIG_HEADER is deprecated and should be
AC_CONFIG_HEADERS.
2013-01-31 Marc-André Lureau <marcandre.lureau@gmail.com>
remote-viewer: controller sets spice session proxy
Trivial change since spice-gtk now has proxy session property and
controller message, just forward it.
Add a "Do not ask me again" checkbox when closing app
Always ask user about closing session
Currently, virt-viewer doesn't ask for user confirmation when closing
a single monitor session. Always ask before closing, as requested by
user.
https://bugzilla.redhat.com/show_bug.cgi?id=803912
2013-01-29 Marc-André Lureau <marcandre.lureau@gmail.com>
spice: add proxy configuration to connection file
2013-01-24 Christophe Fergeau <cfergeau@redhat.com>
Remove unused label
It's no longer used after aecd80ec7
Remove unused variable
'window' is no longer used after 412bcf6f.
Fix warning when compiling without spice-gtk support
When remote-viewer is compiled without spice-gtk support, spice-session.h
will not get included in remote-viewer.c, causing these warnings:
remote-viewer.c: In function 'remote_viewer_start':
remote-viewer.c:693:9: warning: implicit declaration of function
'virt_viewer_session_set_file' [-Wimplicit-function-declaration]
remote-viewer.c:693:9: warning: nested extern declaration of
'virt_viewer_session_set_file' [-Wnested-externs]
Add missing intltool BuildRequires
The configure script fails if intltool is not installed.
mingw: Add packages for virt-viewer NSIS installer
This makes it much easier to build an updated Windows installer binary
as this can now be done using mock/koji/... by using this .spec and
a virt-viewer tarball.
mingw: Build a gtk2 version of virt-viewer
The nsis file we ship is generating an installer for a GTK+2 build
of virt-viewer, so it's inconsistent for the mingw-virt-viewer
spec file to generate a GTK+3 build. Switch to building a GTK+2
version of virt-viewer in mingw-virt-viewer.spec
mingw: Package debug-helper.exe
mingw: Package debug files
When building on f18, the build fails because of unpackaged
debug files. Use the appropriate mingw macro to generate
the mingw debug packages.
The build failure is:
RPM build errors:
error: Installed (but unpackaged) file(s) found:
/usr/i686-w64-mingw32/sys-root/mingw/bin/debug-helper.exe.debug
/usr/i686-w64-mingw32/sys-root/mingw/bin/remote-viewer.exe.debug
/usr/i686-w64-mingw32/sys-root/mingw/bin/virt-viewer.exe.debug
/usr/i686-w64-mingw32/sys-root/mingw/bin/windows-cmdline-wrapper.exe.debug
/usr/x86_64-w64-mingw32/sys-root/mingw/bin/debug-helper.exe.debug
/usr/x86_64-w64-mingw32/sys-root/mingw/bin/remote-viewer.exe.debug
/usr/x86_64-w64-mingw32/sys-root/mingw/bin/virt-viewer.exe.debug
/usr/x86_64-w64-mingw32/sys-root/mingw/bin/windows-cmdline-wrapper.exe.debug
Installed (but unpackaged) file(s) found:
/usr/i686-w64-mingw32/sys-root/mingw/bin/debug-helper.exe.debug
/usr/i686-w64-mingw32/sys-root/mingw/bin/remote-viewer.exe.debug
/usr/i686-w64-mingw32/sys-root/mingw/bin/virt-viewer.exe.debug
/usr/i686-w64-mingw32/sys-root/mingw/bin/windows-cmdline-wrapper.exe.debug
/usr/x86_64-w64-mingw32/sys-root/mingw/bin/debug-helper.exe.debug
/usr/x86_64-w64-mingw32/sys-root/mingw/bin/remote-viewer.exe.debug
/usr/x86_64-w64-mingw32/sys-root/mingw/bin/virt-viewer.exe.debug
/usr/x86_64-w64-mingw32/sys-root/mingw/bin/windows-cmdline-wrapper.exe.debug
mingw: Fix typo in mingw macro name (hedder -> header)
nsis: Adjust file list
Adjust file names for mingw-usbredir dlls and readline dlls
2013-01-22 Hans de Goede <hdegoede@redhat.com>
virt-viewer-display-spice: Get monitor under our window
When getting monitor info for going fullscreen, Get the monitor under
*our* window rather then under the root-window.
Noticed this not working properly when testing the monitor coordinates stuff,
but this should also help people seeing problems when using non equally sized
monitors.
2013-01-18 Marc-André Lureau <marcandre.lureau@gmail.com>
vnc: add connection by file
Learn to connect to a VNC server with the connection details file, ex:
[virt-viewer]
type=vnc
host=localhost
port=2356
password=foobar
v2:
- add username/password support
https://bugzilla.redhat.com/show_bug.cgi?id=843410
file: add username support
2012-12-21 Hans de Goede <hdegoede@redhat.com>
Make hotkey configuration functionality available from the cmdline (v2)
Changes in v2:
-Add --hotkeys documentation to the man-pages
Add a virt_viewer_app_set_hotkeys() helper function
2012-12-20 Christophe Fergeau <cfergeau@redhat.com>
Improve check for overridden grab key combination
remote-viewer can either use the default grab/ungrab handled by
spice-gtk, or override it and use the standard gtk+ accelerator
mechanism. However, the code currently assumes that if any accelerator
is set in remote-viewer, then the grab key has been overridden.
This commit makes sure the grab key is actually overridden before assuming
so.
Don't leak SpiceGrabSequence in enable_accel_changed
Improve hotkeys controller behaviour
Disable default accelerators when setting bindings from the controller
in case the controller does not override them all. This ensures we don't
inherit from the bindings set in VirtViewerApp::constructor if the controller
doesn't set any bindings for a given action.
2012-12-07 Marc-André Lureau <marcandre.lureau@gmail.com>
Use monitor geometry, not screen size
In a recent commit, 3bb6f5ec805ecfe78eba6d4d98e3ffcab195273a, I
introduced a regression: going fullscreen would no longer match client
and guest resolution correctly.
A GdkScreen is not necessarily the physical screen monitor size.
Lookup the physical monitor size using
gdk_screen_get_monitor_geometry().
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=881020
2012-12-05 Michal Privoznik <mprivozn@redhat.com>
session-spice: Cast CA string to gunit8 pointer
SpiceSession has 'ca' property which is type of GByteArray*.
However, when we read the property from file, we read it as
string. For conversion g_byte_array_new_take() is used which
takes given pointer as guint8* so we need to do the cast.
Sanitize syntax-check
make syntax-check is producing some errors about empty line at EOF
and missing #include <config.h> in src/virt-viewer-file.c
* src/virt-viewer-file.c: add #include <config.h>
* data/virt-viewer-debug.nsis.in: remove empty line at EOF
2012-12-05 Doug Goldstein <cardoe@cardoe.com>
Make .desktop file comply with spec
The .desktop file did not comply with the Desktop Entry spec as checked
with desktop-file-validate. Boolean keys are defined as taking only
'true' or 'false', the entry Terminal had False. MimeType is a string
list and therefore must be terminated with a ;
2012-11-27 Marc-André Lureau <marcandre.lureau@gmail.com>
remote-viewer: learn to connect from file
v2:
- move some variables to inner-block as requested by reviewer
spice: learn to connect from file
Add VirtViewerSession:file property
If VirtViewerSession:file is set, it should be used to define the
connection parameters. Also correct the mime type used in this case.
The mime type is needed to identify the kind of resources we are
adding to the recent list. The recent list can then be filtered and
various application handling that type may attempt to access that
resource.
Add VirtViewerFile
v2:
- use !! for boolean values setter
- switch from bytearray/base64 to plain string for CA (PEM)
- add file format comment
Move spice_hotkey_to_gtk_accelerator() to util
To be compatible with RHEVM, VirtViewerFile hotkey format will use the
Spice Controller format.
recent: get mime type from session
Do not use spice mime type for all kind of sessions, but depending on
what is actually being used.
session: add virt_viewer_session_mime_type()
debug.nsis: remove superflous path
display: only un-constrain display size once it is mapped
Wait until the widget is actually on screen before removing its
size constrain. This solves 50x50 window secondary window size
when connecting to a multi-monitor spice guest.
2012-11-23 Marc-André Lureau <marcandre.lureau@gmail.com>
Add virt-viewer-debug.exe NSIS installer
This installer will provide with the tools and configuration needed to
debug virt-viewer & remote-viewer. It will install itself by default in
virt-viewer directory.
2012-11-21 Michal Privoznik <mprivozn@redhat.com>
debug-helper: include <config.h>
AUTHORS: add Dave Allan
as he has supplied patch (commit 74b1b62510d9390).
cfg.mk: Don't require bindtextdomain directly
With current implementation, all binaries that need it call
bindtextdomain but not directly. They call a helper function
instead. This makes, however, syntax-check fail as it cannot
recognize it.
Original patch proposed by Eric Blake <eblake@redhat.com>
2012-11-20 Marc-André Lureau <marcandre.lureau@gmail.com>
spice: the session is connected when main channel opened
The previous change in 399aae55aa384bf91dff0fc770497c0d5f935fa9 rely
on correct session-connected signal. However, the spice backend
is emiting it too early, when the main channel is created, where
it should wait until it is connected instead.
"Unable to connect to the graphic server" error on guest shutdown
In virt_viewer_app_activate(), priv->connected is set to FALSE when
the connect/active is successfull. However, we rely on it to know
whether the virt_viewer_app_disconnected() is an error, so only set it
to FALSE when connection failed.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=875697
2012-11-16 Marc-André Lureau <marcandre.lureau@gmail.com>
build-sys: add min libvirt version requirement check
2012-11-15 Christophe Fergeau <cfergeau@redhat.com>
Make sure png screenshots have a .png extensions
When falling back to saving to .png, the filename might not
end with .png. This commit appends the .png extension to the
screenshot filename if it's missing.
Allow to save to other formats than png
Currently, the screenshots can only be saved to png. This commit
checks if the file extension is a known one, and will save to this
format if it is. Otherwise it will fallback to saving to png.
Set a default dir/name for screenshots
It makes sense for the screenshots to be saved in ~/Images,
especially as otherwise the filechooser will display
'recent documents' to which we cannot save. This commit also sets
the default screenshot name to 'Screenshot'.
Fix spice-gtk check in configure.ac
The check that at least one of spice-gtk and gtk-vnc is present
uses a wrong variable name to check for spice-gtk presence, which
causes the check to think it's never present. This would make
gtk-vnc presence mandatory. This commit fixes the name of the
spice-gtk variable ($have_gtk_spice -> $have_spice_gtk).
2012-11-14 Michal Privoznik <mprivozn@redhat.com>
Don't SIGSEGV if no transport is used.
One of previous commits (74b1b62510d939) allowed us to connect to
localhost directly if ssh transport was used. However, if there's
not transport, we SIGSEGV'ed as g_str_equal doesn't like NULL as
one of arguments. Change this to g_strcmp0 which does the same
service but is more friendly to NULL arguments.
2012-11-13 Michal Privoznik <mprivozn@redhat.com>
Reconnect to libvirtd after connection breaks
Currently, if user wants to reconnect to a domain he can use
'-r' cmd line argument. This makes virt-viewer listen to
domain events. However, if connection to libvirtd breaks
somehow, we will receive no longer any event. Hence we must
reconnect to the libvirt.
2012-11-08 Dave Allan <dallan@redhat.com>
Connect to localhost for display when transport is ssh
When connecting to a VM that does not have a 'listen' tag in its
graphcs element, we have to guess where to try to connect to the VM's
display. The current default is the host specified in the connection
URI which is correct for most transports, however, the SSH transport
makes the display connection from the remote end, so in that case,
attempt to connect to localhost.
2012-10-25 Guido Günther <agx@sigxcpu.org>
Fail if neither vnc nor spice is detected
Since the viewer makes little sense otherwise.
2012-10-23 Marc-André Lureau <marcandre.lureau@gmail.com>
Fix jenkins build failure
virt-viewer-util.c: In function 'virt_viewer_util_init':
virt-viewer-util.c:289: warning: implicit declaration of function 'setlocale'
virt-viewer-util.c:289: warning: nested extern declaration of 'setlocale'
virt-viewer-util.c:289: error: 'LC_ALL' undeclared (first use in this function)
virt-viewer-util.c:289: error: (Each undeclared identifier is reported only once
virt-viewer-util.c:289: error: for each function it appears in.)
Use a mutex to check if VirtViewer running
We need to warn user that installer can't proceed if there is already
a running instance of VirtViewer or of the installer.
https://bugzilla.redhat.com/show_bug.cgi?id=864033
Use a common early init() function
There is a number of things both virt-viewer and remote-viewer need to
do early during execution. Do it only in one place.
windows: add debug-helper
This is a simple program that will set some debug variable, and run
gdb and wait until it finished. This makes it possible to debug
"remote-viewer --spice-controller" easily, by setting the necessary
variables and keeping the parent process running (the activex whatches
its death)
To use it, replace the HKCU "Software\spice-space.org\spicex\client"
value "$INSTDIR\bin\remote-viewer.exe --spice-controller" with
"$INSTDIR\bin\debug-helper.exe remote-viewer.exe --spice-controller".
nsis: add deps.txt file in installer
This helps track package version that were used during the
build of Windows installer. It's not ideal, but make up the
lack of package management on windows
nsis: update required files and libraries
win32: there is no CONERR$, only CONOUT$
2012-10-17 Marc-André Lureau <marcandre.lureau@gmail.com>
spice: only autoresize once with screen size in fullscreen
It's currently not possible to configure guest with higher resolution
than native, as it will switch back to native, since the gtk widget
allocation will always end up being the size of the screen. We
special-case fullscreen mode, and only resize when entering
fullscreen. Furthermore, it avoids sending extra unnecessary resize
events to the guest whenever gtk+ call size allocate in various
stages, with different values.
https://bugzilla.redhat.com/show_bug.cgi?id=864929
spice: avoid rounding issues when scaling up display
Fix some unwanted guest resize due to rounding issues (at least when
scaling up)
We may want to save the original remote desktop size, instead of
always checking widget requisition. That way zooming shouldn't resize
guest at all, but it seems tricky to handle that special case vs user
window resize that should trigger guest resize.
https://bugzilla.redhat.com/show_bug.cgi?id=856678
2012-10-16 Marc-André Lureau <marcandre.lureau@gmail.com>
Do not resize window to minimum when toggling auto-resize
The virt_viewer_display_idle() will queue a resize event that will
result in display size requisition of 50x50. If we later resize the
window to 1x1 in virt_viewer_window_resize() we end up with a tiny
window.
It is legitimate not to force that 1x1 window resize when toggling the
option. After the rest of the logic in virt_viewer_window_resize(), if
the remote desktop ends up being resize, that will trigger another
virt_viewer_set_desktop_size() and finally change the window size
appropriately.
https://bugzilla.redhat.com/show_bug.cgi?id=856610
2012-10-12 Daniel P. Berrange <berrange@redhat.com>
Add RPM magic to run autoreconf
2012-10-10 Daniel P. Berrange <berrange@redhat.com>
Fix check for IPv6 any address
The string '::' is just one of many possible ways to express
the IPv6 "any" address. Others include '::0', '0:0:0:0:0:0:0:0',
'0::0' and more. Instead of trying to do strcmp, actually try
parsing the address with GInetAddress and then simply use an
accessor to check what type it is
2012-10-09 Daniel P. Berrange <berrange@redhat.com>
Allow user to set a window title for remote-viewer
Currently the remote viewer windows get the URI as their
title. Provide a --title STRING arg to remote-viewer to
let the user override the title with something more
meaningful to them.
2012-10-01 Christophe Fergeau <cfergeau@redhat.com>
Don't free SPICE ticket twice
Commit 2201a5a was supposed to free a SPICE ticket leak, but it's
actually introducing a double-free as the SPICE ticket is
unconditionally freed at the end of
virt_viewer_session_spice_main_channel_event
2012-09-18 Christophe Fergeau <cfergeau@redhat.com>
Append \n to message in virt_viewer_app_trace
Callers manually add a trailing \n when they call virt_viewer_app_trace,
but it's sometimes forgotten, leading to rhbz#822794. This commit
removes the \n from all callers (it was missing in a few of them)
and adds it in virt_viewer_app_trace.
2012-09-18 Daniel P. Berrange <berrange@redhat.com>
Refresh translations
2012-09-17 Daniel P. Berrange <berrange@redhat.com>
Update for 0.5.4 releae
2012-09-14 Daniel P. Berrange <berrange@redhat.com>
Use a more specific regex to fix enum include paths
Simply doing a search replace on $(srcdir) doesn't work very
well in non-VPATH builds. Use a more specific regex that won't
generate false matches
Look in builddir for icons & strip build dir prefix from enum file includs
Don't include generated icons in tar.gz and clean them up
Convert to use Mingw64 toolchain for Windows biulds
2012-08-13 Christophe Fergeau <cfergeau@redhat.com>
Document -f=auto-conf in remote-viewer --help
virt-viewer does not support -f=auto-conf so this does not change the
option there.
Fixes rhbz#718001
2012-08-10 Christophe Fergeau <cfergeau@redhat.com>
Use real binary name in help message
Now that we have 2 distinct binaries, remote-viewer and virt-viewer,
'PACKAGE' can no longer be used in error messages as the name of the
binary. This causes a small inconsistency when running
'remote-viewer --foobar' as the error message would be:
'Unknown option --foobar
Run 'virt-viewer --help' to see a full list of available command line options'
This commit makes sure we use argv[0] for this message.
Fixes rhbz#814150
2012-07-23 Marc-André Lureau <marcandre.lureau@gmail.com>
Show status page by default if display not ready
Switch back to status page if display is not ready.
Make status widget visible immediately
GtkNotebook will use the currently visible widget as default page.
If we don't show status widget before we append the display, the
current page will be on display. Quoting Gtk+ documentation:
"Note that due to historical reasons, GtkNotebook refuses to switch to
a page unless the child widget is visible. Therefore, it is
recommended to show child widgets before adding them to a notebook."
vnc: when session is disconnected, make the display as non-ready
Simplify display flag handling
Add VirtViewerSession::session-display-updated
Rebuild menu when agent is connected. Only when the agent is running
may a display be enabled/disabled.
Make the display submenu insensitive if display can't be selected
spice: factor out main channel lookup code
Add VirtViewerDisplay::selectable property
This property will be set when the display can be selected to be
"enabled" and shown (this can involve creating/connecting an
additional guest monitor, and may need guest agent cooperation for
example).
Add virt_viewer_window_get_display()
Getter used in following changes.
Hook up handling of Monitors
Rely on spice-gtk display channel monitors property to manage
displays. The same display channel may now provide several monitors,
the SpiceDisplay widget must be told which monitor to display
Bump glib > 2.22, add compat file
We use API from 2.22, and some from further version. Add
virt-glib-compat.h fallback file for those.
Use SpiceDisplay:ready property instead of channel mark
The display can now check several conditions before the display can be
shown, use that instead of display mark, which was not high-level
enough.
Number display starting from 1
Prevent from adding the same display several time in the session
In virt_viewer_session_spice_display_monitors(), we (re)add the
display unconditionnaly every time we receive a new MonitorConfig.
Add a DISABLED display hint
This flag will help to track whether the display has been
removed/closed and whether it really has a valid display.
Ready in contrast, is used to "hide" temporarily the display (when
starting or redrawing the display, to avoid artifacts)
Use virt_viewer_connect_object() for display
When display is released, detach signal automatically.
Fix various crash related to not cleaning up signal handlers properly,
due to no longer 1-1 only relation between display widget and channel.
Rebuild display menu when a window is added or removed
Mark a menu string as translatable
Run-time check values before doing bad computation
Turn display:show-hint into flags type
Destroy dialog immediately after run
If the parent is already destroyed, it looks like the dialog is
destroyed too. This avoids a crash when calling app_quit().
build: generate enums type boilerplate
spice: disconnect signal handlers when either object is destroyed
Use virt_viewer_signal_connect_object(), a copy of telepathy
utility function tp_g_signal_connect_object(). This function
will take care of removing signal handler if any of emitter or
attached object are destroyed.
The following patches will have this condition met, since there is no
longer 1-1 relation between channel and display. The channels can
continue to be around when some of the display are removed.
spice: improve fullscreen=auto-conf
Do keep client monitor position, do not align monitors automatically.
The align property is only available since v0.12.101.
2012-07-03 Marc-André Lureau <marcandre.lureau@gmail.com>
build: allow building with newer glibc-headers and -O0
Fix copied from libvirt, commit by Eric Blake.
glibc 2.15 (on Fedora 17) coupled with explicit disabling of
optimization during development dies a painful death:
/usr/include/features.h:314:4: error: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Werror=cpp]
Work around this by only conditionally defining _FORTIFY_SOURCE,
in the case where glibc can actually use it. The trick is using
AH_VERBATIM instead of AC_DEFINE.
2012-06-15 Christophe Fergeau <cfergeau@redhat.com>
Revert "Fix virt_viewer_app_activate return value"
This reverts commit 3ce6df7c309068f36e2602692da809a153ed5688. This
commit broke virt-viewer which expects this function to return -1
or 0 on error, and a positive value on success in
virt_viewer_initial_connect.
2012-06-13 Christophe Fergeau <cfergeau@redhat.com>
Fix virt_viewer_app_activate return value
VirtViewerApp::activate is expected to return -1 on errors.
It calls the VirtViewerSession::open_* methods, which return FALSE
on error. However, VirtViewerApp::activate directly returns these
boolean instead of testing the returned value and properly returning
-1 on errors. This caused errors in these open methodes to be ignored.
Fix various memory leaks
==25063== 59 bytes in 1 blocks are definitely lost in loss record 5,163 of 9,502
==25063== at 0x4A0884D: malloc (vg_replace_malloc.c:263)
==25063== by 0x3DE384D2BE: g_malloc (gmem.c:159)
==25063== by 0x3DE3862D0B: g_strdup (gstrfuncs.c:356)
==25063== by 0x41F40A: connected (remote-viewer-main.c:186)
==25063== by 0x3DE400F663: g_closure_invoke (gclosure.c:777)
==25063== by 0x3DE40206D7: signal_emit_unlocked_R (gsignal.c:3547)
==25063== by 0x3DE402866C: g_signal_emit_valist (gsignal.c:3296)
==25063== by 0x3DE4028CCF: g_signal_emit_by_name (gsignal.c:3389)
==25063== by 0x41AA53: reemit_signal_VOID (virt-viewer-session-ovirt.c:211)
==25063== by 0x3DE400F942: _g_closure_invoke_va (gclosure.c:840)
==25063== by 0x3DE4027D87: g_signal_emit_valist (gsignal.c:3207)
==25063== by 0x3DE4028CCF: g_signal_emit_by_name (gsignal.c:3389)
==25063== 14 bytes in 1 blocks are definitely lost in loss record 623 of 9,502
==25063== at 0x4A0884D: malloc (vg_replace_malloc.c:263)
==25063== by 0x34561092F7: __vasprintf_chk (vasprintf_chk.c:82)
==25063== by 0x3DE3882F1A: g_vasprintf (stdio2.h:199)
==25063== by 0x3DE3862EDC: g_strdup_vprintf (gstrfuncs.c:509)
==25063== by 0x3DE3862F7B: g_strdup_printf (gstrfuncs.c:535)
==25063== by 0x40CBAE: virt_viewer_app_update_pretty_address (virt-viewer-app.c:1538)
==25063== by 0x40FB55: virt_viewer_app_free_connect_info (virt-viewer-app.c:1707)
==25063== by 0x40FBE9: virt_viewer_app_dispose (virt-viewer-app.c:1291)
==25063== by 0x3DE40144F7: g_object_unref (gobject.c:2981)
==25063== by 0x40C31A: main (remote-viewer-main.c:336)
==25063== 10 bytes in 1 blocks are definitely lost in loss record 491 of 9,502
==25063== at 0x4A0884D: malloc (vg_replace_malloc.c:263)
==25063== by 0x34561092F7: __vasprintf_chk (vasprintf_chk.c:82)
==25063== by 0x3DE3882F1A: g_vasprintf (stdio2.h:199)
==25063== by 0x3DE3862EDC: g_strdup_vprintf (gstrfuncs.c:509)
==25063== by 0x3DE3862F7B: g_strdup_printf (gstrfuncs.c:535)
==25063== by 0x40DE36: window_update_menu_displays_cb (virt-viewer-app.c:1640)
==25063== by 0x3DE383833F: g_hash_table_foreach (ghash.c:1524)
==25063== by 0x3DE400F663: g_closure_invoke (gclosure.c:777)
==25063== by 0x3DE40206D7: signal_emit_unlocked_R (gsignal.c:3547)
==25063== by 0x3DE402866C: g_signal_emit_valist (gsignal.c:3296)
==25063== by 0x3DE40287C1: g_signal_emit (gsignal.c:3352)
==25063== by 0x5772F95: gtk_widget_show (gtkwidget.c:3225)
==25063== 8,431 (72 direct, 8,359 indirect) bytes in 1 blocks are definitely lost in loss record 9,468 of 9,502
==25063== at 0x4A0884D: malloc (vg_replace_malloc.c:263)
==25063== by 0x3DE384D2BE: g_malloc (gmem.c:159)
==25063== by 0x3DE38616B1: g_slice_alloc (gslice.c:1003)
==25063== by 0x3DE3861C05: g_slice_alloc0 (gslice.c:1029)
==25063== by 0x3DE402F96F: g_type_create_instance (gtype.c:1872)
==25063== by 0x3DE40147A7: g_object_constructor (gobject.c:1849)
==25063== by 0x3DE4016260: g_object_newv (gobject.c:1632)
==25063== by 0x3DE40168AB: g_object_new (gobject.c:1542)
==25063== by 0x40C4BD: virt_viewer_util_load_ui (virt-viewer-util.c:41)
==25063== by 0x40C7EB: virt_viewer_auth_collect_credentials (virt-viewer-auth.c:43)
==25063== by 0x41B391: authenticate_cb (virt-viewer-session-ovirt.c:430)
==25063== by 0x3458C05E8F: ffi_call_unix64 (unix64.S:75)
==25063== 32 (16 direct, 16 indirect) bytes in 1 blocks are definitely lost in loss record 3,962 of 9,502
==25063== at 0x4A0884D: malloc (vg_replace_malloc.c:263)
==25063== by 0x3DE384D2BE: g_malloc (gmem.c:159)
==25063== by 0x3DE38616B1: g_slice_alloc (gslice.c:1003)
==25063== by 0x3DE38629F2: g_slist_append (gslist.c:222)
==25063== by 0x41483C: virt_viewer_window_init (virt-viewer-window.c:323)
==25063== by 0x3DE402FA05: g_type_create_instance (gtype.c:1892)
==25063== by 0x3DE40147A7: g_object_constructor (gobject.c:1849)
==25063== by 0x3DE4015D70: g_object_newv (gobject.c:1713)
==25063== by 0x3DE401655F: g_object_new_valist (gobject.c:1830)
==25063== by 0x3DE4016893: g_object_new (gobject.c:1545)
==25063== by 0x40DA34: virt_viewer_app_window_new (virt-viewer-app.c:590)
==25063== by 0x40E300: virt_viewer_app_constructor (virt-viewer-app.c:1336)
==30355== 4 bytes in 1 blocks are definitely lost in loss record 53 of 9,267
==30355== at 0x4A0884D: malloc (vg_replace_malloc.c:263)
==30355== by 0x3DE384D2BE: g_malloc (gmem.c:159)
==30355== by 0x3DE3862D0B: g_strdup (gstrfuncs.c:356)
==30355== by 0x3DE40360FC: value_copy_string (gvaluetypes.c:276)
==30355== by 0x3DE40340CA: g_value_transform (gvalue.c:535)
==30355== by 0x3FDAE621DD: gdk_screen_get_setting (gdkevents-x11.c:3022)
==30355== by 0x3FDB3C7415: gtk_settings_get_property (gtksettings.c:1152)
==30355== by 0x3DE4017A74: g_object_get_property (gobject.c:1289)
==30355== by 0x414991: virt_viewer_window_disable_modifiers (virt-viewer-window.c:616)
==30355== by 0x415922: virt_viewer_window_keyboard_grab (virt-viewer-window.c:931)
==30355== by 0x3DE400F942: _g_closure_invoke_va (gclosure.c:840)
==30355== by 0x3DE4027D87: g_signal_emit_valist (gsignal.c:3207)
Don't leak SPICE ticket
2012-05-17 Marc-André Lureau <marcandre.lureau@gmail.com>
spice: use weak references to display channel
Fix switch-host migration with Spice.
spice-gtk doesn't like channels staying around when they should be
destroyed/finalized, ie removed from session.
spice-gtk should probably learned to handle better the case of non
cooperating clients, and be able to dissociate a channel from a
session without waiting for it to be disposed, but for now, the
relation is quite tight.
2012-05-15 Daniel P. Berrange <berrange@redhat.com>
Avoid use of deprecated GTK3 pointer APIs
The gtk_widget_get_pointer() API is deprecated in GTK3 since it
is not aware of multiple pointers. Replace its usage in autoDrawer.c
with GdkDeviceManager and friends
Adapt to avoid use of deprecated GTK3 style & size APIs
The GtkStyle API has been deprecated in favour of GtkStyleContext.
Update ovBox.c to use the latter if building with GtK3. Also replace
use of the gtk_widget_size_request API with gtk_widget_get_preferred_size.
2012-05-15 Marc-André Lureau <marcandre.lureau@gmail.com>
Release v0.5.3
nsis: fix .nsis file paths
- look up for icons under the DESTDIR directory
- don't ship gstaudiofx, unneeded
- add missing libtasn
2012-05-14 Marc-André Lureau <marcandre.lureau@gmail.com>
dist: ship .ico in tarball
Some distros (a 4-letters) don't have icotool.
Let's ship the .ico in the tarball.
The build will fail if icoutil is not installed when
building from git or when the .ico is absent. The error
should be explicit.
nsis: IE policy to launch silentely remote-viewer
Add IE ElevationPolicy for the remote-viewer client.
http://msdn.microsoft.com/en-us/library/bb250462%28v=vs.85%29.aspx
nsis: fix removal of start menu directory
2012-05-08 Daniel P. Berrange <berrange@redhat.com>
Avoid race condition when disposing of app
When disposing of the VirtViewerApp, we free the hash table
containing the windows. This causes each window to be freed,
which in turn causes the visibility callback to be invoked.
This can then get NULL pointers from the self->priv->windows
usage.
Blank out priv->windows before unrefing the hashs and add
a check to ensure priv->windows is non-NULL.
2012-05-04 Daniel P. Berrange <berrange@redhat.com>
Ensure windows are destroyed when display closes
When running virt-viewer with the --reconnect argument, when
the session closes, the VirtViewerWindow instances were being
freed, but not the GtkWindow itself. So the orphaned window
stayed around doing nothing. The GtkBuilder instance was also
leaked.
Fix these two leaks & also add some debugging to help future
troubleshooting
2012-05-02 Daniel P. Berrange <berrange@redhat.com>
Change 'OK' button to 'Close' button in USB device selection
The USB device selection applies immediately, so the dialog
should be using 'Close' instead of 'OK' for its primary button
2012-04-27 Christophe Fergeau <cfergeau@redhat.com>
g_getenv returns a const string
When switching from getenv to g_getenv, 'doms' declaration
wasn't changed from char * to const char *, which causes
a gcc warning.
2012-04-26 Daniel P. Berrange <berrange@redhat.com>
Replace getenv/setenv with g_getenv/g_setenv for Win32 portability
2012-04-25 Daniel P. Berrange <berrange@redhat.com>
Add debugging when performing fullscreen auto-configuration
Refresh translations from transifex
Really fix debug output on glib >= 2.31
Fix debug output on glib >= 2.31
2012-04-23 Daniel P. Berrange <berrange@redhat.com>
Set the remote-viewer binary application name
Currently the window titles for remote-view have 'remote-viewer'
appended them. This is based off the argv[0] name. We should be
setting the GLib application name though, so we can get a localized
'Remote Viewer' string in the titlebar
Add support for raw IPv6 addresses in VNC & libvirt URIs
Support vnc://[x:y:z:]:5901/ for raw IPv6 addresses in URIs,
and qemu+ssh://root@[x:y:x:]:22/ for raw IPv6 addresses in
libvirt URIs
2012-04-19 Daniel P. Berrange <berrange@redhat.com>
Fix scaling of window to avoid integer truncation
Use round() instead of integer truncation when scaling the window,
to avoid floating point precision problems on i386
2012-04-18 Daniel P. Berrange <berrange@redhat.com>
Add a desktop file for launching remote-viewer
Enable automagic handling of spice:// URLs in firefox by
registering a desktop handler for remote-viewer with the
SPICE URI scheme
2012-04-17 Daniel P. Berrange <berrange@redhat.com>
Give remote-viewer priority over spicec for spice-xpi-client
Add manpage docs for the --attach option
Fix manpage to s/--fullscreen/--full-screen/
2012-04-17 Christophe Fergeau <cfergeau@redhat.com>
Fix automatic usb redir through controller
remote-viewer is currently trying to use
SpiceUsbDeviceManager::auto-connect to control whether USB devices
should be automatically connected or not. However, this property
is more or less an internal spice-gtk property which is toggled
by SpiceGtkSession when the SPICE widget gets/loses focus.
SpiceGtkSession has an "auto-usbredir" property which can be used
by applications to enable/disable automatic usb redirection through
SPICE. Since this property is helpfully bound to
VirtViewerSession::auto-usbredir, use this when the controller
is told to enable/disable USB redirection.
Without this change, automatic USB redirection will always get reenabled
as soon as there's a focus change since SpiceGtkSession::auto-usbredir
defaults to be enabled in spice-gtk.
2012-04-05 Daniel P. Berrange <berrange@redhat.com>
Ensure windres & icotool are present on Win32 builds
Builds are failing with an obscure error message
make[3]: Entering directory `/var/lib/builder/source-root/virt-viewer/build/icons'
GEN virt-viewer.ico
/bin/sh: -c: command not found
make[3]: *** [virt-viewer.ico] Error 127
This is because configure.ac does not enforce that icotool
is present on Win32.
* configure.ac: Mandate windres & icotool on Win32
Require F17 for spice in RPM builds
Exclude windows-cmdline-wrapper.c from some syntax check rules
Add Yonit to authors file
Fix some syntax violations in git.mk
2012-04-05 Zeeshan Ali (Khattak) <zeeshanak@gnome.org>
Minor simplification/optimization of VirtViewerDisplay
2012-04-04 Daniel P. Berrange <berrange@redhat.com>
Fix typo in variable names for Win32 command helper
Fix close of VNC displays
When clicking the close button on a virt-viewer window with
a VNC session open, while the VNC session terminates, the
window does not go away.
The problem is that the virt_viewer_session_vnc_disconnected
method never gets invoked. The close button triggers a call
to virt_viewer_session_clear_displays which unrefs the
VirtViewerDisplayVnc instance. This in turn triggers a call
to gtk_container_destroy, which destroys all widgets it
contains, ie the VncDisplay * object.
With the VncDisplay object in its dispose phase, no signals
will ever be emitted, thus the 'vnc-disconnected' signal
never gets seen.
The design issue is that VirtViewerDisplayVnc is assuming
it owns the VncDisplay, whereas in fact the real owner is
the VirtViewerSessionVnc object.
The solution is to introduce a new virt_viewer_display_close
method which can be used to de-parent the widget before
VirtViewerDisplay is unref'd.
The VirtViewerSessionVnc object also needs to hold a full ref
on the VncDisplay object, not merely a floating reference
* virt-viewer-display-spice.c, virt-viewer-display.c,
virt-viewer-display.h: Add virt_viewer_display_close
* virt-viewer-display-vnc.c: Deparent VNC widget in
virt_viewer_display_close impl
* virt-viewer-session-vnc.c: Improve logging
* virt-viewer-session.c: Call virt_viewer_display_close
before unrefing display
* virt-viewer-window.c: Improve logging
2012-04-04 Christophe Fergeau <cfergeau@redhat.com>
Propagate USB redirection controller messages
2012-04-03 Yonit Halperin <yhalperi@redhat.com>
Add support for the SPICE properties disable-effects & color-depth
2012-04-03 Christophe Fergeau <cfergeau@redhat.com>
build-sys: fix Windows specific LDFLAGS on non-mingw
2012-04-02 Marc-André Lureau <marcandre.lureau@gmail.com>
nsis: fix a few missing icons
nsis: add the remote-viewer cmdline wrapper
remote-viewer: make it a GUI/windows application with hybrid console
If the application can attach to its parent console, redirect
input/output. So that will work nicely with the command line wrapper.
Add a Windows command line wrapper
Add a small command line wrapper, to be able to call GUI/windows application from the console
2012-04-01 Marc-André Lureau <marcandre.lureau@gmail.com>
Disable mnemonics via gtk-enable-mnemonics settings
This has 2 advantages, and I can't figure any drawback:
- it fixes the issue of mnemonic hints being draw when pressing Alt
key (character underlined), even when they were disabled.
- it simplifies the code :)
Disable menu items that would fail when there is no display
build-sys: simplify autogen.sh
It should support NOCONFIGURE=1 ./autogen.sh && mingw32-configure
2012-03-30 Marc-André Lureau <marcandre.lureau@gmail.com>
build-sys: use git.mk to generate gitignore
This makefile is just fantastic, it forces you into good practices,
support various build targets (my windows builddir ignore the right
files etc..)
The more I use it, the more I like it.
win32: add a few Windows sepecific data
Add application icon and manifest
win32: clean-up the NSIS installer, allow user install
Fix recent --spice-controller regression, add error message
The current code will attempt to dereference args if
--spice-controller, even if args is NULL.
Let's not accept any extra argument/uri on the command line if using
the controller. Beside, the conditionnal block looks better outside of
the if condition.
2012-03-29 Hans de Goede <hdegoede@redhat.com>
usbredir: listen for device-error signal
2012-03-29 Marc-André Lureau <marcandre.lureau@gmail.com>
remote-viewer: press Enter to connect in dialog
Remove unused variable i
remote-viewer: add a simple connection dialog
If the user doesn't provide URI, let's show a simple dialog to enter it.
Also save & list recently used URLs in that dialog.
Fix g_thread_init deprecation warning
Although the doc says it is only deprecated since >2.32, it's actually
>2.31 according to glib git log.
2012-03-21 Marc-Andre Lureau <marcandre.lureau@redhat.com>
Do not warn if the display is shown and not ready
Lower warning message to debug level. There are various racy ways it
ends up calling show_display although the display is not yet
ready. This is not such a big problem, although it would be nice to
handle this case better
Notify focus state when the foreign menu title is set
The current code only inform of focus state when the listener is ready.
spice-gtk controller code lacks signal when a client connects, but a
client will set the title when connected and send a notify signal.
Use this event to notify of application focus state.
Do not try to unref NULL menu
Don't leak foreign menu
The RemoveViewer object will have its own ref.
2012-03-21 Marc-André Lureau <marcandre.lureau@gmail.com>
spice: handle switch-host event
Do not disconnect session when switching host (non-seamless migration
method).
Also, handle a bit better main channel events and do not disconnect on
unknown events, however raise unhandled event message to warning
level.
spice: remove usage of deprecated audio api
Display correct key bindings to release cursor
If the accels are enabled (with Spice controller custom bindings),
show the configured keybinding in the title bar.
spice: implement --fullscreen=auto-conf
- auto-conf is an optionnal argument to --fullscreen:
it will set the guest display configuration to match the client
display configuration, by sending the client monitors size and
position to capable guests.
2012-03-18 Marc-André Lureau <marcandre.lureau@gmail.com>
Fix indentation
2012-03-16 Marc-André Lureau <marcandre.lureau@gmail.com>
Do not crash so easily when given invalid uri
'remote-viewer foobar' shouldn't crash
2012-03-13 Daniel P. Berrange <berrange@redhat.com>
Updated translations
2012-03-09 Marc-André Lureau <marcandre.lureau@gmail.com>
Make sure we call g_thread_init()
GThread is needed by spice-gtk
Notify of focus state when a client connects
The current code notifies the controller when the remote-viewer
application starts, but not when the client is connected. We should do
the later instead
2012-03-09 Daniel P. Berrange <berrange@redhat.com>
Update NEWS for 0.5.2 release
Import newer translations from transifex
Fix libvirt/SPICE min versions
We require libvirt >= 0.9.7 to get virDomainOpenGraphics
We require spice-gtk >= 0.11 to get the fix for dealing with
authentication over an SSH tunnel
We requires spice-protocol >= 0.10.1 to get a constant
required by USB redirection
2012-03-08 Marc-André Lureau <marcandre.lureau@gmail.com>
Add a send-key menu in fullscreen
2012-03-07 Marc-André Lureau <marcandre.lureau@gmail.com>
build: fix autogen message
When running ./autogen.sh on a pristine git checkout, I got:
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
You should add the contents of '/usr/share/aclocal/intltool.m4' to 'aclocal.m4'.
2012-03-07 Hans de Goede <hdegoede@redhat.com>
virt-viewer-window: Don't try to resize non visible windows
Trying to resize not visible windows leads to the following being printed
to the console:
Gdk-CRITICAL **: IA__gdk_window_get_origin: assertion `GDK_IS_WINDOW (window)'
This gets triggered by the gdk_screen_get_monitor_geometry() call in
virt_viewer_window_resize()
virt-viewer-window: Add show / hide utility functions
virt-viewer-window: Move checks before resize to virt_viewer_window_resize
virt-viewer-window: Remove useless tests for priv->window != NULL
priv->window gets set on init and never unset, so there is no need to check
for it.
2012-03-07 Daniel P. Berrange <berrange@redhat.com>
Update AUTHORS file
Refresh translations
2012-03-06 Hans de Goede <hdegoede@redhat.com>
virt-viewer-window: Add a USB device selection to the fullscreen menu (v2)
Note this button only gets shown on USB redir capable virtual machines.
Changes in v2:
-Use gtk_widget_set_visible for simpler code
window: Call virt_viewer_app_quit instead of gtk_main_quit
When quiting from the fullscreen menu call virt_viewer_app_quit instead of
gtk_main_quit so that the session gets properly disconnected before quiting.
virt_viewer_app_quit: Cleanly close the connection before quiting
Even though the previous patches in this series ensure that the session
gets properly finalized, we still need to wait for the disconnect signal,
as spice-glib uses co-routines which need some time to cleanly close the
connection / session.
session-spice: Delay the disconnected signal till all channels are closed
Before this patch session-spice would emit the disconnected signal as soon
as the main channel is closed, but other channels may still be open at
that time and raising the disconnected signal usally leads to the app class
calling gtk_main_quit, at which point the other channels never get properly
finalized (as there co-routines still hold a reference to them).
This is esp. bad for usbredir channels as these re-attach the kernel driver
for redirected devices when finalized. So exiting without properly finalizing
them leads to the formerly redirected devices not being usuable until the
driver is manually reloaded or the device is unplugged and re-plugged
(the kernel does not automatically re-bind kernel drivers when userspace
closes a usbfs node).
This patch fixes this by delaying the emitting of the disconnect signal
until the last channel has been destroyed.
virt-viewer-app: unref the session on dispose
With this patch combined with the previous patches in this series, the
VirtViewerSession (finally) gets properly finalized on exit.
virt-viewer-display: Use a borrowed reference to session
Before this patch there was a cyclic reference between VirtViewerSesion and
VirtViewerDisplay, since all VirtViewerDisplays are created / destroyed by
VirtViewerSession it is safe to assume that lifetime of VirtViewerSession >=
VirtViewerDisplay, so VirtViewerDisplay can take a borrowed reference
breaking the circle, and allowing proper cleanup on exit.
Note that there is no g_object_unref removed from virt-viewer-display, this
because there is no finalize / dispose and before this patch
VirtViewerDisplay never unref-ed the reference it hold to the session.
virt-viewer-window: Use a borrowed reference to app
Before this patch there was a cyclic reference between VirtViewerApp and
VirtViewerWindow, since all VirtViewerWindows are created / destroyed by
VirtViewerApp it is safe to assume that lifetime of VirtViewerApp >=
VirtViewerWindow, so VirtViewerWindow can take a borrowed reference
breaking the circle, and allowing proper cleanup on exit.
virt-viewer-app: main_window is part of our windows hashtable
This means that:
1) There is no need to explictly set its title separately
2) It is unref-ed when we do g_hash_table_unref(priv->windows), so it
should not be unref-ed separately otherwise it is unref-ed twice!
Notice that 2 was never a problem because of circular references
between VirtViewerApp and VirtViewerWindow, but once the follow
up patch to this one breaks the circle 2 becomes an issue.
session-spice: dispose should chain up to dispose not finalize!!
usbredir: Gnome HIG-ify USB device selection dialog
These changes match the changes already made to the spice-gtk
usb device selection widget to match the spacing advised by the Gnome HIG.
usbredir: Shrink the usb device selection dialog when devices are unplugged
2012-03-05 Christophe Fergeau <cfergeau@redhat.com>
Don't attempt to translate ""
The empty string has a magic meaning for gettext, it's used to
store a translation header with all kind of information about the
po file. This is not something we want to use as a window title, so
change to _("") to "" when we want an empty string.
Fix path to spice-controller.h
2012-03-01 Daniel P. Berrange <berrange@redhat.com>
Remove trailing blank line
2012-03-01 Marc-André Lureau <marcandre.lureau@gmail.com>
fix make distcheck
Prepare for release 0.5.2
update .mailmap
2012-03-01 Marc-Andre Lureau <marcandre.lureau@redhat.com>
remote-viewer: support spice foreign menu
2012-03-01 Marc-André Lureau <marcandre.lureau@gmail.com>
Add property app:has-focus
Fix compilation with gtk 2.18
spice: fix connecting via ssh to a password-protected server
spice_session_connect() will attempt to connect directly to the
server, we need to continue calling spice_session_open_fd() for ssh
tunnel to work.
spice: fix double unref of main channel
When doing unref() on a channel, channel-destroy signal may be emitted
during object dispose time, and it will attempt to unref() the channel
again likely leading to a crash.
It may be that spice-gtk should have a different/simpler object
life-cycle model, but it's also a good assumption to not take strong
references on the channels, but just keep a weak reference as the
session is really the channel life-cycle manager.
https://bugzilla.redhat.com/show_bug.cgi?id=797082
2012-02-27 Daniel P. Berrange <berrange@redhat.com>
Import translations
2012-02-23 Marc-André Lureau <marcandre.lureau@gmail.com>
nsis: set HKCU "Software\spice-space.org\spicex\client"
With recent RHEV portal plugin, the Spice client is chosen according
to this key.
2012-02-22 Marc-André Lureau <marcandre.lureau@gmail.com>
remote-viewer: add smartcard controller message
spice: teach customizable key bindings with controller
Tested with RHEVM 3.0 instance with custom bindings for fullscreen &
ungrab.
Small code simplification
Use the accelgroup to define key bindings
With accelgroups, we can redefine the keybindings
Add hidden menu smartcard remove/insert and release-cursor
Add virt_viewer_app_get_session()
spice: implement smartcard-{insert,remove} virtual methods
Add smartcard-{insert,remove} and release-cursor virtual methods
Do not disable accelgroup if accels are enabled
Add VirtViewerApp:enable-accel property
Require an accel group for full-screen menu
Bump Gtk depedency to 2.18, since we already use symbols from it.
2012-02-17 Daniel P. Berrange <berrange@redhat.com>
Prepare for release 0.5.1
2012-02-16 Daniel P. Berrange <berrange@redhat.com>
Remove virt-viewer.pot from git, as it is generated dynamically
Add back compat for GObject 2.22 which lacks GBinding
Relax GTK-VNC version again
A previous commit needlessly increased the min required GTK-VNC
Only link remote-viewer program against SPICE controller
Remove use of a libtool convenience library
The use of a libtool convenience library causes some platforms to
loose the ability to use the GNU_RELRO security feature in the
resulting binary. Refactor the makefile to simply compile the
common files twice, once for virt-viewer & once for remote-viewer
Import latest translations from transifex
2012-02-15 Daniel P. Berrange <berrange@redhat.com>
Adjust POTFILES.in check to strip type prefix
Add transifex configuration file
2012-02-14 Daniel P. Berrange <berrange@redhat.com>
Fix inclusion of GtkBuilder files in virt-viewer.pot
Refresh translation files
Update for release 0.5.0
2012-02-14 Marc-André Lureau <marcandre.lureau@gmail.com>
First %d in controller title should be substituted with window nth
Add libp11-kit-0.dll to nsis script
2012-02-14 Daniel P. Berrange <berrange@redhat.com>
Set pretty icon for remote-viewer windows too
Don't hardcode 'localhost' in no @listen parameter is given
If no @listen parameter is given, we must not hardcode 'localhost'
since we can't assume we are running on the same host. Instead use
the hostname from the connection URI
Extract tlsPort for SPICE and use it to enable secure connections
2012-02-08 Daniel P. Berrange <berrange@redhat.com>
Don't do whitespace checks on icons
Set transient parent for screenshot dialog
Ensure auth popup windows have correct transient parent
2012-02-08 Marc-André Lureau <marcandre.lureau@gmail.com>
Make the password field activates default widget
When pressing "Enter", the default auth dialog action isn't activated.
Setting activates_default to TRUE fixes this issue.
Do not resize guest desktop if !auto-resize
If auto-resize is enabled, the guest desktop size will be resized to
match current window*zoom size.
This can be a problem if the user explicitely set the desktop size to
a different resolution and want to keep it. Disabling auto-resize
sounds like a simple way to allow that.
Resize Spice guest display to the container size
The SpiceDisplay doesn't receive the full allocation, because
VirtViewerDisplay maintains current aspect ratio. However, the guest
display can be resize up to its container size.
This fixes going full-screen and not getting native resolution for
instance.
2012-02-08 Daniel P. Berrange <berrange@redhat.com>
Ensure About dialog has transient hints setup
Import a pretty icon for virt-viewer application
Re-added GtkBuilder XML files to POTFILES.in
Adapt syntax-check rule to allow XML files in POTFILES.in and
re-add the GtkBuilder XML files
Implement SPICE desktop resizing that takes account of zoom level
The standard SPICE widget guest resize implementation does not
take into account the zoom level settings in virt-viewer, because
it has no knowledge of this functionality. The guest resize can,
however, be done by calling spice_main_set_display() directly.
This allows virt-viewer to resize the guest taking into account
zoom levels.
ie, if virt-viewer is run with --zoom 50 and the window
is resized to 400x300, then the guest agent should
be told to set its resolution to 800x600
2012-02-07 Daniel P. Berrange <berrange@redhat.com>
Revert support for resizing guest desktop
The SpiceDisplay widget has built-in support for resizing the
guest desktop, but this does not know that virt-viewer has a
zoom level setting. This makes the virt-viewer zoom completely
inoperable. Revert use of the 'resize-guest' property.
2012-02-06 Marc-André Lureau <marcandre.lureau@gmail.com>
Add spice-xpi-client-remote-viewer alternative
man: add remote-viewer man page
2012-02-06 Daniel P. Berrange <berrange@redhat.com>
Import GNULIB rules for syntax checking code
Add config.h to every source file
Use exit() constants
copyright fix
End of file whitespace cleanup
Update POTFILES.in
Replace @FOO@ with $(FOO) in all Makefile.am
Update copyright headers
Remove useless if() before free()
Update AUTHORS file
Simplify no-op debug macro & fix plugin header
Fix makefile.am subsitutions for plugin
Convert TABS to spaces & reindent everywhere
2012-02-06 Hans de Goede <hdegoede@redhat.com>
Only make the USB device selection sensitive when the vm is USB capable
Add a menu entry for USB device selection
2012-02-06 Marc-André Lureau <marcandre.lureau@gmail.com>
Grab the focus when showing the display
Override the grab_focus() method in the display class. Since both VNC
and Spice displays are the direct child, let's just grab the child.
It can be that this behaviour need to be overriden if Spice or VNC
display become more complex (using sub-childs or different objects)
2012-01-31 Daniel P. Berrange <berrange@redhat.com>
Ignore more generated files
2012-01-31 Guannan Ren <gren@redhat.com>
Disconnect virt-viewer when receiving signal session-cancelled
Register a new signal session-cancelled
Tune the first argument in calls to g_type_class_add_private()
2012-01-31 Daniel P. Berrange <berrange@redhat.com>
Support for virDomainOpenGraphics API
Add a new flag --attach, which instructs virt-viewer to attach
to the target display using virDomainOpenGraphics, instead of
initiating a VNC/SPICE connection directly.
Make VNC support opening connections based on URI
Adapt remote-viewer so that it builds without SPICE
2012-01-31 Marc-André Lureau <marcandre.lureau@redhat.com>
Add virt-viewer.nsis
Use ${DESTDIR} variable and @prefix@ to look for files.
Can't easily be generated, it has too much customization.
2012-01-31 Marc-André Lureau <marcandre.lureau@gmail.com>
Enable spice auto-usbredir
Remove usage of deprecated property
Add error dialog for USB redirection failure
Resize guest desktop with SPICE
This is the method we prefer, even though we can't keep aspect ratio.
We could eventually support aspect ration in spice-gtk.
2012-01-31 Marc-André Lureau <marcandre.lureau@redhat.com>
build: make libvirt optionnal
2012-01-31 Marc-André Lureau <marcandre.lureau@gmail.com>
Use a first letter capital in help
The GLib/GNOME convention seems to have first letter as capital for
option description strings.
2012-01-31 Marc-André Lureau <marcandre.lureau@redhat.com>
Add spice_get_option_group()
Add spice controller support in remote-viewer
Usage is simply "remote-viewer --spice-controller"
Add remote-viewer program
This program is meant for direct URI connections.
ex: remote-viewer vnc://uri
2012-01-30 Marc-André Lureau <marcandre.lureau@gmail.com>
Add a few property getters, used by controller
- virt_viewer_app_get_windows()
- virt_viewer_window_get_builder()
- "VirtViewerSessionSpice:spice-session" property
build: use AM_GLIB_GNU_GETTEXT
Using intltool macro only causes build issues on exotic platforms,
such as MinGW.
As long as this bug isn't fixed, we should use AM_GLIB_GNU_GETTEXT
https://bugs.launchpad.net/intltool/+bug/398571
NB this partially reverts
3473c4bb49adc0caca58dc1a8b6ce81c6870558a
The difference is the ordering of the rules. With AM_GLIB_GNU_GETTEXT
appearing after IT_PROG_INTLTOOL, the --disable-nls arg to configure
is broken. Thus AM_GLIB_GNU_GETTEXT is called first in this change.
2012-01-30 Marc-André Lureau <marcandre.lureau@redhat.com>
Make virt_viewer_activate() a vfunc
since other equivalent methods are already overridable.
Add window-added & window-removed signals
Use graphical URI for connection
If specified, use URI for connection details
Add virt_viewer_session_open_uri
build: replace deprecated functions
2012-01-30 Daniel P. Berrange <berrange@redhat.com>
Add support for --system arg to autogen.sh
2011-11-09 Daniel P. Berrange <berrange@redhat.com>
Prep for 0.4.2 release
2011-11-07 Daniel P. Berrange <berrange@redhat.com>
Automatically generate changelog from GIT history during make dist
2011-11-07 Marc-André Lureau <marcandre.lureau@redhat.com>
Update POTFILES.in, fix make distcheck
2011-11-07 Daniel P. Berrange <berrange@redhat.com>
Ignore some more generated files
2011-11-07 Marc-André Lureau <marcandre.lureau@redhat.com>
build: make gtk-vnc optional
2011-11-07 Daniel P. Berrange <berrange@redhat.com>
Require GTK-VNC 0.4.3 and remove redundant realize() call
Remove call to gtk_widget_realize for the GTK-VNC widget. Requires
GTK-VNC >= 0.4.3
2011-11-07 Marc-André Lureau <marcandre.lureau@redhat.com>
Emit display-desktop-resize from set_desktop_size()
2011-11-07 Daniel P. Berrange <berrange@redhat.com>
Don't include INSTALL file in GIT
Revert 1a56de3acad6a19fd958fae9278cf1c97fdabb18
The GLIB2 check previously removed was misleading because it in
fact checked for gmodule-export-2.0 which is needed to export
the signal handlers. Revert the previous commit, but rename the
var to GMODULE2 to make it clearer
Always use canonical URI from libvirt connection
The URI we feed into libvirt may be an alias, so always query the
actual URI used internally
2011-11-04 Daniel P. Berrange <berrange@redhat.com>
Update automated build to test both GTK2 and GTK3 builds
Update mingw32 RPM specfile to use GTK3 on F15 or later
Remove pkgconfig check for GLIB2 since it is implied by GTK2/3
2011-11-03 Daniel P. Berrange <berrange@redhat.com>
Fix configure arg for disabling spice
Print configuration summary
2011-10-11 Daniel P. Berrange <berrange@redhat.com>
Fix broken keycombos for F9->F12 menu
The table for sending C-A-Fn to guests had messed up mappings
for F9->F12
Wire up SpiceDisplay grab signals
To ensure that we can put the key release sequence message in the
title bar, wire up VirtViewerDisplaySpice to the grab signals
in SpiceDisplay
Fix setting of window title with --wait
When waiting for a VM to appear or start, set the initial window
title to the command line arg. When the VM actually appears then
update it to the real VM name
2011-09-28 Daniel P. Berrange <berrange@redhat.com>
Fix crash from previous commit when using UNIX sockets
Code in the previous commit would use 'ghost' even when it was
NULL, as with UNIX domain socket based connections.
2011-09-19 Daniel P. Berrange <berrange@redhat.com>
Fix hostname when XML gives a wildcard address
When the guest XML contains a wildcard address like 0.0.0.0 or ::,
we can't directly use connect() on it. Instead we have to use the
hostname/IP from the libvirt URI.
2011-09-16 Daniel P. Berrange <berrange@redhat.com>
Propagate primary window zoom level to secondary windows
Ensure that all windows get a default zoom level of 100. Propagate
the primary window's zoom level to all secondary windows when
initially creating them
Fix setting of window title with domain name
2011-08-16 Daniel P. Berrange <berrange@redhat.com>
Fix setting of initial zoom level on display
2011-08-16 Guido Günther <agx@sigxcpu.org>
ff callbacks must be invoked from a clean stack
If 'ff' callbacks are invoked directly from the remove
callback they will likely deadlock in libvirt. They must
be invoked from a clean stack, so switch to using a
glib idle callback.
2011-08-14 Guido Günther <agx@sigxcpu.org>
Don't print (null) as user
Don't print incorrect port numbers
The port isn't 22 when we connect to an alternate port given in
.ssh/config.
Don't hardcode ssh port to 0
Many thanks to Luca Capello <luca@pca.it> for debugging this.
2011-08-12 Daniel P. Berrange <berrange@redhat.com>
Fix inverted sshport test that broke SSH tunnelling
2011-08-04 Marc-André Lureau <marcandre.lureau@redhat.com>
Return if xmlParseURI() failed, instead of crashing
Lookup UI file correctly, to fix Windows support
Mark exported function for gtkbuild to lookup on Windows
Make title more translatable and using application name
Use g_printerr for errors instead of fprintf(stderr,..)
Lower severity of unhandled Spice events
Add virt_viewer_app_show_display()
Similar to previous virt_viewer_app_show_status().
Used later on by Spice controller to switch between display and status.
Fix fullscreen should hide taskbar on Windows
2011-08-04 Daniel P. Berrange <berrange@redhat.com>
Update for 0.4.1 release
Update authors & copyright dates
Fix sort order of displays submenu
2011-08-03 Guido Günther <agx@sigxcpu.org>
Don't hardcode SSH port to 22
To allow $HOME/.ssh/config to override the default SSH port,
don't hardcode '-p 22' in the command line.
2011-08-03 Pavel Raiskup <praiskup@redhat.com>
Remove unreachable condition in authentication dialog
2011-07-26 Daniel P. Berrange <berrange@redhat.com>
Remove duplicated struct definition
2011-07-26 Marc-André Lureau <marcandre.lureau@redhat.com>
If only one display, fullscreen should be on the current display
Show status on all open windows
The split virt_viewer_notebook_show_status() to
virt_viewer_notebook_show_status_va() is unnecessary
in the end, but it's more future-proof.
Add a "Displays" submenu, and warn when closing last display
Don't ignore creation of secondary displays
Use app fullscreen property instead of app.start() argument
Implement app_set_fullscreen() to go over existing windows
Show display and rise its window when we have the display show hint
Track event for Spice, and imitate it for VNC.
Change enter/leave fullscreen to take/restore position
That allow positionning windows in multi-head.
Also, get rid of window_state_cb, since it's impossible to
properly catch the event to do the right thing, ie move to a different
screen before go full-screen, or disallow it in case nb physical
monitors < nb virtual monitors.
Add nth window to virt_viewer_app_window_new()
Introduce fullscreen property and virt_viewer_app_set_fullscreen()
Let virt_viewer_notebook_show_status take varags
Status messages can be translated
Add show-hint property to display
Split VirtViewerApp window into VirtViewerWindow
2011-07-22 Marc-André Lureau <marcandre.lureau@redhat.com>
Inherit from VirtViewerApp for VirtViewer
Make it a real GObject.
The parts specific to virt should go in virt-viewer.c
Turn VirtViewer into a VirtViewerApp object
Split virt_viewer_start() and virt_viewer_new()
Split virt_viewer_activate() and virt_viewer_set_domain()
Split virt_viewer_create_session() out of virt_viewer_extract_connect_info()
For future reusability
Reorder _VirtViewer to make it easier to split with RemoteViewer
Extract scheme in virt_viewer_extract_host()
Needed for remote-viewer.
2011-07-18 Daniel P. Berrange <berrange@redhat.com>
Remove use of AM_GLIB_GNU_GETTEXT
Since we already invoke the intltool macros, also invoking
AM_GLIB_GNU_GETTEXT is wrong and causes problems with the
later makefile rules
2011-07-12 Daniel P. Berrange <berrange@redhat.com>
Fix build requirements for GTK3
Remove bogus hardcoded check for GTK2
Disable SPICE unless on x86 architectures
Fix compat with GTK 2.18.0
Updates for 0.4.0 release
Remove virt-viewer-priv.h from sources, since it is gone
Remove duplicated typedefs
Annotate unused variables
Fix leak of graphics type attribute from XML
Fix leak of command line arguments
2011-07-11 Daniel P. Berrange <berrange@redhat.com>
Split pull part of VirtViewerDisplay out into VirtViewerSession
To facilitate introduction of multi-head support, pull some of
the VirtViewerDisplay class out into a new VirtViewerSession
class.
Avoid (null) in titlebar
Fix colour of status label to show up on black background
Fix reconnecting of SPICE display
2011-07-11 Marc-André Lureau <marcandre.lureau@redhat.com>
Fill space on the display alignment with black
Add support for --fullscreen option
Skip non-primary monitors in SPICE
2011-07-11 Daniel P. Berrange <berrange@redhat.com>
Remove circular dependancy between VirtViewerDisplay and VirtViewer
Add many signals to VirtViewerDisplay which are emitted when various
events occur. This lets us remove all the code in the VirtViewerDisplay
subclasses which call back into VirtViewer methods. Instead VirtViewer
can simply connect signals to the display
Turn VirtViewerDisplay into a proper Gtk widget
Turn VirtViewerDisplay into a Gtk widget instead of just a GObject,
by merging the functionality from VirtViewerAlign
2011-07-11 Daniel P. Berrange <dan@berrange.com>
Update to optionally build with GTK3
2011-07-01 Daniel P. Berrange <dan@berrange.com>
Replace use of GtkAlignment with a custom align widget
To use the GtkAlignment we have to play evil tricks overriding
its size request, to make it reallocate the child to the preferred
size we desire based on the virtual desktop size + zoom level.
By replacing the GtkAlignment with a custom widget we can
directly implement the layout/sizing semantics we want without
playing stupid games
Introduce standard naming convention to files & methods
All source files must be named
virt-viewer-XXXX
All methods named
virt_viewer_XXX
2011-07-01 Daniel P. Berrange <berrange@redhat.com>
Fix some compile warnings
Convert from Glade to GtkBuilder
Refactor configure.ac to pull out required version
Enable use of scaling from spice >= 0.6
Make the SPICE widget operate in the same way as the VNC widget
with display scaling, and auto-resize, but preserving guest
aspect ratio
Hide menu bar on fullscreen & add a hiding toolbar
* src/Makefile.am, src/view/autoDrawer.c, src/view/autoDrawer.c
src/view/drawer.c, src/view/drawer.h, src/view/ovBox.c,
src/view/ovBox.c: Import auto-drawer from vinagre
* src/viewer-priv.h, src/viewer.c, src/viewer.glade,
src/display-vnc.c: Insert an auto-drawer above the
notebook and display an auto-hiding toolbar when fullscreen
2011-06-30 Daniel P. Berrange <berrange@redhat.com>
Add message about whether it is VNC or SPICE display
Add some useful data for the --verbose flag
2011-05-23 Daniel P. Berrange <berrange@redhat.com>
Fix re-connect after authentication failure
viewer->display will be non-NULL if we have already attempted a
connection. So, remove the check for it being NULL, and instead
skip the widget setup step.
2011-05-23 Jiri Denemark <Jiri.Denemark@gmail.com>
Add support for listen attribute
Virt-viewer now parses listen attribute from graphics element to be able
to connect to domains configured with explicit listen address:
<graphics type='vnc' port='-1' autoport='yes' listen='123.45.67.89'/>
2011-05-23 Daniel P. Berrange <berrange@redhat.com>
Replace .hgignore with .gitignore
2011-02-21 Daniel P. Berrange <dan@berrange.com>
Added tag release-0.3.1 for changeset f71b32a6a583
Updates for 0.3.1 release
Fix typo in SPICE configure setup
Added tag release-0.3.0 for changeset 807203083e74
Updates for 0.3.0 release
Fix misc RPM specfile bugs
2011-02-11 Daniel P. Berrange <dan@berrange.com>
Merge heads
Disable mozilla plugin since it doesn't build currently
Enable SPICE in Fedora 15 or later
2011-02-08 yurchor <yurchor@fedoraproject.org>
l10n: Updates to Ukrainian (uk) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2011-02-08 elsupergomez <elsupergomez@fedoraproject.org>
l10n: Updates to Spanish (Castilian) (es) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2011-02-07 Daniel P. Berrange <dan@berrange.com>
Update pkg-config check for spice-gtk library
2011-02-04 warrink <warrink@fedoraproject.org>
l10n: Updates to Dutch (Flemish) (nl) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2011-02-04 raven <raven@fedoraproject.org>
l10n: Updates to Polish (pl) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
l10n: Updates to Polish (pl) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2011-02-03 Daniel P. Berrange <dan@berrange.com>
Fix waiting for VM based on UUID
Support connections over UNIX sockets
Avoid fetching XML document multiple times when extracting graphics
2011-01-29 fdaluisio <fdaluisio@fedoraproject.org>
l10n: Updates to Italian (it) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2011-01-28 tomspur <tomspur@fedoraproject.org>
l10n: Updates to German (de) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2011-01-12 andreyjktl <andreyjktl@fedoraproject.org>
l10n: Updates to Russian (ru) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2011-01-10 elsupergomez <elsupergomez@fedoraproject.org>
l10n: Updates to Spanish (Castilian) (es) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-12-21 jassy <jassy@fedoraproject.org>
l10n: Updates to Panjabi (Punjabi) (pa) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-12-16 warrink <warrink@fedoraproject.org>
l10n: Updates to Dutch (Flemish) (nl) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-12-15 raven <raven@fedoraproject.org>
l10n: Updates to Polish (pl) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-12-10 Marc-André Lureau <marcandre.lureau@redhat.com>
build: make spice-gtk dependency optional
2010-11-30 Marc-André Lureau <marcandre.lureau@redhat.com>
viewer: add support for spice resize-guest
And also turn on clipboard sharing.
viewer: Add support for Spice
2010-11-19 Marc-André Lureau <marcandre.lureau@redhat.com>
viewer: generalize extract_port() into viewer_extract_xpath_string()
viewer: silence a few warnings of unused variables
viewer: split vnc display creation out of viewer_activate()
2010-12-14 Daniel P. Berrange <dan@berrange.com>
Improve auth dialog message when no address is available
2010-11-17 tombo <tombo@fedoraproject.org>
l10n: Updates to Italian (it) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-10-04 giallu <giallu@fedoraproject.org>
l10n: Updates to Italian (it) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-09-30 aron <aron@fedoraproject.org>
l10n: Updates to Chinese (China) (zh_CN) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-08-10 bozzo <bozzo@fedoraproject.org>
l10n: Updates to French (fr) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-08-03 warrink <warrink@fedoraproject.org>
l10n: First Dutch translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-07-22 ankit <ankit@fedoraproject.org>
l10n: Updates to Gujarati (gu) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-07-09 Daniel P. Berrange <dan@berrange.com>
Merge heads
2010-07-09 Ronnie Sahlberg <ronniesahlberg@gmail.com>
Misc fixes to command line args in virt-viewer manpage
Fix three issues with the manpage for virt-viewer :
* Short option for --reconnect is -r, not -w
* Show that the short option for zoom takes an argument
* Add the --debug argument.
2010-07-06 raven <raven@fedoraproject.org>
l10n: Updates to Polish (pl) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-07-06 elsupergomez <elsupergomez@fedoraproject.org>
l10n: Updates to Spanish (Castilian) (es) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-07-05 Ronnie Sahlberg <ronniesahlberg@gmail.com>
Add support for zoom levels
Add a menu for zooming in/out of the virtual desktop.
Add a --zoom command line to set the initial zoom level.
Defaults to 100% zoom at startup
2010-07-05 Daniel P. Berrange <dan@berrange.com>
Add all current languages to LINGUAS file
No locale files were being installed since all the
languages were missing in LINGUAS
2010-06-27 zoltanh721 <zoltanh721@fedoraproject.org>
l10n: Updates to Hungarian (hu) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-06-25 htaira <htaira@fedoraproject.org>
l10n: Updates to Japanese (ja) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-06-09 htaira <htaira@fedoraproject.org>
l10n: Updates to Japanese (ja) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-04-14 mvdz <mvdz@fedoraproject.org>
l10n: Updates to Ukrainian (uk) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-04-01 enshahar <enshahar@fedoraproject.org>
l10n: Updates to Korean (ko) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-03-30 webappz <webappz@fedoraproject.org>
l10n: Updates to Hungarian (hu) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
l10n: Updates to Hungarian (hu) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
l10n: Updates to Hungarian (hu) translation
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-03-22 mvdz <mvdz@fedoraproject.org>
l10n: Added Ukrainian translation.
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-03-14 amitakhya <amitakhya@fedoraproject.org>
l10n: Adding Assamese translations.
Transmitted-via: Transifex (translate.fedoraproject.org)
2010-02-26 runab <runab@fedoraproject.org>
Sending translation for po/bn_IN.po
2010-02-24 rajesh <rajesh@fedoraproject.org>
Sending translation for po/hi.po
2010-02-20 snicore <snicore@fedoraproject.org>
Sending translation for po/hu.po
2010-02-08 anipeter <anipeter@fedoraproject.org>
Sending translation for po/ml.po
2010-02-01 mgiri <mgiri@fedoraproject.org>
Sending translation for po/or.po
2010-01-29 ifelix <ifelix@fedoraproject.org>
Sending translation for po/ta.po
2010-01-29 jassy <jassy@fedoraproject.org>
Sending translation for Punjabi
2010-01-28 sandeeps <sandeeps@fedoraproject.org>
Sending translation for po/mr.po
2010-01-28 shanky <shanky@fedoraproject.org>
Sending translation for po/kn.po
2010-01-28 giallu <giallu@fedoraproject.org>
Sending translation for Italian
2010-01-28 jassy <jassy@fedoraproject.org>
Sending translation for po/pa.po
2010-01-28 kkrothap <kkrothap@fedoraproject.org>
Sending translation for po/te.po
2010-01-28 mospina <mospina@fedoraproject.org>
Sending translation for Korean
2010-01-25 Daniel P. Berrange <berrange@redhat.com>
Remove bogus it_IT.po file, correct name was it.po
2010-01-24 tchuang <tchuang@fedoraproject.org>
Sending translation for po/zh_TW.po
2010-01-24 raven <raven@fedoraproject.org>
Sending translation for po/it.po
2010-01-23 giallu <giallu@fedoraproject.org>
Sending translation for po/it_IT.po
2010-01-22 hedda <hedda@fedoraproject.org>
Sending translation for German
2010-01-22 leahliu <leahliu@fedoraproject.org>
Sending translation for Chinese (Simplified)
2010-01-22 khasida <khasida@fedoraproject.org>
Sending translation for po/ja.po
2010-01-22 mospina <mospina@fedoraproject.org>
Sending translation for po/ko.po
Sending translation for Spanish
2010-01-22 ypoyarko <ypoyarko@fedoraproject.org>
Sending translation for Russian
2010-01-22 gcintra <gcintra@fedoraproject.org>
Sending translation for po/pt_BR.po
2010-01-22 samfreemanz <samfreemanz@fedoraproject.org>
Sending translation for French
2010-01-22 hedda <hedda@fedoraproject.org>
Sending translation for po/de.po
2010-01-22 leahliu <leahliu@fedoraproject.org>
Sending translation for Chinese (Simplified)
2010-01-21 leahliu <leahliu@fedoraproject.org>
Sending translation for po/zh_CN.po
2010-01-21 ypoyarko <ypoyarko@fedoraproject.org>
Sending translation for po/ru.po
2010-01-21 mospina <mospina@fedoraproject.org>
Sending translation for po/es.po
2010-01-21 swkothar <swkothar@fedoraproject.org>
Sending translation for po/gu.po
2010-01-18 renault <renault@fedoraproject.org>
Sending translation for po/fr.po
2010-01-15 Daniel P. Berrange <berrange@redhat.com>
Added tag release-0.2.1 for changeset 13bcca43c859
Updates for 0.2.1 release
2010-01-13 raven <raven@fedoraproject.org>
Sending translation for Polish
2010-01-12 Daniel P. Berrange <berrange@redhat.com>
Add message dialog displays for important error scenarios
Fix warning with default widget focus in auth dialog
Add dialog to alert user to unsuccessful authentication & retry Alert user if VNC server has no compatible auth methods Support VNC bell & cut text events
Turn on automake's silent build rules if available
Various cleanups for Glib/GTK and BZ 474213
2010-01-11 raven <raven@fedoraproject.org>
Sending translation for Polish
2010-01-11 Daniel P. Berrange <berrange@redhat.com>
Add 'pl' to LINGUAS. Remove accidentally committed .pot file and add it to .hgignore. Add RPM specfile magic for translations. Fix typo in about.glade URL
2010-01-11 raven <raven@fedoraproject.org>
Sending translation for po/pl.po
2010-01-11 Daniel P. Berrange <berrange@redhat.com>
Add support for i18n of the UI
Add all the boilerplate code required for doing i18n of the UI.
No translations available yet though
2009-08-15 Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
viewer: fix build on 'old' GTK2
Debian lenny has gtk2 2.12.12, which is missing gtk_widget_get_window.
Provide our own function if GTK2 <= 2.12 .
Highly inspired from: http://osdir.com/ml/svn-commits-list/2009-08/msg00725.html
2009-07-29 Daniel P. Berrange <berrange@redhat.com>
Added tag release-0.2.0 for changeset b38a2c67ebfd
Update for 0.2.0 release
Disable compile errors in plugin till we figure out what's up with the header files
Update deps in rpm
Ensure VNC display is centered if being scaled
Ensure password is not echoed
Add support for libvirt graphical auth
Pull auth code out into separate file
2009-07-28 Daniel P. Berrange <berrange@redhat.com>
Make plugin work again
Add compatability logic for drivers without domain event support
Fix mouse / key grab vs modifier disabling mixup
Pull glib event loop integration into tree until libvirt-glib is more mature
Re-write the way scaling/resizing works
* Default to auto-resize mode where we try to fit the VNC widget 1:1 in the main window
* If local desktop is not large enough for VNC widget, scale down, maintaining aspect ratio
* Allow the user to turn off auto-resize and have total manual control over window size
* Always scale the display in fullscreen mode
Add a --debug command line flag
Fix waiting for a VM that does not initially exist
Move most of viewer code out into viewer.c
2008-11-28 Daniel P. Berrange <berrange@redhat.com>
Initial mingw32 build support
Use g_strdup & friends
Remove unused usleep code
2008-11-26 Daniel P. Berrange <berrange@redhat.com>
Re-write completely to use Glade, libvirt events, and libvirt-glib integration
2008-11-03 Daniel P. Berrange <berrange@redhat.com>
Fix rule to use DESTDIR on plugin install
2008-10-10 Richard W.M. Jones <rjones@redhat.com>
* configure.ac, src/Makefile.am, src/main.c, src/usleep.c: Support for building on Windows using MinGW compiler toolchain (or for cross-compiling using the same).
* .hgignore: Ignore some generated files.
2008-06-17 Daniel P. Berrange <berrange@redhat.com>
Add error message when conecting to inactive VM (Hiroyuki Kaguchi)
2008-04-28 Daniel P. Berrange <berrange@redhat.com>
Use GTK apis for option parsing (Guido G\374nther)
2008-04-24 Daniel P. Berrange <berrange@redhat.com>
Avoid caching inactive domain to workaround issues with older XenD (Hiroyuki Kaguchi)
2008-04-22 Daniel P. Berrange <berrange@redhat.com>
Call gtk_init early to ensure it grabs args like --sync
2008-04-08 Daniel P. Berrange <berrange@redhat.com>
Fix manpage typo
2008-03-21 Daniel P. Berrange <berrange@redhat.com>
Bump GTK dep to 2.10.0
2008-03-10 Daniel P. Berrange <berrange@redhat.com>
Added tag release-0.0.3 for changeset 05f9c167354b
Refresh news / changelog for release
2008-03-09 Daniel P. Berrange <berrange@redhat.com>
Added -plugin sub RPM, disabled by default, except for autobuild
2008-03-08 Daniel P. Berrange <berrange@redhat.com>
Relax firefox plugin version to 1.5.0
2008-03-07 Daniel P. Berrange <berrange@redhat.com>
Disable scaling by default if running on composited window
Block view menu accelerator & remove debug
Added support for desktop scaling with OpenGL
2008-03-05 Daniel P. Berrange <berrange@redhat.com>
Kill automake portability warnings. Use a config.h Cleanup misc build issues. Build with fatal compile warnings
Disable menu accelerators when keyboard is grabbed (Chris Lalancett)
Fix type in autogen.sh output (Chris Lalancett)
2008-01-25 Daniel P. Berrange <berrange@redhat.com>
Added browser plugin (Richard Jones)
Refactor main method for viewer to prepare for plugin (Richard Jones
2008-01-11 Daniel P. Berrange <berrange@redhat.com>
Whitespace fix
Hide chars in passwd field
Fix a few typos (Atsushi SAKAI)
2007-11-29 Daniel P. Berrange <berrange@redhat.com>
Use proper domain name in title bar, rather than VNC server title
2007-08-29 Daniel P. Berrange <berrange@redhat.com>
Added tag release-0.0.2 for changeset f3accb51c6f5
Fix crash with no transport
New release 0.0.2
Document the '--direct' option
Support TLS credentials & improved SSH tunnelling
Support for connecting over an SSH tunnel
2007-08-28 Daniel P. Berrange <berrange@redhat.com>
Merge
Added initial ability to connect remote hosts
Disable debug flag
Fixed delete-event handler args
2007-08-16 Daniel P. Berrange <berrange@redhat.com>
Added COPYING/INSTALL files
Added tag release-0.0.1 for changeset 2b78ab2d18ce
Fixed build requires & group. Removed exclusivearch
Fill out authors, news & readme
2007-07-21 Daniel P. Berrange <berrange@redhat.com>
Connected up screenshot & about menus
2007-07-20 Daniel P. Berrange <berrange@redhat.com>
Added manual page
Initial commit